curriculum vitae - aesセンターaes.ssr.titech.ac.jp/aziz/cv_aziz.pdf · curriculum vitae ....

__________________________________________________________________________________________

Muhammad Aziz, Dr. Eng. 1 of 26

Curriculum Vitae MUHAMMAD AZIZ, Dr. Eng. Associate Professor Institute of Innovative Research, Tokyo Institute of Technology Ishikawadai-6 Bld. Room 417 (mailbox i6-25)

2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550 Tel. +81-3-5734-3809, Fax +81-3-5734-3559 E-mail [email protected], [email protected] Web aes.ssr.titech.ac.jp/aziz Scopus ID : 56436934500 ORCID : 0000-0003-2433-8500 Researcher ID : B-9248-2015 h-index : 22 (Scopus), 24 (Google Scholars)

RESEARCH AREAS Energy systems Process design Power generation Carbon capture and storage Hydrogen production Renewable Energy

Energy conservation Energy and exergy analysis Exergy recovery Electric vehicle Batteries Smart grid

EDUCATION

1. Department of Electrical Engineering, Faculty of Engineering, Bandung Institute of Technology, 1998-1999

2. International Japanese Course, Osaka University (formerly Osaka University of Foreign Studies) 1999 - 2000

3. Department of Mechanical and Aerospace Engineering, Faculty of Engineering, Kyushu University (bachelor course) 2000 - 2004

4. Graduate School of Engineering, Department of Intelligent Machinery and Systems Engineering, Faculty of Engineering, Kyushu University (master course) 2004 - 2006

5. Graduate School of Engineering, Department of Intelligent Machinery and Systems Engineering, Faculty of Engineering, Kyushu University, (doctor course) 2006 - 2008

PROFESSIONAL EXPERIENCES

1. Associate Professor, Institute of Innovative Research, Tokyo Institute of Technology, Tokyo, Japan, 2016–present

2. Lecturer (part-time), Tokyo University of Agriculture and Technology, Tokyo, Japan, 2016-present

3. Associate Professor, Solutions Research Laboratory, Tokyo Institute of Technology, Tokyo, Japan, 2015–2016

4. Assistant Professor, Solutions Research Laboratory, Tokyo Institute of Technology, Tokyo, Japan, 2011–2015

5. Project Researcher, Institute of Industrial Science, The University of Tokyo, Tokyo, Japan, 2009–2011

6. Planner and Mechanical Designer, Seiko Epson Corp., Nagano, Japan, 2008–2009

__________________________________________________________________________________________


7. Lecturer (part-time), Ritsumeikan Asia Pacific University, Oita, Japan, 2007-2008

8. COE research assistant for Development of Hydrogen as Future Energy, Kyushu University, Fukuoka, Japan, 2006 – 2008

COURSES TAUGHT Energy Systems (Tokyo University of Agriculture and Technology, undergraduate) Power Generation (Tokyo University of Agriculture and Technology, undergraduate) Introduction to information technology (Ritsumeikan Asia Pacific University, undergraduate) VISITING PROGRAMS, SCHOLARSHIPS 1. Visiting World Class Professor, July 23- August 18, 2018, Sebelas Maret University (UNS), Solo, Indonesia. Organized

and funded by Ministry of Research, Technology, and Higher Education, Republic of Indonesia. 2. Visiting World Class Professor, November 1-30, 2017, State University of Malang (Universitas Negeri Malang), Malang,

Indonesia. Organized and funded by Ministry of Research, Technology, and Higher Education, Republic of Indonesia. 3. Visiting World Class Professor, December 17-24, Jakarta and Bandar Lampung (Universitas Lampung). Organized and

funded by Ministry of Research, Technology, and Higher Education, Republic of Indonesia. 4. 21st Century Center of Excellent (COE) program, The Ministry of Education, Science, Sports and Science of Japan, 2006

– 2008 5. Honor Scholarship, The Ministry of Education, Science, Sports and Culture of Japan (doctor course), 2007–2008 6. Honor Scholarship, Fukuoka International Association, 2006 – 2007 7. MEXT (Monbukagakusho) Scholarship, The Ministry of Education, Science, Sports and Culture of Japan (undergraduate

and master courses), 1999 – 2006

AWARDS 1. Best Paper Award, Japan Society of Energy and Resources, June 2018.

Takashi Mitani, Takuya Oda, Muhammad Aziz, Atsuki Uetsuji, Yoko Watanabe, Takao Kashiwagi. Economic analysis for hydrogen application by surplus power. Journal of Japan Society of Energy and Resources, 38, 9-18, 2017 (Nov). (in Japanese)

2. Excellence in Reviewing Award for 2017. Springer. Journal: Clean Technologies and Environmental Policy. 3. Best Poster Award, The 8th International Conference on Applied Energy, October 8-11, 2016, Beijing

Arif Darmawan, Flabianus Hardi, Kunio Yoshikawa, Muhammad Aziz, Koji Tokimatsu. Enhanced process integration of hydrothermal liquefaction, gasification and combined cycle: Modeling and simulation using ASPEN pus. The 8th International Conference on Applied Energy – ICAE 2016, October 8-11, 2016, Beijing, China.

4. The Japan Institute of Energy Award for Encouragement, February 2016. Paper: Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Integrated process for energy harvesting from microalgae: Integration of supercritical water gasification and combined cycle, presented at: 24th Annual Meeting of Japan Institute of Energy, awarding ceremony: February 2016.

5. Marquis Who’s Who in the World 2016, 33rd edition, January 2016 6. Key Scientific Articles, Renewable Energy Global Innovations (ISSN 2291-2460), 2014. Journal: Muhammad Aziz,

Takuya Oda, Takao Kashiwagi. Integration of energy-efficient drying in algae utilization process based on enhanced process integration. Energy 70, 307-316, 2014, DOI: 10.1016/j.energy.2014.03.126.

7. Outstanding Paper Award of 2013, Journal of Chemical Engineering of Japan, Mar. 2014. Journal: Yasuki Kansha, Yui Kotani, Muhammad Aziz, Akira Kishimoto, Atsushi Tsutsumi. Evaluation of a self-heat recuperative thermal process based on thermodynamic irreversibility and exergy. Journal of Chemical Engineering of Japan 46(1), 87-91, 2013.

__________________________________________________________________________________________


8. The Best Paper Award, International Workshop on Clean Technologies of Coal and Biomass Utilization, June 2012 9. APCChE 2012 Young Researcher Award, 14th Asia Pacific Confederation of Chemical Engineering Congress, Feb. 2012 10. Best Presentation Award, 8th International Conference on Progress of Machining Technology, Nov. 2006 JOURNAL EDITORSHIPS

1. Guest Editor, Energies, MDPI (ISSN 1996-1073), IF 2.676

2. Editorial Board, Applied Sciences, MDPI (ISSN 2076-3417), IF 1.689

3. Guest Editor, Sustainability, MDPI (ISSN 2071-1050), Topic: Hydrogen Production and Utilization, 2017-2018.

4. Guest Editor, Applied Sciences, MDPI (ISSN 2076-3417), Topic: Electric Vehicle Charging, 2017-2018.

DISSERTATION Development of Micro Tools and Their Application to Metallic Materials (Kyushu University, March 25, 2008) BOOKS AND BOOK CHAPTERS 1. Muhammad Aziz. Exergy and Its Application - Toward Green Energy Production and Sustainable Environment, InTech,

in press. (Book editor) 2. Muhammad W. Ajiwibowo, Arif Darmawan, Muhammad Aziz. Chemical looping combustion power generation system

for a power-to-gas scheme. Exergy and Its Application - Toward Green Energy Production and Sustainable Environment (Editor: Muhammad Aziz), InTech, in press.

3. Muhammad Aziz. Integrated electric vehicle to small-scale energy management system. Smart Cities, Green Technologies, and Intelligent Transport Systems. Book Series: Communications in Computer and Information Science, Vol. 921 (Editors: Brian Donnellan, Cornel Klein, Markus Helfert, Oleg Gusikhin, António Pascoal), pp. 94-107, Springer, 2019 (Jan). DOI: 10.1007/978-3-030-02907-4_5, ISBN: 978-3-030-02907-4, Print-ISBN: 978-3-030-02906-7.

4. Lukman Adi Prananto, Muhammad Aziz. Integrated gasification systems for power and hydrogen production. Gasification (Editor: Yongseung Yun). Chapter 13, pp. 257-276, InTech, 2018 (Jul). DOI: 10.5772/intechopen.71841, ISBN 978-953-51-5838-7.

5. Arif Darmawan, Dwika Budianto, Koji Tokimatsu, Muhammad Aziz. Analysis of biomass wastes cofiring into existing coal-fired power plant using computational fluid dynamics. Computational Fluid Dynamics - Basic Instruments and Applications in Science (Editor: Adela Ionescu). Chapter 9, pp. 217-236, InTech, 2018 (Feb). DOI: 10.5772/intechopen.68688, ISBN 978-953-51-3791-7, Print ISBN: 978-953-51-3790-0.

6. Muhammad Aziz, Takuya Oda. Advanced battery-assisted quick charger for electric vehicles. Behaviour of Lithium-Ion Batteries in Electric Vehicles. Green Energy and Technology (Editors: Gianfranco Pistoia, Boryann Liaw), Chapter 9, pp. 201-224. Springer, Cham, 2018 (Feb). DOI: 10.1007/978-3-319-69950-9_9, ISBN: 978-3-319-69949-3.

7. Muhammad Aziz, Ilman Nuran Zaini. Hydrogen production from algal pathways. In: Encyclopedia of Sustainability Science and Technology, Second Edition (Editor: Robert A. Meyers), Springer, New York, pp. 1-28, 2017 (Oct). Online ISBN: 978-1-4939-2493-6, Print ISBN: 978-1-4939-2493-6. DOI: 10.1007/978-1-4939-2493-6_958-1.

8. Muhammad Aziz. Advanced charging system for plug-in hybrid electric and electric vehicles. In: Hybrid Electric Vehicles (Editor: Teresa Donateo). InTech, pp. 63-81, 2017, DOI: 10.5772/intechopen.68287, ISBN 978-953-51-5418-1.

9. Muhammad Aziz, Ilman Nuran Zaini. Algae to hydrogen: Novel energy-efficient co-production of hydrogen and power. In: Advances in Hydrogen Production and Storage, Vol. 1: Hydrogen Production Technologies (Editors: Mehmet Sankir, Nurdan Demirci Sankir), Wiley-Scrivener Publishing LLC, pp. 459-486, 2017, DOI: 10.1002/9781119283676.ch12, ISBN: 9781119283645.

__________________________________________________________________________________________


10. Muhammad Aziz, Load levelling utilizing electric vehicles and their used batteries. In: Modeling and Simulation for Electric Vehicle Applications (Editor: Mohamed Amine Fakhfakh), Chapter 6, pp. 125-147, InTech, 2016, DOI: 10.5772/64432, ISBN: 978-953-51-4819-7.

11. Muhammad Aziz. Novel power generation from algae based on combination of exergy recovery and process integration technologies. In: Energy Harvesting: Technology, Methods and Applications (Editor: Renee Williams), Chapter 7, pp. 147-171, Nova Science Publisher, 2015, ISBN 978-1-63483-965-5.

12. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Innovative process energy saving based on enhanced process integration. In: Advances in Engineering Research Vol. 10 (Editor: Victoria M. Petrova), Chapter 3, pp. 77-98, Nova Science Publisher, 2015, ISBN: 978-1-63482-784-3.

13. Bayu Prabowo, Muhammad Aziz, Kentaro Umeki, Mi Yan, Herri Susanto, Kunio Yoshikawa. Utilization of rice husk in the CO2-recycling gasification system for the effective implementation of bioenergy with carbon capture and storage (BECCS) technology, In: Advances in CO2 Capture, Sequestration, and Conversion (Editors: Fangming Jin, Liang-Nian He, Yu Hang Hu), Chapter 13, pp. 323-340, ACS Publication, Washington DC, 2015. Chapter DOI 10.1021/bk-2015-1194.ch013, ISBN13: 9780841230880, eISBN: 9780841230859.

14. Muhammad Aziz. Advanced Utilization of Algae for Power Generation, Scholar’s Press, 2015, Saarbrucken, Germany, ISBN: 978-3-639-76251-8.

15. Muhammad Aziz. Innovative microalgae utilization with enhanced process integration. In: Energy Science and Technology, Eds.: U. C. Sharma, R. Prasad, S. Sivakumar, J.N. Govil, Vol. 7 (Bioenergy), Chapter 31, pp. 674-691, Studium Press LLC, Houston, 2014, ISBN of volume: 1-62699-061-9, ISBN of series: 1-62699-061-1.

16. Muhammad Aziz. Advances in deep and burr-free micro holes machining with newly proposed micro tools. In: Machining: Operations, Technology and Management (Editor: J. Paulo Davim), Chapter 3, pp. 43-68, Nova Science Publishers, New York, 2012, ISBN: 978-162-10-0579-7.

17. Yasuki Kansha, Akira Kishimoto, Muhammad Aziz, Atsushi Tsutsumi. Self-heat recuperation: Theory and applications. In: Heat Exchangers – Basic Design Applications (Editor: Jovan Mitrovic), InTech, Chapter 3, pp. 79-96, 2012, ISBN: 978-953-51-0278-6.

18. Osamu Ohnishi, Hiromichi Onikura, Muhammad Aziz, Toshihiko Eguchi, Toshiro Doi, Syuhei Kurokawa. Improvement of drilling performance of micro compound tool. In: Advances in Precision Engineering (Editors: Jianhong Zhao, Masanori Kunieda, Guilin Yang, Xue-Min Yuan), Trans Tech Publications, pp. 96-100, 2010.09, ISBN-10: 0878492569, ISBN-13: 978-0-87849-256-5.

