Till Schrauben GmbH Stahl- und Edelstahlschrauben Stahlbaustrasse 32 64560 Riedstadt-Goddelau Tel.: 06158 9222-0 Fax.: 06158 9222-29 [email protected]
Till Schrauben GmbH Stahl- und Edelstahlschrauben Stahlbaustrasse 32 64560 Riedstadt-Goddelau Tel.: 06158/9222-0 Fax.: 06158/9222 29 E-Mail: [email protected] Internet: www.tillschrauben.de
Seit über 65 Jahren – Spezialist für starke Verbindungen
Qualitätssystem nach DIN EN ISO 9001-2015 Lieferung in allen Abmessungen und Werkstoffen für Industrie, Handwerk und Handel:
• SCHRAUBEN • MUTTERN • NORMTEILE • ZEICHNUNGSTEILE • ZUBEHÖR
Standardabmessungen aus Lagervorrat (ca. 36.000 Sorten), bzw. kurzfristige Lieferzeiten! Außerdem:
• Dübeltechnik • BOHRER UND GEWINDEWERKZEUGE • SCHLEIF- UND TRENNSCHEIBEN • SCHÄUME UND DICHTSTOFFE • TECHNISCHE SPRAYS
Unser besonderer Service:
• WARENBEWIRTSCHAFTUNGSSYSTEME Kanban-System Scannerbestellsystem
Sprechen Sie uns an! Wir sind für Sie da.
Verkauf und Lieferbedingungen der Till Schrauben GmbH, Stand Mai 2019 1. Allgemeines Die nachstehenden Bedingungen gelten für alle unsere Angebote, Kauf-, Werklieferungs- und Werkverträge einschließlich Beratungen und sonstigen vertraglichen Leistungen, auch wenn im Einzelfall nicht nochmals auf sie Bezug genommen wird, sofern der Käufer Unternehmer ist. Allgemeine Einkaufsbedingungen des Käufers werden nicht anerkannt. Die Verkaufsbedingungen des Lieferers werden mit Auftragsbestätigung des Lieferers Vertragsbestandteil, spätestens mit Annahme der Lieferung.
2. Angebot und Vertragsabschluss Unsere Angebote sind freibleibend. Ein Vertrag kommt mit unserer schriftlichen Auftragsbestätigung oder der Ausführung der Lieferung durch uns zustande.
3. Preisstellung Preise verstehen sich ab Lager Riedstadt. Zur Berechnung gelangen bei in unseren Katalogen oder Prospekten aufgeführte Waren die am Tage der Lieferung gültigen Listenpreise, sofern die Lieferung vereinbarungsgemäß erst sechs Wochen nach Bestellung oder später erfolgt. Für Waren, die auf Wunsch des Käufers angefertigt werden, gilt folgende Preisanpassungsklausel: Für den Fall, dass sich nach Vertragsabschluss und vor Lieferung Kalkulationsbeeinflussende Kostenfaktoren wesentlich erhöhen, behalten wir uns eine angemessene Preisanpassung vor, sofern eine Preisbindung nicht ausdrücklich vereinbart wurde und Preise in Angeboten und Auftragsbestätigungen nicht ausdrücklich als Festpreise ausgewiesen wurden. Falls wir die Preise in einem solchen Fall erhöhen, steht dem Käufer ein Sonderkündigungsrecht zu, das zur wirksamen Ausübung innerhalb einer Frist von 7 Tagen ab Mitteilung von der Preiserhöhung ausgeübt werden muss. Preisvereinbarungen gelten jeweils nur für den einzelnen Auftrag. Bei Folgeaufträgen ist der Preis jeweils neu zu verhandeln. Alle Preise gelten zuzüglich der jeweils gesetzlichen Umsatzsteuer. Unabhängig von ggf. vereinbarten Zuschlägen setzten ausgewiesene Listenpreise die Lieferung in vollständigen Verpackungseinheiten voraus. Auf- oder Abrundungen auf die nächste Verpackungseinheit bleiben ausdrücklich vorbehalten. Der Mindestauftragswert beträgt € 7,50, der Mindestpositionswert € 2.50.
4. Versand /Gefahrtragung Ist nichts anderes vereinbart, erfolgt die Lieferung EXW (ex works, incoterms 2010) Riedstadt Lager. Der Versand erfolgt auch bei im Einzelfall ggf. vereinbarter frachtfreier Lieferung auf Gefahr des Käufers. Wird versandfertig gemeldete Ware nicht vertragsgemäß abgenommen, geht mit Anzeige der Versandbereitschaft die Gefahr auf den Käufer über und der Kaufpreis wird fällig. Wir sind dann berechtigt, die Ware auf Kosten und Gefahr des Käufers nach eigenem Ermessen zu lagern.
5. Zahlungsbedingungen Wird Skonto eingeräumt, darf dieser nur abgezogen werden, wenn bis dahin alle früheren Rechnungen beglichen sind. Wird nach Vertragsabschluss erkennbar, dass unser Anspruch auf Zahlung durch mangelnde Leistungsfähigkeit des Käufers gefährdet ist, sind wir berechtigt, sämtliche offene Forderungen sofort fällig zu stellen, auch soweit Schecks hereingegeben wurden. Dies gilt nicht, soweit wir noch nicht die uns obliegende Gegenleistung erbracht haben. Einwendungen und Einreden des Käufers bleiben – mit Ausnahme der Einwendung der Vereinbarung eines späteren Fälligkeitszeitpunkts – unberührt. Wir sind dann ferner berechtigt, ausstehende Lieferungen von Vorauszahlungen oder geeigneten Sicherheiten abhängig zumachen und von allen Verträgen, soweit sie noch nicht erfüllt sind, ganz oder teilweise zurückzutreten, wenn einer Aufforderung, Vorauszahlungen oder Sicherheiten zu leisten, binnen angemessener Frist nicht nachgekommen wird. Aufrechnungs- und Zurückbehaltungsrechte stehen dem Käufer nur zu, wenn und soweit seine Gegen Ansprüche entweder im Gegenseitigkeitsverhältnis (§ 320 BGB) zu den von uns geltend gemachten Ansprüchen stehen oder rechtskräftig festgestellt, unbestritten oder von uns anerkannt sind. Zudem ist der Käufer zur Ausübung eines Zurückbehaltungsrechts nur insoweit befugt, als sein Gegenanspruch auf dem gleichen Vertragsverhältnis beruht.
6. Eigentumsvorbehalt Die gelieferte Ware bleibt bis zur vollständigen Bezahlung sämtlicher Forderungen aus der Geschäftsverbindung, gleich aus welchem Rechtsgrund und bis zur Einlösung von Schecks sowie bis zur Unwiderruflichkeit von Lastschriften unser Eigentum. Die Zahlung an uns ist erst mit befreiender Wirkung erfolgt, wenn der Betrag vollständig bei uns eingegangen ist. Die Bearbeitung oder Verarbeitung der Vorbehaltsware erfolgt für uns, ohne dass uns hieraus Verpflichtungen erwachsen. Wird die von uns gelieferte Ware mit in fremdem Eigentum stehender Ware verarbeitet, verbunden oder vermischt, steht uns das Miteigentum an der neuen Sache oder dem vermischten Bestand im Verhältnis des Wertes unserer Vorbehaltsware zu den übrigen Waren zum Zeitpunkt der Verarbeitung, Verbindung oder Vermischung zu. Erwirbt der Käufer das Alleineigentum an der neuen Sache, überträgt er uns schon jetzt das Miteigentum an der neuen Sache im Verhältnis des Rechnungswertes unserer Vorbehaltsware zum Wert der übrigen Waren im Zeitpunkt der Verarbeitung, Verbindung oder Vermischung und verwahrt diese mit kaufmännischer Sorgfalt für uns. Der Käufer, dem die Weiterveräußerung nur im ordnungsgemäßen Geschäftsgang und nur dann gestattet ist, wenn die Forderung aus dem Weiterverkauf auf uns übergeht, tritt sämtliche Forderungen aus der Weiterveräußerung, gleich ob die Veräußerung ohne oder nach Verarbeitung oder Verbindung oder Vermischung unserer Ware mit anderen Waren erfolgt, hiermit an uns ab. Wir nehmen die Abtretung an. Wert der Vorbehaltsware ist unser Rechnungsbetrag zzgl. Eine Sicherungsaufschlages von 10%, der jedoch außer Ansatz bleibt, soweit ihm Rechte Dritter entgegenstehen. Im Falle der Weiterveräußerung unserer Ware nach Verarbeitung, Verbindung oder Vermischung oder der Weiterveräußerung der durch Verarbeitung, Verbindung oder Vermischung entstandenen neuen Sache wird die Forderung gegen den Abnehmer des Käufers in Höhe des Rechnungswertes unserer verarbeiteten, verbundenen oder vermischten Ware abgetreten oder nur in Höhe des Betrages, der unserem Anteil am Miteigentum entspricht, falls dieser niedriger ist. Das gilt auch im Falle der Veräußerung, nachdem unsere Ware durch Verbindung, Verarbeitung oder Vermischung mit anderen uns nicht gehörenden Sachen wesentlicher Bestandteil einer anderen Sache geworden ist. Der Käufer wir von uns mit dem Vorbehalt des jederzeitigen Widerrufs berechtigt, die abgetretenen Forderungen einzuziehen. Die Kosten der Einziehung gehen zu Lasten des Käufers. Der Käufer muss uns eine Pfändung oder jede andere Beeinträchtigung unserer Rechte sofort anzeigen. Verpfändung oder Sicherungsübereignungen unserer Vorbehaltsware sind dem Käufer untersagt. Übersteigt der Wert der uns gegebenen Sicherheiten unsere Forderungen um insgesamt mehr als 10%, sind wir auf Verlagen des Käufers zur Freigabe von Sicherheiten unserer Wahl verpflichtet. Mit Tilgung aller unserer Forderungen aus der Geschäftsverbindung gehen das Eigentum an der Vorbehaltsware und die abgetretenen Forderungen auf den Käufer über.
7. Mängelhaftung: Mehr- und Minderlieferung bei Spezialanfertigungen Ist der Käufer Kaufmann, besteht die Untersuchungs- und Rügeobliegenheit des & 377 HGB mit der Maßgabe, dass nur Mängelanzeigen innerhalb von 7 Tagen ab Entdeckung eines Mangels bzw. ab dem Zeitpunkt, zu dem dieser bei tunlicher Untersuchung entdeckt worden wäre, als unverzüglich anzusehen sind. Schrauben, Muttern und andere Gewinde- und Normteile werden von uns nicht nach den einschlägigen technischen Normen geliefert, sofern nicht Sondervereinbarungen getroffen wurden. Für nachweislich im Zeitpunkt des Gefahrübergangs fehlerhafte Ware liefern wir nach unserer Wahl kostenlos Ersatz oder bessern nach. Weitergehende Rechte bestehen nach Maßgabe des Gesetzes und den in diesen Geschäftsbedingungen enthaltenen Regelungen. Bei Sonderanfertigungen besteht bei eventuell anfallenden Mehr- oder Minderlieferungen bis zu 10% kein Anspruch auf Zurücknahme bzw. Nachlieferung der Quantitäten. Mängelansprüche gem. § 437 BGB verjähren 12 Monate ab Ablieferung. Dies gilt nicht für Schadensersatzansprüche und weiter nicht bei einer Sache, die entsprechend ihrer üblichen Verwendungsweise für ein Bauwerk verwendet worden ist und die die Mangelhaftigkeit des Bauwerks verursacht hat. Liegt bei dem Verkauf vom Letztverkäufer an den Endverbraucher ein Verbrauchgüterkauf gem. § 474 BGB vor, gelten für die Regressansprüche des Käufers gegen uns die gesetzlichen Vorschriften.
Wichtiger Hinweis für galvanisch verzinkte Ware. Bei galvanischen Überzügen auf hochfesten und federharten Teilen (>=1000 N/mm² bzw. >= 320 HV) besteht die Gefahr der Wasserstoffversprödung. Trotz entsprechender Maßnahmen zur Vermeidung kann ein Restrisiko nicht ausgeschlossen werden (siehe u. a. ISO 4042 und DIN 50969-1) Galvanische Überzüge auf derartigen Teilen werden nur auf Wunsch und auf das Risiko des Bestellers ausgeführt.
8. Allgemeine Haftung: Aufwendungsersatz Schadensersatzansprüche jeglicher Art gegen uns sind ausgeschlossen, es sei denn, es liegt Vorsatz oder grobe Fahrlässigkeit oder die Verletzung einer wesentlichen Vertragspflicht vor. Unter einer wesentlichen Vertragspflicht in diesem Sinne ist jede Pflicht gemeint, deren Erfüllung die ordnungsgemäße Durchführung des Vertrags überhaupt erst ermöglicht und auf deren Einhaltung der Käufer regelmäßig vertrauen darf. Die Haftung beschränkt sich jedoch auf den Ersatz des vertragstypischen, vorhersehbaren Schadens, sofern nicht Vorsatz vorliegt. Die vorstehenden Haftungsbeschränkungen und Haftungsausschlüsse gelten nicht für eine Haftung nach dem Produkthaftungsrecht oder für Fälle der Verletzung von Leben, Körper oder Gesundheit. Aufwendungsersatzansprüche des Käufers nach § 284 BGB sind insoweit abbedungen, als ein Anspruch auf Ersatz des Schadens statt der Leistung nach den vorstehenden Regelungen ausgeschlossen ist.
9. Lieferung und Lieferfristen: Vorbehalt der Selbstbelieferung und des Vorliegens behördlicher Genehmigungen Angegebene Lieferfristen beginnen erst mit der Erfüllung aller notwendigen und/ oder vereinbarten Voraussetzungen. Hierunter fallen insbesondere und ohne Beschränkung darauf vereinbarte Vorauszahlungen, Musterfreigaben, beizustellende Unterlagen und/oder die abschließende Klärung aller mit dem Vertragsgegenstand verbundenen technischen Fragen. Richtige und rechzeitige Selbstbelieferung bleibt vorbehalten. Zeit- und mengengerechte Teillieferungen sind zulässig und können getrennt abgerechnet werden. Verhindern höhere Gewalt, Arbeitskampfmaßnahmen oder deren Auswirkungen oder sonstige Ereignisse, die wir trotz der nach den Umständen zumutbaren Sorgfalt nicht abwenden können – gleich, ob bei uns oder unsere Vorlieferanten eingetreten – die Erfüllung unserer Lieferpflicht, verlängert sich die Lieferfrist um die Dauer der Verzögerung. Wird durch derartige Ereignisse die Lieferung nachträglich für eine der Parteien unzumutbar, ist diese zum Rücktritt vom Vertrag berechtigt. Ware auf Abruf ist in möglichst gleichmäßigen Zeiträumen und Mengen abzunehmen, spätestens aber, wenn nichts anderes vereinbart ist, innerhalb von 10 Wochen nach Bestelldatum. Geschieht letzteres nicht, sind wir nach Setzen einer Frist von 2 Wochen unbeschadet anderweitiger Rechte berechtigt, die Ware in Rechnung zu stellen. Bei Lieferverzug ist der Käufer unter den gesetzlichen Voraussetzungen zum Rücktritt berechtigt. Kommen wir mit der Lieferung in Verzug und erwächst dem Käufer hieraus ein Schaden, ist er unter Ausschluss des Ersatzes weitergehender Verzugsschäden berechtigt, eine pauschale Verzugsentschädigung zu verlange. Die beträgt für jede volle Woche der Verzögerung 0,5%, insgesamt aber maximal 5% des Wertes desjenigen Teils der Gesamtlieferung, der infolge der Verzögerung nicht rechtzeitig oder nicht vertragsgemäß in Benutzung genommen werden kann. Vertragsabschlüsse mit Kaufleuten erfolgen unter Vorbehalt der Selbstbelieferung und des Vorliegens etwa notwendiger behördlicher Genehmigungen.
10. Rücknahmepflichten für Transport- und Verkaufsverpackungen Der Käufer ist berechtigt, Transportverpackungen (Verpackungen, die den Transport von Waren erleichtern, die Waren auf dem Transport vor Schäden bewahren oder die aus Gründer der Sicherheit des Transports verwendet werden und bei uns anfallen) unentgeltlich zurückzugeben. Ort der Rückgabe ist an unserem Geschäftssitz. Soweit wir nach § 6 Verpackungsverordnung verpflichtet sind, die Rücknahme von Verkaufsverpackungen (Verpackungen, die als eine Verkaufeinheit angeboten werden und beim Endverbraucher anfallen einschließlich solcher Verpackungen, die die Übergabe von Waren an den Endverbraucher ermöglichen oder unterstützen – Serviceverpackungen- ), die beim privaten Endverbraucher im Sinne der Verpackungsverordnung anfallen, zu gewährleisten, entsprechen wir dieser Pflicht insbesondere durch die Zusammenarbeit mit einem spezialisierten Rücknahmesystembetreiber. Soweit wir nach § 7 Verpackungsverordnung verpflichtet sind, Verkaufsverpackungen, die nicht beim privaten Endverbraucher im Sinne der Verpackungsverordnung anfallen, unentgeltlich zurückzunehmen, ist Ort der Rückgabe von Verpackungen an unserem Geschäftssitz. Die Rückgabe von Verpackungen nach den vorstehenden Absätzen kann ausschließlich während unserer Geschäftszeiten erfolgen. Größere Mengen sind vorher anzukündigen. Die zurückgegebenen Verpackungen müssen sauber und frei von Fremdstoffen sein. Anderenfalls steht uns ein Anspruch auf Ersatz der bei der Entsorgung entstehenden Mehrkosten zu.
11. Kataloge, Zeichnungen, Erstmuster etc. In (auch elektronischen) Katalogen, Preislisten oder in den zu einem Angebot gehörenden Unterlagen enthaltene Angaben, Abbildungen, Muster Zeichnungen, technische Angaben und Daten und Verwendungsempfehlungen sind unverbindlich. Sie befreien den Käufer nicht von der eigenen Verpflichtung zur Prüfung der Ware auf ihre Eignung für beabsichtigte Einsatzzwecke und Verfahren. Diese Angaben werden erst dann Vertragsbestandteil, wenn sie von uns ausdrücklich als verbindlicht bestätigt sind. Beschaffenheitsgarantien sind nur diejenigen bestätigten technischen Angaben, die von uns in der Auftragsbestätigung oder in einem anderen Vertragsdokument als solche ausdrücklich bezeichnet sind. Anwendung, Verwendung und Verarbeitung der bezogenen Ware liegen ausschließlich in der Verantwortung des Käufers. Reicht der Käufer Unterlagen wie Zeichnungen, Muster etc. ein, die technische Mängel enthalten, haftet er für die Folgen dieser Mängel allein. An Abbildungen, Zeichnungen und sonstigen technischen Unterlagen stehen uns die Eigentums- und Urheberrechte zu. Ohne unsere Zustimmung dürfen diese nur für die vertraglich vorgesehenen Zwecke verwendet und Dritten nicht zugänglich gemacht werden. Wird im Falle einer vereinbarten Erstbemusterung vom Besteller auf eine Freigabe verzichtet oder erfolgt an deren Stelle eine Bestellung oder ein Lieferabruf, so gilt die Freigabe für den bestellten oder abgerufenen Artikel als vom Besteller erteilt. Die dem Erstmuster qualitativ entsprechenden, gelieferten Produkte gelten als vertragsgemäß.
12. Besonderheiten für die Bestellung im Internet und elektronische Kataloge Mit der Registrierung des Käufers als Internetkäufer ist die Erklärung seines Einverständnisses mit der Geltung dieser Allgemeinen Geschäftsbedingungen verbunden. Die Präsentation von Produkten im Internet und in elektronischen Katalogen stellt kein bindendes Angebot im Internet durch uns dar, sondern dient nur dazu, den Käufer zur Anfrage eines unverbindlichen Angebotes zu motivieren. Um ein bindendes Angebot abgeben zu könne, muss der Käufer als Internetkäufer registriert sein. Mit dem Absenden der Bestellung gibt der Käufer ein bindendes Angebot für den Vertragsabschluss ab. Ein Vertragsabschluss kommt nur durch unsere Auftragsbestätigung per E-Mail oder in schriftlicher Form oder durch Lieferung der Ware durch uns zustande. Die im Internet, in elektronischen Katalogen, Marktplätzen u.ä. hinterlegten Lieferzeiten sind pauschalierte Richtwerte und unverbindlich.
13. Geheimhaltung Jeder Vertragspartner wird alle Unterlagen (dazu zählen auch Muster, Modelle und Daten) und Kenntnisse, die er aus der Geschäftsverbindung erhält, nur für die gemeinsam verfolgten Zwecke verwenden und mit der gleichen Sorgfalt wie entsprechende eigene Unterlagen und Kenntnisse gegenüber Dritten geheim halten, wenn der andere Vertragspartner sie als vertraulich bezeichnet oder an ihrer Geheimhaltung ein offenkundiges Interesse hat. Diese Verpflichtung beginnt ab erstmaligem Erhalt der Unterlagen oder Kenntnisse und endet 36 Monate nach Ende der Geschäftsverbindung. Die Verpflichtung gilt nicht für Unterlagen und Kenntnisse, die allgemein bekannt sind oder die bei Erhalt dem Vertragspartner bereits bekannt waren, ohne dass er zur Geheimhaltung verpflichtet war, oder die danach von einem zur Weitergabe berechtigten Dritten übermittelt werden oder die von dem empfangenen Vertragspartner ohne Verwertung geheim zuhaltender Unterlagen oder Kenntnis des anderen Vertragspartner entwickelt werden.
14. Erfüllungsort, Gerichtsstand, Sonstiges Erfüllungsort für alle Pflichten aus dem Vertrag ist Riedstadt. Ausschließlicher Gerichtsstand für Streitigkeiten mit Kaufleuten, juristischen Personen des öffentlichen Rechts oder Personen, die keinen allgemeinen Gerichtsstand im Inland haben, ist unser Geschäftssitz. Wir behalten uns jedoch vor, eine Klage nach unserer Wahl auch an dem für den Sitz des Käufers zuständigen Gerichtsstand einzureichen. Hat der Käufer seinen Sitz außerhalb des Europäischen Wirtschaftsraum (EWR) und der Europäischen Freihandelszone (EFTA), gelten die beiden vorstehenden Sätze nicht. In diesem Fall werden stattdessen alle Streitigkeiten, die sich im Zusammenhang mit dem Vertrag oder über seine Gültigkeit ergeben, nach der Schiedsgerichtsordnung der Deutschen Institution für Schiedsgerichtsbarkeit e.V. (DIS) unter Ausschluss des ordentlichen Rechtsweges endgültig entschieden. Schiedsort ist Riedstadt, Verfahrenssprache ist deutsch. Es gilt deutsches Recht. Die Bestimmungen des UN-Kaufrechts sind ausgeschlossen. Stand: Mai 2019
ProduktübersichtNorm Bezeichnung Material Oberfläche
AM Abstandsbolzen A mit Innen/Außengewinde Stahl verz. blau ab Seite 1
Messing vernickelt ab Seite 2
BM Abstandsbolzen B mit Innen/Innengewinde Stahl verz. blau ab Seite 3
Messing vernickelt ab Seite 4
FBS Fassadenbauschrauben Typ A A2 mit 16mm Dichtsch.
A2 blank ab Seite 5
FBS Fassadenbauschrauben Typ BZ A2 mit 16mm Dichtsch.
A2 blank ab Seite 6
SBS Schnellbauschrauben mit Grobgewinde, Trompetenkopf
10.9 phosphatiert ab Seite 7
SPS Spenglerschrauben mit Dichtscheibe 15 mm mit TX A2 blank ab Seite 8
A9022 Kotflügelscheiben HV100 verz. blau ab Seite 9
A2 blank ab Seite 10
A9055 Scheiben mit Neoprendichtung A2 blank ab Seite 11
HECO Heco-Span Senkkopf mit Zahngeometrie und TX Stahl verz. blau ab Seite 12
HECO Multi-Monti plus Schraubanker 10.9 verz. blau ab Seite 14
HECO Multi-Monti plus Schraubanker 10.9 verz. blau ab Seite 16
HECO Multi-Monti plus Schraubanker 10.9 verz. blau ab Seite 15
Ensat Ensatbuchsen gehärtet verz. blau ab Seite 17
A1 blank ab Seite 18
A2 blank ab Seite 19
Art. 48 Ösenschrauben mit metrischem Gewinde Art. 48 Stahl verz. blau ab Seite 20
1 Kegelstifte, Form B, gedreht Stahl blank ab Seite 21
7 Zylinderstifte Toleranzfeld h8 Stahl blank ab Seite 23
7 Zylinderstifte Toleranzfeld m6 Stahl blank ab Seite 24
A1 blank ab Seite 26
04 / 2019 I
Norm Bezeichnung Material Oberfläche
84 Zylinderschrauben mit Schlitz 4.8 verz. blau ab Seite 27
A2 blank ab Seite 29
85 Flachkopfschrauben mit Schlitz 4.8 verz. blau ab Seite 31
A2 blank ab Seite 32
93 Scheiben mit Lappen HV100 blank ab Seite 33
A2 blank ab Seite 34
94 Splinte Stahl verz. blau ab Seite 35
A2 blank ab Seite 36
125 A Scheiben Form A A2 blank ab Seite 37
127 B Federringe Form B Stahl brüniert ab Seite 38
Stahl verz. blau ab Seite 39
A2 blank ab Seite 40
128 A Hochspann-Federringe Form A Stahl brüniert ab Seite 41
Stahl verz. blau ab Seite 42
A2 blank ab Seite 43
137 A Federscheiben Form A, gewölbt Stahl brüniert ab Seite 44
Stahl verz. blau ab Seite 45
A2 blank ab Seite 46
137 B Federscheiben Form B, gewellt Stahl brüniert ab Seite 47
Stahl verz. blau ab Seite 48
A2 blank ab Seite 49
172 Bundbohrbuchse HM geschliffen ab Seite 50
179 Bohrbuchse HM geschliffen ab Seite 55
315 Flügelmuttern Stahl verz. blau ab Seite 60
A2 blank ab Seite 61
316 Flügelschrauben Stahl verz. blau ab Seite 62
A2 blank ab Seite 63
338 HSS-Spiralbohrer HSS geschliffen ab Seite 64
HSSE geschliffen ab Seite 65
431 Rohrmuttern 5.8 blank ab Seite 66
432 Scheiben mit Außennase HV100 blank ab Seite 67
HV100 verz. blau ab Seite 68
A2 blank ab Seite 69
433 Scheiben HV140 verz. blau ab Seite 70
A2 blank ab Seite 71
II 04 / 2019
Norm Bezeichnung Material Oberfläche
434 Scheiben vierkant für U-Träger Neigung 8% 100 HV HV100 verz. blau ab Seite 72
HV100 tzn ab Seite 73
435 Scheiben vierkant für I-Träger Neigung 14% 100 HV HV100 verz. blau ab Seite 74
HV100 tzn ab Seite 75
436 Scheiben vierkant vorwiegend für Holzkonstruktione HV100 verz. blau ab Seite 76
439 Sechskantmuttern niedrige Form 04 blank ab Seite 77
04 verz. blau ab Seite 78
A2 blank ab Seite 79
439 Sechskantmuttern niedrige Form Feingewinde 04 blank ab Seite 80
04 verz. blau ab Seite 81
440 Scheiben vorwiegend für Holzkonstruktionen Form R Stahl verz. blau ab Seite 82
444 Augenschrauben Form B 4.8 blank ab Seite 83
462 Sicherungsbleche mit Innennase für Nutmuttern DIN HV100 blank ab Seite 84
463 Scheiben mit 2 Lappen HV100 blank ab Seite 85
464 Hohe Rändelschrauben 5.8 blank ab Seite 86
5.8 verz. blau ab Seite 87
A2 blank ab Seite 88
466 Hohe Rändelmuttern 5.8 blank ab Seite 89
5.8 verz. blau ab Seite 90
A2 blank ab Seite 91
467 Flache Rändelmuttern 5.8 blank ab Seite 92
5.8 verz. blau ab Seite 93
A2 blank ab Seite 94
471 Sicherungsringe für Wellen Stahl brüniert ab Seite 95
A2 blank ab Seite 96
472 Sicherungsringe für Bohrungen Stahl brüniert ab Seite 97
A2 blank ab Seite 98
508 T-Nutensteine 8 blank ab Seite 99
10 blank ab Seite 100
562 Vierkantmuttern niedrige Form 4.8 verz. blau ab Seite 101
571 Sechskant-Holzschrauben Stahl verz. blau ab Seite 102
A2 blank ab Seite 103
04 / 2019 III
Norm Bezeichnung Material Oberfläche
580 Ringschrauben C15E blank ab Seite 104
C15E verz. blau ab Seite 105
A2 blank ab Seite 106
582 Ringmuttern C15E blank ab Seite 107
C15E verz. blau ab Seite 108
A2 blank ab Seite 109
603 Flachrundschrauben mit Vierkantansatz Stahl verz. blau ab Seite 110
A2 blank ab Seite 111
653 Flache Rändelschrauben 5.8 blank ab Seite 112
5.8 verz. blau ab Seite 113
705 Stellringe Form A mit Gewindestiften Stahl blank ab Seite 114
Stahl verz. blau ab Seite 115
A2 blank ab Seite 116
906 Verschlußschrauben mit Innensechskant 5.8 blank ab Seite 117
5.8 verz. blau ab Seite 119
908 Verschlußschrauben mit Bund und Innensechskant 5.8 blank ab Seite 121
5.8 verz. blau ab Seite 123
910 Verschlußschrauben mit Bund und Außensechskant 5.8 blank ab Seite 125
5.8 verz. blau ab Seite 127
911 Sechskantstiftschlüssel vergütet 10.9 brüniert ab Seite 129
923 Flachkopfschrauben mit Schlitz und Ansatz 5.8 blank ab Seite 130
928 Vierkant-Schweißmuttern 8 blank ab Seite 131
929 Sechskant-Schweißmuttern 8 blank ab Seite 132
A2 blank ab Seite 133
931 Sechskantschrauben mit Schaft 8.8 brüniert ab Seite 134
8.8 verz. blau ab Seite 137
10.9 brüniert ab Seite 139
A2 blank ab Seite 141
933 Sechskantschrauben mit Gewinde bis Kopf 8.8 brüniert ab Seite 143
8.8 verz. blau ab Seite 146
10.9 brüniert ab Seite 149
10.9 verz. blau ab Seite 150
A2 blank ab Seite 152
934 Sechskantmuttern 8 blank ab Seite 155
8 verz. blau ab Seite 156
8 tzn ab Seite 157
10 brüniert ab Seite 158
10 verz. blau ab Seite 159
A2 blank ab Seite 160
934 Sechskantmuttern Linksgewinde 8 blank ab Seite 161
8 verz. blau ab Seite 162
A2 blank ab Seite 163
IV 04 / 2019
Norm Bezeichnung Material Oberfläche
938 Stiftschrauben Einschraubende ca. 1 d 5.8 blank ab Seite 164
8.8 brüniert ab Seite 165
8.8 verz. blau ab Seite 166
939 Stiftschrauben Einschraubende ca. 1,25 d 5.8 blank ab Seite 167
5.8 verz. blau ab Seite 168
8.8 brüniert ab Seite 169
8.8 verz. blau ab Seite 170
A2 blank ab Seite 171
960 Sechskantschrauben mit Schaft Feingewinde 8.8 brüniert ab Seite 172
8.8 verz. blau ab Seite 173
10.9 brüniert ab Seite 174
961 Sechskantschrauben mit Gewinde bis Kopf Feingewind
8.8 brüniert ab Seite 175
8.8 verz. blau ab Seite 176
10.9 brüniert ab Seite 177
963 Senkschrauben mit Schlitz 4.8 verz. blau ab Seite 178
A2 blank ab Seite 180
965 Senkschrauben mit PH-Kreuzschlitz 4.8 verz. blau ab Seite 182
A2 blank ab Seite 183
965 Senkschrauben mit TX 4.8 verz. blau ab Seite 184
A2 blank ab Seite 185
966 Linsensenkschrauben mit PH-Kreuzschlitz 4.8 verz. blau ab Seite 186
A2 blank ab Seite 187
976 Gewindestange 4.8 blank ab Seite 188
4.8 verz. blau ab Seite 189
8.8 blank ab Seite 190
8.8 verz. blau ab Seite 191
A2 blank ab Seite 192
980 Sechskantmuttern mit Klemmteil, Form V, Ganzmetall 8 verz. blau ab Seite 193
A2 blank ab Seite 194
982 Sechskantmuttern selbstsichernd hohe Form A2 blank ab Seite 195
985 Sechskantmuttern selbstsichernd niedrige Form 8 verz. blau ab Seite 196
A2 blank ab Seite 197
988 Paßscheiben PS Stahl blank ab Seite 198
1052 Scheiben für Holzverbinder HV100 verz. blau ab Seite 200
1440 Scheiben Ausführung mittel für Bolzen HV100 blank ab Seite 201
HV100 verz. blau ab Seite 202
1441 Scheiben Ausführung grob für Bolzen HV100 blank ab Seite 203
HV100 verz. blau ab Seite 204
04 / 2019 V
Norm Bezeichnung Material Oberfläche
1587 Hutmuttern hohe Form Stahl verz. blau ab Seite 205
A2 blank ab Seite 206
1804 Nutmuttern metrisches Feingewinde 5.8 blank ab Seite 207
1816 Kreuzlochmuttern metrisches Feingewinde 5.8 blank ab Seite 208
2093 Tellerfedern Stahl brüniert ab Seite 209
3017 Schlauchschellen Breite 9 mm Stahl verz. blau ab Seite 210
A2 verz. blau ab Seite 211
6325 Zylinderstifte gehärtet, Toleranzfeld m6 gehärtet blank ab Seite 212
6330 Sechskantmuttern 1,5 d hoch Ausführung A 10.9 brüniert ab Seite 214
6330 Sechskantmuttern 1,5 d hoch Ausführung B 5.8 blank ab Seite 215
6331 Sechskantmuttern 1,5 d hoch mit Bund 10.9 brüniert ab Seite 216
10.9 verz. blau ab Seite 217
6334 Sechskantmuttern 3 d hoch Stahl verz. blau ab Seite 218
6340 Scheiben, gehärtet gehärtet brüniert ab Seite 219
gehärtet verz. blau ab Seite 220
6796 Spannscheiben für Schraubverbindungen Stahl brüniert ab Seite 221
Stahl verz. blau ab Seite 222
6797 A Zahnscheiben außenverzahnt Stahl brüniert ab Seite 223
Stahl verz. blau ab Seite 224
A2 blank ab Seite 225
6797 I Zahnscheiben innenverzahnt Stahl brüniert ab Seite 226
Stahl verz. blau ab Seite 227
A2 blank ab Seite 228
6798 A Fächerscheiben Form A Stahl brüniert ab Seite 229
Stahl verz. blau ab Seite 230
A2 blank ab Seite 231
6798 I Fächerscheiben Form I Stahl brüniert ab Seite 232
Stahl verz. blau ab Seite 233
A2 blank ab Seite 234
6799 Sicherungsscheiben für Wellen Stahl brüniert ab Seite 235
Stahl verz. blau ab Seite 236
A2 blank ab Seite 237
VI 04 / 2019
Norm Bezeichnung Material Oberfläche
6885 Paßfedern Form A Stahl blank ab Seite 238
6912 Zylinderschrauben mit Innensechskant und niedrigem 8.8 brüniert ab Seite 240
8.8 verz. blau ab Seite 242
A2 blank ab Seite 243
6921 Sechskantschrauben mit Flansch A2 blank ab Seite 244
6923 Flachbundmutter 8 verz. blau ab Seite 245
6923 Flachbundmutter mit Sperrzähnen 8 verz. blau ab Seite 246
A2 blank ab Seite 247
6925 Sechskantmuttern mit Klemmteil 8 verz. blau ab Seite 248
7337 Blindniete Flachkopf Alu/Stahl Alu verz. blau ab Seite 249
7349 Scheiben für Schrauben mit schweren Spannhülsen HV100 verz. blau ab Seite 251
A2 blank ab Seite 252
7500 CE Gewindefurchende Schrauben mit Linsenkopf und PZD
gehärtet verz. blau ab Seite 253
7500 PE Gewindefurchende Schrauben mit Linsenkopf und TX gehärtet verz. blau ab Seite 254
7500 DE Gewindefurchende Schrauben mit Sechskantkopf gehärtet verz. blau ab Seite 255
7500 ME Gewindefurchende Schrauben mit Senkkopf und PZD gehärtet verz. blau ab Seite 256
7500 EE Gewindefurchende Schrauben mit Zyl-Kopf und I-6Kt gehärtet verz. blau ab Seite 257
7504 MH Bohrschrauben Linsenkopf Kreuzschlitz gehärtet verz. blau ab Seite 258
7504 MT Bohrschrauben Linsenkopf mit TX gehärtet verz. blau ab Seite 259
7504 K Bohrschrauben Sechskantkopf mit Bund gehärtet verz. blau ab Seite 260
7504 OH Bohrschrauben Senkkopf Kreuzschlitz gehärtet verz. blau ab Seite 261
04 / 2019 VII
Norm Bezeichnung Material Oberfläche
7504 OT Bohrschrauben Senkkopf mit TX gehärtet verz. blau ab Seite 262
7967 Sicherungsmuttern Stahl verz. blau ab Seite 263
Stahl tzn ab Seite 264
7976 C Sechskant-Blechschrauben Stahl verz. blau ab Seite 265
A2 blank ab Seite 266
7977 Kegelstifte mit Gewindezapfen und konstanten Zapfe 5.8 blank ab Seite 267
7978 A Kegelstifte mit Innengewinde 5.8 blank ab Seite 268
7979 D Zylinderstifte mit Innengewinde gehärtet Tol. m6 gehärtet blank ab Seite 269
7980 Federringe für Zylinderschrauben Stahl brüniert ab Seite 270
Stahl verz. blau ab Seite 271
A2 blank ab Seite 272
7981 C Linsen-Blechschrauben mit PH-Kreuzschlitz Stahl verz. blau ab Seite 273
A2 blank ab Seite 274
7981 C Linsen-Blechschrauben mit TX Stahl verz. blau ab Seite 275
A2 blank ab Seite 276
7982 C Senk-Blechschrauben mit PH-Kreuzschlitz CH Stahl verz. blau ab Seite 277
A2 blank ab Seite 278
7982 C Senk-Blechschrauben mit TX CT Stahl verz. blau ab Seite 279
A2 blank ab Seite 280
7983 C Linsensenk-Blechschrauben mit PH-Kreuzschlitz CH Stahl verz. blau ab Seite 281
A2 blank ab Seite 282
7984 Zylinderschrauben mit Innensechskant und niedrigem Kopf
8.8 brüniert ab Seite 283
8.8 verz. blau ab Seite 285
A2 blank ab Seite 286
7985 Linsenschrauben mit PH-Kreuzschlitz 4.8 verz. blau ab Seite 287
A2 blank ab Seite 288
7989 Scheiben für Stahlkonstruktionen Stahl verz. blau ab Seite 289
Stahl tzn ab Seite 290
7990 Sechskantschrauben mit Sechskantmuttern für Stahlk 4.8 tzn ab Seite 291
8140 Re-Coil Gewindeeinsatz Edelstahl A2 blank ab Seite 292
VIII 04 / 2019
Norm Bezeichnung Material Oberfläche
8140 Re-Coil Reparatursatz Stahl blank ab Seite 293
9021 Scheiben HV140 verz. blau ab Seite 294
A2 blank ab Seite 295
Muffe Verbindungsmuttern (Distanzmuttern), rund Stahl verz. blau ab Seite 296
Muffe Verbindungsmuttern (Distanzmuttern), Sechskant Stahl verz. blau ab Seite 297
14399 Scheiben rund für HV-Verbindungen in Stahlkonstruktionen 14399-06
HV300 tzn ab Seite 298
14399 Sechskantmuttern mit großen Schlüsselweiten für HV Verbindungen 14399-04
10.9 tzn ab Seite 299
14399 Sechskantschrauben mit großen Schlüsselweiten für HV Verbindungen 14399-04
10.9 tzn ab Seite 300
2338 Zylinderstifte Toleranzfeld h8 Stahl blank ab Seite 301
2338 Zylinderstifte Toleranzfeld m6 Stahl blank ab Seite 302
A1 blank ab Seite 304
4026 Gewindestifte mit Innensechskant und Kegelkuppe 45H brüniert ab Seite 305
45H verz. blau ab Seite 307
A2 blank ab Seite 309
4027 Gewindestifte mit Innensechskant und Spitze 45H brüniert ab Seite 310
45H verz. blau ab Seite 311
A2 blank ab Seite 312
4028 Gewindestifte mit Innensechskant und Zapfen 45H brüniert ab Seite 313
45H verz. blau ab Seite 314
A2 blank ab Seite 315
4029 Gewindestifte mit Innensechskant und Ringschneide 45H brüniert ab Seite 316
45H verz. blau ab Seite 318
A2 blank ab Seite 319
4032 Sechskantmuttern 5.2 blank ab Seite 320
5.2 verz. blau ab Seite 321
4762 Zylinderschrauben mit Innensechskant 8.8 brüniert ab Seite 322
8.8 verz. blau ab Seite 325
10.9 brüniert ab Seite 327
10.9 verz. blau ab Seite 330
12.9 brüniert ab Seite 332
12.9 verz. blau ab Seite 335
A2 blank ab Seite 336
7089 Scheiben Form A HV200 blank ab Seite 339
HV200 verz. blau ab Seite 340
HV200 tzn ab Seite 341
04 / 2019 IX
Norm Bezeichnung Material Oberfläche
7380-1 Linsenschrauben mit Innensechskant 10.9 brüniert ab Seite 342
10.9 verz. blau ab Seite 343
A2 blank ab Seite 344
7380-2 Linsen-Flanschkopfschraube mit Innensechskant 10.9 brüniert ab Seite 345
10.9 verz. blau ab Seite 346
A2 blank ab Seite 347
8748 Spiral-Spannstifte schwere Ausführung Stahl brüniert ab Seite 348
8750 Spiral-Spannstifte Regelausführung Stahl brüniert ab Seite 349
8752 Spannstifte (Spannhülsen) schwere Ausführung Stahl brüniert ab Seite 350
A2 blank ab Seite 353
10642 Senkschrauben mit Innensechskant 8.8 brüniert ab Seite 354
8.8 verz. blau ab Seite 355
10.9 brüniert ab Seite 356
10.9 verz. blau ab Seite 358
A2 blank ab Seite 359
13337 Spannstifte (Spannhülsen) leichte Ausführung Stahl brüniert ab Seite 361
14579 Zylinderschrauben mit TX A2 blank ab Seite 362
14580 Zylinderschrauben mit TX und niedrigem Kopf A2 blank ab Seite 364
14581 Senkschrauben mit TX 4.8 verz. blau ab Seite 365
A2 blank ab Seite 366
14583 Linsenschrauben mit TX 4.8 verz. blau ab Seite 367
A2 blank ab Seite 368
14584 Linsensenkschrauben mit TX A2 blank ab Seite 369
4x4 Zentr SDS Hammerbohrer HM SDS-plus ab Seite 370
Schnorr Sicherungsscheiben S Schnorr Stahl brüniert ab Seite 371
Stahl verz. blau ab Seite 372
Stocksch. Stockschrauben mit aufgewalztem Holzgewinde Stahl verz. blau ab Seite 373
X 04 / 2019
zurückgezogene übernommene
DIN DIN-EN-ISO DIN - EN DIN - ISO ISO1 22339 22339
7 2338 22338 2338
84 1207 1207
85 1580 1580
94 1234 1234
125A -1 bis HV250 7089 7089
125A -2 HV300 7089 7089
125B -1 bis HV250 7090 7090
125B -2 HV300 7090 7090
126 7091 7091
258 8737
267 -1 8992
267 -3 20898-1 20898-1 898-1 20898-1
267 -4 20898-2 20898-2 898-2 20898-2
267 -5 3269
267 -7 20898-1 20898-1 898-1 20898-1
267 -9 4042
267 -11 3506-1 bis-3
267 -12 2702 2702 2702
267 -15 2320 2320 2320
267 -15 3506-1 3506-1 3506 3506-1
267 -15 3506-2 3506-2 3506 3506-2
267 -15 3506-3 3506-3 3506 3506-3
267 -18 28839 28839 28839
267 -19 26157-1 26157-1 26157-1
267 -19 26157-3 26157-3 26157-3
267 -20 493
267 -21 493
267 -23 898-6 898-6 898-6 898-6
267 -25 20898-7 20898-7 20898-7
417 27435 7435
427 2342 2342
433 -1 bis HV250 7092 7092
433 -2 HV300 7092 7092
438 27436 7436
439 -1 (FormA) 4036 24036 4036 4036
439 -2 (FormB) 4035 24035 4035
439 -2 - Feingew. 4035 28675 8675 28675
440 7094
508
551 24766 4766
553 27434 27434
555 4034 24034 4034 24034
558 4018 24018 4018 24018
601 4016 24016 4016 24016
603 8677
660 1051
898 -6 898-6
912 4762 4762 4762
913 4026 4026 4026
914 4027 4027 4027
915 4028 4028 4028
916 4029 4029 4029
931 -1 4014 24014 4014 24014
933 4017 24017 4017 24017
934 Regelgew. 4032 24032 4032 4032
934 Feingew. 8673 28673 28673
935
960 8765 28765 8765 8765
961 8676 28676 8676 8676
963 2009 2009 2009
geltende Normen sind fettgedruckt. Stand 2019
zurückgezogene übernommene
DIN DIN-EN-ISO DIN - EN DIN - ISO ISO
geltende Normen sind fettgedruckt. Stand 2019
964 2010 2010 2010
965 7046 7046 7046
966 7047 7047 7047
971 -1 8673 28673 8673
971 -2 8674 28674 8674
980 Regelgew. 7042 27042 7042
980 Feingew. 10513 10513 10513
982 Regelgew. 7040 27040 7040
982 Feingew. 7040 7040 7040
982 Regelgew. 10512 30512 10512
985 10511 10511
1440 28738 28738
1443 22340 22340
1444 22341 22341
1470 8736 28736 8736
1471 8744 28744 8744
1472 8745 28745 8745
1473 8740 28740 8740
1474 8741 28741 8741
1475 8742 28742 8742
1476 8746 28746 8746
1477 8747 28747 8747
1481 8752 28752 8752
6325 8734 28734 8734
6914 14399-04 14399-04
6915 14399-04 14399-04
6916 14399-06 14399-06
6921 1665 1665
6922 1665 1665
6923 1661 1661
6924 Regelgew. 7040 27040 7040
6924 Feingew. 10512 30512 10512
6925 Regelgew. 7042 27042 7042
6925 Feingew. 10513 30513 10513
6926 Regelgew. 1663 1663
6926 Feingew. 1666 1666
6927 Regelgew. 1664 1664
6927 Feingew. 1667 1667
7046 7046-1
7343 8750 28750 8750 8750
7344 8748 28748 8748 8748
7346 13337 13337
7504 -K 15480 15480
7504 -M 15481 15481
7504 -O 15482 15482
7504 -Q 15483 15483
7971 1481 1481
7972 1482 1482
7973 1483 1483
7976 1479 1479
7977 28737 28737
7978 28736 28736
7979 8733 28733 8733
7979 8735 28735 8735
7981 7049 7049
7982 7050 7050
7983 7051 7051
7985 7045 7045
7991 10642 10642
8674 287649021 7093
ISO DIN DIN-EN-ISO DIN - EN DIN - ISO1051 660
1207 84 1207
1234 94 1234
1479 7976 1479
1481 7971 1481
1482 7972 1482
1483 7973 1483
1580 85 1580
1661 6923 1661
1663 6926 Regelgew. 1663
1664 6927 Regelgew. 1664
1665 6921 1665
1665 6922 1665
1666 6926 Feingew. 1666
1667 6927 Feingew. 1667
2009 963 2009 2009
2010 964 2010 2010
2320 267 -15 2320 2320
2338 7 2338 22338
2342 427 2342
2702 267 -12 2702 2702
4016 601
4018 558
4026 913 4026 4026
4027 914 4027 4027
4028 915 4028 4028
4029 916 4029 4029
4032 934 Regelgew. 4032 24032 4032
4035 439 -2 (FormB) 4035 24035
4036 439 -1 (FormA) 4036 24036 4036
4762 912 4762 4762
7040 982 Regelgew. 7040 27040
7040 982 Feingew. 7040 7040
7040 6924 Regelgew. 7040 27040
7042 980 Regelgew. 7042 27042
7042 6925 Regelgew. 7042 27042
7045 7985 7045
7046 965 7046 7046
7047 966 7047 7047
7049 7981 7049
7050 7982 7050
7051 7983 7051
7089 125A -1 bis HV250 7089
7089 125A -2 HV300 7089
7090 125B -1 bis HV250 7090
7090 125B -2 HV300 7090
7091 126 7091
7092 433 -1 bis HV250 7092
7092 433 -2 HV300 7092
7093 9021
7094 440R
7435 417 27435
geltende Normen sind fettgedruckt. Stand 2019
ISO DIN DIN-EN-ISO DIN - EN DIN - ISO
geltende Normen sind fettgedruckt. Stand 2019
7436 438 27436
8673 971 -1 8673 28673
8674 971 -2 8674 28674
8675 439 fein
8676 961 8676 28676 8676
8677 603
8733 7979 8733 28733
8734 6325 8734 28734
8735 7979 8735 28735
8736 7978 8736 28736
8737 258
8739 1470
8740 1473 8740 28740
8741 1474 8741 28741
8742 1475 8742 28742
8744 1471 8744 28744
8745 1472 8745 28745
8746 1476 8746 28746
8747 1477 8747 28747
8748 7344 8748 28748 8748
8750 7343 8750 28750 8750
8752 1481 8752 28752
8765 960 8765 28765 8765
10511 985 10511
10512 982 Regelgew. 10512 30512
10512 6924 Feingew. 10512 30512
10513 980 Feingew. 10513 10513
10513 6925 Feingew. 10513 30513
10642 7991 10642
13337 7346 13337
15480 7504 -K 15480
15481 7504 -M 15481
15482 7504 -O 15482
15483 7504 -Q 15483
22339 1 22339
22340 1443 22340
22341 1444 22341
24014 931 -1 4014 24014 4014
24016 601 4016 24016 4016
24017 933 4017 24017 4017
24018 558 4018 24018 4018
24034 555 4034 24034 4034
27434 553 27434
28673 934 Feingew. 8673 28673
28675 439 -2 - Feingew. 4035 28675 8675
28736 7978 28736
28737 7977 28737
28738 1440 28738
28839 267 -18 28839 28839
14399-04 6914 14399-04
14399-04 6915 14399-04
14399-06 6916 14399-06
ISO DIN DIN-EN-ISO DIN - EN DIN - ISO
geltende Normen sind fettgedruckt. Stand 2019
20898-1 267 -3 20898-1 20898-1 898-1
20898-1 267 -7 20898-1 20898-1 898-1
20898-2 267 -4 20898-2 20898-2 898-2
20898-7 267 -25 20898-7 20898-7
26157-1 267 -19 26157-1 26157-1
26157-3 267 -19 26157-3 26157-3
3506-1 267 -15 3506-1 3506-1 3506
3506-2 267 -15 3506-2 3506-2 3506
3506-3 267 -15 3506-3 3506-3 3506
898-6 267 -23 898-6 898-6 898-6
267 -1 8992
267 -5 3269
267 -9 4042
267 -11 3506-1 bis-3
267 -20 493
267 -21 493
508
551 24766 4766
898 -6 898-6
935
7046 7046-1
8674 287649021 7093
Edelstahl: Werkstoffe, Eigenschaften, Festigkeitsklassen
Edelstahl (nach DIN EN 10020) ist eine Bezeichnung für legierte oder unlegierte Stähle, deren Schwefel- und Phosphorgehalt 0,025 % nicht übersteigt.
