BIBLIOGRAFIE

1. Ionescu, C., Vlădeanu, V., Larionescu, S., Ionescu, D. Automatizări. EdituraDidactică şi Pedagogică, Bucureşti, 1982.

2. Saal, C., Ţopa, I., Fransua, Al., Micu, E. Acţionări electrice şi automatizări.Editura Didactică şi Pedagogică, Bucureşti, 1980.

3. Popovici, D. Servomecanisme. Litografia Univ. Tehnice Timişoara, 1992.4. Kuo, B.C., Kelemen, A., Crivii, M., Trifa, V. Sisteme de comandă şi reglare

incrementală a poziţiei. Editura Tehnică, Bucureşti, 1981.5. Leonhard, W. Control of electrical drives. Heidelberg, Springer Verlay, 1985.6. Preitl, Şt., Teoria sistemelor şi reglaj automat. vol.1, Lito. UTT, Timişoara, 1992.7. Dragomir, T.L. Regulatoare automate. Vol.1, Lito. IPTVT, Timişoara, 1987.8. Saito, K., Kamiyama, K., Ohmae, T., Matsuda, T. A microprocessor–controlled

speed regulator with instantaneous speed estimation for motor drives. vol.35,no.1, pp.95-99, Feb.1988.

9. Brown, R.H., Schneider, S.C., Mulligan, M.G. Analysis of algorithms forvelocity estimation from discrete position versus time date. IEEE Trans.Industrial Electronics, vol. 39, no.1, pp.11-19, Feb.1992.

10. Schmidt, P.B., Lorenz, R.D. Design principles and implementation ofacceleration feedback to improve performance of DC drives. IEEE Trans.Industry Applications, vol. 28, no.3, pp.594-599, May/June 1992.

11. Wallace, I.T., Novotny, D.W, Lorentz, R.D., Divan, D.M. Verification ofenhaced dynamic torque per ampere capability in saturated induction machines.IEEE Trans. Ind. Applications, vol. 30, no.5, pp.1193-1201, Sept./Oct., 1994.

12. Andreescu, G.D. Estimatoare în sisteme de conducere a acţionărilor electrice.Editura „Orizonturi Universitare”, Timişoara, 1999.

13. Vanlandingham, H.F. Introduction to Digital Control Systems. MacmillanPublishing Comp., New York, 1985.

14. Mihoc, D., Ceapăru, M., Iliescu, Şt., Borangiu, I. Teoria şi elementele sistemelorde reglare automată. Editura Didactică şi Pedagogică, Bucureşti, 1980.

15. Ionescu, C., Vlădeanu, V., Larionescu, S., Ionescu, D. Automatizări. EdituraDidactică şi Pedagogică, Bucureşti, 1982.

16. Utkin, V.I. Variable Structure Systems with Sliding Modes. IEEE Transactionson Automatic Control, vol. 22, no. 2, pp. 212-222, April, 1977.

17. Walcott, B.L., Zak, S.H. Observation and Control of Nonlinear DynamicalSystems: A Variable Structure Approach. Raport de cercetare TR-EE 86-41,Purdue University, West Lafayette, IN, 1996.

Bibliografie 527

18. Preitl, Şt., Precup, R.E. Sisteme de reglare avansată. Vol.1.Lit.Univ.„Politehnica” din Timişoara, Timişoara, 1995.

19. Utkin, V.I. Sliding Modes and Their Applications in Variable Structure Systems.Mir, Moscow, 1978.

20. Itkis, U. Control Systems of Variable Structure. Wiley, New York, 1976.21. Hung, J.Y., Gao, W., Hung, J.C. Variable Structure Control: A Survey. IEEE

Transactions on Industrial Electronics, vol. 40, no. 1, pp. 2-22, February, 1993.22. Buehler, H. Reglage par mode de glissement. Presses Polytechniques Romandes,

Lausanne, 1986.23. Milosowlieivić, Č., Antić, D., Djordjevic, G. DC Motor Speed Regulation Using

PI Type Variable Structure Regulator with Identity Observer. ConferinţaInternaţională Automation ‘92, vol. 1, pp. 214-223, Budapesta, 1992.

