cad lab mannual
TRANSCRIPT
After that create a Triangle shape using " Bezier Tool " in the left toolbar, point and click to create the shape, make sure the last click is
connected with the first, or else you cannot put color in it.
Using " Shape Tool " shape the Triangle shape similar like below.
Lets put a color in it by go to the " Fountain Fill " tool in the left toolbar and apply the value below.
Copy the shape and create 2 more similar shape with different color, you can use any color that you like but in this tutorial i use green, blue
and pink mix.
Now that we have our 3 different color shape, copy and rotate the shape similar like below.
Copy and rotate it again similar like below.
Make it more vibrant by copy and rotate it again.
2.1 Step 5 : Working with Transparency
Now we are going to add some effects to the elements, select all the elements and copy it, arrange it on top of the original elements.
Select the copied elements, put a white color in it, and go to the " Interactive Transparency Tool " in the left toolbar, now you see that the
cursor are changing into glass, drag it from top to the right bottom corner of the elements to make it transparent.
After that select all the elements, flip and copy it similar like below, make sure that the copied elements are smaller than the original.
Select all the elements, flip and copy it again.
In this tutorial you will learn how to create Graffiti effects using smudge, shape, and texturing tool with Coreldraw, to create grunge and splash effects.
Tutorial Details* Program: CorelDraw 11 – X5* Difficulty: Advanced* Estimated Completion Time: 45 minutes
Step 1 : Basic ElementsFirst of all you have to use CorelDraw with version 11+. In this tutorial I use CorelDraw X5, Okay lets get started. Let’s take a look at the basic elements used to create our design :
This also will be our steps to create the design.Step 2 : Creating WorksheetOkay, now that you know the steps and elements, we will begin, first of all open your CorelDraw program, now create a new file, set the paper size to A4 and the units to centimeters.
Step 3 : Creating the Graffiti IllustrationNow that we have our worksheet set, we will begin to create the Graffiti Illustration, “Bezier” and “Shape tool”, go to the
“Bezier Tool” and create a custom diamond like shape similar like below, point and click to create the line and make sure that the first click is connected to the last click or else you can’t put color in it.
After that go to the “Shape Tool”, double click on the middle side lines to create custom node or corner, drag the new corner to the middle.
Shape it by creating new nodes or corners until it look like the picture below.
Now right click on the upper side lines and find “Convert to Curves” in the upper toolbar, in the corner you will see an arrow, drag the arrow to shape.
Using same steps as above shape it until it looks like an “S”.
After that create a triangular shape on the bottom of the “S” using “Bezier Tool”.
Shape it by following the contour of the bottom “S”.
After that select all the objects and go to the upper toolbar and press “Trim”, this will make the “S” shape hollow.
Okay after that create a “T” like shape using “Bezier Tool”.
Shape it so it will look more natural using “Shape Tool”.
Arrange it next to the “S” shape.
Using the same methods with “Bezier & Shape Tool” create an “R” like shape.
Place it next to the “T” shape.
Now lets create the “E” like shape using the same technique as above.
Shape it so it will match with the other shape.
Place it next to the other shape that you previously create.
Now select the “S” shape, flip and copy it by pressing “Left + Right mouse” while dragging the shape to the right.
Step 4 : Coloring & ExtrudeOkay now we are going to put color in the Graffiti Illustration that you previously create, go to the “Fountain Fill Tool” in the left toolbar, after you see a fountain dialog box apply the value below to create a the color.
Tips : You can create a custom color by double click on the color box.
After that select all the shape and group it by pressing “Ctrl + G”, now go to the “Extrude Tool” and apply the value below to create similar extrusion.
Separate the extrusion by pressing “Ctrl + K”, after that lets put color in it by go to the “Fountain Fill Tool” and apply the value below.
Okay now select the Graffiti Illustration and go to the “Contour Tool”, apply the value below to create similar outline.
After that create a circle shape of any size using “Ellipse Tool”.
Put color in it by go to the “Fountain Fill Tool” and apply the value below.
After that create a black cat eye lens using “Bezier & Shape Tool”.
Now copy the black lens and put the same color as the circle shape on the copied one.
Lets make it a little “Jagged”, go to the “Distortion Tool” and apply the value below.
After that create a small circle on top of the black lens using “Ellipse Tool”.
Go to the “Transparency Tool” and apply the value below to make the circle transparent.
After that we will create a base for the eye using “Bezier & Shape Tool” similar like below.
Using the same methods create a crown shape as well.
Put same color as the Graffiti Illustration and arrange it on the back of the Eye.
Group the whole thing by pressing “Ctrl + G” and arrange it on top of the Graffiti Illustration.
Step 6 : Creating Waterdrops EffectsOkay now using “Freehand” create a water drops on the bottom left corner of the Graffiti Illustration outlines.
After put same color with the Graffiti outline on the waterdrop.
Now all we have to do is copy it to all of the outline corners.
We are going to add more details by adding more waterdrops, go to the “Freehand Tool” and draw a waterdrop shape on top of the “S” shape.
Put a water gradient color in it by applying the value below.
Using the same technique you can add waterdrops as many as you like.
Step 7 : Creating the Brick WallOkay now create a box shape of any size using “Rectangle Tool”.
After that make the corner rounded by go to the corner options on the upper toolbar and apply the value below.
Put purple color in it and draw a custom corner shape on top of the brick.
Make it transparent using “Transparency Tool” apply the value below to create similar.
After that lets copy it as many as you like until it looks like a brick wall.
Select and group all the bricks by pressing “Ctrl + G” copy it and put black color on the copied one.
Copy it again arrange it on the bottom of the original brick wall.
Okay now arrange it on the bottom layer of the Graffiti Illustration by pressing “Ctrl + PageDown”.
Step 8 : Creating the Grunge EffectsOkay now that you have already get used to the “Freehand Tool” create a watersplat shape, you can create as freely as you want just make sure its looks like a watersplat.
After that go to the “Smudge Tool” and double click on the edges of the watersplat to create a splat effects.
Apply it on all edges.
After that go to the “Artistic Media Tool” in the upper toolbar find the media option and apply the value below.
Copy the splat and arrange it around the first splat shape that you previously create.
Group it all and put same color as the Graffiti Outline.
Okay now you can appy the Grunge shape to the Graffiti outline, copy it as many as you like.
Step 9 : Creating the TexturesOkay now lets create the texture, create a box shape using ” Rectangle Tool ” resize it to 24 x 17 cm.
Put pink gradient color in it.
Create a second box shape using ” Rectangle Tool ” and resize it to 24 x 19 cm.
After that go to the ” Texture Fill Tool ” select the layered marble for the texture.
Now put it on top of the Pink box shape and Graffiti Illustration, after that make it transparent by applying the value below.
Create the third box using ” Rectangle Tool ” and resize it to 24 x 19 cm.
Go to the ” Texture Fill Tool ” and select steel wool for the texture.
Okay now arrange the third box on top of the other objects, and make it transparent by applying the value below.
Final ImageAnd we are done, by using the same technique as above you can add more details to make it more natural like the final image below.
