chassis ds gersis

7/27/2019 Chassis Ds Gersis

1/11

1-slot or 4-slot Chassis

Raisecom Technology Co., Ltd.

RC001-1-DC Chassis

Slot Number RC001/RC002-4 has 4 slots;

RC001-1 has one slot.

Power Supply AC: 100~240V, 50/60Hz;

DC: -72~-36V DC

WP: 100~240V AC or -72~-36V DC (the WP power supply connector

will adapt to the factual power supply automatically)

Power Protection overcurrent protection, short circuit protection

Network management RC002-4 is a chassis with in-built SNMP agent module. The SNMP

agent module enables the network managment over service modules in

RC002-4 and their peer devices.

In small-capacity situation, Raisecom presents

its 4-slot chassis RC001-4, 4-slot network

manageable chassis RC002-4 and single-slot chassis RC001-1 to meet customer

requirements of installing and/or managing

different service modules, including media

converter, fber optic modem, PDH multiplexer,

interface converter, G.SHDSL modem and

CWDM cards, concentratedly on one platform.

RC001-4 and RC002-4 have identical structure

and dimension.The only difference is that

RC002-4 has an in-built SNMP agent module,

and through which the four service modules

in RC002-4 can be network managed.

Fixed in RC001-1 series single-slot chassis,Raisecom's modular devices become stand-

alone equipments, and can be either placed

on table or mounted on wall or rack with

accessories. The employment of power supply

connector of RC001-1 depends on customer's

need. Except for traditional connector for AC

or DC power supply, an option of connector

for wide-range power supply is provided.

Feature

RC001/RC002-4 Chassis

Compliance

Standards UL,CE,FCC, CSAcomplied with IP30

SpecifcationDimension RC001/002-4:

440x44x266mm (WxHxD)

RC001-1:158x40x200mm (WxHxD)

Power

Consumption

RC001/002-4:40W

RC001-1:10W

Working

Temperature

0~45 degree Celsius

Relative Humidity 5%~95%

Storing

ambience

-40~70 degree Celsius

Ordering InformationRC001-1-AC 1U, 1-slot chassis, with AC power supply connector

RC001-1-DC 1U, 1-slot chassis, with DC power supply connector

RC001-1-WP 1U, 1-slot chassis, with WP wide-range power supply connector that adapts

to the factual power supply (AC or DC) automatically

RC001-1 Rack-

Mount Tray

Accessory for installing RC001-1 chassis on 19" rack, two RC001-1 can be

placed on one tray.

RC001-1 Rack-

Mount Angle

Accessory for installing RC001-1 chassis on 19" rack, one RC001-1 uses

two rack-mount angles

RC001-1 Wall-

Mount Angle

Accessory for installing RC001-1 chassis on wall, one RC001-1 users two

wall-mount angles

RC001-4-AC 1U, 4-slot chassis, with AC power supply connector

RC001-4-DC 1U, 4-slot chassis, with DC power supply connector

RC002-4-AC 1U, 4-slot chassis with in-built SNMP management agent and AC power

supply connector

RC002-4-DC 1U, 4-slot chassis with in-built SNMP management agent and DC power

supply connector

Datasheet

RC001-1-AC/WP Chassis

Bossestasse 9,06484 Quedlinburg,Deutschland

Andreas GeroldTel.: + 49(0) 3946 - 91 99 90Fax: + 49(0) 3946 - 91 99 91Mobil: + 49(0) 171 - 74 262 76E-mail: [email protected]

Michael LitvinkoTel.: + 375 17 259 11 03Fax: + 375 17 259 11 18Mobil: + 375 297 600 103E-mail: [email protected]

www.sis-group.com


2/11

RC001-1D single-slot chassis


RC001-1D Front Panel

Power Supply

Connector

AC power supply connector for AC power supply

or DC power supply connector for DC power supplyor WP power supply connector adapted to the factual power

supply (AC or DC) automaticallyPower Protection overcurrent protectionSlot Number 1 slot, with the width of 2 slot of RC002-16