PATENTS 1. Muhammad Aziz, Yosuke Nakano. Belt drive. Application No. 2009-089253, Patent No. 2010-242789 (Japan) TOP 10 JOURNALS PUBLICATION PERFORMANCE

Journal Name Publisher IF CiteScore Number of published paper

Applied Energy Elsevier 7.900 8.44 10

Energy Conversion and Management Elsevier 6.377 6.85 1

Energy Elsevier 4.968 5.60 3

Renewable Energy Elsevier 4.900 5.38 1

Waste Management Elsevier 4.723 4.94 2

Fuel Processing Technology Elsevier 3.956 4.46 3

International Journal of Hydrogen Energy Elsevier 4.229 4.10 4

Applied Thermal Engineering Elsevier 3.771 4.14 3

__________________________________________________________________________________________


Chemical Engineering Science Elsevier 3.306 3.44 2

Industrial & Engineering Chemistry Research ACS 3.141 3.10 1 All the above journals are included as Q1 according to SJR in each corresponding field. Impact factor (IF) and CiteScore are based on JCR and Scopus on 2017, respectively. PEER-REVIEWED JOURNALS (PUBLISHED AND ACCEPTED) 1. Agung Tri Wijayanta, Sastrorejo Mirmanto, Muhammad Aziz. Heat transfer augmentation of internal flow using twisted

tape insert in turbulent-flow. Heat Transfer Engineering, accepted. 2. Muhammad W. Ajiwibowo, Arif Darmawan, Muhammad Aziz. A conceptual chemical looping combustion power

system design in a power-to-gas energy storage scenario. International Journal of Hydrogen Energy, accepted. DOI: 10.1016/j.ijhydene.2018.11.177 (corresponding author)

3. Muhammad Kunta Biddinika, Mochamad Syamsiro, Srikandi Novianti, Bakhtiyor Nakhshiniev, Muhammad Aziz, Fumitake Takahashi. Dissemination of technology information through YouTube: A case of renewable energy technology. TELKOMNIKA Telecommunication Computing Electronics and Control, 17(3), 2018 (Jun). DOI: 10.12928/telkomnika.v17i3.10124

4. Agung Tri Wijayanta, Pranowo, Mirmanto, Budi Kristiawan, Muhammad Aziz. Internal flow in an enhanced tube having square-cut twisted tape insert. Energies, 12(2), 306, 2019 (Jan). DOI: 10.3390/en12020306

5. Agung Tri Wijayanta, Indri Yaningsih, Muhammad Aziz, Takahiko Miyazaki, Shigeru Koyama. Double-sided delta-wing tape inserts to enhance convective heat transfer and fluid flow characteristics of a double-pipe heat exchanger. Applied Thermal Engineering, 145, 27-37, 2018 (Dec). DOI: 10.1016/j.applthermaleng.2018.09.009.

6. Agung Tri Wijayanta, Muhammad Aziz, Keishi Kariya, Akio Miyara. Numerical study of heat transfer enhancement of internal flow using double-sided delta-winglet tape insert. Energies, 11(11), 3170, 2018 (Nov). DOI: 10.3390/en11113170

7. Bentang Arief Budiman, Fauzan Adziman, Poetro Lebdo Sambegoro, Ignatius Pulung Nurprasetio, Rizky Ilhamsyah, Muhammad Aziz. The role of interfacial rigidity to crack propagation path in fiber reinforced polymer composite. Fibers and Polymers, 19(9), 1980-1988, 2018 (Sep). DOI: 10.1007/s12221-018-8194-z.

8. Chandra Wahyu Purnomo, Endhy Kesuma, Indra Perdana, Muhammad Aziz. Lithium recovery from spent Li-ion batteries using coconut shell activated carbon. Waste Management, 79, 454-461, 2018 (Sep). DOI: 10.1016/j.wasman.2018.08.017.

9. Asep Bayu Dani Nandiyanto, Riezqa Andika, Muhammad Aziz, Lala Septem Riza. Working volume and milling time on the product size/morphology, product yield, and electricity consumption in the ball-milling process of organic material. Indonesian Journal of Science & Technology, 3(2), 1-13, 2018 (Sep). DOI: 10.17509/ijost.v3i2.12752.

10. Farid Triawan, Asep Bayu Dani Nandiyanto, Ade Gafar Abdullah, Muhammad Aziz. Plasma nitriding time on the hardness and crystal structure/phase of SUS403 and SCS6 martensitic stainless steels: an analytical study. Journal of Engineering Science and Technology, 13(8), 2338-2347, 2018 (Aug).

11. Anissa Nurdiawati, Ilman Nuran Zaini, Muhammad Aziz. Efficient hydrogen production from algae and its conversion to methylcyclohexane. Chemical Engineering Transactions, 70, 1507-1512, 2018 (Aug). DOI: 10.3303/CET1870252. (corresponding author)

12. Muhammad Aziz, Firman Bagja Juangsa, Farid Triawan, Asep Bayu Dani Nandiyanto, Ade Gafar Abdullah. Integrated nitrogen production and conversion of hydrogen to ammonia. Chemical Engineering Transactions, 70, 571-576, 2018 (Aug). DOI: 10.3303/CET1870096. (corresponding author)

13. Arif Darmawan, Muhammad W Ajiwibowo, Baskoro Lokahita, Koji Tokimatsu, Muhammad Aziz. Cogeneration system of power and H2 from black liquor through gasification and syngas chemical looping. Chemical Engineering Transactions, 70, 703-708, 2018 (Aug). DOI: 10.3303/CET1870118

__________________________________________________________________________________________


14. Arif Darmawan, Muhammad Kunta Biddinika, Muhammad Huda, Koji Tokimatsu, Muhammad Aziz. Toward sustainable agricultural: integrated system of rice processing and electricity generation. Chemical Engineering Transactions, 70, 1669-1674, 2018 (Aug). DOI: 10.3303/CET1870279.

15. Firman Bagja Juangsa, Lukman Adi Prananto, Takuya Oda, Muhammad Aziz. Highly energy-efficient combination of dehydrogenation of methylcyclohexane and hydrogen-based power generation. Chemical Engineering Transactions, 70, 2089-2094, 2018 (Aug). DOI: 10.3303/CET1870349. (corresponding author)

16. Arif Darmawan, Dwika Budianto, Muhammad W Ajiwibowo, Muhammad Aziz, Koji Tokimatsu. Coal cofiring with hydrothermally-treated empty fruit bunch using computational fluid dynamics. Chemical Engineering Transactions, 70, 2101-2106, 2018 (Aug). DOI: 10.3303/CET1870351.

17. Ignatius Pulung Nurprasetio, Bentang Arief Budiman, Muhammad Aziz. Evaluation of bonding strength and fracture criterion for aluminum alloy – woven composite adhesive joint based on cohesive zone model. International Journal of Adhesion and Adhesives, 85, 193-201, 2018 (Oct). DOI: 10.1016/j.ijadhadh.2018.06.011.

18. Muhammad Aziz, Muhammad Huda, Asep Bayu Dani Nandiyanto, Ade Gafar Abdullah. Opportunity of frequency regulation using electric vehicles in Denmark. Journal of Engineering Science and Technology, 13(6), 1700-1712, 2018 (Jun). (corresponding author)

19. Dina Maulina, Mohamad Amin, Sri Rahayu Lestari, Muhammad Aziz. Alanine as natural biopesticide from Mirabilis jalapa and its interaction with glutamate as an inhibitor in insects immune system. Journal of Biological Researches, 23 (2), 77-83, 2018 (Jun). DOI: 10.23869/bphjbr.23.2.20185.

20. Budi Kristiawan, Budi Santoso, Agung Tri Wijayanta, Muhammad Aziz, Takahiko Miyazaki. Heat transfer enhancement of TiO2/water nanofluid at laminar and turbulent flows: A numerical approach for evaluating effect of nanoparticle loadings. Energies, 11(6), 1584, 2018 (Jun). DOI: 10.3390/en11061584.

21. Firman Bagja Juangsa, Lukman Adi Prananto, Zahrul Mufrodi, Arief Budiman, Takuya Oda, Muhammad Aziz. Highly energy-efficient combination of dehydrogenation of methylcyclohexane and hydrogen-based power generation. Applied Energy, 226, 31-38, 2018 (Sep). DOI: 10.1016/j.apenergy.2018.05.110. (corresponding author)

22. Asep Bayu Dani Nandiyanto, Fajar Nugraha Asyahidda, Ari Arifin Danuwijaya, Ade Gafar Abdullah, Nia Amelia, Muhammad Nur Hudha, Muhammad Aziz. Teaching “nanotechnology” for elementary students with deaf and hard of hearing. Journal of Engineering Science and Technology, 13(5), 1352-1363, 2018 (May).

23. Faizal Arifurrahman, Bentang Arief Budiman, Muhammad Aziz. On the lightweight structural design for electric road and railway vehicles using fiber reinforced polymer composites – a review. International Journal of Sustainable Transportation Technology, 1(1), 21-29, 2018 (Apr). DOI: 10.31427/IJSTT.2018.1.1.4.

24. Diana Hernawati, Mohamad Amin, Mimien Henie Irawati, Sri Endah Indriwati, Muhammad Aziz. Integration of project activity to enhance the scientific process skill and self-efficacy in zoology of vertebrate teaching and learning. EURASIA Journal of Mathematics, Science and Technology Education, 14(6), 2475-2485, 2018 (Jun). DOI: 10.29333/ejmste/89940.

25. Arif Darmawan, Anggoro Cahyo Fitrianto, Muhammad Aziz, Koji Tokimatsu. Integrated system of rice production and electricity generation. Applied Energy, 220, 672-680, 2018 (Jun). DOI: 10.1016/j.apenergy.2018.03.098. (corresponding author)

26. Arif Darmawan, Muhammad W. Ajiwibowo, Kunio Yoshikawa, Muhammad Aziz, Koji Tokimatsu. Energy-efficient recovery of black liquor through gasification and syngas chemical looping. Applied Energy, 219, 290–298, 2018 (Jun). DOI: 10.1016/j.apenergy.2018.03.033. (corresponding author)

27. Lukman Adi Prananto, Ilman Nuran Zaini, Bobby Irawan Mahendranata, Firman Bagja Juangsa, Muhammad Aziz, Tubagus Ahmad Fauzi Soelaiman. Use of the Kalina cycle as a bottoming cycle in a geothermal power plant: Case study of the Wayang Windu geothermal power plant. Applied Thermal Engineering, 132, 686-696, 2018 (Mar). DOI: 10.1016/j.applthermaleng.2018.01.003. (corresponding author)

28. Lukman Adi Prananto, Firman Bagja Juangsa, Riza Mochamad Iqbal, Muhammad Aziz, Tubagus Ahmad Fauzi Soelaiman. Dry steam cycle application for excess steam utilization: Kamojang geothermal power plant case study. Renewable Energy, 117, 157-165, 2018 (Mar). DOI: 10.1016/j.renene.2017.10.029. (corresponding author)

__________________________________________________________________________________________


29. Sunarno, Rochmadi, Panut Mulyono, Muhammad Aziz, Arief Budiman. Kinetic study of catalytic cracking of bio-oil over silica-alumina catalyst. BioResources, 13(1), 1917-1929, 2018 (Jan).

30. Noviany, Arief Nurhidayat, Sutopo Hadi, Tati Suhartati, Muhammad Aziz, Neny Purwitasari, Iman Subasman. Sesbagrandiflorain A and B: Isolation of two new 2-arylbenzofurans from the stem bark of Sesbania grandiflora. Natural Product Research, 32(21), 2558-2564, 2018 (Jan). DOI: 10.1080/14786419.2018.1425858.

31. Takuya Oda, Muhammad Aziz, Takashi Mitani, Yoko Watanabe, Takao Kashiwagi. Mitigation of congestion related to quick charging of electric vehicles based on waiting time and cost–benefit analyses: A japanese case study. Sustainable Cities and Society, 36, 99-106, 2018 (Jan). DOI: 10.1016/j.scs.2017.10.024. (corresponding author)

32. Bentang Arief Budiman, Firman Bagja Juangsa, Muhammad Aziz, Ignatius Pulung Nurprasetio, Ilman Nuran Zaini. Experimental verification of interfacial strength effect on the mechanical properties of carbon fiber-epoxy composite. International Journal on Advanced Science, Engineering and Information Technology, 7(6), 2226-2231, 2017 (Dec). DOI: 10.18517/ijaseit.7.6.2781.

33. Firman Bagja Juangsa, Bentang Arief Budiman, Muhammad Aziz, Tubagus Ahmad Fauzi Soelaiman. Design of an airborne vertical axis wind turbine for low electrical power demands. International Journal of Energy and Environmental Engineering, 8, 293-301, 2017 (Dec). DOI: 10.1007/s40095-017-0247-3.

34. Ilman Nuran Zaini, Annisa Nurdiawati, Muhammad Aziz. Cogeneration of power and H2 by steam gasification and syngas chemical looping. Applied Energy, 207, 134-145, 2017 (Dec). DOI: 10.1016/j.apenergy.2017.06.071.

35. Baskoro Lokahita, Muhammad Aziz, Fumitake Takahashi, Kunio Yoshikawa. Energy and resource recovery from Tetra Pak waste using hydrothermal treatment. Applied Energy, 207, 107-113, 2017 (Dec). DOI: 10.1016/j.apenergy.2017.05.141.

36. Takuya Oda, Takafumi Maekawa, Yoko Watanabe, Muhammad Aziz, Takao Kashiwagi. Influence of congestion at quick charging stations on charging electricity of electric vehicles. Journal of Japan Society of Energy and Resources, 38, 19-27, 2017 (Nov). (in Japanese)

37. Takashi Mitani, Takuya Oda, Muhammad Aziz, Atsuki Uetsuji, Yoko Watanabe, Takao Kashiwagi. Economic analysis for hydrogen application by surplus power. Journal of Japan Society of Energy and Resources, 38, 9-18, 2017 (Nov). (in Japanese)

38. Muhammad Aziz, Aditya Putranto, Muhammad Kunta Biddinika, Agung Tri Wijayanta. Energy-saving combination of N2 production, NH3 synthesis and power generation. International Journal of Hydrogen Energy, 42, 27174-27183, 2017 (Nov). DOI: 10.1016/j.ijhydene.2017.09.079. (corresponding author)

39. Arif Darmawan, Flabianus Hardi, Kunio Yoshikawa, Muhammad Aziz, Koji Tokimatsu. Enhanced process integration of black liquor evaporation, gasification and combined cycle. Applied Energy, 204, 1035-1042, 2017 (Oct). DOI: 10.1016/j.apenergy.2017.05.058.

40. Arif Darmawan, Dwika Budianto, Muhammad Aziz, Koji Tokimatsu. Retrofitting existing coal power plants through cofiring with hydrothermally-treated empty fruit bunch and a novel integrated system. Applied Energy, 204, 1138-1147, 2017 (Oct). DOI: 10.1016/j.apenergy.2017.03.122.