Edelstahl: darf auch mal rosten!
Dass ein Edelstahl �chemisch besonders rein� oder �nichtrostend� sein muss, ist nicht zutreffend: nicht zwangsläufig muss er den Anforderungen eines nichtrostenden Stahls entsprechen. Trotzdem werden im Alltag häufig nur rostfreie Stähle als Edelstähle bezeichnet. Ebenso muss ein rostfreier Stahl nicht unbedingt auch ein Edelstahl sein. Zu den Edelstählen zählen z.B. Stähle, bei denen durch einen besonderen Herstellungsprozess Aluminium und Sizilium aus der Schmelze ausgeschieden werden oder z.B. auch hochlegierte Werkzeugstähle, die für eine spätere Wärmebehandlung vorgesehen sind. Marktüblich versteht man unter Edelstahl üblicherweise die Gruppe der nichtrostenden Edelstähle, auch bezeichnet als �Edelstahl Rostfrei� oder nur �Rostfrei�. Ebenso sind Bezeichnungen wie Nirosta, Remanit, Chromargan oder V2A/V4A anzutreffen.
Relevant für die Verbindungselemente
Für den Bereich der Verbindungselemente werden die Eigenschaften der nichtrostenden Stahlsorten in der Normreihe ISO 3506-1-3 beschrieben und in drei wesentliche Stahlgruppen unterteilt. Jeder Stahlgruppe werden die Stahlsorten, zahlreiche Werkstoffe und Fertigkeitsklassen zugeordnet. Nachstehend finden Sie die Übersicht über das Bezeichnungssystem.
Eine variantenreiche Familie
Austenitische Stähle
Als Austenit, benannt nach Sir William Chandler Roberts-Austen, werden �-Mischkristalle des Eisens bezeichnet. Die austenitischen Stähle (A1 � A5) sind � abhängig von den Umgebungsbedingungen � sehr korrosionsbeständig. Um die Neigung zur Kaltverfestigung zu verringern und eine bessere Umformbarkeit zu erzielen, kann diesen Werkstoffen Kupfer beigefügt werden.
Diese Werkstoffe können nicht gehärtet werden und sind in der Regel nicht magnetisierbar (=> Permeabilität). Den Stahlsorten A 3 und A 5 werden die Elemente Titan, Niob oder Tantal zugefügt, um bei hohen Temperaturen oder zum Beispiel nach dem Schweißen eine höhere Stabilität gegen interkristalline Korrosion zu erreichen.
Martensitische Stähle
Als Martensit oder martensitisch (benannt nach dem deutschen Werkstoffkundler A. v. Martens, 1850 � 1914) bezeichnet man eine kristalline Struktur im Stahlgefüge. Sie entsteht, wenn die Abkühlung nach dem Härten sehr schnell erfolgt. Bei der technischen Wärmebehandlung von Stählen kommt der martensitischen Umwandlung wohl die größte Bedeutung zu, weil von Ausnahmen in der Praxis abgesehen, alle Härte- und Vergütungsbehandlungen über eine Martensitbildung
ablaufen. Gegenüber den austenitischen Werkstoffen können martensitische Werkstoffe gehärtet werden. Martensite kommen den mechanischen Eigenschaften von Stahl näher. Die Korrosionsbeständigkeit ist allerdings gegenüber den Austeniten geringer.
Ferritische Stähle
Als Ferrit oder ferritisch bezeichnet man eine kristalline Struktur im Stahlgefüge. Ferritische Stähle sind warmfeste Stähle mit besonderen magnetischen Eigenschaften, welche nicht abschreckhärtbar sind. Sie neigen zur Bildung von grobem Korn, welches nicht zu beseitigen ist. Sie weisen üblicherweise eine deutliche Härte und Sprödigkeit auf. Eine Zuordnung von Werkstoffen zu den einzelnen Stahlsorten sowie deren Eigenschaften sind der folgenden Tabelle zu entnehmen:
Permeabilität
Die magnetische Permeablität �� bestimmt die Durchlässigkeit von Materie für magnetische Felder. Permeabilität ist das Verhältnis der magnetischen Flussdichte B zur magnetischen Feldstärke H. Der Werkstoff hat eine geringe magnetische Permeabilität, wenn der Wert für �� nahe 1 liegt.
Für Verbindungselemente aus Edelstahl ist diese Eigenschaft in den Teilen der ISO 3506 in informativen Anhängen beschrieben. Verbindungselemente aus austenitischen Stählen sind im Allgemeinen nicht magnetisierbar. Nach der Kaltumformung kann eine gewisse Magnetisierbarkeit vorliegen. Auch durch Spanabhub bei gedrehten Ausführungen oder durch Stanzen kann Magnetismus auftreten. So weist A 2 ein �� � 1,8 auf, ein A 4 ein �� � 1,015.
In besonderen Anwendungsfällen können zu hohe Werte durch eine spezielle Wärmebehandlung von erfahrenen Betrieben reduziert werden. Dabei können aber auch die mechanischen Eigenschaften beeinträchtigt werden.
Kaltverschweißung/Fressen
Bei Verbindung zweier Elemente aus nichtrostenden Stählen sind die Reibungswerte im Gewinde und an den Auflageflächen größer als bei den vergüteten Schrauben. Es wird angenommen, dass bei der Verschraubung zu Verschweißungen im mikroskopischen Bereich kommt. Durch weiteres Anziehen des Verbindungselements werden die Verschweißungen wieder aufgerissen. Dadurch erhöht sich die Oberflächenrauheit und erschwert weiteres Drehen der Schrauben oder Mutter. Dies wiederholt sich so oft, bis sich das Verbindungselement nicht mehr drehen lässt. Die Gefahr der Kaltverschweißung kann durch Verwendung von Kupferpaste oder ähnlichen Schmierstoffen vermindert werden. Eine ebenfalls in der Praxis erprobte, aber technisch nicht nachweisbare Variante, ist die Verwendung von beispielsweise A 2-Schrauben mit A 4-Muttern.
Härten von austenitischen Werkstoffen (Kolsterisieren)
Eine Möglichkeit zur Erhöhung der Oberflächenhärte, z. B. als Verschleißschutz bildet das Kolsterisieren. Hierbei werden mittels eines Diffusionsverfahren bei niedriger Temperatur (<300°C) größere Mengen Kohlenstoff eindi ffuniert. Der Kohlenstoff wird in Zwischengitterplätzen gelöst und bildet keine Carbide. Aufgrund der großen Mengen Kohlenstoff kommt es zu Druckspannungen in der Oberfläche, die eine sehr hohe Oberflächenhärte von > 1000 HV 0,05 erzeugen. Die Standardbehandlung als Verschleißschutz ergibt eine Einhärttiefe von 22 �m, für austenitischen, rostfreien Stahl.
Kritisch: Federnde Eigenschaften mitverspannter Elemente
Da austenitische Werkstoffe nicht vergütet werden können, erreichen sie nicht die gleichen mechanischen Eigenschaften wie Federstahl (hohe Härte). Die von Federstahl gewohnten Eigenschaften sind fast nicht vorhanden. Spannschieben aus A 2 (1.4301) werden z. B. bei der Montage �platt� gedrückt. Nach dem Lösen bleiben die Spannscheiben in diesem �platten� Zustand, was den Rückschluss zulässt, dass eine Federwirkung nahezu nicht vorhanden ist. Die Normung trägt diesen Sachverhalt Rechnung, indem alle mitverspannten, federnden Elemente aus dem Werkstoff �Nichtrostender Stahl� nicht genormt sind. Dennoch werden diese in der Praxis oft verlangt. Als einzige Alternative für derartige Anwendungen kommt der austenitische Werkstoff 1.4301 (X10CrNi18-8) in Betracht. Dieser kann zwar nicht dieselben Eigenschaften wie Federstahl aufweisen, erreicht aber zumindest, wenn auch reduzierte, nachweisbare Federkräfte. Für den Anwender ist dies oft nur durch ein genaues Studium der Artikeltexte erkennbar. Mitverspannte, federnde Elemente, die in ihrer Bezeichnung nur den Hinweis A 2 oder A 4 enthalten und oftmals preisgünstig angeboten werden, sollten aufgrund nicht vorhandener Federkräfte keine Verwendung in modernen Konstruktionen finden.
Festigkeitsklassen
Da austenitische Werkstoffe nicht über eine Wärmebehandlung gehärtet oder vergütet werden können, weisen sie im unbearbeiteten Lieferzustand die Festigkeitsklasse 50 auf, was eine Zugfestigkeit von ca. 500 MPa entspricht. Bei einer spanlosen Herstellung werden sie kaltverfestigt, wodurch die Zugfestigkeiten auf bis zu 700 MPa bzw. 800 MPa (Festigkeitsklasse 70 + 80) ansteigen können.
Da der Verfestigungsdruck z.B. beim Gewindewalzen Grenzen unterliegt, kann die in der Praxis übliche Festigkeitsklasse 70 maximal bei Schrauben bis zur Größe von M 24 erreicht werden. Anders als bei Stahlschrauben besteht zwischen der 0,2%-Dehngrenze und der Zugfestigkeit kein linearer Zusammenhang. Die zur entsprechenden Zugfestigkeit 50, 70, 80 gehörende Dehngrenze ist umseitiger Tabelle zu entnehmen.
Stahlgruppe Stahlsorte Festigkeits-klasse
Durchmesser-bereich
ZugfestigkeitRm / MPa min.
0,2%-Dehngrenze Rp 0,2 / MPa min.
Bruch-Dehnung A² mm min.
Austenitisch A1, A2, A3, A4, A5
50 70 80
� M 39 � M 24 � M 24
500 700 800
210 450 600
0,6 d 0,4 d 0,3 d
Martensitisch C 1
C 3 C 4
50 70 110 80 50 70
500 700 1100 800 500 700
250 410 820 640 250 410
0,2 d 0,2 d 0,2 d 0,2 d 0,2 d 0,2 d
Ferritisch F 1 45 60
450 600
250 410
0,2 d 0,2 d
Die mechanischen und chemischen Eigenschaften für Nichtrostende Verbindungs-elemente sind in der DIN EN ISO 3506-1/2 und -3 festgelegt.
Hohe Reibungswerte beim Verschrauben
Neben den anderen Festigkeitsklassen haben Verbindungselemente aus austenitischen Werkstoffen auch ein anderen Reibungsverhalten im Gewinde, so dass andere Montageverhalten und Anziehdrehmomente angewendet werden müssen als bei vergüteten Stahlschrauben.
Bei Verbindungselementen aus nichtrostenden Stählen sind die Reibungswerte im Gewinde und an den Auflageflächen wesentlich größer als bei vergüteten Stahlschrauben. Auch der Streubereich der Reibungswerte ist hier viel größer (bis über 100%).
Durch die Verwendung von Schmiermitteln (z. B. Kupferpaste oder Überzüge wie Delta Seal GZ) können die Reibungszahlen gezielt verändert werden. Zur endgültigen Bestimmung des richtigen Drehmomentes ist ein Versuch unter Einsatzbedingungen angeraten.
Abstandsbolzen A mit Innen/Außengewinde
BC (kurze Abmess
M 256
M 2,567
M 367
M 489
M 51011
M 61214
M 81416
verz. blauAM
künftig ISO / EN
Stahl-
Abmessung VPE Preis €
2 x 10 SW 4 500 13,002 x 14 SW 4 500 14,402,5 x 6 SW 5 500 12,403 x 5 SW 5,5 500 12,403 x 6 SW 5,5 500 12,803 x 8 SW 5,5 500 13,003 x 8 SW 6 500 13,403 x 10 SW 5,5 500 13,303 x 10 SW 6 500 13,803 x 11 SW 5,5 500 13,803 x 12 SW 5,5 500 14,303 x 12 SW 6 500 15,003 x 14 SW 5,5 500 14,703 x 15 SW 5,5 500 15,103 x 15 SW 6 500 16,203 x 16 SW 5,5 500 15,303 x 17 SW 5,5 500 15,503 x 18 SW 5,5 500 16,203 x 20 SW 5,5 500 16,503 x 20 SW 6 500 16,803 x 25 SW 5,5 500 16,703 x 25 SW 6 500 17,403 x 30 SW 5,5 500 18,303 x 30 SW 6 500 18,903 x 35 SW 5,5 500 18,903 x 35 SW 6 500 19,603 x 40 SW 5,5 500 20,203 x 40 SW 6 500 20,903 x 45 SW 6 500 26,503 x 50 SW 5,5 500 26,103 x 50 SW 6 500 28,203 x 60 SW 5,5 500 31,404 x 8 SW 7 500 16,304 x 8 SW 8 500 19,504 x 10 SW 7 500 16,804 x 10 SW 8 500 20,104 x 12 SW 7 500 17,704 x 12 SW 8 500 21,704 x 15 SW 7 500 18,904 x 15 SW 8 500 22,404 x 16 SW 7 500 19,60
Abmessung VPE Preis €
4 x 18 SW 7 500 21,104 x 18 SW 8 500 25,104 x 20 SW 7 500 21,904 x 20 SW 8 500 26,204 x 22 SW 7 500 22,804 x 25 SW 7 500 23,104 x 25 SW 8 500 29,404 x 30 SW 7 500 24,404 x 30 SW 8 500 31,004 x 35 SW 7 500 26,104 x 35 SW 8 500 32,204 x 40 SW 7 500 27,804 x 40 SW 8 500 39,604 x 45 SW 7 500 31,104 x 45 SW 8 200 41,804 x 50 SW 7 200 32,104 x 50 SW 8 200 43,504 x 55 SW 7 200 36,104 x 60 SW 7 200 37,704 x 60 SW 8 200 47,604 x 65 SW 7 200 40,904 x 80 SW 7 200 51,405 x 10 SW 8 500 22,705 x 12 SW 8 500 23,905 x 18 SW 8 500 25,305 x 20 SW 10 200 38,805 x 20 SW 8 500 27,705 x 25 SW 8 500 30,805 x 30 SW 10 500 47,005 x 30 SW 8 500 33,905 x 35 SW 8 500 39,705 x 40 SW 10 200 55,105 x 40 SW 8 200 40,005 x 45 SW 10 200 58,905 x 45 SW 8 200 42,005 x 50 SW 10 200 68,505 x 50 SW 8 200 44,105 x 60 SW 8 200 51,405 x 80 SW 8 200 66,005 x 100 SW 8 100 87,906 x 15 SW 10 500 45,50
Abmessung VPE Preis €
6 x 18 SW 10 500 46,506 x 20 SW 10 200 47,706 x 25 SW 10 200 49,306 x 30 SW 10 200 52,106 x 35 SW 10 200 57,106 x 40 SW 10 200 59,206 x 45 SW 10 200 62,606 x 50 SW 10 200 65,606 x 55 SW 10 200 68,806 x 60 SW 10 200 71,606 x 70 SW 10 100 81,306 x 80 SW 10 100 90,506 x 100 SW 10 100 114,808 x 15 SW 13 100 56,808 x 25 SW 13 100 64,408 x 30 SW 13 100 68,508 x 40 SW 13 100 77,008 x 70 SW 13 100 105,608 x 100 SW 13 100 131,00
Preise per 100 Stück
04 / 2019 Seite 1
Abstandsbolzen A mit Innen/Außengewinde
BC (kurze Abmess
M 256
M 2,566
M 367
M 489
M 51011
vernickeltAM
künftig ISO / EN
Messing-
Abmessung VPE Preis €
2 x 5 SW 4 500 12,702 x 10 SW 4 500 14,502 x 12 SW 4 500 15,402,5 x 5 SW 4 500 12,702,5 x 5 SW 5 500 10,002,5 x 6 SW 4 500 13,102,5 x 6 SW 5 500 10,302,5 x 8 SW 4 500 13,902,5 x 8 SW 5 500 10,802,5 x 9 SW 5 500 11,002,5 x 10 SW 5 500 11,202,5 x 11 SW 4 500 15,002,5 x 12 SW 5 500 12,402,5 x 20 SW 4 500 18,902,5 x 25 SW 5 500 18,503 x 5 SW 5 500 10,803 x 5 SW 5,5 500 11,103 x 6 SW 5 500 11,103 x 6 SW 5,5 500 11,703 x 6 SW 5 500 11,603 x 7 SW 5 500 11,603 x 8 SW 5 500 12,003 x 8 SW 5,5 500 12,203 x 9 SW 5 500 12,303 x 10 SW 5 500 12,803 x 10 SW 5,5 500 13,103 x 12 SW 5 500 13,603 x 12 SW 5,5 500 13,903 x 14 SW 5,5 500 14,903 x 15 SW 5 500 15,003 x 15 SW 5,5 500 15,203 x 17 SW 5 500 15,803 x 18 SW 5,5 500 16,503 x 19 SW 5 500 16,503 x 20 SW 5 500 16,803 x 20 SW 5,5 500 17,503 x 25 SW 5 500 19,403 x 25 SW 5,5 500 21,103 x 30 SW 5 500 21,303 x 30 SW 5,5 500 23,503 x 32 SW 5,5 500 32,25
Abmessung VPE Preis €
3 x 35 SW 5 500 23,103 x 35 SW 5,5 500 25,003 x 40 SW 5 500 24,903 x 40 SW 5,5 500 28,803 x 50 SW 5,5 500 39,203 x 55 SW 5 500 31,903 x 55 SW 5,5 500 42,203 x 60 SW 5,5 500 44,904 x 5 SW 7 500 15,304 x 8 SW 7 500 16,404 x 10 SW 7 500 17,504 x 12 SW 7 500 18,804 x 15 SW 7 500 20,504 x 20 SW 7 500 24,204 x 22 SW 7 500 27,204 x 25 SW 7 500 29,204 x 30 SW 7 500 34,104 x 35 SW 7 500 38,704 x 40 SW 7 500 43,304 x 50 SW 7 200 52,604 x 60 SW 7 200 63,104 x 80 SW 7 200 82,304 x 100 SW 7 200 94,605 x 10 SW 8 500 26,105 x 15 SW 8 500 30,105 x 20 SW 8 500 34,905 x 30 SW 8 500 42,605 x 35 SW 8 500 49,906 x 10 SW 10 200 31,856 x 15 SW 10 200 35,656 x 20 SW 10 200 40,00
Seite 2 04 / 2019
Preise per 100 Stück
Abstandsbolzen B mit Innen/Innengewinde
C (kurze AbmessM 2
5M 2,5
6M 3
7M 4
9M 511
M 614
M 816
verz. blauBM
künftig ISO / EN
Stahl-
Abmessung VPE Preis €
2 x 5 SW 4 500 12,503 x 5 SW 5,5 500 11,603 x 5 SW 6 500 12,003 x 6 SW 5,5 500 11,703 x 6 SW 6 500 12,203 x 8 SW 5,5 500 12,003 x 8 SW 6 500 12,503 x 9 SW 5,5 500 12,203 x 9 SW 6 500 13,103 x 10 SW 5,5 500 12,403 x 10 SW 6 500 13,403 x 12 SW 5,5 500 12,803 x 12 SW 6 500 14,003 x 13 SW 5,5 500 13,003 x 13 SW 6 500 14,203 x 14 SW 5,5 500 13,303 x 15 SW 5,5 500 13,403 x 15 SW 6 500 14,403 x 16 SW 5,5 500 13,603 x 16 SW 6 500 14,703 x 17 SW 5,5 500 13,803 x 18 SW 5,5 500 13,903 x 19 SW 5,5 500 14,203 x 20 SW 5,5 500 14,703 x 20 SW 6 500 15,503 x 25 SW 6 500 16,103 x 30 SW 5,5 500 16,703 x 30 SW 6 500 17,403 x 35 SW 5,5 500 18,303 x 35 SW 6 500 18,903 x 40 SW 5,5 500 19,603 x 40 SW 6 500 22,703 x 45 SW 6 500 27,903 x 50 SW 5,5 500 24,303 x 60 SW 6 500 31,804 x 8 SW 7 500 13,604 x 8 SW 8 500 15,504 x 10 SW 7 500 14,304 x 10 SW 8 500 16,504 x 12 SW 7 500 14,704 x 12 SW 8 500 19,40
Abmessung VPE Preis €
4 x 15 SW 7 500 16,104 x 15 SW 8 500 20,804 x 20 SW 7 500 18,904 x 20 SW 8 500 23,204 x 25 SW 7 500 19,604 x 25 SW 8 500 24,604 x 27 SW 8 500 25,404 x 30 SW 7 500 21,104 x 30 SW 8 500 26,204 x 35 SW 7 500 22,604 x 35 SW 8 500 27,904 x 40 SW 7 500 23,804 x 40 SW 8 500 30,004 x 45 SW 7 500 27,104 x 45 SW 8 500 33,104 x 50 SW 7 500 30,004 x 50 SW 8 200 36,104 x 55 SW 7 200 31,104 x 55 SW 8 200 39,404 x 60 SW 7 200 32,504 x 60 SW 8 200 42,704 x 65 SW 8 200 42,254 x 80 SW 8 200 61,804 x 85 SW 8 200 55,155 x 10 SW 8 500 19,505 x 12 SW 8 500 19,905 x 15 SW 8 500 20,805 x 17 SW 8 500 22,005 x 20 SW 8 500 23,105 x 25 SW 8 500 27,305 x 30 SW 8 500 29,605 x 35 SW 8 500 30,605 x 40 SW 8 500 33,105 x 45 SW 8 200 35,805 x 50 SW 8 200 38,105 x 60 SW 8 200 44,106 x 15 SW 10 500 28,206 x 20 SW 10 500 30,806 x 25 SW 10 200 36,506 x 30 SW 10 200 41,706 x 35 SW 10 200 50,50
Abmessung VPE Preis €
6 x 40 SW 10 200 55,606 x 45 SW 10 200 57,406 x 50 SW 10 200 59,206 x 60 SW 10 200 66,606 x 100 SW 10 100 107,808 x 30 SW 13 100 58,90
Preise per 100 Stück
04 / 2019 Seite 3
Abstandsbolzen B mit Innen/Innengewinde
C (kurze AbmessM 2
5M 2,5
6M 3
7M 4
9M 511
vernickeltBM
künftig ISO / EN
Messing-
Abmessung VPE Preis €
2 x 4 SW 4 200 8,702 x 5 SW 4 500 9,102 x 6 SW 4 500 9,402 x 6 SW 6 200 9,352 x 8 SW 4 500 9,902 x 9 SW 4 500 10,202 x 10 SW 4 500 10,502 x 12 SW 4 500 12,102 x 15 SW 4 500 13,302,5 x 5 SW 4 500 9,102,5 x 5 SW 5 500 7,802,5 x 6 SW 4 500 9,402,5 x 6 SW 5 500 7,902,5 x 7 SW 4 500 9,702,5 x 8 SW 5 500 8,802,5 x 10 SW 5 500 9,102,5 x 11 SW 4 500 11,302,5 x 12 SW 4 500 12,102,5 x 12 SW 5 500 10,002,5 x13 SW 4 500 12,702,5 x 14 SW 4 500 13,002,5 x 15 SW 4 500 13,302,5 x 15 SW 5 500 11,002,5 x 18 SW 5 500 12,502,5 x 20 SW 5 500 14,302,5 x 25 SW 5 500 16,202,5 x 30 SW 5 500 18,003 x 5 SW 5 500 7,803 x 5 SW 5,5 500 8,403 x 6 SW 5 500 7,903 x 6 SW 5,5 500 8,903 x 7 SW 5 500 8,303 x 7 SW 5,5 500 9,503 x 8 SW 5 500 8,803 x 8 SW 5,5 500 9,703 x 10 SW 5 500 9,103 x 10 SW 5,5 500 10,503 x 11 SW 5 500 11,003 x 12 SW 5 500 10,003 x 12 SW 5/5 500 11,603 x 13 SW 5 500 10,50
Abmessung VPE Preis €
3 x 13 SW 5,5 500 11,803 x 14 SW 5 500 10,703 x 14 SW 5,5 500 12,203 x 15 SW 5 500 11,003 x 15 SW 5,5 500 12,803 x 18 SW 5,5 500 13,803 x 20 SW 5 500 14,303 x 20 SW 5,5 500 15,303 x 21 SW 5,5 500 16,303 x 25 SW 5 500 16,203 x 25 SW 5,5 500 18,503 x 30 SW 5 500 18,003 x 30 SW 5,5 500 20,703 x 35 SW 5 500 19,703 x 35 SW 5,5 500 24,203 x 40 SW 5 500 24,203 x 40 SW 5,5 500 27,403 x 55 SW 5,5 500 34,303 x 60 SW 5,5 200 37,304 x 8 SW 7 500 11,004 x 10 SW 7 500 12,004 x 12 SW 7 500 13,604 x 15 SW 7 500 16,604 x 20 SW 7 500 19,404 x 25 SW 7 500 24,204 x 30 SW 7 500 30,404 x 35 SW 7 500 35,204 x 40 SW 7 500 39,804 x 45 SW 7 500 43,804 x 50 SW 7 500 48,404 x 60 SW 7 200 58,504 x 70 SW 7 200 65,304 x 80 SW 7 200 76,605 x 10 SW 7 500 23,10
Seite 4 04 / 2019
Preise per 100 Stück
Fassadenbauschrauben Typ A A2 mit 16mm Dichtsch.
Self tapping screws with mounted washers - facade
NennSW
6,53/8"
blankFBS
künftig ISO / EN
A2
Vis de façades avec tete hexagonale
-
Abmessung VPE Preis €
6,5 x 19 S 16 100 16,306,5 x 25 S 16 100 18,456,5 x 32 S 16 100 21,556,5 x 38 S 16 100 25,456,5 x 45 S 16 100 26,756,5 x 50 S 16 100 28,106,5 x 64 S 16 100 36,356,5 x 75 S 16 100 40,906,5 x 90 S 16 100 44,556,5 x 100 S 16 100 51,156,5 x 115 S 16 100 57,606,5 x 130 S 16 100 64,25
Preise per 100 Stück
04 / 2019 Seite 5
Fassadenbauschrauben Typ BZ A2 mit 16mm Dichtsch.
Self tapping screws with mounted washers - facade
NennSW
6,33/8"
blankFBS
künftig ISO / EN
A2
Vis de façades avec tete hexagonale
-
Abmessung VPE Preis €
6,3 x 16 S 16 100 16,006,3 x 19 S 16 100 16,306,3 x 25 S 16 100 18,456,3 x 25 S 19 100 20,456,3 x 32 S 16 100 21,556,3 x 32 S 19 100 23,556,3 x 38 S 16 100 25,456,3 x 45 S 16 100 26,756,3 x 50 S 16 100 28,106,3 x 50 S 19 100 30,106,3 x 64 S 16 100 36,356,3 x 70 S 16 100 39,056,3 x 75 S 16 100 40,906,3 x 90 S 16 100 47,906,3 x 100 S 16 100 51,156,3 x 115 S 16 100 57,606,3 x 130 S 16 100 64,256,3 x 150 S 16 100 74,15
Seite 6 04 / 2019
Preise per 100 Stück
Schnellbauschrauben mit Grobgewinde, Trompetenkopf
Quick-building screws with rough thread, trumpet s
d 3,5 3,9 4,2
phosphatiertSBS
künftig ISO / EN
10.9
Vis de charpente, tête évasée, hélice grossière
-
Abmessung VPE Preis €
3,5 x 25 Bohrsp, 1000 3,453,5 x 25 fein 1000 2,453,5 x 35 Bohrsp, 1000 4,003,5 x 35 fein 1000 2,953,5 x 45 Bohrsp, 1000 4,703,5 x 45 fein 1000 4,103,5 x 55 fein 500 4,853,9 x 25 grob 1000 3,203,9 x 25 Bohrsp, 1000 3,453,9 x 25 fein 1000 2,453,9 x 30 fein 1000 2,953,9 x 35 grob 1000 3,603,9 x 35 Bohrsp, 1000 4,003,9 x 35 fein 1000 2,953,9 x 45 grob 1000 4,753,9 x 45 Bohrsp, 1000 5,303,9 x 55 Bohrsp, 500 6,404,2 x 75 grob 500 8,104,2 x 75 fein 500 8,10
Preise per 100 Stück
04 / 2019 Seite 7
Spenglerschrauben mit Dichtscheibe 15 mm mit TX
Wood screws with fealing washer
d 4,5
blankSPS
künftig ISO / EN
A2
Vis à bois à tete cruciforme et baque d'echanteite
-
Abmessung VPE Preis €
4,5 x 20 S15 TX 200 10,804,5 x 25 S15 TX 200 10,004,5 x 35 S15 TX 200 10,204,5 x 45 S15 TX 200 11,254,5 x 50 S15 TX 200 13,054,5 x 60 S15 TX 200 15,304,5 x 65 S15 TX 200 21,604,5 x 80 S15 TX 200 24,004,5 x 100 S15 TX 100 25,804,5 x 120 S15 TX 100 33,00
Seite 8 04 / 2019
Preise per 100 Stück
Kotflügelscheiben, vz
Mudguard washers
d1 x d2sfür Schrauben
4x151,25M 4
4x201,25M 4
5x201,25M 5
5x251,25M 5
5x301,25M 5
6x201,25M 6
6x251,25M 6
6x301,25M 6
8x201,25M 8
8x251,25M 8
8x301,25M 8
10x201,25
M 10
10x251,25M 10
10x301,25
M 10
10x351,25M 10
verz. blauA9022
künftig ISO / EN
HV100
Rondelles pour carrosserie
-
Abmessung VPE Preis €
14 x 4,3 1000 3,4015 x 4,3 1000 3,4016 x 4,3 1000 3,4020 x 3,2 1000 3,5020 x 4,3 1000 3,5020 x 5,3 1000 3,5020 x 6,4 1000 3,5020 x 8,4 1000 3,5025 x 4,3 1000 4,9025 x 5,3 1000 4,9025 x 6,4 200 4,9025 x 8,4 200 4,9025 x 10,5 200 4,9030 x 5 200 7,4030 x 6,4 200 7,4030 x 7,4 200 7,4030 x 8,4 200 7,3030 x 10,5 200 7,3035 x 6,4 200 9,6535 x 8,4 200 9,6535 x 10,5 200 9,6535 x 12,5 200 9,6540 x 8,4 100 13,9540 x 10,5 100 13,9540 x 13 100 13,95
Preise per 100 Stück
04 / 2019 Seite 9
Kotflügelscheiben A2
Mudguard washers
d1 x d2sfür Schrauben
4x151,25M 4
4x201,25M 4
5x201,25M 5
5x251,25M 5
5x301,25M 5
6x201,25M 6
6x251,25M 6
6x301,25M 6
8x201,25M 8
8x251,25M 8
8x301,25M 8
10x201,25
M 10
10x251,25M 10
10x301,25
M 10
10x351,25M 10
blankA9022
künftig ISO / EN
A2
Rondelles pour carrosserie
-
Abmessung VPE Preis €
20 x 4,3 500 9,0020 x 5,3 500 9,0020 x 6,4 500 9,0020 x 8,4 500 9,0025 x 5,3 200 10,0525 x 6,4 200 10,0525 x 8,4 200 10,0530 x 5,3 200 17,3030 x 6,4 200 17,3030 x 8,4 200 17,3035 x 8,4 200 26,4535 x 10,5 200 26,45
Seite 10 04 / 2019
Preise per 100 Stück
Scheiben mit Neoprendichtung
Washers
d1d2sfür Schrauben
2,25
0,3M 2
2,76
0,5M 2,5
3,27
0,5M 3
4,39
0,8M 4
5,3101
M 5
6,4121,6
M 6
8,4161,6
M 8
10,5202
M 10
13242,5
M 12
15282,5
M 14
17303
M 16
19343
M 18
21373
M 20
23393
M 22
25444
M 24
blankA9055
künftig ISO / EN
A2
Rondelles
-
Abmessung VPE Preis €
5,2-S16 1000 8,105,5-S19 1000 12,506,7-S16 1000 8,106,7-S19 1000 12,506,7-S20 1000 12,506,7-S22 1000 21,706,7-S25 1000 21,708,5-S17 1000 8,108,4-S19 1000 12,508,5-S22 1000 21,708,5-S25 1000 21,709-S19 1000 12,5010,5-S25 1000 21,7010-S19 1000 12,50
Preise per 100 Stück
04 / 2019 Seite 11
Heco-Span Senkkopf mit Zahngeometrie und TX, vz
Topix
Gewinde ø dKopf ø dkk -I-Stern Klinge
3,06
1,5T 10
3,57
1,75T 10
4,082
T 20
4,59
2,25T 25
5,0102,5
T 25
6,0123
T 25
verz. blauHECO
künftig ISO / EN
Stahl-
Abmessung VPE Preis €
3,5 x 45 500 8,805 x 45 200 11,106 x 60 200 20,156 x 70/70 200 24,806 x 70 200 24,806 x 80 100 27,556 x 90 100 31,456 x 100 100 37,406 x 110 100 40,556 x 120 100 42,656 x 140 100 63,206 x 150 100 71,356 x 160 100 76,206 x 180 100 103,256 x 200 100 115,106 x 220 100 130,306 x 240 100 139,706 x 260 100 148,456 x 280 100 159,106 x 300 100 163,308 x 80 100 47,858 x 100 100 55,108 x 120 100 69,758 x 140 100 87,608 x 160 100 92,358 x 180 100 125,708 x 200 100 145,458 x 220 50 175,108 x 240 50 209,208 x 260 50 229,708 x 280 50 238,858 x 300 50 250,958 x 320 50 265,858 x 340 50 278,908 x 360 50 293,708 x 380 50 308,158 x 400 50 320,6510 x 80 50 80,6010 x 100 50 96,1510 x 120 50 115,2510 x 140 50 135,60
Abmessung VPE Preis €
10 x 160 50 155,65
Seite 12 04 / 2019
Preise per 100 Stück
Heco-Span Senkkopf mit Zahngeometrie und TX
Fixplus
Gewinde ø dKopf ø dkk -I-Stern Klinge
3,06
1,5T 10
3,57
1,75T 10
4,082
T 20
4,59
2,25T 25
5,0102,5
T 25
6,0123
T 25
verz. blauHECO
künftig ISO / EN
Stahl-
Abmessung VPE Preis €
2,5 x 16/16 1000 2,203,0 x 12/12 1000 2,103,0 x 16/16 1000 2,203,0 x 20/20 1000 2,503,0 x 25/25 1000 2,653,0 x 30/30 1000 3,503,0 x 30 1000 3,503,0 x 35 1000 4,103,0 x 40/40 500 6,103,0 x 40 500 5,503,0 x 45 500 8,953,0 x 45 500 8,053,5 x 12/12 1000 2,903,5 x 16/16 1000 2,903,5 x 20/20 1000 3,103,5 x 25/25 1000 3,203,5 x 25 1000 3,203,5 x 30/30 1000 3,553,5 x 30 1000 3,553,5 x 35/35 1000 4,553,5 x 35 1000 4,553,5 x 40/40 500 5,203,5 x 40 500 5,203,5 x 45 500 8,103,5 x 50/50 500 8,803,5 x 50 500 8,804,0 x 16/16 1000 3,304,0 x 20/20 1000 3,554,0 x 25 1000 4,004,0 x 25 1000 4,004,0 x 30/30 1000 4,204,0 x 30 1000 4,204,0 x 35/35 500 4,904,0 x 35 500 4,904,0 x 40/40 500 5,704,0 x 40 500 5,704,0 x 45 500 6,554,0 x 50 500 7,354,0 x 55 200 12,654,0 x 60 200 12,654,0 x 70 200 20,55
Abmessung VPE Preis €
4,5 x 20/20 1000 4,904,5 x 25/25 500 5,554,5 x 30/30 500 5,854,5 x 30 500 5,854,5 x 35 500 6,454,5 x 35 500 6,454,5 x 40 500 6,954,5 x 40 500 6,954,5 x 45/45 500 8,954,5 x 45 500 8,954,5 x 50 200 9,404,5 x 55/55 200 12,104,5 x 55 200 12,104,5 x 60/60 200 12,104,5 x 60 200 12,104,5 x 70/70 200 20,554,5 x 70 200 20,554,5 x 80 200 22,905 x 20/20 500 6,805 x 25/25 500 6,855 x 30/30 500 7,555 x 30 500 7,555 x 35/35 500 8,655 x 35 500 8,655 x 40 500 9,054 x 50/50 200 10,655 x 50 200 10,655 x 55 200 12,405 x 60/60 200 12,905 x 60 200 12,905 x 70/70 200 18,455 x 70 200 18,455 x 80 200 21,705 x 90 200 30,155 x 100 100 33,905 x 120 100 66,606 x 40/40 200 13,906 x 45/45 200 14,706 x 50/50 200 15,556 x 50 200 15,556 x 60 200 18,50
Abmessung VPE Preis €
6 x 70 200 22,906 x 80 100 25,106 x 90 100 28,856 x 100 100 33,906 x 110 100 38,656 x 120 100 40,606 x 130 100 57,556 x 140 100 60,206 x 150 100 67,906 x 160 100 72,506 x 180 100 98,306 x 200 100 109,656 x 220 100 124,106 x 240 100 133,056 x 260 100 141,40
Preise per 100 Stück
04 / 2019 Seite 13
Multi-Monti plus Schraubanker 6-kt.
