电梯行业轴承解决方案

PEER carries a full range of catalog MU, DGBB and double row ball bearings. All bearings are manufactured at PEER’s TS-16949 certified facility in Xinchang, Zhejiang, China.

皮尔可以提供全系列带座外球面轴承、深沟球轴承以及双列球轴承,所有产品均来自中国浙江新昌县的通过 TS 16949认证的

生产基地。

高纯净度全淬透轴承钢保证轴承的可靠性

高等级钢球能有效减低振动和噪音

通过滚道超精减小摩擦、振动和噪音，延长轴承寿命，降低维护成本

经过实践验证的密封解决方案能有效防止润滑脂泄露，避免水汽、灰尘和其它异物侵入而影响轴承寿命

采用优良的润滑脂降低轴承的振动和噪音，提高轴承使用寿命

轴承经过100%的噪音测试，满足客户的低噪音要求

高于轴承行业的公差标准保证产品在全球范围内的互换性

Bearing Solutions for Elevator & Escalator Industries

PEER Bearing Product Features and Benefits

皮尔轴承的产品特性及优点

High quality through hardened bearing steel for improved reliability

High grade balls have improved roundness to reduce vibration and noise

Super finished raceways to reduce friction, vibration and noise resulting in

increased bearing life and reduced maintenance cost

Proven seal solution effectively retains lubricant to eliminate purge and

exclude moisture and dust resulting in extended bearing life

Premium grease to reduce vibration and noise

Bearing are 100% noise tested to meet Electric Motor OEM noise

expectations

Product tolerances exceed bearing industry standards to allow for global

interchangeability

皮

Excellent seal solutions suitable for outdoor use, can retains lubricant to eliminate purge，exclude contamination from moisture, dust and dirt which extends bearing life and reduces maintenance cost

优异的密封解决方案适合户外使用环境，能有效防止润滑脂泄

露，有效防止水汽、灰尘和其它异物侵入，有效延长轴承的寿

命，降低维护成本

梯级轮轴承解决方案

标准载荷，高级别铸铁座

轴承座实体设计

宽内圈轴承

针对不同客户需求提供相

应的密封解决方案

金属挡圈，发黑处理

带止动销钉的再润滑设计

扶手驱动轴轴承解决方案

High purity bearing steel, reinforced design and special tractor motor grease to meet customer’s expectation on low noise and long life

使用高纯净度轴承钢，加强型设计，及曳引机专用

润滑脂，完全满足客户对低噪音及长寿命的期望

曳引机轴承解决方案

Bearing Solutions for Traction Motor

Standard duty, high-grade cast ironSolid foot housing designWide inner ring bearingSeal solutions provided to meet different needsMetal slingers, black oxide platedRelubricatable unit with anti-rotation pin

扶梯轴承解决方案 Bearing Solutions for Escalator Industry

Bearing Solutions for Handrail Drive Axle

Bearing Solutions for Step Wheel

R

R

PEER manufactures a full range of inch and metric single row and double row

deep groove ball bearings, mounted ball bearings for the Global Elevator &

Escalator Market. Out global presence allows us to support Elevator/Escalator

OEM design and development in Asia, Europe, North America and South

America.

When custom solutions are required, PEER Engineers will work with the Elevator/Escalator OEM

to develop a cost effective solution.

皮尔集团为全球电梯市场提供规格齐全的英制、公制单、双列深沟球轴承、带座外球面轴承。

遍布全球的产销网络使我们有能力为亚洲、欧洲和美洲的OEM电梯客户提供产品设计与市场开

拓方面全方位的支持。

皮尔的工程师团队根据需要为OEM电梯客户提供性价比突出的轴承解决方案。

These custom solutions can include:

Special dimensions for the bore, outside diameter and ring widths

Special seals, lubricant selection and increased bearing capacity designs

Advanced life calculations to confirm bearing reliability

皮尔个性化解决方案包括：

特殊尺寸的内、外径及宽度

选用特殊的密封方案和润滑剂，以及增

强承载力的设计

先进的寿命计算方法确保轴承应用的可

靠度

皮尔轴承—引领电梯行业迈向新高度PEER is Raising Elevator & Escalator Industries to the Next Level

皮尔针对传统型绳轮提供双面密封解决方案，使用优异的长寿命极压润滑脂，以确保

轴承在使用过程中免维护。

同时，皮尔为采用新型橡胶带驱动系统的厂商提供一体化绳轮轴承解决方案，其特点

是将一体化的V型槽直接开在轴承外圈，该设计的主要优点在于：

避免轴承外径与绳轮之间可能产生的

相对运动

加强对轴承径向游隙的控制，提高轴

承可靠性

减少零部件，从而使设计更为紧凑

特殊的表面处理，提高产品防锈性能，

使绳轮适应较恶劣的运行环境

High-grade dimension precision and rotation precision, strict

clearance control, ensure bearing running steadily.

