corrugated panel china jixiang group中国吉祥外贸资料(aluminum corrugated panel)accp
TRANSCRIPT
Add:No.2188,Songzheng Road,Songjiang District,Shanghai China (P.C.201604)
Tel: (+86)21-57752020 Fax: (+86)21-57752020
www.alusunbond.com
CHINA •JIXIANG GROUPShanghai Jixiang Industry Co., Ltd.
ALUMINIUM CORRUGATED COMPOSITE PANEL
Shanghai·China
01AlusunBOND
ABOUT US
Shanghai Jixiang Industry Co., Ltd is a subsidiary of CHINA JIXIANG
GROUP, with a total investment of 80 million USD . We are specialized in
manufacturing wall cladding materials such as Aluminum Corrugated
Panel ,Aluminum Plastic Composite Panel, Aluminum Color Coated Coil,Alumi-
num Solid Panel etc.The company was certi�ed with ISO9001:2008 in Quali-
ty Management Systems, ISO14001: 2004 in Environmental Management
Systems and OHSAS18001:1999 for Occupational Health and Safety. The
quality of our products are conformed to the standard of ASTM-E84,
EN13501-1 and BS-476.
We have become one of the biggest Aluminum Decoration Materials
manufacturers in China .
02AlusunBOND
ALUSUNBOND is a contemporary composite panel
product with single corrugated aluminium sheet as
core and manufactured through a continuous lami-
nation process involving superb adhesive.
◆ Protective �lm
◆ PVDF Coated Aluminium Skin
◆ Adhesive Layer
◆ Aluminium Corrugated Core
◆ Adhesive Layer
◆ Service coated/Mill Finished Aluminum Skin
03AlusunBOND
ADVANTAGES
Comparative table of metal exterior
Secondary operation of Aluminum corrugated composite Panel
Durable
Economic
Heat-Insulation
Non-Combustible
Light Weight
Eco Friendly
Sound Insulation
Cutting Grooving Shaping
Item ALU.Plastic Composite panel Alu. Solid Panel (3mm) Alu.Corrugated composite panel
Material
Thickness
Weight
Light Weight
Fire Proof
0.5mm (Skin)
4mm
5.8kg/m2
Good
Normal
3.0mm al.solid panel
3.0mm
8.1kg/m2
Normal
Good
0.8mm 、0.6mm al.core
6mm、4mm
4.3kg/m2、3.7kg/m2
Excellent
Good
04AlusunBOND
Aluminum Alloy Sheets
Typical Composition Of Aluminum Composite Panel (Diagramatic Representation)
COMPOSITION
PRODUCT DIMENSION
COATING FINISHESAluminium Coil alloy (3003 Series) coated with KYNAR®500 based Fluorocarbon (PVDF utilizing a minimum 70% KDF
resin). PVDF Coating system offers Two or Three Layer coating depending on color selection such as Metallic colors
and Normal RAL Colors. Metallic Colors are normally Three (3) coat system consisting of a Primer, Color and Clear Top
coat. Normal RAL colors usually have Two (2) coat system composed of Primer and Color Coat.
Two sheets of aluminium sandwiching a
corrugated Aluminum core formed in a
continuous lamination process.
Surface of panel is Aluminium Sheet
Coated with PVDF and back side of
Panel with primer.
Alusunbond is available in various dimensions, however, our standard
Product is 4mm × 1250mm × 2440mm
Other available sizes are as follows:
Alloy: AA3003 Series (PVDF Painted material)
Core material : AA3003 Series
1. TOP SKIN: 0.6MM/0.8MM±0.02MM
2. MODIFIED EPOXY THERMO-SETTING GLUE
3. core:0.3MM+-0.02MM(PITCH3.1MM/4.8MM+-0.1MM)
4.BOTTOM SKIN:0.3/0.4MM+-0.02MM
Dimension Unit Standard Size Available
Width
Length
Thickness
mm
mm
mm
1250
2440
6
1000-1500
≤10000mm
4、6、10
05AlusunBOND
PARAMETERS
COLOR CARD
Test Type Testing conditionQuality Standards
Polyester PVDFRemarks
Color
Gloss
Pencil Hardness
Coating Thickness
Adhesion Test (Dry)
MEK Testing
Heating Resistance
Weather Resistance
(Q-UV Test)
Base Metal
1.By Eye
2.Color meter
Gloss meter 60
2H
Positector
Gross cut
Rub MEK soaked piece of Cloth
170℃ × 1Hr
DEW Cycle UV Test 60℃ 4 Hr
+ 50℃ 4hr condensation ×3
OK With In range
△E=1.0 or less
20-70%
Passed
16 micron ±3
100/100
30 times
△E=1.5 or less
△E=2.0 or less
White Color
Aluminum
OK With In range
△E=1.0 or less
25-80%
Passed
25 micron ±2
5 micron ±3
100/100
100 times
△E=1.5 or less
△E=2.0 or less
Aluminum
Forced/Natural Abrasion
PE-1000hr
PVDF-5000hr
Color of Aluminium Corrugated Panel
Solid & Metallic
Marble & Granite
Wood Grain
06AlusunBOND