base station specification - sensoro · pdf fileα base station by sensoro, featuring...
TRANSCRIPT
α Base Station Specification
Copyright © 2016 SENSORO All rights reserved.
1. Product Overview
01
α Base Station by SENSORO, featuring excellent outdoor signal
coverage and strong hardware protection, is designed and built for
outdoor IoT application scenarios that require low power-
consumption, long range and low throughput, hence capable of
handling the data communication of a large-scale sensing
network. As the core infrastructure of the SENSORO LPWAN, its
powerful data processing capability is designed to support and
connect thousands of nodes into the IoT-WAN and provide a data
path from the nodes all the way to the cloud.
This IoT base station supports multiple communication modes to
servers (3G, Ethernet etc.) for flexibility to adapt to various scenes;
multi-network hot backup is also available to improve reliability and
stability in data communication.
02
• Terminal Device TD through IoT-WAN to upload
data to the IoT Base Station • Terminal Device upload data to multiple base stations
in the same network• IoT Base Station transfer the data from TD to cloud
through a variety of network mode e.g. Ethernet/
3G
• Cloud could monitor the status of the TD, sensing
data and even manage the terminal equipment for
different application• Cloud dynamically optimize the network(IoT-WAN),
and improve the stability and reliability of network
communication
2. Product Features
03
Enterprise IoT-WAN
Ultra long-range wireless signal coverage
Long-range wireless data feed with low power nodes
Multi-channel parallel data processing capability to support thousands of nodes
Dynamic network optimization designed for stability and high performance in communication
Data rate 200bps 5Kbps
Industrial Grade Protection
High grade full metal material, overall thermal design, -40℃ +65℃ wide-range operating temperature
Industrial grade IP67 protection(e.g. water/dust-resistant)
Built-in lightning protection
Design for high reliability
Multi network hot backup options to ensure stability in data communication
Backup power supply available for emergency cases
Multi built-in sensors for remote monitoring of base station operation
Exception monitoring & self- recovery function
Remote system upgrade
Security Tri-layer encryption to ensure data security
3. Hardware Specification
04
Physical Information
Dimensions L x W x H 120mm x 120mm x 260mm
Weight 2.5Kg
Interface
WAN port: 10/100M Base Ethernet, autosensing (RJ45)
Management console port (RJ45) with Reset button
Antenna N-Type Female Connector x 4
Multicolor LED System status indicator
PowerPower input Power over Ethernet (PoE) (802.3af)
Power Consumption 13W
Sensor
Temperature Sensor × 2
Gyroscope × 1
Ambient Light Sensor × 1
EnvironmentOperating Temperature -40℃ +65℃ for Base Station ( Outdoor )
0℃ +40℃ for PoE Adapter ( Indoor )
Storage Temperature-40℃ +80℃ for Base Station -20℃ +80℃ for PoE Adapter
05
Operating Humidity 5% 90% (non-condensing)
Storage Humidity 5% 90% (non-condensing)
IP Grade IP67
Wind resistance 165MPH
Operating altitude -60 3000m
Atmospheric pressure 53kPa 106kPa
Radio specifications
IoT-WAN x 2
Antenna type External antenna
Maximum transmit power 24dBm
Receiver sensitivity
-141dBm @ 200bps,433MHz-135dBm @ 900bps,433MHz-126dBm @ 5000bps,433MHz-140dBm @ 200bps,868MHz-135dBm @ 900bps,868MHz-125dBm @ 5000bps, 868MHz-140dBm @ 200bps,915MHz-135dBm @ 900bps,915MHz-125dBm @ 5000bps, 915MHz
06
Cellular and Wireless
Antenna type External antenna
Maximum transmit power 24dBm
Receiver sensitivity -110dBm @ UMTS 800/850 Band V; -110dBm @ UMTS 900 Band VIII-109dBm @ UMTS 1900 Band II; -110dBm @ UMTS 2100 Band I
BLE
Antenna type Internal antenna
Maximum transmit power 4dBm
Receiver sensitivity-96.0dBm @ 250Kbps-93.0dBm @ 1Mbps BLE-90.0dBm @ 1Mbps
GNSS
Antenna type External antenna
Receiver sensitivity -165dBm@Tracking-148dBm@Acquisition
Antenna specifications
IoT-WAN x 2
Fewquency band(MHz) 433MHz / 868MHz / 915MHz
07
VSWR < 2.5
Gain 5dBi
Polarization Linear
Cellular and Wireless
Frequency band(MHz) GSM/GPRS/EDGE ( 850,900,1800,1900MHz)UMTS/HSPA ( B1,B2,B5,B8 )
VSWR < 1.8
Gain 5dBi
Polarization Linear
BLE
Frequency band(MHz) 2.4GHz
VSWR < 2.5
Gain 0.9dBi
Polarization Linear
08
GNSS
Fewquency band(MHz) BD B1/GPS L1/GALILEO/QZSS
VSWR < 2
Gain 5dBi
Polarization Linear
Network features
Ethernet Compliance with IEE802.3uSupport DHCP Client, obtain IP address automatically
Cellular and WirelessGSM/GPRS/EDGE ( 850,900,1800,1900MHz)UMTS/HSPA ( B1,B2,B5,B8 )
4. Compliance & Standards
09
Safety
UL 60950–1UL 60950–22CAN/CSA 22.2 No.60950-1CAN/CSA 22.2 No.60950-22 IEC 60950–1IEC 60950–22 EN 60950–1 EN 60950–22GB/T 4943.1
Radio approvals
ETSI EN 300 328FCC Part 15C: 15.247 RSS-210AS/NZS 4268FCC Part 15.107 and 15.109
10
EMC
ETSI EN 301 489–1 FCC Part 15 ICES-003 YD/T 1312.2-2004ITU k.21GB/T 9254AS/NZS CIPSR22 EN 55022 EN 55024 CISPR 22 CISPR 24 IEC61000-4-6 IEC61000-4-2
IEEEIEEE802.3IEEE802.3 af
11
Environmental
ETSI 300 019-2-1 ETSI 300 019-2-2 ETSI 300 019-2-4 IEC 60068-2-52 ETSI 300 019-1-1 ETSI 300 019-1-2 ETSI 300 019-1-4
EMF
CENELEC EN 62311 CENELEC EN 50385 FCC Bulletin OET65RSS-102 FCC Part1&2 FCC KDBseries
RoHS Directive 2002/95/EC & 2011/65/EU
Copyright © 2016 SENSORO All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of SENSORO.
General DisclaimerThe information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, future product portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to differ materially from those expressed or implied in the predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an offer nor an acceptance. SENSORO may change the information at any time without notice.