audiomonster manual

AUDIOMONSTERModel No. ANY1000

User,s Guide

PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

http://www.fineprint.cn

CONTENTS

1ENG

CHAPTER 1:

CHAPTER 2:

CHAPTER 3:

CHAPTER 4:

CHAPTER 5:

CHAPTER 6:

CHAPTER 7:

CHAPTER 8:

CHAPTER 9:

CHAPTER 10:

CHAPTER 11:

CHAPTER 12:

CHAPTER 13:

CHAPTER 14:

CHAPTER 15:

CHAPTER 16:

CHAPTER 17:

CHAPTER 18:

CHAPTER 19:

1

2

3

4

5

10

15

18

20

22

23

24

25

26

27

28

29

30

31

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS

PRECAUTIONS

PACKAGE CONTENTS

PARTS AND CONTROLS

BASIC OPERATIONS

SYSTEM SETUP

LANGUAGE SETUP

VIDEO SETUP

OPTICAL SETUP

DIGITAL SETUP

FM OPERATION

iPod OPERATION

USB AND CARD-READER OPERATION

BLUETOOTH OPERATION

AUDIO IN FUNCTION

AUDIO OUT FUNCTION

VIDEO OUT FUNCTION

OTHERS

General Introduction



2

Read these instructions - for all components before using this product.keep these instructions - for future reference.Heed all warnings - on the product and in owner,s guide.Follow all instructions.Do not use this apparatus near water or moisture - Do not use this product near a bathtub,washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, or anywhereelse that water or moisture are present.Clean only white a dry cloth. Unplug this product from the wall outlet before cleaning.Do not block any ventilation openings. Install in accordance with the manufacturer ,sinstructions - To ensure reliable operation of the product and to protect it from overheating, putthe product in a position and location that will not interfere with its production. For example, donot place the product on a bed, sofa, or similar surface that may block the ventilation openings.Do not put it in a built-in system, such as a bookcase or a cabinet that keep air from flowingthrough its ventilation openings.Do not install near any heat sources, such as radiators, heat registers, stoves or other apparatus( including amplifiers) that produce heat.Protect the power cord from being walked on or pinched, particularly at plugs, stoves or otherapparatus, and the point where they exit from the apparatus.Only use attachments/ accessories specified by the manufacturer.Use only with cart, stand, tripod, bracket or table specified by the manufacturer or sold with theapparatus. When a cart is used, use caution when moving the cart/ apparatus combination toavoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused for long periods of time - toprevent damage to this product.Refer all servicing to qualified service personnel. Servicing is required when the apparatus hasbeen damaged; liquid has been spilled or objects have fallen into the apparatus; theapparatus has been exposed to rain or moisture, does not operate normally, or has beendropped - Do not attempt to service this product yourself. Opening or removing covers mayexpose you to dangerous voltages or other hazards.

To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integralconvenience receptacles.

Do not let objects or liquids enter the product - as they may touch dangerous voltage points orshort-out parts that could result in a fire or electric shock.See product enclosure for safety related marking.Use proper power sources - Plug the product into a proper power source, as described in theoperating instructions or as marked on the product.

1

7

4

2

8

5

3

9

6

10

13

11

14

12

15

16

17

ENG General Introduction

IMPORTANT SAFETY INSTRUCTIONS



3

Thank you for purchasing this Multimedia Centre. Please read this manual carefully before

operating and reserve it for future reference. It will be helpful to you if you encounter any

operational problem.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED

WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. DANGEROUS

HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET.

REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

This Digital Video Disc player employs a Laser System. To ensure proper use of this

product, please read this owner s manual carefully and retain for future

reference. Should the unit require maintenance, contact an authorized service

location - see service procedure.

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

Use of controls, adjustments or the performance of procedures other than those

specified may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure.

Visible and invisible laser radiation when open and interlocks defeated.

DO NOT STARE INTO BEAM!

WARNING:

ATTENTION:

LASER:

PRECAUTIONS

ENGGeneral Introduction



4

PACKAGE CONTENTS

After unpacking, first check the contents of your DVD player package as listed below:

Note:Actual products, appearance might vary slightly from the pictures shown.

Operating Manual Remote Contro l

AV Cab le

iPod Dock Adapters

Power CordBluetooth Module(Opt ional)

FM Antenna

AN Y1000AUD IO M ON STE R

User ,s Guid e




5

Hold this button for 1~2 seconds to turn on or enter the standby mode. (Red LED will be lit. )

Press it to start/pause the playback.

