cv_hoang van phuong
TRANSCRIPT
![Page 1: CV_HOANG VAN PHUONG](https://reader035.vdocuments.pub/reader035/viewer/2022080504/58e79ecf1a28abc1038b4733/html5/thumbnails/1.jpg)
Hoang Van Phuong
CURRICULUM VITAE PERSONAL DETAILS
Full Name : Hoang Van Phuong
Date of Birth : 20th
Feb 1986
Nationality : Vietnamese
Phone : +84 976 755 062
Email : [email protected]
SUMMARY OF EXPERIENCES
Six years of experiences as Instrument & Control Engineer in offshore and onshore oil & gas
projects, with international exposure:
� Experience with every stage of projects from FEED, Detail Engineering to Construction;
� Experience with preparation of engineering documents such as Specification, Data Sheet,
Material Take-Off (MTO), Index, and I/O List;
� Experience with preparation of engineering drawings such as Wiring Diagram, Loop
Diagram, Layout, and Cause & Effect Chart;
� Experience with Technical Bid Evaluation (TBE), Vendor Data review, and FAT;
� Familiar with international standards such as IEC, ISO, API, and ISA;
� Familiar with multi-culture, multi-language working environment.
Instrument Loop Check Supervisor
JGCS Consortium (Thanh Hoa, Vietnam)
JGCS Consortium consists of JGC Corporation, GS E&C, Chiyoda Corporation, SK E&C, and
Technip.
Apr 2016 – present
Nghi Son Refinery and Petrochemical Complex (a mega EPC project)
Responsibilities:
Loop Check Supervisor in charge of Technip area with more than 4,000 loops.
- Manage schedule of all loops to ensure Mechanical Completion (MC) milestone of project,
- Coordinate with Construction group and QC group to make instrument loops ready for
conducting official loop check,
- Coordinate with Client for witness and punch closing,
- Supervise all loop check activities of Subcontractor at site to make sure safety and quality,
- Coordinate with Engineering group and vendor specialists for trouble shooting.
Instrument Material Coordinator
JGCS Consortium (Thanh Hoa, Vietnam)
Oct 2015 – Mar 2016
Nghi Son Refinery and Petrochemical Complex (a mega EPC project)
Responsibilities:
- Report to Instrument Group Manager about status of instrument material such as shortage,
damage, delivery,
![Page 2: CV_HOANG VAN PHUONG](https://reader035.vdocuments.pub/reader035/viewer/2022080504/58e79ecf1a28abc1038b4733/html5/thumbnails/2.jpg)
Hoang Van Phuong
- Coordinate with Engineering group to issue top-up material to maintain construction
schedule,
- Coordinate with Construction group in checking material request from Subcontractor,
- Coordinate with QC group in material receiving inspection and issuance of Material
Exception Report,
- Control issuance of material to Subcontractor to avoid wrong issuance or double issuance.
Instrument Engineer
JGC Corporation (Yokohama, Japan)
Jul 2014 – Jul 2015
Instrument engineering in Nghi Son Refinery and Petrochemical Complex (a mega EPC
project)
Responsibilities:
- Act as Instrument Engineer in charge for On-Off Valves / Sequencing Valves and Flow
Instruments, report to Field Instrument Lead Engineer;
- Prepare Datasheet for Valves (more than 400 tags) and Flow Instruments (more than 700
tags);
- Supervise JGC Philippines and JGC Vietnam inputting data for specifications on SPI;
- Prepare Tie-in Dimension documents to Piping team;
- Evaluate Vendor’s Technical Proposal for Valves and Flow Instruments;
- Review Vendor Documents;
- Manage technical changes for Valves and Flow Instruments after PO;
- Coordinate with QC team to review Vendor’s test report before issuing Inspection Release
Certificate (IRC);
- Lead weekly meetings with Vendors to solve technical issues.
