bromma yard

7/24/2019 Bromma Yard

1/20

YARD CRANESPREADERS


2/202

Lifting The Efficiency Of Yard OperationsProductivity gains in ship-to-shore operations can be lost if yard opera-tions are less than fully efficient. As the industry leader in crane spread-ers, Bromma understands the need to maximize performance in bothsegments of container handling. The Bromma yard family of all-electricand hydraulic spreader solutions are wellknown for their high perfor-mance/low maintenance characterist ics. Bromma yard spreaders performreliably, day after day, year after year, in some of the most demandingterminals in the world. Its this Bromma quality difference that has madeBromma the industrys first name in yard crane spreaders.

Maximizing Terminal Profitability

Bromma understands the relationship between spreader downtimeand terminal profitability. For a terminal that can achieve a boost inproductivity from a slightly more reliable spreader, the f inancial impactcan be dramatic. Higher-performance Bromma yard spreaders let termi-nals turn ships faster. Bromma twin-lift spreaders, including the YTS45separating twin-lift and the YTR40 regular twin-lift, are ideal toolsfor terminals handling high quantities of 20 containers. The YTS45separating twin-lift spreader, in part icular, offers enormous operatingflexibility. This spreader features simplified yard spreader end beams,as well as an optional Bromma Twin-Twenty Detection System (TTDS).Failsafe logic and interlocks also ensure safety. The extremely reliableBromma all-electric yard crane spreaders are ideal for terminals with ahigh proportion of 40 and 45 containers.

Eliminating Service PointsBromma yard spreaders are faster and less expensive to service, sincethe YSX40E, YSX45E, YTR40E, YTR45E and Y TS45E all-electric units haveno oil, and no oil filter to change, so that service points are yard opera-tions as efficient as your Ship-to-Shore operation eliminated, serviceintervals lengthened, and service duration shortened. The reducedservice requirements of Bromma all-electric yard spreaders makesthem ideal for automated container handling environments. Further, bylengthening service intervals and eliminating service points, Bromma

yard spreaders have an estimated 15% lower lifecycle service costs.

Easier, Faster Diagnostics: Touch-Screen

Bromma yard spreaders offer a spreader control and communica-tions system that is unmatched in this industry for versatility andperformance. Optional Bromma SCS3 touchscreen displays monitorspreader performance and provide rapid diagnosis of spreader faults.By delivering specific fault information [monitoring and recordingeach individual sensor and switch, instead of monitoring a fault group],the SCS3 touchscreen display provides technicians with very specificintelligence. Bromma SCS3prognostics also identify potential spreaderfaults anomalies in spreader performance before the spreaderbreaks down, thereby preventing downtime events. In addition, SCS3prevents downtime events by reducing electrical connections andminimizing conventional wiring. [Spreader downtime is the #1 causeof crane downtime, and electrical problems, at most terminals, are the#1 cause of spreader downtime.] The result? Bromma yard spreaderswith SCS3have fewer downtime events and shorter downtime duration.

A fleet with SCS3has fewer spreader changeouts. It delivers what leadsto higher terminal profits: higher MMBF [mean moves between failure]and lower MTTR [mean time to repair].

YARD OPERATIONS AS

EFFICIENT AS YOUR SHIP-TO-SHORE OPERATIONBromma All-electric and hydraulic spreader solutions are well-known

for their high performance/low maintenance characteristics.


3/203


4/204

YARD CRANEThe world of container handling is a tough one.Only the toughest equipment survives.

GOOD DESIGN EMERGES FROM STRONG DESIGN VALUES.At Bromma these v alues include easy accessibility, ease ofmaintenance, and interchangeable, standardized spare parts.

LESS RELIABLE SPREADERS REQUIRE MORE SERVICEmaintenance time and expense, and lead to morecapital being tied up in spreader fleet spares.


5/205

Bromma Services: SolutionsFor Real-World Container HandlingBromma yard crane spreaders are backed by the spreader industrysstrongest service organization. At Bromma our mission is not only toprovide the yard equipment terminals need, but the service and support

you need. Bromma Services solutions include everything from quickavailability to spare parts to a full spectrum of preventive and correctivemaintenance services. Bromma information services include knowledgeproducts derived from our advanced, pioneering SCS3 technology.

