Download - Elan Inventa Katalog 2014 STOLI En
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
1/32
First Edition Magazine | 1
SEATING SYSTEMSD ES IG N ED , EN G IN E ER ED A N D M A N U F A C T U R ED B Y EL A N .
WWW.ELAN-INVENTA.COM
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
2/32
2 | Magazine First Edition1 | Seating systems Elan Inventa
ELAN SEATING SYSTEMS ARE DESIGNED, ENGINEERED AND MANUFACTURED TO COMPLEMENT THE ARCHITECTURE OF THE VENUE WHERE THEY AREINSTALLED. THEY ARE MANUFACTURED TO THE HIGHEST
REGULATIONS IN STANDARDS.
An important place among ourreference projects is taken up by the5,500-seat Zlatorog Sports Hall inCelje, Slovenia, equipped with ElanInventa’s telescopic and fixed stands,handball goals and protection net-ting, all manufactured to the Europeanstandards applicable to the halls host-ing top sporting events. The hall hasalready hosted the 2004 EuropeanHandball Championship and Eurobas-ket 2013.
With its 6,500 seats, the BorisTrajkovski Sports Hall in Skopje, isthe largest sports hall in Macedonia.It is equipped with telescopic stands,sports flooring, seats and other sportsequipment.
For the Malmö Arena in Sweden Elan Inventa supplied telescopicstands with 2,500 seats. The Arenahas a capacity of 12,000 for sportingevents and up to 15,000 for concerts.
The Spaladium Hall in Split, Croa-
tia, hosted the World Men’s HandballChampionship in 2009. Elan Inventadelivered telescopic stands, dividingcurtains, wooden sports floors, and
other equipment. All the equipment inthe hall is IHF and FIBA certified.
ELANSEATINGSYSTEMS
Multi-tiered seating systems are an essential part of all eventvenues (sports halls, stadiums, theatres, conference halls, lecturerooms, cinema thatres) as they provide spectators with high-quality, safe, and comfortable seating, as well as a good line ofsight.Our seating systems can accommodate a wide range of seatoptions varying in model and type. In close consideration of thespatial and technical possibilities of each facility, Elan Inventaseating systems support the products of the world's leading
seating manufacturers.
LEIPZIG GERMANY
ELAN INVENTA | Our success stories
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
3/32
First Edition Magazine | 3Elan Inventa Seating systems | 2
over 2,000 seating places.
Since spring 2013 Leipzig, Ger-many, boasts the most advancedtelescopic seating system in Europe,called TransFlex. The stands, fullydeveloped by Elan Inventa, feature
complex technical solutions and meetthe high requirements of the Germanmarket for quality, execution, anddesign.
T IMRA SWEDEN
The telescopic stands for theStožice Arena, Ljubljana, Slovenia were one of Inventa’s biggest projectsboth in terms of complexity as wellas scope and project deadlines. Thecompany also provided other sportsequipment for this venue, with most
its products holding FIBA certificates.Stožice was the central venue of Euro-basket 2013.
Friends Arena in Sweden is oneof the most modern football stadiumsin the world. It complies with all thestandards for the organization of thebiggest sporting events. Elan suppliedand fitted the stadium with uniqueoutdoor grandstands, manufactured
to the most demanding standards foroutdoor use. Elan Inventa takes greatpride in the design and installation ofthese 20-row telescopic stands with
CABINET TIP & ROLL
TELESCOPIC
DEMOUNTABLE
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
4/32
4 | Magazine First Edition3 | Seating systems Elan Inventa
ARENA
• Configured to suit venue architecture and the custo-mers’ wishes.
• Arena telescopic stands feature corner system solu-tions, vomitories, standing places, press desks, partialopening/closing, and ventilation holes for enhanced aircirculation.
• Fully tailored to the wishes of the investor and designer,with a wide range of accessories and extras.
MAXIMISE THE NUMBER OF SEATS, AND THESPACE OCCUPIED BY THE STAND CAN BEUSED WHEN THE STAND IS CLOSED EITHERMANUALLY OR BY MEANS OF AN ELECTRICDRIVE.
TELESCOPIC STANDSTHE USEFUL SURFACE AREA INCREASES CON-
SIDERABLY WHEN THE STANDS ARE CLOSED.
