columbus mckinnon catalogue 2012

u Yale Industrial Productsu Pfaff-silberblauu Camlok Lifting Clampsu Steerman Load Moving Systems

All of your material handling solutions under one name.

C O R P O R A T I O N

UK Price List - 2012

STORAGE DESIGN LIMITED - Columbus McKinnon Catalogue 2012

STORAGE DESIGN LIMITED TEL:01446 772614 [email protected] www.storage-design.co.uk

CONTENTS PAGE (detailed index on page 230)

YaleIndustrial Products

®

CamlokLifting Clamps

OriginalSpare Parts



• Pul-lifts® & ratchet lever hoists 10 - 11• Manual chain hoists 12 - 15• Corrosion & spark resistant hoists 15 - 17• American manual hoists 18 - 19• Manual trolleys 20• Cable grips & load binders 21• Yaletrac® cable pullers 22 - 23• Spring balancers 24 - 25• Powered wire rope winches 26 - 27

• Manual wire rope winches 69 - 75• Electric wire rope winches 76• Hand operated gearboxes 77• Sheaves & sheave blocks 77 - 79• Winch technical specification 80 - 81• Standard hand pallet trucks 82 - 83• Non-standard hand pallet trucks 84 - 85• Electric pallet trucks 86 - 87

• Vertical plate clamps 100 - 103• Horizontal plate clamps 104 - 106• Wide jaw clamps 107• Non-marking plate clamps 108 - 109• Beam clamps 110 - 111• Girder clamps 112 - 113• Rail handling clamps 114 - 115• Permanent lifting magnets 116• Manual lifting / magnetic claws 117

• ‘Original’ Steerman skates 136 - 137• Budget nylon wheeled skates 138• Caterpillar skates 138• Roller pinch bars 138• Fixed / steerable skate units 139• Hydraulic toe jacks 140• Fork lift truck jacks 140• Bottle jacks 141

• C/D85 Pul-lifts® 144 - 147• AL ratchet lever hoists 148 - 149• Handy ratchet lever hoists 150 - 151• PT ratchet lever hoists 152 - 155• UNO & UNOplus lever hoists 156 - 163• Yaletrac® cable pullers 164 - 169• Yalelift hand chain hoists 170 - 185• VS & VSplus chain hoists 186 - 196• TPM permanent lifting magnets 197

• Pneumatic chain hoists 28 - 29• Powered hoists & trolleys 30 - 37• Jib cranes 38 - 39• Endless winches 40 - 41• Wire rope hoists 42 - 43• Crane weighers & load cells 44 - 47• Height safety equipment 48 - 56• Textile products 57 - 59• Hydraulic cylinders & pumps 60 - 68

• High lift pallet trucks 88• Pedestrian stacker trucks 89 - 90• Trolley lifts / scissor tables 90 - 91• Steel jacks 92 - 93• Wall mounted jacks 94 - 95• Sluice gate jacks 96• Safety ratchet cranks 97• Screw jacks & actuators 98 - 99

• Groundworks 118 - 119• Screw clamps / crane forks 120 - 121• Drum handling clamps 122 - 123• Round stock & block grabs 124 - 125• Coil handling clamps 126 - 127• Container lifting lugs 128• Paper handling 129• Bag lifters / fork truck tine hooks 130• Safety cages / shearlegs / specials 131 - 135

• Aluminium jacks 141• Engine cranes 142

• CPV/F electric chain hoists 198 - 201• Lodestar electric hoists 202 - 205• CPS electric chain hoists 206 - 207• Steerman SX skates 208 - 217• 92, CZ, CY & CX clamps 218 - 221• Pfaff hand pallet truck 222 - 223• Silverline chain and lever hoists 224 - 227• LB wire rope winch 228• Load and hand chain 229



4

DISTRIBUTOR NETWORK

QUALITY POLICY STATEMENTColumbus McKinnon Corporation is committed to provide a standardof service that fully meets our distributors needs. We recognise theimportance of adopting and maintaining an internationally recognisedstandard of quality assurance. Using ISO 9001:2008 accreditation as thebase on which we build sustained improvement for all of our activities.

Resources have been provided to ensure that all contractual and statutoryneeds are met and that all staff are trained and aware of the CMCOphilosophy of improvement through commitment, assessment, andre-evaluation.

PRODUCT DOCUMENTATIONAll Columbus McKinnon products are supplied with comprehensive operatinginstructions. Also included is an EC Declaration of Conformity which confirms thetested status of the product.

Additional documentation such as spare parts manuals or maintenance and repairinstructions, technical drawings etc. are available on request.

Duplicate copies of the operating manuals and spare parts lists are available todownload from our websites.

Lifting EquipmentEngineers Association FM20103 003

��

Hereby we declare, that the construction and commercialised execution of the below Lifting Equipment complies

with the essential health and safety requirements of the EC Machinery Directive. The validity of this declaration will

cease in case of any modification not being agreed with us previously.

Furthermore, validity of this declaration will cease in case that the machine will not be operated correctly and in

accordance to the operating instructions and/or not be inspected regularly.Certificate No.:

00001397

Works Order No.:UVA00971

Product:

Push Travel Beam Trolley

Model:

HTP ’A’

WLL (kgs):

250Proof Load Factor (%):

150

Serial No.:

17035Relevant EC Directives:EC Machinery Directive 98/37/EC

Machinery Directive transposed standards:EN 292, part 1EN 292, part 2EN 349EN 13157

Transposed (either completeor in extracts) nationalstandards and technicalspecifications in particular:

9. GSGV, VBG 9.aBGV D8, BGV D6,DIN 15018, DIN 15070, DIN 15085

Quality Assurance: EN ISO 9001:2000

Name and address of manufacturer:

Yale Industrial ProductsA trading division of Columbus McKinnon Corporation Limited

Knutsford WaySealand Industrial EstateChesterCH1 4NZ

Signature: Identification of the signee:

Nigel Hancocks - Quality Assurance Manager

Date:

30.04.09PDF_02_MANUAL BEAM TROLLEY

Electric Chain Hoist

Model CPV/FCapacity 125kgs - 2000kgs

OPERATING,MAINTENANCE,SPARE PARTS ANDWIRING DIAGRAMS

Yale�&�,*+)#�$��)'�,�+*

0

Mod. VS

Betriebsanleitung

Operating Instructions

Mode d’emploi

Instrucciones de Servicio

Gebruiksaanwijzing

D

GB

F

E

NL

Yale Industrial

Products GmbH

VERTICAL PLATE CLAMPSOPERATING INSTRUCTIONS

CONTENTS

1 .2 Overview.3 Load Diagrams.4 5 Fitting Instructions.6 Lifting Instructions.7 Transporting.8 Lowering.9 Release.10 Care and Maintenance.11 Effects of Wear.12 Wear Width.13 Curved Plate.

Safety

Operating Environment.

PAGE

2233334444555

Do not

Always

Do not

must not

Always

There is a serious risk of personal injury if you do not follow the instructions as detailed

in this booklet.

use this equipment until you have read and fully understood these instructions.

This equipment has been designed for use by a competent person who has read and

understood the instructions.

wear practical, protective clothing, gloves and footwear as a minimum.

operate this equipment if you feel ill, tired or are under the influence of alcohol

or drugs.

This equipment be used to carry or lift personnel.

bear in mind your safety and the safety of others while using this equipment.

1. SAFETY

CZ

92

92 500

ENG

LISH

NOTE: These operating instructions should be read in conjunction with and in addition to

all relative safety standards in force in the country of use.

Designed to lift mild steel plates.

Used to lift loads between the minimum and maximum working

load limit (W.L.L) as marked on each clamp.

Used on all hot rolled structural mild steel plates up to

a surface hardness of 300 Brinell / 32 Rockwell C .

Lifts plate from the horizontal to the vertical position and

vice versa through 180 degrees.

Fitted with hold-open and lock-closed device (except model 92 500).

2. OVERVIEW

Mod.

BetriebsanleitungOperating InstructionsMode d’emploiInstrucciones de ServicioGebruiksaanwijzing

D

GB

F

E

NL

Yale IndustrialProducts GmbH

‘100% Distributor sales policy’

As a distributor of Columbus McKinnon Corporation (CMCO) branded hoists and lifting

equipment, you have a great opportunity to add further income and profit to your bottom

line, from dealing with one of the world’s leading and most respected suppliers. With

a rich 135-year tradition, the company focuses on commercial and industrial

applications that require the safety and quality provided by its superior design and

know-how.

We operate a 100% distributor sales policy here, on mainland UK – your only

competitors are our competitors, and all enquiries go straight to our distributors. So

the way is clear for you to make the most from the products we have to offer.

CMCO includes brands with a reputation for performance and quality engineering

going back more than a century:

• Yale hoists and lifting equipment – the number one choice in the US and

a brand with instant global recognition.

• Pfaff-silberblau – German engineering quality made here in the UK.

• Camlok – still the market leader in clamps and accessories.

From our UK facilities in Chester, Prenton and Northern Ireland we back distributors

with a total support package of marketing, promotion and training materials, parts, service and technical support. Everything you need and expect

from a global force in the industry to help you make more profit.

You can market CMCO products wherever you wish, to any potential user – in sectors such as warehousing, manufacturing, metal stockholding,

distribution, construction, ports and docks, airports, railway engineering, electrical and electronics, entertainment, sports – even the theatre.

In today’s tough economic climate it makes sense to explore every avenue to boost turnover and profits, and if you’re not a CMCO distributor

already, we’d be happy visit you to discuss how becoming one could help you achieve your commercial ambitions.



TRAINING SCHOOL

“Centre of Excellence!”

As part of Columbus McKinnon Corporation’s (CMCO) distributor support programme, the

company is opening a new lifting equipment Training Centre in Prenton, on Merseyside.

The school will provide a variety of courses to help employers and users operate hoists,

clamps and other equipment safely and efficiently.

The curriculum will include subjects such as Hoist maintenance and fault finding, inspection

and safe use of Height Safety equipment and where and how to use Plate Lifting Clamps.

Experienced CMCO training staff have the unrivalled support and expertise of one of the

world’s leading designers and manufacturers of lifting equipment, ensuring practical and

thorough training in line with current legislation.

As well as providing an additional service for users and distributor staff, the centre will be

available for companies who wish to run their own specific safety and lifting operation

courses.

Examples of training courses available:

• Lodestar training schools. • Repair & maintenance of electric chain hoists.• Safe use of lifting clamps. • Inspection & repair of manual chain hoists.• Entertainment motor school. • Height safety equipment product awareness.


Certificateof attendanceAwarded to

Steve Smith

of

A. Lifting Companyin recognition of the successful completion of the

Camlok Lifting Clamps maintenance course.

Certificateof attendance

Signed:.............................................................. Date:.................................................................Camlok Lifting Clamps Knutsford Way, Sealand Industrial EstateChester. CH1 4NZTel: 01244 375375 Fax: 01244 377403

®

5

RETURNS POLICY / WARRANTY

“Goods Return Policy”

We would like to draw your attention to Columbus McKinnon Corporation Limited’s policy on the returning of goods, either when:-

a. Incorrect goods ordered by distributor or end user.

b. Goods despatched but later cancelled or unwanted by distributor or end user.

On either of the above occasions, unless otherwise confirmed in writing to the contrary, the Company will levy a standard handling charge. This

handling charge is to cover administration costs, Q.A. inspection or returned goods and operational expenses of goods to be returned to stores.

The handling charge is 15% on ‘standard products’ on the net value minus any carriage costs. For ‘non standard’ products the handling charge is

25% although items that have been manufactured to a customers special requirement CANNOT be returned for credit.

“Returns Authorisation Request”

Before any goods are returned the distributor must contact a member of the sales team to gain a valid‘Returns Authorisation Request’ form (RAR). Any goods that arrive without an RAR number will not be

accepted for a credit and may be refused by Goods Inwards.

Upon the accepted return of the goods, each item will be inspected and if, after inspection, it is noted that

refurbishment is required before it can be returned to general stock the company will charge the distributor

for this refurbishment. This work will be done at our standard repair charge rate and we will inform the

distributor of the faults or damage noted and the work required to re-instate the item to a saleable

condition.

All returned goods are to be returned by the distributor at their cost with either a copy of the RAR form or

the RAR number clearly marked on the goods.

“Warranty Claims”

All equipment complies with the high standards of quality established by the Company both in respect of

materials and workmanship and as the sole and exclusive remedy in discharge of this warranty the Company undertakes to

replace free of charge within 360 days from date of despatch from its works any components of its manufacture, which are proved to the satisfaction

of the Company (whose decision shall be final and binding) to be defective in materials and workmanship provided notice in writing to the Company

is given within 10 days of the defect occurring and provided the component which is the subject of the complaint, if the Company so requests

returned pre-paid to the Company's works at Chester. In the case of defective components or parts not of the Company's manufacture the

Company's liability shall be limited to such adjustment or allowance as the manufacturer there of shall make.

The Company shall not accept responsibility for such work done or expense incurred by the buyer in connection with any repair or replacement

unless the Company's prior written authorisation has been obtained. This warranty is in lieu of and excludes all other conditions and warranties

whatsoever whether expressed or implied and whether under common law, statute law or otherwise and apart from aforesaid the Company hereby

expressly excludes all liability for any loss or damage whatsoever arising and howsoever caused. The buyer warrants that it will pass on, to all third

parties to whom it may supply the goods, all information as to the use and safe handling of the goods, as may have been passed onto the buyer

by the Company.

RETURNS AUTHORISATION REQUEST FORM

Form No.37

Issue: 7

Date: July 2008

WHITE: CUSTOMER. YELLOW: OFFICE. PINK: WAREHOUSE.

RAR:

Columbus McKinnon Corporation Limited - Knutsford Way, Sealand Industrial Estate, Chester CH1 4NZ

Tel: 01244 375375 Fax: 01244 377403 Email: [email protected] Web: www.cmworks.com

DISTRIBUTOR:

ACCOUNT CODE:

CONTACT:

CUSTOMER ORDER NUMBER:

TELEPHONE:

DATE GOODS RECIEVED:

FAX:

WORKS ORDER NUMBER:

REASONS FOR RETURN:

ACTION TO BE TAKEN:

DESCRIPTION OF GOODS:

APPROVED FOR RETURN BY:

WARRANTY REFERENCE:

CARRIER REFRENCE:

DATE RAR RAISED:

SERVICE/REPAIR REFERENCE:



6

MARKETING SUPPORTContinuing our commitment to our distribution partners, we have developedmany product / industry specific brochures, product charts, safety posters,flyers, interactive CD’s, DVD’s, videos, and websites.

Please contact our marketing department for all literature, posters, images,videos, photographs, web site advice, CDs, fonts, or logos.

We are happy to release the copyright of all our images for use on distributorsweb sites or in their own brochures providing that prior written consent isobtained Columbus McKinnon Corporation Limited.

GROUP WEB SITES:www.cmworks.comwww.cmco.eu

BRAND SPECIFIC WEB SITES:www.camlok.co.ukwww.steerman.co.ukwww.yaleproducts.comwww.pfaff-silberblau.co.ukwww.cmworks.eu

Price List 2011

�� Yale Industrial Products�� Pfaff-silberblau�� Camlok Lifting Clamps�� Steerman Load Moving

��

QR CODES NEW

In this issue of the CMCO price list you will notice QR codes dotted about on various pages.

A QR code (abbreviated from Quick Response code) is a type of matrix barcode (or two-dimensionalcode) first designed for the automotive industry. More recently, the system has become popular out-side of industry due to its fast readability and comparatively large storage capacity. The code con-sists of black modules arranged in a square pattern on a white background.

If you have a ‘smart phone’ you can use the app called ‘QR Reader’ and simply scan code inseconds. Our codes contain information such as spare parts lists, operating manuals, and morein-depth product sales literature.

As technology develops it is predicted that more andmore information will be contained within QR codesand our future plans are to include the QR codes onour actual products.

Watch this space!

�� "��!��)�$��$"#��"�%&� "��#��&��%��%

The Yale Global King wire rope hoists are builtfor the world market and combine over 130yrsof experience with the latest manufacturing andmaterials technology, design standards, and thebest quality components available.All Yale Global King hoists are built to meet and exceedFEM 2m duty rating, providing long life in heavy applications.The range extends from 1.6t to 15t as standard and comescomplete with a range of speed options to suit mostapplications.

The Yale Global King is CE certified and each unit is testedto 125% of the normal working load, prior to despatch.Stocked at our German manufacturing facility, these units are

readily available. Please call our sales team on 01244 375375

for further details.

"�%&� "&"$��$��• High motor rating and duty cycles. • Protected to IP55, insulation class F• Motor located outside the rope drum, allowing cooling and serviceability.• Motor temperature control as standard.• Low maintenance brake, no adjustment necessary, protected to IP65.

�$��&�"!��$�(�• Ideal handling characteristics, as two wheels are driven, one on each side of the frame. Trolley wheels mounted on lubricated, encapsulated ball bearings.• The cambered profile is suitable for parallel and inclined beam profiles.• Worm gear drive for smooth starting and stopping at two speeds.• Extremely low headroom.

�"#��'��• Enclosed low wear rope guide made from reinforced polyamide.• The rope guide ensures correct alignment and tensioning of the rope through 3600 in order to avoid slack rope and subsequent damage to the rope.

�"#��$�(��"&&" ��"��• Optimised proportion of drum and wheel diameter for low wear and tear of the rope.• Flexible and long-life steel rope.• Easily accessible drum for quick rope exchange.• Robust bottom block made of glass reinforced polyamide.• Rotating and tiltable load hook trunnion style for easier load adjustment and positioning.

�"#��*�&�"!��!��$"#��!��• The rope can be exchanged and maintained quickly due to three screwed rope clamps and an asymmetrical wedge socket. The open design allows easy maintenance.

��$�� &�%)�&��%• The geared limit switch for the upper and lower hook position is conveniently located to allow ease of access, even when the hoist is installed and is protected by an aluminium gear case.

��'%& �!&�&"�� !��• Simple adjustment of the trolley to a wide range of beam flange widths by threaded spindle. �(�$�"��#$"&��&�"!��(��• The overload protection device prevents

lifting excessive load.

��$��$"#��"�%&��&'$�%�

�

��

Product Manual

*

�� Yale Industrial Products�� Pfaff-silberblau�� Camlok Lifting Clamps�� Steerman Load Moving

��



7

THE BRANDS

Yale Industrial ProductsInstantly recognisable, the Yale name is synonymouswith quality hoisting equipment and has been

since 1877 when Linus Yale, Jr.produced the first spur gearedhand chain hoist with theWeston Screw Brake.

Now, 130 years on we still lead the industry with new andinnovative products, like therevolutionary Yalelift 3600 hand chain hoist.

Our reputation has been built in close associationwith our distribution network. Supplying industrywith a range of lifting equipment which is secondto none.

“Britain’s No. 1 Name for Lifting!”

COLUMBUS McKINNON Corporation Limited

CamlokCamlok Lifting ClampsWith 50 years experience indesign, manufacture and

supply of below the hook lifting clamps,the name Camlok is known and trustedthroughout the world.

As the UK’s largest manufacturer ofclamps and grabs, Camlok pridethemselves on their extensive standardproduct range and their ability to offerbespoke solutions to most lifting applications.

Camlok’s top priority has always been safety, and as such offer professionaltraining sessions for authorised distributors and their customers.

“Lifting safety to new heights!”

Pfaff-silberblauEstablished in 1867,Pfaff-silberblau is the

leading manufacturer ofelectric and manual winchesin Europe. Available incapacities from 125kg upto 7500kg and with over 1000variations the Pfaff range of winches is second to none.

Pfaff also offer a comprehensive range of manual andelectric hand pallet trucks, pedestrian manual and poweredstacker trucks, and manual and electric scissor tables.

“Movability is a question of creative technology”

Steerman Load Moving SystemsA worldwide supplier of load moving equipment,with outlets throughout Europe, Africa, Asia andNorth America, Steerman is the natural choice of theprofessional load movers.

These systems have been developed overa number of years to ensure total ease ofoperation.

Steerman load moving skates compriseof a steerable front section and a pairof adjustable rear trolleys. Theseinnovative systems are availablein capacities ranging from 10 to100 tonnes and can easily bestripped down to component parts for easy transportation.

“Moving loads the professional way!”

Steerman

Duff-NortonMechanical ActuatorsEstablished in 1883, Duff-Nortonare now the largest manufacturerof mechanical actuators in theworld.

We have earned a reputation forreliable, high quality products thatmeet the industrial positioning and transfer needs of our global customerbase. Both our standard and custom engineered products aresubjected to the same rigorous testing through the design process.

“Positioning and process solutions!”



8

CONTENTS PAGE (detailed index on page 230)

YaleIndustrial Products

®


OriginalSpare Parts



9

• Pul-lifts® & ratchet lever hoists 10 - 11• Manual chain hoists 12 - 15• Corrosion & spark resistant hoists 15 - 17• American manual hoists 18 - 19• Manual trolleys 20• Cable grips & load binders 21• Yaletrac® cable pullers 22 - 23• Spring balancers 24 - 25• Powered wire rope winches 26 - 27

• Manual wire rope winches 69 - 75• Electric wire rope winches 76• Hand operated gearboxes 77• Sheaves & sheave blocks 77 - 79• Winch technical specification 80 - 81• Standard hand pallet trucks 82 - 83• Non-standard hand pallet trucks 84 - 85• Electric pallet trucks 86 - 87

• Vertical plate clamps 100 - 103• Horizontal plate clamps 104 - 106• Wide jaw clamps 107• Non-marking plate clamps 108 - 109• Beam clamps 110 - 111• Girder clamps 112 - 113• Rail handling clamps 114 - 115• Permanent lifting magnets 116• Manual lifting / magnetic claws 117

• ‘Original’ Steerman skates 136 - 137• Budget nylon wheeled skates 138• Caterpillar skates 138• Roller pinch bars 138• Fixed / steerable skate units 139• Hydraulic toe jacks 140• Fork lift truck jacks 140• Bottle jacks 141

• C/D85 Pul-lifts® 144 - 147• AL ratchet lever hoists 148 - 149• Handy ratchet lever hoists 150 - 151• PT ratchet lever hoists 152 - 155• UNO & UNOplus lever hoists 156 - 163• Yaletrac® cable pullers 164 - 169• Yalelift hand chain hoists 170 - 185• VS & VSplus chain hoists 186 - 196• TPM permanent lifting magnets 197

• Pneumatic chain hoists 28 - 29• Powered hoists & trolleys 30 - 37• Jib cranes 38 - 39• Endless winches 40 - 41• Wire rope hoists 42 - 43• Crane weighers & load cells 44 - 47• Height safety equipment 48 - 56• Textile products 57 - 59• Hydraulic cylinders & pumps 60 - 68

• High lift pallet trucks 88• Pedestrian stacker trucks 89 - 90• Trolley lifts / scissor tables 90 - 91• Steel jacks 92 - 93• Wall mounted jacks 94 - 95• Sluice gate jacks 96• Safety ratchet cranks 97• Screw jacks & actuators 98 - 99

• Groundworks 118 - 119• Screw clamps / crane forks 120 - 121• Drum handling clamps 122 - 123• Round stock & block grabs 124 - 125• Coil handling clamps 126 - 127• Container lifting lugs 128• Paper handling 129• Bag lifters / fork truck tine hooks 130• Safety cages / shearlegs / specials 131 - 135

• Aluminium jacks 141• Engine cranes 142

• CPV/F electric chain hoists 198 - 201• Lodestar electric hoists 202 - 205• CPS electric chain hoists 206 - 207• Steerman SX skates 208 - 217• 92, CZ, CY & CX clamps 218 - 221• Pfaff hand pallet truck 222 - 223• Silverline chain and lever hoists 224 - 227• LB wire rope winch 228• Load and hand chain 229



D85 PUL-LIFTS®

WITH ZINC PLATED LINK CHAIN

750 01541291 1 6 x 18.5 1.5 322 8.2 £287 £11

1500 01541292 1 9 x 27 1.5 389 16.3 £412 £16

3000 01541293 1 11 x 31 1.5 403 19.6 £500 £23

6000 01541294 2 11 x 31 1.5 532 32.9 £696 £46

10000 01541511 3 11 x 31 1.5 805 60.0 £2238 £69

Capacity Article Falls of Chain Lifting Closed Weight Price Additional

(SWL) number load chain dimensions height height @ std. HOL lifting height

kgs mm mtrs mm kgs £ £/m

750 01141295 1 5/8” x 3/8” 1.5 322 8.7 £344 £21

1500 01141296 1 1” x 1/2” 1.5 389 17.0 £498 £30

3000 01141297 1 1 1/4” x 5/8” 1.5 403 22.2 £606 £55

6000 01141298 2 1 1/4” x 5/8” 1.5 560 38.0 £925 £110

10000 01141513 3 1 1/4” x 5/8” 1.5 785 67.0 £2635 £165

Capacity Article Falls of Chain Lifting Closed Weight Price Additional

(SWL) number load chain dimensions height height @ std. HOL lifting height

kgs inch mtrs mm kgs £ £/m

The C85 Pul-lift® is ideal for use in the electricity supply industry and in overhead line work. It is essentially thesame as the D85 Pul-lift®, but instead of link chain it comes fitted with roller chain. The roller chain sprocketis made from heat treated chromium-molybdenum steel with precision machined teeth to ensure smooth chainmovement. All models can be optionally equipped with an overload protection device in the form of a slipping clutch,which is factory pre-set. A free chaining device is also available as an optional extra. Please call the CMCO salesteam direct on 01244 375375 for more details.

Pul-lift

with

roller chain.*

•• Overload protection device is available on the 750 to 6000kg units. Please call the sales team for details.

• To date over 1 million of these units have been built by Yale.•• Overload protection device is available on the 750 to 6000kg units. Please call the Yale sales team for details.

The one and only original PUL-LIFT®

The D85 Pul-Lift® is the original ratchet lever hoist, the unit on which Yale was founded. There aremany cheap imitations on the market but the D85 is the ONLY ratchet lever hoist that can be calleda Pul-Lift®.

The enclosed housing cover, handlever, and lower block are made from high tensile white malleablecast iron, providing overall rugged construction. The graphite cast iron load sheave for the link chainhas precision machined chain pockets for accurate fit and durability of the load chain.

The Yale D85 Pul-lift® is the quality choice for the hire industry. It is designed for heavy duty workand is suitable for almost any application in maintenance, mining, construction, steel fabrication,shipbuilding, utility work, and especially in the rail industry.

The D85 is ideal for spotting and securing heavy loads, simplifying the setting of pipes etc. inmanholes and trenches. All models can be optionally equipped with an overload protection devicein the form of a slipping clutch, which is factory pre-set. A free chaining device is also available asan optional extra. Please call the Yale sales team on 01244 375375 for more details.

NB: Do NOT accept cheap imitations! The Yale D85is the original and only ratchet lever hoist that canbe called a Pul-Lift®.

Pul-Lift® is a registered trade mark of Yale Industrial Products.

Spare parts

for Pul-Lifts

are shownon pages144-147.

*

C85 PUL-LIFTS®

WITH ROLLER CHAIN

10

Option: Overloadprotection for C/D85



750 02041251 1 6.3 x 19.1 1.5 315 6.4 £299 £13 1000 02041252 1 6.3 x 19.1 1.5 325 6.6 £337 £13 1500 02041253 1 7.1 x 21.2 1.5 380 10.0 £423 £14 3000 02041254 1 10 x 30.2 1.5 455 18.0 £570 £19

Capacity Article Falls of Chain Lifting Closed Weight Price Additional (SWL) number load chain dimensions height height @ std. HOL lifting height kgs mm mm kgs £ £/m

The enclosed housing, handlever, and handwheel are made from high quality aluminium. Due to precise needlebearings, the hoist can be operated with little effort. Its low tare weight is an advantage when the hoist has to becarried over longer distances on different assignments. The chain guide is cast into the body to ensure faultlesschain movement. The standard free chaining device serves to quickly attach the load or to pull the chain throughthe hoist in both directions. This universal ratchet lever hoist is “a must” in any service vehicle.

800 02200005 1 5.6 x 17.1 1.5 290 5.5 £234 £310 £11

1600 02200006 1 7.1 x 21.2 1.5 330 9.6 £344 £449 £14

3200 02200007 1 9 x 27.2 1.5 430 16.0 £468 £589 £19

6300 02200008 2 9 x 27.2 1.5 580 31.0 £675 £765 £38

Capacity Article Falls of Chain Lifting Closed Weight @ Price Price c/w Additional (SWL) number load chain dimensions height height std. HOL std. Unit overload lifting height kgs mm mm kgs £ protection £ £/m

The PT is probably the most universal ratchet lever hoist in the Yale range. The pressed steel housing provides anextremely low weight. The standard free chaining device serves to quickly attach the load or to pull the chain throughthe hoist in both directions. Low operating effort and low overall height are further outstanding features. The PT reallyis a good, versatile, all round ratchet lever hoist suitable for almost all standard applications.

250* 02300018 1 4 x 12 1.5 240 2.2 £83 £9 500 02300070 1 4 x 12 1.5 282 2.8 £93 £9

Capacity Article Falls of Chain Lifting Closed Weight Price Additional (SWL) number load chain dimensions height height @ std. HOL lifting height kgs mm mm kgs £ £/m

This hoist is the smallest and lightest ratchet lever hoist in the Yale range. Due to the multitude of applicationpossibilities, e.g. industry, trade, and service. This ratchet lever hoist is indispensable. The extremely low tare weightand very compact design makes the hoist easy to use, even in very confined working conditions. The standard freechaining device serves to quickly attach the load or to pull the chain through the hoist in both directions.

*ONLY240mm

Low effort

required on

handlever.*

AL ‘ALUMINIUM’ RATCHET LEVER HOISTS

750 02300161 1 6 x 18 1.5 350 7.2 £127 £11 1500 02300162 1 8 x 24 1.5 420 12.5 £150 £14 3000 02300163 1 10 x 30 1.5 520 21.5 £229 £20 6000 02300164 2 10 x 30 1.5 700 32.0 £344 £40

Capacity Article Falls of Chain Lifting Closed Weight Price for Additional (SWL) number load chain dimensions height height @ std. HOL std. unit lift height kgs mm mtrs mm kgs £ £/m

The Yale UNOplus is a versatile ratchet lever hoist designed for pulling, lifting, and lashing of loads. Its featuresinclude a compact design, robust stamped steel construction, and a favourable price / efficiency ratio. The unit isalso very lightweight and comes complete with a free chaining device as standard that serves to quickly attach theload or to pull the chain through the hoist in both directions.

The UNOplus ratchet lever hoist can also be

supplied to ATEX APPROVED Spark Resistant

specification. See pages 16-17 for details.*

UNOplus ‘ECONOMY’ RATCHET LEVER HOISTS

HANDY ‘THE SMALLEST’ RATCHET LEVER HOISTS

PT ‘PRESSED STEEL’ RATCHET LEVER HOISTS

11

Spare parts for

AL lever hoists are on

pages 148-149.*

Spare parts for the Handy’s are on pages 150-151.*

PT spares are on

pages 152-155.*

UNO and UNOplus spares are on pages 156-163.*

Protection classification (on request)I M2, II 2 GD c IIB T4 T 120o C X



VSIII ‘MEDIUM DUTY’ HAND CHAIN HOISTS

Capacity Article Falls of Chain Lifting Closed Weight @ Standard Additional Chain containers (SWL) number load dimensions height height standard unit HOL chain HOL To suit hol Part no. Price kgs mm mtrs mm kgs Price £ £/m mtrs £

500 04200102 1 6 x 18 3 320 9.0 £124 £21 12 04109472 £60 1000 04200103 1 6 x 18 3 370 11.2 £146 £21 12 04109473 £68 2000 04200107 1 8 x 24 3 450 18.0 £217 £24 6 04109474 £81 2000 04200104 2 6 x 18 3 530 15.3 £208 £32 6 04109473 £68 3000 04200108 1 10 x 30 3 530 28.0 £298 £30 3 04109475 £98 3000 04200105 2 8 x 24 3 620 24.7 £285 £38 6 04109474 £81 5000 04200106 2 10 x 30 3 620 38.7 £417 £50 3 04109475 £98

VS and VSplus

spare parts are on

pages 186-196.*

12

Hand chain hoist, model VSIIICapacities: 500 - 5000kgs

The newly designed hand chain hoist VSIII is an innovative further development introduced byYale. The improved hand chain guide prevents tilting or jamming of the hand chain, leading toa smooth running of the chain.

High quality bearings on side plates, gearbox and load chain sheave ensure smooth operationof load chain and drive pinion. Optimised hand forces set standards for easy operation.

Features include:

• High quality bearings for gearbox, side plates and load chain sheave for long service life.• Zinc-plated brake parts and guide rollers ensure increased corrosion protection.• Load chain is zinc-plated as standard for added corrosion protection.

Load chain sheave with needlebearing

Side plate with ball bearing Housing cover with ball bearing

Model VSIII, 500 - 3000kgs, single fall. Model VSIII, 2000 - 5000kgs, double fall.

Technical specifications Model Capacity No. of falls Article number A B C D E F G H K kgs mm mm mm mm mm mm mm mm mm

VSIII 0.5/1 500 1 04200124 350 21 23 16 145 140 80 60 240 VSIII 1.0/1 1000 1 04200125 380 28 27 20 158 155 87 68 270 VSIII 2.0/1 2000 1 04200126 460 36 35 29 205 180 94 86 320 VSIII 2.0/2 2000 2 04200127 490 36 35 29 170 155 87 68 285 VSIII 3.0/1 3000 1 04200128 570 45 40 29 240 210 110 100 370 VSIII 3.0/2 3000 2 04200129 580 45 40 29 220 175 94 81 340 VSIII 5.0/2 5000 2 04200130 700 47 45 40 250 190 95 95 410



Revolutionary hand chain hoistA hand chain hoist which opens up huge new opportunities: With our innovative design thingsare really beginning to move. The Yalelift 3600 opens up a new world of safety for the operator.The range of applications as well as the operating conditions have been changed by arevolutionary hand chain design.

The key to this innovation is our revolutionary 3600 rotating hand chain guide, which allowsoperation of the hand chain from virtually any position, even in extremely confined areas.The Yalelift 3600 can be operated at the side of the load or from any other positionincluding horizontal pulling. The plane between top and bottom hook must always

be in a straight line.

More flexibility gives greater safety - operators can now work outside of the immediate

danger zone reducing the risk of operator injury.

Safety under control: The Yalelift 3600 for heavy industrial applications and will revolutioniseevery operation. By means of the 3600 rotating hand chain guide, the user can operate thehoist from all directions and is no longer directly within the danger zone as before.

You choose: The Yalelift 3600 can be operated safely and efficiently from all positions, evenfrom the side of the load. This means more safety and greater flexibility of the workingposition.

Work from above: The flexibility of the Yalelift 3600 allows the operator to work from directlyabove the load. The advantage of this application is you can have a long lift whilst using arelatively short hand chain. The revolutionary chain guide ensures a precise and smoothchain operation at all times.

Capacity Falls of Chain Lifting Closed Weight @ Epoxy powder coat Corrosion resistant Add. (SWL) load dimensions height height standard standard c/w overload standard c/w overload lifting chain HOL unit protection unit protection height kgs mm mtrs mm kgs Price £ Price £ Price £ Price £ £/m HOL 500 1 5 x 15 3 300 9 £158 £231 £300 £424 £21 1000 1 6 x 18 3 335 13 £169 £243 £313 £485 £21 2000 1 8 x 24 3 395 20 £240 £339 £403 £576 £24 3000 1 10 x 30 3 520 29 £383 £478 £574 £749 £30 5000 2 10 x 30 3 654 38 £515 £610 £785 £959 £50 10000 3 10 x 30 3 825 71 £834 £932 £1166 £1339 £85 20000 6 10 x 30 3 1010 196 £2300 £2496 £2895 £3241 £170

Canvas chain containers to suit Yalelift 360:

500 / 1 04600001 £52 04600024 £57 04600029 £66 1000 / 1 04600002 £58 04600025 £66 04600030 £73 2000 / 1 04600003 £76 04600026 £81 04600031 £88 3000 / 1 04600004 £81 04600027 £87 04600032 £95 5000 / 2 04600005 £84 04600028 £87 04600033 £95

Capacity 6 mtrs of chain 12 mtrs of chain 18 mtrs of chain (kgs) Part no. £ Part no. £ Part no. £

Handwheel

cover rotates 3600.*

13

Spare parts for the Yalelift hand chain hoists are on pages 170-185.*

Protection classification (on request)II 2 GD c IIB T4 T 125o C X, II 2 GD c IIB T3 T 145o C

Further details on pages 16 & 17

Yalelift 360®MK III ‘PREMIUM’ HAND CHAIN HOISTS



500 1 3 50 - 180 180 - 300 245 20 21 £336 £586 £21 1000 1 3 58 - 180 180 - 300 272 27 29 £396 £662 £21 2000 1 3 58 - 180 180 - 300 323 44 46 £492 £827 £24 3000 1 3 74 - 180 180 - 300 382 77 79 £698 £1105 £30 5000 2 3 98 - 180 180 - 300 550 125 129 £1053 £1546 £50

Capacity Falls of Lifting Beam width Closed Weight Standard Corrosion Add. (SWL) load height Type A Type B height kgs finish resistant lift height kgs chain mtrs mm mm mm (A) (B) price £ price £ £/m HOL

YLITP ‘INTEGRAL’ PUSH TROLLEY HOISTS

YLITG ‘INTEGRAL’ GEARED TROLLEY HOISTS

The combination of the Yalelift 360 with a low headroom manual trolley provides even moreflexibility in the application of this revolutionary hoist. All units up to 3000kgs are provided witha single fall of load chain and the headroom has further been reduced. Ideal for applicationswith low ceilings and limited headroom. The manual trolleys are adjustable to fit a wide rangeof beam profiles (e.g. INP, IPE, IPB). Depending on the beam flange width an adjustment up to300 mm can be easily made. Anti-tilt and anti-drop devices are fitted as standard.

500 1 3 50 - 180 180 - 300 245 24 25 £400 £666 £31 1000 1 3 58 - 180 180 - 300 272 32 33 £461 £743 £31 2000 1 3 58 - 180 180 - 300 323 49 50 £557 £908 £34 3000 1 3 74 - 180 180 - 300 382 82 84 £755 £1114 £40 5000 2 3 98 - 180 180 - 300 550 130 134 £1117 £1625 £60 10000 3 3 - 125 - 310 784 - 175 £2979 £4226 £95

Capacity Falls of Lifting Beam width Closed Weight Standard Corrosion Add. (SWL) load height Type A Type B height kgs finish resistant lift height kgs chain mtrs mm mm mm (A) (B) price £ price £ £/m HOL

*Available in push or

geared travel and as

standard finish or

corrosion resistant.

Ultra low headroom hand chain hoistwith integrated push or geared trolley

The hand chain hoist Model Yalelift LH with integrated low headroom manual trolley is the latestdevelopment of the Yalelift IT. Where an even closer headroom is essential, the Yalelift LH is theideal choice.

• The specially developed chain reeving system and the chain guide allow the bottom block to be pulled laterally to the hoist further up to and almost against the beam flange.• The proven and stepless adjustment system allows quick and easy assembly of the trolley.• Excellent rolling features, due to machined steel wheels mounted on pre-lubricated, encapsulated ball bearings.• Anti-tilt and anti-drop devices are fitted as standard.• Corrosion resistant options are also available on request.

Capacity Falls of Lifting Beam width Closed Net weight @ std HOL Standard Add. lift height (SWL) load height Type A Type B height Type A Type B finish £/per mtr HOL chain Push Geared Push Geared Push Geared Push Geared kgs mtrs mm mm mm kgs kgs kgs kgs price £ price £ price £ price £ 500 1 3 60 - 180 180 - 300 188 27 31 27 32 £1197 £1241 £21 £31 1000 1 3 70 - 180 180 - 300 211 35 40 36 41 £1344 £1468 £21 £31 2000 1 3 82 - 180 180 - 300 264 61 65 62 67 £1525 £1650 £24 £34 3000 1 3 100 - 180 180 - 300 316 107 112 109 114 £1949 £2097 £30 £40 5000 2 3 110 - 180 180 - 300 425 152 157 156 161 £2163 £2371 £50 £60 10000 3 3 125 - 180 180 - 310 565 - - - - - £6296 - £95

with

extremely

low hook path

dimension.

YLLHP/G TROLLEY HOISTS

14

ULTRA LOWHEADROOM

Protection classification II 2 GD c IIB T4 T 125o C X, II 2 GD c IIB T3 T 145o C

(Available on request)Further details on pages 16-17

Protection classification II 2 GD c IIB T4 T 125o C X, II 2 GD c IIB T3 T 145o C

(Available on request)



15

The above units are all from the Yalelift 360 programme. The hoists/trolleys are fully corrosionresistant including the bottom hooks and are all fitted with stainless steel load and hand chain.

500 1 3 300 - 9.0 £647 £82 900 1 3 335 - 13.0 £723 £82 1250 1 3 395 - 20.0 £957 £100 2000 1 3 520 - 29.0 £1370 £132 4000 2 3 654 - 38.0 £2699 £222

Capacity Falls of Lifting Closed Beam Weight @ Price Additional (SWL) load height width std. height HOL kgs chain mtrs mm kgs £ £/m

500 1 3 245 50 - 180 20.0 £876 £82 900 1 3 272 50 - 180 27.0 £1005 £82 1250 1 3 323 58 - 180 44.0 £1482 £100 2000 1 3 382 74 - 180 77.0 £2367 £132 4000 2 3 550 98 - 180 125.0 £3659 £222


500 1 3 245 50 - 180 24.0 £991 £125 900 1 3 272 50 - 180 32.0 £1264 £125 1250 1 3 323 58 - 180 49.0 £1739 £144 2000 1 3 382 74 - 180 82.0 £2682 £176 4000 2 3 550 98 - 180 130.0 £3968 £265


Towerlift for applications on traversing tower systems.The Yalelift360 Towerlift is the inverted version of the Yalelift 360 and specifically designed for operation on traversingtower systems. It is provided with a special chain guide and totally enclosed housing. The basic version of the Towerliftoffers capacities of 1000 and 2000kgs. The unit is supplied with a black powder coat finish as standard.

TowerliftES for use in standard or inverted mode. The Towerlift ES is a further development of the Towerlift. Like the Towerlift, the ESmodel is providedwith a chain reeving system, specifically designed for the stage/entertainment industry. This allowsoperation in standard hoist configuration as well as in inverted mode. The hoist comes completewith a revolving chain container, which can be used in standard hoist configuration or inverted mode.

Model Capacity Falls Lifting Closed Weight @ Price Add.(SWL) of load height height standard lifting

chain HOL heightkgs mtrs mm kgs £ £/m HOL

Towerlift 1000 1 3 335 14.0 £389 £21

Towerlift 2000 1 3 395 21.0 £554 £24

TowerliftES 1000 1 3 335 15.0 £492 £21 Towerlift

Towerlift/ES ‘INVERTED’ HAND CHAIN HOISTS

CORROSION RESISTANT HOISTS WITH STAINLESS CHAINS

TowerliftES

Yalelift 360®‘CR/SS’ HAND CHAIN HOISTS

Yalelift ITP ‘CR/SS’ INTEGRAL PUSH TROLLEY HOISTS

Yalelift ITG ‘CR/SS’ INTEGRAL GEAR TROLLEY HOISTS

Available inexplosion proofversion!

*Chain bag for the Towerlift to suit up to 50mtrs, article no. 04600049 = £95.

*Chain bag for the Towerlift ES to suit up to 50mtrs, article no. 04600877 = £123.



SPARK RESISTANT HOISTS AND TROLLEYS

16

The ATEX range.New. Safe. Competent.

For full technical specification and application detailsplease contact the sales team for the comprehensiveATEX product brochure or use QR code.

Why explosion protection?Explosion protection for electrical and mechanical machinery is animportant precautionary measure to ensure the safety of persons andall kinds of production, storage and distribution systems, whenexplosive mixtures of combustible gases, dusts and air may occur.

What does explosion protection achieve?Explosion protection can mean to generally prevent the occurrence of an explosive mixture. Explosionprotection can also be achieved by eliminating potential ignition sources in advance, e.g. hightemperatures and sparking by designing components accordingly and by permanent monitoring ofoperation, or by using a flame-proof enclosure for the source of ignition to protect the surroundingarea against possible effects of an internal explosion.

In many trades and industries, combustible gases, vapours and dusts are handled which may causeexplosions.

Examples of explosion hazards in various industries:• Chemical industry.• Waste disposal sites.• Energy production companies.• Waste management companies.• Gas suppliers.• Metal processing companies.• Wood-processing companies.• Paint shops.• Agriculture.• Food and feeding-stuffs industry.• Pharmaceutical industry.• Refineries.• Recycling companies.

Levels of protection:Columbus McKinnon offer three levels of protection - BASIC, MEDIUM, and HIGH.

Under directive 94/9/EC, equipment for areas with an explosion hazard are assigned to groups, categories and temperature classes. This isnecessary as the requirements for equipment need not be the same for every application and for every hazard classification.

BASICII 3 GD c IIB T4 X (Zone 2/22)

• Unit special coated.

• Load chain galvaniczinc-plated, stainlesssteel hand chain.

• Top and load hookspecial coated.

• Trolleys special coatedwith buffers.

• Plain roller special coated.

• Brake with coolingelement.

MEDIUMII 2 GD c IIB T4 X (Zone

1/21 & 2/22)

• Unit special coated.

• Load chain galvaniczinc-plated, stainlesssteel hand chain.

• Top and load hookcopper plated.


• Bronze plain roller.


HIGHII 2 GD c IIC T4 X (Zone

1/21 & 2/22)

• Unit specialcoated.

• Stainless steel loadand hand chain.

• Top and load hookcopper plated.


• Bronze plain roller.


NB: It is the responsibility of the user to identify the explosion proof classification required, NOT the hoist manufacturer or the supplier.

All of Yale’s ATEX hoists meet the following standards: EN1127-1:1997; EN13463-1:2001; EN13463-5:2003, and are supplied complete with

the relevant ATEX approval documentation. For further information please visit our ATEX web site: www.atexhoists.eu



SPARK RESISTANT HOISTS AND TROLLEYS

17

Capacity ATEX Falls of Lifting Chain Closed Weight @ Price Add. (SWL) level load chain height dimensions height std. HOL HOL kgs mtrs mm mm kgs £ £/m 750 Basic 1 1.5 6 x 18 350 7.2 £319 £11 1500 Basic 1 1.5 8 x 24 420 12.5 £338 £14 3000 Basic 1 1.5 10 x 30 520 21.5 £426 £20 6000 Basic 2 1.5 10 x 30 700 32 £526 £40

UNOplus RATCHET LEVER HOISTS - ATEX

Capacity ATEX Falls of Lifting Chain Closed Weight @ Price Add. (SWL) level load chain height dimensions height std. HOL HOL kgs mtrs mm mm kgs £ £/m 500 Medium 1 1.5 5 x 15 300 9 £887 £52 1000 Medium 1 1.5 6 x 18 335 13 £1033 £82 2000 Medium 1 1.5 8 x 24 395 20 £1238 £55 3000 Medium 1 1.5 10 x 30 520 29 £1635 £60 5000 Medium 2 1.5 10 x 30 654 38 £2156 £81 10000 Medium 3 1.5 10 x 30 825 71 £3635 £102 20000 Medium 6 1.5 10 x 30 1010 196 £6089 £204

Yalelift 3600 HAND CHAIN HOISTS - ATEX

Yalelift ITP INTEGRAL PUSH TROLLEY HOISTS - ATEX Capacity ATEX Falls of Lifting Type ‘A’ Type ‘B’ Closed Price Additional (SWL) level load height beam width weight beam width weight height HOL kgs chain mtrs mm kgs mm kgs mm £ £/m

500 Medium 1 3 50 - 180 20 180 - 300 21.0 245 £1288 £52 1000 Medium 1 3 50 - 180 27 180 - 300 29.0 272 £1740 £52 2000 Medium 1 3 58 - 180 44 180 - 300 46.0 323 £2355 £55 3000 Medium 1 3 74 - 180 77 180 - 300 79.0 382 £3020 £60 5000 Medium 2 3 98 - 180 125 180 - 300 129.0 550 £4225 £81

Yalelift ITG INTEGRAL GEARED TROLLEY HOISTS - ATEX Capacity ATEX Falls of Lifting Type ‘A’ Type ‘B’ Closed Price Additional (SWL) level load height beam width weight beam width weight height HOL kgs chain mtrs mm kgs mm kgs mm £ £/m

500 Medium 1 3 50 - 180 24 180 - 300 25 245 £1611 £93 1000 Medium 1 3 50 - 180 32 180 - 300 33 272 £2080 £93 2000 Medium 1 3 58 - 180 49 180 - 300 50 323 £2695 £96 3000 Medium 1 3 74 - 180 82 180 - 300 84 382 £3504 £101 5000 Medium 2 3 98 - 180 130 180 - 300 134 550 £5207 £122 10000 Medium 3 3 - - 180 - 310 on request 784 £7740 £144 20000 Medium 6 3 - - 180 - 310 on request on request £14224 £288

Also available in explosion protection:

• BETA-EX electro winch.

• OMEGA-EX manual winch.

• HTP/G manual trolleys.

• Yalelift LH ultra low headroom.

• CPA-ATEX pneumatic chain hoist.



18

VLRP / VLRG SWIVEL TRUCK TROLLEY HOIST

Model Capacity Minimum Maximum Max. beam Minimum Pull on hand Weight beam width beam width thickness curve radius chain at WLL VLRP VLRG kgs mm mm mm mtrs daN kgs kgs VLRP/G 0.25 250 67 117 16 0.5 8 58 66 VLRP/G 0.5 500 67 117 16 0.5 16 58 66 VLRP/G 1.0 1000 76 117 16 0.5 32 58 66 VLRP/G 1.5 1500 86 140 16 0.8 26 113 122 VLRP/G 2.0 2000 102 140 16 0.8 35 115 123 VLRP/G 3.0 3000 102 178 16 1.0 19 158 172 VLRP/G 4.0 4000 280 178 16 1.0 27 160 175 VLRP/G 5.0 5000 117 203 22 1.2 33 213 227 VLRP/G 6.0 6000 117 203 22 1.2 41 213 227

Model VLRP VLRP VLRP VLRP VLRP VLRP VLRP VLRP VLRP 0.25 0.5 1.0 1.5 2.0 3.0 4.0 5.0 6.0

A, mm 157 157 157 171 171 210 234 252 252 B, mm 51 51 51 56 56 68 65 71 71 C, mm 167 167 167 220 220 250 250 257 257 D, mm 167 167 167 220 220 250 250 257 257 E, mm 95 95 95 114 114 162 162 182 182 F, mm 127 127 127 152 152 203 203 229 229 G, mm 22 22 22 16 16 24 24 22 22 H, mm 25 25 25 29 29 34 42 42 42 K, mm 184 184 184 289 289 294 294 294 294 L, mm 165 165 165 194 194 195 195 223 223 M, mm 64 64 64 77 77 101 101 114 114 N, mm 35 35 35 77 77 77 77 77 77 O, mm 75 75 75 48 48 87 87 98 98

Swivel truck low headroom trolley hoist

Capacities: 250 - 6000kgs

The hand chain hoist series VLR with integrated manual trolley drivefeatures extremely low headroom capabilities and provides optimalusage of the available storage space in confined areas.

Hand wheel and gear case are positioned outside the reach of thebottom flange, thus allowing the bottom block to be raised almostto the underside of the beam. The swivel truck feature of the trolleysuspension enables travelling on extremely tight radius curves.

Features include:

• All-steel construction with zinc-plated load and hand chains.• Swivel trolley designed for runways with extremely narrow radius.• All units are built to order for a predetermined beam dimension. They cannot be adjusted retro-actively to other beams.• Anti-drop and anti-tilt devices as standard.

Optionals:

• Overload protection, chain containers and buffers.

Yale hoists and trolleys are not designed for passenger elevation applications and must not be used for this purpose.

VLRP (PUSH) DIMENSIONS

Model VLRG VLRG VLRG VLRG VLRG VLRG VLRG VLRG VLRG 0.25 0.5 1.0 1.5 2.0 3.0 4.0 5.0 6.0

A, mm 157 157 157 171 171 210 234 252 252 B, mm 51 51 51 56 56 68 65 71 71 C, mm 167 167 167 220 220 250 250 257 257 D, mm 167 167 167 220 220 250 250 257 257 E, mm 95 95 95 114 114 162 162 182 182 F, mm 127 127 127 152 152 203 203 229 229 G, mm 22 22 22 16 16 24 24 22 22 H, mm 25 25 25 29 29 34 42 42 42 I, mm 119 119 119 182 182 206 206 216 216 J, mm 95 95 95 159 159 155 155 176 176 K, mm 184 184 184 289 289 294 294 294 294 L, mm 165 165 165 194 194 195 195 223 223 M, mm 64 64 64 77 77 101 101 114 114 N, mm 35 35 35 77 77 77 77 77 77 O, mm 75 75 75 48 48 87 87 98 98

VLRG (GEARED) DIMENSIONS

!

Beam profile and dimension as well as curve radiusmust always be specified when ordering.*

Ideal for

extremely tight

radius beams!*



19

VNRP / VNRG COMPACT LOW HEADROOM TROLLEY HOIST

Model Capacity Closed height Minimum Pull on hand Weight curve radius at WLL VNRP VNRG kgs mm mtrs daN kgs kgs VNRP/G 1,5 1500 159 2.0 19 95 105 VNRP/G 2,0 2000 159 2.0 25 96 107 VNRP/G 3,0 3000 188 2.0 20 140 153 VNRP/G 4,0 4000 203 2.3 26 141 156 VNRP/G 5,0 5000 223 2.6 36 263 290 VNRP/G 6,0 6000 223 2.6 43 263 290 VNRP/G 8,0 8000 280 2.9 30 298 354 VNRP/G 10,0 10000 292 3.0 40 469 507 VNRP/G 12,0 12000 292 – 47 469 507 VNRP/G 16,0 16000 346 – 31 734 771 VNRP/G 20,0 20000 438 – 40 895 968 VNRP/G 24,0 24000 438 – 47 895 968

Model VNRP VNRP VNRP VNRP VNRP VNRP VNRP VNRP VNRP VNRP VNRP VNRP 1.5 2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0 24.0

A, mm 159 159 188 203 222 222 279 292 346 438 438 438 B, mm 518 518 518 518 667 667 667 667 667 772 772 772 C, mm 259 259 259 259 333 333 333 333 333 386 386 386 D, mm 259 259 259 259 333 333 333 333 333 386 386 386 E, mm 130 130 168 168 187 187 225 216 216 302 308 308 E1, mm 130 130 168 168 187 187 225 248 248 302 314 314 F, mm 222 222 270 270 305 305 356 397 397 473 489 489 G, mm 210 210 270 270 305 305 343 365 365 473 483 483 J, mm 29 29 34 34 34 34 52 57 57 76 92 92 L, mm 29 29 34 34 36 36 43 44 44 51 51 51 M, mm 114 114 162 162 183 183 210 248 248 298 298 298 R, mm 332 332 332 332 419 419 419 419 419 477 468 468 S, mm 152 152 203 203 229 229 254 297 297 343 343 343

Compact low head room hoist withintegrated push or geared trolley

Capacities: 1500 - 24,000kgs

On account of a special chain reeving system and correspondingchain guide the trolley hoist series VNRG offers minimum headroomand maximum usage of the available room height. These hoistshave been specially designed for heavy industrial applications.

Features include:

• All-steel construction with zinc-plated load and hand chains.• All units are built to order for a predetermined beam dimension. They cannot be adjusted retro-actively to other beam sizes.• Anti-drop and anti-tilt devices as standard.

Optionals:

• Chain containers and buffers.

Yale hoists and trolleys are not designed for passenger elevation applications and must not be used for this purpose.

VNRP (PUSH) DIMENSIONS

Model VNRG VNRG VNRG VNRG VNRG VNRG VNRG VNRG VNRG VNRG VNRG VNRG 1.5 2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0 24.0

A, mm 159 159 188 203 222 222 279 292 292 346 438 438 B, mm 518 518 518 518 667 667 667 667 667 772 772 772 C, mm 259 259 259 259 333 333 333 333 333 386 386 386 D, mm 259 259 259 259 333 333 333 333 333 386 386 386 E, mm 130 130 168 168 187 187 225 216 216 302 308 308 E1, mm 130 130 168 168 187 187 225 248 248 302 314 314 F, mm 222 222 270 270 305 305 356 397 397 473 489 489 G, mm 210 210 270 270 305 305 343 365 365 473 483 483 J, mm 29 29 34 34 34 34 52 57 57 76 92 92 L, mm 29 29 34 34 36 36 43 44 44 51 51 51 M, mm 114 114 162 162 183 183 210 248 248 298 298 298 R, mm 332 332 332 332 419 419 419 419 419 477 468 468 S, mm 152 152 203 203 229 229 254 297 297 343 343 343

VNRG (GEARED) DIMENSIONS

Beam profile and dimension as well as curve radiusmust always be specified when ordering.*

!



HTP ‘STANDARD’ PUSH TRAVEL TROLLEYS

Capacity Beam Weight Standard Corrosion Capacity Beam Weight Standard Corrosion (SWL) width units resistant (SWL) width units resistant kgs mm kgs £ £ kgs mm kgs £ £ Type ‘A’ Type ‘B’

500 50 - 220 8.0 £76 £160 500 160 - 300 10.6 £85 £257

1000 50 - 220 9.0 £106 £214 1000 160 - 300 12.0 £117 £266

2000 66 - 220 16.0 £142 £276 2000 160 - 300 19.3 £158 £286

3000 74 - 220 32.0 £239 £415 3000 180 - 300 35.8 £256 £445

5000 90 - 220 48.0 £364 £546 5000 180 - 300 52.2 £389 £566

• 2.5 metre hand chain drop is fitted as standard, to suit 3 metre HOL.

• £10 per additional metre HOL of HTG hand chain.

• £333 for optional beam locking device on standard unit. £980 on a corrosion resistant trolley.

• Optional track clamp for HTP/HTG trolleys 500 - 5000kgs is available. Price available on request.

• Optional lock nuts for HTP/HTG trolleys 500 - 2000kgs are available. Price available on request.

Capacity Beam Weight Standard Corrosion Capacity Beam Weight Standard Corrosion (SWL) width units resistant (SWL) width units resistant kgs mm kgs £ £ kgs mm kgs £ £ Type ‘A’ Type ‘B’

500 50 - 220 9.7 £141 £263 500 160 - 300 12.6 £152 £278

1000 50 - 220 11.2 £169 £294 1000 160 - 300 14.1 £181 £310

2000 66 - 220 18.0 £207 £383 2000 160 - 300 21.3 £219 £424

3000 74 - 220 35.4 £275 £441 3000 180 - 300 39.2 £294 £563

5000 90 - 220 51.8 £377 £562 5000 180 - 300 56.0 £407 £600

- - - - - 10000 125 - 310 104.0 £704 £1320

- - - - - 20000 125 - 310 230.0 £1915 £2968

Trolley clamp model CTP


The easy installation to any beam makes the CTP suitable for fixing to any hoists,pulleys and loads you wish to move. It can be adjusted quickly to the beam width byturning the main spindle. Safety is ensured by the special locking lever. The spindleand snap-pin stops are galvanised to protect against corrosion.

CTP - 1A 1000 05500024 60 - 150 0.6 2.5 £118

CTP - 2A 2000 05500025 75 - 200 0.9 9.9 £168

CTP - 2B 2000 05500026 200 - 300 0.9 10.3 £230

CTP - 3A 3000 05500027 75 - 200 1.15 17.5 £235

CTP - 3B 3000 05500028 200 - 320 1.15 19.5 £261

Model Capacity Article Beam Minimum Weight Price (SWL) number width curve radius kgs mm mm kgs £

HTG ‘STANDARD’ GEAR TRAVEL TROLLEYS

CTP ‘INTEGRAL’ TRAVEL TROLLEY BEAM CLAMPS

20



LMG CABLE GRIPS

ASH-1 41000104 1000 0.4 £20 ASH-3 41000035 3000 1.25 £25 ASH-5 41000036 5000 2.35 £31 ASH-8 41000037 8000 3.6 £35

Model Article no. Pulling force Max rope tensile Cable size Eye opening Weight Price daN strength - N/mm2 mm mm kgs £

Weight Price Model Article no. Capacity Rope travel Capacity Rope travel (SWL) kgs mtrs (SWL) kgs mtrs kgs £

Model Article no. Capacity (SWL) Weight Price kgs kgs £

LMG I 02606516 2000 1770 4.5 - 8.4 31 x 44 1.6 £98 LMG II 02606517 3000 1770 8.4 - 15.0 31 x 44 2.9 £155 LMG II-X 02608043 3000 1960 8.0 - 14.0 31 x 44 2.9 £164 LMG II-X 02608043 3000 1770 8.0 - 20.0 31 x 44 2.9 £164 LMG III 02607609 5000 1770 18 - 28.0 66 x 93 9.5 £559

115D-V 02740001 500 4.6 1000 2.3 4.5 £330 202WN-V 02740002 500 6.0 1000 3.0 5.2 £352 434WN-V 02740003 500 9.0 1000 4.5 5.8 £359 S434WN-V 02740004 700 6.0 1400 3.0 6.0 £369 S404WN-V 02740005 900 5.2 1800 2.6 5.9 £374

The LM cable puller is a general purpose, lightweight unit designed for pulling and tensioning. It can beused in a single or double-fall configuration. In the double-fall configuration, the pulling force is doubled andthe operating length is halved.

The LMG is a device for gripping, pulling, and tensioning unsheathed wire ropes, cables, and metal rods inall forms. The parallel jaws provide a firm, non-slip grip without causing damage to the wire. A special spring-loaded guide prevents the grip from dropping off the wire and affords instant release without jamming. Themodel LMG II-X is supplied with grooved jaws for use on wires with tensile strength of up to 1960 N/mm2.

Yale’s weld on hooks are universal attachments for use on trucks, excavators, low loaders, and spreaderbeams, etc. The hook and safety latch are epoxy resin coated for added corrosion protection and the returnspring is made from stainless steel.

Double fallSingle fall

Model Article no. WLL Design type Chain size Weight Price daN mm kgs £

RLSP-08-00 43300015 4000 Clevis 8 3.6 £40 RLSP-10-00 43300016 6300 Clevis 10 3.6 £42 RLSP-13-00 43300017 10600 Clevis 13 3.8 £47 RLSP-08-HH 43300012 4000 Parallel hook 8 4.5 £40 RLSP-10-HH 43300013 6300 Parallel hook 10 5.5 £45 RLSP-13-HH 43300014 10600 Parallel hook 13 8.4 £60

The Yale load binder is a universal tool to restrain and secure loads and freight. Manual operation of thebinder lever extends or retracts the threaded spindles. Clevis ends are for use with existing fasteningdevices or available with parallel hooks for direct attachment to chains.

Designed for pulling

and tensioning only.

Lifting and Lowering of

loads is NOT permitted.*

ASH WELD ON HOOKS

RLSP LOAD BINDERS

LM CABLE PULLERS

21

NB. It is the users responsibility to ensure that the selected cable grip is suitable for their grade of wire rope.*



Yaletrac®‘HEAVY DUTY’ CABLE PULLERS

Yaletrac® cable pullers

Pulling force: 800 - 3200 daN

The Yaletrac® range of portable cable pullers provide a versatile tool forpulling, lifting, lowering, tensioning, and securing loads over longdistances. They are easy and safe to use and are almost service free.

They are light weight, compact, high strength aluminium alloy housingwith a large flat bottom surface for increased stability in horizontal aswell as vertical working positions.

Specifically designed for applications within industry, building construction,civil engineering, ship building, power line construction, and oilrefineries, etc.

Features include: -

• Forward and reversing levers, operating in tandem provide slimdesign and assure power transfer along the centre line.

• A lever disengages the rope clamp system allowing easy and smoothinstallation / removal of the wire rope.

• Overload protection is provided by a shear pin in the forwardoperating lever. Spare shear pins are conveniently located in thecarrying handle or operating lever.

• Large opening in the top of the units allows easy cleaning: simplyflush the unit with a bucket of water, apply motor oil for lubricationand the Yaletrac® is ready for use again.

• The Yaletrac® cable pullers use a special flexible wire rope. It has sixstrands with a steel core. The rope is tapered at one end for easythreading and fitted with an eye sling hook with safety latch on theother end.

Every Yaletrac® cable puller is factory tested with overload and issupplied with an EC Declaration of Conformity, showing the serialnumber and an operating instruction manual.

Aluminium housing.

Special wire rope.

Tandem clamping system Operating handlever.

Rope clampdisengagement lever.

Opening for cleaning.Forward and reversing levers.

Overload protection(shear pin).

Anchor pin.

22



Yaletrac®‘HEAVY DUTY’ CABLE PULLERS

800kgs 1600kgs 3200kgs

Spare parts for all Yaletrac cable pullers canbe found in the spare parts section at the backof this catalogue on pages 164-169.*

Model Capacity Rope advance Lever pull Weight Rope Yaletrac unit complete Base unit only(WLL) per double at WLL without rope weight with 20mtrs of cable

stroke inkgs mm daN kgs kg/mtr Article no. £ Article no. £

Y08 800 60 24 7 0.29 02409594 £227 02409053 £151

Y16 1600 60 30 14 0.53 02409595 £319 02409054 £217

Y32 3200 40 50 21 1.00 02409597 £628 02409055 £515

Model 2 5 10 20 30 40 50 mtrs mtrs mtrs mtrs mtrs mtrs mtrs

Y08 £48 £58 £72 £106 £140 £174 £209

Y16 £70 £82 £107 £161 £212 £265 £317

Y32 £89 £106 £140 £208 £275 £343 £408

• All ropes are fused and tapered at one end. The other end terminates with eye hook in a heart shaped thimble secured by amechanical splice.