verz. blauHECO
künftig ISO / EN
10.9-
Abmessung VPE Preis €
6 x 50 100 31,757,5 x 50 50 40,057,5 x 60 50 41,957,5 x 80 50 66,507,5 x 80 50 68,907,5 x 100 50 74,557,5 x 100 50 80,107,5 x 140 50 99,3510 x 60 25 89,3510 x 80 25 104,1510 x 100 25 108,1510 x 160 25 140,2512 x 80 25 122,4012 x 90 25 131,4012 x 100 25 134,9512 x 140 25 160,8512 x 160 25 176,6512 x 200 25 285,6512 x 240 25 363,5514 x 110 25 303,8514 x 130 25 335,0516 x 120 10 427,1516 x 130 10 457,45
Seite 14 04 / 2019
Preise per 100 Stück
Multi-Monti plus Schraubanker, Flachkopf
verz. blauHECO
künftig ISO / EN
10.9-
Abmessung VPE Preis €
10 x 70 25 80,357,5 x 50/5 100 38,456 x 40 100 18,756 x 50 100 19,60
Preise per 100 Stück
04 / 2019 Seite 15
Multi-Monti Schraubanker, Senkkopf
verz. blauHECO
künftig ISO / EN
10.9-
Abmessung VPE Preis €
5 x 50 200 16,855 x 60 100 20,706 x 60 100 28,607,5 x 60 50 34,857,5 x 80 50 54,0510 x 80 25 99,50
Seite 16 04 / 2019
Preise per 100 Stück
Ensatbuchsen Stahl verzinkt blau
InnengewindeGesamtlängeAussengewinde
M 48
6.5x0.75
M 510
8x1
M 614
10x1.5
M 815
12x1.5
M 1018
14x1.5
M 1222
16x1.5
M 1424
18x1.5
M 1622
20x1.5
verz. blauEnsat
künftig ISO / EN Typ 302…11
gehärtet-
Abmessung VPE Preis €
2,5 250 22,053 250 22,054 250 28,855 250 33,306 250 42,708 250 52,9010 250 77,5012 100 107,4014 100 132,9016 100 175,30
Preise per 100 Stück
04 / 2019 Seite 17
Ensatbuchsen Edelstahl 1.4105
InnengewindeGesamtlängeAussengewinde
M 48
6.5x0.75
M 510
8x1
M 614
10x1.5
M 815
12x1.5
M 1018
14x1.5
M 1222
16x1.5
M 1424
18x1.5
M 1622
20x1.5
blankEnsat
künftig ISO / EN Typ 302...40
A1-
Abmessung VPE Preis €
3 250 56,904 250 75,455 250 85,556 250 109,058 250 136,8510 250 200,7512 100 355,75
Seite 18 04 / 2019
Preise per 100 Stück
Ensatbuchsen Edelstahl 1.4305
InnengewindeGesamtlängeAussengewinde
M36
5x0.5
M 48
6.5x0.75
M 510
8x1
M 614
10x1.5
M 815
12x1.5
M 1018
14x1.5
M 1222
16x1.5
M 1424
18x1.5
M 1622
20x1.5
blankEnsat
künftig ISO / EN Typ 302...50
A2-
Abmessung VPE Preis €
3 250 128,904 250 137,605 250 141,956 250 158,158 100 213,6010 100 285,9012 50 399,0014 50 524,60
Preise per 100 Stück
04 / 2019 Seite 19
Ösenschrauben mit metrischem Gewinde Art. 48, vz
Eyeletted screws with metric thread
db
M 35
M 46
M 58
M 610
M 812
M 1014
M 1217
verz. blauArt. Art. 48
künftig ISO / EN
Stahl
Vis à anneaux
-
Abmessung VPE Preis €
4 x 10 100 12,204 x 12 100 12,554 x 15 100 12,554 x 20 100 12,854 x 25 100 13,854 x 30 100 15,704 x 40 100 16,805 x 20 100 15,505 x 25 100 15,705 x 30 100 16,005 x 40 100 19,206 x 10 100 17,956 x 15 100 18,206 x 20 100 18,556 x 25 100 18,956 x 30 100 19,206 x 40 100 23,106 x 50 100 25,708 x 20 50 40,008 x 30 50 42,608 x 40 50 45,358 x 50 50 48,208 x 60 50 53,758 x 70 50 80,9010 x 60 50 114,4510 x 80 50 131,90
Seite 20 04 / 2019
Preise per 100 Stück
Kegelstifte, Form B, gedreht
Taper pins
d1 h10c max.r
1,50,231,5
2,00,3
2
3,00,45
3
4,00,6
4
5,00,75
5
6,00,9
6
8,01,2
8
10,01,510
12,01,812
14,02
16
16,02,516
blankDIN 1
künftig ISO / EN i02339
Stahl
Goupilles coniques
-
Abmessung VPE Preis €
1,5 x 8 200 8,451,5 x 10 200 10,041,5 x 12 200 11,481,5 x 14 200 9,851,5 x 16 200 12,021,5 x 18 200 12,561,5 x 20 200 13,412,0x 10 200 11,072,0x 12 200 11,792,0x 14 200 12,242,0x 16 200 13,282,0x 18 200 13,372,0x 20 200 13,822,0x 22 200 12,352,0x 24 200 15,392,0x 26 200 15,712,0x 28 200 16,202,0x 30 200 17,912,0x 32 200 15,252,0x 36 200 19,802,0x 40 200 21,152,0x 50 200 25,522,5 x 10 200 11,792,5 x 12 200 12,292,5 x 14 200 12,652,5 x 16 200 13,102,5 x 18 200 13,912,5 x 20 200 14,452,5 x 22 200 12,952,5 x 24 200 15,442,5 x 26 200 16,562,5 x 28 200 17,332,5 x 30 200 19,352,5 x 32 200 20,482,5 x 36 200 21,562,5 x 40 200 23,133 x 10 200 10,153 x 12 200 12,653 x 14 200 13,103 x 16 200 13,733 x 18 200 14,45
Abmessung VPE Preis €
3 x 20 200 15,623 x 22 200 14,053 x 24 200 16,023 x 26 200 17,153 x 28 200 18,863 x 30 200 21,153 x 32 200 22,103 x 36 200 23,133 x 40 200 24,933 x 45 200 27,363 x 50 200 32,273 x 55 200 29,303 x 60 200 32,054 x 10 200 12,654 x 12 200 13,104 x 14 200 13,914 x 16 200 14,454 x 18 200 15,124 x 20 200 15,754 x 22 200 14,954 x 24 200 18,414 x 26 200 18,864 x 28 200 20,754 x 30 200 22,104 x 32 200 23,584 x 36 200 27,364 x 40 200 28,854 x 45 200 31,144 x 50 200 34,384 x 55 200 31,304 x 60 200 45,324 x 70 200 41,054 x 80 200 54,775 x 10 200 11,005 x 12 200 13,915 x 14 200 14,855 x 16 200 15,715 x 18 200 16,115 x 20 200 17,605 x 22 200 16,105 x 24 200 19,40
Abmessung VPE Preis €
5 x 26 200 21,565 x 28 200 22,505 x 30 200 25,795 x 32 200 27,865 x 36 200 32,815 x 40 200 32,725 x 45 200 36,505 x 50 200 42,215 x 55 200 35,755 x 60 200 53,245 x 70 200 63,325 x 80 200 65,976 x 10 200 13,756 x 12 200 16,656 x 14 200 14,956 x 16 200 16,106 x 18 200 19,226 x 20 200 20,166 x 22 200 19,606 x 24 200 24,576 x 26 200 26,426 x 28 200 28,856 x 30 200 33,446 x 32 200 37,176 x 36 200 37,676 x 40 200 39,066 x 45 200 47,126 x 50 200 51,086 x 55 200 55,266 x 60 200 61,256 x 70 200 75,026 x 80 200 78,716 x 90 200 89,106 x 100 200 102,068 x 24 200 32,458 x 26 200 35,008 x 28 200 37,508 x 30 200 46,768 x 32 200 49,508 x 36 200 52,978 x 40 200 58,14
Preise per 100 Stück
04 / 2019 Seite 21
Kegelstifte, Form B, gedreht
Taper pins
d1 h10c max.r
1,50,231,5
2,00,3
2
3,00,45
3
4,00,6
4
5,00,75
5
6,00,9
6
8,01,2
8
10,01,510
12,01,812
14,02
16
16,02,516
blankDIN 1
künftig ISO / EN i02339
Stahl
Goupilles coniques
-
Abmessung VPE Preis €
8 x 45 200 58,018 x 50 200 64,318 x 55 200 67,558 x 60 200 87,898 x 70 200 101,708 x 80 200 117,548 x 90 200 141,758 x 100 200 157,828 x 120 100 193,1010 x 32 100 77,3610 x 36 100 73,4010 x 40 100 86,9010 x 45 100 97,8310 x 50 100 107,4210 x 55 100 105,7510 x 60 100 161,7810 x 70 100 180,8110 x 80 100 195,0310 x 90 100 227,3910 x 100 100 243,7710 x 110 100 203,6010 x 120 100 292,3712 x 36 100 83,9512 x 40 100 113,2712 x 45 100 127,7612 x 50 100 134,8712 x 55 100 130,7012 x 60 100 162,8612 x 70 100 190,5312 x 80 100 213,7112 x 90 100 243,5412 x 100 100 274,1012 x 110 100 264,4012 x 120 100 347,7616 x 70 50 233,1016 x 80 50 275,1816 x 100 50 378,0020 x 50 50 384,93
Seite 22 04 / 2019
Preise per 100 Stück
Zylinderstifte Toleranzfeld h8, 9S20K
Parallel pins
d h8c max.r ø
1,00,15
1
1,50,231,6
2,00,3
2
2,50,42,5
3,00,45
3
4,00,6
4
5,00,75
5
6,00,9
6
8,01,2
8
10,01,510
12,01,812
14,02
16
16,02,516
20,03
20
blankDIN 7
künftig ISO / EN i02338
Stahl
Goupilles cylindriques
-
Abmessung VPE Preis €
2,0 x 6 200 3,902,0 x 8 200 4,002,0 x 10 200 4,102,0 x 12 200 4,302,0 x 14 200 4,302,0 x 18 200 5,203 x 6 200 5,203 x 8 200 6,103 x 10 200 5,203 x 12 200 6,103 x 14 200 6,603 x 16 200 7,103 x 18 200 7,403 x 20 200 7,803 x 24 200 8,203 x 28 200 9,003 x 30 200 9,103 x 32 200 9,353 x 40 200 10,104 x 6 200 6,104 x 8 200 7,304 x 10 200 7,304 x 12 200 7,804 x 14 200 8,004 x 16 200 8,704 x 18 200 9,104 x 20 200 9,304 x 24 200 10,104 x 28 200 10,704 x 30 200 11,004 x 32 200 12,004 x 36 200 12,704 x 40 200 13,604 x 50 200 14,605 x 8 200 9,605 x 10 200 9,005 x 12 200 9,505 x 14 200 9,805 x 16 200 9,905 x 18 200 11,105 x 20 200 11,10
Abmessung VPE Preis €
5 x 24 200 11,605 x 28 200 12,505 x 30 200 13,105 x 32 200 13,505 x 36 200 14,105 x 40 200 15,806 x 10 200 9,906 x 12 200 11,406 x 14 200 11,606 x 16 200 12,006 x 18 200 13,106 x 20 200 14,506 x 24 200 15,406 x 28 200 16,506 x 30 200 17,106 x 32 200 17,806 x 36 200 19,006 x 40 200 22,006 x 45 200 20,856 x 50 200 26,706 x 60 200 31,508 x 12 200 16,308 x 14 200 18,208 x 16 200 18,908 x 18 200 19,608 x 20 200 21,708 x 24 200 23,408 x 28 200 25,708 x 30 200 27,108 x 32 200 28,208 x 36 200 30,708 x 40 200 33,108 x 45 200 35,308 x 50 200 37,408 x 55 200 42,008 x 60 200 45,308 x 70 200 50,308 x 80 200 55,9510 x 20 200 62,1010 x 24 200 64,6010 x 32 200 73,60
Abmessung VPE Preis €
10 x 36 200 76,2010 x 40 200 74,8010 x 45 200 81,1010 x 50 200 84,3010 x 60 200 89,1010 x 70 200 98,0010 x 80 200 104,4012 x 24 200 75,5012 x 36 200 87,3012 x 40 200 90,2012 x 45 200 96,5012 x 50 200 101,0012 x 60 200 110,2012 x 70 200 119,4012 x 80 100 128,5016 x 32 200 137,9016 x 40 200 151,6016 x 50 200 171,3016 x 60 200 188,50
Preise per 100 Stück
04 / 2019 Seite 23
Zylinderstifte Toleranzfeld m6, 9S20K
Parallel pins
d m6c max.r ø
1,00,15
1
1,50,231,6
2,00,3
2
2,50,42,5
3,00,45
3
4,00,6
4
5,00,75
5
6,00,9
6
8,01,2
8
10,01,510
12,01,812
14,02
16
16,02,516
20,03
20
blankDIN 7
künftig ISO / EN i02338
Stahl
Goupilles cylindriques
-
Abmessung VPE Preis €
1 x 3 200 3,801 x 5 200 3,601 x 6 200 3,001 x 8 200 3,101 x 12 200 3,501,5 x 4 200 3,201,5 x 5 200 3,601,5 x 6 200 3,401,5 x 8 200 3,501,5 x 10 200 3,601,5 x 12 200 3,701,5 x 14 200 3,801,5 x 16 200 3,901,5 x 20 200 4,201,5 x 24 200 4,902,0 x 4 200 3,402,0 x 5 200 3,502,0 x 6 200 3,802,0 x 8 200 3,902,0 x 10 200 4,102,0 x 12 200 4,402,0 x 14 200 4,602,0 x 16 200 4,802,0 x 18 200 5,002,0 x 20 200 5,302,0 x 24 200 6,002,0 x 28 200 6,502,5 x 4 200 3,502,5 x 5 200 4,202,5 x 6 200 4,102,5 x 8 200 4,302,5 x 10 200 4,402,5 x 12 200 5,502,5 x 14 200 5,802,5 x 16 200 5,902,5 x 18 200 6,102,5 x 20 200 6,302,5 x 24 200 6,803 x 4 200 3,903 x 5 200 4,203 x 6 200 4,20
Abmessung VPE Preis €
3 x 8 200 4,403 x 10 200 4,603 x 12 200 5,703 x 14 200 6,303 x 16 200 7,103 x 18 200 7,403 x 20 200 7,803 x 24 200 8,203 x 26 200 9,003 x 28 200 9,003 x 30 200 9,103 x 32 200 10,103 x 36 200 11,503 x 40 200 12,904 x 5 200 6,704 x 6 200 6,104 x 8 200 6,704 x 10 200 7,104 x 12 200 7,804 x 14 200 8,004 x 16 200 8,704 x 18 200 9,104 x 20 200 9,304 x 22 200 10,004 x 24 200 10,104 x 26 200 10,704 x 28 200 10,704 x 30 200 11,004 x 32 200 12,004 x 36 200 12,704 x 40 200 13,604 x 45 200 14,704 x 50 200 16,704 x 55 200 20,304 x 60 200 21,805 x 8 200 7,605 x 10 200 8,305 x 12 200 8,605 x 14 200 13,205 x 16 200 9,905 x 18 200 10,40
Abmessung VPE Preis €
5 x 20 200 11,205 x 22 200 11,505 x 24 200 11,605 x 26 200 12,405 x 28 200 12,905 x 30 200 13,605 x 32 200 14,005 x 36 200 15,505 x 40 200 17,105 x 45 200 19,005 x 50 200 21,005 x 55 200 22,905 x 60 200 24,705 x 70 200 60,606 x 8 200 9,206 x 10 200 10,006 x 12 200 11,006 x 14 200 11,706 x 16 200 12,206 x 18 200 13,106 x 20 200 14,506 x 22 200 15,006 x 24 200 15,406 x 26 200 16,506 x 28 200 16,506 x 30 200 17,406 x 32 200 18,306 x 36 200 19,706 x 40 200 21,606 x 45 200 22,606 x 50 200 29,306 x 55 200 31,406 x 60 200 33,906 x 70 200 48,306 x 80 200 55,806 x 90 200 96,708 x 10 200 28,808 x 12 200 18,808 x 14 200 18,308 x 16 200 18,908 x 18 200 19,70
Seite 24 04 / 2019
Preise per 100 Stück
Zylinderstifte Toleranzfeld m6, 9S20K
Parallel pins
d m6c max.r ø
1,00,15
1
1,50,231,6
2,00,3
2
2,50,42,5
3,00,45
3
4,00,6
4
5,00,75
5
6,00,9
6
8,01,2
8
10,01,510
12,01,812
14,02
16
16,02,516
20,03
20
blankDIN 7
künftig ISO / EN i02338
Stahl
Goupilles cylindriques
-
Abmessung VPE Preis €
8 x 20 200 21,708 x 24 200 25,208 x 26 200 26,108 x 28 200 27,408 x 30 200 29,108 x 32 200 30,208 x 36 200 31,708 x 40 200 33,108 x 45 200 38,908 x 50 200 40,208 x 55 200 43,908 x 60 200 45,608 x 70 200 53,908 x 80 200 92,808 x 90 200 86,308 x 100 200 149,408 x 120 200 162,4010 x 12 100 26,1010 x 16 100 29,8010 x 18 100 31,2010 x 20 100 32,6010 x 24 100 35,6010 x 28 100 38,2010 x 30 100 40,6010 x 32 100 42,1010 x 36 100 46,0010 x 40 100 51,4010 x 45 100 53,7010 x 50 100 63,1010 x 55 100 68,9010 x 60 100 72,2010 x 70 100 91,9010 x 80 100 102,9010 x 90 100 123,4010 x 100 100 134,8012 x 20 100 43,0012 x 24 100 47,7012 x 28 100 58,6012 x 30 100 64,5012 x 32 100 69,2012 x 36 100 75,50
Abmessung VPE Preis €
12 x 40 100 83,6012 x 45 100 93,2012 x 50 100 102,2012 x 55 100 112,0012 x 60 100 118,9012 x 70 100 135,7012 x 80 100 150,6012 x 90 100 163,7012 x 100 100 183,5012 x 120 100 210,9014 x 50 100 204,3014 x 60 100 234,2016 x 32 100 165,2016 x 36 100 177,6016 x 40 100 199,8016 x 45 100 227,1016 x 50 100 245,0016 x 55 100 260,7016 x 60 100 284,1016 x 70 100 322,5016 x 80 100 364,3016 x 90 100 413,7016 x 100 100 443,0016 x 120 100 535,8020 x 36 50 294,0020 x 40 50 319,6020 x 45 50 349,0020 x 50 50 377,3020 x 55 50 398,3020 x 60 50 436,5020 x 70 50 480,9020 x 80 50 529,1020 x 90 50 598,0020 x 100 50 670,8020 x 120 50 781,8025 x 70 50 864,4025 x 80 50 946,80
Preise per 100 Stück
04 / 2019 Seite 25
Zylinderstifte Toleranzfeld m6, 1.4305
Parallel pins
d m6c max.r =
20,3
2
30,45
3
40,6
4
50,75
5
60,9
6
81,2
8
101,510
121,812
blankDIN 7
künftig ISO / EN i02338
A1
Goupilles cylindriques
-
Abmessung VPE Preis €
1,0 x 10 500 9,301,0 x 12 500 10,351,5 x 3 500 8,801,5 x 6 500 8,801,5 x 8 500 9,301,5 x 10 500 9,302,0 x 3 500 7,252,0 x 4 500 7,252,0 x 5 500 7,752,0 x 6 500 7,752,0 x 8 500 9,302,0 x 10 500 9,302,0 x 12 500 9,852,0 x 16 500 11,402,0 x 18 500 12,402,0 x 20 500 13,952,5 x 8 500 9,302,5 x 10 500 9,302,5 x 12 500 9,852,5 x 14 500 11,402,5 x 16 500 12,402,5 x 18 500 12,402,5 x 20 500 13,952,5 x 24 500 15,003 x 4 200 8,803 x 5 200 9,303 x 6 200 9,853 x 8 200 11,403 x 10 200 11,903 x 12 200 13,453 x 14 200 14,503 x 16 200 16,053 x 18 200 16,553 x 20 200 18,603 x 20 200 20,453 x 30 200 22,753 x 32 200 23,804 x 8 200 16,554 x 10 200 19,154 x 12 200 21,204 x 14 200 23,25
Abmessung VPE Preis €
4 x 16 200 25,304 x 18 200 27,404 x 20 200 29,454 x 24 200 33,604 x 28 200 38,254 x 30 200 39,254 x 32 200 41,354 x 36 200 47,004 x 40 200 51,655 x 8 100 18,955 x 10 100 22,755 x 12 100 23,805 x 14 100 26,905 x 16 100 27,905 x 18 100 31,505 x 20 100 33,605 x 24 100 38,255 x 28 100 42,905 x 30 100 48,955 x 32 100 47,555 x 36 100 51,155 x 40 100 56,805 x 50 100 68,706 x 8 100 26,906 x 10 100 32,056 x 12 100 32,056 x 16 100 38,256 x 20 100 44,956 x 24 100 50,106 x 28 100 56,806 x 30 100 58,906 x 32 100 62,006 x 35 100 69,756 x 40 100 76,956 x 50 100 91,956 x 60 100 105,908 x 10 100 47,008 x 16 100 60,458 x 20 100 70,758 x 24 100 79,058 x 28 100 88,85
Abmessung VPE Preis €
8 x 30 100 91,958 x 32 100 97,608 x 36 100 107,958 x 40 100 118,808 x 45 100 130,158 x 50 100 142,058 x 55 100 154,958 x 60 100 167,858 x 70 100 193,1510 x 20 50 107,4510 x 24 50 121,3510 x 30 50 142,5510 x 36 50 165,8010 x 40 50 184,9010 x 45 50 204,0010 x 60 50 260,0010 x 70 50 312,4510 x 80 50 349,1012 x 16 25 137,9012 x 24 25 162,7012 x 28 25 198,4012 x 30 25 211,2512 x 36 25 242,7512 x 50 25 162,7012 x 60 25 380,6016 x 40 25 550,50
Seite 26 04 / 2019
Preise per 100 Stück
Zylinderschrauben mit Schlitz, vz
Slotted cheese head screws
ddkk
M 23,81,3
M 2,54,51,6
M 35,5
2
M 47
2,6
M 58,53,3
M 6103,9
M 8135
M 10166
verz. blauDIN 84
künftig ISO / EN i01207
4.8
Vis à tête cylindrique fendue
-
Abmessung VPE Preis €
2,0 x 3 2000 3,452,0 x 4 2000 2,902,0 x 5 2000 2,802,0 x 6 2000 2,452,0 x 8 2000 2,452,0 x 10 2000 2,652,0 x 12 2000 2,802,0 x 14 2000 4,102,0 x 16 2000 3,252,0 x 18 2000 5,352,0 x 20 2000 3,902,5 x 4 2000 3,252,5 x 5 2000 2,752,5 x 6 2000 2,402,5 x 8 2000 2,402,5 x 10 2000 2,502,5 x 12 2000 2,552,5 x 14 2000 3,702,5 x 16 2000 3,202,5 x 18 2000 4,502,5 x 20 2000 3,903,0 x 3 2000 6,853,0 x 4 2000 5,503,0 x 5 2000 5,303,0 x 6 2000 4,053,0 x 8 2000 2,253,0 x 10 2000 2,203,0 x 12 2000 2,303,0 x 14 2000 3,003,0 x 16 2000 3,003,0 x 18 2000 3,453,0 x 20 2000 3,453,0 x 22 2000 4,203,0 x 25 2000 4,203,0 x 30 2000 4,603,0 x 35 1000 6,203,0 x 40 1000 6,653,0 x 45 1000 8,753,0 x 50 1000 9,653,0 x 60 1000 13,103,5 x 5 2000 6,05
Abmessung VPE Preis €
3,5 x 6 2000 4,253,5 x 8 2000 2,653,5 x 10 2000 2,653,5 x 12 2000 2,753,5 x 16 2000 3,253,5 x 20 2000 3,503,5 x 25 2000 4,453,5 x 30 2000 5,053,5 x 35 2000 6,403,5 x 40 1000 6,854 x 5 2000 6,904 x 6 2000 4,404 x 8 2000 3,054 x 10 2000 3,054 x 12 2000 3,154 x 14 2000 3,454 x 16 2000 3,454 x 18 2000 3,504 x 20 2000 3,504 x 22 2000 4,854 x 25 1000 4,854 x 30 1000 5,504 x 35 1000 6,504 x 40 1000 7,054 x 45 1000 8,754 x 50 500 9,704 x 55 500 12,504 x 60 500 13,354 x 65 500 20,754 x 70 500 20,754 x 75 200 22,154 x 80 200 22,155 x 6 2000 9,455 x 8 2000 4,355 x 10 2000 4,505 x 12 1000 4,855 x 14 1000 5,055 x 16 1000 5,055 x 18 1000 5,505 x 20 1000 5,505 x 22 1000 5,90
Abmessung VPE Preis €
5 x 25 1000 5,905 x 30 1000 7,305 x 35 500 9,305 x 40 500 10,305 x 45 500 10,655 x 50 500 11,405 x 55 500 14,505 x 60 200 14,955 x 65 200 21,605 x 70 200 22,305 x 75 200 23,455 x 80 200 23,456 x 8 1000 8,106 x 10 1000 6,106 x 12 1000 6,256 x 14 1000 6,856 x 16 1000 6,856 x 18 1000 7,456 x 20 1000 7,456 x 22 500 8,406 x 25 500 8,406 x 30 500 9,156 x 35 500 11,056 x 40 500 12,056 x 45 500 13,406 x 50 200 14,106 x 55 200 15,506 x 60 200 16,506 x 65 200 22,806 x 70 200 23,656 x 75 200 25,106 x 80 200 25,106 x 90 200 30,206 x 100 200 32,908 x 10 500 39,008 x 12 500 19,508 x 14 500 14,058 x 16 500 14,058 x 20 500 15,008 x 22 500 17,558 x 25 500 15,95
Preise per 100 Stück
04 / 2019 Seite 27
Zylinderschrauben mit Schlitz, vz
Slotted cheese head screws
ddkk
M 23,81,3
M 2,54,51,6
M 35,5
2
M 47
2,6
M 58,53,3
M 6103,9
M 8135
M 10166
verz. blauDIN 84
künftig ISO / EN i01207
4.8
Vis à tête cylindrique fendue
-
Abmessung VPE Preis €
8 x 30 200 16,408 x 35 200 17,758 x 40 200 18,408 x 45 200 19,958 x 50 200 21,208 x 55 200 23,008 x 60 200 24,558 x 65 200 28,708 x 70 200 28,708 x 75 200 36,308 x 80 100 33,458 x 90 100 37,958 x 100 100 41,7510 x 16 200 22,2510 x 20 200 22,6510 x 25 200 23,7010 x 30 200 27,1510 x 35 200 28,6010 x 40 200 29,3010 x 45 100 32,1510 x 50 100 34,2510 x 60 100 39,5510 x 70 100 44,0010 x 80 100 52,2010 x 90 100 59,7010 x 100 100 71,10
Seite 28 04 / 2019
Preise per 100 Stück
Zylinderschrauben mit Schlitz, A2
Slotted cheese head screws
ddkk
M 23,81,3
M 2,54,51,6
M 35,5
2
M 47
2,6
M 58,53,3
M 6103,9
M 8135
M 10166
blankDIN 84
künftig ISO / EN i01207
A2
Vis à tête cylindrique fendue
-
Abmessung VPE Preis €
2,0 x 3 1000 2,952,0 x 4 1000 2,852,0 x 5 1000 2,902,0 x 6 1000 2,952,0 x 8 1000 3,102,0 x 10 1000 3,352,0 x 12 1000 3,802,0 x 14 1000 5,302,0 x 16 1000 4,102,0 x 18 1000 7,552,0 x 20 1000 5,852,0 x 25 500 7,002,0 x 30 500 16,552,5 x 3 1000 2,952,5 x 4 1000 2,852,5 x 5 1000 2,902,5 x 6 1000 2,952,5 x 8 1000 3,102,5 x 10 1000 3,352,5 x 12 1000 3,802,5 x 14 1000 5,302,5 x 16 1000 4,102,5 x 18 1000 7,552,5 x 20 500 5,852,5 x 22 500 9,052,5 x 25 500 7,002,5 x 30 500 16,553,0 x 3,0 500 8,303,0 x 4 500 4,503,0 x 5 500 3,103,0 x 6 500 2,303,0 x 8 500 2,103,0 x 10 500 2,053,0 x 12 500 2,203,0 x 14 500 3,153,0 x 16 500 2,453,0 x 18 500 3,553,0 x 20 500 2,753,0 x 22 500 4,453,0 x 25 500 3,403,0 x 28 500 6,20
Abmessung VPE Preis €
3,0 x 30 500 4,853,0 x 35 500 6,953,0 x 40 500 9,053,0 x 45 200 19,653,0 x 50 200 19,653,0 x 60 200 33,353,5 x 5 500 11,403,5 x 6 500 10,603,5 x 8 500 10,603,5 x 10 500 10,353,5 x 12 500 11,103,5 x 16 500 11,903,5 x 20 500 14,753,5 x 25 500 19,903,5 x 30 500 21,953,5 x 35 500 27,653,5 x 40 500 31,504 x 4 500 8,254 x 5 500 5,654 x 6 500 3,254 x 8 500 3,254 x 10 500 3,004 x 12 500 2,954 x 14 500 4,254 x 16 500 3,254 x 18 500 4,504 x 20 500 3,504 x 22 500 5,304 x 25 500 4,104 x 28 500 6,954 x 30 500 5,354 x 35 500 7,604 x 40 500 9,804 x 45 500 11,954 x 50 500 14,954 x 55 500 20,154 x 60 500 20,154 x 70 200 30,254 x 80 200 34,104 x 90 200 37,704 x 100 200 42,10
Abmessung VPE Preis €
5 x 6 500 4,955 x 8 500 4,955 x 10 500 4,055 x 12 500 4,255 x 14 500 6,005 x 16 500 4,605 x 18 500 6,455 x 20 500 5,005 x 22 500 7,555 x 25 500 5,805 x 28 500 8,955 x 30 500 6,905 x 35 500 8,805 x 40 500 11,405 x 45 200 13,055 x 50 200 16,855 x 55 200 27,155 x 60 200 27,155 x 70 200 34,705 x 80 200 38,455 x 90 200 42,105 x 100 200 45,456 x 6 500 6,356 x 8 500 6,356 x 10 500 6,356 x 12 500 5,756 x 14 500 8,106 x 16 500 6,206 x 18 500 9,256 x 20 500 7,156 x 22 200 9,706 x 25 200 7,456 x 30 200 8,906 x 35 200 10,356 x 40 200 12,506 x 45 200 13,956 x 50 200 23,906 x 55 200 29,856 x 60 200 29,856 x 70 200 39,706 x 80 200 45,25
Preise per 100 Stück
04 / 2019 Seite 29
Zylinderschrauben mit Schlitz, A2
Slotted cheese head screws
ddkk
M 23,81,3
M 2,54,51,6
M 35,5
2
M 47
2,6
M 58,53,3
M 6103,9
M 8135
M 10166
blankDIN 84
künftig ISO / EN i01207
A2
Vis à tête cylindrique fendue
-
Abmessung VPE Preis €
6 x 90 200 50,656 x 100 200 56,308 x 10 200 23,258 x 12 200 17,558 x 16 200 16,058 x 20 200 16,558 x 25 200 17,558 x 30 200 19,658 x 35 200 23,258 x 40 200 26,908 x 45 200 31,008 x 50 200 35,158 x 60 100 43,408 x 70 100 58,908 x 80 100 68,208 x 90 100 77,508 x 100 100 86,8010 x 16 100 40,8010 x 20 100 28,4010 x 25 100 30,5010 x 30 100 33,0510 x 35 100 36,7010 x 40 100 40,3010 x 45 100 51,1510 x 50 100 56,8010 x 60 100 74,4010 x 70 50 97,6010 x 80 50 113,1010 x 90 50 127,5510 x 100 50 139,45
Seite 30 04 / 2019
Preise per 100 Stück
Flachkopfschrauben mit Schlitz, vz
Slotted pan head screws
ddkk
M 36
1,8
M 48
2,4
M 5103
M 6123,6
M 8164,8
verz. blauDIN 85
künftig ISO / EN i01580
4.8
Vis à tête cylindrique aplatie, fendue
-
Abmessung VPE Preis €
3,0 x 5 2000 5,803,0 x 6 2000 4,403,0 x 8 2000 2,453,0 x 10 2000 2,403,0 x 12 2000 2,503,0 x 16 2000 3,303,0 x 18 2000 3,803,0 x 20 2000 3,803,0 x 25 2000 4,503,0 x 30 2000 5,004 x 5 2000 7,604 x 6 2000 4,854 x 8 2000 3,404 x 10 2000 3,404 x 12 2000 3,454 x 16 2000 3,804 x 20 2000 3,854 x 25 1000 5,304 x 30 1000 6,054 x 35 1000 7,104 x 40 1000 7,754 x 45 1000 9,604 x 50 500 10,705 x 6 2000 10,405 x 8 2000 4,805 x 10 2000 4,955 x 12 2000 5,355 x 16 2000 5,605 x 18 2000 6,055 x 20 2000 6,055 x 25 2000 6,505 x 30 2000 8,005 x 35 500 10,305 x 40 500 11,355 x 45 500 11,655 x 50 500 12,506 x 10 500 6,756 x 12 500 6,856 x 16 500 7,606 x 20 500 8,206 x 25 500 9,15
Abmessung VPE Preis €
6 x 30 500 10,056 x 35 500 12,156 x 40 500 13,256 x 45 500 14,706 x 50 200 14,708 x 10 500 43,008 x 12 500 21,458 x 16 500 15,508 x 20 500 16,458 x 25 500 17,558 x 30 200 18,008 x 35 200 19,008 x 40 200 19,308 x 45 200 20,858 x 50 200 22,30
Preise per 100 Stück
04 / 2019 Seite 31
Flachkopfschrauben mit Schlitz, A2
Slotted pan head screws
ddkk
M 36
1,8
M 48
2,4
M 5103
M 6123,6
M 8164,8
blankDIN 85
künftig ISO / EN i01580
A2
Vis à tête cylindrique aplatie, fendue
-
Abmessung VPE Preis €
2,0 x 4 1000 3,702,0 x 5 1000 3,752,0 x 6 1000 3,852,0 x 8 1000 4,052,0 x 10 1000 4,352,0 x 12 1000 4,902,0 x 16 1000 5,302,0 x 20 1000 7,602,5 x 4 1000 3,702,5 x 5 1000 3,752,5 x 6 1000 3,852,5 x 8 1000 4,052,5 x 10 1000 4,352,5 x 12 1000 4,902,5 x 16 1000 5,302,5 x 20 1000 7,602,5 x 25 1000 9,853,0x 4 500 5,653,0x 5 500 4,103,0x 6 500 2,753,0x 8 500 2,553,0x 10 500 2,403,0x 12 500 2,603,0x 16 500 2,953,0x 20 500 3,253,0x 25 500 3,953,0x 30 500 5,203,0x 35 500 7,603,0x 40 500 11,803,0x 45 500 22,253,0x 50 500 22,254 x 5 500 6,754 x 6 500 3,904 x 8 500 3,904 x 10 500 3,604 x 12 500 3,604 x 16 500 3,904 x 20 500 4,154 x 25 500 4,954 x 30 500 5,854 x 35 500 9,25
Abmessung VPE Preis €
4 x 40 500 12,404 x 45 500 18,004 x 50 500 18,005 x 6 500 8,755 x 8 500 7,705 x 10 500 6,005 x 12 500 4,955 x 16 500 5,205 x 20 500 5,555 x 25 500 6,505 x 30 500 7,355 x 35 500 10,455 x 40 500 12,105 x 45 200 14,255 x 50 200 28,205 x 60 200 36,155 x 70 200 42,106 x 8 500 11,106 x 10 500 7,606 x 12 500 6,956 x 16 500 7,456 x 20 500 8,206 x 25 200 8,806 x 30 200 10,706 x 35 200 12,106 x 40 200 13,706 x 45 200 15,956 x 50 200 32,556 x 55 200 51,406 x 60 200 44,656 x 70 200 51,408 x 10 200 27,908 x 12 200 26,608 x 16 200 26,608 x 20 200 26,608 x 25 200 29,458 x 30 200 31,758 x 35 200 45,458 x 40 200 45,458 x 50 200 59,40
Seite 32 04 / 2019
Preise per 100 Stück
Scheiben mit Lappen, blank
Tab washers with long flap
d1bd2is
3,24
1213
0,38
4,35
1414
0,38
5,36
17160,5
6,47
19180,5
8,48
2220
0,75
10,5102622
0,75
131230281
151233281
171536321
211842361
232050421
252050421
282358481,6
312663521,6
342868561,6
blankDIN 93
künftig ISO / EN
HV100
Freins d'écrous à 1 aileron
-
Abmessung VPE Preis €
d 3,2 1000 7,35d 3,7 1000 7,35d 4,3 1000 7,95d 5,3 1000 8,10d 6,4 1000 9,10d 8,4 1000 11,40d 10,5 500 13,20d 13 500 17,80d 15 250 19,65d 17 250 24,90d 19 250 26,30d 21 250 28,80d 23 100 42,25d 25 100 43,25d 28 100 82,10d 31 25 92,90d 34 25 106,30d 37 25 116,80d 40 25 136,60d 43 25 146,70d 46 25 165,65d 50 25 193,90d 54 25 209,60
Preise per 100 Stück
04 / 2019 Seite 33
Scheiben mit Lappen
Tab washers with long flap
d1bd2is
3,24
1213
0,38
4,35
1414
0,38
5,36
17160,5
6,47
19180,5
8,48
2220
0,75
10,5102622
0,75
131230281
151233281
171536321
211842361
232050421
252050421
282358481,6
312663521,6
342868561,6
blankDIN 93
künftig ISO / EN
A2
Freins d'écrous à 1 aileron
-
Abmessung VPE Preis €
d 6,4 500 40,30d 8,4 500 45,45d 10,5 500 59,40d 13 500 98,15d 15 200 116,20d 17 200 121,35d 21 200 170,45d 25 100 193,65d 28 100 227,25d 31 100 392,50
Seite 34 04 / 2019
Preise per 100 Stück
Splinte
Split pins
Nennmaßd1 max.a max.b =c max.
