Download - Mesauring Hydro Turbines
-
8/16/2019 Mesauring Hydro Turbines
1/8
• Shaft static plumbness
• Shaft runout
• Thrust bearing levelness and flatness
• Bore alignment
Measuring hydro turbinesInnovative solutions for installation,
overhaul and maintenance of hydro turbines
-
8/16/2019 Mesauring Hydro Turbines
2/8
Scalable system – Services by the experts
Time-efficient measurement method
Traditional methods for the geometry measurement of
hydro turbines, such as gauges and plumb lines, require
time-consuming preparations. Compromises with the
accuracy and repeatability of measurement results are
commonly necessary.
With the ROTALIGN® Ultra laser alignment platform,
PRUFTECHNIK offers a state-of-the art, versatile
measurement system for the assembly and maintenance
of hydro turbines. With innovative measurement
methods, the system covers many requirements for
turbine geometry and eliminates lengthy preparations.
Results management is also greatly simplified using the
reporting function within the powerful ALIGNMENT
CENTER PC software.
-
8/16/2019 Mesauring Hydro Turbines
3/8
Alternatively, INCLINEO® can also measure the levelness and
flatness of components and foundations quickly and easily,
along with straightness and orthogonality.
Measuring hydro turbines
Levelling and surface flatness during assembly
A flexible system for many measurement tasks
ROTALIGN® Ultra is the platform for a wide range of
applications, such as determining straightness and surface
flatness, vertical alignment, rotary axial alignment and much
more.
The sensors communicate wirelessly with the control unit
via Bluetooth®. The self-levelling, highly accurate LEVALIGN®
expert laser can be used to measure the level and flatness of
large foundations and flanges with great accuracy.
-
8/16/2019 Mesauring Hydro Turbines
4/8
Prolong bearing service life
Bore alignment
Misaligned bearings tend to distort the shaft. Significant
vibration and high bearing temperatures are the result.
Larger displacements will even damage the running surfaces
of the bearings. This significantly reduces the efficiency of
the turbine.
The CENTRALIGN® Standard application can be used to
measure vertical and horizontal bores quickly and accurate-
ly. Bearing corrections can be monitored in real-time. The
flexible modular system allows virtually all bore and shaft
diameters to be measured.
-
8/16/2019 Mesauring Hydro Turbines
5/8Measuring hydro turbines
The ultimate precision for shafts
Shaft plumbness and runout
The ROTALIGN® Ultra Hydropower application on the
ROTALIGN® Ultra platform delivers all important alignment
parameters of the shaft assembly. The measurement system
does not require any visual connection between the individual
measuring points:
Static vertical alignment of shafts Runout of shafts Levelling and surface flatness of the thrust and axialbearings
-
8/16/2019 Mesauring Hydro Turbines
6/8
Shorter installation and overhaul time
End-to-end turbine alignment
With over 25 years of experience in developing, manufac-
turing and applying laser-based measurement systems for
industrial applications, PRUFTECHNIK offers a range of spe-
cialized systems and services dedicated to serve the complex
measurement needs in hydropower plants.
Our comprehensive worldwide sales, service and support
network means that we are always close to our customers
anywhere in the world.
-
8/16/2019 Mesauring Hydro Turbines
7/8
Perfection all the way up
Overview of applications
Adjustment of upper, thrust and lower bearings, vertical alignment
of turbine shaft
Bore alignment with CENTRALIGN® Standard
Shaft plumbness with ROTALIGN® Ultra Hydropower Shaft runout with ROTALIGN® Ultra Hydropower
Assembly of bearing shell with shaft seal
Bore alignment with CENTRALIGN® Standard
Installation of impeller between top and bottom cover
Flatness measurement and levelling with
LEVALIGN® expert or INCLINEO®
Assembly of wicket gate with top and bottom cover
Surface flatness and levelling with INCLINEO® or LEVALIGN® expert
Bore alignment between top and bottom coverwith CENTRALIGN® Standard
Spiral case assembly
Levelling with INCLINEO®
Assembly and adjustment of the outflow pipe
Surface flatness and levelling of flange and foundation
with LEVALIGN® expert or INCLINEO®
A s s e
m b l y f r o m b
o t t o
m t
o t o p
Measuring hydro turbines
-
8/16/2019 Mesauring Hydro Turbines
8/8
D O C 9
9 . 4
0 2 . 0
9 . 1
4 . e n
PRÜFTECHNIK
Alignment Systems GmbH
Freisinger Str. 34
85737 Ismaning, Germany
Tel.: +49 89 99616-0Fax: +49 89 99616-100
www.pruftechnik.com
A member of the PRUFTECHNIK group
CENTRALIGN®, INCLINEO®, LEVALIGN® and ROTALIGN® are registered trademarks of PRUFTECHNIK Dieter Busch AG. No copying or reproduction of this information, in any form
whatsoever, may be undertaken without express written permission of PRUFTECHNIK Dieter Busch AG. The information contained in this leaflet is subject to change without
further notice due to the PRUFTECHNIK policy of continuous product development. PRUFTECHNIK products are subject to patents granted or pending throughout the world. ISO
9001:2008 certified. © Copyright 2014 by PRUFTECHNIK Dieter Busch AG.
Alignment Systems Condition Monitoring Nondestructive Testing Service & Support
Proven technology for all industries
PRUFTECHNIK
PRUFTECHNIK delivers maintenance solutions worldwide
With our products, processes and services for alignment
applications, condition monitoring and availability optimiza-
tion, we help ensure that your machines run smoothly and
generate an output of consistently high quality. This also
includes systems for automatic process control and quality
assurance that are integrated directly in your production
process.
We offer professional servi-
ces anywhere in the world tosupport our customers with
alignment and condition
monitoring.
Laser measurement systems
and services for optimumalignment of machines and
systems.
Vibration measurement sys-
tems for machine conditionmonitoring – including ser-
vices such as machinery fault
diagnosis.
Systems and services for
quality assurance and pro-cess control in production.
Known Consignor inair cargo transport withLBA registration no.DE/KC/00802- 01/0218 +
DE/KC/00802 - 02/0218
www.pruftechnik.com
P R O V E N Q U A L I T Y
Made in Germany
Global Presence
Qualified Support
Quality Service
LASER RADIATION
CLASS 2 LASER PRODUCTIEC 60825-1:2007
P< 1mW, pulse < 400µs, λ=630-680nmComplies with 21 CFR 1040.10
and 1040.11 except for deviations pursuant to Laser Notice No. 50,
dated June 24, 2007
DO NOT STAREINTO BEAM