Download - Document67
-
N Products Tests - Standards
1 11 (F-QM-003/Rev 00/2012)
001
Air conditionners
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Safety requirements
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
IEC 60335-2-40
SASO 2007
SASO 2663
SASO 2763
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
2 11 (F-QM-003/Rev 00/2012)
002
Vacuum cleaners, cleaning appliances
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
GSO IEC 60335-2-54
IEC 60335-2-10
IEC 60335-2-2
SASO 1233
SASO 2135
SASO IEC 60335-2-67
SASO IEC 60335-2-68
SASO IEC 60335-2-69
SASO IEC 60335-2-79
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
3 11 (F-QM-003/Rev 00/2012)
003
Refrigerating appliances
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Dimensions, volumes and weights measurement
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
IEC 60335-2-24
SASO 1978
SASO 2664
SASO IEC 60335-2-89
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
1 11 (F-QM-003/Rev 00/2012)
004
Washing machines,dryers, dishwashers
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Dimensions, volumes and weights measurement
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
Visual inspection
GSO IEC 60335-2-5
GSO IEC 60335-2-58
GSO IEC 60335-2-62
GSO IEC 60335-2-7
SASO 1602
SASO 1977
SASO 2025
SASO 2692
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
5 11 (F-QM-003/Rev 00/2012)
005
Irons, ironers
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
GSO IEC 60335-2-3
GSO IEC 60335-2-44
GSO IEC 60335-2-85
SASO 2603
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
6 11 (F-QM-003/Rev 00/2012)
006
Fans,range hood
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
GSO IEC 60335-2-99
IEC 60335-2-31
IEC 60335-2-80
SASO 2027
SASO 2031
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
7 11 (F-QM-003/Rev 00/2012)
007
Room heater
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
GSO IEC 335-2-43
GSO IEC 335-2-61
GSO IEC 335-2-66
IEC 60335-2-30
SASO 1599
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
8 11 (F-QM-003/Rev 00/2012)
008
Hairdryer, body , hair and skin care
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
GSO IEC 60335-2-27
GSO IEC 60335-2-52
IEC 60335-2-23
SASO 2604
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
9 11 (F-QM-003/Rev 00/2012)
009
Water heater
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Endurance, aging and service output
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
GSO 1858
GSO 1859
SASO 1698
GSO IEC 60335-2-21
IEC 60335-2-35
SASO 1603
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
11 11 (F-QM-003/Rev 00/2012)
010
Desert cooler,humidifier,air
cleaning
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Normal operation
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
SASO 1922
SASO 2030
SASO 2033
SASO 36
SASO 35
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
11 11 (F-QM-003/Rev 00/2012)
011
Stationary cooking ranges and ovens,warmers
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
GSO IEC 60335-2-49
SASO 1817
SASO 2005
SASO 2370
GSO IEC 60335-2-102
SASO IEC 60335-2-36
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
12 11 (F-QM-003/Rev 00/2012)
012
Portable Cooking Appliances , commercial
grills
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
GSO 60335-2-48
GSO IEC 60335-2-38
GSO IEC 60335-2-78
SASO 1600
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
13 11 (F-QM-003/Rev 00/2012)
013
Shavers, Hair Clippers
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
SASO 1604
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
11 11 (F-QM-003/Rev 00/2012)
014
Sewing machine
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
SASO 1348
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
15 11 (F-QM-003/Rev 00/2012)
015 Insect killer
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
SASO 1820
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
16 11 (F-QM-003/Rev 00/2012)
016
Portable heating tools
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
GSO IEC 60335-2-17
GSO IEC 60335-2-81
GSO IEC 60335-2-96
SASO 2029
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
17 11 (F-QM-003/Rev 00/2012)
017
Kitchen machine
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
GSO 60 335-2-64
SASO 1601
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
18 11 (F-QM-003/Rev 00/2012)
018
Boilers,appliances for boiling
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
GSO IEC 60335-2-50
SASO 1818
SASO 2606
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
19 11 (F-QM-003/Rev 00/2012)
019 ()
Microwave oven
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
SASO 1448
SASO 2032
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
21 11 (F-QM-003/Rev 00/2012)
020 Sauna appliances
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
SASO 2371
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
21 11 (F-QM-003/Rev 00/2012)
021
Medical appliances