Model L H H1 B B1 Lever Rope length diameter mm mm mm mm mm mm mm

Y08 430 168 240 60 - 800 8.4

Y16 545 190 270 72 97 790/1190 11.5

Y32 680 230 330 91 110 790/1190 16.0

Optional: Yaletrac storage box made fromsteel plate, approx. 740 x 260 x 450mm.

23

DIMENSIONS

TECHNICAL DATA / PRICES

OPERATING ROPES



YSB SPRING BALANCERS

Spring balancersCapacities: 0.5 - 300kgs

Yale is now able to offer a wide range of spring balancersand retractors with capacities from 0.5 to 300kgs.

Spring balancers allow the worker to move the suspended tool or object up or down with very little effort. Depending on the spring adjustment,the object will remain in position or retract when no force is applied.

With a spiral groove on a tapered drum, the winding radius is increased to match the torque build-up of the spring, thus neutralising it andachieving a balanced condition. This is the main difference between spring balancers and retractors.

Retractors are designed to retract the cable when no force is applied. An amount of downward force must be continually applied to keep thesuspended object at its extended position. The torque output of the rewind spring increases as the cable is extended, and retracting thesuspended object to the uppermost adjusted position when released.

• YBF series, 0.5 - 200kgs (standard type). Enclosed body design ensures operator safety; no trapped fingers or hands. The YBF has an anti-wear feature that prevents damage to the aluminim housing and can be replaced without dismantling the housing. Wire replacement can be done without dismantling the body. The containerised spring cartridge enables safe and simple servicing.

• YBA series, 9 - 70kgs with additional safety-device (wire arrest mechanism). The YBA series has all of the features of the YBF series, but also has a wire arrest system. This is ideal for applications where there is the possibility of damage to the wire strands, e.g. fabrication and welding production lines.

• YBH series, 100 - 300kgs (heavy duty). The YBH series is available with a 1.5mtr lift for capacities up to 300kgs and a 3mtr lift up to 160kgs. The YBH is a heavy duty unit with a compact design. It also has the added feature of a built in spring failure device and overload protection.

Possible applications include:

4 Resistance spot welding machines.

4 Measuring machines.

4 Compressed air equipment.

4 X-Ray apparatus.

4 Power tools (electric driven).

4 Welding machines.

4 Welding templates.

4 Paint spraying apparatus.

4 Cages.

PORTABLE TOOLS WELDING GUN BAG CLOSERS GENERAL USE

YBF YBA

YBH

24

Load indicator discclearly shows thepre-set capacity.

Products

Yale Industrial

GmbHYBF/ A

Sprin

g ba

lanc

ers

Download brochure via QR code.*

Please note:

Spring balancers are

not lifting devices.!



Model Part no. Capacity Lift Weight Price

kgs mtrs kgs £

YBF-03L 08300005 1.5 - 3 2.5 4.6 £189 YBF-05L 08300006 2.5 - 5 2.5 4.8 £205 YBF-09L 08300021 4.5 - 9 2.3 8.0 £282 YBF-15L 08300022 9 - 15 2.3 8.0 £427 YBF-22L 08300023 15 - 22 2.3 8.5 £452 YBF-30L 08300024 22 - 30 2.3 9.5 £461 YBF-40L 08300025 30 - 40 2.3 11.0 £579 YBF-50L 08300026 40 - 50 2.3 12.0 £616 YBF-60L 08300027 50 - 60 2.3 13.0 £669 YBF-70L 08300028 60 - 70 2.3 13.5 £697 YBF-85L 08300029 70 - 85 2.5 26.0 £980 YBF-100L 08300030 85 - 100 2.5 27.0 £987 YBF-120L 08300031 100 - 120 2.5 29.0 £1087 YBF-130L 08300032 110 - 130 2.5 31.0 £1235

EXTENDED length


kgs mtrs kgs £

YBF-01 08300001 0.5 - 1.5 1.0 1.0 £53 YBF-02 08300002 1 - 2 1.0 1.0 £54 YBF-03 08300003 1.5 - 3 1.3 1.8 £67 YBF-05 08300004 2.5 - 5 1.3 1.9 £69 YBF-09 08300007 4.5 - 9 1.3 4.0 £151 YBF-15 08300008 9 - 15 1.3 4.0 £161 YBF-22 08300009 15 - 22 1.5 8.0 £250 YBF-30 08300010 22 - 30 1.5 9.0 £342 YBF-40 08300011 30 - 40 1.5 10.5 £435 YBF-50 08300012 40 - 50 1.5 11.0 £446 YBF-60 08300013 50 - 60 1.5 12.0 £457 YBF-70 08300014 60 - 70 1.5 12.5 £485 YBF-85 08300015 70 - 85 1.5 13.0 £605 YBF-100 08300016 85 - 100 1.5 13.5 £618 YBF-120 08300017 100 - 120 1.5 29.0 £746 YBF-140 08300018 120 - 140 1.5 31.0 £908 YBF-170 08300019 140 - 170 1.5 35.0 £1061 YBF-200 08300020 170 - 200 1.5 36.0 £1182

STANDARD length

YBF SERIES - TECHNICAL SPECIFICATION / PRICES


kgs mtrs kgs £

YBA-15L 08300040 9 - 15 2.3 10.0 £547 YBA-22L 08300041 15 - 22 2.3 10.0 £559 YBA-30L 08300042 22 - 30 2.3 11.0 £571 YBA-40L 08300043 30 - 40 2.3 14.5 £725 YBA-50L 08300044 40 - 50 2.3 15.0 £777 YBA-60L 08300045 50 - 60 2.3 16.0 £841 YBA-70L 08300046 60 - 70 2.3 16.5 £867

EXTENDED length


kgs mtrs kgs £

YBA-15 08300033 9 - 15 1.3 5.5 £406 YBA-22 08300034 15 - 22 1.5 9.5 £414 YBA-30 08300035 22 - 30 1.5 10.0 £425 YBA-40 08300036 30 - 40 1.5 12.5 £543 YBA-50 08300037 40 - 50 1.5 13.0 £562 YBA-60 08300038 50 - 60 1.5 13.5 £569 YBA-70 08300039 60 - 70 1.5 14.0 £605

STANDARD length

YBA SERIES - TECHNICAL SPECIFICATION / PRICES


kgs mtrs kgs £

*YBH-100L 08300062 85 - 100 3 32.0 £1863*YBH-120L 08300063 100 - 120 3 42.0 £1896*YBH-140L 08300064 120 - 140 3 45.0 £2576*YBH-160L 08300065 140 - 160 3 48.0 £2641

EXTENDED length


kgs mtrs kgs £

*YBH-225 08300058 200 - 225 1.5 48.0 £2634 *YBH-250 08300059 225 - 250 1.5 50.0 £2666 *YBH-275 08300060 250 - 275 1.5 52.0 £2770 *YBH-300 08300061 275 - 300 1.5 56.0 £2848

STANDARD length

YBH SERIES - TECHNICAL SPECIFICATION / PRICES

YSB SPRING BALANCERS

25



26

Model Pulling Lifting Rope Motor ED at Weight 400 volt 230 volt force speed diameter perf. 120 c/h 1st layer 2nd layer 3rd layer 4th layer option option daN m.min* mm kW % mtrs mtrs mtrs mtrs kgs Price £ Price £

RPE 2-13 250 13 4 0.55 40 11.2 24.4 38.8 54.5 31.8 £1665 £1798

RPE 5-6 500 6.5 6 0.55 40 7.0 16.4 27.0 38.8 32.8 £1727 £1840

RPE 5-12 500 12 6 1.10 40 11.0 24.9 39.7 55.4 41.0 £1868 £1962

RPE 9-6 990 6 8 1.10 40 10.2 23.0 37.4 - 76.0 £1996 £2489

RPE 10-6** 1000 6 8 1.10 40 10.2 23.0 37.4 - 76.9 £2222 £2680

RPE electric winch Capacities: 250 - 1000kgs

Yale wire rope winches, RPE and RPA, are designed specifically forperformance, efficiency, and safety, and offer many advantagesand options.

Their extremely compact, practical cube design and universal ropelead-offs allow individual applications in almost any position andthis makes them powerful aids for lifting and pulling loads.

The units are supplied with a certificate of conformity showing theunits serial number and an operating instruction manual, whichcontains our manufacturer’s CE declaration.

Features include:

• Voltage 400v 3phase 50hz or 230v 1phase 50hz 3 phase motor protected to IP 54, insulation class F.• Compact dimensions due to internal brake motor.• Adjustable slip clutch to protect the winch from overloading standard on 10-6 model.• Spur gear transmission with helical first gear - ensures smooth motion. Lubricated by grease and can therefore be used in any position.• Spring pressure disc brake incorporated in the motor holds the load securely even in the event of a power failure.• A plain rope drum is supplied as standard. • The rope is secured to the drum in a recess, so that the rope can be wound onto the drum in several layers without damage.• 1000kg unit is fitted with slipping clutch as standard.• 42v low voltage pendant control (inc. push button with emergency stop and 2 mtr cable) is supplied as standard.

Options:

• Different drum designs, e.g. extended to accommodate longer rope, machined grooves for exact reeling, with separation web and 2nd rope outlet for working with two ropes.• Geared limit switches to limit rope motion in both directions (in combination with 42v low voltage control).• Adjustable slip clutch to protect the winch from overloading for models RPE 2-13, RPE 5-6 and RPE 5-12.• Radio remote control.• Zinc-plated version is available on request.• Stainless brake.

Usable rope length

*In the upper layer. **With slipping clutch. • 110v option is NOT available. • Wall switch = £240. • Limit switch (up to 25 mtrs) = £250.

RPE 400/230v ELECTRIC WIRE ROPE WINCHES

Please note that the prices shownabove do NOT include ropes.*

Rope attachment.

Single-phase A.C. motor.

Different drum designs.

Spring pressure disc brake.

Gear limit switches.

Zinc-plate version.

Brake motor.

Gearbox with slip clutch.

When selecting the length of the rope please bear in mindthat a minimum of 2.5 windings have to remain on thedrum (approx. 1mtr rope)



Model Pulling Lifting speed Lifting speed Lowering Rope Weight Price force in with rated without speed with diameter upper layer load load* rated load 1st layer 2nd layer 3rd layer 4th layer daN m/min m/min m/min mm mtrs mtrs mtrs mtrs kgs £

RPA 2-13 250 13.6 20.0 22.0 4 11.2 24.4 38.8 54.5 36.7 £3568

RPA 5-6 500 6.9 10.0 11.0 6 7.0 16.4 27.0 38.8 36.7 £3568

Pulling force: 250 -500 daN

The concept is the same as with the design of the RPE model, but with a 100%duty rating. With an unlimited number of starts, the RPA model is ideally suitedfor heavy duty applications. It is not susceptible to contamination, humidity oraggressive ingress of contaminates.

Features include:

• Robust rotating piston motor with high starting torque, designed for operating pressures of between 4 and 6 bar.• Spring pressure disc brake holds the load securely even in the event of a power failure.• Sensitive control by means of direct acting valves in the control.

Optional extras (for RPA and RPE models):

• Different drum designs, e.g. extended to accommodate longer rope. Machined grooves for exact reeling, with separation web and 2nd rope outlet for working with two ropes and traversing operation.• Control including 2.5mtr hose and air coupler.• Maintenance unit for main air supply pipe (pressure regulator, manometer, lubricator and support).• Available in corrosion proof version on request.

Usable rope length

*Value for 6 bar. • Air consumption 0.75 m3/min. • Motor performance 0.55 kW.

RPA PNEUMATIC WIRE ROPE WINCHES

27

EBW ELECTRIC CONSTRUCTION WINCH

‘Scaffold hoist’Capacity: 200kgs

For quick and easy lifting and lowering of loads onconstruction sites.

Features include:

• Extending slewing frame and clips for tube racks up to max. 45mm, quickly ready for use.• Operating cable (length: 1m) and push-button pendant control with emergency stop.• Standard operating voltage: Euro-voltage 230V, 1-phase, 50Hz.• Complete with 25mtr rope length.

Model Article no. Capacity Lifting height Lifting speed Weight w/o rope Pricekgs mtrs mtrs per min kgs £

EBW200 031100030 200 25 19.2 48.5 £2116

To ensure faultless operationthe compressed air supplymust be filtered and oiled.*

NEWPRODUCT

These winches are not designed for passenger elevation applications and must not be used for this purpose.*

Please note that the prices shownabove do NOT include ropes.*



28

CPA PNEUMATIC CHAIN HOISTS

Model Capacity Falls of Lifting speed Lifting speed Lowering Air Hoist Weight @ Price Additional (SWL) load with rated without speed with consumption motor standard HOL chain load* load* rated load* rated load* HOL per mtr kgs m/min m/min m/min mm kW kgs £ £

CPA 1-13 125 1 13.1 17.1 11.3 0.9 0.4 15.4 £2121 £38 CPA 2-10 250 1 9.8 17.1 13.7 0.9 0.4 15.4 £2151 £38 CPA 2-31 250 1 31.0 52.0 36.0 1.98 1.33 21.8 £3920 £38 CPA 5-5 500 2 4.6 7.9 6.7 0.9 0.4 17.2 £2217 £89 CPA 5-17 500 1 16.8 32.3 29.6 1.27 1.33 21.8 £3791 £47 CPA 10-9 980 2 8.5 16.2 14.9 1.27 1.33 27.7 £3898 £89

Pneumatic chain hoists with hook or integrated trolleysCapacities: 125 - 980kgs

Pneumatic chain hoists are characterised by high durability in a great number of industrialapplications. The robus but light weight housing allows aan easy transport.

Features include:

• Designed for operating pressures of 5 to 7 bar.• Rotating piston motor with 100 % duty rating and an unlimited number of starts for continuous operation.• Integrated limit switches for highest and lowest hook position as standard.• Self-adjusting automatic disc brake, maintenance-free.• Extremely sensitive control with emergency-stop for a precise positioning of the load.• Air release for brake as standard for models CPA 2-31, CPA 5-17 and CPA 10-9• Chain container as standard

Options:• Pressure regulator, manometer, lubricator and support.• ATEX version available on request.

Applications:Automobile and aircraft industries, shipyards, on ships and docks. Foundries, on-/offshore,paint factories and paint shops, refineries, oil depots, galvanizing. Printing, textile andfood industries, pulp, paper and cement mills. Glass and ceramic industries, wood workingindustries, chemical industries, heat treatment and power plants etc.

Technical specifications Model Capacity A A1 B C D F1 F2 K L M N Q1 Q2 kgs mm mm mm mm mm mm mm mm mm mm mm mm mm

CPA 1-13 125 292 410 21 20 16 90 120 103 57 120 50 142 183 CPA 2-10 250 292 410 21 20 16 90 120 103 57 120 50 142 183 CPA 2-31 250 457 483 25 24 26 130 180 146 102 114 54 162 181 CPA 5-5 500 324 410 14 24 14 90 120 103 57 120 50 142 183 CPA 5-17 500 457 483 25 24 26 130 180 146 102 114 54 162 181 CPA 10-9 980 457 508 27 28 28 130 180 165 83 135 25 162 181

*Values for 6.3 bar (flow pressure) and 2mtr control drop. Speeds will be reduced in case of longer control length. Hose length max. 12mtr.

Model CPA 1-13, CPA 2-10 & CPA 5-5 hose length maximum 12mtr. Model CPA 2-31, CPA 5-17 & CPA 10-9 hose length maximum 20mtr.

• 1/2 inch BSP air filter, regulator, and lubricator 4300006148 = £235. • 3/4 inch BSP air filter, regulator, and lubricator 4300006149 = £448.

To ensure faultless operation the compressed air supply must be filtered & lubricated.!Protection classification

II 3 GD c IIB T4(on request)



29

CPA ‘HEAVY DUTY’ PNEUMATIC CHAIN HOISTS

Model Capacity Lifting Lifting Lowering Hoist Weight Hook Push Geared Power Add. (SWL) in speed speed speed motor std. hook susp. geared travel travel H.O.L. kgs / with without with susp. @ trolley 18m/min 18m/min number rated load* rated 3mtr HOL of chain load load* falls m/min m/min m/min kW kgs £ £ £ £ £/per m

CPA 20-8 2000/1 7.4 9.9 11.0 2.6 121 £4859 £5258 £5346 £6672 £47 CPA 30-6 3000/1 6.0 9.9 13.0 3.2 121 £5056 £5477 £5541 £6858 £47 CPA 40-4 4000/2 3.7 5.0 5.5 2.6 140 £5312 £5714 £6021 £7115 £89 CPA 50-3 5000/2 3.4 5.0 6.0 3.0 140 £5329 £5729 £6035 £7131 £89 CPA 60-3 6000/2 3.0 5.0 6.5 3.2 140 £5697 £6097 £6321 £7500 £89 CPA 75-2 7500/3 2.0 3.3 4.3 3.2 - on request on request on request on request on request CPA 100-2 10000/4 3.4 5.0 6.0 2 x 3.0 - on request on request on request on request on request

Pneumatic chain hoists with hook or integrated trolleysCapacities: 2000 - 10000kgs

The conception is in accordance with the design of the model CPE. With 100% duty rating and an unlimited number of starts the model CPA is suitable for heavyduty applications. It is insusceptible to contamination, humidity and aggressive mediums fromthe outside. The hoists are composed of three main components which makes service easyand inexpensive.

Features include:

• Designed for operating pressures of 4 to 6 bar.• Robust rotating piston motor has an adjustable spring pressure brake that holds the load secure even in the event of an air failure.• The standard oil bath lubricated planetary gearbox is particularly smooth running and enables a low overall height.• High starting torque due to switching valves in the motor body.• Low noise emission due to large dimension silencer.• Sensitive control by means of 2 resp. 4 button pendant control with emergency-stop.• Up to 3000kgs on single fall giving a low overall height.• The 5-pocket load chain sheave, manufactured from wear resistant case hardening steel, is matched perfectly to the load chain to guarantee smooth and precise chain motion.• Drop forged suspension and load hooks.

Options:• Manual and pneumatic trolleys.• Rope control.• Stainless steel load chain.• ATEX version available on request.

*Values for 6 bar (flow pressure) air consumption with rated load 4.7 m3/min. CPA 100-2 : 9.4 m3/min.

• 1/2 inch BSP air filter, regulator, and lubricator 4300006148 = £235. • 3/4 inch BSP air filter, regulator, and lubricator 4300006149 = £448.

• Chain container to suit 10mtrs of chain = £60. • Chain container to suit 20mtrs of chain = £80.

Trolley specification

Capacity Size Beam Beam flange Curve Pneumatic Pneumatic flange width thickness minimum trolley trolley b t max travel speed motor kgs mm mm m m/min kW

2000 - 6000 A 98 - 180 27 2.0 18 0.55 2000 - 6000 B 180 - 300 27 1.8 18 0.55 7500 - 10000 B 125 - 310 40 1.8 - -

To ensure faultless operation the compressed air supply must be filtered and lubricated.!Protection classification

II 2 GD c IIB T4(on request)



CPV/F 400v ELECTRIC CHAIN HOISTS (400v 3Ph 50hz)

Electric chain hoist,

model CPV/CPVF,

with suspension lug or

integrated travel trolley


The new Yale electric chain hoist, model CPV/CPVF,combines modern design and technical innovation.

A robust construction makes the series a versatile toolfor industrial applications. Upper and lower limitswitches considerably extend the working life span ofthe slipping clutch, motor, and gearbox.

Features include:

• Load sprocket and chain guide can easily be inspected or removed, without disassembly of the complete unit.

• Designed to FEM 1Am.

• Main line contactor for increased safety.

• Duty cycle 50% ED for single speed.

• Electromagnetic spring pressure brake holds the load safely even in the event of power failure.

• The externally adjustable slip clutch is designed to guarantee a permanent connection between the load and the brake.

• Motor protected to IP 55 against ingress of dust and water jets.

• Standard operating voltage: 400v, 3Ph, 50hz.

• Increased operating safety through 42v low voltage control with encapsulated pendant control to IP 65.

• Suspension lug (as standard) for reduced headroom and easy integration into trolley applications.

• The oil bath lubricated gearbox contains case hardened helical cut gearing for smooth, low noise running, and enhanced lifetime.

• Fully compatible with the VTE/S range of trolleys.

HIGH PERFORMANCE

Supplied asstandard with

Lug suspensionpoint.

Pendants shownare for illustration

purposes only.Supplied as standardwith Telemecanique®

(See pg. 31).

Optional extras:

• Suspension hook.• Manual and electric trolleys.• Festoon cable system.• Stainless steel load chain.• Radio remote control.• Other operating voltages.• Thermal overload.

Spare partsare shown on

pages 198 - 201.*

125kgup to2t

30

Top hookavailable as

optional extra.




Falls 1 & 2 1 & 2 1 & 2 1 & 2 HOL 12m & 6m 30m & 15m 50m & 25m N/A N/A N/A N/A 80m & 40m Price As std. £62 £69 £276 Falls 1 & 2 1 & 2 1 & 2 1 & 2 HOL 10m & 5m 20m & 10m 40m & 20m N/A N/A N/A N/A 60m & 30m Price As std. £62 £69 £276

Falls 1 & 2 1 & 2 1 & 2 1 & 2 HOL N/A N/A N/A 12m & 6m 18m & 9m 24m & 12m 40m & 20m N/A Price As std. £71 £98 £241

HIGH PERFORMANCE

Model Capacity Chain Hoist Additional in kgs / size speed Lug Top Push *Geared Single speed Dual speed H.O.L number of d x p suspension hook trolley trolley 18 m/m 18/4.5 m/m per mtr chain falls (3mtr HOL) (3mtr HOL) (3mtr HOL) (3mtr HOL) (3mtr HOL) (3mtr HOL) mm m/min £ £ £ £ £ £ £

Type of suspension Electric trolley R1 & R2

CPV 1-8 125 / 1 4 x 12.2 8 £953 £964 £1050 £1180 £1594 £1745 £17 CPV/F 1-8 125 / 1 4 x 12.2 8/2 £1058 £1069 £1160 £1296 £1721 £1876 £19 CPV 2-8 250 / 1 4 x 12.2 8 £983 £994 £1080 £1210 £1624 £1775 £17 CPV/F 2-8 250 / 1 4 x 12.2 8/2 £1088 £1099 £1190 £1326 £1751 £1906 £19 CPV 5-4 500 / 2 4 x 12.2 4 £1063 £1074 £1189 £1316 £1707 £1851 £28 CPV/F 5-4 500 / 2 4 x 12.2 4/1 £1168 £1179 £1299 £1434 £1833 £1982 £30 CPV 5-8 500 / 1 5 x 15.1 8 £1185 £1196 £1286 £1431 £1872 £2012 £24 CPV/F 5-8 500 / 1 5 x 15.1 8/2 £1306 £1318 £1408 £1487 £1999 £2139 £26 CPV 10-4 1000 / 2 5 x 15.1 4 £1271 £1282 £1383 £1467 £1959 £2099 £43 CPV/F 10-4 1000 / 2 5 x 15.1 4/1 £1394 £1405 £1504 £1588 £2086 £2226 £45 CPV 10-8 1000 / 1 7.1 x 20.5 8 £1589 £1600 £1771 £1862 £2381 £2522 £33 CPV/F 10-8 1000 / 1 7.1 x 20.5 8/2 £1771 £1782 £1955 £2054 £2573 £2713 £35 CPV 20-4 2000 / 2 7.1 x 20.5 4 £1693 £1704 £1882 £1972 £2498 £2639 £60 CPV/F 20-4 2000 / 2 7.1 x 20.5 4/1 £1878 £1889 £2065 £2155 £2689 £2829 £62

Model - 06900003 06900004 06900005 06900006 06900007 06900014 06900015 06900016

CPV/CPVF 1-8CPV/CPVF 2-8 CPV/CPVF 5-4

CPV/CPVF 5-8CPV/CPVF 10-4

CPV/CPVF 10-8CPV/CPVF 20-4

}

}

}

Increased operatingsafety through 42v lowvoltage control.

Externally adjustableslipping clutch.Adjustment tool: 4300008856

Integrated limit switches,and easily removablechain sprocket & guide.

Encapsulated pendantcontrol and radio remotecontrol to IP 65.

Radio remote control

is available as an optional

extra. See page 36 for details.*Yale hoists and trolleys are not designed

for passenger elevation applications and

must not be used for this purpose.!

• All prices are based on standard 3 mtr HOL. *Geared travel trolley units add £10 per metre extra drop on hand chain.• Raincoats: Small/Medium (Pt. No. 4300007425) £105, Large (Pt. No. 4300007426) £135.

Spare parts for the CPV/F are shown on pages 198-201.*

LOAD CHAIN COLLECTORS

31

Model Net weight Net weight Net weight lug/top push electric trolley trolley** trolley*** kgs kgs kgs

Type of suspension*

CPV 1-8 24 39 47 CPV/F 1-8 25 40 48 CPV 2-8 24 39 47 CPV/F 2-8 25 40 48 CPV 5-4 25 40 48 CPV/F 5-4 26 41 49 CPV 5-8 26 41 49 CPV/F 5-8 27 42 50 CPV 10-4 28 43 51 CPV/F 10-4 29 44 52 CPV 10-8 58 77 84 CPV/F 10-8 59 78 85 CPV 20-4 63 82 89 CPV/F 20-4 64 83 90

*Weight for standard 3mtr hol.**Add 2.5kgs for geared travel trolley (VTG).***Add 2kgs for dual speed electric trolley (VTE/F).



CPE 400v ELECTRIC CHAIN HOISTS (400v 3Ph 50hz)

*******

HIGH CAPACITY

Chaincontainers

10 mtr**

£

20 mtr**

£

Model Capacity Falls Hoist (SWL) of speed Top Push Geared Single speed Dual speed load hook trolley trolley 11 m/min 11/2.8 m/min chain (3 mtr HOL) (3 mtr HOL) (3 mtr HOL) (3 mtr HOL) (3 mtr HOL) kgs m/min £ £ £ £ £

Type of suspension VTE/F electric trolleyAdditional

H.O.L.per mtr

£

CPE 16-8 1600 1 8 £2977 £3394 £3599 £3704 £3766 £47 £33 £35

CPE/F 16-8 1600 1 8/2 £3177 £3570 £3775 £3879 £3942 £49 £33 £35

CPE 20-8 2000 1 8 £3052 £3577 £3674 £3779 £3841 £47 £33 £35

CPE/F 20-8 2000 1 8/2 £3252 £3645 £3850 £3954 £4017 £49 £33 £35

CPE 25-5 2500 1 5 £3127 £3616 £3749 £3854 £3916 £47 £33 £35

CPE/F 25-5 2500 1 5/1.25 £3327 £3720 £3925 £4029 £4092 £49 £33 £35

CPE 30-5 3000 1 5 £3202 £3691 £3824 £3929 £3991 £47 £33 £35

CPE/F 30-5 3000 1 5/1.25 £3402 £3795 £4000 £4104 £4167 £49 £33 £35

CPE 32-4 3200 2 4 £3277 £3766 £3899 £4004 £4066 £89 £40 £42

CPE/F 32-4 3200 2 4/1 £3477 £3870 £4075 £4179 £4242 £91 £40 £42

CPE 40-4 4000 2 4 £3352 £3841 £3974 £4079 £4141 £89 £40 £42

CPE/F 40-4 4000 2 4/1 £3552 £3945 £4150 £4254 £4317 £91 £40 £42

CPE 50-2 5000 2 2.5 £3427 £3916 £4049 £4154 £4216 £89 £40 £42

CPE/F 50-2 5000 2 2.5/0.6 £3627 £4020 £4225 £4329 £4392 £91 £40 £42

CPE 75-2 7500 3 1.6 £4608 N/A £4827 £6121* £6285* £131 £40 £42

CPE/F 75-2 7500 3 1.6/0.4 £4764 N/A £5022 £7386* £7572* £133 £40 £42

CPE 100-2 10000 4 2.5 £7946 N/A £8211 £9248* £9384* £173 £79 £83

CPE/F 100-2 10000 4 2.5/0.6 £8389 N/A £8654 £9692* £9821* £175 £79 £83

The CPE series is a range of high quality products for professional applications. They are highly efficient and engineered for a long working life. The hoists are composed of three main component parts which makes servicing easy and inexpensive.

Features include:

• The standard, oil bath lubricated planetary gearbox is particularly smooth running and provides for a low overall height. • Low voltage control (42volt).

• The 5-pocket load chain sheave, manufactured from wear resistant case hardening steel is matched perfectly to the load chain to guarantee smooth and precise chain motion.

• Case hardened and zinc plated link chain. • The heavy duty squirrel cage motor has an adjustable spring pressure brake that holds the load securely even in the event of a power failure. • The motor is designed for high duty cycle. • Motor fitted with bimetallic thermal protection, used with low voltage control. • 400V, 3-phase, 50 Hz eurovoltage. • Motor protected to IP54, insulation class F.

*Single speed trolley @ 5 m/min - dual speed trolley @ 5/1.25 m/min.

**Chain containers shown are for linear metres of chain.

• The extra HOL quoted includes for both load chain and pendant control cable. • Extra pendant cable is available at £11 per metre. • For geared travel trolley units add £10 per extra metre drop of hand chain. • Load chain fitted to all models 11 x 31mm, article number 6109488. • Limit switch available as an optional extra.

ALL CPE’s up to 5 tonne SWL are built at our Prenton facility

and are normally available on a 2-3 day service.*

1.6t up to10t

32



CPS ELECTRIC CHAIN HOISTS (110v, 230v & 400v)

One biglittle hoist.It keeps lifting and lifting.

The CPS electric chain hoist lifts loads up to 250kgs - yet weighs from only 12kgs.

With an M4 high duty rating, the rugged new CPS electric chain hoist keeps liftingand lifting - up to 240 motor starts per hour. It’s easy to install and maintain,making it ideal for jib and light crane systems.

The CPS electric chain hoist is built to the highest standards (just like all Yaleproducts) and offers unequalled levels of build quality and reliability. Our two yearwarranty, repair and full after-sales service will allow you to recommend thisexcellent product with confidence.

Features and benefits include:

4 Easy installation and maintenance.

4 IP54 as standard.

4 48v Control voltage.

4 Overload protection device as standard.

4 10-pocket oblique-lay lift wheel for smooth chain operation, constant chain speed and reduced chain wear.

4 Optional impact-resistant chain container.

4 Gear train lifetime lubricated with non-oxidising grease.

4 Alloy load chain for smooth operation and maximum chain life.

4 Thermally protected hoist duty motor.

4 Dual braking system - D.C. plus regenerative.

4 Rugged cast aluminium alloy hoist frame.

4 5 : 1 factor of safety.

4 Small, compact design for commercial applications.

4 Rigid latch-style upper hook prevents tangling of power cord.

4 Hardened forged steel latch-style lower hook rotates 3600.

4 Totally enclosed non-ventilated hoist frame protects the motor from environmental contamination.

4 True vertical lift.

4 Precision bearings used in the hoist.

4 Two year warranty.

4 Designed and manufactured by Yale.

Model Capacity Supply Lifting ED Weight Price Add. (SWL) speed duty mtr HOL kgs m/min % kgs* £* £

CPS 110/1-4 125 110v 1ph 50hz 4 mpm 40 12 £777 £17 CPS 230/1-4 125 230v 1ph 50hz 4 mpm 40 12 £777 £17 CPS 400/1-4 125 400v 3ph 50hz 4 mpm 40 12 £777 £17 CPS 400/1-10 125 400v 3ph 50hz 10 mpm 40 12 £777 £17

CPS 110/2-2 250 110v 1ph 50hz 2 mpm 40 14 £853 £28 CPS 230/2-2 250 230v 1ph 50hz 2 mpm 40 14 £853 £28 CPS 400/2-2 250 400v 3ph 50hz 2 mpm 40 14 £853 £28 CPS 400/2-5 250 400v 3ph 50hz 5 mpm 40 14 £853 £28

*Standard 3 mtr HOL. • Load chain: 4 x 12mm.

•Chain bags are not inc. as standard. • Raincoat: (Article no. 4300013113), £110.

Clearance

dimensions

Rated a b c d e f g h j k l m n capacity mm mm mm mm mm mm mm mm mm mm mm mm mm 125kgs 14 103 21 22 159 98 276 53 75 76 225 150 375 250kgs 14 103 21 22 159 98 304 53 60 89 225 150 375

CC2063 3 £22 CC2064 6 £29 CC2065 12 £42 CC2066 24 £48 CC2067 36 £60

Chain bag Max. length of chain Price mtrs £

Only weighs12 kgs!!

Spare parts for the CPS are shown on pages 206 -207.*

125kgand

250kg

33



LODESTAR ELECTRIC CHAIN HOISTS (110v, 230v & 400v)

CM Lodestar,

electric chain hoistCapacities: 250 - 3000kgs

The Lodestar hoist is a tough and durableelectric chain hoist, designed to keep workingin the most arduous applications. This hoist isrecognised and proven within the hire industryas the number one hoist, where high duty,combined with long heights of lift are required.

From hook suspension in the rental industry totrolley mounted in a factory production line, theLodestar has a proven reputation as the solutionfor industrial strength lifting.

Standard operating voltage: 110v 1ph 50Hz, 230v 1ph

50Hz, and 400v 3ph 50Hz are all available ex-stock.


4 Tough lightweight aluminium alloy covers totally enclose the mechanical and electrical components providing protection and efficient heat dissipation. The design enables easy access for installation and service.

4 Adjustable upper and lower limit switches.

4 48v control, IP65 pendant as standard.

4 Thermal overload protection as standard.

4 FEM classification 2m (50% duty - 30 minutes continuoususe per hour).

4 Excellent closed height dimensions.

4 A lifetime lubricated gearbox contributes to exceptional service and maintenance characteristics.

4 Single phase hoist supplied with handles and 1mtr supply cable with Cee-Form plug.

4 3-phase single speed hoist motors are dual voltage.

4 Load hook with axial bearing.

4 Perfect for long heights of lifts, for example up to 50mtr on single fall units.

“Heavy duty...and more!”

Spare partsare shown on

pages 202 - 205.*

110v and 230v

electric trolleys are now

available ex-stock!*

250kgup to

3t

34



LODESTAR ELECTRIC CHAIN HOISTS (110v, 230v & 400v)

Hoist Type Article no. Lift height, mtrs Chain size, mm Price, £

C/F CCS-SF40 4300006868 12 6.3 £80 C/F CCS-SF80 4300006869 24 6.3 £110 C/F CCS-SF150 4300006870 45 6.3 £120 J-L / R / RT CCS-LF60 4300006867 18 / 9 / 5 7.9 £95 J-L / R / RT CCS-LF100 4300006862 30 / 15 / 10 7.9 £140 J-L / R / RT CCS-LF150 4300006863 45 / 22 / 15 7.9 £150 J-L / R / RT CCS-LF200 4300006864 60 / 30 / 20 7.9 £160 J-L / R / RT CCS-LF400 4300006866 120 / 60 / 40 7.9 £170

Model Operating Capacity Lifting Load chain Hoist Hook Push Geared Electric trolley Add. voltage / falls of speed depth x motor susp. trolley trolley 1 speed 2 speed H.O.L. load chain pitch per mtr kgs m/min mm kW £ £ £ £ £ £

C 230v 1ph 50Hz 250 / 1 8 6.3 x 18.9 0.37 £1416 £1500 £1583 £3206 N/A £23*

C 110v 1ph 50Hz 250 / 1 8 6.3 x 18.9 0.37 £1416 £1500 £1583 £3206 N/A £23*

F 230v 1ph 50Hz 500 / 1 4 6.3 x 18.9 0.37 £1454 £1552 £1621 £3240 N/A £23*

F 110v 1ph 50Hz 500 / 1 4 6.3 x 18.9 0.37 £1454 £1552 £1621 £3240 N/A £23*

J 230v 1ph 50Hz 500 / 1 8 7.9 x 21.7 0.75 £2001 £2187 £2287 £3762 N/A £26*

J 110v 1ph 50Hz 500 / 1 8 7.9 x 21.7 0.75 £2001 £2187 £2287 £3762 N/A £26*

L 230v 1ph 50Hz 1000 / 1 4 7.9 x 21.7 0.75 £1877 £2064 £2162 £3645 N/A £26*

L 110v 1ph 50Hz 1000 / 1 4 7.9 x 21.7 0.75 £1877 £2064 £2162 £3645 N/A £26*

LL 400v 3ph 50Hz 1000 / 1 8 7.9 x 21.7 0.75 £1747 £1963 £2033 £2476 £2624 £26*

LL2 400v 3ph 50Hz 1000 / 1 8/2.5 7.9 x 21.7 0.75 £1946 £2136 £2233 £2674 £2821 £26*

R 230v 1ph 50Hz 2000 / 2 2 7.9 x 21.7 0.75 £2148 £2266 £2441 £3903 N/A £48**

R 110v 1ph 50Hz 2000 / 2 2 7.9 x 21.7 0.75 £2148 £2266 £2441 £3903 N/A £48**

RR 400v 3ph 50Hz 2000 / 2 4 7.9 x 21.7 0.75 £1864 £2055 £2154 £2599 £2744 £48**

RR2 400v 3ph 50Hz 2000 / 2 4/1.3 7.9 x 21.7 0.75 £2063 £2256 £2353 £2797 £2942 £48**

RT 230v 1ph 50Hz 3000 / 3 1.33 7.9 x 21.7 0.75 £2751 N/A N/A £4468 N/A £67***

RT 110v 1ph 50Hz 3000 / 3 1.33 7.9 x 21.7 0.75 £2751 N/A N/A £4468 N/A £67***

NB. All the above prices are based on a standard 3mtr HOL excluding chain bag. For geared travel trolley units, please add £10 per

extra metre drop of hand chain.

*50mtr maximum HOL. **30mtr maximum HOL. ***20mtr maximum HOL - Please consult our sales team for longer heights of lifts.

New style weather proof jackets to suit C & F £65 (article no: 4300012954), to suit J, L, R & RT £80 (article no: 4300012953).

Model Lodestar Lodestar Lodestar Lodestar250 / 500 500 / 1000 2000 3000

Frame type A, B, C, F J, L, JJ R, RR RT

and AA and LL

A, mm 413 471 613 750B, mm 156 194 194 194C, mm 17 22 28 28D, mm 279 241 241 241F, mm 197 271 271 271H, mm 25 30 38 38J, mm 100 138 165 165L, mm 122 184 157 157M, mm 25 28 33 33P, mm 168 198 198 198AP, mm 235 271 284 319

Please call the sales team for technical specification on other

suspension types or visit: www.cmworks.eu

TECHNICAL DATA / PRICES NEW!!!!

*

35

CHAIN CONTAINERS

DIMENSIONS FOR HOOK SUSPENSION HOISTS



FESTOON SYSTEMS

RADIO REMOTE CONTROLS

Radio remote systems

The Yale range of radio remote controls are designed for most hoistingapplications. The modular range enables customised configuration formost applications.


4 Manufactured to EN13849 or Cat. 3 CE EN-954-1.

4 Ergonomic transmitter with two step push buttons.

4 Ergonomic, lightweight design that is simple and easy to use.

4 All standard voltages are available ex-stock.Call the sales

team forfurther details.*

Supply cable systems

The Yale festoon cable systems contain all the parts required to installyour power cable supply.


4 Galvanised track and supports.

4 System lengths from 3 to 30mtrs.

4 Simple and quick to install.

4 Supplied with flat form cable.

36

Support bracket.

Flat form cable.

Cable trolleywith towingarm.

Cableclamp.

Cable trolley.

Description Track length Flatform Joints Support End End stop Cable Price cable length brackets clamp trolley mtrs mtrs £ Kit 1 6 9 1 5 1 1 3 £272 Kit 2 9 14 2 7 1 1 5 £391 Kit 3 12 18 3 9 1 1 7 £503 Kit 4 15 23 4 11 1 1 9 £622 Kit 5 18 27 5 13 1 1 11 £734 Kit 6 21 32 6 15 1 1 13 £852 Kit 7 24 36 7 17 1 1 15 £965 Kit 8 27 40 8 19 1 1 17 £1262 Kit 9 30 45 9 21 1 1 19 £1301

*Prices shown are inclusive of flat form cable and are for the standard system with pendant fitted to hoist.

Model Article no. Functions 1/2 speed *Unit price Replacement fitted charger price £ £

MR06 (standard) 06600001 4 button Yes £893 £58 MR06-Hybrid (outdoor use) 4300006876 4 button Yes £1313 £188 TM70/1.13 4300007386 6 button Yes £2020 £188 TM70/2.13 - 8 button Yes £2071 £188

*Unit price shown includes fitting to the hoist and is inclusive of batteries and charger.• Weather pouches for handset c/w strap. To suit MR06 (4300013292) = £36 list. TM70 (4300013293) = £44 list.

MR06

TM70/1.13

TM70/2.13



VTE ELECTRIC TRAVEL TROLLEYS

VTE 1-A/B-18/U* 1000 18 0.18 58 - 180 180 - 300 19 0.90 113 19.5 £566 £914 VTE/F 1-A/B-18/U* 1000 18/4.5 0.18/0.06 58 - 180 180 - 300 19 0.90 113 25.2 £611 £1027

VTE 2-A/B-18/U* 2000 18 0.18 58 - 180 180 - 300 19 1.15 115 26.0 £677 £948 VTE/F 2-A/B-18/U* 2000 18/4.5 0.18/0.06 58 - 180 180 - 300 19 1.15 115 30.2 £737 £1095

VTE 3-A/B-11/U 3000 11 0.37 74 - 180 180 - 300 27 1.40 139 51.0 £775 £1126 VTE/F 3-A/B-11/U 3000 11/2.8 0.3/0.09 74 - 180 180 - 300 27 1.40 139 53.0 £849 £1218

VTE 5-A/B-11/U 5000 11 0.37 98 - 180 180 - 300 27 1.80 161 77.0 £819 £1209 VTE/F 5-A/B-11/U 5000 11/2.8 0.3/0.09 98 - 180 180 - 300 27 1.80 161 80.0 £903 £1244

*11 or 11/2.8 m/min travel speed available on request. • Low voltage control c/w 3mtr pendant.

Model Capacity Travel Motor Beam width Flange Minimum Closed Weight Price Price (SWL) speed thickness curve height without inc. L.V. A B radius controls controls kgs m/min kW mm mm mm m mm kgs £ £

Electric travel trolley, model VTE


Specially recommended for loads over 1000kgs, for transportingover long distances, and/or for frequent use. Suitable for almostall hoists with suspension hook, due to Yale’s universal shackleconnection.

Travel motor with worm gear transmission ensures smooth startand self braking - a separate motor brake is not required. Compact,robust frame with low overall height.

Motors protected to IP 55, operating voltage 400v 3ph 50Hz.

NOTE: These trolleys are not designed for passenger elevationapplications and must not be used for this purpose!

37

ELECTRIC HOIST CONSIDERATIONS....When assessing an electric chain hoist application it is advisable to consider the following:

EnvironmentIs the hoist to be used or stored outside?If the answer is yes, then consideration must be given to the level of protection provided. ie: acover to park the hoist under when not in use or a higher level of enclosure specification. Can thehoist be easily removed for storage when not in use?

Consideration given now to the environment/climatic conditions will save considerable down timeand maintenance costs later.

Power supplyIs there an adequate power supply available adjacent to the hoist location? What is the distance between hoist and supply?If there is, then is the supply suitable, ie: 400v 3Ph 50hz, 230v 1Ph 50hz, 110v 1Ph 50hz. Please specify others if different.In each case it is recommended that the supply cables and equipment are checked to ensure compatability and that the installation conforms tothe current UK and European standards.

AtmosphereThere are applications when equipment is required to work in hazardous areas such as petro chemicaland pharmaceutical plants. The user then has a duty to identify if there are gases or dust present inthe atmosphere which could potentially cause an explosion. In such cases the classification or zoningof the area must be undertaken by the user and suitable equipment obtained.

To learn more about hoists in explosive environments please contact Columbus McKinnon’s sales office and ask forthe new ATEX product catalogue. Tel: 01244 375375

If you have any doubts or questions regarding which electric hoist to purchase or the application you areusing it in please ask a member of the CMCO sales team prior to purchasing!

The ATEX range.New. Safe. Competent.

Photograph: A Yale CPS electric chain hoist leftoutside with no added protection.



UNIVERSAL JIB CRANES

Universal jib cranesCapacities: 125 - 2000kgs

Yale is now proud to offer a wide range of universaljib cranes with capacities from 125 to 2000kgs.

Based on a modular design concept, our newuniversal jib range has been designed andengineered to suit todays competitive market.

The jibs have a either 2700 or 3600 slew and as theyhave been designed using interchangeable parts. Allyou need to do is to decide upon your type, liftingcapacity, radius, and whether or not you require amanual or power slew and you are away. It reallycouldn’t be any simpler!

Standard specification: 4 Indoor use (normal environment).

4 A3 duty.

4 2700 or 3600 slew angle.

4 Push slew.

4 Fixed radius and heights.

4 Standard colour paint.

4 Resin bolt fixing to existing floor without intermediate base plate.

Hh

R

*Each jib is available with

a manual or powered slew

and with the option of an electric

pack for the hoist - see page 39.

Each jib base is designed for

fixing to existing concrete floors

with resin bolts. There is no need for

an extra adaptor plate!

We have 2 different types available:

• Over braced jib - beam section (270_OBB) Utilising a universal beam section for the jib arm provides the most cost effective solution and is the most popular jib crane in the range. This model has 2700 slew angle.

• Under braced jib - beam section (360_UBB) This model is used to give the maximum height of lift and has 3600 of continuous slew.

*

Close up of the gearboxon the underbraced jib.

Base plates and fixing bolts:All of our universal jib cranes are designed to be fixed directly to a good quality concrete floor using the resin bolt fixing kit, providing that theconcrete has a minimum thickness as specified for the bolt diameter and a minimum strength of 30 N/mm0. The base plate must be positionedon a solid floor slab and it is recommended that the bolts are a minimum of 20 x bolt diameter from the edge of the slab.

If the existing floor is not adequate then the jib crane can be fitted to a concrete foundation block with the foundation bolt fixing kit and anoptional bolt template. This block size assumes a ground bearing pressure of 100 KN/m2.

Resin bolts Foundation bolts

The suitability of the floor is the ultimate responsibility of the user.*EXISTING FLOOR

CONCRETE BLOCK

25mm Grout

38



UNIVERSAL JIB CRANES

Model Capacity Radius Underside height Overall height Manual slew Electric pack (R) mm (h) mm (H) price £ for a hoist £

OBB125/3 125 3000 2500 3200 £999 £88 OBB125/4 125 4000 2500 3200 £1023 £88 OBB125/5 125 5000 2500 3200 £1195 £88 OBB125/6 125 6000 2750 3600 £1628 £93

OBB250/3 250 3000 2500 3200 £999 £88 OBB250/4 250 4000 2500 3200 £1165 £88 OBB250/5 250 5000 2750 3600 £1593 £93 OBB250/6 250 6000 2750 3600 £1628 £93

OBB500/3 500 3000 2500 3200 £1141 £88 OBB500/4 500 4000 2750 3600 £1535 £93 OBB500/5 500 5000 2750 3600 £1802 £93 OBB500/6 500 6000 2750 3600 £2068 £93 OBB1000/3 1000 3000 2750 3600 £1488 £93 OBB1000/4 1000 4000 2750 3600 £1742 £93 OBB1000/5 1000 5000 3000 3800 £2389 £115 OBB1000/6 1000 6000 3000 3800 £2494 £115

OBB2000/3 2000 3000 2750 3600 £1762 £93 OBB2000/4 2000 4000 3000 3800 £2376 £115

OVER BRACED JIB - BEAM SECTION (270_OBB)

Model Capacity Radius Underside height Overall height Manual slew Powered slew Electric pack (R) mm (h) mm (H) price £ with inverter £ for a hoist £

UBB125/3 125 3000 3300 3510 £1464 £3134 £152 UBB125/4 125 4000 3300 3560 £1530 £3201 £152 UBB125/5 125 5000 3300 3660 £1789 £3460 £152 UBB125/6 125 6000 3700 4060 £2428 £3442 £154

UBB250/3 250 3000 3300 3510 £1464 £3134 £152 UBB250/4 250 4000 3300 3560 £1613 £3284 £152 UBB250/5 250 5000 3700 4060 £2389 £4303 £154 UBB250/6 250 6000 3700 4060 £2531 £4445 £154

UBB500/3 500 3000 3300 3660 £1555 £3226 £152 UBB500/4 500 4000 3700 4060 £2325 £4239 £154 UBB500/5 500 5000 3700 4060 £2665 £4579 £154 UBB500/6 500 6000 3700 4060 £2844 £4758 £154 UBB1000/3 1000 3000 3700 4060 £2264 £4179 £154 UBB1000/4 1000 4000 3700 4060 £2639 £4553 £154 UBB1000/5 1000 5000 4000 4460 £3747 £5914 £176 UBB1000/6 1000 6000 4000 4460 £4080 £6246 £176

UBB2000/3 2000 3000 3700 4060 £2602 £4516 £154 UBB2000/4 2000 4000 4000 4460 £3744 £5910 £176

UNDER BRACED JIB - BEAM SECTION (360_UBB)

ACCESSORIES

Capacity Radius Resin bolts Foundation bolts Restricted slew stops Electrical minimum floor type £ concrete type bolt 270_OBB 360_UBB slew limits thickness foundation on template 30 N/mm2 30 N/mm2

(R) (t) (w x t) £ £ £ £ £

125 3000 150 RA £28 1200 sq x 600 FA £25 £37 £55 £55 £73 125 4000 150 RA £28 1400 sq x 600 FA £25 £37 £55 £55 £73 125 5000 150 RB £37 1500 sq x 600 FB £32 £37 £55 £55 £73 125 6000 150 RC £54 1600 sq x 600 FC £37 £48 £68 £68 £73 250 3000 150 RA £28 1400 sq x 600 FA £25 £37 £55 £55 £73 250 4000 150 RB £37 1600 sq x 600 FB £32 £37 £55 £55 £73 250 5000 150 RC £54 1700 sq x 600 FC £47 £48 £68 £68 £73 250 6000 150 RC £54 1800 sq x 800 FC £47 £48 £68 £68 £73 500 3000 150 RB £37 1600 sq x 600 FB £32 £37 £55 £55 £73 500 4000 150 RC £54 1800 sq x 800 FC £47 £48 £68 £68 £73 500 5000 200 RD £136 1900 sq x 800 FD £98 £55 £68 £68 £73 500 6000 200 RD £136 2000 sq x 800 FD £98 £55 £68 £68 £73 1000 3000 150 RC £54 1800 sq x 800 FC £47 £55 £68 £68 £73 1000 4000 200 RD £136 2000 sq x 800 FD £98 £55 £68 £68 £73 1000 5000 200 RE £136 2200 sq x 1000 FE £98 £62 £83 £83 £73 1000 6000 200 RE £136 2400 sq x 1000 FE £98 £62 £83 £83 £73 2000 3000 200 RD £136 2200 sq x 1000 FD £98 £55 £68 £68 £73 2000 4000 200 RE £136 2300 sq x 1000 FE £98 £62 £83 £83 £73

39



YaleMtrac endless winchCapacities: 500 - 980kgs

The new YaleMtrac endless winch is versatile and suitable for unlimited applications. The rope is not connected which makes itcompact, light and very easy to handle. The unlimited rope lengthmakes unrestricted lifting heights and traction lengths possible.

40

YaleMtrac®ENDLESS WINCH (400v 3Ph 50hz)

NEWPRODUCT

Features and benefits:

• The robust, precisely machined housing of diecast aluminium ensures a low deadweight and outstanding rigidity.• Gearing and drive sheave of hardened steel.• Universal attachment of the winches by means of central 16 mm load pin or two M10 screws.• Group of mechanisms 1 Bm/M3 (1 Cm/M2 for 18 m/min) according to FEM.• All motors protected to IP 55 as standard.• Standard operating voltage: Euro voltage 400 V, 3Ph, 50 Hz alternatively 460 V, 3Phs, 60 Hz.• 24 V control voltage (except material transport control, stationary application – 42 V).• Phase monitoring (except material transport control, stationary application).• Hoist motor with thermal overload protection.• Certified by an independent inspection institute (DGUV).• Drive sheave and pressure rollers of special nitride steel with a surface hardness of approx. 70 HRC guarantee low wear of the components.• The fully-synthetic special oil ensures highest possible efficiency for quiet running characteristics, in a temperature range of -400 up to 700C.• Standardised components ensures easy access to all wearing parts.• Certified for passenger elevation applications in accordance with DIN EN 14492-1 by an independent inspection institute (DGUV).

Safety lowering mechanism

• In the event of a power failure, the electro-mechanical brake can be released manually in order to ensure safe and controlled lowering of the load.• Safe lowering is guaranteed by the integrated centrifugal force brake.

Flexible attachment points

• The winch can be suspended from acentral suspension point by means of a

load pin.• As an alternative, attachment points in the corners of the housing are available for flexible attachment of the winch with screws or pins.

Safety for passenger elevation

In accordance with the requirements of DIN EN1808, each winch used for passenger elevation must feature a safety system on an independentsafety rope. Yale offers two different safety catching devices for two common applications. Both types have been approved for passenger elevationand comply with standard DIN EN1808 “Safety requirements on suspended access equipment”. In addition, the catching devices have beencertified by an independent inspection institute (DGUV).

Overspeed safety catchingdevice (YOSL)

• This overspeed catching device is automatically tripped when the lowering speed exceeds 30m/min (0.5m/s).• The integrated clamping jaw mechanism of hardened steel stops the lowering movement of the system within a few centimetres.

Inclined position safety catchingdevice (YISL)

• This inclined position catching device is automatically tripped when the angle of the rope or the platform exceeds 50.• The integrated clamping jaw mechanism holds the rope and immediately stops the movement of the system.

For full technical specification andapplication details please contact thesales team for the comprehensiveYaleMtrac brochure or download viathe QR code.

*



DIMENSIONS (ALL MODELS)

D, mm 10.5E, mm 40F, mm 57G, mm 261H, mm 34J, mm 261K, mm 220L, mm 180M, mm 301N, mm 375O, mm 399

Model Capacity for rope dia. Price kgs mm £

YOSL6-8 500 8.4 £991YOSL6-8 600 8.4 £991YOSL8-9 800 9.0 £1079YOSL10-10 1000 10.2 £1129

41

YaleMtrac®ENDLESS WINCH (400v 3Ph 50hz)

NEWPRODUCT

WINCHES FOR MATERIAL TRANSPORT

Model Capacity Lifting Nominal Motor *Stationary application **Mobile application speed rope dia. Weight Price Weight Price kgs m/min mm kW kgs £ kgs £

YMT 5-9-M8 500 9 8.4 1.1 54 £3623 62 £4837 YMT 5-18-M8 500 18 8.4 2.0 54 £3899 62 £5060 YMT 6-9-M8 600 9 8.4 1.1 55 £3624 63 £4921 YMT 6-18-M8 600 18 8.4 2.0 55 £3899 63 £5129 YMT 8-9-M8 800 9 8.4 1.8 55 £4243 63 £5494 YMT 8-18-M8 800 18 8.4 3.6 56 £4518 64 £3784 YMT 10-9-M9 980 9 9.0 1.8 54 £4702 63 £5930 YMT 10-18-M9 980 18 9.0 3.6 56 £4931 64 £6621

*Incl. control voltage 400V, 3Ph, 50Hz, directly attached to the winch, pendant control with emergency-stop (3mtr control cable).**Incl. control cabinet with Integrated CE-connector, pendant control with emergency-stop (3mtr control cable). Panel supplied loose.

WINCHES FOR PASSENGER ELEVATION acc. to EN 1808

Model Capacity Lifting Nominal Motor Weight without Price speed rope dia. rope but inclusive of control cabinet kgs m/min mm kW kgs £

YMT 5-9-P8 500 9 8.4 1.1 72 £4849 YMT 5-18-P8 500 18 8.4 2.0 72 £5123 YMT 6-9-P8 600 9 8.4 1.1 73 £5056 YMT 6-18-P8 600 18 8.4 2.0 73 £5123 YMT 8-9-P9 800 9 9.0 1.8 73 £5254 YMT 8-18-P9 800 18 9.0 3.6 74 £5523 YMT 10-9-P10 1000 9 10.2 1.8 73 £5714 YMT 10-18-P10 1000 18 10.2 3.6 74 £6491

Incl. control cabinet with integrated CE-connector. Option: Emergency-stop and UP/DOWN buttons on control cabinet for controllingthe winch, pendant control with emergency-stop (3mtr control cable).

YOSL YISL

OVERSPEED SAFETY CATCHINGDEVICE - YOSL

Model Capacity for rope dia. Price kgs mm £

YISL5-8 500 8.4 £544YISL6-8 600 8.4 £544YISL8-9 800 9.0 £625YISL10-10 1000 10.2 £674

INCLINED POSITION SAFETY CATCHING DEVICE - YISL



YGK-E WIRE ROPE HOISTS (400v 3Ph 50hz)

Global King wire rope hoist,

model YGK-E


The Yale Global King wire rope hoists are builtfor the world market and combine over 130yrsof experience with the latest manufacturing andmaterials technology, design standards, and thebest quality components available.

All Yale Global King hoists are built to meet and exceedFEM 2m duty rating, providing long life in heavy applications.

The range extends from 1.6t to 15t as standard and comescomplete with a range of speed options to suit mostapplications.

The Yale Global King is CE certified and each unit is testedto 125% of the normal working load, prior to despatch.

Stocked at our German manufacturing facility, these units arereadily available. Please call our sales team on 01244 375375for further details.

Hoist motor & brake• High motor rating and duty cycles. • Protected to IP55, insulation class F• Motor located outside the rope drum, allowing cooling and serviceability.• Motor temperature control as standard.• Low maintenance brake, no adjustment necessary, protected to IP65.

Traction drive• Ideal handling characteristics, as two wheels are driven, one on each side of the frame. Trolley wheels mounted on lubricated, encapsulated ball bearings.• The cambered profile is suitable for parallel and inclined beam profiles.• Worm gear drive for smooth starting and stopping at two speeds.• Extremely low headroom.

Rope guide• Enclosed low wear rope guide made from reinforced polyamide.• The rope guide ensures correct alignment and tensioning of the rope through 3600 in order to avoid slack rope and subsequent damage to the rope.

Rope drive & bottom block• Optimised proportion of drum and wheel diameter for low wear and tear of the rope.• Flexible and long-life steel rope.• Easily accessible drum for quick rope exchange.• Robust bottom block made of glass reinforced polyamide.• Rotating and tiltable load hook trunnion style for easier load adjustment and positioning.

Rope fixation and rope change• The rope can be exchanged and maintained quickly due to three screwed rope clamps and an asymmetrical wedge socket. The open design allows easy maintenance.

Geared limit switches• The geared limit switch for the upper and lower hook position is conveniently located to allow ease of access, even when the hoist is installed and is protected by an aluminium gear case.

Adjustment to beam flange• Simple adjustment of the trolley to a wide range of beam flange widths by threaded spindle.

Overload protection device• The overload protection device prevents lifting excessive load.

Wire rope hoist features:

42



YGK-E WIRE ROPE HOISTS (400v 3Ph 50hz)


Model YGK-E.. 1.6-6/12 3.2-5/6 3.2-5/12 5-5/7 5-5/12 10-5/7 10-5/12 15-4/7 15-4/12

A (min.) mm 400 406 406 508 508 616 616 753 753 A (max.) mm 502 508 508 535 535 673 673 788 788 B mm 270 270 270 476 476 540 540 514 514 C (min.) mm 219 219 219 206 206 206 206 359 359 C mm 356 356 356 356 356 356 356 508 508 D mm 95 95 95 102 102 152 152 178 178 E (min.) mm 160 160 160 140 140 114 114 256 256 E (max.) mm 296 296 296 289 289 264 264 405 405 F (min.) mm 464 464 464 611 611 742 742 789 789 F (max.) mm 464 464 464 760 760 891 891 938 938 G mm 368 375 375 454 454 575 575 611 611 H mm 156 156 156 127 127 175 175 229 229 I mm 165 165 165 270 270 359 359 356 356 K mm 324 324 324 527 527 645 645 641 641 L mm 365 375 635 524 778 532 791 597 870 M mm 178 89 178 140 225 143 229 155 251 N mm 327 406 406 359 359 460 460 548 548 O mm 470 470 819 727 1060 765 1108 873 1241 P mm 149 149 149 120 120 159 159 178 178 Q mm 251 251 251 - - - - 171 171 R mm 76 156 156 238 238 302 302 368 368 S mm 35 35 35 35 35 51 51 45 45 T mm 23 34 34 43 43 55 55 69 69 U mm 25 36 36 43 43 56 56 77 77 V mm 27 37 37 46 46 66 66 76 76

Model YGK-E... 1.6-6/12 3.2-5/6 3.2-5/12 5-5/7 5-5/12 10-5/7 10-5/12 15-4/7 15-4/12

Article number 08700019 08700020 08700021 08700022 08700023 08700024 08700025 08700026 08700027 Capacity kgs 1600 3200 3200 5000 5000 10000 10000 15000 15000 Reeving - 2 4 4 4 4 4 4 4 4 FEM m 2m 2m 2m 2m 2m 2m 2m 2m 2m ISO - M5 M5 M5 M5 M5 M5 M5 M5 M5 Lifting height mtr 12 6 12 7.5 12 7.5 12 7.5 12 Rope diameter mm 6.4 6.4 6.4 9 9 12 12 15 15 Lifting speed m/min 6/1.15 5/1.3 5/1.3 5/1.3 5/1.3 5/1.3 5/1.3 4.5/1.0 4.5/1.0 Hoist motor kW 2.2/0.56 3.7/0.93 3.7/0.93 5.6/1.4 5.6/1.4 11/2.8 11/2.8 15/3.7 15/3.7 Hoist motor rpm 3000/750 3000/750 3000/750 3000/750 3000/750 3000/750 3000/750 3000/750 3000/750 Electric trolley travel speed @ 50Hz m/min 12/4 12/4 12/4 14/4.5 14/4.5 12/4 12/4 12/4 12/4 Electric trolley motor @ 50 Hz kW 0.20/0.06 0.37/0.17 0.37/0.17 0.37/0.17 0.37/0.17 0.56/0.19 0.56/0.19 0.75/0.25 0.75/0.25 Electric trolley motor U/min 1500/500 1500/500 1500/500 1500/500 1500/500 1500/500 1500/500 1500/500 1500/500 Beam width mm 219 - 356 219 - 356 219 - 356 206 - 356 206 - 356 206 - 356 206 - 356 206 - 356 206 - 356 Weight kgs 283 317 363 408 476 794 862 1284 1415

Please call our sales team for current prices and availability.

Separate control panels and otherbeam flange widths are availableupon request. Call for details.

4

43

*

Products

Yale Industrial

GmbHYGK

The

new

mon

orai

l tro

lley

hois

t

Download brochure via QR code.*



TKL/TKR CRANE WEIGHERS

Crane weighersMeasuring range: 0 - 12 tonnes

The new Tigrip crane weighers, TKL and TKR, are compact measuring devices for the weighing ofloads. The TKL model is the standard digital display unit and the TKR model comes complete with aradio remote control.

Use appropriate attachments like grade 8 forgings between the hook of the hoist or crane, the craneweigher, and the load. They are very simple and straight forward to use!

The crane weighers have a liquid crystal display (LCD), which can tare as well as show either the grossor the net load. It also indicates overload at 110% of the rated capacity and the status of the battery.

Model: TKL (standard unit)


4 High accuracy.

4 Lightweight design.

4 Easy-to-read display.

4 Easy to use.

4 Robust design.

4 Housing can be rotated 180°

4 Retains the peak value to memory.

4 The battery capacity provides for around 200 operating hours.

4 Automatic setting to zero when crane weigher is switched on.

4 Use of rechargeable batteries possible (external battery charger*).

4 Display of maximum weight (gross/net).

4 Display of measuring units at the load indicator.

4 Measuring units: kg, tonnes, lbs, and kN.

4 Automatic stand-by for a prolonged battery lifetime.

4 Simple change of batteries.

4 Warning, if batteries are low.

4 Overload warning.

Included in delivery of TKL:

4 Crane weigher.

4 4 x 1.5 V AA batteries.

4 Test certificate.

*NB. External battery charger is not supplied asstandard, but must be specified as an optional extra.

Model: TKR (remote control)

The TKR crane weigher can be operated by radio control. The displayedvalues can be taken off the remote control device and can be easilytransferred to a PC. The system can be combined with an easy-to-readdisplay. Several measured values can be totalled and saved.

TKR has the same features as the TKL model plus:

4 Remote control and data exchange via radio transmission.

4 USB interface.

4 Accumulation memory .

Included in delivery of TKR:

4 Crane weigher.

4 Remote control with display.


4 Test certificate.

4 PC cable.

4 User software.

4 Carrying case.

See opposite page for

full technical

specifications and

prices.*

44




Model Article Measuring Nominal Limit Braking Complete Accuracy Resolution Price number range load load load unit of the step weight end value (partition) tonnes tonnes tonnes tonnes kgs % kgs £

TKL 1.0 53908446 0 - 1 1 1.1 >4 3 0.1 0.5 £1162 TKL 2.0 53908448 0 - 2 2 2.2 >8 3.5 0.1 1 £1178 TKL 3.2 53908451 0 - 3.2 3.2 3.5 >13 6 0.1 1 £1256 TKL 5.0 53908453 0 - 5 5 5.5 >20 7.5 0.1 1 £1375 TKL 8.0 53908455 0 - 8 8 8.8 >32 10.5 0.1 2 £2057 TKL 12.0 53908457 0 - 12 12 13.2 >48 20 0.1 5 £2439

TKR 1.0 53908447 0 - 1 1 1.1 >4 3 0.1 0.5 £1956 TKR 2.0 53908449 0 - 2 2 2.2 >8 3.5 0.1 1 £1996 TKR 3.2 53908452 0 - 3.2 3.2 3.5 >13 6 0.1 1 £2040 TKR 5.0 53908454 0 - 5 5 5.5 >20 7.5 0.1 1 £2128 TKR 8.0 53908456 0 - 8 8 8.8 >32 10.5 0.1 2 £2768 TKR 12.0 53908458 0 - 12 12 13.2 >48 20 0.1 5 £3099

Technical data on TKL and TKR:

• Operation time, approximately 200 hours with 4 x 1.5V AA batteries.

