create 21c's new added value from flo · 2019. 8. 2. · 07 인증서 (certificate) systems 09...

Create 21C's New Added Value

From Flow

www.flotron.co.kr

Contents

Introduction

01 인사말 (CEO's Message)

02 회사소개 (Company Introduction)

04 비전 (Vision)05 조직구성 (Organization)

06 R&D Center

07 인증서 (Certificate)

Systems

09 Liquid Measurement Systems

16 Gas Measurement Systems

20 Human Machine Interface(HMI) System21 Calibration Equipment

22 Flotron Measuement and Control Systems

23 Relevant Industries & Main Customers

Products

24 PD Flowmeter

25 Vortex Flowmeter

26 Mag Flowmeter / BiFlow Flowmeter27 Mass Flowmeter / Thermal Mass Flowmeter

28 AOV / MOV

29 NF Series(Compact Size & Support CDMA,

Ethernet, WiFi, SD Card)

30 Gas & Steam Flow Computer NF750 / NF550

Batch Controller NF760 / NF560

Batch Controller NF770

31 Converter Series / Accessories

33 Filtration & Separation

Business Partners

36 해외 대리점 (Overseas Agency)

CEO's Message

안녕하십니까.주식회사플로트론대표이사장국진입니다.

주식회사플로트론은유체의흐름에서가치를창조한다는기업이념으로유량계측및플랜트시스템

부문에서다년간축적된기술력과풍부한경험을바탕으로지속적인성장발전을이루어왔습니다.

또한,끊임없는신기술개발과원천기술심화에집중함으로써유량계측기기및관련시스템의국산

화를성공적으로달성하였으며,이러한기술력을바탕으로국내유량계측시장을선도함은물론

국내외플랜트시스템분야에서글로벌기업으로성장해가고있습니다.

앞으로도창조와도전의자세로지속적인기술개발과인재육성에최선을다하여21세기국제경쟁력을

갖춘유량계측및시스템부문‘GlobalTopMaker'로서사명과역할을다할것으로약속드리며,

많은애정과관심으로주식회사플로트론이지속적으로성장해가는모습을지켜봐주실것을부탁

드립니다.

대표이사장 국 진

Hello, everyone. This is CEO Jang Kook-Jin of Flotron Corporation Ltd.

Flotron Corporation Ltd. has made continuous growth and advancement on the basis of its many years of accumulated technology and rich experience in the flowmeter and plant system part with its corporate vision to create value from the fluid flow.In addition, by focusing on the unyielding new technology development and in-depth original technology, Flotron has successfully accomplished the domestication of flowmeter equipment and related system, and on the basis of such technical strength, Flotron leads the domestic flowmeter market to grow into a global company in the domestic and overseas plant system field.

Flotron will be committed to do its best in continuous technology development and human resource development with its creative and challenging attitude to fulfill its misson and role as the "Global Top Maker' in the flowmeter and system field with the international competitiveness in the 21st century, and we wish to have your continuing affection and interest to watch Flotron to grow as the world's top notch company.

CEO Jang, Kook Jin

CEO's MessageSystemsProducts

Business Partners

01

1980

Company Overview

Company History

회사명 주식회사플로트론

대표자 대표이사장국진

설립일 2009.2.2

자본금 자기자본75억원

종업원 65명

공장규모 세종사업장:대지-10,131.70㎡,건평-5,515.08㎡

소재지 본사-서울시서초구서초대로56길34로

공장-세종사업장:세종특별자치시부강면

금호선말길73-11

주거래은행한국산업은행,국민은행,기업은행

1983. 05. 한국오발(주)설립

Establishment of OVAL Korea Limited

1985. 05. 계량기제작업인가

Acquisition of license for flowmeter manufacturing

1985. 12. 유망중소기업지정

Designation as a promising small-medium company

1986. 05. 국가교정검사기관지정

Designation as a authorized calibration laboratory by the government

1989. 02. 유량계KS인증획득

Acquisition of KS certificate for flowmeters

1994. 03. 유량계측연구소설립

Establishment of flow measurement research & development center

1995. 06. ISO9001인증획득

Acquisition of certificated ISO 9001

1995. 06. 세계일류화중점육성대상업체선정

Selected as the companies to be specially fostered to become first-class global business organizations by the government

1997. 09. 품질경쟁력우수100대기업선정

Selected as excellent quality competitiveness enterprise

Company Flotron Corporation Ltd.

CEO Jang, Kook Jin

Established Date Feb 2. 2009

Capital USD 6.7Million

Employees 65 Persons

Factory 1 Land Area - 10,131.70㎡ Building Aera - 5,515.08㎡

Location Head Office - Seoul, Korea Factory 1 - Sejong City, Korea

Major Correspondent Bank KDB, The Korea Development Bank KB, Kookmin Bank IBK, Industrial Bank of Korea

2000

2001. 03. 국가교정검사기관지정(ISO17025)

Designation as a authorized calibration laboratory by the government (ISO 17025)

2003. 01. 코스닥(KOSDAQ)등록

Registered in Stock Market of Korea Securities Dealers Automated Quotation (KOSDAQ)

2007. 01. 밸브조작기제어용오픈토르크리미터

(OPENTORQUELIMITER)특허취득

Acquisition of special permission, OPEN TORQUE LIMITER

2007. 03. 일본OVALCorp와합작계약해지독자기술력

확보및해외영업네트워크확장

Termination of the joint venture contract with OVAL Corp., (Japan) securement independent technology and expansion of overseas business network

2008. 08. 차압식양방향유량계신기술(NET)인증및유량계

국산화개발

Certification of new technology in differential two-way flow meter(NET) and development of domestic flow meters

2009. 02. 기존유량계측사업부문승계및

주식회사플로트론설립(기업분할)

Succession of existing flowmeter business part and incorporation of Flotron Corporation Ltd. (corporate spin-off)

1990

CREATE 21C's NEW ADDED VALUE FROM FLOW

INTRODUCTION 02

2010

2010. 08. 벤처기업지정-기술보증기금

Designation as a Venture Business (Korea Technology Finance Corporation)

2011. 08. World-ClassKorean(PlantEquipment&

MaterialSources)기업선정-지식경제부

Selected as World-Class Korean(Plant Equipment & Material Sources) by The Ministry of Knowledge Economy

2011. 12. 오백만불수출의탑,지식경제부장관표창장수상

Awarded "5 Million dollars Exporter" & Certificate of Commendation by The Ministry of Knowledge Economy

2012. 04. 기술혁신형중소기업선정(INNO-BIZ)-중소기업청

Selected as INNO-BIZ by Small and Medium Business Administration

2012. 12. 일천만불수출의탑,대통령표창,

지식경제부장관표창수상

Awarded "10 Million dollars Exporter" & Certificate of Commendation by President of Korea & Certificate of Commendation by The Ministry of Knowledge Economy

2013. 04. KOTRA글로벌브랜드업체선정

Awarded the KOTRA Global Brand

2013. 05. P300프로젝트선정ㆍ지식경제부,KOTRA

Selected as P300 Project by The Ministry of Knowledge Economy

2013. 09. 기술보증기금에서18.6억원투자유치

Successful Attraction of Investment from Korea Technology Finance Corporation (1.86 Billion won)

2013. 11. ISO14001인증획득-DAkkS

Acquisition of certificated ISO 14001

2014. 03. ISO9001인증갱신-DAkkS

Renewal of Certification ISO 9001 - DAkkS

2014. 06. 글로벌조달선도기업“P300프로젝트”선정

-지식경제부,KOTRA

Selected as global procurement leader - KOTRA

2014. 08. ISO17025인증갱신-KOLAS

Renewal of Certification ISO 17025 - KOLAS

2014. 10. OHSAS18001인증획득-DAkkS

Acquisition of Certification OHSAS 18001 - DAkkS

2015. 10. 쿠웨이트국영석유회사KNPC밴더등록완료

Completed Approval Vendor Registration on KNPC

2015. 10. 산업통상자원부장관표창장수상

Received Honorable Mention by the Minister of Industry and Commerce

2016. 10. ASMESTAMP취득

Acquired ASME Stamps (ASME U, S, PP Stamp)

2017. 07. 수출유망중소기업지정

Designated as Promising Small-Medium Sized Export Corporation

IntroductionSystemsProducts

Business Partners

03

비전(Vision)

“최고를 향한 새로운 흐름”

그동안축적된노하우와독자적인연구기술을바탕으로경쟁력을갖추고,시스템및환경산업부문을

육성하여기술주권을확립해나아가겠습니다.