The Bromma mission begins with listening to our customers. Excep-tional service and support is something our customers expect, and it issomething we are committed to deliver.

Yard Spreaders Engineered To Be Feature-RichBromma yard spreaders are feature-rich. The yard family includes a sideshift capability on both hydraulic and all-electric models. YSX40E and

YSX45E single-lift spreaders are available with electric flippers. Thetwistlock head shape improves the ability to handle non aligned 20containers. The all-electric twistlock drive design is both simple andreliable, with an electric motor that drives the twistlock movement via agearbox and rods connected to each twistlock pin. The twin boxes on the

YTR40/45 and the YTS45 have increased float for better handling of non-aligned 20 containers. Electrical cabinets are mounted with speciallydesigned shock absorbers, identical to Bromma ship to shore spreaders.

Yard spreaders can be delivered with automatic electric flipper armsspecially designed for yard crane operation. The flippers can be mountedas side flippers and combined with f ixed guide arms. The flipper gearbox

is equipped with a safety function which makes the flipper retract ata force of 3000 Nm or more. Yard spreaders provided with hydraulicpowerpack can also be equipped with automatic flipper arms speciallydesigned for yard crane operation. The flippers can be mounted asside flippers and combined with fixed guide arms. The flipper motor isequipped with chock relief valves which makes the flipper arm retract ifthe oil pressure exceeds 140 bar.

Engineering excellence means careful attention to the little things inspreader design. The continuous improvement engineering philoso-phy of Bromma has led to yard spreaders that are engineered for higherperformance.

Built To Run Longer, Run TougherThe world of container handling is a tough one. Only the toughest

equipment survives. As with all Bromma products, yard crane spreadersare built to last. Bromma durability is due in part to the use of highquality steel, which is renowned for its unique combination of strength,weldability, and formability. Bromma durability is also a result of Brommadesign. Designing a better spreader doesnt necessarily mean designinga more complicated spreader. Good design emerges from strong designvalues. At Bromma these values include easy accessibility, ease ofmaintenance, and interchangeable, standardized spare parts for a reducedspare parts inventory. Finally, Bromma durability results from state-of-the-art spreader factories in Europe and Asia, where all major componentsare jig-built for a high degree of accuracy. At Bromma quality stability isone goal among many in our commitment to world-class manufacturing.

A Greater Return On InvestmentIn the end, what sets Bromma apart from competitors is a majordifference in lifetime value. A spreader fleet made up of marginallyless reliable spreaders is a more expensive spreader fleet. Less reliablespreaders require more service maintenance time and expense. Theylead to more capital being tied up in spreader fleet spares capitalthat could be re-allocated to terminal growthproducing initiatives.Less reliable spreaders lead to slower ship turns, and less efficientberth allocation, thus compromising the competitive position of yourterminal, and putting a ceiling on terminal revenue.

What determines true spreader value? Spreader value is not calculatedsimply by looking at initial spreader price. Spreader value is best calcu-lated by looking at the performance and operating costs of a spreader overa lifetime lifetime energy costs, lifetime service and maintenance costs,and most importantly, spreader reliability and productivity. The Bromma

yard family of crane spreaders delivers a higher return on investment.

The Leading Global Partner In SpreadersSelecting a spreader is also a matter of selecting a company. Brommaspreaders are backed by the strongest company in spreaders. Brommameans strength: financial strength, staying power, and safety.Bromma means knowledge: spreaders are our only business, andon a global basis we have the industrys most experienced spreaderorganization. Bromma means consistency: we have always stoodbehind our products across their lifecycle, and we never walk awayfrom a problem. Bromma means resources: our staff of nearly 550manufactures well over 2,000 spreaders a year, and our continuing

investment in R&D is the industrys highest. Finally, Bromma meansglobal: we are the spreader business partner best-equipped to meetthe needs of other global organizations.

The Bromma yard product family offers the industrys most reliableall-electric and high-performance hydraulic solutions, backed by theindustrys premier company in spreaders.

GreenLine - an all-electric product familyGreenLine spreaders from Bromma are one important step toward safeand sustainable port operating environments. They reduce consum-ables, lessen CO2 emissions through lower crane power consumption,protect water through the elimination of oil leaks, enhance workersafety, and lower spreader noise. Just as important, they producespreader lifecycle cost savings that serve to economically justify green

investment. Finally, they enhance a container terminals competitiveposition through the superior reliability of green spreader equipment.