24. Dumitrache, I. Tehnica reglării automate. Editura Didactică şi Pedagogică,Bucureşti, 1980.

25. Preitl, Şt., Precup, R., Porumb, A. Elemente de reglare automată. Curs, vol.1, Lit.U.T.T., Timişoara, 1995.

26. Seracin, E., Popovici, D. Tehnica acţionărilor electrice. Editura Tehnică,Bucureşti, 1985.

27. Dragomir, T.L., Preitl, Şt. Teoria sistemelor şi reglării automate. LitografiaI.P.T., Timişoara, 1978.

28. Blakeslea, T. Proiectarea cu circuite logice MSI şi LSI standard. Editura Tehnică,Bucureşti, 1988.

29. Ionescu, V. Teoria sistemelor. Sisteme liniare. Editura Didactică şi Pedagogică,Bucureşti, 1985.

30. Schönfeld, R., Habiger, E. Automatisierte Elektroantriebe. VEB Verlag Technik,Berlin, 1981.

31. Voicu, M. Tehnici de analiză a stabilităţii sistemelor automate. Editura Tehnică,Bucureşti, 1986.

32. Fransua, Al., Măgureanu, R. Electrical machines and drive systems. EdituraTehnică, Bucureşti, 1984.

33. Măgureanu, R. Maşini electrice speciale pentru sisteme automate. EdituraTehnică, Bucureşti, 1980.

34. Cheamond, C.J. Control System Technology. Edward Arnold, London, 1986.35. Atanasiu, Gh. Maşini electrice speciale. Lit. UTT, Timişoara, 1992.36. Ifrim, A., Noţingher, P. Materiale electrotehnice. Editura Didactică şi

Pedagogică, R.A., Bucureşti, 1992.37. Chioreanu, V. Materiale electrotehnice. Lit. I.P.T.V.T., Timişoara, 1983.38. Gheorghiu, I.S., Fransua, A. Tratat de maşini electrice. Vol. I. Maşini de curent

continuu. Editura Academiei R.S.R., Bucureşti, 1968.

Bibliografie528

39. Richter, R. Maşini electrice. Vol. I. Elemente generale de calcul. Maşini de c.c.Editura Tehnică, Bucureşti, 1958.

40. Dordea, T., Biriescu, M. Proiectarea maşinilor electrice. Volumul 1-1, Lit.I.P.T.V.T., Timişoara, 1990.

41. Liwschitz, M. Die elektrischen Maschinen. Leipzig und Berlin, VerlayTeubner.III. Berechnung und Bemessung, 1934.

42. Dorf, R.C. Electrical Engineering Handbook. IEEE Press, 1993.43. Takada, Y., Abe, M., Masuda, S., Inagaki, J. Commercial scale production of Fe-

6,5 wt. % Si sheet and its magnetic properties. 4th Joint 3M- Inter- magConference AC-08, 1988, pp.5367-5369.

44. Takada, Y., Abe, M., Fujita, F. Development of Fe- 6,5 wt. % Si sheet incommercial production. Materials Research Society, vol.11, 1989, pp.199-207.

45. Motoyasu Mochizuki, Sadayoshi Hibino, Fuminori Ishibashi. Application of 6,5% Silicon Steel Sheet to Induction Motor and Its Magnetic Properties.International Conference on Electrical Machines. Cambridge, Massachusetts,U.S.A., 13-15 August, 1990.

46. *** - Internet, NK Super Core Series [Comparison].47. Măgureanu, R., Vasile, N. Servomotoare fără perii tip sincron. Editura Tehnică,

Bucureşti, 1990.48. *** - Internet, Master Magnetics Inc.49. *** - Internet, Dexter Magnetic Technologies Inc. 50. Bartzer, Şt., Muşuroi, S. Tehnologia de fabricaţie a produselor electrotehnice.

Îndrumător de lucrări, Lit. U.P.T., Timişoara, 1997.51. Fransua, A., Măgureanu, R. Tendinţe actuale în domeniul construcţiei şi

comenzii maşinilor şi acţionărilor electrice. Ciclul Maşini şi Acţionări electrice.Tendinţe actuale, vol. I, Editura Tehnică, Bucureşti, 1988.

52. Kelemen, A., Imecs, M. Sisteme de reglare cu orientare după câmp ale maşinilorde curent alternativ. Editura Academiei R.S.R., Bucureşti, 1989.

53. Câmpeanu, A. Introducere în dinamica maşinilor electrice de curent alternativ.Editura Academiei Române, Bucureşti, 1998.

54. Gheorghiu, I.S., Fransua, Al. Tratat de maşini electrice. Vol.III. Maşiniasincrone. Editura Academiei R.S.R., Bucureşti, 1971.

55. Atanasiu, Gh. Transformări de variabile în teoria maşinilor electrice. CursConferinţa Naţională a Electrotehnicienilor şi Energeticienilor, 1982.