Available in a variety of positions and attachment types:against a wall, under a balcony, self-standing. Conform tothe following regulations in standards:
• EN 13200, which specifies design and managementrequirements for spectator facilities at permanent andtemporary venues including sport stadia, sport halls,
and other indoor and outdoor facilities;• ISO 3834, which applies to controlled manufacture of
metal structures;• ISO 14001, which specifies environmental manage-
ment requirements;• and ISO 9001 for quality assurance in design, develop-
ment, production, supply, installation and servicing.
BASIC• The simplest telescopic stand unit.• The length of the block is 5 or 6 m, row depth 75 or 80
cm and riser 38 cm.• Seating is attached to the front end of the row.• Types of installation: against a wall, under a balcony.
PRO• Takes the classical telescopic stand a step further,
featuring a range of accessories and a variety of typesbest suited to the available space.
• Available accessories: electric drive, front and rear
guardrails, a variety of side covers,and a wide range ofseating options.
• Types of installation and attachment: against a wall,under a balcony.
PLANINA PRI SEVNICI SLOVENIA HOČE SLOVENIA
ARENA STOŽICE LJUBLJANA, SLOVENIA
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
5/32
First Edition Magazine | 5Elan Inventa Seating systems | 4
FULLY DEVELOPED BY ELAN, TRANSFLEX TELESCOPIC STANDS FEATURE COMPLEX TECHNICAL SOLUTIONS AND MEET THE HIGHREQUIREMENTS OF THE GERMAN MARKETFOR QUALITY, EXECUTION, AND DESIGN.
TRANSFLEX • Self-standing telescopic stands need no floor or wall
attachment.• In addition to easy storage, the bleachers are trans-
portable.• A seating block can be divided into two separate units.• Fitted with an internal staircase accessed from the rear.• Optional indoor bleachers with a telescopic staircase.
TEATRO• Telescopic seating for theatres, conference halls,
cinemas, lecture rooms with 75 to 95 cm row depth forenhanced comfort.
• All ends and contacts are rubber-capped to reducenoise.
• Available solutions include corner and concave sys-tems and feature ventilation holes, PVC or textile-co-vered platforms, and aisle lighting.
•
A wide range of upholstered seats with armrests and/ or desks; diverse railing options.
LJUBLJANA WALDORF SCHOOL LJUBLJANA, SLOVENIA
LEIPZIG GERMANY
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
6/32
6 | Magazine First Edition5 | Seating systems Elan Inventa
MINI BLEACHERS PROVIDE SEATING UP TO THREE ROWS. CAN BE ATTACHED TO A WALLOR TRANSPORTABLE, WITH AN INNOVATIVESTORAGE SYSTEM.
CABINET AND TIP&ROLL
BLEACHERS
CABINET• Designed, engineered and manufactured as an ideal
solution for small-size spectator facilities when availablespace prevents installation of larger stands.
• Modules, 2 m in length, can be placed next to each
other. Each module seats at least 12 persons.• A closed cabinet bleacher can be finished with an
acoustic panel or soft wall padding into an attractivewall panel, with no sharp edges, which adds to thesafety of the venue.
• Easy to handle.
TIP&ROLL• Free-standing metal structure with integrated casters
and an innovative storage system.• Intended for use in closed spaces (e.g. school gyms,
classrooms, multi-purpose rooms).• The bleacher is composed of 5 different wheeled mo-
dules of a total length 8.5 m.• Designed, engineered and manufactured to ensure
simple handling and economical storage.• A bleacher set is composed of 5 bleacher units of
different sizes (four seating blocks and a staircase)providing a seating area for 50 people.
VOJNIK SLOVENIA
SLOVENSKA BISTRICA SLOVENIA
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
7/32
First Edition Magazine | 7Elan Inventa Seating systems | 6
DEMOUNTABLE STANDS ARE FREE-STANDING METAL STANDS OF RATIONALSTRUCTURE, WHICH CAN BE ASSEMBLED ORDISASSEMBLED IN A VERY SHORT TIME.
DEMOUNTABLE
STANDS• Intended for use in outdoor sports venues and games
areas as well as indoor sports facilities, event venues,theatres, etc.
• Can be expanded to suit increased needs.
• The stand is manufactured to the requirements of SISTEN 13200-1, 2, 6, EN 191-1-1 Eurocode 1, EN 1991-1-4 Eurocode 1.