10,91,6
31,8
1,21
2,532
1,61,42,53,22,8
21,82,5
43,6
2,52,32,5
54,6
3,22,93,26,45,8
43,7
48
7,4
54,6
4109,2
6,35,9
412,611,8
87,5
41615
109,56,32019
1312,46,326
24,8
verz. blauDIN 94
künftig ISO / EN i01234
Stahl
Goupilles fendues
-
Abmessung VPE Preis €
1,0 x 6 1000 1,401,0 x 8 1000 1,401,0 x 10 1000 1,401,0 x 12 1000 1,401,0 x 14 1000 1,401,0 x 16 1000 1,401,0 x 18 1000 1,401,6 x 6 1000 1,801,6 x 8 1000 1,801,6 x 10 1000 1,801,6 x 12 1000 1,801,6 x 14 1000 1,801,6 x 16 1000 1,801,6 x 18 1000 1,801,6 x 20 1000 1,901,6 x 22 1000 2,051,6 x 25 1000 2,051,6 x 28 1000 2,251,6 x 32 1000 2,402,0 x 10 1000 2,052,0 x 12 1000 2,052,0 x 14 1000 2,052,0 x 16 1000 2,052,0 x 18 1000 2,052,0 x 20 1000 2,202,0 x 22 1000 2,302,0 x 25 1000 2,402,0 x 28 1000 2,552,0 x 32 1000 2,652,0 x 36 1000 2,852,0 x 40 1000 3,002,5 x 12 1000 2,452,5 x 14 1000 2,452,5 x 16 1000 2,452,5 x 18 1000 2,452,5 x 20 1000 2,652,5 x 22 1000 2,802,5 x 25 1000 2,952,5 x 28 1000 3,052,5 x 32 1000 3,202,5 x 36 1000 3,40
Abmessung VPE Preis €
2,5 x 40 1000 3,702,5 x 45 1000 3,902,5 x 50 1000 4,103,2 x 16 500 2,953,2 x 18 500 2,953,2 x 20 500 3,153,2 x 22 500 3,253,2 x 25 500 3,503,2 x 28 500 3,703,2 x 32 500 3,903,2 x 36 500 4,203,2 x 40 500 4,503,2 x 45 500 4,903,2 x 50 500 5,303,2 x 56 500 5,603,2 x 63 500 6,404,0 x 20 500 3,904,0 x 22 500 4,204,0 x 25 500 4,354,0 x 28 500 4,604,0 x 32 500 5,054,0 x 36 500 5,354,0 x 40 500 5,704,0 x 45 500 6,054,0 x 50 500 6,554,0 x 56 500 7,104,0 x 63 500 7,854,0 x 71 500 8,504,0 x 80 500 9,455,0 x 22 250 5,955,0 x 25 250 6,255,0 x 28 250 6,855,0 x 32 250 7,655,0 x 36 250 8,405,0 x 40 250 9,005,0 x 45 250 9,655,0 x 50 250 10,355,0 x 56 250 11,355,0 x 63 250 12,555,0 x 71 250 13,905,0 x 80 250 14,95
Abmessung VPE Preis €
5,0 x 90 250 16,505,0 x 100 250 18,556,3 x 32 250 11,556,3 x 36 250 12,556,3 x 40 250 13,506,3 x 45 250 14,456,3 x 50 250 15,606,3 x 56 250 17,306,3 x 63 250 19,756,3 x 71 250 21,106,3 x 80 250 23,006,3 x 90 250 25,656,3 x 100 250 28,906,3 x 112 250 32,706,3 x 125 250 36,858 x 40 100 27,808 x 45 100 29,558 x 50 100 31,458 x 56 100 34,058 x 63 100 36,258 x 71 100 38,858 x 80 100 42,458 x 90 100 45,558 x 100 100 48,708 x 112 100 55,658 x 125 100 64,258 x 140 100 71,4010 x 56 100 51,5510 x 63 100 54,2510 x 71 100 61,7010 x 80 100 68,0010 x 90 100 73,8010 x 100 100 82,3510 x 112 100 87,8510 x 125 100 96,1010 x 140 100 106,0513 x 90 50 144,1013 x 100 50 154,2513 x 112 50 169,0513 x 125 50 184,0513 x 140 50 200,60
Preise per 100 Stück
04 / 2019 Seite 35
Splinte
Split pins
Nennmaßd1 max.a max.b =c max.
1,61,42,53,22,8
2,01,82,5
43,6
2,52,32,5
54,6
3,22,93,26,45,8
43,7
48
7,4
54,6
4109,2
6,35,9
412,611,8
87,5
41615
blankDIN 94
künftig ISO / EN i01234
A2
Goupilles fendues
-
Abmessung VPE Preis €
1,6 x 20 1000 3,601,6 x 25 1000 4,202,0 x 20 1000 3,602,0 x 25 1000 4,202,0 x 45 1000 7,702,0 x 50 1000 9,252,5 x 12 1000 4,202,5 x 16 1000 5,852,5 x 20 1000 5,852,5 x 25 1000 6,802,5 x 32 1000 8,552,5 x 45 1000 10,902,5 x 50 1000 11,603,2 x 16 500 6,403,2 x 18 500 7,053,2 x 20 500 7,753,2 x 25 500 8,803,2 x 28 500 9,403,2 x 32 500 10,003,2 x 36 500 11,153,2 x 40 500 12,303,2 x 45 500 13,503,2 x 50 500 14,504 x 16 500 11,654 x 20 500 13,504 x 25 500 15,504 x 30 500 17,454 x 32 500 17,454 x 36 500 19,404 x 40 500 21,354 x 45 500 23,254 x 50 500 25,204 x 63 500 28,904 x 71 500 32,255 x 32 250 26,605 x 40 250 32,905 x 50 250 38,305 x 56 250 41,655 x 63 250 44,35
Seite 36 04 / 2019
Preise per 100 Stück
Scheiben
Washers
d1d2sfür Schrauben
2,25
0,3M 2
2,76
0,5M 2,5
3,27
0,5M 3
3,27
o,5M 3
4,39
0,8M 4
5,3101
M 5
6,4121,6
M 6
8,4161,6M 8
10,5202
M 10
13,0242,5
M 12
15,0282,5
M 14
17,0303
M 16
19,0343
M 18
21,0373
M 20
23,0393
M 22
blankDIN 125 A
künftig ISO / EN i 07089/7090
A2
Rondelles
-
Abmessung VPE Preis €
d 1,7 2000 2,60d 1,8 2000 2,60d 2,2 1000 2,25d 2,5 1000 2,25d 2,7 1000 2,25d 3,2 1000 1,65d 3,7 1000 1,65d 4,3 1000 1,65d 5,3 1000 2,00d 6,4 1000 2,40d 7,4 1000 5,05d 8,4 500 2,45d 10,5 500 5,00d 13 200 8,10d 15 200 11,70d 17 200 14,95d 19 200 21,10d 21 200 21,55d 23 100 41,85d 25 100 42,60d 28 50 72,30d 31 50 105,90d 34 25 170,45d 37 25 224,65d 40 25 338,25d 43 25 441,55d 46 10 552,55d 50 10 692,00
Preise per 100 Stück
04 / 2019 Seite 37
Federringe Form B
Single spring washers
Nennmaßd1d2 max.bs
22,14,40,90,5
2,52,65,1
10,6
33,16,21,30,8
44,17,61,50,9
55,19,21,81,2
66,1
11,82,51,6
88,1
14,832
1010,218,13,52,2
1212,221,1
42,5
1414,224,14,5
3
1616,227,4
53,5
1818,229,4
53,5
2020,233,6
64
2222,535,9
64
2424,5
4075
brüniertDIN 127 B
künftig ISO / EN
Stahl
Rondelles grower
-
Abmessung VPE Preis €
d 2 1000 0,95d 2,5 1000 0,95d 3 1000 1,15d 3,5 1000 1,25d 4 1000 0,95d 5 1000 1,05d 6 1000 1,70d 8 1000 2,55d 10 1000 3,70d 12 500 5,40d 14 200 8,75d 16 200 11,35d 18 200 12,20d 20 100 19,20d 22 100 22,15d 24 100 33,10d 27 50 37,15d 30 50 68,15d 33 25 101,00d 36 25 114,90d 42 25 220,00d 48 25 252,25
Seite 38 04 / 2019
Preise per 100 Stück
Federringe Form B verzinkt
Single spring washers
Nennmaßd1d2 max.bs
22,14,40,90,5
2,52,65,1
10,6
33,16,21,30,8
44,17,61,50,9
55,19,21,81,2
66,1
11,82,51,6
88,1
14,832
1010,218,13,52,2
1212,221,1
42,5
1414,224,14,5
3
1616,227,4
53,5
1818,229,4
53,5
2020,233,6
64
2222,535,9
64
2424,5
4075
verz. blauDIN 127 B
künftig ISO / EN
Stahl
Rondelles grower
-
Abmessung VPE Preis €
d 2 1000 1,05d 2,5 1000 1,05d 2,6 1000 1,00d 3 1000 1,25d 3,5 1000 1,30d 4 1000 1,15d 5 1000 1,35d 6 1000 2,35d 8 1000 3,90d 10 1000 5,70d 12 500 8,45d 14 200 13,55d 16 200 18,40d 18 200 20,05d 20 100 31,40d 22 100 35,45d 24 100 53,95d 27 50 60,05d 30 50 103,55d 33 25 151,40d 36 25 168,50d 42 25 310,50d 48 25 354,40
Preise per 100 Stück
04 / 2019 Seite 39
Federringe Form B
Single spring washers
Nennmaßd1d2 max.bs
22,14,40,9o,5
2,52,65,1
10,6
33,16,21,30,8
3,53,66,71,30,8
44,17,61,50,9
55,19,21,81,2
66,1
11,82,51,6
88,1
14,832
1010,218,13,52,2
1212,221,1
42,5
1414,224,14,5
3
1616,227,4
53,5
1818,229,4
53,5
2020,233,6
64
2222,535,9
64
blankDIN 127 B
künftig ISO / EN
A2
Rondelles grower
-
Abmessung VPE Preis €
d 2 1000 1,75d 2,3 1000 1,75d 2,5 1000 1,75d 2,6 1000 1,75d 3 1000 0,35d 3,5 1000 1,65d 4 1000 0,45d 5 1000 0,70d 6 1000 1,10d 8 1000 2,10d 10 500 2,80d 12 500 4,10d 14 500 7,20d 16 500 9,65d 18 200 15,50d 20 200 15,95d 22 100 32,55d 24 100 33,50d 27 50 46,00d 30 50 149,75d 33 50 289,20d 36 50 438,95
Seite 40 04 / 2019
Preise per 100 Stück
Hochspann-Federringe Form A
Spring washers, curved crinkled
Nennmaßd1d2 max.h max.s
33,16,21,30,7
44,17,61,40,8
55,19,21,7
1
66,1
11,82,21,3
88,2
14,92,751,6
1010,218,13,151,8
1212,221,13,652,1
1414,224,14,32,4
1616,227,45,12,8
1818,229,45,12,8
2020,233,65,93,2
2222,535,95,93,2
2424,5
407,5
4
2727,5
437,5
4
3030,548,210,5
6
brüniertDIN 128 A
künftig ISO / EN
Stahl
Rondelles élastiques à ressorts
-
Abmessung VPE Preis €
d 2 1000 1,05d 2,5 1000 1,05d 3 1000 1,30d 3,5 1000 1,35d 4 1000 1,05d 5 1000 1,15d 6 1000 1,80d 8 500 2,80d 10 500 4,00d 12 500 5,85d 14 500 9,45d 16 200 12,20d 18 200 14,05d 20 100 22,15d 22 100 25,45d 24 100 38,30d 27 50 43,00d 30 50 78,30
Preise per 100 Stück
04 / 2019 Seite 41
Hochspann-Federringe Form A, verzinkt
Spring washers, curved crinkled
Nennmaßd1d2 max.h max.s
33,16,21,30,7
44,17,61,40,8
55,19,21,7
1
66,1
11,82,21,3
88,2
14,92,751,6
1010,218,13,151,8
1212,221,13,652,1
1414,224,14,32,4
1616,227,45,12,8
1818,229,45,12,8
2020,233,65,93,2
2222,535,95,93,2
2424,5
407,5
4
2727,5
437,5
4
3030,548,210,5
6
verz. blauDIN 128 A
künftig ISO / EN
Stahl
Rondelles élastiques à ressorts
-
Abmessung VPE Preis €
d 2 1000 1,15d 2,5 1000 1,15d 3 1000 1,40d 3,5 1000 1,45d 4 1000 1,25d 5 1000 1,45d 6 1000 2,50d 8 500 4,20d 10 500 6,20d 12 500 9,05d 14 500 14,70d 16 200 19,95d 18 200 23,05d 20 100 36,10d 22 100 40,70d 24 100 62,10d 27 50 69,05d 30 50 118,90
Seite 42 04 / 2019
Preise per 100 Stück
Hochspann-Federringe Form A, A2
Spring washers, curved crinkled
Nennmaßd1d2 max.h max.s
33,16,21,30,7
44,17,61,40,8
55,19,21,7
1
66,1
11,82,21,3
88,2
14,92,751,6
1010,218,13,151,8
1212,221,13,652,1
1414,224,14,32,4
1616,227,45,12,8
1818,229,45,12,8
2020,233,65,93,2
2222,535,95,93,2
2424,5
407,5
4
2727,5
437,5
4
3030,548,210,5
6
blankDIN 128 A
künftig ISO / EN
A2
Rondelles élastiques à ressorts
-
Abmessung VPE Preis €
d 2,5 1000 1,80d 3 1000 1,40d 4 1000 1,75d 5 1000 2,10d 6 1000 3,60d 8 1000 6,40d 10 1000 9,40d 12 500 13,85
Preise per 100 Stück
04 / 2019 Seite 43
Federscheiben Form A, gewölbt
Spring washers
Nennmaßd1d2h max.s
33,2
61,30,4
44,3
81,60,5
55,3101,80,5
66,4112,20,5
88,4153,40,5
1010,5
184
0,8
brüniertDIN 137 A
künftig ISO / EN
Stahl
Rondelles élastiques bombées/ondulées
-
Abmessung VPE Preis €
A 1 1000 1,65A 1,2 1000 1,65A 1,4 1000 1,65A 1,7 1000 1,65A 2 1000 0,55A 2,5 1000 0,55A 2,6 1000 0,55A 3 1000 0,55A 3,5 1000 0,70A 4 1000 0,80A 5 1000 0,95A 6 1000 1,05A 7 1000 1,35A 8 1000 1,65A 10 1000 3,20
Seite 44 04 / 2019
Preise per 100 Stück
Federscheiben Form A, gewölbt, verzinkt
Spring washers
Nennmaßd1d2h max.s
33,2
61,30,4
44,3
81,60,5
55,3101,80,5
66,4112,20,5
88,4153,40,5
1010,5
184
0,8
verz. blauDIN 137 A
künftig ISO / EN
Stahl
Rondelles élastiques bombées/ondulées
-
Abmessung VPE Preis €
A 2 1000 0,55A 2,6 1000 0,55A 3 1000 0,55A 3,5 1000 0,70A 4 1000 0,95A 5 1000 1,05A 6 1000 1,30A 7 1000 1,70A 8 1000 1,90A 10 1000 3,90A 12 1000 9,50
Preise per 100 Stück
04 / 2019 Seite 45
Federscheiben Form A, gewölbt, A2
Spring washers
Nennmaßd1d2h max.s
33,2
61,30,4
44,3
81,60,5
55,3101,80,5
66,4112,20,5
88,4153,40,5
1010,5
184
0,8
blankDIN 137 A
künftig ISO / EN
A2
Rondelles élastiques bombées/ondulées
-
Abmessung VPE Preis €
A 2,3 1000 1,75A 2,6 1000 1,75A 3 1000 0,90A 4 1000 1,30A 5 1000 1,95A 6 500 2,10A 8 500 3,70A 10 500 6,90
Seite 46 04 / 2019
Preise per 100 Stück
Federscheiben Form B, gewellt
Spring washers
Nennmaßd1d2h max.s
33,2
81,60,5
44,3
92
0,5
55,3112,20,5
66,4122,60,5
77,4143
0,8
88,4153
0,8
1010,5
214,2
1
1213245
1,2
1415285,91,6
1617306,31,6
1819346,51,6
2021367,41,6
2223407,81,8
2425448,21,8
2728509,4
2
brüniertDIN 137 B
künftig ISO / EN
Stahl
Rondelles élastiques bombées/ondulées
-
Abmessung VPE Preis €
B 3 1000 0,75B 3,5 1000 0,75B 4 1000 0,80B 5 1000 1,05B 6 1000 1,15B 7 1000 2,65B 8 1000 2,35B 10 1000 5,25B 12 500 7,95B 14 500 15,25B 16 200 16,70B 18 200 22,85B 20 100 25,80B 22 100 39,50B 24 100 51,90B 27 50 74,65B 30 50 140,15B 33 25 167,95B 36 25 216,10B 42 25 377,10B 45 25 437,65B 48 25 586,20B 52 25 677,00
Preise per 100 Stück
04 / 2019 Seite 47
Federscheiben Form B, gewellt, verzinkt
Spring washers
Nennmaßd1d2h max.s
33,2
81,60,5
44,3
92
0,5
55,3112,20,5
66,4122,60,5
77,4143
0,8
88,4153
0,8
1010,5
214,2
1
1213245
1,2
1415285,91,6
1617306,31,6
1819346,51,6
2021367,41,6
2223407,81,8
2425448,21,8
2728509,4
2
verz. blauDIN 137 B
künftig ISO / EN
Stahl
Rondelles élastiques bombées/ondulées
-
Abmessung VPE Preis €
B 3 1000 0,95B 3,5 1000 0,95B 4 1000 1,00B 5 1000 1,30B 6 1000 1,45B 7 1000 3,30B 8 1000 3,00B 10 1000 7,00B 12 500 10,65B 14 500 20,05B 16 500 22,00B 18 200 29,65B 20 100 33,10B 22 100 50,20B 24 100 63,60B 27 50 93,65B 30 50 138,75B 33 25 197,60B 36 25 260,90B 42 25 483,95B 45 25 520,15B 48 25 699,20B 52 25 802,90
Seite 48 04 / 2019
Preise per 100 Stück
Federscheiben Form B, gewellt, A2
Spring washers
Nennmaßd1d2h max.s
33,2
81,60,5
44,3
92
0,5
55,3112,20,5
66,4122,60,5
77,4143
0,8
88,4153
0,8
1010,5
214,2
1
1213245
1,2
1415285,91,6
1617306,31,6
1819346,51,6
2021367,41,6
2223407,81,8
2425448,21,8
2728509,4
2
blankDIN 137 B
künftig ISO / EN
A2
Rondelles élastiques bombées/ondulées
-
Abmessung VPE Preis €
B 3 1000 0,65B 4 1000 1,45B 5 1000 1,10B 6 500 1,20B 8 500 2,75B 10 500 11,80B 12 500 19,20B 14 500 32,90B 16 200 37,55B 20 200 59,90B 25 100 94,55
Preise per 100 Stück
04 / 2019 Seite 49
geschliffenDIN 172
künftig ISO / EN
HM-
Abmessung VPE Preis €
0,4 x 6 10 1633,500,5 x 6 10 1546,500,6 x 6 10 1546,500,7 x 6 10 1168,500,8 x 6 10 1168,500,9 x 6 10 897,000,9 x 9 10 1002,001,0 x 6 10 897,001,0 x 9 10 1002,001,1 x 6 10 570,001,1 x 9 10 648,001,2 x 6 10 570,001,2 x 9 10 648,001,3 x 6 10 570,001,3 x 9 10 648,001,4 x 6 10 570,001,4 x 9 10 648,001,5 x 6 10 570,001,5 x 9 10 648,001,6 x 6 10 570,001,6 x 9 10 648,001,7 x 6 10 570,001,7 x 9 10 648,001,8 x 6 10 570,001,8 x 9 10 648,001,9 x 6 10 433,501,9 x 9 10 465,002,0 x 6 10 433,502,0 x 9 10 465,002,1 x 6 10 433,502,1 x 9 10 465,002,2 x 6 10 433,502,2 x 9 10 465,002,3 x 6 10 433,502,3 x 9 10 465,002,4 x 6 10 433,502,4 x 9 10 465,002,5 x 6 10 433,502,5 x 9 10 465,002,6 x 6 10 433,502,6 x 9 10 465,00
Abmessung VPE Preis €
2,7 x 8 10 445,502,7 x 12 10 472,502,7 x 16 10 856,502,8 x 8 10 445,502,8 x 12 10 472,502,8 x 16 10 856,502,9 x 8 10 445,502,9 x 12 10 472,502,9 x 16 10 856,503,0 x 8 10 445,503,0 x 12 10 472,503,0 x 16 10 856,503,1 x 8 10 445,503,1 x 12 10 472,503,1 x 16 10 856,503,2 x 8 10 445,503,2 x 12 10 472,503,2 x 16 10 856,503,3 x 8 10 445,503,3 x 12 10 472,503,3 x 16 10 856,503,4 x 8 10 465,003,4 x 12 10 492,003,4 x 16 10 814,503,5 x 8 10 465,003,5 x 12 10 492,003,5 x 16 10 814,503,6 x 8 10 465,003,6 x 12 10 492,003,6 x 16 10 814,503,7 x 8 10 465,003,7 x 12 10 492,003,7 x 16 10 814,503,8 x 8 10 465,003,8 x 12 10 492,003,8 x 16 10 814,503,9 x 8 10 465,003,9 x 12 10 492,003,9 x 16 10 814,504,0 x 8 10 465,004,0 x 12 10 492,00
Abmessung VPE Preis €
4,0 x 16 10 814,504,1 x 8 10 472,504,1 x 12 10 505,504,1 x 16 10 862,504,2 x 8 10 472,504,2 x 12 10 505,504,2 x 16 10 862,504,3 x 8 10 472,504,3 x 12 10 505,504,3 x 16 10 862,504,4 x 8 10 472,504,4 x 12 10 505,504,4 x 16 10 862,504,5 x 8 10 472,504,5 x 12 10 505,504,5 x 16 10 862,504,6 x 8 10 472,504,6 x 12 10 505,504,6 x 16 10 862,504,7 x 8 10 472,504,7 x 12 10 505,504,7 x 16 10 862,504,8 x 8 10 472,504,8 x 12 10 505,504,8 x 16 10 862,504,9 x 8 10 472,504,9 x 12 10 505,504,9 x 16 10 862,505,0 x 8 10 472,505,0 x 12 10 505,505,0 x 16 10 862,505,1 x 10 10 487,505,1 x 16 10 546,005,1 x 20 10 928,505,2 x 10 10 487,505,2 x 16 10 546,005,2 x 20 10 928,505,3 x 10 10 487,505,3 x 16 10 546,005,3 x 20 10 928,505,4 x 10 10 487,50
Seite 50 04 / 2019
Preise per 100 Stück
geschliffenDIN 172
künftig ISO / EN
HM-
Abmessung VPE Preis €
5,4 x 16 10 546,005,4 x 20 10 928,505,5 x 10 10 487,505,5 x 16 10 546,005,5 x 20 10 928,505,6 x 10 10 487,505,6 x 16 10 546,005,6 x 20 10 928,505,7 x 10 10 487,505,7 x 16 10 546,005,7 x 20 10 928,505,8 x 10 10 487,505,8 x 16 10 546,005,8 x 20 10 928,505,9 x 10 10 487,505,9 x 16 10 546,005,9 x 20 10 928,506,0 x 10 10 487,506,0 x 16 10 546,006,0 x 20 10 928,506,1 x 10 10 553,506,1 x 16 10 612,006,1 x 20 10 975,006,2 x 10 10 553,506,2 x 16 10 612,006,2 x 20 10 975,006,3 x 10 10 609,006,3 x 16 10 673,506,3 x 20 10 975,006,4 x 10 10 553,506,4 x 16 10 612,006,4 x 20 10 975,006,5 x 10 10 553,506,5 x 16 10 612,006,5 x 20 10 975,006,6 x 10 10 553,506,6 x 16 10 612,006,6 x 20 10 975,006,7 x 10 10 553,506,7 x 16 10 612,006,7 x 20 10 975,00
Abmessung VPE Preis €
6,8 x 10 10 553,506,8 x 16 10 612,006,8 x 20 10 975,006,9 x 10 10 553,506,9 x 16 10 612,006,9 x 20 10 975,007,0 x 10 10 553,507,0 x 16 10 612,007,0 x 20 10 975,007,1 x 10 10 553,507,1 x 16 10 612,007,1 x 20 10 975,007,2 x 10 10 553,507,2 x 16 10 612,007,2 x 20 10 975,007,3 x 10 10 553,507,3 x 16 10 612,007,3 x 20 10 975,007,4 x 10 10 553,507,4 x 16 10 612,007,4 x 20 10 975,007,5 x 10 10 553,507,5 x 16 10 612,007,5 x 20 10 975,007,6 x 10 10 553,507,6 x 16 10 612,007,6 x 20 10 975,007,7 x 10 10 553,507,7 x 16 10 612,007,7 x 20 10 975,007,8 x 10 10 553,507,8 x 16 10 612,007,8 x 20 10 975,007,9 x 10 10 553,507,9 x 16 10 612,007,9 x 20 10 975,008,0 x 10 10 553,508,0 x 16 10 612,008,0 x 20 10 975,008,1 x 12 10 612,008,1 x 20 10 679,50
Abmessung VPE Preis €
8,1 x 25 10 1095,008,2 x 12 10 612,008,2 x 20 10 679,508,2 x 25 10 1095,008,3 x 12 10 612,008,3 x 20 10 679,508,3 x 25 10 1095,008,4 x 12 10 612,008,4 x 20 10 679,508,4 x 25 10 1095,008,5 x 12 10 612,008,5 x 20 10 679,508,5 x 25 10 1095,008,6 x 12 10 612,008,6 x 20 10 679,508,6 x 25 10 1095,008,7 x 12 10 612,008,7 x 20 10 679,508,7 x 25 10 1095,008,8 x 12 10 612,008,8 x 20 10 679,508,8 x 25 10 1095,008,9 x 12 10 612,008,9 x 20 10 679,508,9 x 25 10 1095,009,0 x 12 10 612,009,0 x 20 10 679,509,0 x 25 10 1095,009,1 x 12 10 612,009,1 x 20 10 679,509,1 x 25 10 1095,009,2 x 12 10 612,009,2 x 20 10 679,509,2 x 25 10 1095,009,3 x 12 10 612,009,3 x 20 10 679,509,3 x 25 10 1095,009,4 x 12 10 612,009,4 x 20 10 679,509,4 x 25 10 964,509,5 x 12 10 612,00
Preise per 100 Stück
04 / 2019 Seite 51
geschliffenDIN 172
künftig ISO / EN
HM-
Abmessung VPE Preis €
9,5 x 20 10 679,509,5 x 25 10 1095,009,6 x 12 10 612,009,6 x 20 10 679,509,6 x 25 10 1095,009,7 x 12 10 612,009,7 x 20 10 679,509,7 x 25 10 1095,009,8 x 12 10 612,009,8 x 20 10 679,509,8 x 25 10 1095,009,9 x 12 10 612,009,9 x 20 10 679,509,9 x 25 10 964,5010,0 x 12 10 612,0010,0 x 20 10 679,5010,0 x 25 10 1095,0010,1 x 12 10 679,5010,1 x 20 10 744,0010,1 x 25 10 1215,0010,2 x 12 10 679,5010,2 x 20 10 744,0010,2 x 25 10 1215,0010,3 x 12 10 679,5010,3 x 20 10 744,0010,3 x 25 10 1215,0010,4 x 12 10 679,5010,4 x 20 10 744,0010,4 x 25 10 1215,0010,5 x 12 10 679,5010,5 x 20 10 744,0010,5 x 25 10 1215,0010,6 x 12 10 679,5010,6 x 20 10 744,0010,6 x 25 10 1215,0010,7 x 12 10 679,5010,7 x 20 10 744,0010,7 x 25 10 1215,0010,8 x 12 10 679,5010,8 x 20 10 744,0010,8 x 25 10 1215,00
Abmessung VPE Preis €
10,9 x 12 10 679,5010,9 x 20 10 679,5010,9 x 25 10 1215,0011,0 x 12 10 679,5011,0 x 20 10 744,0011,0 x 25 10 1215,0011,1 x 12 10 679,5011,1 x 20 10 744,0011,1 x 25 10 1215,0011,2 x 12 10 679,5011,2 x 20 10 744,0011,2 x 25 10 1215,0011,3 x 12 10 679,5011,3 x 20 10 744,0011,3 x 25 10 1215,0011,4 x 12 10 679,5011,4 x 20 10 744,0011,4 x 25 10 1215,0011,5 x 12 10 679,5011,5 x 20 10 744,0011,5 x 25 10 1215,0011,6 x 12 10 679,5011,6 x 20 10 744,0011,6 x 25 10 1215,0011,7 x 12 10 679,5011,7 x 20 10 744,0011,7 x 25 10 1215,0011,8 x 12 10 679,5011,8 x 20 10 744,0011,8 x 25 10 1215,0011,9 x 12 10 679,5011,9 x 20 10 744,0011,9 x 25 10 1215,0012,0 x 12 10 679,5012,0 x 20 10 744,0012,0 x 25 10 1215,0012,1 x 16 10 786,0012,1 x 28 10 1047,0012,1 x 36 10 1609,5012,2 x 16 10 786,0012,2 x 28 10 1047,00
Abmessung VPE Preis €
12,2 x 36 10 1609,5012,3 x 16 10 786,0012,3 x 28 10 1047,0012,3 x 36 10 1609,5012,4 x 16 10 786,0012,4 x 28 10 1047,0012,4 x 36 10 1609,5012,5 x 16 10 786,0012,5 x 28 10 1047,0012,5 x 36 10 1609,5012,6 x 16 10 786,0012,6 x 28 10 1047,0012,6 x 36 10 1609,5012,7 x 16 10 786,0012,7 x 28 10 1047,0012,7 x 36 10 1609,5012,8 x 16 10 786,0012,8 x 28 10 1047,0012,8 x 36 10 1609,5012,9 x 16 10 786,0012,9 x 28 10 1047,0012,9 x 36 10 1609,5013,0 x 16 10 786,0013,0 x 28 10 1047,0013,0 x 36 10 1609,5013,1 x 16 10 786,0013,1 x 28 10 1047,0013,1 x 36 10 1609,5013,2 x 16 10 786,0013,2 x 28 10 1047,0013,2 x 36 10 1609,5013,3 x 16 10 786,0013,3 x 28 10 1047,0013,3 x 36 10 1609,5013,4 x 16 10 786,0013,4 x 28 10 1047,0013,4 x 36 10 1609,5013,5 x 16 10 786,0013,5 x 28 10 1047,0013,5 x 36 10 1609,5013,6 x 16 10 786,00
Seite 52 04 / 2019
Preise per 100 Stück
geschliffenDIN 172
künftig ISO / EN
HM-
Abmessung VPE Preis €
13,6 x 28 10 1047,0013,6 x 36 10 1609,5013,7 x 16 10 786,0013,7 x 28 10 1047,0013,7 x 36 10 1609,5013,8 x 16 10 786,0013,8 x 28 10 1047,0013,8 x 36 10 1609,5013,9 x 16 10 786,0013,9 x 28 10 1047,0013,9 x 36 10 1609,5014,0 x 16 10 786,0014,0 x 28 10 1047,0014,0 x 36 10 1609,5014,1 x 16 10 786,0014,1 x 28 10 1047,0014,1 x 36 10 1609,5014,2 x 16 10 786,0014,2 x 28 10 1047,0014,2 x 36 10 1609,5014,3 x 16 10 786,0014,3 x 28 10 1047,0014,3 x 36 10 1609,5014,4 x 16 10 786,0014,4 x 28 10 1047,0014,4 x 36 10 1609,5014,5 x 16 10 786,0014,5 x 28 10 1047,0014,5 x 36 10 1609,5014,6 x 16 10 786,0014,6 x 28 10 1047,0014,6 x 36 10 1609,5014,7 x 16 10 786,0014,7 x 28 10 1047,0014,7 x 36 10 1609,5014,8 x 16 10 786,0014,8 x 28 10 1047,0014,8 x 36 10 1609,5014,9 x 16 10 786,0014,9 x 28 10 1047,0014,9 x 36 10 1609,50
Abmessung VPE Preis €
15,0 x 16 10 786,0015,0 x 28 10 1047,0015,0 x 36 10 1609,5015,5 x 16 10 937,5015,5 x 28 10 1254,0015,5 x 36 10 1729,5016,0 x 16 10 937,5016,0 x 28 10 1254,0016,0 x 36 10 1729,5016,5 x 16 10 937,5016,5 x 28 10 1254,0016,5 x 36 10 1729,5017,0 x 16 10 937,5017,0 x 28 10 1254,0017,0 x 36 10 1729,5017,5 x 16 10 937,5017,5 x 28 10 1254,0017,5 x 36 10 1729,5018,0 x 16 10 937,5018,0 x 28 10 1254,0018,0 x 36 10 1729,5018,5 x 20 10 1254,0018,5 x 36 10 1660,5018,5 x 45 10 2338,5019,0 x 20 10 1254,0019,0 x 36 10 1660,5019,0 x 45 10 2338,5019,5 x 20 10 1254,0019,5 x 36 10 1660,5019,5 x 45 10 2338,5020,0 x 20 10 1254,0020,0 x 36 10 1660,5020,0 x 45 10 2338,5020,5 x 20 10 1254,0020,5 x 36 10 1660,5020,5 x 45 10 2338,5021,0 x 20 10 1254,0021,0 x 36 10 1660,5021,0 x 45 10 2338,5021,5 x 20 10 1254,0021,5 x 36 10 1660,50
Abmessung VPE Preis €
21,5 x 45 10 2338,5022,0 x 20 10 1254,0022,0 x 36 10 1660,5022,0 x 45 10 2338,5022,5 x 20 10 1578,0022,5 x 36 10 2017,5022,5 x 45 10 2793,0023,0 x 20 10 1578,0023,0 x 36 10 2017,5023,0 x 45 10 2793,0023,5 x 20 10 1578,0023,5 x 36 10 2017,5023,5 x 45 10 2793,0024,0 x 20 10 1578,0024,0 x 36 10 2017,5024,0 x 45 10 2793,0024,5 x 20 10 1578,0024,5 x 36 10 2017,5024,5 x 45 10 2793,0025,0 x 20 10 1578,0025,0 x 36 10 2017,5025,0 x 45 10 2793,0025,5 x 20 10 1578,0025,5 x 36 10 2017,5025,5 x 45 10 2793,0026,0 x 20 10 1578,0026,0 x 36 10 2017,5026,0 x 45 10 2793,0026,5 x 25 10 2208,0026,5 x 45 10 2572,5026,5 x 56 10 4786,5027,0 x 25 10 2208,0027,0 x 45 10 2572,5027,0 x 56 10 4786,5027,5 x 25 10 2208,0027,5 x 45 10 2572,5027,5 x 56 10 4786,5028,0 x 25 10 2208,0028,0 x 45 10 2572,5028,0 x 56 10 4786,5028,5 x 25 10 2208,00
Preise per 100 Stück
04 / 2019 Seite 53
geschliffenDIN 172
künftig ISO / EN
HM-
Abmessung VPE Preis €
28,5 x 45 10 2572,5028,5 x 56 10 4786,5029,0 x 25 10 1942,5029,0 x 45 10 2263,5029,0 x 56 10 4786,5029,5 x 25 10 2208,0029,5 x 45 10 2572,5029,5 x 56 10 4786,5030,0 x 25 10 2208,0030,0 x 45 10 2572,5030,0 x 56 10 4786,5030,5 x 25 10 2491,5030,5 x 45 10 3132,0030,5 x 56 10 5356,5031,0 x 25 10 2491,5031,0 x 45 10 3132,0031,0 x 56 10 6087,0031,5 x 25 10 2491,5031,5 x 45 10 3132,0031,5 x 56 10 6087,0032,0 x 25 10 2491,5032,0 x 45 10 3132,0032,0 x 56 10 6087,0032,5 x 25 10 2491,5032,5 x 45 10 3132,0032,5 x 56 10 6087,0033,0 x 25 10 2491,5033,0 x 45 10 3132,0033,0 x 56 10 6087,0033,5 x 25 10 2491,5033,5 x 45 10 3132,0033,5 x 56 10 6087,0034,0 x 25 10 2491,5034,0 x 45 10 3132,0034,0 x 56 10 6087,0034,5 x 25 10 2491,5034,5 x 45 10 3132,0034,5 x 56 10 6087,0035,0 x 25 10 2491,5035,0 x 45 10 3132,0035,0 x 56 10 6087,00
Abmessung VPE Preis €
