工程集約を実現 ““““ 旋盤 旋盤ででで刻印で刻印 ......enable to stamp on...
TRANSCRIPT
Enable to stamp on deformable workpieces due to stamping
during processing
Quality improvement
Process integration・Reduce work-hours・Power saving・Automation・Low cost
工程集約を実現 ““““ 旋盤旋盤旋盤旋盤でででで刻印刻印刻印刻印 ”””” するツール
Press against workpiecesReturn to the start position automatically by springs
after stamping
※ Please contact us by e-mail for inquiries.
Marking System Division
YAMADA MACHINE TOOL CO.,LTD.
YAMADA Standard Typeface (H:W=2:1)
1-10-13, Uemine, Saitama-shi, Saitama, Japan 3380014
TEL +81-48-851-1122 FAX +81-48-851-1125
URL： http://www.yamada-mt.co.jp
E-Mail : [email protected]
● Standard specificationCharacter size : 1 to 4 mm Typeface of character ring : 【YAMADA font】
0-9, A-Z (capital letter), [―], [／], [．], [～] Length of stamping characters : Maximum 28 mmShank size : 20 mm square
● Options a-z (small letter), all characters of customer designated special font, logo, another symbols, etc.
Easy stamp replacing
Easy operation
Press against workpices,and stamp easily