In-line 3D automated X-ray inspection systemfor PCB inspection
BF-X3Visualize the inner structure and achieve an innovative automated inspection
External View
2250 m
m
2308 m
m
1820 mm
1460 m
m
1880 m
m
(714 mm)
900 m
m
487 mm
■ Top View
■ Front View
■ Side View
Product Specifications
Model Name BF-X3
Resolution 12 to 29 μm
PCB Size 50 x 100 to 460 x 510 mm(1.97 x 3.94 to 18.11 x 20.08 in.)
PCB Thickness 0.5 to 4.0 mm (0.02 to 0.16 in.)
PCB Warp +/- 2 mm (0.08 in.)
Component Height Top: 40 mm (1.57 in.), Bottom: 40 mm (1.57 in.)
Inspection Categories • Surface Mount DeviceNon Wetting, Head in Pillow(HIP), Filet defect, Lifted lead, Lifted component, Excess and insufficient solder, Missing component, Flipped component, Tombstone, Shifted component, Bridge, Void, PAD shape, Foreign material, Co-planarity• IGBT DeviceVoid inspection of a solder
3D Capturing Speed (Planar CT)* Approx. 5 sec./FOV
Detector Flat panel, 14 bit, 3M Pixel
X-ray Tube 130 kV, 16 W, Close X-ray Source
X-ray Leakage 0.5 μSV/h or less
Conveyor Method Flat Belt Transfer
Conveyor Height 880 to 920 mm (34.65 to 36.22 in.)
Width Adjustment Automatic
Operating System Windows 7 English Version* It may change according to capturing settings.
System Requirements
Electric Power Three Phase ~ 400 V +/-10 %, 50/60 Hz
Power Consumption 7 kVA
Air Requirement 0.5 MPa, 60 L/min (ANR)
Usage Environment 15 °C (59 °F) to 30 °C (86 °F) / 15 to 80 % RH (Non-condensing)
DimensionsW x D x H
1820 x 2250 x 1880 mm(71.65 x 88.58 x 74.02 in.)
Weight Approx. 5300 kg
Optional Systems
Repair Terminal
Offline Teacher System
Global Networkhttp://www.sakicorp.com
E-mail:[email protected]
株式会社サキコーポレーション
本社〒142-0053
東京都品川区中延4-14-7 小川ビル
TEL:03-5788-6280 FAX:03-5788-6295
西日本営業所〒651-0087
兵庫県神戸市中央区御幸通4-2‐20 三宮中央ビル7階
TEL:078-291-5210 FAX:078-291-5220
E-mail:[email protected]
Saki CorporationSaki CorporationHeadquartersOgawa Building, 4-14-7, Nakanobu,Shinagawa-ku, Tokyo, Japan, 142-0053TEL: +81-3-5788-6280 FAX: +81-3-5788-6295
Global Networkhttp://www.sakicorp.com
This flyer was made out in March 2014.SJ341DCF1-03E
© 2014 Saki Corporation. All Rights Reserved.
Specifications contained in this flyer are subject to change without notice.
3D X-ray becomes major solution in SMT inspection.
BF-X3 is equipped with a new generation of high resolution flat panel detector. FOV area becomes three times larger compared to previous model without compromising resolution conditions.As a result, BF-X3 has significant faster throughput and is the ideal solution for in-line inspection.
Improve the cycle time dramatically
BF-X3 i s a un ique 3D X- ray inspection system which inspects not only soldering of BGA, LGA and QFN but also Chip, Lead IC, PTH and most used components on PCB. 3D X-ray is the suitable technology to reconstruct the shape of solder ball and fillet accurately, and to real ize re l iable solder inspection.
Broaden the range of inspection objects
New Technology
Our unique technology “Planar CT” enables to make high-precision 3D data
Saki’s unique “Planar CT Technology” analyzes the internal structures of planar objects. The detector moves parallel with the planar object capturing images from various directions. By using these diagonal images, it calculates the tomographic views of the planar object quickly and accurately. By the unique movement which both the detector and the objects moves parallel, it enables to correct the position reflecting to create high resolution image by less images taken.
The Revolution of 3D X-ray High Speed inspection.