• Fully coated with anti-corrosion protection, the stand is
suitable for outdoor and indoor use.• Fitted with an innovative system for fast and simple as-
sembly and disassembly.• Seats are ergonomic, with our without backrest,
surface treated with UV protection, and tested to EN12727:01.
• UV protection, tested by the Slovenian National Civiland Engineering Institute in Ljubljana.BONIFIKA KOPER, SLOVENIA
LESCE SLOVENIA WORLD ROWING CHAMPIONSHIP BLED, SLOVENIA
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
8/32
8 | Magazine First Edition7 | Seating systems Elan Inventa
OUR SEATING SYSTEMS CAN ACCOMMODATE A WIDE RANGE OF SEAT OPTIONS VARYINGIN MATERIAL, MODEL AND TYPE. IN CLOSE CONSIDERATION OF THE TECHNICALPOSSIBILITIES OF THE SITE, ELAN INVENTA SEATING SYSTEMS SUPPORT THE PRODUCTSOF THE WORLD'S LEADING SEATING MANUFACTURERS.
OUR SEATING SYSTEMS INCLUDE A VARIETY OF SEAT TYPES AND VARIOUS COLOURSFOR ARCHITECT'S SELECTION. ALL SEATS SUPPLIED BY THE MANUFACTURER ARESTABLE AND SAFE, COMPLYING TO HIGH MATERIAL STANDARDS.
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
9/32
WWW.ELAN-INVENTA.COM
Elan Inventa Seating systems | 8
S E A T I N G
S Y S T E M S
F O R A L L E V
E N T
V E N U
E S
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
10/32
10 | Magazine First Edition
Telescopic stands Fixed stands
front mount rear mount toplatform
Bracket mount(verticalelement)
Bracket mount(horizontalelement)
9 | Seating systems Elan Inventa
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
11/32
First Edition Magazine | 11Elan Inventa Zgodba o športu | 1
COMPACTSTANDARD BENCH page 11
ERGO BENCH page 12
DAPLAST G3 page 13
DAPLAST A2 page 14
ESSENTIAL TABO page 15
DAPLAST A3 page 16
AUBA page 17
GOAL page 18
DAPLAST AB page 19
DAPLAST CR2 page 20
DAPLAST CR3 page 21
DAPLAST CR4 page 22
DAPLAST CR5 page 23
DAPLAST CRM page 24
STATEMENTBOX 901 page 26
BOX 903 page 27
BOX 908 page 28
DAPLAST AVATAR page 29
S E A T I N G
S Y S
T E M S
WWW.ELAN-INVENTA.COM
Elan Inventa Seating systems | 10
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
12/32
12 | Magazine First Edition
COMPACTSTANDARD BENCH• Standard bench is a flexible and elegant seating solu-
tion for closed spaces.• Suitable for use in fixed and telescopic stands.• Available in beech plywood, MDF, or laminated chip-
board.
CHARACTERISTICS
• Thickness 18 mm, all visible edges rounded to a 5 mm radius.• Fixed to the understructure with hot-zinc coated screw clamps.• Height of seating from 42 to 48 cm.• Width of seating from 28 to 30 cm.• Used in stands with row rise of 30 to 45 cm.• Used in stands with row depth of 75 to 90 cm.• Surface treated with DIN 4102 B1 flame retardant lacquer.• Conforms to EN 13200-3 and EN 913.
OPTIONS
• Available in beech plywood, MDF, or laminated chipboard.• Can be used in telescopic or fixed stands.• Upholstered seating surface.• Bench and upholstery fabric colour selection.• Optional foldable backrest.
11 | Seating systems Elan Inventa
STANDARD BENCHERGO BENCHDAPLAST G3DAPLAST A2
28 - 30 cm
4 2 - 4 8 c m
100 - 200 cm
m i n 6
c m
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
13/32
First Edition Magazine | 13Elan Inventa Seating systems | 12
ERGO BENCH• Standard bench upgraded with an ergonomic seat-
ing surface, without compromising on flexibility andelegance.
• Excellent seating solution for limited-space venues.
CHARACTERISTICS
• Manufactured from beech plywood, thickness 10 mm.• Laminated and fixed to the stand structure with hot-zinc coated
screw clamps.• Surface treated with DIN 4102 B1 flame retardant lacquer.• Conforms to EN 13200-3 and EN 913.• Height of seating from 42 to 48 cm.• Width of seating from 28 to 30 cm.• Used in stands with row rise of 30 to 42 cm.• Used in stands with row depth of 75 to 90 cm.