56. Atanasiu, Gh. Maşini electrice. Elemente de execuţie I (Teorie, performanţe).Vol. I, Litogafia UTT, Timişoara, 1994.

57. Blaschke, F. Das Prinzip der Feldorientierung, die Grundlage für dieTransvektor-Regelung von Drehfeldmaschinen, Siemens-Zeitschrift, 45, Heft 10,1971.

Bibliografie 529

58. Fransua, A., Măgureanu, R. Electrical machines and drive systems, TechnicalPress, Oxford, 1984.

59. Kelemen, A. Acţionări electrice. Editura Didactică şi Pedagogică, Bucureşti,1979.

60. Kovacs, K.P. Analiza regimurilor tranzitorii ale maşinilor electrice. Traducere şicompletare de Kelemen A. şi Imecs M. Editura Tehnică, Bucureşti, 1980.

61. Leonhard, W. Control of AC - machines with help of microelectronics. 3rd IFACSymposium on Control in Power Electronics and Electrical Drives, Surveypapers, Lausanne, 1983.

62. Bălă, C. Maşini electrice. Editura Didactică şi Pedagogică, Bucureşti, 1982.63. Boldea, I., Atanasiu, Gh. Analiza unitară a maşinilor electrice. Editura

Academiei, Bucureşti, 1983.64. Dordea, T. Maşini electrice. Editura Didactică şi Pedagogică, Bucureşti, 1977.65. Câmpeanu, A. Maşini electrice. Editura Scrisul Românesc, Craiova, 1988.66. Boldea, I. Transformatoare şi maşini electrice. Editura Politehnica, Timişoara,

2001.67. Park, R.H. Two reaction theory of synchronous machines. Part I: Generalized

method of analysis. AIEE Transaction, vol. 48, 1929, pp. 716-727.68. Kovács, K.P., Rácz, I. Transiente Vorgänge in Wechselstrommaschinen. Verlag

der Ungarischen Akademie der Wissenschaften, Budapest, 1959.69. Rácz, I. Aszinkron motorok elektromágneses tranziens jelens égeinek szamitási

módszere Electrotechnika, 45, Budapest, 1972.70. Stepina, J. Raumzeiger als Grundlage der Theorie der elektrischen Maschinen.

ETZ-A, 88, 23, 1967.71. Bayer, K.H., Waldmann, H., Weibelzahl, H. Die Transvektor-Regelung für den

feldorientierten Betrieb einer Synchronmaschine. Siemens-Zeitschrift, 45, Heft10, 1971.

72. Flöter, W., Ripperger, H. Die. Transvektor-Regelung für den feld-orientiertenBetrieb einer Asynchronmaschine. Siemens-Zeitschrift, 45, Heft 10, 1971.

73. Langweiler, F., Richter, M. Flusserfassung in Asynchronmaschinen. Siemens-Zeitschrift, 45, Heft 10, 1971.

74. Clarke, E. Circuit analysis of A.C. power systems. John Wiley, New York, 1943.75. Lyon, W.V. Transient analysis of alternating–current machinery. John Wiley,

New York, 1954.76. Kron, G. Tensors for circuits. Dover Publications, New York, 1959.77. Ku, Y.H. Transient analysis of rotating machines and stationary networks by

means of rotating reference frames. Vol. 70/1951.78. Yamamura, S. AC motors for high performance applications. Marcel Dekker,

New York, 1986.

Bibliografie530

79. Biriescu, M. Maşini electrice rotative. Parametri, caracteristici, încercări. Editurade Vest, Timişoara, 1997.

80. Muşuroi, S., Bogoevici, M. Determinarea pierderilor din fierul rotoric almaşinilor trifazate cu rotorul în colivie în situaţia alimentării acestora princonvertoare statice de frecvenţă. Lucrările ştiinţifice ale simpozionuluiinternaţional Universitatea ROPET 2000, 19 – 20 oct. 2000, Petroşani, pp. 41-44,Petroşani, 2000.

81. Muşuroi, S., Bogoevici, Gh. Determinarea parametrilor echivalenţi ai circuituluimagnetic al maşinilor de inducţie trifazate cu rotorul în scurtcircuit alimentateprin invertoare de tensiune. Sielmen –2001, vol. I, pp. 21-22, Chişinău, Moldova.

82. Muşuroi, S., Olărescu, V. The Mathematical Model for Three- Phase CageInduction Motors Supplied by Static Frequency Converters. International AegeanConference on Electrical Machines and Power Electronics, ACEMP 2001,Kusadasi, Turkey.

83. Muşuroi, S., Olărescu, V. The Equivalent Factors Determination of RotorParameters Modification in Case of Cage Induction Motors Supplied by StaticFrequency Converters. Applied Research Review on Technology andAutomation, Pireu, 2000, Greece.

