copyright © 2012 by vatech¯动ez3d plus可透过easydent或直接执行软件导入dicom文件。...
TRANSCRIPT
-
Copyright 2012 by VATECH
Ez3D plus User Manual 1
Copyright 2012 by VATECH
Ez3D plus 3D
Ez3D plus Ez3D plus
Ez3D plus
Tel. +82-1588-9510
E-mail [email protected]
http//www.vatech.co.kr
473-4, Yun-Min Bldg, Bora-dong, Giheung-gu, Yongin-si, Gyeonggi-do, Republic of Korea
Ez3D plus User Notice
Ez3D plus (1.2.3.1)
1.
2.
3. Ez3D plus VATECH
4. Ez3D plus USB
5. USB
2012-05
1.2.3.1
VATECH Co., Ltd.
-
2 Ez3D plus User Manual
1 (Introduction) ..................................................................................................... 10
1.1 Ez3D 2009 ? (What is Ez3D plus ?) ................................................................. 10
1.2 Ez3D plus (Ez3D plus Features) .......................................................................... 10
1.3 (End User License Agreement) ....................................................... 11
2 (Main Screen Description) .................................................................... 12
2.1 Ez3D plus (Ez3D plus Start-up) ........................................................................ 12
2.2 (Main Screen Description) ...................................................................... 14
2.3 (Main Window) ............................................................................................... 18
2.3.1 MPR (Main Window MPR) ............................................................................... 18
2.3.2 - 3D .......................................................................................................................... 22
3 (Utilization of Basic Functions) ........................................................ 25
3.1 MPR (MPR Mode Rotating Axes) .......................................................... 25
3.1.1 (MPR) (Understanding Axis (Understanding MPR Image)) .................. 25
3.1.2 ....................................................................................................................... 27
3.1.3 ....................................................................................................................... 27
3.1.4 ....................................................................................................................... 28
-
Ez3D plus User Manual 3
3.2 (Multi Slice View) ............................................................................... 29
3.2.1 ................................................................................................................ 29
3.2.2 ........................................................................................................ 30
3.2.3 ................................................................................................................ 31
3.3 (Customizing Layout) ............................................................................. 36
3.3.1 ....................................................................................................................... 36
3.3.2 ................................................................................................................ 38
3.3.3 ....................................................................................................................... 39
3.4 (Using the mouse) ....................................................................................... 42
3.4.1 ............................................................................................................................... 42
3.5 ........................................................................................... 44
4 (File Management) .................................................................................... 49
4.1 DICOM (DICOM Import) .................................................................................. 49
4.1.1 ....................................................................................................................... 51
4.2 (Open Project) ............................................................................................. 54
4.2.1 ................................................................................................................ 55
4.3 (Save Project) .............................................................................................. 56
4.4 (Print) .................................................................................................................. 57
4.4.1 (Window Print) ..................................................................................................... 57
4.4.2 DICOM (DICOM Print) .............................................................................................. 62
4.4.3 (Report) ................................................................................................................ 64
-
4 Ez3D plus User Manual
4.5 (Load Layout) ..................................................................................... 75
4.6 (Save Layout) ...................................................................................... 76
4.7 (Volume Information) ......................................................................... 77
4.8 Ez3D plus (Ez3D plus Closing) ............................................................................ 78
5 (Image Processing) .................................................................................... 79
5.1 (Edit) ................................................................................................................... 79
5.1.1 (Undo) .......................................................................................................................... 79
5.1.2 (Redo) .......................................................................................................................... 79
5.1.3 (Delete All) ........................................................................................................... 80
5.1.4 (Reset) .......................................................................................................................... 80
5.2 (View) ................................................................................................................. 81
5.2.1 (Panning) ...................................................................................................................... 81
5.2.2 (Rotating) ..................................................................................................................... 83
5.2.3 (Zooming) .................................................................................................................... 85
5.2.4 (Inverting) ............................................................................................................ 87
5.2.5 (Windowing) ........................................................................................................ 87
5.2.6 Coloring ....................................................................................................................... 89
5.2.7 Oblique ......................................................................................................... 91
5.2.8 3D (3D Zoom) ............................................................................................................. 94
5.2.9 Cephalo (Premium) Image Reconstruction of a Cephalo Image View
(Premium Version Only) ........................................................................................................ 96
-
Ez3D plus User Manual 5
5.2.10 TMJ (TMJ View) ........................................................................................................ 98
5.2.11 (Study Information) .............................................................................................. 101
5.2.12 VOI (VOI Overlay) ............................................................................................... 103
5.2.13 (Tool Bar) ................................................................................................................. 104
5.3 (Measure) ............................................................................................................ 105
5.3.1 (Length) ..................................................................................................................... 105
5.3.2 (Tapeline) ........................................................................................................... 107
5.3.3 2D Angle .............................................................................................................................. 108
5.3.4 3D Angle .............................................................................................................................. 110
5.3.5 Profile ................................................................................................................... 111
5.3.6 (ROI ) ......................................................................................................... 112
5.3.7 Area ...................................................................................................................... 113
5.3.8 (Professional ) (Volume (Professional Version Only).................... 114
5.4 (Annotation) ...................................................................................................... 119
5.4.1 (Arrow) .............................................................................................................. 119
5.4.2 (Note) ................................................................................................................. 120
5.4.3 (Free Draw) ........................................................................................................ 121
5.5 (Segmentation) .................................................................................................. 122
5.5.1 (Sculpt) ....................................................................................................................... 122
5.5.2 (Opacity) ............................................................................................................ 123
5.5.3 (Threshold) ................................................................................................................. 124
5.5.4 (Apply Mask) ................................................................................................. 125
5.5.5 (Reset Mask) ...................................................................................................... 126
-
6 Ez3D plus User Manual
5.5.6 (Premium ) (Maxillary / Mandible (Premium Version Only)) ....... 126
6 (Curve Use) .............................................................. 129
6.1 (Premuim) Auto Curve (Premium Version Only)129
6.2 (Manual Curve) ......................................................................... 131
6.3 (Cross-sectional View) .............................................................. 132
6.4 (Professional ) Sectional Detail View (Professional Version
Only) ........................................................................................................................... 135
6.5 (Curve Manager) ....................................................................... 142
7 (Simulation) ...................................................................................................... 143
7.1 (Canal Drawing) .................................................................................... 143
7.1.1 (Canal Drawing) ............................................................................................. 143
7.1.2 (Auto Canal Drawing) ............................................................................ 146
7.1.3 (Canal Manager) ........................................................................................ 150
7.2 (Implant) ........................................................................................................... 151
7.2.1 (Insert Single Implant) ............................................................................... 151
7.2.2 (Insert Multiple Implant) ............................................................................ 153
7.2.3 (Implant Manager) ........................................................................................... 155
7.2.4 (Implant Library) ............................................................................................ 156
7.2.5 (Bone Density) ....................................................................................................... 159
7.3 (Collision Detection) ................................................................................... 160
-
Ez3D plus User Manual 7
8 (Special Functions) .................................................................................... 164
8.1 (Capture) ............................................................................................................. 164
8.2 (Counsel) ................................................................................................... 167
8.2.1 ..................................................................................................................... 167
8.2.2 ............................................................................................................................. 169
8.2.3 ..................................................................................................................... 172
8.3 CD/DVD (Professional) CD/DVD Burning (Professional Version
Only) ........................................................................................................................... 173
8.3.1 ..................................................................................................................... 173
8.3.2 - (2D Viewer) ........................................................................ 176
8.3.3 - (3D Viewer) ........................................................................ 188
8.4 () () Memory (Simple Viewer) (Professional
Version Only) .............................................................................................................. 189
8.5 STL (STL Export) .................................................................................. 191
8.6 (Fine Tuning) .................................................................................................... 193
8.6.1 (Edit Color) ........................................................................................................ 196
8.6.2 (Load Preset) ................................................................................................ 197
8.6.3 (Save Preset) ................................................................................................ 198
8.6.4 (Exit) .......................................................................................................................... 198
8.7 () Knowledge Info (Premium Version Only) ................ 199
8.8 (Setting) ............................................................................................................... 201
8.8.1 (Configuration) .................................................................................................... 202
-
8 Ez3D plus User Manual
9 (Help) ................................................................................................................ 209
9.1 (Contents) .......................................................................................................... 209
9.2 () (System Information (About)) ....................................................... 209
9.3 USB (USB Lock Key Information) ............................................. 210
.................................................................................................................................... 211
1 Ez3D plus ........................................................................................................... 211
1.1 ..................................................................................................................... 211
1.1.1 ..................................................................................................................... 211
1.1.2 .............................................................................................................. 211
1.1.3 ..................................................................................................................... 212
1.2 Ez3D plus .................................................................................................. 214
1.2.1 HASP () ....................................................................................... 214
1.2.2 Ez3D plus ................................................................................................................... 218
1.2.3 ................................................................................................................. 223
1.2.4 ............................................................................................................................. 224
1.2.5 ................................................................................................................. 225
2 Ez3D plus ................................................................................................. 226
3 DICOM ..................................................................................................... 228
-
Ez3D plus User Manual 9
3.1 DICOM ..................................................................................................... 228
3.2 Ez3D plus DICOM ........................................................................... 229
3.3 Ez3D plus DICOM ....................................................................................... 229
3.4 DICOM ............................................................................................. 230
3.5 AE TitleIP ....................................................................... 230
-
1 (Introduction)
