compressive properties-astm d695
DESCRIPTION
Compressive Properties-ASTM D695 - ISO 604TRANSCRIPT
ASTM D 695 and ISO 604Compressive Properties-ASTM D695, ISO 604Specimen Size:Specimens can either be blocks or cylinders. For ASTM, the typical blocks are 12.7 x 12.7 x 25.4mm ( by by 1 in). and the cylinders are 12.7mm ( in) in diameter and 25.4mm (1 in) long. For ISO, the preferred specimens are 50 x 10 x 4mm for modulus and 10 x 10 x 4mm for strength.ISO 527-1,-2Tensile Properties - ISO 527-1,-2Test Specimen Summary
SpecimenNotePreferred Thickness (mm)
Type 1APreferred for directly molded multi-purpose test specimens.4
Type 1BPreferred for machined test specimens.4
Type 1BAScaled down version of 1B. All dimensions except thickness scaled by 1.2.>2
Type 1BBScaled down version of 1B. All dimensions except thickness scaled by 1.5.>2
Type 5ASmall specimen.>2
Type 5BSmall specimen>1
Type 1A, 1B, 1BA, and 1BB Specimen
Type 5A and 5B SpecimenASTM D 638Tensile Properties - ASTM D638
SpecimenRigidity CaseNoteThickness
Type IRigidPreferred specimen.