Download - RIAD AQUA/10X10
AQUAReference:
Thickness:
10X10Size: cm
mm
RIAD AQUA/10X10Model:
26047
RIAD AQUA/10X10
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Water absorption
EN ISO-10545-3 > 10%Water absorption
Dimensional characteristics
EN ISO-10545-2 > 95%Surface quality
EN ISO-10545-2 +0,5/-0,3% +2,0/-1,5 mmCurvature flatness
EN ISO-10545-2 ± 10% / ± 0,5 mmThickness
EN ISO-10545-2 ± 0,5 % / ± 2,0 mmLength and Width
EN ISO-10545-2 ± 0,5% / ± 2,0 mmRectangularity
EN ISO-10545-2 ± 0,3 % / ± 1,5 mmStraightness of sides
Mechanical characteristics
EN ISO 10545-11 PassCrazing resistance
EN ISO 10545-9 PassThermal shock resistance
EN ISO-10545-4 > 600 NBreaking strength
EN ISO-10545-4 > 12 N/mm2Modulus of rupture
Surface characteristics
EN ISO 10545-7 -Visible failure at No of revolutions
EN-101 3Surface scratch resistance
Chemical characteristics
EN ISO-10545-13 GHA/GHA/GHAHigh concentrations of acids and alkalis
EN ISO-10545-13 GLA/GLA/GLALow concentrations of acids and alkalis
EN ISO-10545-13 GA/GAHousehold chemicals and swimming pool salts
EN ISO-10545-14 5/-/5/5Stain resistance
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
AQUAReference:
Thickness:
10X10Size: cm
mm
RIAD AQUA/10X10Model:
26047
RIAD AQUA/10X10
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Non-slip characteristics
DIN-51130 -Critical angle (footwear)
004CPR2017-08-01CE Declaration of Performance:
CE MARKING
Página 2 de 2
Before laying the tiles, check the shade, calibre and quality. No claims will be accepted once the tiles have been laid. Leave a tile joint of at least 0.5 mm in the case of rectified tiles and1.5 mm for non-rectified ones. The tile colour shown in this data sheet is merely indicative and it might differ from the real tile colour. This document is purely for sales purposes and itcannot be used in any legal or administrative proceedings, in a witness statement, or as documentary proof without the express permission of PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012
AQUAReference:
Thickness:
6,5x20Size: cm
mm
RIAD AQUA/6,5X20Model:
26077
RIAD AQUA/6,5X20
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Water absorption
EN ISO-10545-3 > 10%Water absorption
Dimensional characteristics
EN ISO-10545-2 > 95%Surface quality
EN ISO-10545-2 +0,5/-0,3% +2,0/-1,5 mmCurvature flatness
EN ISO-10545-2 ± 10% / ± 0,5 mmThickness
EN ISO-10545-2 ± 0,5 % / ± 2,0 mmLength and Width
EN ISO-10545-2 ± 0,5% / ± 2,0 mmRectangularity
EN ISO-10545-2 ± 0,3 % / ± 1,5 mmStraightness of sides
Mechanical characteristics
EN ISO 10545-11 PassCrazing resistance
EN ISO 10545-9 PassThermal shock resistance
EN ISO-10545-4 > 600 NBreaking strength
EN ISO-10545-4 > 12 N/mm2Modulus of rupture
Surface characteristics
EN ISO 10545-7 -Visible failure at No of revolutions
EN-101 3Surface scratch resistance
Chemical characteristics
EN ISO-10545-13 GHA/GHA/GHAHigh concentrations of acids and alkalis
EN ISO-10545-13 GLA/GLA/GLALow concentrations of acids and alkalis
EN ISO-10545-13 GA/GAHousehold chemicals and swimming pool salts
EN ISO-10545-14 5/-/5/5Stain resistance
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
AQUAReference:
Thickness:
6,5x20Size: cm
mm
RIAD AQUA/6,5X20Model:
26077
RIAD AQUA/6,5X20
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Non-slip characteristics
DIN-51130 -Critical angle (footwear)
004CPR2017-08-01CE Declaration of Performance:
CE MARKING
Página 2 de 2
Before laying the tiles, check the shade, calibre and quality. No claims will be accepted once the tiles have been laid. Leave a tile joint of at least 0.5 mm in the case of rectified tiles and1.5 mm for non-rectified ones. The tile colour shown in this data sheet is merely indicative and it might differ from the real tile colour. This document is purely for sales purposes and itcannot be used in any legal or administrative proceedings, in a witness statement, or as documentary proof without the express permission of PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012
GREENReference:
Thickness:
10X10Size: cm
mm
RIAD GREEN/10X10Model:
26049
RIAD GREEN/10X10
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Water absorption
EN ISO-10545-3 > 10%Water absorption
Dimensional characteristics
EN ISO-10545-2 > 95%Surface quality
EN ISO-10545-2 +0,5/-0,3% +2,0/-1,5 mmCurvature flatness
EN ISO-10545-2 ± 10% / ± 0,5 mmThickness
EN ISO-10545-2 ± 0,5 % / ± 2,0 mmLength and Width
EN ISO-10545-2 ± 0,5% / ± 2,0 mmRectangularity
EN ISO-10545-2 ± 0,3 % / ± 1,5 mmStraightness of sides