• Temperature range when in operation -100C to +500C.

• Temperature range when in storage -200C to +700C.

• IP 54 protection.

• 20.5mm high LCD display (4.5 digits).

• Tare range is 100% of rated capacity.

• Overload warning at 110% of the rated capacity.

DIMENSIONS

Model TKL 1.0 TKL 2.0 TKL 3.2 TKL 5.0 TKL 8.0 TKL 12.0

TKR 1.0 TKR 2.0 TKR 3.2 TKR 5.0 TKR 8.0 TKR 12.0

A, mm 389 417 488 571 657 804

B, mm 356 379 441 514 588 709

C, mm 60 60 75 90 100 140

D, mm 110 110 125 160 180 260

E, mm 13 16 18 22 26 35

F, mm 20 25 32 40 49 45

G, mm 70 81 103 126 152 190

H, mm 128 136 140 148 158 176

J, mm 77.4 77.4 84.4 84.4 97.4 97.4

These units are supplied with replaceable AA batteries.As an option you may replace these for re-chargeable type.The new design allows for easy calibration and maintenance.!

TIGRIP ®

Crane weighers

TKL/TKR CRANE WEIGHERS

45



TZL/TZR LOAD INDICATORS

Load indicatorsMeasuring range: 0 - 100 tonnes

The new Tigrip load indicators, TZL and TZR, are compact measuringdevices for the weighing of loads. The TZL model is the standard digitaldisplay unit and the TZR model comes complete with a radio remotecontrol.

On account of their flexibility, these load indicators are suitable for amultitude of applications. Whether used as a conventional crane weigheror to measure forces, it is the economical choice for various applications.They are very simple and straight forward to use!

The load indicators have a liquid crystal display (LCD), which can tare aswell as show either the gross or the net load. It also indicates overloadat 110 % of the rated capacity and the status of the battery.

Model: TZL (standard unit)


4 High accuracy.

4 Lightweight design.

4 Easy-to-read display.

4 Easy to use.

4 Robust design.

4 Retains the peak value to memory.

4 The battery capacity provides for around 200 operating hours.

4 Automatic setting to zero when load indicator is switched on.

4 Use of rechargeable batteries possible (external battery charger*).

4 Display of maximum weight (gross/net).

4 Display of measuring units at the load indicator.

4 Measuring units: kg, tonnes, lbs, and kN.

4 Automatic stand-by for a prolonged battery lifetime.

4 Simple change of batteries.

4 Warning, if batteries are low.

4 Overload warning.

Included in delivery of TZL:

4 Load indicator.


4 Test certificate.

*NB. External battery charger is not supplied asstandard, but must be specified as an optional extra.

Model: TZR (remote control)

The TZR load indicator can be operated by radio control. The displayedvalues can be taken off the remote control device and can be easilytransferred to a PC. The system can be combined with an easy-to-readdisplay. Several measured values can be totalled and saved.

TZR has the same features as the TZL model plus:

4 Remote control and data exchange via radio transmission.

4 USB interface.

4 Accumulation memory .

Included in delivery of TZR:

4 Load indicator.

4 Remote control with display.


4 Test certificate.

4 PC cable.

4 User software.

4 Carrying case.

See opposite page for

full technical

specifications and

prices.*

TIGRIP ®

Load indicators

Shackles are not supplied

as standard. Please contact

our sales team for pricesand availability.

*

46



TZL/TZR LOAD INDICATORS


Model Article Measuring Nominal Limit Braking Weight Accuracy Resolution Price number range load load load without of the step shackles end value (partition) tonnes tonnes tonnes tonnes kgs % kgs £

TZL 1.0 53808323 0 - 1 1 1.1 >4 1.1 0.2 1 £1040 TZL 2.5 53808324 0 - 2.5 2.5 2.75 >10 1.7 0.2 1 £1087 TZL 5.0 53808325 0 - 5 5 5.5 >20 2.1 0.2 1 £1141 TZL 10.0 53808326 0 - 10 10 11 >40 3.9 0.2 10 £1196 TZL 20.0 53808327 0 - 20 20 22 >80 6.8 0.2 10 £1251 TZR 1.0 53808331 0 - 1 1 1.1 >4 1.1 0.2 1 £1638 TZR 2.5 53808332 0 - 2.5 2.5 2.75 >10 1.7 0.2 1 £1712 TZR 5.0 53808334 0 - 5 5 5.5 >20 2.1 0.2 1 £1712 TZR 10.0 53808333 0 - 10 10 11 >40 3.9 0.2 10 £1857 TZR 20.0 53808335 0 - 20 20 22 >80 6.8 0.2 10 £1901 TZR 35.0 53808336 0 - 35 35 38.5 >140 9.4 0.2 10 £3113 TZR 50.0 53808337 0 - 50 50 55 >200 14.4 0.2 10 £3549 TZR 100.0 53808338 0 - 100 100 110 >400 39.3 0.2 50 £9929

Technical data on TZL and TZR:

• Operation time, approximately 200 hours with 4 x 1.5V AA batteries. • Temperature range when in operation -100C to +500C.• Temperature range when in storage -200C to +700C. • IP 54 protection.• 20.5 mm high LCD display (4.5 digits). • Tare range is 100% of rated capacity.• Overload warning at 110% of the rated capacity.

DIMENSIONS

Model TZL 1.0 TZL 2.5 TZL 5.0 TZL 10.0 TZL 20.0 - - -

TZR 1.0 TZR 2.5 TZR 5.0 TZR 10.0 TZR 20.0 TZR 35.0 TZR 50.0 TZR 100.0

A, mm 190 233 250 325 378 405 450 640 B, mm 118 118 118 118 118 156 180 260 C, mm 14 22 27 48 55 66 76 100 D, mm 151 173 180 213 233 245 264 380 E, mm 12.5 19 21.5 22 32 47 55 80 F, mm 37 - - - - - - - G, mm 21 25 30.5 47 57 67 77 99 H, mm 38.4 42.2 45.1 64.4 74.2 84.2 94.2 113 J, mm 348 604 610 690 780 1000 1170 - K, mm 30 34 50 105 92 130 140 300 L, mm 26 38 44 95 95 114 132 238 M, mm 10 16 19 35 35 44 51 89 N, mm 25 25 32 50 70 110 115 - O, mm 23 23 37 63 80 123 132 - P, mm 17 17 28 44 57 90 97 - Q, mm 235 309 315 535 562 665 730 1240 R, mm 16 - - - - - - -

Load indicator.

Model TZL/TZR with shackle.

Load indicator.

Model TZL/TZR with hook. Load indicator.

Model TZL/TZR 2.5 up to 100t. Load indicator.

Model TZL/TZR 1.0t.

47



Yale believes in total commitment to safety awareness, resulting in a better working environment. Yale is dedicated to the understanding ofcustomers’ needs at all levels and offers a broad range of equipment designed with the exact end-user requirements. Yale’s comprehensiverange of safety products is manufactured under ISO9002 accreditation and meets all relevant European CE standards.

Whether you have already purchased Yale products or are a potential user, instructionand training is a requirement as stated in the Work at Height Regulations 2005.

The Working at Height Regulations 2005

Main points:

• Working at height, no longer means above 2 metres before PPE is required. The new regulations state “Where a person could fall a distance liable to cause personal injury”.

• Make sure you have done the following: i) Method statement ii) Risk Assessment • Have a rescue plan in place. Do NOT rely on the Emergency Services.

• Train people in the use of Fall Protection Equipment.

• Inspection of Fall Protection Equipment (keep records).

NB: This is only a brief description of the regulations. For a full copy visit: www.hse.gov.uk

It’s your life... it’s our reputation.

Fall Factors Calculating the potential fall distance:

When using a shock absorbing lanyard, it is important to understand how to calculate the potential fall distance to avoid contact with the lowerlevel. The calculation below gives the minimum fall distance between the anchorage point of the lanyard (Fall Factor 2) and the lower level.

This is calculated by allowing for:

• twice the length of the lanyard (to allow for the length of the lanyard and the height of the worker). • +1.75mtrs deceleration distance to allow for elongation of the shock absorber and any give in the lanyard. • +1 mtr safety margin. • TOTAL = 6.75mtr clearance required using a 2mtr lanyard.

Best option33 Acceptable3 Worst case!

FALL FACTOR - 0

FALL FACTOR - 1

FALL FACTOR - 2

2mtr lanyard

1.75mtr shock absorber

2mtr worker

1mtr safety margin

HEIGHT SAFETY PRODUCTS

48



HEIGHT SAFETY PRODUCTS

If you have a specific height safety requirement and the product you need is not shown in this price list, please callour sales team on: 01244 375375 and they may be able to offer you some more alternatives.*

CMHYP56

CMHYP56A

CMHYP10R

CMHYP70

CMHYPB70

Rescue harnessModel: CMHYP10R

Rescue harness with front andrear ‘D’ attachment points andwith added rescue anchoragepoint. Conforms to EN361.(Article: 37020011)

£40

Riggers harnessModel: CMHYP70

Five point full body harness.Conforms to EN361, EN358,and EN813. (Article: 37020070)

£147

Work positioningand sit harnessModel: CMHYPB70

Work positioning and sit harness.Conforms to EN358 & EN813.(Article: 4300006142)

£70

Four point quickconnect harnessModel: CMHYP56A

Four point full body harness c/wwork positioning belt c/w quickconnect buckles. Conforms toEN361/358. (Article: 37020005)

£110

Four point harnessModel: CMHYP56

Four point full body harnessc/w work positioning belt.Conforms to EN361 & EN358(Article: 37020050)

£84CMHYP10

CMHYP10XL

CMHYP35

CMHYP36A

CMHYP20

Two point harnessModel: CMHYP35

Two point full body harnesswith front & rear ‘D’ attachmentpoints. Conforms to EN361.(Article: 37020035)

£35

Two point quickconnect harnessModel: CMHYP36A

Two point full body harness.Front & rear ‘D’ attach. pointswith quick connect buckles.EN361. (Article: 4300006141)

£71

Three pointharnessModel: CMHYP20

Three point full body harness,with front ‘D’ and side ‘D’attachment points. Conforms toEN361/358. (Article: 37020020)

£55

Extra large singlepoint harness Model: CMHYP10XL

Extra large single point full body,harness, with rear ‘D’ attachmentpoint. Fits chest size up to 52”.EN361. (Article: 4300007639)

£30

Single point harnessModel: CMHYP10

Single point full body, entry levelharness, with rear ‘D’ attachmentpoint. Conforms to EN361.(Article: 37020010)

£27

49



FALL ARREST LANYARDS

ROPE WEBBING

Model: CMHABMT2 metre webbing lanyard c/w 2 x screw gateconnectors. (Article: 37220026).

Model: CMHABMTS1.5 metre webbing lanyard c/w 2 x screwgate connectors. (Article: 4300006111).

Model: CMHABMTscaff2 metre webbing lanyard c/w 1 x scaffoldhook and 1 x screw gate connector.(Article: 37220028).

Model: CMHABMTSscaff1.5 metre webbing lanyard c/w 1 scaffoldhook and 1 x screw gate connector.(Article: 4300006112).

Model: CMHABM2T2 metre twin tail webbing lanyard c/w 3screw gate connectors. (Article: 37220020).

Model: CMHABM2Tscaff2 metre twin tail webbing lanyard c/w 2scaffold hooks & 1 x screw gate connector.(Article: 4300006101).

Model: CMHABMLE1012 metre elasticated lanyard c/w 1 scaffoldhook and 1 x screw gate connector.(Article: 4300006109).

Model: CMHABMTC1.7 metre webbing lanyard. No connectors.(Article: 4300006110).

£33

£32

£50

£49

£46

£61

£41

£23

RESTRAINT

CMHABMLB101scaffCMHABM2Tscaff

*All lanyards conform to EN354 and EN355.

Model: CMHABMLB121

2 metre x 12mm rope lanyard c/w 2 screwgate connectors. (Article: 4300006103).

Model: CMHABMLB121S

1.5 metre x 12mm rope lanyard c/w 2 screwgate connectors. (Article: 4300006104).

Model: CMHABMLB121scaff

2 metre x 12mm rope lanyard c/w 1 scaffoldhook & 1 x screw gate connector.(Article: 4300006105).

Model: CMHABMLB121Sscaff

1.5 metre x 12mm rope lanyard c/w 1scaffold hook & 1 x screw gate connector.(Article: 4300006106).

Model: CMHABMLB102

2 metre x 12mm twin tail rope lanyard c/w 3screw gate connectors. (Article: 4300006107).

Model: CMHABMLB102scaff

2 metre x 12mm twin tail rope lanyard c/w 2scaffold hooks & 1 screw gate connector.(Article: 4300006108).

Model: CMHABMLB100-20

2 metre x 12mm adjustable lanyard c/w 2screw gate connectors. (Article: 4300008280).

£29

£28

£37

£36

£36

£60

£38

Model: CMHLB100 2 metre x 12mm restraint rope lanyardNO connectors, EN354. (Article: 4300006132). £20

Model: CMHLB121-10 1 metre x 12mm restraint lanyard c/w 2 screwgate snap hooks, EN354. (Article: 4300006134). £24

Model: CMHLB121-15 1.5 metre x 12mm restraint lanyard c/w 2 screwgate snap hooks, EN354. (Article: 4300006133). £25

Model: CMHLB121-20

2 metre x 12mm restraint rope lanyard c/w 2 screwgate snap hooks, EN354. (Article: 37220024) . £25

Model: CMHLB100-20 2 metre x 12mm adjustable restraint lanyard c/w 2screw gate snap hooks, EN354. (Article: 4300012503). £29Model: CMHLB100-20scaff 2 metre x 12mm adjustable restraint lanyard c/w1 x scaffold hook and 1 x screw gate snap hook,EN354. (Article: 4300008410). £40Model: CMHLB121-15scaff 1.5 metre x 12mm restraint lanyard c/w 1 x scaffold hook and 1 x screw gate snap hook,EN354. (Article: 4300008865). £36

50



FALL ARREST BLOCKS

£305

£313

£326

£347

£415

£478

£536

£184

£226

£72

Cable blocks 6 - 15 metre

Model: CMHCR2006 (Article: 37320006).6 metre fall arrest block with 4mm diameter cable. Fitted as standard with fall indicator in connector.




Cable blocks 20 - 28 metre




Webbing blocks

Model: CMHWR100-06 (Article: 4300013778).6 metre fall arrest block with 17mm wide webbing polyester - Kevlar fibres. Fitted as standard with fallindicator in connector. Lightweight 1.8kgs.

Model: CMHWR200-06 (Article: 4300006139).6 metre fall arrest block with 20mm wide webbing. Fitted as standard with fall indicator in connector.

Model: CMHAH210 (Article: 37320035).2.25 metre mini retractor with 45mm wide webbing. Fitted as standard with fall indicator in connector.

CMHCR20010

CMHAH210

51

*All fall arrest blocksconform to EN360.

CMHWR100



HEIGHT SAFETY KITSK

IT -

1K

IT -

2K

IT -

3

Construction (2) kitModel: CMHYP04 (Article: 37420004A).

Each kit contains:

1 x Two point harness.1 x 2.2 metre webbing retractor.1 x 600mm anchor sling.1 x Kit bag.K

IT -

4

CMHYP35 Harness

CMHYP10 Harness

CMHB

CMHB

All this foronly £50


Scaffolders kitModel: CMHYP03 (Article: 37420003A).

Each kit contains:

1 x Single point harness.1 x 2 metre shock absorbing rope lanyard.1 x Screw gate snap hook.1 x Scaffold hook.1 x Kit bag.

Basic kitModel: CMHYP02 (Article: 37420002A).

Each kit contains:

1 x Single point harness.1 x 2 metre shock absorbing rope lanyard.2 x Screw gate snap hooks.1 x Kit bag.


Restraint kitModel: CMHYP01 (Article: 37420001A).

Each kit contains:

1 x Single point harness.1 x 2 metre restraint rope lanyard.2 x Screw gate snap hooks.1 x Kit bag.

This kit is for RESTRAINT only. Not to be used for fall arrest.*

CMHLB121c/w 2 x CMHAZ011

CMHYP10Harness

CMHABMLB121c/w 2 x CMHAZ011

CMHYP10 Harness

CMHB


CMHABMLB121scaff

CMHAH210CMHAZ900060

CMHB

52



HEIGHT SAFETY KITSK

IT -

5K

IT -

6K

IT -

7K

IT -

8

Work positioning kitModel: CMHYP08 (Article: 37420008A).

Each kit contains:

1 x Four point harness.1 x 2 metre work positioning device.1 x 2.2 metre webbing retractor.1 x Kit bag.

Roofers kitModel: CMHYP07 (Article: 37420007A).

Each kit contains:

1 x Two point harness.1 x 20 metres of kernmantle rope.1 x Rope grab.2 x Screw gate snap hooks.1 x Shock absorber.1 x 600mm anchor sling.1 x Carrying case.

Crane maintenance kitModel: CMHYP06 (Article: 37420006A).

Each kit contains:

1 x Two point harness.1 x 2 metre twin tail shock absorbing

web lanyard.2 x Scaffold hooks.1 x Screw gate snap hook.1 x Kit bag.

Construction (3) kitModel: CMHYP05 (Article: 37420005A).

Each kit contains:

1 x Two point harness.1 x 10 metre fall arrest block.1 x 600mm anchor sling.1 x Carrying case.

CMHYP56 Harness

CMHYP35 Harness

CMHYP35 Harness

CMHYP35 HarnessCMHAZ900060

CMHAZ900060

CMHB

CMHAX322

CMHB

CMHAX322


CMHCR20010

CMHABM2Tscaff

All this for only£163

CMHAC010 & CMHAC101


CMHAF13002CMHAH210

All this for only£93

53

2 x CMHAZ011



TRIPODS

£504

Tripod (1.75mtr closed height)Model: CMHTM9

Tripod with a working load limit of 500kgs. Height tounderside 1340 - 2300mm. Footprint dia. 1.66 - 2.36mtr Net weight 14.3kgs. Conforms to EN795.(Article: 37320039).

£494

£520

WinchesWinches with automatic brake c/w mounting bracket, cable diameter6.3mm. With working load limit of 180kgs. Net weight 13kgs.Conform to EN1496.

Model: CMHRUP20 (20mtr option)(Article: 37320040).

Model: CMHRUP25 (25mtr option)(Article: 37320045).

£281

£310

Rescue descent deviceRescue descent device all complete with: Descent device, 11mm dia.working rope, 3 x snap hooks, webbing sling, knife and kit bag.

Model: CMHAR01030 (30mtr option)(Article: 4300006116).

Model: CMHAR01040 (40mtr option)(Article: 4300006117).

WINCHES

RESCUE

54



£65

£68

Model: CMHAF130-02

2 metre work positioning device c/w shortener. Conforms to EN358. (Article: 37220029).

Model: CMHAF130-04

4 metre work positioning device c/w shortener.Conforms to EN358. (Article: 37220030).

WORK POSITIONING

The Easylift tripod is a versatile, portable frame,designed to meet ‘The work at height’ regulation. Ithas been designed specifically for lifting manholecovers and working around open sumps, where aperson could fall into the sump.

The design allows for a pump to be lifted from asump in a safe manner and then simply slide it toone side for safe inspection. A fall arrest harnesscan also be attached to the frame which has beendesigned for single ‘man riding’.

The whole unit is manufactured out of lightweightaluminium and can be erected by a single user.Ideal for any company operating within the waterand wastewater industry.

Features/options include: 1. Single man riding point located under main beam. 2. Two fall arrest attachment points on main beam. 3. A built in spirit level. 4. Sliding load trolley. 5. Load locking pin to secure load trolley. 6. Each leg has 15 adjustment points and allows: • height range of 1475 to 2160mm. • width range from 2240 to 2560mm. • height range from 1000 to 1500mm. 7. Transport trolley available as optional extra. 8. Spreader beam, including c/w 3 different keys, allowing easy removal of manhole covers is also available as optional extra. 9. Mounting bracket for tripod leg that allows the CMHRUP20 or CMHRUP25 (shown right and on page 46) to be attached to the Easylift is available as an optional extra.

Model Article Weight Price number kgs £

Easylift0.5 4300008694 39 £3895 EL_trolley 4300008695 15 £499 EL_spreader TBA 7 £580 Winch mounting bracket 794351 5 £539

1

23

4

6

5

7

EASYLIFT LIGHTWEIGHT ALUMINIUM TRIPOD

8

55



HEIGHT SAFETY ACCESSORIES

£8

£15

£13

£15

£16

£18

£19

£15

£158

£7

£8

£11

£67

£54

£16

£17

£15

£16

CMHAZ011 Steel snap hook 18mm screw gate.Conforms to EN362. (Article: 4300006118).

CMHAZ011t Steel snap hook 18mm twist lock.Conforms to EN362. (Article: 4300006119).

CMHAZ017 Steel snap hook 25mm screw gate.Conforms to EN362. (Article: 4300006122).



CMHAZ12E Light alloy snap hook 20mm twist lock.Conforms to EN362. (Article: 4300006125).

CMHAZ014t Light alloy snap hook 25mm twist lock.Conforms to EN362. (Article: 4300006121).

CMHAZ023 Light alloy snap hook 60mm.Conforms to EN362. (Article: 4300008257).

CMHAT060 Adjustable door anchor beam 1415 x 150 x 100mm.Weight: 7 kgs. Conforms to EN795. (Article: 37320060).

CMHAZ90030 300mm webbing anchor sling.Conforms to EN795. (Article: 4300006128).



CMHAC010 Rope grab with shock absorber for use on 14mmkernmantle rope. Conforms to EN353-2. (Article: 37120010).

CMHAC100-20 20 metre x 14mm kernmantle rope.Conforms to EN1891. (Article: 37220100).

CMHB Yale height safety ruck sack. (Article: 37520001).

CMHAX322 Large plastic carry case 310 x 410 x 180mm.(Article: 37520002).

CMHAY201 Trauma strap. 1200mm working length.(Article: 4300006933).

CMHAY202 Trauma strap. 1050mm working length.(Article: 4300006934).

CMHB

CMHAX322

CMHAZ900060

CMHAT060

CMHAZ011CMHAY201

CMHAZ023

56



RATCHET LASHINGS

Model Article Description Permissible Webbing Webbing Colour Price number ratchet force width length LC daN mm mm £

ZGK-25-125-1 32100250 Cambuckle lashing 125 25 5000 Yellow £3.73

ZGR-25-250-2-SPH 34700240 Ratchet lashing with double J-hook 250 25 4000 Yellow £6.12



ZGR-50-2000-2-SPH 34702080 Ratchet lashing with double J-hook 2000 50 8000 orange £25.71


Ratchet Lashings

Yale ratchet lashings are made from high quality componentsand offer the following advantages:

• Light weight.

• Flexible.

• High-carrying capacities.

• Low-strain, wear-resistant, long-life strap material (100% polyester).

• Moisture-resistant fabric, thus eliminating frost damage, and at the same time providing largely decay-resistant properties.

• All of our ratchet lashings are heat set, stretched, PU-impregnated and in conform to EN12195-2.

• Cambuckle lashing.

• Ratchet lashing with double J-hook.

Yale ratchetlashings in use.

The items listed above are the most commonly requested sizes. If you can not see exactly what you arelooking for, please call our sales team and let us see if we can help you.*

57



FLAT WEBBING SLINGS

Effective Colour code / capacity / article number

working VIOLET GREEN YELLOW GREY RED BROWN length mtrs 1000kgs 2000kgs 3000kgs 4000kgs 5000kgs 6000kgs

1.0 £3.58 £5.38 £8.50 £11.00 - - 31101010 31102010 31103010 31104010

2.0 £5.68 £9.26 £10.86 £14.50 £28.00 £36.00 31101020 31102020 31103020 31104020 31105020 31106020

3.0 £7.47 £13.14 £15.35 £26.00 £33.00 £50.95 31101030 31102030 31103030 31104030 31105030 31106030

4.0 £9.56 £16.73 £22.00 £33.60 £42.00 £68.80 31101040 31102040 31103040 31104040 31105040 31106040

5.0 £11.95 £23.30 £25.00 £41.00 £52.50 £81.40 31101050 31102050 31103050 31104050 31105050 31106050

6.0 £14.34 £26.88 £30.00 £48.00 £67.50 £95.50 31101060 31102060 31103060 31104060 31105060 31106060

7.0 £17.00 £28.00 £33.80 £53.00 £72.00 £109.50 31101070 31102070 31103070 31104070 31105070 31106070

8.0 £29.00 £33.45 £38.00 £58.00 £79.00 £123.80 31101080 31102080 31103080 31104080 31105080 31106080

10.0 £36.00 £48.00 £58.00 £68.00 £88.50 £153.40 31101100 31102100 31103100 31104100 31105100 31106100

Branded bulk quantity orders can also be accommodated. Please call our sales team for details.*

1000 violet 1000 800 2000 1400 1000 1400 1120 1000 800

2000 green 2000 1600 4000 2800 2000 2800 2240 2000 1600

3000 yellow 3000 2400 6000 4200 3000 4200 3360 3000 2400

4000 grey 4000 3200 8000 5600 4000 5600 4480 4000 3200

5000 red 5000 4000 10000 7000 5000 7000 5600 5000 4000

6000 brown 6000 4800 12000 8400 6000 8400 6720 6000 4800

Capacity Colour WLL in kg with ONE Yale webbing sling WLL in kg with TWO Yale webbing sling code straight choke basket angle B straight lift angle B choke hitch angle B kgs lift hitch up to 70 70 - 450 450 - 600 70 - 450 450 - 60 70 - 450 450 - 60

FLAT WEBBING SLINGS - RATED CAPACITIES

58



ROUND SLINGS

Effective Colour code / capacity / article number

working VIOLET GREEN YELLOW GREY RED BROWN BLUE ORANGE length mtrs 1000kgs 2000kgs 3000kgs 4000kgs 5000kgs 6000kgs 8000kgs 10000kgs

0.5 £4.18 £5.29 £6.95 - - - - - 33101005 33102005 33103005

1.0 £5.04 £6.15 £10.61 £11.73 £14.95 £16.11 £18.33 £20.22 33101010 33102010 33103010 33104010 33105010 33106010 33108010 33110010

1.5 £6.98 £11.43 £14.70 £12.80 £17.46 £19.33 £22.01 £23.48 33101015 33102015 33103015 33104015 33105015 33106015 33108015 33110015

2.0 £7.41 £11.70 £15.30 £14.81 £20.10 £21.04 £28.85 £31.48 33101020 33102020 33103020 33104020 33105020 33106020 33108020 33110020

2.5 £9.00 £14.50 £16.80 £18.60 £22.50 £26.09 £31.48 £38.94 33101025 33102025 33103025 33104025 33105025 33106025 33108025 33110025

3.0 £10.95 £16.27 £17.33 £20.56 £25.70 £31.63 £37.48 £46.54 33101030 33102030 33103030 33104030 33105030 33106030 33108030 33110030

4.0 £14.58 £18.42 £22.16 £23.70 £34.13 £41.74 £49.57 £53.63 33101040 33102040 33103040 33104040 33105040 33106040 33108040 33110040

5.0 £18.50 £22.15 £25.33 £29.34 £38.02 £52.87 £63.39 £77.76 33101050 33102050 33103050 33104050 33105050 33106050 33108050 33110050

6.0 £21.33 £25.07 £31.00 £36.58 £46.70 £63.40 £76.22 £83.66 33101060 33102060 33103060 33104060 33105060 33106060 33108060 33110060

8.0 £25.00 £32.50 £62.27 £67.98 £72.73 £83.69 £103.67 £126.89 33101080 33102080 33103080 33104080 33105080 33106080 33108080 33110080

10.0 £28.00 £43.00 £75.63 £84.68 £91.27 £104.15 £129.18 £158.47 33101100 33102100 33103100 33104100 33105100 33106100 33108100 33110100

Branded bulk quantity orders can also be accommodated. Please call our sales team for details.*

Capacity Colour WLL in kg with ONE Yale webbing sling WLL in kg with TWO webbing slings code straight choke basket angle B straight lift angle B choke hitch angle B kgs lift hitch up to 70 70 - 450 450 - 600 70 - 450 450 - 600 70 - 450 450 - 600 70 - 450 450 - 600

ROUND SLINGS - RATED CAPACITIES

1000 violet 1000 800 2000 1400 1000 700 500 1400 1000 1120 800

2000 green 2000 1600 4000 2800 2000 1400 1000 2800 2000 2240 1600

3000 yellow 3000 2400 6000 4200 3000 2100 1500 4200 3000 3360 2400

4000 grey 4000 3200 8000 5600 4000 2800 2000 5600 4000 4480 3200

5000 red 5000 4000 10000 7000 5000 3500 2500 7000 5000 5600 4000

6000 brown 6000 4800 12000 8400 6000 4200 3000 8400 6000 6720 4800

8000 blue 8000 6400 16000 11200 8000 5600 4000 11200 8000 8960 6400

10000 orange 10000 8000 20000 14000 10000 7000 5000 14000 10000 11200 8000

59



HYDRAULIC SOLUTIONS

60

How to reach high forces in hydraulics?

Basic terms in hydraulics

Pressure

is the system pressure generated by the hand pump,

however, this can also be produced from an external

power source.

Force

is the pressure transferred by the hydraulic cylinder

proportional to the load up to the maximum capacity.

Stroke

is the piston rod travel distance to be achieved by the

relative force (no-load stroke, loaded stroke, return

stroke).

Piston travel speed

is the time taken for the piston rod of the hydraulic

cylinder to travel through a fixed distance.

Hydraulic cylinders

are available in different designs with two basic types.

SA=single acting and DA=double acting.

Hardened alloy steel saddle.

Metric mounting threadsin cylinder base, plungerand cylinder collar foruniversal fitting.

Wiper seal protectsagainst dirt ingress.

Stop ring prevents over-stroking of the piston atfull operating pressure.

Hard chromiumplated piston rod.

Piston rod and cylinderhousing are made ofchrome-molybdenum steeland are heat-treated formaximum strength.

Female coupler half, CFY-1, inc.dust cap fitted as standard.Bronze bearings minimize

friction even in cases ofeccentric loading.

Area x pressure = force

Effective x system = force

piston area pressure

cm2 x bar = daN

Example: Hydraulic cylinder YS10/...

14.3cm2 x 700bar = 10010daN

= 100kN

= 10ton

Linerar conversion of pressure force:

The above formulae shows that pressure forces can be

converted linearly.

Example: A 10ton cylinder presses at -

700bar - 100kN = 10t

350bar - 50kN = 5t

100bar - 14kN = 1.4t

1bar - 0.14 = 0.014t

Why hydraulics? Hydraulics, or fluid mechanics, offer extremely high forces with compact construction, which gives portable lifting, pushing and pulling power for

numerous applications. There is no other kind of power transmission that will provide comparable high forces with the same compact size.

Hydraulics tools The specialised design of hydraulic tools provides flexibility to engineers looking for a solution to lift, push or pull in general assembly and repair

jobs. The compact construction provides a versatile tool that is capable of being used in a number of universal applications.

The robsut construction of the Yale range of hydraulic cylinders have been designed to withstand the arduous conditions experienced in heavy

duty industrial applications. Depending on the application, the user can specify from a range of hand pumps, electrically powered pumps and

controls in 3 phase and single phase construction. Yale also offers a range of air powered pumps and petrol engined pumps where mains electricity

is not available.

Single-acting

The piston travel

is achieved via

hydraulic pressure

and returned by

spring force

(pressure build-up

in one direction

only).

Double-acting

The piston travel is

achieved via hydraulic

pressure in both

directions (push

forces and pulling

forces are possible

however, pulling

power will always be

lower due to the

available area of

the piston).



YS UNIVERSAL CYLINDERS YLS/YFS LOW PROFILE

YPL PULL CYLINDERS

Model Cylinder Oil vol. Stroke Closed Weight Price size max. height tonnes cm3 mm mm kgs £

YS 5/15 5 11 15 45 0.9 £125 YS 5/25 5 18 25 97 1.0 £148 YS 5/75 5 53 75 157 1.5 £165 YS 5/127 5 90 127 214 2.0 £185 YS 5/180 5 127 180 267 2.4 £210

YS 10/25 10 37 25 90 1.6 £160 YS 10/50 10 73 50 125 2.1 £182 YS 10/100 10 146 100 178 2.8 £199 YS 10/150 10 218 150 250 4.1 £220 YS 10/200 10 291 200 300 4.7 £240 YS 10/250 10 363 250 352 5.5 £298 YS 10/300 10 436 300 407 6.3 £330

YS 15/25 15 53 25 110 2.7 £210 YS 15/50 15 106 50 140 3.3 £231 YS 15/100 15 213 100 190 4.3 £262 YS 15/150 15 319 150 260 5.8 £280 YS 15/200 15 425 200 310 7.0 £315 YS 15/250 15 531 250 365 8.0 £365 YS 15/300 15 637 300 420 9.0 £395 YS 15/350 15 744 350 472 10.0 £436

YS 23/25 23 83 25 116 5.0 £247 YS 23/50 23 166 50 150 6.0 £255 YS 23/100 23 332 100 202 7.5 £295 YS 23/160 23 531 160 227 10.0 £314 YS 23/210 23 697 210 330 12.0 £367 YS 23/250 23 830 250 376 13.5 £425 YS 23/300 23 996 300 428 15.0 £499 YS 23/345 23 1145 345 477 16.5 £518

YS 30/125 30 552 125 245 13.0 £535 YS 30/200 30 884 200 325 17.0 £583

YS 50/50 50 355 50 170 15.0 £555 YS 50/100 50 709 100 220 19.0 £608 YS 50/160 50 1135 160 285 24.0 £629 YS 50/320 50 2269 320 460 37.0 £1086

YS 70/150 70 1478 150 285 32.0 £976 YS 70/330 70 3252 330 490 52.0 £1295 YS 100/100 100 1432 100 275 43.0 £1320 YS 100/200 100 2863 200 375 64.0 £1592

Single-acting with spring return,

5 to 100 tonnes, maximum operating pressure: 700 bar.

For all universal operations where high forces and compact dimensionsare required. Robust cylinder design, manufactured from chromium-molybdenum steel with hard chromium plated piston and large bronzebearings. Includes: saddle, mounting threads, and female coupler half.


YLS 10/35 10 51 35 86 2.5 £170YLS 20/45 20 128 45 100 4.0 £241YLS 30/60 30 266 60 120 6.5 £327YLS 50/60 50 426 60 122 10.4 £406YLS 100/55 100 788 55 141 24.0 £579

YFS 10/11 10 16 11 43 1.5 £180YFS 20/15 20 31 15 60 3.0 £270YFS 30/15 30 66 15 60 4.2 £341YFS 50/15 50 107 15 70 8.7 £352YFS 100/15 100 215 15 91 16.0 £577

Low height and flat cylinders. Single-acting with spring return,


Very compact hydraulic cylinders designed for general lifting andpositioning jobs as well as for all basic maintenance applications, wherehigh power, low height, portability, and light weight are required.Includes: female coupler half.

Model Cylinder Oil Stroke Length Weight Price size volume between max. links tonnes cm3 mm mm kgs £

YPL 10/150 10 220 150 750 9.0 £860YPL 20/150 20 440 150 795 22.0 £1066YPL 30/150 30 670 150 875 29.0 £1440YPL 50/150 50 1064 150 955 59.0 £2528



Yale pull cylinders are able to create extremely high pulling forces andcan be controlled precisely by the use of hand pumps or power packs.In neutral position, pull cylinders are fully extended. As soon as thecylinders are pressurised, the forged links are drawn together.

A built-in return spring extends the piston again, as soon as thepressure is released.

61



Model Cylinder Capacity Stroke Closed Weight Price size height tonnes kN mm mm kgs £

YH 5/30 5 50 30 160 2.5 £255YH 5/80 5 50 80 210 3.3 £281YH 5/150 5 50 150 280 4.4 £286

YH 10/30 10 100 30 175 4.0 £304YH 10/80 10 100 80 225 5.0 £320YH 10/150 10 100 150 295 6.7 £379YH 10/250 10 100 250 395 9.0 £434

YH 20/50 20 200 50 195 7.0 £434YH 20/150 20 200 150 310 11.0 £610YH 20/250 20 200 250 410 14.0 £740

YH 30/200 30 300 200 325 19.0 £751YH 30/350 30 300 350 510 27.0 £798

YH 50/150 50 500 150 325 27.0 £798YH 50/350 50 500 350 525 42.0 £1210YH 50/500 50 500 500 685 52.0 £1560

YH 70/150 70 700 150 335 370 £1398YH 70/350 70 700 350 540 56.0 £1860

YH 100/50 100 1000 50 265 49.0 £1371YH 100/150 100 1000 150 365 64.0 £1820YH 100/350 100 1000 350 565 94.0 £2477YH 100/500 100 1000 500 725 118.0 £3030

YH 200/150 200 2000 150 410 137.0 £3030YH 200/350 200 2000 350 620 198.0 £4586YH 200/500 200 2000 500 780 244.0 £6420

Double-acting with hydraulic return,

5 to 200 tonnes, max. operating

pressure: 700 bar

Double-acting cylinders with highretraction speed. The powerfulreturn of the piston, the extra longpiston bearings, and the high-gradematerial make these cylindersextremely robust and suitable for thetoughest of jobs.

Includes: saddle, mounting threads,and two female coupler halves anddust caps.

Model Cylinder Pull Stroke Centre Weight Price size capacity hole dia. tonnes kN mm mm kgs £

YCS 12/40 12 120 40 20 3.5 £320YCS 12/75 12 120 75 20 4.5 £335YCS 21/50 21 214 50 27 8.5 £492YCS 21/150 21 214 150 27 15.0 £770YCS 33/60 33 335 60 33 12.0 £661YCS 33/150 33 335 150 33 21.0 £962YCS 57/70 57 567 70 42 25.0 £1069YCS 62/150 62 618 150 55 38.0 £1539YCS 93/75 93 930 75 80 55.0 £2152



Due to the centre hole design, a threaded rod can be placed throughthe hollow cylinders, so that extremely high pulling forces can beachieved. This allows applications, such as pre-stressing of anchorbolts, removal of axle bushings, extracting tubes or for general heavyduty pulling jobs. Includes: saddle, mounting threads, and femalecoupler half.

Model Capacity Oil Clsd. Ctr. O/S Wgt. Price

Capacity (t) kN volume height hole dia.

stroke (mm) push pull cm3 mm mm mm kgs £

YCH 33/150 335 180 716 310 33 114 19 £1251 YCH 33/250 335 180 1200 415 33 114 25 £1382 YCH 62/250 618 300 2220 452 55 163 55 £2186 YCH 93/250 930 450 3320 465 55 193 82 £3057 YCH 100/40 1000 500 578 190 55 200 38 £2210 YCH 140/250 1400 700 4080 383 80 253 115 £3198

Double-acting with hydraulic return,


Due to the centre hole design a threaded rod can be placed throughthe hollow cylinders so that extremely high pulling forces can beachieved for applications such as pre-stressing of anchor bolts,removal of axle bushings, extracting tubes and with puller sets forgeneral heavy duty pulling jobs.Includes: saddle, mounting threads and female coupler half.

These extremely robust double-acting cylinders are specially designedfor universal heavy duty lifting and positioning applications, as well asfor industrial production and assembly jobs. The cylinders offer highpushing and pulling forces.

The double-acting design assures a high piston retraction speed. Majorareas of application are bridge building and civil engineering,off-shore,ship building, etc.

They can also be used as power source in frame presses, stampingfixtures, and other high-cycle industrial uses where pushing and pullingforces are required.

YCS HOLLOW CYLINDERS

YCH HOLLOW CYLINDERS

YH UNIVERSAL CYLINDERS

62



YEL CYLINDERS AYS/H ACCESSORIES


YEL 30/50 30 221 50 169 10.0 £399YEL 30/100 30 442 100 219 13.0 £458YEL 30/150 30 663 150 265 17.0 £490

YEL 50/50 50 355 50 185 19.0 £579YEL 50/100 50 710 100 235 25.0 £672YEL 50/150 50 1063 150 285 30.0 £730

YEL 93/50 93 663 50 200 37.0 £810YEL 93/100 93 1327 100 250 46.0 £940YEL 93/150 93 1989 150 300 57.0 £1180

YEL 140/50 140 1005 50 210 60.0 £1180YEL 140/100 140 2010 100 260 74.0 £1322YEL 140/150 140 3015 150 310 88.0 £1487

YEL 220/50 220 1570 50 245 117.0 £1690YEL 220/100 220 3140 100 295 165.0 £2183YEL 220/150 220 4710 150 345 189.0 £2640

YEL 340/50 340 2453 50 275 184.0 P.O.A.YEL 340/100 340 4906 100 345 229.0 P.O.A.YEL 340/150 340 7360 150 395 264.0 P.O.A.

YEL 430/50 430 3078 50 335 296.0 P.O.A. YEL 430/100 430 6157 100 358 340.0 P.O.A.YEL 430/150 430 9232 150 435 385.0 P.O.A.

YEL 560/50 560 4019 50 345 390.0 P.O.A.YEL 560/100 560 8038 100 425 481.0 P.O.A.YEL 560/150 560 12058 150 475 535.0 P.O.A.

YEL 670/50 670 4809 50 395 545.0 P.O.A.YEL 670/100 670 9621 100 445 614.0 P.O.A. YEL 670/150 670 14425 150 495 683.0 P.O.A.

YEL 880/50 880 6280 50 400 714.0 P.O.A. YEL 880/100 880 12560 100 505 901.0 P.O.A.YEL 880/150 880 18840 150 555 990.0 P.O.A.

YEL 1100/50 1100 7949 50 440 969.0 P.O.A.YEL 1100/100 1100 15896 100 545 1201.0 P.O.A. YEL 1100/150 1100 23845 150 595 1310.0 P.O.A.

Hydraulic cylinders with safety

lock nut.

Single-acting, 30 to 1100 tonnes

Max. operating pressure: 700 bar

Hydraulic cylinders with safety locknut are recommended when loadshave to remain in the raised positionover a period of time. The safetylock nut ensures a positive load holdin any position and work can becarried out beneath the raised load.Hydraulic pressure can be releasedso that cylinders work likemechanical supports. Pumps canbe separated from cylinders.

Model Description Suitable Weight Price for kgs £

AYS-10 Lifting claw, max 5t YS10/.... 0.9 £60 AYS-15 Lifting claw, max 8t YS15/.... 1.3 £75 AYS-23 Lifting claw, max 12t YS23/.... 3.8 £79

AYS-53 Base adaptor, 5t YS5/.... 0.5 £36 AYS-54 Ext. tube, 125mm, 5t YS5/.... 0.9 £28 AYS-55 Ext. tube, 250mm, 5t YS5/.... 1.5 £34 AYS-56 Ext. tube, 500mm, 5t YS5/.... 2.8 £36

AYS-103 Base adaptor, 10t YS10/.... 0.7 £35 AYS-104 Ext. tube, 125mm, 10t YS10/.... 1.2 £42 AYS-105 Ext. tube, 250mm, 10t YS10/.... 2.2 £45 AYS-106 Ext. tube, 500mm, 10t YS10/.... 3.9 £58 AYS-107 Ext. tube, 750mm, 10t YS10/.... 5.9 £65

AYS-153 Base adaptor, 15t YS15/.... 0.9 £43 AYS-154 Ext. tube, 125mm, 15t YS15/.... 1.6 £50 AYS-155 Ext. tube, 250mm, 15t YS15/.... 2.9 £55 AYS-156 Ext. tube, 500mm, 15t YS15/.... 4.9 £65 AYS-157 Ext. tube, 750mm, 15t YS15/.... 7.9 £80

AYS-102 Piston plate, round YS10/.... 1.5 £55 AYS-152 Piston plate, round YS15/.... 1.8 £58 AYS-232 Piston plate, round YS23/.... 2.2 £62

AYS-101 Support base plate YS10/.... 10.5 £281 AYS-151 Support base plate YS15/.... 10.5 £288 AYS-231 Support base plate YS23/.... 10.5 £301

YH5/30 YH5/80 YH5/150

YH10/30 YH10/80 YH10/150 YH10/250

YH20/50 YH20/150 YH20/250

Lifting claws

In conjunction with the correspondinghydraulic cylinder, a lifting clawrepresents a compact, lightweight,and versatile lifting unit.

Piston plates

Can be screwed into the pistonthread of cylinders. They reducesurface pressure and prevent thepistons from sinking into the ground.

Base adaptors

The use of extension tubes adds tothe versatility of the standard cylinders.

Support plates

Used to spread the load, theyprotect the cylinders from tippingor sinking into the ground.

Clevis eye mountings

Screwed onto the piston and bottomof the hydraulic cylinder, in thosecases where conditions requirepivoting of the cylinder.

AYH - 5-1 Cylinder base 0.3 £44 AYH - 5-2 Piston 0.3 £37



63



HPS/H HAND PUMPS

FPS FOOT PUMP

HH/C HYDRAULIC HOSES

GGY/A GAUGES

700 bar foot pump

Used to operate single-actinghydraulic cylinders, especiallyfor repeated applications, suchas checking of welding samples,pressing of connectioncomponents (crimping),actuating clampingdevices, as well as for applications, where it isnecessary to keephands free.

Model Hose Width Maximum Price length pressure mtrs mm bar £

Durable, yet highly flexible thermoplastichydraulic hoses guarantee a very longservice life. High safety factor, with a burstpressure of 2800 bar.

• Connections 3/8 NPT.• Hose Oil Volume: 35cm3 per metre.• Male coupler half is not supplied as standard with the hoses.

Please order CMY-1 Separately.

• Female coupler, CFY-1.

Model Reservoir Displacement Weight Price capacity cm3 cc kgs £

HPS 1/0.7 700 Single Stage 7.0 £230

HPS 2/0.3 300 Two Stage 3.5 £255

HPS 2/0.7 700 Two Stage 7.0 £281

HPS 2/2 2000 Two Stage 10.0 £311

HPS 2/4 4000 Two Stage 13.0 £379

HPS 2/6.5 6500 Two Stage 21.0 £444

HPS 2/10 10000 Two Stage 27.0 £585

HPH 2/0.7 700 Two Stage 8.0 £496

HPH 2/2 2000 Two Stage 11.0 £515

HPH 2/4 4000 Two Stage 14.0 £572

HPH 2/6.5 6500 Two Stage 22.0 £640

HPH 2/10 10000 Two Stage 28.0 £790

HPS - Single acting cylinders

HPH - Double acting cylinders

All steel construction for durableuse and high efficiency pumpingaction.

Includes: hydraulic oil, carryinghandle, reservoir ventilationplug, and many more features.

Maximum operating pressure:700 bar.

Model Reservoir Displacement Weight Price capacity 1. stage 2. stage cm3 cm3 cm3 kgs £

FPS-2/0.5 500 11 2 7.0 £570

CMY-1 - - 700 £15 CFY-1 - - 700 £17 HH - 10 1 6,3 700 £33 HH - 20 2 6,3 700 £41 HH - 30 3 6,3 700 £49 HH - 40 4 6,3 700 £58 HH - 60 6 6,3 700 £82 HH - 80 8 6,3 700 £105 HH - 100 10 6,3 700 £125

Model Description Dia. Range Oil Price mm Bar Port £

GGY-631 Pressure gauge 63 0-1000 G1/4 £29 GGY-1001 Pressure gauge 100 0-1000 G1/2 £96

GYA-63 Pressure gauge set 63 0-1000 G1/2 £72 GA-701 Press. gauge adapt. N/A N/A G1/2 £28 GA-703 Press. gauge adapt. set N/A N/A G1/2 £35

GGY pressure gauges

For use when the operating pressure(the force of the connected cylinder)needs to be monitored. To absorbshock loading, these Yale gaugesare glycerine filled. Also availablecalibrated as an optional extra.

GYA pressure gauge set

Suitable for connection to all HPShand pumps. Assembled and readyto use. Consists of pressure gaugeand corresponding gauge adaptor.

Pressure gauge adaptor

This pressure gauge adaptor is suit-able for connection to all HPS handpumps. Gauge connection withsleeve nut and 300 angle for easyreading.

Pressure gauge adaptor set

This pressure gauge adaptor set issuitable for connection to all HPHhand pumps (double acting cylinders).

64



PY ‘PORTABLE’ HYDRAULIC POWER PUMPS

PY-04/2/5/2 M single-acting manual 6.5 0.35kw - 230V, 1Ph 4.0 0.23 24.0 £1778 PY-04/2/5/4 M double-acting manual 6.5 0.35kw - 230V, 1Ph 4.0 0.23 24.0 £1885 PYE-03/3/10/3 M single-acting manual 10 0.35kw - 400V, 3Ph 0.3 0.3 35.0 £1810 PYE-03/3/10/4 M double-acting manual 10 0.35kw - 400V, 3Ph 0.3 0.3 35.0 £1830

•110v models are also available. Please call the Yale sales team for details.

Portable hydraulic power pumps

Light-weight, yet powerful two-stage pumps, are specifically designed for maintenance andrepair jobs.

Operating pressure max. 700 bar, two-stage design, motor start is via a remote pendantcontrol (1.8m) with push-button operation low voltage control.

Displacement no load under load l/min l/min

Model For Control valve Reservoir Motor Weight Price cylinder operation litres kgs £

Model Pressure Design Oil port Oil port Width Dimensions Weight Price maximum type cylinder side pump side length width height bar A B mm mm mm mm kgs £

VSM-11 700 needle 3/8-18 NPT outer 3/8-18 NPT inner 6 75 25 100 0.9 £155

VSM-21 700 needle 3/8-18 NPT inner 3/8-18 NPT outer 6 75 25 100 1.0 £177 VHM-1 700 needle 3/8-18 NPT inner 3/8-18 NPT inner 6 70 28 88 0.4 £54 VHM-2 700 ball 3/8-18 NPT inner 3/8-18 NPT inner 6 83 45 61 0.9 £72

VSM safety-check valves

These safety-check valves are used forthose applications where pressuredrops (eg holding of a raised load)must be avoided.

VHM throttle-/Shut off valves

These valves are used to shut-offhydraulic lines especially in multiplecylinder systems. The needlevalve VHM-1 also allows youto throttle an oil flowespecially within liftingapplications

VPR pressure relief valves

Pressure relief valves are usedwhen the system pressure (forceof the connected hydrauliccylinder) should not exceeda certain value.

VPS pressure switch

This precision adjustable pressureswitch can be set to any pressurevalue between 5 and 700 bar bymeans of a screwed adjuster. When thepreset pressure value is reached, anelectrical contact is activated.

Model Control range Oil ports Max. oil flow Dimensions in mm Weight Price bar P T I/min length O kgs £

VPR-1 0 - 700 3/8-NPT 1/4-NPT 10 120 40 0.8 £88 VPR-3 0 - 700 3/8-NPT 1/4-NPT 5 145 40 1.2 £105 VPR-6 0 - 700 3/8-NPT 1/4-NPT 16 185 47 2.2 £251

Model Pressure range Electrical Oil port Difference of Repeat Dimensions Weight Price bar data switch point accuracy bar bar mm kgs £

VPS-1 5 - 700 5A / 250V 3/8 NPT 25-70 10 130 x 85 0.5 £182

Pressure Switch

Pressure relief valves

Safety-check valves, throttle-/shut off valves

Supplied complete with pendant control!

*

VSM/VHM/VPR/VPS VALVES & PRESSURE SWITCH

65



MY MANIFOLDS (700bar)

Model Capacity Piston Maximum Maximum Weight Price stroke arm reach diameter tonnes mm mm mm kgs £

BMZ - 6 6 82 160 200 4.9 £359 BMZ - 8 8 82 200 250 6.6 £399 BMZ - 11 11 82 230 280 8.0 £443

Model Capacity Hydraulic Hand Hydraulic Stroke of Maximum Maximum Weight Price cylinder pump hose cylinder arm reach diameter tonnes model model model mm mm mm kgs £

Puller set with separate hydraulic components - 10, 15, and 23t

Hydraulic pullers are an invaluable tool for the maintenance engineer. The pullers provide time andcost savings, as they offer a high level of working safety and can be operated in all positions.

Hydraulic pullers are used in all kinds of industries, workshops, and in many repair and assemblyjobs to remove or install interference fit parts, such as: gears, couplings, bearings, wheels, pulleys,axles, shafts, brake drums, and many other press fit components.

BMZ - 1000 10 none none none - 300 350 9.5 £165 BMZ - 1010 10 YS-10/150 HPS-2/0.7 HHC-20 150 300 350 21.5 £810



Puller set with integrated hydraulic pump - 6, 8 and 11 tonnes

Hydraulic pullers are an invaluable tool for the maintenance engineer. The pullers provide time and cost savings,as they offer a high level of working safety and can be operated in all positions.

Hydraulic pullers are used in all kinds of industries, workshops and in many repair and assembly jobs to removeor install interference fit parts, such as: gears, couplings, bearings, wheels, pulleys, axles, shafts, brake drums,and many other press fit components.

Model Description Weight Price kgs £

MY - 1 Oil port - 6 x 3/8 - NPT inner 0.5 £48 MY - 2 Oil port - 4 x 3/8 - NPT inner 0.6 £42 MY - 4 Oil port - 7 x 3/8 - NPT inner 1.4 £76

MY - 22 Manifold with 2 shut-off valves 1.8 £155 MY - 44 Manifold with 4 shut-off valves 3.7 £299 MY - 66 Manifold with 6 shut-off valves 5.5 £460

MY - 22 - GYA Manifold with 2 shut-off valves and 2 pressure gauges 2.8 £241 MY - 44 - GYA Manifold with 4 shut-off valves and 4 pressure gauges 5.7 £472 MY - 66 - GYA Manifold with 6 shut-off valves and 6 pressure gauges 8.5 £698

Manifolds, 700 bar

Manifolds are used when severalhydraulic cylinders have to beconnected to one hydraulic pump.

All manifolds are equipped with 3/8NPT inner oil ports, so that fittings,hydraulic hoses, and couplers can beeasily attached.

Manifolds with shut-off valve

Manifolds with shut-off valves areused when different pressures mustbe maintained in each hydraulic line.Therefore, they allow the lifting ofunequal loads. The manifolds areready assembled and can be screweddirectly to a hand pump or powerpack.

BMZ ‘MODULAR’ HYDRAULIC PULLER KITS

BMZ ‘INTEGRATED’ HYDRAULIC PULLER KITS

66

Other types and capacity pullers are also available upon request. Please contact our sales team for further details.*



HSY UNIVERSAL REPAIR AND MAINTENANCE SETS

YHS HYDRAULIC SPREADERS

YCC-200 HYDRAULIC CHAIN CUTTER

Model Capacity Stroke Extension tubes Weight Price tonnes mm mm kgs £

Maintenance sets are indispensable in factories and workshops. They provide controlled hydraulic force foruniversal applications, such as pressing, straightening, lifting, flattening, pushing bolts, bending, spreading,tensioning, etc. The plug-in connections allow easy combination of all accessories. Both, plunger and cylinderbase are equipped with the appropriate plug-in connection for extension tubes and all accessories.

HSY-400 4 118 495, 420, 215, 155, 75 21.0 £174 HSY-1000 10 152 685, 455, 255, 105 35.0 £271

Model Max. capacity Max. pressure Oil volume Spread width Weight Price kN tonnes mm cc min./mm max./mm kgs £

YHS-05 5 0.5 700 10 16 100 1.9 £72

YHS-11 10 1 700 10 14 100 2.1 £105

YHS-15 15 1.5 700 70 35 220 6.9 £391

This new and improved Yale hydraulic chain cutter, model YCC-200, is designed forsafe and quick cutting of high-tensile chains up to 16mm diameter. It is suitable forgrade 80 and grade 100 chains.

The cutting force is supplied by the standard single-acting cylinder model: YS-23/50.

Recommended pumps:

• Air powered pump: PAY - 6.• Electric power pack: PY - 04/2/5/2 M.• Hand pump: HPS - 2/0.7.

The return of the moveable blade is performed by the returnspring of the hydraulic cylinder after relief of the hydraulicpressure. In combination with the PY-04/2/5/2M the bladereturns automatically.

*The chain cutter has two blades, a ‘fixed’ blade and a ‘moveable’ blade. Both bladesare identical and interchangeable.

The unit is also equipped with a unique chain support bar (shown above). This allowsfor perfect positioning of the chain link and leads to a much longer service life.

Complete unit (article no. 13900930) Price £2548Replacement blade (article no. 13900005) Price £136* EACH

Hydraulic spreader YHS - Single acting with spring return


These universal power tools can be used for all types of repair, maintenance andassembly work requiring precisely controlled power, e.g. aligning of containers andshells, lifting, positioning or aligning of machinery, structural components,forcing-off of shutterings and moulds. The spreaders can be operated with all handpumps (e.g. HPS - 1/0.7 or HPS - 2/0.7 and hydraulic hose HHC).

Features include:

• Operating pressure, maximum 700 bar.• Single acting with spring return.• Work in all positions.• Inclusive of female coupler half CFY-1 with dust cap.

67

Chainsupportbar

NEWMODEL



Hi-Lift all-cast jacks are available in 2 sizes - 4ft and 6ft and are an absolute necessity for allserious off-roaders.

The top winch connector clamp is supplied as standard with all Hi-Lift jacks and this componentgives the jack its multi-functionality, allowing it to be used in lifting or winching mode.

Also available are:

ORB OFF ROAD BASE KIT Price £32ORK OFF ROAD KIT Price £52

HI-LIFT®ALL CAST JACKS

Model Article Capacity Overall Type of Distance Price number height display between susp. points tonnes mm mm £ RPYS-2015D 4300008050 20 2580 - 2730 Digital LED 1030 - 1425 £8779

RPYS-3015D 4300008414 30 2580 - 2730 Digital LED 1030 - 1425 £10730

Hydraulic test rigs for hoisting equipmentCapacities: 20 and 30 tonnes

Hydraulic test rigs are designed for testing pul-lifts, lever hoists, chain blocks, wire rope pullers,as well as other lifting equipment after repair or during inspection.

Testing of hoisting equipmentThe lifting unit is placed between upper and lower shackles and the chain is tensioned against theoil cushion of the partly advanced piston of the hydraulic cylinder. The applied force can be readon the pressure gauge or the LED display depending upon the option selected.

Testing of the hoist brakeFor a functional test of the hoist brake, the hand pump may be used to apply a counter pressureand thus increase the pulling force after a general test. The external relief valve allows variouspreset pressures to be achieved.

Frequent useFor frequent testing, the hand pump may be replaced by an electric pump(PY-04/2/5/2/M). Please call our hydraulic sales team for further details.

Model HL-485 HL-605 Min. lift height mm 114 114 Max. lift height mm 981 1263 Overall height mm 1289 1568 Width mm 127 127 Depth mm 2446 2446 Rated load kgs 2113 2113 Winching capacity kgs 2268 2268 Clamping capacity kgs 340 340 Weight kgs 13 14 Price £ £88 £93

Supplied completewith digital load cell.

(not shown fitted in photograph).*FREE

1/2 days on-site Yale

training is provided with all

hydraulic test rigs.*

68

RPYS HYDRAULIC TEST RIGS



LB WIRE ROPE WINCHES

69

*Recommended wire rope: DIN 3060 FE-znk 1770 sZ-spa. **Recommended wire rope: DIN 3060 SE-znk 2160 sZ-spa.• All Pfaff winches are supplied WITHOUT wire rope.

Zinc-plated design 650 - 900kgs. Stainless steel design

250kgs.

LB wire rope winches

Capacities: 150 - 1200kgs (up to 900kgs in stainless steel)

Our best-selling range of winches designed for maximum versatility & efficiency.


• Options include free-wheeling device, variable cranks and a stainless steel version.

• Very lightweight design.

• Fitted with load pressure brake to prevent unintentional lowering of load.

• High efficiency obtained by spur gears.

• Column or base-mounting.

Variable crank.

Folding handle.

Type Zinc-plated design Free-wheel Stainless steel design

Article No. 30239016 30239015 41239004 41239006 42239008 42239007 32239009 32239017 42239012 32239013

Lifting capacity - 1st rope layer kgs 150 350 650 900 1200 900 1200 250 650 900 Lifting capacity - upper rope layer kgs 75 170 290 400 430 400 430 125 290 320 Drive group - DIN 15020 1 Em 1 Em 1 Em 1 Em 1 Em 1 Em 1 Em 1 Em 1 Em 1 Em Wire rope Ø mm 4* 4* 6* 7* 7** 7* 7** 4* 6* 7* Wire rope cap. - 1st layer m 0.8 1.8 1 0.8 1 0.8 1 1.8 1 1 Wire rope cap. - total m 11 20 20 14 26 14 26 19.5 20 26 Lift per crank rotation mm 125 125 55 58 45 58 45 125 55 45 Required crank pressure daN 17 25 22 24 24 24 24 20 22 24 Weight kgs 4.2 4.8 7.3 10 12.1 10 12.1 4,8 7,6 12,1 Price £ £142 £149 £174 £213 £251 £307 £399 £279 £491 £719

BESTSELLER



SG ‘WALL-MOUNTED’ WIRE ROPE WINCHES

70

Article No. 040271008 030271001 030271136 030271019

Lifting cap. - 1st layer kgs 125 300 500 750 Lifting cap. - upper layer kgs 65 220 350 550

Wire rope Ø mm 4* 5** 6** 7**

Wire rope cap. - 1st layer m 2 2.1 2.4 2 Wire rope cap. - upper layer m 12 15 15 10 Lift per crank rotation mm 138 68 35 35 Required crank pressure daN 13 15 13 20 Weight kgs 3 10 11 11

Price £ £152 £288 £276 £285

*Recommended wire rope: DIN 3055 FE-znK 1770 sZ-spa. **Recommended wire rope: DIN 3060 FE-znk 1770 sZ-spa.• All Pfaff winches are supplied WITHOUT wire rope.

125kgs

SG wall-mounted wire rope winches


Robust and well-designed, the SG is well-suited to industrial and plantconstruction, agriculture and wholesale applications.


• External braked safety crank for 300kg to 750kg units. • Removeable hand crank on 125kg unit. • Aluminium body on 125kg unit. • Heavy duty steel for 300kg to 750kg units.

300 - 750kgs

ALPHA ‘WALL-MOUNTED’ WIRE ROPE WINCHES

Article No. 030272006 030272005 030272002 030272001

Lifting cap. - 1st layer kgs 300 500 750 1000 Lifting cap. - upper layer kgs 130 230 270 360

Wire rope Ø mm 5* 6* 7* 7*

Wire rope cap. - 1st layer m 1.3 1 1 1 Wire rope cap. - upper layer m 28 20 26 26 Lift per crank rotation mm 57 55 45 45 Required crank pressure daN 13 17 17 18 Weight kgs 10 10 16 16

Price £ £253 £295 £364 £368

*Recommended wire rope: DIN 3055 FE-znK 1770 sZ-spa. • All Pfaff winches are supplied WITHOUT wire rope.

ALPHA, wall-mounted wire rope winches


Multi-positional and easily mountable winch, compact, low-weight andavailable in zinc-plated or galvanised options.


• Toothed spur wheel back gear giving high efficiency. • Low pressure brake to prevent unintentional lowering of load. • Rope output possible in every direction. • Folding handle or variable crank option for use in confined spaces.

Variable crank.

Folding handle.



71

Hand operated

gearboxes, type

S24, are also

available as fitted

to the CG winches.

Call the sales team

for details.

*

*Recommended wire rope: DIN 3060 FE-znk 1770 sZ-spa.• All Pfaff winches are supplied WITHOUT wire rope.

CG WIRE ROPE WINCHES

• All Pfaff winches are supplied WITHOUT wire rope.

CG, wire rope winches


Compact, base-mounting, aluminium wire rope winch with closed construction suitable forexposed environments.


• Hardened worm shaft and self-locking worm gear. • Sealed gears for continuous lubrication and quiet operation. • Teflon coated bearings. • L/R hand side drum mounting with free-wheel device.

LAMBDA WIRE ROPE WINCHES

WITH FREE WHEEL WITHOUT FREE WHEEL Article No. 30207004 30208000 30207005 30208001 Lifting cap. - 1st layer kgs 750 1120 750 1120 - upper layer kgs 600 600 600 600 Wire rope capacity - total m 10 10 10 10

Wire rope Ø* mm 6 7 6 7 Lift per crank rotation mm 15 11 15 11 Required crank pressure daN 20 22 20 22 Weight kgs 7 7 7 7 Price £ £355 £347 £539 £589

LAMBDA, wire rope winches

Capacity: 300kgs

Strong, durable winch designed specially for safely moving loads above people. Conformsto German Safety Standard BGV C1 and is ideal for use in theatres, studios and warehouses.


• Grooved drum. • Spring loading rope pressure drum for improved one layer rope coiling. • Safety spring double brake system automatically holds load. • Oprional extras include wall bracket, multiple cable grooved drum.

Article No. 030272015 030272017

Lifting capacity kgs 300 300

Max. wire rope cap. in 1 layer m 10 15

Wire rope Ø mm 6* 6*

Lift per crank rotation mm 50 50

Weight kgs 30 36

Price £ £1091 £1251



GAMMA ‘ALUMINIUM’ HAND WINCHES

72

GAMMA - 200kgs

AL - 500kgs*Recommended wire rope DIN 3060 FE-znK-1770 sZ spa. **Low/high-speed.• All Pfaff winches are supplied WITHOUT wire rope.