Press it to stop the playback.

Press it to mute the audio.

In the mode menu state, they are used as left and right button. If not, they are used as volumecontrol button.

Press it to locate at the previous track or chapter when playing DVD , USB or Memory Card.

Press it to locate at the next track or chapter when playing

STANDBY button

PLAY/PAUSE

STOP

MUTE button

Volume button

PREVIOUS button

NEXT button

button

button

-/+

DOWN

UPMODE button

ENTER button

, iPodIn the menu state it is button.

DVD, iPod, USB or Memory Card. In themenu state it is button.

Press it to pop out the playing modes selecting menu: DVD, iPod, USB, Bluetooth, Memory Card,FM radio, AU1, AU2. The icon of media which is playing will be green around the frame and therethere will be a orange cursor at the bottom of icon to flash when you move to the icon.

Press it to confirm your selection.

Top panel

1

7

4

2

8

5

3

9

6

1 742 553 6 8 9

PARTS AND CONTROLS


AU1 AU2



6

Press it to turn on or turn off the power.Power ON / OFF Switch

Left side

OPEN buttonPush it to open the DVD player cover.

Right side

ON/OFF

OPEN




MODE

SETUP

RETURN VOL

SLEEP

AUDIO

OSD

TITLE

A-B

SEARCH

OK

MENU

+_

1 2 3

4 5 6

7 8 9

010+

SUB-TITLE

FM SCAN

MODE

SETUP

RETURN VOL

SLEEP

AUDIO

ONMY

VIDEOMY

PHOTOMY

MUSIC

OSD

TITLE

A-B

SEARCH

OK

MENU

+_

1 2 3

4 5 6

7 8 9

010+

SUB-TITLE

FM SCAN

7

Remote Control

10

14

11

1516

17

18

1920

23

2724

28

21

25

29

22

2630

1213

1

7

4

2

8

5

3

9

6




8

Press this button to turn on/ turn off the player.

Audio mute ON/OFF.

Press it to pop out the playing mode menu: DVD. iPod. USB. Bluetooth, Memory Card, FM radio,AU1,AU2. Then use left/right button to choose the mode and press to enter.

press this button to pop out the main menu of the playing media.

Press it to bring forth the main setup menu.

Press it to return to the last step operation.

Volume up. In the menu state it is RIGHT button.

Volume down. In the menu state it is LEFT button.

Enter the selected item.

Use these buttons to move the cursor up, down, left and right when selecting the setting items.

It is fast backward key when playing DVD, USB or Memory Card. (Invalid in iPod mode)

It is fast forward key when playing DVD, USB or Memory Card. (Invalid in iPod mode)

Play or pause the playback when playing DVD, iPod, USB or Memory Card.In the menu state it isUP button.

Jump to the PREVIOUS track or chapter when playing DVD , iPod, USB or Memory Card.

Jump to the NEXT track or chapter when playing DVD , iPod, USB or Memory Card.

Press this button to stop the playback, of DVD, iPod, USB or Memory Card.

Press these buttons to input numbers. (Invalid in iPod mode)

Press this button to repeat the playback. (Invalid in iPod mode)

Press this button to select the time (30min/ 60min/ 90min/ 120min/ OFF) for timer. The unit willbe off automatically.

In the FM radio state press it to scan the FM radio program.(Invalid in other mode.)

Press this button during the playback of DVD, USB, Memory Card to set two points and play thesection between them repeatly. (Invalid in iPod mode)

Press it to display the information of media which is playing. (Invalid in iPod mode)

ON/OFF

MUTE

MODE

OKMENU

SETUP

RETURN

VOL+

VOL-

OK

CURSOR buttons

NUMBER buttons

REPEAT button

SLEEP

FM SCAN

A-B

OSD

1

7

4

2

8

5

3

9

6

10

13

11

14

12

15

Key Description of Remote Control

16

17

18

19

20

21

22




9

Press it to switch the DVD,S subtitle language. (Invalid in other mode.)

Press it to switch the audio language during the playback of DVD.(Invalid in USB /Memory Cardmode.)

Locate a title/ chapter/ time to play, during the playback of USB or Memor y Card.(Invalid inother mode.)

press it to display the DVD,S title. (Invalid in other mode.)

It is the shortcut key for the iPod MUSIC playback.

It is the shortcut key for the iPod VIDEO playback and it is only useful for the iPod with video.

It is the shortcut key for the iPod PHOTO playback.

