contents of revised national standards · 2012. 10. 29. · cns number category number title of...
TRANSCRIPT
國家標準
1
標準公報 / 一O一年 第十七期
Standards Gazette / Number 17, 2012
1. 國家標準
National Standards
1.1 國家標準制定、修訂及廢止公布
Promulgation for development, revision and withdrawal of national standards
經濟部 公告
發文日期:中華民國 101 年 10 月 12 日
發文字號:經授標字第 10120050740 號
主 旨:制定「道路車輛-用於控制、指示器及信號之符號」國家標準等三種;修訂「電動推進
道路車輛-安全規範-第 3 部:預防人員電擊之保護」國家標準等五種。
依 據:國家標準制定辦法第十四條。
公告事項:
一、制定國家標準三種(如目錄)。
二、修訂國家標準五種(如目錄)。
部 長 施 顏 祥
制定國家標準目錄
Contents of corrigendum national standards
標準總號
CNS
Number
類 號
Category
Number
標 準 名 稱
Title of Standard
15515-2 D3209-2
電動推進道路車輛-鋰離子牽引電池組及系統之試驗規範-第 2 部:高電能量應用
Electrically propelled road vehicles - Test specification for lithium - ion
traction battery packs and systems - Part 2: High - energy applications
15589 D1081 道路車輛-用於控制、指示器及信號之符號
Road vehicles - Symbols for controls, indicators and tell-tales
15593-42 X2019-42
電力計量-讀表、計費及負載控制之資料交換-第 42 部:連接導向非同步資料交換之實體層服務及程序
Electricity metering - Data exchange for meter reading, tariff and load
control - Part 42: Physical layer services and procedures for connection
- oriented asynchronous data exchange
國家標準
2
標準公報 / 一O一年 第十七期
Standards Gazette / Number 17, 2012
修訂國家標準目錄
Contents of revised national standards
標準總號
CNS
Number
類 號
Category
Number
標 準 名 稱
Title of Standard
2456-1 K3012-1 聚乙烯塑膠配管系統-第 1 部:通則
Polyethylene (PE) pipes and fittings − Part 1: General
2456-2 K3012-2 聚乙烯塑膠配管系統-第 2 部:管
Polyethylene (PE) pipes and fittings - Part 2: Pipes
2456-3 K3012-3 聚乙烯塑膠配管系統-第 3 部:管件
Polyethylene (PE) pipes and fittings - Part 3: Fittings
2456-5 K3012-5
聚乙烯塑膠配管系統-第 5 部:系統適合度
Polyethylene (PE) pipes and fittings - Part 5: Fitness for purpose of the
system
15499-3 D1078-3
電動推進道路車輛-安全規範-第 3 部:防止人員電擊之保護
Electrically propelled road vehicles - Safety specifications Part 3:
Protection of persons against electric shock
經濟部 公告
發文日期:中華民國 101 年 10 月 5 日
發文字號:經授標字第 10120050700 號
主 旨:制定「機械安全之人因工程設計-第 1 部:人員全身進入機械內的開口所需尺度之決定
原則」國家標準等十四種;修訂「產品幾何規範(GPS)-線性尺度之 ISO 公差編碼
系統-第 1 部:公差、偏差及配合之基礎」國家標準等十九種;廢止「製圖儀器名詞」
國家標準等三十六種。
依 據:國家標準制定辦法第十四條及第十六條。
公告事項:
一、制定國家標準十四種(如目錄)。
二、修訂國家標準十九種(如目錄)。
三、廢止國家標準三十六種(如目錄)。
部 長 施 顏 祥
國家標準
3
標準公報 / 一O一年 第十七期
Standards Gazette / Number 17, 2012
制定國家標準目錄
Contents of corrigendum national standards
標準總號
CNS
Number
類 號
Category
Number
標 準 名 稱
Title of Standard
15562-1 S1268-1
固定式訓練設備-第 1部:一般安全要求與試驗法
Stationary training equipment - Part 1: General safety requirements and
test methods
15562-2 S1268-2
固定式訓練設備-第 2部:力量訓練設備-附加之特定安全要求與試驗法
Stationary training equipment - Part 2: Strength training equipment -
Additional specific safety requirements and test methods
15562-4 S1268-4
固定式訓練設備-第 4部:力量訓練台-附加之特定安全要求與試驗法
Stationary training equipment - Part 4: Strength training benches -
Additional specific safety requirements and test methods
15562-5 S1268-5
固定式訓練設備-第 5部:固定式健身車與上半身曲柄訓練設備-附加之
特定安全要求與試驗法
Stationary training equipment - Part 5: Pedal crank training equipment -
