cover - parts express · 7505(a) cover_cover.qxp 2010-10-14 오전 10:25 페이지 1. e n g l i sh...

RD-7505AUDIO / VIDEO RECEIVER

OPERATING INSTRUCTIONS

7505(A) cover_cover.qxp 2010-10-14 오전 10:25 페이지 1

EN

GLI

SH

2

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings.Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators,heat registers, stoves, or other apparatus (includingamplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized orgrounding-type plug. A polarized plug has two bladeswith one wider than the other.A grounding type plug has two blades and a thirdgrounding prong. The wide blade or the third prong areprovided for your safety. If the provided plug does not fitinto your outlet, consult an electrician for replacement ofthe obsolete outlet.

10. Protect the power cord from being walked on or pinchedparticularly at plugs, convenience receptacles, and thepoint where they exit from the apparatus.

11. Only use attachments/accessories specified by themanufacturer.

12. Use only with the cart, stand, tripod, bracket, or tablespecified by the manufacturer, or sold with theapparatus.When a cart is used, use caution when moving thecart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or whenunused for long periods of time.

14. Refer all servicing to qualified service personnel.Servicing is required when the apparatus has beendamaged in any way, such as power-supply cord orplug is damaged, liquid has been spilled or objects havefallen into the apparatus, the apparatus has beenexposed to rain or moisture, does not operate normally,or has been dropped.

PORTABLE CART WARNING

RD-7505(A)_ENG_101115_RD-7505(A)_ENG 2010-11-16 오전 10:36 페이지 2

EN

GLI

SH

3

Introduction

FOR YOUR SAFETY

CAUTION

: TO REDUCE THE RISk OF FIRE OR ELECTRIC SHOCk, DO NOT ExPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This symbol is intended to alert the user to the presence ofuninsulated "dangerous voltage" within the product'senclosure that may be of sufficient magnitude to constitutea risk of electric shock to persons.

This symbol is intended to alert the user to the presence ofimportant operating and maintenance (servicing)instructions in the literature accompanying the appliance.

Caution regarding installationNote : For heat dispersal, do not install this unit in a confined space such as a bookcase or similar enclosure.

: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICEPERSONNEL.

CAUTION

WARNING

Do not block ventilation openings or stack other equipment on the top.

ON / STANDBY AUTO / MANUAL SURROUND STEREO VIDEO AUDIO

SOUND INPUT

AUDIO ASSIGNSPEAKER

ON / OFF

TONE CH.LEVEL SETUP ENTER / MEMO BANDPRESETTUNEPHONES

SETUP MIC F.AUX

POWER

AUDIO / VIDEO RECEIVER RD-7505

Bluetooth IN

RETURN MAIN MENU

MASTER VOLUMESTANDBY

READ THIS BEFORE OPERATING YOUR UNIT

Note to CATV System Installer :This reminder is provided to call the CATV systeminstaller’s attention to Article 820-40 of the NEC thatprovides guidelines for proper grounding and, inparticular, specifies that the cable ground shall beconnected to the grounding system of the building, asclose to the point of cable entry as practical.

FCC INFORMATIONThis equipment has been tested and found to complywith the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmfulinterference in a residential installation. This equipmentgenerates, uses and can radiate radio frequencyenergy and, if not installed and used in accordancewith the instructions, may cause harmful interference toradio communications. However, there is no guaranteethat interference will not occur in a particularinstallation. If this equipment does cause harmfulinterference to radio or television reception, which canbe determined by turning the equipment off and on, theuser is encouraged to try to correct the interference byone or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and

receiver.• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV

technician for help.Caution : Any changes or modifications in construction

of this device which are not expresslyapproved by the party responsible forcompliance could void the user’s authority tooperate the equipment.

This Class B digital apparatus complies with CanadianICES-003.Cet appareil numérique de la Classe B est conforme àla norme NMB-003 du Canada.

Units shipped to the U.S.A and CANADA are designed foroperation on 120 V AC only.Safety precaution with use of a polarized AC plug.However, some products may be supplied with a nonpolarized plug.

U.S.ACANADA

120 V

• Leave a space around the unit for sufficient ventilation.• Avoid installation in extremely hot or cold locations, or in an area

that is exposed to direct sunlight or heating equipment. • Keep the unit free from moisture, water, and dust.• Do not let foreign objects in the unit.• The ventilation should not be impeded by covering the ventilation

openings with items, such as newspapers, table-cloths, curtains, etc.• No naked flame sources, such as lighted candles, should be

placed on the unit.• Please be care the environmental aspects of battery disposal.• The unit shall not be exposed to dripping or splashing for use.• No objects filled with liquids, such as vases, shall be placed on

the unit.• Do not let insecticides, benzene, and thinner come in contact with

the set.• Never disassemble or modify the unit in any way.■Notes on the AC power cord and the wall outlet.• The unit is not disconnected from the AC power source(mains) as

long as it is connected to the wall outlet, even if the unit has beenturned off.

• To completely disconnect this product from the mains, disconnectthe plug from the wall socket outlet.

• When setting up this product, make sure that the AC outlet youare using is easily accessible.

• Disconnect the plug from the wall outlet when not using the unitfor long periods of time.

: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

: Pour éviter chocs électriques, introduire la lame laplus large de la fiche dans la borne correspondantede la prise et pousser jusqu’ au fond.

CAUTION

ATTENTION


EN

GLI

SH

5

System Connections• Please be certain that this unit is unplugged from the AC outlet before making any connections.• Since different components often have different terminal names, carefully read the operating instructions of the component

connected.• Be sure to observe the color coding when connecting audio, video and speaker cords.• Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver.

COAX 2(AUX)

COAX 1(V2)

OPT 2(CD)

OPT 1(V1)

R L R L R L

ASSIGNABLE

VIDEO 3

VIDEO 2

VIDEO 1

VIDEO 1 AUX VIDEO 3

SUBWOOFERPREOUTROOM 2R L

L

R

L

R

CD VIDEO 1

IN

IN

ININ

OUT

OUT

VIDEO 1 VIDEO 1

MONITOROUT

VIDEO SPEAKERSANTENNAAUDIODIGITAL INHDMI

MONITOROUT

FM 75

GND

AMLOOP

SN.

AVIS : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.WARNING : SHOCK HAZARD-DO NOT OPEN.

POWER SOURCEPOWER CONSUMPTION

AUDIO/VIDEO RECEIVER

RD-7505

OUT

FRONT(6 )

SURROUND(6 )

CENTER(6 )

SURROUND BACK / F.HEIGHT / ROOM 2 / BiAMP

(6 )

OUT

VIDEO 2(iPod)

VIDEO 2(iPod)

DIGILINK-i

120V 60Hz2.5 A

DESIGNED IN USAMADE IN CHINA

Class 2 Wiring

SIRIUS

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks & the DTS logos are trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

E308916 48W3Audio/VideoApparatus

11 9 82 3

2 11 4 3 2 1 2 6 7 7, 8

5 10

1. CONNECTING ANTENNAS

ANTENNA

FM 75

GND

AMLOOP

ANTENNA

FM 75

GND

AMLOOP

• Change the position of the FM indoor antenna until you getthe best reception of your favorite FM stations.

ANTENNA

FM 75

GND

AMLOOP

• Place the AM loop antenna as far as possible from the receiver, TV set, speaker cords and the ACinput cord and set it to a direction for the best reception.

• If the reception is poor with the AM loop antenna, an AM outdoor antenna can be used in place ofthe AM loop antenna.

• A 75Ω outdoor FM antenna may be used to furtherimprove the reception. Disconnect the indoorantenna before replacing it with the outdoor one.


EN

GLI

SH

6

OUT

VIDEO 1

MONITOROUT

VIDEOHDMI

MONITOROUT

OUT

VIDEO 2

VIDEO 1

VIDEO 1 AUX VIDEO 3

L

R

L

R

CD VIDEO 1

IN

IN

ININ

OUT

VIDEO 1 VIDEO 1

MONITOROUT

VIDEOAUDIO

OUT

VIDEO 2(iPod)

VIDEO 2(iPod)

2. CONNECTING VIDEO COMPONENTS

• The jacks of VIDEO 1 may also be connected to a DVD recorder or other digital video recording component. For details, refer to the operating instructions of the component to be connected.

• The jacks of VIDEO 2/VIDEO 3 can also be connected to an additional video component such as a cable TV tuner or satellitesystem.

• Connect the jacks of VIDEO 3 to the video component in the same way.The VIDEO INs can be connencted to an additional video component without (composite) video connection.

• There are (composite) VIDEO jacks for analog video connections and the HDMI connectors for digital video and audioconnections.

• For your reference, the excellence in picture quality is as follows : "HDMI” > "(composite) VIDEO".

■Notes :• When recording video program sources through the (composite) VIDEO 1 OUT jack or viewing video program sources

through the (composite) MONITOR OUT jack, you must connect the (composite) VIDEO IN jack to the video playbackcomponents such as BD player, DVD player, etc.

• You can connect Apple iPod to this receiver via Sherwood iPod dock. If Sherwood iPod dock is connected to DIGILINK-i jackfor system control, you should connect its video and audio jacks to the “VIDEO 2” jacks of this receiver. Because, when youcontrol your iPod with the unit’s remote control, the VIDEO 2/iPod is automatically selected as an input source and thecorresponding operation is performed.


EN

GLI

SH

7

■HDMI (High Definition Multimedia Interface) connection : (*)• You can connect the source component (DVD player, etc.) to the display component (TV, projector, etc.) through this receiver

with using a commercially available HDMI cord.• The HDMI connection can carry uncompressed digital video signals and digital audio signals.• The HDMI video stream signals (video signals) are theoretically compatible with DVI-D. When connecting to a TV monitor,

etc., equipped with DVI-D connector, it is possible to connect using a commercially available HDMI-DVI converter cord. Since the HDMI-to-DVI connection cannot carry any audio signals, set the HDMI AUDIO OUT to AMP to hear the HDMI digitalaudio signals on this receiver.(For details, refer to "When selecting the HDMI AUDIO OUT" on page 53.)

■Copyright protection system• This unit supports HDCP (High-bandwidth Digital Contents Protection), technology to protect copyright of digital video signals

against illegal duplication. HDCP must also be supported on the components connected to this unit.• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing

LLC.

■Notes : • For stable signal transfer, we recommend using HDMI cables that are a maximum of 5 meters in length.• Among the components that support HDMI, some components can control other components via the HDMI connector. For details on the HDMI function, refer to “CONFIRMING THE HDMI FUNCTION” on page 35 and “SETTING THE HDMI” onpage 53.

• The audio signals from the HDMI connector (including the sampling frequency and bit length) may be limited by thecomponent that is connected.

• The video signals will not be output properly if a component incompatible with HDCP is connected.• If the resolutions of the video signals which are output from the MONITOR OUTs and your monitor TV are not matched, the

picture is not clear, natural or displayed. In this case, change the setting of the resolution on the source component (BDplayer, etc.) to one which the monitor TV can handle. (For details, refer to the operating instructions of the source component.)

• When you want to enjoy only the picture on your TV, not the sound, you should set the HDMI AUDIO OUT to AMP not tooutput the digital audio signal from the HDMI MONITOR OUT of this receiver. (For details, refer to "When selecting the HDMIAUDIO OUT" on page 53.)

VIDEO 1 AUX

CD VIDEO 1

OUT

AUX Tape deck, MD player, etc.

CD player

3. CONNECTING AUDIO COMPONENTS

• The AUX INs can be connected to an additional audio component such as a tape deck, an MD player, etc.• When recording audio signals, connect the AUDIO IN/OUT jacks of “VIDEO 1” to audio recording equipment such as a tape

deck, an MD recorder, etc.

Continued


EN

GLI

SH

8

5. CONNECTING SUBWOOFER PREOUT

• To emphasize the deep bass sounds, connect a powered subwoofer.

SUBWOOFERPREOUT

6. CONNECTING FOR SYSTEM CONTROL

• Connect this jack to the DIGILINK-i jack of Sherwood iPod dock that allows you to control the iPod with the unit’s remote control.

DIGILINK-i

4. CONNECTING DIGITAL INS

• The OPTICAL and the COAXIAL DIGITAL OUTs of the componentsthat are connected to this unit can be connected to these DIGITALINs.

• A digital input should be connected to the components such as aCD player, DVD player, etc. capable of outputting DTS DigitalSurround, Dolby Digital or PCM format digital signals, etc.

• For details, refer to the operating instructions of the componentconnected.

• When making the COAXIAL DIGITAL connection, be sure to use a75Ω COAXIAL cord, not a conventional AUDIO cord.

• Some of the commercially available optical fiber cords cannot beused for the equipment. If there is an optical fiber cord which cannotbe connected to your equipment, consult your dealer or nearestservice organization.

■Note :• Be sure to make either a OPTICAL or a COAXIAL DIGITAL

connection on each component. (You don’t need to do both.)