Mechanical characteristics
EN ISO 10545-11 PassCrazing resistance
EN ISO 10545-9 PassThermal shock resistance
EN ISO-10545-4 > 600 NBreaking strength
EN ISO-10545-4 > 12 N/mm2Modulus of rupture
Surface characteristics
EN ISO 10545-7 -Visible failure at No of revolutions
EN-101 3Surface scratch resistance
Chemical characteristics
EN ISO-10545-13 GHA/GHA/GHAHigh concentrations of acids and alkalis
EN ISO-10545-13 GLA/GLA/GLALow concentrations of acids and alkalis
EN ISO-10545-13 GA/GAHousehold chemicals and swimming pool salts
EN ISO-10545-14 5/-/5/5Stain resistance
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
GREENReference:
Thickness:
10X10Size: cm
mm
RIAD GREEN/10X10Model:
26049
RIAD GREEN/10X10
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Non-slip characteristics
DIN-51130 -Critical angle (footwear)
004CPR2017-08-01CE Declaration of Performance:
CE MARKING
Página 2 de 2
Before laying the tiles, check the shade, calibre and quality. No claims will be accepted once the tiles have been laid. Leave a tile joint of at least 0.5 mm in the case of rectified tiles and1.5 mm for non-rectified ones. The tile colour shown in this data sheet is merely indicative and it might differ from the real tile colour. This document is purely for sales purposes and itcannot be used in any legal or administrative proceedings, in a witness statement, or as documentary proof without the express permission of PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012
GREENReference:
Thickness:
6,5x20Size: cm
mm
RIAD GREEN/6,5X20Model:
26079
RIAD GREEN/6,5X20
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Water absorption
EN ISO-10545-3 > 10%Water absorption
Dimensional characteristics
EN ISO-10545-2 > 95%Surface quality
EN ISO-10545-2 +0,5/-0,3% +2,0/-1,5 mmCurvature flatness
EN ISO-10545-2 ± 10% / ± 0,5 mmThickness
EN ISO-10545-2 ± 0,5 % / ± 2,0 mmLength and Width
EN ISO-10545-2 ± 0,5% / ± 2,0 mmRectangularity
EN ISO-10545-2 ± 0,3 % / ± 1,5 mmStraightness of sides
Mechanical characteristics
EN ISO 10545-11 PassCrazing resistance
EN ISO 10545-9 PassThermal shock resistance
EN ISO-10545-4 > 600 NBreaking strength
EN ISO-10545-4 > 12 N/mm2Modulus of rupture
Surface characteristics
EN ISO 10545-7 -Visible failure at No of revolutions
EN-101 3Surface scratch resistance
Chemical characteristics
EN ISO-10545-13 GHA/GHA/GHAHigh concentrations of acids and alkalis
EN ISO-10545-13 GLA/GLA/GLALow concentrations of acids and alkalis
EN ISO-10545-13 GA/GAHousehold chemicals and swimming pool salts
EN ISO-10545-14 5/-/5/5Stain resistance
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
GREENReference:
Thickness:
6,5x20Size: cm
mm
RIAD GREEN/6,5X20Model:
26079
RIAD GREEN/6,5X20
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Non-slip characteristics
DIN-51130 -Critical angle (footwear)
004CPR2017-08-01CE Declaration of Performance:
CE MARKING
Página 2 de 2
Before laying the tiles, check the shade, calibre and quality. No claims will be accepted once the tiles have been laid. Leave a tile joint of at least 0.5 mm in the case of rectified tiles and1.5 mm for non-rectified ones. The tile colour shown in this data sheet is merely indicative and it might differ from the real tile colour. This document is purely for sales purposes and itcannot be used in any legal or administrative proceedings, in a witness statement, or as documentary proof without the express permission of PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012
GREYReference:
Thickness:
10X10Size: cm
mm
RIAD GREY/10X10Model:
26048
RIAD GREY/10X10
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Water absorption
EN ISO-10545-3 > 10%Water absorption
Dimensional characteristics
EN ISO-10545-2 > 95%Surface quality
EN ISO-10545-2 +0,5/-0,3% +2,0/-1,5 mmCurvature flatness
EN ISO-10545-2 ± 10% / ± 0,5 mmThickness
EN ISO-10545-2 ± 0,5 % / ± 2,0 mmLength and Width
EN ISO-10545-2 ± 0,5% / ± 2,0 mmRectangularity
EN ISO-10545-2 ± 0,3 % / ± 1,5 mmStraightness of sides
Mechanical characteristics
EN ISO 10545-11 PassCrazing resistance
EN ISO 10545-9 PassThermal shock resistance
EN ISO-10545-4 > 600 NBreaking strength
EN ISO-10545-4 > 12 N/mm2Modulus of rupture
Surface characteristics
EN ISO 10545-7 -Visible failure at No of revolutions
EN-101 3Surface scratch resistance
Chemical characteristics
EN ISO-10545-13 GHA/GHA/GHAHigh concentrations of acids and alkalis
EN ISO-10545-13 GLA/GLA/GLALow concentrations of acids and alkalis
EN ISO-10545-13 GA/GAHousehold chemicals and swimming pool salts
