d e m a n d va l u e - spyder · 6131 sundance rd, blackshear, ga 31516 912-449-0033 fax:...
TRANSCRIPT
D e m a n d V a l u eVe r s a t i l e , A f f o r d a b l e , R e l i a b l e
To u g h , s o l i d b u i l t , s t r a i g h t f o r w a r d .
S e n s i b l e b o a t s f o r t h e s e r i o u s f i s h e r m a n .
2
We have been refining the skiff concept for over 16
years and we simply could not fathom why Light Tackle Flats
and Technical Poling skiffs were so expensive. So we de-
cided to build our own. Spyder is proud to offer you our
newest line of boats - the FX Series; a true Flats Boats.
These technical poling skiffs have an easy gliding
10 degree dead rise at the transom. We eliminated the hull
strakes and incorporated a mild reverse chine to minimize
hull slap while not sacrificing crisp steering performance.
The hulls are built with our proven Foam & Glass I-
Beam stringer system. This solid glass and foam construc-
tion creates an incredible strong hull that yields a very quiet
ride while shooting across the grass flats. The decks are
composite cored for stiffness, with aluminum plates sand-
wiched between fiberglass layers at key load and hardware
points.
The FX series has a molded inner liner, large insu-
lated bait and release wells, flush mount cleats and stainless
steel rub rail as standard equipment. All thruhulls and hard-
ware is 316 stainless steel for the best corrosion resistance.
Our boats are rigged by Factory Trained Technicians with
your choice of Yamaha, Suzuki or Mercury power.
And we back our boats with a 10 Year Transferable Limited
Warranty to protect your investments for years to come.
Flush Cleats & Pole Holders, Rigid SS Rub Rail
Removable Back Rest
Rear Deck Bait & Release Wells
Foam & Glass I Beam stringers
FX Console
FX Console insulated well (optional aeration)9 ft. Rod Holders under Gunwales3
FX19 Vapor
FX17 Flicker
4
Pro Flats Package shown below
(Redfish package deletes Poling Platform and flush push pole holders)
FFXX1177 FFll iicckkeerrSPECIFICATIONS
Length 17’ - 1”
Beam 77”
Transom Height 20”
Approx. Weight 890 Lbs.
Fuel Capacity 18 Gals.
Maximum H.P. 70 H.P.
Recommended H.P. 70 H.P.
Dead Rise 10o
Draft 7”
Inside Height 12”
ffeeaattuurree hhiigghhll iigghhttss
●Flush Aft Cleats
●Large Storage Well
●(Pro Flats) Poling Platform
●Windshield & Hand Rail
●Aerated Bait Well 100 Qt
●Cushion & (Opt) Back Rest
●No Feed Back Steering
●Stainless Wheel
●Aerated 100 Qt Release Well
Hydraulic Steering Standard on
Redfish & Pro Flats Package
Rub Rail w/ S.Steel Insert ●
Wide Gunwale Walkways●
Flush Push Pole Holders●
Large Casting Deck●
Anchor Locker●
Flush Bow Cleat●
Insulated Console Well●
Trolling Motor Plug●
Console Seat w/ 2 Cushions●
Console Rod Holders●
Gunwale Rod Holders●
(On Pro Flats)
5
Pro Flats Package shown below with
optional Hybrid Graphite Push Pole
FFXX1199 VVAAPPOORRSPECIFICATIONS
Length 19’ - 1”
Beam 83”
Transom Height 20”
Approx. Weight 1,020 Lbs.
Fuel Capacity 31 Gals.
Maximum H.P. 150 H.P.
Recommended H.P. 115 H.P.
Dead Rise 10o
Draft 7”
Inside Height 13”
ffeeaattuurree hhiigghhll iigghhttss
Rub Rail w/ S.Steel Insert ●
Wide Gunwale Walkways●
Flush Push Pole Holders●
Extra Large Casting Deck●
Large Well & Anchor Locker●
Insulated 100 Qt Well●
Flush Bow Cleat●
Insulated Console Well●
Trolling Motor Plug●
Console Seat w/ 2 Cushions●
Console Rod Holders●
Gunwale Rod Holders●
●Flush Aft Cleats
●Large Storage Well
●Poling Platform (Pro Flats)
●Windshield & Hand Rail
●Aerated Bait Well 100 Qt
●Cushion Seat & Back Rest
●Removable Splashwell Hatch
●Hydraulic Steering
●Stainless Wheel
●Aerated 100 Qt Release Well
6
7
8
FX19 Poling Platform is hinged to fold forward for en-
gine access. Power Pole (8ft white) shown
New Gen 2 FX17 Poling Platform and Atlas 4” Mini
Jack Plate shown
FX19 forward release well is insulated and plumbed
on Redfish and Pro Flats package
Molded pad to accept Minn Kota or MotorGuide Quick
Release Trolling Motor mounting plates
9
Pale Lady
YellowSun White
(Standard)PlatinumSea FoamIce Blue
Jet BlackMoss
GreenRed
Admiral
BlueSteel Blue
10
www.spyder-boats.com6131 Sundance Rd, Blackshear, GA 31516 912-449-0033 Fax: 912-449-0038 Email: [email protected]
Spyder Boats, a division of Composite Research, Inc. continually strives to improve and enhance our products. We reserve the right to change, discontinue or alter specifications, models, features, equipment or prices without notice or in-
curring any obligations. Some photographs in this brochure may feature boats with optional installed equipment. Some options may conflict with other options. Specifications and measurements are approximate and subject to variances.
All Spyder Boats are built to meet or exceed U.S. Coast Guard requirements at time of manufacturer. Sundance, Sea Born and Spyder, FX Series, Flicker, and Vapor are trademarks of Composite Research, Inc. All Rights Reserved. Re-
vised September 1, 2013. Confirm all specification and options with your Dealer prior to purchase.
Authorized Dealer
FX17 Pro Flats
COMPOSITE RESEARCH, INC.