35,5 x 30 10 3715,5035,5 x 56 10 4885,5035,5 x 67 10 8563,5036,0 x 30 10 3715,5036,0 x 56 10 4885,5036,0 x 67 10 8563,5036,5 x 30 10 3715,5036,5 x 56 10 4300,5036,5 x 67 10 8563,5037,0 x 30 10 3715,5037,0 x 56 10 4885,5037,0 x 67 10 8563,5037,5 x 30 10 3715,5037,5 x 56 10 4885,5037,5 x 67 10 8563,5038,0 x 30 10 3715,5038,0 x 56 10 4885,5038,0 x 67 10 8563,5038,5 x 30 10 3715,5038,5 x 56 10 4885,5038,5 x 67 10 8563,5039,0 x 30 10 3715,5039,0 x 56 10 4885,5039,0 x 67 10 8563,5039,5 x 30 10 3715,5039,5 x 56 10 4885,5039,5 x 67 10 8563,5040,0 x 30 10 3715,5040,0 x 56 10 4885,5040,0 x 67 10 8563,5040,5 x 30 10 3715,5040,5 x 56 10 4885,5040,5 x 67 10 8563,5041,0 x 30 10 3715,5041,0 x 56 10 4885,5041,0 x 67 10 8563,5041,5 x 30 10 3715,5041,5 x 56 10 4885,5041,5 x 67 10 8563,5042,0 x 30 10 3715,5042,0 x 56 10 4885,50
Abmessung VPE Preis €
42,0 x 67 10 8563,50
Seite 54 04 / 2019
Preise per 100 Stück
geschliffenDIN 179
künftig ISO / EN
HM-
Abmessung VPE Preis €
0,4 x 6 10 1518,000,5 x 6 10 1228,500,6 x 6 10 1228,500,7 x 6 10 891,000,8 x 6 10 891,000,9 x 6 10 651,000,9 x 9 10 789,001,0 x 6 10 651,001,0 x 9 10 789,001,1 x 6 10 405,001,1 x 9 10 465,001,2 x 6 10 405,001,2 x 9 10 465,001,3 x 6 10 405,001,3 x 9 10 465,001,4 x 6 10 405,001,4 x 9 10 465,001,5 x 6 10 405,001,5 x 9 10 465,001,6 x 6 10 405,001,6 x 9 10 465,001,7 x 6 10 405,001,7 x 9 10 465,001,8 x 6 10 405,001,8 x 9 10 465,001,9 x 6 10 298,501,9 x 9 10 349,502,0 x 6 10 298,502,0 x 9 10 349,502,1 x 6 10 298,502,1 x 9 10 349,502,2 x 6 10 298,502,2 x 9 10 349,502,3 x 6 10 298,502,3 x 9 10 349,502,4 x 6 10 298,502,4 x 9 10 349,502,5 x 6 10 298,502,5 x 9 10 307,502,6 x 6 10 298,502,6 x 9 10 349,50
Abmessung VPE Preis €
2,7 x 8 10 328,502,7 x 12 10 352,502,7 x 16 10 568,502,8 x 8 10 328,502,8 x 12 10 352,502,8 x 16 10 568,502,9 x 8 10 328,502,9 x 12 10 352,502,9 x 16 10 568,503,0 x 8 10 328,503,0 x 12 10 352,503,0 x 16 10 568,503,1 x 8 10 328,503,1 x 12 10 352,503,1 x 16 10 568,503,2 x 8 10 328,503,2 x 12 10 352,503,2 x 16 10 568,503,3 x 8 10 328,503,3 x 12 10 352,503,3 x 16 10 568,503,4 x 8 10 336,003,4 x 12 10 366,003,4 x 16 10 564,003,5 x 8 10 336,003,5 x 12 10 366,003,5 x 16 10 564,003,6 x 8 10 336,003,6 x 12 10 366,003,6 x 16 10 564,003,7 x 8 10 336,003,7 x 12 10 366,003,7 x 16 10 564,003,8 x 8 10 336,003,8 x 12 10 366,003,8 x 16 10 564,003,9 x 8 10 336,003,9 x 12 10 366,003,9 x 16 10 564,004,0 x 8 10 336,004,0 x 12 10 366,00
Abmessung VPE Preis €
4,0 x 16 10 564,004,1 x 8 10 363,004,1 x 12 10 396,004,1 x 16 10 568,504,2 x 8 10 363,004,2 x 12 10 396,004,2 x 16 10 568,504,3 x 8 10 363,004,3 x 12 10 396,004,3 x 16 10 568,504,4 x 8 10 363,004,4 x 12 10 396,004,4 x 16 10 568,504,5 x 8 10 363,004,5 x 12 10 396,004,5 x 16 10 568,504,6 x 8 10 363,004,6 x 12 10 396,004,6 x 16 10 568,504,7 x 8 10 363,004,7 x 12 10 396,004,7 x 16 10 568,504,8 x 8 10 363,004,8 x 12 10 396,004,8 x 16 10 568,504,9 x 8 10 363,004,9 x 12 10 396,004,9 x 16 10 568,505,0 x 8 10 363,005,0 x 12 10 396,005,0 x 16 10 568,505,1 x 10 10 378,005,1 x 16 10 427,505,1 x 20 10 652,505,2 x 10 10 378,005,2 x 16 10 427,505,2 x 20 10 652,505,3 x 10 10 378,005,3 x 16 10 427,505,3 x 20 10 652,505,4 x 10 10 378,00
Preise per 100 Stück
04 / 2019 Seite 55
geschliffenDIN 179
künftig ISO / EN
HM-
Abmessung VPE Preis €
5,4 x 16 10 427,505,4 x 20 10 652,505,5 x 10 10 378,005,5 x 16 10 427,505,5 x 20 10 652,505,6 x 10 10 378,005,6 x 16 10 427,505,6 x 20 10 652,505,7 x 10 10 378,005,7 x 16 10 427,505,7 x 20 10 652,505,8 x 10 10 378,005,8 x 16 10 427,505,8 x 20 10 652,505,9 x 10 10 378,005,9 x 16 10 427,505,9 x 20 10 652,506,0 x 10 10 378,006,0 x 16 10 427,506,0 x 20 10 652,506,1 x 10 10 408,006,1 x 16 10 465,006,1 x 20 10 684,006,2 x 10 10 408,006,2 x 16 10 465,006,2 x 20 10 684,006,3 x 10 10 408,006,3 x 16 10 465,006,3 x 20 10 684,006,4 x 10 10 408,006,4 x 16 10 465,006,4 x 20 10 684,006,5 x 10 10 408,006,5 x 16 10 465,006,5 x 20 10 684,006,6 x 10 10 408,006,6 x 16 10 465,006,6 x 20 10 684,006,7 x 10 10 408,006,7 x 16 10 465,006,7 x 20 10 684,00
Abmessung VPE Preis €
6,8 x 10 10 408,006,8 x 16 10 465,006,8 x 20 10 684,006,9 x 10 10 408,006,9 x 16 10 465,006,9 x 20 10 684,007,0 x 10 10 408,007,0 x 16 10 465,007,0 x 20 10 684,007,1 x 10 10 408,007,1 x 16 10 465,007,1 x 20 10 684,007,2 x 10 10 408,007,2 x 16 10 465,007,2 x 20 10 684,007,3 x 10 10 408,007,3 x 16 10 465,007,3 x 20 10 684,007,4 x 10 10 408,007,4 x 16 10 465,007,4 x 20 10 684,007,5 x 10 10 408,007,5 x 16 10 465,007,5 x 20 10 684,007,6 x 10 10 408,007,6 x 16 10 465,007,6 x 20 10 684,007,7 x 10 10 408,007,7 x 16 10 465,007,7 x 20 10 684,007,8 x 10 10 408,007,8 x 16 10 465,007,8 x 20 10 684,007,9 x 10 10 408,007,9 x 16 10 465,007,9 x 20 10 684,008,0 x 10 10 408,008,0 x 16 10 465,008,0 x 20 10 684,008,1 x 12 10 465,008,1 x 20 10 528,00
Abmessung VPE Preis €
8,1 x 25 10 784,508,2 x 12 10 465,008,2 x 20 10 528,008,2 x 25 10 784,508,3 x 12 10 465,008,3 x 20 10 528,008,3 x 25 10 784,508,4 x 12 10 465,008,4 x 20 10 528,008,4 x 25 10 784,508,5 x 12 10 465,008,5 x 20 10 528,008,5 x 25 10 784,508,6 x 12 10 465,008,6 x 20 10 528,008,6 x 25 10 784,508,7 x 12 10 465,008,7 x 20 10 528,008,7 x 25 10 784,508,8 x 12 10 465,008,8 x 20 10 528,008,8 x 25 10 784,508,9 x 12 10 465,008,9 x 20 10 528,008,9 x 25 10 784,509,0 x 12 10 465,009,0 x 20 10 528,009,0 x 25 10 784,509,1 x 12 10 465,009,1 x 20 10 528,009,1 x 25 10 784,509,2 x 12 10 465,009,2 x 20 10 528,009,2 x 25 10 784,509,3 x 12 10 465,009,3 x 20 10 528,009,3 x 25 10 784,509,4 x 12 10 465,009,4 x 20 10 528,009,4 x 25 10 784,509,5 x 12 10 465,00
Seite 56 04 / 2019
Preise per 100 Stück
geschliffenDIN 179
künftig ISO / EN
HM-
Abmessung VPE Preis €
9,5 x 20 10 528,009,5 x 25 10 784,509,6 x 12 10 465,009,6 x 20 10 528,009,6 x 25 10 784,509,7 x 12 10 465,009,7 x 20 10 528,009,7 x 25 10 784,509,8 x 12 10 465,009,8 x 20 10 528,009,8 x 25 10 784,509,9 x 12 10 465,009,9 x 20 10 528,009,9 x 25 10 784,5010,0 x 12 10 465,0010,0 x 20 10 528,0010,0 x 25 10 784,5010,1 x 12 10 528,0010,1 x 20 10 612,0010,1 x 25 10 838,5010,2 x 12 10 528,0010,2 x 20 10 612,0010,2 x 25 10 838,5010,3 x 12 10 528,0010,3 x 20 10 612,0010,3 x 25 10 838,5010,4 x 12 10 528,0010,4 x 20 10 612,0010,4 x 25 10 838,5010,5 x 12 10 528,0010,5 x 20 10 612,0010,5 x 25 10 838,5010,6 x 12 10 528,0010,6 x 20 10 612,0010,6 x 25 10 838,5010,7 x 12 10 528,0010,7 x 20 10 612,0010,7 x 25 10 838,5010,8 x 12 10 528,0010,8 x 20 10 612,0010,8 x 25 10 838,50
Abmessung VPE Preis €
10,9 x 12 10 465,0010,9 x 20 10 538,5010,9 x 25 10 838,5011,0 x 12 10 528,0011,0 x 20 10 612,0011,0 x 25 10 838,5011,1 x 12 10 528,0011,1 x 20 10 612,0011,1 x 25 10 838,5011,2 x 12 10 528,0011,2 x 20 10 612,0011,2 x 25 10 838,5011,3 x 12 10 528,0011,3 x 20 10 612,0011,3 x 25 10 838,5011,4 x 12 10 528,0011,4 x 20 10 612,0011,4 x 25 10 838,5011,5 x 12 10 528,0011,5 x 20 10 612,0011,5 x 25 10 838,5011,6 x 12 10 528,0011,6 x 20 10 612,0011,6 x 25 10 838,5011,7 x 12 10 528,0011,7 x 20 10 612,0011,7 x 25 10 838,5011,8 x 12 10 528,0011,8 x 20 10 612,0011,8 x 25 10 838,5011,9 x 12 10 528,0011,9 x 20 10 612,0011,9 x 25 10 838,5012,0 x 12 10 528,0012,0 x 20 10 612,0012,0 x 25 10 838,5012,1 x 16 10 567,0012,1 x 28 10 760,5012,1 x 36 10 1086,0012,2 x 16 10 567,0012,2 x 28 10 760,50
Abmessung VPE Preis €
12,2 x 36 10 1086,0012,3 x 16 10 567,0012,3 x 28 10 760,5012,3 x 36 10 1086,0012,4 x 16 10 567,0012,4 x 28 10 760,5012,4 x 36 10 1086,0012,5 x 16 10 567,0012,5 x 28 10 760,5012,5 x 36 10 1086,0012,6 x 16 10 567,0012,6 x 28 10 760,5012,6 x 36 10 1086,0012,7 x 16 10 567,0012,7 x 28 10 760,5012,7 x 36 10 1086,0012,8 x 16 10 567,0012,8 x 28 10 760,5012,8 x 36 10 1086,0012,9 x 16 10 567,0012,9 x 28 10 760,5012,9 x 36 10 1086,0013,0 x 16 10 567,0013,0 x 28 10 760,5013,0 x 36 10 1086,0013,1 x 16 10 567,0013,1 x 28 10 760,5013,1 x 36 10 1086,0013,2 x 16 10 567,0013,2 x 28 10 760,5013,2 x 36 10 1086,0013,3 x 16 10 567,0013,3 x 28 10 760,5013,3 x 36 10 1086,0013,4 x 16 10 567,0013,4 x 28 10 760,5013,4 x 36 10 1086,0013,5 x 16 10 567,0013,5 x 28 10 760,5013,5 x 36 10 1086,0013,6 x 16 10 567,00
Preise per 100 Stück
04 / 2019 Seite 57
geschliffenDIN 179
künftig ISO / EN
HM-
Abmessung VPE Preis €
13,6 x 28 10 760,5013,6 x 36 10 1086,0013,7 x 16 10 567,0013,7 x 28 10 760,5013,7 x 36 10 1086,0013,8 x 16 10 567,0013,8 x 28 10 760,5013,8 x 36 10 1086,0013,9 x 16 10 567,0013,9 x 28 10 669,0013,9 x 36 10 1086,0014,0 x 16 10 567,0014,0 x 28 10 760,5014,0 x 36 10 1086,0014,1 x 16 10 567,0014,1 x 28 10 760,5014,1 x 36 10 1086,0014,2 x 16 10 567,0014,2 x 28 10 760,5014,2 x 36 10 1086,0014,3 x 16 10 567,0014,3 x 28 10 760,5014,3 x 36 10 1086,0014,4 x 16 10 567,0014,4 x 28 10 760,5014,4 x 36 10 1086,0014,5 x 16 10 567,0014,5 x 28 10 760,5014,5 x 36 10 1086,0014,6 x 16 10 567,0014,6 x 28 10 760,5014,6 x 36 10 955,5014,7 x 16 10 567,0014,7 x 28 10 760,5014,7 x 36 10 1086,0014,8 x 16 10 567,0014,8 x 28 10 760,5014,8 x 36 10 1086,0014,9 x 16 10 567,0014,9 x 28 10 760,5014,9 x 36 10 1086,00
Abmessung VPE Preis €
15,0 x 16 10 567,0015,0 x 28 10 760,5015,0 x 36 10 1086,0015,5 x 16 10 717,0015,5 x 28 10 937,5015,5 x 36 10 1249,5015,7 x 16 10 631,5016,0 x 16 10 717,0016,0 x 28 10 937,5016,0 x 36 10 1249,5016,5 x 16 10 717,0016,5 x 28 10 937,5016,5 x 36 10 1249,5017,0 x 16 10 717,0017,0 x 28 10 937,5017,0 x 36 10 1249,5017,5 x 16 10 717,0017,5 x 28 10 937,5017,5 x 36 10 1249,5018,0 x 16 10 717,0018,0 x 28 10 937,5018,0 x 36 10 1249,5018,5 x 20 10 937,5018,5 x 36 10 1177,5018,5 x 45 10 1974,0019,0 x 20 10 937,5019,0 x 36 10 1177,5019,0 x 45 10 1974,0019,5 x 20 10 937,5019,5 x 36 10 1177,5019,5 x 45 10 1974,0020,0 x 20 10 937,5020,0 x 36 10 1177,5020,0 x 45 10 1974,0020,5 x 20 10 937,5020,5 x 36 10 1177,5020,5 x 45 10 1974,0021,0 x 20 10 937,5021,0 x 36 10 1177,5021,0 x 45 10 1974,0021,5 x 20 10 937,50
Abmessung VPE Preis €
21,5 x 36 10 1177,5021,5 x 45 10 1974,0022,0 x 20 10 937,5022,0 x 36 10 1177,5022,0 x 45 10 1974,0022,5 x 20 10 1092,0022,5 x 36 10 1381,5022,5 x 45 10 2118,0023,0 x 20 10 1092,0023,0 x 36 10 1381,5023,0 x 45 10 2118,0023,5 x 20 10 1092,0023,5 x 36 10 1381,5023,5 x 45 10 2118,0024,0 x 20 10 1092,0024,0 x 36 10 1381,5024,0 x 45 10 2118,0024,5 x 20 10 1092,0024,5 x 36 10 1381,5024,5 x 45 10 2118,0025,0 x 20 10 1092,0025,0 x 36 10 1381,5025,0 x 45 10 2118,0025,5 x 20 10 1092,0025,5 x 36 10 1381,5025,5 x 45 10 2118,0026,0 x 20 10 1092,0026,0 x 36 10 1381,5026,0 x 45 10 2118,0026,5 x 25 10 1506,0026,5 x 45 10 1855,5026,5 x 56 10 2428,5027,0 x 25 10 1506,0027,0 x 45 10 1855,5027,0 x 56 10 2428,5027,5 x 25 10 1506,0027,5 x 45 10 1855,5027,5 x 56 10 2428,5028,0 x 25 10 1506,0028,0 x 45 10 1855,5028,0 x 56 10 2428,50
Seite 58 04 / 2019
Preise per 100 Stück
geschliffenDIN 179
künftig ISO / EN
HM-
Abmessung VPE Preis €
28,5 x 25 10 1506,0028,5 x 45 10 1855,5028,5 x 56 10 2428,5029,0 x 25 10 1506,0029,0 x 45 10 1855,5029,0 x 56 10 2428,5029,5 x 25 10 1506,0029,5 x 45 10 1855,5029,5 x 56 10 2428,5030,0 x 25 10 1506,0030,0 x 45 10 1855,5030,0 x 56 10 2428,5030,5 x 25 10 1690,5030,5 x 45 10 2206,5030,5 x 56 10 4942,5031,0 x 25 10 1690,5031,0 x 45 10 2206,5031,0 x 56 10 4942,5031,5 x 25 10 1690,5031,5 x 45 10 2206,5031,5 x 56 10 4942,5032,0 x 25 10 1690,5032,0 x 45 10 2206,5032,0 x 56 10 4942,5032,5 x 25 10 1690,5032,5 x 45 10 2206,5032,5 x 56 10 4942,5033,0 x 25 10 1690,5033,0 x 45 10 2206,5033,0 x 56 10 4942,5033,5 x 25 10 1690,5033,5 x 45 10 2206,5033,5 x 56 10 4942,5034,0 x 25 10 1690,5034,0 x 45 10 2206,5034,0 x 56 10 4942,5034,5 x 25 10 1486,5034,5 x 45 10 2206,5034,5 x 56 10 4942,5035,0 x 25 10 1690,5035,0 x 45 10 2206,50
Abmessung VPE Preis €
35,0 x 56 10 4942,5035,5 x 30 10 2716,5035,5 x 56 10 3934,5035,5 x 67 10 6868,5036,0 x 30 10 2716,5036,0 x 56 10 3934,5036,0 x 67 10 6868,5036,5 x 30 10 2716,5036,5 x 56 10 3934,5036,5 x 67 10 6868,5037,0 x 30 10 2716,5037,0 x 56 10 3934,5037,0 x 67 10 6868,5037,5 x 30 10 2716,5037,5 x 56 10 3934,5037,5 x 67 10 6868,5038,0 x 30 10 2716,5038,0 x 56 10 3934,5038,0 x 67 10 6868,5038,5 x 30 10 2716,5038,5 x 56 10 3934,5038,5 x 67 10 6868,5039,0 x 30 10 2716,5039,0 x 56 10 3934,5039,0 x 67 10 6868,5039,5 x 30 10 2716,5039,5 x 56 10 3934,5039,5 x 67 10 6868,5040,0 x 30 10 2716,5040,0 x 56 10 3934,5040,0 x 67 10 6868,5040,5 x 30 10 2716,5040,5 x 56 10 3934,5040,5 x 67 10 6868,5041,0 x 30 10 2716,5041,0 x 56 10 3934,5041,0 x 67 10 6868,5041,5 x 30 10 2716,5041,5 x 56 10 3934,5041,5 x 67 10 6868,5042,0 x 30 10 2716,50
Abmessung VPE Preis €
42,0 x 56 10 3934,50
Preise per 100 Stück
04 / 2019 Seite 59
Flügelmuttern, verzinkt
Wing nuts
d1d2 max.e max.h max.m max.
M 48
2010,54,6
M 51126136,5
M 61333178
M 816392010
M 1020512512
M 122365
33,514
M 162973
37,517
M 203590
46,521
M 2444
11056,5
25
verz. blauDIN 315
künftig ISO / EN
Stahl
Écrous à oreilles
-
Abmessung VPE Preis €
4 500 31,605 500 33,956 200 44,508 100 61,2510 100 112,7012 50 232,0514 50 294,8516 20 458,2520 10 1473,40
Seite 60 04 / 2019
Preise per 100 Stück
Flügelmuttern, amerikanische Form, A2
Wing nuts
d1d2 max.e max.h max.m max.
M 48
2010,54,6
M 51126136,5
M 61333178
M 816392010
M 1020512512
M 122365
33,514
M 162973
37,517
M 203590
46,521
M 2444
11056,5
25
blankDIN 315
künftig ISO / EN
A2
Écrous à oreilles
-
Abmessung VPE Preis €
3 100 12,904 100 13,805 100 13,956 100 17,808 100 25,9010 100 45,0012 50 104,0016 10 383,8520 10 597,00
Preise per 100 Stück
04 / 2019 Seite 61
Flügelschrauben, verzinkt
Wing screws
d1d2 max.e max.h max.m max.
M 48
2010,54,6
M 51126136,5
M 61333178
M 816392010
M 1020512512
M 122365
33,514
verz. blauDIN 316
künftig ISO / EN
Stahl
Vis à oreilles
-
Abmessung VPE Preis €
4 x 8 200 78,404 x 10 200 79,954 x 16 200 76,654 x 20 200 73,104 x 25 200 81,905 x 8 200 57,505 x 10 200 81,505 x 16 200 79,955 x 20 200 83,855 x 25 200 88,155 x 30 100 89,705 x 40 100 92,356 x 10 200 92,056 x 16 100 92,806 x 20 100 94,756 x 25 100 92,106 x 30 100 97,356 x 40 100 99,856 x 50 100 102,958 x 10 100 114,258 x 16 100 106,858 x 20 100 106,108 x 25 100 104,508 x 30 100 116,408 x 35 100 124,408 x 40 50 132,608 x 50 50 152,908 x 60 50 159,508 x 70 50 161,058 x 80 50 188,0010 x 16 50 181,7510 x 20 50 184,4510 x 25 50 188,7510 x 30 50 191,6510 x 40 50 201,2510 x 50 20 232,0510 x 60 20 237,1012 x 20 20 392,7512 x 30 20 407,95
Seite 62 04 / 2019
Preise per 100 Stück
Flügelschrauben A2
Wing screws
d1d2 max.e max.h max.m max.
M 48
2010,54,6
M 51126136,5
M 61333178
M 816392010
M 1020512512
M 122365
33,514
blankDIN 316
künftig ISO / EN
A2
Vis à oreilles
-
Abmessung VPE Preis €
3 x 10 100 27,453 x 20 100 27,454 x 16 100 59,005 x 10 50 60,005 x 16 50 62,405 x 20 50 64,455 x 25 50 67,355 x 30 50 68,356 x 12 50 38,406 x 20 50 79,556 x 25 50 82,206 x 30 50 85,306 x 35 50 88,456 x 40 50 105,006 x 45 50 113,756 x 50 50 113,758 x 10 50 50,658 x 12 50 51,008 x 16 50 51,058 x 20 50 52,108 x 25 50 53,908 x 30 50 78,808 x 40 50 60,00
Preise per 100 Stück
04 / 2019 Seite 63
HSS-Spiralbohrer, Typ N ECO 180
HSS twist drill type N
dGesamtlängeSpirallänge
0,5226
0,6247
0,7289
0,83010
0,93211
1,03412
1,13614
1,23816
1,253816
1,33816
1,44018
1,54018
1,64320
1,74320
1,754622
geschliffenDIN 338
künftig ISO / EN
HSS
Meches HSS, type N
-
Abmessung VPE Preis €
1 10 0,621,1 10 0,621,2 10 0,621,3 10 0,621,4 10 0,621,5 10 0,621,6 10 0,651,7 10 0,651,8 10 0,651,9 10 0,652 10 0,542,1 10 0,692,2 10 0,692,3 10 0,692,4 10 0,692,5 10 0,692,6 10 0,932,7 10 0,932,8 10 0,932,9 10 0,933 10 0,933,1 10 1,033,2 10 1,033,3 10 1,033,4 10 1,033,5 10 1,033,6 10 1,173,7 10 1,173,8 10 4,793,9 10 6,094 10 1,174,1 10 1,454,2 10 1,454,3 10 1,454,4 10 1,454,5 10 1,454,6 10 1,764,7 10 1,764,8 10 1,764,9 10 1,765 10 1,76
Abmessung VPE Preis €
5,1 10 2,295,2 10 2,295,3 10 2,295,4 10 2,295,5 10 2,295,6 10 2,595,7 10 2,595,8 10 2,595,9 10 2,596 10 2,516,1 10 2,816,2 10 2,816,3 10 2,816,4 10 2,816,5 10 2,816,6 10 3,376,7 10 3,376,8 10 3,376,9 10 3,377 10 3,377,1 10 3,897,2 10 3,897,3 10 3,897,4 10 3,897,5 10 3,897,6 10 4,797,7 10 4,797,8 10 4,797,9 10 4,798 10 4,798,1 10 5,138,2 10 5,138,3 10 5,138,4 10 5,138,5 10 5,138,6 5 6,098,7 5 6,098,8 5 6,098,9 5 6,099 5 6,099,1 5 6,65
Abmessung VPE Preis €
9,2 5 6,659,3 5 6,659,4 5 6,659,5 5 6,659,6 5 7,699,7 5 7,699,8 5 7,699,9 5 7,6910 5 7,6910,2 5 8,4710,5 5 8,5211 5 9,9011,5 5 10,8712 5 12,3712,5 5 13,3613 5 14,40
Seite 64 04 / 2019
Preise per Stück
HSS-Spiralbohrer, Typ N ECO 250
HSS twist drill type N
dGesamtlängeSpirallänge
0,5226
0,6247
0,7289
0,83010
0,93211
1,03412
1,13614
1,23816
1,253816
1,33816
1,44018
1,54018
1,64320
1,74320
1,754622
geschliffenDIN 338
künftig ISO / EN
HSSE
Meches HSS, type N
-
Abmessung VPE Preis €
1 10 1,311,1 10 1,601,2 10 1,601,3 10 1,601,4 10 1,601,5 10 1,401,6 10 1,771,7 10 1,771,8 10 1,771,9 10 1,772 10 1,412,1 10 1,772,2 10 1,772,3 10 1,772,4 10 1,772,5 10 1,602,6 10 1,872,7 10 1,872,8 10 1,952,9 10 1,953 10 1,753,1 10 2,123,2 10 2,123,3 10 2,123,4 10 2,123,5 10 2,123,6 10 2,443,7 10 2,443,8 10 2,533,9 10 2,534 10 2,254,1 10 2,714,2 10 2,714,3 10 2,714,4 10 2,714,5 10 2,714,6 10 3,074,7 10 3,074,8 10 3,074,9 10 3,075 10 3,07
Abmessung VPE Preis €
5,1 10 3,495,2 10 3,495,3 10 3,685,4 10 3,685,5 10 3,685,6 10 3,965,7 10 3,965,8 10 3,965,9 10 3,966 10 3,706,1 10 4,616,2 10 4,616,3 10 4,616,4 10 4,616,5 10 4,616,6 10 5,276,7 10 5,276,8 10 5,276,9 10 5,277 10 5,047,1 10 6,087,2 10 6,087,3 10 6,087,4 10 6,087,5 10 5,867,6 10 7,607,7 10 7,607,8 10 7,607,9 10 7,608 10 7,408,1 10 8,338,2 10 8,338,3 10 8,338,4 10 8,338,5 10 8,338,6 10 9,238,7 5 9,238,8 5 9,238,9 5 9,239 5 8,789,1 5 10,40
Abmessung VPE Preis €
9,2 5 10,409,3 5 10,409,4 5 10,409,5 5 10,409,6 5 12,009,7 5 12,009,8 5 12,009,9 5 12,0010 5 11,4510,2 5 12,6310,5 5 12,6311 5 13,5211,5 5 14,8312 5 17,0112,5 5 18,0113 5 19,77
Preise per Stück
04 / 2019 Seite 65
Rohrmuttern
blankDIN 431
künftig ISO / EN
5.8-
Abmessung VPE Preis €
G 1/8 100 37,05G 1/4 100 52,20G 3/8 50 80,35G 1/2 50 120,35G 5/8 50 120,35G 3/4 50 159,00G 7/8 25 230,05G 1 25 281,75G 1 1/8 25 334,70G 1 1/4 25 452,00G 1 1/2 25 606,70G 1 3/4 25 1021,95G 2 25 1309,05
Seite 66 04 / 2019
Preise per 100 Stück
Scheiben mit Außennase
Washers with external tab
Nennweite d1d2fh =s
3,2122,5
20,4
4,3142,5
20,4
5,3173,52,5
0,75
6,4193,5
30,75
8,4223,5
41
10,5264,5
41
13304,54,51,2
15334,54,51,2
17365,54,51,2
19406,54,51,2
21426,54,51,6
23507,56,51,6
25507,56,51,6
31638,59,51,6
3775119,5
2
blankDIN 432
künftig ISO / EN
HV100
Freins d'écrous à ergot extérieur
-
Abmessung VPE Preis €
d 3,2 1000 50,30d 3,7 1000 50,30d 4,3 1000 50,30d 5,3 1000 50,30d 6,4 1000 55,15d 8,4 1000 75,15d 10,5 500 90,25d 13 500 92,85d 15 250 96,45d 17 250 100,95d 19 250 123,55d 21 250 130,65d 23 250 137,70d 25 100 140,00d 27 100 185,35d 28 100 185,35d 31 50 198,00d 34 50 212,90d 37 50 239,45d 40 50 268,85d 43 50 287,90d 46 50 322,15d 50 50 342,10d 54 50 365,65
Preise per 100 Stück
04 / 2019 Seite 67
Scheiben mit Außennase
Washers with external tab
Nennweite d1d2fh =s
3,2122,5
20,4
4,3142,5
20,4
5,3173,52,5
0,75
6,4193,5
30,75
8,4223,5
41
10,5264,5
41
13304,54,51,2
15334,54,51,2
17365,54,51,2
19406,54,51,2
21426,54,51,6
23507,56,51,6
25507,56,51,6
31638,59,51,6
3775119,5
2
verz. blauDIN 432
künftig ISO / EN
HV100
Freins d'écrous à ergot extérieur
-
Abmessung VPE Preis €
d 4,3 1000 67,05d 6,4 1000 73,50d 8,4 1000 100,15d 10,5 500 120,30d 13 500 123,90d 17 250 134,50d 23 250 174,15d 23 250 183,55d 25 100 186,60d 28 100 247,05d 31 50 263,95
Seite 68 04 / 2019
Preise per 100 Stück
Scheiben mit Außennase, A2
Washers with external tab
Nennweite d1d2fh =s
3,2122,5
20,4
4,3142,5
20,4
5,3173,52,5
0,75
6,4193,5
30,75
8,4223,5
41
10,5264,5
41
13304,54,51,2
15334,54,51,2
17365,54,51,2
19406,54,51,2
21426,54,51,6
23507,56,51,6
25507,56,51,6
31638,59,51,6
3775119,5
2
blankDIN 432
künftig ISO / EN
A2
Freins d'écrous à ergot extérieur
-
Abmessung VPE Preis €
d 8,4 100 141,00d 10,5 100 194,70d 17 50 349,10d 21 50 418,30d 25 25 557,75d 31 25 970,85
Preise per 100 Stück
04 / 2019 Seite 69
Scheiben /140 HV
Washers for cheese head screws
d1d2sfür Schrauben
2,24,50,3M 2
2,75
0,5M 2,5
3,26
0,5M 3
4,38
0,5M 4
5,391
M 5
6,4111,6
M 6
8,4151,6
M 8
10,5181,6
M 10
13202
M 12
15242,5
M 14
17282,5
M 16
19302,5
M 18
verz. blauDIN 433
künftig ISO / EN i07092
HV140
Rondelles
-
Abmessung VPE Preis €
d 1,1 1000 0,70d 1,3 1000 0,70d 1,5 1000 0,70d 1,7 1000 0,70d 1,9 1000 0,70d 2,2 1000 0,70d 2,7 1000 0,70d 3,2 1000 0,50d 3,7 1000 0,55d 4,3 1000 0,60d 5,3 1000 0,75d 6,4 1000 1,55d 8,4 1000 2,40d 10,5 1000 3,50d 13 1000 4,75d 15 500 7,75d 17 500 9,35d 19 250 14,90d 21 250 16,15
Seite 70 04 / 2019
Preise per 100 Stück
Scheiben vorzugsweise für Zylinderschrauben
Washers for cheese head screws
d1d2sfür Schrauben
3,26
0,5M 3
4,38
0,5M 4
5,391
M 5
6,4111,6M 6
8,4151,6M 8
10,5181,6
M 10
13202
M 12
15242,5
M 14
17282,5
M 16
19302,5
M 18
21343
M 20
blankDIN 433
künftig ISO / EN i07092
A2
Rondelles
-
Abmessung VPE Preis €
d 2,2 2000 2,75d 2,7 2000 2,75d 3,2 2000 0,60d 3,7 1000 2,60d 4,3 1000 0,75d 5,3 1000 1,05d 6,4 1000 1,65d 8,4 500 2,90d 10,5 500 4,85d 13 200 8,15d 15 200 18,50d 17 200 18,50d 19 100 28,40d 21 100 31,50
Preise per 100 Stück
04 / 2019 Seite 71
Scheiben vierkant für U-Träger Neigung 8% 100 HV
Square taper washers for U-sections
dabh min.r
922223,21,6
1122223,21,6
13,526303,9
2
17,532364,92,4
2240446
2,8
2444507
3,2
2656567,33,2
3056567,33,2
verz. blauDIN 434
künftig ISO / EN
HV100
Plaquettes obliques (carrées) pour profilés en U.
-
Abmessung VPE Preis €
d 9 100 28,35d 11 100 28,35d 13,5 100 37,55d 17,5 100 53,65d 22 50 93,80d 24 50 168,85d 26 50 244,45d 30 50 292,45d 33 50 354,25d 36 50 466,90
Seite 72 04 / 2019
Preise per 100 Stück
Scheiben vierkant für U-Träger Neigung 8% 100 HV
Square taper washers for U-sections
dabh min.r
922223,21,6
1122223,21,6
13,526303,9
2
17,532364,92,4
2240446
2,8
2444507
3,2
2656567,33,2
3056567,33,2
tznDIN 434
künftig ISO / EN
HV100
Plaquettes obliques (carrées) pour profilés en U.
-
Abmessung VPE Preis €
d 9 100 30,30d 11 100 30,30d 13,5 100 41,30d 17,5 100 59,95d 22 50 105,50d 24 50 185,40d 26 50 270,65d 30 50 316,70d 33 50 385,30d 36 50 505,20
Preise per 100 Stück
04 / 2019 Seite 73
Scheiben vierkant für I-Träger Neigung 14% 100 HV
Square taper washers for I-sections
dabhr
922223,61,2
1122223,61,2
13,526305
1,6
17,532366,3
2
2240448
2,4
2444508,82,4
2656569,32,4
3056569,32,4
verz. blauDIN 435
künftig ISO / EN
HV100
Plaquettes obliques (carrées) pour profilés en 1.
-
Abmessung VPE Preis €
d 9 100 43,50d 11 100 43,50d 13,5 100 47,30d 17,5 100 73,60d 22 50 123,70d 24 50 204,00d 26 50 311,45d 30 50 361,95d 33 50 428,95d 36 50 558,65
Seite 74 04 / 2019
Preise per 100 Stück
Scheiben vierkant für I-Träger Neigung 14% 100 HV
Square taper washers for I-sections
dabhr
922223,61,2
1122223,61,2
13,526305
1,6
17,532366,3
2
2240448
2,4
2444508,82,4
2656569,32,4
3056569,32,4
tznDIN 435
künftig ISO / EN
HV100
Plaquettes obliques (carrées) pour profilés en 1.
