antai solar catalog

•••• ••••••

• ••••••• ••••••••• .....•...

••••••••••• ••••••••••• • • • • •

• • • • • •

• •

• • • •• ••

• • • • •

• • • • • •

•• • • •

.. . ••

••••• • • • • • • • • • • • •

• ••••••••• ••••

• •••••

• • • • • •• •

• • • ••••• ••••• ... •

• • • •• • • • • •••• . . . . • • • • •••• • • • • • ••• •••• • •

• • • • • • • • • • • • • • • • • • • • • • • . • • ••• • • • ••• • •• • • • ••• •••• •

• ••• •• • • •••••• • • ••••••

• • •••• • • • •• •

... . • • • • • • • •• • • • • • • •• • •• • • • • • • •• • • • • • • •• • •

••• •

ANTAl ENTERPRISE Xiamen Antai New Energy Tech. Co., Ltd Fujian Zhangzhou Antai Aluminum Co., Ltd.

... ••••• ••••• • • • • • • •

•••••• • • • • •

••• •••

•

•• . . • • • • • • • • • •

•

Office Add: Room 402.No.21 Wanghai Road, Software Park II . Siming District. Xiamen.China

Factory Add: Guanshan industrial park Changtai County, Zhangzhou.China Tel: +86-592-5508277.+86-592-5508275.+86-592-5508276

Fax: +86-592-5508270

E-mail: [email protected]

www.antaisolar.com

... •••••

•

• • •

•

• •••

• • ••• ••• ••• ... • • • • • • • •

•

•• • • • • • • • • . . . . . . . . • ••••• • •••• • ••••• • •••• • •••• ••••• • • • • • • • • . . . . • • • •

• • • • • • • • • •

• • • • •

• ••

• • • •

• • • •

• ••

••• • •

• • • ••

•

• •

• • •

• • • •

• • ••• ••• ••• ••• •• •

• • • •• • ••••••••••

••••••••

••• • ••• • ••• • • •

.. • •

• • • • • • • ••

• ••• • ••• • ••• . ... • ••• • ••• • ••• • •••

• •• • ••• • ••

•

.. •• •• •• •• •• •• .. •• •• •• •• •• •• •• •• •• •• •• •• .. • ••

• •• •• •• •• •• •• •• ••

• •• • •• • •• • • •

•• •• .. •• •• •• •• •• •• ••

•••

• • • • •• • •• . .. • •• • •• • ••

• • •• •• • •• • •• •• • •• •• • • •• • • •• •• •• • • .. •• • •

• • • • • • • •• • •••

• ••• • •• • •• • •• . . • • •

• • • • . .

• • •

•

• ••••••• • •••••••••• • •••••••••••••• • ••••••••••••••• . ........... . • ••••••••••• • • • • • • • • • • • • • • ••

• •••• ••••• • ••••• . ... .

• ••• • •• • ••

••

• ••• • • • ••• • • ••• • •• • ••• • •• • • • • • • ••• • •

•• • •• • • • •

• •••••

• • • • •

• • • • •

•

• •• . .. • •• • •• ••• • • • • • •

•

• • • • • • ••

•

• • • ••

• •••• • ••••

• • • • •

. . . ....... . •• • ••••••• • • • • ••••••

• • • ••••• • ••• • ••••

• • • • • ...

• • • •

• • • • • •••

• •••••• • •••••••

. . . . . . . . . • • • • • • • • • ••••••••• • • • • • • • • •

•••••••• • •••••••• • • • • • • • •

••••• •••

• • • •••• • •••• • •••

• •

• •• • ••

•

• • • ••••• • •

• • •

• •••

• •

• • . . • • ••• • •• • •• • • • •

• . ••

••• • • • •

•••• • •••

• •• •••

ANTAl ENTERPRISE Xiamen Antai New Energy Tech. Co., Ltd and Fujian Zhangzhou Antai Aluminum Co., Ltd.

ABOUT

ANTAl ENTERPRISE Antai Enterprise, with registered capital of 60 million RMB and total investment of 120 million RMB, was founded in 2006 which owns two subsidiaries, namely Xiamen Antai New Energy Tech. Co., Ltd and Fujian Zhangzhou Antai Aluminum Co., Ltd.

