Download - AUSTRALIA HVAC
1RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.aur e c t o r s e a l . c o m . a u
HVACS O L U T I O N S
installation/maintenance/repair
A U S T R A L I A
2RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
Condensate Management
Mighty Bracket™ 5 PRO-Fit™ 6 Safe-T-Switch® 7
EZ Trap® 9
T A B L E O F C O N T E N T S
Related Solutions
AC Equipment Base
Polyslab™ 3
Pipe Joining
Thread Sealants 22 Soldering Flux 24
Caulks & Sealants
RS 136 25 Silicone Sealants 25
Specialty Products
Mighty Pump™ 12 Kickstart® 13 AC Leak Freeze® PRO 14
Acid-Away® PRO 18 Coil Cleaner 20
Through commitment to providing high quality products and services, RectorSeal Australia Pty Ltd has grown steadily over the years. With a diversified business strategy, we are aggressively pursuing new and unique technology to solve industrial problems and to expand market horizons.
RectorSeal Australia Pty Ltd is devoted to providing innovative quality products supported by strong customer and technical service
We look forward to serving the global market and now here in Australia for another 80 years.
Providing high qualityproducts & services
3RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
Patented Polyslab is a lightweight universal polymer equipment base for use with HVAC, Plumbing and Irrigation equipment.Polyslab is recommended for split system air conditioners, generators, pumps & more.Available in multiple sizes, each durable, stylish, and easy to use. Polyslab maximizes the strength-to-weight ratio, and is suitable for installation on any surface. Can be used both indoors and out.
Polymer type sealants leave residue in lines Leak Freeze is polymer free
Rugged, light weight, support.A U S T R A L I A’ S M O S T T R U S T E D
E Q U I P M E N T B A S E
POLYSLAB
4RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
Perimeter SupportCombined with the channel supports gives the greatest possible surface area support.
Equipment BasesPolyslab™
Application • Lightweight universal polymer equipment base for hot water systems • For indoor and outdoor use
Recommended for • Supporting Split System Air Conditioning units and equipment
Code Description Load Rating
PSAC - LGE 1130 x 650 x 51mm - 6.5kg 160kg
PSAC - MED 885 x 465 x 51mm - 2.4kg 160kg
PSAC - SML 640 x 340 x 51mm - 1.6kg 120kg
Multiple Channel SupportsTransfer weight of the unit directly to the ground to prevent sinking. The design also allows products to ‘lock in’ and stack easily for transport.
Underside RibsThe location, thickness, and depth have been designed to maximise strength.
Ultra LightweightAll Polyslab Bases replace heavy, cumbersome, and often fragile pre-cast concrete slabs. Avoid injuries and OH&S litigation with the durable, stylish, lightweight alternative.
FEATURES• Australian made• Made of recycled materials• Eco-friendly & UV resistant• Impact resistant & ultra lightweight• Supports all split system air conditioning units• Stackable design
5RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
TYPICAL MINI-SPLIT MOUNTING PLATE
MOUNTING PLATE TAB
MOUNTING HOOK
FOOT SUPPORT
SUPPORT ARM
GATE WITH SLEEVE SOCK
LEVEL ADJUSTMENT PIN
Note: When installing the indoor unit’s mounting plate, ensure that the correct hardware is used. If hung on drywall, it is recommended to attach the plate to a stud, making certain that the tab area is securely attached to the wall. Add more screws around mounting plate tabs for heavy units. Always install mounting plate according to the manufacturer’s published instructions.Warning: Bracket not to be used for weight above 45 kg.
Mighty Bracket™ Mini-split installation support tool
Code Description Qty. A P P L I C A T I O N • Hook onto mini-split mounting plate to hold mini-split unit securely in place while installing refrigerant lines, condensate line and electrical hookup.
