veslařský materiál zlodě zvesla znářadí zčluny zvleky na lodě zveslařský bazén
Post on 29-Mar-2015
217 Views
Preview:
TRANSCRIPT
Veslařský materiál
lodě vesla nářadí čluny vleky na lodě veslařský bazén
Construction:Olympia XThe hull is made in sandwich construction with Carbon Nomex Honeycombs..Our sandwich laminate is pressed together by using vacuum technologies, which is increasing the stiffness.
Riggers:Riggers:Carbon 2-stay riggerCarbon 2-stay rigger
Karbon: krakorce, kačena, slajd Karbon: krakorce, kačena, slajd ( několik velikostí..)( několik velikostí..)Cena: Cena: skif 6 700,- € (bez DPH)skif 6 700,- € (bez DPH) dělená osma 20 800,- (alum. krakorce)dělená osma 20 800,- (alum. krakorce) karbonové krakorce: 880 €/1 párkarbonové krakorce: 880 €/1 pár
Junior: These boat is made in two pieces, totally hand laminated in glass fibre. The cockpit and the hull piece are sticked together.
Cena: 1 600 €
Construction::Touring boats are made out of a glass fiber laminate, which is reinforced by Kevlar. The interior is made in sandwich decks and bulkheads, which increases the boat buoyancy. Carbon reinforced wooden ribs increase the boat stiffness
Cena: Cena: Skul 3 800 € (+ 450 sandwich )Skul 3 800 € (+ 450 sandwich )Skul s 4950 € (+ 1200)Skul s 4950 € (+ 1200)
performance connection recovery support no slippage
Cena: 75 €/1 pár
accuracy of 0.25°
Blades.from 0 to 7°
footstretcherfootstretcherfrom 38 to 45°. from 38 to 45°.
accuracy of 2mm or less
range of boat from 350 to 700mmfrom 350 to 700mm
accuracy of 2mm or less
height range from 130 to 200mm from 130 to 200mm .
With beginning of 2002 BBG became official distributor for DREHER oars
APEX Blade 816 cmAPEX Blade 816 cm22
Cena: Cena: 460 USD460 USD 445 €445 €
The theory of a smooth faced blade causing less disturbance to the flow of water over the front face of the blade seemed to us to be in direct contradiction to basic hydrodynamic theory. Potential gains in hydrodynamic lift could be achieved if the back, not the front face of the blade, is free of impediments to the smooth movement of water in the direction of flow. It is not the front, but the back of the blade with its longer curved surface that accelerates the water flow and should provide a lifting force as the blade traverses out to the 90 degree stall position and back again during each stroke. By making the back surface "smooth" with the spine, or shaft attaching ridge parallel to the water flow, the blade would be more efficient and easier to handle.
Cena: Cena: 325 USD325 USD 310 €310 €
Obaly na vesla:Obaly na vesla:párová 30 € párová 30 € nepárová 35 €nepárová 35 €
soft soft yes small (s), medium (m), large (l)
medium medium yes small (s), medium (m), large (l)
stiff stiff yes small (s), medium (m), large (l)
Typ Tvrdost Nast. dél. Tlošťka rukojetiTyp Tvrdost Nast. dél. Tlošťka rukojeti
APEX-REX 742,5 cmAPEX-REX 742,5 cm22
Cena: Cena: 665 USD665 USD 560 €560 €
„„Sekyrky“ pro mládežSekyrky“ pro mládež Cena:Cena: 340 € 340 €
„„Macon“ pro mládežMacon“ pro mládežCena:Cena: 340 € 340 €
CD-X the all-white Kevlar composite
Custom * Special in stained-black wood
Available for Empacher, Sims & Vespoli (others to follow).
AeRowFin©AeRowFin© is all about is all about precision coxing, drag precision coxing, drag reduction and performance reduction and performance enhancement.enhancement.All in one beautifully-All in one beautifully-finished, high-tech Carbon finished, high-tech Carbon compositecomposite. .
Custom Single (mahogany hull/cedar deck, all fittings)
Ł4500-00
Custom * Special Single (the Custom of your dreams)
from Ł4900-00
CD-X Single (Kevlar composite, white finish, all fittings)
Ł3900-00
CD-XL Single: the only true sized 125kg 1x(Kevlar composite, white finish, all fittings)
Ł4900-00
Custom Double or Pair (as single) Ł7040-00
Custom * Special Double or Pair (as single) from Ł7560-00
HUDSON BOATSHUDSON BOATS
5:19.85 World's Fastest 2000 Meter Of All Time, US Men's Eight, Athen's 2004
ConstructionThe elite model is a prepreg carbon fiber and honeycomb core sandwich construction designed specifically for torsion/longitudinal stiffness while adhering to strict weight restrictions.