Xi amen Antai New Energy Co., Ltd is mainly specializing in Solar Mounting System, Solar Panel Frame and other solar products. Since establishment, Antai New Energy has introduced advanced equipments and cooperated closely with many experts and institutes internationally, which makes our products are in high quality and earn reputation globally. Our products have been successfully sold to many countries and areas of Europe, American, Australia, Middle East, Southeast Asia, etc.

Fujian Zhangzhou Antai Aluminum Co., Ltd mainly specializes in making, processing and marketing various aluminum extrusions and profiles, which covers an area of 45,946 square meters, including the construction area of 33, 600 square meters. Antai Aluminum's products are separated into four categories, that is, Solar mounting rack & frame profiles, industrial profiles, building material profiles, and other kinds of industrial aluminum products.

Antai Solar, advocating development of green energy, pays more attention to the world science and technology development and take environment protection and sustainable development as our company' spriority task. We would like to work and make progress with you to promote the exploitation and application of the clean energy for prosperous and brilliant future I

Our Mission To develop and supply the most easiest, cost-effective and environmental-friendly Solar Mounting System for Solar Energy Industry.

Our Vision Contributing to the global sustainable energy development by reducing Carbon Emission to build a Clean World for future generations

Our Concept • Customer Oriented • Continuous Innovation • Pursuing Excellence

ii lii

Complete Supply Chain The whole processes from aluminum ingot casting, extrusion, anodizing, powder coating, heat insulation, sandblasting , precision finishing , testing & packaging , high-quality selection of raw materials , advanced equipment to the application of advanced technology and scientific management system have guaranteed Antai Solar mounting rack meet international standards.

lngols

melting Cmsting Billets + Homogenicc

Waste Water Treatment

Anodising I '

Aging

� Buy-off

-

Talent Excellent research and development team

Organization

Organization High-efficiency & collaborative team work system

------

\ \ I I I

Equipment

Details Strict control every detail

The international advanced level in the production

and processing equipment

High-efficiency & collaborative team work system, standardized & market-orient management and pursuing to optimize resources make our team keep dynamic and continue healthy growth.

Talent Our excellent R&D team is capable to supply customized products and service, we design product based on science to provide customers with low-cost, high-quality products.

Equipment We have introduced international advanced level of production and processing equipment and technical personnel. Our factory equipped with a variety of punching machine and high-precision & large-scale extruder and integrated with international advanced level equipment and surface chemical settlement

Details We are strict on control of every aspect and every process, from design to status of all aspects of manufacturing to perfect every detail, which make our product quality to the most outstanding one let our customers to feel our high-quality- control concept

Pitched Roof Mounting Rack Antai Solar Pitched Roof Mounting System, having simplicity, beauty and durability designed into every component, which streamlines construction and improves frame strength to greatly simplify solar panel installation. Its highly versatile design offers adjustability and expandability to suit any size job. It is suitable for Tile Roof, Metal Roof, Bitumen Roof and thin film solar panel.

Antai Solar Pitched Roof Mounting System backed by a 10 year warranty and is fully compliant with the Australian and other international standard on wind & snow load, making it suitable for a wide variety of building types and climatic zones.

Structurre

Features

Pitched Roof Mounting Rack I 011021

G) End Clamp

(2) T -moudle

@Splice

@Rail

® L-foot

®Frame

• Easy Installation The innovative of A TRack rails and T modules has greatly simplified the PV module installation

with a single tool- a Hexagon Key

• Diversified Application: Almost every type of framed solar module available from different manufactures can be

used with the universal racking system design.

• Expandability: The rail joiner can be used to extend the solar frame to any length required.

• Choice Quality Design guidelines enable code compliant installation in all wind and seismic zones maximum.

• Lifespan: All components are made of extruded aluminum and stainless steel. The high corrosion resistance

guarantees the maximum possible lifespan and is also completely recyclable.

• 10-Year Guarantee: Antai Solar provides a guarantee of 10 years on the durability of all components used.

