curriculum vitae 1. - fkm.utm.mynoordin/s/noordin's cv updated.pdf2 nmycv updated 150508 4....

NMYCV updated 150508 1

CURRICULUM VITAE 1. Personal Data

Name: Noordin bin Mohd. Yusof Position: Professor Citizenship: Malaysia Race: Malay Sex: Male Marital Status: Married with 4 children Office Address: Research Management Center or Faculty of Mech. Engineering,

Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia

Telephone No.: 07-5537803 (RMC office)

07-5534697 (FME office) Fax No.: 07-5537811 (RMC office)

07-5566159 (FME office) Email: [email protected]

2. Academic Qualifications

Qualification University/Institution Year

Ph. D. (Mech. Eng.) Universiti Teknologi Malaysia, Malaysia 2003 M. Sc. (Adv. Manuf. Tech.) Cranfield Institute of Technology, UK 1990 B. Mech. Engg. (Hons.) Universiti Teknologi Malaysia, Malaysia 1986 2nd Class Upper

3. Professional Membership

Member, Society of Manufacturing Engineers USA & Institution of Engineers Malaysia


4. Field of Expertise

Machining Processes, Quality Improvement Techniques, Statistical Quality Control, Experimental Design, Production Operations Management, Sustainability

5. Research Interest

Machinabilty Studies, Hard Turning, Operations Management, Sustainability Studies 6. Work Experience

Academic Experience Period Position Organisation March 2009 to present Professor Fac. of Mechanical Engineering,

Universiti Teknologi Malaysia April 1995 to March 2009 Assoc. Professor Fac. of Mechanical Engineering,

Universiti Teknologi Malaysia March 1990 to April 1995 Lecturer Fac. of Mechanical Engineering,

Universiti Teknologi Malaysia July 1987 to February 1990 Asst. Lecturer A Fac. of Mechanical Engineering,

Universiti Teknologi Malaysia Industrial Experience

Period Position Organisation

3/1987 - 6/1987 Technician Matsushita Industrial Corporation

Duties include establishing work methods and time standards for the manufacture air conditioners, conducting productivity improvement activities including giving training in basic Industrial Engineering to fellow technicians. Was also involved in Quality Control Circle activities.

8/1986 - 10/1986 Quality Engineer Harris Semiconductor Malaysia

Exposed to and given quality responsibilities for all hermetic operations. Designed process audit checklist, was a member of the task force for implementing SPC.


7. Administrative Experience at UTM

Position held Year

1. Deputy Director (Project Management), Research Management Center 2009 – present

2. Head of R & D Cluster (Advanced Materials and Manufacturing), Research Management Center 2006 – 2009

3. Head of the Department of Production & Industrial Engineering, Faculty of Mechanical Engineering 1993 – 1994, 1989 – 1991

4. Head of Production Engg. Panel 2004 – 2006, 1996 – 1998, 1994, 1992 – 1993

5. Head of the Faculty of Mechanical Engineering Central Store 1987 – 1988

6. Coordinator of the Faculty of Mechanical Engineering Resource Center 2004 – 2007

7. Member of the Faculty of Mechanical Engineering IDB Tender Technical Evaluation and Coordination Committee 2004

8. Member of the Faculty of Mechanical Engineering Academic Committee 2004 – 2006, 2009 – present

9. Member of the Faculty of Mechanical Engineering Administrative Committee 2004

10. Member of the Faculty of Mechanical Engineering Curriculum Committee 2004 – 2006

11. Member of the UTM’s Senate Standing Committee on Library 2005 – 2008

12. Member of the UTM’s Technical Committee 2009 – present

Additionally, has previously held various positions in numerous other committees at the department, faculty, university and national levels.

8. Teaching and Laboratory Supervision Experience

Name of subject at B. Eng. level

Advanced Quality Engineering (SMI 5843)


CAD/CAM/CNC Laboratory

Data Analysis in Industrial Engineering (SMN 2813)

Industrial Engineering (SME 3813)

Manufacturing Processes (SME 3713)

Materials Handling

Metrology and Quality Control (SMR 3713)

Production Planning and Control (SME 4853)

Project Management

Project Management and Maintenance (SMN 4842)

Quality Engineering (SMR 3712)

Simulation

Name of subject at M.Eng. level

Production Operations Management (MMP 2643) M. Eng.

Manufacturing Science (MMP 1653) M. Eng.

Quality Engineering (MMN 1313) M. Eng.

Advanced Quality Engineering (MMP 1673) M. Eng.

Additionally have supervised the conduct of numerous laboratory experiments and modules relating to production engineering, metrology and industrial engineering,

9. Post Graduate / Undergraduate Supervision Experience

Post Graduate (Ph. D)

1. Hassan Abdelwahab Abdelkarim

Development and Performance Evaluation of Diamond Coated Tool when Turning MMC Material

On-going

2. Thirumurugan +

Manikam Development of a Methodology for Measuring the Sustainablility of a Manufacturing Process

On-going

3. Adnan Hj Bakri* + Integration of Total Productive maintenance (TPM) and Six-Sigma

On-going

4. Rival* Performance Evaluation of New Drill Geometry in Drilling of Inconel 718

On-going

5. Ahmad Kamely Mohamad

The Effectiveness of Coatings when Machining Hardened Cold Work Tool Steel AISI D2 (60 HRC)

2008

6. Amrifan Saladin* Performance Evaluation of Coated and Uncoated 2008


Mohruni Carbide when End Milling of Aerospace Material

7. Thet Thet Mon* Modeling of Stagnant Zone Formation on Diamond Cutting Tool when Turning Titanium Alloy

2007

Post Graduate (M. Eng.)

1. Mohd. Zulkhaairi Tukimin

Nickel Interlayer Coating Development for Diamond Coated Tungsten Carbide

On-going

2. Azhan Khalid+ Taguchi's Design of Expriment for Tolerance Stack Analysis

On-going

3. Yussof Mahal* + Critical Path Analysis (CPA) for Marine Project Planning and Implementation

On-going

4. Mohd Fauzi Mohamed* +

Comparative Study of Japanese Based Company Quality Practices versus Local Malaysian Companies

2008

5. Denni Kurniawan Performance Evaluation of Coated Carbide Cutting Tools when Turning Hardened Tool Steel

2008

6 Rival* Electrical Discharge Machining of Titanium Alloy using Copper Tungsten Electrode with SiC Powder Suspension Dielectric Fluid

2005

Post Graduate (M. Eng. (Mech.-AMT))

1. Rosedi Ibrahim Application of Total Productive Maintenance (TPM) in Factory Maintenance

On-going

2. Ayoob Ahrari Chromium Interlayer Coating Development for Diamond Coated Tungsten Carbide

2010

3. Mehdi Mohammadzadeh Sari

EDM of Tool Steel with the Inclusion of Carbon Nanotubes

2010

4. Mohd. Rosmaini Shaari

Effect of Edge Preparation when Hard Turning Tool Steel

2010

5. Ahmad Dzia’uddin Mohamed

Effect of Tool Lengths on Surface Roughness in Internal Profile Turning

2010

6.

