SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
1 « Midi DD » leviers fédéraux tendances
Nouvelle Economie
16 septembre 2014
Bram Soenen
SPF Santé publique, Sécurité de la Chaîne alimentaire et Environnement
DG Environnement (DG5)
Division politique de produits et Chemicals (DPPC) DG5 Politique de Produits
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
2 La politique intégrée des produits
minimaliser l'impact environnemental des produits
Approche cycle de vie
Projets pilots Product Environmental Footprinting (PEF)
(2014-2017):
Establish a common methodological approach to assess, display and benchmark the environmental performance of products, services and companies based on a comprehensive assessment of environmental impacts over the life-cycle
http://ec.europa.eu/environment/eussd/smgp/product_footprint.htm
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Stratégie fédérale et feuille de route
Economie circulaire (1/3) • 3 GT SPF Economie & SPF Santé
(juin 2013 – juin 2014)
• Synergie Conseil Central de l’Economie
(acteurs déchets)
• Etude préparatoire VITO-ICEDD-TNO
(mai 2014)
• Prochain gouvernement – Ministre
?
3
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Stratégie fédérale et feuille de route
Economie circulaire (2/3) • Réponse au stratégie EU 2020 pour une croissance intelligente,
durable et inclusive
Flagship initiative for a resource efficient Europe
• Au-delà de l'utilisation plus efficace des ressources
Economie Circulaire
• Développer des indicateurs et objectives
• Plateforme de consultation et concertation
• Complémentaire aux Régions (Vlaams materialenbeleid;
Marshall Plan 2.vert)
• EU Eco-conception un des leviers possibles
4
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Stratégie fédérale et feuille de route
Economie circulaire (3/3)
•Evaluation du potentiel
macro-économique
•Echange d’information
acteurs design et fin de vie
•Durée de vie produits
•Identifier et enlever
obstacles normatives
•Sensibilisation
• Normes de produits
efficacité ressources
• Nouveaux modèles de
commerces
• Export des déchets
• Déclarations
environnementales
• Projet EU PEF/OEF
• Marchées publiques
5
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Directive cadre Eco-conception
(EC/125/2009) • Législation EU Marché Intérieur: législation produits harmonisée
empêche « la fragmentation du marché »
• Directive cadre = mandate à la CE pour Implementing Measures
• Vote Regulatory Committee (experts Etats Membres)
• Exigences environnementales minimales « Produits liés à
l’Energie » (PlE)
• Surveillance de marché par les Etats Membres
• Approche cycle de vie évite le burden shifting
par ex. l'utilisation plus efficace des ressources au détriment de
l’efficacité énergétique
• Exigences correspondent aux Least Life Cycle Coast (LLCC)
6
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
7 Directive cadre
2009/125/EC
Mesure
d’exécution
Horizontale
Mesure
d’exécution
Verticale
Mode veille
Mode arrêt … Chaudières
Transfor-
mateurs Lave-linges …
Exigences
Generiques
(Ecoprofiel)
Exigences
Specifiques
(MEPS)*
… … … …
Accord
Volontaire
Information
(Declaration)
*Minimum Efficiency Performance Standard
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Ecoconception Mesures d’Exécution
Règlement: application directe sans transposition « harmonisation complète »
•Efficacité énergétique
•progressive: après 1-2(-3) selon le cycle du design/marché
•prestations et design
•Information aux consommateurs
•normalement étude de révision dans les 5 années
8
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Processus Eco-conception 9
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
10 Eco-conception phase préparatoire
La Commission fixe le Plan de travail avec des produits prioritaires et lances les études préparatoires
Procédure précise
• Etudes préparatoires (méthodologie: www.meerp.eu)
• Site web de projets, par ex. http://www.ecodesign-windows.eu
• Consultation des parties prenantes
• Impact assessment
• Imput Etats Membres
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Etude préparatoire
Consultation des parties prenantes 11
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
12 Eco-conception adoption et
implémentation • Inter Service Consultation par la Commission
• Notification OMC
• Vote final par les Etats Membres dans le Regulatory Committee
• Adoption et publication par la Commission après procédure de scrutin parlementaire (PE)
• Surveillance de Marché par les Etats Membres dans le group ADCO
Adoption parallèle d’un Acte Délégué sur l’Etiquette Energie par la Commission (Directive jumelle 2010/30/EU, optionnel)
Etiquetage compétence SPF Economie DG Energie
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Obligations des fabricants et importateurs
• Conception et fabrication en conformité avec les critères
Eco-conception
• Exécutez la procédure de conformité (auto-évaluation
est la règle générale)