It is the shortcut key for entering bluethooth mode.

SUB-TITLE

AUDIO

SEARCH

TITLE

MY MUSIC

MY VIDEO

MY PHOTO

ON

23

29

24

27

25

28

26

30

Remote Control Information

Notes on using the remote control unitDo not drop or step on the remote control unit or subject itto shocks.Note that the remote control unit may not work if there areobstacles between it and the remote sensor.Do not expose the remote sensor to strong light. Doing somay make operation impossible.Use the remote control unit within the specified operatingrange.

To prevent leakage of fluid from the lithium battery, removethe battery when not using the remote control unit for longperiods of time (one month or more). If the battery leaks fluid,carefully wipe it out of the battery case, then change to anew lithium battery.

Note:

Caution:The battery may present a risk of fire if mistreated.Do not recharge ,disassemble, heat it above 100 C .Replace battery with the same type. Dispose of usedbattery properly, keep away from children and do notdispose it in fire.

0

Change thebattery from here




10

Connect the AC adapter to a socket.Connect the AC output plug of the adapter to the AC input jack on the back side of the mainunit.Press the power switch to turn on the power and hold on the button on the top keypadof the main unit for 1~2 seconds remote control to turn on the unit.

STANDBYor the button on the

Turn on the power

When the power is on, press the power switch to turn off the power.Unplug the power cord from the power outlet.Disconnect the AC adapter from the main unit,s AC input jack.

1

1

2

2

3

3

Turn off the power

BASIC OPERATIONS

1 Power ON/OFF Switch

2 AC input jack




11

Press the open button on the right side of main unit to open the DVD player cover.

Place in a disc and press it down with your fingers near the canter hole (Attention: Do not touchthe lens). A click is heard.

The playing mode menu will pop out on the screen and the cursor stops on the DVD icon. Pressbutton to begin playing DVD disc.OK

Notes:Set the disc securely. Failure to set it securely could result in damage. Do not use cracked orwarped discs. Doing so could result in damage. Place single-sided DVDs or CDs in with the label(Printed) side facing upwards.For double-sided DVDs, check each side carefully, then place the disc in securely (Until a click isheard).For CDs or one-sided DVDs, you do not have to worry about touching the label (Printed) side ofthe disc with your fingers. Since two-sided DVDs have signals recorded on both sides, be carefulnot to scratch them when removing them from the player.

1

2

Disc operation

OPEN button


3



MODE

SETUP

RETURN VOL

SLEEP

AUDIO

OSD

T ITLE

A-B

SEARCH

OK

MENU

+_

1 2 3

4 5 6

7 8 9

010+

SUB-T ITLE

FM SCAN

MODE

SETUP

RETURN VOL

SLEEP

AUDIO

ONMY

VIDEOMY

PHOTOMY

MUSIC

OSD

T ITLE

A-B

SEARCH

OK

MENU

+_

1 2 3

4 5 6

7 8 9

010+

SUB-T ITLE

FM SCAN

12

Turn on the power of player.Open the disc correctly.Insert a disc correctly.Close the cover.Press the standby button to turn on the unit andit will pop out the mode menu. DVD mode hasbeen chosen by the unit itself and pressbutton to confirm, the unit will load the disc andplay automatically. If not, please press thebutton.

OK

Press or button on the remote controlduring playback.The playback speed will be changed each timeyou press the or .The speed will be changed to 2X, 4X, 8X, 20X,1X each time you press the button.

Playback1

1

4

2

2

5

3

Press on the main unit broad or remote controlwhile playing.The player remembers the stopping place.To resume playback from the point where itstopped, just press key.To clear stopping mark, press again at stopstatus.The player will not play from the stopping placewhen pressing next time.

1

4

23

Stop playback

Press on the main unit board or on the remotecontrol during playback.Press again to resume normal playback.

1

2

Pause playback

Playing at fast speed

PLAY/PAUSE

STOPFWDFEV

ENG DVD Function



MODE

SETUP

RETURN VOL

SLEEP

AUDIO

OSD

T ITLE

A-B

SEARCH

OK

MENU

+_

1 2 3

4 5 6

7 8 9

010+

SUB-TITLE

FM SCAN

MODE

SETUP

RETURN VOL

SLEEP

AUDIO

ONMY

VIDEOMY

PHOTOMY

MUSIC

OSD

T ITLE

A-B

SEARCH

OK

MENU

+_

1 2 3

4 5 6

7 8 9

010+

SUB-TITLE

FM SCAN

13

Press the button on the remote control.Press the and buttons to move todesired section.Input valid number to choose specific time or title,chapter or track.Press button to play the specific scene.Press button to resume normal screen.

