analog semiconductor ic - anasem 安納森 official homepage · brpn (vdd=3.3v) magnetic flux...
TRANSCRIPT
(IMPORTANT: Please check the last page for Genuine Product Labeling)
Website: www.anasemi.com Tel: +852-3590-8442 Email: [email protected]
Low current consumption, 3.0mT High sensitivity
CMOS Hall Magnetic Sensor Switch
HMX3033H Series
Rev. E13-01
Analog Semiconductor IC
.......... Future of the analog world
AnaSem
AnaSem 安纳森安纳森安纳森安纳森
AnaSem 1
AnaSem
Rev. E13-01
Products Data Sheet
Analog Semiconductor IC
.......... Future of the analog world www.anasemi.com [email protected]
Low current consumption, 3.0mT High sensitivity CMOS Hall Magnetic Sensor Switch
HMX3033H Series
GENERAL DESCRIPTIONS
HMX3033H series are monolithic ICs with built-in Hall magnet sensor element and CMOS switch. It becomes the non-contact switch with low current consumption, high sensitivity and reliability which is combined with magnet. A vertical magnetic field to the electrode of the package can be detected by an arbitrary polarity. (N pole ⇔ S pole)
FEATURES
� CMOS + Hall monolithic structure � Low current consumption ··············································································· � High-sensitivity ··············································································· � Operating temperature range ·························································· � Operating voltage range ································································ � Detection pulse driving cycle ································································ � Magnetic direction ································································································· � Detection magnetic field ·························································································· � Small package ································································
APPLICATIONS
� Detection of opening and closing : Mobile phone, Notebook PC, Microwave oven, Washing machine, Rice cooker, Refrigerator, Electronic dictionary, Digital camera, etc.
� Detection of position : Air cylinder, Antitheft window, Digital door lock, etc. � Detection of water level : Water purifier, Humidifier, Bidet, etc. � Detection of rotation : Water meter, Gas meter, Wattmeter, Speed meter, etc. � Power supply switch : Cordless phone, Electric toothbrush, etc.
HALOGEN
RoHS COMPLIANCE
5.0µA (VIN=3.3V, Ta=25°C) Typ. 3.0mT -40 ~ +85°C 1.6V ~ 6.0V Typ. 50msec with 50µsec width Omnipolar Hall Effect Switch Vertical direction of marked side of package (Electrode vertical both direction) SOT-23 (2.9×2.8×1.1mm)
AnaSem
Rev. E13-01 HMX3033H Series
Low current consumption, 3.0mT High sensitivity CMOS Hall Magnetic Sensor Switch
www.anasemi.com [email protected] .......... Future of the analog world
PRODUCTS NUMBERING GUIDE
PIN CONFIGURATION / MARKING SPECIFICATION
HMX3033H
30 : Typ. 3.0mT Detection sensitivity
Operating voltage 33 : 1.6V ~ 6.0V
A : CMOS output Design version
T : SOT-23 (2.9×2.8×1.1mm) Package form
H : Typ. 50msec with 25µsec width Detection pulse cycle
Pin Configuration
No. Symbol Descriptions
1 VIN Voltage input
2 VOUT Output
3 VSS Power ground
Marking Specification
Code Mark Contents
A H Series name
BC HA Products specification & version
D Internal rule Lot number
(Top view)
Vss
Vin
1 2
3