“The new flow towards the first”In the meantime, we are equipped with competitiveness, and you rear systems and environmental industry section, and we establish technical sovereignty with bases, and we will go forward to from know-how and independent study technology accumulated that we accumulated.

“최고를 향한 창조의 흐름”

제품과기술의혁신을통해유량계측산업을주도할수있는혁신제품,사업,서비스,고객가치를창출해

나아가겠습니다.

“The best of our creative flow”We create an innovative product, a business, service, the customer value that can lead flow meter industry through a product and technical innovation, and we will go forward to.

“세계를 향한 역동적 흐름”

글로벌기술경영과끝없는혁신으로역동적인조직문화를구축하고,세계최고의기술경쟁력을자랑할수있는

기업이되겠습니다.

“Dynamic flow to the world”The company where we establish organizational culture to be dynamic by global technical management and endless innovation, and we can be proud of technical competitiveness of greatest in the world will become.

First

Best

Global


INTRODUCTION 04

조직구성(Organization)

경영지원팀Managing Support Team

경영지원부문Managing Support Division

영업1팀Sales 1Team

일반영업부문General Sales Division

영업2팀Filtration & Separation

울산교정센터Ulsan Calibration Center

영업3팀Sales 3Team (Ulsan)

플랜트영업팀Plant Sales

기술팀Engineering

플랜트사업부문Plant Division

조달팀Procurement

생산부문Production Division

품질경영팀Quality Management

생산팀Production

연구개발팀R&D

연구소R&D Center

교정검사팀Calibration Inspection

대표이사CEO

본사Head Office

세종사업장Factory, Sejong


Business Partners

05

R&D Center

설립연도 2009.2.2

연구원수 8명

규모 1,169.07㎡

R&D투자 7억(매출액대비6.5%)

보유기술

다양한유종을이용한FlowMeter측정기술,국내유일의Pipe

Prove기준부피측정(Calibration)기술보유,유량계및유량계교

정장치의설계및제작기술을바탕으로새로운측정장치의개발,

SmallVolumeProver의핵심기술인PulseInterpolation기법을적

용한자동측정장치운용,각종System설계및제작,전자계기설

계및제작,각종연산제어관련응용Software개발기술

Established Feb 2, 2009

Employees 8 Persons

Area Floor Space 1,169.07㎡

R&D Investment 7 hundred million won (6.5% of total sales)

Holding Technology

Flow measuring technique for various flow meter. Only holding technique for pipe prover calibration in Korea, Design & Manufacture technique for flow meter, calibration equipments, various kinds system, electric instruments. Application technique for small volume using pulse interpolation. Development technique for software related flow calculation.

연구소조직및설비현황(Organization & Facilities)

유량계측연구소

Flow Measurement R&D Center

연구개발

R&D

교정업무

Calibration

전자회로설계

Electronic Circuit Design

유량측정설비

Flow Measuring Facility

기계장치설계

Mechanism Design

유체측정연구

Fluid Measurement Research

전자계기운용

Electronic Instrument Application

액체유량교정

Calibration for Liquid

소프트웨어개발

Software Development

기체유량교정

Calibration for Gas

물 라인 - 최대 700㎥/hWater Line - Max. 700㎥/h

질량 라인 - 최대 90 t/hMass Line - Max. 90 t/h

등유 라인 - 최대 160 ㎥/hKerosene Line - Max. 160 ㎥/h

기체 라인 - 최대 4000 ㎥/hGas Line - Max. 4000 ㎥/h


INTRODUCTION 06

인증서(Certificate)

품질경영시스템인증서(GERMANCERTISO9001/DAkkS)CertificateofQualityManagementSystem

안전보건경영시스템인증서(GERMANCERTOHSAS18001/DAkkS)CertificateofOH&SManagementSystem

정보통신공사업등록증-서울시(LicenseorInformationandCommunicationWorksBusiness-Seoul-si)

미국기계학회인증서ASMEU,S,PPStamp

환경경영시스템인증서(GERMANCERTISO14001/DAkkS)CertificateofEnvironmentalManagementSystem

국제공인교정기관인증서(한국인정기구)Certificateofaccreditation(KoreaLaboratoryAccreditationScheme)

수출유망중소기업지정증(서울지방중소기업청장)PromisingExportFirmBytheSmall&MediumBusinessAdministrationRepublicofKorea

기업부설연구소인정서(한국산업기술진흥협회)Certificateofresearchinstituteattachedtocompany(KoreaIndustrialTechnologyAssociation)

표창장(대통령이명박)(PresidentialCitation)

07 IntroductionSystemsProducts

Business Partners

인증서(Certificate)

기술혁신형중소기업(INNO-BIZ)확인서-중소벤처기업부(CertificateofINNO-BIZ-MinistryofSMEsandStartups)

CE인증서(ElectromagneticFlowmeter)CertificateofCE(ElectromagneticFlowmeter)

특허증(특허청)Certificateofpatent(KoreanIntellectualPropertyOffice)


벤처기업확인서-기술보증기금(CertificateofVentureBusiness-KoreaTechnologyFinanceCorporation)

CE인증서(FlowComputer)CertificateofCE(FlowComputer)

계량기제작업등록증(세종특별자치시)Licenseofmeasuringinstrumentmanufacturer(TheprovinceofSejongSpecialSelf-GoverningCity)

형식인증서(한국기계전기전자시험연구원)Cert i f icate of Type(Korea Test ingCertification)


KOTRA보증브랜드(지식경제부,KOTRA)LicenseofmeasuringCertificateofKOTRYsealofexcellence(MinistryofKnowledgeEconomy&KOTRA)

상표등록증(특허청)CertificateofTrademarkregistration(KoreanIntellectualPropertyOffice)

실용신안등록증(CertifficateofUtilityModelRegistration-KoreanIntellectualPropertyOffice)


INTRODUCTION 08

Liquid Measurement Systems Measurement

Metering SystemsFlotron은 1980년대,국내기업최초로Custody

TransferMeteringSystem을package화하여설계,제

작및시운전을수행해오고있으며,현재까지유수의

global경쟁업체들과어깨를나란히하고있습니다.

플로트론은자체설계기술로고객의요구사항에해법

을제시하고,우리의축적된경험및knowhow를바

탕으로고객이최상의결과를얻을수있도록조언하고

있습니다.

당사의통합시스템은세계에서가장권위있는회사가

요구하는다양한측정,모니터링및샘플링을지원하

도록설계되었습니다.

CTMS는아래의Item들로구성이됩니다.

•VariousFlowMeters

•VariousValves

•VariousInstruments

•SupervisoryControlSystem

•Densitometers

•DataAcquisitionSystem

•AnalyzerSystem

•SamplingSystem

•ProvingSystem

•BS&WMonitors

Flotron has been designing, manufacturing and commissioning the Custody Transfer Metering System for the first time in Korea in the 1980s, and has been keeping up with the world's leading competitors to date.

