OPERATION MANUAL SM-40L
(Planetary Mixer)
SINMAGSinmag Planetary Mixer
call: +91 9899332022 011 65666618
Now Available in INDIA
Authorised Distributor
CONTENTS
1
Introduction•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• ••••••••••••••(2)
Installation & Commissioning•••••••••••••••••••••••••••••••••••••••••••••••••••(3)
Operation•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••(4)
Caution•••••••••••••••••••••••••••••••••• ••••••••••••••••••••••••••••••••••••••••••••••(7)
Cleaning & Maintenance••••••••••••••••••••••••••••••••••••••••••••••••••••••••••(8)
Trouble Shooting•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••(9)
Parts List•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••(11)
Wiring Diagram••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••(15)
Machine Warranty•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••(16)
SINMAGSinmag Planetary Mixer
call: +91 9899332022 011 65666618
Now Available in INDIA
Authorised Distributor
INTRODUCTION
2
Brief Introduction
SM-40L is Planetary Mixer with 10 Agitator Speed. It is produced to mix
liquid ingredients, viscid ingredients and dough. With the Inverter, it is
convenient for operator to shift the speed without stopping the machine.
And the safety grid is fitted to protect the operator from unnecessary injury.
Owners and operators should carefully read and familiarize themselves
with this entire manual before attempting to operate or service this machine.
Complying with this manual will ensure years of safe and trouble-free
operation.
All of the information, illustration and specification contained in this manual
are based on the latest product information available at the time of printing.
SINMAG reserves the right to make changes at any time without notice. If
questions arise during the operation or servicing, please contact us before
proceeding.
Specification
INSTALLATION AND COMMISSIONING
3
Installation
On arrival, examine the machine as well as its packing. If the machine is
found to be damaged in any way, notify the forwarding company
immediately. The damage can then be assessed to determine liability.
Non-obvious damage can be claimed within seven days, including the day
of arrival. We do not grant the right of replacement for any damage claimed
after this period.
The machine is supplied ready for installation, select a location for your
machine with sufficient room for operation, cleaning and servicing.
Electric Connection
Connect the electric cables to the machine with a circuit breaker which is
about 1.5m high over ground.
Connect the right power supply according to the indication on the machine
nameplate. And the electric current value of your power supply must be
steady, otherwise it will do damage to the inverter.
The machine should be on level ground whilst in use, and the grounding
protection is necessary.
Commissioning
After connecting the power supply, press the handle to lift the bowl to the
top position. Then start the mixer to check whether or not the directon of the
machine head rotation is right. When look from above, the mixing head
should rotate clockwise, shown as the arrow on the mixing head. If not,
please swap any two of the three phases.
OPERATION
4
Agitator
When assembling an agitator, the bowl must be in the down position. Slip
the agitator up on the shaft and turn it until the drive pin is fixed in the bush.
Three agitators are available, each suited to a particular job.
hook beater whipping ball
The hook is used for small quantity of dough; The beater is commonly used
for thin butters and mashing potatoes; The whipping ball is best for mixing
the cream and eggs.
To make the machine could be used for a long period with the best effect,
please read the below list carefully before proceeding to operate the
machine. This list shows the usage of different tools for mixing different
ingredients. Also this list shows the suitable speed for mixing different
ingredients.
OPERATION
5
Control Panel
See above picture.
1). The left below the “Control” is speed display, green is start
button, red is stop button, a nd is speed shift button. During
operation, press or to in crease or decrease the number on
the , the number ranges from 01 to 10 (but not circulatory), 01 is for
the slowest speed, 10 is for the fastest speed. You can change speed
during the machine is running (don’t need to stop the machine).
2). The right below the “Timer” is running time display, the number
units is minute. The alarm clock and or are time control
button, press , the number on will increase from 10 to 70 (the
number is a multiple of 10). When the number on is 70, if we
press , “--” will display. When we press again, will display 10,
that is the display on is a single circulation. Press or , the
number on will increase or de crease from 01 to 99 (the number is a
multiple of 1), When the number on is 01, if we press , will
display “--” (don’t circulate).
3). “On” is indication lamp for machine running condition. Ordinary light
shows the machine is in running condition with no timing; Red light flicker
shows the machine is in running condition with timing; Light off shows the
machine is in stop condition.
OPERATION
6
4). If the safety grid is open or bowl
bracket is not at the top position,
below the control and
below the timer will display open
(see the right picture).