OPTIONS
• Attachment to the floor or stand (fixed or telescopic).• Available in a range of bench colours.
4 2
- 4 8 c m
m i n 6 c m
100 cm
28 - 30 cm
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
14/32
14 | Magazine First Edition
DAPLAST G3• A bench-style seat consisting of two parts – seats and
connection bridges – to form benches of any length.• For fixed and telescopic stands.
CHARACTERISTICS
• Seat moulded by injection in stabilised high-quality polymers.• Light resistance (anti-UV, EN 13200-4).• Resistance to severe public use (vandalism) (EN 12727:01 –
certified by Aidima).• Multiple central drainage.• Frame retardant (M4 to M2 class).• Two anchoring points, reinforced attachment to the base.• Used in stands with row depth of 75 cm to 90 cm.
OPTIONS
• Mounted directly on a riser or tread, or to the stand structure(fixed or telescopic).
• Seats available in a range of colours, and in any colour techni-cally available for orders of over 2500 units.
• Numbering at the sides of connecting bridges.
13 | Seating systems Elan Inventa
Standard colours:
Special colours:
45 / 50 cm
45 / 95 mm
45 mm
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
15/32
First Edition Magazine | 15Elan Inventa Seating systems | 14
DAPLAST A2• A simple seating solution for all types of venues, in-
cluding high-volume venues.• Excellent resistance to wear and load.• Sealed around the entire perimeter to prevent dirt from
accumulating inside the seats, and for easy cleaning.
CHARACTERISTICS
• Seat moulded by injection in stabilised high-quality polymers.• Light resistance (anti-UV, EN 13200-4).• Resistance to severe public use (vandalism) (EN 12727:01 –
certified by Aidima).• Central drainage system.• Frame retardant (M4 to M2 class).• Single anchoring point, reinforced attachment to the base.• Used in stands with row depth of 75 to 90 cm.
Standard colours:
Special colours:
OPTIONS
• Mounted directly on a riser or tread, or to the standstructure (fixed or telescopic).
•
Seats available in a range of colours.• Manufactured in any colour technically available for
orders of over 2500 units.• Numbering in the upper part of the backrest.
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
16/32
16 | Magazine First Edition
TABODAPLAST A3
AUBA GOALDAPLAST ABDAPLAST CR2DAPLAST CR3DAPLAST CR4DAPLAST CR5DAPLAST CRM
ESSENTIAL TABO• Multipurpose wooden seat made of durable plywood,
intended for medium and large-sized indoor venues.• Fixed or tip-up seat.• Mounted on a central leg or directly to the stand.
CHARACTERISTICS
• Folding wooden seat.• Tip-up backrest attached to metallic brackets.• Seat and backrest plywood thickness 10 mm.• Surface treated with DIN 4102 B1 flame retardant lacquer.• Conforms to EN 13200-3 and EN 913.• Axial seat spacing 46 to 50 cm.• Seats are connected for tier folding.• Used in stands with row rise from 28 to 40 cm.• Minimum row depth 80 cm.
15 | Seating systems Elan Inventa
45 - 50 cm 42 - 46 cm
4 2 - 4 8
c m
5 0 c m
1 8 c m
12 cm
OPTIONS
• Suitable for installation in fixed or telescopic stands.• Seats with support leg can be attached to any surface type.• Mounted to the front or rear of telescopic stand platform.• Upholstered with durable, flame-retardant fabric (minimum
80,000 double rubs).• Available in a range of seat and upholstery fabric colours.• Upholstered in accordance with EN 1021-1 (ignitability of materi-
als).
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
17/32
First Edition Magazine | 17Elan Inventa Seating systems | 16
DAPLAST A3• Top-range solution for seating systems in high-volume
venues.• Excellent resistance to wear and load.• Sealed around the entire perimeter to prevent dirt from
accumulating inside the seats, and for easy cleaning.
CHARACTERISTICS
• Double-wall backrest.• Ergonomic backrest 35 cm in height, with lumbar support.• Conforms to UEFA and FIFA recommendations.• Central drainage system.• Light resistance (anti-UV, EN 13200-4).• Resistance to severe public use (vandalism) (EN 12727:01 –
certified by Aidima).• Two anchoring points; reinforced attachment to the base.