84. Muşuroi, S., Bogoevici, Gh. The Determination of the Equivalent ModificationFactors of the Rotoric Parameters while the Cage Induction Motors are BeingSupplied by Invertors. 15th International Conference on Electrical Machines,ICEM 2001, Bruges, Belgium.

85. Schönfeld, R., Habiger, E. Automatisierte Elektroantriebe. VEB Verlag Technik,Berlin, 1981.

86. Atanasiu, Gh., Soran, I.F., Muntean, N., Şorândaru, C., Popovici, D., Andreescu,Gh.D. Servomotoare sincrone pentru acţionări electrice. Editura Mirton,Timişoara, 2003.

87. Bose Bimal, K. Power Electronics and Variable Frequency Drives. Technologyand Applications, IEEE Press, New York, 1996.

88. Boldea, I., Nasar, S.A. Electric Drives, CRC Press, 1998.89. Miller, T.J. Brushless Permanent – Magnet and Reluctance Motor Drives,

Claredon Press-Oxford, 1989.90. Boldea, I. Parametrii maşinilor electrice. Editura Academiei Române, Bucureşti,

1991.91. Lipo, T.A. A cartesian vector approach to reference frame theory of AC

machines. Research Report WEMPEC, Madison, Wiscousin, USA, 1984.92. Bausch, H., Friedrich, J., Kolletsche, H.D. Symmetrical component

representation of variable speed ac modular permanent magnet machines.International Conference on Electrical Machines, Pisa, Sept. ‘88.

93. Gieras, J., Wing, M. Permanent Magnet Motor Technology. Design andApplications. Second Edition, Marcel Dekker, Inc., New-York, 2002.

Bibliografie 531

94. Bowers, B. Philips Techn. Review 35(4): 77-95, 1975.95. Cremer, R. Current status of rare-earth permanent magnets. Int. Conf. on Maglev

and Linear Drives, Hamburg, Germany, pp.391-398, 1988.96. Lajoie-Mazenc, M., ş.a. An electrical machine with electronic comutation using

high energy ferrite. In: Proceedings of the Conference on Small ElectricalMachines, London, pp.31-34, 1976.

97. Binns, K.J., Molineaux, D.C., Bornard, W.R. Some aspects of the developmentand design of a high performance permanent magnet synchronous motor.Proceeding of the Conference on Small Electrical Machines, London, pp. 76-77,1976.

98. Cornell, D.P. Permanent magnet a.c. motors. In: Proceedings Conference DrivesMotors/Controls – 83, Harrigate, U.K., pp.102-107, 12-14 October, 1983.

99. Binns, K.J., Chabaan, F., Lisboa, P.J.G., Mellor, P.H. The role of neodymum-iron-boron in relation to other materials for permanent magnet machines.Conference on Electrical Machines and Drives, London, Sept. ‘88.

100. *** - Servomotoare, I.C.P.E. Bucureşti.101. *** - Prospecte Siemens.102. Vasiliev, D.V., Mitrofanov, B.A. Calculul şi proiectarea sistemelor de urmărire.

Editura Tehnică, Bucureşti, 1966.103. Măgureanu, R., Vasile, N. Motoare sincrone cu magneţi permanenţi şi reluctanţă

variabilă, Editura Tehnică, Bucureşti, 1982.104. Murphy, J., Turnbull, F. Power Electronic Control of AC Motors. Pergamon

Press, British Library, London, 1988.105. Rajashekara, K., Kawamura, A., Matsuse, K. Sensorless Control of AC Motor

Drives, New York, IEEE Press, 1996.106. Cruickshank, J.O., Menzies, R.W. Axially Laminated Anisotropic Rotors for

Reluctance Motors. Proc. IEEE, vol.113, 1966.107. Vagati, A., Pastorelli, M., Franceschini, G. Design of low-torque-ripple

synchronous reluctance motors. IEEE IAS Annu. Meet,. pp. 286-293, Oct.1997.108. Zuncheng, Z., Spooner, E. High-speed reluctance machines with mixed-pole

windings. Proc. Inst. Elect. Eng., vol.138, pt. B, pp. 257-263, Sept.1991.109. Fratta, A., Troglia, G.P., Vagati, A., Villata, F. Evaluation of torque-ripple in

high performance synchronous reluctance machines. IEEE IAS Annu. Meet., pp.163-170, 1993.

110. Krishnan, R. Switched reluctance motor drives. CRC Press, New York.111. Kuen-Der Wu, Hurng-Liahng Jou. A New Peak Detection Method for the Three-

Phase Sinusoidal Signals. IEEE Transaction on Industrial Electronics, vol. 45,no. 4, August 1998.