GreenLine spreaders from Bromma are strong and light, actuallysubstantially lighter than the spreaders they replace. This significantlyreduces annual crane power consumption costs as well . As a Scandina-vian company, Bromma has a history of environmental awareness, andBromma R&D has for many years made engineering choices, in part,based on environmental concerns. Bromma is committed to environ-mental leadership in spreaders.


6/206

90 % REDUCTIONof power consumption(compared to a hydraulic spreader).

HIGH RELIABILITYwith all-electric.

RECESSED END BEAMS STOPS ACCURATELY IN ALL POSITIONS SILENT AND ENVIRONMENTAL FRIENDLY DURABLE AND STRONG despite low weight.

EASY TO MAINTAIN and long service intervals. FULFILS DESIGN CRITERIA

among DIN 15018 H2B4, FEM 1.001 and British Standard BS 2573.

YSX40E/YSX45E ALL ELECTRICYARD CRANE SPREADER

Bromma telescopic spreaders, YSX40E and YSX45E for yard cranes, areall-electric mid range yard cranes calculated for two million cycles. Thespreaders are as standard equipped with 4 x 10 tonnes lifting lugs inthe corners of the end beams for heavy lifts and for handling damagedcontainers.

The spreaders consists of a rectangular frame construction enablingeasy location on containers. The spreaders can adjust their length to lift20, 30, 40 and *45 foot containers using ISO floating twistlocks.

The all-electric spreader reduces power consumption to approximately1/10 of a regular spreader. The electrical motors only consume elec-tricity when an operation is performed. The electrical equipment andthe cable chain system are well protected in the main frame.

All motions of the spreader are controlled from the drivers cab andthere are provisions made for signals in the cab indicating the positionof the twistlocks and landing pin st atus.

Made of high quality steel, the YSX40E and YSX45E spreaders provideshigh lifting capacity with a low nominal tare weight thanks to the boxdesign of the telescoping arms and the main frame. The spreaders aredesigned in accordance with DIN 15018 H2B4. All components can beeasily assembled, adjusted, removed and are accessible for inspectionand maintenance.

YSX40E and YSX45E are silent and price worthy alternative for mostapplications, particularly in environmentally sensitive terminals.

LIFTING CAPACITY (According to DIN 15018 H2B4 )

One container 41 tonnes, 10%

eccentric load

LIFTING LUGS4 x 10 tonnes in end beams

HOISTING SPEED

Max 1 m/s

WEIGHTYSX40E: 5.7 tonnes

(without extra equipment)

YSX45E: 6.4 tonnes


TELESCOPIC MOTIONYSX40E: 20 to 40 in approx. 25 sec.

YSX45E: 20 to 45 in approx. 30 sec.

TWISTLOCK ROTATION90 in approx. 1 sec.

POWER SUPPLY

400/230 V AC 50 Hz or otherwiseas agreed

MAX POWER CONSUMPTION03.0 kW

CONTROL VOLTAGE24 V DC

INSTALLED POWER

Telescopic system 3.0 kW Twistlock system 2 x 0.37 kW

Total on spreader 3,75 kW

ELECTRICAL CABINETStainless steel IP66

SURFACE CONDITIONINGSand-blasted SA 2.5

50 microns 2-component zinc epoxy

70 microns 2-component MIO epoxy

40 microns 2-component acrylic epoxy 40 microns 2-component acrylic epoxy

20 30 40 *45 (*only YSX45E.)

Container combinations with YSX40E/YSX45E

Technical Data YSX40E/YSX45E


7/207

ENVIRONMENTAL FRIENDLYdue to its all electric design.

HIGH RELIABILITYwith all-electric.

FAST TROUBLE SHOOTING

ADVANCED SCS3

communications system reducesdowntime considerably.

FULFILS THE DESIGN CRITERIAamong DIN 15018 H2B4, FEM 1.001 andBritish St andard BS 2573.

