design in civil engineering ii -...

1
151418675 Design in civil engineering II , Prof. Dr. Ahmet TOPÇU Academic cycle: Undergraduate Year of Study: 4 th year of study Prerequisites: Structural Analysis I, Reinforced Concrete I and II Language: Turkish Local Credits: 3 ECTS credits: 6 Weekly lectures/practice/laboratory: 3-0-0 Duration: 1 semester Semester: Spring Examination: Mid-term project and final project, Written Assessment: Mid-term project : 50%, final project: 50% Description: The main aim of the course is to prepare reinforced concrete project of a simple house. Content of the course is as follows: Starting from a given duplex house, the student has to choose a structural system for it, calculate and design the slabs, frames and foundation. Analysis and design will be made partially by hand and fully by computers. Learning objectives: By the end of this module students will be able to: 1. Plan, analyze and design reinforced concrete buildings. 2. Occupational using of computer. Reading List: 1. Ersoy, U., Özcebe, G. (2011). Betonarme , Evrim yayınevi, İstanbul. 2. Ersoy, U., Özcebe, G. , Tankut, T. (2010). Reinforced Concrete, ODTÜ, Ankara. 3. Ersoy, U. (2011). Betonarme 2, Döşeme ve Temeller, Evrim Yayınevi, İstanbul. 4. Celep, Z., (2013). Betonarme Yapılar, İTÜ, İstanbul. 5. Doğangün, A. (2013). Betonarme Yapıların Hesap ve Tasarımı, Birsen Yayınevi, İstanbul. 6. Aydın, M. R., Akgün, Ö. R., Topçu, A. (2002). Betonarme Kolon Tabloları, Eskişehir. 7. Bakır, E., Bakır, A., R. (1986). Kolon ve Perde Donatı Tabloları, (Taşıma Gücü Yöntemi), Ankara. 8. Neufert , E. (2015) Yapı Tasarımı 9. Atımtay, E. (2001). Betonarme Sistemlerin Tasarımı, Cilt I, ve II, ODTÜ, Ankara. 10. Atımtay, E. (2000). Açıklamalar ve Örneklerle Afet Bölgelerinde Yapılacak Yapılar Hakkında Yönetmelik, Cilt I, ve II, ODTÜ, Ankara. 11. TS 498 (1997). Yapı Elemanlarının Boyutlandırılmasında Alınacak Yüklerin Hesap Değerleri, TSE. 12. TS ISO 9194 (1997). Yapıların Projelendirilme Esasları-Taşıyıcı Olan ve Olmayan Elemanlar- Depolanmış malzemeler-Yoğunluk, TSE. 13. TS 500 (2000). Betonarme Yapıların Hesap ve Yapım Kuralları, Türk Standardları Enstitüsü, 2000. 14. Deprem Bölgelerinde Yapılacak Binalar Hakkında Yönetmelik, Bayındırlık Bakanlığı, 2007. 15. Türkiye Deprem Bölgeleri Haritası, Yerleşim Birimleri ve Deprem Bölgeleri, Bayındırlık Bakanlığı, 1996

Upload: phungkhanh

Post on 08-Feb-2018

235 views

Category:

Documents


9 download

TRANSCRIPT

Page 1: Design in civil engineering II - mmf2.ogu.edu.trmmf2.ogu.edu.tr/atopcu/index_dosyalar/Dersler/İnşaat... · Celep, Z., (2013). Betonarme Yapılar, İTÜ, ... TS 500 (2000). Betonarme

151418675 Design in civil engineering II , Prof. Dr. Ahmet TOPÇU

Academic cycle: Undergraduate

Year of Study: 4th year of study

Prerequisites: Structural Analysis I, Reinforced Concrete I and II

Language: Turkish

Local Credits: 3

ECTS credits: 6

Weekly lectures/practice/laboratory: 3-0-0

Duration: 1 semester

Semester: Spring

Examination: Mid-term project and final project, Written

Assessment: Mid-term project : 50%, final project: 50%

Description: The main aim of the course is to prepare reinforced concrete project of a simple house. Content of the course is as follows: Starting from a given duplex house, the student has to choose a structural system for it, calculate and design the slabs, frames and foundation. Analysis and design will be made partially by hand and fully by computers. Learning objectives: By the end of this module students will be able to:

1. Plan, analyze and design reinforced concrete buildings. 2. Occupational using of computer.

Reading List: 1. Ersoy, U., Özcebe, G. (2011). Betonarme , Evrim yayınevi, İstanbul. 2. Ersoy, U., Özcebe, G. , Tankut, T. (2010). Reinforced Concrete, ODTÜ, Ankara. 3. Ersoy, U. (2011). Betonarme 2, Döşeme ve Temeller, Evrim Yayınevi, İstanbul. 4. Celep, Z., (2013). Betonarme Yapılar, İTÜ, İstanbul. 5. Doğangün, A. (2013). Betonarme Yapıların Hesap ve Tasarımı, Birsen Yayınevi, İstanbul. 6. Aydın, M. R., Akgün, Ö. R., Topçu, A. (2002). Betonarme Kolon Tabloları, Eskişehir. 7. Bakır, E., Bakır, A., R. (1986) . Kolon ve Perde Donatı Tabloları, (Taşıma Gücü Yöntemi), Ankara. 8. Neufert , E. (2015) Yapı Tasarımı 9. Atımtay, E. (2001). Betonarme Sistemlerin Tasarımı, Cilt I, ve II, ODTÜ, Ankara. 10. Atımtay, E. (2000). Açıklamalar ve Örneklerle Afet Bölgelerinde Yapılacak Yapılar Hakkında

Yönetmelik, Cilt I, ve II, ODTÜ, Ankara. 11. TS 498 (1997). Yapı Elemanlarının Boyutlandırılmasında Alınacak Yüklerin Hesap Değerleri, TSE. 12. TS ISO 9194 (1997). Yapıların Projelendirilme Esasları-Taşıyıcı Olan ve Olmayan Elemanlar-

Depolanmış malzemeler-Yoğunluk, TSE. 13. TS 500 (2000). Betonarme Yapıların Hesap ve Yapım Kuralları, Türk Standardları Enstitüsü, 2000. 14. Deprem Bölgelerinde Yapılacak Binalar Hakkında Yönetmelik, Bayındırlık Bakanlığı, 2007. 15. Türkiye Deprem Bölgeleri Haritası, Yerleşim Birimleri ve Deprem Bölgeleri, Bayındırlık Bakanlığı, 1996