1.1 Ez3D plus ? (What is Ez3D plus ?)
10 Ez3D plus User Manual
1 (Introduction)
1.1 Ez3D plus ? (What is Ez3D plus ?)
Ez3D plusDICOM3D2DMPR
Ez3D plus
1.2 Ez3D plus (Ez3D plus Features)
Ez3D plus3DEz3D plus
Ez3D plus 2D 3D
Cross-Section View
VR ()MIPminIP X-
MPR 3D Zoom 3D
Segmentation
(Free DrawCaunsel Report
Setting sectional gap()sectional thickness() default
windowing()
-
1 (Introduction)
1.3 (End User License Agreement)
Ez3D plus User Manual 11
1.3 (End User License Agreement)
Ez3D plus
CD(c
onfirm)
. Windows XP Windows Vista Microsoft .
DICOM ACR / NEMA .
-
2 (Main Screen Description)
2.1 Ez3D plus (Ez3D plus Start-up)
12 Ez3D plus User Manual
2 (Main Screen Description) 2.1 Ez3D plus (Ez3D plus Start-up)
Ez3D plusEasyDentDicom
EasyDent EasyDent CT Ez3D
plus
Ez3D plus Ez3D
plus C:\Ez3D plus\Ez3D plus.exe
Ez3D plus
'Help' > 'About'
-
2 (Main Screen Description)
2.1 Ez3D plus (Ez3D plus Start-up)
Ez3D plus User Manual 13
Ez3D plus Ez3D plus
-
2 (Main Screen Description)
2.2 (Main Screen Description)
14 Ez3D plus User Manual
2.2 (Main Screen Description)
Ez3D plus(File)
(Edit)(View)(Measure)(Annotation)(Segmentation)(Simulation)
(Tools)(Help)
38
3.3.2 3.3.3
MPROblique3D ZoomCurveCephaloTMJ
MPR
CephaloTMJOblique3D ZoomCurve
-
2 (Main Screen Description)
2.2 (Main Screen Description)
Ez3D plus User Manual 15
-
2 (Main Screen Description)
2.2 (Main Screen Description)
16 Ez3D plus User Manual
-
2 (Main Screen Description)
2.2 (Main Screen Description)
Ez3D plus User Manual 17
MPR3DMPR(Multi-Planar Reconstruction) MPR
(Coronal pane)(Sagittal pane)(Axial pane)
3D2.3
(Main Window)
-
2 (Main Screen Description)
2.3 (Main Window)
18 Ez3D plus User Manual
2.3 (Main Window)
Ez3D plus
MPR 3D MPR
(Coronal pane)(Sagittal pane)(Axial pane))
2.3.1 MPR (Main Window MPR)
MPR MPR (Sagittal pane)
( )(Flip Image)(Multi-Slice View)
/(Maximize/Normal)
-
2 (Main Screen Description)
2.3 (Main Window)
Ez3D plus User Manual 19
(Flip Vertically)
(Flip Horizontally)
3.2 (Multi Slice View)
-
2 (Main Screen Description)
2.3 (Main Window)
20 Ez3D plus User Manual
(Normal View)
(Image View)
/ (Rendering Mode / Thickness adjustment)MPR
MPRMPR
MPR
MPRMPR
2.3.2 - 3D
-
2 (Main Screen Description)
2.3 (Main Window)
Ez3D plus User Manual 21
(0~30mm)MPR
(Patient Information)
(Directional information)
(Grid)
(Image Information)(mA)
(kVp)
(Guide for Patient Orientation)
3D
3D
-
2 (Main Screen Description)
2.3 (Main Window)
22 Ez3D plus User Manual
2.3.2 - 3D
3D3DMPR3D
3D(HFAPLR)
H ( Head )
F ( Foot )
A ( Anterior )
P ( Posterior )
L ( Left )
R ( Right )
-
2 (Main Screen Description)
2.3 (Main Window)
Ez3D plus User Manual 23
3DVRVRMIPminIP
X-ray
VR 3D
MIP
(Maximum Intensity Projectio
n)
minIP
(Minimum Intensity Projection)
X-ray X-ray 3D
3DPlane OverlayMPR OverlayOverlay Off
Outline Overlay MPR
Plane Overlay MPR
MPR Overlay MPRMPR
Overlay Off Overlay
-
2 (Main Screen Description)
2.3 (Main Window)
24 Ez3D plus User Manual
3DOverlay
Overlay Off Outline Overlay
Plane Overlay MPR Overlay
-
3 (Utilization of Basic Functions)
3.1 MPR (MPR Mode Rotating Axes)
Ez3D plus User Manual 25
3 (Utilization of Basic Functions) 3.1 MPR (MPR Mode Rotating Axes)
MPRZ
()
MPR (Coronal) (Sagittal)
(Axial) 3DCURVE3D ZoomMPR
MPRCross-SectionalOblique Slice Views
3.1.1 (MPR) (Understanding Axis (Understanding MPR Image))
()()
()MPR
Sagittal view
Axial view
Coronal view
-
3 (Utilization of Basic Functions)
3.1 MPR (MPR Mode Rotating Axes)
26 Ez3D plus User Manual
(Axial View)
(Coronal Axis) (Sagittal Axis)
-
3 (Utilization of Basic Functions)
3.1 MPR (MPR Mode Rotating Axes)
Ez3D plus User Manual 27
3.1.2
MPR
MPR
3.1.3
MPRMPR
-
3 (Utilization of Basic Functions)
3.1 MPR (MPR Mode Rotating Axes)
28 Ez3D plus User Manual
3.1.4
TH0.0
mm
1. CT 2mm
1mm
2. 3D
-
3 (Utilization of Basic Functions)
3.2 (Multi Slice View)
Ez3D plus User Manual 29
3.2 (Multi Slice View)
3.2.1
( ) ()
(Cross-sectional view of image) (Current View)
(Scout View)
(Cross-section option)
(Setting up of Cross-sectional area)
(Setting button) (OK)
(Reset All) (Cancel)
-
3 (Utilization of Basic Functions)
3.2 (Multi Slice View)
30 Ez3D plus User Manual
3x3
3.2.2
( )
-
3 (Utilization of Basic Functions)
3.2 (Multi Slice View)
Ez3D plus User Manual 31
3.2.3
(Select)(Reset) (Panning)(Zoom)
(Windowing)(Invert)(Measure)(Annotation)(Study Info)
(Capture)(Cine player)(Print)(Layout)
( 1x1 4x4) ()
(Select)
(Panning)(Zooming)(Windowing)
(Reset)
-
3 (Utilization of Basic Functions)
3.2 (Multi Slice View)
32 Ez3D plus User Manual
(Panning)
(Zoom)
(Windowing)
(Invert)
(Measure)