41. Muhammad Aziz, Takuya Oda, Atsushi Morihara, Takao Kashiwagi. Production of ammonia from low rank coal employing chemical looping and Haber-Bosch process. Chemical Engineering Transactions, 61, 79-84, 2017 (Oct). DOI: 10.3303/CET1761011. (corresponding author)

42. Gea Fardias Mumin, Pandji Prawisudha, Ilman Nuran Zaini, Muhammad Aziz, Ari Darmawan Pasek. Municipal solid waste processing and separation employing wet torrefaction for alternative fuel production and aluminum reclaim. Waste Management, 67, 106-120, 2017 (Sep). DOI: 10.1016/j.wasman.2017.05.022.

43. Ilman Nuran Zaini, Srikandi Novianti, Anissa Nurdiawati, Adrian Rizqi Irhamna, Muhammad Aziz, Kunio Yoshikawa. Investigation on the physical characteristics of washed hydrochar pellets made from empty fruit bunch. Fuel Processing Technology, 160, 109-120, 2017 (Jun). DOI: 10.1016/j.fuproc.2017.02.020.

44. Takashi Mitani, Muhammad Aziz, Takuya Oda, Atsuki Uetsuji, Yoko Watanabe, Takao Kashiwagi. Annual assessment of large-scale introduction of renewable energy: Modeling of unit commitment schedule for thermal power generators and pumped storages. Energies, 10(6), 738, 2017 (Jun). DOI: 10.3390/en10060738. (corresponding author)

__________________________________________________________________________________________


45. Muhammad Aziz, Tedi Kurniawan, Takuya Oda, Takao Kashiwagi. Advanced power generation utilizing biomass wastes from palm oil mills. Applied Thermal Engineering, 114, 1378-1386, 2017 (Mar). DOI: 10.1016/j.applthermaleng.2016.11.031. (corresponding author)

46. Muhammad Aziz, Ilman Nuran Zaini, Takuya Oda, Atsushi Morihara, Takao Kashiwagi. Energy conservative brown coal conversion to hydrogen and power based on enhanced process integration: Integrated drying, coal direct chemical looping, combined cycle and hydrogenation. International Journal of Hydrogen Energy, 42, 2904-2913, 2017 (Feb). DOI: 10.1016/j.ijhydene.2016.10.060. (corresponding author)

47. Takuya Oda, Muhammad Aziz, Takashi Mitani, Yoko Watanabe, Takao Kashiwagi. Actual congestion and effect of charger addition in the quick charger station: Case study based on the records of expressway. Electrical Engineering in Japan, 198, 11-18, 2017 (Jan). DOI: 10.1002/eej.22906.

48. Muhammad Aziz, Firman Bagja Juangsa, Winarto Kurniawan, Bentang Arief Budiman. Clean co-production of H2 and power from low rank coal. Energy, 116, 489-497, 2016 (Dec). DOI: 10.1016/j.energy.2016.09.135. (corresponding author)

49. Takuya Oda, Muhammad Aziz, Takashi Mitani, Yoko Watanabe, Takao Kashiwagi. Number of quick charge station and quick charger for electric vehicle – Case study considering the traffic density of the road type –. Journal of Japan Society of Energy and Resources, 37, 7-12, 2016 (Nov). (in Japanese).

50. Muhammad Aziz, Tedi Kurniawan. Enhanced utilization of palm oil mill wastes for power generation. Chemical Engineering Transactions, 52, pp. 727-732, 2016 (Oct). DOI: 10.3303/CET1652122. (corresponding author)

51. Muhammad Aziz, Takuya Oda, Atsushi Morihara. Energy efficient co-production of hydrogen and power from brown coal employing direct chemical looping. Chemical Engineering Transactions, 52, 721-726, 2016 (Oct). DOI: 10.3303/CET1652121. (corresponding author)

52. Dwika Budianto, Muhammad Aziz, Cahyadi, Takuya Oda. Numerical investigation of co-firing of palm kernel shell into pulverized coal combustion. Journal of the Japan Institute of Energy, 95(8), 605-614, 2016 (Aug). DOI: 10.3775/jie.95.605. (corresponding author)

53. Bentang Arief Budiman, Djoko Suharto, Indra Djodikusumo, Muhammad Aziz, Firman Bagja Juangsa. Fail-safe design and analysis for guide vane of hydro turbine. Advances in Mechanical Engineering, 8(7), 1-8, 2016 (Jul). DOI: 10.1177/1687814016658178.

54. Muhammad Aziz. Power generation from algae employing enhanced process integration technology. Chemical Engineering Research and Design, 109, 297-306, 2016 (May). DOI: 10.1016/j.cherd.2016.02.002. (corresponding author)

55. Muhammad Aziz, Takuya Oda, Masakazu Ito. Battery assisted charging system for simultaneous charging of electric vehicles. Energy, 100, 82-90, 2016 (Apr). DOI: 10.1016/j.energy.2016.01.069. (corresponding author)

56. Muhammad Aziz, Dwika Budianto, Takuya Oda. Computational fluid dynamic analysis of co-firing of palm kernel shell and coal. Energies, 9(3), 137(pp. 1-15), 2016 (Mar). DOI: 10.3390/en9030137. (corresponding author)

57. Takashi Mitani, Takuya Oda, Muhammad Aziz, Takao Kashiwagi. A study on estimation method for customer’s reaction towards other photovoltaic installations. Journal of Japan Society of Energy and Resources, 37(2), 9-16, 2016 (Feb). (in Japanese).

58. Takuya Oda, Muhammad Aziz, Takashi Mitani, Takao Kashiwagi. Actual congestion and effect of charger addition in the quick charger station —Case study based on the records of expressway—. IEEJ Transactions on Power and Energy, 136(2), 198-204, 2016 (Feb). DOI: 10.1541/ieejpes.136.198 (in Japanese).

59. Muhammad Aziz. Integrated hydrogen production and power generation from microalgae. International Journal of Hydrogen Energy, 41(1), 104-112, 2016 (Jan). DOI: 10.1016/j.ijhydene.2015.10.115. (corresponding author)

60. Bayu Prabowo, Muhammad Aziz, Kentaro Umeki, Herri Susanto, Mi Yan, Kunio Yoshikawa. CO2-recycling biomass gasification system for highly efficient and carbon-negative power generation. Applied Energy 158, 97-106, 2015 (Nov). DOI: 10.1016/j.apenergy.2015.08.060.

__________________________________________________________________________________________


61. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Clean hydrogen production from low rank coal: Novel integration of drying, gasification, chemical looping, and hydrogenation. Chemical Engineering Transactions 45, 613-618, 2015 (Oct). DOI: 10.3303/CET1545103. (corresponding author)

62. Muhammad Aziz, Takuya Oda, Takashi Mitani, Yoko Watanabe, Takao Kashiwagi. Utilization of electric vehicles and their used batteries for peak-load shifting. Energies 8(5), 3720-3738, 2015 (May). DOI: 10.3390/en8053720. (corresponding author)

63. Muhammad Aziz, Oda Takuya, Kashiwagi Takao. Innovative steam drying of empty fruit bunch with high energy efficiency. Drying Technology 33(4), 395-405, 2015 (Apr). DOI: 10.1080/07373937.2014.970257. (corresponding author)

64. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Design and analysis of energy-efficient integrated crude palm oil and palm kernel oil processes. Journal of the Japan Institute of Energy 94(1), 143-150, 2015 (Jan). DOI: 10.3775/jie.94.143. (corresponding author)

65. Muhammad Aziz. Integrated supercritical water gasification and a combined cycle for microalgal utilization. Energy Conversion and Management 91, 140-148, 2015, DOI: 10.1016/j.enconman.2014.12.012. (corresponding author)

66. Muhammad Aziz, Pandji Prawisudha, Bayu Prabowo, Bentang Arief Budiman. Integration of energy-efficient empty fruit bunch drying with gasification/combined cycle systems. Applied Energy 139, 188-195, 2015, DOI: 10.1016/j.apenergy.2014.11.038. (corresponding author)

67. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Advanced energy harvesting from algae—Innovative integration of drying, gasification and combined cycle. Energies 7(12), 8217-8235, 2014, DOI: 10.3390/en7128217. (corresponding author)

68. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Energy-efficient low rank coal drying based on enhanced vapor recompression technology. Drying Technology 32, 1621-1631, 2014, DOI: 10.1080/07373937.2014.915219. (corresponding author)

69. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Integration of energy-efficient drying in microalgae utilization based on enhanced process integration. Energy 70, 307-316, 2014, DOI: 10.1016/j.energy.2014.03.126 (featured as Key Scientific Articles from Renewable Energy Global Innovations) (corresponding author)

70. Yuping Liu, Muhammad Aziz, Yasuki Kansha, Atsushi Tsutsumi. Application of the self-heat recuperation technology for energy saving in biomass drying system. Fuel Processing Technology 117, 66-74, 2014, DOI: 10.1016/j.fuproc.2013.02.007.

71. Yui Kotani, Muhammad Aziz, Yasuki Kansha, Chihiro Fushimi, Atsushi Tsutsumi. Magnetocaloric heat circulator based on self-heat recuperation technology. Chemical Engineering Science 101, 5-12, 2013, DOI: 10.1016/j.ces.2013.05.064.

72. Yuping Liu, Muhammad Aziz, Yasuki Kansha, Atsushi Tsutsumi. A novel exergy recuperative drying module and its application for energy-saving drying with superheated steam. Chemical Engineering Science 100, 392-401, 2013, DOI: 10.1016/j.ces.2013.01.044.

73. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Enhanced high energy efficient steam drying of algae. Applied Energy 109, 163–170, 2013, DOI: 10.1016/j.apenergy.2013.04.004. (corresponding author)

74. Yuping Liu, Muhammad Aziz, Yasuki Kansha, Atsushi Tsutsumi. Drying energy saving by applying self-heat recuperation technology to biomass drying system. Chemical Engineering Transactions 29, 577-582, 2012, DOI: 10.3303/CET1229097.

75. Yasuki Kansha, Muhammad Aziz, Akira Kishimoto, Atsushi Tsutsumi. Evaluation of a self-heat recuperative thermal process based on thermodynamic irreversibility and exergy. Journal of Chemical Engineering of Japan 46(1), 87-91, 2013, DOI: 10.1252/jcej.12we084.

76. Yuping Liu, Muhammad Aziz, Chihiro Fushimi, Yasuki Kansha, Kazuhiro Mochidzuki, Shozo Kaneko, Atsushi Tsutsumi, Katsuhiko Yokohama, Kazuyuki Myoyo, Koji Oura, Keisuke Matsuo, Shogo Sawa, Katsuhiko Shinoda. Exergy analysis of biomass drying based on self-heat recuperation technology and its application for industry: a simulation and experimental study. Industrial & Engineering Chemistry Research 51, 9997−10007, 2012, DOI: 10.1021/ie2027298.

__________________________________________________________________________________________


77. Muhammad Aziz, Yasuki Kansha, Akira Kishimoto, Yui Kotani, Yuping Liu, Atsushi Tsutsumi. Advanced energy saving in low rank coal drying based on self-heat recuperation technology. Fuel Processing Technology 104, 16-22, 2012, DOI: 10.1016/j.fuproc.2012.06.020.

78. Muhammad Aziz, Osamu Ohnishi, Hiromichi Onikura. Advanced burr-free hole machining using newly developed micro compound tool. International Journal of Precision Engineering and Manufacturing 13(6), 947-953, 2012, DOI: 10.1007/s12541-012-0123-2. (corresponding author)

79. Muhammad Aziz, Osamu Ohnishi, Hiromichi Onikura. Innovative micro hole machining with minimum burr formation by the use of newly developed micro compound tool. Journal of Manufacturing Process 14, 224-232, 2012, DOI: 10.1016/j.jmapro.2011.12.006. (corresponding author)

80. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Application of high energy efficient heat circulation technology in low rank coal drying. Jurnal Ilmiah Teknologi Energi (ISSN: 1858-3466), 1(13), 34-43, 2011. (corresponding author)

81. Chihiro Fushimi, Yasuki Kansha, Muhammad Aziz, Yuping Liu, Kazuhiro Mochidzuki, Shozo Kaneko, Atsushi Tsutsumi. Energy-efficient biomass drying based on self-heat recuperation technology. Separation Technology 41(4), 29-34, 2011 (in Japanese).

82. Muhammad Aziz, Osamu Ohnishi, Hiromichi Onikura. Novel micro deep drilling using micro long flat drill with ultrasonic vibration. Precision Engineering 36(1), 168-174, 2012, DOI: 10.1016/j.precisioneng.2011.07.010. (corresponding author)

83. Muhammad Aziz, Yasuki Kansha, Atsushi Tsutsumi. Self-heat recuperative fluidized bed drying of brown coal. Chemical Engineering and Processing: Process Intensification 50(9), 944-951, 2011, DOI: 10.1016/j.cep.2011.07.005.

84. Muhammad Aziz, Chihiro Fushimi, Yasuki Kansha, Kazuhiro Mochidzuki, Shozo Kaneko, Atsushi Tsutsumi, Keigo Matsumoto, Katsuhiko Yokohama, Kenichiro Kosaka, Noboru Kawamoto, Koji Oura, Yoshiki Yamaguchi, Masaaki Kinoshita. Innovative energy efficient biomass drying based on self-heat recuperation technology. Chemical Engineering & Technology 34(7), 1095-1103, 2011, DOI: 10.1002/ceat.201100065.

85. Chihiro Fushimi, Yasuki Kansha, Muhammad Aziz, Kazuhiro Mochidzuki, Shozo Kaneko, Atsushi Tsutsumi, Keigo Matsumoto, Katsuhiko Yokohama, Kenichiro Kosaka, Noboru Kawamoto, Koji Oura, Yoshiki Yamaguchi, Masaaki Kinoshita. Novel drying process based on self-heat recuperation technology. Drying Technology 29, 105-110, 2010, DOI: 10.1080/07373937.2010.482719.

86. Osamu Ohnishi, Hiromichi Onikura, Toshihiko Eguchi, Muhammad Aziz, Toshiro Doi, Syuhei Kurokawa. Improvement in drilling performance of micro compound tool. Key Engineering Materials 447-448, 96-100, 2010, DOI: 10.4028/www.scientific.net/KEM.447-448.96.