112. Mohan, N., Underland, T., Robbins, W. Power Electronics. John Wiley@ Sons,Inc., New York, 1995.

Bibliografie532

113. Popovici, D. Bazele convertoarelor statice. Editura Politehnica, Timişoara, 1999.114. Dehmlow, M., Hermann, K., Sommer, R. Resonant inverter systems for drive

applications. EPE Journal, nr. 4/1992.115. Bose, B. Power Electronics and Variable Frecvency Drives. IEEE Press, New

York, 1997.116. Kordik, K.S. The Step Motor – what it is and does. Proceedings, Third Ann.

Symp. on Incr. Mot. Contr. Syst. and Dev., Univ. of Illinois, SUA, 1977.117. Kisch, D.O. Sisteme de reglare automată a maşinilor de curent alternativ. Editura

ICPE, Bucureşti, 1998.118. Gabriel, R., Leonhard, W. Microprocessor control of induction motor.

International Semiconductor Power Converter Conference, 1982.119. Garces, L.J. Ein Verfahren zur Paramteranpassung bei der Drehzahlregelung der

umrichtergespeisten Käfigläufermaschine. Diss. TH Darmstadt, 1978.120. Kisch, D.O. Reglarea vectorială a maşinilor de curent alternativ. Editura ICPE,

Bucureşti, 1997.121. Takahashi, I., Noguchi, T. A new quick response and high-efficiency control

strategy of an induction motor. IEEE Trans. Industry Applications, vol. 22, no.5,Sept./Oct., 1986.

122. Boldea, I., Nasar, S. Vector Control of AC Drives. CRC Press, Inc. 2000,Florida, 1992.

123. Buja, G., Kazmierkowski, M. Direct Torque Control of PWM Inverter–Fed ACMotors–A Survey. IEEE Trans. Industrial Electronics, vol. 51, no. 4, August,2004.

124. Xue, Y., Xu, X., Habetler, T.G., Divan, D.H. A stator flux-oriented voltagesource variable-speed drive based on dc link measurement. IEEE Trans. IndustryApplications, vol. 27, no. 5, Sept./Oct., 1991.

125. Muntean, N. Convertoare statice. Editura Politehnica, Timişoara, 1998.126. Kazmierkowski, M.P., Sulkowski, W. A nowell control scheme for transistor

PWM inverter-fed induction motor drive. IEEE Trans. Industrial Electronics, vol.38, no.1, Feb., 1991.

127. Casadei, D., Serra, G., Tani, A. Implementation of a Direct Torque ControlAlgorithm for Induction Motors Based on Discrete Space Vector Modulation.IEEE Trans. on Power Electronics, vol. 15, no. 4, July, 2000.

128. Casadei, D., Serra, G., Tani, A. Improvement of Direct Torque ControlPerformance by Using a Discrete SVM Technique. The 29th IEEE PESC 98, vol.2, 1998.

129. Boldea, I., Nasar, S.A. Torque Vector Control–A Class of Fast and RobustTorque, Speed and Position Digital Controllers for Electric Drives. Proceedingsof EMPS, vol. 15, 1988.

Bibliografie 533

130. Holtz, J. Speed estimation and sensorless control of AC machine. Conf. Rec.IEEE IECON, 1993.

131. Ishida, M., Iwata, K. A new slip frequency detector of an induction motorutilizing motor slot harmonics. IEEE Trans. Ind. Applicat, vol. IA-20, May/Juno,1984.

132. Hurst, K.D., Habetler, T.G. Sensorless speed measurement using currentharmonics spectral estimation in induction machine drives. IEEE Trans. PowerElectronics, vol. 11, Jan.1996.

133. Blaschke, F., Van der Burgt, T., Vandenput, A. Sensorless direct field orientationat zero flux frequency. Conf. Rec. IEEE-IAS Annu. Meeting, 1996.

134. Yong, S.I., Choi, J.W., Sul, S.K. Sensorless vector control of induction machineusing high frequency current injection. Conf. Rec. IEEE-IAS Annu. Meeting,1994.

135. Ha, J.I., Sul, S.K. Sensorless field-orientation control of an induction machine byhigh-frequency signal injection. IEEE Trans of Industry Applications, vol. 35,no.1, January/February, 1999.

136. Joetten, R., Maeder, J. Control methods for good dynamic performance inductionmotor drives based on current and voltage as measure quantities. IEEE Trans. onIndustry Applications, vol. IA – 19, May/June, 1983.