HUDSON BOATSHUDSON BOATS
HUDSON BOATSHUDSON BOATS
BOAT ELITE SPORT
Single $8,175 $6,350
Pair $12,100 $11,100
Double $12,400 $11,400
Double / Pair $13,250 $12,250
Coxed Four $16,950 $15,800
Four $16,850 $15,600
Quad $17,500 $16,250
Quad / Four $18,500 $17,250
Eight $29,250 $26,250
HUDSON BOATSHUDSON BOATS
ConstructionThe sport single model is multiple layers of carbon fiber laminated together in the infusion process to produce a single skin allowing for increased hull durability. These shells are intended to be used for the more non competitive level because some of the performance characteristics such as torsion/longitudinal stiffness and added weight have been slightly compromised for durability.
HUDSON BOATSHUDSON BOATS
Recreational ( CAD )
T - 6 1x $2,495
T - 7 2x $3,895
T - 11 4x$13,79
5
HUDSON BOATSHUDSON BOATS
Complete wing rigger (sweep) - Includes pin, oarlock and backsay $400.00
HUDSON BOATSHUDSON BOATS
Complete wing rigger (scull) - Includes pin and oarlock $550.00
HUDSON BOATSHUDSON BOATS
Four/Eight Breakaway Fin (Mid 2005)
Price: $33.00
HUDSON BOATSHUDSON BOATS
Four rudder (angled for use on model with rudder positioned at stern)
Price: $25.00
About 2000 boats are produced annually. This ranks Flying Eagle as one of the largest rowing shell manufacturers in the world, as well as the largest in China. Flying Eagle has 56000 square meters of work shops and hi-tech facilities to produce rowing, kayak, canoeing, sailing and motor boats.
Engineers and Technicians from WinTech Racing have been on the ground in China for over 10 months as a continual presence Bruce Kirby (USA) G-Boards (Australia)Bruce Kirby (USA) G-Boards (Australia)Klaus Filter, a man revered in Europe, Asia and Klaus Filter, a man revered in Europe, Asia and Australia as the sport's most prolific and successful Australia as the sport's most prolific and successful hull designer, is almost unknown to American rowers hull designer, is almost unknown to American rowers
Shell: sandwich structure with Kevlar,Carbon fiber and Nomex paper Honeycomb.
- colour : white- colour : white- lenght : cm. 6,55- lenght : cm. 6,55- width : cm.2,44- width : cm.2,44- weight : kg.300- weight : kg.300
The Slick Blade has no ridgeline so there is less splash at the catch. The low volume blade enters the water quickly and quietly The gentle The gentle asymmetric curvature of the blade asymmetric curvature of the blade assures a clean release from the water assures a clean release from the water with every stroke. Slick Blades are with every stroke. Slick Blades are visibly cleaner than other blades. visibly cleaner than other blades.
The Droop Snoot Sculling Blade.The ridgeline is not in line with the shaft. The ridgeline is almost horizontal and hence the blade is more stable through the stroke
The Cleaver Sculling Blade was first introduced in 1992. It is identical in curvature to the Droop Snoot but does not have the benefits of the horizontal ridgeline
Macon Sculling BladesThe Macon blades are the original blade design. This blade was first manufactured in timber. Although the Macon blade is not used in the racing world, recreational rowers prefer them and they are a good blade for learners.
The handles are avaliable in three sizes small medium and large:
Small handle fit pink gripMedium handle fit yellow grip and blue gripLarge handle fit grey grip and green grip
Sweep Scull
Fat Smoothie 27x54cm*Smoothie 25x54cmBig Blade 25x52cmBig Blade 25x55cmMacon MMacon LMacon XL
Fat Smoothie 23x46cm*Smoothie 21x46cmBig Blade 21x43cmMacon MMacon L
*(The Fat Smoothie can only be made with the Vortex edge.)
This picture is one frame of an overhead video taken from a bridge. The boat is shown on the bottom and is moving from left to right. The red dots mark the tip of the blade at each frame of the video.
top related