U S E R I N S T R U C T I O N S 1. Attach Mounting Hooks of Mighty Bracket to the mini-split mounting plate tabs. (If no tabs are present on the mounting plate, Mighty Bracket hooks can be attached by screws threaded into the wall stud.) 2. Place Foot Supports flat against the wall. (If necessary to avoid potential wall scratching, place clean towel or cardboard between support foot and wall surface) 3. Position Level Adjustment Pins to make Support Arm of the brackets horizontal. 4. Position Lift Gates at the end of Support Arms to make sure the unit cannot slide off. 5. Place protective Sleeve Socks over Gates to avoid scratching the unit. 6. Set unit securely onto the top of the Support Arms. 7. Connect refrigerant lines using RectorSeal® NoKink™.* 8. Connect condensate drain piping and electrical wiring. 9. Carefully lift and place the indoor unit onto top tabs of mounting plate. 10. While ensuring unit does not fall, carefully remove Mighty Bracket and installation is complete.
97705 Mini-split support tool 4
F E A T U R E S• Allows single person installation• Simple clip on support• Does not damage walls • Use on most brands of mini-
splits• Folds for easy storage• Includes tote bagUS Patent No 9,772,113
* When paired with RectorSeal® NoKink™, Mighty Bracket™ allows simple installation without damaging or kinking copper refrigerant lines.
6RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
PRO-Fit™ Precision Flaring & Swaging tool bit kits
Code Description Qty. A P P L I C A T I O N • Creates precise and fast standard 45° flare or swage in copper and aluminum line sets for Mini-split HVAC units • The spinning hex flare bit forms a standard 45° flare, and the hex swage bit forms a consistent swage without splits, burrs, blemishes or uneven edges that typically cause fitting connection leaks
R E C O M M E N D E D F O R • Copper & aluminum line sets • Mini-split HVAC units • Any application requiring a 45° flare
87001 PRO-Fit Flare kit 487011 PRO-Fit Swage kit 4
F E A T U R E S• Stopper ensures a consistent
length of the flare/swage surface
• Tip guides the bit into the tube & forms a standard 45° flare or consistent swage
• Standard 1/4" Hex Shank fits directly into most power tools without adapter
• Color coded hex bits for easy ID• Available in flare or swage bits• Comes in a durable see-
through case for better tool visibility
PRO-Fit SwageCopper Swage
PRO-Fit FlareCopper Flare
7RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
S A F E - T - S W I T C H ® O V E R F L O W S W I T C H E SThe most reliable switch.
Can be installed in a horizontal or vertical position
SS1 Float Switch For primary drains or auxiliary drain outlets
Code Description Qty. A P P L I C A T I O N • Detects clogged A/C condensate drains and shuts off the system to prevent water damage to floors, walls and ceilings • Can be installed horizontally or vertically, inline or on the primary pan’s auxiliary drain outlet by using the included ¾" adapter, bushing and cap • Can be installed on a sloping line and does not need to be level or plumb US Patent No. 6,442,955
97632 Model SS1 2497630 Contractor Pack 50
IND. CONT EQ.75MF
UL 508
F E A T U R E S• Condensate overflow switch• Magnetic reed switch• Install vertically or horizontally• Connect to either red or
yellow wire • NEW! Includes directional cleanout
tool to provide cleanout access.• POP Blister packaged
SS2 Float Switch For primary drain pan auxiliary outlet
Code Description Qty. A P P L I C A T I O N • Detects clogged A/C condensate drains and shuts off the system • Using the ¾" adapter the SS2 can be installed on the auxiliary outlet of the primary drain pan • Easy access to the switch and the primary drain line for service
US Patent No. 6,442,955
97637 Model SS2 2497635 Contractor Pack 50
IND. CONT EQ.75MF
UL 508
F E A T U R E S• Condensate overflow switch• Magnetic reed switch• Connect to either red or
yellow wire• POP Blister packaged
A plenum rated model is available – SS2AP
SS3 Float Switch For primary and auxiliary drain pans
Code Description Qty. A P P L I C A T I O N • Detects clogged A/C condensate drains and shuts off the system • Steel mounting bracket clips firmly over the edge of most drain pans • Slim profile can be installed on primary or auxiliary drain pans.