SEARCHUP, DOWN OK

OKSEARCH

Press the button on the remote controlduring the playback. You can select different audiolanguages included on the DVD video disc.

AUDIO

This DVD video player allows you to view theoperational status and disc,s information on screen.Press button on the remote control duringplayback. The disc,s information will be displayedon the screen.Press button again, the information willdisappear.

OSD

OSD

Search for a specific scene

Change the audio language

Use the OSD

1

1

1

4

2

2

5

3

3

A-B playbackWhen pressing button on the remote controlduring playback, the current point would belocated on the remote control, and REPEAT A-appears on the screen.Press button again, B point would be locatedand shown on the screen the playerwould play from A point to B point repeatedly.Press button again. playback would becancelled and shown on the screen,then the player resume normal playback.Repeat a Title, Chapter or Track.Press button on the remote control duringplayback.The chapter or the title(for DVD) and thetrack or entire disc (for CD) will be playedrepeatedly.The mode will be changedeach time when the repeat button is pressed.

A-B

A-BREPEAT A-B

A-B A-BA-B CANCEL

REPEAT

REPEAT

“ ”

A-B/REPEAT playback

1

2

REPEAT

SEARCHAUDIO

OSDA-B REPEAT

ENGDVD Function



14

Playing a MP3 format disc and JPEG CD

Playing the DivX files

Use to move the cursor to a folder, a file, MP3 ICON or JPEG ICON.In order to play MP3 files, move the cursor to MP3 ICON and press button to enter the Mp3 file.The move the cursor to choose the desired file and press to play.In order to play JPEG files, move the cursor to JPEG ICON and press button.Press or button to go back to the main menu.Press A-B button to get A-B REPEAT function. Press button to switch repeat mode(REP1,REPDIR REP ALL, REP OFF).

means repeating the track; means repeating the folder; means repeatingthe whole disc.

when you view the JPEG pictures you can use the arrows to rotate or flip thepictures.

UP/ DOWN/ LEFT/ RIGHTOK

OKOK

STOP RETURNREPEAT

REP1 REP DIR REP ALL

UP/DOWN/LEFT/RIGHTNote:

Your player is an official DivX Certified product that plays DivX.5, DivX.4, DivX.3, and DivX.VOD videocontent in compliance with DivX Certified technical requirements.

To guarantee playback of DivX files the audio must be MP3 format. DivX Certified devices can playany interleaved MP3 audio at any bitrate, both CBR and VBR. The audio must be sampled atstandard frequencies, such as 32 kHz, 44.1 kHz, and 48 kHz, and must conform to the AVI filespecification. Apart from MP3, the audio formats recognized by your player are MPEG layer 1 / 2 ,AC3, PCM. Formats such as AAC and Ogg Vorbis are not supported by this player.

Note:

Open the compartment by sliding the OPEN button to the right.Place the disc with the printed side facing up and close the compartment.A menu appears on the screen. Select a folder using the and buttons on the remotecontrol, then press to open the folder s contents.Select a file using the and buttons on the remote control.

To go back to the folder list, press button.Press to start playback.Press to stop playback.

UP DOWNOK

UP DOWN

LEFTNote:

1

4

2

56

3

0 0 1 . 0 0 80 0 2 . 0 1

00 3 . 0 5

00 4 . 09

1

4

2

3

Folder

Files

MP3 ICON

JPEG ICON

［］123 008.Mp3

0 1 . 1 2 3 0 0 1 . 0 0 80 0 2 . 0 1

0 0 3 . 0 5

0 0 4 . 0 9

1

4

2

3

［］- VOLTEFAC.AVI

0 1 . 0 1 . VOLTEFAC

ENG DVD Function



15

SYSTEM SETUP

The system setup options are illustrated below:

TV SYSTEM

AUTO: Choose this setting if your player is connected to a multi-system TV.NTSC: Choose this setting if your player is connected to a NTSC TV.PAL: Choose this setting if your player is connected to a PAL TV.The default setting is AUTO.

Setting with incorrect TV system will result in black and white picture on your TV screen.Note:

SYSTEM SETUP

TV SYSTEM

VIDEO OUTTV TYPE

PASSWORD

RATING

DEFAULT

EXIT SETUP

NTSC

PALAUTO

VIDEO OUT

SYSTEM SETUP

CVBSRGB

TV SYSTEM

TV TYPE

PASSWORD

RATING

DEFAULT

EXIT SETUP

VIDEO OUT

The video signal can only be output to other device by the SCART port.You can choose the CVBS or RGB according to your connected device.The defunlt setting is RGB.