137. Kim, Y.R., Sul, S.K., Park, M.H. Speed Sensorless Vector Control of InductionMotor Using Extended Kalman Filter. IEEE Trans. on Industry Applications, vol.30, no. 5, Sept./Oct., 1994.

138. Dumitrescu, A., Ştefan, I. Comanda numerică a acţionărilor electrice de tipsensorless. Editura ICPE, Bucureşti, 2000.

139. Chen, F., Dunnigan, M.W. Comparative Study of a Sliding-Mode Observer andKalman Filters for Full State Estimation in an Induction Machine. IEEProceedings on Electric Power Applications, vol. 149, no. 1, January, 2002.

140. Schroedl, H. Sensorless Control of AC Machines at Low Speed and StandstillBased on the Inform Method. IAS Meeting, 1996.

141. Fukuda, T., Shibata, T. Theory and Applications for Neural Networks forIndustrial Control Systems. IEEE, Transaction on Ind. Electronics, vol. 39, no. 6,1992.

142. Simoes, M.G., Bore, K.B. Neural Networks Based Estimation of FeedbackSignals for a Vector Controlled Induction Motor Drive. IEEE Transaction onIndustry Application, vol. 31, no. 3, May/June, 1993.

143. Ben-Brahim, L., Kurosawa, R. Identification of Induction Motor Speed UsingNeural Networks. IEEE PCC-Yokohama, 1993.

144. Schroedl, M. Digital Implementation of a Sensorless Control Algorithm forPermanent Magnet Synchronous Motors. Proc. Int. Conference on Evolution andModern Aspects of Synchronous Machines, SM 100’91, Zurich, 1991.

Bibliografie534

145. Levi, E., Sokola, M., Mironovic, V., Rauski, D. A study of permanent magnetsynchronous machine with current control in stationary and field – orientedreference frame. Proc. Int. Conference on Evolution and Modern Aspects ofSynchronous Machines, SM 100’ 91, Zurich, 1991.

146. Robyns, B., Buyse, H., Labrique, F., Sente, P. PM synchronous actuator digitalcontrol based on field orientation and decoupling state feedback. Proc. Int. Conf.on Electric Machines ICEM’92, 1992.

147. Krafka, P., Kunze, P., Henrichfreise, H. DSP controller for synchronous drives.PCIM Europe, Jan./Feb., 1994.

148. Nash, J.N. Direct torque control, induction motor vector control without anencoder. IEEE Trans. Ind. Appl., vol. 33, no. 2, March/April, 1997.

149. Matsui, N. Sensorless PM brushless DC motor drives. IEEE Trans. IndustrialElectronics, vol. 43, no. 2, April, 1996.

150. Sepe, R.B., Lang, J.H. Real-time adaptive control of permanent-magnetsynchronous motor. IEEE Trans. Ind. Applications, vol. 27, no. 4, 1991.

151. Ertugrul, N., Acarnley, P.P. A new algorithm for sensorless operation ofpermanent magnet motors. IEEE Trans. Industry Applications, vol. 30, no. 1,Jan/Feb., 1994.

152. Schroedl, H. Control of permanent magnet synchronous machines using a newposition-estimator. Proc. Int. Conference on Electric Machine ICEM’ 90, Boston,August, 1990.

153. Nozari, F., Mezs, R.P.A., Julian, A.I., Sun, C., Lipo, T.A. Sensorlesssynchronous motor drive for use on commercial transport airplanes. IEEE Trans.Industry Applications, vol. 31, no. 4, July/August, 1995.

154. Andreescu, G.D. Nonlinear observer for position and speed sensorless control ofpermanent magnet synchronous motor drives. Proc. 6th International Conferenceon Optimization of Electric and Electronic Equipments OPTIM ’98, Braşov,May, 1998.

155. Ryvkin, S. Sliding mode based observer for sensorless permanent magnetsynchronous motor drive. Proc. 7th Int. Power Electronic @ Motion ControlConf. PEMC’ 96, Budapest, September, 1996.

156. Tomita, M., Senjyu, T., Doki, S., Okuma, S. New sensorless control for brushlessDC motors using disturbance observer and adaptive velocity estimators. IEEETrans. Ind. Electronics, vol. 45, no. 2, April, 1998.

157. Stone, A.C., Buckley, M.G. Ultra high performance brushless dc drive. Proc.Conference Drives/Motors/Controls, 1984.

158. Schroedl, M., Weinmeier, P. Sensorless control of reluctance machines atarbitrary operating conditions including standstill. IEEE Trans. Power Electron.,vol. 9, Mar. 1994.