5). Red button is Emergency Switch. Press this button when there is
something emergent, and the machine will stop immediately. If we want to
resume its work, we only need to turn the button in the direction of the arrow,
then the button will popup and the machine runs.
Operation Steps
1. Operate the handle to lower the bowl bracket to the bottom position.
2. Put the agitator in the bowl and fix the bowl on the bracket.
3. Install the right agitator.
4. Put the material into the bowl.
5. Operate the handle to lift the bowl to the top position.
6. Release the emergency stop button, set the right speed and kneading
time according to the actual condition, then press the button to start
the mixing.
7. During operation process, you can add the mixing ingredient into the
bowl by opening the safety grid.
8. Open the safety grid when the mixing reachs the estimate effect.
9. Lower the bowl to the bottom position.
10. Turn the fixed handle to loosen the bowl
11. Take down the bowl and the agitator, be careful that don’t leave the
agitator in the bowl, finally pour the mixture.
CAUTION
7
1. Operate the machine according to the Capicity List. Don’ t overload the
mixer.
2. All the safety cover and side board must be closed during operation
unless maintenance
3. Pay attention to the power cord, protect it from pressing and pulling.
4. The machine should stop automatically when you open the safety cover
or lower the bowl bracket. If not, please ask an authorized technician to
check the limit switch in the machine.
5. All the operators should comply with safety rules on clothing and
wearing.
6. Don’t lean on the machine when the machine is in running condition.
7. Isolate the machine form the power supply before doing the
maintenance.
8. The machine must be in ground protection.
9. After daily use, please isolate the machine from power supply.
10. Press every button on the control panel only with finger, don’t use any
other tools.
CLEANING AND MAINTENANCE
8
Cleaning 1). Isolate the machine from power supply before cleaning.
2). Use the wet cloth to clean the machine after daily use, do not wash it
with a running water.
3). Clean the bowl and agitator after daily use. And wipe up them with cloth
to keep the bowl without seeper.
4). Keep the bowl, agitator and other parts contacting with ingredient clean
before daily use.
5). Every 2 or 3 months, open the top cover board and back cover board
and clean the inside.
Maintenance Every month:
1. Check the components to see whether they are in good condition and
the conveyor belts are in good tension.
2. Check the Condition of the power cable, replace them as is necessary.
3. As the shaking of the machine running, rescrew all the bolts every
month.
4. Open the back cover board, grease the gear wheel, worm and other
mesh parts.
5. Grease the drive gear wheel, steps:
a). Remove the safety cover, and you will see an oiling hole on the
planetary head.
b). Grease the machine through filling oil hole.
c). Turn on the machine to check the machine running and noise, when it
is normal, clear the oil around the oiling hole with cloth.
d). Install the safety cover.
TROUBLE SHOOTING
9
Trouble Shooting
Item Possible reason Method
1. The agitator rotates
in reverse direction.
Check whether the any of the two
phases are in reverse connection.
Exchange any of the two
cables.
2. Machine shakes when operation.
a). The ground is not horizontal and
plain enough.
b). Foot pad is unstable.
a). Select a horizontal and
plain ground to install it.
b). Readjust the foot pad
to enable the machine’s
stability.
3. The bowl still
rotates after the
safety cover has
been opened.
a). There is something wrong with limit
switch.
b). The adjusting wheel doesn’t go with
limit switch
a). Change the limit switch.
b). Tighten the adjusting
wheel or change it if
damaged.
4. Main shaft can notwork.
a). Check the power. b). Check the main switch. c). Check if the trolley is located well. d). Check if any damage on operation
panel. e). Check if any loop damage or bad
contact on contactor. f). Check if any overload relay drops.
Should call for professional
electricians.
5. Main shaft can not stop.
a). Check if any damage on operation
panel.
b). Check the contactor.
Should call for professional
electricians.
6. Main shaft can not work continuously.
a). Check if any damage or bad contact
on electromagnetic contactor.
b). Check if any abnormal on motor.
c). Check if any damage on operation
panel.
Should call for professional
electricians.
7. Strange noise made by motor.
a). Check if the water in dough is not
enough. b). Check if the noise is made by
motor bearing.
Should call for professional technicians
TROUBLE SHOOTING
1
0
8. Electric leakage
a). Check if any damage on skins of
cables.
b). Check if any moisture in electrical
box.
c). Check if any damage on skins of
transformer caused by moisture or
other reasons.
d). Check if any electric leakage on
motor.
Should call for professional electricians.
