dell emc forum 2016 - moderni tallennusjärjestelmä alentaa it:n kulurakennetta
TRANSCRIPT
Moderni tallennusjärjestelmä alentaa IT:n kulurakennetta
Marko Kortetmäki
Markku Suistola
Dell EMC Storage Specialist team
3
SC Series: Accelerate your business outcomes
Lower costswith efficiency
Prosperthrough change
Simplify great performance
• All flash optimised
• Upto 400 000 IOPS with low latency*
• 99.999% availability, iron-clad data protection**
• Fully-virtualized architecture
• Self-optimizing automation
• Thin everything
• Always available, agile
• Easy modular expansion
• End-to-end management
* Internal test performed by Dell in September 2015 with Storage Center 6.7 on dual SC9000 controllers using IOmeter with 100% random reads and 8k sector transfer size. Actual performance will vary based on configuration, usage and manufacturing variability.
** Results for SC8000, based on June 2015 internal Dell testing with actual MTBF calculated from a run time total of 67.3 million+ hours (accumulated by 16123 systems). Run time and availability impacting failures for a 6 month period from 8/2014 thru 1/2015. Estimated weighted average MTTR of 8.16 hours for 12 hour part SLA. Actual performance will vary based on configuration, usage and manufacturing variability. A minimum of a 4 hour support option is required, other support options are available.
4
SC Series: Intelligent storage foundation
SMB EntryRemote office, departmental
Value Tiers
* Requires 4-port 12Gb SAS card, otherwise maximum 960 drive.
SC9000
“Flagship SC array for
larger environments”
Best throughput
Best performance
1024per array*
Small tomid-size
deployments in companies
of any size
SC7000
“More capacity,
greater flexibility”
Modular I/O(front and back)
12Gb SAS back-end expansion
500drives
per array
Multi-tier optimization
(including Flash-optimization)
Auto-tier, data reduction, federation, disaster recovery, SEDs
Advanced features
SC4000
“Big company advantage
for midsize deployments”
192drives
per array
Single-tier optimization
SCv2000
“Intelligent entry-
level solutions”
Virtualized architecture, self-optimizing RAID tiering, “thin” methods, QoS, VVols
End-to-end management, broad 3rd-party integrations, flash support
168 drives
5
Overcome current and future storage obstacles
Dell Storage SC7000 Series:
• All Flash and Hybrid storage array
• Future proofing through
flexibility and power
• Simplified managementand federation
6
SC7020: New form factor for SC Series
Up to 500 drives
6 exp slots
SCOS 7.1
2PB Usable capacity
300%Reduction in rack space²
IOPs¹
290KUp to
302.5” hard drives
12GB SAS back end
Unified management —manage FluidFS and Storage Center OS via Dell Storage Manager
Efficiency — Less hardware to
monitor and manage, multi-protocol
Advanced features — full suite of
SC and FS offerings available to the mid-
market
Combining the best of
Dell IP in one array
¹Based on Dell Internal test results in June 2016 on one SC7020 with SCOS 7.1 using Diskspd. 30 SSDs, 100% random reads with 8K sector transfer size. Actual performance will vary based on configuration, usage and manufacturing variability²Based on Dell internal calculation using the rack space required for a FS8600, two SC9000 and two SC420 configuration vs the single SC7020.
7
SC7020 front and rear view
3U
30 drive slots
3 PCIe slots, per controller
On-board Mezz card, 4x 10Gb iSCSI, SFP+ or RJ45, per controller
Two 12Gb SAS back-end ports, per controller
Dual controllers
Micro USB /
Serial DebugUSB 1Gb MGMT LAN
8
What are your storage goals?
• 3U Form factor, SC7000 array
– Achieve over 290K block IOPs³
– Achieve over 245K block IOPs with
less than 1ms of latency ⁴
– Up to 1063 MB/s of write throughput¹
– Up to 2174 MBs of read throughput¹
¹ Based on Dell internal testing in July 2016 using an internally developed tool, 30 SSDs, 100% sequential writes with SCOS 7.1 and FluidFS v5. Actual results may vary based on configuration, usage and manufacturing variability.²Based on Dell Internal test results in June 2016 on one SC7020 with SCOS 7.1 using Diskspd. 30 SSDs, 70/30 read/write mix, with 8K sector transfer size. Actual performance will vary based on configuration, usage ³Based on Dell internal testing in June 2016 using SpecSFS benchmarking on an SC7020 with 30 SSDs, SCOS 7.1 and FluidFS v5. Actual performance will vary based on configuration, usage and manufacturing variability.