159. Lagerquist, R., Boldea, I., Miller, T.J.E. Sensorless control of the synchronousreluctance motor. IEEE Trans. Ind. Applicat., vol. 30, May/June, 1994.

Bibliografie 535

160. Arefeen, M.S., Ehsani, M., Lipo, T.A. An analysis of the accuracy of indirectshaft sensor for synchronous reluctance motor. IEEE Trans. Ind. Applicat., vol.30, Sept./Oct., 1994.

161. Jovanovic, M., Betz, R.E., Platt, D. Position and speed estimation of sensorlesssynchronous reluctance motor. Proc. IEE PEDS ’95 Conf. Singapore, Feb. 1995.

162. Xiang, Q.Y., Nasar, S.A. Estimations of rotor position and speed of asynchronous reluctance motor for servodrives. Proc. Ind. Elect. Eng., vol. 142,no. 3, May, 1995.

163. Matsuo, T., Lipo, T.A. Rotor position detective scheme for synchronousreluctance motor based on current measurements. IEEE Trans. Ind. Applicat.,vol. 31, July/Aug., 1995.

164. Boldea, I., Nasar, S.A. Torque vector control of axially-laminated anisotropicrotor reluctance synchronous motors. Elect. Mach. Power Syst., vol. 19, 1991.

165. Jovanovic, H.G., Betz, R.E., Platt, D. Sensorless vector controller for asynchronous reluctance motor. IEEE Trans. Ind. Applicat., vol. 34, Mar./Apr.,1998.

166. Ogasawara, S., Akagi, H. Implementation and position control performance of aposition-sensorless IPM motor drive system based on magnetic saliency. Conf.Rec. IEEE-IAS Annu. Meeting, vol. I, 1997.

167. Jansen, P.I., Lorenz, R.D. Transducerless position and velocity estimation ininduction and salient AC machines. Conf. Rec. IEEE-IAS Annu. Meeting, vol. I,1994.

168. Corley, M.J., Lorenz, R.D. Rotor position and velocity estimation for apermanent magnet synchronous machine at stand still and high speeds. Conf.Rec. IEEE-IAS Annu. Meeting, vol. I, 1996.

169. Consoli, A., Russo, F., Scarcella, G., Testa, A. Low and zero speed sensorlesscontrol of synchronous reluctance motors. IEEE Trans. Ind. Applicat., vol. 35,Sept./Oct., 1999.

170. Kang, S.I., Ha, J.I., Sul, S.K. Position controlled synchronous reluctance motorwithout rotational transducer. Conf. Rec. IEEE-IAS Annu. Meeting, vol. I, 1998.

171. Capecchi, E., Guglielmi, P., Pastorelli, M., Vagati, A. Position SensorlessControl of the Transverse-Laminated Synchronous Reluctance Motor. IEEETrans. Ind. Applicat., vol. 37, Nov./Dec., 2001.

172. Boldea, I., Muntean, N., ş.a. Distributed Anisotropy Rotor Synchronous Motors-Proving High Motor Performance and a New Motion Sensorless Controller.PCIM-92, vol. 21, Nürnberg, 1992.

173. Vanci, Gh. Contribuţii privind sistemele de acţionare electrică cu maşină cureluctanţă variabilă. Teză de doctorat, Universitatea Politehnica Timişoara,Facultatea de Electrotehnică, Timişoara, 2002.

174. Brad, P., Vanci, Gh. Efficient Power Drives for the Switched Reluctance Motor.PEMC ’96, Budapest, September, 1996.

Bibliografie536

175. Bass, J.T. Simplified electronics for torque control of sensorless switched-reluctance motor. IEEE Trans. Ind. Electron., vol. 34, April, 1985.

176. Amar, B.L., Dessaint, L.A., Akhrif, O., Olivier, G. Adaptive feedbacklinearisation for position control of switched-reluctance motor: Analysis andsimulation. Int. J. Adapt. Control Signal Process, vol. 7, no. 2, Mar./April, 1993.

177. Acarnley, P.P., Hill, R.J., Hooper, C.W. Detection of rotor position in steppingand switched-reluctance motors by monitoring of current waveforms. IEEETrans. Ind. Electron., vol. 32, June, 1985.

178. Lyons, J.P., MacMinn, S.R., Preston, M.A. Flux/current method for SRM rotorposition estimation. Conf. Rec. IEEE-IAS Annu. Meeting, 1991.

179. Ehsani, M., Husain, I., Kulkarni, A.B. Elimination of discrete position sensor andcurrent sensor in switched reluctance motor drives. IEEE Trans. Ind. Applicat.,vol. 28, Jan./Feb., 1992.