(Study Info)
(Annotation)
-
3 (Utilization of Basic Functions)
3.2 (Multi Slice View)
Ez3D plus User Manual 33
(Capture)
overlay
(Cine player)
-
3 (Utilization of Basic Functions)
3.2 (Multi Slice View)
34 Ez3D plus User Manual
AVI
overlay X-ray
[]
AVI
(Save)
AVI
-
3 (Utilization of Basic Functions)
3.2 (Multi Slice View)
Ez3D plus User Manual 35
Microsoft MPEG-4 Video Codec v2
(Print)
4.4 (Print)
-
3 (Utilization of Basic Functions)
3.3 (Customizing Layout)
36 Ez3D plus User Manual
3.3 (Customizing Layout)
3.3.1
Ez3D plusMicrosoft
Windows
& Drag
-
3 (Utilization of Basic Functions)
3.3 (Customizing Layout)
Ez3D plus User Manual 37
-
3 (Utilization of Basic Functions)
3.3 (Customizing Layout)
38 Ez3D plus User Manual
3.3.2
Microsoft Office
Floating
Docking
-
3 (Utilization of Basic Functions)
3.3 (Customizing Layout)
Ez3D plus User Manual 39
3.3.3
()
(Customize)(Customize)
Alt+
Microsoft OfficeAlt
View Tool bar
-
3 (Utilization of Basic Functions)
3.3 (Customizing Layout)
40 Ez3D plus User Manual
(Reset)
(Delete)
(Name)
(Copy Button Image)
(Paste Button Image)
(Reset Button Image)
(Edit Button Image)
-
3 (Utilization of Basic Functions)
3.3 (Customizing Layout)
Ez3D plus User Manual 41
(Change Button Image)
(Default Style)
(Text Only)
(Image and Text)
-
3 (Utilization of Basic Functions)
3.4 (Using the mouse)
42 Ez3D plus User Manual
3.4 (Using the mouse)
()
3.4.1
MPR3D3D Zoom
3D
MPR
Curve
Curve
-
3 (Utilization of Basic Functions)
3.4 (Using the mouse)
Ez3D plus User Manual 43
Move Center
Reset Rotate
Rotate CW(10~90)
( 0 )
Rotate CCW(10~90)
( 0 )
Rotate CW+(1~10)
Rotate CCW+(1~10)
Overlays
Overlays
Panoramic
Panoramic
Interval
Thickness
Insert Point
Remove Point
-
3 (Utilization of Basic Functions)
3.5
44 Ez3D plus User Manual
3.5
File
()
DICOM Import
(DICOM )
DICOM 3.0
Open Project
()
Save Project
()
Print
()
Load Layout
()
Save Layout
()
Volume Info
()
Exit
()
Edit
()
Select
()
Undo
()
Redo
()
Delete
()
Reset
()
View
()
Pan
()
-
3 (Utilization of Basic Functions)
3.5
Ez3D plus User Manual 45
Rotate
()
Zoom
()
Invert
()
Windowing
()
Coloring
3D
Oblique
3D Zoom
(3D ) 3D
Cephalo Cephalo
Study Info
VOI
Toolbar
()
Measure
()
Length
()
Tapeline
()
2D Angle
(2D ) 2D
3D Angle
(3D ) 3D
-
3 (Utilization of Basic Functions)
3.5
46 Ez3D plus User Manual
Profile
ROI
()
Area
Volume
()
Annotation
()
Arrow
()
Note
()
Free Draw
()
Segmentation
()
Sculpt
()
Opacity
()
Threshold
()
Apply Mask
() MPR2D
Reset Mask
()
Maxillary
/Mandible
() 3D
Simulation
()
Panoramic Curve
()
-
3 (Utilization of Basic Functions)
3.5
Ez3D plus User Manual 47
Auto Curve
()
Curve Manage
()
Draw Canal
()
Draw Auto Canal
(
)
Canal Manager
()
Insert Implant
()
Multiple Insert
()
Implant Manager
()
Implant Library
()
Bone Density
()
Collision
Detection
()
Tools
()
Capture
()
Counsel
()
CD/DVD Burnin
g
( CD/DVD) CDDVD
-
3 (Utilization of Basic Functions)
3.5
48 Ez3D plus User Manual
Memory Export
() CD
STL Export
(STL )
STL(3D
)3D
(STL)
Fine Tuning
() 3D
Knowledge Info
()
Setting
()
Help
()
Contents
()
About
()
-
4 (File Management)
4.1 DICOM (DICOM Import)
Ez3D plus User Manual 49
4 (File Management)
4.1 DICOM (DICOM Import)
Ez3D plusDICOM
MenuFileDICOM Import, Import
DICOM Open
Select Folder DICOM Multi
Series Volume Load window
-
4 (File Management)
4.1 DICOM (DICOM Import)
50 Ez3D plus User Manual
Multi Series Volume Load windowDicom
Dicom
FileDICOM Import
Multi Series Volume Load window
Series No Open on the Volume List
DICOM ()
FileDICOM Import
-
4 (File Management)
4.1 DICOM (DICOM Import)
Ez3D plus User Manual 51
4.1.1
Ez3D plus
Tools Setting(Setting)Volume
80%
80% 1 (Z 1/2)
80% 1/2 Z 100
DCM (Data Collection Manager) 50 DCM
80% 2 ( X Y
1/2) 80% X Y
1/2 ( 1/4 )
80% 3 (X Y Z
1/2) 80% X Y Z
1/2
-
4 (File Management)
4.1 DICOM (DICOM Import)
52 Ez3D plus User Manual
Volume of Interest
(memory margin)
VOI
ROI
Z 1/2
X Y 1/2 X Y Z 1/2
-
4 (File Management)
4.1 DICOM (DICOM Import)
Ez3D plus User Manual 53
VOI
(80%)
VOIVOI
-
4 (File Management)
4.2 (Open Project)
54 Ez3D plus User Manual
4.2 (Open Project)
File Open ProjectOpen Project
Project List
(OK)
-
4 (File Management)
4.2 (Open Project)
Ez3D plus User Manual 55
4.2.1
Ez3D plus
(OK)
-
4 (File Management)
4.3 (Save Project)
56 Ez3D plus User Manual
4.3 (Save Project)
Menu File Save ProjectSave Project
Save Project (User Information)
(Comment) (Operator) (OK)
-
4 (File Management)
4.4 (Print)
Ez3D plus User Manual 57
4.4 (Print)
Ez3D plusWindowDICOM DICOM
1 : 1
Menu File PrintPrint
4.4.1 (Window Print)
-
4 (File Management)
4.4 (Print)
58 Ez3D plus User Manual
.