ENGDVD Function



16

4 : 3 PS (Pan & Scan): Choose this setting if your player is connected to a normal ratio TV. You canfill the movie to the entire screen of your TV. This might mean that parts of the picture (the left andright edges) won't be seen.

4 : 3 LB (Letter Box): Choose this setting if your player is connected to a normal ratio TV. You'll see themovie in their original aspect ratio (height-to-width ratio). You'll see the entire frame of the movie.The movie might appear with black bars at the top and bottom of the screen.

16 : 9 (Wide Screen): Choose this setting if your player is connected to a wide screen TV. If youchoose this setting and you don't have a wide screen TV, the images on the screen may appeardistorted due to vertical compression.

TV TYPE

PASSWORD

Step1:For first time use: Enter 0000 as password or assigned password to unlock.Step2: Once parental control is unlocked, go to rating menu and assign rating.Step3: Enter new password of your choose in 4 digit number to lock player rating.If you forget your assigned password, you can use 0000 to unlock the rating again.

SYSTEM SETUP

4:3PS

4:3LB16:9

TV SYSTEM

VIDEO OUT

PASSWORD

RATING

DEFAULT

EXIT SETUP

TV TYPE

SYSTEM SETUP

TV SYSTEM

SCREEN SAVERVIDEO

TV TYPE

RATINGDEFAULT

EXIT SETUP

PASSWORD ----

ENG DVD Function



17

RATING

The rating feature works with DVD discs that have been assigned a rating.This helps you to control the types of DVDs that the player can be watched.There are eight limited rating options: KID SAFE, G, PG, PG13, PG-R, R, NC-17,ADULT.The default setting is ADULT.

Note:If the password option is locked, you cannot change the rating.

Choose this option to resume factory settings.

DEFAULT

SYSTEM SETUP

TV SYSTEMSCREEN SAVERVIDEO

TV TYPE

PASSWORD

DEFAULT

EXIT SETUP

RATING

1 KID SAFE2 G3 PG

4 PG13

5 PG-R

6 R

7 NC-17

8 ADULT

SYSTEM SETUP

TV SYSTEM

SCREEN SAVERVIDEO

TV TYPE

PASSWORD

RATING

EXIT SETUP

DEFAULT RESTORE

ENGDVD Function



The language setup options are illustrated below:

OSD LANGUAGE

Highlight the OSD LANGUAGE option, and press the arrow buttons to choose the OSD language youprefer. Press ENTER to confirm, and it will display OSD in that language.There are 5 optional OSD languages: English, German, Spanish, French and Italian.

AUDIO LANG

Highlight the AUDIO LANG option, and press the arrow buttons to choose the audio language youprefer. Press ENTER to confirm. If the disc you are playing has that language available, it will outputaudio in that language. There are 7 optional audio languages: Chinese, English, Japanese, French,Spanish, Portuguese, Italian and German.

.

LANGUAGE SETUP

OSD LANGUAGE

AUDIO LANGSUBTITLE LANG

MENU LANG

EXIT SETUP

ENGLISHGERMANSPANISHFRENCHITALIAN

LANGUAGE SETUP

OSD LANGUAGE

SUBTITLE LANG

MENU LANG

EXIT SETUP

AUDIO LANGCHINESEENGLISHJAPANESE

FRENCH

SPANISH

PORTUGUESEITALIAN

GERMAN

LANGUAGE SETUP

18 ENG DVD Function



19

MENU LANG

Highlight the MENU LANG option, and press the arrow buttons to choose the menu language youprefer.Press ENTER to confirm. If the disc you are playing has that language available, it will display menuin that language. There are 8 optional menu languages: Chinese, English, Japanese, French,Spanish, Portuguese, German and Italian.If your preferred language isn't available, the disc's default language will be played.The default language of your DVD player is English.

SUBTITLE LANG

Highlight the option, and press the arrow buttons to choose the subtitle language youprefer. Press ENTER to confirm. If the disc you are playing has that language available, it will displaysubtitles in that language. There are 7 optional subtitle languages: Chinese, English, Japanese,French, Spanish, Portuguese and German.