高等级的尺寸精度和旋转精度，严格的游隙控制，保证轴承运

转的平稳性。

旋转编码器轴承解决方案

Bearing Solutions for Rotary Encoder

直梯轴承解决方案

PEER manufactures a full range of Metric and Inch DGBB that meet

electric motor OEM stringent noise expectations. Bore sizes available up

to 150mm.

皮尔生产制造的全系列英制及公制的深沟球轴承，可以满足电机

OEM客户严格的低噪音标准。 球轴承的内径尺寸可达到150mm。

曳引机轴承解决方案

Bearing Solutions for Traction Motor

Bearing Solutions for Elevator Industry

Eliminates the possibility of relative movement between bearing OD and sheaveBetter control of bearing radial internal clearance which results in longer reliabilityThe reduction in components allows for a compact designSeals on both side of bearing, excellent long-life EP Lubricant, maintenance –free when Pulley running

绳轮轴承解决方案（一体化绳轮/传统型绳轮）

For the traditional elevator sheave, PEER provides seals on both sides of bearing and excellent long-life EP Lubricant to maintenance free

PEER designs, develops and manufactures custom bearing sheave solutions for Elevator OEM’s who offer the new generation of rubber belt driven systems. These solutions feature integrated V grooves directly into the bearing outer ring which is major design advantage for the following reasons:

Bearing Solutions for Elevator Sheave (Integrated / Traditional)

PEER manufactures a full range of inch and metric single row and double row

deep groove ball bearings, mounted ball bearings for the Global Elevator &

Escalator Market. Out global presence allows us to support Elevator/Escalator

OEM design and development in Asia, Europe, North America and South

America.

When custom solutions are required, PEER Engineers will work with the Elevator/Escalator OEM

to develop a cost effective solution.

皮尔集团为全球电梯市场提供规格齐全的英制、公制单、双列深沟球轴承、带座外球面轴承。

遍布全球的产销网络使我们有能力为亚洲、欧洲和美洲的OEM电梯客户提供产品设计与市场开

拓方面全方位的支持。

皮尔的工程师团队根据需要为OEM电梯客户提供性价比突出的轴承解决方案。

These custom solutions can include:

Special dimensions for the bore, outside diameter and ring widths

Special seals, lubricant selection and increased bearing capacity designs

Advanced life calculations to confirm bearing reliability

皮尔个性化解决方案包括：

特殊尺寸的内、外径及宽度

选用特殊的密封方案和润滑剂，以及增

强承载力的设计

先进的寿命计算方法确保轴承应用的可

靠度

皮尔轴承—引领电梯行业迈向新高度PEER is Raising Elevator & Escalator Industries to the Next Level

皮尔针对传统型绳轮提供双面密封解决方案，使用优异的长寿命极压润滑脂，以确保

轴承在使用过程中免维护。

同时，皮尔为采用新型橡胶带驱动系统的厂商提供一体化绳轮轴承解决方案，其特点

是将一体化的V型槽直接开在轴承外圈，该设计的主要优点在于：

避免轴承外径与绳轮之间可能产生的

相对运动

加强对轴承径向游隙的控制，提高轴

承可靠性

减少零部件，从而使设计更为紧凑

特殊的表面处理，提高产品防锈性能，

使绳轮适应较恶劣的运行环境

High-grade dimension precision and rotation precision, strict

clearance control, ensure bearing running steadily.

高等级的尺寸精度和旋转精度，严格的游隙控制，保证轴承运

转的平稳性。

旋转编码器轴承解决方案

Bearing Solutions for Rotary Encoder

直梯轴承解决方案

PEER manufactures a full range of Metric and Inch DGBB that meet

electric motor OEM stringent noise expectations. Bore sizes available up

to 150mm.

皮尔生产制造的全系列英制及公制的深沟球轴承，可以满足电机

OEM客户严格的低噪音标准。 球轴承的内径尺寸可达到150mm。

曳引机轴承解决方案

Bearing Solutions for Traction Motor

Bearing Solutions for Elevator Industry

Eliminates the possibility of relative movement between bearing OD and sheaveBetter control of bearing radial internal clearance which results in longer reliabilityThe reduction in components allows for a compact designSeals on both side of bearing, excellent long-life EP Lubricant, maintenance –free when Pulley running

绳轮轴承解决方案（一体化绳轮/传统型绳轮）

For the traditional elevator sheave, PEER provides seals on both sides of bearing and excellent long-life EP Lubricant to maintenance free

PEER designs, develops and manufactures custom bearing sheave solutions for Elevator OEM’s who offer the new generation of rubber belt driven systems. These solutions feature integrated V grooves directly into the bearing outer ring which is major design advantage for the following reasons:

Bearing Solutions for Elevator Sheave (Integrated / Traditional)

PEER manufactures a full range of inch and metric single row and double row

deep groove ball bearings, mounted ball bearings for the Global Elevator &

Escalator Market. Out global presence allows us to support Elevator/Escalator

OEM design and development in Asia, Europe, North America and South

America.

