anti-microbial allows for a healthier community & and many more benefits!!

Email: [email protected] / Skype: c.beckman1 LinkedIn: http://www.linkedin.com/pub/chris-beckman/3b/799/907/

Twitter: @SeeBeckman

HTTP://www.WilkinsSolutions.com

HTTP://www.facebook.com/WilkinsSolutionsTennessee

Nashville, TN / (615) 669-FIT1 (3481)“Tennessee based Sales, Service and Accountability”

Chris Beckman

Multi-Family 2014

Anti-MicrobialFor the Health of your Community

http://www.linkedin.com/pub/chris-beckman/3b/799/907/

http://www.wilkinssolutions.com/


http://www.facebook.com/WilkinsSolutionsTennessee

Providing Affordable, Environmentally Safe, “GREEN”, Non-Toxic Antimicrobial Smart Coatings and Long-Lasting Hand & Clothing Sanitation Options

Leading Edge Preventative Germ & Bacteria Solutions for:

Multi-Family Housing

Affiliations & Resources

Infection Prevention (4 Layers)

Layer by Layer Recomendations

Surface Options Detail

Long Term Durability and

Ancillary Benefits

How the Products are Applied & Tested

More Resources

Topic Agenda

Surface Recontamination Shield

(SRS) Certifier

Affiliations & Resources

A Quiet BattleHealing Hands are Clean Hands S.I.C.K. Team

http://www.youtube.com/watch?v=0llFva91USU&feature=player_embedded

http://www.youtube.com/watch?v=4URyOx-YlL4

http://www.youtube.com/watch?v=FGBIEZWSt0c

http://www.youtube.com/watch?v=0llFva91USU&feature=player_embedded

http://www.youtube.com/watch?v=4URyOx-YlL4

http://www.youtube.com/watch?v=FGBIEZWSt0c

NEW Technology Enables this Anti-Microbialto be applied via a Electro Static System

that is TRULY Remarkable

It’s Delivery System

http://www.youtube.com/watch?v=pn0J05v1Jzk

NANO Technology

Mark Shaw ‘s Demonstration atTED Forum in Long Beach CA

February 2013

WARNING: This Video my inspire thoughts of themultitude of ways this product can be used…








4 Infection Prevention Layers

1. Hand Sanitization / Continuous Protection

2. Clothing Disinfection / Protection

3. Surface Cleaning / Disinfection

4. Surface Continuous Protectiono Antifouling and anti-adhesive coatingso Zwitterionic polymer biomimetic surfaceso Antimicrobial coatings and surface

technologies

CLEANING PROTOCOLS

• Antimicrobials are designed to enhance cleaning protocols not replace them.

• The technology allows for protection between cleanings.

• Environmentally safe providing a “GREEN” application and removing the need for chemical cleaning. (soap and water)

• Cost effective, reduces the need to buy expensive chemicals and decreased cleaning time for staff (as much as 66%).

Hand Sanitization / Protection

Why not Alcohol Based?


• Seek an Alcohol-free sanitizer safe for your hands and effective in providing you, employees, and customers proactive security from germs that can make you sick.

• Look for one that when applied creates a hydrogen bond to skin cells where applied. This bond locks the protection to the skin cell until its natural shed period of 24-60 hours is reached. (or until the skin cells have been shed through excessive hand washings. i.e. 10 washings)

Not all Non-Alcohol based sanitizers are the same…

The Active Ingredient in many other Non-Alcohol based sanitizers is Triclosan which is rated as a level 7 high hazard in the Safety Database Triclosan has been shown to accumulate biosolids in the environment, one of the top seven organic contaminants in waste water according to the National Toxicology Program. Triclosan leads to various problems with natural biological systems. Triclosan, when combined with chlorine e.g. from tap water, produces dioxins, a probable carcinogen in humans.

Triclosan is currently under review by the FDA due to possible health hazards.

Why switch?• In today's world, its about cost effective protection, to keep

everyone healthy. With budgets deciding how many employees it takes to perform a job, being healthy and able to work is more important then ever. The health risks that face educational staff is greater then ever.

• This is the most cutting edge technology in personal health protection….be it in a school, a fitness gym, an office, anywhere.

1. NON-TOXIC if swallowed, does not require poison control reporting.

2. NON-FLAMMABLE does not pose a safety risk

3. LONGEST LASTING sanitizer on the market

4. NON-DRYING of the skin, promotes healthy skin care

5. MOST COST EFFECTIVE alternative available






technologies

Clothing Disinfection/Protection

• Similar technology can be easily applied through the wash, as a side benefit it continually and proactively prevents odor, staining and deterioration.

