w-tec 3d hinge
Post on 12-Jul-2015
1.181 Views
Preview:
TRANSCRIPT
Turn ideas into reality.
W-Tec 3D - Product PresentationW-Tec 3D - Product Presentation
Turn ideas into reality.
W-Tec 3D isW-Tec 3D isa family of hinges.a family of hinges.
W-Tec 3D 40W-Tec 3D 40 W-Tec 3D 100W-Tec 3D 100 W-Tec 3D 140W-Tec 3D 140
Turn ideas into reality.
W-Tec 3D isW-Tec 3D isa family of hinges.a family of hinges.
W-Tec 3D 40W-Tec 3D 40
Turn ideas into reality.
W-Tec 3D isW-Tec 3D isa family of hinges.a family of hinges.
W-Tec 3D 100W-Tec 3D 100
Turn ideas into reality.
W-Tec 3D isW-Tec 3D isa family of hinges.a family of hinges.
W-Tec 3D 140W-Tec 3D 140
Turn ideas into reality.
W-Tec 3D isW-Tec 3D isa family of hinges.a family of hinges.
Hinge ModelHinge ModelMax. LoadMax. Load
with 2 hingeswith 2 hinges
Max. LoadMax. Load
with 3 hingeswith 3 hinges
W-Tec 3D 40 30 Kg 40 Kg
W-Tec 3D 10080 Kg 100 Kg
W-Tec 3D 140120 Kg 140 Kg
Turn ideas into reality.
W-Tec 3D isW-Tec 3D ispivoting on 7 axis.pivoting on 7 axis.
Turn ideas into reality.
W-Tec 3D isW-Tec 3D ispivoting on 7 axis.pivoting on 7 axis.
Turn ideas into reality.
W-Tec 3D isW-Tec 3D issymmetrical.symmetrical.
Hinge ModelHinge Model HeightHeight WidthWidth DepthDepth
W-Tec 3D 40 120 mm 26 mm4,5 mm
22,5 mm
W-Tec 3D 100160 mm 30 mm
7 mm
31 mm
W-Tec 3D 140200 mm 32 mm
8 mm
33,5 mm
Turn ideas into reality.
W-Tec 3D isW-Tec 3D isadjustable on 3 axes.adjustable on 3 axes.
W-Tec 3D 40
Horizontal adjustmentx +/- 2 mm: act on screws 1 and 2 with a CH 3 mm hex key,turning screws 1 and 2 1/4 of a turn in succession.
Height adjustment y +/- 2 mm: Loosen screws 3 and 4 with a CH 3 mm hex key, then insert the hex key into screw 5 and turn it until you reach the adjustment you desire. Then fasten screws 3 and 4 once again.
Gasket pressure adjustment z +/- 1 mm: loosen screw 6 with a CH 3mm hex key. Then insert the Allen key into hole 7, and turn it until you reach the adjustment you desire. Then fasten screw 6 once again
Turn ideas into reality.
W-Tec 3D isW-Tec 3D isadjustable on 3 axes.adjustable on 3 axes.
W-Tec 3D 100 and 140
Horizontal adjustment x +3/-2 mm: act on screws 1 and 2 with a CH 4 mm Allen key, turning screws 1 and 2 ¼ of a turn in succession.
Height adjustment y +/- 3 mm: Loosen screw 3 with a CH 4 mm Allen key, then insert the Allen key into screw 4 and turn it until you reach the adjustment you desire. Then fasten screw 3 once again.
Gasket pressure adjustment z +/- 1 mm: loosen screws 5 and 6 with a CH 4 mm Allen key. Then insert the Allen key into holes 7 and 8, turning them alternately 1/4 of a turn until you reach the adjustment you desire. Fasten screws 5 and 6 once again.
Turn ideas into reality.
W-Tec 3D isW-Tec 3D isadjustable on 3 axes.adjustable on 3 axes.
Hinge ModelHinge Model HorizontalHorizontal HightHight GasketGasket
W-Tec 3D 40 +/- 2 mm +/- 2 mm+/- 1 mm
W-Tec 3D 100+3 / -2 mm +/- 3 mm +/- 1 mm
W-Tec 3D 140+3 / -2 mm +/- 3 mm +/- 1 mm
Turn ideas into reality.
W-Tec 3D isW-Tec 3D isadjustable on 3 axes.adjustable on 3 axes.
The spiral of ArchimedesThe spiral of Archimedes
Turn ideas into reality.
W-Tec 3D isW-Tec 3D isadjustable on 3 axes.adjustable on 3 axes.
Only one person is needed to adjust the hinges All the adjustments are mechanical All the adjustments are independent of each other All the adjustments can be made with the same hex-key The hex-key enters almost 1 cm inside the screw Using the screws you can make fine adjustments of 0,5 mm; you
can be very precise
Turn ideas into reality.
W-Tec 3D isW-Tec 3D isavailable in 3 finishings.available in 3 finishings.
Matt Nickel
Matt Chrome
Satin Steel
Turn ideas into reality.
W-Tec 3D hasW-Tec 3D hasonly one jig for door and frame.only one jig for door and frame.
Turn ideas into reality.
W-Tec 3D isW-Tec 3D issuitable for all frames.suitable for all frames.
Solid frame Covered Frame Steel Frame
Turn ideas into reality.
Thank you
top related