Norfaizem Ibrahim Effect of Tool Lengths on Surface Roughness in Turning Application

2010

7. Mohd. Rozaimi Ismail

Surface Integrity Investigation when Grinding Mild Steel

2010

8. Azri Azman Turning of Hardened Steel using Carbides 2010

9. Abdulghadar A.M. Awheda

Development of a User Guide for an Ultra Precision Diamond Turning Machine and

2007


Evaluation of Mirror Profiles Turned

10. Hendriko Experimental Study on the Effects of Cutting Edge Preparation when Turning Hardened Steel

2007

11. K. Muniswaran K. Seveen

Performance Evaluation of Ceramic Cutting Tools when Turning Hardened Steel

2007

12. Effendy Tool Wear and Tool Life Performance of TiAlN Coated Carbide Cutting Tools when Turning XW 42 Hardened Tool Steel

2007

13. Wan Emri Wan Abdul Rahaman

Performance Evaluation of Ceramic Cutting Tools when Turning Hardened Steel

2006

14. Tang Yu Cai Performance Evaluation of Coated Carbide Cutting Tools when Turning Hardened Tool Steel

2006

15. Affandi Mohd Zainal Performance Evaluation of Wiper and Conventional Coated Ceramic Cutting Tools when Turning Hardened Steel

2006

16. Dwi Augustina Development of a Generic Framework for Developing a Quality Management System (QMS) for Small Manufacturing Organisations

2006

17. Saiful Bahri Abd. Jamil

Performance Evaluation of Ceramic and PCBN Cutting Tools when Turning Hardened Steel

2004

18. Mukhtar Malik* Turning Modified Titanium with Al2O3 Coated Cemented Carbide (Widia DCMT 11304)

2004

19. Rozaimi Bin Mohd. Saad*

Kajian Pembentukan Tegasan dan Anjakan Pada Matalat pemotong Disebabkan oleh Parameter Pemotong Menggunakan Kaedah Unsur Tak Terhingga (FEA)

2003

Post Graduate (M. Eng. (I E))

1. Saman Jafartayari Sustainabilty Awareness Assessment in Malaysian Manufacturing Industries

2010

2. Norafifah Husin Application of DOE Techniques in the Two-Step Pretreatment Process for Diamond Coating

2009

3. Noor Adila binti Aluwi Shakir

Application of DOE Techniques in the Single Step Pretreatment Process for Diamond Coating

2009

Post Graduate (M. Sc. (EBM, SEAL))

1. Nithian Kumar Kasava

Turn Around Time Reduction at an Aircraft Maintenance, Repair and Overhaul Workshop

On-going

2. Saravanan G Jayaraman

Implementation of Total Productive Maintenance (TPM) at Integrated Heat Spreader (IHS) Process

2010

3. Satian S/O Rong Effectiveness of Vehicle Maintenance System in 2010


Malaysian Army: A Case Study at Army Divisional Workshop

4. Kaharuddin bin Katan

Improvement of Supply Chain Management for ‘B’ Vehicle Spares in Malaysian Army

2009

Note: * Co-supervisor + Part time Others are main/sole supervisor Undergraduate

Currently Supervising 6 Completed Supervising More than 60

The supervision of the above undergraduate final year projects encompasses various topics such as Quality Improvement in Manufacturing Companies involving techniques such as Design of Experiment, Statistical Process Control, Quality Function Deployment, Six Sigma and PDCA Cycle; Application of Industrial Engineering Techniques in Manufacturing Companies such Method Study, Work Measurement, Project Management, Production and Inventory Control; Quality Management; Machinability Studies and CAD/CAM Applications.

10. Research Experience

Name of project Period Role

1. Investigative Study on the Use Electrodeposited Interlayers for Diamond Coated WC Substrates (FRGS) (RM48,000) 2010-2012 Project Leader

2. Development of New Shaping Technique for Thin and Thick Diamond Films (Nippon Sheet Glass Foundation For Materials Science & Engineering) (73333) US $3,000 2009-2011 Project Leader

3. Feasibility Study of Using Vegetable Oil as a Cutting Lubricant Through the Use of Minimum Quantity Lubricant during Machining (IRPA 78055) RM50,000. 2007-2009 Project Member

4. Performance Evaluation Of Advanced Finish Sanding On Wood Surface (IRPA 79065) RM234,917 2006-2008 Project Member

5. High performance blended membranes using a novel preparation techniques (IRPA 79037) RM187,996 2006-2008 Project Member

6. Determination of the optimum cutting conditions for coated carbide and ceramic cutting tools when


turning hardened tool steel (IRPA 74268) RM109,000. 2004-2007 Project Leader

7. Development of endmills, drills and turning tools from ultrafine grained carbides and oxides for aerospace, automotive and mold & die applications (IRPA 74545) RM679,200. 2004-2007 Project Member

8. Development of ultra-thin coated precision cutting tools for turning and milling (IRPA 74546) RM2,170,000. 2004-2007 Project Member

9. Development of new binderless diamond coated wheels for ultra precision grinding (IRPA 74540) RM3,629,560. 2004-2007 Project Member

10. Production of flat and hollow fiber membranes for biodialysis membranes (IRPA 74246) RM189,000. 2003-2005 Project Member

11. Performance evaluation of carbide tools on machining aerospace materials - Titanium alloys (IRPA 74122) RM195,940. 2003-2005 Project Member

12. Comparison of the Immobilised Technique with Free Cell Fermentation in Lactic Acid Production (IRPA 75089) RM 47,000 2004-2005 Project Member

13. Production of composite hollow fiber membranes for bioseparation (IRPA 74170) RM186,000. 2003-2006 Project Member

14. Ultra-Precision Turning of Symmetrical and Non-Symmetrical Silicon Surfaces for Laser Application (IRPA 74218) RM153,200. 2003-2006 Project Member

15. Fabrication of laser crystal for electro-optic application (IRPA 74530) RM2,000,000. 2002-2008 Project Member

16. Ductile mode grinding and polishing of aspheric, toric, and plane surfaces on glass and silicon (IRPA 74065) RM198,560. 2002-2005 Project Member

17. Performance evaluation of new diamond tools for Malaysia’s precision industries (IRPA 72255) RM266, 950. 2000-2002 Project Member

18. Machinability database and performance evaluation of advanced cutting tools for Malaysian manufacturing industries (IRPA 72196) RM289,750. 1999-2003 Project Member