9
Flash-optimized arrays Multiple SSD tiers provide highest performance at lowest cost
Performance
Cost savings
Dell SC Series combines SSD types to give you the performance of an “all-WI” array…
ALL incoming writes go to WI SSDs
…for the price of an “all-RI” array.
RI used for reads only(no speed decrease)
Automatic progression to RI drives
Fast writes
Fast reads
Longer drive life(RI drives get fewer writes)
Tier 1
Tier 2
Other arrays force you to choose a single SSD type
$$$ Higher cost
Fast writes
Fast reads
Long lifespan
Write-intensive SSD
$ Lower cost
Slower writes
Fast reads
Shorter lifespan
Read-intensive SSD
OR
10
Now 3 classes of drives in SC portfolio
Write-intensive
• 200 GB
• 400 GB
• 800 GB
• 1.6 TB
• 3.2 TB**
• 480 GB
• 960 GB
• 1.92 TB
• 3.84 TB
• 7.68 TB**
• 15.4 TB**
Read-intensive
• 300 GB (15K)
• 600 GB (15K)
• 900 GB (10K)
• 1.2 TB (10K)
• 1.8 TB (10K)
• 2 TB (7K)
• 4 TB (7K)
• 6 TB (7K)
• 8 TB (7K)
• 10 TB (7K)
SAS
SSDs (Solid-state drives) HDDs
**Available H2 2016
11
Climb to new heights with future ready features
LIVE Features include:
• Live migrate - Federation
• Live volume – Auto Failover now in Microsoft Platforms
• Live Dedupe and compression
• A Great deal other enchancement
• Vvols
• QoS
• Cross platform replication
• NAS (FluidFS 8600 applicance)• Global Namespace Aggregation
• Integration with Quest Change Auditor
• PowerShell & REST system management API
• Multitenancy (post RTS**)
NAS features and overviewFluidFS 8600 Scale-out NAS appliance
13
Native NAS enabled as your environment changes
Add NAS functionality at any time
Scale-Out architecture offer Scale as you grow
Block and File management with Dell Storage Manager (REST API)
4PB NAS
volumes that
span all availab-
le hardware
20PB in a global
namespace
across discrete
NAS systems
Data protection
using efficient
replication and
NDMP backup
14
FluidFS global namespace
• Single namespace across multiple FS8600 systems or any NAS appliance supporting SMB
2/3 or NFS v4
• Combine benefits of both scale-out file system and global namespace
– A single global namespace simplifies data access and management across heterogeneous NAS
devices and 10s of PBs of data
Customer benefit
Simplify managing large datasets and multiple
systems
Global Namespace
FS8600 Cluster
Grow up to 4PB file system
FluidFS Main Cluster
\\cluster1\main
\\cluster1\main provides a global namespace across discrete and heterogeneous NAS systems
NetApp-Archive
NetApp
\\cluster1\main\Archive
Isilon-Research
Grow up to PBs scale-out file system
ISILON
\\cluster1\main\Research
But, Why is this all important?
Management and software features
18
SCOS 7.1 — Game-changing innovation
Intelligent Deduplication0.45€/GB for flash, 0.10€/GB for HDD
QoSMeet cloud SLAs, prioritize workloads
VVOLsVMware scalability, efficiency and control
NEW — SCOS 7.1 Enhancements
More efficiency, greater control
Federation – Live MigrateSeamless data mobility among arrays
NEW — Dell Storage Manager
One Dell Storage Ecosystem= Investment Protection
FS Series
DSM
PS Series
SC Series
19
SC Series leads in storage efficiency
Thin Provisioning
Automatically recover free space. On average, customers reduce storage by 2.3x
Thin RAIDDynamic RAID provisioning, no need to pre-allocate. Use the performance of ALL the drives in your array for any RAID level, anytime
RAID TieringWrite data at RAID 10, then automatically convert to RAID 5/6 on the same drives. Performance of RAID 10 @ cost of RAID 5/6
Thin WritesPattern recognition reduces writes on thick provisioned volumes and VMs
Thin ClonesCreate clones from replays with no additional copies. Perfect for cloning Virtual servers or virtual desktops
CompressionAn average of ~60% and up to 93% in MS environments of data reduction on data that is compressed
DeduplicationData reduction on an average of 4:1 and up to 10:1 for VMWare environments
20
RAID tieringAdditional optimization within a tier
Other arrays force TOUGH CHOICES: speed or capacity?