SUBTITLE LANG

LANGUAGE SETUP

OSD LANGUAGEAUDIO LANG

MENU LANG

EXIT SETUP

SUBTITLE LANG

CHINESEENGLISHJAPANESE

FRENCH

SPANISH

PORTUGUESEGERMAN

OFF

LANGUAGE SETUP

OSD LANGUAGE

AUDIO LANGSUBTITLE LANG

EXIT SETUP

MENU LANG

CHINESE

ENGLISHJAPANESE

FRENCH

SPANISHPORTUGUESEGERMAN

ITALIAN

ENGDVD Function



20

VIDEO SETUP

The video setup options are illustrated below:

BRIGHTNESS

Use the and buttons to move the scroll and adjust the brightness.UP DOWN

CONTRAST

Use the and buttons to move the scroll and adjust the contrast.UP DOWN

VIDEO SETUP

BRIGHTNESS

CONTRASTHUE

SATURATION

EXIT SETUP

-------

- 12- 10- 8- 6- 4- 2- 0

VIDEO SETUP

BRIGHTNESS

HUE

SATURATION

EXIT SETUP

CONTRAST -------

- 12- 10- 8- 6- 4- 2- 0

ENG DVD Function



21

SARUTATION

VIDEO SETUP

BRIGHTNESS

CONTRASTHUE

EXIT SETUP

SATURATION

--------

- 12- 10- 8- 0- 6- 4- 2- 0

Use the and buttons to move the scroll and adjust the saturation.UP DOWN

HUE

VIDEO SETUP

BRIGHTNESS

CONTRAST

SATURATION

EXIT SETUP

HUE-------

- +6- +4- +2- 0- -2- -4- -6

Use the and buttons to move the scroll and adjust the hue.UP DOWN

ENGDVD Function



22

Highlight the AUDIO OUT option, and press the arrow buttons to choose the audio output mode youprefer. Press ENTER to confirm.There are 3 optional audio output modes: SPDIF /OFF, SPDIF /RAW and SPDIF /PCM.

Choose this setting to output analog signal, and there will be no signal is outputtedfrom optical jack.

Choose this setting if your DVD player is connected to a power amplifier with an opticalcable. When playing a disc recorded with Dolby Digital and MPEG audio formats, thecorresponding digital signals will be outputted from the optical output jack.

Choose this setting if your DVD player is connected to a 2-channel digital stereo amplifier. When playing a disc recorded with Dolby Digital and MPEG audio formats,audio signals will be modulated into a 2-channel PCM signal, and it will be outputtedfrom the optical jack.

The default setting is SPDIF/OFF.

SPDIF /OFF:

SPDIF /RAW:

SPDIF /PCM:

OP AUDIO OUT

OPTICAL SETUP

OP AUDIO OUT

EXIT SETUP

SPDIF / OFF

SPDIF / RAWSPDIF / PCM

OPTICAL SETUP

ENG DVD Function



23

DIGITAL SETUP

DIGITAL SETUP

DYNAMIC RANGEDivX ( R ) VOD

EXIT SETUP

DYNAMIC RANGE

DivX ( R ) VOD

EXIT SETUP

-----

- FULL- 6/8- 4/8- 2/8- OFF

The digita l setup options are illustrated below:

Choose this setting to adjust the line out compressing ratio and get different effects.If adjusting to FULL, the audio signal peak value will be compressed to be the minimum; whileadjusting to OFF, to be the maximum.

DivX ( R ) VODDivX VOD files are downloaded after paying a rental from certain commercial website. Prior todownloading a VOD you need to input the registration number of your DVD player on the purchaseform on the site. Write down the VOD 8-character registration number so that you can fill in the formon the website you purchase your DivX VOD files from.

If you cannot play a DivX VOD file recorded on a CD-R disc after downloading it, the rental periodallocated during purchasing from the website may have expired. It is also possible that therecorded file is not compatible with your player because of different versions or incorrect downloadparameters. The parameters used when copying to CD-R may be another reason for this.Since it is not possible here to supply all the information, parameters and advice relating to the useof DivX VOD files, we recommend that you visit specialist website such as www.divx.com/vod.

Note:

The registration code will be changed each time you use it to download the DivX files. You have touse new code to carry out downloading operation next time.

-DI VX[R] VIDEO ON DEMAND-

YOUR REGISTRATION CODE IS: XXXXXXXXTO LEARN MORE VISIT WWW.DIVX.COM/VOD

[DONE]

DYNAMIC RANGE

DIGITAL SETUP

ENGDVD Function


http://www.divx.com/vod

http://www.DIVX.COM/VOD


24

Connect the FM antenna to the FM jack on the back side of unit, and hang it up to some whereto get better signals.