■Digital input default settings• If you connect the DIGITAL INs to your components, it is easier to do so following the default settings.• If your DIGITAL connections are different from default settings, you should assign the DIGITAL INs you used with the “When

selecting the AUDIO ASSIGN” procedure on page 41.• The default settings are as follows : OPTICAL IN1 : VIDEO 1, OPTICAL IN2 : CD, COAXIAL IN 1 : VIDEO 2/iPod, COAXIAL IN 2 : AUX

COAX 2(AUX)

COAX 1(V2)

OPT 2(CD)

OPT 1(V1)

ASSIGNABLE

DIGITAL IN


EN

GLI

SH

9

7. CONNECTING SPEAkERS

R L R L R L

SPEAKERS

FRONT(6 )

SURROUND(6 )

CENTER(6 )


(6 )

R L R L R L

SPEAKERS

FRONT(6 )

SURROUND(6 )

CENTER(6 )


(6 )

Class 2 Wiring

Class 2 Wiring

Surround back/Front height/

ROOM 2 right

Surround back/Front height/ROOM 2 left

• Be sure to connect speakers firmly and correctlyaccording to the channel(left and right) and thepolarity(+ and -). If the connections are faulty, no soundwill be heard from the speakers, and if the polarity ofthe speaker connection is incorrect, the sound will beunnatural and lack bass.

• For installing the speakers, refer to "Speakerplacement" on page 10.

• After installing the speakers, first adjust the speakersettings according to your environment and speakerlayout.(For details, refer to "SETTING THE SPEAKER/ROOMEQ" on page 42.)

※ The SURROUND BACK channels can be connectedto surround back speakers, front height speakers,ROOM 2 speakers or bi-amp capable speakers asfollows.

• Depending on how to use the speakers, you shouldassign the power amplifier correctly. (For details, referto “When selecting the AMP ASSIGN” on page 38.)

■Surround back speakers• When using only one surround back speaker, you

should connect it to SURROUND BACK LEFT channel.

■Front height speakers• When listening in Dolby Pro Logic IIz mode, connect

the front height speakers.

■ROOM 2 speakers• For ROOM 2 playback, connect the ROOM 2

speakers. (For details, refer to “CONNECTING ROOM2 OUT JACKS OR ROOM 2 SPEAKER TERMINALS”on page 11.)

■Front Bi-Amp Connections. • Some speakers are equipped with two sets of input

terminals, for bi-amplification. • Connect the FRONT and the SURROUND BACK

channels to the bi-amp-capable speakers. (For details,refer to the operating instructions of your bi-amp-capable speakers.)

■Note : • Before making bi-amp connections, remove the short-

circuiting bars from the terminals of your speakers.

Caution :• Be sure to use the speakers with the impedance of 6

ohms or above.• Do not let the bare speaker wires touch each other or

any metal part of this unit. This could damage this unitand/or the speakers.

• Never touch the speaker terminals while the AC inputcord is connected to the wall AC outlet. Doing so couldresult in electric shocks.


EN

GLI

SH

Ideal speaker placement varies depending on the size ofyour room and the wall coverings, etc. The typical exampleof speaker placement and recommendations are as follows:

■Front left and right speakers and center speaker• Place the front speakers with their front surfaces as flush

with TV or monitor screen as possible.• Place the center speaker between the front left and right

speakers and no further from the listening position thanthe front speakers.

• Place each speaker so that sound is aimed at the locationof the listener’s ears when at the main listening position.

■Surround left and right speakers• Place the surround speakers approximately 60 to 90 cm (2

to 3 feet) above the ear level of a seated listener on thedirect left and right of them or slightly behind.

■Surround back left and right speakers• Place the surround back speakers at the back facing the

front at a narrower distance than front speakers.• When using a single surround back speaker, place it at

the rear center facing the front at a slightly higher position(0 to 20 cm ) than the surround speakers.

• We recommend installing the surround back speaker(s) ata slightly downward facing angle. This effectively preventsthe surround back channel signals from reflecting off theTV or screen at the front center, resulting in interferenceand making the sense of movement from the front to theback less sharp.

■Subwoofer• The subwoofer reproduces powerful deep bass sounds.Place a subwoofer anywhere in the front as desired.

■Front height left and right speakers (Recomended for Dolby Pro Logic IIz playback)

• Place the front height speakers at least 1 meter (3.3 feet)directly above the front speakers.

■Notes :• When using a conventional TV, to avoid interference with

the TV picture, use only magnetically shielded front left and right and center speakers.

• To obtain the best surround effects, the speakers exceptthe subwoofer should be full range speakers.

Speaker placement

11 12

13

10

Continued

■Connecting speaker wire

1. Strip away approx. 10 mm(3/8 inch) of wire insulation,then twist the wire endstight.

2. Loosen by turning thespeaker terminal counter-clockwise.

3. Insert the bare part of thewire.

4. Tighten by turning itclockwise.

1. TV or Screen2. Front left speaker3. Subwoofer4. Center speaker5. Front right speaker6. Surround left speaker7. Surround right speaker

8. Surround back left speaker9. Surround back right speaker10. Surround center speaker11. Front height left speaker12. Front height right speaker13. Listening position

At least 1 m

Front height speaker

Point slightlydownward

• 5.1 channel speaker system :- front(2,5), center(4), surround(6,7), subwoofer(3)

• 6.1 channel speaker system :- 5.1 channel speaker system + surround center(10)

• 7.1 channel speaker system :- 5.1 channel speaker system + surround back(8,9)

• 7.1 channel speaker system(for Dolby Pro Logic IIz playback) :- 5.1 channel speaker system + front height(11,12)


EN

GLI

SH

11

• ROOM 2 playback feature allows you to play a different program source in another room as well as one source in the mainroom at the same time.

• For ROOM 2 playback, connect the ROOM 2 OUT jacks to the amplifier installed in another room, or connect the ROOM 2speaker terminals to the speakers.

• To drive the speakers connected to the ROOM 2 speaker terminals, you should assign the power amplifier to “ROOM 2”. (Fordetails, refer to “When selecting the AMP ASSIGN” on page 38.)

■Note :• To minimize hum or noise, use high quality connection cords.

8. CONNECTING ROOM 2 OUT JACkS OR ROOM 2 SPEAkER TERMINALS

R L


(6 )

ROOM 2R L

OUT

Class 2 Wiring

Another room(Room 2)


12

10. AC INPUT CORD

• Plug the cord into a wall AC outlet.

11. TERMINALS FOR UPGRADES

• These terminals may be used in the future to update the operating software so that it will be able to support new digital audioformats, etc.

■Note :• Programming for upgrades requires specialized programming knowledge and for that reason we recommend that it only be

done by qualified installers.

SIRIUS

• Connect the SIRIUS connector to the Sirius ConnectHome Tuner kit (sold separately).

• Position the Home Tuner antenna near a south-facingwindow to receive the best signal.When making connections, also refer to the operatinginstructions of the SiriusConnect Home Tuner.

• To listen to SIRIUS Satellite Radio, refer to "SIRIUSSatellite Radio (only for North America)" on page 28.

9. CONNECTING SIRIUS CONNECTOR (only for North America)

■Positioning the antenna• For a consistent satellite signal, the antenna must be

positioned correctly. Use the following map to determinewhich area you are in and position the antennaaccordingly.

• Area 1 : Point the antenna toward the sky in the east,notrtheast, or southeast, either through a window oroutside.

• Area 2 : Point the antenna toward the sky in the northor northeast, either through a window or outside.

• Area 3 : Point the antenna toward the sky in the northor northwest, either through a window or outside.

• Area 4 : Point the antenna toward the sky in the west,northwest, or southwest, either through a window oroutside.

• Area 5 : Put the antenna outside and point it straightup. The antenna cannot be used indoors.

SiriusConnect Home Tuner

To a wall ACoutletE

NG

LIS

H


13

Front Panel Controls


SOUND INPUT

AUDIO ASSIGNSPEAKER

ON / OFF


SETUP MIC F.AUX

POWER


Bluetooth IN

RETURN MAIN MENU


6 81 2

9 10 11 13 1514 16 17 18 19 20 21 22 23 24

73 4 12 5

■FLUORESCENT DISPLAY

1. Input, frequency, volume level, operatinginformation, etc.

2. Surround mode indicators3. AUTO indicator4. DIGITAL INPUT indicator5. DIRECT indicator6. Preset number, sleep time display

7. MEMORY indicator 8. PRESET indicator9. SLEEP indicator

10. TUNED indicator11. STEREO indicator12. HDMI indicator13. ROOM 2 indicator

1. POWER switch2. STANDBY indicator 3. POWER ON/STANDBY button4. REMOTE SENSOR 5. FLUORESCENT DISPLAY

For details, see below.6. VIDEO INPUT SELECTOR button7. AUDIO INPUT SELECTOR button8. MASTER VOLUME knob 9. HEADPHONE jack

10. SETUP MIC jackFor details, see next page.

11. FRONT AUX IN jack For details, see next page.

12. AUTO/MANUAL button

13. SURROUND MODE UP/DOWN(▶/◀) buttons 14. STEREO button 15. SPEAKER button 16. AUDIO ASSIGN button 17. TONE MODE button18. CHANNEL LEVEL button19. SETUP button20. ENTER/MEMORY button 21. TUNING UP/DOWN(+/-),

CURSOR LEFT/RIGHT(◀/▶) buttons22. PRESET UP/DOWN(+/-),

CURSOR UP/DOWN(▲/▼) buttons23. BAND button 24. Bluetooth IN connector

For details, see next page.

EN

GLI

SH


EN

GLI

SH

14

SETUP MIC

Microphone

• To use Auto Setup function, connect the supplied microphone to the SETUP MIC jack.(For details, refer to "Whenselecting the AUTO SETUP" on page 42.)

■Notes:• Because the microphone for Auto Setup is designed for use with this receiver, do not use a microphone other than

the one supplied with this receiver.• After you have completed the auto setup procedure, disconnect the microphone.

■SETUP MIC JACk

F.AUX

• The FRONT AUX IN jack can be connected to additional audio components such as an MP3 player, etc.

■Note :• When connecting this jack to an MP3 player, etc., you should use the stereo mini cord, not a mono mini cord.

■FRONT AUx IN JACk

■Bluetooth IN CONNECTOR

Bluetooth IN

• If the Bluetooth IN connector is connected to Sherwood Audio ReceiverBT-R7(sold separately) with Bluetooth wireless technology, you can enjoymusic wirelessly with a music player featuring Bluetooth wirelesstechnology such as MP3 player, mobile phone, etc..(For information on Sherwood Audio Receiver BT-R7, contact your dealer.)

• The Bluetooth word mark and logos are registered trademarks owned byBluetooth SIG, Inc. and any use of such marks by Sherwood Corporation isunder license. Other trademarks and trade names are those of theirrespective owners.

■Note:• For safe operation, turn the power off before connecting or disconnecting

the Audio Receiver BT-R7.


EN

GLI

SH

15

Remote Controls

CURSOR CONTROL( , , , ), ENTER buttons

ROOM 2 button

NETWORK CONTROL buttons

■Note:• The NETWORK CONTROL buttons are not available for this receiver.


EN

GLI

SH

16


SOUND INPUT

AUDIO ASSIGNSPEAKER

ON / OFF


SETUP MIC F.AUX

POWER


RETURN MAIN MENU


Bluetooth IN

LOADING BATTERIES

REMOTE CONTROL OPERATION RANGE

• Use the remote control unit within a range of about 7 meters (23feet) and angles of up to 30 degrees aiming at the remote sensor.

• Remove the batteries when they are not used for along time.

• Do not use the rechargeable batteries (Ni-Cd type).

1. Remove the cover. 2. Load two batteries ("AAA" size, 1.5 V) matchingthe polarity.


EN

GLI

SH

Operations

LISTENING TO A PROGRAM SOURCE

Before operation

• Enter the standby mode.

• The STANDBY indicator lights up.This means that the receiver is notdisconnected from the AC mains and a smallamount of current is retained to support theoperation readiness.

• To switch the power off, push the POWER switchagain.

• Then the power is cut off and the STANDBYindicator goes off.

• Each time the POWER ON/STANDBY button on the frontpanel is pressed, the receiver is turned on to enter theoperating mode or off to enter the standby mode.

• On the remote control, press the POWER ON button toenter the operating mode or press the STANDBY button toenter the standby mode.

POWER

ON / STANDBY

1. In the standby mode, turn the power on.

17

■Note : Before operating this receiver, first set this unit as desired for optimum performance, doing the system setupprocedures. (For details, refer to "System Setup" on page 36.)

• Then “SP ON” is displayed and the sound can be heardfrom the speakers connected to the speaker terminals.

• When using the headphones for private listening, press theSPEAKER button again to switch the speakers off(“SPOFF” is displayed).

2. Switch the speakers on.

• Each time the “VIDEO” button on the front panel ispressed, the input source changes as follows:→ VIDEO 1 → V2/IPOD → VIDEO 3

• Each time the “AUDIO” button on the front panel ispressed, the input source changes as follows:→ CD → AUX → TV* → F.AUX → BT → TUNER

(Frequency display)

* : Only when the HDMI CONTROL is set to ON, you can hear the digital audio signals from TV via a HDMI cable. (For details, refer to “When selecting the HDMI CONTROL” on page 53.)

• Each time the BAND button(or the TUNER button on theremote control) is pressed, the band changes as follows:→ FM ST → FM MONO → AM → SIRIUS

When an input source other than TV, tuner isselected

AUDIO ASSIGN

RETURN

4. Select the digital or the analog input connected as desired.

• Each time this button is pressed, the corresponding inputis selected as follows:→ O(ptical) 1 → O 2 → C(oaxial) 1 → C 2 → A(nalog)

■Notes :• When VIDEO 1 ~ 3 is selected and the corresponding HDMI IN

is connected, the digital input cannot be selected depending onthe AUDIO MODE setting (“AT”(AUTO), “HD”(HDMI)).