EN ISO-10545-14 5/-/5/5Stain resistance
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
GREYReference:
Thickness:
10X10Size: cm
mm
RIAD GREY/10X10Model:
26048
RIAD GREY/10X10
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Non-slip characteristics
DIN-51130 -Critical angle (footwear)
004CPR2017-08-01CE Declaration of Performance:
CE MARKING
Página 2 de 2
Before laying the tiles, check the shade, calibre and quality. No claims will be accepted once the tiles have been laid. Leave a tile joint of at least 0.5 mm in the case of rectified tiles and1.5 mm for non-rectified ones. The tile colour shown in this data sheet is merely indicative and it might differ from the real tile colour. This document is purely for sales purposes and itcannot be used in any legal or administrative proceedings, in a witness statement, or as documentary proof without the express permission of PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012
WHITEReference:
Thickness:
6,5x20Size: cm
mm
RIAD GREY/6,5X20Model:
26078
RIAD GREY/6,5X20
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Water absorption
EN ISO-10545-3 > 10%Water absorption
Dimensional characteristics
EN ISO-10545-2 > 95%Surface quality
EN ISO-10545-2 +0,5/-0,3% +2,0/-1,5 mmCurvature flatness
EN ISO-10545-2 ± 10% / ± 0,5 mmThickness
EN ISO-10545-2 ± 0,5 % / ± 2,0 mmLength and Width
EN ISO-10545-2 ± 0,5% / ± 2,0 mmRectangularity
EN ISO-10545-2 ± 0,3 % / ± 1,5 mmStraightness of sides
Mechanical characteristics
EN ISO 10545-11 PassCrazing resistance
EN ISO 10545-9 PassThermal shock resistance
EN ISO-10545-4 > 600 NBreaking strength
EN ISO-10545-4 > 12 N/mm2Modulus of rupture
Surface characteristics
EN ISO 10545-7 -Visible failure at No of revolutions
EN-101 3Surface scratch resistance
Chemical characteristics
EN ISO-10545-13 GHA/GHA/GHAHigh concentrations of acids and alkalis
EN ISO-10545-13 GLA/GLA/GLALow concentrations of acids and alkalis
EN ISO-10545-13 GA/GAHousehold chemicals and swimming pool salts
EN ISO-10545-14 5/-/5/5Stain resistance
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
WHITEReference:
Thickness:
6,5x20Size: cm
mm
RIAD GREY/6,5X20Model:
26078
RIAD GREY/6,5X20
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Non-slip characteristics
DIN-51130 -Critical angle (footwear)
004CPR2017-08-01CE Declaration of Performance:
CE MARKING
Página 2 de 2
Before laying the tiles, check the shade, calibre and quality. No claims will be accepted once the tiles have been laid. Leave a tile joint of at least 0.5 mm in the case of rectified tiles and1.5 mm for non-rectified ones. The tile colour shown in this data sheet is merely indicative and it might differ from the real tile colour. This document is purely for sales purposes and itcannot be used in any legal or administrative proceedings, in a witness statement, or as documentary proof without the express permission of PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012
PINKReference:
Thickness:
10X10Size: cm
mm
RIAD PINK/10X10Model:
26051
RIAD PINK/10X10
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Water absorption
EN ISO-10545-3 > 10%Water absorption
Dimensional characteristics
EN ISO-10545-2 > 95%Surface quality
EN ISO-10545-2 +0,5/-0,3% +2,0/-1,5 mmCurvature flatness
EN ISO-10545-2 ± 10% / ± 0,5 mmThickness
EN ISO-10545-2 ± 0,5 % / ± 2,0 mmLength and Width
EN ISO-10545-2 ± 0,5% / ± 2,0 mmRectangularity
EN ISO-10545-2 ± 0,3 % / ± 1,5 mmStraightness of sides
Mechanical characteristics
EN ISO 10545-11 PassCrazing resistance
EN ISO 10545-9 PassThermal shock resistance
EN ISO-10545-4 > 600 NBreaking strength
EN ISO-10545-4 > 12 N/mm2Modulus of rupture
Surface characteristics
EN ISO 10545-7 -Visible failure at No of revolutions
EN-101 3Surface scratch resistance
Chemical characteristics
EN ISO-10545-13 GHA/GHA/GHAHigh concentrations of acids and alkalis
EN ISO-10545-13 GLA/GLA/GLALow concentrations of acids and alkalis
EN ISO-10545-13 GA/GAHousehold chemicals and swimming pool salts
EN ISO-10545-14 5/-/5/5Stain resistance
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
PINKReference:
Thickness:
10X10Size: cm
mm
RIAD PINK/10X10Model:
26051
RIAD PINK/10X10
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Non-slip characteristics
DIN-51130 -Critical angle (footwear)
004CPR2017-08-01CE Declaration of Performance:
CE MARKING
Página 2 de 2