With its own design technology, Flotron offers solutions to customer requirements and advises customers to have the best solution based on ouraccumulated experience and know-how.

Our integrated systems are designed to enable the most versatile measurement, monitoring and sampling required by the world's most prestigious companies.

The CTMS consists of the following items.•Various Flow Meters•Various Valves•Various Instruments•Supervisory Control System•Densitometers•Data Acquisition System•Analyzer System•Sampling System•Proving System•BS&W Monitors

Shalalah Methanol Profect (Oman, 2008) Takreer IRP-2 Project (UAE, 2011)


Business Partners

09

Liquid Measurement Systems

Loading/Unloading SystemsFlotron은증명된상,하단loading용multi-track장비,

공정제어및로딩시스템등Flotron자체기술을가지

고설계및system을제공합니다.특히Metering시스

템및측정장비를통합할수있는Loadingsystem을

제공합니다.

이러한완전한패키지의개념은서로다른공급업체가

같은사이트에참여하는경우에발생할수있는인터페

이스문제의위험을피할수있는장점이있습니다.

Flotron의기술은로컬실행반및컨트롤룸에서터미

날관리가가능합니다.이러한완전통합된시스템설

치는전체범위에대한안정적인서비스와상당한비용

절감효과를제공합니다.

장점

•완벽한테스트

•자동첨가제용량시스템

•터미널관리시스템

•통합구성요소제공

•단일소스공급,책임및보증

•전반적인운영비용절감

•향상된신뢰성및운영안전

•맞춤설계에따른사이트내제한공간사용고객의

요구사항에따라트럭LoadingStation의구성

•각종규정에적합한환경보호를위한설계

Flotron designs and supplies multi-track stations capable of both top and bottom loading with proven, leading edge technology, which incorporate metering equipment, process control and loading systems.

This concept of a complete package has the advantage for the customer of offering a single supplier for the whole installation, thus avoiding the risk of interface problems that can arise when different suppliers are involved on the same site.

Flotron's technology enables the terminal management at local operating station and control room. These fully integrated systems offer reliable service and significant cost savings for a complete range of installations.

Benefits

•Completely tested package•Automatic Additive Dosing System•Terminal Management System•Integration of Customer Components•Single source supply, responsibility and guarantee•Reduced overall operating costs•Improved reliability and operating safety•Compact design arrangement suited to the limited space constraints on site•Customized configuration of the truck loading station according to customer requirements•Environmental Protection Improvement Design Engineering in accordance with the customer and local Codes & Standards

Takreer IRP-2 Project (UAE, 2011) Cirrus Loading Facilities (Tema, Ghana, 2008)


SYSTEMS 10

Liquid Measurement Systemseasurement

Proving Systems

유량계는정확한측정을위한보정이보장되어야합니

다.이러한목표를달성하기위해ProvingSystem은유

량계의측정성능의연관된불확실성을줄이기위해설

계되어야합니다.수년간의측정및검증에대한경험

을토대로Flotron은석유산업의수많은중요Custody

Transfer설비의유효성에대하여정확한Proving

System을개발하는것으로잘알려져있습니다.

Flotron은송유관,유조선,탱크,바지선등의장소에이

동식또는고정식ProvingSystem을완벽하게제공합

니다.

양방향,컴팩트Proving에대한기술력을통해서

Flotron의ProvingSystem은통합구성요소가높은측

정우수성을보장하며업계에서선도적인역할을하고

있습니다.

FlotronProvingSystem은운영효율성을개선시키며,

정확한CustodyTransfer측정과운영비용을줄입

니다.

Flowmeters need to be calibrated to secure accurate measurement. To accomplish this, proving systems are designed to reduce the uncertainty associated with meter performance.

With its years of measurement and verification experience, Flotron is well known for developing accurate proving systems to validate the numerous critical custody transfer applications.

Flotron offers complete portable or stationary proving systems for pipelines, tankers and barge loading and unloading operations and refineries.

By using bidirectional and compact proving technologies, Flotron proving systems can provide incorporate industry-leading components to ensure the highest measurement accuracy.

With Flotron proving systems, customers are satisfied with improved operational efficiency, reduced operating cost for accurate custody transfer measurement.

KNOC 30" Bi-directional (Yeosu, Korea, 2010) Takreer RRE#3 Compact Voluem Prover (UAE, 2011) Dopco Tank Prover (Korea, 2012)

Shalalah Methanol Project 26"Bi-directional (Oman, 2008)


Business Partners


Highlighted ReferencesMetering System

DELIVERY YEAR AREA PROJECT / CLIENT APPLICATION

2016 KSAKEMYA SEP sSBR Project DIC / Al-Jubail Petrochemical Company (KEMYA)

RainicMetering System

2015 KSASAMAC MMA-PMMA Project CTCI / Saudi Arabian Methacrylates Company (SAMAC)

EthyleneMetering System

2014 KSAYanbu Power & Desalination Plant Ph.3 ProjectSECL / Saline water Conversion Corporation

HFO, LFOMetering System

2013 IraqAmmara 4x125MW 9E Gas turbine Power Plant Project STXHI / Republic of IRAQ Ministry of Electricity

LDOMetering System

2013 UAETAKREER RRE Utilities & Offsites (Pkg #3) Project SECL / Abu Dhabi Oil Refining Company (TAKREER)

Liquefied ButaneMetering System


Crude Oil Metering System

2012 KSAMARAFIQ STG Unit 5&6 Project HENC / MARAFIQ

Service Water Metering System

2012 KSAPTC Jubail Polisilicon Metering System (MARAFIQ) Portable HEC / KCC / Ploysilicon Technology company (MARAFIQ)

Potable Water, Seawater Metering System

2011 UAETAKREER Inter Refinery Pipeline-2 Project GSEC / Abu Dhabi Oil Refining Company (TAKREER)

Oil, LPG Metering System

2011 KSARabigh Power Plant No.2 Project DHIC / SEC(Saudi Electricity Company)

Diesel, Heavy Oil Metering System

2011 SingaporeJURONG ROCK CAVERN PHASE 1 Project HDEC / Jurong Town Corporation

CrudeOil, Condensate Metering System

2011 KSASAMCo, Acrylic Acid ProjectSECL / SAMCo, Acrylic Acid complex

Propylene, Buthanol Metering System


Propylene Metering System

2011 KSAExport & Import Product (Propylene) Pipe Project AYTB Co., Ltd / Tasnee Petroleum Company & S-Chem

Propylene Metering System

2010 KSAMARAFIQ STG Unit 5&6 Project HENC / MARAFIQ

Service Water, Waste WaterMetering System

2010 KSATasnee Ethylene Pipeline Project FLUOR / Saudi Polymers Company

Ethylene Metering System

2009 South KoreaTest Facility for a Water Turbine's Efficiency Project K-WATER / K-WATER

Water Metering System

2009 IranianOffshoreIOOC PSU ProjectSTXdalian / IOOC

Crude Oil Metering System

2009 KSAAmmonoa Pipeline ProjectCHEMANOL / CHEMANOL

Ammonia Metering System

2008 ThailandHMC Polypropylene Project Line-3GSEC / HMC Polymers Company

PropyleneMetering System


SYSTEMS 12

Liquid Measurement Systemseasurement

Highlighted ReferencesMetering System

Ammara Power Plant Project (lraq, 2013)

Marafiq STG Units 5&6 Project (Saudi, 2012)

SEP sSBR Project (KSA, 2016) YanbuIII Project (KSA, 2014)

Takreer RRE#3 (Butane) Project (UAE, 2013)

MGP-1 Project (Oman, 2012) Takreer RRE#3 Offsites & Utility Project (UAE, 2011)

Takreer IRP-2 Project (UAE, 2011)

JRC Project (Singapore, 2013)

Takreer RRE#3 Crude Oil Project (UAE, 2012)