Technique parameter • Installation site: Pitched roof

• Roof Slope: up to 45°

• Wind load: To AS1170.2-2002 and other international standard

• PV module: Framed or frameless

• Module orientation Landscape or portrait

• Material: extruded aluminum and stainless steel

• Color: natural

• Roof cladding: suitable for most types of cladding

• Module widths: Maximum 1.0m

• Module lengths: Maximum 2Om

• Warranty: 10 years durability on materials

Tile Roof Mounting Rack

AT-TYN-28

AT-TYN-21

AT-TYN-05

Rail Component

• Material: AL 6005 T5 Anodized Rail

• Standard length: 2560mm, 3400mm, 4200mm

• Color and length are customized

Splice Component

• Material: AL 6005 T5 Anodized Splice

• length: 200mm

• Come with 2* Head Bolt A2-70 M8*12


Mid Clamp Component

• Mid Clamp 35mm for 35mm thickness Solar Panel





• Material: AL 6005 T5 and Stainless steel 304

Pitched Roof Mounting Rack I 03/041

End Clamp Component

• End Clamp 35mm for 35mm thickness Solar Panel






AT-TYN-12

Mid Clamp (Thin Film) Component

• Material Anodized AL 6005 T5

• Compatible for thickness 6-10mm thin film panel


AT-TYN-35

End Clamp (Thin Film) Component

• Material: Anodized AL 6005 T5

• Compatible for thickness 6-10mm thin film panel


AT-TYN-33

Tile Roof Mounting Rack

AT-TYN-HOOK01

AT-TYN-HOOK02

AT-TYN-HOOK03

AT-TYN-HOOK04

AT-TYN-HOOK08

Roman Tile Hook Component

• Stainless Steel 304

• Sharp-point wood screw M8*80

• For portrait installation

Adjustable Tile Hook Component


• Sharp-point wood screw 8*80

• Adjustable height from 42-62mm

Standard Tile Roof Hook Component



• For heavy snow load





Hollow Tile Hook Component



AT-TYN-HOOKOS

AT-TYN-HOOK06

AT-TYN-HOOK07

Slate Tile Roof Hook09

Pitched Roof Mounting Rack I 05/061








• For Landscape installation




• For Landscape installation

Slate Tile Roof Hook Component



• For low snow loads and normal wind load

Flat Tile Roof Hook Component



Slate Tile Roof Hook1 0 • For low snow loads and normal wind load

Metal Roof Mounting Rack

AT-FWNY-05

AT-TYN-HANGER

AT-TYN-20

AT-TYN-25

Metal roof L-feet Component

• Aluminum Bracket

• Stainless steel 304 Bolt

• Rubber pad

Hanger Bolt Component

• Hanger Plate M 1 Ox200

• Material: Stainless Steel 304

Metal roof Klamp Lock 406 Component

• Aluminum 6005 T5,stainess steel 304

• Suitable for

-- Bluescope Klip-Lok 406

--Stratco Topdek 700

--Stramit Speed Deck 500

Metal roof Klamp Lock 700 Component

• Aluminum 6005 T5,stainess steel 304 and Rubber

• pad

Suitable for

--Biuescope kl maxima

--Biuescope klip-lok 700

--Fielders kingklip 700

Shingled Asphalt Mount1ng Rack

Flashina Plate Componenr

Material: Stainless Steel 304

AT-FLASHING01

Aluminum Post Component

•Aluminum 6005 T5 • Length: 160mm (can be customized)

AT-TYN-79

Hex Cap Nut Component

• Material: Hot galvanized steel 0235

• M8 Nut

Metal Roof Mounting Rack I Shingled AsphaltMounting Rack I 07/0BI

Shingled Asphalt Flashing Component

• Flashing Plate

• Aluminum Base

• Stainless steel 304 bolt

• Galvanized screw MSXSO

Flashina Plate Componenr

Material: aluminium

AT-FLASHING02

Aluminum Base Component

Material: aluminium alloy

AT-TYN-BASE

EPDM Pipe Collar Component

Material: EPDM Rubber

Klamp Lock Roof Mounts Headache-Free Solutions for Kliplok and many other similar type roofs

The Antai Solar Klamp-Locks are a multifunctional item designed to mount Kliplok and many other similar type roofs, they allow attachment of L-foot and fixed foot or PV module directly to most commercial-grade metal roofs without penetrating the metal on standing seam roofs. The design is simple, low cost, and very effective with minimum damage to the roof.

Klamp Lock Roof Mounts I 09/10 I

Technique parameter • Roof Type: Klip Lok 406, Kliplok ?OO,Speed Deck Ultra

• Mounting Method: Clamping

• Colour: Silver

• Compatibility: Tilt Legs, L Feet, Inter Clamp, End Clamp

• Material: Aluminum 6005 T5, Stainless Steel 304, EPDM Rubber

• Wind load: To AS Code 1170.2-2002

• Warranty: 10 years

Flat Roof Mounting Rack StrongHold Flat Roof Mounting System has been developed as a universal PV module mounting system for flat roof or open space ground installation. The system arrives with an adjustable tilt leg to optimize solar power generation. The innovative and the high degree of pre-assembly eliminate the need for on site cutting, welding and enables quick and easy field PV module installation.