Standard colours:
Special colours:
OPTIONS
• Mounted directly on a riser or tread, or to the standstructure at any height.
•
Available in a range of standard seat and upholsteryfabric colours, or in any technically available colour fororders above 2500 units.
• Numbering plates in the upper part of the backrest.
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
18/32
18 | Magazine First Edition17 | Seating systems Elan Inventa
AUBA • A durable, multipurpose seat with a reliable automatic
up-down mechanism.• Available in fixed or tip-up seat option.• Can be mounted directly on the stand.
CHARACTERISTICS
• Folding wooden seat.• Automatic flip-up seat surface attached to metallic brackets.• Plywood thickness 10 mm.• Surface treated with DIN 4102 B1 flame retardant lacquer.•
Conforms to EN 13200-3 and EN 913.• Axial seat spacing from 46 to 50 cm.• Opens and folds automatically.• Front attachment to the telescopic stand platform.
45 - 50 cm
44 cm
4 2
- 4 8 c m
47 cm
42 cm
4 0 - 4 6 c m
6 - 1 2 c m
1 1 - 1 6 c m
OPTIONS
• Suitable for use in telescopic or fixed stands.• Upholstery fabric rated at minimum 30,000 double rubs.• Available in a variety of seat and upholstery colours.• Available as a tip-up seat.• Optional fixed backrest.
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
19/32
First Edition Magazine | 19Elan Inventa Seating systems | 18
GOAL• Heavy duty, multipurpose leg-supported seat.• Available in a fold-down option.• Suitable for medium- and large-sized indoor venues.• Can be mounted on a central leg support.
CHARACTERISTICS
• Folding wooden seat on a support leg.• Automatic flip-up seat surface attached to metallic brackets.• Plywood thickness 10 mm.• Width of seating from 42 to 47 cm.• Surface treated with DIN 4102 B1 flame retardant lacquer.• Conforms to EN 13200-3 and EN 913.• Axial seat spacing from 50 to 55 cm.• Linked together for easier fold-down.• Upholstery fabric rated at minimum 80,000 double rubs, EN
1021-1 compliant.• Used in stands with row depth of 75 to 90 cm.
OPTIONS
• Available in a range of seat and upholstery fabric colours.• Backrest can be custom embroidered with the client’s logo.• Numbering plates on the backrest.
23 cm
50 - 55 cm 42 - 47 cm
8 2 - 8 8 c m
4 2 - 4 8 c m
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
20/32
20 | Magazine First Edition19 | Seating systems Elan Inventa
DAPLAST AB• Foldable multipurpose seat ideal for sports and other
venues.• Fitted with a counterweight mechanism for automatic
lifting.• Can be mounted on a riser or floor, support leg, or
stand structure.
CHARACTERISTICS
• Seat and backrest from smooth material that prevents accumula-tion of dirt.
• Fitted with a weight-loaded mechanism for automatic fold-up.• Reinforced seat folds made by injecting a fibreglass-reinforced
polymer substance.• Load-bearing structure made of cold-laminated S275 steel and
hot galvanized or cataphoretic coating.• Light resistance (anti-UV additive, EN 13200:4)• Resistance to severe public use (vandalism) (EN 12727:01 – certi-
fied by Aidima).• Flame retardant (M4 to M2 norm).
Standard colours:
Special colours:
OPTIONS
• Spring-loaded fold-up mechanism.• Oven-painted frame.• Mounted on a riser or floor, or stand structure.• Available in a range of seat and upholstery fabric co-
lours, or in any technically available colour for ordersabove 2500 units.
• Numbering plates.• Armrests attached to backrests.• Upholstered seat and backrest, optional embroidery.• Optional writing pad.
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
21/32
First Edition Magazine | 21
DAPLAST CR2• A heavy–duty seat with mid-height backrest for con-
ventional grandstands and multipurpose venues.• Sealed around the entire perimeter to prevent dirt
from accumulating inside the seats, and for easycleaning.
CHARACTERISTICS
• Seat moulded by injection of stabilized high-quality polymers.• Light resistance (anti-UV additive, EN 13200:4)• Resistance to severe public use (vandalism) (EN 12727:01 –
certified by Aidima).• Central drainage.• Flame retardant (M4 to M2 class).• One central anchoring point reinforced with a small steel plate.Standard colours:
Special colours:
Elan Inventa Seating systems | 20
OPTIONS
• Mounted directly on a riser or tread, or to the standstructure at any height.