US Patent No. 6,698,215
97647 Model SS3 2497645 Contractor Pack 50
IND. CONT EQ.75MF
UL 508
F E A T U R E S• Condensate overflow switch• Magnetic reed switch• Connect to either red or
yellow wire• POP Blister packaged
8RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
Model SS103E Primary & auxiliary drain pans
Code Description Qty. A P P L I C A T I O N • For primary drain line and auxiliary drain pan or auxiliary drain outlet and auxiliary drain pan • Can be installed horizontally or vertically or inline • Onboard LED indicates the condition of the unit at a glance • No moving parts
US Patent No. 6,698,215
97692 Model SS103E 24
IND. CONT. EQ.25XE
UL 508
F E A T U R E S• Electronic probe sensor• 5-wire design • Onboard LED indicator• Connect to either red or yellow wire
Model SS500EP Commercial rooftop downflow units
Code Description Qty. A P P L I C A T I O N • Install on primary drain pan when plenum rating is needed • Small size and slim profile great for use on commercial rooftop downflow units
US Patent No. 6,698,215
97693 Model SS00EP 12
IND. CONT. EQ.25XE
UL 508UL 2043
F E A T U R E S• Electronic probe sensor• 5-wire design • Onboard LED indicator• Plenum rated wire• Connect to either red or yellow wire
Safe-T-Switch® SS610E Mini-split systems
Code Description Qty. A P P L I C A T I O N • Designed for mini-split systems • For installation directly on primary drain pan or clipped to coils above primary drain pan • Multi-voltage • Can be wired in both normally open & normally closed systems
US Patent No. 8,887,392
97622 Model SS610E 12
IND. CONT. EQ.25XE
UL 508
F E A T U R E S• Sensor connects to indoor units• Attaches to pan or coils with unique bracket• Onboard LED indicator can be mounted to side of unit• No batteries required
9RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
RS # (ref. #) Size
83114 (EZT113B) 3/4"
Condensate Traps and Overflow Switches
Economy trap kit w/brush Thinner walled trap for light duty applications. 10 per carton.Includes: 3/4" trap, 3/4" cross, 3/4" tee, three 3/4" red caps, cleaning brush, 1" drop.
Easy Maintenance & Overflow Protection
1 SmartTrap™(200 SERIES)
Adds a float switch that warns of blockage and shuts down the A/C unit. Slip fit float switch removes easily for cleaning and inspection.
RS # (ref. #) Size
83119 (EZT119) 1"
2Proven reliability and higher switching capacity with microswitch technology. (4A NO/NC)
High flow commercial trap kitfor use when a 1" dia. discharge is required. 10 per carton.Includes: 1" standard trap, 1" cross, 1" tee, 1" x 3/4 reducer bushing, 3/4" black stub, two 1" red caps, 1" male adaptor, cleaning brush, 1" drop.
53 Transparent Trap
is easy to clean and easy to inspect
Quality construction with durable schedule 40 PVC fittings.
4Watertight red caps provide easy access to clean the trap and drain pan outlet.
2 Year Warranty
Patent No. 5,069,042
EZ TRAP® 100 SERIES CLEAR TRAP™ KITSC l e a r c l e a n a b l e t r a p
10RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
Patent No. 6,698,225
For Negative & Positive Pressure Systems Up to .5" WG, Capacity 2.7 GPM
UltraTrap™
Unique patented design retains no water and needs no priming. Spring-assisted float eliminates standing water and freezing problems associated with conventional P traps. UltraTrap allows free flow of condensate while preventingreverse airflow.
1
Transparent trap allows for easy cleaning and inspection.
Stainless steel spring.3 4
2 Captive twist-off locking ring.
Condensate collects
Floatdepresses.
water is released
UltraTrap™ Waterless Condensate Traps
E Z T R A P ® 1 0 0 S E R I E S W A T E R L E S S K I T SWaterless freeze protection.
