voestalpine Profilafroid
www.voestalpine.com/profilafroid
Steel sheet pilesFor more than 50 years, voestalpine Profilafroid has designed and manufactured a wide range of sheet piles in all steel grades.
RANGE WITH LOCK
Section Reference Thickness(e)
Depth (H)
Effective width
(L)
Width(ℓ)
Angle(α)
Mass Modular section
Moment of inertia
mm mm mm mm ° Kg/ml Kg/m2 cm3/ml cm4/ml
CE430 D28199 3 37 333 135 60 10.78 32.39 42 84
CE435 D28476 3.5 38 333 135 60 12.58 37.77 48 98
CE440 D28200 4 38 333 136 60 14.38 43.18 54 112
L8 D28201 3.5 38 434 206 60 14.39 33.15 52 98
FLP400 D28475 5 74 333 190 75 21.66 65.00 167 642
FLP400 D28386 6 75 333 191 75 25.90 77.77 196 766
FLP500 D28474 5 74 494 229 75 28.02 56.72 156 621
FLP500 D28463 6 75 494 231 75 33.53 67.88 186 747
FLP600 D28184 3 127 600 212 48 19.73 32.90 156 1038
FLP600 D28081 3.5 128 600 215 48 23.08 38.30 183 1215
FLP600 DD9993 4 128 600 215 48 26.15 43.58 124 830
FLP600 D28082 5 129 600 215 48 32.72 54.10 257 1728
FLP600 D28068 6 130 600 215 48 38.80 64.60 306 2067
FLP700 D28477 4 147 700 310 60 31.40 44.85 276 2061
FLP700 D28380 5 148 700 310 60 39.40 56.20 343 2576
FLP700 D28080 6 149 700 310 60 47.20 66.90 409 3084
FLP700 D28000 7 150 700 310 60 54.34 77.60 474 3591
FLP700 D28056 7.5 151 700 310 60 58.22 83.17 507 3846
FLP700 D28001 8 151 700 310 60 61.90 88.45 540 4100
FLP750 D28639 6 283 750 271 60 57.46 76.60 788 11375
FLP750 D28640 7 284 750 272 60 67.00 89.30 912 13263
FLP750 D28641 8 285 750 273 60 76.60 102.00 1044 15170
FLP840 D28642 6 250 840 270 50 57.46 68.40 617 7832
FLP840 D28643 7 251 840 271 50 67.00 79.76 718 9128
FLP840 D28644 8 252 840 272 50 76.61 91.20 817 10474
Surface treatment
Our sections can be delivered with pre applied coatings including standard primers, multi-pack paint systems and hot dip galvanizing to EN ISO 1461. Applying a surface protection system not only reduces corrosion but also improves the appearance of your product which can be an interesting compromise between cost and life expectancy.
Possibility of delivery in long lengths (>10 meters).
Locks
Each sheet pile has locks conforming to EN 10249-2.
Each section could be adapted to your foundation geometries.
