datasheet motor pm55l 048 hpg9
TRANSCRIPT
Copyright 2004, Minebea Co., Ltd.
ApplicationsApplications
Torque CharacteristicsTorque Characteristics
DimensionsDimensions
Reference CharacteristicsReference Characteristics
PM MotorPM Type
If you would like to know this Dimensions(D,S,W,θ), Please see Standerd Dimensions in our Home Page.
eMINEBEA.COMMinebea Motor Manufactur ing Corporat ion
PM55L-04848(7.5°/Step)
2-2 PHASE
Ferrite plastic magnet (MSPL)Polar anisotropy ferrite sintered magnet (MS50)
Nd-Fe-B bonded magnet (MS70)100M[Ω] MIN
AC 500[V] 1[min]CLASS E
-10[°C] ~ 50[°C]-30[°C] ~ 80[°C]
20[%] RH ~ 90[%] RH
Motor SizeNumber of Steps per Rotation
Drive MethodDrive CircuitDrive VoltageCurrent/Phase
Coil Resistance/PhaseDrive IC
Magnet Material
Insulation ResistanceDielectric StrengthClass of InsulationOperating Temp.Storage Temp.
Operating Hum.
UNIPOLAR CONST. VOLT.
24[V]
30[Ω]2SC3346
BIPOLAR CHOPPER
24[V]800[mA]5.5[Ω]
UDN2916B-V
OA Equipment : Printers / Scanners
Industrial equipment : Flow control valves
Toys : Slot machines
Home automation appliances : Sewing machines
PM55L-048
PM55L-048 UNI-CONST. V (at 24[V],30[Ω]) PM55L-048 BI-CHOPPER (at 24[V],5.5[Ω],800[mA])
0
500
1000
1500
2000
2500
0 100 200 300 400 500 600Frequency [PPS]
Torq
ue [X
10-4
N.m
]
MSPL Pull-outMSPL Pull-inMS50 Pull-outMS50 Pull-inMS70 Pull-outMS70 Pull-in
0
300
600
900
1200
1500
1800
0 200 400 600 800 1000 1200Frequency [PPS]
Torq
ue [X
10-4
N.m
]
MSPL Pull-outMSPL Pull-inMS50 Pull-outMS50 Pull-inMS70 Pull-outMS70 Pull-in
φD
φ11.
130 -0
.10 -0
.01
S±0.5
φ55
1MAX25.7MAXP±0.2
2.3 1.6
12.7
15.8
W±10
5.5MAX2-R5
2-φH
θ±3°
These torque values are reference only. Heat radiation conditions and temperature rise effect by duty are different on each equipment, therefore please select motors after considering the heat conditions in the actual equipment.