日本シーエムアイ株式会社 Nippon C.M.I. Co., Ltd. | 2017.10.24
SIMONA® E-CTFE Halar®
ヘイラー901, 902 レジン使用 Based on Halar® 901, 902 Resins
SIMONA® E-CTFE はエチレン+CTFE の共重合体です。薬品の透過性が
低く機械的強度、耐衝撃性と優れた耐熱性があり、溶接や組付けが容易で
す。SIMONA® E-CTFE は半導体製造プロセスで使用されるあらゆる薬品に
耐性があり、pH0-14 の範囲で使用できます。超純粋性を持つ製品として、
ウェットパーツに適しています。様々な用途で全フッ素樹脂に比べてコス
トパフォーマンスに優れています。
Produced from either Halar® 901 or 902 resins to accommodate users'
specifications, SIMONA sheet made from this co-polymer of ethylene
and CTFE is strong, stiff and impact resistant, and features excellent
thermal properties and chemical permeation resistance. It can be
welded and formed readily. Suitable for use in the pH 0-14 range, SIMONA® E-CTFE resists the full array of Semicon process
chemicals. It ranks as ultrapure and suitable for wetted parts. It provides an attractive cost and performance option over fully
fluorinated materials for many applications.
特長
・高純粋性
・熱安定性
・半導体製造プロセスで使用されるあらゆる薬品への耐性
・FM4910 適合品(ヘイラー901 のみ)
・熱成形、溶接が容易
・優れた耐衝撃性
Advantages
・High purity
・Thermal stability
・Resists full range of semicon process chemicals
・FM4910 listed(Halar® 901 only)
・Thermoforms, welds easily
・Impact resistant
用途
・半導体製造プロセスにおけるタンク、構造材
・難燃性が要求される部材
・薬液などの搬送システム
・薬液槽
Proven applications
・Semiconductor process tanks, liners and components
・Fire safe componentry
・Fluid handling systems
・Chemical storage
製品サイズ
・押出シート
T2.3~50.8 - W1,220×L2,440 (mm)
※ヘイラー901 は T37mm まで
Standard sizes
・Extruded sheet
T2.3~50.8 – W1,220×L2,440 (mm)
※Halar® 901 is up to T37mm
色調
・ナチュラル(半透明ホワイト)
Standard colors
・Natural translucent white
溶接棒
・φ3.2mm、φ4.0mm
Weld materials
・1/8" (φ3.2mm), 5/32" (φ4.0mm) round rod
日本シーエムアイ株式会社 Nippon C.M.I. Co., Ltd. | 2017.10.24
主な材料特性 Material Specifications
特性 Property ASTM SPEC Halar®901 Halar®902
環境特性
Environment
比重 Density D792 1.68 1.71
吸水率 Water Absorption D570 <0.1%
耐摩耗性 Abrasion Resistance Taber CS17 5 mg/1000
酸素指数 Oxygen Index D2863 52%
燃焼性 Flammability UL94 V-0 相当 (meet V-0)
FM4910 YES -
摩擦係数
Coefficient of Friction
C1894(静摩擦係数)
C1894(動摩擦係数)
0.1 – 0.2
0.1 – 0.2
機械的特性
Mechanical
引張強さ(降伏点)
Tensile Strength (yield)
D1708, D638 31Mpa
4,500psi
破断時伸び(破断点)
Elongation (break)
D1708, D638 275%
曲げ弾性率 Flexural Modulus D790 @23℃ 1,690Mpa
245,000psi
アイゾット衝撃強さ
Notched Izod Impact
D256 @23℃ 破壊せず
No Break
硬度 Shore D Hardness D2240 73
熱的特性
Thermal
連続使用温度
Continuous Service Temp
Maximum 150℃
302℉
融点 Melting Point D3418 242℃
468℉
ビカット軟化温度
Vicat Softening Point
D1525 -
熱膨張係数
Coefficient of Expansion
E831 TMA 9 X 10-5cm/cm-℃
(5 X 10-5in/in-℉)
荷重たわみ温度 Deflection Temp
D648
0.45Mpa (66psi)
1.81Mpa(264psi)
90℃ / 195℉
70℃ / 160℉
※連続使用温度は薬液のない、乾燥状態での条件です。 ※Continuous Service Temperature based upon "non-chemical Dry
Usage."
※表中のデータは ASTM に基づいた平均的かつ代表的な原料メーカー
のデータを反映しています。
※Table data reflects ASTM based average typical vendor data.
※データは一般的なガイドラインです。 ※Data meant as general guidelines only.
※特定の用途に対してはユーザー様にて追加試験いただく必要があり
ます。
※Specific applications require additional testing by the buyer.
※表中データは標準的な無垢材の製品テストに基づいたものです。 ※All properties based on standard unbacked product tests only.