Export & Import Product Project (Saudi, 2011) IOOC FSU1003 Project Metering System (Iran, 2010)


Business Partners


Highlighted ReferencesTruck Loading System


2018 KoreaTHE ProjectHanwha E&C / Hanwha Chemical

Liquid ResidueWaste Water

2017 KoreaDe-Aromatization Solvent ProjectKFS / Hanwha Total

Mass Meter D-40, D-60,D-80, D-100, D-120

2017 KoreaHigh Purity n-Heptane ProjectKFS / Hanwha Total

Mass Meter n-Heptanen-Hexane ISO-Hexane

2014 TurkmenistanTORE (Turkmenbashi Oil Refineries Complex) Project HEC / Turkmenbashi Oil Processing Complex (TNGIZT)

Mass Meter Gasoline

2013 UzbekistanUGCC (Ustyurt Gas Chemical Complex) Utilities & Offsites Plant ProjectHEC / Uz-Kor Gas Chemical

Mass Meter Heavy HC, NGL, LPG

2012 ThailandPP (Petroleum Production) Project UAC / SCT Co. LTD

Mass MeterLPG, NGL

2012 OmanMusandam Gas Plant (MGP) Project HEC / Oman Oil Company Exploration & Production LLC(OOCEP)

Mass MeterLPG

2011 UAETAKREER Inter Refinery Pipeline-2 ProjectGSEC / Abu Dhabi Oil Refining Company (TAKREER)

Mass MeterOil, LPG

2011 KSACA/ECD ProjectDIC(EMERSON) / Arabian Chlor Vinyl Company

Local Type & MMICaustic Soda 50% & Other

2011 UAEHabshan-5 U&O ProjectHDEC(EMERSON) / GASCO

Local Type PD Meter

2009 AlgeriaSkikda Refinery ProjectSECL / SONATRACH (NAFTEC SPA)

Local TYpe & MMI Toluene

2009 IndiaIOGR C2, C3/C4 Extraction ProjectToyo Boeki Machinery Ltd. / ONGC

Local Type & MMILPG Propane

2009 GhanaTAKORADI Loading Gantry ProjectG-TEC Co., Ltd. / CIRRUS OIL SERVICES

Local Type & MMIGasoline, G.Oil

Proving System


2013 UAETAKREER RRE Utilities & Offsites(Pkg #3) Project SECL / Abu Dhabi Oil Refining Company (TAKREER)

Small VolumeButane Custody Transfer Meter


Small VolumeCrude Oil Metering System

2012 OmanMusandam Gas Plant (MGP) ProjectHEC / Oman Oil Company Exploration & Production LLC (OOCEP)

Small VolumeCrude Oil, LPG Metering System


Small VolumePropylene Metering System

2009 South Korea30 inch Bi-Directional Pipe Prover ProjectKNOC / KNOC

Bi-DirectionalFlow Metering System

2009 Iranian OffshoreIOOC FSU ProjectstxDALIAN / IOOC

Bi-DirectionalCrude Oil Metering System


SYSTEMS 14


Highlighted ReferencesTruck Loading System

Proving System

De-Aromatization Solvent Project (South Korea, 2017)

UGCC Project (Uzbekistan, 2013)

Takreer IRP-2 Project (UAE, 2011)

MGP Project (Oman, 2012)

High Purity n-Heptane Proejct (South Korea, 2017)

PP Project (Thailand, 2012)

C3/C4 Truck Loading Facility (India, 2009)

IOOC FSU1003 Project Bi-directional Pipe Prover (Iran, 2010)

Takreer RRE#3 Crude Project (UAE, 2012)

TORE Project (Turkmenistan, 2014)

Habshan-5 U&O Project (U.A.E, 2011)

Takoradi Loading Gantry Prohect (Ghana, 2009)


Business Partners

Gas Measurement Systems

세계적으로에너지가부족하여,천연가스가격이계속

상승하는상황에서,가스의사고파는양뿐만아니라,

가스의성분즉가스의질또한매우높은정확도를가

지고측정하는것이매우중요합니다.

매일파이프라인을통해서매우많은양의천연가스가

흐르는상황에서,아주작은오차도구매자또는판매

자쪽으로매우큰손실을가져올수있습니다.

Flotron의가스측정System과제품들은측정오차를

줄이고,신뢰성을주며작업자의데이터를효과적으로

관리할수있고,상거래용으로사용할수있습니다.

초기디자인부터,테스트,시운전까지Flotron은최선

의결과를얻기위해최고의기술을모든System에적

용하며,System전체에대해서책임을지고있습니다.

•Orifice유량계

•초음파유량계

•질량유량계

•터바인유량계

•관리와정보수집System

•완전한패키지로구성

Under the rapidly growing consumption of natural gas all over the world, it is of critical importance to know, to a very high degree of accuracy, not only the quantity of gas bought or sold, but also the "quality," as it is the gas composition which decides the gas price.

Very large quantities of natural gas move through pipelines every day. A very small error in measurement can result in a very significant loss of revenue to the seller or the buyer.

Flotron's gas measurement systems and products are designed to decrease the uncertainty of the measurement error and provide reliable, traceable data for operational efficiency and custody transfer. From initial design up to testing and commissioning, Flotron provides single-source responsibility to every system it builds by integrating the leading technologies for maximum results, including:

•Orifice Flowmeters•Ultrasonic Flowmeters•Mass Flowmeters•Turbine Flowmeters•Control and Data Acquisition Systems•Complete Instrumentation Packages

KNPC NERP Project(Kuwait, 2007) Tasnee Project(Saudi, 2006) KNPC NERP Project(Kuwait, 2007)


SYSTEMS 16


에너지측정

Flotron은BorderStations,가스정제분야의Outlet,가

스그리드Inlet부분과같은대규모거래에있어서,에

너지측정이중요한포인트라는것을이해하고있습니

다.온라인가스크로마토그래픽을사용하는방법과비

교해볼때,전통적인GasMeteringSystem은직접에

너지를측정할수없습니다.

그러나,실험실에서오프라인으로계산된값보다는온

라인에서계산되어진에너지값이부피식유량계와결

합되어상거래에서정확도를상당히증가시킵니다.

최고의전문가와뛰어난경험을바탕으로,Floton은최

고의품질,정확도,성능을가진가스측정의해법을제

공합니다.

가장복잡하고고객요구사항이많은측정System일

지라도,Flotron은정확한디자인,프로젝트수행능력,

가장효과적이고경제적인방법으로지원과서비스를

제공합니다.

•Orifice유량계

•초음파유량계

•질량유량계

•Flow노즐

•미터튜브

•터빈유량계

•Orifice플랜지유니온

•기타부속품및보조서비스

Energy MeasurementFlotron understands that energy measurement is of key importance in large-scale transaction points, such as border stations, gas refinery outlets and gas grid inlet points.

Unlike typical, traditional gas metering system. Flotron suggests incorporated gas measurement solution that consists of flow meter and online gas chromatograph at the point of metering. Coupled with the volumetric, flow results generated from the meter, the system can calculate energy flow online, rather than offline at a laboratory, to substantially increase the accuracy of related financial transactions.