Flat Roof Mounting Rack I t 1/121

Technique Parameter • Installation site: flat roof or open space ground

• Solar Panel Slope: up to 45°

• Wind load: To AS Code1170.2-2002

• PV module: Framed

• Module orientation: Portrait

• Module widths: suitable for all widths

• Support rail: extruded aluminum

• Color: natural


Flat Roof Mounting Rack

AT-TYN-28

AT-TYN-21

AT-TYN-05

AT-TYN-12

Rail Component


• Standard length:2560mm,3400mm,4200mm


Splice Component


•length: 200mm

• Come with 2* Head Bolt A2-70 M8* 12


Mid Clamp Component • Mid Clamp 35mm for 35mm thickness Solar Panel






End Clamp Component • End Clamp 35mm for 35mm thickness Solar Panel






� 'I

. . �

AT-TYN-03

AT-TYN-08

AT-TYN-Kiamp

Front Feet Component

Flat Roof Mounting Rack I t 31141

• Materiai:AL6005-T5,A2-70 bolt, galvanized

screw, Rubber pad

Rear Feet Component • Materiai:AL6005-T5,A2-70 bolt

• Adjustable tilt angel range:

--10-15 degree(length: 220mm)

--15-30 degree(length: 350mm)

--30-60 degree( length: 600mm)

Front Feet with Klamp Component • Materiai:AL6005-T5,A2-70 bolt, galvanized screw

• Suitable for

--Biuescope kl maxima

--Biuescope klip-lok 700

--Fielders kingklip 700

Rear Feet with Klamp Component • Materiai:AL6005-T5,A2-70 bolt • Adjustable tilt angel range:

--10-15 degree(length: 220mm) --15-30 degree( length: 350mm) --30-60 degree(length: 600mm)

• Suitable for --Biuescope kl maxima --Biuescope klip-lok 700 --Fielders kingklip 700

Non Penetrating Mounting Rack The ballast non-penetrating system is designed for PV mounting on a commercial or residential flat-roof. The system uses minimal parts, fewer tools, and installs in far less time than standard racking systems. It utilizes high strength aluminum components and corrosion resistant hardware for long term reliability . Variable ballast weight allows for local wind rating therefore requirements to be meet on an individual basis.

Technique Parameter • Installation Site: Flat roof

• Tilt Angle: 1 0-45deg

• Wind load: <60m/s

• Snow load :<1.2kn/m2


• Module orientation: Landscape or portrait

• Material: extruded aluminum and stainless steel

• Color: natural


AT-TYN-37

AT-TYN-12

13/14Fiat Roof Mounting Rack lt51t6l

Rail with cable slot Component o Material: AL 6005 TS Anodized Rail

o Standard length:2560mm,3400mm, 4200mm

o Color and length can be customized

Splice Component o Material: AL 6005 TS Anodized Splice

o Length: 200mm

o Come with 2* Head Bolt A2-70 M8* 12

o Color and length can be customized

T-Module Joiner Component • Materiai:AL6005-T5,A2-70 bolt

•Inner rail Joiner to strengthen fastness

AT-TYN-HOOKOS











• End Clamp 50mm for 50mm thickness Solar Panel AT-TYN-40 • Material: AL 6005 T5 and Stainless steel 304

Upper L-Connecter Component

• Materiai:AL6005-T5,A2-70 bolt and T module

AT-TYN-30-a

AT-TYN-30-b

AT-TYN-41-a

AT-TYN-41-b

AT-TYN-42

Bottom L-Connector Component

13/14Fiat Roof Mounting Rack l t7/tBI

• Materiai:AL6005-T5,A2-70 bolt, nut and T module

Angle Bracket Component • Materiai:AL6005-T5,A2-70 bolt and nut

Basic Rail Component • Materiai:AL6005-T5


Rectanaular Tube Componenr

• Materiai:AL6005-T5

• 55x55xl( length are customized)

Ground Mounting Rack Antai Solar Ground Mount is a design which realizes the huge free land solar PV plant installation with economic cost. By using many of our standard components, it saves you considerable time and effort.