Before laying the tiles, check the shade, calibre and quality. No claims will be accepted once the tiles have been laid. Leave a tile joint of at least 0.5 mm in the case of rectified tiles and1.5 mm for non-rectified ones. The tile colour shown in this data sheet is merely indicative and it might differ from the real tile colour. This document is purely for sales purposes and itcannot be used in any legal or administrative proceedings, in a witness statement, or as documentary proof without the express permission of PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012
PINKReference:
Thickness:
6,5x20Size: cm
mm
RIAD PINK/6,5X20Model:
26081
RIAD PINK/6,5X20
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Water absorption
EN ISO-10545-3 > 10%Water absorption
Dimensional characteristics
EN ISO-10545-2 > 95%Surface quality
EN ISO-10545-2 +0,5/-0,3% +2,0/-1,5 mmCurvature flatness
EN ISO-10545-2 ± 10% / ± 0,5 mmThickness
EN ISO-10545-2 ± 0,5 % / ± 2,0 mmLength and Width
EN ISO-10545-2 ± 0,5% / ± 2,0 mmRectangularity
EN ISO-10545-2 ± 0,3 % / ± 1,5 mmStraightness of sides
Mechanical characteristics
EN ISO 10545-11 PassCrazing resistance
EN ISO 10545-9 PassThermal shock resistance
EN ISO-10545-4 > 600 NBreaking strength
EN ISO-10545-4 > 12 N/mm2Modulus of rupture
Surface characteristics
EN ISO 10545-7 -Visible failure at No of revolutions
EN-101 3Surface scratch resistance
Chemical characteristics
EN ISO-10545-13 GHA/GHA/GHAHigh concentrations of acids and alkalis
EN ISO-10545-13 GLA/GLA/GLALow concentrations of acids and alkalis
EN ISO-10545-13 GA/GAHousehold chemicals and swimming pool salts
EN ISO-10545-14 5/-/5/5Stain resistance
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
PINKReference:
Thickness:
6,5x20Size: cm
mm
RIAD PINK/6,5X20Model:
26081
RIAD PINK/6,5X20
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Non-slip characteristics
DIN-51130 -Critical angle (footwear)
004CPR2017-08-01CE Declaration of Performance:
CE MARKING
Página 2 de 2
Before laying the tiles, check the shade, calibre and quality. No claims will be accepted once the tiles have been laid. Leave a tile joint of at least 0.5 mm in the case of rectified tiles and1.5 mm for non-rectified ones. The tile colour shown in this data sheet is merely indicative and it might differ from the real tile colour. This document is purely for sales purposes and itcannot be used in any legal or administrative proceedings, in a witness statement, or as documentary proof without the express permission of PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012
SKYReference:
Thickness:
10X10Size: cm
mm
RIAD SKY/10X10Model:
26050
RIAD SKY/10X10
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Water absorption
EN ISO-10545-3 > 10%Water absorption
Dimensional characteristics
EN ISO-10545-2 > 95%Surface quality
EN ISO-10545-2 +0,5/-0,3% +2,0/-1,5 mmCurvature flatness
EN ISO-10545-2 ± 10% / ± 0,5 mmThickness
EN ISO-10545-2 ± 0,5 % / ± 2,0 mmLength and Width
EN ISO-10545-2 ± 0,5% / ± 2,0 mmRectangularity
EN ISO-10545-2 ± 0,3 % / ± 1,5 mmStraightness of sides
Mechanical characteristics
EN ISO 10545-11 PassCrazing resistance
EN ISO 10545-9 PassThermal shock resistance
EN ISO-10545-4 > 600 NBreaking strength
EN ISO-10545-4 > 12 N/mm2Modulus of rupture
Surface characteristics
EN ISO 10545-7 -Visible failure at No of revolutions
EN-101 3Surface scratch resistance
Chemical characteristics
EN ISO-10545-13 GHA/GHA/GHAHigh concentrations of acids and alkalis
EN ISO-10545-13 GLA/GLA/GLALow concentrations of acids and alkalis
EN ISO-10545-13 GA/GAHousehold chemicals and swimming pool salts
EN ISO-10545-14 5/-/5/5Stain resistance
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
SKYReference:
Thickness:
10X10Size: cm
mm
RIAD SKY/10X10Model:
26050
RIAD SKY/10X10
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Non-slip characteristics
DIN-51130 -Critical angle (footwear)
004CPR2017-08-01CE Declaration of Performance:
CE MARKING
Página 2 de 2
Before laying the tiles, check the shade, calibre and quality. No claims will be accepted once the tiles have been laid. Leave a tile joint of at least 0.5 mm in the case of rectified tiles and1.5 mm for non-rectified ones. The tile colour shown in this data sheet is merely indicative and it might differ from the real tile colour. This document is purely for sales purposes and itcannot be used in any legal or administrative proceedings, in a witness statement, or as documentary proof without the express permission of PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012
SKYReference:
Thickness:
6,5x20Size: cm
mm
RIAD SKY/6,5X20Model:
26080
RIAD SKY/6,5X20