2 Year Warranty
RS # (ref. #) Size
RS # (ref. #) Size
83150 (EZT150) 3/4” OR 1”
UltraTrap waterless trap kit eliminates standing water and freezing problems. Positive or negative pressure systems. 5 per carton. Includes: 3/4” UltraTrap, 3/4” cross, two 3/4” red caps, 3/4” male adaptor, 3/4” coupler, cleaning brush.
83180 (EZT180) 5/8” Mini waterless in-line trapsized for use in ductless mini-split applications. Use on any mini-split condensate drain line. Permits free condensate flow while blocking odors, noise and insects. Freeze resistant. Only 2-3/4” long. 10 per carton. Includes: 5/8” MiniTrap, 9/16” adapter.
* Per 2015 IMC 307.2.4.1 Commentary: All mini-splits shall require an inline check valve in the drain line or trap to prevent airflow from interfering with con-densate flow and prevent the escape of air through the drain.
11RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
HVACS O L U T I O N S
maintenance/repair
HVACS O L U T I O N S
installation
HVACS O L U T I O N S
related
HEATINGS O L U T I O N S
ACS O L U T I O N S
ductless
ACS O L U T I O N S
related
HVACS O L U T I O N S
unitary
Mighty Pump™
AC Leak Freeze®
Acid-Away®
KickStart®
Coil Cleaners
Thread Sealants
Soldering Flux
12RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
V A C U U M O R P U S H - O U T C L O G I N C O N D E N S A T E D R A I N L I N E S
Mighty Pump™ Quickly & Completely clear blockage
Code Description Qty. A P P L I C A T I O N • Hand-operated pump that can be used to vacuum or push-out a clogged drain line from inside or outside the home or building • Generates enough pressure to clear slime, mold & dirt plugsR E C O M M E N D E D F O R
• Drain Line • A/C condensate pans • Secondary overflow pans • Water heater pans • Tubs & toiletsI n c l u d e s • Pump body • Flexible hoses • Spring check valves • ¾" adapter • Spare O-rings
97795 Mighty Pump™ 4
F E A T U R E S• No nitrogen tank or gas cartridges needed• 2-way flow w/o backflow• Lightweight, heavy-duty molded PVC • Easy clean up
• High volume, low pressure
13RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
Kickstart® Potential relay & start capacitor
Code Description Qty. A P P L I C A T I O N • 2-wired starting device that uses a mechanical potential relay & start capacitor • Assist compressors in starting under very adverse conditions such as low voltage or high head pressures extending the life of compressors by bringing them up to full speed more quickly and efficiently
R E C O M M E N D E D F O R • Single phase 208V, 230V, and 265V A/C, refrigeration and heat pump compressors • KS-1 handles 3.5 - 5.0 ton maximum torque • TO-5 handles 1.0 - 3.0 ton maximum torque
96506 KS-1 2096503 TO-5 20
F E A T U R E S• 2-wire design for easy installation• 3-year warranty • Extend the life of compressors• OEM tested & approved
14RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
AC Leak Freeze PRO Series. Single use injector infuses sealant
into the system using a standard HVAC manifold.
Nano leak seeking formula is polymer free. Seals leaks permanently. Non-clogging
to equipment.
Polymer type sealants leave residue in lines Leak Freeze is polymer free
R E F R I G E R A N T L E A K S E A L A N T
OEMAPPROVED
Polymer-free leak sealants. Safely extend A/C & refrigerant system life.
15RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
Safely extend A/C & refrigerant system life.
T H R E E S E A L A N T F O R M U L A S
NANO NANO Magic Frost UV R-Appliance
If there were just one type of refrigerant leak, AC Leak Freeze would offer just one leak sealant.NANO leak sealant formula is reliable, safe and polymer free. Magic Frost adds an anti-friction lubricant to reduce noise/vibration so system runs smoother, more efficient. UV adds the ability for a UV light source to detect larger leaks for system assessment.