87. Osamu Ohnishi, Hiromichi Onikura, Seung-Ki Min, Muhammad Aziz, Sho Tsuruoka. Effect of ultrasonic vibration on micro grooving. Memoirs of the Faculty of Engineering, Kyushu University, 68(1), 1-9, 2008.

88. Osamu Ohnishi, Hiromichi Onikura, Seung-Ki Min, Muhammad Aziz, Sho Tsuruoka. Characteristics of grooving by micro end mills with various tool shapes and approach to their optimal shape. Memoirs of the Faculty of Engineering, Kyushu University 67(4), 143-151, 2007.

PEER-REVIEWED INTERNATIONAL CONFERENCES (PROCEEDINGS) 1. Muhammad Huda, Muhammad Aziz, Koji Tokimatsu. Techno-economic study of vehicle to grid (V2G) implementation

in Java Bali power system, Indonesia. The International Conference on Innovative Applied Energy (IAPE’19), Mar 14-15, 2018, Oxford, UK.

2. Arif Darmawan, Koji Tokimatsu, Muhammad Aziz. Co-production of hydrogen and power from black liquor via supercritical water gasification, chemical looping and power generation. The International Conference on Innovative Applied Energy (IAPE’19), Mar 14-15, 2018, Oxford, UK.

3. Muhammad Aziz. Efficiently-integrated algal gasification, nitrogen production, ammonia synthesis, and power generation. 2nd International Conference on Energy and Power (ICEP2018), Dec 13-15, 2018, Sydney, Australia.

4. Muhammad Aziz, Muhammad Huda. Application opportunity of vehicles-to-grid in Indonesian electrical grid. 2nd International Conference on Energy and Power (ICEP2018), Dec 13-15, 2018, Sydney, Australia.

__________________________________________________________________________________________


5. Muhammad Aziz, Bentang Arief Budiman, Erwin Sutanto, Poetro Sambegoro. Implementation of electric vehicle and grid integration. 5th International Conference on Electric Vehicular Technology (ICEVT 2018), Oct 30-31. 2018, Solo, Indonesia. (keynote)

6. Ignatius Pulung Nurprasetio, Bentang Arief Budiman, Muhammad Aziz, Ahmad Alfin Afwan. Development of static and dynamic online measurement system for ground vehicles. 5th International Conference on Electric Vehicular Technology (ICEVT 2018), Oct 30-31. 2018, Solo, Indonesia.

7. Poetro Sambegoro, Bentang Arief Budiman, Muhammad Aziz. Dimensional and parametric studies on thermal behavior of Li-ion batteries. 5th International Conference on Electric Vehicular Technology (ICEVT 2018), Oct 30-31. 2018, Solo, Indonesia.

8. Muhammad Aziz. Advanced green technologies toward future sustainable energy systems. Science and Technology Research Symposium (SiRes), Oct 22-23, 2018, Bandung, Indonesia. (keynote)

9. Arif Darmawan, Dwika Budianto, Muhammad W. Ajiwibowo, Muhammad Aziz, Koji Tokimatsu. Coal cofiring with hydrothermally-treated empty fruit bunch using computational fluid dynamics. 21st Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES’18), August 25-29, 2018, Prague, Czech.

10. Arif Darmawan, Muhammad K. Biddinika, Muhammad Huda, Muhammad Aziz, Koji Tokimatsu. Toward sustainable agricultural: integrated system of rice processing and electricity generation. 21st Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES’18), August 25-29, 2018, Prague, Czech.

11. Arif Darmawan, Muhammad W Ajiwibowo, Baskoro Lokahita, Muhammad Aziz, Koji Tokimatsu. Cogeneration system of power and H2 from black liquor through gasification and syngas chemical looping. 21st Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES’18), August 25-29, 2018, Prague, Czech.

12. Anissa Nurdiawati, Ilman N Zaini, Muhammad Aziz. Efficient hydrogen production from algae and its conversion to methylcyclohexane. 21st Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES’18), August 25-29, 2018, Prague, Czech.

13. Firman B. Juangsa, Lukman A. Prananto, Takuya Oda, Muhammad Aziz. Highly energy-efficient combination of dehydrogenation of methylcyclohexane and hydrogen-based power generation. 21st Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES’18), August 25-29, 2018, Prague, Czech.

14. Muhammad Aziz, Firman B. Juangsa, Farid Triawan, Asep B.D. Nandiyanto, Ade G. Abdullah. Integrated nitrogen production and conversion of hydrogen to ammonia. 21st Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES’18), August 25-29, 2018, Prague, Czech.

15. Baskoro Lokahita, Ganjar Samudro, Haryono Setiyo Huboyo, Muhammad Aziz, Fumitake Takahashi. Energy recovery potential from excavating municipal solid waste dumpsite in Indonesia. 10th International Conference on Applied Energy (ICAE2018), Aug 22-25, 2018, Hong Kong, China.

16. Arif Darmawan, Muhammad W Ajiwibowo, Muhammad Aziz, Koji Tokimatsu. Efficient black liquor conversion to power and H2 by adopting negative emission technology. 10th International Conference on Applied Energy (ICAE2018), Aug 22-25, 2018, Hong Kong, China.

17. Muhammad Huda, Muhammad Aziz, Koji Tokimatsu. The future of electric vehicles to grid integration in Indonesia. 10th International Conference on Applied Energy (ICAE2018), Aug 22-25, 2018, Hong Kong, China.

18. Baskoro Lokahita, Winarto Kurniawan, Muhammad Aziz, Fumitake Takahashi. Py-GC-MS of refuse materials in waste to energy point of view. 10th International Conference on Applied Energy (ICAE2018), Aug 22-25, 2018, Hong Kong, China.

19. Arif Darmawan, Muhammad W Ajiwibowo, Anggoro Cahyo F, Muhammad Aziz, Koji Tokimatsu. Co-production of hydrogen and power from palm mill wastes. 10th International Conference on Applied Energy (ICAE2018), Aug 22-25, 2018, Hong Kong, China.

20. Muhammad W Ajiwibowo, Arif Darmawan, Muhammad Huda, Adi Surjosatyo, Muhammad Aziz. Integrated power-to-gas and power generation system through chemical looping combustion: a conceptual design. 10th International Conference on Applied Energy (ICAE2018), Aug 22-25, 2018, Hong Kong, China.

__________________________________________________________________________________________


21. Anissa Nurdiawati, Ilman Nuran Zaini, Muhammad Aziz. Dual-stage chemical looping of microalgae for methanol production with negative-carbon emission. 10th International Conference on Applied Energy (ICAE2018), Aug 22-25, 2018, Hong Kong, China.

22. Muhammad Aziz, Muhammad Huda. Utilization of electric vehicles for frequency regulation in Danish electrical grid. 10th International Conference on Applied Energy (ICAE2018), Aug 22-25, 2018, Hong Kong, China.

23. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Comparison of liquid hydrogen, methylcyclohexane and ammonia on energy efficiency and economy. 10th International Conference on Applied Energy (ICAE2018), Aug 22-25, 2018, Hong Kong, China.

24. Muhammad W Ajiwibowo, Arif Darmawan, Muhammad Aziz. Co-production of hydrogen and power from black liquor via supercritical water gasification, chemical looping and power generation. 10th International Conference on Applied Energy (ICAE2018), Aug 22-25, 2018, Hong Kong, China.

25. Arif Darmawan, Muhammad W. Ajiwibowo, Muhammad Aziz, Koji Tokimatsu. Efficient black liquor conversion to power and H2 based on process integration and exergy recovery. CUE 2018-Applied Energy Symposium and Forum 2018: Low-Carbon Cities and Urban Energy Systems. June 5–7, 2018, Shanghai, China. Arif Darmawan, Muhammad W. Ajiwibowo, Muhammad Aziz, Koji Tokimatsu. Efficient black liquor conversion to power and H2 based on process integration and exergy recovery. Energy Procedia, 152, 1272-1277, 2018 (Oct). DOI: 10.1016/j.egypro.2018.09.181.

26. Muhammad Huda, Muhammad Aziz, Koji Tokimatsu. Potential ancillary services of electric vehicles (vehicle-to-grid) in Indonesia. CUE 2018-Applied Energy Symposium and Forum 2018: Low-Carbon Cities and Urban Energy Systems. June 5–7, 2018, Shanghai, China. Muhammad Huda, Muhammad Aziz, Koji Tokimatsu. Potential ancillary services of electric vehicles (vehicle-to-grid) in Indonesia. Energy Procedia, 152, 1218-1223, 2018 (Oct). DOI: 10.1016/j.egypro.2018.09.172.

27. Muhammad Aziz. Production, transportation, and utilization of carbon-free hydrogen. International Conference on Science and Applied Science 2018 (ICSAS 2018), May 12-13, 2018, Solo, Indonesia.

28. Muhammad Aziz, Muhammad Huda. Implementation opportunity of electric vehicles for grid ancillary services. International Conference on Science and Applied Science 2018 (ICSAS 2018), May 12-13, 2018, Solo, Indonesia.

29. Muhammad Aziz. Electric vehicles in the electrical grid: Opportunities and barriers. International Conference on Applied Science, Engineering, and Social Sciences (ICASESS) 2017, November 22-23, 2017, Yogyakarta, Indonesia. (Keynote speech)

30. Baskoro Lokahita, Anisa Mukti Abadi, Irma Natasya Hutabarat, Lucy Amena Sembiring, Rizki Tri Andrianingsih, Ganjar Samudro, Haryono Setiyo Huboyo, Muhammad Aziz, Fumitake Takahashi. Excavated Waste Characteristic from Semarang City Landfill Sites. Part 1: Physical Characteristic. International Conference on Applied Science, Engineering, and Social Sciences (ICASESS) 2017, November 22-23, 2017, Yogyakarta, Indonesia.

31. Taxwim, Puradwi Ismu Wahyono, Muhammad Kunta Biddinika, Susilo Widodo, Muhammad Aziz, Fumitake Takahashi. Strengthening scientific literacy on reactor physics and neutron application through Nuclear School. International Conference on Applied Science, Engineering, and Social Sciences (ICASESS) 2017, November 22-23, 2017, Yogyakarta, Indonesia.

32. Farid Triawan, Muhammad Kunta Biddinika, Shinya Hanaoka, Fumitake Takahashi, Muhammad Aziz. Promoting global education in science and engineering: An experience in Indonesian high schools. International Conference on Applied Science, Engineering, and Social Sciences (ICASESS) 2017, November 22-23, 2017, Yogyakarta, Indonesia.

33. Rizqi Mahfudz Prasetyo, Istifari Husna Rekinagara, Muhammad Kunta Biddinika, Muhammad Aziz, Fumitake Takahashi. Engineering students’ reference of low enthalpy geothermal potential in Parangtritis. International Conference on Applied Science, Engineering, and Social Sciences (ICASESS) 2017, November 22-23, 2017, Yogyakarta, Indonesia.

34. Rizqi Mahfudz Prasetyo, Istifari Husna Rekinagara, Barlian Dwinagara, Muhammad Kunta Biddinika, Muhammad Aziz, Fumitake Takahashi. Citizens Reference of Geothermal Direct Use Utilization in Parangtritis. International Conference on Applied Science, Engineering, and Social Sciences (ICASESS) 2017, November 22-23, 2017, Yogyakarta, Indonesia.

__________________________________________________________________________________________


35. Lukman Adi Prananto, Muhammad Fikri Ramadhana, Tubagus Muhammad Fauzi, Muhammad Aziz. Study of Kalina cycle as waste energy utilization system in Wayang Windu geothermal power plant. The International Conference on Thermal Science and Technology (ICTST) 2017. November 17-19, 2017, Bali, Indonesia.

36. Lukman Adi Prananto, Gea Fardias Mu’min, Tubagus Muhammad Fauzi, Muhammad Aziz. Dry steam cycle optimization for the utilization of excess steam at Kamojang geothermal power plant. The International Conference on Thermal Science and Technology (ICTST) 2017. November 17-19, 2017, Bali, Indonesia.

37. Baskoro Lokahita, Muhammad Aziz, Fumitake Takahashi. Preliminary estimation of potential electricity generation from landfill site in Jakarta City. 4th International Conference on Final Sinks, P-21, October 24-27, 2017, Kyoto, Japan.

38. Noviany, Arief Nurhidayat, Sutopo Hadi, Tati Suhartati, Muhammad Aziz, Neny Purwitasari, and Iman Subasman. Isolation and structure elucidation of a new naturally isolated compound from Sesbania grandiflora. The 6th International Conference of the Indonesian Chemical Society (ICICS 2017), October 17-18, 2017, Palembang, Indonesia.

39. Bentang Arief Budiman, Muhammad Aziz. On the lightweight design for electric vehicles using composite materials. 4th International Conference on Electric Vehicular Technology (ICEVT 2017). October 2-5, 2017, Bali, Indonesia.

40. Muhammad Aziz, Bentang Arief Budiman. Extended utilization of electric vehicles in electrical grid services. 4th International Conference on Electric Vehicular Technology (ICEVT 2017). October 2-5, 2017, Bali, Indonesia. Published in IEEE, 2018 (Mar). DOI: 10.1109/ICEVT.2017.8323524.

41. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Carbon-free hydrogen production from low rank coal. International Conference on Industrial Mechanical Electrical and Chemical Engineering (ICIMECE) 2017. September 13-14, Solo, Indonesia. Published in: AIP Conference Proceedings 1931, 020005, 2018 (Feb). DOI: 10.1063/1.5024059

42. Muhammad Aziz. Electric vehicle utilization for ancillary grid services. International Conference on Industrial Mechanical Electrical and Chemical Engineering (ICIMECE) 2017. September 13-14, Solo, Indonesia. Published in: AIP Conference Proceedings 1931, 030069, 2018 (Feb). DOI: 10.1063/1.5024128

43. Farid Triawan, Bentang Arief Budiman, Firman Bagja Juangsa, Lukman Adi Prananto, Muhammad Aziz. Finite element analysis on the unloading elastic modulus of aluminum foams by unit-cell model. The 2nd Annual Applied Science and Engineering Conference (AASEC 2017). August 24, 2017, Bandung, Indonesia. Published in: IOP Conf. Series: Materials Science and Engineering 288, 012069, 2017 (Dec). DOI: 0.1088/1757-899X/288/1/012069.