• When TV or tuner is selected as an input source, the digitalinput cannot be selected.

• The selected digital input or analog input is automaticallyassigned to the corresponding input source on the INPUT setupmenu. (For details, refer to “SETTING THE INPUT” on page 40.)

• The sound from the component connected to the selected digitalinput can be heard regardless of the selected input source.

• When the selected digital input is not connected, this unitoperates as follows depending on the AUDIO MODE setting.

* If the AUDIO MODE is set to “AT”, the “DIGITAL” or “HDMI”flickers and the analog input is automatically selected.

* If it is set to “DG” or “HD”, “O1”, etc or “H1”, etc flickers,meaning no sound is heard.

• To hear the sound from the selected digital input, youshould set the AUDIO MODE correctly on the INPUTSETUP menu. (For details, refer to “SETTING THEINPUT” on page 40.)

3. Select the desired input source.

INPUT

BANDAUDIOVIDEO


EN

GLI

SH

18

TONE

TUNE

• Each time these buttons are pressed, the tone mode isselected as follows : OFF : To listen to a program source without the ↕ tone effect.("DIR" lights up.)ON : To adjust the tone for your taste.("DIR" goes off.)

• Each time these buttons are pressed, the tone is selected asfollows:

→ BASS ↔ TRE (treble) ↔ TONE: ON ←

■When the TONE is set to ON to adjust the tone(bass and treble).

• The tone level can be adjusted within the range of -10 ~+10 dB.

• In general, we recommend the bass and treble to beadjusted to 0 dB (flat level).

• Extreme settings at high volume may damage yourspeakers.

• If the tone display disappears, start from the step 9 again.

Adjusting the tone (bass and treble)

• The tone mode isdisplayed for severalseconds.

9. Enter the tone mode.

10. Press the CURSOR LEFT(◀)/RIGHT(▶)buttons to select the desired tone mode.

11. Press the CURSOR UP(▲)/DOWN(▼) buttons

to select the desired tone.

12. Press the CURSOR LEFT(◀)/RIGHT(▶)buttons to adjust the selected tone as desired.

PRESET

• Be sure to switch the speakers off.• When listening to a DTS or Dolby Digital program source,

if the headphones are plugged in and the SPEAKERbutton is set to off, it enters the 2CH downmix modeautomatically. (For details, refer to “2CH downmixmode”on page 22.)

■Note:• Be careful not to set the volume too high when using

headphones.

• When playing back the program sources with surroundsound, refer to “ENJOYING SURROUND SOUND” onpage 21.

• “MUTING” is displayed.• To resume the previous sound level, press it again.

MASTER VOLUME

DOWN UP

MUTE

PHONES

5. Operate the selected component for playback.

6. Adjust the (overall) volume.

7. To mute the sound.

8. To listen with the headphones.


EN

GLI

SH

19

SURROUND SOUND

• This receiver incorporates a sophisticated Digital Signal Processor that allows you to create optimum sound quality and soundatmosphere in your personal Home Theater.

■DTS Digital Surround DTS Digital Surround(also called simply DTS) supports up to5.1 discrete channels and uses less compression for highfidelity reproduction. Use it with DVDs and CDs bearing theDTS logo.

■DTS-ES™ Discrete 6.1

This is a 6.1 channel discrete digital audio format adding asurround back channel to the DTS digital surround sound. Theseven totally separate audio channels provide better spatialimaging and 360 degrees sound localization, perfect forsounds that pan across the surround channels. Use it withDVDs bearing the DTS-ES logo, especially those with a DTS-ES Discrete sound track.

■DTS - ES™ Matrix 6.1

This is a 6.1 channel discrete digital audio format inserting asurround back channel to the DTS digital surround soundthrough matrix encoding. Use it with DVDs bearing the DTS-ES logo.

■DTS Neo : 6™ surroundDTS Neo : 6 is a matrix decoding technology for achieving7.1 channel surround playback with 2 channel sources. Itincludes "DTS Neo : 6 Cinema" suited for playing movies and"DTS Neo : 6 Music" suited for playing music.

■DTS 96/24This is high resolution DTS with a 96 kHz sampling rate and24 bit resolution, providing superior fidelity. Use it with DVDsbearing the DTS 96/24 logo.

■DTS-HD High Resolution AudioDeveloped for use with HDTV, including the new video discformats Blu-ray and HD DVD, this is the latest multi-channelaudio format from DTS. It supports up to 7.1 channels with96 kHz/24 bit sampling rate and signal resolution.

■DTS-HD Master AudioDesigned to take full advantage of the additional storagespace offered by the new Blu-ray and HD DVD disc formats,this new DTS format offers up to 7.1 discrete channels ofuncompressed digital audio with 96 kHz/24 bit sampling rateand signal resolution.

Manufactured under license under U.S. Patent #'s: 5,451,942;5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872;7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patentsissued & pending.DTS is a registered trademark and the DTS logos, Symbol, DTS-HDand DTS-HD Master Audio are trademarks of DTS, Inc. ⓒ 1996-2008 DTS, Inc. All Rights Reserved.

■Dolby Digital Dolby Digital is the multi-channel digital signal formatdeveloped by Dolby Laboratories. Discs bearing the DolbyDigital logo includes the recording of up to 5.1 channels ofdigital signals. This will put you right in the middle of theaction, just like being in a movie theater or concert hall.

■Dolby Digital ExThis mode expands 5.1-channel sources for 6.1/7.1 channelplayback. It's especially suited to Dolby Digital EXsoundtracks that include a matrix-encoded surround backchannel. The additional channel adds an extra dimensionand provides an enveloping surround sound experience,perfect for rotating and fly-by sound effects.

■Dolby Digital Plus Developed for use with HDTV, including the new video discformats Blu-ray and HD DVD, this is the latest multichannelaudio format from Dolby. It supports up to 7.1 channels with48 kHz/24-bit sampling rate and signal resolution.

■Dolby TrueHD Designed to take full advantage of the additional storagespace offered by the new Blu-ray and HD DVD disc formats,this new Dolby format offers up to 7.1 discrete channels oflossless audio performance with 96 kHz/24 bit sampling rateand signal resolution.

■Dolby Pro Logic IIzThis mode adds front height channels to surround sound,creating a 7.1 channel palyback for music, movies and videogames. Dolby Pro Logic IIz brings enhanced spatial effects,added depth, and an overall airiness to listening experience.

■Dolby Pro Logic IIx surround This mode expands any 2-channel source for 7.1-channelplayback. It provides a very natural and seamless surroundsound experience that fully envelopes the listener. As well asmusic and movies,video games can also benefit from thedramatic spatial effects and vivid imaging. It includes "DolbyPro Logic IIx Movie" suited for playing movies, "Dolby ProLogic IIx Music" suited for playing music and "Dolby ProLogic IIx Game" suited for playing games.

■Dolby Pro Logic II surround If you are not using any surround back speakers, Dolby ProLogic II surround will be used instead of Dolby Pro Logic IIxsurround. It incudes Dolby Pro Logic II Movie, Dolby ProLogic II Music and Dolby Pro Logic II Game like Dolby ProLogic IIx surround.

■Dolby Pro Logic Dolby Pro Logic is a specially encoded two channel surroundformat which consists of four channels (front left, center, frontright and surround). Sources bearing the “ ”provide the theater-like surround sound. The surroundchannel is monaural, but is played through both surroundspeakers.

Manufactured under license from Dolby Laboratories.Dolby, Pro Logic, and the double-D symbol are registeredtrademarks of Dolby Laboratories.

Surround modes


20

• The following modes apply conventional 2-channel signalssuch as digital PCM or analog stereo signals to highperformance Digital Signal Processor to recreate soundfields artificially. Select one of the 11 provided surroundmodes according to the program source you want to play.

■Theater This mode provides the effect of being in a theater whenwatching a play.

■Movie This mode provides the effect of being in a movie theaterwhen watching a movie.

■Hall This mode provides the ambience of a concert hall forclassical music sources such as orchestral, chamber musicor an instrumental solo.

■GameThis mode is suitable for video games.

■StadiumThis mode provides the expansive sound field to achieve thetrue stadium effect when watching baseball or soccer games.

■ClassicThis mode provides the acoustic effects of a large concerthall for classical music.

■Rock This mode provides the ambience of a live concert for rock orpop music.

■Acoustic This mode suitable for acoustic music sources.

■AVLC(Auto Volume Level Control) This mode automatically equalizes playback sound levels ifeach sound level varies with the music source recorded in aportable audio player.

■VirtualThis mode creates a virtual surround sound field through twofront speakers.

■Multi CH StereoThis mode is designed for playing background music. Thefront, surround and surround back channels create a stereoimage that encompasses the entire area.

For your reference, the sound from each channel can be reproduced according to the surround modes as follows:

(*): Depending on the subwoofer setting, the sound from the subwoofer channel may be reproduced.

• Depending on the speaker settings and the number of the encoded channels, etc., the sound from the corresponding channelscannot be reproduced.(For details, refer to "SETTING THE SPEAKER / ROOM EQ" on page 42.)

Modes Channels FRONT L/R CENTER SURROUND L/R SURROUND BACK/ SUBWOOFERFRONT HEIGHT L/R

DTS-HD HIGH RESOLUTION AUDIO/MASTER AUDIO O O O O/— O

DTS, DTS 96/24 O O O — O

DTS ES DISCRETE/MATRIX O O O O O

DTS NEO: 6 CINEMA/MUSIC O O O O —(*)

DOLBY DIGITAL PLUS / DOLBY TRUEHD O O O O/— O

DOLBY DIGITAL O O O — O

DOLBY DIGITAL EX O O O O O

DOLBY PRO LOGIC IIz O O O O O

DOLBY PRO LOGIC IIx MOVIE/MUSIC/GAME O O O O O

DOLBY PRO LOGIC II MOVIE/MUSIC/GAME O O O — O

(MULTI) PCM O O O O/— O

AUTO VOLUME LEVEL CONTROL/VIRTUAL O — — — —(*)

DOLBY PRO LOGIC O O O — —(*)

Other Surrounds O O O O —(*)

STEREO O — — — —(*)

EN

GLI

SH


21

(DOLBY D+ +PLIIx MOVIE), DOLBY DIGITAL +, DOLBY D++ EX,DOLBY D+ +PLIIx MUSIC, DSP Surround modes*2

DOLBY DIGITAL+ (DOLBY HD+PLIIx MOVIE), DOLBY TRUEHD, DOLBY HD+ EX, DOLBY HD+ PLIIx MUSIC, DSP Surround modes*2

DOLBY TRUEHD (DOLBY D+PLIIx MOVIE), DOLBY DIGITAL, DOLBY DIGITAL EX,DOLBY D+PLIIx MUSIC, DSP Surround Modes*2

(DTS-HD+PLIIx MOVIE), DTS-HD MSTR or DTS-HD HI RES, DTS-HD+NEO:6, DTS-HD+PLIIx MUSIC, DSP Surround modes*2

DTS-HD MSTR or DTS-HD HI RES

(DTS+PLIIx MOVIE), DTS ES DSCRT, DTS+PLIIx MUSIC(DTS+PLIIx MOVIE), DTS, DTS ES MTRX, DTS+PLIIx MUSIC, DSP Surround modes*2

(DTS+PLIIx MOVIE), DTS or DTS 96/24, DTS+NEO:6, DTS+PLIIxMUSIC, DSP Surround modes*2

PCM(PCM+PLIIx MOVIE), PCM, PCM+EX, PCM+PLIIx MUSIC, DSP Surround modes*2

DOLBY PRO LOGIC, DOLBY PLIIx MOVIE, DOLBY PLIIx MUSIC,DOLBY PLIIx GAME, NEO:6 CINEMA, NEO:6 MUSIC, DSPSurround modes*2

DOLBY DIGITAL+,[DOLBY D++PLIIz HEIGHT]

DOLBY TRUEHD,[DOLBY HD+PLIIz HEIGHT]

DOLBY DIGITAL,[DOLBY D+PLIIz HEIGHT]DTS-HD MSTR or DTS-HD HI RES,[DTS-HD+ PLIIz HEIGHT]

DTS, [DTS+PLIIz HEIGHT]

DTS or DTS 96/24, [DTS+PLIIz HEIGHT]

PCM, [PCM+PLIIz HEIGHT]

DOLBY PRO LOGIC, DOLBY PLII MOVIE,DOLBY PLII MUSIC, DOLBY PLII GAME,NEO:6 CINEMA, NEO:6 MUSIC, DSP Surroundmodes*2,<DOLBY DIGITAL>, [DOLBY PLIIzHEIGHT]

ENJOYING SURROUND SOUND

• Each time this button is pressed, the mode changes as follows :Auto surround mode : The optimum surround mode will be

automatically selected depending on the signalformat being input.

Manual surround mode : You can select the desired of differentsurround modes selectable for the signalbeing input with using the SURROUNDMODE UP/DOWN (>/<) buttons.