• Application must be done separately from normal washing. Do not mix with regular detergent or bleach. New model washing machines have the capacity to integrate solutions.

• Invisible, hypoallergenic and non-toxic antimicrobial coating on fabrics that laundry detergents just can’t offer.

• Will not create adaptive organisms or “super bugs”.

Small Sample of Protection List

Organisms: Bacillus sp (vegetative cell), Corynebacterium diptheriae, Micrococcus

lutea, Micrococcus sp., Mycobacterium tuberculosis, Mycobacterium smegmatis,

Propionbacterium acnes, Staphylococcus aureus, Staphylococcus epidermidis,

Streptococcus faecalis, Streptococcus mutans, Streptococcus pneumonia,

Streptococcus pyogenes, Acinetobacter calcoaceticus, Aeromanas hydrophilia,

Citrobacter deversus, Citrobacterfreundi, Enterobacter aerogenes, Enterobacter

aglomerans, Enterbacter cloacae, Enterococcus, Escherichia coli, Klebsiella oxytoca,

Klebsiella pneumoniae, Klebsiella terrienca, Legionella pneumophila, Mrganella

morganii, Proteus mirabilis, Proteus vulgaris, Pseudomanas aeruginosa.

Germs: Pseudomonas fluorscens, Salmonella cholera suis, Salmonella typhimurium,

Serratia liguifaciens, Serratia marcescens, Xanthomonas campestris.

Viruses: Adenovirus Type II & IV, Bovine Adenovirus Type I & IV, Feline pneumonitis,

Herpes Simplex Type I. Herpes Simplex Type II, HIV-1 (AIDS), Influenza A2 (Aichi),

Influenza A2 (Asian), Influenza B, Mumps, Parinfluenza (Sendai), Rous Sarcoma,

reovirus Type I, Dimian Virus, Vaccinia.

Clothing Disinfection/Protection

• Creates an environmentally-friendly, non-toxic and hypoallergenic antimicrobial barrier on fabrics.

• Continually fights the growth of fabric bacteria, fungi and mold on washable fabrics.

• High-performance, non-leaching antimicrobial characteristics allow for proactive and constant prevention of odor, staining, and deterioration.

• One application lasts 90 days.• Invisible and odorless, should not affect the

appearance of fabrics






technologies

Surface Cleaning / Disinfection

Should be used prior to the application of long-lasting antimicrobial products. Use a hospital-grade cleaner disinfectant that kills at least 99.9999% of germs and bacteria on surfaces.

Pre-cleaning enhances the effectiveness of antimicrobial coatings by properly preparing surfaces for antimicrobial treatment.

• OSHA blood borne pathogen standard for HIV, HBV and HCV.• Tuberculocidal• Virucidal• Mildewstat / Fungicidal

It is also recommended for regular maintenance cleaning.

Surface Cleaning / Disinfection

• Disinfectant cleaner, at a minimum, should be effective against these commonly known illness-causing microorganisms across three categories:

1. Antibiotic-Resistant Bactericidal Activity

2. Bactericidal Activity

3. Virucidal Activity

Surface Cleaning / DisinfectionAntibiotic-Resistant Bactericidal Activity:

Community Associated Methicillin Resistant Staphylococcus aureus (CA-MRSA) (NRS 123) Genotype USA 400 (NRS384) Genotype USA 300, Methicillin resistant staphylococcus aureus (MRSA), (ATCC 33593), Vancomycin resistant Enterococcus faecalis (VRE), (ATCC 51575), Vancomycin intermediate resistant Staphylococcus aureus (VISA), (CDC Isolate 99287), Methicillin resistant Staphylococcus epidermidis (MRSE), (ATCC 51625)

Bactericidal Activity:

Staphylococcus aureus, (ATCC 6538), Pseudomonas aeruginosa, (ATCC 15442), Salmonella choleraesuis, (ATCC 10708), Escherichia coli, (ATCC 11229), Escherichia coli O157:H7, (ATCC 43895), Listeria monocytogenes, (ATCC 35152), Salmonella typhi, (ATCC 6539), Streptococcus pyogenes (Necrotizing Fasciitis-Group A) (V.A. Medical Center Isolate 04001), Yersinia enterocolitica, (ATCC 23715), Enterococcus francium, (ATCC 6569), Corynebacterium ammoniagenes, (ATCC 6871)

Virucidal Activity:

Avian Influenza A Virus (H3N2), (Avian Reassortant) (ATCC VR-2072), Avian Influenza Virus Type A (Turkey/WIS/66), (H9N2), SARS Associated Corona virus (ZeptoMetrix), Paramyxovirus (Mumps) (ATCC VR-1438), Hepatitis A Virus (HAV), Rhinovirus Type 39 (ATCC VR-340), Rotavirus

What is the residual kill time of most disinfectants?