-
Abmessung VPE Preis €
d 9 100 45,50d 11 100 45,50d 13,5 100 51,35d 17,5 100 80,80d 22 50 137,45d 24 50 222,15d 26 50 340,50d 30 50 388,55d 33 50 463,65d 36 50 603,00
Preise per 100 Stück
04 / 2019 Seite 75
Scheiben vierkant vorwiegend für Holzkonstruktione
Square washers for wood constructions
d1 Nennmaßasfür Schrauben
9--
M 8
11303
M 10
13,5404
M 12
17,5505
M 16
22605
M 20
24706
M 22
26806
M 24
30906
M 27
verz. blauDIN 436
künftig ISO / EN
HV100
Plaquettes carrées pour construction en bois
-
Abmessung VPE Preis €
d 9 100 16,30d 11 100 16,40d 13,5 100 34,55d 17,5 50 64,25d 22 25 97,85d 24 25 163,25d 26 50 211,75d 30 50 313,00d 33 50 345,30d 36 50 382,65d 39 50 637,25d 42 25 824,85d 45 25 969,10d 48 25 1121,55d 52 25 1808,30
Seite 76 04 / 2019
Preise per 100 Stück
Sechskantmuttern niedrige Form
Hexagon thin nuts
dm max.s Nennmaße
M 31,85,5
6,01
M 42,2
77,66
M 52,7
88,79
M 63,210
11,05
M 84
1314,38
M 105
1718,90
M 126
1921,1
M 147
2224,49
M 168
2426,75
M 189
2729,56
M 201030
32,95
M 221134
37,29
M 241236
39,55
M 2713,5
4145,2
M 301546
50,85
blankDIN 439
künftig ISO / EN i04035/i04036
04
Ecrous à six pans
-
Abmessung VPE Preis €
3 1000 1,804 1000 2,055 1000 2,456 1000 3,508 1000 7,0010 500 12,1512 500 18,2514 200 28,8516 200 32,8518 100 55,6020 100 68,2022 50 135,2524 50 146,4527 25 333,1530 25 401,35
Preise per 100 Stück
04 / 2019 Seite 77
Sechskantmuttern niedrige Form. Verzinkt
Hexagon thin nuts
dm max.s Nennmaße
M 31,85,5
6,01
M 42,2
77,66
M 52,7
88,79
M 63,210
11,05
M 84
1314,38
M 105
1718,90
M 126
1921,1
M 147
2224,49
M 168
2426,75
M 189
2729,56
M 201030
32,95
M 221134
37,29
M 241236
39,55
M 2713,5
4145,2
M 301546
50,85
verz. blauDIN 439
künftig ISO / EN i04035
04
Ecrous à six pans
-
Abmessung VPE Preis €
2 1000 6,002,5 1000 4,753 1000 1,854 1000 2,255 1000 2,656 1000 3,908 1000 7,6510 500 13,7512 500 20,5514 200 32,3016 200 37,3518 100 61,9520 100 76,9522 50 145,7524 50 161,4527 25 355,2530 25 431,2533 25 636,5536 25 844,55
Seite 78 04 / 2019
Preise per 100 Stück
Sechskantmuttern niedrige Form
Hexagon thin nuts
dm max.s Nennmaße
M 21,2
44,32
M 2,51,6
55,45
M 31,85,5
6,01
M 42,2
77,66
M 52,7
88,79
M 63,210
11,05
M 84
1314,38
M 105
1718,90
M 126
1921,1
M 168
2426,75
M 201030
32,95
M 241236
39,55
M 2713,5
4145,2
M 301546
50,85
blankDIN 439
künftig ISO / EN i04035/i04036
A2
Ecrous à six pans
-
Abmessung VPE Preis €
2,5 1000 3,903 1000 3,904 1000 4,155 1000 4,306 1000 4,708 500 9,008 x 1 500 28,4010 200 19,4010 x 1 200 54,7512 200 24,2012 x 1,5 200 79,0514 100 67,6514 x 1,5 100 144,1016 100 87,3016 x 1,5 100 152,8518 x 1,5 50 191,1020 50 162,7020 x 1,5 50 247,9022 x 1,5 25 340,8524 25 258,2524 x 1,5 25 387,3030 x 1,5 25 764,30
Preise per 100 Stück
04 / 2019 Seite 79
Sechskantmuttern niedrige Form Feingewinde
Hexagon thin nuts
dmse
M 84
1314,38
M 105
1718,90
M 126
1921,1
M 147
2224,49
M 168
2426,75
M 189
2729,56
M 201030
32,95
M 221134
37,29
M 241236
39,55
M 2713,5
4145,2
M 301546
50,85
M 3316,5
5055,37
M 361855
60,79
blankDIN 439
künftig ISO / EN i08675
04
Ecrous à six pans
-
Abmessung VPE Preis €
8 x 1 1000 9,8510 x 1 500 15,1010 x 1,25 500 15,1012 x 1,25 500 24,2512 x 1,50 500 24,2514 x 1,5 200 30,8516 x 1,5 200 31,9518 x 1,5 100 66,6518 x 2 100 66,6520 x 1,5 100 80,8020 x 2 100 80,8022 x 1,5 50 153,3022 x 2 50 153,3024 x 1,5 50 210,9524 x 2 50 210,9527 x 1,5 25 363,5027 x 2 25 363,5030 x 1,5 25 419,0030 x 2 25 419,00
Seite 80 04 / 2019
Preise per 100 Stück
Sechskantmuttern niedrige Form Feingewinde, verzin
Hexagon thin nuts
dmse
M 84
1314,38
M 105
1718,90
M 126
1921,1
M 147
2224,49
M 168
2426,75
M 189
2729,56
M 201030
32,95
M 221134
37,29
M 241236
39,55
M 2713,5
4145,2
M 301546
50,85
M 3316,5
5055,37
M 361855
60,79
verz. blauDIN 439
künftig ISO / EN i08675
04
Ecrous à six pans
-
Abmessung VPE Preis €
8 x 1 1000 13,1010 x 1 500 20,1510 x 1,25 500 20,1512 x 1 500 32,3512 x 1,25 500 32,3512 x 1,5 500 32,3514 x 1,5 200 41,1016 x 1,5 200 47,8018 x 1,5 100 80,7518 x 2 100 80,7520 x 1,5 100 107,7020 x 2 100 107,7022 x 1,5 50 204,2522 x 2 50 204,2524 x 1,5 50 251,0524 x 2 50 251,0527 x 1,5 25 432,4527 x 2 25 432,4530 x 1,5 25 498,5530 x 2 25 498,55
Preise per 100 Stück
04 / 2019 Seite 81
Scheiben vorwiegend für Holzkonstruktionen Form R
Round washers for wood constructions
d1d2sfür Schrauben
5,5182
M 5
6,6222
M 6
9283
M 8
11343
M 10
13,5444
M 12
17,5565
M 16
22726
M 20
24806
M 22
26856
M 24
30986
M 27
33105
6M 30
verz. blauDIN 440
künftig ISO / EN i07094
Stahl
Rondelles pour construction en bois
-
Abmessung VPE Preis €
R 5,5 1000 4,90R 6,6 500 5,70R 9 200 11,10R 11 200 15,95R 13,5 100 34,55R 17,5 50 70,15R 22 25 98,20R 26 25 238,75
Seite 82 04 / 2019
Preise per 100 Stück
Augenschrauben Form B
Eye bolts
b1 = l < 120 mmb1 = l < 125 mmb2 = 125 - 200 mb3 = l > 200 mmd2 H 9
M 82228
-
M 102632
-
M 12303649
M 16384457
blankDIN 444
künftig ISO / EN
4.8
Vis à oeil
-
Abmessung VPE Preis €
BM 6 x 30 200 120,55BM 6 x 35 200 114,45BM 8 x 30 200 133,55BM 10 x 30 100 152,95BM 10 x 35 100 154,80BM 6 x 40 200 110,80BM 8 x 40 200 137,45BM 10 x 40 100 156,85BM 12 x 40 100 166,55BM 16 x 45 25 550,60BM 6 x 50 200 116,00BM 8 x 50 200 141,90BM 10 x 50 100 161,35BM 12 x 50 100 173,70BM 16 x 50 25 550,60BM 16 x 55 25 550,30BM 6 x 60 200 125,10BM 8 x 60 200 145,20BM 10 x 60 100 165,95BM 12 x 60 100 178,85BM 16 x 60 25 550,65BM 16 x 65 25 546,05BM 6 x 70 200 149,05BM 8 x 70 200 150,35BM 10 x 70 100 170,40BM 12 x 70 50 183,40BM 16 x 70 25 578,80BM 6 x 80 200 174,95BM 8 x 80 200 154,90BM 10 x 80 100 173,70BM 12 x 80 50 189,20BM 16 x 80 25 597,30BM 20 x 80 25 826,95BM 8 x 90 100 162,70BM 10 x 90 100 180,85BM 12 x 90 50 195,05BM 16 x 90 25 614,10BM 20 x 90 25 844,75BM 8 x 100 100 165,25BM 10 x 100 100 183,40BM 12 x 100 50 216,45
Abmessung VPE Preis €
BM 16 x 100 25 629,40BM 20 x 100 25 874,30BM 8 x 110 100 187,90BM 10 x 110 100 195,05BM 12 x 110 50 226,20BM 16 x 110 25 648,55BM 20 x 110 25 907,95BM 10 x 120 50 202,20BM 12 x 120 50 243,00BM 16 x 120 25 666,05BM 20 x 120 25 940,25BM 10 x 130 50 211,30BM 12 x 130 50 263,15BM 16 x 130 25 684,95BM 20 x 130 25 990,35BM 8 x 140 100 227,50BM 10 x 140 50 226,75BM 12 x 140 50 284,50BM 16 x 140 25 706,75BM 20 x 140 25 1059,75BM 12 x 150 50 311,05BM 16 x 150 25 729,35BM 20 x 150 25 1133,20BM 12 x 160 25 355,05BM 16 x 160 25 753,45BM 20 x 160 10 1218,40BM 12 x 180 25 375,85BM 16 x 180 25 801,55BM 20 x 180 10 1416,90BM 16 x 190 25 820,70BM 16 x 200 25 870,20BM 20 x 200 10 1568,60
Preise per 100 Stück
04 / 2019 Seite 83
Sicherungsbleche mit Innennase für Nutmuttern DIN
Internal tab washers for slotted round nuts accord
d1d2sfg
8200,8
35,9
10250,8
47,4
12280,8
59,3
14300,8
511,4
163215
13,5
183416
15,4
203616
17,5
224016
19,5
244216
21,6
264517
23,5
285017
25,5
30501,2
727,5
32521,2
729,6
35551,2
732,6
38581,2
835,3
blankDIN 462
künftig ISO / EN
HV100
Freins à ergot intérieur
-
Abmessung VPE Preis €
d 8 1000 77,95d 10 500 82,95d 12 500 86,95d 14 250 91,30d 16 250 94,50d 18 250 101,40d 20 250 110,05d 22 250 114,70d 24 100 120,15d 26 100 123,00d 28 100 129,10d 30 50 129,10d 32 50 141,75d 35 50 163,70d 38 50 176,75d 40 50 190,75d 42 50 190,75d 45 50 203,80d 48 50 210,95d 50 50 210,95d 52 50 236,55d 55 50 236,55d 58 50 276,60d 60 50 276,60d 62 10 302,15d 65 10 302,15d 68 10 329,95d 70 10 329,95d 72 10 409,70d 75 10 409,70d 80 10 471,30d 85 10 523,90d 90 10 599,65d 95 10 752,55d 100 10 894,95d 105 10 1081,70
Seite 84 04 / 2019
Preise per 100 Stück
Scheiben mit 2 Lappen
Washers with 2 tabs
d1bd2i1i2
3,247
135
3,748
135,5
4,359
146,5
5,36
10168
6,47
12,5189
8,48
172011
10,510212213
1312242815
1512282816
1715303218
1918343620
2118373621
2320394223
2520444225
2823504829
blankDIN 463
künftig ISO / EN
HV100
Freins d'écrous d'équerre à aileron
-
Abmessung VPE Preis €
d 3,2 1000 7,95d 3,7 1000 7,95d 4,3 1000 8,65d 5,3 1000 9,45d 6,4 1000 10,50d 8,4 1000 14,10d 10 500 16,30d 13 500 19,95d 15 250 21,00d 17 250 27,80d 19 250 29,65d 21 250 31,45d 23 250 46,60d 25 100 48,35d 28 100 94,50d 31 50 104,25d 34 50 116,50d 37 50 131,65d 40 50 153,30d 43 50 158,40d 46 50 179,60d 50 50 213,85d 54 50 239,10
Preise per 100 Stück
04 / 2019 Seite 85
Hohe Rändelschrauben
Knurled thumb screws
db max.dk Nennmaßds Nennmaßh Nennmaß
M 39
126
7,5
M 412168
9,5
M 5152010
11,5
M 618241215
M 824301618
M 1030362023
blankDIN 464
künftig ISO / EN
5.8
Vis moletées
-
Abmessung VPE Preis €
4 x 5 100 62,254 x 6 100 63,504 x 8 100 65,854 x 10 100 68,404 x 12 100 70,654 x 16 100 92,104 x 20 100 99,305 x 6 100 115,605 x 8 100 117,205 x 10 100 118,805 x 12 100 120,455 x 16 100 122,105 x 20 100 123,705 x 25 100 130,155 x 30 100 146,456 x 8 100 152,956 x 10 100 156,206 x 12 100 159,456 x 16 100 162,706 x 20 100 164,456 x 25 100 165,956 x 30 100 182,256 x 35 100 192,008 x 10 50 231,108 x 12 50 234,308 x 16 50 237,558 x 20 50 239,208 x 25 50 240,858 x 30 50 242,458 x 35 50 244,058 x 40 50 249,00
Seite 86 04 / 2019
Preise per 100 Stück
Hohe Rändelschrauben
Knurled thumb screws
db max.dk Nennmaßds Nennmaßh Nennmaß
M 39
126
7,5
M 412168
9,5
M 5152010
11,5
M 618241215
M 824301618
M 1030362023
verz. blauDIN 464
künftig ISO / EN
5.8
Vis moletées
-
Abmessung VPE Preis €
4 x 5 100 82,954 x 6 100 84,604 x 8 100 87,754 x 10 100 91,104 x 12 100 94,204 x 16 100 122,754 x 20 100 132,355 x 10 100 158,405 x 12 100 160,555 x 16 100 162,755 x 20 100 164,905 x 25 100 173,555 x 30 100 195,206 x 8 100 203,856 x 10 100 208,206 x 12 100 212,556 x 16 100 216,906 x 20 100 219,206 x 25 100 221,156 x 30 100 242,956 x 35 100 255,958 x 16 50 316,658 x 20 50 318,858 x 25 50 321,008 x 30 50 323,208 x 35 50 325,35
Preise per 100 Stück
04 / 2019 Seite 87
Hohe Rändelschrauben, A2
Knurled thumb screws
db max.dk Nennmaßds Nennmaßh Nennmaß
M 39
126
7,5
M 412168
9,5
M 5152010
11,5
M 618241215
M 824301618
M 1030362023
blankDIN 464
künftig ISO / EN
A2
Vis moletées
-
Abmessung VPE Preis €
3 x 6 50 201,403 x 8 50 201,403 x 12 50 205,503 x 10 50 206,603 x 16 50 227,253 x 20 50 247,904 x 6 50 168,754 x 8 50 230,104 x 10 50 237,004 x 12 50 250,504 x 16 50 268,554 x 20 50 286,655 x 6 25 398,505 x 8 25 411,605 x 10 25 424,005 x 12 25 432,005 x 16 25 437,005 x 20 25 454,005 x 25 25 465,005 x 35 25 475,006 x 10 25 490,606 x 12 25 526,006 x 16 25 578,406 x 20 25 645,506 x 30 25 700,00
Seite 88 04 / 2019
Preise per 100 Stück
Hohe Rändelmuttern
Knurled nuts, with collar
ddkdshk
M 3126
7,52,5
M 4168
9,53,5
M 52010
11,54
M 62412155
M 83016186
M 103620238
blankDIN 466
künftig ISO / EN
5.8
Ecrous moletés
-
Abmessung VPE Preis €
3 100 22,754 100 37,355 100 56,806 100 94,008 50 162,0510 50 259,20
Preise per 100 Stück
04 / 2019 Seite 89
Hohe Rändelmuttern, verzinkt
Knurled nuts, with collar
ddkdshk
M 3126
7,52,5
M 4168
9,53,5
M 52010
11,54
M 62412155
M 83016186
M 103620238
verz. blauDIN 466
künftig ISO / EN
5.8
Ecrous moletés
-
Abmessung VPE Preis €
3 100 30,304 100 49,755 100 75,706 100 125,358 50 216,0010 50 345,55
Seite 90 04 / 2019
Preise per 100 Stück
Hohe Rändelmuttern, A2
Knurled nuts, with collar
ddkdshk
M 3126
7,52,5
M 4168
9,53,5
M 52010
11,54
M 62412155
M 83016186
M 103620238
blankDIN 466
künftig ISO / EN
A2
Ecrous moletés
-
Abmessung VPE Preis €
3 100 108,454 100 113,605 50 139,456 50 214,358 25 411,60
Preise per 100 Stück
04 / 2019 Seite 91
Flache Rändelmuttern
Flat knurled nuts
ddkdshk
M 31263
2,5
M 41684
3,5
M 5201054
M 6241265
M 8301686
M 103620108
blankDIN 467
künftig ISO / EN
5.8
Ecrous moletés
-
Abmessung VPE Preis €
3 100 19,504 100 26,055 100 43,856 100 68,058 50 115,1010 50 183,00
Seite 92 04 / 2019
Preise per 100 Stück
Flache Rändelmuttern, verzinkt
Flat knurled nuts
ddkdshk
M 31263
2,5
M 41684
3,5
M 5201054
M 6241265
M 8301686
M 103620108
verz. blauDIN 467
künftig ISO / EN
5.8
Ecrous moletés
-
Abmessung VPE Preis €
3 100 25,954 100 34,605 100 58,406 100 90,808 50 153,4010 220 244,05
Preise per 100 Stück
04 / 2019 Seite 93
Flache Rändelmuttern, A2
Flat knurled nuts
ddkdshk
M 31263
2,5
M 41684
3,5
M 5201054
M 6241265
M 8301686
M 103620108
blankDIN 467
künftig ISO / EN
A2
Ecrous moletés
-
Abmessung VPE Preis €
3 100 108,454 100 113,605 50 139,456 50 214,358 25 415,75
Seite 94 04 / 2019
Preise per 100 Stück
Sicherungsringe für Wellen
Retaining rings for shafts (circlips)
WellendurchmesDicke sSicherungsring uBreite b
30,42,70,8
40,43,70,9
50,64,71,1
60,75,61,3
70,86,51,4
80,87,41,5
91
8,41,7
101
9,31,8
111
10,21,8
121
111,8
131
11,92
141
12,92,1
151
13,82,2
161
14,72,2
171
15,72,3
brüniertDIN 471
künftig ISO / EN
Stahl
Circlips (extérieurs) pour arbres
-
Abmessung VPE Preis €
A 3 10000 1,65A 4 10000 1,40A 5 5000 1,85A 6 5000 1,95A 7 2500 2,40A 8 2000 2,20A 9 2000 3,50A 10 2000 3,15A 11 1000 4,05A 12 1000 3,50A 13 1000 4,15A 14 1000 4,25A 15 1000 4,70A 16 1000 4,80A 17 1000 5,90A 18 1000 6,85A 19 1000 7,85A 20 1000 7,65A 21 1000 9,50A 22 500 9,60A 23 500 13,30A 24 500 10,35A 25 500 11,10A 26 500 13,30A 27 500 16,45A 28 500 17,55A 29 500 20,95A 30 250 18,00A 31 250 24,95A 32 250 21,45A 33 250 28,45A 34 250 24,00A 35 250 24,20A 36 250 31,85A 37 250 40,90A 38 250 33,70A 39 250 35,45A 40 100 37,15A 41 100 40,10A 42 100 42,30A 44 100 50,45
Abmessung VPE Preis €
A 45 100 44,05A 46 100 64,75A 47 100 54,15A 48 100 54,40A 50 100 51,45A 52 100 64,65A 54 100 71,05A 55 100 58,40A 56 100 79,70A 57 100 81,85A 58 100 80,10A 60 100 67,35A 62 100 80,10A 63 100 92,45A 65 50 94,30A 67 50 119,15A 68 50 114,55A 70 50 100,70A 72 50 132,20A 75 50 117,40A 77 50 142,25A 78 50 143,10A 80 50 120,35A 82 50 141,70A 85 50 162,40A 87 50 232,05A 88 50 204,15A 90 50 173,00A 92 50 233,80A 95 50 189,55A 97 50 236,30A 100 50 205,45A 107 25 578,55A 110 25 440,80A 112 25 487,35A 115 25 533,90A 120 25 473,15A 125 25 555,70A 127 25 662,20A 130 25 601,45A 135 25 727,70
Abmessung VPE Preis €
A 140 25 707,75A 145 25 762,80A 150 25 698,05A 155 25 915,80A 160 25 860,65
Preise per 100 Stück
04 / 2019 Seite 95
Sicherungsringe für Wellen, A2
Retaining rings for shafts (circlips)
WellendurchmesDicke sSicherungsring uBreite b
50,64,71,1
60,75,61,3
70,86,51,4
80,87,41,5
91
8,41,7
101
9,31,8
111
10,21,8
121
111,8
131
11,92
141
12,92,1
151
13,82,2
161
14,72,2
171
15,72,3
181,2
16,52,4
191,2
17,52,5
blankDIN 471
künftig ISO / EN
A2
Circlips (extérieurs) pour arbres
-
Abmessung VPE Preis €
A 5 200 13,71A 6 200 11,34A 7 200 14,70A 8 200 11,19A 9 200 24,93A 10 200 18,70A 11 200 22,15A 12 200 18,90A 13 200 30,02A 14 200 31,75A 15 200 28,77A 16 200 27,96A 17 100 42,14A 18 100 54,26A 19 100 64,27A 20 100 54,65A 22 100 70,70A 24 100 107,67A 25 100 82,88A 26 50 153,43A 28 50 134,97A 30 50 148,30A 32 50 219,10A 34 50 222,79A 35 50 208,70A 38 25 309,78A 40 25 294,31A 42 25 366,35A 45 25 356,61A 50 25 301,73A 60 25 440,52A 65 10 672,00A 70 10 928,00A 85 10 1383,52A 100 10 1909,71
Seite 96 04 / 2019
Preise per 100 Stück
Sicherungsringe für Bohrungen
Retaining rings for bores
BohrungsdurchmDicke sSicherungsring uBreite b
80,88,71,1
90,89,81,3
101
10,81,4
111
11,81,5
121
131,7
131
14,11,8
141
15,11,9
151
16,22
161
17,32
171
18,32,1
181
19,52,2
191
20,52,2
201
21,52,3
211
22,52,4
221
23,52,5
brüniertDIN 472
künftig ISO / EN
Stahl
Circlips (intérieurs) pour alésages
-
Abmessung VPE Preis €
I 8 2500 3,15I 9 2000 3,90I 10 2000 3,25I 11 2000 3,50I 12 1000 3,70I 13 1000 4,25I 14 1000 4,05I 15 1000 3,80I 16 1000 4,25I 17 1000 4,80I 18 1000 4,90I 19 1000 5,10I 20 1000 5,45I 21 1000 6,30I 22 1000 6,20I 23 1000 9,25I 24 500 8,30I 25 500 8,95I 26 500 9,70I 27 500 10,55I 28 500 10,70I 29 500 12,75I 30 500 11,45I 31 500 14,15I 32 500 11,90I 33 250 17,20I 34 250 17,20I 35 250 17,65I 36 250 18,85I 37 250 23,20I 38 250 23,45I 39 250 32,25I 40 100 31,05I 41 100 44,35I 42 100 33,70I 43 100 43,80I 44 100 44,35I 45 100 35,45I 46 100 43,95I 47 100 37,95I 48 100 39,00
Abmessung VPE Preis €
I 50 100 41,40I 51 100 52,30I 52 100 42,75I 53 100 59,95I 54 100 58,30I 55 100 47,85I 56 100 59,85I 57 100 60,60I 58 100 57,10I 60 100 53,10I 62 100 55,80I 63 100 71,30I 65 50 83,05I 67 50 97,90I 68 50 78,80I 70 50 89,70I 72 50 83,15I 75 50 87,55I 78 50 104,65I 80 50 93,30I 82 50 107,25I 85 50 121,95I 88 50 197,60I 90 50 137,10I 92 50 145,85I 95 50 150,10I 98 50 171,55I 100 50 151,95I 102 25 278,95I 105 25 247,45I 108 25 283,05I 110 25 261,05I 112 25 384,55I 115 25 300,50I 118 25 398,95I 120 25 318,95I 122 25 330,50I 125 25 313,05I 128 25 403,40I 130 25 340,40I 135 25 393,60
Abmessung VPE Preis €
I 138 25 402,10I 140 25 410,50I 145 25 453,10I 148 25 1173,30I 150 25 457,45I 152 25 627,50I 155 25 600,35I 160 25 548,80I 170 25 610,50I 200 25 982,95I 260 25 2976,05
Preise per 100 Stück
04 / 2019 Seite 97
Sicherungsringe für Bohrungen
Retaining rings for bores
BohrungsdurchmDicke sSicherungsring uBreite b
80,88,71,1
90,89,81,3
101
10,81,4
111
11,81,5
121
131,7
131
14,11,8
141
15,11,9
151
16,22
161
17,32
171
18,32,1
181
19,52,2
191
20,52,2
201
21,52,3
211
22,52,4
221
23,52,5
blankDIN 472
künftig ISO / EN
A2
Circlips (intérieurs) pour alésages
-
Abmessung VPE Preis €
I 8 200 24,00I 9 200 28,80I 10 200 22,56I 11 200 32,10I 12 200 32,22I 13 200 31,38I 14 200 34,08I 15 200 34,68I 16 200 35,40I 17 100 42,60I 18 100 40,08I 19 100 42,06I 20 100 41,58I 21 100 50,16I 22 100 50,10I 23 100 77,40I 24 100 75,60I 25 100 82,14I 26 50 88,08I 28 50 90,18I 30 50 99,00I 32 25 109,50I 35 25 151,20I 36 25 159,72I 37 25 190,80I 40 25 226,20I 41 25 407,40I 42 25 225,00I 44 25 292,02I 45 25 287,10I 47 25 261,00I 48 25 313,20I 50 25 273,60I 52 25 287,40I 55 25 310,20I 62 10 388,20I 65 10 467,40I 68 10 525,60I 70 10 624,00I 72 10 678,00I 75 10 748,20
Abmessung VPE Preis €
I 80 10 821,22I 90 10 1141,74I 95 10 1355,40I 100 10 1968,00I 110 10 5376,00I 130 10 5628,00I 140 10 5862,00
Seite 98 04 / 2019
Preise per 100 Stück
T-Nutensteine Kl. 8
blankDIN 508
künftig ISO / EN
8-
Abmessung VPE Preis €
6 x M 5 25 118,008 x M 6 25 129,0010 x M 6 25 133,0010 x M 8 25 136,0012 x M 10 10 140,0014 x M 8 10 140,0014 x M 10 10 148,0014 x M 12 10 158,0016 x M 12 10 220,0016 x M 14 10 220,0018 x M 16 10 262,0022 x M 20 10 428,0028 x M 24 10 817,0036 x M 30 10 1684,60
Preise per 100 Stück
04 / 2019 Seite 99
T-Nutensteine Kl. 10
blankDIN 508
künftig ISO / EN
10-
Abmessung VPE Preis €
10 x M 8 25 150,0012 x M 10 10 154,0014 x M 10 10 174,0014 x M 12 10 174,0018 x M 16 10 289,0022 x M 20 10 471,0028 x M 24 10 899,0036 x M 30 10 2021,95
Seite 100 04 / 2019
Preise per 100 Stück
Vierkantmuttern niedrige Form
Square thin nuts, without chamfer
de minms
M 37
1,85,5
M 48,92,2
7
M 510,22,7
8
M 612,73,210
M 816,5
413
M 1021,8
517
verz. blauDIN 562
künftig ISO / EN
4.8
Ecrous carrés, bas
-
Abmessung VPE Preis €
3 1000 2,454 1000 2,855 1000 3,556 1000 4,608 1000 10,3510 500 20,35
Preise per 100 Stück
04 / 2019 Seite 101
Sechskant-Holzschrauben
Hexagon wood screws/coach screws
dk Nennmaßs Nennmaß
53,5
8
64
10
85,513
107
17
128
19
161024
verz. blauDIN 571
künftig ISO / EN
Stahl
Vis à bois à tête hexagonale
-
Abmessung VPE Preis €
5 x 20 500 10,205 x 25 500 9,905 x 30 500 9,905 x 35 200 10,455 x 40 200 10,955 x 45 200 12,455 x 50 200 12,905 x 60 200 14,656 x 20 500 4,806 x 25 500 5,406 x 30 500 6,106 x 35 200 6,806 x 40 200 7,306 x 45 200 7,856 x 50 200 8,356 x 60 200 10,056 x 70 200 11,006 x 80 200 13,106 x 90 100 14,156 x 100 100 16,206 x 120 100 19,358 x 25 200 10,308 x 30 200 11,508 x 35 200 13,108 x 40 200 13,808 x 45 200 14,658 x 50 200 15,158 x 60 200 17,808 x 70 200 19,358 x 80 200 23,008 x 90 100 25,108 x 100 100 28,258 x 120 100 33,508 x 140 50 39,758 x 150 50 57,558 x 160 50 62,808 x 180 50 57,558 x 200 50 62,8010 x 30 200 20,9510 x 35 100 21,9510 x 40 100 24,05
Abmessung VPE Preis €
10 x 45 100 25,1010 x 50 100 26,7510 x 60 100 30,3510 x 70 100 34,5510 x 80 100 38,7010 x 90 100 41,3510 x 100 100 47,1010 x 120 50 52,3010 x 140 50 61,7510 x 150 50 66,4510 x 160 50 71,1510 x 180 50 81,6010 x 200 50 92,1010 x 220 50 104,1010 x 240 50 121,4010 x 260 50 132,9010 x 280 50 162,2010 x 300 50 183,1012 x 40 100 33,5012 x 45 100 36,6012 x 50 100 39,7512 x 60 100 45,0012 x 70 50 48,1512 x 80 50 54,9512 x 90 50 57,5512 x 100 50 65,4012 x 110 50 76,9012 x 120 50 76,9012 x 130 50 90,0012 x 140 50 90,0012 x 150 50 94,2012 x 160 25 104,6512 x 180 25 125,5512 x 200 25 136,0512 x 220 25 156,9512 x 240 25 177,9012 x 260 25 198,8012 x 280 25 219,7512 x 300 25 240,6512 x 320 25 293,0012 x 360 25 345,30
Abmessung VPE Preis €
16 x 60 50 94,2016 x 70 25 104,6516 x 80 25 115,1016 x 90 25 125,5516 x 100 25 136,0516 x 110 25 141,2516 x 120 25 151,7516 x 130 25 167,4016 x 140 25 177,9016 x 150 25 188,3516 x 160 25 198,8016 x 180 25 230,2016 x 200 25 256,3516 x 220 25 282,5516 x 240 25 303,4516 x 260 25 340,1016 x 280 25 397,6516 x 300 25 439,5016 x 320 10 470,9016 x 340 10 502,2516 x 400 10 627,85
Seite 102 04 / 2019
Preise per 100 Stück
Sechskant-Holzschrauben
Hexagon wood screws/coach screws
dk Nennmaßs Nennmaß
53,5
8
64
10
85,513
107
17
128
19
blankDIN 571
künftig ISO / EN
A2
Vis à bois à tête hexagonale
-
Abmessung VPE Preis €
5 x 25 200 12,305 x 30 200 11,505 x 35 200 12,005 x 40 200 14,505 x 45 200 12,905 x 50 200 15,305 x 60 200 19,505 x 70 200 27,006 x 25 200 8,206 x 30 200 8,706 x 35 200 12,006 x 40 200 9,806 x 45 200 12,556 x 50 200 11,506 x 60 200 13,206 x 70 100 15,506 x 80 100 17,506 x 90 100 20,306 x 100 100 23,806 x 110 100 37,506 x 120 100 41,307 x 40 200 16,307 x 45 200 55,157 x 50 100 21,207 x 60 100 23,707 x 70 100 26,707 x 80 100 29,807 x 90 100 34,207 x 100 100 37,007 x 110 100 44,707 x 120 100 53,507 x 150 100 68,708 x 25 100 15,208 x 30 100 15,608 x 35 100 24,558 x 40 100 17,308 x 45 100 24,108 x 50 100 19,708 x 60 100 22,708 x 70 100 26,708 x 80 100 30,30
Abmessung VPE Preis €
8 x 90 100 34,008 x 100 100 38,708 x 110 100 49,508 x 120 100 52,708 x 130 100 66,308 x 140 50 70,808 x 150 50 85,208 x 160 50 96,3010 x 40 100 37,5010 x 50 100 38,8010 x 60 100 44,7010 x 70 100 50,7010 x 80 100 56,7010 x 90 50 63,0010 x 100 50 75,8010 x 110 50 77,5010 x 120 50 84,7010 x 130 50 111,3010 x 140 50 120,7010 x 150 50 130,0010 x 160 50 139,2010 x 180 50 125,4012 x 50 100 130,8012 x 60 100 143,3012 x 70 50 154,2012 x 80 50 168,3012 x 90 50 185,3012 x 100 50 205,8012 x 110 25 229,2012 x 120 25 250,0012 x 130 25 270,8012 x 140 25 291,7012 x 150 25 313,3012 x 160 25 339,2012 x 180 25 227,3012 x 200 25 263,7012 x 250 25 423,34
Preise per 100 Stück
04 / 2019 Seite 103
Ringschrauben
Lifting eye bolts
d1d2d3d4h
M 820362036
M 1025452545
M 1230543053
M 1635633562
M 2040724071
M 2450905090
M 3065
10860
109
M 3675
12670
128
M 4285
14480
147
M 4810016690
168
M 56110184100187
M 64120206110208
blankDIN 580
künftig ISO / EN
C15E
Vis de levage
-
Abmessung VPE Preis €
6 25 75,708 25 75,7010 25 112,3012 10 151,4016 10 229,5020 10 336,9524 5 639,7030 5 1230,55
Seite 104 04 / 2019
Preise per 100 Stück
Ringschrauben, verzinkt
Lifting eye bolts
d1d2d3d4h
M 820362036
M 1025452545
M 1230543053
M 1635633562
M 2040724071
M 2450905090
M 3065
10860
109
M 3675
12670
128
M 4285
14480
147
M 4810016690
168
M 56110184100187
M 64120206110208
verz. blauDIN 580
künftig ISO / EN
C15E
Vis de levage
-
Abmessung VPE Preis €
6 25 78,158 25 78,1510 25 122,1012 10 161,1516 10 249,0520 10 366,2524 5 703,2030 5 1333,10
Preise per 100 Stück
04 / 2019 Seite 105
Ringschrauben
Lifting eye bolts
d1d2d3d4h
M 820362036
M 1025452545
M 1230543053
M 1635633562
M 2040724071
M 2450905090
M 3065
10860
109
blankDIN 580
künftig ISO / EN
A2
Vis de levage
-
Abmessung VPE Preis €
6 25 281,008 25 259,0010 25 371,0012 10 513,0016 10 810,0020 10 2280,00
Seite 106 04 / 2019
Preise per 100 Stück
Ringmuttern
Lifting eye nuts
d1d2d3d4h
M 820362036
M 1025452545
M 1230543053
M 1635633562
M 2040724071
M 2450905090
M 3065
10860
109
M 3675
12670
128
M 4285
14480
147
blankDIN 582
künftig ISO / EN
C15E
Ecrous à anneau
-
Abmessung VPE Preis €
6 25 75,708 25 75,7010 25 112,3012 25 151,4016 25 229,5020 25 336,9524 25 639,7030 25 1230,55
Preise per 100 Stück
04 / 2019 Seite 107
Ringmuttern, verzinkt
Lifting eye nuts
d1d2d3d4h
M 820362036
M 1025452545
M 1230543053
M 1635633562
M 2040724071
M 2450905090
M 3065
10860
109
M 3675
12670
128
M 4285
14480
147
verz. blauDIN 582
künftig ISO / EN
C15E
Ecrous à anneau
-
Abmessung VPE Preis €
6 25 78,158 25 78,1510 25 122,1012 25 161,1516 25 249,0520 25 366,2524 25 703,2030 5 1333,10
Seite 108 04 / 2019
Preise per 100 Stück
Ringmuttern
Lifting eye nuts
d1d2d3d4h
M 820362036
M 1025452545
M 1230543053
M 1635633562
M 2040724071
M 2450905090
M 3065
10860
109
blankDIN 582
künftig ISO / EN
A2
Ecrous à anneau
-
Abmessung VPE Preis €
6 25 236,308 25 241,7010 25 431,4012 10 569,5016 10 811,1020 10 1466,80
Preise per 100 Stück
04 / 2019 Seite 109
Flachrundschrauben mit Vierkantansatz
Mushroom head square neck bolts with nuts
db bis 120 mmb bis 200 mmdk max.k max.
M 51622
13,553,3
M 61824
16,553,88
M 82228
20,654,88
M 102632
24,655,38
M 123036
30,656,95
M 163844
38,88,95
verz. blauDIN 603
künftig ISO / EN i08677
Stahl
Vis à tete bombée à collet carré
-
Abmessung VPE Preis €
5 x 16 500 11,005 x 20 500 11,105 x 25 500 11,305 x 30 500 11,855 x 35 200 12,155 x 40 200 13,205 x 45 200 14,355 x 50 200 14,905 x 55 200 17,355 x 60 200 17,605 x 65 200 24,555 x 70 200 22,905 x 80 200 25,556 x 16 500 6,206 x 20 500 6,206 x 25 500 6,956 x 30 500 7,306 x 35 200 8,056 x 40 200 8,806 x 45 200 9,556 x 50 200 10,056 x 55 200 11,006 x 60 200 11,706 x 65 200 12,456 x 70 200 13,206 x 75 200 14,656 x 80 200 13,906 x 90 100 14,656 x 100 100 15,406 x 110 100 17,606 x 120 100 18,308 x 20 200 11,708 x 25 200 13,208 x 30 200 13,908 x 35 200 15,008 x 40 200 15,408 x 45 200 16,108 x 50 200 16,858 x 55 200 18,308 x 60 200 19,058 x 65 200 20,50
Abmessung VPE Preis €
8 x 70 200 21,258 x 75 200 21,958 x 80 200 22,708 x 90 100 24,208 x 100 100 26,358 x 110 100 27,858 x 120 100 30,058 x 130 100 32,258 x 140 50 34,408 x 150 50 36,608 x 160 50 38,858 x 170 50 43,958 x 180 50 51,258 x 190 50 58,608 x 200 50 65,9010 x 25 200 22,7010 x 30 200 24,2010 x 35 100 25,6510 x 40 100 26,3510 x 45 100 27,8510 x 50 100 29,3010 x 55 100 30,7510 x 60 100 32,2510 x 65 100 33,7010 x 70 100 35,1510 x 75 100 38,1010 x 80 100 38,8510 x 90 100 41,0010 x 100 100 45,4010 x 110 50 47,6010 x 120 50 50,5510 x 130 50 54,9510 x 140 50 58,6010 x 150 50 61,5510 x 160 50 63,0010 x 170 50 69,6010 x 180 50 71,0510 x 190 50 98,9010 x 200 50 109,8510 x 220 50 220,2010 x 240 50 239,15
Abmessung VPE Preis €
10 x 260 50 258,1510 x 280 50 277,2010 x 300 50 297,4012 x 30 100 38,1012 x 35 100 40,3012 x 40 100 43,9512 x 45 100 45,4012 x 50 100 46,9012 x 55 100 81,0012 x 60 100 51,2512 x 65 50 96,9012 x 70 50 54,9512 x 75 50 104,2512 x 80 50 61,5512 x 90 50 64,4512 x 100 50 69,6012 x 110 50 79,3512 x 120 50 79,3512 x 130 50 85,4512 x 140 50 91,5512 x 150 50 97,6512 x 160 25 103,7512 x 170 25 109,8512 x 180 25 116,0012 x 190 25 122,1012 x 200 25 128,2012 x 220 25 188,5012 x 240 25 217,8012 x 260 25 232,7012 x 280 25 250,0512 x 300 25 267,3012 x 320 25 272,6012 x 340 25 308,70
Seite 110 04 / 2019
Preise per 100 Stück
Flachrundschrauben mit Vierkantansatz
Mushroom head square neck bolts
db2dk max.k max.f max.
M 516
13,553,34,1
M 618
16,553,884,6
M 822
20,654,885,6
M 1026
24,655,386,6
M 1230
30,656,958,75
M 1638
38,88,9512,9
blankDIN 603
künftig ISO / EN i08677
A2
Vis à tete bombée à collet carré
-
Abmessung VPE Preis €
5 x 16 200 5,705 x 20 200 6,505 x 30 200 8,105 x 35 200 9,105 x 40 200 9,905 x 45 200 10,755 x 50 200 11,555 x 60 200 13,355 x 65 200 14,155 x 70 200 14,956 x 16 200 9,106 x 20 200 9,906 x 25 200 11,356 x 30 200 12,556 x 35 200 13,756 x 40 200 14,956 x 45 200 16,206 x 50 100 17,606 x 55 100 18,806 x 60 100 19,806 x 65 100 21,256 x 70 100 22,256 x 80 100 23,656 x 90 100 24,856 x 100 100 28,106 x 120 100 34,758 x 20 100 20,008 x 25 100 22,058 x 30 100 24,258 x 35 100 26,508 x 40 100 28,708 x 45 100 30,958 x 50 100 32,958 x 55/55 100 35,158 x 60 100 37,408 x 70 50 41,858 x 80 50 48,108 x 90 50 50,508 x 100 50 54,958 x 110 50 59,408 x 120 50 63,65
Abmessung VPE Preis €
10 x 20 100 49,7010 x 25 100 49,7010 x 30 100 49,7010 x 35 100 57,0010 x 40 100 57,8010 x 45 100 63,2510 x 50 50 66,5010 x 55 50 75,1510 x 60 50 75,1510 x 70 50 84,0510 x 80 50 110,9010 x 90 50 117,8010 x 100 50 127,7010 x 110 50 137,0010 x 120 50 146,0510 x 130 50 154,9512 x 30 50 138,2012 x 40 50 152,7512 x 50 50 167,3012 x 60 50 181,8012 x 70 50 196,3512 x 80 50 211,1012 x 90 50 225,6512 x 100 50 240,2012 x 120 50 269,3012 x 130 50 282,40
Preise per 100 Stück
04 / 2019 Seite 111
Flache Rändelschrauben
Flat knurled thumb screws
ddk Nennmaßk max.
M 3122,5
M 4163,5
M 5204
M 6245
M 8306
M 10368
blankDIN 653
künftig ISO / EN
5.8
Vis moletées
-
Abmessung VPE Preis €
4 x 5 100 55,354 x 6 100 56,954 x 8 100 58,704 x 10 100 61,854 x 12 100 65,154 x 16 100 68,404 x 20 100 86,255 x 8 100 68,405 x 10 100 73,255 x 12 100 74,955 x 16 100 99,305 x 20 100 102,555 x 25 100 123,706 x 10 100 131,806 x 16 100 136,706 x 20 100 149,756 x 25 100 162,756 x 30 100 177,406 x 35 100 203,408 x 12 50 185,508 x 16 50 187,108 x 20 50 203,358 x 25 50 229,408 x 30 50 260,358 x 35 50 305,90
Seite 112 04 / 2019
Preise per 100 Stück
Flache Rändelschrauben
Flat knurled thumb screws
ddk Nennmaßk max.
M 3122,5
M 4163,5
M 5204
M 6245
M 8306
M 10368
verz. blauDIN 653
künftig ISO / EN
5.8
Vis moletées
-
Abmessung VPE Preis €
4 x 5 100 73,704 x 8 100 78,054 x 10 100 82,204 x 12 100 86,654 x 16 100 90,905 x 10 100 97,455 x 12 100 99,655 x 16 100 132,005 x 20 100 136,405 x 25 100 164,506 x 20 100 199,156 x 25 100 216,456 x 30 100 235,908 x 20 100 270,458 x 25 100 305,108 x 30 100 346,308 x 35 100 406,80
Preise per 100 Stück
04 / 2019 Seite 113
Stellringe Form A mit Gewindestiften
Bright set collars light
Innen-ø PassungAußen-ø d2Gewinde d3Breite b
37
M 25
48
M 2,55
510
M 36
612
M 48
816
M 48
1020
M 510
1222
M 612
1425
M 612
1525
M 612
1628
M 612
1832
M 614
2032
M 614
2236
M 614
2440
M 816
2540
M 816
blankDIN 705
künftig ISO / EN
Stahl
Bagues d'arrêt
-
Abmessung VPE Preis €
A 5 100 103,05A 6 100 103,05A 8 50 114,25A 10 50 130,20A 12 50 149,65A 14 50 165,75A 15 50 165,75A 16 50 184,55A 18 25 217,60A 20 25 217,60A 22 25 272,00A 24 25 320,55A 25 25 320,55A 28 25 394,35A 30 25 394,35A 32 5 476,05A 34 5 476,05A 35 5 538,20A 36 5 538,20A 38 5 538,20A 40 5 831,80A 45 5 997,25A 50 5 1268,55
Seite 114 04 / 2019
Preise per 100 Stück
Stellringe Form A mit Gewindestiften, verzinkt
Bright set collars light
Innen-ø PassungAußen-ø d2Gewinde d3Breite b
37
M 25
48
M 2,55
510
M 36
612
M 48
816
M 48
1020
M 510
1222
M 612
1425
M 612
1525
M 612
1628
M 612
1832
M 614
2032
M 614
2236
M 614
2440
M 816
2540
M 816
verz. blauDIN 705
künftig ISO / EN
Stahl
Bagues d'arrêt
-
Abmessung VPE Preis €
A 6 100 137,35A 8 100 152,25A 9 100 173,65A 10 50 173,60A 12 50 199,50A 15 50 221,00A 16 50 245,95A 18 25 273,70A 20 25 290,15A 20 25 303,95A 24 25 427,40A 25 25 427,25A 28 25 525,80A 30 25 525,70A 40 10 1108,90A 45 5 1329,60A 50 5 1691,30
Preise per 100 Stück
04 / 2019 Seite 115
Stellringe Form A mit Gewindestiften, A2
Bright set collars light
Innen-ø PassungAußen-ø d2Gewinde d3Breite b
510
M 36
612
M 48
816
M 48
1020
M 510
1222
M 612
1425
M 612
1525
M 612
1628
M 612
1832
M 614
2032
M 614
2236
M 614
2440
M 816
2540
M 816
2845
M 816
3045
M 816
blankDIN 705
künftig ISO / EN
A2
Bagues d'arrêt
-
Abmessung VPE Preis €
A 5 100 114,65A 6 100 127,55A 8 100 146,70A 10 50 181,25A 11 50 181,25A 12 50 224,15A 14 50 259,75A 15 50 259,75A 16 50 320,70A 18 25 419,35A 20 25 419,35A 22 25 574,25A 25 25 653,25A 30 25 774,65A 35 10 1208,40A 40 10 1760,95A 45 5 2261,85A 50 5 3077,80
Seite 116 04 / 2019
Preise per 100 Stück
Verschlußschrauben mit Innensechskant
Withworth-Rohrgbst min.
1/8844
1/41075
3/81085
1/210105
3/412126
112176
11/41822
11,5
11/22024
11,5
blankDIN 906
künftig ISO / EN
5.8-
Abmessung VPE Preis €
R 1/8 100 47,95R 1/4 50 63,40R 3/8 50 80,40R 1/2 25 112,85R 3/4 25 191,45R 1 10 276,85R 1 1/2 10 1029,50
Preise per 100 Stück
04 / 2019 Seite 117
Verschlußschrauben mit Innensechskant
Metrisches fein xbst min.
8x1844
10x1854
121065
141075
161085
181085
2010105
2210105
2412126
3012176
3615197,5
blankDIN 906
künftig ISO / EN
5.8-
Abmessung VPE Preis €
M 8 x 1 100 44,55M 10 x 1 100 47,95M 12 x 1,5 100 57,30M 14 x 1,5 50 63,20M 16 x 1,5 50 74,30M 18 x 1,5 50 94,05M 20 x 1,5 25 107,70M 22 x 1,5 25 119,75M 24 x 1,5 25 136,10M 26 x 1,5 25 189,60
Seite 118 04 / 2019
Preise per 100 Stück
Verschlußschrauben mit Innensechskant
Withworth-Rohrgbst min.
1/8844
1/41075
3/81085
1/210105
3/412126
112176
11/41822
11,5
11/22024
11,5
verz. blauDIN 906
künftig ISO / EN
5.8-
Abmessung VPE Preis €
R 1/8 100 63,85R 1/4 50 84,50R 1/2 25 150,55
Preise per 100 Stück
04 / 2019 Seite 119
Verschlußschrauben mit Innensechskant
Metrisches fein xbst min.