• Depending on surround back speaker setting(“SB”) or front height speaker setting(“FH”), some surround modes can beselected or not as follows :( ) : Possible only when “SB” is set to 2 channel(“Lx2”, “Sx2”). (Refer to “When selecting the CONFIGURATION” on page 45.) [ ] : Possible only when “FH” is set to “LARGE” or “SMALL”.< > : Possible only when “SB” or “FH” is set to “NO” and the digital signals from Dolby Digital 2 ch source are played.*1 : When these sources are recorded at 192 kHz, only the corresponding mode(DOLBY DIGITAL+, DOLBY TRUEHD, DTS-HD

MSTR or DTS-HD HI RES, PCM) can be selected.*2 : Stand for THEATER, MOVIE, HALL, GAME, STADIUM, CLASSIC, ROCK, ACOUSTIC, AVLC, VIRTUAL, M.CH STEREO.

■Notes : • Even when the auto surround mode is selected and the same type of digital signal format is being input, the optimum

surround mode may vary depending on whether the speaker type is set to "NO" or not.• When the auto surround mode is selected, the surround modes other than the optimum surround mode cannot be selected.

■When selecting the manual surround mode with pressing the AUTO/MANUAL button on the front panel

Select the desired surround mode.

■Note: Before surround playback, first perform the speaker setup procedure, etc. on the SETUP menu for optimum performance.(For details, refer to "SETTING THE SPEAKER / ROOM EQ" on page 42.)

Depending on how to select a surround mode, select the auto surround mode or the manual surround mode.

("AUTO" lights up.)

("AUTO" goes off.)

• Each time the SURROUND MODE UP/ DOWN (>/<)buttons are pressed, the surround mode changesdepending on the input signal format as follows :

Dolby Digital Plus 5.1 ch*1

Dolby Digital Plus 7.1 chDolby TrueHD 5.1 ch*1

Dolby TrueHD 7.1 chDolby Digital 5.1 ch,Dolby Digital EX 6.1 chDTS-HD Master Audio 5.1 ch*1,DTS-HD High Resolution Audio 5.1 ch*1

DTS-HD Master Audio 7.1 ch,DTS-HD High Resolution Audio 7.1 chDTS ES Discrete 6.1 chDTS ES Matrix 6.1 ch

DTS 5.1 ch,DTS 96/24 5.1 chPCM 7.1 chPCM 5.1 ch*1

Dolby Digital 2 ch,PCM 2 ch, Analog 2 ch

Signal format being inputSelectable surround mode

“SB” : “x2”, “x1” “SB”/”FH” : “NO” or “FH”:“LARGE”/”SMALL”

AUTO/MANUAL

SOUND

SURROUND

EN

GLI

SH


EN

GLI

SH

22

• While playing digital signals form Dolby Digital or Dolby TrueHD program source or listening in Dolby Pro Logic II/DolbyPro Logic IIx Music mode or Dolby Pro Logic IIz mode, you can adjust their parameters for optimum surround effects.

• Then the parameter mode ("PANO : ~ ", “DRC: ~”, etc.) isdisplayed for several seconds.

• If the parameter mode disappears, press this button again.

When adjusting the sound parameters

1. Press the SOUND PARAMETER button.

PRESET

2. Press the CURSOR UP(▲)/DOWN(▼) buttonsto select the desired parameter.

• Each time these buttons are pressed, the parameter modechanges as follows:→"PANO"↔"C.WIDTH"↔"DIMEN"↔"DRC"↔"H.GAIN" ←

• "PANO", "C.WIDTH" and "DIMEN" can be selected onlywhile listening in Dolby Pro Logic II Music mode or DolbyPro Logic IIx Music mode.

• "DRC" can be selected only while playing digital signalsfrom Dolby Digital or Dolby TrueHD program source.

• "H.GAIN" can be selected only while listening in Dolby ProLogic IIz mode.

■When selecting the "PANO (Panorama)" modeThis mode extends the front stereo image to include thesurround speakers for an exciting "wraparound" effect withside wall imaging. Select "OFF" or "ON"(default value: OFF).

■When selecting the "C. WIDTH (Center width)"control

This adjusts the center image so it may be heard only fromthe center speaker, only from the left/right speakers as aphantom image, or from all three front speakers to varyingdegrees.The control can be set in 8 steps from 0 to 7(default value :3).

■When selecting the "DIMEN (Dimension)" controlThis gradually adjusts the soundfield either towards thefront or towards the rear. The control can be set in 7 stepsfrom -3 to +3 (default value : 0).

TUNE

3. Press the CURSOR LEFT(◀)/ RIGHT(▶)buttons to adjust the selected parameter asdesired.

■To cancel the surround mode for stereo operation

• Depending on the signal format which is being input, either thestereo mode or the 2CH downmix mode is selected.

• To cancel either the stereo mode or the 2CH downmixmode, select the surround mode with using the SURROUNDMODE UP/ DOWN (>/<) buttons.

■2CH downmix mode• This mode allows the multi-channel signals encoded in DTS or Dolby Digital format to be mixed down into 2 front channels and

to be reproduced through only two front speakers or through headphones.• When the SPEAKER button is set to off to listen with headphones while playing the multi-channel digital signals from DTS or

Dolby Digital sources, it will enter the 2CH downmix mode automatically.

STEREO

Continued


EN

GLI

SH

23

TUNE

• The volume level of each channel can be adjusted easilywith the test tone function.

■Note : • When the SPEAKER button is set to off, the test tone

function does not work.

Adjusting each channel level with test tone

• The test tone mode is displayed and will be heard from thespeaker of each channel for 2 seconds as follows:→ FL [→FHL] → C [→FHR] → FR → SR

SW ← SL ← (SBL ← SBR) ←

• When the speaker setting is "NO", the test tone of thecorresponding channel is not available.

• ( ) : Possible depending on whether the surround back speaker is set to 2ch(“Lx2”, “Sx2”) or 1ch(“Lx1”, “Sx1”).

• [ ] : Possible only when the front height speaker(“FH”) is not set to “NO”.

1. Enter the test tone mode.

2. At each channel, adjust the level as desired untilthe sound level of each speaker is heard to beequally loud.

3. Cancel the test tone function.

• You can select the desired channel with pressing theCURSOR UP(▲)/DOWN(▼) buttons.

Continue

■When selecting the "DRC (Dynamic Range Compression)"

• This function compresses the dynamic range ofpreviously specified parts of the Dolby Digital or DolbyTrueHD sound track (with extremly high volume) tominimize the difference in volume between the specifiedand non-specified parts. This makes it easy to hear all ofthe sound track when watching movies at night at lowlevels.

■Note :• In some Dolby Digital softwares, DRC setting may not be

valid.

→ AUTO : To adjust the dynamic range compression ↕ automaticallyOFF : To turn off the DRC function↕

MID ↕

→ MAX

• “AUTO” can be selected only while playing digital signalsfrom Dolby TrueHD program source.

■When selecting the "H.GAIN (Height gain)" • You can adjust the front height channel level as desired.

L(Low) : To decrease the front height channel level↕

M(Mid) : To output the front height channel sound with ↕ standard sound volume level.

H(High) : To increase the front height channel level.

4. Repeat the above steps 2 and 3 to adjust other parameters.

Front Front Heigt Center Front Height Front Surround Left Left Right Right Right

Subwoofer Surround Left Surr.Back Left Surr.Back Right

Higher compression


EN

GLI

SH

24

Adjusting the current channel level

• Each time these buttons are pressed, the correspondingchannel is selected as follows:

→REF 1, 2(or CAL)↔ L[↔FHL]↔C[↔FHR]↔ R ↔ SR ←

→ <DD or DTS> ↔ SW ↔ SL ( ↔ SBL ↔ SBR) ←

( ) : Possible depending on whether the surround back speaker isset to 2ch(“Lx2”, “Sx2”) or 1ch(“Lx1”, “Sx1”).

[ ] : Possible only when the front height speaker is not set to “NO”.< >: Possible only when the digital signals from Dolby Digital, DTS,

Dolby TrueHD or DTS HD program sources that include LFEsignal are input.

• Depending on the speaker settings ("NO") and surroundmode, etc., some channels cannot be selected.

• When the SPEAKER button is set to off, only the FrontLeft, Front Right (and LFE) channels can be selected.

• After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suityour tastes.

• You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory ("CAL"),not into preset memory("REF 1", "REF 2").

• The LFE level can be adjusted within the range of -10 ~ 0 dBand other channel levels within the range of -15 ~ +15 dB.

• In general, we recommend the LFE level to be adjusted to0 dB.(However, the recommended LFE level for someearly DTS software is -10 dB.) If the recommended levelsseem too high, lower the setting as necessary.

CH.LEVEL

PRESET

• Then the memory mode ("CAL", etc.) is displayed forseveral seconds.

• When the memory mode or channel level disappears,press this button again.

TUNE

1. Press the CHANNEL LEVEL button.

2. Select the desired channel.

3. Adjust the level of the selected channel asdesired.

4. Repeat the above steps 2 and 3 to adjust eachchannel level.


EN

GLI

SH

Memorizing the adjusted channel levels

• Then "1" of "REF 1" indication flickers for several seconds.

• You can memorize the adjusted channel levels into presetmemory("REF 1", "REF 2") and recall the memorizedwhenever you want.

• "CAL " (or "REF 1", etc.) is displayed for several seconds.• If the channel level mode display disappears, press this

button again.

• The adjusted channel levels have now been memorizedinto the selected memory.

ENTER/MEMO

ENTER/MEMO

TUNE

TUNE

• If the preset memory disappears, perform the above step1 again.

1. After performing the steps 1 ~ 4 in "Adjusting thecurrent channel level" procedure on page 24,press the ENTER(/MEMORY) button.

Recalling the memorized channel levels

• Then the channel levels memorized into the selectedpreset memory are recalled.

CH.LEVEL

2. Select the desired one of REF 1 and REF 2.

3. Confirm your selection.

1. Press the CHANNEL LEVEL button.

2. Select the desired one of REF 1 and REF 2.

25


EN

GLI

SH

26

LISTENING TO RADIO BROADCASTS

Auto tuning

• Each time this button is pressed, the band changes asfollows ;→ FM ST → FM MONO → AM → SIRIUS

("ST" lights up) ("ST" goes off)

• When FM stereo broadcasts are poor because of weakbroadcast signals, select the FM mono mode to reducethe noise, then FM broadcasts are reproduced inmonaural sound.

• To listen to SIRIUS Satellite Radio, select SIRIUS mode.(For details, refer to “SIRIUS Satellite Radio(only for NorthAmerica)” on page 28.)

• Manual tuning is useful when you already know thefrequency of the desired station.

• After selecting the desired band, press the TUNING UP(+)/ DOWN(-) buttons repeatedly until the right frequency hasbeen reached.

Manual tuning

TUNE

TUNE

• The tuner will now search until a station of sufficientstrength has been found. The display shows the tunedfrequency and "TUNE".

• If the station found is not the desired one, simply repeatthis operation.

• Weak stations are skipped during auto tuning.

1. Select the desired band.

2. Press the TUNING UP(+)/DOWN(-) buttons formore than 0.5 second.

Auto presetting

• Auto presetting function automatically searches for FMstations only and store them in the memory.

• While listening to FM radio broadcasts, press and holddown the ENTER(/MEMORY) button for more than 2seconds.

• Then "AUTO MEM" flickers and this receiver starts autopresetting.

• To stop auto presetting, press this button again.• Up to 30 FM stations can be stored.

■Notes:• FM stations of weak strength cannot be memorized.• To memorize AM stations or weak stations, preform

"Manual presetting" procedure with using "Manual tuning"operation.

ENTER/MEMO

BAND


• When using the NUMERIC buttons on the remote control.

Examples: For “3” :

For “15” :

For “30” :

Tuning to preset stations

PRESET

ENTER/MEMO

TUNE

PRESET

3. Select the desired preset number (1~30) and press theENTER(/MEMORY) button.

4. Repeat the above steps1 to 3 to memorize other stations.

■MEMORY BACkUP FUNCTIONThe following items, set before the receiver is turned off, are memorized.• INPUT SELECTOR settings• Surround mode settings• Preset stations,etc.

• When using the NUMERIC buttons on the remote control.

Examples : For “3” :

For “15” :

For “30” :

• The station has now been stored in the memory.• When specifying a two digit number with using the NUMERIC

buttons, the station is stored automatically without pressing theENTER(/MEMORY) button.

• A stored frequency is erased from the memory by storinganother frequency in its place.

• After selecting the tuner as an input source, select thedesired preset number.

27

EN

GLI

SH

Manual presetting

• You can store up to 30 preferred stations in the memory.

• "MEM", etc. flicker.

ENTER/MEMO

1. Tune in the desired station with auto or manual tuning.

2. Press the ENTER(/MEMORY) button.


EN

GLI

SH

28

1. Press the BAND button or the TUNER button repeatedly until the SIRIUS mode is selected.

2. Press the TUNING UP(+)/DOWN(-) buttonsrepeatedly to select SR 000.

3. To sign up, access the website at

"http://activate.siriusradio.com" or call "1-888-539-SIRIUS(7474)".

• Then SIRIUS is displayed for several seconds.

• Then your SIRIUS Satellite Radio ID is displayed. Writeit below. SIRIUS ID :

LISTENING TO SIRIUS SATELLITE RADIO

SIRIUS Satellite Radio (only for North America)

• Before using SIRIUS Satellite Radio, you must first signup for an account. You will need a major credit card andyour SIRIUS Satellite Radio ID, which you can get fromthis receiver, as explained below, or from the Sirius-Connect Home tuner package.