Vout
D
A B C D D D D
AnaSem
Rev. E13-01 HMX3033H Series
Low current consumption, 3.0mT High sensitivity CMOS Hall Magnetic Sensor Switch
www.anasemi.com [email protected] .......... Future of the analog world
BLOCK DIAGRAM
ABSOLUTE MAXIMUM RATINGS
Items Symbol Min. Typ. Max. Conditions Unit
Operating temperature TOPR -30 - +85 °C
Storage temperature TSTG -40 - +125 °C
Supply voltage VMAX VIN-0.3 - VIN+7.0 V
Assembly temp. condition TASY - 255 260 t=max:5sec/Tmax °C
TEST CIRCUIT
VSS
Latch circuit
Sampling circuit
CMOS drive circuit
Switch VOUT
VIN
Hall Plate
Dyn
amic
O
ffset
Can
celle
r
15pF (including probe capacitance)
VSS
N or S
VOUT
VIN
A
0.1 µF Dire
ctio
n of
mag
netic
fiel
d
N or S S or N
AnaSem
Rev. E13-01 HMX3033H Series
Low current consumption, 3.0mT High sensitivity CMOS Hall Magnetic Sensor Switch
www.anasemi.com [email protected] .......... Future of the analog world
ELECTRICAL CHARACTERISTICS
(Unless otherwise specified, VDD=3.3V, Ta=25°C)
Items Symbol Min. Typ. Max. Conditions Unit
Operating voltage VIN 1.6 3.3 6.0 V
Current consumption IAVG - 5.0 - Avg. current at VIN=3.3V µA
Detection pulse driving cycle Pc - 50 90 Pulse width : 1/1000 msec
“H”-level output voltage VOH VIN-0.4 - - IOH=-0.5mA V
“L”-level output voltage VOL - - 0.4 IOL=+0.5mA V
MAGNETIC CHARACTERISTICS
(Unless otherwise specified, VDD=3.3V, Ta=25°C)
Items Symbol Min. Typ. Max. Unit
Magnetic flux density at operating point (H→L) MBOPS 1.5* 3.0 5.0
mT MBOPN -5.0 -3.0 -1.5*
Magnetic flux density at release point (L→H) MBRPS 1.2 2.5 4.7*
mT MBRPN -4.7* -2.5 -1.2
Width of hysteresis MBHYS 0.3* 0.5 1.2* mT
Note : The values with [*] marks are guaranteed by design, not tested in production.
MAGNETIC-ELECTRIC CONVERSION CHARACTERISTIC
S-pole N-pole
VOUT
VOH
VOL
Magnetic flux density MBRPS MBOPS MBOPN MBRPN
MBHYS
0
MBHYS
AnaSem
Rev. E13-01 HMX3033H Series
Low current consumption, 3.0mT High sensitivity CMOS Hall Magnetic Sensor Switch
www.anasemi.com [email protected] .......... Future of the analog world
MAGNETIC FLUX DENSITY AND OUTPUT VOLTAGE LEVEL
Conditions Output level
Magnet & Power Magnet flux density
Magnet = OFF / Power = ON M = 0mT High-level
Magnet = ON / Power = ON M ≧ 5.0mT Low-level
Magnet = OFF / Power = ON M ≦ 1.2mT High-level
DETECTION PULSE DRIVING CYCLE (SAMPLING CYCLE)
OUTPUT SWITCHING TIMING CHART
IDD
IDD ON
IDD AVG (Typ.5.0µA)
IDD OFF
Awake (50µS)
Period (Typ. 50mS)
time
(VDD=3.3V)
Sleep (Output latched)
Sampling pulse
MBOP
MBRP
On
Off
Magnetic flux
VOUT H-level
L-level
MB
HY
S
Latch Latch Latch
(Typ. 3.0mT)
(Typ. 2.5mT)
AnaSem
Rev. E13-01 HMX3033H Series
Low current consumption, 3.0mT High sensitivity CMOS Hall Magnetic Sensor Switch
www.anasemi.com [email protected] .......... Future of the analog world
TYPICAL ELECTRIC CHARACTERISTICS
� Magnetic flux density vs. Input voltage � Magnetic flux density vs. Ambient temp.
-6.0
-4.0
-2.0
0.0
2.0
4.0
6.0
2.0 3.0 4.0 5.0 6.0
Input voltage (V)
BopS
BrpS
BopN
BrpN
(Ta=25°C) 6.0
-50 -25 25 50-6.0
-4.0
-2.0
0.0
2.0
4.0
0 75 100
Temperature (°C)
BopS
BrpS
BopN
BrpN
(VDD=3.3V)
Mag
netic
flux
den
sity
(m
T)
� Current consumption vs. Input voltage
� Sampling period vs. Input voltage
Mag
netic
flux
den
sity
(m
T)
0 10 20
30 40 50
60 70
80
90
2.0 3.0 4.0 5.0
Input voltage (V)
6.0
100 (Ta=25°C)
� Sampling period vs. Ambient temp.