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
SASO IEC 60601-1
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
22 11 (F-QM-003/Rev 00/2012)
022
Massage appliance
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
SASO 1976
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
23 11 (F-QM-003/Rev 00/2012)
023
General appliances with transformer or motor
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Dimensions, volumes and weights measurement
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
GSO IEC 60335-2-104
SASO IEC 60204-32
SASO IEC 60204-31
SASO IEC 60204-1
SASO IEC 60079-7
SASO IEC 60079-0
SASO 2026
SASO 1062
IEC 60204-32
IEC 60204-31
IEC 60079-7
IEC 60079-0
GSO IEC 60335-2-87
GSO IEC 60335-2-86
GSO IEC 60335-2-84
GSO IEC 60335-2-82
GSO IEC 60335-2-76
GSO IEC 60335-2-72
GSO IEC 60335-2-70
EN ISO 13857
EN ISO 12100
EN 60204-1
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
21 11 (F-QM-003/Rev 00/2012)
024 General appliances with
heating element
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
GSO IEC 60335-2-101
GSO IEC 60335-2-102
GSO IEC 60335-2-71
GSO IEC 60335-2-73
GSO IEC 60335-2-74
GSO IEC 60335-2-83
SASO 1062
UL 1030
SASO 2606
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
25 11 (F-QM-003/Rev 00/2012)
027 Clocks
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
SASO 1819
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
26 11 (F-QM-003/Rev 00/2012)
028
Deep Fryers
Abnormal operation
Classification
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
GSO IEC 60335-2-39
GSO IEC 60335-2-47
SASO 1921
SASO 2372
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
27 11 (F-QM-003/Rev 00/2012)
030
Garden lawnmowers and similaire
Abnormal operation
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
Transient overvoltages
GSO IEC 60335-2-100
GSO IEC 60335-2-77
GSO IEC 60335-2-91
GSO IEC 60335-2-92
GSO IEC 60335-2-94
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
28 11 (F-QM-003/Rev 00/2012)
033
CD/DVD/K7 video players
& recorders
Abnormal operation
Clearances, creepage distances and solid insulation
Components and materials
Heating and protection against temperature rise
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Resistance to heat, fire and tracking
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
SASO IEC 60065
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
29 11 (F-QM-003/Rev 00/2012)
034
Speakers, amplifiers, intercom
Abnormal operation
Clearances, creepage distances and solid insulation
Components and materials
Heating and protection against temperature rise
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Resistance to heat, fire and tracking
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
SASO IEC 60065
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
31 11 (F-QM-003/Rev 00/2012)
035
() Receivers
Abnormal operation
Clearances, creepage distances and solid insulation
Components and materials
Heating and protection against temperature rise
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Resistance to heat, fire and tracking
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
SASO IEC 60065
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
31 11 (F-QM-003/Rev 00/2012)
036
Video cameras
Abnormal operation
Clearances, creepage distances and solid insulation
Components and materials
Heating and protection against temperature rise
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Resistance to heat, fire and tracking
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
SASO IEC 60065
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
32 11 (F-QM-003/Rev 00/2012)
037
Video games
Abnormal operation
Clearances, creepage distances and solid insulation
Components and materials
Heating and protection against temperature rise
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Resistance to heat, fire and tracking
Screws and connections
Stability and mechanical hazards
Supply connection and external flexible cords
Terminals
SASO IEC 60065
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
33 11 (F-QM-003/Rev 00/2012)
038
Wired/Wireless phone sets, mobile phones, telecommunication
equipment
Abnormal operation
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Mechanical tests
Protection against electric shock
Provisions for earthing
Resistance to heat, fire and tracking
Safety requirements
Screws and connections
Stability and mechanical hazards
IEC 60950
SASO 2551
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
31 11 (F-QM-003/Rev 00/2012)
039
Fax machines, scanners, printers, projectors &
similar
Abnormal operation
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Mechanical tests
Protection against electric shock
Provisions for earthing
Resistance to heat, fire and tracking
Safety requirements
Screws and connections
Stability and mechanical hazards
IEC 60950
SASO 2551
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
35 11 (F-QM-003/Rev 00/2012)
040
Computers & accessories
