automatic machines for ladder and stepladder production · dinâmica –engenharia, lda - rua da...
TRANSCRIPT
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
We provide solutions for:
Bending / Driling / Punching / Riveting / Assembly
Aluminium Stepladder Extension Ladder Ladder Folding ladder
Small Stepladder
Major Benefits
- Reduction of cycle time
- Improved productivity
- Better product quality
- Optimization of production flow
- Resource Efficiency
All machines can be customized for your needs
Advanced machines and toolsfor the production of ladders and stepladders
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Ladder machines
LPM
FCT
AMT
LPM-S
EMAMCP
Features:
- Stiles traction system
- Stiles punching
- Rung insertion
- Rung expansion
- Rung orbital riveting
- Crimping pads
Characteristics:
- Cycle time: Approximately 20 seconds / meter
- Section (mm): 60x20x1.2 up to 90x30x1.5
- Profile length (mm): 1000 up to 6000
- Profile section: to be defined by the client
LPM - Automatic machine for
producing a ladder
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Features:
- Integrated solution for ladder production
- Conveyor for ladder pre-assembly
- Rung expanding
- Rung orbital riveting
- Automatic ladder advance
- Conveyor for ladder exit
Characteristics:
- Working cycle time 7 seconds per rung
- Profile section: to be defined by the client
- Profile length (mm): 1000 up to 6000
LPM-S – Semi-Automatic machine for
producing a ladder
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Features:
- Fully automatic solution
- 18 slots for pre-saved configuration production
- Punching through inner mandrel
- Easy matrix replacement for different hole formats
- Prepared to produce two profiles at the same time
- Displacement of the profiles controlled by a servomotor
- Possibility to adjust the pitch between holes
- Protection of danger zones.
Characteristics:
- Working cycle time 4 to 5 seconds per hole
- Profile section: to be defined by the client
- Profile length (mm): 1000 up to 6000
MCP – Automatic machine for ladder
profile punching
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
EMA - Semi-Automatic expansion machine
for aluminium profile
Features:
- Double expansion head
- Expansion head with automatic lubrication
- Processing of parallel ladders
- Small setup time
Characteristics:
- Cycle time: 4 seconds for rung
- Profile section: : □ / ○ / D
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Features:
- Definition of the profile to be cut
- Pneumatic pressers unit
- In and out conveyor
- Guidance unit
- Safety Protections
- Cutting unit
Characteristics:
- Cycle time: 5 seconds
- Actuated with foot switch
- Prepared for 4x3 and 4x4 multipurpose ladders.
LCM – Aluminium profile cutting machine
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Features:
- Simultaneous mounting of tree hinges
- Faster production cycle
- Product length adjustment
Characteristics:
- Cycle time: 5 seconds
- Production of 1100 parts in 8 hours shift
- Operated by a manual valve
- Dimensions (mm): 1800x700x900
AMT – Semi automatic machine for
hinges assembly
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
FCT - Portable tool for crimping pads
Features:
- Lightweight
- Ergonomic
- Faster production cycle
- Adaptable to various pad types and materials
Characteristics:
- Cycle time: 3 seconds
- Application of 8000 operations in 8 hours shift
- Operated by pneumatic manual valve
- Profile section: to be defined by the client
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Stepladder machines
RCT
SRM
MFAMDR
RMA
MPE
MPE-S
BME
MFA - Automatic machine for
producing a stepladder front profile
Features:
- Profile automatic centering
- Drilling
- Slot opening
- Punching
- Bending
Characteristics:
- Cycle time: 14 seconds
- Production of 1400 parts in 8 hours shift
- Profile lenght (mm): 2300 up to 5500
- Profile section: to be defined by the client
- Bending width adjustable
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Features:
- Simultaneous production of two profiles
- Drilling
- Bending
- Deforming
- Punching
Characteristics:
- Cycle time: 15 seconds (2 parts, left and right)
- Production of 2300 parts in 8 hours shift
- Automatic clamping of aluminum profiles
- Profile section : to be defined by the client
- Maximum profile length (mm): 2000
MPE – Semi-automatic machine for
producing a stepladder rear profile
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Features:
- Manual feeding
- Drilling
- Bending
- Deforming
- Manual extraction
Characteristics:
- Cycle time: 15 seconds (1 part)
- Profile section: to be defined by the client