PRO Series infusion. Sealant is infused using standard
HVAC Manifold. Recommended for use in both high pressure R410 and low pressure R22 systems.PRO series is sold in ducted and ductless canister sizes.
S E A L A N T D E L I V E R Y S Y S T E M S
PRO Series - For HVAC manifold delivery (ducted)
PRO Series - For HVAC manifold delivery (ductless)
16RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
PRO nano PRO nano Magic Frost PRO UV
AC Leak Freeze® PRO Leak sealant & system enhancer
Code AC Leak Freeze PRO Qty. A P P L I C A T I O N • Revitalizes A/C & refrigeration systems by permanently sealing small, hard-to-find micro gas leaks • Infuses into system through standard ¼ inch service port using an HVAC Manifold • For use in copper and aluminum coils • Non-clogging to compressors, recovery units, Schrader valves, cap tubes, TXV valves, micro channels, evacuation equipment and gauges • Compatible with all refrigerants • Magic Frost formula enhances system performance to reducing compressor noise and extend compressor life. • UV formula adds the ability for a UV light source to detect larger leaks for system assessment.
U.S. Patent Pending
45316 1.46 oz. / 43 mL nano 1245317 1.46 oz. / 43mL nano Magic Frost 1245318 1.46 oz. / 43 mL UV 12
F E A T U R E S• Single use - disposable• Polymer free nano formula• Safe for system• Ready to use• Non-flammable• Non-Toxic• POP packaged
OEMAPPROVED
PRO nano PRO nano Magic Frost PRO UV
17RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
AC Leak Freeze® PRO Mini-split system leak sealant
Code AC Leak Freeze PRO Qty. A P P L I C A T I O N • Revitalizes Mini-split A/C systems by permanently sealing small, hard-to-find micro gas leaks • Infuses into system through standard ¼ inch service port using an HVAC Manifold • For use in copper and aluminum coils • Non-clogging nano formula • Compatible with all refrigerants • UV formula adds the ability for a UV light source to detect larger leaks for system assessment. U.S. Patent Pending
45309 0.5 oz (15 mL) PRO Mini-split 1245308 0.5 oz (15 mL) UV Mini-split 12
F E A T U R E S• Reduced 15 mL content• Single use - disposable• Polymer free nano formula• Safe for system• Ready to use• Non-flammable• POP packaged
OEMAPPROVED
18RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
Revitalize compressors.
C O M P R E S S O R A C I D N E U T R A L I Z E R S
Restore pH balance and A/C performance.
Acid-Away® quickly and safely neutralizes harmful A/C acids - the primary cause of compressor burnout. Acid-Away® provides a unique approach to solving the problem of acid buildup in A/C and refrigeration systems that operate using mineral oil or alkylbenzene type refrigerants. It prevents compressor burnouts by neutralizing acid molecules, unlike other products which coagulate to be caught in the filter drier. Injects into the system using a standard HVAC manifold.
19RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
Revitalize compressors.
ACID NEUTRALIZERS
Acid Away® PRO Compressor burnout acid neutralizer
Code Description Qty. A P P L I C A T I O N • Chemical treatment for use in air conditioning and refrigeration systems that have experienced a burnout, or operating systems that are showing buildup in acid content • Acid-Away PRO quickly circulates throughout the system and chemically neutralizes acids that are always left in air conditioning or refrigeration systems after a burnout occurs • Once neutralized, the acid can no longer continue developing corrosion impeding it from causing another burnout to the system
R E C O M M E N D E D F O R • Air conditioning and refrigeration systems • Safe for all oils • Acid-Away may be used in either hermetic or semi-hermetic compressors that operate with standard CFC or HCFC refrigerants
45016 1.5 fl. oz. (44 mL) 12
F E A T U R E S• Quick & easy to inject• Disposable injector• Compressor parts safe• No harmful effects• Tested to ASHRAE standards 86-1983 & 97-1989 by premier independent testing institute
Low Loss Fitting
Copper/Brass High Pressure Cartridge
Maximum operating pressure is 600psi
Disposable Cartridge
High Visibility Packaging For
Easy ID
Connects To Standard 1/4" Service Ports
Installs Using Standard HVAC
Manifold
20RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
Polymer type sealants leave residue in lines Leak Freeze is polymer free
Restore peak efficiency. E V A P O R AT O R C O I L C L E A N E R
• Fast acting • Non-Acid • Indoor application • Biodegradable• Low odor • Non-corrosive
Desolv coil cleaner safely and effectively powers off dirt and buildup on air conditioning, refrigeration and heat pump coils.Completely biodegradable formula presents very little hazard to people, animals, aquatic life, and vegetation. Unlike strong acid and alkaline coil cleaners, this heavy duty product will not chemically attack (corrode) coils, surrounding metal, other HVAC equipment components or application equipment.Desolv reduces energy cost by increasing the efficiency of the A/C system. Available in concentrated spray or Aerosol.