Surface Recontamination can occur immediately after a thorough cleaning.

Some Disinfectants even require a “dwell time” to reach the log reduction advertised.

Disinfectants are Temporary!






technologies

Surface Continuous Protection

• Historical Evolution

o Antifouling and anti-adhesive coatings

o Zwitterionic polymer biomimetic surfaces (both positive & negative charged molecules)

o Antimicrobial coatings and surface technologies

DID YOU

KNOW?

Americans touch an average of 300 infected surfaces every 30 minutes.

One cell of staph can multiply into 17 million in just 48 hours.

A Study conducted at the University of Arizona found that the most germ-infected objects were:

1. Cell phones

2. Desktops

3. Water fountain handles

4. Computer keyboards

5. Computer mice


• “Perceived Cleanliness”

• Spot Cleaning when visible fluid or dirt appears

• Temporarily Disinfecting the surfaces based on protocol

• Toxic Shields – frequently reapplied

Common practices for reducing the exposure to pathogens on surfaces?






technologies

Antifouling and anti-adhesive surface coatings

• Poly(ethylene glycol) coatings (PEG)• Self-Assembled Monolayer (SAM)• Diamond-like carbon (DLC) films• Easy clean surfaces

• Pilkington Active <10 degrees contact angle• Pilkington Hydrotech >130 degrees contact angle

• BUT: It merely moves them elsewhere, where they will have to be dealt with by other microbicidal techniques.

Zwitterionic polymer biomimetic surfaces

• Mimic properties found in the lipid bilayers of biological membranes

• Zwitterionic surfaces are biocompatible and non-thrombogenic discouraging adhesion of cells, both mammalian and microbial

• BUT: Still do not fully address the problem of microbial contamination as they have no antimicrobial functionality.

Antimicrobial coatings and surface technologies

The 6 core technologies are:

1. Microbicide-releasing surfaces

2. Silver and silver-containing surfaces

3. Copper and copper alloy surfaces

4. Bacteriophage-modified surfaces

5. Polycationic antimicrobial surfaces

6. Light Activated Antimicrobial Agents (LAAAs)

1. Microbicide-releasing surfaces

• The most well known is Microban • Microban incorporates Triclosan (chloro-

dichlorophenoxy-phenol) a broad spectrum phenolic antimicrobial.

• BUT: It is only active against Bacteria, not virus, spores, or Volitile Organic Compounds (VOCs). It is toxic in aquatic systems and is an endocrine disruptor. Most concerning is that it degrades to Dioxin which is extremely hazardous to man.

2. Silver and silver-containing surfaces

• To date, few organisms have developed resistance towards the silver ion as an antimicrobial.

• BUT besides “expense” there are a couple of drawbacks:

1. They are non-permanent (leaching), relying on diffusible antimicrobials to which microbes can develop resistance.

2. Possible Ag ion cytotoxicity towards mammalian cells

3. Copper and copper alloy surfaces

• Brass is less effective than pure copper but still exhibits antimicrobial activity

• Alloys have improved aesthetic and mechanical properties and may be more suited to real world applications

• Door plates, handles and other surfaces could employ copper alloys, but it’s a relatively expensive solution

4. Bacteriophage-modified surfaces

• Bacteriophages are viruses that infect prokaryotic cells.

• Phages usually target individual species of bacteria, bind to their surface, inject their genetic material and replicate within the bacterial host.

• BUT they are not practical in general settings where specific targets may not be few enough and viruses, spores etc. are not addressed at all. Also of concern is Phage resistant strains.

5. Polyatomic Antimicrobial Surfaces

• Polyethyleneimines (PEIs)• A positively charged moiety is required—this

keeps the hydrophobic chains separated and erect from the surface, and also electrostatically attracts microbes, due to the net negative charge on their surface.

• BUT, their mechanical stability and longevity have not been described and it is still yet to be seen how well they might respond to the rigors of use and indeed cleaning in a clinical setting.

6. Light Activated Antimicrobial Agents (LAAAs)

• Photosensitiser (PDT Refinement)• PDT is a form of indirect phototherapy, in which light

is used as a means of activating the curative agent.

• Titanium Dioxide Photocatalysis • (Effective with UV or visible spectrum though doping.

eg. With Nitrogen or Tungsten oxide)• Shown to be benign to the environment and humans,

animals, birds, and aquatic systems. (No Toxicity)• Highest binding, permanent, unless removed through

abrasion• Active against: Bacteria, Viruses, Spores (i.e. mold,

mildew), VOCs and odors!