• Large deflection angle• Resistance to opening• Resistance to movement and unlocking
eH
L
ℓ
α
RANGE WITHOUT LOCK
Section Reference Thickness (e)
Depth(H)
Effective width
(L)
Mass Modular section
Moment of inertia
mm mm mm Kg/ml Kg/m2 cm3/ml cm4/ml
CR430 D22601 3 34 330 9.72 29.45 40 68
CR435 D28130 3.5 34.50 330 11.34 34.36 46 79
CR440 D12889 4 35 330 12.96 39.29 52 91
CR445 D28233 4.5 35.50 330 14.53 44.04 57 103
CR450 D22864 5 36 330 16.09 48.76 63 114
KD400 D28478 5 49 400 18.52 46.30 84 208
KD400 D28404 5.5 49.50 400 20.37 50.92 91 229
KD400 D28384 6 50 400 22.23 55.57 99 250
KD500 D28472 5 49 500 22.45 44.90 86 215
KD500 D28473 6 50 500 26.94 53.88 101 258
KD600 D28090 6 78 600 37.50 62.00 184 718
KD600 D27909 8 80 600 50.00 83.00 237 947
KD600 D62651 9 81 600 55.53 92.55 263 1066
KD750 D62650 5 91 742 33.79 45.54 163 745
KD750 D62634 6 92 742 40.90 54.66 194 893
KD750 D62676 6.5 92.50 742 43.72 58.90 209 967
KD750 D62635 7 93 742 47.03 63.40 224 1042
KD750 D62677 7.5 93.50 742 50.30 67.80 239 1116
KD750 D62632 8 94 742 53.56 72.18 254 1197
KD750 D62685 9 95 742 60.26 81.21 283 1346
GradeTensile
strengthN/mm²
Yield strenghtMinimum value
N/mm²
Elongation
S 235 JR 360/510 235 26%
S 275 JR 410/460 275 23%
S 355 JO 470/630 355 22%
S 500 MC 550/700 500 14%
The manufacture of range with lock (EN 10249) and range without lock (EN 10162)
(Other grades on request)
Slinging hole
Our sections are delivered with a 40 mm Ø slinging hole at 145, 150, 160, 250 or 300 mm from one end, according to yourrequest. Other drilling can be arranged by prior agreement.
On depth :H < 100 mm ± 2 mm
100 > H ≤ 150 mm ± 3mmOn width : ± 2%
On length : L - 0 + 50 mm
Straightness :2 mm / m
Twist :1°/m
Thickness according to EN 10051 : e ≤ 3 mm ± 0.22 mm3 > e ≤ 4 mm ± 0.24 mm4 > e ≤ 6 mm ± 0.26 mm5 > e ≤ 6 mm ± 0.28 mm6 > e ≤ 8 mm ± 0.30 mm
Tolerances
eH
L
Steel qualities
voestalpine Profilafroid2, rue de Beauvais60930 Bailleul-sur-Thérain, FranceT. +33 3 44 07 51 11F. +33 3 44 07 65 34Email: [email protected]/profilafroid
Required design working life 5 years 25 years 50 years 75 years 100 years
Common fresh water (river, ship canal, ...) in the zone of high attack (water line)
0,15 0,55 0,90 1,15 1,40
Very polluted fresh water (sewage, industrial effluent, ...) in the zone of high attack (water line)
0,30 1,30 2,30 3,30 4,30
Sea water in temperate climate in the zone of high attack (low water and splash zones)
0,55 1,90 3,75 5,60 7,50
Sea water in temperate climate in the zone of permanent immersion or in the intertidal zone
0,25 0,90 1,75 2,60 3,50
Note: The values given for 5 and 25 years are based on measurements, whereas the other values are extrapolated.
Extracts of Eurocode 3 - Part 5 (EN 1993-5:2007 (E))
Table 4-1: Recommended value for the loss of thickness [mm] due to corrosion for piles and sheet piles in soils, with or without groundwater
Table 4-2: Recommended value for the loss of thickness [mm] due to corrosion for piles and sheet piles in fresh water or in sea water
Required design working life 5 years 25 years 50 years 75 years 100 years
Undisturbed natural soils (sand, silt, clay, schist, ...) 0,00 0,30 0,60 0,90 1,20
Polluted natural soils and industrial sites 0,15 0,75 1,50 2,25 3,00
Aggressive natural soils (swamp, marsh, peat, ...) 0,20 1,00 1,75 2,50 3,25
Non-compacted and non-aggressive fills (clay, schist, sand, silt, ...) 0,18 0,70 1,20 1,70 2,20
Non-compacted and aggressive fills (ashes, slag, ...) 0,50 2,00 3,25 4,50 5,75
Notes:1) Corrosion rates in compacted fills are lower than those in non-compacted ones. In compacted fills the figures in the table should be divided by two.2) The values given for 5 and 25 years are based on measurements, whereas the other values are extrapolated.