RC001-1D is a single-slot chassis designed

for service modules that take up 2 slots in

RC002-16. It is applicable for telecom carrierand important enterprise user in the feld of

fnance, electric power, petroleum industry, and

etc. To provide high service capacity, some of

Raisecom's modular devices, including Ethernet

to 4/8E1 interface converters, PDH multiplexers

providing 4/8 E1 channels, and multi-service

multiplexers providing 4/8/16 plus 1 Ethernet

service, occupies 2 slots in RC002-16 . Fixed

in RC001-1D, these modular devices become

stand-alone equipments, and can be eitherplaced on table or mounted on wall or rack with

accessories. The employment of power supply

connector depends on user's need. Except

for traditional connector for AC or DC power

supply, an option of connector for wide-range

power supply is provided.

Feature

Datasheet

Compliance

Ordering Information

Standards CE and UL

SpecifcationsDimension 158x64x200mm(WxHxD)

Power Supply AC 100~240V, 50/60Hz

DC -36V~-72V

Power

Consumption

less than or equal to 15W

Working

Temperature


Humidity 5%~95%

Storing

Temperature


Application

RC001-1D-AC single-slot chassis, with a connector for AC power supplyRC001-1D-DC single-slot chassis, with a connector for DC power supplyRC001-1D-WP single-slot chassis, with a connector automatically adapted to

the factual power supply (AC or DC)Rack-Mount Tray accessory for fxing RC001-1D on to 19-inch rackRack-Mount Angle accessory for fxing RC001-1D on to 19-inch rackWall-Mount Angle accessory for mounting RC001-1D on wall

Service Modules in RC001-1D

Ethernet to E1 Interface Converters

RC954-FE(FX)4E1, RC954-2FE4E1-BL,

RC954-2FE8E1-BLPDH Multiplexer

RC832-120L, RC832-240L(-BL)

Multi-Service PDH Multiplexer

RCMS2802-120LFE(-BL), RCMS2802-

240LFE(-BL), RCMS2802-120LGE(-BL),

RCMS2802-240LGE(-BL)




www.sis-group.com


3/11

RC001-1M single-slot network-manageable chassis


RC001-1M Front Panel

Power Supply AC power supply, or DC power supply, or both AC and DC

power supplyPower Protection overcurrent protection, short circuit protection, overheat

protectionSlot Number 1 slotInterfaceType 1 SNMP interface for network management

1 CONSOLE interface for initial confguration of SNMPNetwrok

Managementnetwork management over the service module in the RC001-

1M and the device on the opposite side of the communication

RC001-1M is a single-slot chassis with in-built

SNMP management module. It is designed for

telecom carrier and important enterprise user

in the feld of fnance, electric power, petroleum

industry, and etc. Fixed in RC001-1M, modular

media converters, PDH multiplexers, interface

converters, G.SHDSL modems and other

modules designed for 1U slots become stand-

alone and network-manageable equipments.

The SNMP agent module built in RC001-1M

realizes network management function like

confguration management, diagnostics, loop

activation, monitoring and fault management.There is one console port, one Ethernet port

and one slot for modular device on the front

panel. The AC and DC power supply connectors

on the rear panel of RC001-1M provides users

with the fexibility of using AC power supply, or

DC power supply or both of them.

Feature

Datasheet

RC001-1M Rear Panel

Compliance

Ordering InformationRC001-1M single-slot chassis, with inbuilt SNMP network management

agent module, 1 AC and 1 DC power supply connector

Standards CE and UL


Power Supply AC 100~240V,0.35A,50/60Hz

DC -48V,0.6A

Power

Consumption


Working

Temperature

0~45 degree Celsius

Humidity 5%~95%

Storing

Temperature


Application

Service modules working and managed in RC001-1M

RC1~RC6 series media converters

RC8xx series PDH multiplexers providing 1/2/4 E1 channels or 1 DS1 channel or

1 DS3/E3 channel

Multi-service PDH multiplexer RCMS2x01 series and RCMS2802-60GE-BL

RC9xx series Ethernet to E1, Ethernet to DS3/E3, Ethernet to V.35, V.35 to E1

interface converters

OPCOM200 series CWDM modular equipmentsRC1102 series G.SHDSL modem


Andreas GeroldTel.: + 49(0) 3946 - 91 99 90Fax: + 49(0) 3946 - 91 99 91

Mobil: + 49(0) 171 - 74 262 76E-mail: [email protected]