•Orifice Meters•Ultrasonic Meters•Coriolis Flowmeters•Flow Nozzles•Meter Tubes•Turbine Flowmeters•Orifice Flange Unions•Other Gas Conditioning Accessories and Ancillary Servicesservices

DongHae Gas Project(Korea, 2003)


Business Partners


Highlighted References


2015 AzerbaijanSOCAR Ammonia and Urea Complex Project SECL / State Oil Company of Azerbaijan Republic (SOCAR)

Natural GasMetering System

2014 KuwaitAz zour north IWPP ProjectHHi / Shamal Az-Zour Al-Oula K.S.C

Natural Gas, Fuel OilMetering System

2013 OmanMusandam Gas Plant Project(MGP) - AdditionalOOCEP / Oman Oil Company Exploration & Production LLC (OOCEP)


2013 UAETakreer Carbon Black Delayed Coker ProjectSECL / Abu Dhabi Oil Refining Company (TAKREER)

Natural Gas, Propane LiquidMetering System

2013 MexicoInterGen ACS Power ProjectSECL / InterGen


2012 BangladeshCompressor Station ProjectHEC / Gas Transmission Co., Ltd(GTCL)


2012 OmanMusandam Gas Plant (MGP) ProjectHEC / Oman Oil Company Exploration & Production LLC (OOCEP)

Crude Oil, Natural Gas, Fuel GasMetering System

2012 KSASOCC Aluminium Alkyls Project (SOCC AA)SECL / SOCC

Hydrogen, Ethylene, NitrogenMetering System

2011 UAEFERTIL Expansion Project (FERTIL-2) ProjectSECL / FERTIL


2010 AlgeriaArzew Refinery Rehabilitation & Adaptation ProjectHENC / SONATRACH


2008 SingaporePower Seraya Cogen CCP 30&40 ProjectSamsung C&T / PowerSeraya

SteamMetering System

2006 KuwaitKNPC New Ethane Recovery Plant ProjectHDEC / KNPC

EthaneMetering System

2006 KSASHARQ 3rd Expansion, Ethylene Glycol ProjectSECL / Eastern Petrochemical Company (SHARQ)

Oxygen Gas, Ethylene GasMetering System

2006 KSATASNEE Petrochemicals Ethylene ProjectSECL / TASNEE Petrochemicals



SYSTEMS 18


Highlighted References

InterGen ACS Project (Mexico, 2013)

SAMAC MMA-PMMA Project (KSA, 2015)

Musandam Gas Plant (MGP) Project (OMAN, 2012)

Arzew Refinery Rehabilitation & Adaptation Project(Algeria, 2010)

MGP-2Project (Oman, 2013)

SOCAR Ammonia and Urea Complex Project(Azerbaijan, 2015)

SOCC AA Project (Saudi, 2011)

HMC Polypropylene Project (Thailand, 2008)

Takreer CBDC Project (UAE, 2013)

Az zour north IWPP Project (Kuwait, 2014)

Fertil2 Ammonia/Urea Expansion Project (U.A.E, 2011)

KNOC East Sea Metering System (Korea, 2007)


Business Partners

Human Machine Interface(HMI) System

HMI란설비및PLC,DCS등의시스템에서취득한데

이터를공정화면,트렌드등으로사용자가이해할수

있는방식으로표현하고사용자가내린제어명령을

PLC나DCS로전달함으로써작업자(Human)와기계

(Machine)를연결(Interface)하는역할을수행합니다.

Metering,Proving,Batch,TruckLoadingSystem등

다양한플랜트들을효율적으로운영하기위해서는각

System에최적화된HMI솔루션이필요합니다.

Flotron은수많은국내외유량계측시스템구축경험을

바탕으로플랜트의설비를안정적으로운영할수있도

록높은신뢰성과다양한기능을겸비한제어감시시스

템을제공하고있습니다.

Flotron에서제공하는HMISystem은플랜트규정을준

수한그래픽화면과직관적인메뉴로구성되어있어작

업자의작업효율향상과조작실수로인한손실을최소

화할수있습니다.

HMI System 도입효과

•각종정보의실시간취득및이력정보제공으로관리

효율향상

•Alarm&Event등각종경보제공으로현장신속한

현장대응가능

•제어계통을통해관리함으로써작업자와System간

Interface간소화

•각종Button,Menu,Trend제공으로사용자의

직관적판단이용이(Monitoring)

•SafetyArea,CentralControlRoom등어떠한

장소에서도설비모니터링가능

•설비자동설정에의한품질균일화및생산성

향상(BatchSystem)

HMI expresses the data obtained from the equipment and systems, such as PLC and DCS, method easily/readily comprehensible to the users and plays a role of interfacing between human and machine by transmitting control commands of users to PLC or DCS.

As optimized HMI solution is necessary for each system to efficiently operate a variety of plants such as metering, proving, batch and truck loading system.

Flotron provides control and monitoring systems, which have high reliability and a variety of functions, based on a number of experiences in the establishment of flow measuring systems in Korea and abroad, in order to operate equipment of plants in stability.

As the HMI system manufactured by Flotron is composed of graphic screens and intuitive menus, complying with plant regulations, it may increase working efficiency of workers and minimizes the loss caused by operational errors.

Effects of HMI System

•Increases the efficiency of management by obtaining various information in real-time and providing history information•Provides various alarms such as malfunction to enable speedy counter-actions at the site•Simplifies the interface between operators and system by managing control systems in integration•Makes easiness of intuitive judgment by providing various Button, Menu, trends (Monitoring)•Monitoring of equipment can be made at any place such as safety area, Central Control Room and so on•Homogenization of quality and productivity increase by automatic equipment setting (Batch System)

Intuitive screen structure

Trend analysis

Alarm & Event Monitoring

Provision of variousd database

Supports various print outformats such as Excel, Text, etc.


SYSTEMS 20

Calibration Equipmentasurement

References

에네스지 / ENESG (Korea, 2013)Measured flow rate : Max. 4500m3/h

한국기계연구원 / KIMM (Korea, 2013)High pressure safety valve test equipment

한국수력원자력 / KHNP (Korea, 2012)SCP / SIP Pump shock test equipment

한국수자원공사 / K Water (Korea, 2008)Measured flow rate : Max. 2700m3/h


Business Partners

Flotron Measuement and Control SystemsCustomer's Approval

ADWEAApproval

SECRegistration undergoing

KNPCApproval

ZADCORegistration undergoing

ARAMCORegistration undergoing

ADCORegistration undergoing

KOCRegistration undergoing


SYSTEMS 22

ADNOC (Takreer integrated in ADNOC) SABIC PETRONAS

Relevant Industries & Main Customers

Oil & Gas

Industrial Energy

Power

Chemical

Refining

Marine Water & Wastewater


Business Partners

Products

PD FlowmeterKP Series용적식유량계는여러종류의유량계중에서가장많이

사용되고있으며,높은정밀도와사용하기쉬운유량계

입니다.본유량계는공업용이나상거래용으로도사용

하고있습니다.

KPO SeriesKPOSeries는구경(Size)이다양하며유량계본체의

재질이StainlessSteel류와CarbonSteel류의주조품

으로되어있어보다경제적인가격으로구성되어있

습니다.

Positive Displacement Flowmeter is the leading applications than other flowmeter. It has high accuracy and easy handling also. It can be used to measure industrial and commercial transation.

Meter Size 25mm(1B) to 100mm(4B)Material Stainless Steel, Carbon SteelPower Supply 12 ~ 35V DC Battery Type(Option)Flow Output Pulse, AnalogFlow Range 0.3 to 180㎥/hOperation Temp. -10 ~ +120℃Operating Press. Max. 0.98MPaAccuracy ±0.2 or ±0.5%

The size of KPO Series is various. It is cost effective because the material of body is Stainless Steel or Carbon Steel casting.

Meter Size 10mm(3/8B) to 200mm(8B)Material Carbon Steel, Stainless SteelPower Supply 12 ~ 35V DC Battery Type(Option)Flow Output Pulse, AnalogFlow Range 0.2 to 340㎥/hOperation Temp. -10 ~ +200℃Operating Press. Max. 6.3MPaAccuracy ±0.2 or ±0.5%


PRODUCTS 24

Products

KPS Series - 나선형(Spiral Type)KPSSeries나선형유량계는계량실내부가특수형상

인나선형(Spiral)형상으로구성되어있어타방식인

용적식유량계에비해맥동이나소음이적으며고정도

의계측을할수있습니다.