8x1844
10x1854
121065
141075
161085
181085
2010105
2210105
2412126
3012176
3615197,5
verz. blauDIN 906
künftig ISO / EN
5.8-
Abmessung VPE Preis €
M 8 x 1 100 59,35M 10 x 1 100 63,95M 12 x 1,5 100 76,40M 16 x 1,5 50 99,05M 18 x 1,5 50 111,95M 22 x 1,5 50 159,60
Seite 120 04 / 2019
Preise per 100 Stück
Verschlußschrauben mit Bund und Innensechskant, zy
Rohrgewinde d1cd2il
1/83
148
11
1/43
181215
3/83
221215
1/24
261418
3/44
321620
15
391621
11/45
491621
11/25
551621
25
682025
blankDIN 908
künftig ISO / EN
5.8-
Abmessung VPE Preis €
G 1/8 100 52,90G 1/4 50 93,50G 3/8 50 127,05G 1/2 25 146,15G 3/4 25 257,60G 1 10 432,30G 11/4 10 820,75G 11/2 10 1032,30G 2 1 1972,45
Preise per 100 Stück
04 / 2019 Seite 121
Verschlußschrauben mit Bund und Innensechskant, zy
Metrisches Feingcd2il
10x13
148
11
123
171215
143
191215
163
211215
184
231216
204
251418
224
271418
244
291418
264
311620
304
361620
365
421621
blankDIN 908
künftig ISO / EN
5.8-
Abmessung VPE Preis €
M 10 x 1 100 56,15M 12 x 1,5 100 83,40M 14 x 1,5 50 99,30M 16 x 1,5 50 122,30M 18 x 1,5 50 137,50M 20 x 1,5 25 154,60M 22 x 1,5 25 184,85M 24 x 1,5 25 214,90M 26 x 1,5 25 257,60M 27 x 2 25 298,60M 30 x 1,5 10 324,95M 33 x 2 10 450,70M 36 x 1,5 10 682,95M 42 x 1,5 1 911,40M 42 x 2 1 911,40M 48 x 1,5 1 1162,75
Seite 122 04 / 2019
Preise per 100 Stück
Verschlußschrauben mit Bund und Innensechskant, zy
Rohrgewinde d1cd2il
1/83
148
11
1/43
181215
3/83
221215
1/24
261418
3/44
321620
15
391621
11/45
491621
11/25
551621
25
682025
verz. blauDIN 908
künftig ISO / EN
5.8-
Abmessung VPE Preis €
G 1/8 100 74,10G 1/4 50 124,75G 3/8 50 169,35G 1/2 25 194,80G 3/4 25 343,45G 1 10 558,15
Preise per 100 Stück
04 / 2019 Seite 123
Verschlußschrauben mit Bund und Innensechskant, zy
Metrisches Feingcd2il
10x13
148
11
123
171215
143
191215
163
211215
184
231216
204
251418
224
271418
244
291418
264
311620
304
361620
365
421621
verz. blauDIN 908
künftig ISO / EN
5.8-
Abmessung VPE Preis €
M 10 x 1 100 74,75M 12 x 1,5 100 111,15M 14 x 1,5 50 132,40M 16 x 1,5 50 163,05M 18 x 1,5 50 183,35M 22 x 1,5 25 246,40M 24 x 1,5 25 276,00M 30 x 1,5 10 433,20
Seite 124 04 / 2019
Preise per 100 Stück
Verschlußschrauben mit Bund und Außensechskant
Rohrgewinde d1cd2il
1/83
148
17
1/43
181221
3/83
221221
1/24
261426
3/44
321630
15
391632
11/45
491633
11/25
551633
25
682040
blankDIN 910
künftig ISO / EN
5.8-
Abmessung VPE Preis €
G 1/8 50 77,65G 1/4 50 111,15G 3/8 50 141,90G 1/2 50 176,20G 3/4 50 318,30G 1 10 422,60G 1 1/4 20 1081,05G 1 1/2 50 1379,80
Preise per 100 Stück
04 / 2019 Seite 125
Verschlußschrauben mit Bund und Außensechskant
Metrisches Feingcd2il
10x112x1,514x1,516x1,518x1,520x1,522x1,524x1,5 27x2 30x2 36x2
blankDIN 910
künftig ISO / EN
5.8-
Abmessung VPE Preis €
M 10 x 1 50 77,65M 12 x 1,5 100 108,20M 14 x 1,5 50 129,80M 16 x 1,5 50 138,20M 18 x 1,5 50 162,75M 20 x 1,5 50 175,40M 22 x 1,5 50 216,30M 24 x 1,5 25 285,30M 27 x 2 50 392,20M 36 x 2 50 735,65
Seite 126 04 / 2019
Preise per 100 Stück
Verschlußschrauben mit Bund und Außensechskant
Rohrgewinde d1cd2il
1/83
148
17
1/43
181221
3/83
221221
1/24
261426
3/44
321630
15
391632
11/45
491633
11/25
551633
25
682040
verz. blauDIN 910
künftig ISO / EN
5.8-
Abmessung VPE Preis €
G 1/8 100 103,55G 1/4 50 148,20G 3/8 50 189,20G 1/2 25 234,85G 3/4 25 424,40G 1 10 563,50G 1 1/4 10 1441,30G 1 1/2 10 1839,65G 2 10 3106,95
Preise per 100 Stück
04 / 2019 Seite 127
Verschlußschrauben mit Bund und Außensechskant
Metrisches Feingcd2il
10x112x1,514x1,516x1,518x1,520x1,522x1,524x1,5 27x2 30x2 36x2
verz. blauDIN 910
künftig ISO / EN
5.8-
Abmessung VPE Preis €
M 10 x 1 100 103,55M 12 x 1,5 100 144,25M 14 x 1,5 50 172,55M 16 x 1,5 50 184,20M 18 x 1,5 50 204,70M 22 x 1,5 25 288,35
Seite 128 04 / 2019
Preise per 100 Stück
Sechskantstiftschlüssel vergütet
Socket wrenches
sl 1l 2
1,54514
25016
2,55618
36320
47125
58028
69032
79534
810036
1011240
1212545
1414055
1716060
1918070
2220080
brüniertDIN 911
künftig ISO / EN
10.9
Clés mâles condées pour vis à six pans creux
-
Abmessung VPE Preis €
SW 1,5 100 25,85SW 2 100 33,10SW 2,5 100 37,15SW 3 100 41,15SW 4 50 45,45SW 5 50 55,60SW 6 50 75,95SW 7 1 122,65SW 8 1 130,10SW 10 1 209,55SW 12 1 306,15SW 14 1 438,95SW 17 1 751,35SW 19 1 1107,10
Preise per 100 Stück
04 / 2019 Seite 129
Flachkopfschrauben mit Schlitz und Ansatz
Slotted pan head screws with shoulder
dbdk max. (h9)ds max.k Nennmaß
M 34,5
74
1,8
M 46
8,55,52,4
M 57
117
2,7
M 69
138
3,1
M 81116103,8
M 1013,5
20134,6
blankDIN 923
künftig ISO / EN
5.8
Vis à tête aplatie, fendue, épaulement
-
Abmessung VPE Preis €
3 x 1,6 100 14,903 x 5 100 15,703 x 6 100 18,103 x 8 100 19,303 x 10 100 24,204 x 2,5 100 16,254 x 3 100 17,454 x 4 100 17,754 x 5 100 18,104 x 6 100 19,304 x 8 100 22,154 x 10 100 23,004 x 12 100 26,154 x 16 100 28,805 x 3 100 22,255 x 4 100 23,455 x 5 100 23,755 x 6 100 24,305 x 8 100 38,555 x 10 100 39,905 x 12 100 46,505 x 16 100 58,506 x 5 100 35,606 x 6 100 37,056 x 8 100 44,706 x 16 100 50,306 x 16 100 62,256 x 20 100 75,558 x 5 50 51,258 x 6 50 52,458 x 8 50 54,658 x 12 50 63,008 x 16 50 98,358 x 25 50 126,75
Seite 130 04 / 2019
Preise per 100 Stück
Vierkant-Schweißmuttern
Square weld nuts
d1be min.hm
M 40,8
90,63,5
M 51
120,84,2
M 61,2130,8
5
M 81,5181
6,5
M 101,8221,2
8
M 122
251,49,5
blankDIN 928
künftig ISO / EN
8
Ecrous carrés à souder
-
Abmessung VPE Preis €
6 1000 5,008 1000 11,7010 500 17,7012 100 28,10
Preise per 100 Stück
04 / 2019 Seite 131
Sechskant-Schweißmuttern
Hexagon weld nuts
d1d2h1h2m
M 34,5
0,550,25
3
M 46
0,650,353,5
M 57
0,70,4
4
M 68
0,750,4
5
M 810,50,90,56,5
M 1012,51,150,65
8
M 1214,81,40,810
M 1416,81,8
111
M 1618,81,8
113
blankDIN 929
künftig ISO / EN
8
Ecrous six-pans à souder
-
Abmessung VPE Preis €
3 1000 3,804 1000 3,305 1000 3,406 1000 4,108 1000 6,8010 500 9,1012 100 15,0016 100 35,90
Seite 132 04 / 2019
Preise per 100 Stück
Sechskant-Schweißmuttern
Hexagon weld nuts
d1d2h1h2m
M 34,5
0,550,25
3
M 46
0,650,353,5
M 57
0,70,4
4
M 68
0,750,4
5
M 810,50,90,56,5
M 1012,51,150,65
8
M 1214,81,40,810
M 1618,81,8
113
blankDIN 929
künftig ISO / EN
A2
Ecrous six-pans à souder
-
Abmessung VPE Preis €
3 1000 27,154 1000 28,155 1000 32,556 500 45,458 200 47,5510 100 68,2012 100 123,9516 50 214,35
Preise per 100 Stück
04 / 2019 Seite 133
Sechskantschrauben mit Schaft
Hexagon head bolts
db2 bis125 mmb3 bis 200 mmb4 über 200 mmk Nennmaß
M 414
--
2,8
M 51622
-3,5
M 61824
-4
M 82228
-5,3
M 102632456,4
M 123036497,5
M 143440538,8
M 1638445710
M 18424861
11,5
M 20465265
12,5
M 2250566914
M 2454607315
M 2760667917
M 30667285
18,7
M 36788497
22,5
brüniertDIN 931
künftig ISO / EN i04014
8.8
Vis à tête hexagonale
-
Abmessung VPE Preis €
4 x 25 500 14,054 x 30 500 13,654 x 35 500 15,704 x 40 500 16,154 x 45 500 16,904 x 50 500 18,304 x 60 500 64,305 x 25 500 7,755 x 30 500 11,555 x 35 200 11,555 x 40 200 11,555 x 45 200 12,755 x 50 200 14,055 x 55 200 15,255 x 60 200 16,555 x 65 200 27,905 x 70 200 29,005 x 80 200 35,106 x 30 500 7,656 x 35 200 8,606 x 40 200 9,806 x 45 200 10,906 x 50 200 11,656 x 55 200 12,756 x 60 200 13,656 x 65 200 16,356 x 70 200 17,356 x 80 200 20,706 x 85 100 20,706 x 90 100 21,806 x 100 100 24,206 x 110 100 29,756 x 120 100 32,606 x 130 100 40,108 x 35 200 14,308 x 40 200 15,908 x 45 200 17,458 x 50 200 18,958 x 55 200 20,258 x 60 200 21,808 x 65 200 25,60
Abmessung VPE Preis €
8 x 70 200 27,358 x 75 200 29,008 x 80 200 30,758 x 85 100 32,608 x 90 100 34,458 x 95 100 36,108 x 100 100 37,608 x 110 100 45,458 x 120 100 50,458 x 130 100 58,308 x 140 50 62,708 x 150 50 75,208 x 160 50 94,058 x 170 50 110,958 x 180 50 114,1010 x 40 100 27,2510 x 45 100 29,5510 x 50 100 32,2510 x 55 100 34,4510 x 60 100 36,6010 x 65 100 38,9010 x 70 100 41,6510 x 75 100 43,9510 x 80 100 46,1010 x 85 100 53,6510 x 90 100 56,4510 x 100 100 61,7010 x 110 50 67,7010 x 120 50 72,7010 x 130 50 85,9010 x 140 50 92,1010 x 160 50 104,1010 x 170 50 109,6510 x 180 50 115,3010 x 190 50 135,4010 x 200 50 141,0510 x 220 25 235,6512 x 45 100 41,9512 x 50 100 45,1512 x 55 100 48,9512 x 60 100 52,00
Abmessung VPE Preis €
12 x 65 50 54,8512 x 70 50 58,3012 x 75 50 61,7012 x 80 50 65,2012 x 85 50 69,0012 x 90 50 72,0512 x 100 50 78,3512 x 110 50 94,0512 x 120 50 101,6012 x 130 50 121,6512 x 140 50 129,7012 x 150 50 138,5512 x 160 25 145,4012 x 180 25 162,9512 x 190 25 189,9012 x 200 25 199,3512 x 210 25 267,0512 x 220 25 279,6012 x 240 25 303,3514 x 50 50 70,8514 x 55 50 75,8514 x 60 50 81,5514 x 65 50 85,2514 x 70 50 90,2514 x 75 50 95,9014 x 80 50 100,9514 x 90 50 109,6514 x 100 50 120,3514 x 110 50 143,5514 x 120 50 156,1014 x 130 50 183,0014 x 140 25 194,9014 x 150 25 209,4014 x 160 25 221,9014 x 170 25 233,1514 x 180 25 244,5014 x 200 25 388,6016 x 55 50 89,6016 x 60 50 95,9016 x 65 25 102,1516 x 70 25 108,45
Seite 134 04 / 2019
Preise per 100 Stück
Sechskantschrauben mit Schaft
Hexagon head bolts
db2 bis125 mmb3 bis 200 mmb4 über 200 mmk Nennmaß
M 414
--
2,8
M 51622
-3,5
M 61824
-4
M 82228
-5,3
M 102632456,4
M 123036497,5
M 143440538,8
M 1638445710
M 18424861
11,5
M 20465265
12,5
M 2250566914
M 2454607315
M 2760667917
M 30667285
18,7
M 36788497
22,5
brüniertDIN 931
künftig ISO / EN i04014
8.8
Vis à tête hexagonale
-
Abmessung VPE Preis €
16 x 75 25 114,6516 x 80 25 121,0016 x 90 25 133,5516 x 95 25 139,7516 x 100 25 144,7516 x 110 25 174,3016 x 120 25 188,0516 x 130 25 219,4016 x 140 25 234,4516 x 150 25 249,5016 x 160 25 265,7516 x 170 25 280,8016 x 180 25 295,8516 x 190 25 310,8516 x 200 25 325,9016 x 220 25 445,0516 x 240 25 482,6518 x 60 25 138,5518 x 65 25 147,9018 x 70 25 156,1018 x 75 25 164,8018 x 80 25 173,0018 x 90 25 189,9018 x 100 25 206,9018 x 110 25 248,2018 x 120 25 267,6018 x 130 25 310,8518 x 140 25 335,3018 x 150 25 354,1518 x 160 25 376,0518 x 180 25 416,8020 x 65 25 170,5020 x 70 25 180,5020 x 75 25 189,9020 x 80 25 199,3520 x 85 25 208,1020 x 90 25 218,1020 x 95 25 227,5020 x 100 25 236,3020 x 110 25 282,1020 x 120 25 302,15
Abmessung VPE Preis €
20 x 130 25 357,3020 x 140 25 382,3520 x 150 25 404,3020 x 160 10 426,2020 x 170 10 448,1020 x 180 10 473,1520 x 190 10 495,2020 x 200 10 517,1020 x 220 10 701,9520 x 240 10 761,4520 x 250 10 789,7020 x 260 10 821,1020 x 270 10 968,3520 x 280 10 1002,8020 x 290 10 1034,2020 x 300 10 1068,6522 x 70 25 562,9022 x 75 25 503,6022 x 80 25 584,3522 x 85 25 544,3522 x 90 25 609,1022 x 95 10 591,0022 x 100 10 659,9022 x 110 10 712,3022 x 120 10 763,2022 x 130 10 814,0022 x 140 10 814,0022 x 150 10 963,6522 x 160 10 1083,9022 x 170 10 1362,9522 x 180 10 1362,9522 x 190 10 1635,8522 x 200 10 1720,6522 x 220 10 1941,2022 x 240 10 2163,2022 x 250 10 2251,0522 x 260 10 2658,0522 x 280 10 2964,9022 x 300 10 3274,8024 x 75 25 322,7524 x 80 25 338,45
Abmessung VPE Preis €
24 x 85 10 354,1524 x 90 10 369,8524 x 95 10 385,4024 x 100 10 401,1024 x 110 10 432,5024 x 120 10 460,6524 x 130 10 535,8524 x 140 10 570,4024 x 150 10 601,7024 x 160 10 636,1024 x 170 10 670,7024 x 180 10 701,9524 x 190 10 736,4024 x 200 10 767,8024 x 210 10 993,4524 x 220 10 1031,0524 x 230 10 1074,8524 x 250 10 1153,2024 x 260 10 1184,6024 x 270 10 1403,9024 x 280 10 1447,8524 x 290 10 1498,0024 x 300 10 1541,8027 x 80 10 539,0027 x 90 10 589,1527 x 100 10 636,1027 x 110 10 686,2527 x 120 10 733,3527 x 130 10 758,4027 x 140 10 802,2527 x 150 10 852,4027 x 160 10 899,3527 x 170 10 949,5027 x 180 10 996,6027 x 190 10 1040,4027 x 200 10 1087,4027 x 220 10 1341,2527 x 240 10 1441,5527 x 260 10 1548,1527 x 280 10 1892,8027 x 300 10 2011,90
Preise per 100 Stück
04 / 2019 Seite 135
Sechskantschrauben mit Schaft
Hexagon head bolts
db2 bis125 mmb3 bis 200 mmb4 über 200 mmk Nennmaß
M 414
--
2,8
M 51622
-3,5
M 61824
-4
M 82228
-5,3
M 102632456,4
M 123036497,5
M 143440538,8
M 1638445710
M 18424861
11,5
M 20465265
12,5
M 2250566914
M 2454607315
M 2760667917
M 30667285
18,7
M 36788497
22,5
brüniertDIN 931
künftig ISO / EN i04014
8.8
Vis à tête hexagonale
-
Abmessung VPE Preis €
30 x 100 10 805,4030 x 110 10 864,9030 x 120 10 921,4030 x 130 10 968,3530 x 140 10 1027,8530 x 150 10 1081,1530 x 160 10 1140,7030 x 170 10 1200,2030 x 180 10 1266,0530 x 190 10 1316,2030 x 200 10 1378,8530 x 210 10 1617,0030 x 220 10 1679,7030 x 230 10 1748,7030 x 240 10 1874,0530 x 250 10 1874,0530 x 260 10 1942,9530 x 270 10 2287,7030 x 280 10 2356,6030 x 300 10 2513,3033 x 100 10 1992,1033 x 110 10 2112,3033 x 120 10 2217,0533 x 130 10 2320,5033 x 140 10 2429,9533 x 150 10 2517,8033 x 160 10 2978,8533 x 180 10 3066,7033 x 200 10 3151,4033 x 220 10 3243,9533 x 240 10 3455,2033 x 260 10 4031,9033 x 280 10 4229,2033 x 300 10 4428,1536 x 110 5 2166,2536 x 120 5 2281,9036 x 130 5 2328,1536 x 140 5 2328,1536 x 150 5 2482,2536 x 160 5 2960,2036 x 170 5 3157,60
Abmessung VPE Preis €
36 x 180 5 3157,6036 x 190 5 3268,6036 x 200 5 3268,6036 x 220 5 3422,8036 x 240 5 3654,1036 x 250 5 4645,4536 x 260 5 3947,0036 x 280 5 4024,0536 x 300 5 4224,50
Seite 136 04 / 2019
Preise per 100 Stück
Sechskantschrauben mit Schaft
Hexagon head bolts
db2 bis125 mmb3 bis 200 mmb4 über 200 mmk Nennmaß
M 414
--
2,8
M 51622
-3,5
M 61824
-4
M 82228
-5,3
M 102632456,4
M 123036497,5
M 143440538,8
M 1638445710
M 18424861
11,5
M 20465265
12,5
M 2250566914
M 2454607315
M 2760667917
M 30667285
18,7
M 36788497
22,5
verz. blauDIN 931
künftig ISO / EN i04014
8.8
Vis à tête hexagonale
-
Abmessung VPE Preis €
5 x 30 500 10,455 x 35 200 12,005 x 40 200 13,405 x 45 200 14,955 x 50 200 16,255 x 55 200 17,905 x 60 200 19,305 x 65 200 24,405 x 70 200 26,056 x 30 500 9,056 x 35 200 10,256 x 40 200 11,456 x 45 200 12,756 x 50 200 13,856 x 55 200 14,956 x 60 200 16,006 x 65 200 18,956 x 70 200 20,156 x 75 200 21,606 x 80 200 22,806 x 85 100 24,206 x 90 100 25,506 x 100 100 28,256 x 110 100 34,756 x 120 100 37,956 x 130 100 46,758 x 35 200 16,808 x 40 200 18,758 x 45 200 20,408 x 50 200 22,358 x 55 200 24,008 x 60 200 25,708 x 65 200 30,108 x 70 200 32,158 x 75 200 34,108 x 80 200 36,208 x 85 100 38,258 x 90 100 40,008 x 95 100 42,508 x 100 100 44,258 x 105 100 51,00
Abmessung VPE Preis €
8 x 110 100 53,208 x 120 100 57,758 x 130 50 68,008 x 140 50 73,708 x 150 50 87,858 x 160 50 93,508 x 170 50 128,958 x 180 50 131,808 x 200 50 141,7010 x 40 100 29,6510 x 45 100 32,2510 x 50 100 35,0010 x 55 100 37,6010 x 60 100 39,9010 x 65 100 42,8510 x 70 100 45,4510 x 75 100 48,0510 x 80 100 51,0010 x 85 100 58,5510 x 90 100 61,5010 x 95 100 64,4010 x 100 100 67,3510 x 110 50 73,2510 x 120 50 79,1510 x 130 50 93,5010 x 140 50 100,0510 x 150 50 106,6010 x 160 50 113,1510 x 170 50 119,0510 x 180 50 125,5510 x 190 50 145,2010 x 200 50 151,7510 x 220 50 251,8012 x 40 100 40,9012 x 45 100 45,8012 x 50 100 49,7012 x 55 100 57,2512 x 60 100 57,2512 x 65 50 59,8512 x 70 50 63,7512 x 75 50 67,35
Abmessung VPE Preis €
12 x 80 50 71,9512 x 85 50 75,2012 x 90 50 79,1512 x 100 50 86,3512 x 110 50 102,0012 x 120 50 110,5512 x 130 50 131,4512 x 140 50 140,6012 x 150 50 149,7512 x 160 25 158,2512 x 170 25 167,4012 x 180 25 175,9512 x 190 25 204,0512 x 200 25 285,8014 x 50 50 77,1514 x 55 50 82,4014 x 60 50 88,3014 x 65 50 92,8514 x 70 50 98,7514 x 75 50 104,0014 x 80 50 109,8514 x 90 50 119,0514 x 100 50 130,1514 x 110 50 156,3014 x 120 50 169,4014 x 130 50 197,5014 x 140 25 210,6014 x 150 25 226,3014 x 160 25 240,0014 x 170 25 251,8014 x 180 25 263,5516 x 50 50 108,5516 x 55 50 98,7516 x 60 50 104,6516 x 65 25 111,8516 x 70 25 118,3516 x 75 25 125,5516 x 80 25 132,1016 x 85 25 139,3016 x 90 25 145,8516 x 95 25 153,05
Preise per 100 Stück
04 / 2019 Seite 137
Sechskantschrauben mit Schaft
Hexagon head bolts
db2 bis125 mmb3 bis 200 mmb4 über 200 mmk Nennmaß
M 414
--
2,8
M 51622
-3,5
M 61824
-4
M 82228
-5,3
M 102632456,4
M 123036497,5
M 143440538,8
M 1638445710
M 18424861
11,5
M 20465265
12,5
M 2250566914
M 2454607315
M 2760667917
M 30667285
18,7
M 36788497
22,5
verz. blauDIN 931
künftig ISO / EN i04014
8.8
Vis à tête hexagonale
-
Abmessung VPE Preis €
16 x 100 25 158,2516 x 110 25 189,0016 x 120 25 204,0516 x 130 25 237,4016 x 140 25 253,7516 x 150 25 270,1016 x 160 25 286,4516 x 170 25 302,8016 x 180 25 319,8016 x 190 25 336,8016 x 200 25 353,1516 x 220 25 477,4016 x 230 25 497,0516 x 240 25 519,9516 x 280 25 680,1516 x 300 25 725,9518 x 65 25 160,2518 x 70 25 170,0518 x 75 25 178,5518 x 80 25 187,0518 x 90 25 205,3518 x 100 25 225,0018 x 110 25 268,1518 x 120 25 288,4018 x 130 25 336,8018 x 140 25 372,8018 x 150 25 382,6018 x 160 25 405,5020 x 60 25 178,5520 x 65 25 186,4020 x 70 25 196,8520 x 75 25 206,6520 x 80 25 217,1520 x 85 25 227,6020 x 90 25 237,4020 x 100 25 257,7020 x 110 25 306,0520 x 120 25 330,2520 x 130 25 385,8520 x 140 25 412,0020 x 150 25 438,20
Abmessung VPE Preis €
20 x 160 10 461,0520 x 170 10 490,5020 x 180 10 513,4020 x 190 10 536,3020 x 200 10 565,7020 x 220 10 755,3520 x 240 10 820,7520 x 250 10 852,4020 x 260 10 882,9020 x 280 10 1075,8520 x 300 10 1147,7522 x 70 25 319,1522 x 90 25 389,1522 x 100 25 421,8522 x 200 25 843,6524 x 70 25 333,5524 x 75 25 349,9024 x 80 25 369,5024 x 85 10 385,8524 x 90 10 402,2024 x 100 10 434,9024 x 110 10 467,6024 x 120 10 500,3024 x 130 10 578,8024 x 140 10 614,7524 x 150 10 650,7524 x 160 10 686,7024 x 170 10 722,6524 x 180 10 761,9024 x 190 10 794,6024 x 200 10 833,8524 x 220 10 1108,5524 x 240 10 1190,3024 x 250 10 1236,0524 x 260 10 1278,5524 x 280 10 1556,5024 x 300 10 1661,1527 x 80 10 582,0527 x 90 10 634,4027 x 100 10 683,4527 x 110 10 739,00
Abmessung VPE Preis €
27 x 120 10 791,3527 x 130 10 817,5027 x 140 10 869,8027 x 150 10 922,1527 x 160 10 971,2027 x 180 10 1072,5527 x 200 10 1167,4027 x 220 10 1438,8027 x 240 10 1556,5027 x 260 10 1674,2527 x 280 10 2020,8527 x 300 10 2151,6530 x 90 10 807,7030 x 100 10 869,8030 x 110 10 935,2030 x 120 10 1000,6030 x 130 10 1046,4030 x 140 10 1108,5530 x 150 10 1167,4030 x 160 10 1229,5030 x 180 10 1360,3030 x 200 10 1491,1030 x 220 10 1811,6030 x 240 10 1948,9030 x 280 10 2531,0030 x 300 10 2687,95
Seite 138 04 / 2019
Preise per 100 Stück
Sechskantschrauben mit Schaft
Hexagon head bolts
db2 bis125 mmb3 bis 200 mmb4 über 200 mmk Nennmaß
M 61824
-4
M 82228
-5,3
M 102632456,4
M 123036497,5
M 143440538,8
M 1638445710
M 18424861
11,5
M 20465265
12,5
M 2454607315
M 2760667917
M 30667285
18,7
M 36788497
22,5
brüniertDIN 931
künftig ISO / EN i04014
10.9
Vis à tête hexagonale
-
Abmessung VPE Preis €
6 x 30 500 11,646 x 35 200 12,126 x 40 200 13,566 x 45 200 16,686 x 50 200 18,726 x 60 200 21,426 x 80 200 30,006 x 90 200 33,066 x 100 100 38,406 x 110 100 66,488 x 35 200 21,968 x 40 200 24,308 x 45 200 34,688 x 50 200 29,348 x 55 200 31,088 x 60 200 33,548 x 65 200 35,648 x 70 200 38,108 x 75 200 39,968 x 80 200 42,908 x 90 100 53,588 x 100 100 61,808 x 110 100 87,608 x 120 100 71,4010 x 35 100 34,4410 x 40 100 33,7210 x 45 100 36,3610 x 50 100 43,4410 x 55 100 42,7210 x 60 100 47,0410 x 65 100 47,8210 x 70 100 53,8210 x 75 100 56,8810 x 80 100 60,0010 x 90 100 64,8010 x 100 100 69,3610 x 110 50 105,6010 x 120 50 112,9210 x 130 50 109,0210 x 140 50 132,1210 x 150 50 177,96
Abmessung VPE Preis €
10 x 170 50 237,4810 x 180 50 295,0810 x 220 50 454,2612 x 40 100 57,1812 x 45 100 54,3012 x 50 100 59,2812 x 55 100 69,6012 x 60 100 67,0812 x 65 50 74,7012 x 70 50 78,4812 x 75 50 83,5212 x 80 50 87,9612 x 85 50 93,9612 x 90 50 97,5012 x 100 50 104,2812 x 110 50 109,8612 x 120 50 122,8212 x 130 50 183,3612 x 140 50 197,3412 x 150 50 179,6412 x 160 25 248,2212 x 180 25 271,1412 x 190 25 249,2412 x 200 25 334,9212 x 240 25 474,0614 x 50 50 88,1414 x 55 50 82,4414 x 60 50 111,8414 x 70 50 120,9014 x 80 50 135,6614 x 90 50 133,7414 x 100 50 143,7014 x 110 50 166,4414 x 120 50 185,5814 x 130 50 205,6814 x 140 25 225,1814 x 150 25 262,1414 x 160 25 364,6814 x 180 25 414,5414 x 200 25 421,0216 x 55 50 119,22
Abmessung VPE Preis €
16 x 60 50 133,5616 x 65 25 144,4816 x 70 25 132,9016 x 75 25 145,2616 x 80 25 166,2616 x 90 25 163,0216 x 100 25 195,7216 x 110 25 196,7416 x 120 25 268,4416 x 130 25 288,3016 x 140 25 265,2616 x 150 25 263,1616 x 150 25 286,9216 x 150 25 297,9016 x 150 25 298,2616 x 150 25 355,2016 x 150 25 351,6016 x 220 25 542,6416 x 240 25 589,8016 x 260 25 540,2416 x 280 25 1013,1616 x 300 1 820,3820 x 65 25 300,7820 x 70 25 278,2220 x 75 25 238,9220 x 80 25 265,5620 x 90 25 291,1820 x 100 25 318,4220 x 110 25 342,4220 x 120 25 360,2420 x 130 25 435,3620 x 140 25 411,1820 x 150 25 426,3620 x 160 10 563,3420 x 170 10 595,3820 x 180 10 489,7820 x 190 1 520,8620 x 200 1 539,5220 x 220 1 923,4620 x 240 1 983,1020 x 260 1 1149,96
Preise per 100 Stück
04 / 2019 Seite 139
Sechskantschrauben mit Schaft
Hexagon head bolts
db2 bis125 mmb3 bis 200 mmb4 über 200 mmk Nennmaß
M 61824
-4
M 82228
-5,3
M 102632456,4
M 123036497,5
M 143440538,8
M 1638445710
M 18424861
11,5
M 20465265
12,5
M 2454607315
M 2760667917
M 30667285
18,7
M 36788497
22,5
brüniertDIN 931
künftig ISO / EN i04014
10.9
Vis à tête hexagonale
-
Abmessung VPE Preis €
20 x 280 1 1140,4220 x 300 1 1223,2220 x 330 1 1677,8420 x 340 1 2034,0620 x 400 1 2240,1022 x 100 10 493,7424 x 75 25 372,6624 x 80 25 448,3224 x 90 10 417,3024 x 100 10 448,0824 x 110 10 516,7824 x 120 10 629,2224 x 130 10 541,8024 x 140 10 568,3824 x 150 10 620,7024 x 160 10 656,8824 x 170 1 670,7424 x 180 1 761,2224 x 190 1 942,0624 x 200 1 987,3624 x 220 1 1750,6224 x 240 1 1366,0824 x 260 1 1616,4024 x 280 1 1724,5824 x 300 1 2036,3427 x 180 1 1572,1827 x 200 1 1561,1430 x 120 1 1301,1030 x 140 1 1463,9430 x 150 1 1545,3630 x 180 1 1789,7436 x 140 1 2512,8036 x 200 1 3312,0042 x 240 1 5980,32
Seite 140 04 / 2019
Preise per 100 Stück
Sechskantschrauben mit Schaft
Hexagon head bolts
db2b3b4k Nennmaß
M 51622
-3,5
M 61824
-4
M 82228
-5,3
M 102632456,4
M 123036497,5
M 143440538,8
M 1638445710
M 18424861
11,5
M 20465265
12,5
M 2250566914
M 2454607315
M 2760667917
M 30667285
18,7
M 36788497
22,5
blankDIN 931
künftig ISO / EN i04014
A2
Vis à tête hexagonale
-
Abmessung VPE Preis €
5 x 30 200 15,805 x 35 200 16,905 x 40 200 20,805 x 50 200 25,505 x 55 200 29,706 x 30 200 15,106 x 35 200 17,706 x 40 200 19,106 x 45 100 21,006 x 50 100 24,606 x 55 100 25,806 x 60 100 27,306 x 65 100 32,406 x 70 100 33,406 x 80 100 42,006 x 90 100 43,206 x 100 100 46,106 x 110 100 63,806 x 120 100 77,206 x 130 100 79,906 x 140 100 116,606 x 150 100 138,808 x 35 100 29,008 x 40 100 34,608 x 45 100 36,608 x 50 100 41,508 x 55 100 44,808 x 60 100 46,208 x 65 100 50,708 x 70 50 58,708 x 75 50 61,808 x 80 50 65,408 x 90 50 67,508 x 100 50 69,408 x 110 50 96,608 x 120 50 99,708 x 130 50 124,208 x 140 50 126,608 x 150 50 143,308 x 160 25 179,508 x 180 25 244,20
Abmessung VPE Preis €
8 x 200 25 481,4010 x 40 100 59,5010 x 45 100 66,1010 x 50 100 72,2010 x 55 50 78,8010 x 60 50 83,5010 x 65 50 91,6010 x 70 50 94,4010 x 75 50 97,7010 x 80 50 108,3010 x 90 50 113,3010 x 100 50 116,6010 x 110 50 134,5010 x 120 50 154,4010 x 130 50 170,7010 x 140 50 188,1010 x 150 50 198,5010 x 160 25 205,5010 x 180 25 282,4010 x 200 25 309,8012 x 45 50 89,0012 x 50 50 93,7012 x 55 50 96,8012 x 60 50 103,5012 x 65 50 110,2012 x 70 50 114,6012 x 75 25 128,6012 x 80 25 147,5012 x 90 25 151,7012 x 100 25 184,8012 x 110 25 200,3012 x 120 25 215,8012 x 130 25 236,6012 x 140 25 263,1012 x 150 25 286,2012 x 160 10 333,3012 x 170 10 355,5012 x 180 10 377,7012 x 200 10 396,5014 x 55 50 163,8014 x 60 50 180,00
Abmessung VPE Preis €
14 x 65 50 193,2014 x 70 50 200,5014 x 80 25 213,3014 x 90 25 242,3014 x 100 25 261,6014 x 110 25 281,2014 x 120 25 313,7014 x 130 25 344,0014 x 140 25 400,0014 x 150 25 424,9016 x 55 25 174,8016 x 60 25 184,9016 x 65 25 194,6016 x 70 25 210,3016 x 80 25 239,3016 x 90 25 264,0016 x 100 25 277,5016 x 110 25 292,8016 x 120 25 326,5016 x 130 25 345,5016 x 140 25 380,6016 x 150 25 430,3016 x 160 10 498,4416 x 170 10 541,7016 x 180 10 573,5016 x 200 10 700,2016 x 220 10 795,7016 x 240 10 869,4018 x 65 25 335,8018 x 70 25 353,3018 x 75 25 380,5018 x 80 25 410,0018 x 90 25 440,5018 x 100 25 476,3018 x 110 25 514,6018 x 120 25 592,7018 x 130 25 818,3018 x 140 25 1027,7018 x 150 25 1169,4020 x 65 25 334,7020 x 70 25 350,20
Preise per 100 Stück
04 / 2019 Seite 141
Sechskantschrauben mit Schaft
Hexagon head bolts
db2b3b4k Nennmaß
M 51622
-3,5
M 61824
-4
M 82228
-5,3
M 102632456,4
M 123036497,5
M 143440538,8
M 1638445710
M 18424861
11,5
M 20465265
12,5
M 2250566914
M 2454607315
M 2760667917
M 30667285
18,7
M 36788497
22,5
blankDIN 931
künftig ISO / EN i04014
A2
Vis à tête hexagonale
-
Abmessung VPE Preis €
20 x 75 25 379,0020 x 80 25 399,5020 x 90 25 435,2020 x 100 25 444,7020 x 110 25 470,8020 x 120 25 660,0020 x 130 25 688,8020 x 140 25 736,1020 x 150 25 854,7020 x 160 10 944,4020 x 170 10 1065,1020 x 180 10 1100,7020 x 200 10 1136,2020 x 220 10 1211,1020 x 240 10 1333,3020 x 260 10 1444,4020 x 280 10 1560,7020 x 300 10 1693,3022 x 80 25 693,5022 x 90 25 725,6022 x 100 25 757,7022 x 110 20 780,5022 x 120 20 838,8022 x 130 20 905,5022 x 140 20 982,8022 x 150 20 1154,1024 x 80 10 626,3024 x 90 10 699,8024 x 100 10 733,3024 x 110 10 939,0024 x 120 10 1055,0024 x 130 10 1099,1024 x 140 10 1244,4024 x 150 10 1579,4024 x 160 10 1611,1024 x 170 10 1672,2024 x 180 10 1694,4024 x 200 10 1722,20
Seite 142 04 / 2019
Preise per 100 Stück
Sechskantschrauben mit Gewinde bis Kopf
Hexagon head screws
dk Nennmaßa max.s Nennmaß
M 32
1,55,5
M 42,82,1
7
M 53,52,4
8
M 643
10
M 85,3
3,7513
M 85,3
413
M 106,44,517
M 127,5
5,2519
M 148,8
622
M 16106
24
M 1811,57,527
M 2012,57,530
M 24159
36
M 3018,710,5
46
brüniertDIN 933
künftig ISO / EN i04017
8.8
Vis à tête hexaganale
-
Abmessung VPE Preis €
3 x 4 500 23,153 x 5 500 23,153 x 6 500 6,253 x 8 500 6,253 x 10 500 6,253 x 12 500 6,553 x 16 500 7,103 x 20 500 7,753 x 25 500 8,203 x 30 500 8,604 x 6 500 7,204 x 8 500 4,804 x 10 500 4,904 x 12 500 5,654 x 14 500 5,654 x 16 500 5,654 x 20 500 6,104 x 25 500 6,854 x 30 500 8,854 x 35 200 8,954 x 40 200 9,804 x 45 200 10,254 x 50 200 10,805 x 6 500 6,305 x 8 500 4,705 x 10 500 4,255 x 12 500 4,605 x 14 500 4,905 x 16 500 5,455 x 18 500 5,805 x 20 500 6,205 x 25 500 7,205 x 30 500 8,205 x 35 200 8,855 x 40 200 10,255 x 45 200 11,255 x 50 200 12,205 x 55 200 15,605 x 60 200 16,806 x 8 500 7,406 x 10 500 5,90
Abmessung VPE Preis €
6 x 12 500 5,456 x 14 500 5,656 x 16 500 5,006 x 18 500 6,306 x 20 500 5,556 x 22 500 6,006 x 25 500 6,306 x 30 500 7,206 x 35 200 7,956 x 40 200 9,156 x 45 200 9,806 x 50 200 10,356 x 55 200 11,456 x 60 200 12,206 x 65 200 14,406 x 70 200 15,256 x 75 200 16,256 x 80 200 17,206 x 90 100 21,358 x 8 200 22,808 x 10 200 12,308 x 12 200 11,758 x 14 200 12,458 x 16 200 9,708 x 18 200 10,258 x 20 200 9,808 x 22 200 11,008 x 25 200 11,008 x 30 200 12,208 x 35 200 13,508 x 40 200 14,708 x 45 200 17,458 x 50 200 18,758 x 55 200 20,258 x 60 200 21,808 x 65 200 23,108 x 70 200 24,558 x 75 200 26,408 x 80 200 27,708 x 90 100 36,408 x 100 100 39,80
Abmessung VPE Preis €
8 x 110 100 50,158 x 120 100 53,3010 x 12 200 23,2010 x 16 200 18,2010 x 20 200 18,2010 x 22 200 19,7510 x 25 200 18,5510 x 30 200 20,4010 x 35 100 22,3510 x 40 100 24,3010 x 45 100 26,4010 x 50 100 28,2510 x 55 100 30,4010 x 60 100 32,2510 x 65 100 37,9510 x 70 100 39,8010 x 75 100 42,3010 x 80 100 44,4510 x 85 100 52,9510 x 90 100 54,8510 x 100 100 58,6510 x 110 50 70,2010 x 120 50 75,2010 x 130 50 87,7510 x 140 50 97,1010 x 150 50 102,1512 x 16 100 29,2012 x 20 100 29,7512 x 25 100 26,6012 x 30 100 29,4512 x 35 100 32,2512 x 40 100 35,4512 x 45 100 37,9512 x 50 100 41,1012 x 55 100 43,6012 x 60 100 46,1012 x 65 50 54,1512 x 70 50 57,3512 x 80 50 63,3512 x 85 50 74,0012 x 90 50 77,70
Preise per 100 Stück
04 / 2019 Seite 143
Sechskantschrauben mit Gewinde bis Kopf
Hexagon head screws
dk Nennmaßa max.s Nennmaß
M 32
1,55,5
M 42,82,1
7
M 53,52,4
8
M 643
10
M 85,3
3,7513
M 85,3
413
M 106,44,517
M 127,5
5,2519
M 148,8
622
M 16106
24
M 1811,57,527
M 2012,57,530
M 24159
36
M 3018,710,5
46
brüniertDIN 933
künftig ISO / EN i04017
8.8
Vis à tête hexaganale
-
Abmessung VPE Preis €
12 x 100 50 84,0512 x 110 50 100,3012 x 120 50 108,4512 x 130 50 131,6512 x 140 50 137,2512 x 150 50 145,4014 x 20 100 57,0014 x 25 100 50,8014 x 30 100 50,1514 x 35 100 54,5014 x 40 100 58,6514 x 45 50 63,3514 x 50 50 67,7014 x 55 50 79,5514 x 60 50 84,0514 x 65 50 89,0514 x 70 50 94,0514 x 75 50 98,4514 x 80 50 102,8014 x 90 50 123,5014 x 100 50 134,2014 x 110 50 162,9514 x 120 50 174,3016 x 20 50 75,8516 x 25 50 60,1516 x 30 50 60,1516 x 35 50 65,2016 x 40 50 70,8516 x 45 50 76,5016 x 50 50 80,9016 x 55 50 81,5516 x 60 50 91,5516 x 65 25 104,6516 x 70 25 112,1516 x 75 25 118,5016 x 80 25 124,1516 x 85 25 142,9016 x 90 25 150,4016 x 100 25 162,3016 x 110 25 193,7016 x 120 25 207,45
Abmessung VPE Preis €
16 x 130 25 248,8516 x 140 25 265,7516 x 150 25 281,4516 x 160 25 347,8016 x 170 25 366,7016 x 180 25 391,7516 x 200 25 492,0518 x 30 50 140,4018 x 35 50 133,5518 x 40 50 126,6518 x 45 50 112,8018 x 50 50 120,3518 x 55 25 127,2018 x 60 25 132,2018 x 65 25 154,2518 x 70 25 161,7518 x 75 25 169,3018 x 80 25 177,3518 x 90 25 206,9018 x 100 25 230,0018 x 110 25 278,9518 x 120 25 297,7020 x 30 25 141,7020 x 35 25 138,5520 x 40 25 121,6520 x 45 25 128,5020 x 50 25 137,9020 x 55 25 144,7520 x 60 25 153,6020 x 65 25 178,6520 x 70 25 188,0520 x 75 25 195,5520 x 80 25 205,5520 x 85 25 235,6520 x 90 25 246,3520 x 100 25 267,0520 x 110 25 316,5520 x 120 25 338,4520 x 130 25 407,4520 x 140 25 429,3520 x 150 25 454,40