11. Consultancy Experience

Name of project Year Role


1. CNC equipment acquision by Fac. of Mechanical Engineering, Kolej Universiti Kejuruteraan dan Teknologi Malaysia 2004 Advisor

2. Evaluation of carbide tools when endmilling tool steel for Precisetech Sdn. Bhd. 2004 Project member

3. Simulation studies for the production of flanges for TWP 1997 Group Leader

4. A proposal for the philosophy of operation and acquisition of a rapid prototyping system for the Bureau of Innovation and Consultancy, UTM 1996 Project Member

5. Feasibility study of a Marine Technology Business Academy for Penang Shipbuilding and Construction 1996 Project Member

6. Setting upof assembly facilities for water pump (MD 172270) 4G1 assembly for Syarikat Rahman Brothers Industries 1996 Project Member

7. Workshop layout and equipment specification for Tenaga Nasional Berhad 1994 Project Member

8. Reverse engineering and CAD of a rear car lamp for OrcaDesign Consulatant 1994 Project Member

9. Setting up CAD/CAM facilities at Kolej Ugama Sultan Zainal Abidin 1992 Project Member

10. Feasibilty study on the manufacture of electric motors for Bank Industri 1988 Project Member

12. Publication

Journal

1. Kurniawan, Denni, Yusof, Noordin Mohd. and Sharif, Safian (2010), Hard Machining of Stainless Steel Using Wiper Coated Carbide: Tool Life and Surface Integrity, Materials and Manufacturing Processes, 25: 6, 370 – 377

2. Ani Idris, Nursia Hassan, Suriani Mohd Ismail, Effaliza Misran, Noordin Mohd Yusof. (2010). Photocatalytic Magnetic Separable Beads for Chromium (VI) Reduction. Water Research, 44 (6) 1683-1688.

3. Kamely, M.A., Noordin, M. Y., Ourdjini, A., Venkatesh, V.C. (2008). Alternative Low Cost Cutting Tools for Hard Turning of AISI D2. Journal of Advanced Manufacturing Technology, 2(2): 29 -37.

4. Ahmad Kamely Mohamad, Noordin Mohd Yusof, Ali Ourdjini, Vellore Chelvaraj Venkatesh (2008). The effectiveness of coatings when turning hardened cold work tool steel AISI D2 (60 HRC). International Journal of Machining and Machinability of Materials, 4 (1): 63 – 75.

5. Noordin Mohd Yusof, Affandi M. Zainal, Hendriko, Denni Kurniawan (2008) Hard Turning of Cold Work Tool Steel using Wiper Ceramic Tool, Jurnal Mekanikal, Jld. 25, 92-105.


6. M.A. Kamely, M.Y. Noordin, V.C. Venkatesh (2007). The effect of multiple pass cutting on surface integrity when hard turning of AISI D2 cold work tool steel. International Journal of Precision Technology, 1: 97 – 105.

7. M.Y. Noordin, D. Kurniawan, S. Sharif (2007). Hard turning of stainless steel using wiper coated carbide tool. International Journal of Precision Technology, 1: 75 – 84.

8. M.Y. Noordin, Y.C. Tang, D. Kurniawan (2007). The use of TiAlN coated carbide tool when finish machining hardened stainless steel. International Journal of Precision Technology, 1: 21 – 29.

9. M.Y. Noordin, V.C. Venkatesh and S. Sharif (2007), Dry turning of tempered martensitic stainless tool steel using coated cermet and coated carbide tools. Journal of Materials Processing Technology, 185: 83–90.

10. Md. Fauzi Bin Ahmad, Sha’ri Mohd Yusof & Noordin Mohd Yusof (2007), Comparative Study Of Quality Practices Between Japanese And Non–Japanese Based Electrical And Electronics Companies In Malaysia: A Survey. Jurnal Teknologi, 47 (A) Dis. 2007: 75–89.

11. Ani Idris, Norashikin Mat Zain, M.Y. Noordin (2007), Synthesis, characterization and performance of asymmetric polyethersulfone (PES) ultrafiltration membranes with polyethylene glycol of different molecular weights as additives. Desalination, Volume 207, Issues 1-3, 324-339

12. Ani Idris, Suzana Wahidina and M.Y. Noordin (2006), Application of two-level full factorial design to lactic acid production using immobilized lactobacillus delbrueckii from pineapple waste. Journal of Science and Technology In the Tropics. JOSIT.Vol 2 No 1 June 2006

13. Ani Idris, Farida Kormin and M.Y. Noordin (2006). Application of response surface methodology in describing the performance of thin film composite membrane. Separation and Purification Technology, 49 (3): 271-280.

14. M.Y. Noordin, V.C. Venkatesh, S. Sharif, S. Elting and A. Abdullah. (2004). Application of Response Surface Methodology in Describing the Performance of Coated Carbide Tools when Turning AISI 1045 Steel. Journal of Materials Processing Technology. 145: 46-58.

15. M.Y. Noordin, V.C. Venkatesh, S. Sharif, D. Sarathy and A. Abdullah. (2004). Cutting Performance of Coated Diamond and Triangular-Shaped Carbide Inserts when Turning AISI 1045 Steel. Pertanika Journal of Science & Technology. Supplement 12(1): 73-84.

16. Ani, I., Noordin, M.Y., Ismail A.F. and Shilton, S.J. (2002). Study of Shear Rate Influence on the Performance of Cellulose Acetate Reverse Osmosis Hollow Fiber Membranes. Journal of Membrane Science. 202: 205-215.

17. Ani, I., Ismail, A.F, Noordin, M.Y., and Shilton, S.J. (2002). Optimisation of Cellulose Acetate Hollow Fiber Reverse Osmosis Membrane Production Using Taguchi Method. Journal of Membrane Science. 205: 223-237.

18. Noordin, M.Y., Venkatesh, V.C. Chan, C.L. and Abdullah, A. (2001). Performance Evaluation of Cemented Carbide Tools in Turning AISI 1010 Steel. Journal of Materials Processing Technology. 116: 16-21.

Total no of citations: More than 142


Conference/Seminar/Colloquium/Articles

1. M. Mohammadzadeh S., M.Y. Noordin and M. Sakhawat Hussain (2011). Machinability

of AISI H13 Tool Steel when Using the EDM Process with Carbon Nanotubes. 1st International Conference on Composites and Nanocomposites (ICNC2011), Kottayam, India, January 7 - 9, 2011, IL 13.

2. M. Thirumurgan, Noordin Mohd Yusof and Muhamad Zameri Mat Saman. (2009) Sustainability Assessment Methodology: a Review and Research Direction, 7th Global Conference on Sustainable Manufacturing, Chennai, India, 2-4 December 2009, pp. 379-384.