Desolv coil cleaning Kit. Use to deep clean the indoor evaporator of mini-split A/C units that are located in areas where wall and floor protection are necessary. Kit is reusable. Desolv Solution and Funnel Bags are also sold separately. The replacement funnel bags are for single use only.
21RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
C O I L C L E A N E R S
Single use replacement funnel bags
Complete Desolv Kit
Desolv™ Mini-split evaporator coil cleaner / cleaning kit
Code Description Qty. A P P L I C A T I O N • Use to deep clean the indoor evaporator of mini-split A/C units. Desolv Kit provides wall and floor protection. Kit is reusable. Desolv aerosol/solution and the single use replacement funnel bags are also sold separately.
82565 Desolv solution 3.8 L 682560 Desolv kit w/2 funnel bags 182562 Single use funnel bags 10
D E S O LV K I T C O N T E N T S• Desolv Cleaning Solution (3.8L) • C-Band Frame Assembly• Single Use Funnel Bags (2)• Drain Pail (19 L) • Installation Instructions
P1
Product Licensed UnderU.S. Patent #6863116
22RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
R E C T O R S E A L ® T H R E A D S E A L A N T SThe finest thread sealants in the industry formulated by our highly-skilled chemists
Also available in 55 gal. container.
RectorSeal No. 5®Multi-purpose pipe thread sealant
Code Description Qty. A P P L I C A T I O N • Lubricates and protects threaded pipe and fittings • Can be pressurized immediately up to 100 psi for piping up to 2" diameter • Ideal for a wide variety of fluids and gases including potable water
R E C O M M E N D E D F O R • Galvanized Steel • Iron • Brass • Copper • Aluminum • Stainless Steel • Polyethylene • RTRP • PVC
25790 1-¾ oz. (52 mL) 2425631 ¼ pt. (118 mL) 2425551 ½ pt. (236 mL) 2425431 1 pt. (473 mL) 1225300 1 qt. (946 mL) 1225271 1 gal. (3.8L) 425191 5 gal. (19 L) 125112 55 gal. (208 L) 1
LISTEDPIPE JOINT COMPOUNDMH-12259
LISTEDPIPE JOINT COMPOUNDMH-12259
F E A T U R E S• Soft set / Slow drying• Lead free• Smooth application• 2 year shelf life• Certified to
NSF/ANSI 61-G & 372
No. 5® Sub-Zero
Low temperature, low odor pipe thread sealant
Code Description Qty. A P P L I C A T I O N • Odorless, non-staining, low temperature application • Brushable to – 35°F (-37°C) • Can be pressurized immediately
R E C O M M E N D E D F O R • Galvanized Steel • Iron • Brass • Copper • Aluminum • Stainless Steel • Polyethylene • RTRP • PVC
27731 ¼ pt. (118 mL) 2427651 ½ pt. (236 mL) 2427541 1 pt. (473 mL) 1227460 1 qt. (946 mL) 1227371 1 gal. (3.8L) 427222 55 gal. (208 L0 1
F E A T U R E S• Low temperature
application –35°F (-37°C)All weather formula
• Lead free• 2 year shelf life
See ordering chart for container sizes available
23RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
No. 7 Corrosive chemical pipe thread sealant