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Water absorption
EN ISO-10545-3 > 10%Water absorption
Dimensional characteristics
EN ISO-10545-2 > 95%Surface quality
EN ISO-10545-2 +0,5/-0,3% +2,0/-1,5 mmCurvature flatness
EN ISO-10545-2 ± 10% / ± 0,5 mmThickness
EN ISO-10545-2 ± 0,5 % / ± 2,0 mmLength and Width
EN ISO-10545-2 ± 0,5% / ± 2,0 mmRectangularity
EN ISO-10545-2 ± 0,3 % / ± 1,5 mmStraightness of sides
Mechanical characteristics
EN ISO 10545-11 PassCrazing resistance
EN ISO 10545-9 PassThermal shock resistance
EN ISO-10545-4 > 600 NBreaking strength
EN ISO-10545-4 > 12 N/mm2Modulus of rupture
Surface characteristics
EN ISO 10545-7 -Visible failure at No of revolutions
EN-101 3Surface scratch resistance
Chemical characteristics
EN ISO-10545-13 GHA/GHA/GHAHigh concentrations of acids and alkalis
EN ISO-10545-13 GLA/GLA/GLALow concentrations of acids and alkalis
EN ISO-10545-13 GA/GAHousehold chemicals and swimming pool salts
EN ISO-10545-14 5/-/5/5Stain resistance
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
SKYReference:
Thickness:
6,5x20Size: cm
mm
RIAD SKY/6,5X20Model:
26080
RIAD SKY/6,5X20
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Non-slip characteristics
DIN-51130 -Critical angle (footwear)
004CPR2017-08-01CE Declaration of Performance:
CE MARKING
Página 2 de 2
Before laying the tiles, check the shade, calibre and quality. No claims will be accepted once the tiles have been laid. Leave a tile joint of at least 0.5 mm in the case of rectified tiles and1.5 mm for non-rectified ones. The tile colour shown in this data sheet is merely indicative and it might differ from the real tile colour. This document is purely for sales purposes and itcannot be used in any legal or administrative proceedings, in a witness statement, or as documentary proof without the express permission of PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012
WHITEReference:
Thickness:
10X10Size: cm
mm
RIAD WHITE/10X10Model:
26045
RIAD WHITE/10X10
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Water absorption
EN ISO-10545-3 > 10%Water absorption
Dimensional characteristics
EN ISO-10545-2 > 95%Surface quality
EN ISO-10545-2 +0,5/-0,3% +2,0/-1,5 mmCurvature flatness
EN ISO-10545-2 ± 10% / ± 0,5 mmThickness
EN ISO-10545-2 ± 0,5 % / ± 2,0 mmLength and Width
EN ISO-10545-2 ± 0,5% / ± 2,0 mmRectangularity
EN ISO-10545-2 ± 0,3 % / ± 1,5 mmStraightness of sides
Mechanical characteristics
EN ISO 10545-11 PassCrazing resistance
EN ISO 10545-9 PassThermal shock resistance
EN ISO-10545-4 > 600 NBreaking strength
EN ISO-10545-4 > 12 N/mm2Modulus of rupture
Surface characteristics
EN ISO 10545-7 -Visible failure at No of revolutions
EN-101 3Surface scratch resistance
Chemical characteristics
EN ISO-10545-13 GHA/GHA/GHAHigh concentrations of acids and alkalis
EN ISO-10545-13 GLA/GLA/GLALow concentrations of acids and alkalis
EN ISO-10545-13 GA/GAHousehold chemicals and swimming pool salts
EN ISO-10545-14 5/-/5/5Stain resistance
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
WHITEReference:
Thickness:
10X10Size: cm
mm
RIAD WHITE/10X10Model:
26045
RIAD WHITE/10X10
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Non-slip characteristics
DIN-51130 -Critical angle (footwear)
004CPR2017-08-01CE Declaration of Performance:
CE MARKING
Página 2 de 2
Before laying the tiles, check the shade, calibre and quality. No claims will be accepted once the tiles have been laid. Leave a tile joint of at least 0.5 mm in the case of rectified tiles and1.5 mm for non-rectified ones. The tile colour shown in this data sheet is merely indicative and it might differ from the real tile colour. This document is purely for sales purposes and itcannot be used in any legal or administrative proceedings, in a witness statement, or as documentary proof without the express permission of PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012
WHITEReference:
Thickness:
6,5x20Size: cm
mm
RIAD WHITE/6,5X20Model:
26076
RIAD WHITE/6,5X20
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Water absorption
EN ISO-10545-3 > 10%Water absorption
Dimensional characteristics
EN ISO-10545-2 > 95%Surface quality
EN ISO-10545-2 +0,5/-0,3% +2,0/-1,5 mmCurvature flatness
EN ISO-10545-2 ± 10% / ± 0,5 mmThickness
EN ISO-10545-2 ± 0,5 % / ± 2,0 mmLength and Width
EN ISO-10545-2 ± 0,5% / ± 2,0 mmRectangularity
EN ISO-10545-2 ± 0,3 % / ± 1,5 mmStraightness of sides
Mechanical characteristics
EN ISO 10545-11 PassCrazing resistance
EN ISO 10545-9 PassThermal shock resistance