Press the mode button to choose the FM radio mode and press to enter.If there is no channel, press the

OKbutton on the remote control to scan, the

scanning frequency is between 87.5MHZ and 108MHZ. The found FM radio programs will bestored automatically. It can store 99 programs.Use the button on the remote control or / button on the top touch panel or inputthe number by the number keys directly to choose the program you want.

FM SCAN

UP / DOWN

1

4

23

Note:the "10+" button will increase the number by 10 each time when you press it. For example, If youwant to choose the 35th program, you can press the "10+" button for 3 times continuously, thenumber shown on the screen will become "30+" then press "5" button, you go to the 35thprogram.

FM OPERATION

The followings are the instruction for the FM operation.

FM RADIO

CH

NO CHANNEL

00

FM RADIO

CH

87.5 MHZ

01

FM jack

ENG FM Function



25

iPod OPERATION

iPod playback

Choose the dock adapter that fit your iPod . There are 2 dock adapters we offered for yourchoice. One is for the 1GB, 2GB and 4GB iPod nano, the another is for 30GB iPod with video.Insert the dock adapter and connect your iPod.

The playing mode menu will pop out on the screen and the cursor stops on the ipod icon, pressbutton to enter.OK

1

2

3

Dock adapterYou can remove the dock adapterwith your fingernai l by using thi s slot.

Conne ctor well

+

++

_

___

Press

、

MENU UP /DOWNOK

MENUMENU

iPod ON/OFF

/

MUTE

MY MUSIC MY VIDEO MY PHOTO.

button on the remote control to pop out the main menu of the iPod. Use thebutton to choose the items your want and press to confirm.

If you want to go back to the previous menu you are operating, press the button. It will goback one by one when each time you press the button.Press to turn on or turn off your iPod.

Press the volume / buttons to adjust the system volume.Press and hold for faster adjustment.Note: the volume / buttons on the panel have the same function.

Press buttons to jump to the previous or next track.Press the button once to pause play; again to resume it.Press the button to mute the audio.

The three buttons are the shortcut keys for the playback ofPress them, the system will switch

to the iPod file directly from the ongoing operation.

MY VIDEO button is only useful for the iPod with video.Your iPod navigation controls are fully function while it is docked inthe system.Top keypad of the unit can work as well as the same buttons on theremote control.

Note:

Note:

、

The following are the instructions for the iPod operation

ENGiPod Function

Note:The iPod will be recharged automatically once its insertion.

M ODE

SETUP

R ETUR N VOL

OK

M ENU

+_

M ODE

SETUP

R ETUR N VOL

ONMY

VIDEOMY

PHOTOMY

MUSIC

OK

M ENU

+_

MYV IDEO

M YPHO TO

M YM USIC



26

Plug the USB into the USB jack.Press the "MODE" button to pop out the mode menu and choose the USB mode then pressbutton to confirm. The playing mode menu will pop out on the screen and the cursor stops onthe USB icon press OK button to enter.The system enters the USB and is ready to playback the files in the USB.The following operations are just like the playback of a MP3 format disc and JPEG CD.(see page14)

OK

Support SD/ MS /MS-PRO /MMC cards.This product has been test with most brand name flash media cards.Using poor quality flash may affect the readability of the unit.This unit can read flash memory card up to 1GB capacity.

The following are the instructions of the USB operation

USB AND CARD-READER OPERATION

Install the card-reader and the operations are same with the USB operations (see the details above.)

1

4

4

2

2

3

3

Supply USB 1.1 use.The player may not work properly if using USB connecting cable. Suggest not use it.

Card-reader operation

AUX 1 1 USB

CARDAUX 1

Bluetooth register button

ENG iPod Function



27

Install the bluetooth module into the unit.The playing mode menu will pop out on the screen and the cursor stops on the bluetooth icon,press button to enter.OKIf it is the first time to use this function, press and hold the bluetooth register button for 3 seconds,the LED will flash the blue light in the way that 0.5 second on and 1 second off.

After that your device will sent the signal to the unit and show the message for inputting the pairingcode. The pairing code is 8888.If the register is successful you will hear "DO DO" sound. The system begins to receive the audiosignal sent by your device, and the LED began to flash in the way that 0.5 second on and 1second off.If all the bluetooth devices are ready, you can press the bluetooth button on the remote controlto enter the bluetooth function from the other playing media.