www.sis-group.com


4/11

RC001-2M dual-slot network-manageable chassis


RC001-2M Front Panel

Power Supply Single AC power supply, or single DC power supply, or both

AC and DC power supply with two individual connectors or a

auto-sensing connectorPower Protection overcurrent protection, short circuit protection, overheat

protectionSlot Number 2 slotsInterfaceType 1 SNMP interface for network management

1 CONSOLE interface for initial confguration of SNMPNetwrok

Managementnetwork management over the service module in the RC001-

2M and the device on the opposite side of the communication

RC001-2M is a dual-slot chassis with in-built

SNMP management module. It is designed for

telecom carrier and important enterprise user

in the feld of fnance, electric power, petroleum

industry, and etc. Fixed in RC001-2M, modular

media converters, PDH multiplexers, interface

converters, G.SHDSL modems and other

modules that take up 2 slots in RC002-16

become stand-alone and network-manageable

equipments.The SNMP agent module built

in RC001-2M realizes network management

function like confguration management,

diagnostics, loop activation, monitoring and

fault management. There is one console port,one Ethernet port and two slots for two units

of individual single-slot width modular device

or one unit of 2-slot width modular device on

the front panel. The AC and DC power supply

connectors on the rear panel of RC001-2M

provides users with the fexibility of using AC

power supply, or DC power supply or both of

them.

Feature

Datasheet

RC001-2M Rear Panel

Compliance

Ordering InformationRC001-2M-AC/DC Dual-slot chassis, with in-built SNMP network management

agent module, 1 AC and 1 DC power supply connecters

RC001-2M-WP Dual-slot chassis, with in-built SNMP network managementagent module, 1 AC/DC auto-sensing power supply connecter

RC001-2M-AC Dual-slot chassis, with in-built SNMP network management

agent module, AC power supplyRC001-2M-DC Dual-slot chassis, with in-built SNMP network management

agent module, DC power supply

Standards CE and UL


Power Supply AC 100~240V,0.35A,50/60Hz

DC -48V,0.6A

Power

Consumption


Working

Temperature

0~45 degree Celsius

Humidity 5%~95%

Storing

Temperature


Preliminary




www.sis-group.com


5/11

RC001-2M dual-slot network-manageable chassis


Datasheet

Typical Application

Dual-slot-width service modules working and managed in RC001-2M (02/2008)RC8xx series PDH multiplexers

RCMS series Multi-service PDH multiplexers

RC9xx series Ethernet over PDH(E1s) inverse multiplexers

One-slot-width service modules working and managed in RC001-2M (02/2008)

RC1xx~RC6xx series media converters

RC8xx series PDH modem and multiplexers

RCMS series Multi-service PDH multiplexers

RC9xx series Ethernet over E1(s), Ethernet over DS3/E3, Ethernet over V.35, V.35 to E1 interfaceconverters and inverse multiplexers

OPCOM200 series CWDM modular equipments

RC1102 series G.SHDSL modems

Warning: The total power consumption of the 2 one-slot-width service modules working in

RC001-2M must not exceed 12W.

Preliminary




www.sis-group.com


6/11

RC002-16 16-slot Chassis with SNMP Management


RC002-16

Slot Number Up to 16 slots for modular converters

Redundant Power

Supply

Two rear-loading, redundant, load-sharing, hot-swappable AC or DC or one

AC and one DC power supplies

Hot-wappable

power supply

RC002-16 can operate with single or dual AC or DC power supplies.

Each power supply supports a full rack of any combination of cards.