When custom solutions are required, PEER Engineers will work with the Elevator/Escalator OEM

to develop a cost effective solution.

皮尔集团为全球电梯市场提供规格齐全的英制、公制单、双列深沟球轴承、带座外球面轴承。

遍布全球的产销网络使我们有能力为亚洲、欧洲和美洲的OEM电梯客户提供产品设计与市场开

拓方面全方位的支持。

皮尔的工程师团队根据需要为OEM电梯客户提供性价比突出的轴承解决方案。

These custom solutions can include:

Special dimensions for the bore, outside diameter and ring widths

Special seals, lubricant selection and increased bearing capacity designs

Advanced life calculations to confirm bearing reliability

皮尔个性化解决方案包括：

特殊尺寸的内、外径及宽度

选用特殊的密封方案和润滑剂，以及增

强承载力的设计

先进的寿命计算方法确保轴承应用的可

靠度

皮尔轴承—引领电梯行业迈向新高度PEER is Raising Elevator & Escalator Industries to the Next Level

皮尔针对传统型绳轮提供双面密封解决方案，使用优异的长寿命极压润滑脂，以确保

轴承在使用过程中免维护。

同时，皮尔为采用新型橡胶带驱动系统的厂商提供一体化绳轮轴承解决方案，其特点

是将一体化的V型槽直接开在轴承外圈，该设计的主要优点在于：

避免轴承外径与绳轮之间可能产生的

相对运动

加强对轴承径向游隙的控制，提高轴

承可靠性

减少零部件，从而使设计更为紧凑

特殊的表面处理，提高产品防锈性能，

使绳轮适应较恶劣的运行环境

High-grade dimension precision and rotation precision, strict

clearance control, ensure bearing running steadily.

高等级的尺寸精度和旋转精度，严格的游隙控制，保证轴承运

转的平稳性。

旋转编码器轴承解决方案

Bearing Solutions for Rotary Encoder

直梯轴承解决方案

PEER manufactures a full range of Metric and Inch DGBB that meet

electric motor OEM stringent noise expectations. Bore sizes available up

to 150mm.

皮尔生产制造的全系列英制及公制的深沟球轴承，可以满足电机

OEM客户严格的低噪音标准。 球轴承的内径尺寸可达到150mm。

曳引机轴承解决方案

Bearing Solutions for Traction Motor

Bearing Solutions for Elevator Industry

Eliminates the possibility of relative movement between bearing OD and sheaveBetter control of bearing radial internal clearance which results in longer reliabilityThe reduction in components allows for a compact designSeals on both side of bearing, excellent long-life EP Lubricant, maintenance –free when Pulley running

绳轮轴承解决方案（一体化绳轮/传统型绳轮）

For the traditional elevator sheave, PEER provides seals on both sides of bearing and excellent long-life EP Lubricant to maintenance free

PEER designs, develops and manufactures custom bearing sheave solutions for Elevator OEM’s who offer the new generation of rubber belt driven systems. These solutions feature integrated V grooves directly into the bearing outer ring which is major design advantage for the following reasons:

Bearing Solutions for Elevator Sheave (Integrated / Traditional)

电梯行业轴承解决方案

PEER carries a full range of catalog MU, DGBB and double row ball bearings. All bearings are manufactured at PEER’s TS-16949 certified facility in Xinchang, Zhejiang, China.

皮尔可以提供全系列带座外球面轴承、深沟球轴承以及双列球轴承,所有产品均来自中国浙江新昌县的通过 TS 16949认证的

生产基地。

高纯净度全淬透轴承钢保证轴承的可靠性

高等级钢球能有效减低振动和噪音

通过滚道超精减小摩擦、振动和噪音，延长轴承寿命，降低维护成本

经过实践验证的密封解决方案能有效防止润滑脂泄露，避免水汽、灰尘和其它异物侵入而影响轴承寿命

采用优良的润滑脂降低轴承的振动和噪音，提高轴承使用寿命

轴承经过100%的噪音测试，满足客户的低噪音要求

高于轴承行业的公差标准保证产品在全球范围内的互换性

Bearing Solutions for Elevator & Escalator Industries

PEER Bearing Product Features and Benefits

皮尔轴承的产品特性及优点

High quality through hardened bearing steel for improved reliability

High grade balls have improved roundness to reduce vibration and noise

Super finished raceways to reduce friction, vibration and noise resulting in

increased bearing life and reduced maintenance cost

Proven seal solution effectively retains lubricant to eliminate purge and

exclude moisture and dust resulting in extended bearing life

Premium grease to reduce vibration and noise

Bearing are 100% noise tested to meet Electric Motor OEM noise

expectations

Product tolerances exceed bearing industry standards to allow for global

interchangeability

皮

Excellent seal solutions suitable for outdoor use, can retains lubricant to eliminate purge，exclude contamination from moisture, dust and dirt which extends bearing life and reduces maintenance cost