3. Noordin M.Y., Effendy, Kurniawan, D. (2008) Tool Wear and Tool Life Performance of TiAlN Coated Carbide Cutting Tools when Turning Hardened Cold Work Tool Steel. Proceedings of International Graduate Conference on Engineering and Science 2008. December 23-24. Johor Bahru: SPS UTM and PGSS UTM, B37 1-7.

4. Noordin M.Y., Kurniawan, D., Sharif, S., Kadir, M.R.A. (2008) Dry Machining of Hardened Stainless Steel Using Coated Carbide Cutting Tool with Wiper Geometry: Determination of Optimum Cutting Parameters Using Empirical Modeling Approach. Proceedings of the 9th Asia Pacific Industrial Engineering & Management Systems Conference. December 3–5. Nusa Dua: APIEMS, 1291– 1298.

5. Ani Idris, Iqbal Ahmed, Noordin, M.Y. (2008). Dissolution of Polyethersulfone Ultrafiltration Membrane using Microwave Technique. IChemE Conference. UK

6. M.A. Kamely, M.Y. Noordin, V.C. Venkatesh, D. Kurniawan (2008). The Effect of Cutting Speed and Coating Materials on Chip Formation when Hard Turning AISI D2 Cold Work Tool Steel (60 HRC). Proceedings of the Conference on Manufacturing and Electronic Technology (COMET 2008). January 26 - 27. SME-UTM S227, 107 - 111.

7. M. Z. Mat Saman, M. Y. Noordin, M. S. Nabi Baksh (2007). UTM’s Experience in Industrial Engineering Education. e-Proceedings of the 2nd Regional Conference on Engineering Education (RCEE 2007). 3-5 December 2007. Johor Bahru: Universiti Teknologi Malaysia, 512-516.

8. M. Y. Noordin, D. Kurniawan, S. Sharif (2007). Evaluation on Machined Surface of Hardened Stainless Steel Generated by Hard Turning Using Coated Carbide Tools with Wiper Geometry. e-Proceedings of the National Metallurgical Conference 2007 (NMC 2007). 26th & 27th Nov. 2007. Johor Bahru: Universiti Teknologi Malaysia, Session A4.

9. Wan Emri Wan Abdul Rahaman, M. Y. Noordin, D. Kurniawan (2007). Tool life and surface roughness of ceramic cutting tool when turning AISI D2 tool steel. e-Proceedings of the National Metallurgical Conference 2007 (NMC 2007). 26th & 27th Nov. 2007. Johor Bahru: Universiti Teknologi Malaysia, Session A4.

10. S. Sharif, Rival, Noordin M.Y. (2007). Surface Defects in PMD-EDM of Titanium Alloy, Ti-6246. e-Proceedings of the National Metallurgical Conference 2007 (NMC 2007). 26th & 27th Nov. 2007. Johor Bahru: Universiti Teknologi Malaysia, Session A5.

11. S. Sharif, Rival and Noordin M.Y. (2007). Effect of using SiC on Surface Integrity of Titanium Alloy, Ti-6246 in PMD-EDM. Manufacturing Engineering, Automation and Robotics Proceedings 3rd World Engineering Congress 2007. 5 – 9 August 2007. Penang.


12. Dwi Agustina Kurniawati and M. Y. Noordin (2006). A Generic Framework for Developing a Quality Management System (QMS) for Small Manufacturing Organizations. Proceedings of Abstracts and Papers (on CD-ROM) of The 7th Asia Pacific Industrial Engineering and Management Systems Conference 2006 (V. Kachitvichyanukul & D. Kritcharnchai, editors). 17-20 December. Bangkok: Asian Institute of Technology, 249 – 260.

13. Kurniawati, D. A and Noordin M. Y. (2006). A Quality Management System Framework for Small Manufacturing Organizations (A Case Study). Proceeding International Conference on Technology and Operations Management. December 1 - 2. Bandung: Aula Barat & SBM-ITB, 161-170.

14. Affandi M. Zainal, M. Y. Noordin, D. Kurniawan, S. Sharif and Y. C. Tang (2006). Advances in Machining Hard-To-Cut Materials : The Use of Coated Carbide and Ceramic Cutting Tools. Proceeding International Conference on Technology and Operations Management. December 1 - 2. Bandung: Aula Barat & SBM-ITB.

15. D.A. Kurniawati, M.Y. Noordin (2006). The Application of the Generic Framework for Developing a Quality Management System (QMS) for Small Manufacturing Organizations (FDQSMO). Proceedings of the 9th International Conference on Quality in Research (9th QiR-2006). September 6-7. Depok: Faculty of Engineering, University of Indonesia, IMM-08.

16. A.S. Mohruni, S. Sharif, M.Y. Noordin, V.C. Venkatesh (2006). Investigation of Optimum Cutting Condition When End Milling Titanium Alloy Ti-6Al-4V. Proceedings of the 9th International Conference on Quality in Research (9th QiR-2006). September 6-7. Depok: Faculty of Engineering, University of Indonesia, IMM-26.

17. M.Y. Noordin, Y.C. Tang, D. Kurniawan (2006). Tool life investigation of PVD TiAlN coated carbide insert when turning hardened tool steel. Proceedings of the International Conference on Manufacturing Science and Technology (ICOMAST-2006). August 28 – 30. Melaka: Faculty of Engineering and Technology, MMU, 51-54.

18. S. Sharif, A.S. Mohruni, M.Y. Noordin, V.C. Venkatesh (2006). Optimum Surface Roughness Prediction Model when End Milling Titanium Alloy (Ti-6Al-4V). Proceedings of the International Conference on Manufacturing Science and Technology (ICOMAST-2006). August 28 – 30. Melaka: Faculty of Engineering and Technology, MMU, 55-58.

19. M.Y. Noordin, Denni Kurniawan, S. Sharif, Tang Yu Cai (2006). On Hard Turning of Martensitic Stainless Steel Using Geometrically Modified Coated Carbide. Proceedings of the International Conference on Manufacturing Science and Technology (ICOMAST-2006). August 28 – 30. Melaka: Faculty of Engineering and Technology, MMU, 90-93.

20. M.A. Kamely, M.Y. Noordin, V.C. Venkatesh (2006). The Effect of Multiple Pass Cutting on Surface Integrity when Hard Turning of AISI D2 Cold Work Tool Steel. Proceedings of the International Conference on Manufacturing Science and Technology (ICOMAST-2006). August 28 – 30. Melaka: Faculty of Engineering and Technology, MMU, 98-101.

21. M.Y. Noordin, Y.C. Tang, D. Kurniawan (2006). RSM Tool Life Modeling for Medium Hard Turning using PVD TiAlN Coated Carbide Inserts, International Conference on Advances in Materials and Processing Technologies (AMPT 2006). July 30-August 3. Las Vegas.