All drives must be pre-allocated for a single RAID level
OR
AllRAID 5/6
Fewer drives,but SLOW
writes
AllRAID 10
Fast writes,
but requires MANY drives
($$$)
Dell SC Series gives you MORE performance with FEWER drives
Multiple RAID levels per drive
Dynamic provisioning across drive pool –no need to pre-allocate RAID
RAIDauto-expands and contracts
across all drives
10
5/6
RAID 10 “write layer”
RAID 5/6 used only for reads(same speed)
Speed AND efficient capacity utilization
21
Data progression auto-tiering with FLASH
Protect your FLASH
Storage against wear-out:
• Direct ALL incoming writes
to Tier 1 drives at fastest
RAID levels
• Move inactive data to
lower-cost drives, space-
efficient RAID levels
• Separate reads from writesOptimise most expensive drives –
maximize the advantage
Read-intensive
SSD or
15K SAS
7.2K SAS
Write-intensive
SSD
VERY SMALL page size
enables data movement
Tier 1
Tier 2
Tier 3
22
Intelligent Deduplication – NO compromises!
Automated efficiency methods work
together to maximize your savings
Platform efficiency
Data reduction
RAID tiering
Auto-tiering
Thin methods
Intelligent Deduplication
Intelligent Compression
Lowerscost of
performance
Lowers cost of
capacity
SC Series now adds the most
comprehensive continuous data reduction
Patented, designed for performance:
Targets the “right data” within each volume
10:1 reduction, full-speed writes
Better cache utilization
Cost-reduce ANY array
SSD tiers – All FLASH now under 0.45€/GB
HDD tiers (Exclusive dedupe advantage!*)
Hybrid solutions combine both advantages!
* SC Series is the only tiered architecture combining dedupe and compression on HDDs and SSDs.
23
Introducing Dell storage manager (DSM)Elevate your storage viewpoint with global control of Dell storage products
Note: DSM is now the sole UI for all SC platforms. SC GUI ceases to exist for all platforms (in SC7.0 +).
Dell Storage Manager
New PS mgmt,
PS/SC replication
Includes all
Enterprise
Manager capabilities
VMware/Oracle
Integrations
Windows/Linux
Integrations
PS, EQL
groups
SC,
CML
arrays
FS NAS
gateway
24
DemoTilapäinen näkemiin PowerPointille…
Dell Storage Manager
SC – PS – FS -hallinta
Uusi Web GUI – HTML5
Data Reduction
Dedup & Compression
RAID Tiering
Thin everything
25
Old way
Datastore treated as
one volume
Array unaware of VMs – locks each into identical services
VMVM VMVM
VFMSDatastore
• Storage profile• Snapshots• Dedupe/Comp• Encryption• QoS
VVols support Apply SC services to individual VMs: improve workload efficiency/performance
With VVols
VMVM VMVM
C:D:E:
VM admin uses familiar VSphere tools to choose SC Series policies per VM
Each workload gets precisely the services it needs
No trade-offs, compromises
Easy, quick modifications, globally or per VM
VM-aware array
VVol VVol VVol
VVol VVol VVol
Storage admin simplydefines menu of policies available to VM admin
Applies policies per VVol
Servers
Storage
26
Federated cluster
Multi-array federation need? use LIVE technology
Volume Advisor
Monitors cluster, recommends ideal load balancing
Live Migrate
Move volumes anywhere without remapping hosts
* Available on SC9000, SC8000 and SC4020 arrays. Federation may include like or unlike models.