*

GAMMA AL GAMMA Article No. 040270004 040270001 040270006

Lifting cap. 1st layer kgs 200 500 800 upper layer kgs 110 200 350 Wire rope cap. 1st layer m 3.6 4.2 5.3 upper layer m 40 50 78 Drive group DIN 15020/1 1 Em 1 Em 1 Em Wire rope Ø* mm 4 6 7 Lift per crank rotation mm 195 60/400** 36/280** Required crank pressure daN 19 12 18 Ratio of transmission – 6.57:1 7.57:1 Weight kgs 6 14 16 A mm 120 120 200 B mm 160 220 326 C mm 192 330 336 D mm 152 100 180 E mm 165 267 327 F mm 135 125 250 G Ø mm 9,5 11 14 H Ø mm 50 60 70 L mm 320 250 320 M mm 207 165 207 Price £ £334 £575 £908

GAMMA 800kgs

GAMMA, aluminium hand winches


These models are the solution to many winching problems. Thedesign features two-speed gearing on some models with very fastoperation. The two speeds are available depending upon thecapacity; for example on the 500kg winch the fast speed winds in335mm for each turn of the crank with loads below 90kgs, whilstthe slow speed lifts full loads with minimum effort.


• Aluminium construction. • Teflon coated bearings to reduce effort with a roller chain drive. • Automatic self-sustaining spring loaded brake acting in both directions. • Base, wall or ceiling mounting. • Removeable handle, operates from both ends of the winch.

GAMMA 200kgs / 800kgs *Only 800kgs design AL 500kgs



WG ‘WALL-MOUNTED’ WIRE ROPE WINCHES

WB ‘WALL-MOUNTED’ WIRE ROPE WINCHES

73

Article No. 030242004 030243000 030244007

Lifting capacity - 1st layer kgs 250 500 750

- upper layer kgs 210 425 624

Wire rope Ø mm 5 6 8

Wire rope cap. - 1st layer m 4.8 7.9 9.2

- upper layer m 11.3 29.1 49

Lift per crank rotation mm 20 26 20

Required crank pressure kgs 9.2 14.5 16

Weight kgs 12.5 21 42

Price £ £495 £707 £1057

Article No. 040251003 040252026 040253006 040253000 30254002 30255009 30256013

Lifting capacity - 1st layer kgs 250 500 1000 1500 2000 3000 5000

- Upper layer kgs 100 238 500 850 1100 2000 3300

Wire rope Ø mm 5* 6* 9* 10* 13* 16* 20*

Wire rope cap. - Upper layer m 44 54 46 38 37 34 33

Lift per crank rotation mm 29 30 21 18 8/16** 7/14** 8/16**

Crank effort - 1st layer daN 6 11 10.6 16 9/18** 12/24** 25.2/50.4**

Weight kgs 13 16 26 28 60 78 115

Price £ £377 £405 £548 £694 £1862 £2341 £2942

WB, wall-mounted wire rope winches


Robust, cast-iron hand-operated worm gear winches built for long-lasting performance.Ideal for use in theatres, sports halls and a multitude of industrial applications.


• Cast iron enclosed construction & hardened worm shaft provides durability. • Gears are enclosed in an oilbath (oil not supplied), ensuring smooth operation. • Automatic friction brake ensures load/operation safety. • Adjustable crank radius for use in confined spaces. • Available with multi-compartment and/or groove drums.

*Recommended wire rope DIN 3060 FE-znK. **Low / high speed. • All Pfaff winches are supplied WITHOUT wire rope.

• All Pfaff winches are supplied WITHOUT wire rope.

WG1500

WG, wall-mounted wire rope winches with worm gear drive


Heavy-duty wire rope winch suitable for use in areas where electricity isn’t availableor where electrical appliances can not be safely operated. Can also act as a reliablemanual back-up for a powered appliance. Ideal for use in theatres, sports halls anda multitude of industrial applications.


• 2 lifting speeds on 2000kgs+ models. • Compact design, robust fabricated steel frame, suitable for wall-mounting. • Machine-cut worm wheel & shaft, mounted bearings & worm gear drive. • Lots of optional extras available including multi-compartment drums, grooved drums, free drum-spooling device, controlled free spooling, air motor and zinc-plated.

WG500



HW-C/CS ‘SPUR GEAR DRIVE’ MANUAL WIRE ROPE WINCHES

74

Stainless steel, spur gear drive, manualwire rope winchModel HW-CS

Capacities: 300 - 800 daN

Features include:

• As per the HW-C, except that the winch housing and rope drum are made from stainless steel. The plain drum bearings are made from bronze for additional corrosion resistance.

Applications:

Again, as per the HW-C but with even more protection against theelements faced when using outdoors.

HW-C 30 300 120 22 4.2:1 5 13.6 20 9 3.8 £44

HW-C 80 800 400 20 10:1 8 34.8 15 7 10.1 £98

HW-CS 30 300 120 22 4.2:1 5 13.6 20 9 3.8 £153

HW-CS 80 800 400 20 10:1 8 34.8 15 7 10.1 £263

Dimensions

Reference HW-C 30 HW-C 80 HW-CS 30 HW-CS 80 A 156 216 156 216 B 184 293 184 293 C 88 127 88 127 D 208 319 208 319 E 27 27 27 27 F 273 308 273 308 G 51 63 51 63 H 109 109 109 109

Spur gear drive, manual wire rope winch

Model HW-C


Features include:

• Winching housing and rope drum from robust steel plate for high versatility.• Rope drum on bush bearings for flawless rope lead-off.• Spur gear drive for optimal efficiency.• Compact design.• Easy and quick mounting onto walls, poles, towers etc.• Pivotable handle.• Automatic load pressure brake for safe holding and extremely sensitive lowering of the load. Unintentional brake release is prevented even with swinging loads.• The wire rope winch comes with a high visibility, yellow powder coated finish as standard.• Suitable for operation in ambient temperatures of -100 to +500

Applications:

Suitable for use in areas where electricity is not available or where

electric appliances can not besafely operated on account

of water, mud or dirt.

These winches are not

designed for passenger

elevation and must not be

used for this purpose!* Model Lifting / Lifting / Crank Ratio Recomm. Minimum Wire Number Weight Price pulling pulling effort 1st rope breaking rope of rope without cap. 1st cap. top rope layer diameter load of storage layers wire rope layer rope layer wire rope max. max. rope daN daN daN mm kN mtr kgs £*

*All winches are supplied WITHOUT wire rope.



75

MWS ‘SPUR GEAR DRIVE’ MANUAL WIRE ROPE WINCHES

AG HAND WINCHES

75

*All winches are supplied WITHOUT wire rope.

Model Lifting / Lifting / Crank Ratio Recomm. Minimum Wire Number Weight Standard Corrosion pulling pulling effort 1st rope breaking rope of rope without unit resistant cap. 1st cap. top rope layer diameter load of storage layers wire price finish rope layer rope layer wire rope max. max. rope price daN daN daN mm kN mtr kgs £* £*

MWS 125 125 55 11 1:1 4 5.7 52 18 7.0 £202 £283

MWS 300 300 120 7 1:7.4 5 15.9 26 9 10.0 £289 £405

MWS 500 500 323 13 1:7.4 6 22.9 12 5 11.0 £356 £665

MWS 1000 1000 684 15 1:17 9 51 27 5 28.0 £625 £875

MWS 2000 2000 1712 24 1:25.7 13 106 7 2 32.0 £943 £1320


Features include:

• Enclosed gear drive for protection of internal parts, even under tough working conditions.• Spur gears on roller bearings, rope drum on plain bearings.• Very compact design and easy and quick mounting onto walls, poles, towers etc.• Load pressure brake.

Lifting capacities: 45 - 100kgs

Hand operated winches designed for use inraising blinds, shutters, clothes lines andchandeliers.

The AG has a solid build quality with die castconstruction, corrosion resistant internalparts and powder coated paint finish.

Suitable for wall mounting.

Pressure brake.

Model AG-45 AG-100 Article number 030241000 030241001 Lifting capacity 1st layer kgs 45 100 Wire rope diameter mm 2 3 Wire rope capacity m 12 8 Ratio 1:1 3:1 Average lift per turn of crank mm 45 15 Effort required kgs 15 8 Weight kgs 1 2 Price £ £84 £121

Model AG-45 AG-100 A mm 142 200 B mm 103 103.50 C mm 170 180 D mm 122 180 E mm 83 83.50 F mm 155 155 G mm 100 150 H mm 20 20 J mm 83 94 K mm 8 10 L mm 25 30 M mm 80 80 N mm 5 5

TECHNICAL DATA / PRICES DIMENSIONS



BETA SILVERLINE ELECTRIC WIRE ROPE WINCHES

76

1st layer total

*Recommended steel rope DIN 3069 FE-znk-1960. **A.C.motor drive 230V. • All Pfaff winches are supplied WITHOUT wire rope.

Due to the extensive range of options that are available on the BETA electric winches it is impossible toshow all available models and variants. Please call the Pfaff sales team with your enquiry.*

Article no. Size Lifting Rope Drive Motor Rope Rope capacity Price direct contactor capacity speed group Power Ø* 1st layer total direct contactor control control 1st layer FEM control control with limit limit switch switch kgs m/min kW mm m m £ £ 031140004 - Mini 125 5.1 1 Bm 0.25 4 7 46.7 £1308 - 031140000 - Mini 250 2.5 1 Bm 0.25 4 7 46.7 £1350 - 031140001 031140006 Mini 250 5.1 1 Bm 0,37 4 7 46.7 £1350 £1799 031140005** 031140015** Mini 250 3.7 1 Bm 0,55 4 7 46.7 £1590 £2297 031148065 031149065 BG 1 500 3.5 1 Am 0,37 6 8.4 58.5 £1713 £2215 031148129 - BG 1 630 6.8 1 Bm 0.75 6 6.7 48.9 £1877 - 031148254 031149254 BG 2 980 3.4 1 Am 0,75 9 11 77.5 £2392 £2285 - 031149302 BG 2 1250 5.9 1 Bm 1,1 9 8.7 64.1 - £3149 - 031149438 BG 3 1600 3.9 1 Am 1,1 12 12.1 87.8 - £4477 - 031149533 BG 3.5 3200 6.3 1 Am 3 14 11.4 64.5 - £5445


Compact & cost effective, this range of winches offer a fixed range of options at acompetitive price, inc. the very popular mini ‘O’ model.


• Enclosed spur gear in an oilbath = low maintenance & long service life. • Mini ‘O’ model is available in single phase. • Electronic overload protection on all models over 1000kgs.

BETA PROLINE ELECTRIC WIRE ROPE WINCHES

*Recommended steel rope DIN 3069 SE-znk-1960, non-rotating. • All Pfaff winches are supplied WITHOUT wire rope.


Designed for performance, efficiency & safety, BETA PROLINEwinches offer literally hundreds of application possibilities, optionalextras and accessories.


• Strong 3-phase motors with flexible supply voltage & IP54. • Wide range of load capacities, lifting heights and speeds. • Safe operation with separate contactor control (42v/50Hz). • Spur gearing in an oilbath for simple maintenance / long service life.

Article no. Size Lifting Drive Rope Motor Recomm. Rec. Rope capacity Weight Price capacity group speed Power Rope Rope in 1st layer FEM 1st layer Nom. Ø* strength kgs m/min kW N/mm2 mm m m kgs £

031148012 1 250 2m 9.5 0.42 1770 5 16.2 77.8 61 £2009 031148077 1 500 1 Am 8.5 0.75 1960 6 8.4 58.5 63.9 £2047 031148259 2 980 1 Am 7.5 1.28 1960 9 11 77.4 104 £2603 031148505 3.5 2500 2m 7.6 3.35 1770 14 13.8 53.9 224 £5451



S20/S24 HAND OPERATED GEARBOXES

77

DSR S SHEAVES

Model Article no. D Rope Ø Dm Drive Tensile load kg Ball D1 R B Price group at deflection bearing Ø mm mm mm FEM 90° 180° mm mm mm £

DSR S 145/5 033447204 145 5 125 2m 1100 800 6205ZZ 25 2.7 34 £58

DSR S 145/6 033447205 145 6 125 2m 1100 800 6205ZZ 25 3.2 34 £63

DSR S 185/8 033447207 185 8 160 2m 2300 1630 6306ZZ 30 4.2 42 £156

DSR S 270/10 033447209 270 10 245 3m 2500 1800 6208ZZ 40 5.3 41 £227

DSR S 270/12 033447211 270 12 246 2m 2500 1800 6208ZZ 40 6.5 41 £238

DSR S 325/14 033447217 325 14 297 2m 4500 3200 6310ZZ 50 7.5 60 £401

DSR S 400/18 033447214 400 18 364 2m 5000 3800 6310ZZ 50 9.7 61 £753

• Other size options are available upon request. Please call the Pfaff sales team for further details.

Drives: hand operated gearbox

Can be used as a rotary actuator, as a gearbox for cable winches or as a gearbox for chain drives.• Easy and safe operation. • Load is held securely due to self locking worm gear. • Self locking.

Model: S20 With cast iron housing mounted into a rolled section fixing bracket. With machined worm wheel and hardened worm shaft running on bronze bushes.

Model: S24 With diecast aluminium housing suitable for use in hostile

environments. Machined Phosphor Bronze worm wheel and hardened worm shaft fitted with teflon sintered bearings to reduce effort.

Model S20 S24 Article no. 032626004 032626020 Ratio 20:1 24:1 Driving torque daN m 12 36 Effort on crank kgs 11 22 Total shaft length mm 196 200 Shaft diameter mm 25 36 Hole distance mm 170 135/60 Hole diameter mm 13 13 Weight kgs 5 8 Price £ £172 £293

Pfaff’s wire rope pulleys are available in a wide variety of sheave diametersfrom 80mm up to 490mm and wire rope diameters from 6mm to 18mm.


• Wear resistant rope guide. • Made from high quality steel. • Bearings fitted as standard.

S20

S24



DSRB SHEAVE BLOCKS FOR MANUAL WINCHES

78

F Rope

F Rope

Model Article D Rope Dm Drive Max. tensile D1 L C H B E S K M/M1 Price number Ø Ø Ø group load kg Ø Ø Ø at deflection mm mm mm FEM 90° 180° mm mm mm mm mm mm mm mm mm £

DSRB S 90/60 033447413 90 5-6 78 1Dm 1100 800 25 200 160 224 125 88 6 110 11.5/13 £72

DSRB S 145/7 033447106 145 7 126 1Am 2300 1630 30 245 195 273 138 106 8 135 13.5/15 £143

DSRB S 185/8 033447107 185 8 160 2m 2500 1800 40 360 290 407 191 138 10 202 18/20 £181

DSRB S 270/12 033447111 270 9-12 246 3m 5000 3800 50 530 430 612 302 212 15 310 26/30 £412

DSRB S 400/16 033447113 400 13-16 368 3m 8000 6000 65 650 580 694 313 220 16 340 34/40 £1336

DSRB S 490/20 033447115 490 20 450 3m 8000 6000 65 650 580 694 313 220 16 340 34/40 £1750

Other size options are available upon request. Please call the Pfaff sales team for further details.

Rope Ø

Standard cables for Pfaff hand winches

Galvanized 6 x 19 design in accordance with DIN 3060, with fiber inlay at one end with pressed in thimble and ultra-strong safety hook, andpoint-cut (blunt) at the other. Please refer to the table below for the order number required, taking account of the cable diameter and length.

Rope Ø DIN... Calculated Rope lengths Lifting capacity breaking strength 5 10 15 20 of eye hooks mm kN mtrs mtrs mtrs mtrs kgs

4 ... 3060 10.1 £17 £20 £24 £27 500

5 ... 3060 15.8 £20 £24 £29 £34 1000

6 ... 3060 22.8 £22 £28 £34 £40 1000

7 ... 3060 31.0 £24 £31 £35 £42 1000

7 ... 3069* 43.9 £26 £33 £42 £50 1600

*Cable with higher breaking strength for wire rope winch LB 1200kgs.

Additional accessories available on request:

• Cable suspension gear (1 to 4-strand). • Wire cable blocks with hooks and swivel eyes. • Sling ropes with loops at both ends. • Hinged wire cable blocks. • High-strength shackles. • Wire rope sheave block with plastic sheave. • Gibs and cotters, turnbuckles.



Wire rope sheave block for BETA PROLINE and SILVERLINE

Guiding with DSRB S wire rope sheave blocks for BETA PROLINE and SILVERLINE electric rope winches. The dynamic all-rounder with variablerope and sheave diameters and cable deflections of up to 1800 can move loads of up to 8 tonne with ease and absolute reliability. Typical forPfaff is the high standard of quality: With a sheave block for manual and powered operation, equipped with grease-filled, sealed ball-bearingsas standard. A carefully coordinated system of application-specific cable diameters and matching turned precision cable groove ensures thatthe unit is also wear-free.

DSRB SHEAVE BLOCKS FOR ELECTRIC WINCHES

79

F Rope

F Rope

Model Article D Rope Dm Drive Max. tensile D1 L C H B E S K M/M1 Price number Ø Ø Ø group load kg Ø Ø at deflection mm mm mm FEM 90° 180° mm mm mm mm mm mm mm mm mm £

DSRB S 90/4 033447103 90 4 80 2m 700 500 20 120 90 134 85 62 4 65 9/9 £70

DSRB S 145/5 033447104 145 5 125 4m 1100 800 25 200 160 224 125 88 6 110 11.5/13 £140

DSRB S 145/6 033447105 145 6 125 2m 1100 800 25 200 160 224 125 88 6 110 11.5/13 £142

DSRB S 185/8 033447107 185 8 160 2m 2300 1630 30 245 195 273 138 106 8 135 13.5/15 £181

DSRB S 185/9 033447108 185 9 162 1Am 2300 1630 30 245 195 273 138 106 8 135 13.5/15 £183

DSRB S 270/12 033447111 270 12 246 2m 2500 1800 40 360 290 407 191 138 10 202 18/20 £412

DSRB S 325/14 033447117 325 14 297 2m 4500 3200 50 440 350 490 260 180 12 242 22/25 £1089

DSRB S 400/16 033447113 400 16 368 3m 5000 3800 50 530 430 612 302 212 15 310 26/30 £1336

DSRB S 400/18 033447114 400 18 364 2m 5000 3800 50 530 430 612 302 212 15 310 26/30 £1143

DSRB S 490/20 033447115 490 20 450 3m 8000 6000 65 650 580 694 313 220 16 340 34/40 £1750

Rope Ø

Additional accessories available on request:

• Cable suspension gear (1 to 4-strand). • Wire cable blocks with hooks and swivel eyes. • Sling ropes with loops at both ends. • Hinged wire cable blocks. • High-strength shackles. • Wire rope sheave block with plastic sheave.



CALCULATING WINCH LIFTING CAPABILITIES

80

Since the rope is continuous, from the drum to the attachment point, the load is always 1 tonne, no matter where measured. The head load isthe number of line attachments at the head sheave x 1 tonne. All loads shown ignore frictional losses in the system.



DRIVE GROUP TO DIN 15020 - PART 1

FLEET ANGLE / SLOPES / RESISTANCE

81

If the duration of an operating cycle is 12 minutes or longer, the rope may be graded once drive group lower than the drive group gradingdetermined from the running time catagory and from the load collective.

RUNNING TIME LIGHT MEDIUM HEAVYCATAGORY(running time per day in Max load occurs Low, average. Max load occurs Max load occurshrs related to one year) only infrequently. with roughly equal frequency. almost continuously.

V006 up to 0.125 1Em 1Em 1Dm

V012 up to 0.125 1Em 1Dm 1Cm

V025 up to 0.125 1Dm 1Cm 1Bm

V05 up to 0.125 1Cm 1Bm 1Am

V1 up to 0.125 1Bm 1Am 2m

V2 up to 0.125 1Am 2m 3m

V3 up to 0.125 2m 3m 4m

V4 up to 0.125 3m 4m 5m

V5 up to 0.125 4m 5m 5m

• Calculating the fleet angleMinimum distance from drum to first sheave or load connection - M.

1 92 183 274 365 456 547 638 739 8210 9011 9912 10813 11714 12615 13416 14317 15118 16019 16920 178 25 22030 26035 29940 33745 37250 40655 43760 46465 49270 51975 54380 56585 58790 60795 624100 638

• Slope & grade resistance

GRADE GRADE RESISTANCE (Percent per 100 (kgs pull per tonne to horizontal feet). overcome grade resistance).

18

15

12

9

6

3

0

129 254 380 508 635 767

Grooved drum3 degrees

Smooth drum3 degrees

Drum length - mm



STANDARD HAND PALLET TRUCKS

82

Pfaff ‘Silverline’

Standard hand pallet trucks

Lifting capacity 2500kgs

Pfaff’s range of hand pallet trucks have gained an enviable reputationfor strength, quality & durability. All Pfaff trucks have a high-qualityepoxy coating, a comfortable ergonomic handle which can be turnedon 2100 to the left and right side and can be supplied with variedsteering / load wheel combinations.

We can offer two fork sizes in our Silverline (best seller) ranges to suitboth the standard Euro and GKN pallet sizes.


• Smooth and quiet motion due to the use of rubber rollers. • Easy Handling as the handle is released ffrom the hydraulic system to the neutral position. • Precisely adjustable pressure control valve to prevent damage from overloading. • One-hand control for controlling all functions such as lifting, transporting and lowering. • Ergonomic handlebar. • Specially hardened axles, maintenance-free bearings and hard chrome-plated piston rods. • Precision lowering valve to enable you to adjust the lowering speed to your requirements.

High quality rodassembly andlever giving

controlled liftingand lowering.

2100 steeringleft and right.

Double coatedchrome piston withhigh quality seals

reduce effort atmaximum load.

Epoxy coated finish.

High qualityconstruction.

Rubber wheels asstandard although

other options areavailable.

Robust design with reinforcedframe for greater strength.

Investment castingwith integrated oilresevoir. Increasedsafety with spring

guard.



STANDARD HAND PALLET TRUCKS

83

Type ‘Standard forks’ ‘Wide forks’

Article no. 034527101 034527105

Lifting capacity tonnes - 2.5 2.5

Steering/load wheels* - - SR / PUR SR / PUR

Wheel size (front) mm - 200 x 50 200 x 50

Load wheel size (rear) mm - 82 x 70 82 x 70

Number of wheels front/rear - - 2 / 4 2 / 4

Lifting height mm h3 115 115

Load centre mm c 600 600

Height of steering handle mm h14 1200 1200

Fork height when lowered mm h13 85 85

Total unit length mm L1 1535 1535

Useable fork length mm l 1150 1150

Fork width mm e 160 160

Fork thickness mm s 45 45

Inside of forks mm b3 220 365

Outside fork width mm b1 540 685

Floor/ground clearance mm m1 40 40

Weight kgs - 79 88

PRICE £ £316 £326

*Solid rubber (SR), Polyamide (PA), Polyurethane (PUR).

Special prices are available for ‘flat packs’ of 6 units. Please call the Pfaff sales team for details.*

Reinforced pallet entry rollers.

Tandem rollers as standard.

SPARESSee pages 222-223.

for Pallet Truck

spare parts.*

BESTSELLER



NON-STANDARD HAND PALLET TRUCKS

84

PROLINE 5 tonnefor heavy loads.

Non-standard hand pallet trucks

Pfaff have a range of hand pallet trucks that is second to none!

The units shown on the next two pages are just a sample tosome of the variety of trucks we have to offer.

If you can not see a hand pallet truck shown below thatsuits your requirement please call the Pfaff sales team withthe details and challenge us to provide you a solution!

Type ‘Printers’ ‘Short fork’ ‘Long fork’ ‘3 tonne’ ‘5 tonne’ ‘Weighing’

Article no. 040010026 034527155 034527201 034527128 034527058 040016431

Lifting capacity t 1.5 2.5 2 3 5 2

Steering/load wheels* - SR / PUR SR / PUR SR / PUR SR / PUR ST / ST PUR / PUR

Wheel size (front) mm 185 x 50 200 x 50 200 x 50 200 x 50 200 x 50 180 x 50

Load wheel size (rear) mm 50 x 70 82 x 70 50 x 70 82 x 70 80 x 80 74 x 70

No. of wheels front/rear - 2 / 4 2 / 4 2 / 4 2 / 4 2 / 4 2 / 4

Lifting height mm h3 115 115 115 115 110 110

Load centre mm c 450 500 600 600 600 600

Steering handle height mm h14 1200 1200 1200 1200 1220 1210

Fork height lowered mm h13 85 85 85 85 90 85

Total unit length mm L1 1335 1385 2385 1535 1535 1580

Useable fork length mm l 950 1000 2000 1150 1150 1150

Fork width mm e 120 160 160 160 210 180

Outside fork width mm b1 450 540 540 540 580 570

Floor/ground clearance mm m1 40 40 40 40 40 35

Weight kgs 70 81 126 95 240 129

Price £ £330 £341 £557 £341 £5907 £1659

*Solid rubber (SR), Polyamide (PA), Polyurethane (PUR), Steel (ST).

SILVERLINEwith scales.

PROLINE withshort forks of

only 1000mm.

PROLINE with extendedforks of 2000mm.

Printer truckwith 450 wide

x 950mmlong forks.



NON-STANDARD HAND PALLET TRUCKS

85

SILVERLINEwith a wider

loading widthof 840mm.

PROLINE stainless steel.

Type ‘Extra wide’ ‘Galvanised’ ‘Stainless ‘Low profile’ ‘Parking ‘Quick lift’ steel’ brake’

Article no. 034527132 034527170 040005740 034527124 034527135 034527125

Lifting capacity t 2 2.5 2 1.5 2.5 2

Steering/load wheels* - SR / PUR PA / PA PA / PA PA / PUR SR / PUR SR / PUR

Wheel size (front) mm 200 x 50 200 x 50 200 x 50 180 x 50 200 x 50 200 x 50

Load wheel size (rear) mm 82 x 70 82 x 70 82 x 70 50 x 70 82 x 70 82 x 70

No. of wheels front/rear - 2 / 4 2 / 4 2 / 4 2 / 4 2 / 4 2 / 4

Lifting height mm h3 115 115 115 115 115 115

Load centre mm c 600 600 600 600 600 600

Steering handle height mm h14 1200 1200 1200 1220 1200 1200

Fork height lowered mm h13 85 85 85 51 85 85

Total unit length mm L1 1535 1535 1535 1535 1535 1535

Useable fork length mm l 1150 1150 1150 1150 1150 1150

Fork width mm e 160 160 160 160 160 160

Outside fork width mm b1 850 540 540 540 540 540

Floor/ground clearance mm m1 40 40 40 40 16 45

Weight kgs 112 86 86 84 84 84

Price £ £399 £578 £2355 £393 £378 £368

*Solid rubber (SR), Polyamide (PA), Polyurethane (PUR), Steel (ST).

PROLINE witha service and

parking brake.

PROLINE with low heightforks of only 51mm.

PROLINE with quick lift.(a pallet can be transported

with only 2 strokes).



JOKER CLASSIC PROLINE ELECTRIC PALLET TRUCKS

86

Pfaff ‘Joker Classic’ hand pallet truck with electric drive

Lifting capacity 1500kgs

Pfaff’s Proline Joker Classic electric pallet truck is ideal for the internal application of transporting palletisedgoods on even ground, covering short distances.

The compact dimensions and easy handling turn the Joker Classic into a real alternative to a standard handpallet truck. An electric control and the powerful motor ensure a finely metered and rapid start. High performancehydraulic pump guarantees a smooth lifting of the load.


• Safety control handle with the functions: lifting, driving and lowering. • Lowering speed can be finely metered for sensitive lowering of the load. • Pressure relief valve as protection against overload. • Maintenance-free motor and batteries. • Opportunity charging at any 240v power socket due to integrated battery charger. • Strong DC middle-motor with electromagnetic brake. • Battery charger indicator. • Entry rollers facilitate entry into bottom-boarded pallets.

Type Joker Classic

Article no. 040031013

Lifting capacity kgs 1500

Load centre mm c 600

Tyre type* - PUR+PUR / PUR

Steering rollers mm 200 x 70 + 80 x 70

Load wheels mm 50 x 30

Fork height, maximum mm h15 200

Steering handle height mm h14 1310

Fork height lowered mm h13 85

Total unit length mm L1 1645

Outside fork width mm b1 540

Fork width mm e 160

Useable fork length mm l 1150

Floor/ground clearance mm m2 37

Aisle width pallet mm Ast 1895

Turning circle radius mm Wa 1430

Travel speed with/without load km/h 3/3.3

Lowering speed with/without load m/s metered

Gradient with/without load % 5/8

Battery voltage V/Ah 2 x 12/40

Battery weight kgs 20

Type of control impulse

Weight (with battery) kgs 160

Price £ £2537

*Polyurethane.

NEWMODEL



87

EGU ELECTRIC PALLET TRUCKS

EGU, ‘Heavy duty’ electric pallet truck


Pfaff offer a range of multi-purpose, heavy duty, electric pallet trucks for professional lifting tasksup to 2000kgs. These units are robustly constructed, comfortable to drive and steer, and canoperate in tight spaces given their compact housing chassis.

The EGU range really is designed for the professional user and is ideal for working on rampsand for loading/unloading container lorrys.


• Multifunctional control handle for easy handling. The electric pallet lift truck will automatically be slowed down if the control handle in the operators hand. • Impulse control for steppess regulation of driving speed. • Slow moving function at upright handle position for the use in confined spaces. • Battery size depends on the type of application. • Anti-crush safety device on handle.

Type EGU PS 14 S EGU PS 14 P EGU PS 20

Article no. 040046050 040040500 040046842

Lifting capacity kgs 1400 1400 2000

Operation Pedestrian Pedestrian Pedestrian

Load centre mm c 600 600 600

Tyre type* - VG/PUR VG/PUR PUR/PUR

Steering rollers mm 250 x 76 + 100 x 40 250 x 76 + 100 x 40 230 x 75 + 100 x 40

Load wheels mm 82 x 80 82 x 80 82 x 80

Stroke mm h3 115 115 115

Fork height, maximum mm h15 200 200 200

Steering handle height mm h14 1241 1241 1320

Fork height lowered mm h13 85 85 85

Total unit length mm L1 1650 1650 1715

Outside fork width mm b1 525 525 550

Fork width mm e 150 150 170

Useable fork length mm l 1150 1150 1150

Aisle width pallet mm Ast 1900 1900 2000

Turning circle radius mm Wa 1435 1435 1575

Travel speed with/without load km/h 4.5/4.7 4.5/4.7 6.0/6.0

Lowering speed with/without load m/s 0.04 0.04 0.05/0.04

Gradient with/without load % 5/10 5/10 10/20

Battery Starter Traction Traction

Battery voltage V/Ah 24/74 24/74 24V/180Ah

Weight (with battery) kgs 203 246 520

Price £ £4998 £5618 £10242

*Polyurethane (PUR), Solid Rubber (VG).

HEAVYDUTY

All prices shown below are

INCLUSIVE of battery and

battery charger.!

EGU PS 20



HIGH LIFT HAND PALLET TRUCKS

88

Scissor pallet truck with manual-hydraulic liftor electric-hydraulic lift option

Capacity: 1000kgs

A combination of hand pallet truck and elevating platform for the transportand raising of palletised loads to various departments. Manual and electricoptions are available.

HU HS 10 A (Manual/hydraulic lift) features:

• Safety control handle with the functions: - Quick lift - lifting - lowering - • Lowering speed can be finely metered for sensitive lowering of the load. • One-stage hydraulic for increased robustness. • Quick lift for loads up to 250kgs. • Overload protection by pressure relief valve. • Safety supports guarantee sure standing when the forks are raised. • Low noise and smooth running with standard tyres: steer rollers and load rollers - polyurethane.

HU ES 10 A (Electric/hydraulic lift) features:

• Increases the usefulness of the HU HS 10 A by saving operating time for demanding applications with frequent lifting and lowering operations. • Ergonomic control button for the hydraulic unit fitted in the handle. • In the case of battery failure the manual use of lifting and lowering is stil guaranteed. • Quick electric-hydraulic lifting of the load, pressure relief valve protects against overloading. • Low noise and smooth running due to polyurethane steering and load rollers as standard. • Additional tilting protection for the load rollers. • Comes complete with battery and battery charger.

Model HU HS 10 A HU ES 10 A

Article no. 26600010 26900010

Lift capacity Q kgs 1000 1000

Load centre c mm 600 600

Weight kgs 140 167

Tyre type** PUR/PUR PUR/PUR

Steering rollers mm 200 x 50 180 x 50

Load rollers mm 78 x 60 75 x 50

No. of wheels/load rollers 2 / 2 2 / 2

Stroke h3 mm 715 715

Max. height of handle h14 mm 1235 1230

Fork height lowered h13 mm 85 85

Overall length l1 mm 1650 1740

Overall width b1/b2 mm 540 540

Fork height s mm 50 50

Fork width e mm 160 160

Fork length l mm 1150 1170

Outside fork dimension b5 mm 540 540

Ground clearance m2 mm 35 35

Aisle width pallet Ast mm 1900 1990

Turning circle radius Wa mm 1440 1450

Battery charger V/A - 220 / 8

Battery voltage, capacity k5 V/Ah - 12 / 65

Price £ £590 £2327

**PUR...Polyurethane.



HV HYDRAULIC HAND STACKERS

89

Type HV 0516 HV 1008 HV 1016Article no. 040005551 034518032 034518030

Lifting capacity kgs 500 1000 1000Steering/load wheels* NYL/PUR PUR/PUR PUR/PUR Wheel size front mm 150 x 40 180 x 50 180 x 50Load wheel size rear mm 80 x 35 80 x 55 80 x 55Number of wheels front/rear 2/2 2/2 2/2Close mast height h1 mm 2000 1300 1965Load centre c mm 600 600 600Free lift h2 mm 1520 810 1510Mast height extended h4 mm 2000 1300 1965Wheelbase y mm 1630 1075 1075Fork height (maximum) h3+h13 mm 1600 900 1600Fork height (lowered) h13 mm 80 90 90Total unit length L1 mm 1690 1675 1675Total unit width B mm 800 765 765Useable fork length l mm 1150 1122 1122Fork widths x height e x s mm 100 x 45 60 x 60 60 x 60Outside dimension of forks b1 mm 200 - 770 570 570Floor/ground clearance m1 mm 25 25 25Turning radius Wa mm 1500 1445 1445Weight kgs 217 179 205Price £ £979 £1128 £1158

*Polyurethane (PUR), Nylon (NYL).

HV 0516, HV 1008 and HV 1016

hydraulic hand stackers


Manual drive and manual lifting

Range of sturdy, versatile hydraulic manual drive/lift stackerswith variable features.


• HV 0516 is compact and easy to manoeuvre with lifts up to 500kgs. • HV 0516 offers crane, barrel lifter and loading table attachments. • HV 1008 offers 900mm lift height. • HV 1016 offers 1600mm lift height.

HV 0516

HV 1008

HV 1016



EGV PSL PEDESTRIAN ELECTRIC DRIVE STACKERS

HP TROLLEY LIFTS

90

Model 1016 1225 1229 1235 Article no. 040040502 040040503 040040504 040044421

Lift capacity kgs 1000 1200 1200 1200

Load centre mm 600 600 600 600

Fork width mm 560 560 560 560

Fork length mm 1150 1150 1150 1150

Height of lift mm 1600 2500 2900 3500

Mast height, min mm 1970 2985 3385 3915

Free lift mm 1510 - - 80

Weight kgs 393 481 496 531

Price £ £5789 £6720 £6959 £8379

• All units come complete with 2 x 90Ah batteries and charger as standard.

Model HP 0285 HP 0212 HP 0485 HP 0412 Article no. 040008776 040008777 040008778 040008779

Lift capacity kgs 200 200 400 400

Platform width mm 550 550 550 550

Platform length mm 650 650 650 650

Platform height* mm 850 1200 850 1200

Weight kgs 65 70 66 71

Price £ £295 £400 £398 £440

*Maximum. NB: Shipped on a EURO PALLET.

HP, trolley lifts


Simple, lightweight and sturdy range of trolley lifts offering a chrome-platedchassis, 2 fixed and 2 steering rollers and a wheel brake. In addition, the HPoffers a hydraulic foot pump enabling smooth control of loads, enhanced by ahand-wheel operated valve.

A versatile and reliable unit for use in workshops, warehousing and packingenvironments.

EGV PSL 1016, 1225, 1229 and 1235 pedestrian

electric drive stackers


Electric drive and electric lift stackers

The Pfaff range of electrical drive and electrical lift stackers offer varying loadcapacities and height configurations to suit most loading and unloading tasks.

With strength, versatility and reliability in mind, our range has been chosen tosatisfy the demands of handling and warehousing professionals.



HX SCISSOR LIFT TABLES

91

HX 150, HX 300, HX 500 and HX 750

Type HX 150 HX 300 HX 500 HX 750 HX-D 0350Article no. 034600020 034600021 034600022 034600023 034600024

Lifting capacity kgs 150 300 500 750 350Wheel size mm 100 x 36 128 x 40 128 x 40 147 x 50 128 x 40Rollers PUR/PUR PUR/PUR PUR/PUR PUR/PUR PUR/PUROverall unit height h1 mm 960 984 984 990 965Overall unit length L1 mm 908 1093 1093 1330 1140Max. height of platform h3+h13 mm 720 880 880 1000 1300Min. height of platform h13 mm 220 285 285 420 370Platform length P1 mm 700 850 850 1000 910Platform width b1 mm 450 500 500 510 500Floor/ground clearance m1 mm 26 53 53 72 31Lift height per pump stroke mm 27 31 31 15 21Weight kgs 49 78 82 120 136Price £ £295 £350 £380 £460 £470

*Polyurethane (PUR).

HX 150, HX 300, HX 500, HX 750 and HX-D 350

scissor lift tables


Workshop platform with adjustable height, suitable for all manufacturing, packingand workshop applications.


• Five models offering 150 - 750kgs lifting capacities and 220 - 1000mm lift heights. • Hydraulic foot pumps lift the table with minimal effort. • Hand-wheel operated hydraulic valve precisely and safely lowers load. • Lockable wheel feature for added stability and safety. • HX-D 0350 offers double-scissor feature. • HX-D 0350 has greater lifting potential, up to 1.3mtrs.

HX 750

HX-D 350

HX-D 0350



92

Model Capacity Capacity Minimum Minimum Maximum Handle Weight Price on head on toe claw height head height stroke length mm kgs kgs mm mm mm mm kgs £

SJ-15 1500 1050 70 725 360 225 13.0 £132

SJ-30 3000 2100 70 735 360 249 20.0 £148

SJ-50 5000 3500 80 730 350 249 27.0 £172

SJ-100 10000 7000 85 800 410 300 43.0 £265

Steel jacks


Steel jacks are used primarily for assembly applications, to brace or supportloads. Mechanical steel jacks can basically be used to lift almost all kindsof loads in maintenance and repair, ship building, construction, as well asagriculture. The integrated carrying handle makes it a portable and versatiletool.

The load can be positioned either on the head or on the claw and by turningthe operating lever the jack shaft moves smoothly and conveniently up anddown along the rack.

The robust steel housing ensures a long service life, even in continuous use.


• The precisely machined gear box with optimal gear ratio ensures a minimum of effort and smooth operation. • The load can be positioned either on the head or the claw. • By turning the operating lever the jack moves smoothly and conveniently up and down along the rack. • The self-locking, anti-kickback operating lever reduces the risk of injuries. The handle can be tilted for use in confined spaces. • The load is held securely in any position. Inside the load brake the axial brake pressure is generated by the load itself, thus, it isproportional to the size of the load.

• No reduction of capacity on the claw.

SJ ‘SILVERLINE’ STEEL JACKS (FIXED CLAW)

Rail Jack, model RSJ

High stability on unevenground is ensured by theextra large floor plate(e.g. gravel)

Model SJ15 SJ15 SJ15 SJ15 SJ15 a, mm 76 83 108 124 108 b1, mm 164 200 190 252 190 b2, mm 38 38 52 65 52 b5, mm 140 140 170 170 170 g, mm 60 65 71 86 71 h1, mm 360 360 350 410 350 h2, mm 70 70 80 85 80 h5, mm 725 735 730 800 740 l1, mm 225 249 275 300 275 l2, mm 113 128 128 250 128 l, mm - - - - 180 lI, mm - - - - 250 lll, mm - - - - 70 lV, mm - - - - 45 V, mm - - - - 10

DIMENSIONS

Model RSL, floor plate.



STW-F ‘PROLINE’ STEEL JACKS (FIXED CLAW)

STW-V STEEL JACKS (ADJUSTABLE CLAW)

93

Article no. 040021975 040021984 040051705 040051712

Lifting capacity kgs 1500 3000 5000 10000

Minimum head height mm 720 720 720 792

Minimum claw height mm 60 61 62 85

Lift mm 350 350 300 300


Price £ £460 £550 £680 £1130

Article no. 040051701 040051710 040051712

Lifting capacity kgs 3000 5000 10000

Minimum head height mm 720 720 792

Claw height - 1 mm 69 62 85






Lift mm 350 300 300

Weight kgs 25 30 48

Price £ £690 £815 £1322

Steel jacks with FIXED lifting claw


Quality steel jacks used for lifting all types of loads across varying industries includingship repair, construction, maintenance and agriculture.

Load can be positioned on the head or the claw.

A very long service life is ensured via a robust steel housing and high quality spurgear, precise worked crank gear as well as additional worked pawl.

Pfaff steel jacks are supplied with SIKU braked safety crank fitted as standard.SIFEKU and RAKU cranks are available on request.

Steel jacks with ADJUSTABLE lifting claw


Steel jacks with adjustable lifting claw designed for use in confined or tight areas.High quality spur gear and robust steel housing offer long service life.

The crank handle, in different executions, moves the jack shaft at the rack. The toeheight of the claw can be adjusted to the required mounting or maintenanceapplication.

Pfaff steel jacks are supplied with SIKU braked safety crank fitted as standard.SIFEKU and RAKU cranks are available on request.

Sifekucrank.

Sikucrank.



lift

move

turn

ZWW WALL MOUNTED RACK AND PINION JACKS

94

ZWW, wall-mounted rack and pinion jacks - with spur gear - with worm gear


Best-selling range of high quality jacks designed for multi-purpose applications. Smooth lifting and high efficiency - in plant engineering, container construction,within the workshops or the building trade. For pulling and pushing, horizontalmoving or vertical supporting of loads of up to 10 tonnes.

Precisely machined racks and high quality can be achieved with the lowestpossible material wear, resulting in low costs.

Long-term experience with rack and pinion jacks result in superior Pfaff quality,guaranteeing the lifting and lowering of all kinds of loads.

The wall-mounted rack and pinion jacks in 500kgs to 3000kgs versions are alsoavailable in 800, 1000, 1250mm stroke lengths. Special lengths are alsoavailable on request.

250 - 500kgs

3000 - 10000kgs

1000kgs

1500kgs



95

ZWW WALL MOUNTED RACK AND PINION JACKSLi

ft

Ra

ck l

en

gth

Ra

ck l

en

gth

Lift

Gear type WORM GEAR SPUR GEAR SPUR GEAR Load safety Self-lock Sifeku Siku Article no. 030052000 030053007 030054003 040055131 040056138 040057134 040058009

Lifting capacity kgs 250 500 1000 1500 3000 5000 10000

Lift ea. crank turn mm 11 11 3,8 14 8,6 4,5 3,2

Crank force daN 11 16,5 22 28 28 28 40

Rack length mm 740 895 765 1090 975 1170 1240

Lift mm 550 700 600 800 565 700 700

Weight kgs 9 10 11 11 19 28 55

A mm 35 35 35 35 45 50 60

B mm 25 25 25 25 30 40 50

C mm 100 100 105 215 280 330 380

DØ mm 16 16 21 21 21 21 30

E mm 20 20 20 20 25 25 30

F mm 109.5 109.5 100 135 165 140 160

G mm 133 133 134 151 212 219 269

H mm 195 195 160 310 395 400 480

I mm 188 188 155 168 179 197 200

J mm 47.5 47.5 29.5 26 31 37 39.5

K mm – – 100 100 120 120 140

L mm 52 52 130 130 160 160 180

M mm 165 165 140 260 305 320 410

NØ mm 12.5 12.5 12.5 12.5 14.5 17 21

O mm 70.5 70.5 50 110 120 105 125

P mm – – 40 40 50 50 60

Q mm 12 12 8 8 10 10 10

R mm 165 220 165 250 250 250 300

S mm 130 130 130 130 130 130 250

T mm 44.5 44.5 46.8 42.4 86.25 109.1 150.4

U mm – – 44 43.3 53.1 69.5 88.3

X mm 32 32 25 20 25 45 30

Price £ £293 £345 £433 £790 £820 £850 £1450

250 - 500kgs1000kgs 1500 - 10000kgs

Ra

ck l

en

gth

Lift



96

SCH-W SLUICE GATE JACKS

3000kgs

1500 - 3000kgs

5000 - 10000kgs

Rack length

Center of

rack

Lift

Bottom edge of housing

with retracted rack.

Rack length Lift

Bottom edge of housing

with retracted rack.

Crank design

Spring loaded safety crank.

Spring loaded safety lockand plug-in crank.

Safety crank

Article no. 030029130 030030139 030031135 030032018

Crank type Sifeku Sifeku Sifeku Siku

Lifting capacity kgs 1500 3000 5000 10000

Pressure force* kgs 1000 2000 3000 6000

Rack length mm 1200 1250 1350 1550

Lift mm 800 800 900 1000


A mm 35 45 50 60

B mm 25 30 40 50

C mm 140 160 145 165

D mm 85 60 45 65

E mm 125 204 189 235

F mm 78 92 100 112

G mm 175 230 260 320

H mm 310 395 400 480

I mm 33.5 39.5 51 59

J mm 43.3 53.1 69.5 88.3

K mm 121 138 81 84

L mm 230 230 230 290

M mm 90 90 90 115

N mm 153 158 173 183

O mm 52.5 55 61 66

P mm 52.5 55 64 70

QØ mm 14 14 14 14

R mm 7 7 7 8

S mm 76.5 85.5 88 100

T mm 100.5 108.5 120 140

U mm 113 121 132 185

V mm 86 94 105 –

W mm 136 144 155 –

X mm 130 130 130 250

Y mm 250 250 250 300

Price £ £670 £998 £1050 £1571

*Load case II according to Euler – the pressure force will be reducedwith higher lift.

SCH-W, sluice gate jack systems with rack and pinon drive

Capacities 1500 - 10000kgs

Sluice gate systems are used primarily in water power, agriculture and plant engineering.Different crank types and layouts present hundreds of possible arrangements.

Features and benefits include: • Spring loaded safety crank provides pressure when required. • 10000kg model supplied with a SIKU crank, others supplied with a SIFEKU crank. • Slide lacquer treated racks. • Spur gear with formed gearwheels. • Precisely milled crank gear.

Options: • Extended rack lengths. • Galvanised finish.



SIFEKU SAFETY RATCHET CRANKS

SIKU SAFETY RATCHET CRANKS

RAKU SAFETY RATCHET CRANKS

97

Siku

Safety ratchet crank (SIFEKU) Cast aluminium crank with folding handle. Spring operated load pressure brake is silent in operationand weather-resistant, no ratchet required. 250mm radius for use on jacks up to 5000kgs capacity.

Features and benefits include: • Without pawl - silent in operation. • Recoil proof. • Maintenance free. • Totally enclosed. • Weather and temperature resistant. • Braking effect at both ends. • At every height the load is securely held in the pushing and pulling direction • With folding handle.

Safety ratchet crank (SIKU) This crank is used with a double acting pawl assembly and is suitable for indoorapplications. The crank is of cast steel with folding handle and incorporates twoconical nylon or brass brake discs, dependant on duty, which act as a friction brake.Two versions are available: 14mm or 17mm square hole.

Features and benefits include: • With one-sided braking effect. • The load is held securely at every height. • With folding handle.

Safety ratchet crank (RAKU) Similar to the SIKU crank this unit has a selector unit which allows either the raise or lowerpositions to be selected. The crank can either be turned through 3600 (as the SIKU crank)or operated in short ratchet type movements which is especially suited for use in confined spaces. Two versions are available: 250mm or 300mm crank length.

Features and benefits include: • The load is securely held at every height. • Lift by moving the ratchet upwards and downwards. • Adjust the lifting or lowering movement by moving a lever. • With folding handle.

Raku

SifekuArticle number Square drive (mm) Crank length (mm) Weight Price

040004581 14 250 1.6 £91040003433 17 250 1.6 £91

Article number Square drive (mm) Crank length (mm) Weight Price

040006026 14 250 1.2 £135040005461 17 250 1.2 £135

Article number Square drive (mm) Crank length (mm) Weight Price

040004840 17 250 1.9 £166040008213 17 300 3.5 £170



STANDARD WORM GEAR SCREW JACKS

ACTUATORS MOTION TECHNOLOGY

98

*

Model: SHE • 14 different sizes.• Lifting capacities of 5 to 2000kN.• Drive-motor speeds of up to 1500 rpm.• Self-locking trapezoidal screw.• Grease-lubricated configuration.• Worm gear pairs in two ratio steps; normal ‘N’ and slow ‘L’.• Worm-drive shaft is case-hardened and ground.

STANDARD WORM GEAR SCREW JACKS

Model: MERKUR • 9 different sizes in cubical design.• Lifting capacities of 2.5 to 500kN.• Drive-motor speeds of up to 1500 rpm.• Self-locking trapezoidal screw.• Grease-lubricated configuration.• Worm gear pairs in two ratio steps; normal ‘N’ and slow ‘L’.

‘HIGH PERFORMANCE’WORM GEAR SCREW JACKS

Model: HSE • 9 different sizes.• Lifting capacities of 5 to 1000kN.• Drive-motor speeds of up to 3000 rpm.• Self-locking trapezoidal screw.• Separate lubricating circuits: Tr screw with grease-lubrication, worm gears with oil-splash lubrication.• Worm gear pairs in two ratio steps; normal ‘N’ and slow ‘L’.• Worm-drive shaft is case-hardened and ground.

‘QUICK-LIFT’ SCREW JACKS

Model: SHG • 4 different sizes.• Lifting capacities of 15 to 90kN.• Lifting speeds of up to 19m/min.• Drive-motor speeds of up to 3000 rpm.• Self-locking trapezoidal screw.• Separate lubricating circuits: Tr screw with grease-lubrication, worm gears with oil-splash lubrication.• Bevel gears in two ratio steps; 2:1 and 3:1• Gearing is case-hardened and ground.

Introduction

As the leading manufacturer of moving, lifting & handling equipmentin the global market, Columbus McKinnon Corporation (CMCO)understand the requirements for specialised lifting and handlingequipment solutions.

In the fast moving, specialised engineering market of today,innovation is required to provide the solutions to this demandingindustry sector.

As part of our global brands, Pfaff-silberblau , Duff-Norton and Altecare recognised as international market leaders in manufacturingand providing the drive systems for the actuator and linear motionindustry.

To support this innovation we have created a solid technologicalproduct base reinforced with product reliability and the flexibility to solve our customer’s needs.

The integration of a long history and experience supplying completeand complex drive systems allied with the latest manufacturingtechnology of design, engineering and a competitive range of thehighest quality solutions ensure peace of mind to our customers.

Our experienced design and engineering team will support yourproject through the design stage with consultations and with ourcombined experiences provide a seamless integration from designto quotation and finally to installation and commission.

You the customer can only profit from the combined synergies ofour specialised knowledge of design criteria, assured quality,installation, service maintenance andlegal conformity for all of your actuatorand linear motion requirements.

To find out further information on ourfull product range, please call ourActuator sales team on: 01244 391119and request a copy of the new ScrewJack Compendium.



Product range: • Capacities from 25 to 25,000lbs (0.11 to 11.13kN).• Speeds up to 2.4in/sec (61mm/sec).• Stroke lengths up to 24in (609.6mm).• Multiple AC & DC voltages.• Custom actuators available.

Commercial actuators:• Capacities to 1350lbs (6kN).• Speeds up to 1.8in/sec (45.7mm/sec).• Stroke lengths up to 24in (609.6mm).• Multiple AC & DC voltages.• Custom actuators available.

Features & benefits:

• Manufacturing actuators for over 40 years.• Excellent replacement for hydraulic cylinders.• 3D modeling capability is available on: www.duffnorton.com or www.pfaff-silberblau.com• QuickShip program - 24hr shipping.

ACTUATORS MOTION TECHNOLOGY

99

Product range:• High speeds up to 379in/min (160mm/sec).• High capacities up to 50,000lbs (222.5kN).• Stroke lengths up to 13 feet (3.96 metres).• Controls.• Continuous duty ratings (SCN).• Ball screw or acme screw.• Low power requirements (SCN).• Aluminium bronze worm gears (SCW series).• Helical & helical bevel gears (SCN series).• Clevis mounting or trunnion mounting.

Features & benefits:• Excellent replacement for hydraulic cylinders.• Broadest combination of speeds and capacities in the industry.• Durable construction. Less maintenance and longer service.• 3D modeling capability.

ELECTRIC CYLINDERSLINEAR ACTUATORS

• Automotive • Construction • Ergonomics• Food & beverage • Health & fitness • Industrial machinery• Marine • Material handling • Packaging • Transportation

Product range:• Acme screws from 1/2” dia to 9” dia.• Precision ball screws from 1/2” dia. to 4” dia.• Multiple screw lead options.• Thread mounted acme nuts and flanges, many nuts are available in bronze or plastic.• Thread mounted ball nuts and flanges.• Full system integration with a complete line up of linear motion accessories available.

Features & benefits:• Acme & ball screws with excellent load ratings.• All products are provided with tight tolerances and lead control.• Acme nuts are made from excellent materials designed to yield high strength, long life and low torque requirements.• Ball screws are maganese phosphate coated for long life and smooth ‘break-in’ periods.

ACME AND BALL SCREWS & NUTS

Product range:• Rotary unions: For water, air, steam and hot oil applications.

• Available in sizes from 1/8” to 6” inside dia.

• Mono & dual flow designs.• Multi-port units for special applications.

• Swivels: For hydraulic and pneumatic applications.• Available in sizes from 1/8” to 12” inside dia.• Pressures up to 10,000 psi (700 bar).

Features & benefits:• Replaceable cartridge design.• Wide range of general purpose Rotary Unions.• Superior seal design.• QuickShip program - 24hr shipping.

ROTARY UNIONS®



92 SERIES VERTICAL PLATE CLAMPS

Standard plate clamps with safety lockWorking load limit (WLL) 500 - 3000kgs

These clamps are primarily used for transporting sheet metal and steel platesin the vertical position, as well as lifting and rotating through 1800.

They can also be used for transporting steel constructions and profiles.It is recommended to use a pair of plate clamps in conjunction with aspreader beam for long materials which have a tendency to sag or flex.

FunctionThe jaw is opened and closed with the locking lever except for the92-500 which uses a positive spring-loaded cam.

The safety lock spring loads the cam jaw, preventing the clamp fromopening even when there is no load on the jaw.

Workmanship and parts

These plate clamps are service-friendly, making it easy to exchange parts,which are readily available. Clamp repairs are available through the factory,or can be done by a competent person.

NB: The plate surface of the material must have a hardness levelbelow HRC 30/Brinell 300.

Model WLL Jaw (Z) A B C D E F G H I Weight STD Price Price Price

capacity with hook with link link & chain

kgs* mm mm mm mm mm mm mm mm mm mm kgs** £* £* £*

92-500 50 - 500 0 - 16 99 195 29 33 47 50 48 11 15 1.5 £130 N/A N/A

92-1500 150 - 1500 0 - 20 126 225 50 49 70 82 55 13 20 3.0 £152 £152 £209

92-2000 200 - 2000 0 - 32 192 312 80 75 96 100 81 20 24 8 £194 £194 £306

92-3000 300 - 3000 0 - 32 192 320 80 75 96 100 81 30 30 12 £284 £284 £354

PLEASE NOTE: Units are supplied as standard with a hook ring. Link fitting and chain are available on request as a special order.*Per clamp. **Weight per clamp with hook ring.

92 Series plate clamps.Working load limit 500 - 3000kgs.

100

BESTSELLER

Spare parts for the

92 Series plate clamps are

shown on page 218.*



CZ ‘HEAVY DUTY’ VERTICAL PLATE CLAMPS

Heavy duty plate clamps with safety lockWorking load limit (WLL) 1000 - 30000kgs

These clamps are primarily used for transporting sheet metal and steel plates in the verticalposition, as well as lifting and rotating through 1800.

They can also be used for transporting steel constructions and profiles. It is recommendedto use a pair of plate clamps in conjunction with a spreader beam for long materials whichhave a tendency to sag or flex.

FunctionThe jaw is opened and closed with the locking lever. The safety lock spring loads the camjaw, preventing the clamp from opening even when there is no load.

Workmanship and partsThese plate clamps are service-friendly, making it easy to exchange parts, which are readilyavailable. Clamp repairs are available through the factory, or can be done by a competentperson.

PLEASE NOTE: Units are supplied as standard with a hook ring. Link fitting and chain are available on request as a special order.Also available with ‘Sharp Leg’ body shell or extra thick shell plates for dragging. Please contact sales team for further details and prices.*Per clamp. **Weight per clamp with hook ring.

NB: The plate surface of the materialmust have a hardness level belowHRC 30/Brinell 300.

Model WLL Jaw (Z) A B C D E F G H Weight STD Price Price Price

capacity with hook with link link/chain

kgs* mm mm mm mm mm mm mm mm mm kgs** £* £* £*

CZ 1 100 - 1000 0 - 20 140 254 51 48 70 83 13 19 4 £152 £152 £209 CZ1L 100 - 1000 20 - 40 161 260 51 48 70 83 20 19 5 £188 £188 £247 CZ 2 200 - 2000 0 - 32 197 323 67 68 93 110 20 20 11 £227 £227 £306 CZ 2L 200 - 2000 30 - 60 228 330 67 68 93 110 20 20 13 £266 £266 £344 CZ 3 300 - 3000 0 - 32 197 371 80 68 93 110 20 30 12 £284 £284 £354 CZ 3L 300 - 3000 30 - 60 228 390 80 68 93 110 20 30 15 £312 £312 £391 CZ4 480 - 4000 0- 32 197 371 80 68 93 129 20 30 12 £298 £298 £377 CZ 4L 480 - 4000 30 - 60 228 390 80 68 93 129 20 30 18 £343 £343 £421 CZ 6 720 - 6000 0 - 50 293 484 89 95 143 129 25 35 21 £359 £359 £454 CZ 6L 720 - 6000 50 - 100 362 524 89 95 143 129 25 35 28 £417 £417 £479 CZ 8 960 - 8000 0 - 50 293 492 89 95 143 129 25 42 26 £394 £394 N/A CZ 8L 960 - 8000 50 - 100 362 524 89 114 143 129 25 42 32 £517 £517 N/A CZ 10 1500 - 10000 0 - 50 293 545 110 95 143 139 25 45 30 £542 £542 N/A CZ 10L 1500 - 10000 50 - 100 362 545 110 114 143 139 25 45 37 £713 £713 N/A CZ 12 1800 - 12000 0 - 50 360 613 130 125 162 154 30 55 54 £686 £686 N/A CZ 12L 1800 - 12000 50 - 100 460 678 130 175 162 154 30 55 63 £856 £856 N/A CZ 15 3000 - 15000 0 - 50 360 613 130 125 162 204 45 55 75 £1180 £1180 N/A CZ 15L 3000 - 15000 50 - 100 460 678 130 175 162 204 45 55 88 £1356 £1356 N/A CZ 20 4000 - 20000 0 - 65 462 755 130 165 210 235 45 65 123 N/A £1889 N/A CZ 20L 4000 - 20000 65 - 130 560 805 130 195 210 235 45 65 136 N/A £2160 N/A CZ 30 6000 - 30000 0 - 65 462 732 60 165 210 295 65 - 195 N/A £2659 N/A CZ 30L 6000 - 30000 65 - 130 560 797 60 195 210 295 65 - 295 N/A £3066 N/A

Welded shellconstruction.

101

Spare parts for the CZ plate

clamps are shown on page 219.*



CY ‘HINGED’ VERTICAL PLATE CLAMPS (TWO LEG CHAIN SLING)

CX ‘HINGED’ VERTICAL PLATE CLAMPS (HEAVY DUTY - SIDE LOADING)

CY1 200 - 1000 0 - 20 126 270 50 49 70 95 63 12 23 4.6 £216

CY2 400 - 2000 0 - 32 192 382 80 75 96 132 92 20 30 14 £293

CY3 600 - 3000 0 - 32 192 382 80 75 96 132 92 20 30 14 £317

The CY plate clamps with hinged hook rings can be used for the safe handlingof plate at various angles. It can lift plate from the horizontal and put down inthe vertical. The hinged hook ring ensures adequate gripping pressure in everyposition, but the load capacity is reduced as seen in the diagram belowshowing the load / force capacities.

The main benefit of the CY hinged plate clamps is that longer plates can belifted or handled, using two clamps on a two legged chain sling (as shown inillustration), thus eliminating the need for a spreader beam.

Model WLL Jaw (Z) A B C D E F G H I Weight Price capacity kgs* mm mm mm mm mm mm mm mm mm mm kgs** £*

CX1500 225 - 1500 0 - 20 140 399 63 125 12.5 48 70 57 83 7 £275 CX3000 450 - 3000 0 - 32 197 515 67 138 19 68 93 81 110 12 £389 CX3000L 450 - 3000 30 - 60 227 515 67 138 19 68 93 81 110 15 £447 CX4500 675 - 4500 0 - 50 292 737 95 176 28 95 143 137 188 32 £535 CX6000 1200 - 6000 0 - 50 292 737 95 176 28 95 143 137 188 38 £570 CX6000L 1200 - 6000 50 - 100 367 785 98 180 28 115 143 135 188 48 £753 CX8000 1600 - 8000 0 - 50 292 737 98 176 28 95 143 136 210 39 £756 CX8000L 1600 - 8000 50 - 100 367 785 98 180 28 115 143 136 210 51 £843 CX10000 2000 - 10000 0 - 50 360 903 110 195 33 125 162 170 223 61 £1008 CX10000L 2000 - 10000 50 - 100 446 921 112 195 33 168 162 170 223 76 £1318

Typicalapplication.

Model WLL Jaw (Z) A B C D E F G H I Weight Price capacity kgs* mm mm mm mm mm mm mm mm mm mm kgs** £*

*Per clamp. **Weight per clamp without chains.

*Per clamp. **Weight per clamp without chains.

Typical application.

Hingedhookring.*

102

NB: The plate surface of thematerial must have a hardnesslevel below HRC 30/Brinell 300.

The CX plate clamps shares all the benefits of the CY clamps, but arespecifically designed for more heavy duty applications.

The other benefit that the CX clamps offers over the CY clamps is that verticallyracked plates can be turned through 900 (as shown in illustration).

NB: The plate surface of the material must have a hardness level belowHRC 30/Brinell 300.

Spare parts for the CY plate clamps are shown on page 220.*

Spare parts for the CX plate clamps are shown on page 221.*



HG ‘HIGH GRIP’ VERTICAL PLATE CLAMPS

TJC ‘TWIN JAW’ VERTICAL PLATE CLAMPS

Model WLL Jaw (Z) A B C D E F G Weight Price capacity kgs* mm mm mm mm mm mm mm mm kgs** £*

HG500 25 - 500 0 - 10 42 230 148 10 55 79 50 5 £321 HG1000 50 - 1000 0 - 16 93 297 210 16 75 114 67 12 £385 HG2000 200 - 2000 0 - 20 110 416 305 20 102 159 80 22 £533 HG3000 300 - 3000 0 - 20 110 416 305 20 102 159 80 28 £601 HG3000L 300 - 3000 20 - 40 110 416 325 20 102 159 80 28 £627 HG4000 400 - 4000 0 - 20 120 335 305 20 102 159 80 34 £786 HG4000L 400 - 4000 20 - 40 120 335 325 20 102 159 80 34 £825

Vertical ‘high grip’ plate clamps forhardened material Working load limit (WLL) 500 - 4000kgs

HG plate clamps have an extremely high clamping force which makes the clamps particulars suitedto the transport of plate with a surface hardness up to HRC 40/Brinell 375.

NB: The plate surface of the material musthave a hardness level below HRC 40/Brinell375.

FunctionThese clamps are opened and closed with alocking lever. The safety lock spring loads thecam jaw, preventing the clamp from openingeven when there is no load.

Workmanship and partsThese plate clamps are service-friendly, makingit easy to exchange parts, which are readilyavailable. Clamp repairs are available throughthe factory, or can be done by a competentperson.

*Per clamp. **Weight per clamp.

TJC300 20 - 300 0 - 30 3 £257

TJC300L 20 - 300 30 - 60 3 £294

TJC300XL 20 - 300 60 - 90 4 £341

TJC300XXL 20 - 300 80 - 110 5 £406

Model WLL Jaw capacity Weight Price kgs* mm kgs** £*

The TJC twin jaw vertical plate clamps have been specifically designed for lifting steel plates. Themain difference, however between the TJC and the CZ (which is our standard vertical plate clamp) isthat the TJC has a unique twin moving jaw arrangement.

The design of the twin moving jaws means that the TJC can be used in applications that require a largerthan usual jaw capacity but with a low minimum weight.

NB: The plate surface of the material must have a hardness level below HRC 30/Brinell 300.

PLEASE NOTE: Please contact our sales team for full technical drawings if required.*Per clamp. **Weight per clamp.