Code Description Qty. A P P L I C A T I O N • Slow drying sealant for use with lines carrying corrosive chemicals: diluted acids, caustics and other chemical solutions R E C O M M E N D E D F O R • Galvanized Steel • Iron • Brass • Copper • Aluminum • Stainless Steel
17432 1 pt. (118 mL) 4
F E A T U R E S• Soft set• Lead free• 2 year shelf life
RectorSeal T Plus 2®PTFE enriched pipe thread sealant
Code Description Qty. A P P L I C A T I O N • Contains PTFE & synthetic fibers for superior performance • Can be pressurized immediately following application
R E C O M M E N D E D F O R • Galvanized Steel • Iron • Brass • Copper • Aluminum • Stainless Steel • Polyethylene • RTRP • PVC • CPVC • ABS
23710 1-¾ oz. (52 mL) 2423631 ¼ pt. (118 mL) 2423551 ½ pt. (236 mL) 2423431 1 pt. (473 mL) 1223391 1 qt. (946 mL) 1223271 1 gal. (3.8 L) 423191 5 gal. (19 L) 123112 55 gal. (208 L) 1
LISTEDPIPE JOINT COMPOUNDMH-12259
LISTEDPIPE JOINT COMPOUNDMH-12259
F E A T U R E S• Non-setting• Lead free• 2 year shelf life• Certified to
NSF/ANSI 61-G & 372
RectorSeal Tru-Blu™ Vibration resistant pipe thread sealant
Code Description Qty. A P P L I C A T I O N • For high vibration environments such as refrigeration and industrial applications • Designed for sealing vibration prone NPT connections
R E C O M M E N D E D F O R • Galvanized Steel • Iron • Brass • Copper • Aluminum • Stainless Steel • PVC • Polyethylene • Reinforced fiberglass
31780 1-¾ oz. (52 mL) 2431631 ¼ pt. (118 mL) 2431551 ½ pt. (236 mL) 2431431 1 pt. (473 mL) 1231300 1 qt. (946 mL) 12
F E A T U R E S• Fast drying / Flexible set• Contains PTFE• Lead free• 2 year shelf life• Certified to NSF/ANSI
61-G & 372
Also available in 5 and 55 gal. containers.
LISTEDPIPE JOINT COMPOUNDMH-12259
24RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
R E C T O R S E A L ® S O L D E R I N G
Nokorode® Regular
Multi-purpose paste flux
Code Description Qty. A P P L I C A T I O N • All purpose, soft soldering paste flux with a special oil base that protects the solder against corrosive attack • Non-aggressive formula. Ideal for copper and brass fittings
R E C O M M E N D E D F O R • All solder alloys including 95/5 and lead free solders
14000 1.7 oz. (50 mL) 4814010 4 oz. (118 mL) 24
14020 8 oz. (236 mL) tool box 24
14030 1 lb. (473 mL) 12
F E A T U R E S• Lead Free • Cleans & fluxes all at one time• Safe for potable water systems• Certified to NSF/ANSI 61-G & 372• Meets O-F-506 Type 1A & A-A-51145, MIL-F-4995-2 specs
Rectorshield™ Heat absorption paste
Code Description Qty. A P P L I C A T I O N • A heat absorption paste to help prevent damage to sensitive controls, valves, plastic faucet parts, equipment and other soldered connections • Reduces heat transfer by absorbing thermal energy from heat and flames
R E C O M M E N D E D F O R • Copper • Other types of metal pipe
83554 11 oz. (325 mL)tube 24
F E A T U R E S• Biodegradable• Odorless
25RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
R E C T O R S E A L ® C A U L K S & S E A L A N T S
Metacaulk® RS 136Code Description Qty.