(Selection)Ez3D plus
MPR ()MPR
TMJTMJ
TMJ Right ViewTMJ -
TMJ Left ViewTMJ-
Oblique2D(Oblique Real 2D All Pane)Oblique2D
11 Menu View Oblique
Pano & Scout view ()
PANO
(Cross Section Only) 2D
(Mixed) 2D PANO
Cephalo ViewCephaloCephalo
View Cephalo
(Invert Image)
-
4 (File Management)
4.4 (Print)
Ez3D plus User Manual 59
(Print Setting)
(Calibration)
10mm
10mm (Reference) 10mm 10mm
(Real) (OK)
(Print info)
-
4 (File Management)
4.4 (Print)
60 Ez3D plus User Manual
(Print Setup) (OK)
WindowsWindows
(Page Setup)
Tools Settings Print
(Paper) (Layout)
-
4 (File Management)
4.4 (Print)
Ez3D plus User Manual 61
4.4.3. < >
DICOM
(Print Pages)
(Page)
(Print Preview)
-
4 (File Management)
4.4 (Print)
62 Ez3D plus User Manual
4.4.2 DICOM (DICOM Print)
DICOMWindows
DICOMDICOM
(Check Connection) DICOM
DICOMAdd PrinterDICOM(Application Entity
Title)IP
-
4 (File Management)
4.4 (Print)
Ez3D plus User Manual 63
AETitleDCOM
DICOM
Host Address IP
Medium types ()
Destination
Magnification
Smoothing Type
Orientation
Priority
Trim
Film Size
8X10, 8_5X11, 10X12, 10X14, 11X14,
11X17, 14X14, 14X17, 24X24,
24X30, A4, A3
Session Label
Owner ID
EmptyDen
DICOM (Print Setup) (Print Setup)
DICOM (remote SCP)
(OK)
-
4 (File Management)
4.4 (Print)
64 Ez3D plus User Manual
4.4.3 (Report)
Ez3D plus
Ez3D plus
-
4 (File Management)
4.4 (Print)
Ez3D plus User Manual 65
Ez3D plus
-
4 (File Management)
4.4 (Print)
66 Ez3D plus User Manual
(Setup) (Setup)
11 (Fit-on)
(Fit-on)
-
4 (File Management)
4.4 (Print)
Ez3D plus User Manual 67
-
4 (File Management)
4.4 (Print)
68 Ez3D plus User Manual
(Setup) (Setup) (Sext Box
Setup)
-
4 (File Management)
4.4 (Print)
Ez3D plus User Manual 69
(OK)
124cm 4cm
Ez3D plus
-
4 (File Management)
4.4 (Print)
70 Ez3D plus User Manual
-
4 (File Management)
4.4 (Print)
Ez3D plus User Manual 71
Tools Setting
Print Layout
LOGO (PATIENT)
-
4 (File Management)
4.4 (Print)
72 Ez3D plus User Manual
LOGOLOGOMy
Logo (Clinic Center Information)
-
4 (File Management)
4.4 (Print)
Ez3D plus User Manual 73
My LOGO.
(PATIENT)
-
4 (File Management)
4.4 (Print)
74 Ez3D plus User Manual
(Image)
N M
(Text)
(Edit)
(Report)
(Template)
(Setting)
4.4.1
4.4.1
.
(Page)
-
4 (File Management)
4.5 (Load Layout)
Ez3D plus User Manual 75
4.5 (Load Layout)
Ez3D plus
File Load Layout (Open) Ez3D plus.ini
-
4 (File Management)
4.6 (Save Layout)
76 Ez3D plus User Manual
4.6 (Save Layout)
Ez3D plus
File Save Layout Ez3D plus.ini
-
4 (File Management)
4.7 (Volume Information)
Ez3D plus User Manual 77
4.7 (Volume Information)
File Volume Info
Patient Name
Patient IDID
Dimension( )
Resolution( )
Modality
Description
Memory Usage
-
4 (File Management)
4.8 Ez3D plus (Ez3D plus Closing)
78 Ez3D plus User Manual
4.8 Ez3D plus (Ez3D plus Closing)
Ez3D plus
File Exit
-
5 (Image Processing)
5.1 (Edit)
Ez3D plus User Manual 79
5 (Image Processing)
Ez3D plus
(Edit) (View)(Measure) (Annotation)
(Segmentation)
5.1 (Edit)
5.1.1 (Undo)
File Undo Undo
5.1.2 (Redo)
File Redo Redo
-
5 (Image Processing)
5.1 (Edit)
80 Ez3D plus User Manual
5.1.3 (Delete All)
File Delete All Delete All
overlayoverlay
delete
5.1.4 (Reset)
Edit Reset Reset
( Reset All )MPR( Reset MPR )
(Reset All)( MPR 3D )
MPR(Reset MPR) MPR
-
5 (Image Processing)
5.2 (View)
Ez3D plus User Manual 81
5.2 (View)
(View)(Panning)(Rotating)(Zooming)
(Invert)(Windowing)ColoringOblique 3-D Zoom
5.2.1 (Panning)
(Panning)
(Panning) View Panning(View)
(Panning) ((Single)(All))
(Single)(All) MPR
-
5 (Image Processing)
5.2 (View)
82 Ez3D plus User Manual
-
5 (Image Processing)
5.2 (View)
Ez3D plus User Manual 83
5.2.2 (Rotating)
2D3D (Rotating)
2D 3D
View Rotating (View)
(Rotating)2D3D2D
3D
2DMPR3DMPR
MPR
-
5 (Image Processing)
5.2 (View)
84 Ez3D plus User Manual
-
5 (Image Processing)
5.2 (View)
Ez3D plus User Manual 85
5.2.3 (Zooming)
(Zooming) (Zooming)
View Zooming (View)
(Zooming)(Single)
MPR 3D (All) MPR
-
5 (Image Processing)
5.2 (View)
86 Ez3D plus User Manual
-
5 (Image Processing)
5.2 (View)
Ez3D plus User Manual 87
5.2.4 (Inverting)
(Inverting)
View Invert (View)
(Inverting)
5.2.5 (Windowing)
Width Level (Windowing)
(Windowing) View Windowing (View)
-
5 (Image Processing)
5.2 (View)
88 Ez3D plus User Manual
(Windowing)(Single)(All)
(Single)(All)
MPR
Width
Level
-
5 (Image Processing)
5.2 (View)
Ez3D plus User Manual 89
(Fining Tuning)
8.6 (Fining Tuning)
5.2.6 Coloring
3DOTF (Opacity Transfer Function)Coloring
3D
View Coloring (View)Coloring
3D3D
-
5 (Image Processing)
5.2 (View)
90 Ez3D plus User Manual
ColoringNO ACTIONMPR'No Action'
Coloring
-
5 (Image Processing)
5.2 (View)
Ez3D plus User Manual 91
5.2.7 Oblique
ObliqueMPR2D
View Oblique (View)Oblique
Oblique
Oblique
-
5 (Image Processing)
5.2 (View)
92 Ez3D plus User Manual
MPR
-
5 (Image Processing)
5.2 (View)
Ez3D plus User Manual 93
-
5 (Image Processing)
5.2 (View)
94 Ez3D plus User Manual
5.2.8 3D (3D Zoom)