优异的密封解决方案适合户外使用环境，能有效防止润滑脂泄

露，有效防止水汽、灰尘和其它异物侵入，有效延长轴承的寿

命，降低维护成本

梯级轮轴承解决方案

标准载荷，高级别铸铁座

轴承座实体设计

宽内圈轴承

针对不同客户需求提供相

应的密封解决方案

金属挡圈，发黑处理

带止动销钉的再润滑设计

扶手驱动轴轴承解决方案

High purity bearing steel, reinforced design and special tractor motor grease to meet customer’s expectation on low noise and long life

使用高纯净度轴承钢，加强型设计，及曳引机专用

润滑脂，完全满足客户对低噪音及长寿命的期望

曳引机轴承解决方案

Bearing Solutions for Traction Motor

Standard duty, high-grade cast ironSolid foot housing designWide inner ring bearingSeal solutions provided to meet different needsMetal slingers, black oxide platedRelubricatable unit with anti-rotation pin

扶梯轴承解决方案 Bearing Solutions for Escalator Industry

Bearing Solutions for Handrail Drive Axle

Bearing Solutions for Step Wheel

R

R

电梯行业轴承解决方案

PEER carries a full range of catalog MU, DGBB and double row ball bearings. All bearings are manufactured at PEER’s TS-16949 certified facility in Xinchang, Zhejiang, China.

皮尔可以提供全系列带座外球面轴承、深沟球轴承以及双列球轴承,所有产品均来自中国浙江新昌县的通过 TS 16949认证的

生产基地。

高纯净度全淬透轴承钢保证轴承的可靠性

高等级钢球能有效减低振动和噪音

通过滚道超精减小摩擦、振动和噪音，延长轴承寿命，降低维护成本

经过实践验证的密封解决方案能有效防止润滑脂泄露，避免水汽、灰尘和其它异物侵入而影响轴承寿命

采用优良的润滑脂降低轴承的振动和噪音，提高轴承使用寿命

轴承经过100%的噪音测试，满足客户的低噪音要求

高于轴承行业的公差标准保证产品在全球范围内的互换性

Bearing Solutions for Elevator & Escalator Industries

PEER Bearing Product Features and Benefits

皮尔轴承的产品特性及优点

High quality through hardened bearing steel for improved reliability

High grade balls have improved roundness to reduce vibration and noise

Super finished raceways to reduce friction, vibration and noise resulting in

increased bearing life and reduced maintenance cost

Proven seal solution effectively retains lubricant to eliminate purge and

exclude moisture and dust resulting in extended bearing life

Premium grease to reduce vibration and noise

Bearing are 100% noise tested to meet Electric Motor OEM noise

expectations

Product tolerances exceed bearing industry standards to allow for global

interchangeability

皮

Excellent seal solutions suitable for outdoor use, can retains lubricant to eliminate purge，exclude contamination from moisture, dust and dirt which extends bearing life and reduces maintenance cost

优异的密封解决方案适合户外使用环境，能有效防止润滑脂泄

露，有效防止水汽、灰尘和其它异物侵入，有效延长轴承的寿

命，降低维护成本

梯级轮轴承解决方案

标准载荷，高级别铸铁座

轴承座实体设计

宽内圈轴承

针对不同客户需求提供相

应的密封解决方案

金属挡圈，发黑处理

带止动销钉的再润滑设计

扶手驱动轴轴承解决方案

High purity bearing steel, reinforced design and special tractor motor grease to meet customer’s expectation on low noise and long life

使用高纯净度轴承钢，加强型设计，及曳引机专用

润滑脂，完全满足客户对低噪音及长寿命的期望

曳引机轴承解决方案

Bearing Solutions for Traction Motor

Standard duty, high-grade cast ironSolid foot housing designWide inner ring bearingSeal solutions provided to meet different needsMetal slingers, black oxide platedRelubricatable unit with anti-rotation pin

扶梯轴承解决方案 Bearing Solutions for Escalator Industry

Bearing Solutions for Handrail Drive Axle

Bearing Solutions for Step Wheel

R

R