• This receiver is a SIRIUS Satellite Radio Ready® receiver. You can receive SIRIUS® Satellite Radio by connecting to theSiriusConnect Home Tuner kit (sold separately) and subscribing the SIRIUS service.

■What SIRIUS Satellite Radio ? Simply The Best Radio on RadioTM with all your favorite entertainment including 100% commercial-free music, plus superiorsports coverage, uncensored talk and comedy, world-class entertainment, news, weather and more for your car, home oroffice. For more information, visit sirius.com or siriuscanada.ca

Sirius is available in the US for subscribers with address in the continental US and is available in Canada for subscribers witha Canadian address. Required subscription plus compatible SIRIUS tuner and antenna are required and sold saparately. SIRIUS Programming is subject to change. Visit sirius.com for the most complete and up-to-date channel lineup and productinformation.

"SIRIUS" and the SIRIUS dog logo and related marks are trademarks of Sirius Satellite Radio Inc. All rights reserved.

Signing up for SIRIUS Satellite Radio

• In the SIRIUS mode, press the TUNING UP(+)/DOWN(-)buttons repeatedly to select the desired channel.

• If some channels are skipped, perform the “ALLCHANNEL SKIP CLEAR” procedure to reset the skippedchannels. (For details, refer to “When selecting the ALLCHANNEL SKIP CLEAR” on page 31.)

Channel search

BAND

TUNE

TUNE


EN

GLI

SH

29

3. While displaying the channel, select the desired channel, then press the ENTER button.

Examples:

For "3" :

For "27" :

For "124" :

• When "SR - - -" disappears, repeat again from theabove step 1.

1. In the SIRIUS mode, press the SEARCH MODE button to select the direct search mode, then press the ENTER button.

2. While displaying "SR - - -", select the desiredchannel number with pressing the NUMERIC(0~9) buttons.

• Each time the SEARCH MODE button is pressed, the search mode changes as follows:→ DIR SRCH → CAT SRCH → OFF

(Direct search) (Category search)

• Then "SR - - -" is displayed.

• You can select a SIRIUS Satellite Radio channel directlyby entering its number.

Direct search

1. In the SIRIUS mode, press the SEARCH MODE button to select the category search mode, then press the ENTER button.

2. While displaying a category name, select thedesired category, then press the ENTER button.

• Then a category is displayed.

• Each time the SELECT ◀/▶ buttons are pressed, oneof different categories is selected.

• Then a channel that is broadcasting the selectedcategory is displayed.

• When a category name disappears, repeat again fromthe above step 1.

• Category search allows you to select the desired channel by the selected category.

Category search1. Select the desired channel with preforming

channel search, direct search or category search.

2. To memorize the channels, perform the steps 2 to4 in "Manual presetting" procedure on page 27.

• You can store up to 30 preferred channels in the memory.

Presetting channels

• In the SIRIUS mode, select the desired preset channel.

Preset search

PRESET


• Each time the DISPLAY button is pressed, the displaymode changes as follows:

→Volume →Surround mode →Signal input → Channel name → Song title

Input source←Signal strength←Category←Composer name←Artist name ←(“SIRIUS”) ("EXCEL(LENT)", "GOOD", "WEAK", "NO SIG(NAL)")

■Note:• If the information on artist name, song title or category, etc.

is not available, it will not be displayed correctly.

■Signal strength display mode• If the reception is poor, you can check the signal strength of

the SIRIUS Satellite Radio signal and adjust the position ofthe SiriusConnect Home antenna until "EXCEL(LENT)" isdisplayed.

■Error message and status• If an operation takes longer than usual or an error occurs,

one of the following messages may be displayed.

EN

GLI

SH

30

• You can display SIRIUS information such as channelname, artist name, song title and signal strength.

• In the SIRIUS mode,

Displaying SIRIUS information

Message

ANTENNA

UPDATING

SUB UPDATED

NO SIG(NAL)

LINKING

CHECK SIRIUS

TUNER

Status

The SiriusConnect Home tuner is not

connected properly. Check it.

Displayed while the encoding code is

being updated. Please wait.

Displayed while updating contract

information. Please wait.

The signal cannot be received.

Reposition your SiriusConnect Home

Tuner antenna.

The selected channel is not currently

broadcasting. Select another channel.

The SiriusConnect Home tuner is not

connected properly. Check it.

■Tuning in the previously locked channels.① Tune in the channels to which the parental lock is applied

by performing direct search only.• Then "LOCK _ " is displayed for several seconds.

② While displaying "LOCK _ ", input the password (4-digit number) with using the NUMERIC (0~9) buttons.

• When you input the correct code, the current channel canbe heard(, not be unlocked).

• If the wrong password is input, "INCORECT CODE" isdisplayed. In this case, input the password again byperforming the steps ① and ②.

• When "LOCK _ " disappears, repeat again from the abovestep ①.

■Notes:• For details on the password, refer to “When selecting the

PASSWORD SET” on page 32.• You can also set the parental lock on the PARENTAL

LOCK menu.(For details, refer to “When selecting thePARENTAL LOCK” on page 32.)

• The channels to which the parental lock is applied cannotbe tuned in by performing channel search or categorysearch.


EN

GLI

SH

31

■When selecting the ALL CHANNEL SkIP CLEAR• When some channels are skipped during channel search,

you can reset the skipped channels by performing thisprocedure.

• Then “CLEAR ?” is displayed.

• The skipped channels are all reset and the previous menuwill be returned to.

2. Select the desired item, then confirm yourselection.

• The SIRIUS setup menu(“ALL CHANNEL SKIP CLEAR”,etc.) will be shown.

• To turn the menu off, press this button again.• When this button is pressed on a sub-menu, it will return

to the previous menu, too.

• Each time the CURSOR UP(▲)/DOWN(▼) buttons arepressed, the item is selected as follows :

→ ALL CHANNEL SKIP CLEAR ↔ PARENTAL LOCK ←

→ PASSWORD SET ←

■Note:• When the SIRIUS setup is performed for the first time, you

should do the PASSWORD SET procedure first.

1. In the SIRIUS mode, press and hold down the AUDIO ASSIGN button for more than 3 seconds.

SIRIUS setup

PRESET ENTER/MEMO

or

3. Press the ENTER(/MEMORY) button.

ENTER/MEMO

AUDIO ASSIGN

RETURN


EN

GLI

SH

32

4. Select the channel you want to lock or unlock.

PRESET

5. Set the selected channel as desired.

6. Repeat the above steps 4 and 5 to set the channels as desired.

ENTER/MEMO

• Each time the ENTER(/MEMORY) button is pressed, “L” isdisplayed (Lock mode) or not (Unlock mode).

■When selecting the PASSWORD SET• You can change the password to the desired.• Then “CURR : _” is displayed.■Note:• When the PASSWORD SET is performed for the first time,

“NEW:_” is displayed. In this case, performed the steps 4and 5(, but ignor the step 3).

3. Input the current password (4-digit number) withusing the NUMERIC(0~9) buttons.

• When you input the correct code, “NEW : _” is displayed. • If the wrong password is input, “INVALID” flickers. In this

case, input the password again.

• When you input the correct code, “RPT : _” is displayed.

• If the correct password is input, “COMPLETE” is displayedand the previous menu will be returned to.

■Note :• Do not forget the password.If you forgot your password, you cannot lock or unlock thechannel.

4. To input the new password (4-digit number), perform the above step 3.

5. To confirm the new password, repeat the above step 3 to input it.

• When you input the correct code, the current channel islocked (or unlocked).

• If the wrong password is input, “INVALID” flickers and then“LOCK _” is displayed. In this case, input the passwordagain.

3. Input the password (4-digit number) with using theNUMERIC(0~9) buttons.

■When selecting the PARENTAL LOCk• You can lock the channels that you do not want to receive

or unlock the previously locked channels.• Then “LOCK _” is displayed.


EN

GLI

SH

33

RECORDING

• The digital signals from the coaxial, optical digital input or HDMI IN can be heard but cannot be recorded.• When recording the analog signals from CD, AUX, F.AUX, BT, VIDEO 2~3, be sure to select the analog input. (For details, refer to "When an input source other than TV, tuner is selected" on page 17.)

• The volume and tone (bass, treble) settings have no effect on the recording signals.

• The audio and video signals from the VIDEO 2 will be dubbed onto the VIDEO 1 and you can enjoy them on the TV set andfrom the speakers.

■Recording audio signals(, not video signals)• When an audio recording equipment is connected to the AUDIO IN/OUT jacks of “VIDEO 1”, select the desired of CD, AUX,

F.AUX, BT, TUNER, VIDEO 2~3.

Dubbing from video components onto VIDEO 1

1. Select VIDEO 2 as a recording source except VIDEO 1.

2. Start recording on the VIDEO 1.

3. Start play on the desired input.

VIDEO


EN

GLI

SH

34

Operating the sleep timer

• The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off.• To set the receiver to automatically turn off after the specified period of time.

Adjusting the brightness of the fluorescent display

OTHER FUNCTIONS

• Each time this button is pressed, the display modechanges as follows:

• When the SIRIUS Satellite Radio function is available inyour country, for details on the SIRIUS information, see“Displaying SIRIUS information” on page 30.

Displaying the operation status

Surroundmode

Signalinput

VolumeInput

source→ → → →

• Each time this button is pressed, the sleep time changesas follows:→ 10 → 20 → 30 → --- → 90 → OFF

Unit : minutes

• While operating the sleep timer, " " lights up.

• When the sleep time is selected, the fluorescent displayis dimly lit.

• Each time this button is pressed, the brightness ofthe fluorescent display changes as follows:→ ON → dimmer → OFF

• In the display OFF mode, pressing some buttonscancel the display OFF mode to display the operationstatus.

During playback,

• Each time this button is pressed, the ROOM 2 MODEchanges as follows:ON : To turn on the ROOM 2 function.(“R2” lights up.)↕

OFF : To turn it off. (“R2” goes off.)• You can select the desired ROOM 2 source on the MULTI

ROOM menu only. (For details on ROOM 2 playback,refer to “SETTING THE MULTI ROOM” on page 50.)

■Notes :• Even when this receiver enters the standby mode, in such

a case that “R2” lights up still, meaning only the ROOM 2circuitry operates, the ROOM 2 source can be playedindependently.

• When you do not use the ROOM 2 function, turn off theROOM 2 function to save electricity.

Playing ROOM 2 source

• The ROOM 2 function alllows enjoying one source in themain room and playing another in a different room at thesame time.


35

Before operation

To use the HDMI control functions properly, it is recommend to confirm the HDMI control functions usable with eachconnected component by performing the following operations.

■Note :• Some HDMI control functions may not work with certain components and TV that are not compatible with them.

• Check that this receiver, TV and player, etc are connected by HDMI cabels.• Check that the HDMI control of TV and the HDMI-connectable player are enabled.(For details on the setups of TV and player, refer to their operating instructions.)

• Set the HDMI CONTROL and the POWER CONROL to ON to enable the HDMI control of this receiver.(For details, refer to “SETTING THE HDMI” on page 53.)

• Confirm that its picture is displayed and the sound is heard from the speakers properly.

Confirming the basic HDMI operations

CONFIRMING THE HDMI FUNCTION

1. Turn the power on for all the components connected by HDMI cables.

2. Switch the TV input to the HDMI input connected to this receiver.

3. Switch this unit input to the HDMI input source.

• Confirm that all the components are turned on and the inputs of this unit and TV are switched automatically.

• Confirm that all the components are turned off.

Confirming the HDMI control functions

1. Turn the power on for all the components connected by HDMI cables.

2. Turn the TV off to enter the standby mode.

3. With all the components off, start playback on a player (connected by HDMI cable).E

NG

LIS

H


EN

GLI

SH

System Setup

36

• The setup menu is displayed on the fluorescent display and allows you to perform the setup procedures easily. In mostsituations, you will only need to set this once during the installation and layout of your home theater, and it rarely needs to bechanged later. The setup menu consists of 7 main menus ; system, input, speaker/room EQ, CH level, multi room, parameter and HDMI.These menus are then divided up into various sub-menus.

■Navigating through the setup menu• The explanations here assume you are using the buttons on the remote control when performing the setup menu operation.

However, you can use the buttons on the front panel as well.The buttons on the front panel correspond to those on the remote control as shown below.

SETUP ENTER / MEMO PRESETTUNE

MAIN MENU

• The setup menu will be shown.• To turn the menu off, press this button again.

• When selecting "SYSTEM", see "SETTING THESYSTEM" on page 38.

• When selecting "INPUT", see "SETTING THE INPUT" onpage 40.

• When selecting "SPK/EQ", see "SETTING THESPEAKER/ROOM EQ" on page 42.

• When selecting "CH LEVEL", see "SETTING THE CHLEVEL" on page 48.

• When selecting "MLT ROOM", see "SETTING THEMULTI ROOM" on page 50.

• When selecting "PARAMTR", see "SETTING THEPARAMETER" on page 51.

• When selecting "HDMI", see "SETTING THE HDMI" onpage 53.

• When selecting "EXIT", the setup menu will be turned off.