3D (3D Zoom)
View 3D Zoom (View)3D (3D Zoom)
3D Zoom
3D Zoom
-
5 (Image Processing)
5.2 (View)
Ez3D plus User Manual 95
3DMPR3D
-
5 (Image Processing)
5.2 (View)
96 Ez3D plus User Manual
5.2.9 Cephalo (Premium) Image Reconstruction of a Cephalo Image
View (Premium Version Only)
CephaloCephalo
View Cephalo MPR Cephalo View
Cephalo(View)Cephalo
CephaloCephalo H F A P L R
(H)(F)(A)(P)(L)(R)Cephalo
-
5 (Image Processing)
5.2 (View)
Ez3D plus User Manual 97
CephaloCephalo
CephaloDCM
Windowing ToolMeasure tools()View tools()Zoom()
Pan()2D Rotate(2D )Cephalo MPR
-
5 (Image Processing)
5.2 (View)
98 Ez3D plus User Manual
5.2.10 TMJ (TMJ View)
TMJ (TMJ View) TMJ TMJ
(View) TMJ TMJ
(Axial)(F)
Left/Right AP View
Left/Right LAT-MedLeft / Right AP
TMJ
-
5 (Image Processing)
5.2 (View)
Ez3D plus User Manual 99
()TMJ
TMJ
-
5 (Image Processing)
5.2 (View)
100 Ez3D plus User Manual
TMJ
(Interval)
(Thickness)
(Sectional by Interval)AP View()
(Sectional by Cross)AP View()
-
5 (Image Processing)
5.2 (View)
Ez3D plus User Manual 101
5.2.11 (Study Information)
()
View Study Info (View)Study Info
-
5 (Image Processing)
5.2 (View)
102 Ez3D plus User Manual
-
5 (Image Processing)
5.2 (View)
Ez3D plus User Manual 103
5.2.12 VOI (VOI Overlay)
VOI Overlay VOI
View VOI (View) VOI
3D MPR
-
5 (Image Processing)
5.2 (View)
104 Ez3D plus User Manual
5.2.13 (Tool Bar)
-
5 (Image Processing)
5.3 (Measure)
Ez3D plus User Manual 105
5.3 (Measure)
(Length) (Tapeline)(Angle)Profile(ROI)Area( Volume )
5.3.1 (Length)
[mm] ( Length )
Measure Length(Measure) ( Length )
2D2D
3D 2D3D
-
5 (Image Processing)
5.3 (Measure)
106 Ez3D plus User Manual
2D3D3D3D
3D
-
5 (Image Processing)
5.3 (Measure)
Ez3D plus User Manual 107
5.3.2 (Tapeline)
mm
Measure Tapeline(Measure) (Tapeline)
(Line)
(Curve)
-
5 (Image Processing)
5.3 (Measure)
108 Ez3D plus User Manual
5.3.3 2D Angle
3 4
Measure 2D Angle (Measure)2D Angle
3 (3 Points)
4(4 Points)
-
5 (Image Processing)
5.3 (Measure)
Ez3D plus User Manual 109
-
5 (Image Processing)
5.3 (Measure)
110 Ez3D plus User Manual
5.3.4 3D Angle
3D
Measurement 3D Angle (Measure)(Angle)
3D2D Angle3 Points
MPR2D3D3D3D3D
3D
-
5 (Image Processing)
5.3 (Measure)
Ez3D plus User Manual 111
5.3.5 Profile
2D
Measure Profile (Measure)Profile
-
5 (Image Processing)
5.3 (Measure)
112 Ez3D plus User Manual
5.3.6 (ROI )
2DROI
(Area)(Perimeter)(Pixel Value)(Mean Value)(Maximum
Value)(Minimum Value)(Standard Deviation)
Measure ROI (Measure)ROI
-
5 (Image Processing)
5.3 (Measure)
Ez3D plus User Manual 113
5.3.7 Area
Measure Area (Measure)Area
(Polygon)
(Looped Curve)
Looped Curve
Polygon
-
5 (Image Processing)
5.3 (Measure)
114 Ez3D plus User Manual
5.3.8 (Professional ) Volume (Professional Version Only)
Ez3D plus
(Generate)
(Draw Volume)
-
5 (Image Processing)
5.3 (Measure)
Ez3D plus User Manual 115
(Erase Volume)
-
5 (Image Processing)
5.3 (Measure)
116 Ez3D plus User Manual
(Generate) 3D
3D OTF
OTF
3D
OTF OPAQUE Transfer Function ()
( 8.5 )
( )
-
5 (Image Processing)
5.3 (Measure)
Ez3D plus User Manual 117
( )
( )
-
5 (Image Processing)
5.3 (Measure)
118 Ez3D plus User Manual
()
3D 3G
OTF
3D
-
5 (Image Processing)
5.4 (Annotation)
Ez3D plus User Manual 119
5.4 (Annotation)
5.4.1 (Arrow)
Annotation Arrow(Annotation)(Arrow)
-
5 (Image Processing)
5.4 (Annotation)
120 Ez3D plus User Manual
5.4.2 (Note)
Annotation Note(Annotation)(Note)
-
5 (Image Processing)
5.4 (Annotation)
Ez3D plus User Manual 121
5.4.3 (Free Draw)
Annotation Free Draw (Annotation)(Free Draw)
(Size)
(Color)
(Clear)
(Capture)
(Save Envi)
(Close)
Ez3D plusWindows
Ez3D plus
(OK)
-
5 (Image Processing)
5.5 (Segmentation)
122 Ez3D plus User Manual
5.5 (Segmentation)
5.5.1 (Sculpt)
Segmentation Sculpt (Segmentation) (Sculpt)
-
5 (Image Processing)
5.5 (Segmentation)
Ez3D plus User Manual 123
5.5.2 (Opacity)
Segmentation Opacity (Segmentation) (Opacity)
-
5 (Image Processing)
5.5 (Segmentation)
124 Ez3D plus User Manual
5.5.3 (Threshold)
Segmentation Threshold (Segmentation) (Threshold)
-
5 (Image Processing)
5.5 (Segmentation)
Ez3D plus User Manual 125
5.5.4 (Apply Mask)
3DMPR
Segmentation Apply Mask (Segmentation)
(Apply Mask)
(Apply Overlay) MPR
3D MPR
-
5 (Image Processing)
5.5 (Segmentation)
126 Ez3D plus User Manual
5.5.5 (Reset Mask)
Segmentation Reset Mask (Segmentation) (Reset
Mask)
5.5.6 (Premium ) (Maxillary / Mandible (Premium Version Only))
3D
(Bite)
3DOTF
-
5 (Image Processing)
5.5 (Segmentation)
Ez3D plus User Manual 127
Segmentation Maxillary/Mandible (Segmentation)
(Maxillary/Mandible)OTF
-
5 (Image Processing)
5.5 (Segmentation)
128 Ez3D plus User Manual
(3D) 3D
-
6 (Curve Use)
6.1 (Premuim ) Auto Curve (Premium Version Only)
Ez3D plus User Manual 129
6 (Curve Use)
3D MPR
6.1 (Premuim) Auto Curve
(Premium Version Only)
( )
(Delete Point)
-
6 (Curve Use)
6.1 (Premuim ) Auto Curve (Premium Version Only)
130 Ez3D plus User Manual
( )
( ).