180. Kjaer, P.C., Blaabjerg, F., Pedersen, J.K., Nielsen, P., Andersen, L. A newindirect rotor position detection method for switched reluctance drives. Proc.ICEM ’94, vol. 2, Paris, 1994.

181. Gallegos-Lopez, G., Kjaer, P.C., Miller, T.J.E. A new sensorless method forswitched reluctance motor drives. IEEE Trans. Ind. Applicat, vol. 34, July/Aug.,1998.

182. Acarnley, P.P., French, C.D., Al-Bahadly, I.H. Position estimation in switchedreluctance drives. Proc. EPE ’95, vol. 3, 1995.

183. Ertugrul, N., Acarnley, P.P. A new algorithm for sensorless operation ofpermanent magnet motors. IEEE Trans. Ind. Applicat., vol. 30, Jan/Feb., 1994.

184. Atanasiu, Gh., ş.a. Soluţii tehnice noi privind sistemele de acţionare electrică cumotoare sincrone cu reluctanţă variabilă şi înfăşurări statorice concentrate.Contract de cercetare cu Ministerul Industriilor, Faza I, Martie, 1993.

185. Atanasiu, Gh., ş.a. Soluţii tehnice noi privind sistemele de acţionare electrică cumotoare sincrone cu reluctanţă variabilă şi înfăşurări statorice concentrate.Contract de cercetare cu Ministerul Industriilor, Faza II, Iunie, 1993.

186. Bolognani, S., Ognibeni, E., Zigliotto, M. Sliding Mode Control of the EnergyRecovery Chopper in a C-Dump Switched Reluctance Motor Drive. IEEE Trans.on I.A., Jan./Feb., 1993.

187. Bose, B.K., Miller, T.J.E., Szczeny, P.N. Microcomputer Control of SRM. IEEETrans. on I,A., July/August, 1986.

188. Faiz, J. Prediction of Static Magnetisation Characteristics of SwitchedReluctance Motors for General Rotor Position. EPE, Firenze, vol. I, 1991.

189. Harria, D., Lary, J. A simple motion estimator for VRM-IEEE IAS Conference,October, 1988.

190. Miller, T.J.E. Switched Reluctance Motor and their Control. Oxford UniversityPress, 1993.

Bibliografie 537

191. Olărescu, V., Muşuroi, S. Enhanced Simplified Control Algorithm for Surface-mounted Permanent Magnet Synchronous Motors with Sinusoidal Excitation.The 4th International Power Electronics and Motion Control Conference, Xi’an,China, August, 14-16, 2004.

192. Olărescu, V., Muşuroi, S. The Simplify Control Algorithm for PermanentSynchronous Motors with Sinusoidal Current Control. 16th InternationalConference on Electrical Machines, Cracow, Poland, 5-8 September, 2004.

193. Muşuroi, S., Greconici, M., Moţ, M. A Direct FOC of a Inverter Fed InductionMotor. 13th International Symposium on Power Electronics, Novi Sad, 2-4November, 2005.

194. Ferreira, C., Richter, E. About channel independence for multichannel switchingreluctance generating systems. Record of IEEE - IAS, Annual Meeting, 1996.

195. Philips, D.A. Switched reluctance drive, new aspects. IEE Trans., vol. PE - 5, no.4, 1990.

196. Miller, T.J.E. Converter volt - ampere requirements of the switched reluctancemotor drive. IEEE Trans., vol. IA - 21, no. 5, 1985.

197. Mecrow, B.C. New winding configurations of doubly salient reluctancemachines. Record of IEEE - IAS, Annual Meeting, Part.I, 1992.

198. Kyaer, P.C., Gribble, J.J., Miller, T.J.E. High grade control of switchedreluctance machines, Record of IEEE - IAS, Annual Meeting, vol. I, 1996.

199. Buss, J.T., Eshani, M., Miller, T.J.E. Robust torque control of SRM without ashaft - position sensor. IEEE Trans., vol. IA - 33, no.3, 1996.

200. Rajashekara, K., Kawamura, A., Matsuse, K. Sensorless control of a.c. drives.IEEE Press, 1996.

201. Blakeslee, T. Proiectarea cu circuite logice MSI şi LSI standard. Editura Tehnică,Bucureşti, 1988.

202. Schwartzenbach, I., Gill, K.F. System Modeling and Control, Edward Arnold,London, 1986.

203. Franklin, G., Powell, J.D., Workman, M. Digital Control of Dynamic Systems.Addison-Wesley, 1999.

204. Popovici, D. Comanda numerică a acţionărilor electrice. Editura Politehnica,Timişoara, 2002.