1. Turn the setup menu on.

2. Select the desired menu using the CURSORUP(▲)/ DOWN(▼) buttons.

3. Confirm your selection.


EN

GLI

SH

37

AMP : S.BACK / F.H / ROOM 2 / BI AMP

SW M : NORM / SW +

TONE : OFF / ON

RETURN BASS : 0 / - 10 ~ + 10

TRE : 0 / - 10 ~ + 10

SPK / EQ

VID 1 CFGV2IPD CFGVID 3 CFGBT CFGCD CFGAUX CFGF.AUX CFGRETURNAUTO SET

ROOM EQ

CONFIG

X-OVER

DISTANCE

RETURN

MODE : CAL / REF 1 / REF 2

L : 0 dB / -15 ~ + 15

C : 0 dB / -15 ~ + 15

R : 0 dB / -15 ~ + 15

SR : 0 dB / -15 ~ + 15

SBR : 0 dB / -15 ~ + 15

SBL : 0 dB / -15 ~ + 15

SL : 0 dB / -15 ~ + 15

SW : 0 dB / -15 ~ + 15

DD : 0 dB / -10 ~ 0

DTS : 0 dB / -10 ~ 0

RETURN

ROOM 2 : OFF / ON

RETURN

DRC : OFF / MID / MAX

RETURNDRC : AUTO / OFF / MID / MAX

RETURN

PANO : OFF / ON

C.WIDTH : 3 / 0 ~ 7

DIMEN : 0 / -3 ~ +3

DRC DD

DRC THD

H.GAIN : L / M / H

RETURN

IN : MAIN / TUNER / CD / AUX / F.AUX / VIDEO 1 / V2/IPOD / VIDEO 3 / BT

VOL : 30 / MIN(0) ~ MAX(80)

RETURN

MLT ROOM

HDMI : AMP / THRU

CEC : OFF / ON

POWER : OFF / ON

RETURN

HDMI SETUP

EXIT

MODE : OFF / ON

RETURN

A.MODE : AT / HD / DG / AN

AUD* : OPT1 / OPT 2 / COX 1 / COX 2 / - - -

AUTO : ON / OFF

SYNC : 0 / 0 ~ 200

RETURN

FC : 30 / 50 / 80 / 100 / 150 / 200

RETURN

UNIT : FT / ML : 3.0 M / 0.1 ~ 9.0

C : 3.0 M / 0.1 ~ 9.0

R : 3.0 M / 0.1 ~ 9.0

SR : 3.0 M / 0.1 ~ 9.0

SBR : 3.0 M / 0.1 ~ 9.0

SBL : 3.0 M / 0.1 ~ 9.0

SL : 3.0 M / 0.1 ~ 9.0

SW : 3.0 M / 0.1 ~ 9.0

RETURN

L : 10.0 FT / 0.5 ~ 30.0

C : 10.0 FT / 0.5 ~ 30.0

R : 10.0 FT / 0.5 ~ 30.0

SR : 10.0 FT / 0.5 ~ 30.0

SBR : 10.0 FT / 0.5 ~ 30.0

SBL : 10.0 FT / 0.5 ~ 30.0

SL : 10.0 FT / 0.5 ~ 30.0

SW : 10.0 FT / 0.5 ~ 30.0

RETURN

F : LARGE / SMALL

C : LARGE / SMALL / NO

S : LARGE / SMALL / NO

SB : L x 2 / L x 1 / S x 2 / S x 1 / NO

SW : YES / NO

RETURN

■Setup menu flow• The setup menu flow is as follows :

• When "RETURN" is selected on a sub-menu, it will return to the previous menu.• When the AUDIO ASSIGN(/RETURN) button is pressed on a sub-menu, it will return to the previous menu, too.■Note : During settup menu operation, only the (POWER ON/)STANDBY button and the buttons required for system setup

will function.

* : Default setting for AUDIO ASSIGN

varies depending on the input source.


EN

GLI

SH

1. Press the CURSOR UP(▲)/DOWN(▼) buttonsto select the desired item.

2. Press the CURSOR LEFT(◀)/RIGHT(▶)buttons to set the selected item as desired

SETTING THE SYSTEM

38

AMP : S.BACK / F.H / ROOM 2 / BI AMP

SW M : NORM / SW +

TONE : OFF / ON

RETURN BASS : 0 / - 10 ~ + 10

TRE : 0 / - 10 ~ + 10

• AMP ASSIGN : To assign the power amplifier correctly depending on how to use the speakers.

• SW M(SUBWOOFER MODE) : To select the desired subwoofer mode.

• TONE : To adjust the tone (bass and treble) as desired.

• RETURN : To return to the previous menu.

When selecting the AMP ASSIGN

• The SURROUND BACK channels’ power amplifier can drive surround back speakers, front height speakers, ROOM 2speakers or bi-amp capable speakers. Depending on how to use the speakers, you should assign the power amplifiercorrectly. (For details, refer to “CONNECTING SPEAKERS” on page 9 and “CONNECTING ROOM 2 OUT JACKS OR ROOM2 SPEAKER TERMINALS” on page 11.)

→S.BACK (SURROUND BACK) : To drive the surround back speakers when connecting the SURROUND BACK channels to ↕ them

F.H (FRONT HEIGHT) : To drive the front height speakers for Dolby Pro Logic IIz playback.↕

ROOM 2 : To drive the ROOM 2 speakers for ROOM 2 playback.↕

→BI AMP : To drive the bi-amp capable speakers for bi-amplification.

When selecting the SUBWOOFER MODE

• "SW ＋" mode is effective only when “F”(Front) and "C"(Center) are set to "LARGE" and "SW"(Subwoofer) is set to "YES" onthe SPEAKER/ROOM EQ menu. (For details, refer to "SETTING THE SPEAKER/ROOM EQ" on page 42.)

NORM : When the low frequency signals of channels set to "LARGE" are reproduced from those channels only.In this mode, the low frequency signals that are reproduced from the subwoofer channel is only the low frequencysignals of LFE (from the multi-channel sources that contains LFE (Low Frequency Effects) channel, also called the ".1"channel) and the channels set to "SMALL".

SW ＋: When the low frequency signals of channels set to "LARGE" are reproduced simultaneously from those channels andthe subwoofer channel.In this mode, the low frequency range expands more uniformly through the room, but depending on the size and shapeof the room, interference may result in a decrease of the actual volume of the low frequency range.

↕


EN

GLI

SH

39

OFF : To listen to a program source without the tone effect. ("DIR" lights up.)↕

ON : To adjust the tone for your taste. ("DIR" goes off.)

■When the TONE is set to ON to adjust the tone (bass and treble)

① Press the ENTER button to enter the tone setting mode.

• The tone level can be adjusted within the range of -10 ~+10 dB.

• In general, we recommend the bass and treble to beadjusted to 0 dB (flat level).

• Extreme settings at high volume may damage yourspeakers.

③ Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to adjust the selected tone as desired.

When selecting the TONE

When selecting the BASS

② Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired tone.


EN

GLI

SH

40

3. Press the CURSOR LEFT(◀)/RIGHT(▶)buttons to set the selected item as desired.


SETTING THE INPUT

VID 1 CFG

V2IPD CFG

VID 3 CFG

BT CFG

CD CFG

AUX CFG

F.AUX CFGRETURN

A.MODE : AT / HD / DG / ANAUD : OPT1 / OPT 2 / COX 1 / COX 2 / - - -AUTO : ON / OFFSYNC : 0 / 0 ~ 200RETURNA.MODE : AT / HD / DG / ANAUD : OPT1 / OPT 2 / COX 1 / COX 2 / - - -AUTO : ON / OFFSYNC : 0 / 0 ~ 200RETURNA.MODE : AT / HD / DG / ANAUD : OPT1 / OPT 2 / COX 1 / COX 2 / - - -AUTO : ON / OFFSYNC : 0 / 0 ~ 200RETURN

A.MODE : AT / DG / ANAUD : OPT1 / OPT 2 / COX 1 / COX 2 / - - -AUTO : ON / OFFRETURNA.MODE : AT / DG / ANAUD : OPT1 / OPT 2 / COX 1 / COX 2 / - - -AUTO : ON / OFFRETURN

A.MODE : AT / DG / ANAUD : OPT1 / OPT 2 / COX 1 / COX 2 / - - -AUTO : ON / OFFRETURN

A.MODE : AT / DG / ANAUD : OPT1 / OPT 2 / COX 1 / COX 2 / - - -AUTO : ON / OFFRETURN

• A.MODE (AUDIO MODE) : To select the audio input signal to be played.• AUD (AUDIO ASSIGN) : To assign the connected DIGITAL INs to the desired input.• AUTO (AUTO SURROUND) : To select the auto surround mode or the manual surround mode.• SYNC (AV SYNC) To adjust the time delay between the video and audio signals.• RETURN : To return to the previous menu.

1. Press the CURSOR UP(▲)/DOWN(▼) buttons toselect the desired input source, then press theENTER button.


EN

GLI

SH

41

• You can select the audio input signal to be played.

■Notes :• Be sure to set the AUDIO MODE to the audio input which is connected and assigned to the selected input source.• When the HDMI AUDIO OUT is set to THRU, no sound will be heard from the speakers connected to this receiver (except ROOM

2 speakers). (For details, refer to “When selecting the HDMI AUDIO OUT” on page 53.)• “HD”(HDMI) cannot be selected on the “BT CFG”, “CD CFG”, “AUX CFG” and “F.AUX CFG” menus.• When the AUDIO MODE is set to “HD”(HDMI), you should connect the HDMI IN corresponding to the video input source (VIDEO 1,

VIDEO 2/iPod, VIDEO 3). If not, the “H1”(, “H2” or “H3”) flickers and no sound will be heard.• When the AUDIO MODE is set to “DG”(DIGITAL), you should connect the DIGITAL IN and set the AUDIO ASSIGN correctly. If not,

the “O1”(,“O2”, “C1” or “C2”) flickers and no sound will be heard.

→ AT (AUTO) : When there are multiple audio input signals, the audio input signals are detected and the audio input signal to be played is selected automatically in the priority order of them : HDMI audio > DIGITAL audio > ANALOG audio

HD(HDMI) : The signals that is input into the HDMI IN is always played.↕

DG(DIGITAL) : The signal that is input into the OPTICAL or the COAXIAL DIGITAL IN is always played.↕

→ AN(ANALOG) : The signal that is input into the analog AUDIO INs is always played.

When selecting the AUDIO MODE

• You should assign the connected DIGITAL IN to the desired input source.(For details, refer to "CONNECTING DIGITAL INS" on page 8.)

• You can select the desired of OPT 1 (optical 1), OPT 2(optical 2), COX 1(coaxial 1), COX 2(coaxial 2) and - - - (analog).

■Notes :• In such a case that a DIGITAL IN is assigned to two input sources or more, when these input sources are selected, the digital

audio signals can be heard from the same DIGITAL IN.• When the HDMI IN connector is connected to your video component and the AUDIO MODE is set to “AT”(AUTO) or

“HD”(HDMI), the AUDIO ASSIGN setting is invalid.

When selecting the AUDIO ASSIGN

• Depending on how to select a surround mode, you can select the auto surround mode or the manual surround mode.OFF(Manual surround mode) : You can select the desired of different surround modes selectable for the signal being input with using

the SURROUND MODE UP/DOWN ( > / <) buttons. (For details, refer to "when selecting the manualsurround mode with pressing the AUTO/MANUAL button on the front panel" on page 21.)

ON(Auto surround mode) : The optimum surround mode will be automatically selected depending on the signal format being input.

■Notes :• Even when the auto surround mode is selected and the same type of digital signal format is being input, the optimum surround

mode may vary depending on whether the speaker type is set to "NO" or not.• When the auto surround mode is selected, the surround modes other than the optimum surround mode cannot be selected.

When selecting the AUTO SURROUND

↕

• There may be a slight time delay between the video and audio signals in case that some video playback equipments mayprocess the video signals later than the audio signals due to signal processing procedure, etc.. Should this happen, you canadjust the time delay of audio signals to synchronize the sound with the picture.

• The time delay can be adjusted within the range of 0 ~ 200 msec.

■Note :• The “SYNC”(AV SYNC) cannot be selected on “BT CFG”, “CD CFG”, “AUX CFG” and “F.AUX CFG” menus.

When selecting the AV SYNC

↕


42

SETTING THE SPEAKER / ROOM EQ

• After you have installed this receiver and connected all the components, you should adjust the speaker settings for theoptimum sound acoustics according to your environment and speaker layout.

• Even when you change speakers, speaker positions, or the layout of your listening environment, you should adjust thespeaker settings, too.

• When performing the AUTO SETUP procedure, you need not perform the CONFIGURATION, DISTANCE and CH LEVELsetup procedures.However, you should set the CROSSOVER manually when speakers are set to “SMALL”.