22. M.A. Kamely, M.Y. Noordin, V.C. Venkatesh, D. Kurniawan (2006). An experimental investigation of coated ceramic cutting tools when hard turning cold work tool steel, eProceedings of the 1st Regional Postgraduate Conference on Engineering & Science (RPCES 2006), July 26 – 27. SPS & PPI UTM, 325-329.

23. A.S. Mohruni, S. Sharif, M.Y. Noordin (2006). Cutting Force Predictions Models in End Milling Titanium Alloy Ti-6Al-4V, eProceedings of the 1st Regional Postgraduate Conference on Engineering & Science (RPCES 2006), July 26 – 27. SPS & PPI UTM, 337-342.

24. M.Y. Noordin, D. Kurniawan, S. Sharif, Y.C. Tang (2006). Performance of wiper coated carbide tool when turning hardened stainless steel, eProceedings of the 1st Regional Postgraduate Conference on Engineering & Science (RPCES 2006), July 26 – 27. SPS & PPI UTM, 381-385.

25. S. Sharif, A. S. Mohruni and M. Y. Noordin (2006). Modeling of Tool Life when End Milling on Titanium Alloy (Ti-6AL-4V) using Response Surface Methodology, Proceedings of the 1st International Conference & 7th AUN/SEED-NET Fieldwise Seminar on Manufacturing and Material Processing, March 14-15. Kuala Lumpur, 127 – 132

26. S. Sharif, Rival and M. Y. Noordin (2006). Machinability Modeling in Powder Mixed Dielectric EDM of Titanium Alloy Ti-6246, Proceedings of the 1st International Conference & 7th AUN/SEED-NET Fieldwise Seminar on Manufacturing and Material Processing, March 14-15. Kuala Lumpur, 133 – 138

27. M.Y. Noordin, D. Kurniawan, and S. Sharif. Surface Integrity of Martensitic Stainless Steel Machined by Wiper Coated Carbide Tool, 5th International Materials Technology Conference and Exhibition (IMTCE 2006). July 17 – 20. Kuala Lumpur.

28. M.A. Kamely, M.Y. Noordin, V.C. Venkatesh, D. Kurniawan (2006). Performance of Coated Ceramic Cutting Tools when Machining Hardened Steel, 5th International Materials Technology Conference and Exhibition (IMTCE 2006). July 17 – 20. Kuala Lumpur.

29. Mohd. Zakri Rosley, M.Y. Noordin and Rozlina Mat Sirat (2006). Application of Quality Function Deployment (QFD) for Determining Key Product Characteristics of a Highlight Marker. Proceedings of the Conference on Manufacturing and Electronic Technology (COMET 2006). January 14 - 15. SME-UTM S227, 75 - 79.

30. M.H Azmi and M.Y. Noordin (2006). Development of an Initial Fuzzy Expert System for Machinability Data. Proceedings of the Conference on Manufacturing and Electronic Technology (COMET 2006). January 14 - 15. SME-UTM S227, 81 – 87.

31. M.A. Kamely, M.Y. Noordin and M.J. Junasri (2006). Experimental Investigation of Multilayer Coating Performance on CBN Cutting Tools when Turning of Hardened AISI D2 Cold Work Tool Steel. Proceedings of the Conference on Manufacturing and Electronic Technology (COMET 2006). January 14 - 15. SME-UTM S227, 145 - 150.

32. S. Sharif, Rival and M.Y. Noordin (2005). Electrical Discharge Drilling of Titanium Alloy Ti-6246. Proceedings of the National Conference on Advances in Mechanical Engineering 2005 (NAME’ 05) Vol. 2. May 18 – 20. Kuala Lumpur: Pusat Penerbitan Universiti (UPENA), UiTM, 431 – 438.


33. M.Y. Noordin. (2004). Use of Response Surface Methodology for Modelling and Optimization of Cutting Performance when Turning Hardened Tool Steel using Coated Cermet Tool. Bulletin of the FKM Colloquium. 1(1): 32-36.

34. M.Y. Noordin, V.C. Venkatesh and S. Sharif. (2004). Wear Comparison Studies between Coated Cermet and Coated Carbide Tools when Turning Hardened Stainless Tool Steel. Proceedings of the 3Rd International Conference on Advanced Manufacturing Technology (ICAMT-2004). May 11 - 13. Kuala Lumpur: Research Centre IIUM, 195 - 202.

35. Ani Idris, Faridah Kormin, M.Y. Noordin. (2004). Study on the Composition Effect of Aqueous Phase Solution for the Production of Thin Film Composite Membrane Using Response Surface Methodology. (MSTC 2004).

36. M.Y. Noordin, V.C. Venkatesh, S. Sharif and A. Abdullah. (2003). Turning of Hardened Tool Steel using Coated TiCN based Cermet Tool. Proceedings of the 12th Electron Microscopy Conference. December 15 - 17. AMREC, 357 - 364.

37. Ani Idris and M.Y. Noordin. (2003). Effect of Bore Fluid on Reverse Osmosis Hollow Fiber Membranes. Proceedings of the 12th Electron Microscopy Conference. December 15 - 17. AMREC, 197 - 203.

38. Noordin, M.Y., Venkatesh, V.C., Sharif, S., and Abdullah, A. (2003). Wear of Coated Cermet Tool when Turning Hardened Tool Steel. Proceedings of the 3rd International Conference on Advances in Strategic Technologies (ICAST 2003) Volume I. August 12 - 14. Bangi, Selangor: Faculty of Engineering, UKM, 241 - 246.

39. Noordin, M.Y., Venkatesh, V.C., Sharif, S., and Elting, S. (2003). Performance Modeling when Turning Hardened Tool Steel using Cermet Tool. Proceedings of the 3rd International Conference on Advances in Strategic Technologies (ICAST 2003) Volume I. August 12 - 14. Bangi, Selangor: Faculty of Engineering, UKM, 235 - 240.

40. Venkatesh, V.C., Noordin, M.Y. and Santhira, B. (2003). Performance Evaluation of Whisker Reinforced Oxide Ceramic Cutting Tool during Hard Turning. Proceedings of the 3rd International Conference on Advances in Strategic Technologies (ICAST 2003) Volume I. August 12 - 14. Bangi, Selangor: Faculty of Engineering, UKM, 223 - 228.

41. Noordin, M.Y., Venkatesh, V.C., Sharif, S., D. Sarathy and Abdullah, A. (2002). Cutting Performance of Coated Carbide when Turning AISI 1045 Steel. Manufacturing Engineering, Automation and Robotics Proceedings 2nd World Engineering Congress. July 22 - 25. Serdang, Selangor: Universiti Putra Malaysia Press, 148 - 154.