44. Arif Darmawan, Flabianus Hardi, Kunio Yoshikawa, Muhammad Aziz, Koji Tokimatsu. Electricity production from black liquor: a novel integrated system. 9th International Conference on Applied Energy, ICAE 2017. ID#28, August 21-24, 2017, Cardiff, UK. Arif Darmawan, Flabianus Hardi, Kunio Yoshikawa, Muhammad Aziz, Koji Tokimatsu. Electricity production from black liquor: a novel integrated system. Energy Procedia, 142, 23-28, 2017 (Dec). DOI: 10.1016/j.egypro.2017.12.005

45. Muhammad Aziz, Takuya Oda. Simultaneous quick-charging system for electric vehicle. 9th International Conference on Applied Energy, ICAE 2017. ID#68, August 21-24, 2017, Cardiff, UK. Muhammad Aziz, Takuya Oda. Simultaneous quick-charging system for electric vehicle. Energy Procedia, 142, 1811-1816, 2017 (Dec). DOI: 10.1016/j.egypro.2017.12.568

46. Lukman Adi Prananto, Tubagus Muhammad Fauzi Soelaiman, Muhammad Aziz. Utilization of excess steam through dry steam cycle at Kamojang geothermal power plant. 9th International Conference on Applied Energy, ICAE 2017. ID#156, August 21-24, 2017, Cardiff, UK. Lukman Adi Prananto, Tubagus Muhammad Fauzi Soelaiman, Muhammad Aziz. Utilization of excess steam through dry steam cycle at Kamojang geothermal power plant. Energy Procedia, 142, 160-165, 2017 (Dec). DOI: 10.1016/j.egypro.2017.12.026

47. Lukman Adi Prananto, Tubagus Muhammad Fauzi Soelaiman, Muhammad Aziz. Adoption of Kalina cycle as a bottoming cycle in Wayang Windu geothermal power plant. 9th International Conference on Applied Energy, ICAE 2017. ID#183, August 21-24, 2017, Cardiff, UK. Lukman Adi Prananto, Tubagus Muhammad Fauzi Soelaiman, Muhammad Aziz. Adoption of Kalina cycle as a bottoming cycle in Wayang Windu geothermal power plant. Energy Procedia, 142, 1147-1152, 2017 (Dec). DOI: 10.1016/j.egypro.2017.12.370

__________________________________________________________________________________________


48. Muhammad Aziz, Ilman Nuran Zaini. Production of hydrogen from algae: Integrated gasification and chemical looping. 9th International Conference on Applied Energy, ICAE 2017. ID#212, August 21-24, 2017, Cardiff, UK. Muhammad Aziz, Ilman Nuran Zaini. Production of hydrogen from algae: Integrated gasification and chemical looping. Energy Procedia, 142, 210-215, 2017 (Dec). DOI: 10.1016/j.egypro.2017.12.034

49. Arif Darmawan, Anggoro Cahyo Fitrianto, Muhammad Aziz, Koji Tokimatsu. Enhanced electricity production from rice straw. 9th International Conference on Applied Energy, ICAE 2017. ID#256, August 21-24, 2017, Cardiff, UK. Arif Darmawan, Anggoro Cahyo Fitrianto, Muhammad Aziz, Koji Tokimatsu. Enhanced electricity production from rice straw. Energy Procedia, 142, 271-277, 2017 (Dec). DOI: 10.1016/j.egypro.2017.12.043

50. Lukman Adi Prananto, Muhammad Kunta Biddinika, Muhammad Aziz. Combined dehydrogenation and hydrogen-based power generation. 9th International Conference on Applied Energy, ICAE 2017. ID#647, August 21-24, 2017, Cardiff, UK. Lukman Adi Prananto, Muhammad Kunta Biddinika, Muhammad Aziz. Combined dehydrogenation and hydrogen-based power generation. Energy Procedia, 142, 1603-1608, 2017. DOI: 10.1016/j.egypro.2017.12.537

51. Muhammad Aziz, Takuya Oda, Atsushi Morihara, Takao Kashiwagi. Production of ammonia from low rank coal employing chemical looping and Haber-Bosch process. 20th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES’17), August 21-24, 2017, Tianjin, China.

52. Muhammad Aziz. Clean and energy-efficient hydrogen production and storage from coal. 2017 IEEE International Conference on Green Energy (ICOGE 2017), July 23-26, 2017, Singapore. DOI: 10.1109/ICSGSC.2017.8038551.

53. Muhammad Aziz. Combined nitrogen production, ammonia synthesis, and power generation for efficient hydrogen storage (ammonia). World Engineers Summit - Applied Energy Symposium and Forum 2017: Low carbon cities and urban energy systems (WES-CUE 2017), July 18-21, 2017, Singapore. Muhammad Aziz, Takuya Oda, Atsushi Morihara, Takao Kashiwagi. Combined nitrogen production, ammonia synthesis, and power generation for efficient hydrogen storage. Energy Procedia, 143, 674-679, 2017 (Dec). DOI: 10.1016/j.egypro.2017.12.745.

54. Ilman Nuran Zaini, Muhammad Aziz. Algae conversion to hydrogen and power by integration of drying, gasification, and chemical looping combustion. 25th European Biomass Conference & Exhibition (EUBCE 2017), 2CV.3.26, pp. 794-798, June 12-15, 2017, Stockholm, Sweden.

55. Muhammad Aziz. Combined supercritical water gasification of algae and hydrogenation for hydrogen production and storage. International Conference on Technologies and Materials for Renewable Energy, Environment and Sustainability Spring Meeting 2017 (TMREES17), April 21-24, 2017, Beirut, Lebanon. Muhammad Aziz. Combined supercritical water gasification of algae and hydrogenation for hydrogen production and storage. Energy Procedia, 119, 530-535, 2017 (Jul). DOI: 10.1016/j.egypro.2017.07.069.

56. Muhammad Aziz. Charging/discharging behaviors and integration of electric vehicle to small-scale energy management system. Proceedings of 6th International Conference on Smart Cities and Green ICT Systems (SMARTGREENS 2017), pp. 346-351, April 22-24, 2017, Porto, Portugal. DOI: 10.5220/0006377303460351.

57. Arif Darmawan, Dwika Budianto, Kunio Yoshikawa, Muhammad Aziz, Koji Tokimatsu. Analysis of coal-cofiring with hydrothermally-treated empty fruit bunch and palm kernel shell in drop tube furnace. Japan-Korea-China Joint Symposium 2016, 2016, Shizuoka, Japan.

58. Muhammad Aziz. Highly energy-efficient conversion of lignite to H2 and power. The 8th International Conference on Applied Energy – ICAE 2016. 159, October 8-11, 2016, Beijing, China. Muhammad Aziz. Highly energy-efficient conversion of lignite to H2 and power. Energy Procedia, 105, 1495-1500, 2017 (May). DOI: 10.1016/j.egypro.2017.03.446.

59. Muhammad Aziz, Ilman Nuran Zaini. Energy-efficient conversion of microalgae to hydrogen and power. The 8th International Conference on Applied Energy – ICAE 2016. 392, October 8-11, 2016, Beijing, China. Muhammad Aziz, Ilman Nuran Zaini. Energy-efficient conversion of microalgae to hydrogen and power. Energy Procedia, 105, 453-458, 2017 (May). DOI: 10.1016/j.egypro.2017.03.340.

__________________________________________________________________________________________


60. Arif Darmawan, Dwika Budianto, Muhammad Aziz, Koji Tokimatsu. Cofiring assessment of hydrothermally-treated empty fruit bunch and low rank coal in a drop tube furnace. The 8th International Conference on Applied Energy – ICAE 2016. 256, October 8-11, 2016, Beijing, China. Arif Darmawan, Dwika Budianto, Muhammad Aziz, Koji Tokimatsu. Cofiring assessment of hydrothermally-treated empty fruit bunch and low rank coal in a drop tube furnace. Energy Procedia, 105, 1545-1550, 2017 (May). DOI: 10.1016/j.egypro.2017.03.473.

61. Arif Darmawan, Dwika Budianto, Muhammad Aziz, Koji Tokimatsu. Hydrothermally-treated empty fruit bunch cofiring in coal power plants: modeling and simulation of heat and mass flow using ASPEN plus. The 8th International Conference on Applied Energy – ICAE 2016. 258, October 8-11, 2016, Beijing, China. Arif Darmawan, Dwika Budianto, Muhammad Aziz, Koji Tokimatsu. Hydrothermally-treated empty fruit bunch cofiring in coal power plants: a techno-economic assessment. Energy Procedia, 105, 297-302, 2017 (May). DOI: 10.1016/j.egypro.2017.03.317.

62. Arif Darmawan, Flabianus Hardi, Kunio Yoshikawa, Muhammad Aziz, Koji Tokimatsu. Enhanced process integration of hydrothermal liquefaction, gasification and combined cycle: Modeling and simulation using ASPEN pus. The 8th International Conference on Applied Energy – ICAE 2016. 259, October 8-11, 2016, Beijing, China. Arif Darmawan, Flabianus Hardi, Kunio Yoshikawa, Muhammad Aziz, Koji Tokimatsu. Enhanced process integration of entrained flow gasification and combined cycle: Modeling and simulation using ASPEN plus. Energy Procedia, 105, 303-308, 2017 (May). DOI: 10.1016/j.egypro.2017.03.318.

63. Farah Alia Fauzi, Tedi Kurniawan, Yuli Panca Asmara, Mohd Hanafi Bin Ani, Muhammad Aziz. Oxidation behavior of pack-cemented P91 steel in steam condition. 1st International Conference on Advanced Energy Materials (AEM2016). 121, Sep 12-14, 2016, Guildford, UK.

64. Muhammad Aziz, Takuya Oda, Atsushi Morihara. Energy efficient co-production of hydrogen and power from brown coal employing direct chemical looping. 19th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2016). 601, Aug 27-31, 2016, Prague, Czech.

65. Muhammad Aziz, Tedi Kurniawan. Enhanced utilization of palm oil mill wastes for power generation. 19th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2016). 602, Aug 27-31, 2016, Prague, Czech.

66. Muhammad Aziz, Takuya Oda, Atsushi Morihara. Coal direct chemical looping for hydrogen and power co-production and its combination with hydrogen storage. 21st World Hydrogen Energy Conference 2016 (WHEC 2016), 633, Jun 13-16, 2016, Zaragoza, Spain.

67. Dwika Budianto, Muhammad Aziz, Cahyadi, Takuya Oda. Numerical investigation of co-firing of palm kernel shell into pulverized coal combustion. 3rd Asian Conference on Biomass Science (ACBS 2016), P04, January 19, 2016, Niigata, Japan.

68. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Novel power generation from microalgae: Application of different gasification technologies. 4th International Conference on Renewable Energy Research and Applications (ICRERA 2015), pp. 745-749, November 22-25, 2015, Palermo, Italy. DOI: 10.1109/ICRERA.2015.7418510.

69. Muhammad Aziz, Takuya Oda, Takashi Mitani, Atsuki Uetsuji, Takao Kashiwagi. Combined hydrogen production and power generation from microalgae. 4th International Conference on Renewable Energy Research and Applications (ICRERA 2015), pp. 923-927, November 22-25, 2015, Palermo, Italy. DOI: 10.1109/ICRERA.2015.7418544.

70. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Advanced utilization of biomass wastes from palm oil mill for power generation. Proceeding of The 4th International Conference on Microgeneration and Related Technologies, Pa-IV-B, pp. 12-18, ID0085, October 28-30, 2015, Tokyo, Japan.

71. Takuya Oda, Takashi Mitani, Muhammad Aziz, Takao Kashiwagi. Cost minimizing simulations for municipal energy supplies. Proceeding of The 4th International Conference on Microgeneration and Related Technologies, Pa-VI-B, pp. 20-23, ID0036, October 28-30, 2015, Tokyo, Japan.

72. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Clean hydrogen production from low rank coal: Novel integration of drying, gasification, chemical looping, and hydrogenation. 18th Conference on Process Integration, Modeling and

__________________________________________________________________________________________


Optimization for Energy Saving and Pollution Reduction (PRES’15), Chemical Engineering Transactions, August 23-27, 2015, Kuching, Malaysia.

73. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Highly energy efficient algae-based power generation: Integration of supercritical water gasification and combined cycle. Proceedings of 5th International Conference on Algal Biomass, Biofuels and Bioproducts, June 7-10, 2015, San Diego, USA.

74. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Extended utilization of electric vehicles and their re-used batteries to support the building energy management system. The 7th International Conference on Applied Energy-ICAE2015, 608, Energy Procedia 75, pp. 1938-1943, March 27-31, 2015, Abu Dhabi, UAE. DOI: 10.1016/j.egypro.2015.07.226. Muhammad Aziz, Oda Takuya, Takao Kashiwagi. Extended utilization of electric vehicles and their re-used batteries to support the building energy management system. Energy Procedia 75, 1938-1943, 2015 (Aug). DOI: 10.1016/j.egypro.2015.07.226.

75. Muhammad Aziz, Takuya Oda, Takashi Mitani, Takumi Kurokawa, Norihiro Kawasaki, Takao Kashiwagi. Enhanced energy utilization system of algae: Integrated drying, gasification and combined cycle. The 7th International Conference on Applied Energy-ICAE2015, 229, Energy Procedia 75, pp. 906-911, March 27-31, 2015, Abu Dhabi, UAE. DOI: 10.1016/j.egypro.2015.07.229. Muhammad Aziz, Takuya Oda, Takashi Mitani, Takumi Kurokawa, Norihiro Kawasaki, Takao Kashiwagi. Enhanced energy utilization system of algae: Integrated drying, gasification and combined cycle. Energy Procedia 75, 906-911, 2015 (Aug). DOI: 10.1016/j.egypro.2015.07.229.

76. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Novel energy harvesting from empty fruit bunch through integrated drying, gasification and combined cycle. Proceedings of 2nd Asian Conference on Biomass Science (ACBS), P01, pp. 107-112, January 13, 2015, Tsukuba, Japan.

77. Muhammad Aziz, Takuya Oda, Takumi Kurokawa, Takao Kashiwagi. Integrated energy-efficient hydrogen production from low rank coal and its storage for transportation. 2nd International Congress on Energy Efficiency and Energy Related Materials (ENEFM2014), 52, October 16-19, 2014, Oludeniz, Turkey, Editors: A.Y. Oral et al. Springer Proceedings in Energy, pp. 179-185, 4 ISBN 978-3-319-16900-2, DOI: 10.1007/978-3-319-16901-9_22.

