wwwwww..ccoorrtteeccoo..ccoomm

SSiilliiccoonnee sseeaalliinngg ppaassttee ccoouunntteerr ddiissppllaayy

HHTT330000KK

OOppeenn iitt aanndd rreellaaxx.. The easiest way to sellthe silicone pasteCORTECO. EEaassyy ttoo uussee,the counter display isavalaible with the 3colors

Contains 1188 ttuubbeess of 80ml

HT300CCCoommppoossiittiioonn::100% silicone elastomer mono compound, vulcanises atroom temperature under normal atmospheric condi-tions. - Color : Black- Elongation at break: 250 %- Time for skin to form: about 9mins.- Retains inherent properties even at - 65 to +275 °C (300 °C for limited duration).

EExxaammpplleess ooff uussee::Mainly for automotive applications. Wherever extreme resistancerequired to oil leaks and high temperatures in modern engines withsteel or aluminium case (sumps, cylinder heads, oil pumps, differen-tials etc).

Easily adapts to uneven or irregular surfaces.

Very high resistance to coolants and chemicals.

Used by car manufacturers.

CORTECO HT PROFESSIONALSILICONE SEALING PASTEHT300C - 300°C- BLACK

DDeessccrriippttiioonn::HT CORTECO range is a mono-component silicone elastomerwhich cures at room tempera-ture: acetic, non flowing, adhe-sive, very good extrusion.

AApppplliiccaattiioonnss::It is mainly attended for profes-sional customers as a flexiblebonding agent to provide sea-ling, bonding and protection,etc.Its elongation/break propertiesallow it to absorb significantdifferential dilatation move-ment.• Sealing & Bonding in indus-trial sector• Bonding of HCR silicones.

• General servicing and main-tenance applications invarious sectors: automotive,chemicals, industry, aeronau-tic...

AAddvvaannttaaggeess ::• Good dielectric properties.• Adhesion to many surfaces.• Resists water and humidity.• Quick curing.• High elongation break.

CCuurriinngg::Curing of HT CORTECO startsas soon as the product isbrought into contact withatmospheric humidity.The curing rate increases withtemperature and hygrometry.

AAddhheessiioonn pprrooppeerrttiieess::Primerless self-adhesion on :glass, enamel, ceramics, epoxypaint, polyester, certain metals.Avoid too humid heat condi-tions for best results on metaland polyester.

PPrroocceessiinngg::Processing is particularly easy,since the product is deliveredready to use. Application caneither be carried out manuallyor using automated applicationequipment.

HT CORTECO bead is applied toone of two joint surfaces.

Assembly must be carried outbefore the product has formeda skin. It is recommend to apply

HT CORTECO on clean and drysurfaces.

SSaaffeettyy::Please consult the Safety DataSheet of HT CORTECO.