103



CH/HH HORIZONTAL PLATE CLAMPS

Model WLL Jaw A B C D E F G Weight Price* Price capacity ‘smooth’ ‘serrated’ jaw (std) jaw kgs* mm mm mm mm mm mm mm mm kgs** £* £*

CH1*** 1000 5 - 32 15 82 60 100 32 44 13 8 £155 £202 CH2 2000 5 - 32 30 82 60 100 50 73 18 11 £189 £246 CH2L 2000 20 - 50 30 82 60 100 50 73 18 12 £211 £274 CH4 4000 5 - 50 40 112 80 100 64 92 25 17 £247 £321 CH4L 4000 50 - 100 40 112 80 100 64 92 25 23 £276 £359 CH6 6000 5 - 75 55 172 100 130 90 130 35 46 £326 £424 CH6L 6000 50 - 125 55 172 100 130 90 130 35 56 £370 £442 CH8 8000 5 - 75 55 172 105 130 90 130 35 53 £397 £511 CH8L 8000 50 - 125 55 172 105 130 90 130 35 60 £440 £572 CH10 10000 5 - 100 65 215 120 150 114 114 35 95 £545 £677 CH10L 10000 50 - 150 65 215 120 150 114 114 35 108 £630 £852 CH15 15000 5 - 100 71 230 120 150 114 114 35 110 £793 £1015 CH15L 15000 50 - 150 71 230 120 150 114 114 35 123 £864 £1107 CH20 20000 5 - 100 70 220 118 220 80 120 38 165 £1386 £1697 CH20L 20000 50 - 150 70 220 118 220 80 120 38 172 £1461 £1794

HH8 8000 5 - 50 55 168 105 130 67 67 24 21 £410 £653 HH8L 8000 50 - 100 55 168 105 130 67 67 24 28 £474 £720

Industry standard horizontal plate clampsWorking load limit (WLL) 1000 - 10000kgs

The CH horizontal plate clamps have been specifically designed to be used, in pairs, for thetransportation of plate bundles as well as single plates with a minimum thickness of 5mm.

A pair of clamps used with a two legged chain sling are suitable for small plates. It isrecommended to use two pairs in conjunction with a spreader beam for handling of larger plates,These units are supplied as standard with a smooth jaw. There is also the option of hardenedsteel teeth for special applications. Please contact our technical department for further details.

The HH horizontal plate clamps incorporate all of the features of the CH clamps, yet aremanufactured from high strength steel giving them exceptionally low tare weights.

Workmanship and partsThese plate clamps are service-friendly, making it easy to exchange parts, which are readilyavailable. Clamp repairs are available through the factory, or can be done by a competentperson.

*Per pair. **Weight per pair of clamps without chains. ***NB. CH1 is fitted with a single jaw.

*Chain slings NOT included.

CH with serrated jaw whichcan only be used for singleplates, NOT bundles.

For short platesuse single pair.

NB: The angle between the chain / rope legsmust not exceed 450 from vertical.

For long plates use spreader beam.

SOLDIN

PAIRS*

104

NB: These units must NOT be usedwith endless chain slings.

!



RH/WH/WHL/WHP HORIZONTAL PLATE CLAMPS

Model WLL Jaw A B C D E F G H J K L M N P R S T Weight Price

(per pair) capacity (per pair) (per pair)

kgs* mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm kgs** £*

RH1500 1500 5 - 60 5 60 60 105 250 200 22 30 12 50 73 18 36 65 120 100 10 12 £216 RH2500 2500 10 - 70 10 70 75 130 135 275 38 30 12 64 92 25 58 77 150 100 10 21 £274 RH3500 3500 10 - 80 10 80 90 162 345 292 48 30 15 64 92 25 65 105 185 100 10 28 £336 RH5000 5000 10 - 102 10 102 110 170 425 345 45 45 20 89 130 35 80 120 210 120 12 72 £496

WH1500 1500 5 - 60 5 60 60 105 250 200 22 30 12 50 73 18 36 65 120 100 10 12 £227 WH2500 2500 10 - 70 10 70 75 130 135 275 38 30 12 64 92 25 58 77 150 100 10 21 £287 WH3500 3500 10 - 80 10 80 90 162 345 292 48 30 15 64 92 25 65 105 185 100 10 28 £352 WH5000 5000 10 - 102 10 102 110 170 425 345 45 45 20 89 130 35 80 120 210 120 12 72 £535

WHL1500 1500 5 - 55 5 55 60 105 256 209 31 30 12 50 73 18 36 65 120 100 13 12 £249 WHL2500 2500 10 - 65 10 65 75 130 324 273 45 30 12 64 29 25 58 77 150 100 13 21 £317 WHL3500 3500 10 - 75 10 75 90 162 345 291 55 30 15 64 92 25 65 105 185 100 13 28 £387 WHL5000 5000 10 - 97 10 97 110 170 429 345 55 45 20 89 130 35 80 120 210 120 15 72 £550 510 WHP1500 1500 5 - 57 5 57 60 105 256 209 31 36 12 50 73 18 39 68 126 100 13 12 £337 WHP2500 2500 10 - 67 10 67 75 130 324 273 45 36 12 64 92 25 61 80 156 100 13 21 £402 WHP3500 3500 10 - 77 10 77 90 162 345 291 55 36 15 64 92 25 68 108 191 100 13 28 £469 WHP5000 5000 10 - 100 10 97 110 170 429 345 55 51 20 89 130 35 83 123 216 120 15 72 £586CO

ATIN

G

LININ

G

TEET

H

ROLL

ER

*

WH Horizontal plate clamps.Working load limit 1500 - 5000kgs*.

Model: RHClamp with

‘Roller’

Model: WHPClamp with

‘Coating’

Model: WHClamp with

‘Teeth’*

*

Horizontal plate clampsWorking load limit (WLL) 1500 - 5000kgs

This range of horizontal plate clamps has been designed, to be used in pairs, for the horizontal transporting of individual and bundled plate. Whilst the basic design and function is the same, there are four options available. OPTION 1 - RH. This range is fitted with a steel roller for reduced marking of the plates. OPTION 2 - WH. The jaw on this range has hardened steel teeth for applications where the marking of plates is not an issue. OPTION 3 - WHL. With a protective plastic lining on the jaw and the toe plate, this range totally eliminates any risk of marking. OPTION 4 - WHP. With a protective polyurethane coating completely encasing the jaw and the toe plate.

OPTION 2

*Per pair. **Weight per pair of clamps without chains.

SOLDIN

PAIRS*

105

OPTION 1

OPTION 4 OPTION 3

*Model: WHLClamp with

‘Lining’



ACH ‘ADJUSTABLE’ HORIZONTAL PLATE CLAMPS

THK ‘THIN SHEET’ HORIZONTAL PLATE CLAMPS

THS ‘LOADING’ HORIZONTAL PLATE CLAMPS

PLEASE NOTE: Other sizes are available on request. Please contact our sales team details.*Per pair. **Weight per pair of clamps without chains.

ACH 1300 1300 0 - 150 14 £610 ACH 1300L 1300 0 - 250 17 £639 ACH 3300 3300 0 - 150 25 £782 ACH 3300L 3300 0 - 250 28 £803 ACH 6650 6650 0 - 150 60 £989 ACH 6650L 6650 0 - 250 64 £1010 ACH 10000 10000 50 - 300 82 £1486


The ACH horizontal plate clamps offer superb flexibilitybecause of the large adjustable jaw opening. The jaw isadjusted using a simple ratchet mechanism.

These clamps are to be used in pairs and are especiallysuited to the transportation of large plate bundles.

900 Max


THK 750 40 - 750 0 - 25 3 £204 THK 1500 75 - 1500 0 - 35 6 £230 THK 3000 150 - 3000 0 - 35 11 £288 THK 4500 225 - 4500 0 - 45 16 £322 THK 6000 300 - 6000 0 - 60 23 £347 THK 9000 450 - 9000 0 - 60 35 £439


*Ideal for thin sheet.

The THK horizontal plate clamps share the same basic design features asthe CH range of clamps but have a reversed tooth jaw design. This acts asan additional safety feature specifically for use with thin sheets which mayhave a tendency to deflect or sag or flex.

The THK clamps are particularly suited to thin plate with a surface hardnessless than 300 Brinell / 32 Rockwell C.

600 Max


THS 750 40 - 750 0 - 20 3 £313 THS 1500 75 - 1500 0 - 35 6 £399 THS 3000 150 - 3000 0 - 40 12 £613 THS 4500 225 - 4500 0 - 45 17 £804


The THS horizontal plate clamps are specifically designed to be used when loading plate horizontallyinto presses, shears, guillotines and other industrial machines or where the CH clamps are not suitable.

The unique design of the THS allows them to be used individually when loading plate. However, whentransporting plate horizontally the THS clamps should be used in pairs.

Other features of this clamp include a spring loaded safety lock that ensures the clamp remains on theplate in the unloaded position prior to lifting. Maximum plate surface hardness 300 Brinell / 32 Rockwell C.

Spring loadedsafety lock.

*Use spreader beams for larger plates.

PLEASE NOTE: Please contact our sales team for full technical drawings if required.*Per pair. **Weight per pair of clamps without chains.

PLEASE NOTE: Please contact our sales team for full technical drawings if required.*Per clamp. **Weight per pair of clamps without chains.


106



TAG/TWG ‘WIDE JAW’ UNIVERSAL CLAMPS

*Model: TWG

TWG universal grab is avariation of the TAG. It isspecially designed with asmall outside measurementfor use on hard to reach placessuch as loading billets on toa lathe etc.

Model WLL Jaw A B C D E F G H I J K Weight Price capacity kgs* mm mm mm mm mm mm mm mm mm mm mm mm kgs* £*

TAG 350/100 35 - 350 0 - 100 264 259 128 100 100 85 550 75 121 20 78 9 £295 TAG 350/200 35 - 350 90 - 200 382 434 195 156 200 120 760 75 121 20 90 14 £399 TAG 750/100 75 - 750 0 - 100 264 259 128 100 100 85 550 75 121 20 83 9 £359 TAG 750/200 75 - 750 90 - 200 382 434 195 156 200 120 760 75 121 20 90 15 £436 TAG 1250/100 125 - 1250 0 - 100 320 289 128 100 100 85 570 75 121 20 83 15 £361 TAG 1250/200 125 - 1250 90 - 200 382 434 195 156 200 120 760 75 121 20 90 26 £479 TAG 2000/100 200 - 2000 0 - 100 328 415 135 115 100 105 571 75 121 20 105 22 £451 TAG 2000/200 200 - 2000 90 - 200 375 515 195 165 200 160 750 75 121 20 105 30 £541 TAG 3000/90 360 - 3000 5 - 90 297 290 136 106 90 91 570 82 111 32 137 25.5 £572 TAG 5000/90 600 - 5000 5 - 90 297 290 136 106 90 91 570 82 111 32 147 30 £710 TAG 10000/100 1500 - 10000 0 - 100 405 423 160 130 100 160 720 102 144 40 208 70 £1591 TAG 10000/200 1500 - 10000 100 - 200 440 562 200 175 200 183 840 102 144 40 208 101 £2002

TWG 350/100 35 - 350 30 - 100 335 210 126 87 104 35 615 75 121 20 78 11 £340 TWG 750/200 75 - 750 100 - 200 387 371 195 150 204 53 715 75 121 20 83 16 £467 TWG 1250/200 125 - 1250 100 - 200 387 374 195 150 204 60 731 75 121 20 90 25 £481 TWG 2000/100 200 - 2000 30 - 100 345 287 135 118 104 73 571 75 121 20 105 23 £495

The TAG universal clamps are extremely versatile. They have a large jaw capacity that enablesthem to be used on a multitude of applications such as loading machine tools, steel constructions,welding and numerous assembly duties. The design means that they do not require additional chainslings and are very easy and simple to use.

The automatic gripping force is retained by a positive tension jaw spring, even if there is slack in thechain. The clamps are also fitted with a ‘Quick-Open’ lever for ease of loading and unloading.

These clamps are service-friendly, making it easy to exchange parts, which are readily available.Clamp repairs are available through the factory, or can be done by a competent person.

Protective lined jaws can be fitted up to 1250kgs WLL. Call our sales team for prices and availability.

TAG 750/100

*Per clamp.

107

Quick openlever.



LJ ‘NON-MARKING’ PLATE CLAMPS

TSB NON-MARKING ‘FRICTION’ PLATE CLAMPS

Model WLL Jaw A B C D E F G H I Weight LJR LJP LJL capacity (Rubber) (Plastic) (Leather) Price Price Price kgs* mm mm mm mm mm mm mm mm mm mm kgs** £* £* £*

LJ.....500 25 - 500 0 - 10 127 200 55 52 69 86.5 76 13 20 3.5 £283 £298 £283 LJ.....1500 180 - 1500 0 - 20 215 345 85 75 135 131 118 20 24 12 £462 £285 £462

The LJ non-marking plate clamps are designed for lifting, turning and transporting of all structuralsteel plates, stainless steel, iron, timber and aluminium without marking, damaging or leavingindentations on the surface. It can also be used for plates with extremely hard surfaces.

These clamps are available with three different types of pads. There is the option of rubber, plastic orleather lined pads dependant on the surface of the material. If you have any concerns regarding thebest option for your application please contact oursales team for advice.

These plate clamps are service-friendly, making it easyto exchange parts, which are readily available. Clamprepairs are available through the factory, or can bedone by a competent person.

NB: The surface of the plate must befree of oil, grease or any other liquidto ensure safe transport.

Model WLL Jaw A B C D E F Weight Price capacity kgs* mm mm mm mm mm mm mm kgs* £*

TSB 350/65 20 - 350 0 - 65 270 260 128 100 65 78 8 £504 TSB 750/65 40 - 750 0 - 65 270 260 128 100 65 78 9 £618 TSB 1250/65 125 - 1250 0 - 65 270 260 128 100 65 78 12 £740

The TSB non-marking plate clamps with chain are designed for vertical lifting and transporting ofplate material. This particular range of clamps has a large jaw capacity that enables it to be used on amultitude of applications.

The main feature of the TSB plate clamps is the fact that it is non-marking. It works through the processof ‘friction’. This is achieved by a specialmaterial on the jaw and pad which issimilar to brake linings.

Other benefits of the TSB, is that one grabcan also be used for lifting materials suchas concrete, wood, stone, and hardenedsteel.

These plate clamps are service-friendly,making it easy to exchange parts, whichare readily available. Clamp repairs areavailable through the factory, or can bedone by a competent person.

NB: The surface of the plate must be freeof oil, grease or any other liquid to ensuresafe transport.

*Per clamp. **Weight per clamp.

*Per clamp.

108



109

TSS NON-MARKING GRAB WITH SCREW SPINDLE

Model WLL Jaw A B C D E F G H I Weight Price capacity kgs* mm mm mm mm mm mm mm mm mm mm kgs* £*

TSS 0,75 750 0 - 16 50 235 78 72 16 163 12 18 73 6 £635

TSS 1,50 1500 5 - 25 70 285 100 86 25 200 16 20 86 9.3 £727

TSS 3,00 3000 5 - 30 82 315 120 95 30 226 20 30 100 15.8 £862

*Per clamp.

DTC DROP TEST CLAMPSNEW

MODEL

NEWMODEL

Model WLL Link dia. Weight Price kgs mm kgs £

DTC2 2000 25 15 £1923 DTC3 3000 25 18 £2250 DTC6 6000 25 32 £2978 DTC12 12000 36 88 £3453 DTC25 25000 45 126 £3835

TSS non-marking grab with screw spindle is designed for use on stainless steel plates.

This non-marking grab for heavier loads secures its load through a special wedgemechanism. The sliding jaw is manually set to the pre-tension position with a removablehandle that is placed on a screw spindle head. During the lifting cycle, the tensioninglever exerts an extra high clamping pressure via a high transmission ratio onto the slidingjaw which is thereby held tight by a ‘friction locking effect’. The contact pressure pro-duced is further enhanced by the inclined plane on which the wedge shaped jaw slides.The grab comes with aluminium and stainless steel jaws for the non-marking transportof loads with sensitive surfaces.

These clamps are service-friendly, making it easy to exchange parts, which are readilyavailable.

NB: The surface of the plate must be free of oil, grease or any other liquid to ensuresafe transport.

The DTC drop test clamp is used to drop loads in a safe and controlled manor.

Ideal for container testing. The load is attached to the clamp by a sling and master link. The clamputilises the two rope method and has an interlock system that will prevent accidental release of theload if one of the release ropes is snagged during the lifting phase of the operation.

The DTC drop test clamps are available in capacities from 2000 - 25000kgs.



YRC ‘REINFORCED’ BEAM CLAMPS

YC ‘STANDARD’ BEAM CLAMPS

YC1 1000 05406181 75 - 230 3.8 £56 YC2 2000 05406182 75 - 230 4.6 £62 YC3 3000 05407417 80 - 320 9.2 £82 YC5 5000 05407418 90 - 320 11.0 £105 YC10 10000 05407419 90 - 320 17.2 £151

Model Capacity (SWL) Article no. Beam width Weight Price

kgs mm kgs £

The YC beam clamp provides a quick and versatile rigging point for hoisting equipment, pulleyblocks or loads and comes complete with a locking device. The unit offers flexible applications,due to the wide adjustment range. The central threaded spindle allows easy attachment and asafe and secure grip to the beam flange.

NB. THIS MODEL MUST NOT BE USED FOR LIFTING.

SC92-1 1000 75 - 210 5.0 £80 SC92-2 2000 75 - 210 6.0 £91 SC92-3 3000 100 - 270 8.0 £115 SC92-3/L 3000 75 - 305 9.0 £156 SC92-5 5000 100 - 270 10.0 £199 SC92-5/L 5000 75 - 305 12.0 £245 SC92-10 10000 75 - 305 19.0 £382 SC92-15 15000 75 - 305 35.0 £595 SC92-20 20000 300 - 410 87.0 £819

Model Capacity (SWL) Beam width Weight Price

kgs mm kgs £

The SC92 beam clamp provides a quick and versatile rigging point for hoisting equipment,pulley blocks or loads. The unit offers flexible applications, due to the wide adjustment range.The central threaded spindle allows easy attachment and a safe and secure grip to the beam flange.


YRC-1 1000 05400030 75 - 230 4.8 £64

YRC-2 2000 05400031 75 - 230 6.2 £77

YRC-3 3000 05400032 80 - 320 12.6 £95

YRC-5 5000 05400033 90 - 320 14.3 £176

YRC-10 10000 05400034 90 - 320 24.0 £279

Model Capacity (SWL) Article number Beam width Weight Price

kgs mm kgs £

Standardsuspension

point.

Shacklesuspension point.

Reinforced beam clamps


Camlok have now designed a brand new range ofreinforced beam clamps. The YRC clamps have all thestandard features associated with the SC range of clampsbut have the added benefit of being extremely tough androbust, due to the reinforced side plates and jaws. Thisdesign change makes them a very safe attachment point,even under demanding conditions.


Comparison: YRC (left),with standard SC (right).Reinforced side plates.

SC92 BEAM CLAMPS WITH SHACKLE

110

BESTSELLER



SCA ‘ANGLE CLAMP’ BEAM CLAMPS

SCS 2 2000 80 - 305 8 £123 SCS 3 3000 80 - 305 10 £196 SCS 5 5000 80 - 305 14 £257 SCS 10 10000 80 - 305 20 £452

Model WLL Jaw capacity Weight Price kgs* mm kgs* £*

*Per clamp. • Please contact our sales team for full technical drawings.NB. THIS MODEL MUST NOT BE USED FOR LIFTING.

Swivel jaw.

111

SCS ‘SWIVEL JAW’ BEAM CLAMPS

SCA 500 500 50 - 100 4 £121 SCA 1000 1000 90 - 150 6 £133 SCA 2000 2000 50 - 100 10.5 £154 SCA 3000 3000 90 - 150 19 £201


The SCA screwlok beam clamps offer many of the same features as our other beam clampshowever this range is specifically designed to be attached to rolled steel angle. These arenormally found against the wall of a roof.

SCB BULB BAR CLAMPS

SCB1 1000 60 4 £145 SCB3 3000 83 12 £215

Model WLL Max bulb Weight Price kgs* mm kgs* £*

The SCB bulb bar clamp is a variant of Camlok’s SCA clamp and is particularly useful in theship building industry. The clamp is supplied with with load bar for low headroom and allowseasy attachment of hoist slings etc.

BA0.75 750 80 - 160 3 £134 BA1.5 1500 160 - 240 4 £158 BA3.0 3000 240 - 320 5.5 £242 BA6.0 6000 320 - 430 12.5 £316

Model WLL Max bulb Weight Price kgs* mm kgs* £*

The BA bulb bar anchor has been designed for attachment to bulb profiles, often found in shipcompartments and engine rooms, to provide a semi-permanent lifting point. The clamp can bequickly and easily attached via the screw type mechanism. The fabricated light weight designensures a firm grip onto the bulb section. The unique large bow hook ring gives easy connectionfor all types of lifting machines.

BA BULB BAR ANCHORS

The SCS screwlok beam clamps have been specifically designed for use as a semi-permanent anchor point. This range is fitted with swivel jaws that a give a more positivegrip to the beam flange. These clamps are fitted with a shackle suspension point and arevery quick and easy to attach to the beam by simply turning the threaded middle bar.






CG ‘STANDARD’ GIRDER TURNING CLAMPS

TTR ‘VERTICAL FLANGE’ GIRDER STACKING CLAMPS

TTG ‘HORIZONTAL FLANGE’ GIRDER STACKING CLAMPS

TTG 500 25 - 500 0 - 20 3 £231 TTG 1500 75 - 1500 0 - 30 5.5 £316 TTG 3000 150 - 3000 0 - 35 11 £412 TTG 4500 450 - 4500 0 - 40 14.5 £625 TTG 7500 750 - 7500 0 - 45 28 £830


*Per clamp. • Please contact our sales team for full technical drawings.

The TTG girder clamps are designed for transporting girders in the ‘I’configuration / position (see photograph on the right).

These are ideal for use within steel stockholders. Once offered up tothe horizontal flange of the girder they are locked in place by the jawlocking lever.

The design allows the clamp to be used individually, however for longergirders they should be used in pairs in conjunction with a spreaderbeam.

TTR 750 40 - 750 5 - 16 3.5 £289

TTR 1500 150 - 1500 5 - 25 10 £307

TTR 3000 300 - 3000 5 - 28 12 £502



The main selling point of the TTR girder stacking clamps is the factthat it enables girders to be transported and stacked horizontally. Theseare ideal for use within steel stockholders. Once offered up to thevertical flange of the girder, they are locked in place by the jaw lockinglever.

The design allows the Clamp to be used individually, however for longergirders they should be used in pairs in conjunction with a spreaderbeam.

For longer girders

use two clamps and

a lifting beam.

Fixed hookring.

*

112

The main purpose of the CG girder turning clamps is for the transportation and turningof steel girders (RSJ) through 900 degrees.

They can be used individually or for longer beams used in pairs in conjunction with aspreader beam as shown in diagram.

The clamps are attached to the horizontal flange of the girder and locked in place bythe jaw locking lever. Once lifted the girder will turn through 900 degrees.

CG 1 100 - 1000 0 - 16 6 £218 CG 2 200 - 2000 0 - 32 14 £285 CG 4 400 - 4000 0 - 32 19 £387 CG 6 600 - 6000 12 - 50 37 £500 CG 8 800 - 8000 12 - 50 40 £599





CB BULB SECTION LIFTING CLAMPS

113

CB 750 75 - 750 40 6 £350

CB 1500 150 - 1500 60 12 £401

CB 3000 300 - 3000 83 32 £499

Model WLL Bulb thickness Weight Price kgs* mm kgs* £*

Bulb section clampsWorking load limit (WLL) 750 - 3000kgs

The CB bulb section clamps are to be used when lifting, transporting andturning bulb section plate or fabrications containing bulb section plate up to asurface hardness of HRC 30/Brinell 300.

They attach to the plate from the bulb side and once offered up to the sectionsthey are locked in place by the jaw locking lever.

The design allows the clamp to be used individually, however for longer sectionsthey should be used in pairs in conjunction with a spreader beam.


*Per clamp.

Model WLL Jaw A B C D E F G H Weight Price capacity kgs* mm mm mm mm mm mm mm mm mm kgs* £*

TTT 0.75 750 0 - 20 225 142 70 45 70 106 16 16 3 £273

TTT 1.5 1500 0 - 35 225 180 80 56 70 120 19 20 6 £355

TTT 3.0 3000 0 - 40 225 195 84 60 75 125 19 25 10 £485

TTT 4.5 4500 0 - 45 225 222 105 65 90 147 22 30 16 £653

Horizontal girder clamp(WLL) 750 - 4500kgs

The TTT horizontal girder clamps have beendesigned to be used in pairs and can be used ongirders up to a surface hardness of HRC 30/Brinell 300.

The unique design of the split toe allows long sectionsof girders to be lifted with out the use of a spreaderbeam. This is achieved by using a pair of clampswith a 2-legged chain sling.

Illustration ofuse with two

clamps and a2-legged

chain sling.

TTT HORIZONTAL GIRDER CLAMPS (SPLIT TOE PLATE)



114

CR SINGLE RAIL CLAMPS

RP RAIL PULLING CLAMPS

Model Number of rails WLL Weight Price (standard unit) Price (c/w chain) kgs kgs £ £*

CR1000 1 1000 13 £585 £633 CR2000 1 2000 13 £706 £748 CRT1000 1 1000 13 £618 £667

The CR rail clamps are designed to lift single rails securely andsafely. The CRT is designed to lift tram rail. The clamps aredesigned to fit most types of rail section sizes currently in use. Theclamps have a narrow profile to enable attachment to an individualrail that is stacked side by side with other rails. The clamps arelocked onto the rail-head via a lever operated spring mechanism.It is recommended to use clamps suspended from a lifting beamfor long rail lengths.

Clamps can be supplied with a short length of chain and liftingeye as shown in the illustration. This MUST be specified at thetime of order.

The RP rail pulling clamps are designed to be used whenpositioning lengths of rail. They have been designed to fit moststandard rail currently in use. To pull your length of rail you simpleplace the clamp over the head of the rail, at the end, and tightenthe threaded bar (by hand) until it is clamped on to the rail web.

Once clamped to the rail you are ready to use by attaching thehook of your chain directly on to the shackle at the top of the clampand begin pulling.

To release, simply unscrew the threaded bar and lift clamp fromthe rail.

The units shown are the industry standard. Other sizes are availableupon request. Please contact our engineering team for details.

Model Number of rails WLL Weight Price kgs kgs £

RP1.5 1 1500 6 £313 RP3.0 1 3000 8 £421 RP5.0 1 5000 13 £558

*Chain and lifting hook are not included as standard.

*Chain and liftingeye available as

an optional extra.

*Typical application shot showing a CR1000in use with a D85 Pul-lift an ‘Iron man’.



MR ‘FIXED’ MULTI RAIL GRABS

MRC ‘INTERCHANGEABLE’ MULTI RAIL GRABS

115

Model Number of rails WLL* Weight Price kgs kgs £

MR3 3 5000 84 £2395 MR4 4 5000 108 £2651 MR5 5 5000 132 £3302 MR6 6 6000 156 £3481 MR7 7 7000 180 £3991 MR8 8 8000 204 £4138 MR9 9 9000 228 £4694 MR10 10 10000 252 £5250 MR12 12 12000 300 £6088

*Per clamp. • Please advise rail section when ordering.

Illustrationof MR

Multi-railconfiguration.

The MR Multi-rail grabs have been designed to facilitatethe fast bulk handling of a specific rail section (details to beadvised at time of order).

Rails are locked onto the clamp by swivelling toes thatlocate under the rail-head and top clamp body that rotatesin a cam action pressing a hard rubber lined horizontal beamonto the top of the rail-head. The rubber lined contact beamprevents marking or damage to the rail-head.

Two clamps are recommended at centres of 50 to 60% ofrail length for rails up to 20 mtr long. For rails longer than 20mtr, three clamps at centre distance between outer clampsof 65 to 75% of rail length must be used. (NB. Clamp mustbe within rated WLL).

Rails to be lifted must be stacked with bottom flange toestouching. All rails must be of the same rail section size.

Model Number of rails WLL Weight Top manual Comb manual Top auto Comb auto (complete unit) latch price latch price latch price latch price kgs kgs £ £ £ £

MRC4 4 5000 200 £1158 £1736 £1371 £1846 MRC5 5 5000 230 £1158 £2444 £1371 £2554 MRC6 6 6000 265 £1158 £2783 £1371 £2893 MRC7 7 7000 295 £1158 £3194 £1371 £3205 MRC8 8 8000 330 £1447 £3095 £1660 £3304

• Please advise rail section when ordering.

Illustration ofMRC Multi-railconfiguration.

The MRC Multi-rail grabs have been designed to facilitatethe fast bulk handling of ALL rail sections.

The features and applications of the MRC Multi-rail grabs aresimilar to that of the MR Multi-rail clamps but with the addedbenefit of having interchangeable, modular designed combsections. Various combs sections to suit specific rails can becombined with the same scissor mechanism. Alternativecomb sections are to be purchased separately. Pleasecontact our sales team for further details.

An additional feature of the MRC is that it can be fitted withan automatic open / close device that automatically engagesthe rail sections when the clamp is lifted from the restposition on top of the rails.



TPM PERMANENT LIFTING MAGNETS

TPM permanent lifting magnets are ideal tools for easy, quick and economical transport of heavy objectsmade from ferro-magnetic material. Typical operating areas are workshops and warehouses, loading andunloading of machines as well as construction of jigs and fixtures.

Factors that reduce the magnetic clamping force:-

Air gap: High magnetic forces created by the TPM allow the magnet to clampcomponents through the air gap, however, air gaps will reduce the magneticperformance as they provide a barrier between the contact surfaces. Air gapsoccur in a number of different ways such as paint, dust and heavy mill scale.Poorly machined surfaces also constitute an air gap. Please down rate themagnet capacity in accordance with the adhesive force/air gap diagram below.

Material thickness: If the TPM is used to lift plates thinner than the recommendedminimum thickness, the clamping forces will be significantly reduced. Performance curvescan be identified in conjunction with the adhesive force/flat thickness diagram below:

Contact area: Full lifting capacity can only be achieved when the magnet has full contact area withthe component being lifted. If the contact surface has holes in or is uneven then the performance will beaffected accordingly. Always carry out a trial lift in these circumstances to establish correct lifting beforetransporting the load.

Material type: Certain materials have different abilities to carry magnetism. For materials other than mild steel a reduction factor must be applied in order to calculate the effective clamping force.

Typical values: Ferrous alloy steels 0.8High carbon steels 0.7Cast iron 0.55

Examples of reduced SWL: Mild steel 500gCast iron 500kg x 0.55 = 275kgs

Flat material Round material Model Maximum Minimum Maximum Maximum Diameter Maximum Tear Dimensions Weight Price capacity thickness length capacity length off SWL to obtain of SWL of force A B C D max. SWL material material kgs** mm** mm kgs** mm mm kgs mm mm mm mm kgs £

TPM 1 100 15 2000 50 200-300 2000 300 122 69 185 160 6 £140

TPM 3 300 19 2500 150 200-300 2500 900 192 95 225 250 15.5 £342

TPM 5 500 25 3000 250 200-300 3000 1500 232 120 270 250 29.5 £453

TPM 8 800 35 3500 400 200-300 3500 2400 302 154 320 450 53 £710

TPM 10 1000 40 3500 500 200-300 3500 3000 332 154 320 450 60 £866 **Maximum lifting capacity is achieved by using mild steels with the noted minimum thickness.Mild steel st37 - Fe 360 to BS EN 10 025 1990 (DIN 17100).

100 % 75 % 50 % 0 %

TPM 1000TPM 800TPM 500TPM 300TPM 100

85

80

75

70

65

60

55

50

45

40

35

30

25

20

15

10

5

0

Pla

te t

hic

kne

ss in

mm

Percent of max. capacity

116



THM 120 120 70 84 140 172 1.2 £246 THM 170 170 100 116 140 172 1.7 £311

TPZ BOARD CLAMPS

THM MAGNETIC CLAWS

HGC HAND GRIP CLAMPS

The HGC hand grip clamps are suited for the individual transport of light and thin plates. They havea jaw capacity of up to 10 mm and can lift up to 250kgs.

To operate the clamp you simply press down on the hand grip which compresses a spring. Thisallows the clamp to open and slide onto the plate. The plate can then be lifted and transported usingthe ergonomically designed hand grip. The positive spring pressure prevents the plate fromaccidentally slipping out of the clamp.

NB. Plate surface of material lifted must not exceed a hardness level of HRC 30/Brinell 300.

Opening & closing Transporting

Model Lifting capacity Pulling capacity Width Length Height Weight Price kgs* kgs mm mm mm kgs £

The THM manual magnetic claws are used for manually transporting steelsheets horizontally and vertically. They can also be used for lifting plates fromracks, pulling sheets out of shelving and transporting almost any steel platesthat are magnetic.

These clamps are capable of carrying plate with a thickness of 1 - 5 mm andare totally maintenance free.

They operate by simply placing the claw on to the material. To release the clawthe operator must press down on the handle which activates a cam thatreleases the magnet.

NB: The surface of the plate must be free of oil, grease or any other liquid toensure safe transport.

*Measured at a safety factor 2:1 on bright drawn material St 37 k.

MANUALHANDLING*

TPZ 400 20 - 400 5 - 55 8 £437 TPZ 400L 20 - 400 50 - 100 9 £497 TPZ 750 40 - 750 5 - 60 12 £630 TPZ 750L 40 - 750 60 - 120 14 £697 TPZ 1500 75 - 1500 5 - 75 13 £756 TPZ 1500L 75 - 1500 75 - 150 15 £824


TPZ board clamps offer an simple and effective way to vertically lift and transport a variety ofmaterials such as wood, MDF, plasterboard, stone, and plastics. They can also be used to lift loadsfrom the horizontal to the vertical through 900 for transportation. The range has been designed to beuser friendly and the handle enables the operator to guide the load easily during operation and eachclamp is supplied fitted with large rubber pads to minimise damage.

These clamps are ideal in production facilities and especially on construction and building sites.


Very

large

pad area*

MANUALHANDLING*

HGC 250 250 0 - 10 1.4 £137 HGC 250 EX 250 0 - 10 1.5 £150 HGC 250 EB 250 0 - 10 1.4 £141


*Per clamp. • Please contact our sales team for full technical drawings.EX= Extended handle (300mm). EB=Eye bolt (instead of handle).

117



BTG CONCRETE PIPE LIFTING CLAMPS

Concrete pipe lifting clampsWorking load limit (WLL) 1500 - 3000kgs*

The BTG concrete pipe lifting clamps are sold in sets of threeand they come complete with chain slings (the working loadlimits shown are based on a set of three clamps).

They are designed for the vertical transportation of concrete pipesections with a diameter of up to 2000mm.

The jaw capacity is designed for pipe thickness of 40 - 220mm.

Attachment and removal of the clamps from the pipes is extremelyeasy due to the simple and straightforward design.

Features:

• solid construction. • Factor of safety 4 : 1 • simple and safe handling. • large jaw capacity. • for heavy duty use. • lightweight design. • service friendly. • For concrete according to DIN4034.

Workmanship and partsThese plate clamps are service-friendly, making it easy toexchange parts, which are readily available. Clamp repairs areavailable through the factory, or can be done by a competentperson.

BTG1500/3 1500 40 - 120 165 100 135 75 18 180 34 £450

BTG3000/3 3000 50 - 180 245 175 180 100 26 310 60 £680

BTG3000L/3 3000 90 - 220 245 175 180 100 26 310 78 £780

Model WLL Jaw (Z) Mouth Pressure A B C D Weight Price capacity depth (E) line (F) kgs* mm mm mm mm mm mm mm kgs** £*

*Per set of three. **Weight per set of three c/w chains.

Lifting clamps for concrete

pipe up to a diameter of 3000mm

are available upon request.*

118



PP PILE PULLING CLAMPS

CP PILE PITCHING CLAMPS

PH PIPE HOOKS

PH 2/A 2000 0 - 40 2.4 £128 £202 PH 4/A 4000 0 - 50 5.6 £186 £258 PH 6/A 6000 0 - 60 8.3 £231 £297 PH 8/A 8000 0 - 70 13.5 £324 £398 PH 10/A 10000 0 - 80 17.8 £342 £414

Model WLL Pipe wall thickness Weight Without Polyurethane (without lining**) lining coating kgs* mm kgs* £*

PH for 600 - 900 top angle between chains:

CP 2 2000 20 228 20 19 £413 CP 3 3000 26 228 30 23 £461 CP 5 5000 35 228 30 33 £511

Model WLL Jaw width Throat depth Pin dia. Weight Price kgs mm mm mm kgs £

*Per pair. **Please note capacities of polyurethane coated pipe hooks will be reduced by 5mm.

PH 2/B 2000 0 - 30 2.8 £128 £202 PH 4/B 4000 10 - 40 6.3 £186 £258 PH 6/B 6000 20 - 50 10.6 £231 £297 PH 8/B 8000 30 - 65 14.4 £324 £398 PH 10/B 10000 30 - 75 13.3 £342 £414

Model WLL Pipe wall thickness Weight Without Polyurethane (without lining**) lining coating kgs* mm kgs* £*

PH for 900 - 1200 top angle between chains:

The PH pipe hooks are used in pairs for the safe transport of pipes. The shackles are includedwith the hooks.

There are two options available: the standard hooks are supplied uncoated without a lining,but there is also the option to have polyurethane coating applied for additional protection to thepipe being lifted.

Sold inpairs completewith shackles.

The CP pile pitching clamps are specifically designed for pitching sheet steel piling. Theseclamps come fitted with a 15 metre length of rope which allows the clamp to be release fromthe ground. These units also come fitted as standard with a shackle.

NB: These clamps are NOT designed for extracting driven piles.

PP 3 3000 0 - 16 147 12 £425 PP 8 8000 0 - 30 194 28 £593 PP 12 12000 0 - 30 190 52 £792

Model WLL Jaw capcity Throat depth Weight Price kgs mm mm kgs £

The PP pile pulling clamps are designed to pull out driven piles or trench shielding. The clampshave a narrow opening and a deep slot to ensure that the pile is gripped firmly. It is extremelydifficult to determine the forces required to pull out driven piles so it is recommended that aload indicator is used to ensure the WLL of the clamp is not exceeded.

The PP clamp is supplied as standard with a double locking mechanism to ensure that the clampremains ‘locked on’ and does not become unlocked during extraction of the pile.

119



TSD ‘STANDARD’ SCREW CLAMPS

TSZ ‘TWO WAY’ SCREW CLAMPS

TSH ‘SWIVEL HOOK’ SCREW CLAMPS

TSD 1500 1500 0 - 35 5 £284 TSD 3000 3000 0 - 35 8 £383 TSD 5000 5000 0 - 40 16 £537 TSD 7500 7500 0 - 40 19.5 £613



The TSD standard screw clamps offer many possible uses. They are designed to be usedin conjunction with ratchet lever hoists to align steel structures or fabrications. They are ideally suitedfor the construction industry.

The unique design of the spindle makes it easy to attach to ‘angle’ plate. This is achieved by simplyturning the handle which applies the pressure to the plate holding it securely.

NB. The plate surface of the material to be lifted must not exceed a hardness level of HRC30/Brinell 300.

TSZ 500 500 0 - 28 3 £274 TSZ 1500 1500 0 - 35 5 £326 TSZ 3000 3000 0 - 35 9 £397 TSZ 5000 5000 0 - 40 16 £711 TSZ 7500 7500 0 - 40 21 £793



The TSZ ‘two way’ screw clamps have all the same featuresof the TSD (shown above) but have the additional benefit of asecond lifting point enabling it to pull in two different directions

NB. The plate surface of the material to be lifted must notexceed a hardness level of HRC 30/Brinell 300.

TSH 750 750 0 - 30 3.1 £271

TSH 1500 1500 0 - 32 7 £289

TSH 3000 3000 0 - 50 11 £377

TSH 5000 5000 0 - 80 27 £676



The TSH ‘swivel hook’ screw clamps offer many possible applications. It isparticularly useful for lifting, transferring and pulling sheet metal, girders and steelconstructions.

The clamps are supplied complete with an alloy safety shackle, that allows for pullingin 1800 degrees.

NB. The plate surface of the material to be lifted must not exceed a hardnesslevel of HRC 30/Brinell 300.

120



These TKG-VHS crane forks are equipped with adjustable tines, height adjustability & an automaticbalancing system. Crane forks with automatic balancing* tend to point their tines upward when beingtransported. This prevents the load from unintentionally slipping off the tines.

The shackle is movable and runs up and down on a track depending on the load. The automatic balancingengages by a pressurised gas spring once the forks are loaded. The load will always be in the centre ofgravity of the forks ensuring a safe transport.

• Comply to all current European Quality Standards. • Factor of safety 4 : 1 • Maintenence free. • Highly visable safety colour. • For transporting rings or coils, simply push fork tines together. • Easily adjustable tines for all pallet sizes. • Supplied with chain for securing the load.

*NB: The automatic balancing system requires a minimumload of 20% of the crane forks working load limit.

121

TKG-VHS ‘SELF WEIGHT’ BALANCE CRANE FORKS

TKG1.0vhs *200 - 1000 350 - 900 1100 - 1600 1000 100 x 30 1420 - 1920 140 £899 TKG2.0vhs *400 - 2000 400 - 900 1300 - 2000 1000 120 x 40 1655 - 2355 220 £1094 TKG3.0vhs *600 - 3000 450 - 900 1300 - 2000 1000 120 x 50 1720 - 2420 280 £1462 TKG5.0vhs *1000 - 5000 500 - 1000 1300 - 2000 1000 150 x 60 1710 - 2410 380 £1949

Model WLL* Adjustment Useable Length of Section of Overall Weight Price of tines (A) height (B) tines (C) tines (D) height (E) kgs mm mm mm mm mm kgs £

These TKG-VH crane forks are equipped with adjustable tines and adjustable height. The balancingsystem engages when the shackle is manually hooked into the appropriate notch.

• Comply to all current European Quality Standards. • Factor of safety 4 : 1 • Maintenence free. • Highly visable safety colour. • For transporting rings or coils, simply push fork tines together. • Easily adjustable tines for all pallet sizes. • Supplied with chain for securing the load.

TKG-VH ‘MANUAL’ BALANCE CRANE FORKS

TKG1.0vh 0 - 1000 350 - 900 1100 - 1600 1000 100 x 30 1390 - 1890 130 £748 TKG2.0vh 0 - 2000 400 - 900 1300 - 2000 1000 120 x 40 1640 - 2340 200 £928 TKG3.0vh 0 - 3000 450 - 900 1300 - 2000 1000 120 x 50 1670 - 2370 250 £1207 TKG5.0vh 0 - 5000 500 - 1000 1300 - 2000 1000 150 x 60 1700 - 2400 370 £1643

Model WLL* Adjustment Useable Length of Section of Overall Weight Price of tines (A) height (B) tines (C) tines (D) height (E) kgs mm mm mm mm mm kgs £



DC500 DRUM CLAMP

DCV500 ‘VERTICAL LIFT’ DRUM CLAMP

DA/DAF ‘LOW HEADROOM’ DRUM GRABS

DCV500 500 479 350 410 300 50 7 £149

Model WLL A B C D E Weight Price kgs mm mm mm mm mm kgs £

The DCV500 drum clamp has been designed to lift and transport steel drums inthe vertical position. One clamp can be used to lift drums with or without theirlids by gripping the rim of the drum.

Its light weight and small overall design makes it ideal for picking up drums thatsit tightly on pallets.

The centre of gravity of the drum is below the lifting point during transportation.

The DVC500 is also available with a ‘lock on / open latch’. Please contact theCamlok sales team for further details.

DC500 500 152 150 127 30 21 41 17 40 1.2 £128

Model WLL A B C D E F G H Weight Price kgs* mm mm mm mm mm mm mm mm kgs* £*

The DC500 drum clamp has beendesigned to lift and transport steeldrums. If moving empty or sealeddrums then one clamp is sufficienton its own. Should you be lifting anopen full drum, then two clampsshould be used with a two leg chainsling.

This clamp is extremely light weightand very quick and easy to use.

DA 350 420 - 700 3.5 £351

DAF 350 420 - 700 6.0 £393

Model WLL Jaw Capacity Weight Price kgs mm kgs £

The DA drum grab is designed for the vertical transportation of steel drums.The jaws grab under the lip of the drum with its form-fitting connection.

The DAF drum grab works on the same principle as the DA grab, but has theadded benefit of adjustable arms that canbe used with an overhead crane or forklift.

*Per clamp.

122



DT ‘HORIZONTAL LIFTING’ DRUM TONGS

DBV DRUM GRAB

DBT DRUM GRAB

The DBV500 drum grab has been designed for the transportationof upright barrels.

This unit grabs upright barrels and sets them down in the sameposition. The clamping jaws are fitted with a hard rubber liningto provide a friction hold. There is a form-locking feature on thedrum hoop that provides extra safety. This additional feature isindispensable if the surface of the barrels is stained with oil orgrease.

NB: These grabs are designed for use with STEEL DRUMS only.

DT 500 600 - 900 5.5 £204

Model WLL Drum length Weight Price kgs mm kgs £

The DT drum tongs have been designed for use when lifting and transporting drums in thehorizontal position.

To use these tongs you simply attach the jaws below the rolled edge on either end of thedrum and lift the handle upwards. The drum is then ready to lift. The weight of the drum onthe tong jaws prevents the jaws from opening.

To release the tongs simply place the drum on the ground and push downward on the lever.

NB: These tongs are designed for use with STEEL DRUMS only.

DBT 300 400 - 600 600 1150 1525 90 34 15 200 400 83 £1288

Model WLL Jaw Capacity A B C D E F G H Weight Price kgs O mm mm mm mm mm mm mm mm mm kgs £

The DBT drum grab with tipping devicehas been designed for the transportation,lifting, placing down, turning over andemptying of barrels.

In order to tip the drums easily, the must bepicked up at the correct centre of gravity.

NB: These grabs are designed for usewith STEEL DRUMS only.

DBV500 300 400 - 600 600 1040 950 90 34 15 200 400 400 65 £1032

Model WLL Jaw Capacity A B C D E F G H I Weight Price kgs O mm mm mm mm mm mm mm mm mm mm kgs £

123



TRU ROUND STOCK GRABS

TBG BLOCK GRABS

TRU 100 100 50 - 150 3.9 £380 £445 £537 £602 TRU 500 500 35 - 200 13.6 £425 £490 £576 £641 TRU 1000 1000 35 - 200 13.6 £512 £577 £642 £707 TRU 1500 1500 80 - 300 27.0 £580 £645 £719 £784 TRU 3000 3000 80 - 300 49.0 £1100 £1165 £1240 £1305 TRU 4000 4000 200 - 600 204.0 £1650 £1715 £1790 £1855

Manual latch Auto latch Model WLL Jaw capacity Weight Standard jaws Rubber lined Standard jaws Rubber lined kgs mm kgs £ £ £ £

TRU round stock grabsWorking load limit (WLL) 100 - 4000kgs

The TRU round stock grabs are designed to pick up tubes,pipes and rolls or similar round stock material with a diameterof up to 600mm. They are extremely easy and simple to use andmake for safe lifting.

Options: • Available with automatic open / close device. • Jaws can be fitted with plastic or rubber pads to minimise marking of surfaces.

NB: When using the protective lining, it is important that the surfaces are dry, cleanand free of oil and grease.

TBG block grabsWorking load limit (WLL) 200 - 1000kgs

The TBG block grabs are designed to transport all materialswith parallel surfaces that can withstand a clamping pressuretwice as high as the load being lifted. The range offers jawcapacities from 0 - 1100mm. They are extremely easy andsimple to use and make for safe lifting.

Options: • Available with automatic open / close device. • Jaws can be fitted with serrated teeth or rubber lined pads. Please specify at time of ordering.

NB: When using the models fitted with rubber pads, it is important that the surfacesare dry, clean and free of oil and grease.

Small jaw opening

up to 250mm.*

Large jaw

opening up

to 1100mm.

*

124

TBG 500S 500 0 - 150 27 £588 £588 £688 £688

TBG 1000S 1000 50 - 250 50 £770 £770 £870 £870

TBG 200L 200 200 - 500 49 £821 £821 £921 £921

TBG 300L 300 400 - 700 52 £934 £934 £1034 £1034

TBG 500L 500 600 - 900 55 £1038 £1038 £1138 £1138

TBG 1000L 1000 800 - 1100 72 £1666 £1666 £1766 £1766

Manual latch Auto latch Model WLL Jaw capacity Weight With teeth Rubber lined With teeth Rubber lined kgs mm kgs £ £ £ £



TSA ‘LIGHT WEIGHT’ BLOCK GRAB

TDI INSIDE COIL GRABS

TPR ‘LIGHT WEIGHT’ PROFILE STEEL GRABS

The TDI inside grabs are specifically designed for the handling ofcylindrical or rectangular objects such as coils or box section.

These grabs are available with three different jaw options dependanton your application. The jaw options available are: Profiled steel,case hardened serrated, or rubber protective lined.

For inside grabs with jaws with protective lining, the inside surfaceof the material being lifted must be free of oil and grease. Whenordering please advise the jaw lining required.

TSA 500 250/500 0 - 240 13.5 £599

Model WLL Jaw capacity Weight Price kgs mm kgs £

Block grab model TSACapacities 250/500kgs

The TSA block grab is useful for the transport ofstone and concrete blocks, such as kerb stonesaswell as other materials with parallel surfaces. Thegrab has a protective lining to ensure a safe andnon-marking transport.

The clamping jaw and the centre of gravity are easilyand quickly adjustable by means of the locking pin.

NB: It is important that the surfaces are dry, clean and free of oil and grease.

TDI 100 100 220 - 420 17 £1021 TDI 500 500 400 - 600 53 £1331 TDI 1000 1000 500 - 700 60 £1588

Model WLL Inside diameter Weight Price kgs mm kgs £

Model shown has

profiled steel jaws.*

The TPR profile steel grabs are specifically designed for thehandling and transportation of steel girders in the ‘I’ configuration.

They boast a large jaw capacity, which makes them useful forvarious beam widths.

The clamping jaws press securely with a positive fit to the girder.

TPR 500 500 0 - 200 15 £500 TPR 1500 1500 0 - 300 24 £653 TPR 3000 3000 0 - 300 47 £890

Model WLL Inside diameter Weight Price kgs mm kgs £

125

250kgs 500kg



TCK ‘SINGLE ARM’ C-HOOKS

TACH ‘TWIN-ARM’ C-HOOKS

Twin-arm, C-Hooksfor confined spaces

The Camlok TACH Twin-arm, C-Hooks are designed to lift loads in the horizontalposition and are ideal for narrow-isle handling applications.

The hooks are suspended from notches on the top beam. These allow the arms tobe adjusted to suit a variety of load widths. This hook can be engaged and releasedby a single crane operator.

All TACH C-hooks are individually designed to yourspecific requirements. Please call our engineeringdepartment with your measurements and we willdo the rest.

Single-arm, C-HooksThe Camlok TCK C-Hooks have been designed to safely and efficiently handlecoils, rolls, rings, pipes, round stock and other similar loads.

Many features are available on C-hooks. When lifting collared or standard pipes, thebackstop device can be positioned as far back as possible. If the lifting of shorterpipes is required the backstop can be adjusted accordingly. Loads that are longer,or exceed the specified working load limit, should not be lifted.

Camlok uses the latest 3D CAD Design technology to quickly produce specificproducts tailored to our customers requirements. There are many additional optionsavailable including shaped tines and adjustable end-stops.

C

B

A

Load details: The more information you can provide the quicker a quote canbe prepared. Please provide the Width (A) x Outside Dia. (B) x Inside Dia. (C)

Please provide the same

information as shown in

the diagram above on the

TCK C-hooks.*

126



TCS ‘UNIVERSAL’ TURNING HOOKS

DL5 CABLE DRUM LUG WITH LOCKING LEVER

DL 5 5000 82 x 85 11 £299

Model WLL* Hole size Weight Price* kgs mm kgs £

The DL5 cable drum lug with locking lever has been designed for thelifting, loading or transportation of steel or wooden cable reel drums.

The simple design allows the user to place the lugs either side of thedrum, attach a two legged chain sling (not supplied) and lift.

The standard capacity supplied is 5000kgs over the pair however othersizes can be manufactured upon request.

*Per pair. • Please contact our sales team for full technical drawings.

TCS 0.5 / 120 500 50 - 120 220 9 £222 TCS 0.5 / 200 500 100 - 200 300 10 £235 TCS 1.0 / 200 1000 100 - 200 300 13 £246 TCS 1.0 / 300 1000 200 - 300 400 15 £307 TCS 2.0 / 200 2000 100 - 200 300 21 £370 TCS 2.0 / 300 2000 200 - 300 400 23 £436 TCS 3.0 / 200 3000 100 - 200 300 34 £481 TCS 3.0 / 300 3000 200 - 300 400 39 £559

Model WLL* Coil Min. internal dia. Weight Price kgs mm mm kgs £

Place the hook into the coil centre as shownabove (diagram 1), with the back of the liftingshoe touching the inside of the coil and the liftingsling vertical. Slowly hoist up until the coil risesfrom the ground.

As the coil rises,traverse the craneback so that thecoil pivots on thelower rear corner(A).

Continue hoisting and traversingthe crane until the coil is vertical.Take special care when thepivot point is below the cog ofthe coil, as the coil will toppleback into the hook. If thin coilsare lifted, then place the coildown on its edge and move thecoil to the rear of the hook fortransporting.

(1) (2) (3)

A

The TCS coil turning hooks are specifically designed to pick coils of steel or bandingmaterial etc when lying flat.

Once the turning hook is positioned and the crane hook is raised, the coil automaticallytransfers from the horizontal position to the vertical position. This allows for easytransportation and also allow for loading onto machines or racking.

127

SOLD

IN

PAIRS*



Container lifting lugCLB.

CLT/CLB CONTAINER LIFTING LUGS

CLT for top liftingCLB for side liftingWorking load limit (WLL) 32000 - 56000kgs

These container lifting lugs are supplied in sets of 4 and are available inwith a total lifting capacity of up to 56 tonnes. The CLT and CLB lugs serveas flexible lashing points for the transportation of containers.

Two types are available dependant on if you want to fasten them to the topor the side of the container:

The CLT type is vertically mounted in the hole at the top of the containerand is locked into place by simply turning the lug 900. This configurationallows for transportation via the use of a lifting frame in conjunction withcables, chains or slings.

The CLB model is mounted horizontally to the side of the container at eitherthe top or the bottom fixing holes. This model has a spring loaded bolt toprevent accidental release.

NB. NOT TO BE USED ON A 4 LEG CHAIN SLING.

CLTfor top lifting

CLBfor side lifting

CLB

32000 SIDE

500 152 181 45 37 73 75 40 18

£415 40000 360

50000 Vertical

CLT 56000 TOP Vertical 123 217 45 39 57 101 121 28 £459

Model WLL Type Top angle A B C D E F G Weight Price of lifting between chains kgs mm mm mm mm mm mm mm kgs* £*

Always read

operating instructions

prior to use.*

*Per set of 4.

Container lifting lugCLT.

128



PR PAPER REEL HEAD CLAMP

The PR paper reel head clamp has been developed to lift single or, with the use of a spreader beam, severalreels simultaneously. The design allows easy access to reels in confined spaces and is particularly useful forhandling reels in open top freight boxcars, container ship holds and cargo storage facilities.

The clamp is fabricated from steel and has a polyurethane coating to ensure a safe grip and prevent damage tothe load.

PR 4250 4250 1400 - 1850 70 £1990

Model WLL Reel diameter Weight Price kgs* mm kgs* £*

*Per set. • Other sizes available. Please contact the Camlok sales team for details.

Beams available upon

request. Contact sales

for details.*

A wide variety of different paper handling equipment is available from Camlok. As with most of our equipment, products can be adaptedfrom existing designs to satisfy most customers specific requirements. Please contact the Camlok design department to find out more.

Small arm grab.

Fixed beam.Rotating beam.

Tissuehandling

grab.

OTHER PAPER HANDLING OPTIONS:

129



TTB BIG BAG LIFTERS

TZH ADJUSTABLE ‘SINGLE’ TINE HOOKS

FLTH ADJUSTABLE ‘DUAL’ TINE HOOKS

TTB 1/1090 1000 750 - 800 210 60 110 27 £426 TTB 1/1320 1000 900 - 970 210 60 110 33 £491 TTB 2/1090 2000 750 - 800 240 75 135 42 £559 TTB 2/1320 2000 900 - 970 240 75 135 52 £628

Model WLL Width (Z) B C D Weight Price kgs mm mm mm mm kgs £

The TTB big bag lifters are designed to lift and transportlarge bags safely and securely. They are manufacturedas a 4 point spreader beam in a fixed frame. Theconstruction incorporates 4 hooks with safety latchesthat allow fast loading and unloading of the bags.

TZH1.5/150 1500 100 150 310 360 260 74 120 25 8.5 £207

TZH3.0/150 3000 100 150 350 400 270 74 120 28 12.0 £235

TZH5.0/150 5000 100 150 350 400 295 74 120 34 16.0 £343

TZH5.0/200 5000 150 200 440 490 320 94 180 34 16.0 £385

TZH10.0/200 10000 150 200 440 490 420 94 180 45 43.0 £533

Model WLL A B C D E F G H Weight Price kgs mm mm mm mm mm mm mm mm kgs £

The TZH tine hook is designed to convertyour forklift truck into a crane. This is doneby simply sliding the TZH onto a single tine.The tine hook is fastened to the tine bytightening the two threaded bars on eitherside.

The unit is supplied as standard with aswivel safety hook.

FLTH 1 1000 120 x 60 25 £355 FLTH 2 2000 120 x 60 31 £402 FLTH 3 3000 120 x 60 37 £473

Model WLL Max. fork size Weight Price kgs mm kgs £

The FLTH tine hook is designed to convert your forklift truck into acrane. This is done by simply sliding the FLTH over the tines of yourforklift truck. The FLTH is fastened to the tines by tightening the twothreaded bars underneath each tine.

The unit is supplied a standard with a swivel safety hook.

130



CFA/M-C CRANE FORKS & SAFTEY CAGE

SL SHEARLEGS

CFM/C1 0 - 1000 Manual 190 £1556

CFA/C1 200 - 1000 Self balance 180 £1764

CFM/C2 0 - 2000 Manual 215 £1929

CFA/C2 400 - 2000 Self balance 205 £2129

Model WLL Balance type Weight Price kgs kgs £

The CFA/M-C crane forks have been specifically designed for lifting andmoving palletised loads of bricks, blocks and bags of building material.

The units are supplied as standard with a safety cage to ensure the load doesnot move during transportation. This is particularly useful when moving smallerloose items, such as tools, bags or wheel barrows to high levels with a crane ona construction site. The safety cage has a simple, yet effective, quick lockingmechanism.

These crane forks are available with either self weight or manual balancing.

NB: These safety cages must not be used for lifting personnel.

SL0.500/2 500 2000 2254 1800 24 £544 SL1000/2 1000 2000 2276 1816 33 £567 SL1000/3 1000 3000 3340 2544 44 £621 SL1000/4 1000 4000 4411 3270 89 £665 SL2000/3 2000 3000 3366 2554 71 £755 SL2000/4 2000 4000 4430 3282 90 £849 SL3000/3 3000 3000 3409 2730 88 £895 SL3000/4 3000 4000 4473 3458 108 £970

Model WLL Height to eye Leg length PCD ‘E’ Weight Price* kgs mm mm mm kgs £

The Camlok Shearlegs have been designed to be simple and easy to erect andoperate. Each set of shearlegs are supplied, as standard, fitted with safety chainsand a large eyebolt for the suspension of hand operated lifting mechanisms, chainblocks or pulleys.

NB: These shearlegs must not be used for lifting personnel, although HeightSafety Tripods are available on page 54.

Illustration showingoperation:

(2) Brick pallet lifted by crane fork.

(3) Empty safety cage.

(4) Crane fork loadsbrick pallet intosafety cage.

(5) Lock brick palletinto safety cage.

(1) Brick pallet.

(6) Crane fork picks up locked and loaded safety cage.

Available with a varietyof leg and foot options:

* (1) Fitted as standard for hard ground. eg concrete.

A

C

B

E

200

(2) FF. Flat footfor soft ground.eg. earth

(3) FR. Rubber lined foot forinternal use.

(4) FC. Combinedfor hard or soft ground.eg. earth or concrete.

(5) Dual heightsupplied with2 safety chains(max. split 2)

(6) Split leg forstorage andtransport(max split 2)

(7) Adjustable legs suitable for un-levelground, shallow slopes and slight inclines(max. adjustable height 500mm)

*Fitted with standard legs for hard ground. Call sales team for other options.

131



SB/MG SPREADERS, BEAMS, JIBS & GANTRIES

Spreader beams(WLL) 0 - 40000kgs

Spreader Beam

Camlok’s spreader beams are the practical and safe choicefor either long material to prevent sagging and shifting,

or for loads where the weight has to be carefullydistributed or suspended from several points.

The extensive standard programme offers awide variety of payloads, working widths,adjustable ranges and hooks for commonapplications.

The heavy duty and cost-effectivestandard types are complemented byvarious special designs made to acustomer’s specifications. These mayinclude spreader beams with hooks forplate material, or with C-hooks, crane forks, or grabs forbulky and long materials. Special designs with laterally fixedhooks are fitted with slings to pick up rolls, pipes andsimilar objects.

Also available are the so-called ‘star’ spreader beamspicking up cylindrical materials or spreader beams with sidehooks and 4-point support which share the easy operation,reliability and safety of all Camlok spreader beams.

Mobile gantries(WLL) 0 - 3000kgs

Mobile Gantries

Camlok can design mobile gantries and jibs to suit anycustomer requirements or specifications. Gantries can beinternally braced, externally braced or, for capacities up to1000kg and with a maximum span of 3mtr, they can beun-braced.

Alternatively, legs can be fitted with flat plates for fixedpositioning.

Gantries are also available with lockable castors.

Model: TTS-Ewith fixed lifting centre.

Whatever your

requirements are, Camlok

can design and engineer

a solution!

*

Model: MG2000with external bracing.

*Camlok offer “made to measure” solutions for all your spreader, beams, jibs and gantry requirements.Just call the Camlok design department with your enquiry and they will do the rest!

132



CAMLOK SPECIALS

*Camlok offer “made to measure” solutions for all your lifting requirements.Just call the Camlok design department with your enquiry and they will do the rest!

Whatever your

requirements are, Camlok

can design and engineer

a solution!

*

‘Bespoke design’Camlok has a broad and diverse line of standard products that satisfy the requirements of the majority oflifting applications. However, Camlok engineers are often asked to design clamps and grabs for unusualand specific customer applications.

We have a full team of in-house design engineers who are there to help you with any ‘oddball’ enquiriesyou may come across.

All we need, off you, is a rough outline of what your application entails and we will endeavour to producea budget price and general arrangement sketch.

Below are a few examples of some of the ‘specials’ that we have done to date:

• Concrete tunnel - section turners

This section was specially designed to lift, turn and transport cast concrete tunnel ring segments foruse on the English channel tunnel rail links.

• Remote control clamps

These clamps were designed for use in the hazardousenvironment of Nuclear Power Plant decommissioning.The clamps were used to lift and transport the sectionsfrom within the reactor to a waste holding area for safedisposal.

• Large cask grabs

This cask grab was designed to handle large stainlesssteel casks with flanged ends of a specified diameter.This particular model shown was designed for liftingcasks containing wine.

• DT2 Drop test clamps

Designed for offshore coastal defences, this clamp wasdesigned for use when reinforcing breakwaters. It wasengineered to hold a suspended load by the shackle andallow an operator to release the load in a controlledmanner.

• 3 Jaw horizontal clamps

These 3-Jaw horizontal clamps were designed originally for a largeconstruction site project who used them to lift heavy bridgesections. Used in pairs, they had a working load limit of 20 tonnes.

133



RIGHT 3FOR LIFTING LONG PLATESTWO CLAMPS AND A LIFTING BEAM MUST BE USED

RIGHT 3FOR LIFTING SHORT LENGTH PLATESA SINGLE CLAMP CAN BE USED

• Always read operating instructions before use.

• Plate must be free from grease, liquids, scale or paint.

• Always check the operation of the clamp before use.

• Never use damaged or worn clamps. Report damaged equipment to the relevant person.

RIGHT 3FOR TURNING OVER PLATESPLATE MUST BE IN CONTACT WITH BACK OF CLAMP

Loads weighing between themaximum and minimum workingload limit may be lifted andturned through 1800 in theplane of the clamp.

WRONG 7Always ensure that the plate ispositioned to the back of the clamp.

Only lift one plate at a time.

For this type of liftuse CY/CX hingedplate clamps only.

When the clamp iswrongly positionedit will reposition itselfon reaching top deadcentre and mayrelease the plate.

For long plates abeam must be used.Do not use endlesschain slings.

Always checkpositioning of clampbefore use.

Insufficient slack insling.

Operating lever onlymoves part way andplate is not released.

Do not force but tap chain lug if stuck.

Force will causefailure of camshaft.

Do not fast loweronto floor as cranehook will force openthe clamp andrelease the plate.

Do not lower if leveris not in the lockedposition.

Ensure full depth of grip withlocking lever in locked position.

If locking lever is uppermost it is necessaryto lift the clamp when sliding onto the plateto allow free movement of the jaw.

Lifting sling must bevertical for all positions.

Take extra care whenclamp takes least weightat “top dead centre”.

Always use a safetyhook or safety sling.

Check lever is in locked position.

Ensure plate enters fulldepth of the clamp.

Loads weighing abovethe minimum and up tothe maximum W.L.L. maybe lifted through 1800 in the plane of the clamp.

Wear width.

Plate clamp jaw.

Plate at full depthand lever in lockedposition.

Chipped teeth are only acceptableif the chip is less than half the widthof the tooth and the adjoining teethand undamaged.

CAMLOK SAFETY VERTICAL PLATE CLAMPS

134



HORIZONTAL PLATE CLAMPS

GIRDER / SECTION CLAMPS

SCREWLOK BEAM CLAMPS

ALWAYS READ

OPERATING

INSTRUCTIONS

BEFORE USE.

Check the plate is in contactwith the back of the clamp.

Bundles must be the samewidth and size.

Clamps with teeth canonly lift one plate at a time.

3WRONG RIGHT RIGHT Use 2 pairs of clamps and a lifting beam or spreader beam for long plates.

DO NOT USE 4 LEG SLINGS.

WRONG RIGHT Use one pair of clamps for short plates.

DO NOT USE ENDLESS CHAIN SLINGS.