78. Oda Takuya, Muhammad Aziz, Mitani Takashi, Kashiwagi Takao. Specifications and waiting time for quick charge station of electric vehicle. Proceedings of World Renewable Energy Congress 13 (WREC XIII), pp. 1-7, August 3-8, 2014, London, UK.

79. Mitani Takashi, Oda Takuya, Muhammad Aziz, Kashiwagi Takao. A verification of photovoltaic generator and battery on electric vehicles by energy management system. Proceedings of World Renewable Energy Congress 13 (WREC XIII), pp. 1-6, August 3-8, 2014, London, UK.

80. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Advanced utilization of marine biomass for power generation. Proceedings of World Renewable Energy Congress 13 (WREC XIII), pp. 1-7, August 3-8, 2014, London, UK,

81. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Advanced integrated utilization of microalgae for power generation. Proceedings of Grand Renewable Energy 2014 International Conference and Exhibition, O-Bm-4-2, July 27-August 1, 2014, Tokyo, Japan.

82. Muhammad Aziz, Takuya Oda, Atsushi Morihara, Tomoyuki Murakami, Nobuo Momose. Utilization of EVs and their used batteries in factory load leveling. Proceedings of Innovative Smart Grid Technologies 2014, pp. 1-5, February 19-22, 2014, Washington, DC, USA, DOI: 10.1109/ISGT.2014.6816370, ISBN: 978-1-4799-3652-6

83. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Design and analysis of energy-efficient integrated crude palm oil and palm kernel oil processes. Proceedings of 1st Asian Conference on Biomass Science, pp. 79-86, January 14, 2014, Kochi, Japan

84. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Integration of supercritical water gasification and combined cycle processes for microalgae. Proceedings of 4th International Conference on Advances in Energy Research (ICAER), pp. 404-409, December 9-12, 2013, Indian Institute of Technology Bombay, Mumbai, India (ISBN: 978-81-928795-0-5).

85. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Energy efficient algae utilization based on enhanced process integration. Proceedings of 2nd International Conference on Renewable Energy Research and Applications (ICRERA

__________________________________________________________________________________________


2013), pp. 395-400, October 20-23, 2013, Madrid, Spain, ISBN: 978-1-4799-1464-7/13, DOI: 10.1109/ICRERA.2013.6749787.

86. Yuping Liu, Muhammad Aziz, Yasuki Kansha and Atsushi Tsutsumi. A novel exergy recuperative drying module and its application for energy-saving drying with superheated steam. Proceedings of 11th International Conference on Gas-Liquid & Gas-Liquid-Solid Reactor Engineering, pp. 392-401, August 19-22, 2013, Seoul, South Korea.

87. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Innovative energy-efficient algae utilization based on process integration and exergy recovery. Proceedings of 3rd International Conference on Algal Biomass, Biofuels and Bioproducts, June 16-19, 2013, Toronto, Canada.

88. Muhammad Aziz, Oda Takuya, Takao Kashiwagi. Innovative integrated marine biomass utilization. Proceedings of 2nd International Conference on Energy Systems and Technologies (ICEST 2013), pp. 1-10, February 18-22, 2013, Cairo, Egypt.

89. Muhammad Aziz, Oda Takuya, Takao Kashiwagi. Efficient and low energy marine biomass drying implementing exergy recovery technology. Proceedings of 18th International Drying Symposium, D5, pp. 1-8, November 11-15, 2012, Xiamen, Fujian, China.

90. Yuping Liu, Muhammad Aziz, Yasuki Kansha and Atsushi Tsutsumi. Self-heat recuperative fluidized bed drying of low rank coal. Proceedings of 29th International Pittsburgh Coal Conference, pp. 2324-2332, October 15-18, 2012, Pittsburgh, PA, USA (ISBN: 978-1-62276-786-1)

91. Yuping Liu, Muhammad Aziz, Yasuki Kansha and Atsushi Tsutsumi. Superheated steam fluidized bed drying of biomass with self-heat recuperation technology. Proceedings of Australia-China Joint Workshop on Clean Technologies of Coal and Biomass Utilization (CTCBU), pp. 1-6, June 27-29, 2012, Anshan, China.

92. Yuping Liu, Muhammad Aziz, Yasuki Kansha, Atsushi Tsutsumi. Drying energy saving by applying self-heat recuperation technology to drying system. Proceedings of 20th International Congress of Chemical and Process Engineering (CHISA 2012) and the 15th Conference on Process Integration, Modeling and Optimization for Energy Saving and Pollution Reduction (PRES’12), pp. 891-894, August 25-29, 2012, Prague, Czech.

93. Yuping Liu, Muhammad Aziz, Chihiro Fushimi, Yasuki Kansha, Kazuhiro Mochidzuki, Shozo Kaneko, Atsushi Tsutsumi, Keigo Matsumoto, Takao Hashimoto, Noboru Kawamoto, Koji Oura, Katsuhiko Yokohama, Yoshiki Yamaguchi, Masaaki Kinoshita. Exergy recuperative fluidized bed drying of rice straw. 14th Asia Pacific Confederation of Chemical Engineering, pp. 809-813, February 21-24, 2012, Singapore, ISBN: 978-981-07-1445-1.

94. Yasuki Kansha, Akira Kishimoto, Muhammad Aziz, Atsushi Tsutsumi. Theory of process design based on self-heat recuperation (736b). Proceedings of AIChE Annual Meeting 2011, ID 227353, October 16-21, 2011, Menneapolis, USA.

95. Yui Kotani, Muhammad Aziz, Yasuki Kansha, Chihiro Fushimi, Atsushi Tsutsumi. Magnetic heat circulator based on self-heat recuperation (763e). Proceedings of AIChE Annual Meeting 2011, ID 226343, October 16-21, 2011, Menneapolis, USA.

96. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Application of high energy efficient heat circulation technology in low rank coal drying. Proceedings of World Renewable Energy and Energy Efficiency Conference 2011, October 17-19, 2011, ID: 132FP, Nusa Dua, Bali, Indonesia.

97. Muhammad Aziz, Chihiro Fushimi, Yasuki Kansha, Kazuhiro Mochidzuki, Shozo Kaneko, Atsushi Tsutsumi. Design of exergy recuperative fluidized bed drying system for biomass (557f). Proceedings of AIChE Annual Meeting 2010, ID: 193729, November 7-12, 2010, Salt Lake, USA.

98. Muhammad Aziz, Chihiro Fushimi, Yasuki Kansha, Kazuhiro Mochidzuki, Shozo Kaneko, Atsushi Tsutsumi. Innovative fluidized bed biomass drying employing exergy recuperation technology. Proceedings of 10th China-Japan on Fluidization (Fluidization ’10), pp. 176-181, November 17-19, 2010, Tokyo, Japan.

99. Muhammad Aziz, Chihiro Fushimi, Yasuki Kansha, Kazuhiro Mochidzuki, Shozo Kaneko, Atsushi Tsutsumi. Innovative high energy-efficient brown coal drying based on self-heat recuperation technology. Proceedings of 27th International Pittsburgh Coal Conference, pp. 1450-1459, October 11-14, 2010, Istanbul, Turkey.

100. Muhammad Aziz, Chihiro Fushimi, Yasuki Kansha, Kazuhiro Mochidzuki, Shozo Kaneko, Atsushi Tsutsumi, Keigo Matsumoto, Katsuhiko Yokohama, Kenichiro Kosaka, Noboru Kawamoto, Koji Oura, Yoshiki Yamaguchi, Masaaki Kinoshita. Innovative energy efficient biomass drying based on self-heat recuperation technology. Proceedings of

__________________________________________________________________________________________


International Drying Symposium 2010, pp. 729-737, October 3-6, 2010, Magdeburg, Germany (ISBN: 978-3-86912-037-9).

101. Osamu Ohnishi, Hiromichi Onikura, Toshihiko Eguchi, Muhammad Aziz, Toshiro Doi, Syuhei Kurokawa. Improvement in drilling performance of micro compound tool. Proceedings of International Conference on Precision Engineering (ICOPE 2010 & 13th ICPE), pp. 96-100, 28-30 July 2010, Singapore.

102. Osamu Ohnishi, Hiromichi Onikura, Muhammad Aziz, Toshihiko Eguchi. Efficient quality improvement of micro hole by compound tool consisting of drill and electroplated parts. Proceedings of the 10th anniversary International Conference of the European society for precision engineering and nanotechnology, Vol. II, pp. 498-501, May 18-22, 2008, Zurich, Switzerland.

103. Muhammad Aziz, Osamu Ohnishi, Hiromichi Onikura, Nuraslina Sharkawi, Weichen Kuo. Fabrication of micro compound tools and their application in drilling. Proceedings of the 4th International Conference on Leading Edge Manufacturing in 21st Century, pp. 197-202, November 7-9, 2007, Fukuoka, Japan.

104. Muhammad Aziz, Ohnishi Osamu, Onikura Hiromichi, Tsuruoka Sho, Min Seung-Ki, Koga Toshinobu. The performance of micro long flat drill with a diameter of 20 μm in drilling into duralumin and stainless steel. Proceedings of the 8th International Conference on Progress of Machining Technology, pp. 373-376, November 7-12, 2006, Matsue, Japan.

105. Osamu Ohnishi, Hiromichi Onikura, Muhammad Aziz, Sho Tsuruoka, Seung-Ki Min, Toshinobu Koga. The effects of ultrasonic vibration on micro drilling performance with a diameter of 5 μm into titanium alloy. Proceedings of the 6th Int. Conference and 8th general meeting of the European society for precision engineering and nanotechnology, pp. 20-23, May 28-June 1, 2006, Baden bei Wien, Austria.

106. Osamu Ohnishi, Hiromichi Onikura, Seung-Ki Min, Muhammad Aziz, Ameer Wahdi, Toshinobu Koga. Fabrication of micro flat drills composed of 90 nm WC grain with a diameter less than 10 micrometers and their drilling performance. Proceedings of the 5th International Conference and 7th general meeting of the European society for precision engineering and nanotechnology, Vol.2, pp. 585-588, May 8-11, 2005, Montpellier, France.

OTHER INTERNATIONAL AND DOMESTIC CONFERENCES (PROCEEDINGS) 1. Takuya Oda, Takafumi Maekawa, Yoko Watanabe, Muhammad Aziz, Takao Kashiwagi. Questionnaire survey results

of charging necessity for electric vehicle users. Proceedings of 34th Energy, Economy, and Environment Conference, January 25-26, 2018, Tokyo, Japan. (in Japanese).

2. Arif Darmawan, Flabianus Hardi, Kunio Yoshikawa, Muhammad Aziz, Koji Tokimatsu. Black liquor utilization for electricity production: an enhanced integrated system. 5th UK-Japan Engineering Education League Workshop (UKJEEL), September 7-8, 2017, Glasgow, UK.

3. Baskoro Lokahita, Muhammad Aziz, Fumitake Takahashi. Simulation of excavated waste from landfill for power generation in steam turbine power plant. Proceedings of The 28th Annual Conference of Japan Society of Material Cycles and Waste Management (JSMCWM), FC-3, pp. 567-568, September 6-8, 2017, Tokyo, Japan.

4. Maekawa Takafumi, Takuya Oda, Yoko Watanabe, Muhammad Aziz, Takao Kashiwagi. Charging behaviors of electric vehicles on quick charging stations-The relation between density of quick charging station and charge electric energy. Proceedings of the 2017 IEEJ Power and Energy Society Annual Conference, September 5-7, 2017, Tokyo, Japan (in Japanese).

5. Takashi Mitani, Takuya Oda, Muhammad Aziz, Atsuki Uetsuji, Yoko Watanabe, Takao Kashiwagi. Analysis for possibility of installation of electrolyzer. Proceedings of the 2017 IEEJ Annual Meeting, C22-A1, Vol. 6, pp. 173, Presentation number 6-110, March 15-17, 2017, Toyama, Japan (in Japanese).

6. Takuya Oda, Takafumi Maekawa, Yoko Watanabe, Muhammad Aziz, Takao Kashiwagi. Charging behaviors of electric vehicles on quick charging stations – Influence of secular change and congestion on charging electricity -. Proceedings of 33rd Energy, Economy, and Environment Conference, 21-3, pp. 427-432, February 2-3, 2017, Tokyo, Japan (in Japanese).

__________________________________________________________________________________________


7. Dwika Budianto, Cahyadi, Muhammad Aziz. Modeling and experimental studies on co-firing behavior of palm kernel shell and low rank coal in drop tube furnace (DTF) reactor. Annual Seminar of Mechanical Engineering XV (Seminar Nasional Tahunan Teknik Mesin 2016, SNTTM XV), October 5-7, 2016, Bandung, Indonesia (in Indonesian).

8. Takashi Mitani, Takuya Oda, Atsuki Uetsuji, Muhammad Aziz, Yoko Watanabe, Takao Kashiwagi. Impact analysis of massive renewable energy installation to generator operation: Thermal and pumped-storage unit commitment. Proceedings of the 2016 IEEJ Power and Energy Society Annual Conference, 5-3-20, pp. 5-3-13 – 5-3-21, September 7-9, 2016, Kitakyushu, Japan (in Japanese).

9. Takashi Mitani, Atsuki Uetsuji, Takuya Oda, Muhammad Aziz, Yoko Watanabe, Takao Kashiwagi. Annual Estimation of Supply and Demand Adjustment with Massive Renewable Energy- Formulation of Unit Commitment for Thermal and Pumped generators -. Proceedings of The 2016 IEEJ Annual Meeting, 6-138, pp. 216-217, March 16-18, 2016, Sendai, Japan (in Japanese).

10. Atsuki Uetsuji, Takashi Mitani, Takuya Oda, Muhammad Aziz, Yoko Watanabe, Takao Kashiwagi. Annual Estimation of Supply and Demand Adjustment with Massive Renewable Energy- Analysis on Effect of LFC on Suppressed PV and Operation Cost-. Proceedings of The 2016 IEEJ Annual Meeting, 6-139, pp. 218-219, March 16-18, 2016, Sendai, Japan (in Japanese).

11. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Integrated process for energy harvesting from microalgae: Integration of supercritical water gasification and combined cycle. Proceedings of 24th Annual Meeting of Japan Institute of Energy, 3-10-2, pp. 134-135, August 3-4, 2015, Sapporo, Japan (in Japanese).

12. Mitani Takashi, Takuya Oda, Muhammad Aziz, Takao Kashiwagi. A study on estimation method for customer’s reaction towards other photovoltaic installations. Proceedings of 34th Annual Meeting of Japan Society of Energy and Resources, pp. 1-1-104, June 9-10, 2015, Tokyo, Japan (in Japanese).

13. Takuya Oda, Muhammad Aziz, Takashi Mitani, Takao Kashiwagi. The Number of Quick Charge Station and Quick Charger for Electric Vehicle – Basic Study Considering the Traffic Density -. Proceedings of 34th Annual Meeting of Japan Society of Energy and Resources, pp. 33-36, June 9-10, 2015, Tokyo, Japan (in Japanese).

14. Takuya Oda, Muhammad Aziz, Takashi Mitani, Takao Kashiwagi. Cost benefit of quick charger for electric vehicle considering station access and charger extension. Proceedings of 31st Energy, Economy, and Environment Conference, pp. 475-478, January 27-28, 2015, Tokyo, Japan (in Japanese).

15. Norihiro Kawasaki, Takashi Mitani, Tetsuji Tomita, Muhammad Aziz, Takuya Oda, Atsushi Morihara, Kurosuke Kurokawa. A Study on a power balancing system using hydrogen production/storage for surplus power of photovoltaic power generation. Proceedings of 26th Annual Meeting of Japan Solar Energy Society, November 13-14, 2014, Fukushima, Japan (in Japanese).

16. Takashi Mitani, Takuya Oda, Muhammad Aziz, Takao Kashiwagi. A method for equal opportunity of PV outputs among customers. Proceedings of 2014 IEEJ Power and Energy Society Annual Conference, September 10-12, 2014, Kyoto, Japan (in Japanese).

17. Takuya Oda, Muhammad Aziz, Takashi Mitani, Takao Kashiwagi. Congestion and effect of charger addition in the quick charger station. Proceedings of 25th Power and Energy Society Annual Conference, September 10-12, 2014, Kyoto, Japan (in Japanese).

18. Yasuki Kansha, Yui Kotani, Muhammad Aziz, Akira Kishimoto, Atushi Tsutsumi. Evaluation of a self-heat recuperative thermal process based on thermodynamic irreversibility. Proceedings of 46th SCEJ Autumn Meeting, September 17-19, 2014, Fukuoka, Japan (in Japanese).

19. Takuya Oda, Muhammad Aziz, Takao Kashiwagi. Actual use of captive power in business sector in Indonesia. Proceedings of 30th Energy System, Economy, Environment Conference, January 23-24, 2014, Tokyo, Japan (in Japanese).

20. Yuping Liu, Yasuki Kansha, Atsushi Tsutsumi, Muhammad Aziz, Chihiro Fushimi. An energy saving drying system based on self-heat recuperation technology. Proceeding of 21st Annual Meeting of Japan Institute of Energy, August 6-7, 2012, Tokyo, Japan (in Japanese).

21. Yui Kotani, Muhammad Aziz, Yasuki Kansha, Chihiro Fushimi, Atsushi Tsutsumi. Magnetic heat-circulator based on self-heat recuperation. Proceedings of 20th Annual Meeting of Japan Institute of Energy, August 9-10, 2011, Osaka, Japan (in Japanese).

__________________________________________________________________________________________


22. Chihiro Fushimi, Muhammad Aziz, Yasuki Kansha, Kazuhiro Mochidzuki, Shozo Kaneko, Atsushi Tsutsumi, Shogo Sawa, Keisuke Matsuo, Keigo Matsumoto, Katsuhiko Yokohama, Yasuo Soda, Katsuhiko Shinoda, Kazuyuki Myoyo, Koji Oura, Yoshiki Yamaguchi, Masaaki Kinoshita, Takao Hashimoto. Energy saving of biomass drying by self-heat recuperation technology. Proceedings of 20th Annual Meeting of Japan Institute of Energy, August 9-10, 2011, Osaka, Japan (in Japanese).

23. Muhammad Aziz, Atsushi Tsutsumi. Exergy Recuperation and Its Application into Industrial Processes. Annual Meeting of Science and Technology Studies (AMSTECS2011), March 19-20, 2011, Tokyo, Japan.

24. Muhammad Aziz, Chihiro Fushimi, Yasuki Kansha, Kazuhiro Mochidzuki, Shozo Kaneko, Atsushi Tsutsumi, Shogo Sawa, Keisuke Matsuo, Koji Oura, Katsuhiko Yokohama, Yoshiki Yamaguchi, Katsuhiko Shinoda, Masaaki Kinoshita. Development of self-heat recuperation based biomass drying, Proceedings of 19th Annual Meeting of Japan Institute of Energy, August 2-3, 2010, Osaka, Japan (in Japanese).

25. Chihiro Fushimi, Muhammad Aziz, Yasuki Kansha, Kazuhiro Mochidzuki, Shozo Kaneko, Atsushi Tsutsumi, Keigo Matsumoto, Noboru Kawamoto, Koji Oura, Katsuhiko Yokohama, Yoshiki Yamaguchi, Masaaki Kinoshita. Innovative biomass drying based on self-heat recuperation technology. Proceedings of 75th SCEJ Annual Meeting, March 18-20, 2010, Kagoshima, Japan (in Japanese).

26. Muhammad Aziz. The development of high efficiency biomass drying technology, 2nd JSPS-NRCT Summer School “Biomass Energy in Asia”, Bangkok, September 7-9, 2009.

27. Muhammad Aziz, Osamu Ohnishi, Toshihiko Eguchi, Hiromichi Onikura. Machining performance of compound tool designed for micro drilling. Proceedings of 2007 Annual Meeting of Japan Society for Precision Engineering Kyushu Branch, December 8-9, 2007, Nagasaki, Japan (in Japanese).

28. Seung-Ki Min, Osamu Ohnishi, Hiromichi Onikura, Takao Sajima, Muhammad Aziz, Sho Tsuruoka. Ultrasonic vibration assisted micro grooving and its performance. Proceedings of 2006 Annual Meeting of Japan Society for Precision Engineering Kyushu Branch Fukuoka Area, December 2-3, 2006, Fukuoka, Japan (in Japanese).

29. Nuraslina Sharkawi, Muhammad Aziz, Weichen Kuo, Hiromichi Onikura, Osamu Ohnisi. Micro drilling using drill and electrodeposited compound tool into stainless steel sheet. Proceedings of 2006 Annual Meeting of Japan Society for Precision Engineering Kyushu Branch Fukuoka Area, December 2-3, 2006, Fukuoka, Japan (in Japanese).

30. Muhammad Aziz, Osamu Ohnishi, Hiromichi Onikura, Sho Tsuruoka, Seung-Ki Min, Toshinobu Koga. Development of micro long flat drills and their characteristics in drilling. Kyushu University-KAIST Joint Seminar, September 15, 2006, Fukuoka.

31. Muhammad Aziz, Osamu Ohnishi, Hiromichi Onikura, Seung-Ki Min, Sho Tsuruoka, Toshinobu Koga. Fabrication of micro long drill having diameter of 20μm and its drilling performance. Proceedings of 2005 Annual Meeting of Japan Society for Precision Engineering Kyushu Branch, November 12, 2005, Kagoshima, Japan (in Japanese).

32. Seung-Ki Min, Osamu Ohnishi, Hiromichi Onikura, Takao Sajima, Muhammad Aziz, Sho Tsuruoka. Fabrication of micro end mill having diameter of 20 μm and its grooving performance. Proceedings of 2005 Annual Meeting of Japan Society for Precision Engineering Kyushu Branch, November 12, 2005, Kagoshima, Japan (in Japanese).

33. Osamu Ohnishi, Hiromichi Onikura, Seung-Ki Min, Muhammad Aziz, Sho Tsuruoka, Toshinobu Koga. Ultrasonic vibration assisted drilling of titanium alloy with micro drill. Proceedings of 2005 Annual Autumn Meeting of Japan Society for Precision Engineering, September 14-18, 2005, Kyoto, Japan (in Japanese).

34. Osamu Ohnishi, Hiromichi Onikura, Seung-Ki Min, Muhammad Aziz, Ameer Wahdi, Toshinobu Koga. Manufacturing of micro drill having diameter of 7 μm and its performance. Proceedings of 2005 Annual Spring Meeting of Japan Society for Precision Engineering, March 16-18, 2005, Tokyo, Japan (in Japanese).

35. Osamu Ohnishi, Hiromichi Onikura, Seung-Ki Min, Toshinobu Koga, Muhammad Aziz, Ameer Wahdi. Fabrication of micro flat drill with diameter of 10 μm and its micro drilling performance with ultrasonic vibration assistance. Proceedings of 2004 Annual Autumn Meeting of Japan Society for Precision Engineering, September 15-17, 2004, Shimane, Japan (in Japanese).

36. Muhammad Aziz, Osamu Ohnishi, Hiromichi Onikura, Seung-Ki Mi, Ameer Wahdi, Toshinobu Koga. Fabrication of micro drill made of tungsten carbide with particle diameter of 90 nm. Proceedings of 2004 Annual Meeting of Japan Society for Precision Engineering Kyushu Branch, December 2, 2004, Miyazaki, Japan, (in Japanese).

__________________________________________________________________________________________


37. Akio Katsuki, Hiromichi Onikura, Takao Sajima, Akira Mori, Yutaka Hamano, Hyung-Gu Park, Muhammad Aziz. Development of laser guided deep hole internal grinding tool: Performance analysis. Proceedings of 2004 Annual Spring Meeting of Japan Society for Precision Engineering, March 16-18, 2004, Tokyo, Japan, (in Japanese).

TRANSLATIONS 1. Muhammad Aziz, Tedi Kurniawan, Takuya Oda, Takao Kashiwagi. Generación avanzada de energía a partir de la

biomasa residual en plantas de beneficio de aceite de palma. (Carlos Arenas trad.). Palmas, 39(2), 27-46. Translated from: Muhammad Aziz, Tedi Kurniawan, Takuya Oda, Takao Kashiwagi. Advanced power generation utilizing biomass wastes from palm oil mills. Applied Thermal Engineering, 114, 1378-1386, 2017 (Mar). DOI: 10.1016/j.applthermaleng.2016.11.031.

KEYNOTES AND INVITED SPEECHES (limited to scientifically organized conferences, workshops and seminars; excluding invited and general lectures) 1. Muhammad Aziz. Toward realization of green sustainable energy systems. Borneo International Conference on Applied

Mathematics and Engineering, (BICAME), Dec 10-11, 2018, Balikpapan, Indonesia. (Keynote) 2. Muhammad Aziz. Implementation opportunity of electric vehicles for grid ancillary services. 5th International

Conference on Electric Vehicular Technology (ICEVT 2018), Oct 30-31, 2018, Solo, Indonesia. (Keynote) 3. Muhammad Aziz. Advanced green technologies toward future sustainable energy systems. 1st Science & Technology

Research Symposium (SiRes), Oct 22-23, 2018, Bandung, Indonesia. (Invited) 4. Muhammad Aziz. Toward sustainability: Energy systems in the future. The 1st Annual Scientific Symposium of

Indonesian Collegians in Japan (ASSIGN), Jul 21, 2018, Tokyo, Japan. (Panel) 5. Muhammad Aziz. Advanced utilization of electric vehicles in the future electrical grid systems. 10th Japan Muslim

Researcher’s Interdisciplinary Symposium (JMRIS 2018), Jun 30, 2018, Tokyo, Japan. (Invited) 6. Muhammad Aziz. Implementation of electric vehicles for ancillary services in the electrical grid. International

Conference on Electrical Engineering and Green Energy 2018 (CEEGE 2018), Jun 1-3, 2018, Tokyo, Japan. (Invited). 7. Muhammad Aziz. Implementation opportunity of electric vehicles for grid ancillary services. International Conference

on Science and Applied Science 2018 (ICSAS 2018), May 12-13, 2018, Solo, Indonesia (Keynote). 8. Muhammad Aziz. Collaboration with Industries and University Research Center. Invited talk, Workshop on Academic

Draft and Strategic Planning PIAT UGM (Workshop Pengembangan Naskah Akademik dan Perencanaan Strategis PIAT UGM), Gadjah Mada University. November 24, 2017, Yogyakarta, Indonesia. (in Indonesian) (Keynote)

9. Muhammad Aziz. Electric Vehicles in the Electrical Grid: Opportunities and Barriers. Keynote speech, International Conference on Applied Science, Engineering, and Social Sciences (ICASESS) 2017, November 22-23, 2017, Yogyakarta, Indonesia (Keynote).

10. Muhammad Aziz. Extended utilization of electric vehicles in electrical grid services. Keynote speech, 4th International Conference on Electric Vehicular Technology, October 2-5, Bali, Indonesia (Keynote).

11. Muhammad Aziz. Invited speech, 3rd International Conference on Industrial, Mechanical, Electrical, and Chemical Engineering (ICIMECE 2017), September 13-14, 2017, Surakarta, Indonesia (Invited).

12. Muhammad Aziz. Advanced energy production based on exergy recovery and process integration. Invited speech, I2CNER (International Institute for Carbon-Neutral Energy Research) International Workshop 2017. February 3, 2017, Fukuoka (Kyushu University), Japan. (Invited)

13. Muhammad Aziz. Hydrogen to coal. Invited speech, National Technology Congress 2016 (Kongres Teknologi Nasional 2016, KTN), July 25-27, 2016, Jakarta, Indonesia (in Indonesian). (Invited)

14. Muhammad Aziz, Utilization of electric vehicles in supporting grid electricity and development of their quick chargers for simultaneous charging. Keynoted speech, National Seminar on Power and Application (Seminar Nasional Ketenagalistrikan dan Aplikasinya – SENKA 2015), August 19-20, 2015, Bandung, Indonesia. (in Indonesian). (Keynote)

__________________________________________________________________________________________


15. Muhammad Aziz. Building a research carrier. Invited speech, 7th Japan Muslim Researcher’s Interdisciplinary Symposium (JMRIS), January 24, 2015, Tokyo, Japan. (Invited)

16. Muhammad Aziz. Energy and its future trends in Indonesia. 9th AES Evening Seminar, September 18, 2013, Tokyo (in Japanese).