BF-X3In-line 3D automated X-ray inspection system for PCB inspection
Saki changes 3D X-ray inspection system to become a one of the common equipments in any SMT line.Based on our planar CT technology, SAKI Corporation have implemented a new high-resolution detector and a new CT calculation method for PCBA inspection. These improvements leads to much faster throughput compared with previous models.SAKI proudly introduces BF-X3 machine which sets a new inspection standard for PCBA inspection.
Three strengths useful in production site
Automated high-resolution 3D measuring technologyEnables to detect the defects by using the high quality image.
Reliable hardware designAchieved both machine safety and easy maintenance.
Worldwide serviceWe are offering satisfactory supports all over the world.
Technology
Automated high-resolution 3D measuring technologyHardware
Reliable hardware design
Global Support
Worldwide service
By using high-accuracy 3D data of Planar CT, BF-X3 is capable to capture various defects with 3D configuration.
Automated inspection completely separates top and bottom of the board, corrects position gap and warpage based on board pattern, and
measures/classifies defects such as dryjoint and void.
Measuring various defects by using high resolution CT dataSaki employed special and/or customized high-
resolution Closed X-ray tube among micro
focus X-ray tubes. The size, volume, and defect
point of the object is measured from the 3D
data of planar CT.
Based on these, BF-X3 measures the
dimension of each component.
BF-X3 has superb inspection ability for various
inspections such as electronic components
inspection, soldering inspection, void inspection
in microscopic pore, Head in Pillow (non-
wetting) and multi-layer soldering inspection for
power modules.
Achieves further efficiency by the peripheral systems
The operator is able to check the defects in 3D view on external PC. The optional “Repair terminal” shows
inspected points in 3D movies. Using the mouse, you will feel like having a good look of invisible parts as
though they are in your hands. Also, the “Offline teacher system” provides inspection data automatically
from CAD data. Based on our abundant AOI experience, we designed this system to accommodate to
both high-mix and high-volume production.
Integrate 3D reconstruction and its view to implement the analysis and automated inspection at the same time
All automatic inspection is practiced by high-resolution
3D data. The high resolution image of the defect is
shown immediately. Now, there is no further need to
check the defective points by analytical equipments.
This is enabled by the software for precise machine
control, 3D reconstruction, 3D inspection, 3D view which
are all developed by Saki.
Seamless 3D data which improves inspection efficiency
Planar CT has h igh resolut ion in both
horizontal and vertical direction. This will not
be affected by back side mounting because of
its capability to separate surface and back side
completely. Also, it can capture the warpage
of a PCB and joint images completely and
correct those automatically by the optimal
combination of both the imaging principle and
CT reconstruction principle. Even though the
original data is FOV images, the achieved 3D
data is seamless.
We achieved smooth connection of joint
areas, which contributes to speeding up, and
enlargement of viewing field. Inspection of
large parts could also be easily done.
High-resolution closed X-ray tube
BF-X3 is equipped with a 130kV closed X-ray tube. This 16W high output tube has very small focal spot size which
enables to acquire best on the market high-definition images. High reliability combined with auto conditioning and
self diagnostic function ensure tube long life time.
Prolonged stability and high rigidity gantry structure
In order to control the detector and object in submicron accuracy and millisecond speed, we developed a high
rigidity two-layer gantry structure which combines granite plate and linear motors. Its mechanism provides high
reliability, with long-term stability which sustains the high resolution Planar CT calculation.
High safety based on European standards
BF-X3 is possible to keep X-ray dosage stable and start inspection quickly by the combination of 3 shutters placed
in PCB entrance, exit, and X-ray infestation site. Due to these shutters, it secures safety and at the same time
provides quick inspection as it doesn’t need to stop X-ray source during plate carry-in and carry-out.
It is designed to meet European standard which shows that the X-ray leakage dose must be lower than 0.5 μSv/h
considering operator’s safety.
We provide quick service and support all around the world using 15 of our worldwide network which currently supports 7000 AOI machines.
Various measurement examples
Head in Pillow
3D
Sl ice
Less Solders
3D
Sl ice
Void
3D
Sl ice
Through Hole
3D
Sl ice
Separate the surface image from the transfer
imaging of the whole board
Enables to inspect without any influence
from mount condition of flip side