RIGHT

7

7

3

3

450 Min.900 Max.

FOR LIFTING LONG PLATES

FOR LIFTING SHORT PLATES

CG TTR CB

1 2 3

Use on small sections. Jaw in contact with sufficient surface area to grip load safety.

Front of clamp in contact with load.Always ensure the clamp isfitted correctly before attempting a lift.

For long girdersuse 2 clamps anda lifting beam.

For short sectionsone clamp may beused.

3CG, TTR & TTG CLAMPS TTG

ALWAYS READ OPERATING

INSTRUCTIONS BEFORE USE.

Loads up to themaximum workingload limit (W.L.L.)and above theminimum W.L.L. areacceptable withina 150 cone fromthe centre line ofthe clamp.

RIGHT3Correct fitting:

The tips of the sideplates are touching thebeam flange. The loadis transmitted into thebeam and away fromthe edge.

3 7

WRONGIncorrect fitting:

Tips of the side plates areclear of the beam andcannot take any load. Allthe loads is taken at theflange edge.

As the load is applied theside plates will be forcedapart and theadjustmentbar is putunder tensileload.

7

CAMLOK SAFETY HORIZONTAL / GIRDER / SCREWLOK CLAMPS

135



STEERMAN LOAD MOVING SYSTEMS

Steerman is a worldwide supplier of load movingequipment with outlets throughout Europe, Africa,Asia and North America.

Designed for the professional load mover, thesesystems have been developed over a number ofyears to ensure total ease of operation and maximumsafety.

Steerman load moving skates comprise of a steerablefront section and a pair of adjustable rear trolleys.These innovative systems are available in capacitiesranging from 10 to 100 tonnes and can be strippeddown to component parts for easy transportation.

*Features & Benefits

Steerman skates in use.

1. Special Composite Wheel Equipment.

This unique material is machined from solid to produce the ideal wheel for use on modern industrial flooring. Hard enough to give incredibly low rolling resistance yet designed to protect expensive coated surfaces, unlike conventional metal wheeled skates.

2. Made from S.G. Iron rather than of Welded Construction.

This malleable material is immensely strong, is reproduced with total accuracy and is powder coated prior to assembly. Conventional steel fabricated units have to be much larger to achieve the same capacities and are therefore more cumbersome to use and transport.

3. Steerman’s Three Point Loading System.

This ensures a safe and stable configuration which eliminates the risk of one skate rolling out from below the load. This design also ensures that loads are not carried on a reduced number of wheels when travelling.

4. Unique Turntable Design.

A special cast nylon material has been developed for strength and light-weight. Large diameter thrust bearings allow these turntables to swivel effortlessly while the special composite material ensures both anti- slip properties and greater impact resistance.

Moving loads the professional way!

These Steerman Skates are an absolute

must for all Hire Companies!

136



SX/S ‘HEAVY DUTY’ NYLON WHEELED SKATES

SX10 10 Black x 16 82 x 48 180 102 252 to 1200 54 £803 £321 £563

SX15 15 Blue x 32 82 x 48 180 102 480 to 1500 76 £1083 £434 £758

SX20 20 Black x 32 82 x 48 180 102 480 to 1500 76 £1401 £561 £981

SX25 25 Blue x 48 82 x 48 180 110 720 to 1500 136 £1491 £596 £1044

SX30 30 Black x 48 82 x 48 180 110 720 to 1500 136 £1695 £664 £1161

S40 40 Blue x 48 115 x 54 350 170 800 to 2000 302 £4044 £1617 £2831

S60 60 Black x 48 115 x 54 350 170 800 to 2000 302 £4463 £1785 £3124

S80 80 Blue x 48 150 x 65 425 210 990 to 2000 525 £6117 £2447 £4282

S100 100 Black x 48 150 x 65 425 210 990 to 2000 525 £6686 £2674 £4681

Model Capacity of Colour and Size of Turntable Overall Rear Boxed weight Price for Price for Price for COMPLETE quantity wheels diameter height width COMPLETE COMPLETE REARS FRONT SYSTEM of wheels adjustment SYSTEM SYSTEM ONLY ONLY tonnes mm mm mm mm kgs £ £ £

• Full technical data sheets for each unit are available on request. Please contact the Steerman sales team for further informationor visit our web site: www.steerman.co.uk

SX10

SX15 SX20

SX25 SX30

S60 S80 S100

*This is what

a Rear Systemcomprises of.

*This is whata Front System

comprises of.

*This is what a Complete

System comprises of.

S40

137

Steerman genuine spare parts are shown on pages 190-199.*



LX ‘BUDGET’ NYLON WHEELED SKATES

SCS-20 20 50.0 £316 SCS-30 30 58.0 £401 SCS-60 60 92.0 £574

Model Capacity Weight Price tonnes kgs £

Steerman Caterpillar Skates provide an economic and robust solution tomany load moving and placement problems.

Features include: • Carrying capacity of 20, 30 or 60 tonnes. • Professional build quality. • Modular concept allows linking of units. • Robust lockable steel container with nylon castors.

Model Capacity Lift height O/A length Roller (dxw) Weight Price kgs mm mm mm kgs £

Steerman’s new roller pinch bar is an ideal companion tothe professional load mover.

Its compact and light weight design makes it simple andvery easy to use and transport. With its low toe plateheight, it is able to get into the tightest gaps.

RPB15 1500 145 2000 75 x 55 16.5 £74 RPB50 5000 145 2000 70 x 54 32.0 £124

*Steel wheels.

RPB ROLLER PINCH BARS

SCS CATERPILLAR SKATES

Capacities: 6000 and 12000kgs

This LX range of load moving systems are now available asa ‘low cost’ alternative to our premium Steerman range ofskates.

These three point loading systems comprise of a steerablefront and a pair of adjustable rear skates that are suppliedcomplete and ready to use.

The steerable front skates (LX-6F and LX-12F) are suppliedcomplete with steering handle/towing bar and the rearskates (LX-6/12R) are supplied complete with twoadjustable alignment bars.

LX-6 6 12 85 x 90 310 x 255 300 x 250 45.0 115 £259 LX-12 12 16 85 x 90 630 x 400 300 x 250 96.0 115 £395 LX-6F 3 4 85 x 90 310 x 255 - 15.0 115 £98 LX-12F 6 8 85 x 90 630 x 400 - 66.0 115 £232 LX-6/12R 6 8 85 x 90 - 300 x 250 30.0 115 £175

Model Capacity Number Wheel Load area Load area Weight Height Price of wheels diameter front skate rear skate x width tonnes mm mm mm kgs mm £

• Full technical data sheets for each unit are available on request. Please contact our sales team for further information.

Load moving skates - ‘low cost’ option

LX-6 LX-12

138



LF ‘FIXED WHEELED’ MOVING SKATES

LFL ‘STEERABLE’ MOVING SKATES

139

Load moving skates and systems with fixed wheels


The components of the load moving skates can be universally combined and are ideal fortransport of medium, heavy loads of all kinds. The components can be used individuallyor adapted into a load moving system.


• Units are maintenance-free. • Solid forged steel construction. • Anti-slip rubber lining. • Abrasion-esistant nylon wheels. • Models LF-2.5 and above are provided with two enclosed ball bearings per wheel.

Load moving skates and systems with steerable wheels

Capacity: 1000kgs

The components of the load moving skates can be universally combined and are ideal fortransport of medium, heavy loads of all kinds. The components can be used individuallyor adapted into a load moving system.


• Units are maintenance-free. • Solid forged steel construction. • Anti-slip rubber lining. • Abrasion-esistant nylon wheels. • Models LFL-1-2 uses two steerable and two fixed wheels. • Model LFL-1-4 uses four steerable wheels.

LF-1 13600006 1000 fixed 4 100 x 35 400 x 228 x 120 7.0 £43LF-2 13600007 2000 fixed 8 100 x 35 400 x 228 x 120 8.0 £63LF-2.5 13600008 2500 fixed 2 85 x 90 275 x 120 x 100 4.0 £47LF-3 13600009 3000 fixed 4 85 x 85 400 x 228 x 100 9.5 £72LF-6 13600010 6000 fixed 6 85 x 85 415 x 210 x 100 12.0 £97

Model Article Capacity Wheels Number Wheel Dimension Weight Price number of wheels dia. x width L x W x H kgs mm mm mm kgs £

Model Article Capacity Wheels Number Swivel wheel Fixed wheel Dimensions Weight Price number of wheels dia. x width dia. x width L x W x H kgs mm mm mm kgs £

LFL-1-2 13600011 1000 2 x fixed, 2 x steerable 4 75 x 46 100 x 35 430 x 340 x 120 7.0 £106 LFL-2-4 13600012 1000 4 x steerable 4 75 x 46 100 x 35 430 x 340 x 120 8.0 £160

LF-2 LF-2.5 LF-3 LF-6

LF-1

LFL-1-2

LFL-2-4

NEWPRODUCT

NEWPRODUCT



140

SFLJ FORK LIFT TRUCK JACKS

SFLJ50 5000 4300006213 520/7400 25 106/187 282 237 262 140 22.0 £956 SFLJ100 10000 4300006214 520/7400 30 105/180 345 249 263 140 30.0 £1142

Model Capacity Article Working Minimum Adjustable Dimensions Stroke Weight Price on claw no. pressure claw height claw heights (A min) (A max) (L) (B) (H) (HH) kgs bar/psi mm mm mm mm mm mm kgs £

This compact Steerman forklift truck jack, with its integrated hydraulic pump, eliminates the needfor additional hoses or pumps. Its low profile lifting toe is also perfect on all types of forklift,electric hand pallet trucks, and stackers with low ground clearance.

HTJ HYDRAULIC TOE JACKS

MHS MACHINE LIFTING JACKS

HTJ-3 4300006217 3000 3000 16 230 130 16.4 £338 HTJ-6 4300006218 6000 6000 22 267 152 23.2 £416 HTJ-10 4300006219 10000 10000 29 280 130 38.2 £555

Model Article no. Claw capacity Head capacity Toe height Closed height Stroke Weight Price kgs kgs mm mm mm kgs £

Steerman hydraulic toe jacks are ideal when working in very confined spaces. Typical uses includelifting and positioning of heavy machinery, fabricated steel structures, and general engineeringapplications. These jacks are also ideal for use with a set of Steerman skates.

Features include: • Lifting capacity of 3, 6 or 10 tonnes, on the head and the toe. • Extremely low entry height of the toe. • Operating lever rotates through 2200. • Large stable base area. • Carry handle for ease of handling. • Chrome plated ram and pump piston.

Lifting capacities 5000kgs - 25000kgs

Multi-functional lifting jacks ideal for low-height lifting or working in confined spaces. These jacks can be usedvertically or horizontally and the 25000kg model has an adjustable screw for easy handling.

The 5000kg and 10000kg models have a 3600 rotatable claw making light work of loads. Pump levers can beremoved for even better mobility.

Model Article no. Capacity Stroke Closed Closed Effort at Weight Price toe head pump lever height height on full load tonnes mm mm mm daN kgs £

MHS 50 040014771 5 205 25 368 38 25 £250

MHS 100 040014772 10 230 25 420 40 35 £380

MHS 250 040014773 25 215 58 505 40 109 £989



141

JH ‘UNIVERSAL’ BOTTLE JACKS

JH-2A 13300003 2000 181 115 50 2.7 £22 JH-4A 13300004 4000 205 126 60 3.7 £30

JH-6A 13300005 6000 219 130 75 4.7 £36 JH-8A 13300006 8000 225 152 70 5.7 £48 JH-12A 13300007 12000 240 153 80 8.0 £62 JH-20A 13300008 20000 240 153 80 11.0 £86 JH-30 13300408 30000 280 180 - 22.0 £216 JH-50/2 13300893 50000 305 178 - 53.0 £910

Model Article Capacity Closed Stroke Screw Weight Price no. height extension kgs mm mm mm kgs £

Lifting capacities 2 - 50 tonnes

The JH bottle jack is ideal for general operations such as lifting, pushing, moving, and supportingall kinds of loads. These jacks can be used in either vertical or horizontal positions.

AJH/S ALUMINIUM JACKS

Jacks with plain piston (standard type) AJS - 653 6.5 - 75 131 159 x 76 - 3.6 £423 AJS - 104 10 - 115 182 171 x 76 - 6.3 £606 AJH - 620 20 - 152 265 180 x 120 - 10.9 £769 AJH - 1220 20 - 305 440 250 x 120 - 16.7 £1013 AJH - 630 30 - 152 265 200 x 140 - 15.4 £868 AJH - 1230 30 - 305 452 275 x 140 - 23.4 £1313 AJH - 660 60 - 152 293 250 x 190 - 27.4 £1358 AJH - 1260 60 - 305 500 340 x 190 - 43.7 £1659 AJH - 6100 100 - 152 315 305 x 250 - 49.0 £2483

Jacks with lifting claw AJH - 620C 20 8 152 280 250 x 120 67 14.5 £947 AJH - 1220C 20 8 305 452 250 x 120 67 22.2 £1185 AJH - 630C 30 12 152 284 275 x 140 72 20.3 £1135 AJH - 1230C 30 12 305 472 275 x 140 72 31.0 £1514 AJH - 660C 60 24 152 327 340 x 190 72 43.1 £1614 AJH - 1260C 60 24 305 533 340 x 190 72 64.9 £2060

• Aluminium jacks with safety lock nuts (screwed rams) are also available. Please contact our sales team for further details.

Model Capacity Max. capacity Stroke Closed Base plate Min. height Weight Price of lifting claw height dimensions of lifting claw tonnes tonnes mm mm mm mm kgs £

Lifting capacities 6.5 - 100 tonnes

Aluminium jacks combine lightweight with high lifting capacity. The use of hightensile aluminium alloy allows lifting capacities of up to 100 tonnes resultingin a very favourable 1.8 tonnes lifting capacity per 1kg weight ratio.

Operation of Yale hydraulic jacks is very simple. Jacks are supplied ready foruse including hydraulic oil, operating lever, and where applicable carryinghandle and lifting claw.

Features: • Extremely low weight.

• Strokes from 75 to 305mm.

• All jacks provided with an overload protection valve.

• Hardened alloy steel saddle and sensitive lowering

valve which is activated by the operating lever.



142

EC ‘STANDARD’ FOLDING ENGINE CRANES

HWK KLS ‘HEAVY DUTY’ FOLDING ENGINE CRANES

1 1000 517 1930 620

2 900 420 1985 720

CR-1000 3 800 323 2035 820 110.0 £409 4 700 230 2090 920

5 600 127 2145 1020

Model / Boom Capacity Min. Max. Boom Weight Price art. no. position hook hook length in kit height height form kgs mm mm mm kgs £

The Steerman engine crane features welded construction with rugged reinforcedtubular steel. The special hydraulic long rams are equipped with a patentedbuilt-in by-pass mechanism. The innovative design allows it to be quickly foldedaway for very easy transportation. Ready to despatch straight from the shelf.

V-shapedchassis.

Parallelchassis.

Lifting capacities 500 - 1000kgs

These heavy duty hydraulic engine cranes are designed to solve all your workshop liftingapplications. Configurations are available in 500kg and 1000kg versions and can have aparallel or V-shaped chassis.

Features: • A hydraulic system that can rotate for use in confined spaces. • Parking brake fitted as standard to secure the crane firmly in position. • Cantilever arm can raise to 2080mm & can be extended to suit applications. • Quickly and easily folded away by one person.

Model / Chassis Lifting Capacity

article no. type A1 A2 A3 A4 C B E D G H I/J Weight Price

kg/mm kg/mm kg/mm kg/mm mm mm mm mm mm mm mm kgs £

HWK KLS 0.5 Parallel 500/1130 400/1230 350/1330 250/1430 2200 2080 770 940 1680 1820 990/850 138 £683 040008514

HWK KLS 0.5 V 500/1130 400/1230 350/1330 250/1430 2200 2080 770 940 1680 1820 990/850 132 £617 040008515

HWK KLS 1.0 Parallel 1000/1130 800/1230 700/1330 500/1430 2200 2080 770 940 1680 1820 990/850 156 £720 040008516

HWK KLS 1.0 V 1000/1130 800/1230 700/1330 500/1430 2200 2080 770 940 1680 1820 990/850 150 £663 040008517

Parallel chassis.

V-Shaped chassis.

Article n

o.43

0000

6215



143

SPARE PARTS

C/D PUL-LIFTS € 750, 1500, 3000, and 6000kgs.

AL RATCHET LEVER HOISTS € 750, 1500, and 3000kgs.

HANDY RATCHET LEVER HOISTS € 250 and 500kgs.

PT RATCHET LEVER HOISTS € 800, 1600, 3200, and 6300kgs.

UNO RATCHET LEVER HOISTS (OLD MODEL) € 750, 1500, 3000, and 6000kgs.

UNOplus RATCHET LEVER HOISTS € 750, 1500, 3000, and 6000kgs.

YALETRAC CABLE PULLERS € 800, 1600, and 3200kgs.

YALELIFT HAND CHAIN HOISTS € 500, 1000, 2000, 3000, 5000, and 10000kgs.

YALELIFT HAND CHAIN HOISTS (MK III) € 500, 1000, 2000, 3000, 5000, and 10000kgs.

VS HAND CHAIN HOISTS (ORIGINAL - MK I) € 500, 1000, 2000, and 3000kgs.

VSplus HAND CHAIN HOISTS (OLD MODEL - MK II) € 500, 1000, 2000, 3000, and 5000kgs.

TPM MAGNET SPARES € 100, 300, 500, 800, and 1000kgs.

CPV/F ELECTRIC CHAIN HOISTS € 250, 500, 1000, and 2000kgs.

CM LODESTAR ELECTRIC CHAIN HOISTS € 250, 500, 1000, 2000, and 3000kgs.

CPS ELECTRIC CHAIN HOISTS € 125 and 250kgs.

STEERMAN LOAD MOVING SKATES € 5, 10, 15, 20, 25, 30, 40, 60, 80, and 100 tonnes.

92 SERIES VERTICAL PLATE LIFTING CLAMPS € 500, 1500, 2000 and 3000kgs.

CZ VERTICAL PLATE LIFTING CLAMPS € 1000, 2000, 3000, 4000 and 6000kgs.

CY ‘HINGED’ VERTICAL PLATE LIFTING CLAMPS € 1000, 2000 and 3000kgs.

CX ‘HINGED’ VERTICAL PLATE LIFTING CLAMPS € 1500, 3000 and 6000kgs.

SILVERLINE PALLET TRUCK € 2500kgs.

SILVERLINE HAND CHAIN HOISTS € 500, 1000, 2000, 3000kgs.

SILVERLINE RATCHET LEVER HOISTS € 750, 1500, 3000, 6000kgs.

LB WIRE ROPE WINCH € 650kgs.

LOAD AND HAND CHAINS € All models.

144 - 147

148 - 149

150 - 151

152 - 155

156 - 159

160 - 163

164 - 169

170 - 177

178 - 185

186 - 189

190 - 196

197

198 - 201

202 - 205

206 - 207

208 - 217

218

219

220

221

222 - 223

224

226 - 227

228

229

*

NEW MODEL



C/D85 750KG PUL-LIFTS

Parts for rubber grip levercomplete = No.68

Parts for model C85with roller chain only.

Common partsfor both models.

Item Article no. Description Qty. Price £

Common parts for both models

1-5 00106207 Housing assy. 1 £117.87 2 00102503 Bushing 1 £1.00 3 00104986 Washer 1 £0.37 4 09176014 Lub fitting 1 £3.81 5 00105020 Brake pawl spring pin 1 £1.37 6 00111108 Brake pawl bolt 1 £11.14 7 09115147 Hex. nut 1 £1.68 8 00108342 Brake pawl 1 £35.16 9 00105019 Brake pawl spring 1 £0.50 10 00111106 Fitting piece 1 £7.43 11 09134018 Locking sleeve 1 £1.00 12 00107487 Name plate 1 £1.61 13 09128008 Grooved nail 4 £0.75 14 00106254 Bolt 1 £0.75 16 09130022 Retaining ring 1 £1.12 17 00103895 Disc hub 1 £13.48 18 00105075 Ratchet disc 1 £50.64 19 00108500 Friction disc 2 £8.42 20 00101028 Ratchet 1 £61.78 21 00111029 Load brake cover 1 £7.55 22 09104116 Screw 4 £0.37 23 09134050 Locking sleeve 2 £1.12 24-30 00105969 Hand lever assy. 1 £125.79 24 00105939 Hand lever, 443mm 1 £75.15 25 00102136 Lever rod pin 1 £0.50 26 00102135 Pawl rod lever 1 £10.90 27 00102131 Ratchet rod 1 £10.90 28 00102132 Lever pawl spring 1 £0.75 29 00102134 Ratchet rod pin 1 £0.50 30 00102133 Ratchet pawl 1 £16.84 31 00102037 Hand wheel 1 £13.50 32 00102038 Check washer 1 £2.64 33 09123018 Tooth washer 1 £0.75 34 09115059 Hex. nut 1 £0.50 35-38 00108807 Hook assy. 2 £26.50 36-38 00109789 Safety latch kit 2 £4.83 41 00108241 Swivel tube 1 £7.43 61 00108251 Brake pawl spring 1 £1.74 62 00107660 Lever head 1 £84.07 63 00107666 Ratchet rod 1 £4.09 64 00107730 Tube 1 £12.88 65 09134094 Locking sleeve 1 £0.60 66 00108351 Plug 1 £1.56 67 00246418 Grip 1 £3.54 68 00108787 Rubber grip lever, complete 1 £134.95

Parts for model C85 35-38, 41+48 00100283 Bottom block assy. 1 £63.89 50 00105698 Sprocket wheel 1 £165.78 51 09121205 Washer 1 £0.87 52 00105916 Stripper 1 £14.36 53 00100276 Swivel half 2 £8.05 54-55 00106232 Chain stop assy. 1 £4.70 54 00105913 Chain stop 1 £1.49 55/57 00108448 Chain bolt 1 £3.47 56 00105589 Chain washer 2 £2.35 59 01244800 Load chain (per metre) 1 £21.00 60 00109474 Chain lock 1 £2.96

Parts for model D85 35-38 +41-43 00100305 Bottom block assy. 1 £65.00 39 00103144 Load sheave 1 £105.24 40 00105942 Stripper 1 £15.48 43 00104979 Swivel half 2 £8.42 44-47 00104639 Chain stop assy. 1 £11.51 44 00104630 Chain stop half 2 £5.70 45 09102169 Cyl. screw 1 £0.37 46 09122031 Lockwasher 1 £0.74 47 09115002 Hex. nut 1 £0.13 48 01607633 Load chain, (per metre) 1 £11.00

33

3

3

3

33

3

3

3 = Recommended spares.

NB: CMCO have a minimum order value of £30 net.

NB: All prices shown are per individual part.

144



145







1-2+5-6 00106208 Housing assy. 1 £229.91 2 00105930 Bushing 1 £2.28 5 00105020 Brake pawl spring pin 1 £1.37 6 09105005 Cyl. screw 2 £1.37 7 00108287 Brake pawl 1 £34.54 8 00105019 Brake pawl spring 1 £0.50 9 00103205 Fitting piece 1 £5.70 10-13 00106209 Housing cover assy. 1 £117.87 11 00102503 Bushing 1 £1.00 12 00105930 Bushing 1 £2.28 13 09105010 Cyl. screw 2 £1.25 14 00107487 Name plate 1 £1.61 15 09128008 Grooved nail 4 £0.75 16 00103146 Drive pinion 1 £160.87 17 00111017 Spacer 1 £7.55 18 00106254 Bolt 1 £0.75 20 00103806 Gear 1 £104.87 21 09134028 Locking sleeve 2 £0.50 22 09134003 Locking sleeve 2 £0.50 23 00103895 Disc hub 1 £13.48 24 00108500 Friction disc 2 £8.42 25 00105075 Ratchet disc 1 £50.64 26 00101028 Ratchet 1 £61.78 27 00106001 Load brake cover 1 £10.57 28 09104116 Screw 5 £0.37 29-35 00105969 Hand lever assy. 1 £125.79 29 00105939 Hand lever, 443mm 1 £75.13 30 00102135 Pawl rod lever 1 £10.90 31 00102136 Lever rod pin 1 £0.50 32 00102131 Ratchet rod 1 £10.90 33 00102132 Lever pawl spring 1 £0.75 34 00102134 Ratchet rod pin 1 £0.50 35 00102133 Ratchet pawl 1 £16.84 36 00102037 Hand wheel 1 £13.50 37 00102038 Check washer 1 £2.64 38 09123018 Tooth washer 1 £0.75 39 09115059 Hex. nut 1 £0.50 40-43 00108247 Hook assy. 2 £49.77 41-43 00109081 Safety latch kit 2 £5.20 46 00106048 Swivel tube 1 £11.14 65 * 00108251 Brake pawl spring 1 £1.74 66 00107660 Lever head 1 £84.07 67 00107666 Ratchet rod 1 £4.09 68 00107730 Tube 1 £12.88 69 09134094 Locking sleeve 1 £0.60 70 00108351 Plug 1 £1.56 71 00246418 Grip 1 £3.55 72 00108787 Rubber grip lever, complete 1 £134.95 Parts for model C85 40-43, 46+57 00100365 Bottom block assy. 1 £99.67 55 00105900 Sprocket wheel 1 £92.72 56 00105917 Stripper 1 £19.69 57 00100382 Swivel half 2 £11.51 58-59 00106233 Chain stop assy. 1 £7.18 58 00105914 Chain stop 1 £2.48 59 00105986 Chain bolt 1 £4.83 60 00105588 Chain washer 2 £1.49 61 00105986 Chain bolt 1 £4.83 63 01245700 Load chain (per metre) 1 £30.00 64 00106079 Chain lock 1 £5.45 Parts for model D85 40-43 +46-48 00100311 Bottom block assy. 1 £101.03 44 00103805 Load sheave 1 £76.39 45 00105697 Stripper 1 £21.05 48 00100173 Swivel half 2 £12.63 49-52 00104640 Chain stop assy. 1 £13.37 49 00104631 Chain stop half 2 £7.68 50 09102103 Cyl. Screw 1 £0.37 51 09122032 Lock washer 1 £1.12 52 09115014 Hex. nut 1 £1.12 53 01607645 Load Chain (per metre) 1 £16.00

33

3

3

3

33

3












1-2, 5-6 00106219 Housing assy. 1 £233.75 2 00105929 Bushing 1 £1.86 5 00105020 Brake pawl spring 1 £1.37 6 09105006 Cyl. screw 2 £0.87 7 00108289 Brake pawl 1 £45.81 8 00105019 Brake pawl spring 1 £0.50 9 00104951 Fitting piece 1 £4.33 10 00106220 Housing cover assy. 1 £119.23 11 00106248 Bushing 1 £6.19 12 00105929 Bushing 1 £1.86 13 09105011 Cyl. Screw 2 £1.25 14 00107487 Name plate 1 £1.61 16 09128008 Grooved nail 4 £0.75 17 00106096 Drive pinion 1 £165.41 18 00105989 Spacer 1 £3.47 19 00106254 Bolt 1 £0.75 21 00103808 Gear 1 £113.16 22 09134001 Locking sleeve 2 £1.12 23 09134097 Locking sleeve 2 £0.50 24 00103895 Disc hub 1 £13.48 25 00108500 Friction disc 2 £8.42 26 00105075 Ratchet disc 1 £50.64 27 00101028 Ratchet 1 £61.78 28 00106002 Load brake cover 1 £11.51 29 09104116 Screw 5 £0.37 30-36 00106221 Hand lever assy. 1 £133.34 30 00105940 Hand lever, 570mm 1 £82.09 31 00102135 Pawl rod lever 1 £10.90 32 00102136 Lever rod pin 1 £0.50 33 00102131 Ratchet rod 1 £10.90 34 00102132 Lever pawl spring 1 £0.75 35 00102134 Ratchet rod pin 1 £0.50 36 00102133 Ratchet pawl 1 £16.84 37 00102037 Hand wheel 1 £13.50 38 00102038 Check washer 1 £2.64 39 09123018 Tooth washer 1 £0.75 40 09115059 Hex. nut 1 £0.50 41-44 00109960 Hook assy. 2 £76.39 42-44 00408671 Safety latch kit 2 £9.16 68 00108251 Brake pawl spring 1 £1.74 69 00107660 Lever head 1 £84.07 70 00107666 Ratchet rod 1 £4.09 71 00107731 Tube 1 £21.18 72 09134094 Locking sleeve 1 £0.60 73 00108351 Plug 1 £1.56 74 00246418 Grip 1 £3.55 75 00108788 Rubber grip lever complete 1 £142.13 Parts for model C85 41-44+58,59,67 00106224 Bottom block assy. 1 £140.77 56 00105903 Sprocket wheel 1 £181.01 57 00105920 Stripper 1 £32.69 58+67 00106223 Swivel tube with screw 1 £21.79 59 00105573 Swivel half 2 £23.65 60-61 00106234 Chain stop assy. 1 £8.42 60 00105915 Chain stop 1 £3.84 61 00105567 Chain bolt 1 £5.76 62 00105582 Chain washer 2 £1.49 63 00105567 Chain bolt 1 £5.76 65 01245701 Load load (per metre) 1 £55.00 66 00106235 Chain lock 1 £9.53 67 09106343 Screw 2 £0.61 Parts for model D85 41-44 +47+48 00109100 Bottom block assy. 1 £133.96 45 00103807 Load sheave 1 £105.24 46 00105695 Stripper 1 £38.63 47 00108132 Swivel tube 1 £16.34 48 00108134 Swivel half 2 £16.10 50-53 00158013 Chain stop assy. 1 £15.48 50 00157987 Chain stop half 2 £8.42 51 09102092 Cyl. screw 1 £0.50 52 09122032 Lock washer 1 £1.12 53 09115014 Hex. nut 1 £1.12 54 01607652 Load chain (per metre) 1 £23.00

3

33

3

3

333

3




146









1-2, 5-6 00106225 Housing assy. 1 £236.97 2 00105929 Bushing 1 £1.86 5 00105020 Brake pawl spring pin 1 £1.37 6 09105006 Cyl. screw 2 £0.87 7 00108289 Brake pawl 1 £45.81 8 00105019 Brake pawl spring 1 £0.50 9 00103207 Fitting piece 1 £8.9110-13,+15 00104954 Housing cover assy. 1 £97.34 11 00106248 Bushing 1 £6.19 12 00105929 Bushing 1 £1.86 13 09105011 Cyl. Screw 2 £1.25 14 00107487 Name plate 1 £1.61 15 00105599 Capacity plate 1 £2.84 16 09128008 Grooved nail 6 £0.75 17 00106096 Drive pinion 1 £165.41 18 00105989 Spacer 1 £3.47 19 00106254 Bolt 1 £0.75 21 00103808 Gear 1 £113.16 22 09134001 Locking sleeve 2 £1.12 23 09134097 Locking sleeve 2 £0.50 24 00103895 Disc hub 1 £13.48 25 00108500 Friction disc 2 £8.42 26 00105075 Ratchet disc 1 £50.64 27 00101028 Ratchet 1 £61.78 28 00106002 Load brake cover 1 £11.51 29 09104116 Screw 5 £0.37 30-36 00106221 Hand lever assy. 1 £133.34 30 00105940 Hand lever, 570mm 1 £82.09 31 00102135 Pawl rod lever 1 £10.90 32 00102136 Lever rod pin 1 £0.50 33 00102131 Ratchet rod 1 £10.90 34 00102132 Lever pawl spring 1 £0.75 35 00102134 Ratchet rod pin 1 £0.50 36 00102133 Ratchet pawl 1 £16.84 37 00102091 Crank handwheel assy. 1 £37.27 38 00102038 Check washer 1 £2.64 39 09123018 Tooth washer 1 £0.75 40 09115059 Hex. nut 1 £0.50 41-44 00100004 Hook assy 2 £90.04 42-44 00100019 Safety latch kit 2 £7.43 45 00105964 Chain bolt 1 £13.00 46 09134110 Locking sleeve 1 £0.25 49 00105945 Swivel half 2 £76.39 50 00103131 Idler sheave shaft 1 £27.11 51 09134055 Locking sleeve 1 £0.25 52 09102010 Cyl. Screw 2 £0.87 53 09102029 Cyl. Screw 1 £1.12 54 09118020 Slotted nut 3 £0.75 55 09122032 Locking washer 3 £1.12 74 00108251 Brake pawl spring 1 £1.74 75 00107660 Lever head 1 £84.07 76 00107666 Ratchet rod 1 £4.09 77 00107731 Tube 1 £20.18 78 09134094 Locking sleeve 1 £0.60 79 00108351 Plug 1 £1.56 80 00246418 Grip 1 £3.55 81 00108788 Rubber grip lever complete 1 £142.13 Parts for model C85 41-44+49-55,65 00106227 Bottom block assy. 1 £499.82 63 00105903 Sprocket wheel 1 £181.01 64 00105920 Stripper 1 £32.69 65 00105919 Idler sprocket 1 £128.29 66-67 00106234 Chain stop assy. 1 £8.42 66 00105915 Chain stop 1 £3.84 67 00105567 Chain bolt 1 £5.76 68 00105928 Chain anchor 1 £74.78 69 09134046 Locking sleeve 1 £0.25 70 00105931 Chain bolt 1 £4.09 72 01245701 Load chain (per metre) 1 £55.00 73 00106235 Chain lock 1 £9.53 Parts for model D85 41-44+ 49-56 00106247 Bottom block assy. 1 £382.04 47 00103807 Load sheave 1 £102.60 48 00105695 Stripper 1 £37.68 56 00118244 Idler sheave 1 £78.47 57-60 00158013 Chain stop assy. 1 £15.05 57 00157987 Chain stop half 2 £8.21 58 09102092 Cyl. screw 1 £0.49 59 09122032 Lock washer 1 £1.12 60 09115014 Hex. nut 1 £1.12 61 01607652 Load chain (per metre) 1 £23.00

33

3

3

3

33

3

3




147



148

AL 750 - 3000KG RATCHET LEVER HOISTS

750 & 1000kg Capacity 1500kg Capacity 3000kg Capacity


1 09125042 Cotter pin 1 £1.09 2 00205701 Castle nut 1 £2.48 3 00205702 Check washer 1 £5.51 4 00205703 Hand wheel 1 £21.52 5 00205704 Hand lever 1 £134.04 5-9+11 00207510 Hand lever assy. 1 £152.72 6 00205705 Plug 1 £1.12 7 00205706 Selector switch 1 £11.14 8 09134071 Roll pin 1 £0.37 9 00205707 Ratchet pawl 1 £14.98 11 00205708 Ratchet pawl spring 1 £3.22 12 00205709 Brake cover 1 £64.26 13 09102064 Screw 4 £4.11 14 09122018 Lockwasher 4 £1.65 15 09134116 Roll pin 2 £3.27 16 00205711 Retaining ring 1 £11.14 17 00205712 Ratchet 1 £46.06 18 00205713 Spring 1 £4.33 19 00205714 Friction disc 2 £7.68 20 00205715 Ratchet disc 1 £35.04 21 00205726 Retaining ring 1 £2.35 22 00205716 Disc hub 1 £23.65 23 00209411 Ratchet pawl 1 £19.19 24 00209261 Ratchet pawl spring 1 £0.54 25 00209413 Kick spring 1 £2.48 26 * Ratchet pawl stud 1 - 27 00209405 Housing 1 £136.81 28 00205809 Spring guide 1 £2.35 29 00205806 Needle bearing 1 £24.51 31 00205806 Needle bearing 1 £24.51 33 00205721 Suspension bolt 1 £3.8434+35 00209417 Top hook assy. (750kg) 1 £49.7034+35 00209418 Top hook assy. (1000kg) 1 £60.53 35 00209415 Safety latch kit 2 £5.70 36 00205725 Spacer 1 £2.85 37 00205724 Driving pinion 1 £74.04 38 00207472 Spacer 1 £1.74 40 00207473 Spacer 2 £2.35 43 00205723 Gear 1 £59.30 44 00209410 Load sheave 1 £61.41 45 00205727 Gear cover (750kg) 1 £59.30 45 00207477 Gear cover (1000kg) 1 £65.62 46 00205808 Needle bearing 1 £22.41 48 00205806 Needle bearing 1 £24.51 49 09102064 Screw 4 £4.11 50 09122018 Lockwasher 4 £1.65 51 09134116 Roll pin 2 £3.27 52 00205728 Stripper 1 £9.2153+54 00205750 Screw with lockwasher 1 £5.2455+35 00209421 Load hook assy. (750kg) 1 £35.4155+35 00209422 Load hook assy. (1000kg) 1 £46.58 56 00205733 Chain bolt with nut 1 £6.07 57 00206329 Chain stop assy. 1 £12.63 58 09102064 Screw 1 £4.11 59 02107637 Load chain (per mtr) 1 £13.00


1 09125042 Cotter pin 1 £1.09 2 00205701 Castle nut 1 £2.48 3 00205702 Check washer 1 £5.51 4 00205763 Hand wheel 1 £40.58 5 00205764 Hand lever 1 £146.71

5-9+11 00207511 Hand lever assy. 1 £242.79 7 00206333 Selector switch assy. 1 £55.36 8 * Roll pin 1 - 9 00205765 Ratchet pawl 1 £34.79 10 00205768 Spring guide bolt 1 £5.32 11 00205769 Ratchet pawl spring 1 £3.22 12 00205770 Brake cover 1 £92.16 13 09102064 Screw 4 £4.11 14 09122018 Lockwasher 4 £1.65 15 09134116 Roll pin 2 £3.27 16 00205711 Retaining ring 1 £11.14 17 00205772 Ratchet 1 £61.41 18 00205713 Spring 1 £4.33 19 00205774 Friction disc 2 £8.79 20 00205775 Ratchet disc 1 £41.72 21 00205726 Retaining ring 1 £2.35 22 00205776 Disc hub 1 £29.84 23 00209412 Ratchet pawl 1 £20.06 24 00209621 Ratchet pawl spring 1 £1.73 25 00209414 Kick spring 1 £2.48 26 00209409 Ratchet pawl stud 1 £8.79 27 00209407 Housing 1 £351.37 28 00205782 Spring guide 1 £2.35 29 00205803 Needle bearing 3 £27.36 30 00205803 Needle bearing 1 £27.36 31 00205805 Needle bearing 1 £44.82 32 00205738 Bearing cover 1 £0.75 33 00205794 Suspension bolt 1 £12.5034+35 00209420 Top hook assy. 1 £97.31 35 00209416 Safety latch kit 2 £8.05 36 00205725 Spacer 1 £2.85 37 00205785 Driving pinion 1 £108.70 38 00207474 Spacer 1 £2.35 39 00207473 Spacer 2 £2.35 40 00207476 Spacer 2 £2.85 41 00205786 Gear 1 £74.04 42 00205787 Pinion 1 £82.24 43 00205784 Gear 1 £167.64 44 00200005 Load sheave 1 £115.27 45 00205790 Gear cover 1 £132.31 46 00205802 Needle bearing 1 £42.10 48 00205804 Needle bearing 1 £44.82 49 09102142 Screw 4 £5.15 50 09122013 Lockwasher 4 £0.68 51 09134054 Roll pin 2 £3.27 52 00205791 Stripper 1 £17.5153+54 00205792 Screw & lockwasher 1 £5.3755+35 00209424 Load hook assy. 1 £97.31 56 00205797 Chain bolt with nut 1 £17.67 57 00206331 Chain stop assy. 1 £22.77 58 09102064 Screw 1 £4.11 59 02107649 Load chain (per mtr) 1 £19.00

3

3

3

333

333

3

3

3

33

33





1 09125042 Cotter pin 1 £1.09 2 00205701 Castle nut 1 £2.48 3 00205702 Check washer 1 £5.51 4 00205703 Hand wheel 1 £21.52 5 00205704 Hand lever 1 £134.04 5-9+11 00207510 Hand lever assy. 1 £152.72 6 00205705 Plug 1 £1.12 7 00205706 Selector switch assy. 1 £11.14 8 09134071 Roll pin 1 £0.37 9 00205707 Ratchet pawl 1 £14.98 10 * Spring guide bolt 1 -

11 00205708 Ratchet pawl spring 1 £3.22 12 00205710 Brake cover 1 £76.76 13 09102064 Screw 4 £4.11 14 09122018 Lockwasher 4 £1.65 15 09134116 Roll pin 2 £3.27

16 00205711 Retaining ring 1 £11.14 17 00205712 Ratchet 1 £46.06 18 00205713 Spring 1 £4.33 19 00205714 Friction disc 2 £7.68 20 00205715 Ratchet disc 1 £35.04 21 00205726 Retaining ring 1 £2.35 22 00205716 Disc hub 1 £23.65 23 00209411 Ratchet pawl 1 £19.19 24 00209621 Ratchet pawl spring 1 £1.73 25 00209413 Kick spring 1 £2.48 26 00209408 Ratchet pawl stud 1 £2.85 27 00209406 Housing 1 £200.45 28 00205810 Pawl spring pin 1 £2.35 29 00205806 Needle bearing 1 £24.51 30 00205802 Needle bearing 1 £42.10 31 00205807 Needle bearing 1 £42.10 32 00205738 Bearing cover 1 £0.75 33 00205740 Suspension bolt 1 £5.3234+35 00209419 Top hook assy. 1 £68.84 35 00209416 Safety latch kit 2 £8.05 36 00205725 Spacer 1 £2.85 37 00205744 Driving pinion 1 £83.94 38 00207472 Spacer 1 £1.74 39 00207474 Spacer 2 £2.35 40 00207475 Spacer 2 £2.85 41 00205745 Gear 1 £38.63 42 00205746 Pinion 1 £55.49 43 00205743 Gear 1 £86.42 44 * Load sheave 1 - 45 00205748 Gear cover 1 £80.63 46 00205808 Needle bearing 1 £22.41 47 00205802 Needle bearing 1 £42.10 48 00205807 Needle bearing 1 £42.10 49 09102054 Screw 4 £5.15 50 09122016 Lockwasher 4 £0.59 51 09134116 Roll pin 1 £3.27 52 00205749 Chain stripper 1 £8.8553+54 00205750 Screw & lockwasher 1 £5.2455+35 00209423 Load hook assy. 1 £84.02 56 00205753 Chain bolt with nut 1 £8.37 57 00206330 Chain stop assy. 1 £16.92 58 09102064 Screw 1 £4.11 59 02107639 Load chain (per mtr) 1 £14.00

3

3

3

33

33



149

AL 750 - 3000KG RATCHET LEVER HOISTS

750 & 1000kg Capacity




150

HANDY 250KG RATCHET LEVER HOIST


1 00230161 Liftwheel 1 £29.71 2 00230138 Ratchet 1 £39.50 3 00230258 Sideplate assy. 2 £9.27 4 00230153 Grip 1 £6.19 5 00230124 Housing cover 1 £4.83 6 00230113 Disc hub 1 £35.78 7 00210001 Friction disc 2 £6.07 8 00230114 Ratchet disc 1 £17.09 9 00230130 Spring 1 £9.41 10 00230117 Check washer 1 £3.96 11 00230155 Hand wheel 1 £12.13 12 00230120 Spacer pin 1 £1.49 13 00230119 Spacer pin 2 £1.36 14 00230121 Spacer tube 1 £1.49 15 00230115 Guide roller 2 £2.85 16 00230116 Stripper 1 £3.84 17 00230169 Housing cover assy. 1 £29.71 18 00230259 Brake pawl assy. 1 £10.52 19 00230131 Suspension bolt 1 £8.67 20 00230152 Top hook assy. 1 £36.41 21 00230137 Bottom block assy. 1 £36.41 22 00230164 Hand lever assy . 1 £12.50 23 00230260 Chain end stop assy. 1 £9.66 24 00230261 Chain bolt assy. 1 £3.10 25 00230262 Hex. nut and washer 1 £1.52 26 00230288 Hex. nut 1 £8.52 27 00230168 Safety latch kit 2 £8.30 28 02100004 Load chain (per metre) 1 £9.00

250kg Capacity

3

3

3

3

3






151

HANDY 500KG RATCHET LEVER HOIST

500kg Capacity


1 00230329 Liftwheel 1 P.O.A. 2 00230138 Ratchet 1 £39.50 3 00230328 Sideplate assy. 2 £9.09 4 00230153 Grip 1 £6.19 5 00230332 Housing cover 1 £8.73 6 00230113 Disc hub 1 £35.78 7 00210001 Friction disc 2 £6.07 8 00230114 Ratchet disc 1 £17.09 9 00230130 Spring 1 £9.41 10 00230117 Check washer 1 £3.96 11 00230155 Hand wheel 1 £12.13 12 00230330 Drive pinion 1 £40.22 13 00230331 Spacer pin 2 £1.14 14 00230335 Guide roller 1 £4.58 15 00230340 Stripper 1 £4.70 16 00230347 Housing cover assy. 1 £10.90 17 00230259 Brake pawl assy. 1 £10.52 18 00230348 Washer and retaining ring 1 £9.60 19 00230336 Suspension bolt 1 £7.95 20 00230350 Gear assy. 1 £16.84 21 00230351 Hook assy. 1 £36.41 22 00230342 Bottom block assy. 1 £36.41 23 00230164 Hand lever assy. 1 £12.50 24 00230260 Chain end stop assy. 1 £9.66 25 00230352 Chain bolt assy. 1 £9.32 26 00230262 Hex. nut and washer 1 £1.52 27 00230288 Hex. nut 6 £8.52 28 00400449 Safety latch kit 2 £8.30 29 02100004 Load chain (per metre) 1 £9.00

3

33

3

3






152

PT 800 & 1600KG RATCHET LEVER HOISTS


1 00220148 Drive pinion 1 £31.94 2 00229207 Gear assy. 1 £46.92 3 00229210 Gear 1 £57.70 4 00220154 Load sheave 1 £21.17 5 02109357 Load chain (per metre) 1 £11.00 6 00220157 Brake pawl 1 £3.34 7 00220159 Disc hub 1 £19.44 8 00220161 Ratchet disc 1 £17.21 9 00220163 Chain guide 1 £6.69 10 00220166 Stripper 1 £2.23 11 00229216 Chain stop assy. 1 £8.17 12 00220169 Side plate, gear side 1 £18.32 13 00220172 Side plate, hand lever side 1 £22.16 14 00220175 Ratchet 1 £20.68 15 00220177 Hand lever 1 £50.39 16 00229247 Spring guide pin 1 £3.34 17 00229249 Spring guide 1 £3.34 18 00220179 Ratchet 1 £8.05 19 00220181 Gear cover 1 £17.21 20 00220184 Housing cover, hand lever side 1 £22.66

21 00220187 Hand wheel 1 £19.69 22 00220190 Top hook assy. 1 £22.41 23 00220194 Suspension bolt 1 £4.46 24 00220197 Load hook assy. 1 £22.66 25 --- --- 26 --- --- 27 --- --- 28 --- --- 29 00220204 Washer 1 £1.12 30 00220206 Safety latch kit 1 £3.84

31 00229276 Lever pawl spring 1 £3.71 32 09123046 Retaining ring 1 £1.24 33 00220209 Brake pawl spring 1 £3.59 34 00220212 Friction disc 1 £8.67 35 00220214 Free chaining spring 1 £1.74 36 00229288 Safety nut 1 £0.62 37 00229289 Safety nut 1 £0.62 38 00220235 Screw 1 £0.62 39 00220218 Identification plate 1 £5.32 40 09121001 Washer 1 £0.46 41 09115098 Hex nut 1 £1.84 42 00229291 Chain bolt 1 £2.48 43 00220237 Screw 1 £0.75 44 --- --- 45 --- --- 46 --- --- 47 00220222 Slip clutch assy. 1 £171.23 48 00220226 Hub 1 £41.97 49 00220228 Ratchet 1 £36.77 50 00220230 Disc hub 1 £38.10 51 00220231 Nut 1 £2.85 52 00220232 Cup spring 1 £8.05 53 00220233 Roller 1 £1.99 54 00220234 Friction disc (slipping clutch) 1 £20.43


1 00220149 Drive pinion 1 £42.22 2 00229208 Gear assy. 1 £89.89 3 00220152 Gear 1 £42.07 4 00220155 Load sheave 1 £30.95 5 02107639 Load chain (per metre) 1 £14.00 6 00220158 Brake pawl 1 £4.46 7 00220160 Disc hub 1 £25.63 8 00220162 Ratchet disc 1 £17.21 9 00220164 Chain guide 1 £7.30 10 00220167 Stripper 1 £3.22 11 00229217 Chain stop assy. 1 £14.36 12 00220170 Side plate, gear side 1 £24.14 13 00220173 Side plate, hand lever side 1 £28.10 14 00220176 Ratchet 1 £23.15 15 00220178 Hand lever 1 £61.04 16 00229248 Spring guide pin 1 £3.71 17 00229250 Spring guide 1 £4.95 18 00220180 Ratchet 1 £8.91 19 00220182 Gear cover 1 £25.26 20 00220185 Housing cover, hand lever side 1 £34.79 21 00220187 Hand wheel 1 £19.69 22 00220191 Top hook assy. 1 £33.18 23 00220195 Suspension bolt 1 £5.32 24 00220198 Load hook assy 1 £33.68 25 --- --- 26 --- --- 27 --- --- 28 --- --- 29 00220204 Washer 1 £1.12 30 00220207 Safety latch kit 1 £4.95 31 00229277 Lever pawl spring 1 £4.09 32 09123037 Retaining ring 1 £0.62 33 00220210 Brake pawl spring 1 £4.09 34 00220213 Friction disc 1 £12.38 35 00220215 Free chaining spring 1 £1.74 36 00229288 Safety nut 1 £0.62 37 00229288 Safety nut 1 £0.62 38 00220236 Screw 1 £0.62 39 00220219 Identification plate 1 £5.32 40 09121001 Washer 1 £0.46 41 09115098 Hex nut 1 £1.84 42 00229292 Chain bolt 1 £2.97 43 00220237 Screw 1 £0.75 44 --- --- 45 --- --- 46 --- --- 47 00220223 Slip clutch assy. 1 £185.71 48 00220227 Hub 1 £61.53 49 00220229 Ratchet 1 £43.21 50 00220230 Disc hub 1 £38.10 51 00220231 Nut 1 £2.85 52 00220232 Cup spring 1 £78.05 53 00220233 Roller 1 £1.99 54 00220234 Friction disc (slipping clutch) 1 £20.43

800kg Capacity 1600kg Capacity

3

3

3

3

3

3

3

3

3

3

3

3

3

3






153

PT 800, 1600 & 3200KG RATCHET LEVER HOISTS

800, 1600 & 3200kg Capacity

Unit with slipping clutch. *



154

PT 3200 & 6300KG RATCHET LEVER HOISTS


1 00220150 Drive pinion 1 £53.24 2 00220151 Gear assy. 1 £31.57 3 00220153 Gear 1 £47.42 4 00220156 Load sheave 1 £86.54 5 02109358 Load chain (per metre) 1 £19.00 6 00220158 Brake pawl 1 £4.46 7 00220160 Disc hub 1 £25.63 8 00220162 Ratchet disc 1 £17.21 9 00220165 Chain guide 1 £10.52 10 00220168 Stripper 1 £3.47 11 00229218 Chain stop assy. 1 £39.50 12 00220171 Side plate, gear side 1 £27.86 13 00220174 Side plate, hand lever side 1 £39.25 14 00220176 Ratchet 1 £23.15 15 00220178 Hand lever 1 £61.04 16 00229248 Spring guide pin 1 £3.71 17 00229250 Spring guide 1 £4.95 18 00220180 Ratchet 1 £8.91 19 00220183 Gear cover 1 £35.78 20 00220186 Housing cover, hand lever side 1 £38.75 21 00220187 Hand wheel 1 £19.69 22 00220192 Top hook assy. 1 £67.60 23 00220196 Suspension bolt 1 £5.20 24 00220199 Load hook assy. 1 £68.10 25 --- --- 26 --- --- 27 --- --- 28 --- --- 29 00220205 Washer 1 £0.87 30 00220207 Safety latch kit 1 £4.95 31 00229277 Lever pawl spring 1 £4.09 32 09123037 Retaining ring 1 £0.62 33 00220211 Brake pawl spring 1 £4.46 34 00220213 Friction disc 1 £12.38 35 00220216 Free chaining spring 1 £2.48 36 00229234 Safety nut 1 £0.87 37 00229288 Safety nut 1 £0.62 38 00220236 Screw 1 £0.62 39 00220220 Identification plate 1 £5.32 40 09121001 Washer 1 £0.46 41 09115098 Hex nut 1 £1.84 42 00229293 Chain bolt 1 £7.18 43 00220237 Screw 1 £0.75 44 --- --- 45 --- --- 46 --- --- 47 00220224 Slip clutch assy. 1 £207.13 48 00220227 Hub 1 £61.53 49 00220229 Ratchet 1 £43.21 50 00220230 Disc hub 1 £38.10 51 00220231 Nut 1 £2.85 52 00220232 Cup spring 1 £8.05 53 00220233 Roller 1 £1.99 54 00220234 Friction disc (slipping clutch) 1 £20.43


1 00220150 Drive pinion 1 £53.24 2 00220151 Gear assy. 1 £31.57 3 00220153 Gear 1 £47.42 4 00220156 Load sheave 1 £86.54 5 02109358 Load chain (per metre) 1 £19.00 6 00220158 Brake pawl 1 £4.46 7 00220160 Disc hub 1 £25.63 8 00220162 Ratchet disc 1 £17.21 9 00220165 Chain guide 1 £10.52 10 00220168 Stripper 1 £3.47 11 00229218 Chain stop assy. 1 £39.50 12 00220171 Side plate, gear side 1 £27.86 13 00220174 Side plate, hand lever side 1 £39.25 14 00220176 Ratchet 1 £23.15 15 00220178 Hand lever 1 £61.04 16 00229248 Spring guide pin 1 £3.71 17 00229250 Spring guide 1 £4.95 18 00220180 Ratchet 1 £8.91 19 00220183 Gear cover 1 £35.78 20 00220186 Housing cover, hand lever side 1 £38.75 21 00220187 Hand wheel 1 £19.69 22 00220193 Top hook assy 1 £131.73 23 00220196 Suspension bolt 1 £5.20 24 00220200 Load hook assy. 1 £282.04 25 00220201 Swivel half 1 £102.76 26 00220202 Idler sheave 1 £47.05 27 00220203 Idler sheave bolt 1 £31.20 28 00229270 Washer 1 £36.65 29 00220205 Washer 1 £0.87 30 00220208 Safety latch kit 1 £7.30 31 00229277 Lever pawl spring 1 £4.09 32 09123037 Retaining ring 1 £0.62 33 00220211 Brake pawl spring 1 £4.46 34 00220213 Friction disc 1 £12.38 35 00220216 Free chaining spring 1 £2.48 36 00229234 Safety nut 1 £0.87 37 00229288 Safety nut 1 £0.62 38 00220236 Screw 1 £0.62 39 00220221 Identification plate 1 £5.32 40 09121001 Washer 1 £0.46 41 09115098 Hex nut 1 £1.84 42 00229293 Chain bolt 1 £7.18 43 00220237 Screw 1 £0.75 44 09102022 Screw 1 £0.49 45 09115123 Safety nut 1 £0.20 46 00220217 Bolt 1 £0.37 47 00220225 Slip clutch assy. 1 £207.13 48 00220227 Hub 1 £61.53 49 00220229 Ratchet 1 £43.21 50 00220230 Disc hub 1 £38.10 51 00220231 Nut 1 £2.85 52 00220232 Cup spring 1 £8.05 53 00220233 Roller 1 £1.99 54 00220234 Friction disc (slipping clutch) 1 £20.43


3

3

3

3

3

3

3

3

3

3

3

3

3

3






155

PT 6300KG RATCHET LEVER HOIST

6300kg Capacity

Unit with slipping clutch. *



156

UNO 750 & 1500KG RATCHET LEVER HOISTS


1 00230001 Gear cover assy. 1 £22.16 2 00230005 Gear assy. 2 £44.20 3 00230008 Driving pinion 1 £31.57 4 00230011 Gear 1 £24.64 5 00230014 Sideplate, gear side 1 £12.63 6 00230017 Load sheave 1 £41.10 7 00230020 Chain guide 1 £8.79 8 00230023 Roller set 2 £5.57 9-10 00230028 Chain stripper assy. 1 £4.83 11 00230031 Sideplate, lever side 1 £12.63 12 00230034 Brake pawl spring 2 £0.75 13 00230036 Brake pawl 2 £8.79 14 09129031 Snap ring 2 £0.25 15 00230038 Disc hub 1 £15.97 16 00230041 Free chaining spring 1 £5.57 17 00230043 Friction disc 2 £7.43 18 00230045 Ratchet disc 1 £12.63 19 00230048 Ratchet hub 1 £15.97 20 00230051 Housing cover assy. 1 £27.49 21 00230054 Ratchet 1 £22.90 22 00230057 Hand lever assy. 1 £24.64 23 00230060 Ratchet pawl 1 £8.05 24 00230062 Spring guide pin 1 £3.34 25 00230064 Lever pawl spring 1 £0.75 26 00230066 Bushing 1 £2.48 27 00230068 Hand wheel 1 £19.44 28 04307635 Load chain (per metre) - £11.00 29 00230070 Chain end stop 1 £9.04 30 00230073 Name plate 1 £3.34 31+47 00230076 Top hook assy. 1 £30.70 32 0230079 Hook suspension bolt 1 £3.47 33+47 0230082 Load hook assy 1 £33.30 34 0230085 Chain bolt 1 £4.83 35 9115098 Hex. nut 8 £1.84 36 9115002 Nut 2 £0.13 37 9122003 Lock washer 4 £0.75 38 9101160 Screw 2 £0.75 39 0230100 Castle nut 1 £1.86 40 9125043 Cotter pin 1 £0.74 41 9115135 Hex. nut *** £1.12 42 9107007 Flat head screw 3 £0.75 43 9122002 Lock washer 3 £0.75 44 9128001 Grooved nail 6 £0.25 45 9129013 Snap ring 1 £0.87 46 9139022 Snap ring 1 £0.50 47 0230088 Safety latch kit 1 £7.18 48 9102225 Screw 1 -


1 00230002 Gear cover assy. 1 £34.05 2 00230006 Gear assy. 2 £81.10 3 00230009 Driving pinion 1 £41.97 4 00230012 Gear 1 £31.57 5 00230015 Sideplate, gear side 1 £21.42

6 00230018 Load sheave 1 £67.23 7 00230021 Chain guide 1 £12.63 8 00230023 Roller set 2 £5.57 9-10 00230029 Chain stripper assy. 1 £8.79 11 00230032 Sideplate, lever side 1 £21.42 12 00230035 Brake pawl spring 2 £0.75 13 00230037 Brake pawl 2 £18.08 14 09129055 Snap ring 2 £0.75 15 00230039 Disc hub 1 £21.42 16 00230042 Free chaining spring 1 £9.53 17 00230044 Friction disc 2 £11.14 18 00230046 Ratchet disc 1 £19.19 19 00230049 Ratchet hub 1 £21.42 20 00230052 Housing cover assy. 1 £41.97 21 00230056 Ratchet 1 £41.97 22 00230058 Hand lever assy. 1 £34.05 23 00230061 Ratchet pawl 1 £12.63 24 00230063 Spring guide pin 1 £5.57 25 00230065 Lever pawl spring 1 £1.74 26 00230067 Bushing 1 £3.84

27 00230069 Hand wheel 1 £22.90 28 04307642 Load chain (per metre) - £14.00 29 00230071 Chain end stop 1 £17.33 30 00230074 Name plate 1 £4.83 31+47 00230077 Top hook assy. 1 £46.43 32 00230080 Hook suspension bolt 1 £5.57 33+47 00230083 Load hook assy. 1 £47.49 34 00230086 Chain bolt 1 £6.44 35 09115036 Hex. nut 8 £1.77 36 09115014 Nut 2 £1.12 37 09122004 Lock washer 4 £0.30 38 09101415 Screw 2 £0.25 39 00230100 Castle nut 1 £1.86 40 09125043 Cotter pin 1 £0.74 41 09115098 Hex. nut *** £1.84 42 09107007 Flat head screw 3 £0.75 43 09122002 Lock washer 3 £0.75 44 09128001 Grooved nail 6 £0.25 45 09129043 Snap ring 1 £0.87 46 09139022 Snap ring 1 £0.50 47 00230089 Safety latch kit 1 £12.48 48 09102071 Screw 1 £3.48


3

3

3

3

3

3

3

3

3

3

3

3






157

UNO 750, 1500 & 3000KG RATCHET LEVER HOISTS

750, 1500 & 3000kg Capacity



158

UNO 3000 & 6000KG RATCHET LEVER HOISTS


1 00230003 Gear cover assy. 1 £60.79 2 00230007 Gear assy. 2 £93.97 3 00230010 Driving pinion 1 £52.12 4 00230013 Gear 1 £47.42 5 00230016 Sideplate, gear side 1 £31.57 6 00230019 Load sheave 1 £137.30 7 00230022 Chain guide 1 £26.74 8 00230024 Roller set 1 £8.79 9-10 00230030 Chain stripper assy. 1 £12.63 11 00230033 Sideplate, lever side 1 £31.57 12 00230035 Brake pawl spring 2 £0.75 13 00230037 Brake pawl 2 £18.08 14 09129055 Snap ring 2 £0.75 15 00230040 Disc hub 1 £26.12 16 00230091 Free chaining spring 1 £11.76 17 00230092 Friction disc 2 £14.24 18 00230047 Ratchet disc 1 £21.42 19 00230050 Ratchet hub 1 £31.57 20 00230053 Housing cover assy. 1 £44.20 21 00230056 Ratchet 1 £41.97 22 00230059 Hand lever assy. 1 £52.81 23 00230061 Ratchet pawl 1 £12.63 24 00230063 Spring guide pin 1 £5.57 25 00230065 Lever pawl spring 1 £1.74 26 00230067 Bushing 1 £3.84 27 00230069 Hand wheel 1 £22.90 28 04307647 Load chain (per metre) 1 £20.00 29 00230072 Chain end stop 1 £21.42 30 00230075 Name plate 1 £5.57 31+47 00230078 Top hook assy. 1 £93.97 32 00230081 Hook suspension bolt 1 £11.41 33+47 00230084 Load hook assy. 1 £95.70 34 00230087 Chain bolt 1 £11.14 35 09115115 Hex. nut 8 £0.25 36 09115014 Nut 2 £1.92 37 09122004 Lock washer 4 £0.30 38 09101415 Screw 2 £0.25 39 00230100 Castle nut 1 £1.86 40 09125043 Cotter pin 1 £0.75 41 09115036 Hex. nut *** £1.77 42 09107007 Flat head screw 3 £0.75 43 09122002 Lock washer 3 £0.75 44 09128001 Grooved nail 6 £0.25 45 09129009 Snap ring 1 £1.12 46 09139022 Snap ring 1 £0.50 47 00230090 Safety latch kit 1 £11.79 48 09102058 Screw 1 £4.09


1 00230003 Gear cover assy. 1 £60.79 2 00230007 Gear assy 2 £93.97 3 00230010 Driving pinion 1 £52.12 4 00230013 Gear 1 £47.42 5 00230016 Sideplate, gear side 1 £31.57 6 00230019 Load sheave 1 £137.30 7 00230022 Chain guide 1 £26.74 8 00230024 Roller set 1 £8.79 9-10 00230030 Chain stripper assy. 1 £12.63 11 00230033 Sideplate, lever side 1 £31.57 12 00230035 Brake pawl spring 2 £0.75 13 00230037 Brake pawl 2 £18.08 14 09129055 Snap ring 2 £0.75 15 00230040 Disc hub 1 £26.12 16 00230091 Free chaining spring 1 £11.76 17 00230092 Friction disc 2 £14.24 18 00230047 Ratchet disc 1 £21.42 19 00230050 Ratchet hub 1 £31.57 20 00230053 Housing cover assy. 1 £44.20 21 00230056 Ratchet 1 £41.97 22 00230106 Hand lever assy. 1 £54.97 23 00230061 Ratchet pawl 1 £12.63 24 00230063 Spring guide pin 1 £5.57 25 00230065 Lever pawl spring 1 £1.74 26 00230067 Bushing 1 £3.84 27 00230069 Hand wheel 1 £22.90 28 04307647 Load chain (per metre) 1 £20.00 29 00230072 Chain end stop 1 £21.42 30 00230004 Name plate 1 £6.36 31+47 00230094 Top hook assy. 1 £102.39 32 00230095 Hook suspension bolt 1 £5.94 33+47 00230094 Load hook assy. 1 £102.39 34 00230097 Chain bolt 1 £11.39 35 09115115 Hex. nut 8 £0.25 36 09115014 Nut 2 £1.92 37 09122004 Lock washer 4 £0.30 38 09101415 Screw 2 £0.25 39 00230100 Castle nut 1 £1.86 40 09125043 Cotter pin 1 £0.75 41 09115036 Hex. nut 1 £1.77 42 09107007 Flat head screw 3 £0.75 43 09122002 Lock washer 3 £0.75 44 09128001 Grooved nail 6 £0.25 45 09129009 Snap ring 1 £1.12 46 09139022 Snap ring 1 £0.50 47 00230096 Safety latch kit 1 £14.00 48 09102058 Screw 1 £4.09 49 09101050 Screw 1 £0.50 50 00230099 Crosshead swivel half, right 1 £27.36 51 00230101 Crosshead swivel half, left 1 £27.36 52-58 00230107 Bottom block 1 £83.08 52 00230103 Swivel half 1 £72.80 53 00230104 Idler sheave 1 £37.27 54 00230105 Idler sheave shaft 1 £19.14 55 09101052 Screw 1 £1.11 56 09115036 Nut 1 £1.77 57 09101010 Screw 1 £0.62 58 09115098 Nut 1 £1.84 59 00230108 Crosshead assy. 1 £63.64 60 00230102 Bottom block assy. 1 £172.47


3

3

3

3

3

3

3

3

3

3

33

3

3






159

UNO 6000KG RATCHET LEVER HOISTS

6000kg Capacity






160

UNOplus 750 & 1500KG RATCHET LEVER HOISTS


1 00230176 Sideplate (gear side) 1 P.O.A.