17. Muhammad Aziz. Integrated biomass utilization processes based on innovative enhanced process integration. Invited speech, Seminar of Agricultural Sciences IASA (Indonesian Agricultural Sciences Association) 2013, November 9, 2013, Tokyo University, Tokyo, Japan. (Invited)

18. Muhammad Aziz. Self-heat recuperation based biomass drying. Invited speech, Proceedings of 9th Co-production Workshop, February 5, 2010, Tokyo. (Tokyo University, in Japanese).

GENERAL LECTURES 1. Toward clean and smart community: One research moves in the energy systems. The University of Sydney, Dec 17, 2018,

Sydney, Australia. 2. Future Sustainable Energy Systems. Sebelas Maret University, Nov 1, 2018, Solo, Indonesia. (in Indonesian) 3. Scientific Writing for International Publication. Indonesia University of Education, Oct 22, 2018, Bandung, Indonesia.

(in Indonesian) 4. Improving Research Quality Toward International Publication. Sangga Buana University, Oct 19, 2018, Bandung,

Indonesia. (in Indonesian) 5. Preparing and Writing Qualified Academic Journal. University of Pattimura, August 16, 2018, Ambon, Indonesia. (in

Indonesian) 6. Toward Sustainability. University of Pattimura, August 15, 2018, Ambon, Indonesia. (in Indonesian) 7. Building Mutual Collaboration among Academic, Industries and Government: AES Center Experiences. Focus Group

Discussion. Sebelas Maret University. December 20, 2017, Solo, Indonesia. (in Indonesian) 8. Development of Advanced Energy Systems. General Lecture. Sebelas Maret University, December 19, 2017, Solo,

Indonesia. (in Indonesian) 9. Writing Academic Journal: Some Experience-Based Tips. General Lecture. Sebelas Maret University, December 18, 2017,

Solo, Indonesia. (in Indonesian) 10. Utilization of Electric Vehicles for Grid’s Ancillary Services. General lecture, State University of Malang. November 27,

2017. Malang, Indonesia. (in Indonesian) 11. Utilization of Electric Vehicles for Grid’s Ancillary Services. General lecture, Ahmad Dahlan University. November 22,

2017. Yogyakarta, Indonesia. (in Indonesian) 12. Utilization of Electric Vehicles for Grid’s Ancillary Services General lecture, Janabadra University. November 23, 2017,

Yogyakarta, Indonesia. (in Indonesian) 13. General lecture, Nahdlatul Ulama University. November 23, 2017, Yogyakarta, Indonesia. (in Indonesian) 14. Development of Advanced Energy Systems. General lecture, State University of Malang. November 27, 2017. Malang,

Indonesia. (in Indonesian) 15. Massive Adoption of Electric Vehicles in the Electrical Grid. State University of Malang, November 27, 2017, Malang,

Indonesia. (in Indonesian) 16. Development of Advanced Energy Systems. State University of Malang, November 27, 2018. Malang, Indonesia. (in

Indonesian) 17. Open Innovation and Research Development. State University of Malang, November 15, 2018. Malang, Indonesia. (in

Indonesian) 18. Research Based Education. State University of Malang, November 13, 2018. Malang, Indonesia. (in Indonesian) 19. Open innovation. Guest lecture, Ahmad Dahlan University, October 6, 2017, Yogyakarta, Indonesia. (in Indonesian)

__________________________________________________________________________________________


20. Collaboration building among industries, academics and governments. Guest lecture, Gadjah Mada University, October 5, 2017, Yogyakarta, Indonesia. (in Indonesian)

21. Towards high global competitiveness. Open lecture, Gadjah Mada University, October 5, 2017, Yogyakarta, Indonesia. (in Indonesian)

22. Present and future prospects of Japanese energy. KTH Royal University, Lab seminar, September 18, 2017, Stockholm, Sweden.

23. Towards high global competitiveness. Guest lecture, Islam Indonesia University, September 15, 2017, Yogyakarta, Indonesia. (in Indonesian)

24. Present status and future prospect of Japanese energy policy, Agency for the Assessment and Application of Technology (BPPT), invited speaker, September 11, 2017, Serpong, Indonesia. (in Indonesian)

25. How to add a journal to Scopus. Lampung University, December 22, 2016 (in Indonesian) 26. Writing a scientific paper: How to’s and some tips. Lampung University, December 21, 2016 (in Indonesian) 27. Energy in Indonesia, NTT Facilities, Nov 11, 2013, Tokyo (in Japanese). OTHER PUBLICATIONS 1. Muhammad Aziz. Thermal heat storage. Strategic Proposal/Panoramic View Report 2017. Center for Research and

Development Strategy (CRDS), Japan Science and Technology Agency (JST). 2016. 2. Muhammad Aziz. Foreigner’s study and research activities in Japan. CEE Newsletter (Collaborative Research Center

for Energy Engineering), No. 9, pp. 13, March 2011 (in Japanese). 3. Muhammad Aziz. Energy condition in Indonesia: Present and future trends. AES News, No. 6, Summer, July, 2016 (in

Japanese) ACADEMIC JOURNAL REVIEWING ACTIVITIES 1. ACS Sustainable Chemistry & Engineering, ACS. 2. Advances in Mechanical Engineering, Sage. 3. Applied Energy, Elsevier. 4. Applied Sciences, MDPI. 5. Applied Thermal Engineering, Elsevier 6. Biomass & Bioenergy, Elsevier. 7. Bioresource Technology, Elsevier. 8. Biosystems Engineering, Elsevier. 9. Case Studies in Thermal Engineering, Elsevier. 10. Chemical Engineering Science, Elsevier 11. Chemical Engineering & Technology, Wiley 12. Clean Technologies and Environmental Policy, Springer. 13. Desalination, Elsevier 14. Drying Technology, Taylor & Francis. 15. Electric Power Systems Research, Elsevier. 16. Energies, MDPI. 17. Energy, Elsevier. 18. Energy & Fuels, ACS. 19. Energy Conversion and Management, Elsevier. 20. Energy Efficiency, Springer.

__________________________________________________________________________________________


21. Energy Procedia, Elsevier. 22. Energy Science & Engineering, Wiley. 23. Fuel Processing Technology, Elsevier 24. Frontiers in Energy, Springer. 25. Frontiers in Energy Research, Frontiers. 26. IEEE Transactions on Smart Grid, IEEE. 27. International Journal of Coal Preparation and Utilization, Taylor & Francis. 28. International Journal of Energy Research, Wiley. 29. International Journal of Food Engineering, De Gruyter. 30. International Journal of Heat and Mass Transfer, Elsevier. 31. International Journal of Hydrogen Energy, Elsevier. 32. International Journal of Refrigeration, Elsevier. 33. Journal of Chemical Engineering of Japan, the Society of Chemical Engineers, Japan. 34. Journal of Cleaner Production, Elsevier. 35. Journal of Energy Storage, Elsevier. 36. Journal of Engineering Manufacture, Sage. 37. Journal of Environmental Management, Elsevier 38. Journal of CO2 Utilization, Elsevier. 39. Journal of Industrial and Engineering Chemistry, Elsevier. 40. Journal of Japan Society of Energy and Resources, Japan Society of Energy and Resources. 41. Journal of Mechanical Science and Technology, Springer. 42. Journal of Power Sources, Elsevier. 43. Journal of Renewable and Sustainable Energy, AIP. 44. Korean Journal of Chemical Engineering, Springer. 45. Materials and Manufacturing Process, Taylor & Francis. 46. Medical Engineering and Physics, Elsevier. 47. Micromachines, MDPI. 48. Powder Technology, Elsevier. 49. Precision Engineering, Elsevier. 50. Renewable Energy, Elsevier. 51. Renewable & Sustainable Energy Reviews, Elsevier 52. Resources, Conservation & Recycling, Elsevier 53. Sensors, MDPI. 54. Sustainability, MDPI. 55. Sustainable Cities and Society, Elsevier. 56. Sustainable Energy Technologies and Assessments, Elsevier. 57. Thermal Science and Engineering Progress, Elsevier. 58. Trends in Food Science and Technology, Elsevier. 59. Waste and Biomass Valorization, Springer. 60. World Electric Vehicle Journal, MDPI. RESEARCH PROJECT AND GRANT ACQUISITIONS

__________________________________________________________________________________________


1. Collaborative research, “Advanced utilization of electric vehicles for grid ancillary services”, Principle investigator, April 2017 – Mar 2019, Mitsubishi Corporation, JPY 10,500,000.

2. Collaborative research, “Biomass-based power generation in Japan”, Principle investigator, April 2018 – Mar 2019, NTT Facilities, JPY 1,000,000.

3. Collaborative research, “Analysis of hydrogen utilization in the power grid”, Co-investigator, Aug 2017 – Mar 2018, Tokyo Metropolitan College of Industrial Technology, JPY 500,000.

4. Collaborative research, “The feasibility of hydrogen utilization in the power grid”, Co-investigator, Nov 2016 – Mar 2017, Tokyo Metropolitan College of Industrial Technology, JPY 900,000.

5. Grant-in-aid for Young Scientists B (Wakate B), “Innovative energy production from algae based on exergy recovery and process integration”, ID 16K18355, Principal investigator, Apr 2016 – Mar 2019, Japan Society for the Promotion of Science (JSPS), JPY 3,900,000.

6. Commissioned research, “Effect of Biomass Blending on Combustion Behavior in Coal Fired Power Generation”, Co-investigator, Sep – Dec 2015, New Energy Foundation (NEF), JPY 442,000, Partner: Agency for the Assessment and Application of Technology (Indonesia), Invited researcher: Dwika Budianto.

7. Research donation, Principal investigator, Kawasaki Heavy Industries, Ltd., Mar 2015, JPY 800,000. 8. Commissioned research, “Frequency variation analysis in small-scale integrated solar power and diesel generator”, Co-

investigator, May 2015 – Sep 2015, Yaskawa Electric, Corp., JPY 3,133,000. 9. Commissioned research, “A study on the planning of the regional energy infrastructures”, Co-investigator, Aug 2014 –

Mar 2015, Tsushima City (Nagasaki Pref.), JPY 15,950,000. 10. Academic advice services, “Feasibility Study on the Spread and Policy of Next Generation Vehicle in Estonia and The

Spreading Possibilities in Europe, South America and Asia”, Co-investigator, Nov 2013 - Feb 2014, Mitsubishi Corp., JPY 315,000.

11. Research donation, Principal investigator, Kawasaki Heavy Industries, Ltd., Oct 2013, JPY 1,000,000. 12. Commissioned research, “Evaluation on the Impact of M-tech Labo to Smart Grid”, Co-investigator, Jul 2013 – Mar

2015, Mitsubishi Motors Corp., JPY 1,890,000. 13. Commission research, “Evaluation on Energy Distribution System in South East Asia”, Co-investigator, Apr 2013 – Mar

2014, Yanmar Co. Ltd, JPY 5,000,000. 14. Commissioned research, “Conformity Assessment on Biomass Based Distributed Power Generation in Indonesia”, Co-

investigator, Nov 2012 – Jan 2013, New Energy Foundation (NEF), JPY 516,900, Partner Agency for the Assessment and Application of Technology (Indonesia), Invited researcher: Hadi Surachman.

15. Commissioned research, “Evaluation on Energy Distribution System in South East Asia”, Co- investigator, Apr 2012 – Mar 2013, Yanmar Co. Ltd., JPY 5,000,000.

16. Commissioned research, “Research and development of battery charger integration system for next generation service station”, ID 3115105, Co- investigator, Apr 2011 – Mar 2014, New Energy Promotion Council (NEPC), JPY 55,748,430.

17. Academic advice services, “Research and development on the utilization of battery of electric vehicle”, Co-investigator, Apr 2011 – Mar 2013, Mitsubishi Corp., JPY 600,000.

18. Commissioned research, “Feasibility study on distributed power generation in South East Asia”, Co-investigator, Apr 2011 – Mar 2012, Yanmar Co. Ltd., JPY 3,000,000.

19. Commissioned research, “Research and development of an innovative biomass drying based on self-heat recuperation technology”, Co-investigator, Apr 2009 – Mar 2011, New Energy and Industrial Technology (NEDO), JPY 77,507,197.

OTHER RESEARCH PROJECT AND GRANT ACQUISITIONS 1. Collaborative research, “Parker Project” (Utilization of electric vehicles in grid services), Co-investigator, Aug 2016 –

Jul 2018, Forskel, Project No. 12410, Energinet.dk, 9,710,000 DKK. Collaboration with Denmark Technical University, NUVVE, Insero, Nissan, Frederiksberg Forsyning, FPSA group, and Mitsubishi Corporation.

__________________________________________________________________________________________


2. Collaborative research, “Study on the advanced use of renewable energy”, Coordinator, Apr 2011 – Mar 2019, Mitsubishi Corp. (Mitsubishi Collaborative Research Unit), JPY 190,000,000.

3. Collaborative research, “Research and development of integrated energy systems for building a low carbon society”, Co-investigator, Apr 2011 – Mar 2019, JX Nippon Oil & Energy Corp. (ENEOS Collaborative Research Unit), JPY 227,000,000.

4. Commissioned research, “Research on Advanced Energy Systems”, Co-investigator, April 2011 – Mar 2019, Company members of International Research Center of Advanced Energy Systems for Sustainability (AES), about 45 companies are joining, total budget about JPY 45,000,000 per year (JPY 1,000,000 per company per year).

5. Center of excellent program (COE), “Development of compound tool for micro machining”, Principal investigator, Apr 2006 – Mar 2008, Japan Society for the Promotion of Science (JSPS), JPY 1,600,000.

EXTERNAL REVIEWER 1. External examiner. PhD thesis. The University of Sydney. 2. Project proposal reviewer. Ministry of Education and Science, Kazakhstan

ACADEMIC SOCIETY MEMBERSHIP 3. The Japan Society for Precision Engineering (JSPE), 2004. 4. The Japan Institute of Energy, 2009- (No: 1010026) 5. Division of Energy Efficiency and Consumer Behavior, JIE, 2018- 6. Biomass Division, JIE, 2010-

curriculum vitae - aesセンターaes.ssr.titech.ac.jp/aziz/cv_aziz.pdf · curriculum vitae ....

Documents