SILENT AND ENVIRONMENTAL FRIENDLY

YTR40E/YTR45E ALL ELECTRICTWINLIFT YARD CRANE SPREADER

The telescopic spreaders are of rectangular frame construction enablingeasy location on containers. The spreaders are as standard equipped with4 x10 tonnes lifting lugs in the corners of the end beams for heavy lifts andfor handling damaged containers.

The design with recessed end beams makes handling of lashing framespossible. All motions of the spreader are controlled from the driverscab and there are provisions made for signals in the cab indicating theposition of the twistlocks and landing pin status. All movements of the

YTR40E and YTR45E are electrically driven. This means that the spreaderis silent and consumes energy only when moving.

Made of high quality steel, the standard YTR40E and YTR45E spreaderprovides high lifting capacity with a low nominal tare weight thanksto the box design of the telescoping beams and the main frame. Thespreader is designed in accordance with DIN 15018 H2B4. All compo-nents can be easily assembled, adjusted, removed and are accessible forinspection and maintenance.

The spreader comes with the SCS3(Spreader Control System), reducingand preventing downtime through improvements in the area ofelectrical connections. It will also shorten downtime through fasterspreader fault diagnostics.



eccentric loaded

Twinlift of two 20 containers

2x32.5 tonnes evenly loaded

LIFTING LUGS4x10 tonnes in the

main frame and the end beams.

WEIGHTYTR40E: 9.1 tonnes


YTR45E: 10.6 tonnes


TELESCOPIC MOTIONYTR40E: 20 to 40 in 28 sec.

YTR45E: 20 to 45 in 30 sec.


TWINLIFT UNIT UP/DOWNApprox. 6 sec.

POWER SUPPLY400/230 V AC 50 Hz or otherwise

as agreed

MAX POWER CONSUMPTION0-3,5 kW

CONTROL SYSTEMSCS3


INSTALLED POWERTelescopic system 3kW

Twistlock system 2x0.37kW + 4x0.12kW

Twin hoist 2x0.25kW





40 microns 2-component acrylic epoxy


Technical Data YTR40E/YTR45E

20 30 40 *45 2 x 20 (*only YTR45E)

Container combinations with YTR40E/YTR45E


8/208

YTS45E ALL ELECTRIC SEPARATINGTWINLIFT YARD CRANE SPREADER

With the Bromma all electric adjustable twinlift Spreader YTS45E a

larger percentage of above-deck containers can be transported in twin-lift mode. The twinlif t spreader can move two 20 foot containers from aspacing of 0 to 1.6 metres (0 to 5 foot) under full load while suspendedunder the twistlocks.

Two containers can be moved synchronised towards one another andapart from one another. The movements can be done at anytime in thecrane cycle and are mechanically controlled to be symmetrical. There isno stopping time to change the container spacing.

The telescopic spreader YTS45E is of rectangular frame constructionenabling easy location on containers. The spreader is as standardequipped with 4 x10 tonnes lifting lugs in the corners of the end beamsfor heavy lifts and for handling damaged containers.

The design with recessed end beams makes handling of lashing frames

possible. All motions of the spreader are controlled from the driverscab and there are provisions made for signals in the cab indicating theposition of the twistlocks and landing pin st atus.

All movements of the YTS45E are electrically driven. This means that thespreader is silent and consumes energy only when moving.

Made of high quality steel, the standard YTS45E spreader provides highlifting capacity with a low nominal tare weight thanks to the box designof the telescoping beams and the main frame. The spreader is designed inaccordance with DIN 15018 H2B4. All components can be easily assembled,adjusted, removed and are accessible for inspection and maintenance.

The spreader comes with the SCS3Spreader Control System, reducingand preventing downtime through improvements in the area of elec-

trical connections. It will also shorten downtime through fasterspreader fault diagnostics.



eccentric loading


2 x 32.5 tonnes evenly loaded

LIFTING LUGS4 x 10 tonnes in the main frame

and end beams

WEIGHT10.5 tonnes (without extra equipment)

SEPARATING CAPACITY01600 mm with full load

TELESCOPIC MOTION20 to 45 in approx. 30 sec.



TWIN EXPAND/RETRACTApprox. 18 sec.