WSE Available Alternatives

•Silver: Agion

•Triclosan : Microban

•Quanternary Ammonium: Aegis

•Photocatalyst: EcoActive

Manufacturers

•Bio Protect

•Coating Specialist

•SRS (OxiTitan)

Applicators

Active Component(s) Zinc, Titanium Dioxide Ammonium Chloride Silver Ions Phenoxy Phenols (PCPP)Mode of Action Contact Photo-Oxidation Contact Dilute Chloride Salts Leaching Heavy Metal in H2O Leaching PoisonEffective Against:

Bacteria Active Bactericide Bacteriostatic Bactericide BactericideViruses Active Virucide Ineffective Against Non-

enveloped VirusesVirucide No

Spores Active Sporicide Fungistatic Sporicide NoVOCs All No No NoOdors All Bacterial only Bacterial Only Bacterial Only

Toxicity Risks To:Humans No High Toxicity to Skin and Eyes Bio-Accumulative Endocrine Disruptor

Animals & Birds No High Toxicity to Skin and Eyes Bio-Accumulative Endocrine DisruptorAquatic Systems No High Toxic, Zero Discharge

AllowedHighly Toxic, Bio-Accumulative

Toxic

Environmental Fate Risk None 5-Year Degradation Time Very High Degrades to DioxinResistant Bacteria Promotion No No Yes YesUV Damage Protection 95% No No NoMetal Corrosion Protection Yes Corrosive No NoHydrophilic Self-Cleaning Yes No No NoApplication Method Water based spray Spray Epoxy Paint Incorporated at ManufactureTreatable Surfaces All Substrates and Textiles

New or ExistingHard Surface or Textile Paintable Incorporated at Manufacture

Durability Very High Binding Removed by Surfactants (Detergents or Soap)

Incorporated Incorporated at Manufacture

Service Interval 6 mo. - 3 Years 1-3 months unless cleaned Repaint Item ReplacementRegulatory Guidance US EPA FIFRA 25B

Minimum Risk Pesticide Exempt From Registration

US EPA FIFRA Registered

US EPA Registered Currently Restricted for Review

US EPA Registered Under Regulatory Review EU banned

Antimicrobial Surface Coatings ComparisonSurface Photocatalyst Quaternary Ammonium Silver TriclosanCoating Class


A Professionally applied antimicrobial smart coating for continuous protection against bacteria, viruses, mold and fungi for a cleaner, healthier environment.

This coating is an energetic trap for microbes and Volatile Organic Compounds (VOCs) at a molecular level, completing their destruction through photocatalytic oxidation (PCO).

The best combinative surface solution available

Surface Recontamination Shield (SRS)


US Independent Lab Testing

The tests were designed to determine the efficacy of the antimicrobial coatings in the most adverse conditions by giving the bacteria the optimal growth environment. ALL LAB TESTS USED ONLY TYPICAL ARTIFICIAL ROOM LIGHTING. The presence of natural light or greater artificial lighting will increase the efficacy of the coating in bacterial, virus and VOC reduction.

Tests by leading US laboratories show strong, persistent and protective cleaning power in real world conditions: 98% reduction of deadly VRE bacteria in 15 minutes; prolonged virus reduction of 89% over 24 hours and strong reductions of MRSA and Staph; 91% reduction of C. difficile spores over 24 hours and 99% reduction of hydrogen sulfide over 24 hours.


SRS’s Multiple Attributes

•Antimicrobial---Continuously kill all microbes contacting the surface

•Superhydrophilic---Clean the surface continuously

•95% UV Protection---Protects any surface from sun damage

•Anti-Corrosive---Protect metals against corrosion

•VOC Elimination---Destroys Pollutants and Odors

•Lowest Comprehensive Cost - Economically Effective


Antimicrobial

SRS deactivates ALL dangerous microbes and restrains proliferation by damaging their components through radical oxidation.

This broad spectrum photo-mineralization of pathogens is continuous and permanent.

Does not cause resistant strains of microbes because its killing mechanism is strictly oxidative, not enzymic or antibiotic.

Antimicrobial coatings are protectants not disinfectants…they work in between cleanings.


SRS is Superhydrophilic


Self-Cleaning


SRS’s UV Protection

• The damaging rays of Ultraviolet (UV) light cause billions of dollars of damage to paints, plastics and textiles exposed to sunlight.

• The SRS works as sunscreen on surfaces


Oxy-Titan is Anti-Corrosive

SRS removes odors and breaks down dangerous VOCs and pollutants in the air.

