ansaldo thomassen - cmu (2014)
TRANSCRIPT
-
8/10/2019 Ansaldo Thomassen - CMU (2014)
1/4
Conversions,Modificationsand Upgrades
We Set Power in Motion
-
8/10/2019 Ansaldo Thomassen - CMU (2014)
2/4
Conversions, Modifications and Upgrades
Ansaldo Thomassen is a company with extensive servicing
and improving GE heavy-duty gas turbines because of
its OEM heritage. With nearly 50 years of accumulated
knowledge and expertise we offer the market special
engineering solutions. Our conversion, modification and
upgrade solutions are based on increasing your gas
turbine power output, improving heat rate and reduce
emissions.
Compressor Upgrades
The compressor is a key part of the gas turbine. It makes
sure the air intake is stable and optimal to be led into the
combustion chamber. This means that the pressure is as
high as possible for more expansion in the turbine part, the
temperature of the air is as low as possible which leaves
more room for expansion of the air and the amount of air is
optimally high. These characteristics can all be optimized
with compressor upgrades. All modifications made to the
Conversions,Modificationsand Upgrades
compressor are meant to optimize airflow, temperature
and pressure resulting in a power increase and improved
heat rate.
Firing Temperature Upgrade
A huge part of the energy supplied by the gas turbine is
a result of expansion of air under the influence of heat
of combusted fuels in the combustion chamber. By
increasing this heat the power output can be increased, in
the meantime lowering the heat rate. Mutually beneficial.
ThomELT
To be able to withstand the increased pressure and
temperature and the increased wear which automatically
follows these extreme circumstances, your gas turbine
will need an upgrade with a ThomELT package. This
Thomassen Extended Lifetime-kit is a package consisting of
a few adaptations to certain parts of the gas turbine. These
adaptations include liner stops and heat resistant coatings.
-
8/10/2019 Ansaldo Thomassen - CMU (2014)
3/4
Hot Gas Path Upgrades
Primarily the hot gas path upgrades include a new and
clean effect on the parts. This restores the original output
and heat rate of the machine as if it were new. Also, the
parts which are exposed to more extreme temperatures
and pressures are improved by using special extra heat
resistant alloys. These alloys are resilient enough to
withstand the even more extreme circumstances resulting
from the firing temperature upgrade. Furthermore several
advanced sealing options are available.
Emission Control Upgrades
All emission control options are focused on lowering
NOx-emission. Within the category of emission control
upgrades we have several options: our own Thomassen
Dry Low NOx system as well as water injection and steam
injection options.
Thomassen Dry Low NOx system
The best possible option for NOx-reduction is ourThomassen Dry Low NOx system (T-DLN). This
Thomassen-design for the dry low NOx-system is based
on, and backwards compatible with, the OEM DLN-
system and can guarantee emissions below 25 ppm NOx
(emissions as low as 9 ppm are to be expected) complying
with nearly all environmental restrictions. Next to limiting
the NOx-emissions CO emissions drop as well, something
that does not happen with water or steam injection. More
information about our Thomassen Dry Low NOx system is
available on our technical product sheet.
Control System Upgrades
The latest generation of heavy-duty gas turbine controllers,
Ansaldo Thomassen TC-7, is covering every aspect of
turbine performance. Based on the proven design of
Simatics PCS7, the TC-7 is a digital control system that
takes advantage of an open-architecture design and
nonproprietary hardware, keeping maintenance costs to a
low while ensuring maximum performance. Furthermore
we are able to service your Speedtronic gas turbine
control system.
Gas Turbine Remanufacturing
Within our gas turbine remanufacturing program weintegrate custom solutions such as emission reductions,
control system upgrades and extended lifetime programs,
for example on the gas turbine rotor.
-
8/10/2019 Ansaldo Thomassen - CMU (2014)
4/4
Havelandseweg 8d 6991 GS Rheden
P.O. Box 95 6990 AB Rheden The Netherlands
T +31 26 497 5800 F +31 26 497 5857 E [email protected]
www.ansaldothomassen.nl
Ansaldo Thomassen
The power of thought is a remarkable thing. A brilliant mind can easily generate great ideas.
Like service solutions that benefit energy installations. Thats why we combine the engineering
capacity from our OEM background with the open-mindedness of an indepenedent service
provider. Giving tou sound advice and optimal service when it comes to repairing, reconditio-
ning, upgrading or servicing GE type gas turbines.
A single source solution offering the best of both worlds. We call it OSP, Original ServiceProvider. A great concept to engineer power installations worldwide to new levels. Because
improving our clients energy output sparks our minds as well. Our service and sales centers
are located in the Netherlands, Italy, India, the United Arab Emirates and Venezuela.
We Set Power in Motion.
V1-2014