• Collection des documentations techniques
• Utilisation les normes harmonisés publiés dans le OJEU
pour présomption de conformité (ou transitory measures,
lignes directrices de la Commission, …)
• Mettre la marquage CE et rédiger une déclaration de
conformité
13
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
14 « Non-energy related issues » ? Focus politique sécurité d’approvisionnement de et Climat
Consommation d’énergie pendant la phase d’utilisation
Exigences « non-liées à l’énergie » anecdotique:
• « Bonus efficacité » pour réfrigérants bas en potentiel de réchauffement de
la planète
• VLEs sur NOX, CO et PM pour chaudières
• Limites sur Mercure dans les lampes
• Déclaration teneur de plomb dans TVs
• Utilisation d’eau pour lave-linges
• Durabilité ampoules (nombre de cycle interrupteur; durée de vie)
• Durabilité des aspirateurs (durée de vie moteur)
• Avertisement non-replaceabilité de batterie ordinateur portable
• Bruit ventilation, aspirateurs
• Default duplex printing, remanufacture of cartridges … (Imaging
equipment)
• Information pour le consommateur sur maintenance
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
« Non-energy related issues » : Information aux consommateurs (pièces détachées, réparabilité)
Fonctionnalité minimale (veiller sur critère de qualité)
• Fin de vie prématuré
• Vieillissement et détérioration des performances
Information aux recycleurs
• Marquage plastiques, additives et retardateurs de flammes inclus
• Temps de traitement manuele, …
Critère minimaux
• Durée de vie, réparabilité, teneur matériaux recyclées,…
• Composition polymère, recyclabilité plastiques, …
• Désassemblage réversible
15
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Introduction « non-energy related issues »
dans Eco-conception • Révision ME (Electronic displays 2017 ?)
• ME nouvelle PCE (Commercial Refrigeration 2018 ?)
• ME nouvelle PLE (Windows, taps and showers 2019 ?)
• Mesure horizontale (par ex mode veille 2020 ?)
Mis en vigueur progressive en deux étapes :
• Commencer avec obligation d’informer
• Puis ajouter critères minimaux.
Accord Volontaire (AV) plus de marge pour introduire « non-energy
related issues » surveillance de marchée organisée différemment
16
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Recyclage et Eco-conception:
Pourquoi en Comment ? Information sur désassemblage (cohérent avec WEEE), réutilisation
et recyclage (par ex marquage des plastiques) et la composition
d’un produit (cohérent avec REACH) sont relevant pour les
recycleurs pour leur permettre de recycler de manière plus
efficace, avec moins de risques.
Développement technologique Fin de vie = design + 10 années ?
• Recyclage manuel ou machinal ou les deux ?
• Automatisation ?
Complexité composition flux de déchets:
• Produits plus vieux et plus récents, différents marques
• Différent catégories de produits?
17
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Opportunité pour recyclage efficace
via Eco-conception Normes marquage plastique + contrôle par laboratoire de test possible
Faute de normes Difficile voir impossible de fixer des critères
vérifiable.
Les organisation de normalisation européennes développent les années
suivant des normes permettant d’évaluer le désassemblage, réutilisation,
potentiel de recyclage, la réparabilité et les aspects « durables » des
produits.
Révision Téléviseurs CE considère
•Temps d’extraction minimal pour Printed Cirquit Board, Conductors
et matrix panel
•Logo sans plomb
•Marquage plastique
•recyclability rate index de composants plastiques
18
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Obligations vis à vis la prolongation de la
durée de vie (1/2) From [DATE] the manufacturer or importer shall declare what the
available spare parts of a [PRODUCT] are.
If spare parts are available, the manufacturer or importer or their
authorised representative(s) shall declare:
(a) contact details including a free access website to obtain
ordering and shipping information, including at least his own
customer service or repair shop;
(b) contact details of professional repair and servicing centers that
are able to repair and service the product, including at least his
own customer service or one servicing center that is recognized
by him to provide repair and maintenance services for their
products.
19
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Obligations vis à vis la prolongation de la
durée de vie (2/2) For any spare parts available from the manufacturer or importer
himself, they shall declare:
(a) the first date they are available and the price at that date.
(b) the length of time that they are planned to be available after
the end of production;
Or if disassembly and replacement instructions or spare parts are
not available, they shall provide on the external packaging of
the [PRODUCT], the following information ‘The manufacture
does not provide spare parts and replacement instructions for
this product’.