Abnormal operation
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Mechanical tests
Protection against electric shock
Provisions for earthing
Resistance to heat, fire and tracking
Safety requirements
Screws and connections
Stability and mechanical hazards
IEC 60950
SASO 2551
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
36 11 (F-QM-003/Rev 00/2012)
041
Copiers, office appliances
and money machines
Abnormal operation
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Mechanical tests
Protection against electric shock
Provisions for earthing
Resistance to heat, fire and tracking
Safety requirements
Screws and connections
Stability and mechanical hazards
IEC 60950
SASO 2551
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
37 11 (F-QM-003/Rev 00/2012)
042
Measuring and controlling equipment
Components and materials
Degrees of protection provided by enclosures
Heating and protection against temperature rise
Marking and instructions
Mechanical tests
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Resistance to heat, fire and tracking
Safety requirements
Stability and mechanical hazards
IEC 61010-1
SASO 2416
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
38 11 (F-QM-003/Rev 00/2012)
043
Uninterruptible power systems (UPS)
Abnormal operation
Clearances, creepage distances and solid insulation
Design, construction, composition
Heating and protection against temperature rise
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Protection against electric shock
Provisions for earthing
Resistance to heat, fire and tracking
Safety requirements
Screws and connections
Stability and mechanical hazards
Terminals
GSO IEC 62040-1
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
39 11 (F-QM-003/Rev 00/2012)
067
Plugs, socket outlets, cord extension sets and similar
Abnormal operation
Breaking and making capabilities
Clearances, creepage distances and solid insulation
Degrees of protection provided by enclosures
Design, construction, composition
Dimensions, volumes and weights measurement
Electrical properties : voltage, energy, resistance, impedance, capacity and capacitance
Electrical resistance, resistivity and conductivity
Endurance, aging and service output
Heating and protection against temperature rise
Insulation, dielectric, filler, sheath and enclosures characteristics
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Normal operation
Plugs and sockets
Protection against electric shock
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Terminals
GSO IEC 60884-1
GSO IEC 60884-2-1
GSO IEC 60884-2-2
GSO IEC 60884-2-3
GSO IEC 60884-2-4
GSO IEC 60884-2-6
GSO IEC 60884-2-7
IEC 60884-1
IEC 60884-2-1
IEC 60884-2-2
IEC 60884-2-3
IEC 60884-2-4
IEC 60884-2-6
IEC 60884-2-7
SASO 2203
SASO 2204
SASO 2815
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
11 11 (F-QM-003/Rev 00/2012)
077
Adaptor
Abnormal operation
Breaking and making capabilities
Clearances, creepage distances and solid insulation
Degrees of protection provided by enclosures
Design, construction, composition
Dimensions, volumes and weights measurement
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Normal operation
Plugs and sockets
Protection against electric shock
Provisions for earthing
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Screws and connections
Terminals
GSO IEC 60884-2-5
IEC 60884-2-5
BS 1363-3
* Only IPX3, IPX4, IPX7 tests for protection against water
** Humidity chamber test capacity is W 87 cm X D 73 cm X H 153 cm
-
N Products Tests - Standards
11 11 (F-QM-003/Rev 00/2012)
102
(
)... Electric tools
Abnormal operation
Clearances, creepage distances and solid insulation
Components and materials
Design, construction, composition
Endurance, aging and service output
Evironmental stress and moisture resistance
Heating and protection against temperature rise
Internal and external wiring
Leakage current, electric strength and insulation resistance
Marking and instructions
Mechanical strength
Power input and current
Protection against electric shock
Protection against radiation, toxicity, emitted gases and similar hazards
Provisions for earthing
Radio and television interference suppression
Resistance to heat, fire and tracking
Resistance to rusting and corrosion
Safety requirements
Screws and connections
Stability and mechanical hazards
Starting and operating characteristics
Supply connection and external flexible cords
Terminals
GSO IEC 60745-1
GSO IEC 60745-2-1
GSO IEC 60745-2-11
GSO IEC 60745-2-13
GSO IEC 60745-2-14
GSO IEC 60745-2-15
GSO IEC 60745-2-16
GSO IEC 60745-2-17
GSO IEC 60745-2-18
GSO IEC 60745-2-19
GSO IEC 60745-2-2
GSO IEC 60745-2-20
GSO IEC 60745-2-21
GSO IEC 60745-2-4
GSO IEC 60745-2-5
GSO IEC 60745-2-6
GSO IEC 60745-2-7
GSO IEC 60745-2-8
GSO IEC 60745-2-9
IEC 60745-2-12
IEC 60745-2-3
IEC 61029-1
IEC 61029-2-1
IEC 61029-2-10
IEC 61029-2-11
IEC 61029-2-12
IEC 61029-2-2
IEC 61029-2-3
IEC 61029-2-4
IEC 61029-2-5
IEC 61029-2-6
IEC 61029-2-7
IEC 61029-2-8
IEC 61029-2-9