POWER SUPPLY400/230 V AC 50 Hz or otherwise as agreed

MAX POWER CONSUMPTION0-5.9kW

CONTROL SYSTEMSCS3Spreader Control System


INSTALLED POWERTelescopic system 2x2.2kW

Twin separating 1.5kW

Twistlock system 2x0.37kW + 4x0.12kW

Twin hoist 4x0.12kW







20 30 40 45 2 x 20Container combinations with YTS45E (separating twinlift)

TWO 20 CONTAINERScan be moved apart from 0 to 1.6

metres (05) under full load. RECESSED END BEAMS

ENVIRONMENTAL FRIENDLYdue to its all-electric design.

ADVANCED SCS3communications system reducesdowntime considerably.

FAST TROUBLE SHOOTING FULFILS THE DESIGN CRITERIAamong DIN 15018 H2B4, FEM 1.001and British Standard BS 2573.

Technical Data YTS45E


9/209

HIGH LIFTING CAPACITY RECESSED END BEAMS

BOLTED SIDE GUIDES ROBUST AND WELL PROVEN DESIGN LONG ECONOMIC LIFE

FULFILS DESIGN CRITERIAamong DIN 15018 H2B4, FEM 1.001and British Standard BS 2573.

YSX40/YSX45YARD CRANE SPREADER

The Bromma YSX40 and YSX45 are two heavy-duty yard crane spreaders

calculated for 2 million cycles. The spreaders can adjust their length tolift 20, 30, 40 and *45 foot containers using ISO floating twistlocks.

The telescopic spreader is of a rectangular frame construction enablingeasy location on containers. The design with recessed end beams makeshandling of lashing frames possible. As a standard, the spreader isequipped with 4 x 10 tonnes lifting lugs in the corners of the end beamsfor heavy lifts and for handling damaged containers.

All motions of the spreader are controlled from the drivers cab andthere are provisions made for signals in the cab indicating the positionof the twistlocks and landing pin status. Control valves for twistlock andguide arms are mounted on the end beams, in order to simplify mainte-nance and to minimize the number of hydraulic hoses in the cable chainsystem. Several guide arm combinations are available.

The electrical components and the cable chain system are well protected

inside the main frame. The hydraulic power pack is entirely enclosed withinthe main frame to ensure maximum protection. The complete hydraulicunit is shock mounted in one sturdy frame with protective covers.

Made of high quality steel, the standard YSX40 and YSX45 yard spreaderprovides high lifting capacity with a low nominal tare weight thanksto the box design of the telescoping arms and the main frame. Thespreader is designed in accordance with DIN 15018 H2B4. All compo-nents can be easily assembled, adjusted, removed and are accessible forinspection and maintenance.



eccentric loaded

LIFTING LUGS4 x 10 tonnes in end beams

WEIGHT

YSX40: 7.6 tonnes(without extra equipment)

YSX45: 9.4 tonnes(without extra equipment)

TELESCOPIC MOTIONYSX40: 20 40 in approx. 28 sec.

YSX45: 20 45 in approx. 30 sec.


HYDRAULICS

System pressure 100 barPiston pump pressure compensated

Maximum flow 50 l/min

Shock valve setting telescoping 70 bar


as agreed


CONTROL VOLTAGE

24 V DC





40 microns 2-component acrylic epoxy 40 microns 2-component acrylic epoxy

20 30 40 *45 (*only YSX45)

Container combinations with YSX40/YSX45

Technical Data YSX40/YSX45


10/2010

YTR40/YTR45 TWINLIFTYARD CRANE SPREADER

The Bromma YTR40 and YTR45 are heavy-duty yard crane spreaderscalculated for 2 million cycles. They are designed for twinlift capabilityand can handle two 20 foot containers at the same t ime or one 40 or one45 foot container. The design is well proven and structurally based onthe Bromma Ship to Shore spreaders.

The telescopic spreader is of a rectangular frame construction enablingeasy location on containers. The design with recessed end beams makeshandling of lashing frames possible. As a standard, the spreader isequipped with 4 x 10 tonnes lifting lugs in the corners of the end beamsfor heavy lifts and for handling damaged containers.

All motions of the spreader are controlled from the drivers cab andthere are provisions made for signals in the cab indicating the positionof the twistlocks and landing pin status. Control valves for twistlock and

guide arms are mounted on the end beams, in order to simplify mainte-nance and to minimize the number of hydraulic hoses in the cable chainsystem. Several guide arm combinations are available.