The redundant power supply can be replaced without affecting system

performance

Flexibility Single chassis for various modular converters with a variety of technologies,

rates, interfaces and media

Hot-swappable

modular converters

All cards are hot-swappable and can be replaced without interfering with the

data transmission of other cards

Safety Compliance CE and UL

Effcient Heat

dissipation

Optimal structure for effcient heat dissipation

Network

Management

The chassis can be managed by Raisecom network management platform

Nview iEMS (graphic format), which allowing confguration management,

diagnostics and loop activation, as well as monitoring and fault management

Real-time

confguration and

monitoring

The management software enables the user to change the setup

confguration, get real-time alerts on system status, activate diagnostics, and

receive statistics on system functionality in a graphic format.

Number of slot 16

Power supply Two hot-swappable AC or DC

power supplies

Input power

supply voltage

AC: 185V-265V, 50/60Hz

DC: -36V- -72V

Rated Current 20A

Short CurrentProtection

Yes

Over Current

Protection

30A

Noise 100mVp-p

Port

specifcation

(For NMS1

network

management

card)

CONSOLE: RJ-45

ETH (for SNMP and Telnet):

RJ-45

Cascading port: RJ45

Indicators PWR: for power supply

PS1-5: PS1 for modulesPS1-12: PS1 for 1st fan

PS2-5: PS2 for modules

PS2-12: PS2 for 2nd fan

Dimension 442x130.5x350mm (WxHxD)

Power

consumption

80W (at max load)

Working

ambience

Temp: 0~50 degree Celsius

RH: 5~90% non-condensing

Storage

ambience

Temp: -40~85 degree Celsius


Safety

compliance

CE marking

UL

RC002-16 is a 19" rack-mountable 3U platform

which supports two rear-loading, redundant,

load-sharing, hot-swappable AC or DC power

supplies. Up to 16 modular converters can be

installed in the chassis, providing a CO/POP

site solution for connecting up to 16 remote

users (15 with SNMP function).

RC002-16 is manageable access system for

providing full convergence of the Last Mile

with a variety of technologies, rates, interfaces

and media. The system supports standard

technologies G.703/704, G.SHDSL and

IEEE802.3. Each card in the RC002-16 works in

a point-to-point confguration opposite a remote

unit with no connection to the adjacent cards.

This allows each card to support a different

rate, interface or media.All cards are hot-wappable and can be replaced

without interfering with the data transmission of

other cards.

RC002-16 supports SNMP management with

NMS1 card inserted. The network management

software iEMS enables the user to change

the setup confguration, get real-time alerts on

system status, active diagnostics, and receive

statistics on system functionality in a graphic

format.

Specifcation

Feature

Ordering InformationRC001-NMS1 Network management master module for RC series modules, installed into

3U 16-slot chassis

RC001-NMS2 Network management slave module for RC series modules, installed into 3U

16-slot chassis

RC002-16AC/S 3U, 16-slot chassis with one AC power supply connector

RC002-16AC/D 3U, 16-slot chassis with two AC power supply connector

RC002-16DC/S 3U, 16-slot chassis with one DC power supply connector

RC002-16DC/D 3U, 16-slot chassis with two DC power supply connector

RC009-2AC Redundant AC power supply for RC002-16

RC009-2DC Redundant DC power supply for RC002-16

Mount Angle 21 Accessory for installing RC002-16 on 21" rack, two angles for one chassis

Mount Angle 23 Accessory for installing RC002-16 on 23" rack, two angles for one chassisNote: The RC002-16 chassis can be installed on 19" rack directly without any accessory.

Datasheet

RC001-NMS1




www.sis-group.com


7/11


RC002 Cascade

With management agent master

module RC001-NMS1 and

slave module RC001-NMS2

connecting in the manner shown

on the right, four RC002-16chassis forms a cascade.

At most sixty pairs of

equipments at both local and

remote sites can be managed

through one IP address which

is the IP address of RC001-

NMS1.