Additional specific safety requirements and test methods
15562-6 S1268-6
固定式訓練設備-第 6部:跑步機-附加之特定安全要求與試驗法
Stationary training equipment - Part 6: Treadmills - Additional specific
safety requirements and test methods
15562-7 S1268-7
固定式訓練設備-第 7部:划船機-附加之特定安全要求與試驗法
Stationary training equipment - Part 7: Rowing machines - Additional
specific safety requirements and test methods
15562-8 S1268-8
固定式訓練設備-第 8部:踏步機、爬梯機及攀爬機-附加之特定安全要
求與試驗法
Stationary training equipment - Part 8: Steppers - Stairclimbers and
climbers - Additional specific safety requirements and test methods
15562-9 S1268-9
固定式訓練設備-第 9部:橢圓訓練機、附加之特定安全要求與試驗法
Stationary training equipment - Part 9: Elliptical trainers - Additional
specific safety requirements and test methods
15562-10 S1268-10
固定式訓練設備-第 10部:具固定輪或無自由輪健身車-附加之特定安
全要求與試驗法
Stationary training equipment - Part 10: Exercise bicycles with a fixed
wheel or without freewheel - Additional specific safety requirements and
test methods
15564-5 B2813-5
ISO一般用途公制螺紋-公差-第 5部:鍍鋅前依公差位置 h具最大尺度
之熱浸鍍鋅外螺紋相配合的內螺紋限界尺度
ISO general purpose metric screw threads - Tolerances - Part 5: Limits
of sizes for internal screw threads to mate with hot-dip galvanized
external screw threads with maximum size of tolerance position h
before
國家標準
4
標準公報 / 一O一年 第十七期
Standards Gazette / Number 17, 2012
標準總號
CNS
Number
類 號
Category
Number
標 準 名 稱
Title of Standard
15565-1 B1393-1
機械安全之人因工程設計-第 1部:人員全身進入機械內的開口所需尺度
之決定原則
Ergonomic design for the safety of machinery - Part 1: Principles for
determining the dimensions required for openings for whole-body
access into machinery
15565-2 B1393-2
機械安全之人因工程設計-第 2部:進入開口所需尺度之決定原則
Ergonomic design for the safety of machinery - Part 2: Principles for
determining the dimensions required for access openings
15566-2 B1394-2
機械安全-壓敏保護裝置-第 2部:壓敏端面及壓敏棒之一般設計與試驗
原則
Safety of machinery - Pressure-sensitive protective devices - Part 2:
General principles for the design and testing of pressure-sensitive
edges and pressure-sensitive bars
22716 S2173
化粧品─優良製造規範(GMP)─優良製造規範指導綱要
Cosmetics - Good Manufacturing Practices (GMP) - Guidelines on
Good Manufacturing Practices
修訂國家標準目錄
Contents of revised national standards
標準總號
CNS
Number
類 號
Category
Number
標 準 名 稱
Title of Standard
4-1 B1002-1
產品幾何規範(GPS)-線性尺度之 ISO公差編碼系統-第 1部:公差、偏
差及配合之基礎
Geometrical product specifications (GPS) - ISO code system for
tolerances on linear sizes - Part 1: Basis of tolerances, deviations and
fits
4-2 B1002-2
產品幾何規範(GPS)-線性尺度之 ISO公差編碼系統-第 2部:孔及軸之
標準公差類別與限界偏差表
Geometrical product specifications (GPS) - ISO code system for
tolerances on linear sizes - Part 2: Tables of standard tolerance classes
and limit deviations for holes and shafts
1254 N5020 醬菜類罐頭
Canned pickled vegetables
1255 N5021 薑類罐頭
Canned ginger
1256 N5022 荸薺罐頭
Canned water chestnut
國家標準
5
標準公報 / 一O一年 第十七期
Standards Gazette / Number 17, 2012
標準總號
CNS
Number
類 號
Category
Number
標 準 名 稱
Title of Standard
1257 N5023 豆類罐頭
Canned beans
2348 N5063 蘆筍罐頭
Canned asparagus
2539 N5074 蔬菜類罐頭