42. Ani, I., Noordin, M.Y., Ismail, A.F. and Shilton, S.J. (2002). Application of Taguchi Analysis to Hollow Fiber Reverse Osmosis Manufacturing Process, Manufacturing Engineering, Automation and Robotics Proceedings 2nd World Engineering Congress. July 22 - 25. Serdang, Selangor: Universiti Putra Malaysia Press, 252 - 257.

43. Noordin, M.Y., Venkatesh, V.C., Lok, C.W., Sharif, S. and Abdullah, A. (2000). Performance Evaluation of Tool Geometry of a Multi Layer Tungsten Carbide Tool when Turning AISI 1045 Steel. Proceedings of 19th AIMTDR Conference. November. Mumbai: Narosa Publishing House, 299 - 304.

44. Noordin, M.Y., Venkatesh, V.C., Chan, C.L. and Abdullah, A. (2000). Performance Evaluation of Cemented Carbide Tools in Turning AISI 1010 Steel, Proceedings of the 2nd International Conference on Advanced Manufacturing Technology (ICAMT-2000). August 16 - 17. Johor Bahru: Penerbit Universiti Teknologi Malaysia, 215 - 220.


45. Noordin, M.Y., Yee, B.T. and M. Zameri, M.S. (2000). Application of the Taguchi Method in Improving Quality, Proceedings of the 2nd International Conference on Advanced Manufacturing Technology (ICAMT-2000). August 16 - 17. Johor Bahru: Penerbit Universiti Teknologi Malaysia, 351 - 357.

46. Abd. Rahman Abdul Rahim and Noordin Mohd. Yusof. (1997). Quality and its Related Issues, Seminar on Quality. Johor Bahru.

47. Noordin Mohd. Yusof and Abd. Rahman Abdul Rahim (1996). Manufacturing Engineering at Universiti Teknologi Malaysia, Proceedings of the 14th Conference of ASEAN Federation of Engineering Organisation (CAFEO’96). November 25 - 27. Malacca: Institution of Engineers, Malaysia, 479 - 494.

48. Awaluddin M. Shaharoun and Noordin M. Yusof. (1996). Financial Justification of CIM, Computer Integrated Manufacturing Seminar (CIMS 96). September 11 - 12. Johor Bahru.

49. Noordin M. Yusof and C. L. Ngeow. (1995). Application of MRP in a Local Manufacturing Company - A Case Study, Proceedings of the 3rd International Conference on Computer Integrated Manufacturing (ICCIM). July 11 - 14. Singapore.

50. Noordin M. Yusof and L.T. Yew. (1995). OLSPCS Application in Malaysian Based Semiconductor Manufacturing Companies, Proceedings of the 3rd International Conference on Computer Integrated Manufacturing (ICCIM). July 11 - 14. Singapore.

51. Noordin M. Yusof and S. Rajesham. (1995). Flexible Manufacturing System: Concepts and Applications, Seminar on Applications of Advanced Manufacturing Technology (M’TECH 95). July 15. Johor Bahru.

52. Noordin M. Yusof, K.M Loh and S. Rajesham. (1994). A Reverse Engineering Approach to Machine Components and its Appraisal, Proceedings of the International Conference on Advanced Manufacturing Technology (ICAMT ‘94). August 29 - 30. Johor Bahru: Faculty of Mechanical Engineering, 431 - 439.

53. Noordin M. Yusof and Mohd. Shariff Nabi Baksh. (1993). Trends in Modern Manufacture: The UTM Perspective, Seminar on CMM in Advanced Manufacturing and Quality Control, December 9, Shah Alam, Malaysia.

54. Noordin M. Yusof. (1993). The Use of CAD/CAM Systems in Manufacturing, CAD/CAM Seminar for SMI’s, September 16, KL, Malaysia.

55. Noordin M. Yusof and Safian Sharif. (1993). Trends in Modern Manufacture: Role of Faculty of Mechanical Engineering, Workshop on Productivity and Quality for SMI Companies, July 29, NPC, Johor, Malaysia.

56. Noordin M. Yusof. (1993). Trends in Modern Manufacture: Role of Faculty of Mechanical Engineering, Seminar on CMM and CAD/CAM Applications in Reverse Engineering, May 25, Universiti Teknologi Malaysia, Johor, Malaysia.

57. Noordin M. Yusof and Adnan Hassan (1993). Quality and Standardization. Science and Technology Malaysia, Ministry of Science, Technology and Environment and COSTAM, Vol 3 No:2, 25-29, November 1993.

58. Nooh Abu Bakar, S. Rajesham, Noordin Mohd. Yusof and Syed Azman Shah Syed Noordin. (1992). Trends in Modern Manufacture - The Role of Tertiary Technical Education, The 6th Science and Technology Congress, August 7 - 13, KL, Malaysia.


59. Nooh Abu Bakar and Noordin M. Yusof. (1992). Faculty of Mechanical Engineering Administration System, Muzakararah II FKJ, ITM Segamat Branch, Johor, Malaysia.

Book Translated

1. Che Abas Che Ismail, Izman Sudin, Noordin Mohd. Yusof, Safian Sharif and Yahaya

Ramli, Reka Bentuk dan Pembuatan Bersepadu Komputer, Penerbit Universiti Teknologi Malaysia (2000).

Article

1. FMS (1995). Ensiklopedia Sains dan Teknologi.

13. Patent (Group inventor)

1. PI2008 0270 - Microwave Assisted Polymer Dissolution Apparatus for Membrane Production

2. PI 20081128 - Microwave Method of Synthesizing Polyethersulfone/Lithium Halide Membranes using 2 Solvent Systems

14. Editorial/Reviewer/Examiner Experience

Editor of Journal/Conference Proceedings

1. Currently an editorial board member of the International Journal of Precision Technology (IJPTech) published by Inderscience Publishers.

2. Currently an editorial board member of Jurnal Teknologi A published by Penerbit UTM.

3. M. Y. Noordin, T. Y. Liew, C. U. Heng, S. Balakrishnan, T. Jeevananthan, Proceedings of the Conference on Manufacturing and Electronic Technology (COMET 2008). January 26 - 27. SME-UTM S227 (2008).

4. M. Y. Noordin, Roslan Abd. Rahman et al., e-Proceedings of the 2nd Regional Conference on Engineering Education (RCEE 2007). 3-5 December 2007. Johor Bahru: Universiti Teknologi Malaysia (2007).

5. Noordin Mohd. Yusof, Helmi Zakaria, Ong Wee Vern and Quee Tah Chuan, Proceedings of the Conference on Manufacturing and Electronic Technology (COMET 2006). January 14 - 15. SME-UTM S227 (2006).