2 00230177 Sideplate (lever side) 1 P.O.A.

3 00230178 Brake pawl set 2 £7.20

4 00230179 Chain stripper 1 £3.90

5 00230180 Gear, assy. 2 P.O.A.

6 00230181 Free chaining spring 1 £4.80

7 00230182 Driving pinion 1 £27.00

8 00230277 Gear cover 1 P.O.A.

9 09115098 Nut kit 1 P.O.A.

10 00230185 Chain guide roller 2 £7.10

11 00230186 Disc hub 1 £13.70

12 00230187 Friction disc 2 £6.00

13 00230188 Ratchet disc 1 £10.20

14 00230275 Housing cover, assy. 1 P.O.A.

15 00230190 Fastening-parts kit (L) 1 P.O.A.

16 00230276 Hand lever, assy. 1 P.O.A.

17 00230363 Hand wheel 1 P.O.A.

18 00230193 Check washer 1 £2.40

19 00230194 Castle nut set 1 £1.60

20 00230195 Ratchet pawl set 1 P.O.A.

21 00230196 Rubber grip 1 £12.80

22 00230197 Load sheave 1 P.O.A.

23 00230198 Gear set 1 P.O.A.

24 00230199 Roller set 1 P.O.A.

25+29 00230200 Top hook assy. 1 £24.80

26 00230201 Hook suspension bolt 1 £4.00

27+29 00230202 Bottom block, assy. 1 £24.80

28 00230203 Chain bolt, assy. 1 £2.90

29 00230204 Safety latch kit 2 £6.10

30 00230205 Chain end stop, assy. 1 £9.20

31 00230358 Name plate 1 £2.90

32 04307635 Load chain (per metre) ** £11.00

33 00230208 Ratchet 1 P.O.A.




3 00230211 Brake pawl set 2 P.O.A.

4 00230212 Chain stripper 1 £7.10

5 00230213 Gear, assy. 2 P.O.A.


7 00230215 Driving pinion 1 £35.90


9 09115036 Nut kit 1 P.O.A.


11 00230219 Disc hub 1 £18.30

12 00230220 Friction disc 2 £9.45

13 00230221 Ratchet disc 1 £15.50


15 00230223 Fastening-parts kit (L) 1 £1.20


17 00230363 Hand wheel 1 P.O.A.

18 00230193 Check washer 1 £2.40

19 00230194 Castle nut set 1 £1.60

20 00230228 Ratchet pawl set 1 £10.20

21 00230229 Rubber grip 1 £14.20


23 00230231 Set Gear set 1 £27.70

24 00230232 Roller set 1 P.O.A.

25+29 00230233 Top hook assy. 1 £39.80

26 00230234 Hook suspension bolt 1 £4.10


28 00230236 Chain bolt, assy. 1 £4.40

29 00230237 Safety latch kit 2 £7.70


31 00230359 Name plate 1 £4.10


33 00230241 Ratchet 1 P.O.A.


3

3

3

3

3

3

3

3

3

3

3

3

3

3






161

UNOplus 750, 1500 & 3000KG RATCHET LEVER HOISTS

750, 1500 & 3000kg Capacity



162

UNOplus 3000 & 6000KG RATCHET LEVER HOISTS




3 00230244 Brake pawl set 2 P.O.A.

4 00230245 Chain stripper 1 £10.20

5 00230246 Gear, assy. 2 P.O.A.


7 00230248 Drive pinion 1 £44.60


9 09115115 Nut kit 1 P.O.A.


11 00230252 Disc hub 1 £22.40

12 00230253 Friction disc 2 £11.50

13 00230254 Ratchet disc 1 £17.30


15 00230256 Fastening-parts kit 1 P.O.A.


17 00230363 Hand wheel 1 £14.80

18 00230193 Check washer 1 £2.40

19 00230194 Castle nut set 1 £1.60

20 00230228 Ratchet pawl set 1 P.O.A.

21 00230229 Rubber grip 1 P.O.A.


23 00230264 Gear set 1 P.O.A.

24 00230265 Roller set 1 P.O.A.

25+29 00230266 Top hook assy. 1 £75.90

26 00230267 Hook suspension bolt 1 P.O.A.


28 00230269 Chain bolt, assy. 1 £4.80

29 00230270 Safety latch kit 2 £8.30


31 00230360 Name plate 1 £4.80


33 00230274 Ratchet 1 P.O.A.


1 00230242 Sideplate (gear side) 1 P.O.A. 2 00230243 Sideplate (lever side) 1 P.O.A. 3 00230244 Brake pawl set 2 P.O.A. 4 00230245 Chain stripper 1 £10.20 5 00230246 Gear, assy. 2 P.O.A.

6 00230247 Free chaining spring 1 £10.10 7 00230248 Drive pinion 1 £44.60 8 00230285 Gear cover 1 P.O.A. 9 09115115 Nut kit 1 P.O.A. 10 00230251 Chain guide roller 2 £21.60

11 00230252 Disc hub 1 £22.40 12 00230253 Friction disc 2 £11.50 13 00230254 Ratchet disc 1 £17.30 14 00230283 Housing cover, assy. 1 P.O.A. 15 00230256 Fastening-parts kit 1 P.O.A.

16 00230284 Hand lever, assy. 1 P.O.A. 17 00230363 Hand wheel 1 £14.80 18 00230193 Check washer 1 £2.40 19 00230194 Castle nut set 1 £1.60 20 00230228 Ratchet pawl set 1 P.O.A.

21 00230229 Rubber grip 1 P.O.A. 22 00230263 Load sheave 1 P.O.A. 23 00230264 Gear set 1 P.O.A. 24 00230265 Roller set * P.O.A. 25+29 00230266 Top hook assy. 1 £75.90

26 00230364 Hook suspension bolt 1 P.O.A. 27 00230365 Bottom block, assy. 1 P.O.A. 28

29 00230270 Safety latch kit 1 £8.30 30 00230271 Chain end stop, assy. 1 £21.00

31 00230361 Name plate 1 P.O.A. 32 04307647 Load chain (per metre) 1 £20.00 33 00230274 Ratchet 1 P.O.A. 34 09101704 Screw 1 P.O.A. 35 09115115 Hex. nut 1 P.O.A.

36 09101705 Screw 3 P.O.A. 37 00230366 Crosshead swivel half R 1 P.O.A. 38 00230367 Crosshead swivel half L 1 P.O.A. 39 09115098 Hex. nut 2 P.O.A. 40 00230368 Crosshead, assy. 1 P.O.A.

41 00230369 Swivel half 2 P.O.A. 42 09101052 Screw 2 P.O.A. 43 09101010 Screw 2 P.O.A. 44 09115036 Hex. nut 5 P.O.A. 45 00230370 Idler sheave 1 P.O.A.


3

3

3

3

3

3

3

33

33

3






6000kg Capacity

163

UNOplus 6000KG RATCHET LEVER HOISTS



164

Yaletrac®

800KG, Y08 ‘HEAVY DUTY’ CABLE PULLER

800kg Capacity (Y08)


1-3 00240019 RH body assembly 1 £134.46

2 09104072 Counter sunk screw 1 £0.25

3 00246385 Washer 1 £0.87

4 00240020 LH body assembly 1 £134.46

5 00240021 Name plate 1 P.O.A.

6 09128007 Rivet 4 £0.74

7 00240022 Anchor pin with safety chain 1 £19.81

8 00240024 Shearing pin 5 £0.75

9 00240025 Operating lever assembly 1 £27.73

10 09122018 Retaining ring 6 £0.46

11 09102066 Cylinder head screw 6 £0.73

12 09116005 Square nut 6 £0.84

13 00240042 Spring cotter assembly 1 £4.33

14 00240100 Rope entry guide 1 £2.40

15 00240031 Clamp opening lever 1 £28.85

16 00240038 Left push lever 1 £8.42

17 00240037 Right push lever 1 £8.42

18 00240036 Reverse lever 1 £8.79

19 00240040 Shaft 1 £3.10

20 09123052 Lock washer 4 £0.69

21 00240035 Shaft 1 £3.10

22 00240039 Shaft 2 £2.97

23 00240030 Pressure pin 10 £6.19

24 00240023 Forward lever assembly 1 £28.23

25 00240024 Shear pin 1 £0.75

26 00240032 Shaft 2 £8.42

27 00240026 Front cradle assembly 1 £88.17

28 00240033 Spring guide 2 £13.50

29 00240034 Spring 2 £4.70

30 00240029 Lower clamp grip 2 £56.33

31 00240028 Upper clamp grip 1 £56.33

32 00240027 Rear cradle assembly 1 £66.11





165

Yaletrac®






166

Yaletrac®




1-3 00240045 RH body assembly 1 £134.46

2 09104072 Counter sunk screw 1 £0.25

3 00246385 Washer 1 £0.87

4 00240047 LH body assembly 1 £134.46

5 00240046 Name plate 1 £5.68

6 09128007 Rivet 4 £0.74

7 00240051 Anchor pin with safety chain 1 £19.81

8 00240050 Shearing pin 5 £0.75

9 00240053 Operating lever assembly 1 £71.19

10 09122018 Retaining ring 6 £0.46

11 09102175 Cylinder head screw 6 £0.73

12 09116005 Square nut 6 £0.84

13 00240042 Spring cotter assembly 1 £4.33

14 00240059 Rope entry guide 1 £7.40

15 00240058 Clamp opening lever 1 £28.85

16 00240071 Left push lever 1 £8.42

17 00240070 Right push lever 1 £8.42

18 00240057 Reverse lever 1 £8.79

19 00240072 Shaft 1 £3.10

20 09123073 Lock washer 4 P.O.A.

21 00240074 Shaft 1 £3.10

22 00240063 Shaft 2 £2.97

23 00240064 Pressure pin 10 £6.19

24 00240052 Forward lever assembly 1 £28.23

25 00240050 Shear pin 1 £0.75

26 00240060 Shaft 2 £8.42

27 00240054 Front cradle assembly 1 £88.17

28 00240061 Spring 2 £13.50

29 00240069 Lower clamp grip 2 £4.70

30 00240068 Upper clamp grip 2 £3.55

31 00240056 Rear cradle assembly 1 £56.33

32 00240049 Hand grip assembly 1 £66.11

33 00246418 Rubber hand grip 1 £56.33

34 00240048 Cap 1 £66.11

35 00240065 Lever for clamp (short) 1 £56.33

36 00240066 Lever for clamp (long) 1 £66.11

37 00240067 Circlip

38 00240062 Bearing bolt 1 £66.11





167

Yaletrac®




168

Yaletrac®




1-3 00240101 RH body assembly 1 £238.70 2 09104072 Counter sunk screw 1 £0.31 3 00246385 Washer 1 £0.87 4 00240102 LH body assembly 1 £203.54 5 - Name plate 1 P.O.A.

6 09128007 Rivet 4 £0.78 7 00240103 Anchor pin with safety chain 1 £45.56 8 00240050 Shear pin 5 £0.62 9 00240053 Operating lever assembly 1 £71.19 10 09122016 Retaining ring 7 £0.59

11 09102214 Cylinder head screw 6 P.O.A. 12 09116001 Square nut 7 £1.24 13 00240106 Spring cotter assembly 1 £4.46 14 00240107 Rope entry guide 1 £3.84 15 00240108 Clamp opening lever 1 £44.82

16 00240109 Left push lever 1 £5.70 17 00240110 Right push lever 1 £5.70 18 00240111 Reverse lever 1 £15.48 19 00240112 Shaft 1 £0.99 20 09123046 Lock washer 2 £1.24

21 00240113 Shaft 1 £0.37 22 00240114 Shaft 2 £0.74 23 00240115 Pressure pin 8 £0.62 24 00240116 Forward lever assembly 1 £33.43 25 00240104 Shear pin 1 £0.62

26 00240117 Shaft 2 £1.98 27 00240118 Front cradle assembly 1 £15.97 28 00240119 Spring 2 £6.69 29 00240120 Lower clamp grip 2 £16.10 30 00240121 Upper clamp grip 2 £15.85

31 00240122 Rear cradle assembly 1 £29.96 32 00240123 Hand grip assembly 1 £29.96 33 00240124 Rubber hand grip 1 £2.48 34 00240125 Cap 2 £1.24 35 00240126 Lever for clamp (short) 4 £11.02

36 00240127 Lever for clamp (long) 4 £12.01 37 09123038 Lock washer 8 £0.12 38 00240128 Bearing pin 4 £1.24 39 00240129 Lever pin 2 £1.49 40 00240130 Spacer 1 £1.73

41 00240131 Pivot pin 1 £10.40 42 00240132 Pinion body 1 £16.71 43 00240133 Forward lever cam plates 2 £2.85 44 09102110 Cap head screw 1 £2.02 45 09123037 Lock washer 2 £0.62





169

Yaletrac®




170

Yalelift 360®SETTING OF THE BRAKE (MK II)

6. Attach the hand chain wheel and turn it slowly in a counter clockwise direction (green arrow), until noticeable contact has been made between the hand chain wheel pockets and the brake disc lugs. Keep the hand chain wheel in this position.

ATTENTION: If you release the hand chain wheel from this position, adjusting the brake correctly is not possible. Revert back to position one of these instructions and start again.

The patented design of the Yalelift 360 brake mechanism differs considerably from the standard Weston Screw Brake. In order to set the brakecorrectly, please follow the step by step instructions.

Adjustment of the Yalelift 360 brake.

1. Position the check washer on the drive pinion and turn counter clockwise (green arrow). At the same time turn the brake disc clockwise (red arrow) by hand, until the brake is closed. Now remove the checkwasher.

3. The spring leg is now correctly located into the cap on the bushing.

4. Push the bushing with the spring onto the drive pinion with the end lug of the spring (green arrow) positioned at an angle of approx. 900 to the slot of the brake disc (red arrow).

2. Now, assemble the spring onto the bushing, by placing the spring leg into the gap (green arrow) on the bushing flange.

5. With a screwdriver turn the end lug of the spring counter clockwise (green arrow), until it drops into the slot (red arrow) of the brake disc.

ATTENTION: Ensure that the spring does not become trapped between the bushing and the brake disc.

7. Position the check washer on the drive pinion, so that an angle of approx. 100 - 150

is achieved between the edge of the check washer and the stopper cast into the hand chain wheel (red arrow).

8. Replace the nyloc locking nut and tighten with a 13mm ring spanner.

ATTENTION: Block the check washer temporarily with a bolt to make sure the brake can not jam.

After completion carry out a function test, a light load test, and a safe working load test to ensure both the brakes reaction and integrity under load.

• Please call our technical department on 01244 375375 for further information.

DRIVE PINIONDRIVE PINION

CHECK WASHERCHECK WASHERBRAKE DISCBRAKE DISC

BUSHINGBUSHING

SPRINGSPRING

BUSHINGBUSHING

HAND CHAINHAND CHAIN

WHEELWHEEL

CHECK WASHERCHECK WASHER

BOLT

101000 - 15- 1500



171

Yalelift 360 ®MK I & MK II , BRAKE UPGRADE

IMPORTANT NOTICE!

The exploded diagram below identifies those components which differ from the original Yalelift MKI design and the Yalelift MKII design. Items 1 - 10 are items that require changing to upgrade a MKII design to the Yalelift MKII design. The original parts are marked as “(OD)” on thefollowing spare parts pages. All other parts remain unchanged.

Please ensure that the brake is set in accordance with the instructions on the opposite page.Failure to observe these instructions can result in damage to the equipment or personal injury.

YALELIFT 360 BRAKE DESIGN - 500, 1000, 2000, and 3000kgs

Item Description Qty. 500kgs 1000kgs 2000kgs 3000kgs

Article no. Price £ Article no. Price £ Article no. Price £ Article no. Price £

1 Brake assy. 1 00400885 £55.22 00400886 £70.32 00400887 £99.67 00400888 £102.17

2 Drive Pinion 1 00400774 £15.30 00400743 £21.77 00400751 £23.15 00400761 £24.14

3 Friction disc assy. 1 00400848 £12.13 00400848 £12.13 00400849 £57.82 00400849 £56.34

4 Spigot bolts 3 00400881 £4.95 00400882 £4.95 00400883 £5.82 00400884 £8.17

5 Spring 1 00400746 £0.75 00400746 £0.75 00400767 £3.10 00400767 £3.10

6 Bushing 1 00400745 £3.47 00400745 £3.47 00400765 £8.05 00400765 £8.05

7 Brake disc 1 00400742 £9.78 00400742 £9.78 00400764 £18.70 00400764 £18.70

8 Disc hub 1 00400744 £14.24 00400744 £14.24 00400762 £14.98 00400762 £14.98

9 Side plate HS assy. 1 00400336 £4.31 00400261 £5.49 00400299 £12.50 00400455 £15.55

10 Split ring 1 09129024 £2.48 09129024 £2.48 09129024 £2.48 09129024 £2.48





172


1 00400416 Gear cover assy. 1 £22.79

2 00400419 Side plate assy. 1 £25.01

3 00400347 Spacer bolt 4 £4.33

4 00400355 End cover 2 £17.09

5 00400328 Chain guide 1 £15.23

6 00400327 Stripper 1 £3.96

7 00400422 Chain stop 1 £4.83

8 00400334 Load sheave 1 £75.65

9 00400425 Side plate assy. 1 £25.01

10 00400333 Driving pinion (OD) 1 £56.33

11 00400428 Gear with retaining ring 1 £78.25

12 00400431 Gear assy. 2 £42.22

13 00400344 Top hook assy. 1 £43.36

14 00400354 Suspension bolt 1 £2.35

15 00400449 Safety latch kit 2 £8.30

16 00400434 Chain bolt with nut 1 £2.85

17 00400342 Load hook assy 1 £40.98

18 00400329 Bushing 2 £3.84

19 00400437 Screw 8 £3.59

20 00400441 Screw and lockwasher (OD) 3 £1.74

21 00400445 Washer (OD) 2 £2.72

22 00400341 Disc hub (OD) 1 £16.96

23 00400226 Friction disc (OD) 1 £24.02

24 00400364 Brake disc (OD) 1 £19.31

25 00400227 Spring (OD) 1 £9.16

26 00400242 Bushing (OD) 1 £5.20

27 00400338 Hand chain wheel 1 £23.03

28 04300008 Load chain (per metre) 1 £11.00

29 00400361 Check washer 1 £5.70

30 09115098 Nut 1 £1.79

31 04307654 Hand chain (per metre) 1 £5.00

32 00404733 Connecting link 1 £2.48

33 00400346 Hand chain guide 1 £9.66

34 00400348 Chain wheel cover 1 £10.52

35 00400349 Supporting plate 1 £7.55

36 00400268 Cap 1 £3.95

37 00400540 Identification plate 1 £4.95

38 09126072 Grooved nail 4 £1.86


1 00400417 Gear cover assy. 1 £22.29

2 00400420 Side plate assy. 1 £38.13

3 00400269 Spacer bolt 4 £5.45

4 00400267 End cover 2 £17.09

5 00400240 Chain guide 1 £16.59

6 00400229 Stripper 1 £4.09

7 00400423 Chain stop 1 £5.20

8 00400236 Load sheave 1 £88.52

9 00400426 Side plate assy. 1 £23.15



12 00400432 Gear assy. 2 £46.43

13 00400272 Top hook assy. 1 £50.51


15 00400450 Safety latch kit 2 £8.30


17 00400274 Load hook assy. 1 £48.41

18 09151118 Bearing 2 £5.08

19 00400437 Screw 8 £3.59


21 00400445 Washer (OD) 2 £2.72

22 00400230 Disc hub (OD) 1 £19.81

23 00400226 Friction disc (OD) 1 £24.02

24 00400238 Brake disc (OD) 1 £26.37

25 00400227 Spring (OD) 1 £9.16

26 00400242 Bushing (OD) 1 £5.20

27 00400239 Hand chain wheel 1 £27.37


29 00400243 Check washer 1 £6.07

30 09115098 Nut 1 £1.79



33 00400263 Hand chain guide 1 £16.74



36 00400268 Cap 1 £3.95


38 09126072 Grooved nail 4 £1.86


3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3


(OD) = Original design brake parts.



Yalelift 360®MK I & MK II , 500 & 1000KG



173






1 00400418 Gear cover assy. 1 £36.65

2 00400421 Side plate assy. 1 £38.88

3 00400306 Spacer bolt 4 £9.41

4 00400305 End cover 2 £28.23

5 00400287 Chain guide 1 £22.66

6 00400280 Stripper 1 £4.95

7 00400424 Chain stop 1 £7.76

8 00400283 Load sheave 1 £119.10

9 00400427 Side plate assy. 1 £34.67



12 00400433 Gear assy. 2 £80.35

13 00400281 Top hook assy. 1 £56.83


15 00400451 Safety latch kit 2 £8.42


17 00400309 Load hook assy. 1 £73.42

18 09151109 Bearing 2 £29.84

19 00400438 Screw 8 £4.58


21 00400446 Washer (OD) 2 £1.12

22 00400282 Disc hub (OD) 1 £27.49

23 00400226 Friction disc (OD) 1 £14.92

24 00400285 Brake disc (OD) 1 £45.44

25 00400251 Spring (OD) 1 £6.81

26 00400289 Bushing (OD) 1 £3.34

27 00400288 Hand chain wheel 1 £50.51


29 00400290 Check washer 1 £7.43

30 09115098 Nut 1 £1.84



33 00400301 Hand chain guide 1 £17.46



36 00400268 Cap 1 £3.95


38 09126072 Grooved nail 4 £1.86


1 00400641 Gear cover assy. 1 £46.92

2 00400642 Side plate assy. 1 £49.40

3+4 00400472 End cover assy. 2 £7.30

5 00400453 Chain guide 1 £25.13

6 00400465 Stripper 1 £6.07

7 00400643 Chain stop 1 £5.32

8 00400452 Load sheave 1 £142.75

9 00400644 Side plate assy. 1 £79.49



12 00400646 Gear assy (A)+(B) 1 £137.45

13 00400478 Top hook assy. 1 £61.46

14 00400482 Suspension bolt 1 P.O.A.

15 00400647 Safety latch kit 2 £9.16


17 00400480 Bottom block assy. 1 £119.60

18 09151121 Bearing 1 £44.82

19 00400649 Screw set 1 £7.40

20 00400650 Screw and lockwasher set 1 P.O.A.

21 00400651 Washer set (OD) 1 P.O.A.

22 00400461 Disc hub (OD) 1 P.O.A.

23 00400462 Friction disc (OD) 2 £14.92

24 00400463 Brake disc (OD) 1 £24.64

25 00400251 Spring (OD) 1 £6.81

26 00400289 Bushing (OD) 1 £3.34

27 00400464 Hand chain wheel 1 £53.36


29 00400290 Check washer 1 £7.43

30 09115098 Nut 1 £1.84



33 00400468 Hand chain guide 1 £10.01



36 00400268 Cap 1 £3.95


38 09126072 Grooved nail 4 £1.86


3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3


(OD) = Original design brake parts



174




175





176


1 00400641 Gear cover assy. 1 £46.92

2 00400957 Side plate assy. 1 £51.13

3+4 00400472 End cover assy. 2 £7.30

5 00400453 Chain guide 1 £25.13

6 00400465 Stripper 1 £6.07

7 00400643 Chain stop 1 £24.64

8 00400452 Load sheave 1 £142.75

9 00400500 Side plate assy. 1 P.O.A.

10 00400761 Driving pinion 1 £24.14


12 00400646 Gear assy (A)+(B) 1 £137.20

13 00400512 Top hook assy. 1 £77.50

14 00400514 Suspension bolt 1 £23.65

15 00400955 Safety latch kit 2 £12.13

16 00400956 Chain end stop assy. 1 P.O.A.


18 09151121 Bearing 2 £44.82

19 00400649 Screw 8 £7.40

20 00400762 Disc hub 1 £14.98

21 00400849 Friction disc assy. 1 £57.82

22 00400764 Brake disc 1 £18.70

23 00400767 Spring 1 £3.10

24 00400765 Bushing 1 £8.05

25 00400884 Distance piece assy. 1 £8.17

26 00400464 Hand chain wheel 1 £53.36


28 00400290 Check washer 1 £7.43

29 09115098 Nut 1 £1.84



32 00400468 Hand chain guide 1 £5.94



35 00400268 Cap 1 £3.95


37 09128008 Grooved nail 4 £0.75

38 00400756 Roller set 1 £4.70

39 09129024 Retaining ring 1 £2.48


1 00400641 Gear cover assy. 1 £46.92

2 00400642 Side plate assy. 1 £51.13

3+4 00400472 End cover assy. 2 £7.30

5 00400453 Chain guide 1 £25.13

6 00400465 Stripper 1 £6.07

7 00400643 Chain stop 1 £24.64

8 00400452 Load sheave 1 £142.75

9 00400644 Side plate assy. 1 £77.36

10 00400761 Driving pinion 1 £24.14


12 00400646 Gear assy (A)+(B) 1 £46.92

13 00400524 Top hook assy. 1 P.O.A.

14 00400482 Suspension bolt 1 P.O.A.

15 00400958 Safety latch kit 2 £15.85

16 00400961 Chain bolt assy. 1 P.O.A.


18 09151121 Bearing 2 £44.82

19 00400649 Screw 8 £7.40

20 00400762 Disc hub 1 £14.98

21 00400849 Friction disc assy. 1 £57.82

22 00400764 Brake disc 1 £18.70

23 00400767 Spring 1 £3.10

24 00400765 Bushing 1 £8.05

25 00400884 Distance piece assy. 1 £8.17

26 00400464 Hand chain wheel 1 £53.36


28 00400290 Check washer 1 £7.43

29 09115098 Nut 1 £1.84



32 00400468 Hand chain guide 1 £5.94



35 00400268 Cap 1 £3.95


37 09128008 Grooved nail 4 £0.75

38 00400471 Distance piece 2 P.O.A.

39 00400756 Roller set 1 £4.70

40 09129024 Retaining ring 1 £2.48


3

3

3

3

3

3

3

3

3

3

3

3







177

10000kg Capacity

5000kg Capacity




178

Item Article no. Description Qty.

1 00401277 Side plate assy. (left) 1 2 00400337 Side plate assy. (right) 1 3 00401309 Load sheave assy. (right) 1 4 00400355 End cover 2 5 00400347 Distance bolt 4 6 00400328 Chain guide 1 7 00400327 Stripper 1 8 00400329 Bushing/bearing 1 9 00400607 Gear Z4 1 10 00400356 Gear A, assy. 1 11 00401113 Gear B, assy. 1 12 00401290 Drive pinion 1 13 00401227 Locating ring 2 14 00401228 Washer 1 15 00400354 Suspension bolt 1 16 00400344 Upper hook, assy. 1 17 00400449 Safety latch kit 2 18 00400342 Bottom block, assy. 1 19 00400434 Chain bolt with nut 1 20 04300008 Load chain (per mtr) 1 21 00400351 Chain end stop, assy. 1 22 00401308 Ratchet disc, assy. 1 23 00401224 Pawl 2 24 00401226 Spring 2 25 09129031 Retaining ring 2 26 00401294 Friction disc 2 27 09129033 Retaining ring 1 28 00401292 Disc hub 1 29 00401400 Hand chain wheel, assy. 1 30 00401401 Hand chain wheel 1

31 00401402 Hub 1 32 09102297 Screw 3 33 09121001 Washer 1 34 09117059 Castle nut 1 35 09125014 Cotter pin 1

36 00401404 Hand chain wheel cover 1 37 00400346 Hand chain guide 1 38 00400359 Supporting plate 1 39 00400437 Screw 8 40 00401412 Cap 1 41 09102219 Screw 3 42 00400416 Gear cover, assy. 1 43 04307654 Hand chain 1 44 00404733 Connecting link 1 45 00400540 Name plate 1

46 09128008 Grooved nail 4


NEWMODEL


1 00401231 Side plate assy. (left) 1 2 00400262 Side plate assy. (right) 1 3 00401272 Load sheave assy. (right) 1 4 00400267 End cover 2 5 00400269 Distance bolt 4 6 00400240 Chain guide 1 7 00400229 Stripper 1 8 09151118 Bushing/bearing 1 9 00401296 Gear Z4 1 10 00400259 Gear A, assy. 1 11 00400260 Gear B, assy. 1 12 00401230 Drive pinion 1 13 00401242 Locating ring 2 14 00401243 Washer 1 15 00400270 Suspension bolt 1 16 00400272 Upper hook, assy. 1 17 00400450 Safety latch kit 2 18 00400274 Bottom block, assy. 1 19 00402030 Chain bolt with nut 1 20 04307635 Load chain (per mtr) 1 21 00400247 Chain end stop, assy. 1 22 00401311 Ratchet disc, assy. 1 23 00401224 Pawl 2 24 00401226 Spring 2 25 09129031 Retaining ring 2 26 00401534 Friction disc 2 27 09129008 Retaining ring 1 28 00401223 Disc hub 1 29 00401360 Hand chain wheel, assy. 1 30 00401359 Hand chain wheel 1

31 00401358 Hub 1 32 09102297 Screw 3 33 09121006 Washer 1 34 09117058 Castle nut 1 35 09125069 Cotter pin 1 36 00401322 Hand chain wheel cover 1 37 00400263 Hand chain guide 1 38 00400266 Supporting plate 1 39 00400437 Screw 8 40 00401320 Cap 1

41 09102219 Screw 3 42 00400417 Gear cover, assy. 1 43 04307654 Hand chain 1 44 00404733 Connecting link 1 45 00400541 Name plate 1

46 09128008 Grooved nail 4

Yalelift 360®MK III, 500 & 1000KG



179


NEWMODELYalelift 360®

MK III, 500 & 1000KG



180


NEWMODEL


1 00401246 Side plate assy. (left) 1 2 00400300 Side plate assy. (right) 1 3 00401250 Load sheave assy. (right) 1 4 00400350 End cover 2 5 00400269 Distance bolt 4 6 00400287 Chain guide 1 7 00400280 Stripper 1 8 09151109 Bushing/bearing 1

9 00400278 Gear Z4 1 10 00400298* Gear A, assy. 2 11 - Gear B, assy. 1 12 00401245 Drive pinion 1 13 00401242 Locating ring 2 14 00401243 Washer 1 15 00400307 Suspension bolt 1 16 00400281 Upper hook, assy. 1 17 00400451 Safety latch kit 2 18 00400309 Bottom block, assy. 1 19 00400436 Chain bolt with nut 1 20 043007642 Load chain (per mtr) 1 21 00400294 Chain end stop, assy. 1 22 00401315 Ratchet disc, assy. 1 23 00401239 Pawl 2 24 00401241 Spring 2 25 09129042 Retaining ring 2 26 00400462 Friction disc 2 27 09129008 Retaining ring 1 28 00401238 Disc hub 1 29 00401348 Hand chain wheel, assy. 1 30 00401347 Hand chain wheel 1 31 00401346 Hub 1 32 09102197 Screw 3 33 09121006 Washer 1 34 09117058 Castle nut 1 35 09125069 Cotter pin 1 36 00401344 Hand chain wheel cover 1 37 00400301 Hand chain guide 1 38 00400304 Supporting plate 1 39 00400438 Screw 8 40 00401331 Cap 1 41 09102219 Screw 3 42 00400416 Gear cover, assy. 1 43 04307654 Hand chain 1 44 00404733 Connecting link 1 45 00400540 Name plate 1 46 09128008 Grooved nail 4


1 00401259 Side plate assy. (left) 1 2 00400454 Side plate assy. (right) 1 3 00401266 Load sheave assy. (right) 1 4 00400472 End cover 2 5 00400471 Distance bolt 4 6 00400453 Chain guide 1 7 00400465 Stripper 1 8 09151121 Bearing 2

9 00401456 Gear Z4 1 10 00400475 Gear A, assy. 1 11 00400476 Gear B, assy. 1 12 00401260 Drive pinion 1 13 00401261 Locating ring 2 14 00401255 Washer 1 15 00400482 Suspension bolt 1 16 00400478 Upper hook, assy. 1 17 00400647 Safety latch kit 2 18 00400480 Bottom block, assy. 1 19 00400828 Chain bolt with nut 1 20 04307647 Load chain (per mtr) 1 21 00400481 Chain end stop, assy. 1 22 00401313 Ratchet disc, assy. 1 23 00401252 Pawl 2 24 00401264 Spring 2 25 09129038 Retaining ring 2

26 00404732 Friction disc 2 27 09129024 Retaining ring 1 28 00401267 Disc hub 1 29 00401357 Hand chain wheel, assy. 1 30 00401352 Hand chain wheel 1 31 00401351 Hub 1 32 09102197 Screw 3 33 09121010 Washer 1 34 09117057 Castle nut 1 35 09125042 Cotter pin 1

36 00401349 Hand chain wheel cover 1 37 00400468 Hand chain guide 1 38 00400470 Supporting plate 1 39 00400649 Screw 8 40 00401338 Cap 1 41 09102199 Screw 3 42 00400489 Gear cover, assy. 1 43 04307654 Hand chain 1 44 00404733 Connecting link 1 45 00400543 Name plate 1 46 09128008 Grooved nail 4




181



MK III, 2000 & 3000KG



182


NEWMODEL


1 00401270 Side plate assy. (left) 1 2 00400502 Side plate assy. (right) 1 3 00401266 Load sheave assy. (right) 1 4 00400472 End cover 2 5 00400471 Distance bolt 4 6 00400453 Chain guide 1 7 00400465 Stripper 1 8 09151121 Bearing 2 9 00400456 Gear Z4 1 10 00400475 Gear A, assy. 1 11 00400476 Gear B, assy. 1 12 00401260 Drive pinion 1 13 00401261 Locating ring 2 14 00401255 Washer 1 15 00400514 Suspension bolt 1 16 00400512 Upper hook, assy. 1 17 00400955 Safety latch kit 1 18 00400499 Bottom block, assy. 2 19 04307647 Load chain (per mtr) 1 20 00401252 Pawl 1 21 00401264 Spring 1 22 09129038 Retaining ring 2 23 00400481 Chain end stop 1 24 00401267 Disc hub 1 25 00404732 Friction disc 2 26 00401313 Ratchet disc 2 27 09129038 Retaining ring 2 28 00401357 Hand chain wheel, assy. 2 29 00401351 Hub 1 30 00401352 Hand chain wheel 2 31 09102199 Screw 3 32 09121010 Washer 1 33 09117057 Castle nut 1 34 09125042 Cotter pin 1 35 04307654 Hand chain 1 36 00404733 Connecting link 1 37 00401349 Hand chain wheel cover 1 38 00400468 Hand chain guide 1 39 00400470 Supporting plate 1 40 00400649 Screw 8 41 00401338 Cap 1 42 09102199 Screw 3 43 00400489 Gear cover, assy. 1 44 00400756 Roller set 1 45 00400544 Name plate 1 46 09128008 Grooved nail 4


1 00401270 Side plate assy. (left) 1 2 00400502 Side plate assy. (right) 1 3 00401266 Load sheave assy. (right) 1 4 00400472 End cover 2 5 00400471 Distance bolt 4 6 00400453 Chain guide 1 7 00400465 Stripper 1 8 09151121 Bearing 2 9 00401456 Gear Z4 1 10 00400475 Gear A, assy. 1 11 00400476 Gear B, assy. 1 12 00401260 Drive pinion 1 13 00401261 Locating ring 2 14 00401255 Washer 1 15 00400514 Suspension bolt 1 16 00400512 Upper hook, assy. 2 17 00400955 Safety latch kit 2 18 00400499 Bottom block, assy. 2 19 04307647 Load chain (per mtr) 1 20 00401252 Pawl 2 21 00401264 Spring 1 22 09129038 Retaining ring 1 23 00400481 Chain end stop, assy. 2 24 00401267 Disc hub 2 25 00404732 Friction disc 2 26 00401313 Ratchet disc, assy. 1 27 09129038 Retaining ring 1 28 00401357 Hand chain wheel, assy. 1 29 00401351 Hub 1 30 00401352 Hand chain wheel 1

31 09102199 Screw 3 32 09121010 Washer 1 33 09117057 Castle nut 1 34 09125042 Cotter pin 1 35 04307654 Hand chain 1

36 00404733 Connecting link 1 37 00401349 Hand chain wheel cover 1 38 00400468 Hand chain guide 1 39 00400470 Supporting plate 1 40 00400649 Screw 8 41 00400489 Gear cover, assy. 1 42 04300013 Load chain 1 43 00400756 Roller set 1 44 00401261 Locating ring 2 45 00401255 Washer 1 46 00400545 Name plate 1 47 00401261 Grooved nail 4




NEWMODEL

10000kg Capacity

5000kg Capacity

183




184

20000kg Capacity

NEWMODEL


1 00400908 Supporting frame, assy. 12 00400933 Bottom block 13 04700067 Yalelift 360 24 00400938 Hook assy. 25 00400909 Adaptor plate 2

6 00400910 Adaptor plate 27 00400914 Pulley 58 00400915 Top hook bolt 19 00400917 Load hook bolt 110 00400916 Top pulley bolt 1

11 00400918 Bottom pulley bolt 112 00401098 Bottom pulley bolt 213 00400911 Suspension bolt 414 00550147 Supporting bolt 215 00400920 Axle support 2

16 00400919 Axle support 417 00400924 Axle support 218 00400912 Side cover 2

20000kg Capacity


19 00400962 Side cover support 2 20 00400934 Cover plate, bottom block 1 21 00400926 Distance ring 5 22 00400907 Name plate, supporting frame 1 23 00400940 Name plate, bottom block 1 24 09177096 Nut 8 25 09101023 Screw 8 26 09101016 Screw 6 27 09101418 Screw 4 28 09101013 Screw 4 29 09101415 Screw 4 30 09108052 Round head screw 8

31 09122013 Spring washer 4 32 09122016 Spring washer 4 33 09128004 Grooved pin 8 34 09153054 Washer 10 35 09153113 Needle roller 10

36 04300013 Load chain 1

Yalelift 360®MK III, 20000KG



MK III - Slipping clutch

Model Item Article no. Description Qty. Price £

Yalelift 500 1 09118034 Grooved nut 1 £ 2 09120059 Bevel spring 1 £ 3 00401288 Pressure plate 1 £ 4 00401294 Friction plate 2 £ 5 00401282 Hand chain wheel 1 £ 6 00401286 Hub 1 £



Yalelift 3000 1 09118029 Grooved nut 1 £ Yalelift 5000 2 09120049 Bevel spring 1 £ Yalelift 10000 3 00401256 Pressure plate 1 £ Yalelift 20000 4 00404732 Friction plate 2 £ 5 00401263 Hand chain wheel 1 £ 6 00401254 Hub 1 £

185




MK III, SLIPPING CLUTCH



186

VS 500 & 1000KG HAND CHAIN HOISTS (1 FALL)

Item Article no. Description Price £

1-4 00408622 Gear cover £12.23 2 09122042 Lockwasher £0.36 3 00408626 Screw £0.25 4 00408628 Screw £0.37 5 00404856 Bearing plate £18.16 6 00404857 Roller set £2.90 7 09122031 Lockwasher £0.74 8 00408635 Hex nut £0.41 9 00404858 Gear assembly £32.44 10 00404859 Drive pinion £22.29 11 00404860 Retaining ring £2.23 12 00404861 Gear £74.29 13 00408636 Side plate assembly £70.96 14 09125014 Cotter pin £0.74 15 00408641 Chain bolt £2.97

16 00408645 Chain stop £4.95 17 00406318 Guide roller £4.58 18 04307635 Load chain (per metre) £11.00 19 00404865 Load sheave £50.56 20 00404869 Roller set £6.19 21-22 00404870 Chain stripper £3.59 23 - Fastening link - 24-26 - Bolt assembly - 27 00408655 Race and pawl studs £28.68 28 09129031 Retaining ring £1.35

29 00404866 Pawl £1.74 30 00404867 Pawl spring £0.62 31 00404872 Disc hub £14.61 32 00404721 Friction disc £11.41 33 00404874 Ratchet disc £17.83

34 00408660 Hand chain wheel £15.10 35 09120907 Cotter pin £0.88 36 09117021 Castle nut £0.62 37 04307654 Hand chain (per metre) £5.00 38 00404733 Connecting pin £2.48

39+40, 2+3 00408664 Chain wheel cover £10.52 40 00408632 Screw £0.87 41-42 00404881 Crosshead assembly £10.28 42 09114056 Threaded pin £1.41 43 00404880 Ball set £1.86 44-45 00408420 Hook assembly £17.46 45 00408668 Safety latch kit £7.18 46 00405667 Coupling assembly £25.26 47 - Coupling assembly - 48 00408617 Name plate £3.84

49 09128004 Grooved nail £0.36 50 - Lockwasher - 51 - Hex nut -



16 00408646 Chain stop £5.45 17 00406819 Guide roller £4.58 18 04307635 Load chain (per metre) £11.00 19 00404458 Load sheave £88.25 20 00404489 Roller set £6.19 21-22 00404463 Chain stripper £4.09 23 - Fastening link - 24-26 - Bolt assembly - 27 00408656 Race and pawl studs £45.93 28 09129031 Retaining ring £1.35



39+40, 2+3 00408665 Chain wheel cover £13.62 40 00408633 Screw £0.87 41-42 00404481 Crosshead assembly £10.28 42 09114020 Threaded pin £1.41 43 00404479 Ball set £1.86 44-45 00408425 Hook assembly £23.03 45 00408669 Safety latch kit £7.55 46 00405668 Coupling assembly £25.38 47 - Coupling assembly - 48 00408618 Name plate £4.95



3

3

3

333

3

3

3

333







SINGLE FALL UNITS ONLY

187




188




16 00408646 Chain stop £5.45 17 00406319 Guide roller £5.70 18 04307635 Load chain (per metre) £11.00 19 00404458 Load sheave £88.52 20 00404489 Roller set £8.42 21-22 00404463 Chain stripper £4.09 23 00408649 Fastening link £28.10 24-26 00408652 Bolt assembly £3.10 27 00408657 Race and pawl studs £78.12 28 09129031 Retaining ring £1.35



39+40, 2+3 00408665 Chain wheel cover £13.62 40 00408633 Screw £0.87 41-42 00404482 Crosshead assembly £13.25 42 09114030 Threaded pin £0.50 43 00404480 Ball set £2.48 44-45 00408426 Hook assembly £33.30 45 00408670 Safety latch kit £8.42 46 - Coupling assembly - 47 00408673 Coupling assembly £51.50 48 00408619 Name plate £4.95




16 00408647 Chain stop £5.82 17 00404499 Guide roller £8.05 18 04307642 Load Chain (per metre) £14.00 19 00404750 Load sheave £153.28 20 00404754 Roller set £8.42 21-22 00404756 Chain stripper £6.56 23 00408650 Fastening link £30.58 24-26 00408653 Bolt assembly £4.33 27 00408658 Race and pawl studs £79.45 28 09129042 Retaining ring £0.62



39+40, 2+3 00408666 Chain wheel cover £24.15 40 00408633 Screw £0.87 41-42 00404768 Crosshead assembly £25.88 42 09114030 Threaded pin £0.50 43 00404767 Ball set £3.22 44-45 00408430 Hook assembly £49.15 45 00408671 Safety latch kit £9.16 46 - Coupling assembly - 47 00408674 Coupling assembly £61.78 48 00408620 Name plate £7.92

49 09128004 Grooved nail £0.36 50 09122034 Lockwasher £1.03 51 09115020 Hex nut £3.05


3

33

3

33

3

3

333

33

3







TWO FALL UNITS ONLY

189




190

VSplus 500 & 1000KG HAND CHAIN HOISTS (1 FALL)


1 00420001 Gear cover assy. 1 £16.96

2 00420002 Gear assy. 2 £32.74

3 00420003 Driving pinion 1 £22.90

4 00404860 Retaining ring 1 £2.23

5 00420004 Gear 1 £17.95


7 00420006 Top hook, assy. 1 £18.08

8 00420097 Safety latch kit 2 £7.18

9 00420007 Sideplate, assy. (gearbox) 1 £25.88


11 00420009 Stripper, assy. 1 £6.07

12 04307635 Load chain (per metre) * £11.00

13 00420010 Load sheave 1 £35.78


15 00420012 Sideplate, assy. (brake) 1 £23.03

16 00420013 Pawl spring 2 £1.00

17 00420014 Pawl 2 £1.99

18 09129031 Retaining ring 2 £0.25

19 00420015 Disc hub 1 £14.61

20 00420016 Ratchet disc 1 £18.82

21 00404721 Friction disc 2 £11.41

22 00420017 Brake dust cover 1 £12.38

23 00420018 Hand chain wheel 1 £15.72



26 09125032 Cotter pin 1 £0.50

27 09117021 Castle nut 1 £0.62


29 09115135 Nut 6 £1.12

30 00420020 Bottom block, assy. 1 £42.34

31 09128004 Grooved nail 4 £0.36


33 00420021 Chain bolt, assy. 1 £3.59


1 00420022 Gear cover assy. 1 £15.72

2 00420023 Gear assy. 2 £25.13

3 00420024 Driving pinion 1 £25.75

4 09129501 Retaining ring 1 £2.35

5 00420025 Gear 1 £29.34


7 00420027 Top hook, assy. 1 £23.03




11 00420030 Stripper, assy. 1 £7.92


13 00420031 Load sheave 1 £89.02



16 00420034 Pawl spring 2 £1.00

17 00420035 Pawl 2 £3.22

18 09129031 Retaining ring 2 £0.25

19 00420036 Disc hub 1 £16.96

20 00420037 Ratchet disc 1 £27.73

21 00404721 Friction disc 2 £11.41

22 00420038 Brake dust cover 1 £15.85

23 00420039 Hand chain wheel 1 £17.83



26 09125032 Cotter pin 1 £0.50

27 09117048 Castle nut 1 £1.37


29 09115136 Nut 6 P.O.A.


31 09128004 Grooved nail 4 £0.36


33 00420042 Chain bolt, assy. 1 £3.34

500kg/1 Capacity 1000kg/1 Capacity

3

3

3

3

3

3

3

3








191




192



1 00420043 Gear cover assy. 1 £15.72

2 00420044 Gear assy. 2 £37.27

3 00420045 Driving pinion 1 £26.50

4 09129019 Retaining ring 1 £0.87

5 00420046 Gear 1 £37.39


7 00420048 Top hook, assy. 1 £33.30




11 00420051 Stripper, assy. 1 £6.07


13 00420052 Load sheave 1 £76.65



16 00420055 Pawl spring 2 £2.48

17 00420056 Pawl 2 £3.47

18 09129042 Retaining ring 2 £0.62

19 00420057 Disc hub 1 £27.98

20 00420058 Ratchet disc 1 £34.17

21 00404731 Friction disc 2 £10.15

22 00420059 Brake dust cover 1 £22.29

23 00420060 Hand chain wheel 1 £31.94



26 09125014 Cotter pin 1 £0.75

27 09117048 Castle nut 1 £1.37


29 09115098 Nut 6 £1.84


31 09128004 Grooved nail 4 £0.36


33 00420063 Chain bolt, assy. 1 £1.99

34 09115036 Nut 3 £0.50


1 00420064 Gear cover assy. 1 £34.67

2 00420065 Gear assy. 2 £62.28

3 00420066 Driving pinion 1 £61.78

4 09129009 Retaining ring 1 £1.12

5 00420067 Gear 1 £61.90


7 00420069 Top hook, assy. 1 £49.40




11 00420072 Stripper, assy. 1 £11.51


13 00420073 Load sheave 1 £114.65



16 00420076 Pawl spring 2 £1.49

17 00420077 Pawl 2 £10.28

18 09129033 Retaining ring 2 £0.62

19 00420078 Disc hub 1 £38.26

20 00420079 Ratchet disc 1 £46.18

21 00404732 Friction disc 2 £10.52

22 00420080 Brake dust cover 1 £34.67

23 00420081 Hand chain wheel 1 £46.92



26 09125014 Cotter pin 1 £0.75

27 09117054 Castle nut 1 £1.73


29 09115036 Nut 6 £0.50


31 09128004 Grooved nail 4 £0.12


33 00420084 Chain bolt, assy. 1 £3.10

34 09115115 Nut 3 £0.25


3

3

3

3

3

3

3

3


NB: CMCO have a minimum order value of £30 net..






193




194



1 00420022 Gear cover assy. 1 £15.72

2 00420023 Gear assy. 2 £25.13

3 00420024 Driving pinion 1 £25.75

4 09129501 Retaining ring 1 £2.35

5 00420025 Gear 1 £29.34


7 00420086 Top hook, assy. 1 £33.30




11 00420030 Stripper, assy. 1 £7.92


13 00420031 Load sheave 1 £89.02


15 00420103 Sideplate, assy. (brake side) 1 £26.50

16 00420034 Pawl spring 2 £1.00

17 00420035 Pawl 2 £3.22

18 09129031 Retaining ring 2 £0.25

19 00420036 Disc hub 1 £16.96

20 00420037 Ratchet disc 1 £27.73

21 00404721 Friction disc 2 £8.79

22 00420038 Brake dust cover 1 £15.85

23 00420039 Hand chain wheel 1 £17.83



26 09125032 Cotter pin 1 £0.50

27 09117048 Castle nut 1 £1.37


29 09115036 Nut 6 £1.77


31 09128004 Grooved nail 4 £0.36


33 00420088 Chain bolt, assy. 1 £11.90


1 00420043 Gear cover assy. 1 £15.72

2 00420044 Gear assy. 2 £37.27

3 00420045 Driving pinion 1 £26.50

4 09129019 Retaining ring 1 £0.87

5 00420046 Gear 1 £37.39


7 00420090 Top hook, assy. 1 £49.15




11 00420051 Stripper, assy. 1 £6.07


13 00420052 Load sheave 1 £75.65


15 00420105 Sideplate, assy. (brake side) 1 £48.53

16 00420055 Pawl spring 2 £2.48

17 00420056 Pawl 2 £3.47

18 09129042 Retaining ring 2 £0.62

19 00420057 Disc hub 1 £27.98

20 00420058 Ratchet disc 1 £34.17

21 00404731 Friction disc 2 £10.15

22 00420059 Brake dust cover 1 £22.29

23 00420060 Hand chain wheel 1 £31.94



26 09125014 Cotter pin 1 £0.75

27 09117048 Castle nut 1 £1.37


29 09115098 Nut 6 £1.84


31 09128004 Grooved nail 4 £0.36


33 00420092 Chain bolt, assy. 1 13.25

34 09115036 Nut 3 £1.77


3

3

3

3

3

3

3

3

3

3







TWO FALL UNITS ONLY

195




196

VSplus 5000KG HAND CHAIN HOISTS

5000kg Capacity - TWO FALL UNIT


1 00420064 Gear cover, assy. 1 £34.67 2 00420065 Gear assy. 2 £62.28 3 00420066 Driving pinion 1 £61.78 4 09129009 Retaining ring 1 £1.11 5 00420067 Gear 1 £61.90 6 00420093 Suspension bolt 1 £7.43 7 00420094 Top hook, assy. 1 £98.23 8 00420101 Safety latch kit 2 £12.13 9 00420070 Side plate, assy. (gear box side) 1 £190.95 10 00420071 Chain end stop, assy. 1 £11.51 11 00420072 Stripper, assy. 1 £11.51 12 04307647 Load chain (per metre) 1 £20.00 13 00420073 Load sheave 1 £114.65 14 00420074 Chain guide roller 2 £13.50 15 00420107 Side plate assy. (brake side) 1 £79.36 16 00420076 Pawl spring 2 £1.49 17 00420077 Pawl 2 £10.28 18 09129033 Retaining ring 2 £0.62 19 00420078 Disc hub 1 £38.26 20 00420079 Ratchet disc 1 £46.18 21 00404732 Friction disc 2 £10.52 22 00420080 Brake dust cover 1 £34.67 23 00420081 Hand chain wheel 1 £46.92 24 00404733 Connecting link 1 £2.48 25 04307654 Hand chain (per metre) 1 £5.00 26 09125014 Cotter pin 1 £0.74 27 09117054 Castle nut 1 £1.73 28 00420082 Chain wheel cover 1 £39.74 29 09115036 Nut 3 £0.50 30 00420095 Bottom block, assy. 1 £169.00 31 09128004 Grooved nail 4 £0.36 32 00400740 Identification plate 1 £10.15 33 00420096 Fastening link, assy. 1 £11.51 34 09115115 Nut 3 £0.25

33

3

333

3

3






197

TPM 100 - 1000KG MAGNET SPARES

100 - 2000kg Capacity

1

2

3




Item Description Article no. / price £ Qty.

TPM 1 TPM 3 TPM 5 TPM 8 TPM 10

1 Hand lever 59000771 59000772 59000774 59000774 59000774 1 £17.04 £24.65 £34.52 £34.52 £34.52

2 Suspension eye 59000746 59000747 59000748 59000749 59000749 1 £18.59 £22.00 £22.00 £33.77 £33.77

3 Locking mechanism 59000751 59000752 59000752 59000754 59000754 1 £27.12 £30.70 £33.77 £33.77 £33.77

4 ID plate 59000790 59000791 59000788 59000792 59000793 1 £5.28 £5.28 £5.28 £5.28 £5.28

4



198


HOIST MAIN FRAME

Item Description Qty. CPV/F 2-8 CPV/F 5-4 CPV/F 5-8 CPV/F 10-4 CPV/F 10-8 CPV/F 20-4 Article no. Article no. Article no. Article no. Article no. Article no. 1 Gear box assembly 1 00670085 00670085 00670085 00670085 00670252 00670252 2 Cover load sheave 1 00670056 00670056 00670056 00670056 00670170 00670170 3 Suspension bolt 2 00670061 00670061 00670061 00670061 00670185 00670185 4 Cover screw fan 8 00670062 00670062 00670062 00670062 00670186 00670186 5 Motor assembly (1G) 1 00670347 00670347 00670348 00670348 00670349 00670349 5 Motor assembly (2G) 1 00670089 00670089 00670074 00670074 00670138 00670138 6 Clutch plate assembly 1 00670075 00670075 00670075 00670075 00670148 00670148 7 Spacer sleeve 1 00670126 00670126 00670126 00670126 00670152 00670152 8 Brake assembly 1 00670304 00670304 00670192 00670192 00670068 00670068 8a Adapter flange brake 1 00670303 00670303 - - 00670319 00670319 8b Spacer brake 1 00670305 00670305 - - - - 8c Screw 3 09102256 09102256 - - 09102146 09102146 9 Cover control 1 00670057 00670057 00670057 00670057 00670171 00670171 10 Cover screw control 4 00670078 00670078 00670078 00670078 00670187 00670187 11 Stripper 1 00670189 00670189 00670079 00670079 00670191 00670191 12a Chain entry plate (old) 1 00670188 00670188 00670072 00670072 00670174 00670174 12b Chain entry plate (new) 1 00670615 00670615 00670612 00670612 00670617 00670617 13 Chain latch 1 - 00670193 - 00670111 - 00670172 13a Cover plate chain latch 1 00670394 - 00670394 - 00670395 -

14 Chain bolt 1 - 00670270 - 00670269 - 00670271 15 Chain guide 2 00670182 00670182 00670110 00670110 00670100 00670100 16 Load sheave 1 00670183 00670183 00670109 00670109 00670190 00670190 17 Fan cover assembly 1 00670055 00670055 00670055 00670055 00670243 00670243 18 Cable sleeve (KT 9) 1 00670087 00670087 00670087 00670087 00670087 00670087 19 Cable sleeve (KT 11) 1 00670213 00670213 00670213 00670213 00670213 00670213 20 Gear box gasket** mtr 00670077 00670077 00670077 00670077 00670077 00670077 21 Control board (1G) 1 00670346 00670346 00670346 00670346 00670346 00670346 21 Control board (2G) 1 00670060 00670060 00670060 00670060 00670060 00670060 22 Mounting plate 1 00670236 00670236 00670236 00670236 00670238 00670238 23 Spacer 2 00670177 00670177 00670177 00670177 00670177 00670177 24 Spacer 1 00670214 00670214 00670214 00670214 00670214 00670214 25 Transformer 1 00719737 00719737 00719737 00719737 00719737 00719737 26 Microswitch 2 00670073 00670073 00670073 00670073 00670073 00670073 27 Name plate (1G) 1 00670350 00670350 00670351 00670351 00670352 00670352 27 Name plate (2G) 1 00670324 00670324 00670221 00670221 00670267 00670267 28 Cup spring 5 09120056 09120056 09120056 09120056 09120055 09120055 29 Bearing 1 09150032 09150032 09150032 09150032 09151139 09151139 30 Retaining ring 1 09129042 09129042 09129042 09129042 09129033 09129033 31 Retaining ring 1 09129038 09129038 09129038 09129038 09129023 09129023 32 Retaining ring 1 09129001 09129001 09129001 09129001 09129043 09129043 33a Screw (old/short) 4 09102280 09102280 09102280 09102280 09102297 09102297 33b Screw (new/long) 4 09102248 09102248 09102248 09102248 09102281 09102281 34 Screw chain latch 4 - 09101706 - 09101706 - 09101707 34a Screw cover plate latch 4 09102265 - 09102265 - 09102260 - 35 Screw 3 09102287 09102287 09102287 09102287 09102287 09102287 36 Screw 2 09102292 09102292 09102292 09102292 09102301 09102301

37 Screw 2 09102293 09102293 09102293 09102293 09102306 09102306 38 Lock washer 4 09123038 09123038 09123038 09123038 09123027 09123027 39 Fitting key 1 09131084 09134084 09131084 09131084 09131069 09131069 40 Self cutting screw 4 09108054 09108054 09108054 09108054 09108054 09108054 41 Bumper chain end stop 1 00670137 00670137 00670134 00670134 00670251 00670251 42 Chain end stop assy. 1 00670239 00670239 00670240 00670240 00670241 00670241 43 Bumper bottom block 1 00670137 00670226 00670134 00670231 00670251 00670263 44 Bottom block assy. 1 00670135 00670209 00670133 00670194 00670256 00670260 45 Lug 1 00670048 00670048 00670048 00670048 00670184 00670184 45a Top hook 1 00670425 00670425 00670425 00670425 00670470 00670470 46 Capacity plate 1 00670321 00670235 00670235 00670320 00670268 00670325 47 Hook assy. 1 00670128 00670128 00670128 00670195 00670195 00670259 48 Safety latch kit 1 00400450 00400450 00400450 00400451 00400451 00400647 49 Load chain mtr 07989710 07989710 07986239 07986239 07993403 07993403 50 Reinforcing plate 2 00670537 00670537 00670537 00670537 00670538 00670538 51 Spec. plate (1G) 1 00670637 00670637 00670642 00670642 00670647 00670647 51 Spec. plate (2G) 1 00670634 00670634 00670639 00670639 00670644 00670644

52 Washer 2 09121214 09121214 09121214 09121214 09121001 09121001 53 Brass inserts 2 00670613 00670613 00670613 00670613 00670613 00670613

** Length CPV/F 2-8/5-4/5-8/10-4 = 700mm, Length CPV/F 10-8/20-4 = 920mm.

3

3

3

333

33

3

3

3333

33






MOTOR - Model: CPV/F 2-8/5-4/5-8/10-4

HOIST MAIN FRAME

TO SUIT ALL MODELS


1 00670052 Stator assembly 1 2 00670119 Rotor assembly 1 3 00670067 End plate 1 4 09101694 Screw motor 4 5 09151014 Bearing 1 6 00670122 Set screw 1 7 00670080 Fan 1 8 09131075 Flat key 1 9 09129033 Retaining ring 1 10 00670081 Thread insert 4

MOTOR - Model: CPV/F 10-8/20-4


1 00670139 Stator assembly 1 2 00670144 Rotor assembly 1 3 00670143 End plate 1 4 00670434 Screw motor 4 5 09151018 Bearing 1 6 00670147 Set screw 1 7 00670153 Fan 1 8 09131056 Flat key 1 9 09129016 Retaining ring 1 10 00670151 Thread insert 4

199


CPV/F MOTOR




GEAR BOX TO SUIT:

CPV/F 2-8/5-4/5-8/10-4

GEAR BOX - Model: CPV/F 2-8/5-4/5-8/10-4

Item Article no. Description Qty. 1 00670353 Gear housing 1 2 00670082 Counterweight 1 3 00670117 Seal gear cover 1 4 00670115 Gear 1 5 00670086 Bearing cover 1 6 00670106 Drive pinion 1 7 00670114 Pinion shaft 1 8 00670067 Spacer 1 9 00670113 Gear Z2 1 10 00670069 Bearing cover 1 11 00670084 Bearing cover 1 12 00670102 Drive pinion assembly 1 13 00670071 Spacer 1 14 09131041 Fitting key 1 15 09131033 Fitting key 1

GEAR BOX - Model: CPV/F 2-8/5-4/5-8/10-4


16 09150032 Bearing 1 17 09150022 Bearing 1 18 09150011 Bearing 1 19 09150009 Bearing 1 20 09150038 Bearing 1

21 09151135 Bearing 1 22 09172114 Oil seal 1 23 09172115 Oil seal 1 24 09172019 Oil seal 1 25 09102291 Screw 4

26 09129038 Retaining ring 2 27 09129023 Retaining ring 1 28 09129025 Retaining ring 1 29 09134027 Spring pin 2

200



201


GEAR BOX - Model: CPV/F 10-8/20-4


1 00670354 Gear housing 1 2 00670173 Counterweight 1 3 00670355 Seal gear cover 1 4 00670159 Gear 1 5 00670162 Bearing cover 1 6 00670158 Drive pinion 1 7 00670155 Pinion shaft 1 8 00670157 Pinion shaft 1 9 00670154 Gear 1 10 00670156 Gear 1 11 00670084 Bearing cover 1 12 00670163 Bearing cover 1 13 00670306 Bearing cover 1 14 00670318 Bearing cover 1 15 00670097 Drive pinion assembly 1 16 00670160 Spacer 1 17 00670317 Spacer 1 18 09150043 Bearing 1 19 09150022 Bearing 1 20 09150011 Bearing 1

GEAR BOX - Model: CPV/F 10-8/20-4


21 09150001 Bearing 1 22 09150002 Bearing 1 23 09150005 Bearing 1 24 09151053 Bearing 1 25 09150056 Bearing 4 26 09129042 Retaining ring 2 27 09129038 Retaining ring 1 28 09129008 Retaining ring 1 29 09129001 Retaining ring 2 30 09129002 Retaining ring 1 31 09172117 Oil seal 1 32 09172053 Oil seal 1 33 09172118 Oil seal 1 34 09131089 Fitting key 4 35 09131053 Fitting key 4 36 09131090 Fitting key 2 37 09102298 Screw 1 38 09130001 Retaining ring 1 39 09134027 Spring pin 2

GEAR BOX TO SUIT:

CPV/F 10-8/20-4



202

LODESTAR 110-230v ELECTRIC CHAIN HOISTS (1ph)

MAIN FRAME - Models: C & F


1 4300006689 Motor housing cover 1 £66.50 2 4300006675 Back frame cover 1 £52.00 3 4300006690 Back frame 1 £51.00 4 4300006710 Gear housing with bearing 1 £54.00 5 4300006676 Motor housing 1 £75.00 6a 4300006706 Stator 1/2 HP with Klixon 1 £142.00 6b 4300006705 Rotor and shaft 1/2 HP 1 £128.00 7 4300008155 Protector kit (model C) 1 £130.00 7 4300008156 Protector kit (model F) 1 £120.00 7a 4300006714 Protector 1 £68.00 8 4300006855 Screw motor housing cover 2 £0.90 10 4300006848 Lock washer (all models) 2 £0.25 10 4300006849 Weatherproof washer 2 £0.25 13 4300006684 Lift wheel 1 £78.00 14 4300006914 Load chain (6.3 x 18.9mm) mtr £16.00 zinc plated, grade 80 14 0087300011 Load chain (6.3 x 18.9mm) mtr £61.00 stainless steel, grade 60

19 4300006819 Screw 3 £1.50 21 4300006834 Suspension nut 2 £0.80 24 4300008157 End cover alignment pin 8 £0.45 25 4300006674 Chain guide 2 £13.00 27 4300006697 Gasket gear housing 1 £4.00 28 4300006699 Gasket back frame 1 £4.50 29 4300006698 Gasket motor housing cover 1 £2.50 30 4300008158 Drive shaft and pinion 1 £48.00 31 4300006696 Capacitor 1 £21.00 34 4300006671 Contactor (48v 1ph) 1 £120.00 35 4300006719 Mainline contactor (e.stop) 1 £32.00 36 4300006679 Reversing switch 1 £56.00 37 4300006704 Transformer with fuse (110v) 1 £48.00 37 4300006703 Transformer with fuse (230v) 1 £65.00 38 4300006693 Brake complete (230v/110v) 1 £127.00 39 4300006709 Brake base plate 1 £21.00 40 4300006692 Brake disc 2 £20.00 41 4300008159 Brake intermediate plate 1 £10.00 42 4300006711 Brake armature assembly 1 £29.00 43 4300008160 Brake spring 2 £1.00 44 4300006810 Brake coil (110v 1ph) 1 £45.00 45 4300007693 Strap coil retainer 1 £1.00 46 4300008161 Brake field sub assembly 1 £43.00 47 4300006683 Limit shaft 56 TPI 1 £18.00 47 4300006678 Limit shaft 64 TPI 1 £25.00 48 4300006779 Limit nut 56 TPI 2 £8.00 48 4300006780 Limit nut 64 TPI 2 £10.00 49 4300006695 Gear limit assembly 1 £10.00 50 4300006724 Limit switches kit 1 £20.00 51 4300006686 Limit switch bracket 1 £14.00 52 4300006680 Capacity label (250kgs) 1 £4.50 53 4300006681 Capacity label (500kgs) 1 £4.50 54 4300006677 Lodestar label 1 £5.00 55 4300006768 ID plate 1 £3.50

MAIN FRAME - Models: J, L, R, & RT (continued)


7 4300006773 Protector kit (L, R & RT) 1 £158.00 7a 4300008136 Protector (model J) 1 £110.00 7a 4300006790 Protector (L, R & RT) 1 £110.00