Features • Quickest installation for large open area PV power

plant without land pre-flattening

• Direct drive the Grouding Screw I Pile into the

ground.

• Suitable for flat land, grassland and even small

mountain

• Economic Cost . 1

• Antai Solar provides a guarantee of 10 years on the 1

durability of all components used.

Technique parameter • Installation site: Open Ground

• Wind load Up to 60m/s

• PV module: Framed

• Module orientation: Landscape

• Material: extruded aluminum, stainless steel and

galvanized steel


Foundation option

t

A

······························· ········ ............... ........ ................ .................................. .. .......

))))))))))))))))))))))) ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) )

c

I

I

Ground Mounting Rack l t9/20 I

)))))) )))))))))) )))))))

B

((((((( )))))))

( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) )

D

Ground Mounting Rack

AT-TYN-28

AT-TYN-21

AT-TYN-05

AT-TYN-12

AT-TYN-28

Rail Component • Material: AL 6005 T5 Anodized Rail



Splice Component • Material: AL 6005 T5 Anodized Splice

• Length: 200mm

•Come with 2* Head Bolt A2-70 M8*12


Mid Clamp Component • Mid Clamp 35mm for 35mm thickness Solar Panel • Mid Clamp 40mm for 40mm thickness Solar Panel • Mid Clamp 45mm for 45mm thickness Solar Panel • Mid Clamp 46mm for 46mm thickness Solar Panel



End Clamp Component • End Clamp 35mm for 35mm thickness Solar Panel • End Clamp 40mm for 40mm thickness Solar Panel • End Clamp 45mm for 45mm thickness Solar Panel • End Clamp 46mm for 46mm thickness Solar Panel • End Clamp 50mm for 50mm thickness Solar Panel • Material: AL 6005 T5 and Stainless steel 304

L-Connector Component Materiai:AL6005-T5,A2-70 bolt

Steel Cap I (top and bottom) Component • Material: Hot galvanized steel 0235,A2-70 bolt

AT-TYN-TB2

AT-TYN-TB

AT-TYN-P

AT-TYN-RT

AT-TYN-Ubolt

AT-TYN-GS

Ground Mounting Rack 1211221

Steel Cap II (top and bottom) Component • Material: Hot galvanized steel 0235,A2-70 bolt

Slip Cap top (optional) Componen • Material: Hot galvanized steel 0235,A2-70 bolt

Pipe Component • Material: Hot galvanized steel 0235,A2-70 bolt

• Diameter 60mmx840mm



Rectan�ular Tube Componen • Material: Hot galvanized steel 0235,A2-70 bolt

• 40x40x 1860mm

U-Bolt Component • Material: Stainless steel A2-70 bolt, A2-70 Nuts

• U-bolt M12x76

Ground Screw Component • Material: Hot galvanized steel 0235

• OD 76xT3x1600mm with flange plate

Pile Terrace Mounting Rack II AntaiSolar Pile Terrace Mounting Rack is a ideal solution for large commercial and utility scale installations, it's suitable for both framed and frameless module. Made with quality, durable materials therefore this mount system has low system maintenance. As shipped with a high level of pre-assembled components this mount is capable to expedite mounting time in the field.

Features • Easy Installation: All parts are fully pre-assembled,reducing the construction lead time and labor

cost of large scale projects.

• Environmental friendly: No concrete foundations required, resulting in less environmental effects

to surrounding soil during installation

• Easy maintenance: Few component obstructions for ground maintenance

Technique parameter • Installation site: Open Ground

• Wind load: Up to 60m/s


• Adjustability:

Post height deviation: ± 15mm

Post angle deviation: ± 100

Post misplacement deviation: ± 20mm

Post verticality deviation: ± 20

• Soil Condition: Non-Sandy

• Module orientation: Portrait

• Material: extruded aluminum, stainless steel and Galvanized steel


Pile Terrace Mounting Rack 111231241

Pile Terrace Mounting Rack II

AT-TYN-28

Rail Component • Material: AL 6005 T5 Anodized Rail



Mid Clamp Component • Mid Clamp 35mm for 35mm thickness Solar Panel • Mid Clamp 40mm for 40mm thickness Solar Panel • Mid Clamp 45mm for 45mm thickness Solar Panel • Mid Clamp 46mm for 46mm thickness Solar Panel • Mid Clamp 50mm for 50mm thickness Solar Panel • Material: AL 6005 T5 and Stainless steel 304