6. V. C. Venkatesh, Ahmad Faris Ismail, Awaluddin Mohd. Shaharoun, AKM Nurul Amin, Md. Mohafizul Haque, Noordin Mohd. Yusof, Safian Sharif, Shajahan Mridha, Proceedings of the 3rd International Conference on Advanced Manufacturing Technology (ICAMT-2004). May 11 - 13. Research Centre IIUM (2004).

7. M. Y. Noordin and V. C. Venkatesh, Special Issue of the Journal of Materials Processing Technology, Vol. 116, Elsevier Science Publishers (2001).


8. V. C. Venkatesh and M. Y. Noordin, Special Issue of the International Journal for Manufacturing Science & Technology, Volume 2 No. 2, Advanced Manufacturing Solutions Co. Ltd. (2000).

9. V. C. Venkatesh, Noordin Mohd. Yusof, Safian Sharif, Sha’ri Mohd. Yusof and Md. Amirul Khair Salehun, Proceedings of the 2nd International Conference on Advanced Manufacturing Technology (ICAMT - 2000). August 29 - 30, Penerbit Universiti Teknologi Malaysia (2000).

10. Mohd. Ramzan Mainal, Md. Razali Ayob, Noordin Mohd. Yusof, Jamaludin Sheriff, Ali Ourdjini, Che Abas Che Ismail, Suhaimi Mansor and Wan Harun Wan Hamid, Jurnal Mekanikal, Fakulti Kejuruteraan Mekanikal (1995 - 1997).

11. V. C. Venkatesh, Noordin, M. Yusof, S. Rajesham and Safian Sharif, Special Issue of the Journal of Materials Processing Technology, Vol. 44, Elsevier Science Publishers (1994).

12. V. C. Venkatesh, Noordin Mohd. Yusof, S. Rajesham, Izman Sudin, Zainal Abidin Ahmad and Safian Sharif, Proceedings of the International Conference on Advanced Manufacturing Technology (ICAMT ‘94). August 29 - 30, Faculty of Mechanical Engineering (1994).

Evaluation of Paper/Article/Book

1. Quality Characteristics Improvement of Plastic Product by Optimising the Injection

Moulding Parameters Using Taguchi Method (2006). Jurnal Mekanikal, Universiti Teknologi Malaysia.

2. The Novel Bondless Wheel, Spherical Glass Chips and a New Method of Aspheric Generation (2006). Penilai (Pakar Bidang) Kertas Kerja Jurnal Peringkat Antarabangsa bagi Anugerah Penerbitan Universiti 2006.

3. Factors Affecting the Tool Life and Wear Mechanism of CBN Cutting Tool for Turning of Titanium Alloy (2006). Jurnal Kejuruteraan, Universiti Kebangsaan Malaysia

4. Quality Improvements Using Six Sigma Methodology (2006). Conference on Manufacturing and Electronic Technology (COMET 2006).

5. Optimization of Solder Paste Printing Parameters Using Design of Experiments (DOE) (2004). Jurnal Teknologi A, UTM.

6. Improved SPC Chart Pattern Recognition using Statistical Features (2004). Penilai Kertas Kerja Jurnal untuk Pencalonan Anugerah Penerbitan, FKM.

7. Pembuatan Tersepadu Komputer dari Konsep Menjadi Kenyataan (2004). Penilai Anugerah Buku Karya Terjemahan, UTM.

8. The Investigation of Tool Wear and Cutting Power in Turning Gray Cast Iron Using CBN and Ceramic Tools (2004). 3rd International Conference on Advanced Manufacturing Technology (ICAMT-2004).

9. Effect of Tool Corner Radius on Cutting Forces and Chip Geometry in Machining AISI 1045 Steel – FEM Study (2004). 3rd International Conference on Advanced Manufacturing Technology (ICAMT-2004).


10. Investigation of Tool Wear and Surface Roughness in Turning of Metal Matrix Composites (2004). 3rd International Conference on Advanced Manufacturing Technology (ICAMT-2004).

11. A Review of Quality Engineering Implementation in Malaysian Automotive Suppliers (2004). 3rd International Conference on Advanced Manufacturing Technology (ICAMT-2004).

12. A Survey on the Implementation of Quality Engineering Tools in Malaysia Manufacturing Industries (2004). 3rd International Conference on Advanced Manufacturing Technology (ICAMT-2004).

13. Keutuhan Permukaan Bahan Keluli Perkakas Setelah Pengisaran Hujung Menggunakan Perkakas Karbida Bersalut (2003). Jurnal Teknologi A, UTM.

14. Implementation of Computer Based Technologies for the Small and Medium Scale Industries of Malaysia (2003). Pertanika Journal of Science & Technology, UPM.

15. Performance of Carbide Tools in Green Milling of Ti-6242S (2003). Pertanika Journal of Science & Technology, UPM.

16. CAD/CAM of Headform for Helmet Testing (2003). Pertanika Journal of Science & Technology, UPM.

17. End Milling of Aerospace Material using Alloyed Uncoated Carbide under Green Machining (2002). Journal of Industrial Technology, SIRIM Bhd.

18. Mikrometer (1995). Ensiklopedia Sains dan Teknologi.

Evaluation of Courses (National Accredation Board, LAN)

1. Evaluation for the application of minimum standard approval together with course

accreditation certification for the Diploma in Engineering Technology (Mould and Die Manufacturing) course (A 1461) proposed by Universiti Kuala Lumpur (2006).

2. Evaluation of the Diploma in Engineering Technology (Mould and Die Manufacturing) course (KA 5645) proposed by Universiti Kuala Lumpur (2004).

3. Evaluation of the conditions for approval for the running of the Foundation for Engineering and Industrial Technology course (KN 4483) by Kolej Universiti Teknologi Antarabangsa Twintech (International University College of Technology Twintech - IUCTT) (2004).

4. Evaluation of the Foundation for Engineering and Industrial Technology course (KN 4483) proposed by Kolej Universiti Teknologi Antarabangsa Twintech (International University College of Technology Twintech - IUCTT) (2003).

Internal Examiner

1. Norhayati Binti Mohmad Zakwan @ Zakuan. Structural Analysis of Total Quality Management, ISO/TS16949 and Organizational Performance in Malaysian and Thailand Automotive Industry. Ph D. (2009).

2. Elita Amrina. Manufacturing Performance Measurement Tool For Small and Medium-Sized Enterprises. M. Engg. (2009).


3. Siti Norezam Othman. Technology Transfer and Development of Firm Technological Capability among Automotive Component Manufacturers in Malaysia. Engg. D. (2006).