Vortex FlowmeterKV Series와유량계는유체의흐름에삼각주등과같은장애물을

설치하고발생되는와류를이용하여주파수를감지하

여유속을측정하는유량계로서기체,액체,스팀등의

유체에광범위하게사용되고있습니다.

KPS Series has a measuring chamber that consists of special shaped two spiral rotors that generate no pulsation in fluid flow. Therefore, it has extremely low vibration level and operating noise, and can measure little flow very accurately.

Meter Size 25mm(1B) to 300mm(12B)Material Cast Iron, Carbon Steel, Stainless SteelPower Supply 12 ~ 35V DCFlow Output Pulse, Analog Battery Type(Option)Flow Range 1.8 to 900㎥/hOperation Temp. -20 ~ +200℃Operating Press. Max. 4.0MPaAccuracy ±0.2 or ±0.5%

Vortex Flowmeter has a sensor of piezo-element. It has a trigonal prism (delta body) that is right-angled to flow direction of fluid.Measures the flowrate of gas, low viscosity liquid and steam in high accuracy.

Meter Size 15mm(1/2B) to 300mm(12B)Material Carbon Steel, Stainless SteelPower Supply 12 ~ 35V DCFlow Output Pulse, AnalogFlow Range 0.3 to 2,300㎥/hOperation Temp. -30 ~ +300℃Operating Press. Max. 5.0MPaAccuracy ±1.0%

IntroductionSystems

ProductsBusiness Partners

25

Mag Flowmeter전자유량계(MagFlowmeter)는페러데이법칙을이용

하여자기장과그자기장의직각방향으로도전체에유

도된전압의크기,자속밀도,유체의속도등을이용한

원리의유량계로서상하수도,하수처리장,폐수처리장

등에널리사용되고있습니다.

BiFlow FlowmeterKB Series - 차압식유량계BiFlowFlowmeter는차압을이용한유량계로구동부

가없어에너지손실이적으며내구성이우수하여,고

온,고압및대형관경에삽입형으로사용하기매우편

리합니다.

Mag FlowmeterThe Faraday Laws of Induction, which states that an induced electromotive force is generated in a conductor when it moves through a magnetic field, form the basis for the electromagnetic flowmeter measurements. This measurement principle is applied to a conductive fluid that flows in a pipe in which a magnetic field is generated perpendicular to the flow direction. It can be sued to accurately measure the flowrate of liquids, paper pulp, slurry and mineral slurry which has an electrical conductivity greater than 5㎲/cm.

Meter Size 3mm(1/10B) to 1,000mm(40B)(upto DN2200)Material Lining - HR, PTFE, PFA Electrode - Stainless Steel, Hastelloy, Tantalum, Titanium, PlatinumPower Supply 85 ~ 253V ACFlow Output Pulse, Analog, RS485, HARTFlow Range 0.1 to 27,000㎥/hOperation Temp. -25 ~ +130℃Operating Press. Max. 4.0MPaAccuracy ±0.5 or ±0.25%

BiFlow Flowmeter is a kind of differential pressure type flowmeter. It has high durability because no driving elements. The insertion type is more convenient to install on high temperature, high pressure and big size pipe.

Meter Size 80mm(3B) to 300mm(12B)Material Carbon Steel, Stainless SteelPower Supply 12 ~ 45V DCFlow Output Analog, HARTFlow Range 18 to 2,500㎥/hOperation Temp. -40 ~ +300℃Operating Press. Max. 9.8MPaAccuracy ±1.0%

Products


PRODUCTS 26

Mass Flowmeter질량유량계는SensorTube를고유진동수로진동

시키는Drivemagnet와2개의U형Tube,위치검출

Sensor,온도검출로구성되어있습니다.유체가tube

내로통과되면진동방향과역방향으로Coriolis힘이발

생하여뒤틀림이생기며,뒤틀림의진폭은질량유량에

비례합니다.

즉,유속이빠르면뒤틀림의진폭은커지고,이진폭을

위치Sensor로검출하는방식의유량계입니다.

Thermal Mass Flowmeter고성능열식질량유량계는산업현장에서가스의흐름

을감지하고,유량의측정,조정등의장소에적용합니

다.직접적인질량유량측정으로별도의온도,압력보

상이필요없습니다.

PD FlowmeterMass Flowmeter provides accurate, continuous, direct measurement of mass, density, temperature. Patented dual U-shaped tubes provide outstanding sensitivity to Coriolis forces. The omega shapes produce tensional loading instead of bending loading for improved reliability.

Meter Size 4mm(1/8B) to 100mm(4B)Material Stainless Steel, Hastelloy C-4Power Supply 100 ~ 230V AC/12~36V DCFlow Output 2-Analog, 1-PulseIterface RS485, HART, Foundation FieldbusFlow Range 3~300kg/HR to 650~6500kg/HROperation Temp. -20 ~ +200℃Operating Press. Max. 35MPaAccuracy ±0.1%Explosion design ATEX, IECEx, cCSAus, ATEX Zone2

The high performance Thermal Mass Flowmeter flow body eliminates velocity profile distortions; swirl and temperature stratifications in the gas steam and reduce the amount of upstream piping required for accurate flow measurement.

Meter Size 25mm(1B) to 300mm(12B)Material Stainless SteelPower Supply 24V DCFlow Output Analog, High-Low RelayFlow Range 190 to 24,500㎥/hOperation Temp. -10 ~ +80℃Operating Press. Max. 3.4MPaAccuracy ±2.0%

Products

27 IntroductionSystems


AOV(Air Motor Operated Valve Actuator)현장에설치되어있는기존의수동밸브에간단히부착

하여원격조정및자동화밸브로바꾸어사용할수있

는최신의공기모터식밸브액츄에이터입니다.구동원

이공기이므로방폭지역및정전시에도사용이가능합

니다.

MOV(Motor Operated Valve Acuators)•Adopt advanced frequency inversion technique achieve flexible start and stop, completely get rid of water hammer;

•Velocity and moment can be adjusted bidirectionally and independently, Huge adjustable range decreases lectotype difficulty and spares costs for users greatly;

•Flexible control mode, not only supports bus control but also satisfies with the control of switching values and analog quantities. Besides, it can be fit for many kinds of complicated renovation projects;

Simply be mounted on the existing manual valves currently installed on sites and makes them possible for remote and automatic control. Employed air-driven mechanism, it may be operational in areas prone to explosions or during power failure.

Valve Size 100A(4B) AboveApplicable Valve Gate, Globe, Ball, Butterfly ValveMaterial Cast Aluminum

Type A (공기식 현장 조작형 A)Air local control (Open/Close switch on actuator bady)

Type B (공기식 원격 조작 판넬형 B)Air remote control (Open/Close switch panel)Type C (전기식 사무실 조작 판넬형 C)

An electrical remote control panel type (Open/Close switch panel)

•Electric parts have sufficient capacity of resisting disturbance and pro-tecting against shock. It makes the execuring agency run very stably and puts the end to the electric fence pollution.

•Extra high positioning accuracy. Even under the circumstances of total distance (multi-turn) of 2 rounds, it can be 1%.

•Widely functions of watching over and self-diagnostics. Help users obtain the current states of execuring agency fast and accurately, even the valves.

•Perfect function of safety protection. Prevent incorrent manipulations and minimize the damages of system emergency failure.

•Concise and effective human-computer interaction interface with non-intrusive design. Make it very easy to achieve on-side installation and debugging.

•Reliable circuit design and simple mechanical structure bring up a super long useful time.