The electrical components and the cable chain system are well protectedinside the main frame. The hydraulic power pack is entirely enclosed withinthe main frame to ensure maximum protection. The complete hydraulicunit is shock mounted in one sturdy frame with protective covers.

Made of high quality steel, the standard YTR40 and YTR45 spreaderprovides high lifting capacity with a low nominal tare weight thanks tothe box design of the telescoping arms and the main frame. The spreaderis designed in accordance with DIN 15018 H2B4. All components can beeasily assembled, adjusted, removed and are accessible for inspectionand maintenance.

CALCULATED FOR 2 MILLION CYCLES TWINLIFT CAPABILITY HIGH LIFTING CAPACITY

RECESSED END BEAMS ROBUST AND WELL PROVEN DESIGN LONG ECONOMIC LIFE

FULFILS DESIGN CRITERIAamong DIN 15018 H2B4, FEM 1.001

and British Standard BS 2573.



eccentric loading




and end beams

WEIGHTYTR40: 9.1 tonnes


YTR45: 10.6 tonnes


TELESCOPIC MOTIONYTR40: 20 to 40 in approx. 28 sec.

YTR45: 20 to 45 in approx. 30 sec.



HYDRAULICSSystem pressure 100 bar

Piston pump pressure compensated

Maximum flow 50 l/min

Shock valve setting telescoping 70 bar


as agreed









20 30 40 *45 2 x 20 (*only YTR45)

Container combinations with YTR40/YTR45

Technical Data YTR40/YTR45


11/2011

YTS45 SEPARATINGTWINLIFT YARD CRANE SPREADER

The Bromma YTS45 is a heavy-duty yard crane spreader equipped withretractable twinlift unit for handling two 20 foot containers at the sametime, or one 40 or 45 foot container. The twinlift spreader can move twofully loaded 20 foot containers from a spacing of 0 to 1 metre while theyare locked onto the twistlocks and 1.6 metres under 2 x 25 tonnes load.Low noise level and robust design are some other advant ages.

The telescopic spreader is of a rectangular frame construction enablingeasy location on containers. As a standard, the spreader is equippedwith 4 x10 tonnes lifting lugs in the corners of the end beams for heavylifts and for handling damaged containers.

All motions of the spreader are controlled from the drivers cab andthere are provisions made for signals in the cab indicating the positionof the twistlocks and landing pin status. Control valves for twistlock and

guide arms are mounted at the end beams to simplify maintenance andto minimize the number of hydraulic hoses in the cable chain system.

The electrical components and the cable chain system are well protectedinside the main frame. The hydraulic power pack is entirely enclosed withinthe main frame to ensure maximum protection. The complete hydraulicunit is shock mounted in one sturdy frame with protective covers.

Made of high quality steel, the standard YTS45 spreader provides highlifting capacity with a low nominal tare weight thanks to the boxdesign of the telescoping beams and the main frame. The spreader isdesigned in accordance with DIN 15018 H2B4. All components can beeasily assembled, adjusted, removed and are accessible for inspectionand maintenance.



eccentric loading




and end beams

WEIGHT11.2 tonnes (without extra equipment)

SEPARATING CAPACITY01600 mm up to 2 x 25 tonnes

TELESCOPIC MOTION20 to 45 in approx. 30 sec.

GUIDE ARMSFixed

TWISTLOCK ROTATION90 in approx. 1.5 sec.


TWIN EXPAND/RETRACTApprox. 30 sec.

HYDRAULICASystem pressure approx. 120 bar

Piston pump pressure compensated

POWER SUPPLY400/230 V AC 50 Hz or otherwise as agreed









20 30 40 45 2 x 20Container combinations with YTS45 (separating twinlift)

RETRACTABLE T WINLIFT HIGH LIFTING CAPACITY RECESSED END BEAMS

ROBUST AND WELL PROVEN DESIGN LONG ECONOMIC LIFE BOLTED SIDE GUIDES

FULFILS DESIGN CRITERIAamong DIN 15018 H2B4, FEM 1.001

and British Standard BS 2573.

Technical Data YTS45


12/2012

YSC40 COMBI SPREADER

The YSC40 grapple arm spreader has fully retract able grapple arms forblock stacking operations. The spreader is capable of top-lifting 20,30 or 40 ISO containers, as well as bottom lift ing containers and swapbodies at 4876 mm centres, up to 9 6 high and 2,6 m wide.