20
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Extraction des components clefs (1/2)
From [DATE], manufacturers shall declare the total extraction
time of the following components or materials from a product
unit:
(a) printed circuit boards (larger than 10 cm2);
…
(h) any other materials or components referred to in Article
8(2) of Directive 2012/19/EU of the European Parliament and of
the Council of 4 July 2012 on waste electrical and electronic
equipment and listed in Annex VII
21
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Extraction des components clefs (2/2) Upon request, manufacturers and importers shall provide within
10 days to Member State authorities and recyclers detailed
instructions for the manual extraction from the [PRODUCT] of any
materials and components covered by the point a) to h) of this
paragraph, including:
i. a numbered list of the key components present
ii. one or more graphical representations of the model showing the
location of any materials and components covered by the
point a) to h)
iii. a list of the required tools
iv. the sequence of extraction steps and how to perform these each
step
v. a graphical representation of each tear down step
22
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Marquage des composants en plastique
From [DATE] manufacturers shall, if sufficient space is available
after inclusion of the safety-related information, mark plastic
parts with a mass larger than 100g by specifying the typology of
plastic polymer or blend set between the punctuation marks “>”
and “<”.
Plastic parts with a mass larger than 100g may include in the
specified typology information related to:
(i) the presence of fillers.
(ii) the presence of fire retardant in plastic parts
23
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Obligations sur la composition des
plastiques (1/2) From [DATE] manufacturers shall ensure that
plastic parts with a mass greater than 100 grams consist of one
single polymer or polymer blend.
all plastic parts with a mass greater than 100 grams consist of no
more than four separable polymers or polymer blends, as
indicated in table x in Annex XX.
The following shall be excluded :
- packaging, tape, plastic protective and stretch wraps, labels;
- Printed Circuit Boards (PCB), wiring and cables, electronic
components, optical components, electrostatic discharge (ESD)
components, electromagnetic interference (EMI) components;
24
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Obligations sur la composition des
plastiques (2/2) From [DATE] the recyclability rate index of plastic parts in
[PRODUCT] shall be higher than 80% .
The recyclability rate index of plastic parts in [PRODUCTS] shall be
determined in accordance with the following equation:
Where:
Rplastic = recyclability rate index of plastic parts [%]
mi = mass of the ith plastic part heavier than 100g
mtot = total mass of plastic parts heavier than 100g
RCRi = recycling rate of the material used in the ith plastic part
heavier than 100g [%] as specified in the table :
25
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Obligation d’information sur le contenue
des plastiques recyclés (1/2) From [DATE] the manufacturer or importer shall make information
available on the minimum percentage of postconsumer recycled
plastic content in the [PRODUCT], calculated as a percentage of
total plastic weight of the plastic components with a mass >
100g.
To allow appropriate updating the following information shall be
declared on the free access website. The same information may be
declared in the product information if the date of manufacture is
given.
The manufacturer or importer shall declare “Not applicable” the
product was intended to be placed on the market for less than 18
months, all plastic parts have a mass ≤ 100g.
26
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
Obligation d’information sur le contenue
des plastiques recyclés (2/2) Recycled content shall be assessed on the production period of 1
year within the last 18 months (immediately following any previous
such dates) based on traceability of post-consumer recycled plastic
supply and an overall allocation and mass balance of plastic
provided by the manufacturer. Recycled content is a property of
average production output rather than of individual products and
it can’t be tested on a product.
1st Tier suppliers shall be included other suppliers may be included
via signed declarations.
27
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
28 Merci pour votre attention!
Bram Soenen
Conseiller scientifique
SPF Santé publique, Sécurité de la Chaîne alimentaire et Environnement DG Environnement (DG5)
Division politique de produits et Chemicals (DPPC)
Politique de produits
Place Victor Horta 40 boite 10,
1060 Bruxelles
tel +32 (0) 2 524 96 92
SPF SANTE PUBLIQUE, SECURITE DE LA CHAINE ALIMENTAIRE ET ENVIRONNEMENT
29 Documentation • Documents de travails, plans, rapports, lignes directives:
http://ec.europa.eu/energy/efficiency/labelling/household_en.ht
m
http://ec.europa.eu/enterprise/policies/sustainable-
business/ecodesign/
• Propositions finales:
http://ec.europa.eu/enterprise/tbt/
• Propositions votées:
http://ec.europa.eu/transparency/regcomitology/index.cfm
http://ec.europa.eu/transparency/regexpert/
• Législation publiées:
http://eur-lex.europa.eu/