End Clamp Component • End Clamp 35mm for 35mm thickness Solar Panel • End Clamp 40mm for 40mm thickness Solar Panel • End Clamp 45mm for 45mm thickness Solar Panel • End Clamp 46mm for 46mm thickness Solar Panel • End Clamp 50mm for 50mm thickness Solar Panel • Material: AL 6005 T5 and Stainless steel 304

Splice Component • Material: AL 6005 T5 Anodized

•length: 200mm

• Come with 12xgalvanized screw M8x20

C-Post Component • Material: AL 6005 T5 Anodized

• Foundation C Post 1 05x85

./

/J1" /' .

Post Cap Component • Material: AL 6005 T5 Anodized

Post Brace Component • Material: AL 6005 T5 Anodized

Beam-Support Component

Pile Terrace Mounting Rack 11125/261

• Material: AL 6005 T5 Anodized, A2-70 bolt,

A2-70 Nuts

Rectanaular Tube Component • Materiai:AL6005-T5

• 55x55xl( length are customized)

Side Clamp Component • Materiai:AL6005-T5,A2-70 bolt and T module

Pole Mounting Rack The pole mounting system allow the solar panel installation location with high flexible. The small on-grid or off-grid power station can be arranged in garden, on mountain, or beside the outdoor electrical house. The Structure is available for manu-adjustable angle according to the season changing.

Features • AntaiSolar Pole Mounting System is to install the

Panel on Single Pole

• Portrait or Landscape Orientation Panel Row

Installation

• Quick Mounting on Concrete Base or Ground Screw

• High Quality Components, Security, Long Life, Easy

Installation

Technique parameter • Installation Site: Open Field

• Adjustable Angle: 10-60 degrees

• Wind Load: 40m/s

• Snow Load: 1.4kg/m2

• PV Modules: Framed

• Module Orientation: Landscape or portrait

• Module Width: Any

• Material: Extruded aluminum and hot dipped

galvanized steels.

• Warranty: 10 years on material

Foundation option

I

I

I

I I

--- - --

Pole Mounting Rack 127/281

' '

' \

\

\

\

I

I

I

Pole Mounting Rack

AT-TYN-28

AT-TYN-21

AT-TYN-05

AT-TYN-12

Rail Component




Splice Component


•length: 200mm

• Come with 2* Head Bolt A2-70 M8*12













• Material: AL 6005 T5 and Stainless steel 304 AT-TYN-POLE

L -Connector Component

Pole Mounting Rack 129/30 I

• Materiai:AL6005-T5,A2-70 bolt, nut and T module

Adjustable Bar Component • Material: Hot galvanized steel 0235

• For Pole 6:30x30x375mm


Beam Component • Material: Hot galvanized steel 0235


• For Pole 8: 100x100x1960mm

C-Steel Component • Material: Hot galvanized steel 0235

•100x50x3000mm

Pole Component • Material: Hot galvanized steel 0235

• For Pole 6:00140x1510mm

• For Pole 8:00165x1510mm

Antaisolar Mounting Rack

Earthing System

Antaisolar Rail Earthling System is designed to create an electrical path to ground by just bonding earthing clip between PV module and rail, it eliminates the need to run ground wire to each individual module and reduce the amount of labor and materials used in installations.

Features • Easy installation: Simplify by placing earthing clip between PV modules and rails, no more running ground wire

to every PV module.

• Safe system: By using high standard conductive mater copper and stainless steel, Antaisolar Mounting Rack

Earthing System meet AS5033 and UL 467 requirement.

• Cost effective Simplify by bonding earthing clip to create electrical path to ground the amount of labor and

materials have been reduced.

Antai Rail Grounding System

Connect System to Equipment Ground Conductor

Bonding Jumper

Use Grounding Clip to bond Solar Modules to AT Rails

Ribs will penetrate Module and Rail Anodization and create Grounding Path through Rail

Antaisolar Mounting Rack

Earthing System

AT-TYN-LUG

AT-TYN-BJ

Antaisolar Mounting Rack Earthing System 131/321

Earthing Lug Component

• Tin-plated Copper Lug

• Stainless steel Ribs

• T -module& Bolt

Earthing Clip Component


Bonding Jumper Component

• Tin-plated braided copper wire

• Stainless steel Ribs

• T -module& Bolt

antai solar catalog

Documents