Canned vegetables
2993 N5090 銀耳罐頭
Canned white jelly fungus
3184 N5096 玉米筍罐頭
Canned baby corn or young corn
3185 N5097 甘藷罐頭
Canned sweet potatoes
3314 N5100 豆芽菜罐頭
Canned bean sprout
3765-60 C4125-60
家用和類似用途電器-安全性-第 2-60部:漩渦浴缸及漩渦浴池之個別
規定
Household and similar electrical appliances - Safety - Part 2-60:
Particular requirements for whirlpool baths and whirlpool spas
4146 N5129 黃秋葵罐頭
Canned okra
4149 N5132 中式食品罐頭
Canned chinese foods
8057 O1022 混凝土模板用合板
Plywood for concrete-form
8780 C3133
家庭用絕緣式電熱水器(瞬熱型)
Electric water heater (instant heating type) with insulated heating
elements
11712 N5220 甜玉米罐頭
Canned sweet corn
12650 N5224 粥類罐頭
Canned mixed congee
國家標準
6
標準公報 / 一O一年 第十七期
Standards Gazette / Number 17, 2012
廢止國家標準目錄
Contents of withdrawn national standards
標準總號
CNS
Number
類 號
Category
Number
標 準 名 稱
Title of Standard
8752 Z7105 製圖儀器名詞
Nomenclature of Drawing Instruments
8887 Z7106 製圖儀器之性能分級
Drawing Instruments: Technical Requirements
8888 Z7107
P系列精密製圖儀器之換腳圓規
Compass (Half Set) with Interchangeable Point for Precision Drawing
Instruments (P)
8889 Z7108 P系列精密製圖儀器之分規
Dividers for Precision Drawing Instruments (P)
8890 Z7109
P系列精密製圖儀器之換腳彈簧圓規
Spring Bow Compass with Interchangeable Points for Precision
Drawing Instruments (P)
8891 Z7110 P系列精密製圖儀器之彈簧圓規及分規
Spring - Bow Divider for Precision Drawing Instruments
8892 Z7111
P系列精密製圖儀器換腳點圓規
Fixed Centre Spring Bow with Interchangeable Point for Precision
Drawing Instruments (P)
8893 Z7112 P系列精密製圖儀器之鴨嘴筆尖
Pen Points for Precsion Drawing Instruments (P)
9043 Z7113 P系列精密製圖儀器之鉛筆尖
Pencil Points for Precision Drawing Instruments (P)
9044 Z7114 P系列精密製圖儀器之針尖
Divider Points for Precision Drawing Instruments (P)
9045 Z7115 P系列精密製圖儀器之接長桿
Lengthening Bar for Precision Drawing Instruments (P)
9046 Z7116 製圖儀器之用針
Needles for Drawing Instrumonts
9047 Z7117 製圖儀器之樞針
Pivots Needles for Fixed Center Spring Bow
9048 Z7118 P系列精密製圖儀器之鴨嘴筆
Ruling Pen for Precision Drawing Instruments (P)
9049 Z7119 P系列精密製圖儀器之粗線鴨嘴筆
Border Pens for Precision Drawing Instruments (P)
國家標準
7
標準公報 / 一O一年 第十七期
Standards Gazette / Number 17, 2012
標準總號
CNS
Number
類 號
Category
Number
標 準 名 稱
Title of Standard
9765 Z7123 製圖儀器之曲線鴨嘴筆
Curve Pens for Drawing Instruments
9766 Z7124 製圖儀器之雙線曲線鴨嘴筆
Double Curve Pen for Drawing Instruments
9767 Z7125 製圖儀器之雙線鴨嘴筆
Road Pens for Drawing Instruments
9768 Z7126 製圖儀器之圓心釘及圓心板
Center Tacks, Horn Centres for Drawing Instruments
9769 Z7127 製圖儀器之比例分規
Drawing Instruments, Proportional Divider
9770 Z7128
製圖儀器之大型彈簧圓規
Drawing Instruments Big Bow Pencil and Big Bow Combinaion with
Interchangeable Parts
9771 Z7129 S系列製圖儀器之換腳圓規
Compass with Interchangeable Points for School Drawing Instruments
9772 Z7130 系列製圖儀器之分規
Divider for School Drawing Instruments
9773 Z7131 S系列製圖儀器之兩用彈簧圓規
Reversible Spring Bow for School Drawing Instruments
9774 Z7132 S系列製圖儀器之彈簧圓規及分規
Spring Bow Divider for School Orawing Instruments
9924 Z7148
S系列製圖儀器之換腳點圓規
Fixed Centre Spring Bow with Interchangeable Point for School