Simulation Curve
Manager
-
6 (Curve Use)
6.2 (Manual Curve)
Ez3D plus User Manual 131
6.2 (Manual Curve)
Simulation Manual(Simulation)(Panoramic
Curve)
X (
)
X ()
X ()
X ()
X ()
-
6 (Curve Use)
6.3 (Cross-sectional View)
132 Ez3D plus User Manual
X ()
X ()
X ()
3D
6.3 (Cross-sectional View)
(Cross-sectional)(Axial)(Panoramic)
3D (3D image views)
3D
-
6 (Curve Use)
6.3 (Cross-sectional View)
Ez3D plus User Manual 133
(Auto Canal Detection) ( )
Cine Player ( )
(Cross-Section all Capture) ( )
(JPEG, DICOM)
(Layout Modification) ( ) 1
1 4 4
(View/Measure Functions)
5 (Image Processing)
-
6 (Curve Use)
6.3 (Cross-sectional View)
134 Ez3D plus User Manual
3D
3D
5 5
-
6 (Curve Use)
6.4 (Professional ) Sectional Detail View (Professional Version Only)
Ez3D plus User Manual 135
6.4 (Professional ) Sectional Detail View
(Professional Version Only)
( )
3D Oblique3D Zoom
-
6 (Curve Use)
6.4 (Professional ) Sectional Detail View (Professional Version Only)
136 Ez3D plus User Manual
9 9
-
6 (Curve Use)
6.4 (Professional ) Sectional Detail View (Professional Version Only)
Ez3D plus User Manual 137
(Sectional)Oblique3D Zoom
(Sectional)Oblique3D Zoom
-
6 (Curve Use)
6.4 (Professional ) Sectional Detail View (Professional Version Only)
138 Ez3D plus User Manual
()
(Sectional)Oblique3D Zoom
Oblique
-
6 (Curve Use)
6.4 (Professional ) Sectional Detail View (Professional Version Only)
Ez3D plus User Manual 139
-
6 (Curve Use)
6.4 (Professional ) Sectional Detail View (Professional Version Only)
140 Ez3D plus User Manual
()
(Sectional)Oblique
3D Zoom
(Sectional)Oblique3D Zoom
-
6 (Curve Use)
6.4 (Professional ) Sectional Detail View (Professional Version Only)
Ez3D plus User Manual 141
2 Ctrl
10
()
-
6 (Curve Use)
6.5 (Curve Manager)
142 Ez3D plus User Manual
6.5 (Curve Manager)
Simulation Curve Manager(Simulation)
(Curve Manager)
-
7 (Simulation)
7.1 (Canal Drawing)
Ez3D plus User Manual 143
7 (Simulation)
7.1 (Canal Drawing)
Ez3D
plus
7.1.1 (Canal Drawing)
Ez3D plus
-
7 (Simulation)
7.1 (Canal Drawing)
144 Ez3D plus User Manual
SimulationDraw Canal(Simulation)(Draw Canal)
-
7 (Simulation)
7.1 (Canal Drawing)
Ez3D plus User Manual 145
MPR 3D
3D (VR)
-
7 (Simulation)
7.1 (Canal Drawing)
146 Ez3D plus User Manual
7.1.2 (Auto Canal Drawing)
6
-
7 (Simulation)
7.1 (Canal Drawing)
Ez3D plus User Manual 147
Simulation Draw Canal Draw Auto Canal(Simulation)
(Draw Auto Canal)
( )
Seed1
-
7 (Simulation)
7.1 (Canal Drawing)
148 Ez3D plus User Manual
-
7 (Simulation)
7.1 (Canal Drawing)
Ez3D plus User Manual 149
-
7 (Simulation)
7.1 (Canal Drawing)
150 Ez3D plus User Manual
7.1.3 (Canal Manager)
Simulation Canal Manager(Simulation)
(Canal Manager)
-
7 (Simulation)
7.2 (Implant)
Ez3D plus User Manual 151
7.2 (Implant)
()
3D3D
7.2.1 (Insert Single Implant)
Simulation Insert Single Implant(Simulation)
(Insert Single Implant)
-
7 (Simulation)
7.2 (Implant)
152 Ez3D plus User Manual
MPR 3D
-
7 (Simulation)
7.2 (Implant)
Ez3D plus User Manual 153
7.2.2 (Insert Multiple Implant)
Simulation Insert Multiple Implant(Simulation)
(Insert Multiple Implant)
(Find Similar Implant)
(Replace)
-
7 (Simulation)
7.2 (Implant)
154 Ez3D plus User Manual
(Hide)
(Remove)
(Go to Center) MPR
(Implant Align)
(Show Bone Density)
(Property)
(abutment)
-
7 (Simulation)
7.2 (Implant)
Ez3D plus User Manual 155
7.2.3 (Implant Manager)
(Select All)
(Show)
(Hide)
(Remove)
(Properties)
-
7 (Simulation)
7.2 (Implant)
156 Ez3D plus User Manual
7.2.4 (Implant Library)
3D (STL)3D
3D
Simulation Implant Library (Simulation)
(Implant Library)
-
7 (Simulation)
7.2 (Implant)
Ez3D plus User Manual 157
(OK)
STL ( STL)
STL ( STL )
STL 3D
STL
STL STL
-
7 (Simulation)
7.2 (Implant)
158 Ez3D plus User Manual
(OK) .
STL
(Apical data)
STL
STL ASCII Binary Ez3D plus
Binary STL
-
7 (Simulation)
7.2 (Implant)
Ez3D plus User Manual 159
7.2.5 (Bone Density)
Simulation Bone Density(Simulation)(Bone Density)
(Outside)
(Inside)
(Apical)
ID (Implant ID)
(Thickness)
-
7 (Simulation)
7.3 (Collision Detection)
160 Ez3D plus User Manual
7.3 (Collision Detection)
Simulation Collision Detection
Tools Setting
(With a Message Box)
(Audio Alert)
(Show Safety Zone)
-
7 (Simulation)
7.3 (Collision Detection)
Ez3D plus User Manual 161
(Boundary)
MPR
-
7 (Simulation)
7.3 (Collision Detection)
162 Ez3D plus User Manual
(Collisions are detected)
MPR 3D
-
7 (Simulation)
7.3 (Collision Detection)
Ez3D plus User Manual 163
(Collisions are detected)
-
8 (Special Functions)
8.1 (Capture)
164 Ez3D plus User Manual
8 (Special Functions)
8.1 (Capture)
( 8.6
) JPEG DICOM DICOM SCU
DICOM SCP (PACS) EasyDent
EasyDent
Tools Capture(Capture)
Tools Capture Single Pane
Tools Capture Full screen
Tools Capture All Panes
-
8 (Special Functions)
8.1 (Capture)
Ez3D plus User Manual 165
DICOM
ToolsSettingSystem(Send to Server)
-
8 (Special Functions)
8.1 (Capture)
166 Ez3D plus User Manual
DICOM
AETitle IP
DICOM
AETitle DICOM (Specific application
name)
IP IP
Port
ID (Patient ID) ID
(Patient Name)
(Patient Birth Date)
(Patient Sex)
(study)
(Merge Previous Study)
DICOM
(study)
-
8 (Special Functions)
8.2 (Counsel)
Ez3D plus User Manual 167
8.2 (Counsel)
8.2.1
Tools Counsel(Counsel)
-
8 (Special Functions)
8.2 (Counsel)
168 Ez3D plus User Manual
Ez3D plus
-
8 (Special Functions)
8.2 (Counsel)
Ez3D plus User Manual 169
8.2.2
-
8 (Special Functions)
8.2 (Counsel)
170 Ez3D plus User Manual
-
8 (Special Functions)
8.2 (Counsel)
Ez3D plus User Manual 171
-
8 (Special Functions)
8.2 (Counsel)
172 Ez3D plus User Manual
8.2.3
-
8 (Special Functions)
8.3 CD/DVD (Professional ) CD/DVD Burning (Professional Version Only)
Ez3D plus User Manual 173