Products


PRODUCTS 28

Flow computerNF7Series와NF5Series는단일

Hardware를사용하여Software의변경만으로Flow

Indicator, flowComputer,BatchController등다양

한용도로사용할수있도록설계된다기능산업용

Computer입니다.본제품은Pulse,Analog,RTD등의

입력신호를수신하여내부의고성능Microprocessor

를통한연산을수행하고Pulse출력,Relay출력및

4-20mA,RS232,RS422,RS485등의출력을지원하

여주변기기와의접근성을높인기기입니다.부가기

능으로는CDMA,Ethernet,WiFi등유무선동신기능

과SDCard저장기능(NF7Series)이있습니다.각모

델들은사용목적에따라분류됩니다.당사에서생산되

는Vortex,PDMeter,MagFlowmeter,Bi-Flowmeter

는물론Turbine,Mass,Orificeplate,Averagingpitot

tubes,wedgesflowmeter등을포함한다양한유량계

로부터의입력을처리합니다.

Flow Indicator NF730 / NF530NF730/NF530Flow Indicators는정확성이요구되는

넓은범위의유량을편리하게표시하는데사용됩니다.

대부분의유량계로부터Pulse나Analog출력신호를

받아순시량과적산량을지시합니다.

Liquid Flow Computer NF740NF740FLowcomputer는온도보장식을사용하여표

준상태에서의부피유량을구할수있으며비교적적은

비용으로Turbinemeter나PDMeter등의부피식유

량계의유량입력과온도입력으로높은정도의질량유

량연산이가능합니다.NF740은일반석유제품과LPG

를포함하는API/ASTM방정식을내장하고있어각제

품에적절한적용되어집니다.

PD FlowmeterFlow Computer NF7 Series and NF5Series are the multi-functional industrial computers that are designed to be used for a variety of purposes, such as flow indicator, flow computer and batch controller, only by changing the software, suging the same hardware. This product performs arithmetic operation through an inside high performance microprocessor, receiving input signals, such as pulse, analog and RTD, and increases accessability to peripheral devices by supporting the outputs of pulse, relay and 4-20mA, RS232, RS422, RS485, etc.. It has additional functions of wired and wireless communications with CDMA, Fthernet, WiFi, ect., and of Sd card saving (NF7Series). Each model is classified in accordance with purpose of use. Vortex, PD Meter, Mag Flowmeter and Bi-Flowmeter produced by our company process inputs from different kinds of flowmeter including turbine, Mass, Orifice plate, averaging pitot tubes and wedges flowmeter.

The NF730/NF530 Flow Indicator can handle a wide range of flow applications, where high accuracy and flexibility are required. It will interface to most flowmeters and versions are available for pulse and analog inputs.

The NF740 Flow computer can calculate volume flow rate of standard condition by using a temperature compensation formula, and also can calculate mass flow rate with high accuracy by entering flow rate and temperature from volumetric flowmeters such as turbine meter and PD Meter at relatively low cost. As NF740 has a built-in API/ASTM equation including general petroleum products and LPG, it can be applied properly to each product.

NF Series(Compact Size & Support CDMA, Ethernet, WiFi, SD Card)

Products



Gas & Steam Flow computer NF750 / NF550CalorimeterNF750/NF550기계용Flowcomputer는다음의연산

방정식으로가스와스팀(응축수포함)에대한보상을

합니다.

보일&샤를의이상기체방정식에의한온도압력보상

(압축성무시)

GeneralGas:redlich-kwong방정식을이용한압축

계수계산

NaturalGas:NX-19방정식을이용한압축계수계산

SteamEquation :표준방정식을이용하여증기와

응축수의비중(Specific volume)과엔탈피(Specific

Enthalpy)를구하고질량과열량을연산

Batch Controller NF760 / NF560NF760/NF560BatchController는유량계로부터주파

수신호를받아서1단또는2단ON-OFF밸브와결합

하여일정량의유체출하를자동적으로제어하는정량

제어기입니다.전면부5개의Button으로Batch량을설

정할수있으며출하의시작과정지를손쉽게제어할

수있습니다.

Batch Controller NF770NF770BatchController는온도보상식을이용하여표

준상태의부피유량을환산하고두개의제어밸브를

사용하여액체유량을정량제어할수있다.NF740와

같이보상기능과NF760의BatchControl기능을결합

한제품으로주로석유화학제품이나LPG등의거래에

사용합니다.

Ex EnclosuresSpecifications

Model:KEB-NFSeries

OutsideDimension : 290mm(W) * 295mm(H) *265mm(D)

ExplosionProof:ExdIIBT6

Protectionclass:IP65

Material:CastAluminumAlloy

The NF750/NF550 Steam and Gas Flow Computer incorporates the following compensation equations for gas and vapours:

Ideal Gas : Law using temperature and pressure correction, but where compressibility correction is not required.General Gases : where compressibility is calculated using the Redlich-Kwong state equation.Natural Gas : using the NX-192 equation to calculate super compressibility.Steam Equations : for both saturated and superheated steam. Mass and energy flow rates are calculated using standard equations to determine the specific weight and enthalpy of steam.

The NF760/NF560 Batch Controller accept frequency flow signals and automatically control the batching the fluids via a one or two stage control valve. The instruments are extremely flexible and easy to operate, with five keys, front panel operation that enables the batch quantity to be set, and batches to be started or stopped.

The NF770 Batch Controller, converts volumetric flow rate of standard condition by using a temperature compensation formula and can make fixed quantity control of fluid flow by using 2 control valves. It is mainly used for dealing of petrochemical products or LPG, combining a compensation function like in the NF740 and a batch control function same as NF760.

Products


PRODUCTS 30

Converter SeriesPulse-Analog converterF/IConverter는유량계로부터발생되는PulseSignal

을받아순시량을보여주고기록하거나관리하기위하

여Pulse를Analog또는전압신호로변환하는데사용

합니다.

Pulse DistributorPulseDistributor는유량계로부터발생되는Pulse

Signal을받아다른종류의PulseSignal로변환하여

출력합니다.

TC300 [Flow Indicator]유량적산지시계(TC300)은유량계에서무단위PULSE

/Analog신호를받아서이를단위화(Scaler)하여유

량적산값,Non-Reset유량적산값및순시유량값

등을지시하며선택사양에는Pulse출력,4~20mA출

력,Relay출력및RS485통신이가능한소형다기능

Panel용기기입니다.

AccessoriesStrainerStrainer는이물질이나찌꺼기등으로인한유량계의

파손을방지하기위해보통유량계의전단부에설치를

해야합니다.

This instrument (F/I Converter) is used to receive pulse signals generated by the flowmeters and to convert the pulse signals into analog current or voltage signals, in order to display, record or control the flow rate.

This instrument (F/F converter) receives an outputted signal from the flowmeter, shapes it, and provides electrically different output signal transmitting isolated Pulse signal outputs.

Flowindicator(TC300) from the flow meter PULSE / Analog indicates accumulated value, Non-Reset accumlated value, and instantaneous flow rate.Optional outputs are Pulse, Analog(4~20mA), Relay and RS485 communication.TC300 is compact and multi-function instrument for Panel.

To Prevent potential damage to the flowmeter by foreign suspended solids in the fluid being metered, it is usually necessary to install a strainer immediately upstream of the meter.

Products



Large Strainer대형Strainer로써배관내에흡입된공기를배출하는

기능이있고,압력계를이용하여여과망의고형물질의

막힘상태를알수있습니다.

Flow LimiterFlowLimiter는주로석유제품에대한TankTruck등

으로의LoadingLine에사용되며,유체의압력을오리

피스단면적에의해자동으로조절하여,설정된유량이

초과되지않게함으로써유량계의정도와내구성을유

지시킵니다.