Grapple arms lower automatically from the parked to the lifting posi-tion. Prior to lif ting, the grapple arms squeeze automatically to ensurecorrect location in the container or swap body grapple pockets. Incor-porated in the 4 grapple feet are sensors which ensure that hoisting canonly occur if all 4 feet are correctly engaged, and that disengagementwill not occur during hoisting.

GRAPPLE ARMS / COMBI SPREADER VERSATILE HANDLING

COMPACT DESIGN BLOCK STACKING FACILITY


41 tonnes, 10% eccentric loading

LIFTING LUGS CAPACITY 4 x 10 tonnes

HOISTING SPEED

Max 1 m/s

TARE WEIGHT10.5 tonnes

GRAPPLE ARMS2 pairs with block stacking up

or down in less than 25 sec

TWISTLOCK MOTION

90 ~1.5 sec.

TELESCOPIC MOTION20 to 40 in position ~30 sec.


as agreed

CONTROL VOLTAGE

24 V DC/230 V AC/110 V AC



20 30 40 Flat + RackContainer combinations with YSC40

Technical Data YSC40


13/2013

BROMMAE-COMMERCE SYSTEMEnables you to order spare parts. The user-friendly interface together with a powerfulsearch function will ensure quick and accurate ordering of Bromma original parts.


14/2014

KEY FEATURES DUE TO BROMMAS LONG EXPERIENCE IN CONTAINER HANDLING, Bromma engineers have developed a number of smart and reliable solutions for the yard. Some of these solutions come from the tough environment of ship to shore spreaders.

THESE SPREADERS ARE DESIGNED TO WITHSTAND hard treatment with less servicing need, and have contributed

greatly to the success of Bromma and our leading market position.

All-electric drive for twistlocks

This service and power-saving design is both simple and reliable. Anelectric motor drives the twistlock movement via a gearbox and rodsconnected to each twistlock pin. Only on electric spreaders.

Box beam design / High strength steelThe well proven Bromma Box beam design ensures excellent stabilityand strength combined with easy accessibility. All Brommaspreadersare built of premium high quality steel, selected for its strength, weld-ability, and formability.

Telescoping systemThe chain driven telescopic system, with shock absorbing blocks ofspring washers and tension rods, comes directly from Brommas ship toshore spreaders.

Glide plate systemThe contact surfaces between the main frame and the telescoping beamsconsists of grease lubricated low friction glide plates. This design hasproven its reliability by being used on Brommas ship to shore spreaders forseveral years. Among the Bromma yard spreaders only Y TS45E is equippedwith rollers instead of glide plates.

SCS3Spreader Control systemThe SCS3 delivers advanced monitoring and diagnostic information.It also simplifies the spreader as it eliminates or minimizes junctionboxes, terminal strips, relays and DIN rails. The CANopen field busdecreases cabling still more.


15/2015

Floating ISO Twistlocks

A well proven construction which allows for 6 mmof float in all lateral directions, providing efficientlocating into container corner castings. The revisedtwistlock head shape improves the ability to handlenon aligned 20 containers.

Electrical CabinetA common downtime reason is connection failures caused by repetitiveimpact between the spreader and the containers. The electrical cabinetsare mounted with specially designed shock absorbers, identical to theship to shore spreaders. This together with the enclosure IP66 ensuresmany untroubled working hours.

Twin Boxes

The twin boxes on the yard spreaders has the same design as thecorresponding ship to shore models. Now with increased float . They arebetter abled to handle non aligned 20 containers.

Please note that the picture shows an YTS45E, certain items will look different for other models.


16/2016


17/2017

HANDS YOU CANDEPEND ON

IN CONTAINERHANDLING


19/2019

POWER SWL(in metric tonnes) SPEED(sec.)(kW) Even. Eccen. Twin Twistlocks 90 Telescope Operating Details

03.0 41 41


20/20

CARGOTEC SWEDEN AB BROMMA CONQUIP Box 1133, Malaxgatan 7 SE-164 22 Kista Sweden

+46 8 620 0900+46 8 739 3786 [email protected]

www bromma com

bromma yard

Documents