SPK / EQ

AUTO SET

ROOM EQ

CONFIG

X-OVER

DISTANCE

RETURN

MODE : OFF / ON

RETURN

FC : 30 / 50 / 80 / 100 / 150 / 200

RETURN

UNIT : FT / ML : 3.0 M / 0.1 ~ 9.0

C : 3.0 M / 0.1 ~ 9.0

R : 3.0 M / 0.1 ~ 9.0

SR : 3.0 M / 0.1 ~ 9.0

SBR : 3.0 M / 0.1 ~ 9.0

SBL : 3.0 M / 0.1 ~ 9.0

SL : 3.0 M / 0.1 ~ 9.0

SW : 3.0 M / 0.1 ~ 9.0

RETURN

L : 10.0 FT / 0.5 ~ 30.0

C : 10.0 FT / 0.5 ~ 30.0

R : 10.0 FT / 0.5 ~ 30.0

SR : 10.0 FT / 0.5 ~ 30.0

SBR : 10.0 FT / 0.5 ~ 30.0

SBL : 10.0 FT / 0.5 ~ 30.0

SL : 10.0 FT / 0.5 ~ 30.0

SW : 10.0 FT / 0.5 ~ 30.0

RETURN

F : LARGE / SMALL

C : LARGE / SMALL / NO

S : LARGE / SMALL / NO

SB : L x 2 / L x 1 / S x 2 / S x 1 / NO

SW : YES / NO

RETURN

• AUTO SET(AUTO SETUP) : To set the speaker setup and channel level setup automatically.• ROOM EQ : To turn on or off the room EQ.• CONFIG (CONFIGURATION) : To select the sizes of the speakers that are connected.• X-OVER (CROSSOVER) : To select the desired crossover frequency. • DISTANCE: To enter the distance between the listening position and each speaker to set the delay time automatically for

optimum surround playback.• RETURN : To return to the previous menu.

When selecting the AUTO SETUP

• Auto Setup lets you avoid troublesome listening-based speaker setup and achieve good surround sound. Auto Setup has thefeature that provides the optimum listening environment at the listening position in your room.You should connect the supplied microphone to the SETUP MIC jack so that this receiver can analyze the information from aseries of test tones emitted from speakers at main listening position and can adjust the configuration, distance, sound leveland frequency response of each speaker automatically.

• If you want to personalize your speaker setup and channel level setup by making the settings manually, perform the "Whenselecting the CONFIGURATION" on page 45, "When selecting the CROSSOVER" on page 46, "When selecting theDISTANCE" on page 47 and "SETTING THE CH LEVEL" on page 48.

• After the auto setup has been completed, set the room EQ as desired. (For details, refer to "When selecting the ROOM EQ"on page 44.)

■Preparations①. Check that the speakers are securely connected to this receiver.

• If your subwoofer has adjustable volume and crossover frequency, set the volume halfway and set the crossoverfrequency to the maximum or the low pass filter off.

②. Connect the supplied microphone to the SETUP MIC jack on the front panel.(For details, refer to "SETUP MIC JACK" onpage 14.)

■Notes :• Because the microphone for Auto Setup is designed for use with this receiver, to use the auto setup function, do not use a

microphone other than the one supplied with this receiver. • After you have completed the auto setup procedure, disconnect the microphone.

EN

GLI

SH


43

• If possible, use a tripod, etc. to attach the microphone at the same height as your ears would be when you are seated in yourlistening position.

• Ensure there are no obstacles between the speakers and the microphone.

1. Place the microphone on a flat level surface at the listening position.

• Loud test tones are output successively and then if a series of auto setup procedure has been completed, the results arememorized and the previous menu is displayed.

• To stop the auto setup procedure while performing it, pess the AUDIO ASSIGN(/RETURN) button or the SETUP (/MAINMENU) button.

• If there may be a problem with front speakers or microphone connection, error message will be displayed. In this case, turn offthe power, check the connection and then retry the auto setup procedure.

• Check the results on each setup menu (CONFIGURATION menu on page 45, DISTANCE menu on page 47 and CHLEVEL menu for “CAL” mode on page 48).

• If the results are not satisfactory, you can retry the auto setup procedure or personalize your speaker setup and channellevel setup by making the settings manually. (For details, refer to "When selecting the CONFIGURATION" on page 45,"When selecting the CROSSOVER" on page 46, "When selecting the DISTANCE" on page 47, "Adjusting each channel levelwith test tone" on page 23 and "Adjusting the current channel level" on page 24.)

■Notes :• Because the test tones are loud, ensure there no infants or small children in the room.• For best results, ensure the room is as quiet as possible during the auto setup procedure.

If there is too much ambient noise, the results may not be satisfactory.

Continued

2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the “AUTO SET”, then press the ENTER button.

EN

GLI

SH


EN

GLI

SH

44

When selecting the ROOM EQ

• The room EQ is a kind of room equalizer for your speakers. According to the acoustic characteristics of your roommeasured by the auto setup, the room EQ automatically adjusts the frequency response of your speakers.

• If you use different brands or sizes of speakers for some channels or have a room with unique acoustic characteristics,such as walls, furniture, and the dimensions or the shape of the room, we recommend using the room EQ.

■Note :• To use the room EQ, first you should finish measuring the acoustic characteristics of your room performing the auto setup. (For details, refer to "When selecting the AUTO SETUP" on page 42.)

OFF : To turn off the room EQ.↕

ON : To adjust the frequency response of all speakers tothe flattest response.

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the “ROOM EQ”, then press the ENTER button.

2. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to select the desired room EQ mode.


EN

GLI

SH

• Depending on your speaker type, you can select one of these following speaker types.• Front, Center, Surround and Surround Back(or Front Height) speakers :LARGE(or L) : Select this when connecting speakers that can fully reproduce sounds below crossover frequency.SMALL(or S) : Select this when connecting speakers that can not fully reproduce sounds below crossover frequency.

When this is selected, sounds below crossover frequency are sent to the subwoofer or speakers which are setto "LARGE" (when not using a subwoofer).

NO : Select this when no speakers are connected. When this is selected, sounds are sent to the speakers which are not set to"NO".

( ) : Selectable for Surround Back speakers.

• Surround Back speakers : x2/x1 : Select the desired depending on the number of speakers connected to SURROUND BACK terminals.

• Subwoofer :YES : Select this to output LFE signals and bass frequencies of channels set to “SMALL” form the subwoofer.NO : Select this when the subwoofer is not connected. The bass frequencies are output from other speakers.

■Notes :• When speakers are set to "SMALL", you should set their crossover frequency correctly according to their frequency

characteristics. (For details, refer to "When selecting the CROSSOVER" on page 46.)• When the "F"(Front) is set to "SMALL", “C”(Center), “S”(Surround) and "SB"(Surround Back) (or “FH”(Front Height)) cannot be

set to "LARGE" and the “SW”(Subwoofer) cannot be set to “NO”.• When the "S"(Surround) is set to "SMALL", the "SB"(Surround Back) cannot be set to "L"(Large).

45

3. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to set the selected speaker as desired.

4. Repeat the above steps 2 and 3 until the speakers are all set to the desired mode.

■About the speaker size• Select "LARGE" or "SMALL" not according to the actual size of the speaker but according to the speaker's capacity for playing

low frequency (bass sound below frequency set on the "CROSSOVER" menu) signals.• If you do not know, try comparing the sound at both settings (setting the volume to a level low enough so as not to damage

the speakers) to determine the proper setting.

When selecting the CONFIGURATION

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the "CONFIG", then press the ENTER button.

2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired speaker.


EN

GLI

SH

46

• You can select the crossover frequency among 30, 50, 80, 100, 150 and 200 Hz.

■About the crossover frequency• When speakers are set to "SMALL", low frequencies in those channels that are below the crossover frequency are to output

from subwoofer or front speakers which are set to "LARGE" (when not using a subwoofer).• Refer to the operating instructions of the speakers to be connected. If the frequency range of your speaker is 100 Hz~20 kHz,

the crossover frequency should be set to 100 Hz(or slightly higher).

When selecting the CROSSOVER

• When speakers are set to "SMALL", be sure to set their crossover frequency correctly according to their frequencycharacteristics.

■Note :• Even though performing the AUTO SETUP procedure, you should set the CROSSOVER manually when speakers are set to

“SMALL”.

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the "X-OVER", then press the ENTER button.

2. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the crossover frequency as desired.


EN

GLI

SH

47

■When selecting the desired unit• You can select either "FT (Feet)" or "M (Meter)".• Once a unit is selected, the distances are automatically

changed in the selected unit.

■When setting the distance• You can set the distance within the range of 0.5 ~ 30.0

feet in 0.5 feet intervals (or 0.1 ~ 9.0 meters in 0.1 meterintervals).

When selecting the DISTANCE

■Note :• You cannot select the speakers set to "NO".

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the “DISTANCE”, then press the ENTER button.

2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item.

3. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected item as desired.

4. Repeat the above steps 2 and 3 until the distances are all set as desired.

■About the speaker distanceWhen enjoying multi-channel surround playback with Dolby Digital and DTS sources, etc., it is ideal that the center, surround andsurround back speakers, etc. should be the same distance from the main listening position as the front speakers. By entering thedistance between the listening position and each speaker, the delay times of center, surround and surround back speakers, etc.are automatically adjusted to create an ideal listening environment virtually as if the center, surround and surround backspeakers, etc. were at their ideal locations respectively.


EN

GLI

SH

48

SETTING THE CH LEVEL

■Note : Depending on the speaker settings ("NO", etc), some channels cannot be selected.

• The LFE level can be adjusted within the range of -10 ~ 0dB and other channel levels within the range of -15 ~ +15 dB

• In general, we recommend the LFE level to be adjusted to0 dB.(However, the recommended LFE level for someearly DTS software is -10 dB.) If the recommended levelsseem too high, lower setting as necessary.

MODE : CAL / REF 1 / REF 2

L : 0 dB / -15 ~ + 15

C : 0 dB / -15 ~ + 15

R : 0 dB / -15 ~ + 15

SR : 0 dB / -15 ~ + 15

SBR : 0 dB / -15 ~ + 15

SBL : 0 dB / -15 ~ + 15

SL : 0 dB / -15 ~ + 15

SW : 0 dB / -15 ~ + 15

DD : 0 dB / -10 ~ 0

DTS : 0 dB / -10 ~ 0

RETURN

1. Press the CURSOR UP(▲)/DOWN(▼) buttonsto select the desired channel.

2. Press the CURSOR LEFT(◀)/RIGHT(▶)buttons to adjust the level of the selectedchannel or program source's LFE as desired.

3. Repeat the above steps 1 and 2 to adjust eachchannel level.

• You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory("CAL"),not into preset memory ("REF 1", "REF 2")

• After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suityour tastes. (For details, refer to "Adjusting each channel level with test tone" on page 23.)

Adjusting the current channel level

Example: When selecting Dolby Digital source's LFE


EN

GLI

SH

49

Memorizing the adjusted channel levels

• You can memorize the adjusted channel levels into presetmemory("REF 1", "REF 2") and recall the memorizedwhenever you want.

• Then "1" of "REF 1" indication flickers.

• Each time the CURSOR LEFT(◀) or RIGHT(▶) button ispressed, "REF 1" or "REF 2" is selected.

• The adjusted channel levels have now been memorizedinto the selected memory.

• "CAL" may be displayed instead of "REF 1" or "REF 2".

• Then the channel levels memorized into the selectedpreset memory are recalled.

Recalling the memorized channel levels

1. After performing the steps 1 ~ 3 in "Adjusting thecurrent channel level" procedure on page 48,press the ENTER button.

2. Press the CURSOR LEFT(◀)/RIGHT(▶)buttons to select the desired preset memory,then press the ENTER button.

1. Press the CURSOR UP(▲)/DOWN(▼) buttonsto select the "MODE ~ ".

2. Press the CURSOR LEFT(◀)/RIGHT(▶)buttons to select the desired one of REF 1 andREF 2.


EN

GLI

SH

50

• The ROOM 2 function allows enjoying one source in the main room and playing another in a different room at thesame time.

• ROOM 2(ROOM 2 MODE) : To turn on or off the ROOM 2 function.• IN(ROOM 2 INPUT) : To select the desired ROOM 2 source.• VOL(ROOM 2 VOLUME) : To adjust the volume on the power amplifier assigned to “ROOM 2”.• RETURN : To return to the previous menu.

■Notes:• When the speakers are connected to the ROOM 2 speaker terminals, be sure to set the “AMP” to “ROOM 2”. (For details, refer

to “When selecting the AMP ASSIGN” on page 38.)• Only the analog input signal from the ROOM 2 source can be heard. So, be sure to make analog audio connection (and select

analog input for ROOM 2 source if needed).

SETTING THE MULTI ROOM

1. Press the CURSOR LEFT(◀)/RIGHT(▶) buttonsto set the ROOM 2 MODE as desired.


3. Press the CURSOR LEFT(◀)/RIGHT(▶) buttonsto set the selected item as desired.

■Notes:• When the ROOM 2 mode is set to OFF, you cannot select

the ROOM 2 INPUT and the ROOM 2 VOLUME.• Even when this receiver enters the standby mode, in such

a case that “R2” lights up still, meaning only the ROOM 2circuitry operates, the ROOM 2 source can be playedindependently.

• When you do not use the ROOM 2 function, turn off theROOM 2 function to save electricity.

■When the ROOM 2 MODE is set to ON.

■When selecting the ROOM 2 INPUT• You can select the desired among MAIN source, TUNER,

CD, AUX, F.AUX, VIDEO 1, V2/IPOD, VIDEO 3 and BT.

■When selecting the ROOM 2 VOLUME• You can adjust the volume on the power amplifier

assigned to “ROOM 2” when the ROOM 2 speakerterminals are connected to the speakers in a differentroom.