-50 -25 0
5
10
15
20
0 25 50 75 100
Temperature (°C)
VDD=2.4VVDD=3.3V VDD=5.0V
Cur
rent
con
sum
ptio
n (µ
A)
0
5
10
15
20
2.0 3.0 4.0 5.0 6.0
Input voltage (V)
(Ta=25°C)
Cur
rent
con
sum
ptio
n (µ
A)
Sam
plin
g pe
riod
(mse
c)
0 10 20 30 40 50 60 70 80
100
-50 -25 0 25 50 75 100
Temperature (°C)
(VDD=3.3V)
Sam
plin
g pe
riod
(mse
c) 90
(VDD=3.3V)
� Current consumption vs. Ambient temp.
AnaSem
Rev. E13-01 HMX3033H Series
Low current consumption, 3.0mT High sensitivity CMOS Hall Magnetic Sensor Switch
www.anasemi.com [email protected] .......... Future of the analog world
PACKAGE DIMENSIONS (SOT-23)
0.4
0~0.
1
1.1~
1.3
2.9±0.2
+0.10 –0.15
(Unit : mm)
3~7°
0.16 +0.10 –0.15
0~0.
35
0~0.1
0.45
1.1~1.3 2.9±0.2
1.6±
0.15
1.9±0.2
0.95 0.95
0.65
+0.
10
–0.1
5
2.8±
0.2
0.65
+0.
10
–0.1
5
(Marked Side)
0.4 +0.10 –0.15 0.4 +0.10
–0.15
0.4 +0.10 –0.15
Recommended land pattern
2.4
1.0
0.8
1.9
0.95 0.95
1.0
0.8 0.8
1.0
Sensor center
1.1~
1.3
0~0.1
0.64
0.
56
AnaSem
Rev. E13-01 HMX3033H Series
Low current consumption, 3.0mT High sensitivity CMOS Hall Magnetic Sensor Switch
www.anasemi.com [email protected] .......... Future of the analog world
TAPING AND LOADING SPECIFICATIONS (SOT-23)
REEL DIMENSIONS (SOT-23)
(Unit : mm)
ø13
±0.5
ø
60±1
ø
178±
2
90°
120°
2.0±0.5
9.0±0.5 (3,000 pcs / reel)
(Unit : mm)
4.0±0.1
2.0±0.05
4.0±0.1
ø1.5 +0.1 –0
ø1.05±0.05 3.35±0.1
3.3±
0.1 3.
5±0.
05
1.75
±0.1
8.0±
0.2
1.65 max.
0.2±0.05
Taping direction
Mark Mark
AnaSem
www.anasemi.com [email protected]
AnaSem
AnaSem may change the products described in this data sheet, or may discontinue production or services without any notice in order to supply the best products through improve the design and performance. Customers are recommended to obtain the latest data or information before placing orders in order to make sure the data or information required is the newest. It is necessary for customers to fully understand the products described in this data sheet and to use it in accordance with its specifications. The products described in this data sheet are not intended to use for the apparatus which have influence on human lives due to the failure or malfunction of the products. AnaSem Corp. is not responsible for any support to customer’s application, product design, software performance, patent infringement or service. AnaSem Corp. does not disclose or imply a guarantee or description about being licensed based on patents, copy-rights, circuit location license, or other intellectual properties associated with the devices or combinations in which the products or service of AnaSem Corp. are used or can be used, or which cover the methods. Customers should not export, directly or indirectly, any products without obtaining required licenses and approvals in advance from appropriate government agencies.
AnaSem
www.anasemi.com [email protected]
.......... Future of the analog world
GENUINE PRODUCT LEGITIMATE LABEL DEFINITION
Green colored Circle “RoHS” Label Other specific customized Labels Ordinary Product Information Bar Our internal Outgoing Check Code 3 Code Our Internal QR Check Code 2 AnaSem Logo and Brand Name (Black color Logo) Our Internal Product Check Code 1 Genuine labels MUST include our
correct contact information as shown