8.3 CD/DVD (Professional) CD/DVD Burning
(Professional Version Only)
CD/DVD
Windows Vista CD/DVD
Windows XP Windows 2003 CD/
DVD
1. Ez3D plus
8.3.1
CD/ DVD CD/DVD CD/DVD
Ez3D plus Logo
logo.avi logo.jpg AVI basic AVI Codec
basic AVI Codec
Tools Export CD/DVD Burning CD/DVD
CD/DVD (OK)
[ 1] CD/DVD
-
8 (Special Functions)
8.3 CD/DVD (Professional ) CD/DVD Burning (Professional Version Only)
174 Ez3D plus User Manual
[ 2] CD/DVD Burn Screen
(Yes) CD/DVD (No)
[ 3] CD/DVD
[ 4] CD/DVD
-
8 (Special Functions)
8.3 CD/DVD (Professional ) CD/DVD Burning (Professional Version Only)
Ez3D plus User Manual 175
CD DVD
CD/DVD
CD/DVD
DICOM
DICOM
(Yes) DICOM
(No)
-
8 (Special Functions)
8.3 CD/DVD (Professional ) CD/DVD Burning (Professional Version Only)
176 Ez3D plus User Manual
8.3.2 - (2D Viewer)
2D
3D
Ez3D plus CD/DVD
3D
(Curve Mode) Ez3D plus
(Panorama Mode) Ez3D plus
3D (3D Mode) Ez3D plus 3D 3D
(Axial Mode) Ez3D plus
4 4
-
8 (Special Functions)
8.3 CD/DVD (Professional ) CD/DVD Burning (Professional Version Only)
Ez3D plus User Manual 177
View
(Pan)
(Zoom) /
(Windowing)
(Magnifier)
(Invert)
(Overlay) /
(Image Info)
Measure
(Length)
(Angle)
(Note)
Edit
(Delete)
(Reset)
Image Process
(Sharp)
(Smooth)
(Color)
Tools (Compare)
-
8 (Special Functions)
8.3 CD/DVD (Professional ) CD/DVD Burning (Professional Version Only)
178 Ez3D plus User Manual
(Export)
(Singled Pane)
(Displayed Pan
e)
(Full Screen)
(To Sever)
(System Info)
-
8 (Special Functions)
8.3 CD/DVD (Professional ) CD/DVD Burning (Professional Version Only)
Ez3D plus User Manual 179
(Pan)
(Zoom)
-
8 (Special Functions)
8.3 CD/DVD (Professional ) CD/DVD Burning (Professional Version Only)
180 Ez3D plus User Manual
(Windowing)
(Magnifier)
-
8 (Special Functions)
8.3 CD/DVD (Professional ) CD/DVD Burning (Professional Version Only)
Ez3D plus User Manual 181
(Invert)
(Overlay)
X
-
8 (Special Functions)
8.3 CD/DVD (Professional ) CD/DVD Burning (Professional Version Only)
182 Ez3D plus User Manual
(Image Info)
(Length)
-
8 (Special Functions)
8.3 CD/DVD (Professional ) CD/DVD Burning (Professional Version Only)
Ez3D plus User Manual 183
(Angle)
(Note)
-
8 (Special Functions)
8.3 CD/DVD (Professional ) CD/DVD Burning (Professional Version Only)
184 Ez3D plus User Manual
(Delete)
(Reset)
(Sharp)
-
8 (Special Functions)
8.3 CD/DVD (Professional ) CD/DVD Burning (Professional Version Only)
Ez3D plus User Manual 185
(Smooth)
(Color)
-
8 (Special Functions)
8.3 CD/DVD (Professional ) CD/DVD Burning (Professional Version Only)
186 Ez3D plus User Manual
(Compare)
3D
(Export)
-
bmp jpg dcm
-
8 (Special Functions)
8.3 CD/DVD (Professional ) CD/DVD Burning (Professional Version Only)
Ez3D plus User Manual 187
-
bmp jpg dcm
-
bmp jpg dcm
-
DICOM
-
8 (Special Functions)
8.3 CD/DVD (Professional ) CD/DVD Burning (Professional Version Only)
188 Ez3D plus User Manual
(System information)
8.3.3 - (3D Viewer)
3D CD/DVD Ez3D plus
- 2D/3D Ez3D plus Ez3D plus
2D/3D
- 2D/3D
Ez3D plus
-
8 (Special Functions)
8.4 () () Memory (Simple Viewer) (Professional Version Only)
Ez3D plus User Manual 189
8.4 () () Memory (Simple
Viewer) (Professional Version Only)
()
Tools Export Memory
Launcher.exe
Launcher.exe Ez3D plus .
-
8 (Special Functions)
8.4 () () Memory (Simple Viewer) (Professional Version Only)
190 Ez3D plus User Manual
Ez3D plus
Ez3D plus Ez3D plus
Ez3D plus
-
8 (Special Functions)
8.5 STL (STL Export)
Ez3D plus User Manual 191
8.5 STL (STL Export)
STL 3D 3D
(Mesh data) (STL )
Tools STL Export
STL OTF
()
OTF
STL
-
8 (Special Functions)
8.5 STL (STL Export)
192 Ez3D plus User Manual
STL STL
STL STL
(25% 50% 75% 100%)
(OK )
STL STL
-
8 (Special Functions)
8.6 (Fine Tuning)
Ez3D plus User Manual 193
8.6 (Fine Tuning)
VR (Opacity) 3D
< 3D >
100 ()
CT (Hounsfield Unit, HU)
CT CT -1000 +1000
(-1000) (0) (+1000)
Tools Fine TuningColoringWindowing
Coloring VR 3D
OTF ()
(Autofit)
(Auto Preset Soft tissue)
(Add Opacity)
(Delete Opacity)
-
8 (Special Functions)
8.6 (Fine Tuning)
194 Ez3D plus User Manual
() (Off Opacity (On Opacity)) 3D OTF
[] OTF
OTF VOI
-
8 (Special Functions)
8.6 (Fine Tuning)
Ez3D plus User Manual 195
4 3
2 3
1 4
3
Windowing
3 ()
()
CRT CT
X
-
8 (Special Functions)
8.6 (Fine Tuning)
196 Ez3D plus User Manual
8.6.1 (Edit Color)
(OK)
-
8 (Special Functions)
8.6 (Fine Tuning)
Ez3D plus User Manual 197
8.6.2 (Load Preset)
(C)
-
8 (Special Functions)
8.6 (Fine Tuning)
198 Ez3D plus User Manual
8.6.3 (Save Preset)
OTF
(C)
(OK)
8.6.4 (Exit)
-
8 (Special Functions)
8.7 () Knowledge Info (Premium Version Only)
Ez3D plus User Manual 199
8.7 () Knowledge Info (Premium Version
Only)
Ez3D plus
Tools Knowledge Info
( )
( ).
-
8 (Special Functions)
8.7 () Knowledge Info (Premium Version Only)
200 Ez3D plus User Manual
-
8 (Special Functions)
8.8 (Setting)
Ez3D plus User Manual 201
8.8 (Setting)
Ez3D plus MPR MPR
Tools Setting(Setting)
-
8 (Special Functions)
8.8 (Setting)
202 Ez3D plus User Manual
8.8.1 (Configuration)
Panorama
Volume
Simulation View
-
8 (Special Functions)
8.8 (Setting)
Ez3D plus User Manual 203
Printer
System
Information
(Panorama)
(Volume) MPR 3D
(Simulation)
(View) 3D
(Print)
-
8 (Special Functions)
8.8 (Setting)
204 Ez3D plus User Manual
(System)
() (Information(Clinic Info))
Panorama
Panorama
Curve
Gap [mm] 1
Thickness
[mm] 2
Width[mm]
() 40
Height [mm]
()
40
(
)
Row () 4
Col () 4
Panorama Imag
e
Gap[mm] Panoramic 1
Thickness[m
m] Panoramic 2
Panoramic Cur
ve Overlay L-B/B-L Overlay
Default Panorama
Panoramic
Volume
MPR Images Thickness
[mm] MPR 2
3D Quality
3D
High/Medium/Lo
w // 3D
Volume Proces
sing On/Off /
Light On/Off /
Default Volume
3D 3D
SimulationImplant
Minimal Occlusal
Dist.