66408 10.3 oz. (304 mL) cartridge 12
F E A T U R E S• Smoke & acoustic caulk• Non-combustible• Interior application• Tested in accordance with ASTM E136• 2 year shelf life• Color: Red
A P P L I C A T I O N • General purpose fireblock, draft stop • Beds and seals small voids, splices and gaps • Water soluble • Not for use in vibration or wet environments R E C O M M E N D E D F O R • Large openings • PVC/CPVC pipe (closed only) • EMT • Steel, Copper, and Aluminum Pipe
Fireblock / Smoke seal caulk
RectorSeal ® Silicone Sealant General purpose
Code Description Qty. A P P L I C A T I O N • Ideal for general sealing • Dries to touch in 30 minutes and fully cures in 24 hours
R E C O M M E N D E D F O R • Around electrical panels • Windows • Doors • Pipes/vents • Corner joints • Aluminum siding • Other interior / exterior building materials
57505 10.3 oz. (304 mL) tube – white 12
57506 10.3 oz. (304 mL) tube – clear 12
F E A T U R E S• Remains flexible• Vibration resistant• Indoors/outdoor
RectorSeal ® Hi-Temp™ 100% RTV silicone caulk
Code Description Qty. A P P L I C A T I O N • Cures to a strong durable resilient rubber
R E C O M M E N D E D F O R • Glass • Clean metal • Most types of non-oily wood • Vulcanized silicone rubber • Silicone resins • Natural and synthetic fiber • Ceramic • Paper • Many painted and plastic surfaces
57500 10.1 oz. (299 mL) cartridge 24
F E A T U R E S• One component • USDA specs for use in federally inspected
meat and poultry plants• F.D.A. reg #21 CFR 177.2600
26RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
I N D E X O F P R O D U C T S
AC Leak Freeze PRO 14Acid Away PRO 18Desolv 20EZ Trap 9EZT113B 9EZT119 9EZT150 10EZT180 10Kickstart 13KS-1 13Metacaulk RS 136 25Mighty Bracket 5Mighty Pump 12No 7 23Nokorode Regular Paste 24Polyslab 3PRO-Fit 6RectorSeal Hi-Temp 25RectorSeal No 5 22RectorSeal No 5 Sub-Zero 22RectorSeal Silicone Sealant 25RectorSeal T Plus 2 23RectorSeal Tru-Blu 23RectorShield 24Safe-T-Switch 7SS1 7SS2 7SS3 7SS103E 8SS500EP 8SS610E 8TO-5 13
27RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
28RectorSeal Australia PTY. Ltd. • PO Box 3119 Clontarf DC, QLD 4019 • 07 3267 7277 • rectorseal.com.au
A B O U T R E C T O R S E A L
RectorSeal Australia Pty Ltd first established business
in Australia in 2014, through acquisitions of leading
Australian HVAC, plumbing and irrigation brand in
Polyslab®.
Our industry pedigree however, dates back to 1937,
when RectorSeal first formed in Texas. RectorSeal has
long been a leading manufacturer of chemical speci-
alty products in HVAC and plumbing.
These products are distributed exclusively through an
extensive wholesale distribution network serving the
plumbing, industrial, HVAC, construction, electrical,
and hardware market.
RectorSeal Australia Pty Ltd takes great pride at being
the brand preferred by professional contractors and
end users.
All information is believed to be current at the time of printing, but our policy is one of continu-ous development. RectorSeal makes no warranties, express or implied, as to its accuracy. Rec-torSeal reserves the right to discontinue, update or change the information at any time without notice or without incurring obligations.RectorSeal®, the logos and other trademarks are property of RectorSeal, LLC, its affiliates or its licensors and are protected by copyright, trademark and other intellectual property laws, and may not be used without permission. RectorSeal reserves the right to change specifications without prior notice.©2019 RectorSeal. All rights reserved. R50403 0419
RectorSeal Australia PTY, Ltd.PO Box 3119 Clontarf DC, QLD 401907 3267 7277rectorseal.com.au