EN ISO-10545-4 > 600 NBreaking strength
EN ISO-10545-4 > 12 N/mm2Modulus of rupture
Surface characteristics
EN ISO 10545-7 -Visible failure at No of revolutions
EN-101 3Surface scratch resistance
Chemical characteristics
EN ISO-10545-13 GHA/GHA/GHAHigh concentrations of acids and alkalis
EN ISO-10545-13 GLA/GLA/GLALow concentrations of acids and alkalis
EN ISO-10545-13 GA/GAHousehold chemicals and swimming pool salts
EN ISO-10545-14 5/-/5/5Stain resistance
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
WHITEReference:
Thickness:
6,5x20Size: cm
mm
RIAD WHITE/6,5X20Model:
26076
RIAD WHITE/6,5X20
Body Type:
Finish:
9,00
WALL TILE - GROUP BIII
Non-slip characteristics
DIN-51130 -Critical angle (footwear)
004CPR2017-08-01CE Declaration of Performance:
CE MARKING
Página 2 de 2
Before laying the tiles, check the shade, calibre and quality. No claims will be accepted once the tiles have been laid. Leave a tile joint of at least 0.5 mm in the case of rectified tiles and1.5 mm for non-rectified ones. The tile colour shown in this data sheet is merely indicative and it might differ from the real tile colour. This document is purely for sales purposes and itcannot be used in any legal or administrative proceedings, in a witness statement, or as documentary proof without the express permission of PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012
RIAD SAND/10X10
SAND
Espesor:
Tamaño:
mm
RIAD SAND/10X10Modelo:
9,00
10X10 cm
Acabado: Natural
REVESTIMIENTO - GRUPO BIII Material:
GL - Baldosa Cerámica ESMALTADA
27345Referencia:
Absorción de Agua
EN ISO-10545-3 > 10%Absorción de Agua
Características Dimensionales
EN ISO-10545-2 > 95%Aspecto Superficial
EN ISO-10545-2 ± 0,75 mmCurvatura
EN ISO-10545-2 ± 0,5 mmEspesor
EN ISO-10545-2 ± 0,75 mmLongitud y anchura
EN ISO-10545-2 ± 0,75 mmOrtogonalidad
EN ISO-10545-2 ± 0,5 mmRectitud de los Lados
Características Mecánicas
EN ISO 10545-11 CumpleResistencia al cuarteo
EN ISO 10545-9 CumpleResistencia al choque térmico
EN ISO-10545-4 > 600 NFuerza Rotura
EN ISO-10545-4 > 12 N/mm2Resistencia a la Flexion
Características Superficiales
EN ISO 10545-7 -Revoluciones efecto visible
EN-101 3Resistencia al rayado
Características Químicas
EN ISO-10545-13 HA/HA/HAAcidos y Bases de alta concentración
EN ISO-10545-13 LA/LA/LAAcidos y Bases de baja concentración
EN ISO-10545-13 A/AProductos de Limpieza Domestica
EN ISO-10545-14 5/-/5/5Resistencia a las Manchas
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
RIAD SAND/10X10
SAND
Espesor:
Tamaño:
mm
RIAD SAND/10X10Modelo:
9,00
10X10 cm
Acabado: Natural
REVESTIMIENTO - GRUPO BIII Material:
GL - Baldosa Cerámica ESMALTADA
27345Referencia:
Características Antideslizamiento
DIN-51130 -Angulo crítico deslizamiento rampa inclinada pie calzado
004CPR2017-08-01Declaración CE de Prestaciones:
MARCADO CE
Página 2 de 2
Antes de la colocación comprobar tono, calibre y calidad. No se aceptaran reclamaciones después de la colocación. Respetar una junta minima de 0,5 en materiales rectificados y 1,5 enno rectificados. El color de la pieza de la presente ficha es oríentativo y puede diferir del color de la pieza real. Este doumento es puramente comercial y no podrá ser utilizado encualquier procedimiento judicial o administrativo, ni como dictamen pericial ni como prueba documental, salvo autorización expresa de PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012
RIAD RED/10X10
AQUA
Espesor:
Tamaño:
mm
RIAD RED/10X10Modelo:
9,00
10X10 cm
Acabado: Natural
REVESTIMIENTO - GRUPO BIII Material:
GL - Baldosa Cerámica ESMALTADA
27346Referencia:
Absorción de Agua
EN ISO-10545-3 > 10%Absorción de Agua
Características Dimensionales
EN ISO-10545-2 > 95%Aspecto Superficial
EN ISO-10545-2 ± 0,75 mmCurvatura
EN ISO-10545-2 ± 0,5 mmEspesor
EN ISO-10545-2 ± 0,75 mmLongitud y anchura
EN ISO-10545-2 ± 0,75 mmOrtogonalidad
EN ISO-10545-2 ± 0,5 mmRectitud de los Lados
Características Mecánicas
EN ISO 10545-11 CumpleResistencia al cuarteo
EN ISO 10545-9 CumpleResistencia al choque térmico
EN ISO-10545-4 > 600 NFuerza Rotura
EN ISO-10545-4 > 12 N/mm2Resistencia a la Flexion
Características Superficiales
EN ISO 10545-7 -Revoluciones efecto visible
EN-101 3Resistencia al rayado
Características Químicas
EN ISO-10545-13 HA/HA/HAAcidos y Bases de alta concentración
EN ISO-10545-13 LA/LA/LAAcidos y Bases de baja concentración
EN ISO-10545-13 A/AProductos de Limpieza Domestica
EN ISO-10545-14 5/-/5/5Resistencia a las Manchas
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
RIAD RED/10X10
AQUA
Espesor:
Tamaño:
mm
RIAD RED/10X10Modelo:
9,00
10X10 cm
Acabado: Natural
REVESTIMIENTO - GRUPO BIII Material:
GL - Baldosa Cerámica ESMALTADA
27346Referencia:
Características Antideslizamiento
DIN-51130 -Angulo crítico deslizamiento rampa inclinada pie calzado
004CPR2017-08-01Declaración CE de Prestaciones:
MARCADO CE
Página 2 de 2
Antes de la colocación comprobar tono, calibre y calidad. No se aceptaran reclamaciones después de la colocación. Respetar una junta minima de 0,5 en materiales rectificados y 1,5 enno rectificados. El color de la pieza de la presente ficha es oríentativo y puede diferir del color de la pieza real. Este doumento es puramente comercial y no podrá ser utilizado encualquier procedimiento judicial o administrativo, ni como dictamen pericial ni como prueba documental, salvo autorización expresa de PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012
RIAD TAUPE/10X10
TAUPE
Espesor:
Tamaño:
mm
RIAD TAUPE/10X10Modelo:
9,00
10X10 cm
Acabado: Natural
REVESTIMIENTO - GRUPO BIII Material:
GL - Baldosa Cerámica ESMALTADA
27347Referencia:
Absorción de Agua
EN ISO-10545-3 > 10%Absorción de Agua
Características Dimensionales
EN ISO-10545-2 > 95%Aspecto Superficial
EN ISO-10545-2 ± 0,75 mmCurvatura
EN ISO-10545-2 ± 0,5 mmEspesor
EN ISO-10545-2 ± 0,75 mmLongitud y anchura
EN ISO-10545-2 ± 0,75 mmOrtogonalidad
EN ISO-10545-2 ± 0,5 mmRectitud de los Lados
Características Mecánicas
EN ISO 10545-11 CumpleResistencia al cuarteo
EN ISO 10545-9 CumpleResistencia al choque térmico
EN ISO-10545-4 > 600 NFuerza Rotura
EN ISO-10545-4 > 12 N/mm2Resistencia a la Flexion
Características Superficiales
EN ISO 10545-7 -Revoluciones efecto visible
EN-101 3Resistencia al rayado
Características Químicas
EN ISO-10545-13 HA/HA/HAAcidos y Bases de alta concentración
EN ISO-10545-13 LA/LA/LAAcidos y Bases de baja concentración
EN ISO-10545-13 A/AProductos de Limpieza Domestica
EN ISO-10545-14 5/-/5/5Resistencia a las Manchas
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
RIAD TAUPE/10X10
TAUPE
Espesor:
Tamaño:
mm
RIAD TAUPE/10X10Modelo:
9,00
10X10 cm
Acabado: Natural
REVESTIMIENTO - GRUPO BIII Material:
GL - Baldosa Cerámica ESMALTADA
27347Referencia:
Características Antideslizamiento
DIN-51130 -Angulo crítico deslizamiento rampa inclinada pie calzado
004CPR2017-08-01Declaración CE de Prestaciones:
MARCADO CE
Página 2 de 2
Antes de la colocación comprobar tono, calibre y calidad. No se aceptaran reclamaciones después de la colocación. Respetar una junta minima de 0,5 en materiales rectificados y 1,5 enno rectificados. El color de la pieza de la presente ficha es oríentativo y puede diferir del color de la pieza real. Este doumento es puramente comercial y no podrá ser utilizado encualquier procedimiento judicial o administrativo, ni como dictamen pericial ni como prueba documental, salvo autorización expresa de PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012
RIAD SAND/6,5X20
AQUA
Espesor:
Tamaño:
mm
RIAD SAND/6,5X20Modelo:
9,00
6,5x20 cm
Acabado: Natural
REVESTIMIENTO - GRUPO BIII Material:
GL - Baldosa Cerámica ESMALTADA
27348Referencia:
Absorción de Agua
EN ISO-10545-3 > 10%Absorción de Agua
Características Dimensionales
EN ISO-10545-2 > 95%Aspecto Superficial
EN ISO-10545-2 ± 0,75 mmCurvatura
EN ISO-10545-2 ± 0,5 mmEspesor
EN ISO-10545-2 ± 0,75 mmLongitud y anchura
EN ISO-10545-2 ± 0,75 mmOrtogonalidad
EN ISO-10545-2 ± 0,5 mmRectitud de los Lados
Características Mecánicas
EN ISO 10545-11 CumpleResistencia al cuarteo
EN ISO 10545-9 CumpleResistencia al choque térmico
EN ISO-10545-4 > 600 NFuerza Rotura
EN ISO-10545-4 > 12 N/mm2Resistencia a la Flexion
Características Superficiales
EN ISO 10545-7 -Revoluciones efecto visible
EN-101 3Resistencia al rayado
Características Químicas
EN ISO-10545-13 HA/HA/HAAcidos y Bases de alta concentración
EN ISO-10545-13 LA/LA/LAAcidos y Bases de baja concentración
EN ISO-10545-13 A/AProductos de Limpieza Domestica
EN ISO-10545-14 5/-/5/5Resistencia a las Manchas
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
RIAD SAND/6,5X20
AQUA
Espesor:
Tamaño:
mm
RIAD SAND/6,5X20Modelo:
9,00
6,5x20 cm
Acabado: Natural
REVESTIMIENTO - GRUPO BIII Material:
GL - Baldosa Cerámica ESMALTADA
27348Referencia:
Características Antideslizamiento
DIN-51130 -Angulo crítico deslizamiento rampa inclinada pie calzado
004CPR2017-08-01Declaración CE de Prestaciones:
MARCADO CE
Página 2 de 2