This safe, persistent cleansing of the air occurs using both natural sunlight and, most importantly, visible light indoors.?

VOC & Odor Reduction


SRS….How long will it last? The coating can only be

removed by taking part of the substrate off through high friction polishing or abrasions.

One treatment will last up to 1 year.

Once the surface is dry the coating becomes one with the substrate and cannot be removed without removing the substrate


PCO™ Verification Ink

• A quick and easy visible quality check!

• Safe, water soluble, reaction dye

• The ink will change in a few minutes or less from blue to pink

• Color change is proof that the SRS is protecting the surface, killing bacteria and viruses and breaking down VOCs (the odor reduction is self evident)

SRS….How to prove the product is still working


Display the SAFE STAMP in your facilities to instantly communicate that additional precautions have been taken to ensure a healthy environment.

Messaging for your facility…


Original Sphere

Electrostatics OFF

Electrostatics ON

How the SRS is applied

Professional Electrostatic Spray System

Ensures efficacy of coverage

70 Times more coverage than conventional sprayers.

Treated surface dries in less than 30 seconds

40 Times greater than the force of gravity

Click pictures to view Videos

What is Electrostatic Spraying?

Training and Assisted Living FacilityProject Example

Electrostatic Spraying

Diamond Building Electrostatic Spraying

http://www.youtube.com/watch?v=RKHHAEisdHI

http://youtu.be/vkBrMtQHoeg

http://www.youtube.com/watch?feature=endscreen&v=vhevHij2yTU&NR=1

http://www.youtube.com/watch?v=A3ff7E1cy-M

Application Methods

Self Application: 800 sq/ft per gallon.

HVLP Application: 1200-1500 sq/ft per gallon

ESS Application: 3300-3600 sq/ft per gallon

Due to the droplet size each application process administers, the amount of coverage has considerable cost variance and volume of product use.

Comparative Cost for ESS Protection

• Triclosan (MicroBan) – EU Banned and under Regulatory Review in the U.S.

• Silver (Agion, HeiQ) > $1.50/sq. ft. (plus application fee)

• Quaternary Ammonium (Aegis, and 45 other registrants) Highly Toxic to skin and eyes and all aquatic systems [zero discharge allowed] > 2 cents/sq. ft. (plus application fee)

• Surface Photocatalyst (EcoActive and several private labels) < 5 cents/sq. ft. (plus application fee)


• Determine the IC needs including persons surfaces and areas to be treated.

• Assess hand, clothing and surface usage.

• Measure SQFT of footprint, walls, equipment, counters, desks, and other surfaces.

How we do a Project

More Information on Selecting Antimicrobials:

Household Cleaning - University of Nebraska- Lincoln

Selecting an Appropriate Sanitizer or Disinfectant - National Resource Center for Health and Safety in Child Care and Early Education

Cleaning Up Antimicrobial Hand Soaps - Johns Hopkins School of Public Health

Disinfection and Remediation Guidelines for Pools and Spas

- Centers for Disease Control and Prevention

Healthy Swimming - Centers for Disease Control and Prevention

Cleaning, Sanitizing, and Disinfecting in Child Care Settings

- National Resource Center for Health and Safety in Child Care and Early Education

http://lancaster.unl.edu/home/Articles/2002/HouseholdCleaning.htm

http://nrckids.org/CFOC3/PDFVersion/PDF_Color/CFOC3_J.pdf

http://www.jhsph.edu/publichealthnews/articles/2005/halden_soaps.html

http://www.cdc.gov/healthyswimming/disinfection_and_remediation.htm

http://www.cdc.gov/healthyswimming/disinfection_and_remediation.htm

http://www.cdc.gov/healthyswimming/

http://nrckids.org/CFOC3/HTMLVersion/Chapter03.html

http://nrckids.org/CFOC3/HTMLVersion/Chapter03.html

Surfaces and antimicrobial surface coatings in the epidemiology of HAIs

*Hospital Acquired Infections - HAIs)

Solution Analysis &

Design

Negotiation & Procurement Installation

AccountabilityService

1. Hospital Grade Cleansing/Disinfectant2. Non-Alcohol Based Hand Sanitizer/Protectant3. Disinfection/Antimicrobial Clothing Protection4. Continuous Antimicrobial Surface Protection

For More INFORMATION in how OXYTITAN can be of benefit to your [email protected] / 888-460-4050 / www.wilkinssolutions.com

mailto:[email protected]

59 59

[email protected]

www.wilkinssolutions.comwww.facebook/WilkinsSolutionsTennessee

mailto:[email protected]


anti-microbial allows for a healthier community & and many more benefits!!

Real Estate