Typical Application




www.sis-group.com


8/11

RC004-16 Chassis for PDH FOM Modular Devices


RC004-16 16-slot Chassis

with SNMP Management

RC004-16 is a 19" rack mountable 10U

16-slot chassis for Raisecom modular type

Fiber Optical Modem (4E1, 8E1, 16E1and 8E1+4ETH) and it has rear-loading,

redundant, load-sharing,hot-swappable AC or

DC power supply. Each card in the RC004-16

works in a point-to-point mode with a remote

unit and so as to provide a CO/POP site

solution for Fiber Optical Modem users. All

cards are hot-swappable and can be replaced

without interferring with the data transmission

of other cards. RC004-16 supports SNMP

network management with RC004-16NMS1

card inserted in slot 0, and along with theRC004-16NMS2 card cascade can be realized

up to 4 RC004-16 chassis. The network

management software NNM enables users to

change the setup confguration, get real-time

alerts on system status, active diagnostics,

and receive statistics on system functionality

in a graphic format.

Feature

Datasheet

Slot Number Up 16 slots for modular converters

Redundant Power

Supply

Two rear-loading, redundant, load-sharing, hot-swappable AC or DC or one

AC and one DC power supplies

Hot-wappable

power supply




performance

Flexibility Single chassis for various modular converters with a variety of technologies,

rates, interfaces and media

Hot-swappable

modular converters



High Reliability NEBS Compliant


Effcient Heat

dissipation


Power supply Two hot-swappable AC or DC

power supplies

Input power

supply voltage

AC: 185V-265V, 50/60Hz

DC: -36V- -72VShort Current

Protection

Yes

Dimension 436(W)*440(H)*360(D)mm

Power

consumption

150W (at max load)

Working

ambience

Temp: 0~50 centigrade


Storage

ambience

Temp: -40~85 centigrade


Specifcation

Compliance

Standard UL

Ordering InformationRC004-16NMS1 Master agent module for network management, installed in slot 0 of

RC004-16 chassis

RC004-16NMS2 Cascade module for network management, installed in slot 0 of RC004-16

chassis

RC004-16AC 10U, 16-slot chassis with one AC power supply

(can provide redundant power supply)

RC004-16DC 10U, 16-slot chassis with one DC power supply

(can provide redundant power supply)

RC007-2AC Redundant power supply for RC004-16 chassis, ACRC007-2DC Redundant power supply for RC004-16 chassis, DC

Mount Angle 19

Center

Accessory for installing RC004-16 chassis on 19" center mounted rack

Note: RC004-16 chassis can be directly installed on normal front mounted

19" rack and need no additioinal mount angle.

Mount Angle 21

Center

Accessory for installing RC004-16 chassis on 21" center mounted rack

RC004-16NMS1

Management Agent Module

RC004-16NMS2

Management Cascade

Module




www.sis-group.com


9/11

RC006-1 Series single-slot chassis


Construction Single-slot, 19 inch, 1Unit highPower Supply Single AC, or single DC, or AC/DC redundant power supplies

RC006-1 non-management chassis

RC006-1M SNMP interface for management, Console interface for SNMP initial

confguration.

In support of management over service modules in the chassis and

remote devices

In support of online upgrade

Features

Ordering InformationRC006-1-X single-slot chassis for modules in RC006-12

RC006-1M-X single-slot chassis for modules in RC006-12, SNMP managementXindicates the optical port specifcation:

AC: 220V/230VAC power supply;

DC: -48VDC power supply;

AC/DC: AC and DC redundant power supply

Raisecom modem pool RC006-12 could

feed high speed and legacy data service,

leased line service and backhauling of mobile

BTS and connectivity WiMAX CPE of MetroEthernet simultaneously. It could hybrid support

for multiple levels PDH products including

E1 extension PDH fber optical multiplexer,

PCM multiplexer, Ethernet over PDH Inverse

Multiplexer. All of the module in central offce

Datasheet

RC006-1, RC006-1M

modem pool RC006-12 could be deployed in

remote site with single-slot chassis RC006-1

as well to enable customer to save cost for

inventory. Raisecom also offers the single-slotchassis with SNMP & console ports RC006-1M

for single module application in central offce.

