cultivator shanks d-15 - bigham agbighamag.com/bbwp/wp-content/uploads/2013/10/d-15-shanks.pdf ·...
TRANSCRIPT
Cultivator Shanks D-15
Standard Features:• Straight shanks, side offset shanks, and rear offset shanks are available in two
sizes. (1 x 3” and 3/4 x 2-1/2”)• Shanks are cut from H-5160 Alloy material, giving our shanks approximately
30% more yield strength than shanks constructed from C-1080 steel. H-5160 is the same material that the leaf springs on your pick-up are made from.
• Durable ductile foot piece features a trip out mechanism to avoid unnecessary damage. Sweep mount is uniform.
• Bigham No-Twist™ Foot Piece holds our Bigham Hi-Wing Buster rock steady on a variety of 1x3” shanks without a buster block.
• All bolts are zinc plated for rust prevention.
Bigham offers a wide selection of cultivator shanks to suit virtually any need. High quality cultivator shanks are built for long service in the field.
8"7"
90.0°�
8"
90.0°�
26-1/4"
35-1/4"
3
55.0°�
5-1/4"
8-1/2"
19-1/4"
14-3/4"
34"
4
5"
50.0°�
18-1/2"
6"
11-1/2"
30"
5
Straight Shank Assemblies P/N Shank Size Ship Wt.
1. 705-300 1 x 3 x 34” 38 lbs. 705-300N (No Twist™ Foot Piece) 2. 705-200 3/4x2-1/2x30” 20 lbs. Side Offset Shank Assemblies
P/N Shank Size Offset Side Ship Wt.3. 705-308 1 x 3” 8” LH 40 lbs. 705-309 1 x 3” 8” RH 40 lbs.4. 705-301 1 x 3” 5” LH 40 lbs. 705-302 1 x 3” 5” RH 40 lbs.5. 705-201 3/4x2-1/2” 4” LH 21 lbs. 705-202 3/4x2-1/2” 4” RH 21 lbs.
705-300N 1x3” Shank shown at right features the Bigham No-Twist™ Foot Piece.
30"1-1/2"
1-1/2"3/4"
1"
2-1/2"
9/16"
9/16"SlottedHole
2
4-1/2"
34"
1"
1"
9/16"
11/16"
3"
705-300N
705-300 / 705-200
1
© 2013 Bigham. Design and specifications subject to change without notice.
Eight Inch Side Offset Shanks on Extended Clamps
D-16
Bigham offers a wide selection of shanks. Please call for custom order information.
Cultivator Shanks
50.0°�
7"
34"
15-3/8"
18-5/8"
7-5/8"
7 Rear Offset Shank Assemblies P/N Shank Size Ship Wt.7. 705-303 1 x 3 x 34” 42 lbs. 705-304 (W/No-Twist™ Foot Piece)
705-303
705-304
Rear Mounted 1x3” Shanks with Standard Foot Pieces
Rear Offset 1x3” Shanks with No-Twist™ Foot Piece and Hi-Wing Busters
Sweeps on 1x3” Shanks.
Bigham No-Twist™Foot Piece
Bigham No-Twist Foot Piece is notched to hold our Bigham High-Wing Buster steady, without a buster block. The busters are precision ground to fit this notch for a tight, solid fit.
BIGHAM • 705 E. SLATON ROAD • P.O. BOX 3338 • LUBBOCK, TX 79452 • (806) 745-03841220 EAST DURKEE STREET • CARLISLE, AR 72024 • (870) 552-7517