1

4

2

5

6

3

BLUETOOTH

BLUETOOTH OPERATION

The following are the instructions for the bluetooth operation

Bluetooth register button2

1 Bluetooth module

ENGBluetooth Function

Note:After power off, the previous connected and registered device will be kept in the bluetoothmodule. Then the second time when you use your device for the bluetooth function in this unitthe system will enter the stand-by mode directly and be connected with your deviceautomatically. Tn this case the LED will flash in the way that 0.5 second on and 3 second off. Thedistance of receiving bluetooth signals is about 10 metres in the open field.



28

AUDIO IN FUNCTION

Connect this unit with other device by the AV cable. The audio signals of the device will be inputto it and you can enjoy the surround channel sound.Press the MODE button to choose the AU1or AU2 mode.

1

2

Note:AU1mode is for the audio signals input from the 3.5 jack.AU2 mode is for the audio signals input from the port.

φ Audio InAudio In

Suppor t AU1 Mode

Support AU2 Mode

Yellow

Yellow WhiteRed

ENG Audio In Function

( 3.5 stereo audio cable)φ



29

AUDIO OUT FUNCTION

This unit can output the audio signals to other device from the SCART / AUDIO OUT/ OPTICAL port.

Output the signal from the SCART port /AV OUT portNote:

Note:

Connect this unit with other device by the SCART / AV cable(see the 1& 2 in the picture above),the audio signal will be output directly to the other device.

Press the setup button on the remote control and go to the OP AUDIO OUT item to choose theaudio output mode according to your device.(see the detail on page22)

Output the signal from the OPTICAL port

1

2

2 AV OUT Port3 OPTICAL Port1 SCRAT Port

Yellow

Yellow Red White

ENGAudio Out Function



30

This unit can output the video signals to other device from the SCART / VIDEO OUT port. Press thesetup button on the remote carol and go to the VIDEO OUT item to choose the video output modeaccording to your device (see the detail on page15)

VIDEO OUT FUNCTION

Note:The SCART port supports the CVBS and RGB two kinds of video signal output.The SCART port doesn

,t support the VIDEO IN function.

ENG Video Out Function



31

OTHERS

Trouble shooting

iPod

DVD

Symptoms

The disc doesnot play

Disc is loaded incorrectly.

AV cable is disconnected.

AV cable is disconnected.

Wrong setting or connection forthe player or TV.

Wrong setting or connection forthe player or TV.

The antenna is not connected well. Connect the antenna well.

Wrong mode setting. Set the right mode.

Make sure the dock insert is the proper fit for your iPod.Remove your iPod from the and check for obstructions on theconnectors in the dock and on your iPod. Then reseat it in thedock.

Setting or connectingcorrectly with your player or TV.

Setting or connectingcorrectly with your player or TV.

Connect the cable firmly.

Connect the cable firmly.

Load the disc with the label sideup, and firmly pressed into thecenter.

Disc is dirty or scratched.

Wrong region disc. Use the right region disc.

Make sure the disc is freefrom scratches or fingerprints.

No display

No sound

No sound

No sound andyour iPod is not

charging

No sound afterquickly undocking

or docking youriPod

Possible causes Remedies

Your iPoddoes not dock

properly

Make sure the system is plugged in, your iPod is turned on, anda music track is selected and playing.Press the Play/ Pause button on the remote control.Increase the volume Moltimedio Centers setting for the system.Remove your iPod from the dock, wait briefly, then reseat it. You mayneed to do this a few times.Make sure your iPod is running compatible software.

Make sure the power cable is securely plugged in to a functioningwall outet and with the symbol on the small connector matched tothe one on the back of the ANY1000 system.Make sure your iPod is firmly seated in the dock.

Remove your iPod from the dock, wait for 5 seconds, and return it tothe dock.Unplug the power cable for 1 minute, then plug it back in. This resetsthe system.

Maintenance and clean the unit only as recommended in the operational instructions.

Damage requir ing serviceHave the unit serviced by a qualified service technician if:the unit has been exposed to rain or water.The unit does not seem to operate normally.The unit exhibits a marked change in performance.

DO NOT ATTEMPT TO SERVICE THE UNIT BY YOURSELF!

ENGGeneral Instruction



www.nextbase.comANY1000-ENG-MANUAL-A1


http://www.nextbase.com


audiomonster manual

Entertainment & Humor

itle se arch

normal ratio tv

mpeg audio formats

ac input jack

mp3 format disc

wide screen tv

divx vod files

audio output mode