anuja impex (1)

Upload: atul-mittal

Post on 13-Apr-2018

214 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/21/2019 Anuja Impex (1)

    1/2

    FIBRRETECH INDUSTRIESE-176, INDL. AREA KAVINAGAR, GHAZIABAD-201002

    PHONES: 2701977,2751981 M0BILE:9810450929

    To, Date: 18.12.07M/S Anuja Impex Pvt. Ltd.

    C-26,Industrial Area , Derabassi,P.O Mubarikpur,Distt. Mohali,Punjab

    Kind Attn.: Ms. VandanaSub: Quotation of PP/FRP tank

    Dear Sir,We are offering our techno-commercial quote as under:-

    S.No. Description Rates(Rs.)

    1. HCL gas holder ,Vertical PP / FRP tank ( 5 mmPP+10 mm FRP), 4 KL,Sizes:Dia 1400mmX

    height 2600mm ,conical top & bottom , includinginletolutlet nozzles, level indicator, outerreinforcement with M.S. strip rings with fourbrakets installation structure , sustain 2 kgs persquare cm pressure

    50,000.00

    Terms & Conditions

    1.Sales tax@ 3% against form C or @ 10% extra.

    2. Excise dutyNil.3. Lead time: 12 days after receipt of advance & P.O.

    4. Above prices ex-factory at Ghaziabad.5. Guarantee & warranty: We shall provide guarantee & warranty of FRP

    tank supplied for a period of twelve months from the commissioning dateor eighteen months from the date of supply whichever is earlier.

    6. Payments: 10% advance along with P.O ,80% after inspection & P.I.&

    10% after 30 days of receipt of material.

    With regards

    For FIBRETECH INDUSTRIES

    (ATUL KUMAR)

  • 7/21/2019 Anuja Impex (1)

    2/2

    DESIGN DATA FOR FRP TANKS

    MATERIALS OF CONSTRUCTIONResin Bisphenol & Isophtallic

    Reinforcement Glass Fibre (VetrotexSaint Gobain group)

    Outerreinforcement

    M.S stips 50mm x 5mm outer side rings reinforced withfiberglass .

    Fastners Hot dip galvanized iron.

    Nozzles,Flanges

    & Manhole

    All are made of PP + FRP,As per your requirements.

    DESIGN TEMPERATURE:

    PP can sustain temperature up to 90 degree C.

    DATA SHEET AND DRAWING:

    The FRP Tanks shall be manufactured to specified dimensions and materials

    Supplied with the parameters specified & approved in data sheet.

    A detailed drawing shall be provided for approval after finalization of order.

    INSPECTION & TESTING:

    The following test has to be carried out before dispatch:

    1.Hydro testwater filled.

    .