• Available in a range of seat and upholstery fabriccolours, or in any technically available colour for ordersabove 2500 units.
• Numbering plates in the upper part of the backrest.• Attachment can be upgraded by two or three anchoring
points anchored at the seat base.• Armrests (individual or collective).
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
22/32
22 | Magazine First Edition
DAPLAST CR3• High-backrest heavy-duty seat ideal for conventional
grandstands.• Sealed around the entire perimeter to prevent dirt from
accumulating inside the seats, and for easy cleaning.
CHARACTERISTICS
• Seat moulded by injection of stabilized high-quality polymers.• Light resistance (anti-UV additive, EN 13200:4)• Resistance to severe public use (vandalism) (EN 12727:01 –
certified by Aidima).•
Central drainage.• Flame retardant (M4 to M2 class).• Two anchoring points, reinforced attachment at the seat base.• Manufactured in line with UEFA and FIFA recommendations.
21 | Seating systems Elan Inventa
Standard colours:
Special colours:
OPTIONS
• Mounted directly on a riser or tread, or to the standstructure at any height.
• Available in a range of seat and upholstery fabric colours,or in any technically available colour for orders above2500 units.
• Numbering plates in the upper part of the backrest.• Armrests (individual or collective).
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
23/32
First Edition Magazine | 23Elan Inventa Seating systems | 22
DAPLAST CR4• High-backrest heavy-duty seat suitable for all types of
grandstands.• Sealed around the entire perimeter to prevent dirt from
accumulating inside the seats, and for easy cleaning.
CHARACTERISTICS
• Seat moulded by injection of stabilized high-quality polymers.• Light resistance (anti-UV additive, EN 13200:4)• Resistance to severe public use (vandalism) (EN 12727:01 –
certified by Aidima).• Central drainage.• Flame retardant (M4 to M2 class).• One central anchoring point at the base, reinforced with a steel
plate.• Manufactured in line with UEFA and FIFA recommendation.
Standard colours:
Special colours:
OPTIONS
• Mounted directly on a riser or tread, or to the standstructure at any height (metal or plexiglass).
• Available in a range of seat and upholstery fabric co-lours, or in any technically available colour for ordersabove 2500 units.
• Numbering plates in the upper part of the backrest.
• Armrests (individual or collective).• Upholstered seat and backrest with optional engrav-
ing.• Backrest can be custom embroidered with logo.
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
24/32
24 | Magazine First Edition
DAPLAST CR5• Monoblock seat with high backrest, ideal for first-class
sports venues.• Specially designed for narrow tread venues requiring
backrest seats.•
Aesthetically pleasing with modern design.
CHARACTERISTICS
• Seat moulded by injection of stabilized high-quality polymers.• Light resistance (anti-UV additive, EN 13200:4)• Resistance to severe public use (vandalism) (EN 12727:01 –
certified by Aidima).•
Central drainage.• Flame retardant (M4 to M2 class).• One central anchoring point, reinforced with a steel plate.
23 | Seating systems Elan Inventa
Standard colours:
Special colours:
OPTIONS
• Backrest can be custom embroidered with the cli-ent’s logo (metal or plexiglass).
• Available in a range of seat and upholstery fabric co-lours, or in any technically available colour for ordersabove 2500 units.
• Numbering plates in the upper part of the backrest.• Armrests (individual or collective).• Attachment can be upgraded by two or three an-
choring points anchored at the seat base.
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
25/32
First Edition Magazine | 25Elan Inventa Seating systems | 24
DAPLAST CRM• High-backrest heavy-duty seat suitable for large
sports arenas and narrow-tread grandstands.• Aesthetically pleasing with modern design.
CHARACTERISTICS
• Seat moulded by gas-assisted injection of stabilized high-quality poly-mers.
• Light resistance (anti-UV additive, EN 13200:4)• Resistance to severe public use (vandalism) (EN 12727:01 – certified
by Aidima).• Backrest with tubular air chambers, with no reinforcement nerves vis-
ible at the back, provides all the benefits of a double-back seat.• Central drainage system.• Flame retardant (M4 to M2 class).• One central anchoring point, reinforced with a steel plate.• Manufactured in line with UEFA and FIFA recommendations.