[
mm]
3
Minimal Apical
Dist.
[m
m]
3
Minimal Dist. 3
-
8 (Special Functions)
8.8 (Setting)
Ez3D plus User Manual 205
[mm]
Fixture
Abutment Abutment
Opaque Implant
3D
Canal
Diameter [m
m] 2
Color
Opaque Canal
Bone Density
Collision
Indication(With a
MessageBox/Prod
uce a
Sounds/Show
Safety Zone)
(
//
)
View
Windowing
Value
(
/DCM /User
)
Select(Auto
Fit/DCM
Define/User
Define)
DCM
Annotation
Font (Size/Color)
(/)/
Background Color
Zooming /
Panning /
Windowing
/ /
Apply to all
panels
()
Use Auto fit
Multi Slice
View
Spacing [m
m] 2
Extend [m
m] 1
-
8 (Special Functions)
8.8 (Setting)
206 Ez3D plus User Manual
Direction
Thickness
[mm] 2
Rotation Degree
15
Default View
Print
Paper
Background Color
Text Font Color
Logo & Patient
Layout
Default Box
Box Background
Color
.
Size Width
[mm] 50
Size Height
[mm] 50
Ruler L/R
L/R ()
Ruler T/B
T/B
Sectional index f
ont
Font Background
Color
Default Print
System
Capture Save Option
Performance
Maximum Undo
Disk Space [MB]
[MB]
100
Auto save 1
-
8 (Special Functions)
8.8 (Setting)
Ez3D plus User Manual 207
Frequency
Multiple
Execution
Select (1/2/3)
(1/2/3) 1
Log
Save Option
(Save to File/
Save to Database)
(
/
)
Log Level
Level 1
Language
(
)
Default System
Informatio
n
Clinic Information ()
Browse www.e-woote
ch.com
Default Information
-
8 (Special Functions)
8.8 (Setting)
208 Ez3D plus User Manual
-
9 (Help)
9.1 (Contents)
Ez3D plus User Manual 209
9 (Help)
9.1 (Contents)
Ez3D plus
9.2 () (System Information (About))
-
9 (Help)
9.3 USB (USB Lock Key Information)
210 Ez3D plus User Manual
9.3 USB (USB Lock Key Information)
USB
-
1 Ez3D plus
1.1
Ez3D plus User Manual 211
1 Ez3D plus
1.1
1.1.1
Microsoft Windows XP(SP1) Vista 32bit
Core DUO CPU 1.8GHz
2GB
2GB
1280 x 1024 x 32bpp
1.1.2
Microsoft Windows XP(SP1)
Pentium IV 2.0GHz
512MB
100 MB
1024 x 768 x 32bpp
1024 x 768
-
1 Ez3D plus
1.1
212 Ez3D plus User Manual
1.1.3
Ez3D plus Window Service Pack Internet Explorer
Microsoft MDAC 2.7
Window Service Pack
Windows XP Service Pack 1
Internet Explorer Version 6.0
Microsoft MDAC 2.7
Windows ""
[]
-
1 Ez3D plus
1.1
Ez3D plus User Manual 213
Internet Explorer Internet Explorer
[] Internet Explorer
Windows Internet explorer Ez3D plus
Ez3D plus
Microsoft MDAC
Microsoft
-
1 Ez3D plus
1.2 Ez3D plus
214 Ez3D plus User Manual
1.2 Ez3D plus
Ez3D plus
1.2.1 HASP ()
Ez3D plus HASP
HASP
HASP
USB
1.
2. HASP lmsetup.exe U.S. English (OK)
-
1 Ez3D plus
1.2 Ez3D plus
Ez3D plus User Manual 215
3. (Next)
4. (I accept the license agreement)
(Install)
-
1 Ez3D plus
1.2 Ez3D plus
216 Ez3D plus User Manual
5. (Service) [nhsrvice.exe] (Next)
6. (Next)
-
1 Ez3D plus
1.2 Ez3D plus
Ez3D plus User Manual 217
7. (Next)
8. HASP
HASP USB
-
1 Ez3D plus
1.2 Ez3D plus
218 Ez3D plus User Manual
1.2.2 Ez3D plus
Windows XP/Windows Vista Ez3D plus
1. Ez3D plus (Next)
2. (I accept) (Next)
-
1 Ez3D plus
1.2 Ez3D plus
Ez3D plus User Manual 219
3. (Next)
4. Ez3D plus
-
1 Ez3D plus
1.2 Ez3D plus
220 Ez3D plus User Manual
5. Ez3D plus CT
Console Ez3D plus Workstation (Next)
6. C:\Ez3D2009
-
1 Ez3D plus
1.2 Ez3D plus
Ez3D plus User Manual 221
7. Ez3D plus (Install)
8.
-
1 Ez3D plus
1.2 Ez3D plus
222 Ez3D plus User Manual
9. (Finish)
10. Windows Update
CD/DVD CD/DVD
Windows Vista
Windows XP ServicePack2, 3 / Windows 2003 SP2
[] Window Update
-
1 Ez3D plus
1.2 Ez3D plus
Ez3D plus User Manual 223
1.2.3
Windows XP/Windows Vista
1. DB.zip
2. DB.exe DB
-
1 Ez3D plus
1.2 Ez3D plus
224 Ez3D plus User Manual
3. Ez3D plus DB (Extract) (
Ez3D plus)
4. (OK)
1.2.4
Ez3D plus Ez3D plus C:\Ez3D plus\Ez3D plus.exe.
Ez3D plus
-
1 Ez3D plus
1.2 Ez3D plus
Ez3D plus User Manual 225
1.2.5
Ez3D plus C:\Ez3D2009
Ez3D plus
Ez3D plus
Temporary storage file folder
User configuration set up folder
Main execution folder of Ez3D plus
-
2 Ez3D plus
226 Ez3D plus User Manual
2 Ez3D plus
Ez3D plus
1. Windows (Windows 2000 )
2.
3. Ez3D plus .
[] Ez3D plus
4. (Yes)
[]
-
2 Ez3D plus
Ez3D plus User Manual 227
5. (Finish)
[]
Ez3D plus (DICOM
)
-
3 DICOM
3.1 DICOM
228 Ez3D plus User Manual
3 DICOM
Ez3D plus DICOM DICOM
3.1 DICOM
Digital Image and Communication in Medicine Standard (DICOM )
DICOM
(CT) (MR) (PET) X
(CR) (HIS/RIS)
DICOM ()
(
-
3 DICOM
3.2 Ez3D plus DICOM
Ez3D plus User Manual 229
3.2 Ez3D plus DICOM
3.3 Ez3D plus DICOM
DICOM
DICOM 4.4.2 DICOM
Ez3D plus
-
3 DICOM
3.4 DICOM
230 Ez3D plus User Manual
3.4 DICOM
Ez3D plus AE Title IP () (alias)
DICOM Ez3D plus AE Title
AE Title IP ()
IP
(IP) TCP/IP
IP (
192.168.1.1)
IP
DICOM IP
IP
TCP/IP DICOM
104 Ez3D plus
Port 104
AETitle
AE Title (Application Entity Title )
DICOM DICOM ID AE Title
DICOM
3.5 AE TitleIP
Ez3D plus DICOM 8.8
DICOM (IP ) AE Title