Instrument Engineer
JGC Vietnam Co. Ltd (Hanoi, Vietnam)
Dec 2013 – Jun 2014
Instrument engineering in Dung Quat Refinery Additional Sulfur Recovery Unit (FEED/EPC
Contract)
Responsibilities:
- Prepare Datasheet/ Requisition for Instrument Valves, Analyzers, and Instrument Cable;
- Do Technical Bid Evaluation (TBE) for Instrument Cable, and Modification of the existing
Power Distribution Panel (PDB) & Interface Relay Panel (IRP);
- Prepare Tie-in Description, Inspection and Test Plan (ITP) for Instrumentation
Construction Work, and Fire & Gas Detector Layout/ Cause & Effect Chart;
- Prepare Job Safety Analysis (JSA), Work Steps & Method of Statement;
- Supervise Sub-contractors pulling cables and Vendors modifying PDB/IRP.
Instrument Engineer
Petro Vietnam Engineering Consultancy JSC (HCMC, Vietnam)
Oct 2012 – Nov 2013
Instrument engineering in following projects:
� Process Bypass Line on TBVN-FPSO (Detail Engineering contract)
![Page 3: CV_HOANG VAN PHUONG](https://reader035.vdocuments.pub/reader035/viewer/2022080504/58e79ecf1a28abc1038b4733/html5/thumbnails/3.jpg)
Hoang Van Phuong
� DMDP-A Wellhead Platform (Detail Engineering contract)
� Gas Processing Plant – Nam Con Son 2 (jointly FEED contract between Petro Vietnam
Engineering and Technip Vietnam)
� Block B Omon Gas Pipeline (FEED contract)
Responsibilities:
- Prepare specification for Fiscal Metering System and specification for Modification of
Basic Process Control System (BPCS) & Shutdown System (SDS);
- Prepare Instrument Index and System I/O List;
- Prepare Material Take-off (MTO);
- Prepare Data Sheet for Instrument Valves and Field Transmitters;
- Attend HAZOP and SIL Review meeting;
- Review Vendor Documents,
- Site survey at offshore facilities such as FPSO, Wellhead Platform.
Instrument Engineer
Petro Vietnam Technical Services Mechanical & Construction (Vung Tau, Vietnam)
Mar 2010 – Sep 2012
Instrument engineering in following projects:
� HST/HSD Wellhead Platform (EPC Contract)
� Process and Utility Skids for Bien Dong 1 Project (EPC Contract)
� Bien Dong 1 Project (a mega offshore EPC project)
Responsibilities:
- Prepare Data Sheet, Requisition, and Technical Bid Evaluation (TBE) for Instrument
Valves, Field Transmitters, and Electric Heaters;
- Prepare construction engineering documents and drawings such as Wiring Diagram, Loop
Diagram, System I/O List;
- Review Vendor Documents;
- Witness Factory Acceptance Test (FAT) for Instrument Valves and Electric Heaters;
- Conduct Loop Check.
TRAINING
� 2016: Training on cable glanding by CMP and tubing connection by Hy-Lok under Nghi
Son Refinery and Petrochemical Complex Project
� 2015: Training on HSSE Management by JGC Corporation
� 2011: Training on SCADA system held by PowerEDGE Singapore
� 2011: Training on Fisher Control Valve held by Emerson Process Management
EDUCATION
� 2016: Pursuing certified Professional Engineering (PE) Control System by The National
Council of Examiners for Engineering and Surveying (NCEES) the U.S.
� 2016: Fundamentals of Engineering (FE) Electrical and Computer by The National
Council of Examiners for Engineering and Surveying (NCEES) the U.S.
![Page 4: CV_HOANG VAN PHUONG](https://reader035.vdocuments.pub/reader035/viewer/2022080504/58e79ecf1a28abc1038b4733/html5/thumbnails/4.jpg)
Hoang Van Phuong
� 2004 - 2009: Bachelor Degree of Automatic and Control Engineering, Hanoi University of
Technology, Vietnam.
IT SKILLS
� Smart Plant Instrumentation (SPI)
� Auto Cad
� Microsoft Office
LANGUAGES
� Vietnamese: Native
� Good command of English: Writing, Speaking, Listening, and Reading
![Page 5: CV_HOANG VAN PHUONG](https://reader035.vdocuments.pub/reader035/viewer/2022080504/58e79ecf1a28abc1038b4733/html5/thumbnails/5.jpg)