1. Volume Advisor sends alert
2. Start Live Migrate wizard, accept recommendations
3. Click “complete migration”
Rebalance your data center arrays in minutes!
* Standard SC Series feature
100% storage-side control — no need to involve server/app teams
Offer a consistent, highly-available storage service for your IT clients
LUN
Data movement within federation does NOT
affect workloads
27
“Storage hypervisor” needs? use LIVE technology
Virtualized LUN mappings let you make storage changes without interrupting users or workloads.
Data migration
Move volumes seamlessly between arrays
LUN
No need to re-map servers
Disaster recovery
Auto-failover to 100% synchronized backup volumes
Always in sync: RTO/RPO = 0
LUNLUN
BackupPrimary
Federated systems
Easy optimization of multiple arrays under unified management
Volume Advisor suggests best LUN locations
Balance workloads on demand
28
Business continuity needs? use LIVE technologyNow available for VMware and Hyper-V environments
No administrative intervention required for fail-over or restore
Re-syncs arrays automatically when downed site comes back online (copies changes only)
Built-in SC Series solution – no extra HW/SW required
3rd site replication support
Failed VMs restored on new physical servers without losing their storage mappings.
Stretch Cluster support
Synchronized LUNs on separate arrays are presented as multiple paths to same volume (MPIO)
Live Volume
Read / write on
either path
Site 1 Site 2
LUNLUN
Single LUN
100% Sync
ZERO workload downtime during unplanned outages and disasters
Auto-failover, auto-restore
RTO = 0RPO = 0
29
DemoTilapäinen näkemiin PowerPointille…
Dell Storage Manager
SC – PS – FS -hallinta
Uusi Web GUI – HTML5
Data Reduction
Dedup & Compression
RAID Tiering
Thin everything
Disaster Recovery
Sync- & Async replikointi
Live Volume
Strech Cluster (vMSC)
Federation
Volume Advisor
Live Migration
Kiitos!
QoS
IOPS & MB/s capping
Priorisointi
Dell Services
31
Critical systems need more than
break-fix support, they need proactive
and preventative measures to get
ahead of problems before they
happen.
Dell ProSupport Plus powered by
Copilot combines expertise and
technology to proactively improve the
performance and stability of your Dell
Storage SC7020, allowing you to focus
on your strategic goals.
ProSupport Plus powered by Copilot Overview
32
Overview
Optimize provides in-depth, predictive
analysis and consultative guidance to
keep your Dell Storage SC Series
arrays optimized and configured for
year-round peak performance.
Get highly skilled expertise from a
dedicated Dell Enterprise Systems
Analyst who proactively monitors
storage health and identifies areas for
improvement.
Dell Optimize for Dell Storage SC Series
DPACKOikea mitoitus IT-projektille
Aina oikea mitoitus! DPACK 2.0
• Konesalihankkeen mitoitus faktatietoon pohjautuen
• Agentiton suorituskyvyn mittaus halutulta aikaväliltä
• Mittauksen tekeminen on helppoa, ja sen voi tehdä asiakas halutessaan itse
• mittausdatan analysoinnin tekee Dellin tai jälleenmyyjän asiantuntija
• Mittauksen tuloksena todellinen suorituskyvyn tarve per palvelin/työryhmä/konesali
– Networking
– CPU
– Memory
– Storage IO
– Storage Capacity
UUTTA!!! DPACK-F = file
• Tallennusjärjestelmän mitoitus faktatietoon pohjautuen
• Mittaus kertoo datasta– File types by extension
– Quantity of file types
– Capacity of file types
– File Creation date
– Last Access date
– Last modify date
– De-duplication estimates
– Compression approximations
• DPACK-F:n avulla– Saavutetaan ymmärrys deduplikoinnin ja kompression
vaikutuksesta palvelimen dataan
– Kertoo kuinka ”vanhaa” data on auttaa mitoittamaan levyjärjestelmän tierauksen oikein SSD vs. HDD
• DPACK-F:n vaikutus palvelimen suorituskykyyn analysoinnin aikana vastaa virus-skanneria
36
“Technology has always been about enabling human potential.”– Michael Dell