Antes de la colocación comprobar tono, calibre y calidad. No se aceptaran reclamaciones después de la colocación. Respetar una junta minima de 0,5 en materiales rectificados y 1,5 enno rectificados. El color de la pieza de la presente ficha es oríentativo y puede diferir del color de la pieza real. Este doumento es puramente comercial y no podrá ser utilizado encualquier procedimiento judicial o administrativo, ni como dictamen pericial ni como prueba documental, salvo autorización expresa de PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012
RIAD RED/6,5X20
RED
Espesor:
Tamaño:
mm
RIAD RED/6,5X20Modelo:
9,00
6,5x20 cm
Acabado: Natural
REVESTIMIENTO - GRUPO BIII Material:
GL - Baldosa Cerámica ESMALTADA
27349Referencia:
Absorción de Agua
EN ISO-10545-3 > 10%Absorción de Agua
Características Dimensionales
EN ISO-10545-2 > 95%Aspecto Superficial
EN ISO-10545-2 ± 0,75 mmCurvatura
EN ISO-10545-2 ± 0,5 mmEspesor
EN ISO-10545-2 ± 0,75 mmLongitud y anchura
EN ISO-10545-2 ± 0,75 mmOrtogonalidad
EN ISO-10545-2 ± 0,5 mmRectitud de los Lados
Características Mecánicas
EN ISO 10545-11 CumpleResistencia al cuarteo
EN ISO 10545-9 CumpleResistencia al choque térmico
EN ISO-10545-4 > 600 NFuerza Rotura
EN ISO-10545-4 > 12 N/mm2Resistencia a la Flexion
Características Superficiales
EN ISO 10545-7 -Revoluciones efecto visible
EN-101 3Resistencia al rayado
Características Químicas
EN ISO-10545-13 HA/HA/HAAcidos y Bases de alta concentración
EN ISO-10545-13 LA/LA/LAAcidos y Bases de baja concentración
EN ISO-10545-13 A/AProductos de Limpieza Domestica
EN ISO-10545-14 5/-/5/5Resistencia a las Manchas
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
RIAD RED/6,5X20
RED
Espesor:
Tamaño:
mm
RIAD RED/6,5X20Modelo:
9,00
6,5x20 cm
Acabado: Natural
REVESTIMIENTO - GRUPO BIII Material:
GL - Baldosa Cerámica ESMALTADA
27349Referencia:
Características Antideslizamiento
DIN-51130 -Angulo crítico deslizamiento rampa inclinada pie calzado
004CPR2017-08-01Declaración CE de Prestaciones:
MARCADO CE
Página 2 de 2
Antes de la colocación comprobar tono, calibre y calidad. No se aceptaran reclamaciones después de la colocación. Respetar una junta minima de 0,5 en materiales rectificados y 1,5 enno rectificados. El color de la pieza de la presente ficha es oríentativo y puede diferir del color de la pieza real. Este doumento es puramente comercial y no podrá ser utilizado encualquier procedimiento judicial o administrativo, ni como dictamen pericial ni como prueba documental, salvo autorización expresa de PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012
RIAD TAUPE/6,5X20
TAUPE
Espesor:
Tamaño:
mm
RIAD TAUPE/6,5X20Modelo:
9,00
6,5x20 cm
Acabado: Natural
REVESTIMIENTO - GRUPO BIII Material:
GL - Baldosa Cerámica ESMALTADA
27350Referencia:
Absorción de Agua
EN ISO-10545-3 > 10%Absorción de Agua
Características Dimensionales
EN ISO-10545-2 > 95%Aspecto Superficial
EN ISO-10545-2 ± 0,75 mmCurvatura
EN ISO-10545-2 ± 0,5 mmEspesor
EN ISO-10545-2 ± 0,75 mmLongitud y anchura
EN ISO-10545-2 ± 0,75 mmOrtogonalidad
EN ISO-10545-2 ± 0,5 mmRectitud de los Lados
Características Mecánicas
EN ISO 10545-11 CumpleResistencia al cuarteo
EN ISO 10545-9 CumpleResistencia al choque térmico
EN ISO-10545-4 > 600 NFuerza Rotura
EN ISO-10545-4 > 12 N/mm2Resistencia a la Flexion
Características Superficiales
EN ISO 10545-7 -Revoluciones efecto visible
EN-101 3Resistencia al rayado
Características Químicas
EN ISO-10545-13 HA/HA/HAAcidos y Bases de alta concentración
EN ISO-10545-13 LA/LA/LAAcidos y Bases de baja concentración
EN ISO-10545-13 A/AProductos de Limpieza Domestica
EN ISO-10545-14 5/-/5/5Resistencia a las Manchas
Página 1 de 2
harmonyinspire.com | [email protected] | +34 964 602 012
RIAD TAUPE/6,5X20
TAUPE
Espesor:
Tamaño:
mm
RIAD TAUPE/6,5X20Modelo:
9,00
6,5x20 cm
Acabado: Natural
REVESTIMIENTO - GRUPO BIII Material:
GL - Baldosa Cerámica ESMALTADA
27350Referencia:
Características Antideslizamiento
DIN-51130 -Angulo crítico deslizamiento rampa inclinada pie calzado
004CPR2017-08-01Declaración CE de Prestaciones:
MARCADO CE
Página 2 de 2
Antes de la colocación comprobar tono, calibre y calidad. No se aceptaran reclamaciones después de la colocación. Respetar una junta minima de 0,5 en materiales rectificados y 1,5 enno rectificados. El color de la pieza de la presente ficha es oríentativo y puede diferir del color de la pieza real. Este doumento es puramente comercial y no podrá ser utilizado encualquier procedimiento judicial o administrativo, ni como dictamen pericial ni como prueba documental, salvo autorización expresa de PERONDA GROUP.
harmonyinspire.com | [email protected] | +34 964 602 012