SpecifcationConsole port RS-232 standard

RJ-45

9600bps

SNMP port 10/100Mbps

FDX/HDX

Auto-negotiation

IEEE802.3x fow control

Auto-MDI/MDIX

Dimensions 430(W)*44.45(H)*266mm(D)

Power Supply 180VAC~260VAC

-36VDC~-72VDC

+12VDC~+36VDCPower

Consumption


10/11

RC006-12 12 service slots multi-service modem pool


RC006-12 12 service slots

multi-service modem pool

Slot Number 15 slots, 12 slots for service cards, 2 slots for power supply modules and 1

slot for network management card

Redundant Power

Supply

Two front-loading, redundant, load-sharing, hot-swappable dual AC or dual

DC or one AC and one DC power supply

Hot-wappable

power supply




performanceFlexibility Single chassis for various modular cards with a variety of technologies,

rates, interfaces and media, unifed SNMP management for all the modules

Hot-swappable

modular converters




Effcient Heat

dissipation


Network

Management

The chassis can be managed by Raisecom network management platform

Nview iEMS (GUI), which allowing confguration management, diagnostics

and loop activation, as well as monitoring and fault management

Real-time

confguration andmonitoring

The management software enables the user to change the setup

confguration, get real-time alerts on system status, activate diagnostics, andreceive statistics on system functionality in a graphic format.

Number of slot 15

12 slots for service cards

2 slots for power supply

modules

1 slot for network

management card

Power supply Two hot-swappable AC or DCpower supplies

Input power

supply voltage

AC: 85V-265V, 50/60Hz

DC: -36V- -72V

Rated Current 20A

Short Current

Protection

Yes

Over Current

Protection

Yes

Noise 100mVp-p

Port

specifcation

(For NMS1network

management

card)

CONSOLE: RJ-45

ETH (for SNMP and Telnet):

RJ-45

Net Weight 4.6kg (with two power

supplies)

Dimension 442(W)*248(H)*267(D)mm

Power

consumption

300W (at max load)

Working

ambience



Storage

ambience



RC006-12 is a ETSI complied 19" rack-

mountable 6U high platform which supports

two front-loading, redundant, load-sharing,

hot-swappable AC or DC power supplies. Up

to 12 modular service cards and one network

management card can be installed in the

chassis, providing a CO/POP site solution for

connecting up to 12 remote CPE.

RC006-12 multi-service modem pool feeds

simultaneously high speed and legacy data

service, analog voice service, leased line

service and backhauling of Mobile BTS and

connectivity WiMAX CPE to Metro Ethernet.

It could hybrid support for multiple level PDH

products such as: cost effective E1 extension

PDH product up to 16E1; PCM multiplexer

s analog voice and legacy data service for

enterprise customers; carrier grade multi-service PDH product with up to 16 E1s

(including 1*V.35) and 1*10/100M Ethernet

interface.

Redundant fber optic links and power supply

could guarantee the maximum networking

uptime. Switching over time from primary

fber link to secondary is less than 50ms. This

platform could supply SNMP management,

TELNET, and local craft terminal management

through RS232 interface. Full range of

management makes carrier to easily operate

and monitor local and remote device anywhere.

SpecifcationFeature

Ordering InformationRC006-12-NMS Network management module for RC006-12 chassis

RC006-12AC/S 6U, 12 service slots chassis with one 115V or 230V AC power supply

RC006-12AC/D 6U, 12 service slots chassis with two 115V or 230V AC power supplies

RC006-12DC/S 6U, 12 service slots chassis with one -48V DC power supply

RC006-12DC/D 6U, 12 service slots chassis with two -48V DC power supplies




www.sis-group.com


11/11


Typical Applicatioin

Bossestasse 9,06484 Quedlinburg Deutschland

Andreas GeroldTel.: + 49(0) 3946 - 91 99 90Fax: + 49(0) 3946 - 91 99 91Mobil: + 49(0) 171 - 74 262 76E mail: andreas gerold@gersis eu

Michael LitvinkoTel.: + 375 17 259 11 03Fax: + 375 17 259 11 18Mobil: + 375 297 600 103E mail: mikhail litvinko@gersis eu

chassis ds gersis

Documents