- Maximum profile length (mm): 2000
MPE-S – Semi-automatic machine for
producing a stepladder rear profile
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
SRM – Semi automatic machine for
steps production
Features:
- Automatic stopper
- Cut for 2 rungs simultaneously
- Holes Punching
- Disc saw cutting
- Adjustable for different length
Characteristics:
- Cycle time: 5 sec per rung
- Production of 7000 parts in 8 hours shift
- Profile section: to be defined by the client
- Maximum profile length (mm): 6000
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
MDR – Automatic machine for tube
diameter reduction
Features:
- Automatic feeding
- Automatic extraction
- Diameter size reduction both extremities
- Adjustable for different lengths
Characteristics:
- Cycle time: : 5 sec/Part
- Production of 7000 parts in 8 hours shift
- Profile section: Round
- Maximum profile length (mm): 700
RMA - Semi-Automatic riveting machine
for aluminium profile
Features:
- Double riveting of profile
- Riveting head for different shapes of rung
- Automatic adjustment to next dimension
- Ladder and stepladder with adjustment
Characteristics:
- Cycle time: 5 second for rung
- Production of 1050 parts in 8 hours shift
- Type of rungs: □ / ○ / D
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Features:
- Up to 6 simultaneous riveting
- Various types of rivet
- Product width adjustment
- Flexibility
- Automatic clamping of front profile
Characteristics:
- Cycle time: 5 seconds for clamp
- Production of 5000 parts in 8 hours shift
- Operated by a manual valve
- Profile section: to be defined by the client
RCT - Semi-Automatic machine for
riveting clamps
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Features:
- Ergonomic assembly workbench
- Pneumatically operated arm to open and close the front profile
- Stepladders up to 8 steps
- Adjust the height between steps
Characteristics:
- Customizable to client step ladder model
- Working pressure: 6 bar
- Dimensions: 2700 x 1300 x 2200 mm
BME – Stepladder assembly workbench
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Hydraulic Press machines
PHFPH30
PH30 - Hydraulic press for tools
Features:
- Electric board with command buttons.
- Operation through bi-manual command.
- Table press with system for easy attachment tool.
- Press base table with tool clamping system
- Closed press with frontal area protected by ligth curtain
- With a 2 working speed the hydraulic cylinder approaches in
fast mode at low pressure and at low speed and high pressure
when executing the operation.
Characteristics:
- Area: Up to 650x500 mm
- Force: 10 000 Kg / 20 000 kg / 30 000 Kg
- Power: Up to 7.5 KW
- Voltage: 400V / 50Hz or 220 V / 60 Hz
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
PHF - Hydraulic press for tools
Features:
- 2 hydraulic presses operated by common hydraulic unit
- Actuated with foot switch (hands free to part manipulation)
- Tool developed for the part to be processed
Characteristics:
- Cycle time: 3 sec/stroke
- Profile section: Customizable
- Dimensions: 1200 x 600 x 1500 (mm)
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Test Equipment
LTEDTE
DTE – Durability test equipment
Features:
- Pneumatically actuated and electronically controlled
- Programmable for different cycles of operation
- Human machine interface (HMI) integrated
- Accordingly to required testing from EN131
Characteristics:
- Adaptable to various types of standing ladders
- Pneumatic pressure: 6 bar
- Dimensions: 1500 x 1700 x 2800 (mm)
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
EN131
NBR13430
LTE – Load test equipment
Features:
- Hydraulically actuated and electronically controlled
- Programmable for different cycles of operation
- Human machine interface (HMI) integrated
- Load cell with capacity up to 300 kg
- Linear encoder to deflection measure up to 700mm
Characteristics:
- Hydraulic pressure: 160 bar
- Power: 0.55 kW
- Voltage: 400 V, 3 Phase, 50Hz / 60Hz
- Dimensions: 2500 x 750 x 800 (mm)
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Special machines
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Tools
Scaffolding pilar Auto riveting / screwing
Assembly cell
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
About us
Dinâmica - Engenharia is a leader supplier of special
machines and tools for the metalworking and automotive
industry.
We specialize in the project development, prototypes and
special machinery for industrial process optimization.
Dinâmica Engenharia, Lda
Rua da Madeira 270/B
3700 - 176 São João da Madeira
Tel: +351 256 001 915
Email: [email protected]
Web: www.dinamica-virtual.pt