Download - CFETR 电流 驱动的 初步讨论
ASIPP
CFETR 电流驱动的初步讨论
李国强 任启龙 刘素梅 宋云涛中科院等离子体物理研究所
ASIPP
中性束切向注入
• 目前的窗口应该可以实现中性束切向注入
• ITER NBI aperture size (58cm,136cm)
• May vertically tilt to drive off-axis current
ASIPP
The driven current of different injection angle
• 磁轴高度上水平入射• 1 MeV NNBI, 30MW• density profile is scaled
from DIII-D 136345.• ne=0.9e20/m^3• Density peaking=1.38• Calculated with ONETWO/
NUBEAM
切半径( cm) 400 450 500 550 600 650 700
Drive current (MA) 0.44 0.56 0.70 0.82 1.01 1.15 0.71
Driven current of 30MW NBI
ASIPP
ECCD for CFETR
• 140 GHz ECCD was selected, O1 mode• density profile is scaled from DIII-D 136345• Calculated with ONETWO/TORAY-GA
– For ITER, the CQL3D results are about 1.2 times of TORAY-GA
• 弱场侧斜上方入射,扫描入射角度• 需要更多的扫描计算
170G 共振面140G 共振面
入射极向角 100 110 120 130 140
驱动电流(MA)
0.60 0.72 0.75 0.69 0.09
30MW ECCD, 环向角 230度
ASIPP
ECCD calculation on ITER
ASIPP
LHCD• LHCD efficiency becomes lower with the density increase, but
still higher than NBCD and ECCD• But the driven current cannot access the core region
FDF, 30MW ITER, 30MW, ne=7.25e19/m^3
ASIPP
Discussion
• Lower density is beneficial for CD• How to balance the density and fusion power?• The combination of Heating/CD ?
ASIPP
谢谢