Standard colours:
Special colours:
OPTIONS
• Mounted directly on a riser or tread, or to the standstructure at any height (metal or plexiglass).
• Available in a range of seat and upholstery fabric co-lours, or in any technically available colour for ordersabove 2500 units.
• Numbering plates in the upper part of the backrest.•
Armrests (individual or collective).• Attachment can be upgraded by two or three an-choring points anchored at the seat base.
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
26/32
26 | Magazine First Edition25 | Seating systems Elan Inventa
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
27/32
First Edition Magazine | 27
STATEMENT
Elan Inventa Seating systems | 26
BOX901• Compact design and ergonomic form for long service
life and low installation and maintenance costs.
CHARACTERISTICS
• Seat and back come with a 5-year UV resistance colour certifi-cate.
• Components moulded using recognised quality polymers.• All materials are UV & FR rated as required.• Compact seat width for high volume installation.• Strength and durability tested.• TBS rail available in galvanised and powder-coated finish.• Various installation options (riser mount, tread mount).• Soft-action for tip-up mechanism.
BOX 901BOX 903BOX 908DAPLAST AVATAR
OPTIONS
• Also available in upholstered version.• Cupholders.• Armrests.• Choice of plastic and upholstery fabric colours.
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
28/32
28 | Magazine First Edition27 | Seating systems Elan Inventa
BOX 903• Due to its compact form, Model 903 is particularly
suited for high volume installations.• A raised seat takes up very little space and enables the
flow of spectators.
CHARACTERISTICS
• Seat and back come with a 5-year UV resistance colour certifi-cate.
• Components moulded using recognised quality polymers.• All materials are UV & FR rated as required.• Compact seat width for high volume installation.• Strength and durability tested.• TBS rail available in galvanised and powder-coated finish.• Lens-protected numbering system.• Various installation options (riser mount, tread mount).• Soft-action for tip-up mechanism.
OPTIONS
• Cupholders.• Armrests.• Plastic colour selection.
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
29/32
First Edition Magazine | 29Elan Inventa Seating systems | 28
BOX908• The BOX Seat 908 is the ideal solution for superior seated
comfort.• Integrates the cushion into the seat, and protects seat
edges from wear.•
Designed to incorporate all aspects of comfort.
CHARACTERISTICS
• Upholstered mid–height seat.• Exclusive maintenance-free materials.• All components are moulded using recognised quality poly-
mers.•
All materials are UV & FR rated as required.• Compact seat width for high volume installation.• Strength and durability tested.• TBS rail available in galvanised and powder-coated finish.• Various installation options (riser mount, tread mount).• Soft-action tip-up mechanism.
OPTIONS
• Cupholders.• Padded armrest.• Plastic colour selection.
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
30/32
30 | Magazine First Edition29 | Seating systems Elan Inventa
DAPLAST AVATAR• Modern tip-up seat for the most-demanding venues.• Rail mounted to accommodate any desired spacing be-
tween seats.• Compact fold-up form optimises the available distance
between seats.
CHARACTERISTICS
• Seat and back made from smooth material to prevent dirtfrom accumulating.
• Seat made from high-quality polyamide reinforced with high-resistance fibreglass.
• Mounted on top-quality steel rails and hot galvanised orepoxy coating.
• Light resistance (anti-UV, EN 13200-4).• Resistance to severe public use (vandalism) (EN 12727:01 –
certified by Aidima).• Central drainage system.• Frame retardant (M4 to M2 norm).• Manufactured in line with UEFA and FIFA recommendations.
OPTIONS
• Can be mounted onto the floor or the stand structure.• Seats available in a range of colours, and in any colour tech-
nically available for orders of over 2500 units.• Shock absorbers incorporated in the tip-up mechanisms.• Padding.• Armrest.
45 - 50 cm44,5 cm
19 cm
4 2 - 4 5 c m
Standard colours:
Special colours:
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
31/32
First Edition Magazine | 31Elan Inventa Seating systems | 30
-
8/18/2019 Elan Inventa Katalog 2014 STOLI En
32/32
ELAN INVENTA D.O.O.Begunje na Gorenjskem 14275 Begunje na GorenjskemSlovenia
Tel +386 4 53 51 333Fax +386 4 53 51 107Email [email protected]
www.elan-inventa.comwww.elan-seatingsystems.eu
WWW.ELAN-INVENTA.COM