4. Parag Vichare. Partial Ductile Mode Grinding of Aspheric Surfaces on Glass Mould. M. Engg. (2006).

5. Lau Yew Loon. A Comparative Study of Several Production Control Strategies. M. Engg. (1999).

Additionally, have examined numerous M. Eng. - AMT initial and final project presentation as well as M. Eng. and Ph. D. initial project proposal.

External Examiner

1. Ahmad Yasir bin Md Said. Kebolehmesinan Aloi Titanium Ti-6Al-4V Dalam Keadaan Lubrikasi Berkuantiti Minima (MQL). Ph D. Universiti Kebangsaan Malaysia (2010).

2. Siow Ping Chuan. Performance of Coated Carbide Tool in Low Speed Milling of Stainless Steel under Flood and Mist Lubrication. M. Eng. Universiti Malaysia Sabah (2010).

3. Yanuar Burhanuddin. Prestasi Mata Alat Nitrida Boron Polikiub (PCBN) Dalam Proses Pelarikan Aloi Titanium Ti-6Al-4V. Ph D. Universti Kebangsaan Malaysia. (2009).

4. Mariam Binti Abdul Aziz. Development of a Diagnostic Tool to Benchmark Best Manufacturing Practices in Malaysian SMEs. M. Sc. Universiti Putra Malaysia. (2007).

5. Nor Khairusshima Muhamad Khairussaleh. Chatter and Machinability Aspects in End Milling of Metal Matrix Composite (MMC) and Titanium Alloy − Ti − 64l −4V Using Carbide and PCD inserts. M. Sc. International Islamic University Malaysia (2007)

6. Tan Jit Yean. Development of Fuzzy Logic Model for Turning Process of Titanium Alloys. M. Sc. Universiti Putra Malaysia. (2004).

Examiner of Research Project

Internal examiner for evaluating RMK9 eScience proposals (2006, 2007).

Internal examiner for evaluating RMK9 technofund proposals (2006).

Internal examiner for evaluating IRPA RMK9 research project proposals (2006).

Internal examiner for evaluating the progress of IRPA RMK8 research projects (2004, 2005, 2006).

Internal examiner for evaluating FRGS research proposals (2007, 2008).

Internal examiner for evaluating the progress of FRGS research projects (2007, 2008).

15. Professional Development Courses/Modules Conducted

1. Data Gathering and Analysis module, Research Methodology course organized by SPS, UTM (2009).


2. Short Course on Network Analysis in Project Management organized by Society Of Manufacturing Engineers - SME S 227 (2009)

3. Sustainable Manufacturing and Product Design, Talk to FKKKSA Bioprocess Final Year Student (2009)

4. Halatuju Kerjaya Sains dan Teknologi, Talk organized by PPD Ledang/Muar (2008)

5. Techniques of Data Analysis (Basic Statistics), SLAB course (2006, 2007, 2008).

6. Research Design (Engineering) module, Research Methodology course organized by SPS, UTM (2006).

7. Short Course on Statistical Design of Experiments for the Department of Manufacturing and Industrial Engineering, KUiTHHO (2005)

8. Research Design (Engineering) module, Research Methodology course organized by SPS, UTM (2005).

9. Research Design (Engineering) module, Research Methodology course organized by KUITTHO (2004).

10. Quality Management module for Integrated Process Plant Management Scheme organized by CEPP and BATC at Tioxide (M) Sdn. Bhd. (1999).

11. Quality Improvement training program for Philips Electronics Supplies Sdn. Bhd. (1998).

12. Quality Management module for IMDS programme organized by BATC at LIKOM Malaysia (1998).

13. Statistical Process Control module, Training course for supervisors at Kenwood (M) Sdn. Bhd. (1997).

14. Short course on Statistical Quality Control for Hualon Corporation (M) Sdn. Bhd. (1997).

15. CNC Technology short course for Industrial Training Institute trainees (1997).

16. Short course on Project Planning Management & Control for Land and General Bhd. (1996).

17. Short course on Statistical Quality Control for Four Pillars - Beiersdorf Enterprise Sdn. Bhd. (1996).

18. Short course on Quality Improvement Tools for industrial participants (1996).

19. Industrial Engineering module for the Diploma in Manufacturing Management course conducted by Entrepreneurs Development Institute (EDI) in collaboration with Biro Inovasi dan Perundingan (BIP) UTM (1996).

20. CAD/CAM short course for PETERA and trainee from Pakistan (1994).

21. Statistical Process Control short course for UTM administrators (1993).

22. Statistical Process Control module, Short course on the Introduction of Operation Management for Small and Medium Sized Industries (1991).

Module tutor for Quality Management, Project Planning, Management & Control and Applied Statistical Methods modules for IMDS and IGDS programmes of BATC


16. Awards Received

Name of award Year

1. UTM Publication Award, Best Paper in National Journal 2008

2. Scholarship from Kennametal Inc. to attend the Comprehensive Application Engineering Course form July 24-28, 2006 2006

3. Excellence Service Award from Universiti Teknologi Malaysia 2004

4. UTM Publication Award, Best Paper in National Journal 2004

5. Invitation to attend the Asian Academy Seminar on Advanced Manufacturing System held at Hyderabad, India 2000

6. Excellence Service Award from Universiti Teknologi Malaysia 1994

7. Management Awareness Program from the Society of Manufacturing Engineers (USA) 1991

8. BICC - Cranfield Postgraduate Scholarship to pursue a 1 year course leading to the award of a M.Sc. in Advanced Manufacturing Technology at Cranfield Institute of Technology, United Kingdom 1988

9. A 3 year scholarship from Harris Semiconductor Malaysia Sdn. Bhd. whilst undergoing study at Universiti Teknologi Malaysia 1983

17. Community Services

1. Treasurer, Surau Al-Kauthar Management Committee, 2007 - Present

2. Treasurer, Surau Al-Kauthar Ad-hoc Management Committee, 2005 – 2007

3. Member, Surau Al-Kauthar Development Committee, 2003 – 2007

4. Faculty Advisor, Society of Manufacturing Engineers (S227) UTM Student Chapter since its inception in 1993.

5. Assistant Secretary, Academic Staff Association, 2004 – present

6. Member, Sekolah Kebangsaan Taman Perling Parent Teacher Association, 2000 – present

7. Member, Sekolah Menengah Kebangsaan Seri Perling Parent Teacher Association, 2003 – 2004

8. Vice Chairman, Sekolah Menengah Kebangsaan Seri Perling Parent Teacher Association, 2004 – 2005

9. Member, Sekolah Agama Taman Perling 1 Parent Teacher Association, 2004 – present

Additionally, has held various positions in numerous committees at the community level.

curriculum vitae 1. - fkm.utm.mynoordin/s/noordin's cv updated.pdf2 nmycv updated 150508 4....

Documents