ON : To turn on the ROOM 2 function.(“R2” lights up)↕

OFF : To turn it off.(“R2” goes off)

ROOM 2 : OFF / ON

RETURN

IN : MAIN / TUNER / CD / AUX / F.AUX / VIDEO 1 / V2/IPOD / VIDEO 3 / BT

VOL : 30 / MIN(0) ~ MAX(80)

RETURN

MLT ROOM


51

SETTING THE PARAMETER

When selecting “PANO”, “C.WIDTH”, “DIMEN”

• You can adjust the various Dolby Pro Logic II/Dolby Pro Logic IIx Music parameters for optimum surround effect.

■Note: • The parameter settings are valid only when listening in Dolby Pro Logic II/Dolby Pro Logic IIx Music mode.

DRC : OFF / MID / MAX

RETURNDRC : AUTO / OFF / MID / MAX

RETURN

PANO : OFF / ON

C.WIDTH : 3 / 0 ~ 7

DIMEN : 0 / -3 ~ +3

DRC DD

DRC THD

H.GAIN : L / M / H

RETURN

• DOLBY PRO LOGIC II MUSIC PARAMETERS : To adjust the various Dolby Pro Logic II/Dolby Pro Logic IIx Music

parameters for optimum surround effect.

• DRC DD/THD(DYNAMIC RANGE COMPRESSION : To adjust the dynamic range compression that makes faint sound easier

to hear at low volume levels.

• H.GAIN(HEIGHT GAIN) : To adjust the front height channel level.

• RETURN : To return to the previous menu.

(PANO(PANORAMA), C.WIDTH(CENTERWIDTH), DIMEN(DIMENSION))

DOLBY DIGITAL/DOLBY TRUEHD)

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired parameter.

■When selecting the "PANO"(PANORAMA) modeThis mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wallimaging. Select "OFF" or "ON"(default value:OFF).

■When selecting the "C. WIDTH"(CENTER WIDTH) controlThis adjusts the center image so it may be heard only from the center speaker, only from the left/right speakers as a phantomimage, or from all three front speakers to varying degrees. The control can be set in 8 steps from 0 to 7 (default value : 3).

■When selecting the "DIMEN"(DIMENSION)" controlThis gradually adjusts the soundfield either towards the front or towards the rear. The control can be set in 7 steps from -3 to+3 (default value : 0).

2. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to adjust the selected parameter as desired.

3. Repeat the above steps 1 and 2 to adjust other parameters.

EN

GLI

SH


52

When selecting “DRC DD”, “DRC THD”

• This function compresses the dynamic range of previouslyspecified parts of the Dolby Digital or Dolby TrueHD soundtrack (with extremely high volume) to minimize thedifference in volume between the specified and non-specified parts.This makes it easy to hear all of the sound track whenwatching movies at night at low levels.

■Notes: • These settings are valid only when the digital signals from

the Dolby Digital or Dolby TrueHD program source arebeing input.

• In some Dolby Digital softwares, these settings may not bevalid.

1. Press the CURSOR UP(▲)/DOWN(▼) buttonsto select the desired “DRC” mode, then press theENTER button.

■When selecting the "DRC DD"(DYNAMIC RANGE COMPRESSION DOLBY DIGITAL)

→ OFF : To turn off the DRC function↕

MID ↕

→ MAX

→ L(Low) : To decrease the front height channel level.↕

M(Mid) : To output the front height channel sound with ↕ standard sound volume level.

→ H(High) : To increase the front height channel level.

2. Press the CURSOR LEFT(◀)/ RIGHT(▶)buttons to adjust the dynamic rangecompression as desired.

When selecting “H.GAIN”

• You can adjust the front height channel level as desired.■Note: • This setting is valid only when listening in Dolby Pro Logic

IIz mode.

1. Press the CURSOR UP(▲)/DOWN(▼) buttonsto select the “H.GAIN”.

2. Press the CURSOR LEFT(◀)/ RIGHT(▶)buttons to adjust the front height channel levelas desired.

Higher compression

■When selecting the "DRC THD"(DYNAMIC RANGE COMPRESSION DOLBY TRUEHD)

→ AUTO : To adjust the dynamic range compression↕ automatically.

OFF : To turn off the DRC function↕

MID ↕

→ MAXHigher compression

EN

GLI

SH


53

• The HDMI connection can carry uncompressed digitalvideo signals and digital audio signals.

• Depending on whether the digital audio signals input intothe HDMI IN are output from the HDMI MONITOR OUT ofthis receiver or not, you should set the HDMI AUDIO OUTcorrectly.AMP : Not to output the HDMI digital audio signals from

the HDMI MONITOR OUT of this receiver, meaningthese signals are heard from the speakersconnected to this receiver.

THRU : To output the HDMI digital audio signals from theHDMI MONITOR OUT, meaning these signals areheard from the speakers of your TV.

■Note:• When the HDMI AUDIO OUT is set to THRU, no sound

will not be heard from the speakers connected to thisunit(except ROOM 2 speakers).

When selecting the HDMI AUDIO OUT

• The HDMI control function allows input selection of thisunit to be interlocked with the operation of the connectedcomponents.OFF : Not to use the HDMI CONTROL function.↕

ON : To use the HDMI CONTROL function.• When the HDMI CONTROL is set to ON, you can also use

the ARC(Audio Return Channel) function, enabling the TVto send the audio signals to this receiver via a HDMIcable.

■Notes:• The HDMI control function may not work depending on the

connected component and its settings.• To use the ARC function, the TV that supports the ARC

function of the HDMI 1.4 standards is required.• For details on HDMI CONTROL and POWER CONTROL,

refer to “CONFIRMING THE HDMI FUNCTION” on page35.

When selecting the HDMI CONTROL

SETTING THE HDMI

HDMI : AMP / THRU

CEC : OFF / ON

POWER : OFF / ON

RETURN

HDMI SETUP

• HDMI(HDMI AUDIO OUT) : To output the digital audio signals from the HDMI MONITOR OUT connector.• CEC(HDMI CONTROL) : To link operations with components connected to HDMI connectors and compatible with HDMI

control.• PWR(POWER CONTROL) : To link the power ON/OFF status of this unit to components.• RETURN : To return to the previous menu.


2. Press the CURSOR LEFT(◀)/RIGHT(▶)buttons to set the selected item as desired.

EN

GLI

SH

↕


EN

GLI

SH

54

• The Power control function allows the power status of this unit to be interlocked with the power ON/OFF and start of playbackof the connected components.OFF : Not to use the POWER CONTROL function.↕

ON : To use the POWER CONTROL function.

■Note:• The POWER CONTROL can be set only when the HDMI CONTROL is set to ON.

When selecting the POWER CONTROL


55

Troubleshooting GuideIf a fault occurs, run through the table below before taking your receiver for repair.If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consultyour dealer. Under no circumstances should you attempt to repair the receiver yourself. This could void the warranty.

EN

GLI

SH

PROBLEM POSSIBLE CAUSE REMEDYNo power

No sound

No sound from the surroundspeakers

No sound from the centerspeaker

No sound from the surround back(or front height) speakers

No picture

No picture with an HDMIconnection

Noise or distorted picture

Stations cannot be received

Preset stations cannot bereceived

Poor FM reception

Continuous or intermittent hissingnoise during AM reception,especially at night.

Remote control unit does notoperate.

• The AC input cord is disconnected.• Poor connection at AC wall outlet or the outlet is

dead or off.

• The speaker wires are disconnected.• The master volume is adjusted too low.• The MUTE button is pressed to ON.• Incorrect selection of input source.• Incorrect connections between the components.• The HDMI AUDIO OUT is set to THRU.

• The settings related to audio are set incorrectly.

• Surround mode is switched off(stereo mode).• Master volume and surround level are too low.• Monaural source is used.• Surround speaker setting is "NO".

• Stereo mode, etc is selected.• Center speaker setting is "NO".• Master volume and center level are too low.

• The input signal format or the current surroundmode cannot support the 7.1(or 6.1) surround.

• The surround back channels' power amplifier isassigned to "BIAMP" or "ROOM 2".

• Master volume and surround back (or front height)level are too low.

• Surround back(or front height) speaker setting is"NO".

• Video connections between this unit and themonitor TV are not made correctly.

• Incorrect selection of input source on the monitorTV.

• The settings related to video are set incorrectly.

• HDMI connection between this unit and themonitor TV are not made correctly.

• The monitor TV or other equipments do notsupport HDCP.

• Video format of your monitor TV, DVD player, etc.is different from NTSC.

• No antenna is connected.• The desired station frequency is not tuned in.• Antenna is in wrong position.

• An incorrect station frequency has been memorized.• The memorized stations are cleared.

• No antenna is connected.• The antenna is not positioned for the best reception.• Weak signals.

• Noise is caused by motors, fluorescent lamps orlightning, etc.

• Batteries are not loaded or exhausted.• The remote sensor is obstructed.

• Connect cord securely.• Check the outlet using a lamp or another

appliance.

• Check the speaker connections.• Adjust the master volume.• Press the MUTE button to cancel the muting effect.• Select the desired input source correctly.• Make connections correctly.• Set it to AMP. (For details, refer to "When

selecting the HDMI AUDIO OUT" on page 53.)• Set the settings correctly. (For details, refer to

"SETTING THE INPUT" on page 40.)

• Select a surround mode.• Adjust master volume and surround level.• Select a stereo or surround source.• Select the desired surround speaker setting.

• Select the desired surround mode.• Select the desired center speaker setting.• Adjust master volume and center level.

• Under the proper situations, perform the 7.1(or6.1) surround playback.(For details, refer to"ENJOYING SURROUND SOUND" on page 21.)

• Assign the power amplifier to the surround back(or front height) channels.(For details, refer to"When selecting the AMP ASSIGN"on page 38.)

• Adjust master volume and surround back (or frontheight) level.

• Select the desired surround back (or front height)speaker setting.

• Make proper video connections.

• Select the input source correctly.

• Set the settings correctly. (For details, refer to"SETTING THE INPUT" on page 40.)

• Make proper HDMI connection.

• This unit will not output video signal unless theconnected equipments supports HDCP.

• Change the video format to NTSC.

• Connect an antenna.• Tune in the desired station frequency.• Move antenna and retry tuning.

• Memorize the correct station frequency.• Memorize the stations again.

• Connect an antenna.• Change the position of the antenna.• Install an outdoor FM antenna.

• Keep the receiver away from noise sources.

• Install an outdoor AM antenna.

• Replace the batteries.• Remove the obstacle.


56

Specifications■AMPLIFIER SECTION• Power output, stereo mode, 6 Ω, THD 0.1 %, 40 Hz~20 kHz | 2× 80 W• Total harmonic distortion at -3 dB, 6 Ω, 1 kHz | 0.02%• Intermodulation distortion

60 Hz : 7 kHz= 4 : 1 SMPTE, 6 Ω, 80 W | 0.05%• Input sensitivity/impedance

Line (CD, AUX, VIDEO) | 250 mV/47kΩ• Signal to noise ratio, IHF "A" weighted

Line (CD, AUX, VIDEO) | 95 dB• Frequency response

Line (CD, AUX, VIDEO), 10 Hz ~ 90 kHz | +0, -3 dB• Output level

ROOM 2 OUT, 2.2 kΩ | 250 mV• Bass/Treble control, 100 Hz/10 kHz | ±10 dB• Surround mode, only channel driven

Front power output, 6 Ω, 1 kHz, THD 1.0 % | 80 W / 80W Center power output, 6 Ω, 1 kHz, THD 1.0 % | 80 WSurround power output, 6 Ω, 1 kHz, THD 1.0 % | 80 W / 80WSurround back /Front height / ROOM 2 power output, 6 Ω, 1 kHz, THD 1.0 % | 80 W / 80W

■DIGITAL AUDIO SECTION• Sampling frequency | 32, 44.1, 48, 96, 192 kHz• Digital input level

Coaxial, 75 Ω | 0.5 Vp-pOptical, 660 nm | -15 ~ -21 dBm

■VIDEO SECTION• Video format | NTSC• Input sensitivity(=Output level), 75 Ω

Video (Composite(normal)) | 1 Vp-p• HDMI connector | 19 pin

■FM TUNER SECTION• Tuning frequency range | 87.5~108 MHz• Usable sensitivity, S/N 30 dB | - 4 dBu• Signal to noise ratio, mono/stereo | 70 / 60 dB• Total harmonic distortion, 1 kHz, mono/stereo | 0.05 / 1.4 %• Frequency response, 17 Hz~12 kHz | ±3 dB• Stereo separation, 1 kHz | 40 dB• IF rejection ratio | 130 dB

■AM TUNER SECTION• Tuning frequency range | 520~1710 kHz• Usable sensitivity, S/N = 20 dB | 54 dBu/m• Signal to noise ratio | 40 dB• Selectivity | 50 dB

■GENERAL• Power supply | 120 V ~ 60 Hz• Power consumption | 2.5 A• Dimensions (WxHxD, including protruding parts) | 435x143x371 mm(17-3/8x5-5/8x14-5/8 inches)• Weight (Net) | 9.1 kg (20.1 Ibs)

Note: Design and specifications are subject to change without notice for improvements.

EN

GLI

SH


RD-7505

5707-00000-482-0S

AUDIO / VIDEO RECEIVER

7505(A) cover_cover.qxp 2010-10-14 오전 10:25 페이지 2

cover - parts express · 7505(a) cover_cover.qxp 2010-10-14 오전 10:25 페이지 1. e n g l i sh...

Documents