Drawing Instruments
9925 Z7149 S系列製圖儀器之鉛筆尖
Pencil Points for School Drawing Instruments
9926 Z7150 S系列製圖儀器之鴨嘴筆尖
Pen Point for School Drawing Instruments
9927 Z7151 S系列製圖儀器之針尖
Divider Points for School Drawing Instruments
9928 Z7152 S系列製圖儀器之接長桿
Lengthening Bar for School Drawing Instruments
9929 Z7153 S系列製圖儀器之鴨嘴筆
Ruling Pen for School Drawing Instruments
9930 Z7154 製圖儀器之調節鈕
Spring Bow Centre-Wheel for Drawing Instruments
國家標準
8
標準公報 / 一O一年 第十七期
Standards Gazette / Number 17, 2012
標準總號
CNS
Number
類 號
Category
Number
標 準 名 稱
Title of Standard
9931 Z7155 製圖儀器之螺紋襯套
Threaded Bushing for Drawing Instruments
9932 Z7156 製圖儀器之握針器
Needle Holders for Drawing Instruments
9933 Z7157
P系列製圖儀器之圓規針筆接頭
Indian Ink Writing and Drawing Instruments, Adapters for Compasses
for Ink Writing Pens for Precision Drawing Instruments (P)
9934 Z7158 S系列製圖儀器之原子筆尖
Points for Ball Point Pen Refills for School Drawing Instruments (S)
經濟部 公告
發文日期:中華民國 101 年 10 月 8 日
發文字號:經授標字第 10120050720 號
主 旨:制定「可燃性粉塵環境用電機設備-第 1 部:外殼保護〝tD〞」國家標準等十一種;修
訂「磨石子板及磨石子地磚」國家標準等二十一種;廢止「磨石子板」國家標準等十四
種。
依 據:國家標準制定辦法第十四條及第十六條。
公告事項:
一、制定國家標準十一種(如目錄)。
二、修訂國家標準二十一種(如目錄)。
三、廢止國家標準十四種(如目錄)。
部 長 施 顏 祥
制定國家標準目錄
Contents of corrigendum national standards
標準總號
CNS
Number
類 號
Category
Number
標 準 名 稱
Title of Standard
13188-3 X5019-3
語言名稱代碼表示法-第 3 部:全面涵蓋語言之三字母代碼
Codes for the representation of names of languages
part 3: Alpha-3 code for comprehensive coverage of languages
國家標準
9
標準公報 / 一O一年 第十七期
Standards Gazette / Number 17, 2012
標準總號
CNS
Number
類 號
Category
Number
標 準 名 稱
Title of Standard
15207-10 C6443-10
道路車輛-窄頻輻射電磁能量之電擾動組件試驗法-第 10部:音頻延伸
範圍之傳導擾動免疫力
Road vehicles - Component test methods for electrical disturbances
from narrowband radiated electromagnetic energy - Part 10: Immunity
to conducted disturbances in the extended audio frequency range
15570 K61181
石油產品-中質蒸餾燃油芳香烴類別含量測定法〔高效液相層析(非逆洗)
/折射率偵檢法〕
Petroleum products ? Determination of aromatic hydrocarbon types in
middle distillates ? High performance liquid chromatography method
(non-backflush) with refractive index detection
15579 L3270 紡織品-表面活性劑測定-烷基酚聚氧乙烯醚
Textiles - Determination of surfactant - Alkylphenol ethoxylates
15580-1 L3271-1
紡織品-甲醛測定法-第 1部:游離及水解甲醛(水萃取法)
Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed
formaldehyde (Water extraction method)
15580-2 L3271-2
紡織品-甲醛測定法-第 2部:甲醛釋出量(蒸氣吸收法)
Textiles - Determination of formaldehyde - Part 2: Released
formaldehyde (Vapour absorption method)
15581 O1058 闊葉樹製材分等
Grading rules for hardwood sawn lumber
15582 O1059
針葉樹底材用製材分等
Grading rules of softwood sawn lumber for unexposed materials use in
building
15583 O1060 運輸墊板用合板
Plywood for pallet
15591-1 C4528-1
可燃性粉塵環境用電機設備─第 1部:外殼保護〝tD〞
Electrical apparatus for use in the presence of combustible dust - Part
1: Protection by enclosures〝tD〞
15591-4 C4528-4
可燃性粉塵環境用電機設備─第 4部:保護型式〝pD〞
Electrical apparatus for use in the presence of combustible dust - Part
4: Type of protection〝pD〞
國家標準
10
標準公報 / 一O一年 第十七期