9. Main shaft will stop unexpectedly
a). Check if any overload relay drops
or set value of current is changed.
b). Check if there is anything
abnormal on motor.
c). Check if there is something wrong
with operation panel.
Should call for professional electricians.
PARTS LIST
1
1
PARTS LIST
1
2
PARTS LIST
1
3
Parts Number
Part Code Part Name Specification
SM40L001 16KGLZA2-BS54 Emergency Switch
SM40L002 16MBLOMX-002-T1 Digital Control Panel
SM40L003 13SM40L-01D Machine Top Cover
SM40L004 11SM40L-48 Safety Grid
SM40L005 14SM40L-29 Bowl
SM40L006 11SM40L-110 Hook
SM40L007 14SM40L-108 Whipping Ball
SM40L008 13SM40L-107 Beater
SM40L009 16MDL40L-1 Motor 380V-50HZ-3PH 2.2KW 6P
SM40L010 16BPQ60L-1 Invertor SV300-405-H3
SM40L011 14SM40L-12B Main Shaft
SM40L012 14SM40L-105 Planetary Shaft
SM40L013 15ZCL6205VV Bearing 6205VV
SM40L014 14401-022C Internal Pinion
SM40L015 14401-021B Internal Drive Gear
SM40L016 15PDL1060 Belt 7M-1060
SM40L017 15PDL1150 Belt 7M-1150
SM40L018 15HQL38*1/2*12 Plastic Ball Ф38
SM40L019 14SM40L-23 Machine Foot Pad
SM40L020 14SM60L-33-02 Bowl Clamp
SM40L021 14SM60L-33-03 Bowl Clamp
SM40L022 14SM40L-122 Motor Pulley
SM40L023 15ZCL6006VV Bearing 6006VV
SM40L024 11SM40LB-25B Machine Body
SM40L025 14SM40L-14 Handle
SM40L026 14SM40L-33B Screw Bolt
SM40L027 16KGLTM1307 Microswitch
SM40L028 11SM40L-57qb Chute
SM40L029 15ZCL3056208VV Bearing 3056208VV
SM40L030 15ZCL3056307VV Bearing 3056307VV
SM40L031 13SM40L-05B Bearing Housing
SM40L032 15YFL32*55*7 Oil Seal
SM40L033 14401-003 Planetary Head
SM40L034 13SM40L-04 Lock Block
SM40L035 13SM40L-22B-01 Connecting Piece 20T*225*257 Q235
SM40L036 13SM40L-04 Lock Block
SM40L037 11SM40L-90 Adjusting Plate for Motor
SM40L038 14SM40L-15B Rotating Piece
SM40L039 15ZCLGD-1 Bearing
SM40L040 14SM40L-28 Pressure Plate
SM40L041 14SM40L-11 Rubber pad
PARTS LIST
1
4
SM40L042 14SM40L-19B Screw Bolt
SM40L043 14SM40L-28 Pressure Plate
SM40L044 15ZCLGD-2 Bearing
SM40L045 14SM40L-123 Transmission Pulley
SM40L046 14SM40L-121 Pulley
SM40L047 13SM40L-109-01 Bush
SM40L048 14A320-01 Spring
SM40L049 14SM40L-10 Screw
SM40L050 14SM40L-109-02 Bolt
SM40L051 15ZCL6007VV Bearing 6007VV
SM40L052 14SM40L-99 Transmission Shaft
SM40L053 14SM40L-38 Bush of Transmission Pulley
SM40L054 15ZCL6006VV Bearing 6006VV
SM40L055 14SM40L-34B Location Piece
SM40L056 13SM40L-22B-02 Sliding Plate 12T*45*65 Q235
SM40L057 16KGLTM1307 Microswitch
SM40L058 14SM401-160 Head Ring
SM40L059 11SM40L-21B Bowl Bracket
SM40L060 14SM40L-37 Gasket
SM40L061 14SM40L-82B Bearing Housing
WIRING DIAGRAM
1
5
MACHINE WARRANTY
1
6
Machine Warranty
We promise to offer our clients the best quality of products and service, our
guaranty period is one year dated from the delivery date.
The following terms are not included:
1. Abnormal operation or adjustment.
2. Sundries or corrosive liquid or wasted oil enter into the machine to make
short circuit and burnt out of internal components.
3. Damage caused by hard matter impact.
4. Disasters caused by nature reasons.
SINMAGSinmag Planetary Mixer
call: +91 9899332022 011 65666618
Now Available in INDIA
Authorised Distributor