Flow Straightener

FlowStraightener는배관의상태(Elbow,Reducer등

의유무),펌프종류등에의해발생되는와류및불

균등한유속분포에따라큰영향을받는Turbine

Flowmeter,VortexFlowmeter유량계의안정적인유속

흐름을위하여사용됩니다.

This Large Strainer has functions to exhaust infected air in pipe. And users can check the state of screen by using the pressure gauge whether it is clogged owing to suspended solids.

Flow Limiters are mainly used in the loading of petroleum products to tank trucks. With an orifice area that automatically adjusts to line pressure, specific maximum flow rates are maintained protecting the flowmeter's accuracy and durability from excess flow rate.

Flow Conditioner

A flow straightener is a straightening device designed the make a flow stream of fluid relatively free of turbulence, thereby permitting flow rate measurements by a Turbine meter or Vortex flowmeter, which is susceptible the eddies, circular flows, ununiform distribution of flow velocity, etc. created by existing pipeline arrangements (elbows, reducers, valves, etc.) or by the type of pumps used, always under consistent conditions.

Products


PRODUCTS 32

FILTRATION & SEPARATION

Filters, Separators & Coalescers플로트론은여과및분리에대한총체적인서비스를제

공하고있습니다.자체적으로기술력을보유하고있을

뿐아니라,특수제품의경우세계각국의파트너사와

의협력관계를통해서비스를제공하고있습니다.

플로트론은필터엘레멘트선정에있어서특정브랜드

혹은특정타입의제품에국한되지않고각각의프로젝

트에대해가장적합한제품을선정하여고객에게제안

하고있습니다.

다음은플로트론이취급하는제품목록입니다.

•CartridgeFilters(Metallic,Non-Metallic)

•BasketFilters(P.Plate,Mesh,Screen)

•MediaFilters(ActivatedCarbon,Sand,Nutshell)

•Coalescers(Gas-Liquid,Liquid-Liquid)

•VaneTypeSeparators(Standard,DoublePocket)

•Strainers(Automatic,Manual)

Not only through well experienced in-house application engineers, but also with cooperation and support of partners world-wide who had technical agreements for special items, Flotron is able to provide a total solution for filtration and separation requirements.

As Flotron is not bound to one specific brand of filter elements, and not limited to certain type of products, Flotron is capable of providing proposal for the most suitable solution for each application.

Followings are the items in Flotrons’ product list :

•Cartridge Filters (Metallic, Non-Metallic)•Basket Filters (P.Plate, Mesh, Screen)•Media Filters (Activated Carbon, Sand, Nutshell)•Coalescers (Gas-Liquid, Liquid-Liquid)•Vane Type Separators (Standard, Double Pocket)•Strainers (Automatic, Manual)




Pressure Vessels필터,쎄퍼레이터,코알레서등의하우징및저장탱크

등을압력용기로제작이가능합니다.플로트론에서

제작하는MeteringSystem의구성요소인Filter,Air

Eliminator등은ASME코드에따라설계되고제작됩

니다.

PressureVessels의제작에요구되는ASMEUStamp

를보유하고있습니다.그래서자체적으로제작이가능

한시스템이되어있습니다.

플로트론은고객이요구하는각종코드를시스템적으

로분석/적용하여여과및분리장치기계류제작을하

고있습니다.

The housing for the filters, separators & coalescers and the storage tanks can be in pressure vessels. All filters and air eliminators in the metering system are engineered and manufactured in accordance with ASME code.

With the ASME U Stamp which Flotron acquired in year 2016, in-house fabrication of pressure vessels with U stamping, which is a common requirement in this field of industry, is available.

Not only full comprehension of the applicable code, but also deep study on clients’ specification and requirements is followed in order for Flotron to complete the filtration & separation equipment.


PRODUCTS 34


StrainersStrainer는부식물,스케일,용접잔류물,모래등의이

물질로부터중요한장치/기계를보호하기위해개스라

인및액체라인배관에설치됩니다.

일반적으로펌프,유량계,여러종류의컨트롤밸브,스

팀트랩,스프레이노즐,터바인,열교환기등의장치/기

계의전단에설치됩니다.

Flotron은단조및주물자재뿐만아니라파이프/플레

이트를기반으로한제작품으로Strainer를제작하고있

으며,다음과같은타입의제품을취급하고있습니다.

•BucketTypes

•Y-Types

•T1,T2&T3-Types

•C1&C2-Types

•FlatTypes(BirdScreen)

•AutomaticStrainers

Strainers are installed on gas or liquid pipelines to protect equipments from foreign particles such as rust, scale, weld slag, sand, etc.

It is usually installed upstream of equipments such as pumps, flow meters, various control valves, steam traps, spray nozzles, turbines, heat exchangers, etc.

Flotron supplies strainers in Forged materials, Casting materials and Pipe/Plate Fabricated materials for the following types :

•Bucket Types•Y-Types•T1, T2 & T3-Types•C1 & C2-Types•Flat Types (Bird Screen)•Automatic Strainers



해외대리점(Overseas Agency)

Undergoing

Tukey터키

Syria시리아

Lebanon레바논

Israel이스라엘 Jordan

요르단

Kuwait쿠웨이트 Bahrain

바레인

Qatar카타르

Arab Emirates아랍에미리트

Saudi Arabia사우디아라비아

Oman오만

Yemen예멘

Iraq이라크

Iran이란

Amenia아르메니아

Malaysia

Kazakhstan Algeria

Oman

UAE

Thailand

Uzbekistan Egypt

Iran

KSA

Indonesia

Singapore

Taiwan

Vietnam

Kuwait

IRAQ


BUSINESS PARTNERS 36

www.flotron.co.kr

Rev.4(2018.08)

주소ㆍAddress

|본사ㆍHeadOffice

(06633)서울특별시서초구서초대로56길34(서초동)

Tel(02)3470-5801~9Fax(02)583-9671,522-6317

(Seocho-dong)34,Seocho-daero56-gil,Seocho-gu,Seoul(06633)

Tel82-2-3470-5801~9Fax82-2-583-9671,522-6317

|공장ㆍFactory

세종사업장(SejongFactory)

(30077)세종특별자치시부강면금호선말길73-11

Tel(044)275-6600Fax(044)275-5550

73-11,Geumhoseonmal-gil,Bugang-myeon,Sejong-si(30077)

Tel82-44-275-6600Fax82-44-275-5550

|울산영업소ㆍUlsanOffice

(44722)울산광역시남구도산로31(달동)

Tel(052)267-7055,3081Fax(052)267-3080

(Dal-dong)31,Dosan-ro,Nam-gu,Ulsan(44722)

Tel82-52-267-7055,3081Fax82-52-267-3080

|울산교정센터ㆍUlsanCalibrationCenter

Tel82-52-267-7062

FlotronCorporationLtd.

Contents

Introduction

01 인사말 (CEO's Message)

02 회사소개 (Company Introduction)

04 비전 (Vision)05 조직구성 (Organization)

06 R&D Center

07 인증서 (Certificate)

Systems

09 Liquid Measurement Systems

16 Gas Measurement Systems

20 Human Machine Interface(HMI) System21 Calibration Equipment

22 Flotron Measuement and Control Systems

23 Relevant Industries & Main Customers

Products

24 PD Flowmeter

25 Vortex Flowmeter

26 Mag Flowmeter | BiFlow Flowmeter27 Mass Flowmeter | Thermal Mass Flowmeter

28 AOV | MOV

29 NF Series(Compact Size & Support CDMA,

Ethernet, WiFi, SD Card)

30 Gas & Steam Flow Computer NF750/NF550

Batch Controller NF760/NF560

Batch Controller NF770

31 Converter Series | Accessories

33 Filtration & Separation

Business Partners

36 해외 대리점 (Overseas Agency)

create 21c's new added value from flo · 2019. 8. 2. · 07 인증서 (certificate) systems 09...

Documents