Standards Gazette / Number 17, 2012
修訂國家標準目錄
Contents of revised national standards
標準總號
CNS
Number
類 號
Category
Number
標 準 名 稱
Title of Standard
442 O1001 木材之分類
Classification of timber
802 Z5006 金屬製開口提桶
Metal bucket
1217 K6108
石油及其產品手動取樣法
Method of practice for manual sampling of petroleum and petroleum
products
1275 K6119
皮革-物性及機械性質測試-皮面抗龜裂性與皮面龜裂指數
Leather - Physical and mechanical tests - Determination of resistance to
grain cracking and grain crack index
2444 Z5024 聚乙烯瓶
Polyethylene bottle
3365 Z5036 王冠式瓶蓋
Crown caps
3484 K6338 石油產品流動點試驗法
Method of test for pour point of petroleum products
3517 K6339
石油產品與瀝青類物質水分試驗法(蒸餾法)
Method of test for water in petroleum products and bituminous materials
by distillation
3803 A2049 磨石子板及磨石子地磚
Terrazzo blocks and terrazzo tiles
6358 K6577
燃料油水分與沈澱物試驗法(離心法)
Method of test for water and sediment in fuel oils by the centrifuge
method
6729 Z5070 包裝用聚乙烯塑膠薄膜
Polyethylene films for packaging
7701 K6675
皮革-皮面擴張及強度測定-鋼球破裂試驗法
Leather - Determination of distension and strength of grain - Ball burst
test
8381 X5009 資訊技術-人類性別表示法之代碼
Information technology - Codes for the representation of human sexes
8881 Z5107 一貫運輸用箱狀墊板
Box pallets for through transit
9449 Z5113 印刷用感壓性黏膠紙
Pressure sensitive adhesive paper for printing
國家標準
11
標準公報 / 一O一年 第十七期
Standards Gazette / Number 17, 2012
標準總號
CNS
Number
類 號
Category
Number
標 準 名 稱
Title of Standard
10015 K4075 硫化橡膠動態性質用語
Glossary of terms relating to dynamic properties of vulcanized rubber
11402 X1011
資訊技術-安全技術-核對字元系統
Information technology - Security techniques - Check character
systems
11733 K4081 橡膠絲
Rubber threads
13509 Z5153 附柱墊板
Post pallets
13728 K4086 橡膠詞彙
Rubber vocabulary
13889-3 X0038-3
資訊技術-抽象語法記法(一):限制規格
Information technology - Abstract syntax notation one (ASN.1) :
Constraint specification
廢止國家標準目錄
Contents of withdrawn national standards
標準總號
CNS
Number
類 號
Category
Number
標 準 名 稱
Title of Standard
445 O1004 CNS 445原木之商用長度(→CNS 442)
Commercial lengths of logs
803 Z6001 金屬製提桶檢驗法(→CNS 802)
Method of test for metal bucket
2445 Z6005 聚乙烯塑膠瓶檢驗法(→CNS 2444)
Method of test for polyethylene bottle
3366 Z6015 王冠式瓶蓋檢驗法(→CNS 3365)
Method of test for crown cap
3804 A3062 磨石子地磚檢驗法
Method of test for terrazzo titles
4748 O1020 CNS 4748原木之分等(→CNS 442)
Grading rules of logs
4749 O1021 CNS 4749木材之測計(台灣區適用)(→CNS 442)
Measurement of timber (For Taiwan area)
6730 Z6029 包裝用聚乙烯塑膠膜檢驗法(→CNS 6729)
Method of test for polyethylene films for packaging
國家標準
12
標準公報 / 一O一年 第十七期
Standards Gazette / Number 17, 2012
標準總號
CNS
Number
類 號
Category
Number
標 準 名 稱
Title of Standard
6871 A2089 磨石子板
Terrazzo blocks
6872 A3117 磨石子板檢驗法
Method of test for terrazzo blocks
8882 Z6047 一貫運輸用箱狀墊板試驗法(→CNS 8881)
Method of test for box pallets for through transit
9450 Z6054 印刷用感壓黏性膠紙檢驗法(→CNS 9449)
Method of test for pressure sensitive adhesive paper for printing
11734 K6893 橡膠絲檢驗法
Methods of test for rubber threads
13510 Z6098 附柱墊板試驗法(→CNS 13509)
Method of test for post pallets