8 4300006856 Screw motor housing cover 2 £1.25 9 4300006821 Stator screw 4 £1.50 10 4300006848 Lock washer (all models) 6 £0.25 10 4300006849 Weatherproof washer (all) 6 £0.25 11 4300006848 Stator screw lockwasher 2 £0.25 12 4300006798 Contact block (model R) 1 £26.00 13 4300006739 Liftwheel 1 £115.00 14 4300006916 Load chain (7.9 x 21.7mm) mtr £19.00 15 4300006738 Dead end block (model R) 1 £17.00 16 4300008139 Pin dead end (model R) 1 £2.50 17 4300008140 Split pin (model R) 1 £0.25 18 4300008141 Washer (model R) 1 £0.25 19 4300006846 Screw 4 £1.50 20 4300006730 Anchor susp. adaptor (J, L & R) 2 £7.00 20 4300006771 Anchor susp. adaptor (RT) 2 £13.00 21 4300006837 Suspension nut 2 £0.90 22 4300006840 Black frame screw 2 £1.45 23 4300008142 Alignment pin 8 £0.25 24 4300006854 Back frame screw 2 £1.45 25 4300006728 Chain guide 2 £18.50 26 4300006761 Back frame dowel 2 £0.90 27 4300006756 Gasket gear housing 1 £6.00 28 4300006766 Gasket back frame cover 1 £4.50 29 4300006767 Gasket motor house cover 1 £4.50 30 4300008143 Drive shaft and pinion (J) 1 £95.00 30 4300008144 Drive shaft and pinion (L-RT) 1 £74.00

31 4300006672 Capacitor (pre CE hoist) 1 £63.00 31 4300006735 Start capacitor 1 £63.00 32 4300006734 Run capacitor 1 £38.00 33 4300006721 Contactor mounting plate 1 £25.00 34 4300006720 Reversing contactor (1ph) 1 £120.00 34 4300007255 Reversing contactor (sq.D) 1 £126.00 34 4300006671 Reversing contactor (400/24v) 1 £126.00

35 4300006799 Mainline contactor (e.stop) 1 £67.00 36 4300006747 Reversing switch 1 £63.00 37a 4300006704 Transformer with fuse (110v 1ph) 1 £48.00 37b 4300006703 Transformer with fuse (230v/415v) 1 £48.00 37c 4300007527 Transformer with fuse (415/110v sec) 1 £57.00 - 4300006691 Fuse slow burn 1 £1.80 38 4300006754 Brake complete (110v 1ph) 1 £159.00 38 4300008145 Brake complete (230v/415v) 1 £159.00 39 4300006898 Brake base plate and stud 1 £30.00

40 4300006752 Brake disc 2 £25.00 41 4300007694 Brake intermediate plate 1 £15.50 42 4300006749 Brake armature assembly 1 £46.00 43 4300008146 Brake spring 1 £1.50 44 4300006809 Brake coil (110v 1ph) 1 £56.00 44 4300008147 Brake coil (230v/415v) 1 £55.00 45 4300007692 Strap coil retainer 1 £1.00 46 4300008148 Brake field sub assembly 1 £46.00 47 4300006778 Limit shaft 56 TPI 1 £25.00 47 4300006781 Limit switch shaft 64 TPI 1 £39.00 48 4300006779 Limit nut 56 TPI 2 £8.00 48 4300006780 Limit nut 64 TPI 2 £10.00 49 4300006759 Gear limit assembly 1 £10.00 50 4300006725 Limit switches kit 1 £22.00 51 4300006789 Limit switch bracket 1 £18.00 52 4300006791 Hex brake stud 1 £11.00 52a 4300006765 Hex brake stud spring 1 £0.40 53 4300006731 Capacity label (1000kgs) 1 £5.00 53 4300006732 Capacity label (2000kgs) 1 £6.00 53 4300006733 Capacity label (3000kgs) 1 £6.50 54 4300006677 Lodestar label 1 £6.00 55 4300006769 ID plate 1 £3.50

MAIN FRAME - Models: J, L, R, & RT


1 4300006772 Motor housing cover 1 £79.50 2 4300006775 Back frame cover 1 £59.00 3 4300006729 Back frame 1 £96.00 4 4300006750 Gear housing (mod. J, L & R) 1 £106.00 4 4300006784 Gear housing (model RT) 1 £139.00 5 4300006667 Motor housing (mod. J, L & R) 1 £132.00 5 4300006777 Motor housing (model RT) 1 £132.00 6 4300006794 Stator c/w rota with Klixon 1 £433.00

For 400v spares

please contact thesales office*

33

3

3

3

3

3

33

3

33

3

3

33

3

33

3

33

33

3

333

3

3






203

LODESTAR 110-230v ELECTRIC CHAIN HOISTS (1ph)

TO SUIT ALL MODELS

MAIN FRAME PARTS

TO SUIT MODELS: J, L, R, & RT

TO SUIT

MODELS: C & F

For 400v spares

please contact thesales office*



204

LODESTAR 110, 230 & 400v ELECTRIC CHAIN HOISTS

TOP HOOK - Models: C & F


1 4300006889 Top hook assy. complete 1 £44.00 2 4300008089 Top hook 1 £20.00 3 4300006805 Safety latch kit 1 £3.50 5 4300006687 Suspension screw kit (2) 1 £4.00 6 4300008090 Suspension mounting 1 £15.00 7 4300006685 Hook locking nut 1 £8.00 8 4300008091 Hook nut pin 1 £0.80

SINGLE FALL BOTTOM HOOK - Models: C, F, J, & L


1 4300006712 Bottom hook assy. (C & F) 1 £71.50 1 4300013779 S/Steel bottom hook assy. (C & F) 1 £223.00 1 4300006755 Bottom hook assy. (J & L) 1 £89.00 2 4300008104 Bottom hook (C & F) 1 £23.50 2 4300008105 Bottom hook (J & L) 1 £26.00 3 4300006805 Safety latch kit (C & F) 1 £3.50 3 4300006806 Safety latch kit (J & L) 1 £4.00 4 4300008106 Hook body sleeve (C & F) 1 £12.00 4 4300008107 Hook body sleeve (J & L) 1 £14.00 5 4300008108 Hook washer 1 £0.25 6 4300008109 Thrust bearing 1 £6.00 7 4300008110 Bottom hook nut 1 £2.00 8 4300008111 Pin 1 £0.25 9 4300008112 Chain block pin (C & F) 1 £2.00 9 4300008113 Chain block pin (J & L) 1 £2.00 10 4300008114 Chain block (C & F) 1 £9.00 10 4300008115 Chain block (J & L) 1 £10.00

TWO FALL BOTTOM HOOK - Model: R


2 4300008116 Bottom hook 1 £47.00 3 4300006807 Safety latch kit 1 £4.50 6 4300008117 Thrust bearing 1 £18.00 8 4300008118 Pin 1 £3.00 11 4300008119 Hook collar 1 £13.50 12 4300006751 Bottom hook assy. complete 1 £169.00 13 4300008120 Hook block 2 £10.00 14 4300008121 Hook block bearing 2 £5.00 15 4300008122 Load sheave 1 £30.00 16 4300008123 Hook block screw long 2 £1.00 16a 4300008124 Hook block screw short 1 £1.00 17 4300008125 Nut 3 £0.25 18 4300008126 Washer 3 £0.25

THREE FALL BOTTOM HOOK - Model: RT


3 4300008127 Safety latch kit 1 £4.50 6 4300008128 Thrust bearing 1 £18.00 7 4300008129 Bottom hook nut 1 £14.00 8 4300008130 Pin 1 £1.00 19 4300006785 Bottom hook assy. complete 1 £259.00 20 4300008131 Hook block 2 £77.00 21 4300008132 Hook block bearing 2 £5.00 22 4300008133 Load sheave 1 £81.00 23 4300006861 Dead end screw and nut 1 £23.00 24 4300008134 Hook block screws and nut 2 £4.50 25 4300008135 Bottom hook assy. 1 £80.00

ACCESSORIES


- 4300006522 Pendant, 2 button with e.stop 1 £78.00 - 4300009282 Pendant cable, 5c 1 £7.50 - 4300006716 Control cable grommet 1 £3.00 - 4300006682 Mains cable grommet 1 £3.00 - 4300006914 Load chain (C & F) mtr £16.00 - 4300006916 Load chain (J, L, R & RT) mtr £19.00 - 4300006668 Chain end stop (C & F) 1 £33.50 - 4300006669 Chain end stop (J, L, R & RT) 1 £36.50 - 4300007040 110v, 16amp cee-form plug 1 £6.00 - 4300007041 110v, 32amp cee-form plug 1 £13.00 - 4300012954 Raincoat (C & F) 1 £65.00 - 4300012953 Raincoat (J, L, R & RT) 1 £80.00 - 4300010000 Grease (1/2lb can) 1 £13.00 - 4300006872 Folding handles (sold in pairs) 2 £7.50 - 4300007037 110v Yellow mains cable mtr £4.50 - 4300007036 230v Blue mains cable mtr £4.50 - 4300007038 16A ‘C’ Form 240v blue plug 1 £8.50 - 4300007039 32A ‘C’ Form 240v blue plug 1 £10.50

TOP HOOK - Models: J & L


1 4300006900 Top hook assy. complete 1 £89.00 2 4300008092 Top hook 1 £29.00 3 4300006806 Safety latch kit 1 £4.00 5 4300006748 Suspension screw kit (2) 1 £5.50 6 4300008093 Suspension mounting 1 £18.00 7 4300006744 Hook locking nut 1 £9.50 8 4300008094 Hook nut pin 1 £0.25

TOP HOOK - Model: R


1 4300006902 Top hook assy. complete 1 £112.00 2 4300008095 Top hook 1 £30.00 3 4300006807 Safety latch kit 1 £4.50 4 4300008096 Dead end bolt 1 £13.00 5 4300006748 Suspension screw kit (2) 1 £5.50 6 4300008097 Suspension mounting 1 £22.00 7 4300006746 Hook locking nut 1 £14.50 8 4300008098 Hook nut pin 1 £0.25 9 4300006812 Dead end pin 1 £2.50 10 4300008099 Split pin 1 £0.25 11 4300008100 Washer 1 £0.25 12 4300006738 Dead end block 1 £17.00

LUG SUSPENSION (MDT TROLLEYS)


13 4300006722 Lug assy. complete (C & F) 1 £54.00 14 4300006800 Lug assy. complete (J & L) 1 £60.00 15 4300006792 Lug assy. complete (R) 1 £78.00 16 4300013332 Lug assy. complete (RT) 1 £125.00 17 4300008101 Lug (C & F) 1 £28.00 18 4300006745 Lug (J & L) 1 £31.00 19 4300006742 Lug (R) 1 £34.00

• For all other common parts please see above capacities

TOP HOOK AND SHEAVE HANGER - Model: RT


15 4300006928 Top hook assy. complete 1 £148.00 2 4300008102 Top hook 1 £45.00 3 4300006807 Safety latch kit 1 £4.50 5 4300006748 Suspension screw kit (2) 1 £5.50 6 N/A Only available as part of item 15 - - 7 4300006783 Hook locking nut 1 £33.00 8 4300008103 Hook nut pin 1 £0.25 17 4300006770 Sheave hanger casting 1 £53.00 18 4300006822 Bearings 2 £3.00 19 4300006782 Upper sheave 1 £55.00 20 4300006804 Circlip 2 £0.80 21 4300006859 Clover leaf and screws 1 £18.00 22 4300006860 Sheave stud assembly 1 £107.00 23 4300006786 Sheave hanger complete 1 £178.00

3

3

3

3

3

3

3333

3

3

3

3

3 3

3

3

3

3






205

LODESTAR 110, 230 & 400v ELECTRIC CHAIN HOISTS

UPPER AND LOWER HOOK ASSEMBLIES

TOP HOOK SUSPENSION TO

SUIT MODELS: C, F, J, L, R, & RT

TOP HOOK & SHEAVE HANGER

TO SUIT MODEL: RT

SINGLE FALL BOTTOM HOOK

TO SUIT MODELS: C, F, J, & L

TWO FALL BOTTOM HOOK

TO SUIT MODEL: R

TRIPLE FALL BOTTOM HOOK

TO SUIT MODEL: RT

LUG SUSPENSION TO

SUIT MODELS: C, F, J, L, & R



206

CPS 110, 230 & 400v ELECTRIC CHAIN HOISTS


1 4300008259 Capacity label (125kg) 1 £3.25 1 4300008260 Capacity label (250kg) 1 £3.25

2 4300006658 Power cable grommet 1 £2.00 3 4300006654 Control cable grommet 1 £4.00 4 4300006662 Brake end cover screw 3 £2.00 5 4300008261 Brake end cover 1 £15.00

6 4300008352 Brake base plate 1 £10.50 6a 4300008384 Brake spacer 1 £4.00 6b 4300008385 Brake armature 1 £8.00 6c 4300008386 Brake spring 1 £1.00

7 4300006650 Brake field (110v) 1 £40.00 7 4300006649 Brake field (400v & 230v) 1 £42.00

8 4300008262 Brake assembly 1 £20.00 9 4300008263 Eyebolt 1 £1.50 9a 4300008265 Eyebolt nut 1 £0.15 10 4300008266 Gear housing screw 4 £0.50 11 4300008267 Gear housing spacer 4 £0.25

12 4300008269 Clutch assembly 4m/min 1 £75.00 12 4300008270 Clutch assembly 10m/min 1 £84.00

13 4300008271 Gear housing 1 £30.00 14 4300008272 Pinion bearing 1 £5.00

15 4300008273 Pinion thrust washer 2 £0.25 16 4300008274 Pinion shaft 1 £38.00

17 4300008277 Lift wheel shaft seal 1 £0.75 18 4300008278 Lift wheel shaft 1 £8.85 19 4300008279 Lift wheel thrust washer 2 £0.25 20 4300008283 Lift wheel bearing 1 £4.00 21 4300008284 Lift wheel & gear ass. 4m/min 1 £64.00

21 4300008285 Lift wheel & gear ass. 10m/min 1 £64.00

22 4300008286 Lift wheel seal 1 £4.00 23 4300008287 Frame pin 2 £0.10 24 4300006648 Top hook including latch 1 £16.00 25 4300006655 Hook retainer & screw 1 £2.50

26 4300008288 ID label (125kg-110v) 1 £3.50 26 4300008289 ID label (125kg-230v) 1 £3.50 26 4300008290 ID label (250kg-110v) 1 £3.50 26 4300008291 ID label (250kg-230v) 1 £3.50 26 4300008292 ID label (125kg-400v,4m/min) 1 £3.50 26 4300008293 ID label (250kg-400v,4m/min) 1 £3.50 26 4300008294 ID label (125kg-400v,10m/min) 1 £3.50 26 4300008295 ID label (250kg-400v,10m/min) 1 £3.50


27 4300008296 Main frame for LV control 1 £33.50

28 4300007937 Cut out device (110v) 1 £19.00 28 4300006660 Cut out device (230v) 1 £19.00

29 4300006652 Motor stator (110v) 1 £105.00

29 4300008298 Motor stator (230v) 1 £118.00

29 4300008299 Motor stator (400v) 1 £183.00 30 4300008300 Rotor assy. c/w bearings 1 £86.00

31 4300008324 Pin retainer plate 1 £3.00 32 4300008325 Retainer plates screw 2 £0.10 33 4300008301 Motor end cover 1 £42.50 34 4300006832 Motor cover screw 3 £2.00 35 4300008302 “Yale” brand logo 1 £3.50

36 4300006938 Single fall bottom block 1 £21.00 37 4300006939 Double fall bottom block 1 £76.00 38 4300006845 Hook latch kit 1 £3.00

39 4300008303 Chain guide/stripper pin 4 £0.75 40 4300006644 Stripper 1 £13.00

41 07600001 Load chain (4 x 12.2mm) mtr £11.00 42 4300008304 Chain end stop 1 £8.60 43 4300008306 Loose end ring 1 £0.25

44 4300006643 Chain guide 1 £16.00 45 4300006657 Gasket 1 £1.50

46 4300008307 Dead end pin 1 £0.10 47 4300008308 Dead end plate 1 £1.00 47a 4300008309 Dead end plate screws 2 £0.25

48 4300006661 Reversing contactor (48v) 1 £120.00

49 4300006666 Transformer (110v/48v) 1 £27.50 49 4300001998 Transformer (400/230v/48v) 1 £29.00

50 4300008310 Mains contactor (48v) 1 £18.70 51 4300008311 Contactor bracket 1 £31.25

52 4300006653 Capacitor (110v) 1 £12.00 52 4300006659 Capacitor (230v) 1 £14.00

53 4300007454 Diode assembly 1 £1.95 54 4300008312 Voltage suppressor (400v) 1 £1.25 55 4300008313 Terminal block 1 £2.50

56 4300008314 Plug control cable 1 £1.75 57 4300008316 Plug power cable 1 £1.75

33

3

3

3

33

333

3

3

3

33

3

33

125 and 250kg Capacities






207

CPS 110, 230 & 400v ELECTRIC CHAIN HOISTS



208

SX5 STEERMAN LOAD MOVING SKATES


1 4300005648 Front frame 1 £283.33 2 4300005649 Handle c/w rubber grips 1 £79.53 3 4300005672 Rear trolley casting 2 £120.43 4 4300012841 Alignment bar 1 £19.03 5 4300002358 Rubber handle grips 2 £6.27 6 4300005653 Wheels (blue) 16 £14.73 7 4300005656 Turntable (black) 1 £60.43 8 4300005657 Turntable bolt 1 £6.69 9 4300005658 Turntable bearing 1 £41.87 10 4300005659 “R” clip (handle pin) 2 £0.67 11 4300005661 Axle shaft (rear) 4 £10.47 12 4300005664 Circlip 16 £0.27 13 4300005703 Axle shaft (front) 4 £12.75 14 4300005665 Anti-slip mat (front) 1 £10.62 15 4300005667 Anti-slip mat (rear) 2 £11.04





209



1 4300005669 Front frame 1 £338.35 2 4300005671 Front wheel box casting 2 £89.61 3 4300005672 Rear trolley casting 2 £109.39 4 4300012481 Alignment bar 1 £14.80 5 4300005673 Handle 1 £67.42 6 4300005674 Tow eye 1 £24.00 7 4300005675 Foot plate 1 £7.47 8 4300005704 Pivot shaft (handle) 1 £13.51 9 4300005676 Anti-tip roller 2 £10.00 10 4300005659 “R” clip (handle pin/pivot pin) 6 £0.67 11 4300002358 Rubber handle grip 2 £6.27 12 4300005677 Bolt (plated) 2 £0.60 13 4300005678 Nut (nyloc) 2 £0.20 14 4300005679 Wheel assembly (black) 16 £16.63 15 4300005681 Turntable (black) 1 £53.33 16 4300005682 Turntable bolt 1 £5.75 17 4300005683 Turntable bearing 1 £40.57 18 4300005661 Axle shaft (front & rear) 8 £10.47 19 4300005664 Circlip 16 £0.27 20 4300005684 Pivot pin 4 £14.00 21 4300005696 Anti-slip mat (front) 1 £10.62 22 4300005667 Anti-slip mat (rear) 2 £9.20





210



1 4300005685 Front frame 1 £339.10 2 4300005686 Front wheel box casting 2 £135.80 3 4300005687 Rear trolley casting 2 £164.60 4 4300005688 Handle 1 £76.36 5 4300005674 Tow eye 1 £24.00 6 4300005675 Foot plate 1 £7.47 7 4300005705 Pivot shaft (handle) 1 £15.20 8 4300005676 Anti-tip roller 2 £10.00 9 4300005659 “R” clip (handle pin/pivot pin) 6 £0.67 10 4300002358 Rubber handle grip 2 £6.27 11 4300005677 Bolt (plated) 2 £0.60 12 4300005678 Nut (nyloc) 2 £0.20 13 4300005653 Wheel assembly (blue) 32 £14.73 14 4300005681 Turntable (black) 1 £60.42 15 4300005682 Turntable bolt 1 £5.57 16 4300005683 Turntable bearing 1 £40.57 17 4300005689 Axle shaft (front & rear) 8 £11.80 18 4300005664 Circlip 16 £0.27 19 4300005684 Pivot pin 4 £14.00 20 4300005696 Anti-slip mat (front) 1 £10.62 21 4300005645 Anti-slip mat (rear) 2 £11.38 22 4300012842 Alignment bar 1 £19.56





211



1 4300005685 Front frame 1 £339.10 2 4300005686 Front wheel box casting 2 £135.80 3 4300005687 Rear trolley casting 2 £164.60 4 4300005688 Handle 1 £76.36 5 4300005674 Tow eye 1 £24.00 6 4300005675 Foot plate 1 £7.47 7 4300005705 Pivot shaft (handle) 1 £15.20 8 4300005676 Anti-tip roller 2 £10.00 9 4300005659 “R” clip (handle pin/pivot pin) 6 £0.67 10 4300002358 Rubber handle grip 2 £6.27 11 4300005677 Bolt (plated) 2 £0.60 12 4300005678 Nut (nyloc) 2 £0.20 13 4300005679 Wheel assembly (black) 32 £16.63 14 4300005681 Turntable (black) 1 £60.42 15 4300005682 Turntable bolt 1 £5.75 16 4300005683 Turntable bearing 1 £40.57 17 4300005689 Axle shaft (front & rear) 8 £11.80 18 4300005664 Circlip 16 £0.27 19 4300005684 Pivot pin 4 £14.00 20 4300005696 Anti-slip mat (front) 1 £10.62 21 4300005645 Anti-slip mat (rear) 2 £11.38 22 4300012842 Alignment bar 1 £19.56





212



1 4300005690 Front frame 1 £504.96 2 4300005691 Front wheel box casting 2 £154.91 3 4300005692 Rear trolley casting 2 £226.78 4 4300005693 Handle 1 £77.33 5 4300005674 Tow eye 1 £24.00 6 4300005675 Foot plate 1 £7.47 7 4300005706 Pivot shaft (handle) 1 £17.56 8 4300005676 Anti-tip roller 2 £10.00 9 4300005659 “R” clip (handle pin/pivot pin) 6 £0.67 10 4300002358 Rubber handle grip 2 £6.30 11 4300005677 Bolt (plated) 2 £0.60 12 4300005678 Nut (nyloc) 2 £0.20 13 4300005653 Wheel assembly (blue) 48 £14.73 14 4300005681 Turntable (black) 1 £60.42 15 4300005707 Turntable bolt 1 £6.35 16 4300005683 Turntable bearing 1 £38.10 17 4300005694 Axle shaft (front & rear) 8 £12.80 18 4300005664 Circlip 16 £0.27 19 4300005695 Pivot pin 4 £14.71 20 4300005696 Anti-slip mat (front) 1 £10.62 21 4300005698 Anti-slip mat (rear) 2 £11.60 22 4300012843 Alignment bar 1 £25.11





213



1 4300005690 Front frame 1 £504.96 2 4300005691 Front wheel box casting 2 £154.91 3 4300005692 Rear trolley casting 2 £226.78 4 4300005693 Handle 1 £77.33 5 4300005674 Tow eye 1 £24.00 6 4300005675 Foot plate 1 £7.47 7 4300005706 Pivot shaft (handle) 1 £17.56 8 4300005676 Anti-tip roller 2 £10.00 9 4300005659 “R” clip (handle pin/pivot pin) 6 £0.67 10 4300002358 Rubber handle grip 2 £6.30 11 4300005677 Bolt (plated) 2 £0.60 12 4300005678 Nut (nyloc) 2 £0.20 13 4300005679 Wheel assembly (black) 48 £16.63 14 4300005681 Turntable (black) 1 £60.42 15 4300005707 Turntable bolt 1 £6.35 16 4300005683 Turntable bearing 1 £38.10 17 4300005694 Axle shaft (front & rear) 8 £12.80 18 4300005664 Circlip 16 £0.27 19 4300005695 Pivot pin 4 £14.71 20 4300005696 Anti-slip mat (front) 1 £10.62 21 4300005698 Anti-slip mat (rear) 2 £11.60 22 4300012843 Alignment bar 1 £25.11





214

S40 STEERMAN LOAD MOVING SKATES


1 4300005708 Front frame 1 £1607.69

2 4300005709 Front wheel box casting 2 £503.09

3 4300005710 Rear trolley casting 2 £770.70

4 4300005711 Handle 1 £260.00

5 4300005712 Tow eye 1 £33.16

6 4300005713 Rubber bump stop 1 £5.56

7 4300005714 Pivot shaft (handle) 1 £34.13

8 4300005715 Pivot pin (handle) 2 £15.69

9 4300005716 “R” clip (handle pin/pivot pin) 6 £1.07

10 4300002358 Rubber handle grip 2 £6.30

11 4300005747 Lynch pin (tow eye retention) 1 £1.40

12 4300005717 Wheel assembly (blue) 48 £26.00

13 4300005718 Turntable (black) 1 £185.41

14 4300005720 Turntable bolt 1 £15.92

15 4300005721 Turntable bearing 1 £450.97

16 4300005722 Axle shaft (front & rear) 8 £20.03

17 4300005723 Circlip 16 £0.44

18 4300005724 Pivot pin 4 £18.59

19 4300013832 Alignment bar 1 £51.42





215



1 4300005708 Front frame 1 £1607.69



4 4300005711 Handle 1 £260.00

5 4300005712 Tow eye 1 £33.16

6 4300005713 Rubber bump stop 1 £5.56


8 4300005715 Pivot pin (handle) 2 £15.69




12 4300005726 Wheel assembly (black) 48 £33.33

13 4300005718 Turntable (black) 1 £185.41

14 4300005720 Turntable bolt 1 £15.92



17 4300005723 Circlip 16 £0.44

18 4300005724 Pivot pin 4 £18.59

19 4300013832 Alignment bar 1 £51.42





216



1 4300005728 Front frame 1 £1919.93



4 4300005731 Handle 1 £533.30

5 4300005732 Tow eye 1 £33.16

6 4300005713 Rubber bump stop 1 £5.56


8 4300005736 Pivot pin (handle) 2 £20.36




12 4300005727 Wheel assembly (blue) 48 £38.85

13 4300005740 Turntable (black) 1 £201.17

14 4300005741 Turntable bolt 1 £6.72



17 4300005743 Circlip 16 £0.44

18 4300005744 Pivot pin 4 £24.84

19 4300005745 Alignment bar 1 £74.89





217



1 4300005728 Front frame 1 £1919.93



4 4300005731 Handle 1 £533.30

5 4300005732 Tow eye 1 £33.16

6 4300005713 Rubber bump stop 1 £5.56


8 4300005736 Pivot pin (handle) 2 £26.36




12 4300005738 Wheel assembly (black) 48 £38.85

13 4300005740 Turntable (black) 1 £201.17

14 4300005741 Turntable bolt 1 £6.81



17 4300005743 Circlip 16 £0.44

18 4300005744 Pivot pin 4 £24.84

19 4300005745 Alignment bar 1 £74.89





218

92 SERIES VERTICAL PLATE LIFTING CLAMPS

Item Description 92-500 92-1500 92-2000 92-3000

10 Shell plates (set of 4) 4300001206 4300001258 4300001265 4300001272 £20.00 £20.50 £50.00 £54.00 16 Shell pins (set of 3*) 4300001242 4300001263 4300001270 4300001274 £11.00 £16.50 £16.50 £19.50 17 Shell screws (6 off) 4300001241 4300001264 4300004776 4300001275 £11.00 £11.00 £12.00 £12.00 20 Internal assembly 4300001207 4300001259 4300001266 4300001266 £26.00 £30.00 £44.00 £44.00 27 Spring 4300001990 59210362 4300001073 4300001073 £6.50 £6.50 £7.00 £7.00 30 Hook ring assembly 4300001221 4300001261 4300001267 4300001273 £21.50 £26.50 £43.00 £43.00 31 Hook ring 4300004779 4300008076 4300008079 4300008082 £15.00 £20.00 £39.00 £39.00

32 Hook ring pin 4300003571 4300003315 4300004837 4300004837 £6.50 £6.50 £8.50 £8.50

40 Cam assembly - 4300001260 4300001049 4300001268 £23.00 £32.00 £32.00

41 Cam - 4300008077 4300008080 4300008080 £16.00 £22.00 £22.00

47 Locking lever and pin - 4300008078 4300008081 4300008081 £10.00 £12.00 £12.00

50 Pad assembly 4300001222 4300001262 4300001022 4300001269 £17.00 £18.00 £23.00 £25.00

60** Jaw bolt assembly 4300001992 - - - £6.25

*Set of 2 on 92-500 **Not shown in exploded diagram

17

27

2016

1047

50

32

10

4140

No specialist tools are required to repair clamps. Heatmay be required to release the bonding compound onsome screws.

After repair use STUDLOCK on all screws removed.

Always quote clamp serial number, part description andmodel when ordering spares.

“Only use genuine Camlok lifting clamp spare parts!”

31

30





Item Description CZ1 CZ2 CZ3 CZ4 CZ6

10 Shell welded assembly 4300001291 4300001298 4300001303 4300001425 4300008403 £81.00 £90.00 £120.00 £150.00 £170.00 20 Internal assembly 4300001292 59110320 59110320 59110320 4300001439 £58.00 £91.00 £91.00 £104.00 £104.00 21 Internal links (2 off) 4300008323 4300008330 4300008330 4300008330 4300008396 £15.50 £25.00 £25.00 £70.00 £70.00 25 Internal pin 4300008322 4300008329 4300008329 4300008329 4300008395 £7.00 £9.00 £9.00 £15.00 £15.00 27 Spring 59000345 59110107 59110107 59110107 59210318 £7.00 £8.00 £8.00 £10.00 £10.00 28 Jaw 4300001293 59110318 59110318 59110318 4300001442 £41.00 £60.00 £60.00 £70.00 £70.00 30 Hook ring assembly 4300001295 4300001301 4300001304 4300001449 59110142 £28.00 £38.00 £44.00 £65.00 £70.00 31 Hook ring 4300008319 4300008419 4300008331 4300002099 4300008445 £19.00 £36.00 £36.00 £65.00 £70.00 32 Hook ring pin 4300008320 4300004399 4300004399 4300004399 4300008397 £6.00 £8.00 £8.00 £9.00 £9.00 40 Cam assembly and lever 4300002063 4300001049 4300001049 4300001049 59110143 £23.00 £32.00 £32.00 £45.00 £45.00

41 Cam - 4300008080 4300008080 - - £22.00 £22.00

47 Lever 4300008321 4300008081 4300008081 4300008081 4300008398 £12.00 £12.00 £12.00 £15.00 £15.00

50 Pad assembly 59000346 59110315 59110315 59110315 59110144 £25.00 £32.00 £32.00 £35.00 £35.00

60 Jaw bolt assembly 59000347 59110136 59110136 59110136 4300001464 £11.00 £12.00 £12.00 £17.00 £17.00

219

27

2010

6047

50

32

31

4140

CZ VERTICAL PLATE LIFTING CLAMPS



Always quote clamp serial number, part description andmodel when ordering spares.


30

21

28

25





Item Description CY1 CY2 CY3

10 Shell plates (set of 4) 4300001276 4300001283 4300001285 £74.00 £120.00 £120.00 16 Shell pins (2) each 4300001263 4300001274 4300001274 £16.50 £19.50 £19.50 17 Shell screws (set of 4) 4300008258 4300008317 4300008317 £7.00 £8.00 £8.00 20 Internal assembly 4300001277 4300001284 4300001284 £30.00 £45.00 £45.00 27 Spring 4300001071 4300001073 4300001073 £6.50 £7.00 £7.00 32 Hook ring pin 4300003315 4300004837 4300004837 £6.50 £8.50 £8.50

34 Hook ring fork 4300001280 4300001289 4300001289 £40.00 £46.00 £46.00

35 Swivel hook ring 4300001281 4300001287 4300001287 £25.00 £33.00 £33.00

37 Eye bolt and nut 4300001282 4300001290 4300001290 £12.00 £30.00 £30.00

40 Cam assembly 4300001278 4300001288 4300001288 £27.00 £34.00 £34.00

41 Cam 4300008077 4300008080 4300008080 £16.00 £22.00 £22.00

47 Locking Lever and pin 4300008315 4300008318 4300008318 £9.00 £11.00 £11.00

50 Pad assembly 4300001262 4300001269 4300001269 £18.00 £25.00 £25.00

60 Jaw bolt assembly 4300001279 4300001286 4300001286 £14.00 £12.00 £12.00

220

35

17

10

6047

41

16

37

50

32

34

40

CY ‘HINGED’ VERTICAL PLATE LIFTING CLAMPS



Always quote clamp serial number, part descriptionand model when ordering spares.


27

20





Item Description CX1500 CX3000 CX6000

10 Shell welded assembly 4300001288 4300001707 4300001790 £59.00 £95.00 £440.00 20 Internal assembly 4300001292 59110320 4300001439 £58.00 £91.00 £104.00 21 Internal links (2 off) 4300008323 4300008330 4300008396 £15.50 £25.00 £70.00 25 Internal pin 4300008322 4300008329 4300008395 £7.00 £9.00 £15.00 27 Spring 59000345 59110107 59210318 £7.00 £8.00 £10.00 28 Jaw 4300001293 4300001300 59210317 £41.00 £60.00 £70.00 32 Fork pin 4300008320 4300004399 4300008459 £6.00 £8.00 £25.00 34 Fork 4300001704 4300001692 4300008457 £36.00 £43.00 £46.00

35 Eye cam 4300001693 4300001758 4300001850 £23.00 £30.00 £55.00

37 Pivot bolt and nut 4300004819 4300001841 4300008460 £8.00 £10.00 £17.00

40 Cam ass. and locking lever 4300001691 4300001723 59210315 £25.00 £33.00 £45.00

47 Locking Lever 4300008455 4300008456 4300001814 £9.00 £10.00 £18.00

50 Pad assembly 59000346 59110315 59210334 £25.00 £35.00 £35.00

60 Jaw bolt assembly 59000347 59110136 4300008458 £11.00 £12.00 £16.00

71** Master link 4300008508 4300008515 4300008581 £22.00 £30.00 £67.00

72** Connecting link 4300008509 4300008516 4300008582 £14.00 £35.00 £67.00

**Not shown in exploded diagram

CX ‘HINGED’ VERTICAL PLATE LIFTING CLAMPS



Always quote clamp serial number, part descriptionand model when ordering spares.


35

10

27

216047

41

37

50 32

34

40

221

20

28 25





PALLET TRUCK SPARESPFAFF SILVERLINE HAND PALLET TRUCK - MODEL 034527101

HANDLE ASSEMBLY


- 040006609 Handle ass. (complete) 1 £72.06

100 34527100502 Tie rod ass. (complete): 1 £18.50 101-104, 121 and 122

105 34527100105 Tie bar bolt 2 £12.58

106 34527100106 Pin 2 £2.90

107 34527100107 Bush for handle 2 £2.90

108 34527100108 Roller bolt 1 £5.44

109 34527100109 Steel roller 1 £5.44

109A 34527100090 Bush for steel roller 1 £2.90

111 34527100111 Rubber stopper 1 £2.90

112 34527100112 Roll pin 1 £2.90

113 34527100113 Leaf spring 1 £2.90

114 34527100114 Return spring 1 £2.90

115 34527100115 Roll pin 1 £2.90

116 34527100116 Roll pin 1 £2.90

117 34527100117 Control lever 1 £8.40

118 34527100118 Steel roller 1 £2.90

119 34527100119 Roll pin 1 £2.90

PUMP ASSEMBLY


- 040006619 Hydraulic pump (compete) 1 £207.83

301 34527100301 Spring guide 1 £11.80

302 34527100302 Return spring 1 £9.47

303 34527100303 Piston 1 £14.44

304 34527100304 Stripper 1 £2.90

305 34527100305 Piston seal 1 £4.50

306 34527100306 Wheel hub cover 2 £2.90

307 34527100307 Circlip 2 £2.90

308 34527100308 Washer 2 £2.90

310 34527140010 Rubber steering wheel 2 £39.14

310 34527100410 Nylon steering wheel 2 £35.15

310 34527100310 Poly. steering wheel (std) 2 £42.94

311 34527100311 Dowel pin 1 £2.90

312 34527100312 Dowel pin 2 £2.90

H313 040006618 Pressure plate 1 £43.73

314 34527100314 Circlip 1 £2.90

315 34527100315 Thrust bearing 1 £23.43

316 34527100316 Steering wheel axle 1 £15.10

316 34527140316 Steering wheel axle (rubber) 1 £23.43

317 34527100317 Nut 1 £2.90

318 34527100318 Adjustment screw 1 £2.90

319 34527100319 Lever 1 £6.16

320 34527100320 Dowel pin 1 £2.90

321 34527100321 Drain valve 1 £33.58

H322 040006620 Pump housing - casting only 1 £175.04

324 34527100324 Filler screw 1 £2.90

325 see item 500 Sleeve 1 -

326 see item 500 O-ring 1 -

327 see item 500 Stripper 1 -

H328 040006621 Piston 1 £33.22

H329 see item 400 Washer 1 -

300 040006623 Pressure relief valve 1 £21.99

335 34527100335 Grease nipple 1 £2.90

336 34527100336 Cylinder 1 £2.90

337 34527100337 Bearing cover 1 £6.04

H338 see item 400 Circlip 1 -

H339 see item 400 Bearing 1 -

H340 040006630 Cylinder tube guide 1 £21.66

H341 see item 500 O-ring 1 -

H342 040006632 Bar stop 1 £6.04

H343 040006633 Screws 2 £2.90

400 34527100400 Piston bearing sets: H329, 1 £27.06 H240-242, and H338-339

500 040006625 Seal kit: 325-327 and H341 1 £27.18

MAIN CHASSIS (continued)


236 34527100243 Washer 2 £2.90 237 34527100242 Grease nipple 1 £2.90 238 34527100240 Grease nipple 1 £2.90 239 34527100241 Bush 4 £2.90H240/2 34527100400 Piston bearing set 1 £34.79

MAIN CHASSIS


H201 040006611 Fork chassis fork 1150mm 1 £218.76 203 34527100203 Main chassis bracket 1 £63.99 204 34527100204 Bush main chassis bracket 2 £2.90 205 34527100205 Shaft 2 £2.90 206 34527100206 Bush for shaft 2 £2.90 207 34527100207 Bush 2 £2.90 208 34527100208 Circlip 2 £2.90 H209 040006612 Clevis for for tine adj. rod 2 £10.25 210 34527100210 Shaft 2 £2.90 H211 040006613 Lock nut for tine adj. rod 2 £4.12 H212 040006614 Tine adjustment rod 2 £41.47 213 34527100213 Circlip 2 £2.90 214 34527100214 Shaft main chassis bracket 1 £18.79 215 34527100215 Bush 4 £2.90 216 34527100216 Shaft 2 £2.90 217 34527100217 Bearing 4 £2.90 218 34527100218 Auxiliary sheave 2 £9.78 219 34527100219 Roll pin 2 £2.90 220 34527140220 Roll pin 4 £2.90 221 34527100221 Axle shaft 2 £5.90 222 34527100222 Wheel fork 2 £37.59 223 34527100424 Axle shaft 4** £5.90 224 34527100428 Tandem frame side plate 4 £7.92 225 34527100225 Washer 8**/4* £2.90 227 34527100227 Nylon roller with bearing 4** £28.27 227 34527100027 Tandem poly. roller (std) 4** £28.27 230 34527100230 Roll pin 8**/2* £2.90 231 34527100231 Axle bolt - pallet entry roller 2 £2.90 232 34527100232 Pallet entry roller 2 £9.78 233 34527100233 Nyloc nut 2 £2.90 234 34527100234 Single polyurethane roller 2* £39.32 234 34527100034 Nylon roller with bearing 2* £39.32 235 34527100235 Axle shaft 2* £4.97

*Single roller **Tandem roller

222





223

PALLET TRUCK SPARESPFAFF SILVERLINE HAND PALLET TRUCK - MODEL 034527101

SINGLE TYPE

TANDEM TYPE

235 230225 226

234 226 225 233

232 231233

232231

225226

227226

225

230

223224

223

217

222

217239

218215

215

226

217

218

220

221

220

219

239220

220221

H201

H240

H241

H242

213

237203204

236

238205 206

207

206205

238 207

204213

208H209

210H211

H212

214

236

314

312

335

H313

312315

337

311

320

310

307308

309

303

301302

304305

H341H343

H342H340

H339 H338

336

H329

H328

327

326

325

323

324

H322

321

316

309

310309

308307

306

H333H334

317

318319

222

239

306

H332H331H330

300

107

109A

109

108106 105

107

100

119

116

117

118

113

114

115

112

111

HANDLE

FRAME

PUMP





224

SILVERLINE HAND CHAIN HOISTS

Item Description 500kg 1000kg 2000kg 3000kg

Article no. Price £ Article no. Price £ Article no. Price £ Article no. Price £

1 Gear cover 30867050001 £16.99 30867052001 £18.69 30867056001 £25.48 30867054001 £28.27

2 Pin 30867050002 £3.40 30867050002 £3.40 30867054002 £3.40 30867054002 £3.40

3 Chain anchor 30867050003 £3.40 30867050003 £3.40 30867054003 £3.40 30867054003 £3.40

4 Bolt 30867050004 £3.40 30867052004 £3.40 30867054004 £3.40 30867058004 £3.40

5 Load chain (p/mtr) 04307635 £11.00 04307635 £11.00 04307642 £14.00 04307642 £14.00

6 Stripper 30867050006 £3.40 30867050006 £3.40 30867056006 £3.40 30867056006 £3.40

7 Bottom hook ass. 30867050007 £20.38 30867052007 £20.38 30867056007 £40.77 30867058007 £61.15

8 Safety latch kit 30867050008 £3.40 30867052008 £3.40 30867056008 £6.79 30867058008 £6.79

9 Bearing with item 10 - with item 10 - with item 10 - with item 10 -

10 Left side plate 30867050010 £16.99 30867052010 £16.99 30867056010 £25.48 30867054010 £28.94

11 Spacer shaft 30867050011 £3.40 30867052011 £3.40 30867054011 £3.40 30867054011 £3.40

12 Disk hub 30867050012 £6.79 30867052012 £6.79 30867054012 £8.49 30867054012 £8.49

13 Hook pin 30867050013 £3.40 30867052013 £3.40 30867054013 £3.40 30867054013 £3.40

14 Hand chain 4300011028 £5.00 4300011028 £5.00 4300011028 £5.00 4300011028 £5.00

15 Disc gear 30867050015 £19.03 30867052015 £23.25 30867056015 £38.05 30867054015 £35.67

16 Drive shaft gear 30867050016 £20.38 30867052016 £23.78 30867054016 £25.48 30867054016 £25.48

17 Gear wheel 30867050017 £15.29 30867052017 £18.69 30867056017 £22.08 30867054017 £22.08

18 Steel bushing with item 10 - with item 10 - with item 10 - with item 10 -

19 Right side plate 30867050019 £16.99 30867052019 £16.99 30867056019 £25.48 30867054019 £28.27

20 Chain guide 30867050020 £6.79 30867050020 £8.49 30867054020 £11.89 30867054020 £15.22

21 Roller with item 10 - with item 10 - with item 10 - with item 10 -

22 Load sheave 30867050022 £25.48 30867050022 £25.48 30867054022 £32.28 30867054022 £32.28

23 Top hook ass. 30867050023 £22.08 30867052023 £25.48 30867056023 £37.37 30867058023 £52.66

24 Pawl spring 30867050024 £3.40 30867050024 £3.40 30867054024 £6.79 30867054024 £6.79

25 Pawl 30867050025 £3.40 30867050025 £3.40 30867054025 £5.10 30867054025 £5.10

26 Locking ring 30867050026 £3.40 30867050026 £3.40 30867058026 £3.40 30867058026 £3.40

27 Ratchet disc 30867050027 £10.19 30867052027 £10.19 30867054027 £11.89 30867054027 £11.89

28 Friction disc 30867050028 £3.40 30867052028 £3.40 30867054028 £5.10 30867054028 £5.10

29 Brake cover 30867050029 £5.10 30867052029 £5.10 30867056029 £8.49 30867054029 £6.79

30 Hand wheel 30867050030 £10.19 30867052030 £10.19 30867056030 £15.29 30867054030 £11.89

31 Split pin 30867050031 £3.40 30867050031 £3.40 30867054031 £3.40 30867054031 £3.40

32 Hand wheel cover 30867050032 £10.19 30867052032 £15.29 30867056032 £18.69 30867054032 £18.69

49 Castle nut 30867050049 £8.49 30867050049 £8.49 30867050049 £8.49 30867050049 £8.49

52 Hexagon nut - - - - - - - -



225

SILVERLINE HAND CHAIN HOISTS

23

7

500, 1000, 2000 & 3000kg

Top Hook (3ton only)

Bottom Hook (3ton only)



226

SILVERLINE RATCHET LEVER HOISTS



Item Description 750kg 1500kg 3000kg 6000kg

Article no. Article no. Article no. Article no.

1 Gear case assembly 030834052001 030834053001 030834054001 030834054001

2 Drive shaft gear 030834052002 030834053002 030834054002 030834054002

3 Chain guiding bracket 030834052003 030834053003 030834054003 030834054003

4 Lever side plate assembly 030834052004 030834053004 030834054004 030834054004

5 Top hook assembly 030834052005 030834053005 030834054005 -

6 Load sheave assembly 030834052006 030834053006 030834054006 030834054006

7 Hook shaft 030834052007 030834053007 030834054007 030834054007

8 Disc hub 030834052008 030834053008 030834054008 030834054008

9 Pawl spring 030834052009 030834053009 030834053009 030834053009

10 Pawl 030834052010 030834053010 030834053010 030834053010

11 Wire snap ring 030834052011 030834052011 030834052011 030834052011

12 Brake hub 030834052012 030834053012 030834054012 030834054012

13 Brake case 14 14 14 14

14 Inner lever handle assembly 030834052013 030834053013 030834054013 030834054013

15 Change over gear 030834052015 030834053015 030834053015 030834053015

16 Outer lever handle assembly 030834052016 030834053016 030834053016 030834053016

17 Bushing 030834052017 030834053017 030834054017 030834054017

18 Screw 030834052018 030834053018 030834053018 030834053018

19 Hand wheel 030834052019 030834053019 030834053019 030834053019

20 Hexagon slotted nut 030834052020 030834052020 030834052020 030834052020

21 Split pin 030834052021 030834052021 030834052021 030834052021

22 Pawl 030834052022 030834053022 030834053022 030834053022

23 Spring 030834052023 030834053023 030834053023 030834053023

24 Spring seat 030834052024 030834053024 030834053024 030834053024

25 Nut 030834052025 030834053025 030834054025 030834054025

26 Disc gear assembly 030834052026 030834053026 030834054026 030834054026

27 Gear wheel 030834052027 030834053027 030834054027 030834054027

28 Gear side cover assembly 030834052028 030834053028 030834054028 030834054028

29 Stripper assembly 030834052029 030834053029 030834054029 030834054029

30 Chain ring 030834052030 030834053030 030834054030 030834054030

31 Load chain 033800040 033803034 03380042 03380042

32 Bolt 030834052032 030834053032 030834054032 -

33 Bottom hook assembly 030834052033 030834053033 030834054033 -

34 Nut 030834052034 030834053034 030834054034 -

35 Nut 030834052035 030834053035 030834053035 030834053035

36 Handle grip 030834052036 030834053036 030834053036 030834053036

37 Friction disc 030834052037 030834053037 030834054037 030834054037

38 Ratchet disc 030834052038 030834053038 030834054038 030834054038

39a Top hook assembly - - - 030834055100

39b Bottom hook assembly - - - 030834055200

52 Safety latch spring 030834052052 030834053052 030834054052 030834053052

53 Safety latch assembly 030834052053 030834053053 030834054053 030834055053



227

SILVERLINE RATCHET LEVER HOISTS

750, 1500, 3000 & 6000kg

Top Hook (6ton only)

Bottom Hook (6ton only)



Item Quantity Description Article number Price (£)

1 1 Winch housing complete 030120448 £47.02

2 1 Wire rope drum complete 030120507 £82.23

3 1 Drum axle 039413057 £13.77

4 2 Washer 031010689 £2.90

5 2 Circlip 031040235 £2.90

6 2 Hexagon socket set screw 031014501 £2.90

8 1 Driving pinion 039005528 £64.69

9 1 Sliding bearing 039159055 £40.92

10 4 Hexagon socket head cap screws 031014488 £2.90

11 1 Bound disc 039070239 £17.00

12 1 Spiral pin 031051073 £2.90

13 2 Friction disc 031410994 £6.79

14 1 Ratchet wheel 030090889 £4.89

15 1 Crank hub 039244173 £40.65

16 1 Medium washer 031104479 £2.90

17 1 Prevailing torque type hex. domed cap nut 031015001 £2.90

18 1 Crank complete 040005313 £39.95

19 2 Hexagon socket head cap 031014488 £2.90

21 1 safety-catch pawl 030070289 £12.38

22 1 retaining ring for shaft 031040812 £2.90

24 1 Name plate - P.O.A.

LB WIRE ROPE WINCH

“Only use genuine Pfaff-silberblau spare parts!”

PFAFF LB 650 WIRE ROPE WINCH



228



229

CHAIN AND ACCESSORIES

Chain size Chain No. of O x pitch weight falls of

mm kgs/mtr chain Handy D85 AL PT VS/T CPV CPE UNO CPS Yalelift

Hoist models and capacities in kgs

4 x 12

4 x 12.2

5 x 15.1

5 x 15.1

5.6 x 17.1

6 x 18

6 x 18.5

6.3 x 18.9

6.3 x 19.1

7.1 x 21.2

7.1 x 20.5

7.9 x 21.7

8 x 24

9 x 27

9 x 27.2

10 x 30

10 x 30

10 x 30.2

11 x 31

11 x 31

0.35

0.4

0.56

0.56

0.68

0.8

0.82

0.85

0.86

1.1

1.1

1.3

1.4

1.8

1.9

2.2

2.2

2.3

2.7

2.7

1 - 250 - - - - - - - - - - - 1 - 500 - - - - - - - - - - - 1 - - - - - - 125 - - - - - - 1 - - - - - - 250 - - - - - - 2 - - - - - - 500 - - - - - -

1 - - - - - - - - - - 500 - -

1 - - - - - - 500 - - - - - - 2 - - - - - - 1000 - - - - - -

1 - - - - 800 - - - - - - - -

1 - - - - - 500 - - 750 - - 500 750 1 - - - - - 1000 - - - - 1000 1000 - 2 - - - - - 2000 - - - - - - -

1 - - 750 - - - - - - - - - -

1 250-C - - - - - - - - - - - - 1 500-F - - - - - - - - - - - - 1 - - - 750 - - - - - - - - - 2 - - - 1000 - - - - - - - - -

1 - - - 1500 1600 - - - - - - - -

1 - - - - - - 1000 - - - - - - 2 - - - - - - 2000 - - - - - -

1 500-J - - - - - - - - - - - - 1 1000-L - - - - - - - - - - - - 2 2000-R - - - - - - - - - - - - 3 3000-RT - - - - - - - - - - - -

1 - - - - - 2000 - - 1500 - 2000 1500 1500 1 - - - - - - - - - - - 2000 - 2 - - - - - 3000 - - - - - 3000 -

1 - - 1500 - - - - - - - - - -

1 - - - - 3200 - - - - - - - - 2 - - - - 6300 - - - - - - - -

1 - - - - - 3000 - - 3000 - 3000 - 3000 2 - - - - - 5000 - - 6000 - 5000 5000 6000 4 - - - - - 10000 - - - - - 10000 - 8 - - - - - 20000 - - - - - - -

3 - - - - - - - - - - 10000 - - 6 - - - - - - - - - - 20000 - - 1 - - - 3000 - - - - - - - - - 1 - - 3000 - - - - - - - - - - 2 - - 6000 - - - - - - - - - - 3 - - 10000 - - - - - - - - - - 1 - - - - - - - 1600 - - - - - 1 - - - - - - - 2000 - - - - - 1 - - - - - - - 2500 - - - - - 1 - - - - - - - 3000 - - - - - 2 - - - - - - - 3200 - - - - - 2 - - - - - - - 4000 - - - - - 2 - - - - - - - 5000 - - - - -

Article no.

£ per metre

To suit all VS, Yalelift & HTG Type: Zinc Plated Article no.: 04307654 Chain size: 5 x 26 mm Price per metre £5

To suit all Silverline chain hoist Type: Zinc Plated Article no.: 4300011028 Chain size: 5 x 25.2 mm Price per metre £5

To suit all VS, Yalelift & HTG Type: Stainless Steel Article no.: 04307655 Chain size: 5 x 26 mm Price per metre £24

02100004£9

07600001£11

04300008£11

06900001£18

02109357£11

04307635£11

01607633£11

4300006914£16

02107637£13

02107639£14

06900002£26

4300006916£19

04307642£14

01607645£16

02109358£19

04307647£20

04300013£25

02107649£19

01607652£23

06109488£42

Chain size Article no. Finish Capacity kgs Price per metre £

5/8” x 3/8” 01244800 Black finish only £21 1” x 1/2” 01245700 Black finish only £30 11/4” x 5/8” 01245701 Black finish only £55

ZINC PLATED LOAD CHAINS

LINK HAND CHAIN

ROLLER CHAIN FOR C85 PUL-LIFTS

5 x 15.1mm Stainless Steel Load Chain for Yalelift 500kg is available at £50 per mtr (07218304).6 x 18mm Stainless Steel Load Chain for VS+ and Yalelift 1000kg is available at £52 per mtr (04307636).8 x 24mm Stainless Steel Load Chain for VS+ and Yalelift 2000kg is available at £65 per mtr (04307643).*

750

1500

30006000 10000

Lodestar(Frame)

SilverlineHCB

SilverlineRLH





230

INDEX

Article Page

AActuators 98-99Air hoists 28-29Aluminium jacks 141Aluminium hand winches 72Aluminium lever hoists 11Atex hoists & trolleys 16-17

BBeam clamps 110-111Beam trolleys 20Big bag lifters 130 Block grabs 124-125Board clamps 117Bottle jacks 141Bulb section lifting clamps 111-113Bulb bar anchors 111

CC-hooks 126Cable drum lifting lugs 127Cable grips 21Cable pullers 21Camlok spare parts 218-221Carriage charges 231Catenary systems 36Caterpillar skates 138Chain hoists (manual) 12-19Chain hoists (electric) 30-37Claw jacks 140-141Coil grabs 125Combination hoist & trolleys 14-19Concrete pipe lifting clamps 118Conditions of sales 231Contact details 3Container lifting lugs 128Corrosion resistant manual hoists 13-15Crane forks 121Crane weighers 44-45

DDistributor network 4Drop test clamps 109Drum clamps 122-123Duff-Norton 98-99

EElectric chain hoists (units) 30-37Electric chain hoists (spares) 198-207Electric pallet trucks 86-87Electric travel trollies 37Electric wire rope winches 26 & 76 Endless winches 40-41Engine cranes 142Entertainment manual hoists 15Explosion proof hoists & trolleys 16-17

FFall arrest blocks & lanyards 48-56Festoon systems 34Flat webbing slings 58Folding engine cranes 142Fork lift truck jacks 140

Article Page

GGantries 132Gear travel trolleys 20Girder clamps 110 & 112Girder trolleys 20

HHand chain hoists 12-15Hand grip clamp 117Hand pallet trucks and stackers 82-90Hand winches 69-75Height safety products 48-56Hinged vertical plate clamps 102High grip plate clamps 103Hi-lift all cast jacks 68Horizontal plate clamps 104-106Hydraulic claw jacks 140-141Hydraulic cylinders and pumps 60-69Hydraulic test rigs 68

IIntegral manual hoists and trolleys 14-19Inverted manual hoists 15

JJib cranes 38-39

LLanyards 50Lever hoists 10-11Lifting magnets 116Lifting lugs 128Linear actuators 99Load binders 21Load indicators 46-47Low headroom hoists 14 & 19

MMachine lifting jacks 140Magnetic claw 117Magnets 116Manual chain hoists 12-19Multi rail clamps 115

NNon-marking plate clamps 108-109

PPaper reel head clamp 129Pallet truck spare parts 222-223Pedestrian stackers 89-90Permanent lifting magnets 116Pile pitching clamps 119Pile pulling clamps 119Pinch bars 138Pipe hooks 119Pneumatic chain hoists 28-29Pneumatic wire rope winches 27Powered hoists 28-37Powered pallet trucks 86-87Profile steel grabs 125Pul-lifts 10Push travel trolleys 120

QQuality & Safety 4

Article Page

RRadio remote controls 36Rail clamps 114-115Ratchet cranks 97Ratchet lashings 57Ratchet lever hoists 10-11Reinforced beam clamps 110Returns policy 5Roller pinch bars 138Rotary unions 99Round slings 58Round stock grabs 124

SSafety cages 131Safety ratchet cranks 97Scaffold hooks 27Scissor lift trolleys 91Screw clamps 120Screw jacks 98-99Sheaves and sheave blocks 77-79Shearlegs 131Single rail clamps 114Skates 136-139Sluice gate jacks 96Spare parts 143-229Spark resistant hoists & trolleys 16-17Spreader beams 132Spring balancers 24-25Steel jacks 92-93Steerman skates (units) 136-137Steerman skates (spare parts) 208-217

TTank skates 138Terms and conditions 231Test rig 68Tine hooks 130Thin sheet plate clamps 106Toe jacks 140Tool balancers 24-25Training school 5Tripods (height safety) 54Trolley lifts 90Trolleys 20 & 37Turning hooks 127Twin jaw plate clamps 103

UUltra low headroom hoists 14, 18 & 19Universal jib cranes 38-39

VVertical plate clamps 100-103

WWall mounted rack & pinion jacks 94-95Wall mounted winches 73Weighing pallet truck 84Webbing slings 58Weld on hooks 21Wide jaw clamps 107Wire rope hoists 42-43Winches (electric) 26 & 76Winches (manual) 69-75Workshop engine cranes 142



CARRIAGE CHARGES

CONDITIONS OF SALE

Standard delivery (normally next day before 17:30pm) £14.50 42p £80 Next working day BEFORE noon £24.50 49p P.O.A. Next working day BEFORE 10:30am £29.50 65p P.O.A.

Saturday delivery Prices on request Isle of Wight Prices on request Aberdeen & Scottish Highlands (AB, IV, KW, PA & PH) Prices on request Northern Ireland Prices on request

Delivery to a single destination within mainland UK 1 - 20 kilos 20 - 100 kilos 101 - 250 kilos (Excluding Scottish Highlands, see below) per consignment add per kilo on a single pallet

Although every effort is made to deliver your goods within the specified time, we cannot guarantee or be held responsible for deliveriesbeing late or lost. Whilst we endeavour to offer ‘next day’ delivery on all items, please check with the sales team at time of order andspecify your required date on your purchase order. Any orders placed stating ASAP or URGENT will normally go through on a 3-5 day

Before signing delivery document. If upon delivery of consignment any item is damaged, not of correct quantity or does not comply with thedescription, please endorse the delivery document accordingly. Additionally, you must advise in writing both, the carrier and our offices within 3working days. Regrettably, we can consider claims only if the above conditions are met.

• PLEASE NOTE THAT DUE TO THE LACK OF TRACEABILITY WE DO NOT SEND ANY ORDERS BY POST.

Columbus McKinnon Corporation Limited (hereafter called "The Company") draws attention to the following terms and conditions, which shall apply to all orders accepted and supplies made to the exclusion of any other terms andconditions whatsoever.

1. DELIVERY. Any delivery date given shall be subject to confirmation or revision by the Company at the time of acceptance of an order. The Company will then employ all reasonable means to make delivery within the time stated, but cannot accept any liability whatsoever for any loss or damage arising out of or in connection with late delivery or non-fulfilment of contract. The company shall be entitled to defer delivery until any monies due from buyer has been received. The company shall also be entitled to make partial deliveries by installments and each installment shall constitute a separate agreement. Should delivery be delayed by the buyer's instructions or lack of instructions or by any cause whatsoever beyond the Company’s reasonable control including strikes, lock-out labour disputes, war, act of God, embargo, government regulations, fire, flood, accident, shortage of or delay in obtaining materials or any other causes of similar character then a reasonable extension of time shall be granted.

2. PRICE. All prices quoted are exclusive of carriage, which will be charged separately unless otherwise stated and those ruling at the date of this quotation and subject to V.A.T. Any orders accepted by the Company shall be invoiced and paid for at the Company's prices ruling at the date of dispatch.

3. ACCEPTANCE OF ORDERS. Any quotation and acceptance thereof shall not constitute a contract to supply. The contract between the Company and the buyer shall only be formed when the buyer's order is formally accepted in writing by the Company.

4. ADDITIONS / MODIFICATIONS. No additions or modifications to these conditions of sale shall be deemed to have been accepted by the Company or form any part of any contract between the Company and the buyer unless the Company has first agreed in writing to such additions or modifications.

5. IMPROVEMENTS AND CHANGES. The Company reserves the right to make improvements or changes in the engineering specification of any goods without first referring to the buyer.

6. CANCELLATION. The buyer shall not be entitled to cancel any contract unless the Company has first agreed in writing to such cancellation. Any cancellation by the buyer will be subject to a cancellation charge, which will be determined by the Company and paid by the buyer as a precondition to the Company's acceptance of the buyer's cancellation.

7. SHORTAGES. The buyer shall be deemed to have accepted the quantity of goods delivered as being in accordance with the buyer's order unless within 7 days from receipt of the same the buyer has notified the Company in writing of any shortage.

8. TITLE AND RISK. Risk in the goods shall pass to the buyer at the time of despatch from the Company's works and the Company shall not be liable for any loss or damage whatsoever to the goods, which may occur after that time. Title in the goods shall remain with the Company until such time as full payment for the goods is made. Until such time, the Company shall be entitled to recover the goods or any part thereof. And for the purpose of exercising such rights the Company its employees and agents with appropriate transport may enter upon the buyer’s premises and any other location where the goods are situated. Furthermore, if payment is not received and the buyer should be wound up or a receiver appointed over the whole or part of the buyers undertaking or an execution of distress levied against the buyer, the Company shall be entitled to enter and repossess the goods or trace the goods or the proceeds of sale in your hands or in the hands of any liquidator or receiver.

9. TERMS OF PAYMENT. Unless otherwise agreed by the Company in writing, all invoices must be paid without retention or set-off, on or before the last day of the calendar month following the month in which they were invoiced or as stated in the Company's quotation. Failure to pay the full amount due will entitle the company without notice and without prejudice to its other rights, to refuse to effect delivery or allow collection by any agent of the buyer, or any further consignment of goods without incurring any liability whatsoever to the purchaser. The Company reserves the right to charge the buyer interest on any amount overdue at the rate of 2% over the standard Bank of England base rate current at the time the account becomes due.

10. NON-ASSIGNMENT. The contract or any party thereof shall not be assigned by the buyer without the written consent of the company.

11. LIQUIDATION. If the buyer shall make default in or commit any breach of any of his obligations to the Company or if any distress or execution shall be levied upon the buyer's property or assets or if the buyer shall make or offer to make any arrangements or composition with creditors or commit any act of bankruptcy or if any petition or receiving order in bankruptcy shall be presented or made against him or if the buyer shall be a limited company and any resolution or petition to wind up such company's undertaking, property or assets, or any part thereof, shall be appointed, the Company shall have the right forthwith to determine any contract and to cancel any outstanding delivery or deliveries and to stop any goods in transit, but all without prejudice to any remedy which the Company may have in respect of the consequential non-complete or non-performance of the contract.

12. WARRANTY. All equipment complies with the high standards of quality established by the Company both in respect of materials and workmanship and as the sole and exclusive remedy in discharge of this warranty the Company undertakes to replace free of charge within 360 days from date of despatch from its works any components of its manufacture, which are proved to the satisfaction of the Company (whose decision shall be final and binding) to be defective in materials and workmanship provided notice in writing to the Company is given within 10 days of the defect occurring and provided the component which is the subject of the complaint, if the Company so requests returned pre-paid to the Company's works at Chester. In the case of defective components or parts not of the Company's manufacture the Company's liability shall be limited to such adjustment or allowance as the manufacturer there of shall make. The Company shall not accept responsibility for such work done or expense incurred by the buyer in connection with any repair or replacement unless the Company's prior written authorisation has been obtained. This warranty is in lieu of and excludes all other conditions and warranties whatsoever whether expressed or implied and whether under common law, statute law or otherwise and apart from aforesaid the Company hereby expressly excludes all liability for any loss or damage whatsoever arising and howsoever caused. The buyer warrants that it will pass on, to all third parties to whom it may supply the goods, all information as to the use and safe handling of the goods, as may have been passed onto the buyer by the Company.

13. DESIGN AND MANUFACTURE. Where goods are made to the buyer’s specifications, instructions or design, the buyer undertakes full responsibility for the suitability and accuracy of the specifications, instructions or design and undertakes to indemnify the Company for any loss, damage or expense in respect of any liability arising under the provisions of the Customer Protection Act 1987 in relation to the specification or design of such goods. The Company confirms all specifications within a quotation that is valid for 30 days from the date of quotation.

14. LEGAL CONSTRUCTION. The contract shall in all respects be constructed and operate as a contract governed by English Law and unless otherwise agreed, is subject to the jurisdiction of the English Court. The legal construction of the clauses shall not be affected by their titles.

Whilst every endeavour has been made to supply equipment as described in this price list, all items are offered subject to availability and CMCO can accept no responsibility for mistakes in the text. It may sometimes be necessaryto offer an alternative CMCO product to those selected. However, the performance and the integrity will be of the same high quality as you would expect from CMCO.

Due to our policy of continual development, we reserve the right to change dimensions, weights, specifications, discounts, and prices without prior warning. Please check with the CMCO sales team when ordering.

231

delivery. To progress orders or to gain a P.O.D., please contact our sales team



C O R P O R A T I O N



columbus mckinnon catalogue 2012

Documents