Abmessung VPE Preis €
20 x 160 10 545,3520 x 180 10 598,5020 x 200 10 780,3522 x 40 25 437,8522 x 45 25 392,0522 x 50 25 437,8522 x 55 25 439,4022 x 60 25 488,7522 x 65 25 495,1022 x 70 25 596,6522 x 75 25 582,5022 x 80 25 650,7522 x 90 25 650,7522 x 100 10 812,5022 x 120 10 980,5524 x 35 25 288,9524 x 40 25 232,5024 x 45 25 247,5524 x 50 25 236,3024 x 55 25 248,8524 x 60 25 262,0524 x 65 25 275,1024 x 70 25 288,3024 x 75 25 300,2024 x 80 25 312,7024 x 85 10 363,5024 x 90 10 376,0524 x 100 10 404,3024 x 110 10 479,5024 x 120 10 510,7524 x 130 10 611,0524 x 140 10 642,4524 x 150 10 680,0524 x 160 10 817,9524 x 170 10 855,5524 x 180 10 896,3024 x 200 10 1165,7527 x 60 10 438,7527 x 70 10 482,6527 x 80 10 532,8027 x 90 10 560,90
Seite 144 04 / 2019
Preise per 100 Stück
Sechskantschrauben mit Gewinde bis Kopf
Hexagon head screws
dk Nennmaßa max.s Nennmaß
M 32
1,55,5
M 42,82,1
7
M 53,52,4
8
M 643
10
M 85,3
3,7513
M 85,3
413
M 106,44,517
M 127,5
5,2519
M 148,8
622
M 16106
24
M 1811,57,527
M 2012,57,530
M 24159
36
M 3018,710,5
46
brüniertDIN 933
künftig ISO / EN i04017
8.8
Vis à tête hexaganale
-
Abmessung VPE Preis €
27 x 100 10 604,8527 x 120 10 683,2027 x 130 10 814,8030 x 60 10 573,4530 x 65 10 598,5030 x 70 10 623,6030 x 75 10 651,8030 x 80 10 676,9030 x 90 10 717,6530 x 100 10 770,9530 x 110 10 824,1530 x 120 10 874,3030 x 130 10 1034,2030 x 140 10 1093,7030 x 150 10 1153,2033 x 60 10 1600,3533 x 65 10 1576,8033 x 70 10 1763,8533 x 75 10 1617,6533 x 80 10 1808,5533 x 90 10 1901,0533 x 100 10 2005,8033 x 110 10 2193,9533 x 120 10 2193,9533 x 130 10 2621,1033 x 140 10 2836,9533 x 150 10 2997,3036 x 50 5 930,7536 x 60 5 1012,1536 x 65 5 1081,1536 x 70 5 1081,1536 x 80 5 1178,3036 x 90 5 1259,8036 x 100 5 1353,8036 x 110 5 1623,3536 x 120 5 1698,5536 x 130 5 1798,8536 x 140 5 1892,8036 x 150 5 1360,1036 x 160 5 2481,9536 x 170 5 2601,05
Abmessung VPE Preis €
36 x 180 5 2707,5536 x 200 5 2927,00
Preise per 100 Stück
04 / 2019 Seite 145
Sechskantschrauben mit Gewinde bis Kopf
Hexagon head screws
dk Nennmaßa max.s Nennmaß
M 32
1,55,5
M 42,82,1
7
M 53,52,4
8
M 643
10
M 85,3
3,7513
M 85,3
413
M 106,44,517
M 127,5
5,2519
M 148,8
622
M 16106
24
M 1811,57,527
M 2012,57,530
M 24159
36
M 3018,710,5
46
verz. blauDIN 933
künftig ISO / EN i04017
8.8
Vis à tête hexaganale
-
Abmessung VPE Preis €
3 x 6 500 5,903 x 8 500 7,103 x 10 500 7,103 x 12 500 7,403 x 16 500 7,953 x 20 500 8,703 x 25 500 9,253 x 30 500 9,703 x 35 500 10,253 x 40 500 11,354 x 6 500 8,404 x 8 500 5,454 x 10 500 5,554 x 12 500 6,654 x 14 500 6,654 x 16 500 6,654 x 18 500 7,104 x 20 500 7,104 x 22 500 7,404 x 25 500 9,604 x 30 500 9,604 x 35 200 10,254 x 40 200 11,254 x 45 200 11,554 x 50 200 12,455 x 6 500 6,855 x 8 500 5,355 x 10 500 4,805 x 12 500 5,105 x 14 500 5,655 x 16 500 6,105 x 18 500 6,455 x 20 500 6,855 x 22 500 7,405 x 25 500 7,955 x 30 500 9,155 x 35 200 9,905 x 40 200 11,355 x 45 200 12,455 x 50 200 13,505 x 55 200 17,35
Abmessung VPE Preis €
5 x 60 200 18,655 x 65 200 19,955 x 70 200 21,255 x 75 200 22,556 x 6 500 16,006 x 8 500 8,306 x 10 500 6,556 x 12 500 6,006 x 14 500 6,456 x 16 500 5,656 x 18 500 6,106 x 20 500 6,456 x 22 500 6,856 x 25 500 7,306 x 30 500 8,206 x 35 200 9,156 x 40 200 10,356 x 45 200 11,106 x 50 200 11,906 x 55 200 13,106 x 60 200 13,856 x 65 200 16,156 x 70 200 17,006 x 75 200 18,106 x 80 200 19,206 x 90 100 23,856 x 100 100 26,256 x 120 100 30,958 x 10 200 16,358 x 12 200 13,208 x 14 200 13,758 x 16 200 10,808 x 18 200 11,558 x 20 200 11,108 x 22 200 12,308 x 25 200 12,458 x 30 200 13,858 x 35 200 15,258 x 40 200 16,708 x 45 200 19,858 x 50 200 21,15
Abmessung VPE Preis €
8 x 55 200 23,108 x 60 200 24,758 x 65 200 26,258 x 70 200 27,808 x 75 200 29,858 x 80 100 31,408 x 90 100 40,908 x 100 100 45,008 x 110 100 48,408 x 120 100 52,458 x 130 100 62,708 x 140 100 67,158 x 150 100 71,5010 x 10 200 33,0510 x 12 200 24,8510 x 14 200 23,1010 x 16 200 19,8510 x 18 200 21,7010 x 20 200 19,8510 x 22 200 20,7010 x 25 200 20,2510 x 30 200 22,3510 x 35 100 24,4010 x 40 100 26,6010 x 45 100 28,6510 x 50 100 30,8510 x 55 100 33,3510 x 60 100 35,0010 x 65 100 40,9010 x 70 100 45,8010 x 75 100 45,8010 x 80 100 48,0510 x 85 100 57,2510 x 90 100 59,2010 x 100 100 63,4510 x 110 50 75,8510 x 120 50 81,1010 x 130 50 98,1010 x 140, 50 104,0010 x 150 50 109,8510 x 160 50 132,10
Seite 146 04 / 2019
Preise per 100 Stück
Sechskantschrauben mit Gewinde bis Kopf
Hexagon head screws
dk Nennmaßa max.s Nennmaß
M 32
1,55,5
M 42,82,1
7
M 53,52,4
8
M 643
10
M 85,3
3,7513
M 85,3
413
M 106,44,517
M 127,5
5,2519
M 148,8
622
M 16106
24
M 1811,57,527
M 2012,57,530
M 24159
36
M 3018,710,5
46
verz. blauDIN 933
künftig ISO / EN i04017
8.8
Vis à tête hexaganale
-
Abmessung VPE Preis €
10 x 180 50 217,0010 x 200 50 236,1012 x 16 100 31,5012 x 18 100 33,0512 x 20 100 32,1512 x 25 100 29,1012 x 30 100 32,1512 x 35 100 35,3012 x 40 100 38,2512 x 45 100 41,2012 x 50 100 44,4512 x 55 100 47,4012 x 60 100 50,3512 x 65 50 58,8512 x 70 50 62,1512 x 75 50 66,0512 x 80 50 68,6512 x 85 50 79,8012 x 90 50 84,3512 x 95 50 90,9012 x 100 50 90,9012 x 110 50 107,9012 x 120 50 116,4012 x 130 50 137,3512 x 140 50 147,8012 x 150 50 156,9512 x 160 50 187,7012 x 170 50 200,1012 x 180 50 212,5512 x 200 50 270,1012 x 220 50 349,9014 x 20 100 61,1514 x 25 100 54,6014 x 30 100 54,3014 x 35 100 59,2014 x 40 100 63,7514 x 45 50 68,6514 x 50 50 73,2514 x 55 50 86,3514 x 60 50 90,9014 x 65 50 96,15
Abmessung VPE Preis €
14 x 70 50 101,3514 x 75 50 105,9514 x 80 50 110,5514 x 90 50 132,7514 x 100 50 144,5514 x 120 50 187,0516 x 20 50 81,1016 x 25 50 73,2516 x 30 50 66,0516 x 35 50 71,9516 x 40 50 77,1516 x 45 50 83,0516 x 50 50 88,3016 x 55 50 94,2016 x 60 50 100,0516 x 65 25 115,7516 x 70 25 121,6516 x 75 25 128,8516 x 80 25 134,7016 x 90 25 162,2016 x 100 25 175,2516 x 110 25 209,3016 x 120 25 223,6516 x 130 25 267,5016 x 140 25 285,1516 x 150 25 301,5016 x 160 25 369,5016 x 180 25 418,5516 x 190 25 497,0516 x 200 25 523,2018 x 30 50 150,4018 x 35 50 143,2518 x 40 50 136,0518 x 45 50 122,3018 x 50 50 130,1518 x 55 25 138,0018 x 60 25 143,9018 x 70 25 174,6018 x 80 25 191,6018 x 90 25 229,5518 x 100 25 247,20
Abmessung VPE Preis €
18 x 120 25 319,8018 x 140 25 412,0020 x 30 25 153,0520 x 35 25 149,7520 x 40 25 132,1020 x 45 25 140,6020 x 50 25 149,7520 x 55 25 158,2520 x 60 25 167,4020 x 65 25 194,2520 x 70 25 203,4020 x 75 25 212,5520 x 80 25 223,0020 x 90 25 266,2020 x 100 25 287,7520 x 110 25 340,1020 x 120 25 362,9520 x 130 25 438,2020 x 140 25 461,0520 x 150 25 490,5020 x 160 10 582,0520 x 200 10 833,8524 x 40 25 251,8024 x 45 25 267,5024 x 50 25 256,3524 x 55 25 270,1024 x 60 25 284,5024 x 65 25 298,2024 x 70 25 312,6024 x 75 25 325,7024 x 80 25 340,1024 x 85 25 392,4024 x 90 10 405,5024 x 100 10 438,2024 x 110 10 516,6524 x 120 10 549,3524 x 140 10 693,2530 x 60 10 618,0530 x 70 10 670,3530 x 80 10 725,9530 x 90 10 781,55
Preise per 100 Stück
04 / 2019 Seite 147
Sechskantschrauben mit Gewinde bis Kopf
Hexagon head screws
dk Nennmaßa max.s Nennmaß
M 32
1,55,5
M 42,82,1
7
M 53,52,4
8
M 643
10
M 85,3
3,7513
M 85,3
413
M 106,44,517
M 127,5
5,2519
M 148,8
622
M 16106
24
M 1811,57,527
M 2012,57,530
M 24159
36
M 3018,710,5
46
verz. blauDIN 933
künftig ISO / EN i04017
8.8
Vis à tête hexaganale
-
Abmessung VPE Preis €
30 x 100 10 833,8530 x 110 10 886,1530 x 120 10 941,7530 x 130 10 1115,0530 x 140 10 1177,2030 x 150 10 1236,05
Seite 148 04 / 2019
Preise per 100 Stück
Sechskantschrauben mit Gewinde bis Kopf
Hexagon head screws
dk Nennmaßa max.s Nennmaß
M 32
1,55,5
M 42,82,1
7
M 53,52,4
8
M 643
10
M 85,3
3,7513
M 85,3
413
M 106,44,517
M 127,5
5,2519
M 148,8
622
M 16106
24
M 1811,57,527
M 2012,57,530
M 24159
36
M 3018,710,5
46
brüniertDIN 933
künftig ISO / EN i04017
10.9
Vis à tête hexaganale
-
Abmessung VPE Preis €
6 x 10 500 6,546 x 12 100 7,746 x 16 100 7,006 x 18 500 8,346 x 20 100 9,306 x 25 100 9,306 x 40 100 10,906 x 35 200 13,566 x 40 200 13,626 x 70 200 24,128 x 12 200 12,908 x 16 200 14,948 x 18 200 15,668 x 20 200 13,568 x 25 200 15,248 x 30 200 24,728 x 35 200 18,008 x 40 200 20,108 x 50 200 27,368 x 60 200 28,748 x 80 200 48,128 x 140 100 138,7810 x 16 200 23,4010 x 20 200 23,6410 x 25 200 25,3810 x 30 200 28,5010 x 35 100 31,3210 x 40 100 33,4210 x 45 100 36,3610 x 50 100 39,0010 x 60 100 51,4810 x 70 100 56,4010 x 80 100 63,0610 x 90 100 69,4210 x 100 100 75,4212 x 20 100 38,5212 x 25 100 42,7212 x 30 100 43,5012 x 35 100 55,0812 x 40 100 57,5712 x 45 100 62,62
Abmessung VPE Preis €
12 x 50 100 67,6612 x 55 100 72,7112 x 60 100 77,7512 x 65 50 82,8012 x 70 50 87,8512 x 75 50 92,8912 x 80 50 97,9412 x 90 50 109,8612 x 100 50 120,0012 x 110 50 128,4012 x 120 50 146,6414 x 25 100 70,7414 x 30 100 70,2014 x 35 100 76,1414 x 40 100 79,9814 x 45 50 98,7014 x 50 50 95,2814 x 55 50 112,4414 x 60 50 120,9014 x 65 50 130,1414 x 100 50 169,2616 x 25 50 148,8016 x 30 50 100,0016 x 35 50 103,5616 x 40 50 100,0216 x 45 50 100,9816 x 50 50 109,2616 x 55 50 133,0816 x 60 50 127,8616 x 70 25 128,9416 x 80 25 144,2416 x 90 25 210,0016 x 100 25 210,0016 x 110 25 213,1816 x 140 25 238,9816 x 180 25 437,1016 x 200 25 527,6416 x 260 1 915,1218 x 45 50 178,2018 x 50 50 184,1420 x 30 25 200,76
Abmessung VPE Preis €
20 x 35 25 198,1220 x 40 25 217,5020 x 45 25 220,3820 x 50 25 234,2620 x 55 25 245,3920 x 60 25 256,5220 x 65 25 267,6520 x 70 25 268,2020 x 80 25 270,0020 x 90 25 271,6820 x 100 25 314,2822 x 55 25 361,2024 x 50 25 320,4624 x 55 25 337,7424 x 60 25 377,9424 x 65 25 385,0024 x 70 25 378,2424 x 80 25 440,5824 x 90 10 469,7424 x 100 10 505,50
Preise per 100 Stück
04 / 2019 Seite 149
Sechskantschrauben mit Gewinde bis Kopf
Hexagon head screws
dk Nennmaßa max.s Nennmaß
M 32
1,55,5
M 42,82,1
7
M 53,52,4
8
M 643
10
M 85,3
3,7513
M 85,3
413
M 106,44,517
M 127,5
5,2519
M 148,8
622
M 16106
24
M 1811,57,527
M 2012,57,530
M 24159
36
M 3018,710,5
46
verz. blauDIN 933
künftig ISO / EN i04017
10.9
Vis à tête hexaganale
-
Abmessung VPE Preis €
6 x 10 500 7,566 x 12 500 9,126 x 16 500 8,466 x 20 500 10,506 x 22 500 11,766 x 25 500 12,066 x 30 500 14,286 x 35 500 13,806 x 40 500 15,666 x 45 200 17,166 x 50 200 20,946 x 55 200 23,586 x 60 200 24,428 x 12 200 14,768 x 16 200 13,748 x 18 200 15,428 x 20 200 15,488 x 22 200 16,268 x 25 200 17,348 x 30 200 19,088 x 35 200 22,388 x 40 200 29,108 x 45 200 30,428 x 50 200 32,768 x 55 200 35,528 x 60 200 36,548 x 70 200 41,408 x 75 200 43,628 x 80 200 46,268 x 100 100 61,6810 x 12 200 36,4210 x 16 200 29,0410 x 18 200 33,1810 x 20 200 26,5210 x 25 200 31,0810 x 30 200 32,0010 x 35 100 34,1410 x 40 100 44,1610 x 45 100 48,0010 x 50 100 50,0010 x 55 100 55,62
Abmessung VPE Preis €
10 x 60 100 59,8810 x 70 100 66,3610 x 75 100 68,8210 x 80 100 72,5410 x 90 100 79,6810 x 100 100 86,7610 x 110 50 133,8012 x 20 100 52,0212 x 25 100 43,2612 x 30 100 52,0212 x 35 100 57,3612 x 40 100 57,6012 x 45 100 60,0012 x 50 100 65,7612 x 55 100 67,0012 x 60 100 69,0612 x 65 50 76,5612 x 70 50 86,0412 x 75 50 105,0612 x 80 50 116,8812 x 90 50 128,1612 x 100 50 139,8612 x 110 50 150,0012 x 120 50 159,3012 x 130 50 202,5612 x 140 50 230,5812 x 150 50 255,6012 x 160 25 274,1412 x 180 25 363,9612 x 200 25 376,6814 x 30 100 93,2414 x 35 100 100,0014 x 40 100 106,3214 x 45 50 118,6814 x 50 50 161,5214 x 60 50 126,5414 x 65 50 147,4214 x 70 50 138,0614 x 80 50 152,4014 x 90 50 180,7216 x 20 50 122,70
Abmessung VPE Preis €
16 x 25 50 127,5516 x 30 50 130,8016 x 35 50 135,1516 x 40 50 144,9516 x 45 50 149,3516 x 50 50 163,5016 x 55 50 176,6016 x 60 50 180,9516 x 65 25 190,0016 x 70 25 200,0016 x 75 25 204,7816 x 80 25 220,0016 x 90 25 230,0016 x 100 25 246,6016 x 110 25 266,7016 x 120 25 279,9616 x 140 25 309,2416 x 150 25 321,3616 x 160 25 510,4816 x 180 25 647,1016 x 190 25 700,0016 x 200 25 735,0018 x 40 50 213,1818 x 45 50 220,9818 x 50 50 244,6218 x 55 25 303,7218 x 60 25 310,5618 x 70 25 331,3220 x 30 25 306,9620 x 35 25 220,5620 x 40 25 222,4820 x 45 25 257,8220 x 50 25 260,0020 x 55 25 260,7620 x 60 25 270,0020 x 65 25 278,2820 x 70 25 291,6620 x 75 25 304,2020 x 80 25 360,0020 x 90 25 392,4620 x 100 25 432,60
Seite 150 04 / 2019
Preise per 100 Stück
Sechskantschrauben mit Gewinde bis Kopf
Hexagon head screws
dk Nennmaßa max.s Nennmaß
M 32
1,55,5
M 42,82,1
7
M 53,52,4
8
M 643
10
M 85,3
3,7513
M 85,3
413
M 106,44,517
M 127,5
5,2519
M 148,8
622
M 16106
24
M 1811,57,527
M 2012,57,530
M 24159
36
M 3018,710,5
46
verz. blauDIN 933
künftig ISO / EN i04017
10.9
Vis à tête hexaganale
-
Abmessung VPE Preis €
20 x 110 25 455,5820 x 120 25 490,8020 x 130 25 520,8620 x 140 25 547,1420 x 150 25 580,8020 x 160 25 699,4820 x 200 25 1100,2824 x 40 25 472,0824 x 45 25 500,5224 x 50 25 392,3424 x 55 25 439,9224 x 60 25 468,1224 x 65 25 500,0024 x 70 25 516,6624 x 75 25 538,9824 x 80 25 564,7824 x 90 10 595,8024 x 100 10 658,38
Preise per 100 Stück
04 / 2019 Seite 151
Sechskantschrauben mit Gewinde bis Kopf
Hexagon head screws
dk Nennmaßa max.s Nennmaß
M 42,82,1
7
M 53,52,4
8
M 643
10
M 85,3
3,7513
M 106,44,517
M 127,5
5,2519
M 148,8
622
M 16106
24
M 1811,57,527
M 2012,57,530
M 22147,532
M 24159
36
M 27179
41
M 3018,710,5
46
M 3622,5
1255
blankDIN 933
künftig ISO / EN i04017
A2
Vis à tête hexaganale
-
Abmessung VPE Preis €
2 x 5 1000 36,152 x 6 1000 36,152 x 8 1000 41,352 x 10 1000 43,902 x 12 1000 46,502 x 16 1000 49,102 x 20 1000 51,652,5 x 5 1000 36,152,5 x 6 1000 36,152,5 x 8 1000 41,352,5 x 10 1000 43,902,5 x 12 1000 46,502,5 x 16 1000 49,102,5 x 20 1000 51,653 x 6 1000 6,203 x 8 1000 4,653 x 10 1000 4,653 x 12 1000 4,153 x 16 1000 4,653 x 20 1000 4,653 x 25 500 5,703 x 30 500 6,753 x 35 500 11,403 x 40 500 13,453 x 50 500 27,904 x 6 500 6,204 x 8 500 7,204 x 10 500 5,204 x 12 500 5,704 x 14 500 7,704 x 16 500 5,804 x 18 500 8,504 x 20 500 6,604 x 22 500 9,404 x 25 500 7,504 x 30 500 7,904 x 35 200 10,804 x 40 200 13,204 x 45 200 16,254 x 50 200 17,205 x 6 500 7,35
Abmessung VPE Preis €
5 x 8 500 6,205 x 10 500 5,805 x 12 500 6,105 x 14 500 8,005 x 16 500 7,005 x 18 500 7,705 x 20 500 7,105 x 22 500 9,205 x 25 500 13,205 x 30 500 14,405 x 35 200 14,705 x 40 200 15,805 x 45 200 18,005 x 50 200 18,905 x 55 200 25,505 x 60 100 26,605 x 70 100 48,556 x 8 500 7,856 x 10 500 8,306 x 12 500 9,206 x 14 500 10,206 x 16 500 9,406 x 18 500 11,906 x 20 200 9,606 x 22 200 10,706 x 25 200 10,806 x 30 200 12,606 x 35 200 15,006 x 40 200 15,406 x 45 200 18,206 x 50 200 20,806 x 55 200 23,306 x 60 100 25,006 x 65 100 28,806 x 70 100 29,606 x 75 100 31,506 x 80 100 40,206 x 90 100 46,106 x 100 100 49,206 x 110 50 83,506 x 120 50 93,90
Abmessung VPE Preis €
8 x 10 200 24,108 x 12 200 18,808 x 14 200 20,008 x 16 200 20,008 x 18 200 20,508 x 20 200 20,808 x 22 200 22,208 x 25 200 21,308 x 30 200 25,208 x 35 200 28,208 x 40 200 28,608 x 45 100 33,308 x 50 100 39,108 x 55 100 39,408 x 60 100 41,108 x 65 100 44,108 x 70 50 54,608 x 80 50 55,308 x 90 50 66,108 x 100 50 67,508 x 110 50 93,608 x 120 50 100,308 x 130 50 177,908 x 140 50 222,758 x 150 50 266,058 x 160 25 310,408 x 170 25 354,758 x 180 25 396,4510 x 12 100 49,6010 x 16 100 37,1010 x 18 100 37,8010 x 20 100 38,1010 x 22 100 39,7010 x 25 100 40,3010 x 30 100 40,7010 x 30AD 2000- 100 40,7010 x 35 100 46,5010 x 40 100 46,7010 x 45 100 51,3010 x 50 50 65,3010 x 55 50 69,50
Seite 152 04 / 2019
Preise per 100 Stück
Sechskantschrauben mit Gewinde bis Kopf
Hexagon head screws
dk Nennmaßa max.s Nennmaß
M 42,82,1
7
M 53,52,4
8
M 643
10
M 85,3
3,7513
M 106,44,517
M 127,5
5,2519
M 148,8
622
M 16106
24
M 1811,57,527
M 2012,57,530
M 22147,532
M 24159
36
M 27179
41
M 3018,710,5
46
M 3622,5
1255
blankDIN 933
künftig ISO / EN i04017
A2
Vis à tête hexaganale
-
Abmessung VPE Preis €
10 x 60 50 75,8010 x 65 50 81,5010 x 70 50 88,8010 x 75 50 90,0010 x 80 50 92,5010 x 90 50 104,5010 x 100 50 114,6010 x 110 50 129,4010 x 120 50 140,3010 x 130 50 260,8510 x 140 50 318,2010 x 150 50 372,9510 x 160 25 430,3510 x 170 25 485,1010 x 180 25 542,5012 x 16 50 57,0012 x 20 50 60,5012 x 25 50 65,1012 x 30 50 69,4012 x 35 50 75,8012 x 40 50 80,7012 x 45 50 87,0012 x 50 50 93,3012 x 55 50 98,8012 x 60 50 106,6012 x 65 50 108,8012 x 70 50 110,9012 x 75 25 115,8012 x 80 25 123,8012 x 90 25 150,0012 x 100 25 170,0012 x 110 25 176,2012 x 120 25 210,5012 x 130 25 297,3012 x 140 25 399,0012 x 150 25 464,2012 x 160 10 526,8512 x 170 10 589,4012 x 180 10 652,0014 x 20 50 96,0014 x 25 50 83,00
Abmessung VPE Preis €
14 x 30 50 109,6014 x 35 50 118,6014 x 40 50 135,3014 x 45 50 139,4014 x 50 50 144,2014 x 55 50 152,8014 x 60 50 167,8014 x 65 50 177,0014 x 70 50 182,7014 x 80 50 200,3014 x 90 50 219,4014 x 100 50 258,6014 x 110 25 358,3514 x 120 25 402,7016 x 20 25 127,5016 x 25 25 131,8016 x 30 25 150,0016 x 35 25 155,5016 x 40 25 166,1016 x 45 25 175,0016 x 50 25 178,0016 x 55 25 182,5016 x 60 25 200,7016 x 65 25 213,8016 x 70 25 218,6016 x 75 25 230,8016 x 80 25 242,9016 x 90 25 250,6016 x 100 25 261,7016 x 110 25 310,0016 x 120 25 370,9016 x 130 25 405,5016 x 140 25 424,9016 x 150 25 472,5016 x 160 25 824,1516 x 170 25 850,2016 x 180 10 850,2016 x 190 10 938,8516 x 200 10 938,8518 x 30 25 213,4018 x 35 25 244,70
Abmessung VPE Preis €
18 x 40 25 242,3018 x 45 25 251,3018 x 50 25 271,1018 x 55 25 292,2018 x 60 25 311,1018 x 65 25 318,8018 x 70 25 330,0018 x 75 25 352,2018 x 80 25 377,2018 x 90 25 443,8018 x 100 25 456,3018 x 110 25 579,0018 x 120 25 740,0018 x 130 25 772,2018 x 140 25 805,5018 x 150 25 877,7020 x 25 25 300,4520 x 30 25 266,6020 x 35 25 284,0020 x 40 25 301,3020 x 45 25 306,9020 x 50 25 313,9020 x 55 25 320,8020 x 60 25 324,3020 x 65 25 334,8020 x 70 25 348,1020 x 75 25 360,7020 x 80 25 398,2020 x 90 25 436,1020 x 100 25 475,5020 x 110 25 520,5020 x 120 25 633,3020 x 130 25 676,1020 x 140 25 718,8020 x 150 25 772,2020 x 160 25 1043,2020 x 170 25 1079,6520 x 180 20 1079,6520 x 190 20 1178,8020 x 200 20 1178,8022 x 40 25 450,00
Preise per 100 Stück
04 / 2019 Seite 153
Sechskantschrauben mit Gewinde bis Kopf
Hexagon head screws
dk Nennmaßa max.s Nennmaß
M 42,82,1
7
M 53,52,4
8
M 643
10
M 85,3
3,7513
M 106,44,517
M 127,5
5,2519
M 148,8
622
M 16106
24
M 1811,57,527
M 2012,57,530
M 22147,532
M 24159
36
M 27179
41
M 3018,710,5
46
M 3622,5
1255
blankDIN 933
künftig ISO / EN i04017
A2
Vis à tête hexaganale
-
Abmessung VPE Preis €
22 x 45 25 450,0022 x 50 25 405,5022 x 55 25 422,2022 x 60 25 438,8022 x 65 25 466,6022 x 70 25 477,7022 x 75 25 516,6022 x 80 25 583,3022 x 90 25 616,6022 x 100 25 677,7022 x 110 20 736,9022 x 120 20 797,2222 x 130 20 859,4022 x 140 20 921,1122 x 150 10 1000,5024 x 40 10 500,0024 x 45 10 500,0024 x 50 10 504,4024 x 55 10 511,2824 x 60 10 539,4024 x 65 10 567,6024 x 70 10 666,6024 x 75 10 694,4024 x 80 10 722,2024 x 90 10 752,8024 x 100 10 788,8024 x 110 10 888,8024 x 120 10 916,6024 x 130 10 941,6024 x 140 10 965,7024 x 150 10 1027,7024 x 160 10 1439,5524 x 170 10 1470,9024 x 180 5 1470,9024 x 190 5 1533,4524 x 200 5 1533,4527 x 50 10 1166,6027 x 55 10 1213,8027 x 60 10 1262,7027 x 65 10 1327,7027 x 70 10 1472,20
Abmessung VPE Preis €
27 x 80 10 1555,5027 x 90 10 1644,4027 x 100 10 1805,5027 x 110 10 2194,4027 x 120 10 2416,6030 x 60 10 1344,4030 x 65 10 1566,6030 x 70 10 1605,5030 x 80 10 1638,8030 x 90 10 1655,5030 x 100 10 1666,6030 x 110 10 1711,1030 x 120 10 1777,7033 x 70 10 1277,8533 x 80 10 1382,2033 x 90 10 1476,1033 x 100 10 1575,1533 x 110 10 1757,7033 x 120 10 1862,0536 x 80 5 1385,1036 x 90 5 1704,0036 x 100 5 1961,6036 x 110 5 2255,60
Seite 154 04 / 2019
Preise per 100 Stück
Sechskantmuttern
Hexagon nuts
dm max.e min.s Nennmaß
M 21,6
4,324
M 2,52
5,455
M 32,4
6,015,5
M 3,52,8
6,586
M 43,2
7,667
M 54
8,798
M 65
11,0510
M 86,5
14,3813
M 108
18,9017
M 1210
21,1019
M 1411
24,4922
M 1613
26,7524
M 1815,8
29,5627
M 2018
39,2530
M 2219,4
37,2932
blankDIN 934
künftig ISO / EN i04032
8
Écrous à six pans
-
Abmessung VPE Preis €
2 1000 1,002,5 1000 1,003 1000 1,103,5 1000 1,754 1000 1,205 1000 1,656 1000 2,057 1000 5,008 1000 4,358 x 1 1000 8,2010 500 9,0510 x 1 500 18,1012 500 14,0512 x 1,5 500 16,5514 200 22,0014 x 1,5 200 31,5016 200 28,1016 x 1,5 200 37,0518 100 39,0018 x 1,5 100 70,4020 100 59,2020 x 1,5 100 71,2022 50 94,0522 x 1,5 50 103,6524 50 105,3024 x 1,5 50 115,5524 x 2 50 124,3527 25 200,5530 25 280,8030 x 1,5 25 257,7030 x 2 25 257,7033 25 361,0036 25 491,3539 1 792,2042 1 862,4045 1 839,9548 1 1333,7052 1 1525,35
Preise per 100 Stück
04 / 2019 Seite 155
Sechskantmuttern
Hexagon nuts
dm max.e min.s Nennmaß
M 21,6
4,324
M 2,52
5,455
M 32,4
6,015,5
M 3,52,8
6,586
M 43,2
7,667
M 54
8,798
M 65
11,0510
M 86,5
14,3813
M 108
18,9017
M 1210
21,1019
M 1411
24,4922
M 1613
26,7524
M 1815,8
29,5627
M 2018
39,2530
M 2219,4
37,2932
verz. blauDIN 934
künftig ISO / EN i04032
8
Écrous à six pans
-
Abmessung VPE Preis €
2 1000 1,002,5 1000 1,003 1000 1,104 1000 1,205 1000 1,306 1000 2,307 1000 4,358 1000 4,358 x 1 1000 10,9010 500 9,5010 x 1 500 17,1010 x 1,25 500 17,1012 500 13,6512 x 1,5 500 22,0014 200 22,0014 x 1,5 200 41,9516 200 27,7016 x 1,5 200 55,5018 100 59,2018 x 1,5 100 93,8520 100 59,2020 x 1,5 100 94,5022 50 110,3024 50 110,3024 x 1,5 50 154,0024 x 2,0 50 154,0027 25 215,6027 x 1,5 25 294,2030 25 313,9030 x 1,5 25 343,2530 x 2 25 343,5533 25 371,0536 25 551,5539 10 1002,8042 10 1103,1048 10 1504,20
Seite 156 04 / 2019
Preise per 100 Stück
Sechskantmuttern
Hexagon nuts
dm max.e min.s Nennmaß
M 21,6
4,324
M 2,52
5,455
M 32,4
6,015,5
M 3,52,8
6,586
M 43,2
7,667
M 54
8,798
M 65
11,0510
M 86,5
14,3813
M 108
18,9017
M 1210
21,1019
M 1411
24,4922
M 1613
26,7524
M 1815,8
29,5627
M 2018
39,2530
M 2219,4
37,2932
tznDIN 934
künftig ISO / EN i04032
8
Écrous à six pans
-
Abmessung VPE Preis €
10 500 22,5512 500 29,3016 200 51,9020 100 106,1524 50 167,2027 25 266,20
Preise per 100 Stück
04 / 2019 Seite 157
Sechskantmuttern
Hexagon nuts
Gewinde dm max.e min.s Nennmaß
M 32,4
6,015,5
M 43,2
7,667
M 54
8,798
M 65
11,0510
M 86,5
14,3813
M 108
18,9017
M 1210
21,1019
M 1411
24,4922
M 1613
26,7524
M 1815
29,5627
M 2016
32,9530
M 2218
35,0332
M 2419
39,5536
M 2722
45,2041
M 3024
50,8546
brüniertDIN 934
künftig ISO / EN i04032
10
Écrous à six pans
-
Abmessung VPE Preis €
3 1000 4,304 1000 4,505 1000 3,256 1000 3,508 1000 6,458 x 1 1000 7,8510 500 12,1012 500 18,7012 x 1,5 500 22,2514 200 32,9014 x 1,5 200 39,9016 200 35,2516 x 1,5 200 41,6018 100 53,4018 x 1,5 100 71,4520 100 65,8520 x 1,5 100 77,1524 50 86,2024 x 1,5 50 118,7027 25 155,8027 x 1,5 25 233,8030 25 207,7530 x 1,5 25 278,6536 25 343,3036 x 1,5 25 844,10
Seite 158 04 / 2019
Preise per 100 Stück
Sechskantmuttern
Hexagon nuts
Gewinde dm max.e min.s Nennmaß
M 32,4
6,015,5
M 43,2
7,667
M 54
8,798
M 65
11,0510
M 86,5
14,3813
M 108
18,9017
M 1210
21,1019
M 1411
24,4922
M 1613
26,7524
M 1815
29,5627
M 2016
32,9530
M 2218
35,0332
M 2419
39,5536
M 2722
45,2041
M 3024
50,8546
verz. blauDIN 934
künftig ISO / EN i04032
10
Écrous à six pans
-
Abmessung VPE Preis €
4 1000 6,055 1000 4,306 1000 4,708 1000 8,5010 500 16,1010 x 1 500 23,5512 500 24,9012 x 1,25 500 29,7012 x 1,5 500 29,7014 200 43,8514 x 1,5 200 53,1516 200 47,0016 x 1,5 200 55,4518 100 71,0018 x 1,5 100 95,2520 100 67,2520 x 1,5 100 102,9522 50 113,4524 50 114,9524 x 1,5 50 158,2027 25 207,7527 25 350,0036 25 440,90
Preise per 100 Stück
04 / 2019 Seite 159
Sechskantmuttern
Hexagon nuts
dHöhe m max.Schlüsselweite N
M 21,6
4
M 2,525
M 32,45,5
M 43,2
7
M 548
M 65
10
M 86,513
M 108
17
M 121019
M 141122
M 161324
M 181527
M 201630
M 221832
M 241936
blankDIN 934
künftig ISO / EN i04032
A2
Écrous à six pans
-
Abmessung VPE Preis €
1 1000 66,101,2 1000 38,451,4 1000 36,251,6 1000 24,351,7 1000 24,352 1000 3,552,3 1000 5,652,5 1000 3,552,6 1000 6,053 1000 1,653,5 1000 5,404 1000 1,755 1000 2,156 1000 3,507 500 7,758 500 6,4010 200 13,6510 x 1 200 48,0512 200 20,3012 x 1,5 100 76,4514 100 35,8514 x 1,5 100 92,9516 100 36,6516 x 1,5 50 105,9018 50 98,1518 x 1,5 50 180,7520 50 89,3520 x 1,5 50 193,6522 25 121,9022 x 1,5 25 315,0524 25 208,6524 x 1,5 25 330,5027 25 406,9530 25 573,2530 x 1,5 25 738,5033 10 753,9536 10 1053,5039 10 1301,3542 10 1564,7045 10 2106,9548 10 2788,60
Seite 160 04 / 2019
Preise per 100 Stück
Sechskantmuttern Linksgewinde
Hexagon nuts
Gewinde dm max.e min.s Nennmaß
M5L4
8,798
M6L5
11,0510
M8L6,5
14,3813
M10L8
18,9017
M12L10
21,1019
M14L11
24,4922
M16L13
26,7524
M18L15
29,5627
M20L16
32,9530
blankDIN 934
künftig ISO / EN i08674
8
Écrous à six pans
-
Abmessung VPE Preis €
6 links 1000 9,008 links 1000 13,3510 links 500 22,0012 links 500 32,3516 links 200 69,3020 links 100 109,65
Preise per 100 Stück
04 / 2019 Seite 161
Sechskantmuttern Linksgewinde
Hexagon nuts
Gewinde dm max.e min.s Nennmaß
M5L4
8,798
M6L5
11,0510
M8L6,5
14,3813
M10L8
18,9017
M12L10
21,1019
M14L11
24,4922
M16L13
26,7524
M18L15
29,5627
M20L16
32,9530
verz. blauDIN 934
künftig ISO / EN i08674
8
Écrous à six pans
-
Abmessung VPE Preis €
5 links 1000 10,456 links 1000 12,008 links 1000 17,7510 links 500 29,3012 links 500 43,1016 links 200 92,4020 links 100 146,20
Seite 162 04 / 2019
Preise per 100 Stück
Sechskantmuttern Linksgewinde
Hexagon nuts
Gewinde dm max.e min.s Nennmaß
M5L4
8,798
M6L5
11,0510
M8L6,5
14,3813
M10L8
18,9017
M12L10
21,1019
M14L11
24,4922
M16L13
26,7524
M18L15
29,5627
M20L16
32,9530
blankDIN 934
künftig ISO / EN i08674
A2
Écrous à six pans
-
Abmessung VPE Preis €
6 links 100 27,908 links 100 47,0010 links 100 90,4012 links 50 123,9514 links 50 164,2516 links 50 205,55
Preise per 100 Stück
04 / 2019 Seite 163
Stiftschrauben Einschraubende ca. 1 d
Studs
dbe
M 6186
M 8228
M 102610
M 123012
M 163816
M 204620
blankDIN 938
künftig ISO / EN
5.8
Goujons filetés
-
Abmessung VPE Preis €
6 x 35 100 26,726 x 45 100 34,408 x 20 100 25,968 x 25 100 32,248 x 30 100 33,088 x 35 100 38,608 x 40 100 41,088 x 45 100 44,968 x 50 100 45,848 x 55 100 54,848 x 60 100 65,0010 X 25 100 36,2010 X 30 100 47,1610 X 35 100 50,2410 X 40 100 50,0010 X 45 100 51,0810 X 50 100 55,6410 X 55 100 67,4810 X 60 100 73,5210 X 90 100 100,4010 X 110 100 168,6412 X 25 100 38,1612 X 30 100 48,9612 X 35 100 56,3212 X 40 100 63,6412 X 45 100 65,2412 X 50 100 78,3612 X 55 100 78,8012 X 60 100 93,2012 x 70 100 99,2012 x 110 50 153,5216 X 30 50 128,8416 X 35 50 134,7216 X 40 50 138,9216 X 45 50 139,0016 X 50 50 139,6016 X 55 50 165,5616 X 60 50 179,3616 X 65 50 193,0416 X 70 50 200,0016 X 75 50 202,32
Abmessung VPE Preis €
16 X 80 50 234,0416 X 90 50 240,0016 X 100 50 303,8016 X 130 50 586,4420 X 40 25 334,4420 X 45 25 316,4420 X 50 25 307,9620 X 55 25 361,8820 X 60 25 339,7220 X 65 25 404,2020 X 70 25 430,7620 x 75 25 448,3220 X 90 25 515,9624 X 50 25 530,9624 X 55 25 454,0424 X 60 25 457,0424 X 65 25 732,9624 X 70 25 801,7624 X 80 25 850,0024 X 90 25 882,4024 X 100 25 887,76
Seite 164 04 / 2019
Preise per 100 Stück
Stiftschrauben Einschraubende ca. 1 d
Studs
dbe
M 6186
M 8228
M 102610
M 123012
M 163816
brüniertDIN 938
künftig ISO / EN
8.8
Goujons filetés
-
Abmessung VPE Preis €
6 x 20 100 30,656 x 25 100 30,806 x 30 100 31,406 x 35 100 33,806 x 40 100 34,856 x 45 100 35,758 x 20 100 23,608 x 25 100 29,368 x 30 100 35,048 x 35 100 40,808 x 40 100 46,488 x 60 100 69,408 x 80 100 92,4810 x 20 100 36,3610 x 25 100 41,7210 x 30 100 43,2010 x 35 100 50,0810 x 40 100 57,0410 x 45 100 63,8810 x 50 100 70,7210 x 55 100 84,5210 x 60 100 84,3210 x 90 50 179,4012 x 25 100 42,6812 x 30 100 50,3212 X 35 100 57,7612 X 40 100 65,3612 X 45 100 73,0012 X 50 100 96,6012 X 55 100 97,1212 x 60 100 105,3612 x 65 50 113,7212 x 70 50 122,0812 x 80 50 138,8016 x 35 50 136,5216 x 40 50 153,0416 x 45 50 169,5216 x 50 50 186,0016 x 55 50 202,4816 x 60 50 212,8416 x 65 50 229,12
Abmessung VPE Preis €
16 x 70 50 245,2416 x 140 50 630,3620 x 75 50 661,96
Preise per 100 Stück
04 / 2019 Seite 165
Stiftschrauben Einschraubende ca. 1 d
Studs
dbe
M 6186
M 8228
M 102610
M 123012
M 163816
verz. blauDIN 938
künftig ISO / EN
8.8
Goujons filetés
-
Abmessung VPE Preis €
8 x 20 100 25,568 x 25 100 31,848 x 30 100 38,088 x 40 100 50,5210 x 25 100 49,3610 x 30 100 58,9610 x 35 100 68,4010 x 40 100 77,6410 x 45 100 86,8812 x 30 100 55,0412 x 40 100 71,5212 x 45 100 61,2812 x 60 100 125,5212 x 80 50 111,4016 x 40 50 167,4416 x 45 50 185,6416 x 50 50 221,7620 x 55 25 603,4420 x 60 25 523,08
Seite 166 04 / 2019
Preise per 100 Stück
Stiftschrauben Einschraubende ca. 1,25 d
Studs
db1)e
M 6187,5
M 82210
M 102612
M 123015
M 163820
M 204625
blankDIN 939
künftig ISO / EN
5.8
Goujons filetés
-
Abmessung VPE Preis €
5 x 16 100 36,925 x 20 100 25,485 x 40 100 30,486 x 16 100 18,806 x 20 100 17,286 x 35 100 35,006 x 45 100 36,646 x 50 100 42,846 x 60 100 52,728 x 16 100 14,008 x 20 100 15,248 x 22 100 18,168 x 25 100 17,648 x 30 100 20,888 x 40 100 28,328 x 70 100 50,608 x 100 100 97,2810 x 22 100 41,8810 x 40 100 50,6010 x 55 100 63,6810 x 60 100 68,4010 x 65 100 81,7210 x 75 50 107,5610 x 110 50 163,9210 x 140 50 378,0412 x 20 100 40,9612 x 30 100 50,1612 x 35 100 58,4012 x 40 100 69,8012 x 45 100 73,6412 x 70 100 115,4012 x 80 100 130,3612 x 95 100 147,8412 x 110 100 261,7614 x 35 100 141,3616 x 40 50 151,1616 x 50 50 171,2816 x 65 50 194,8016 x 70 50 208,0416 x 80 50 234,4016 x 90 50 284,04
Abmessung VPE Preis €
16 x 100 50 287,2816 x 130 50 428,6816 x 140 50 417,7616 x 160 50 505,6420 x 120 50 693,9220 x 150 50 917,6024 x 50 25 497,2024 x 55 25 588,6024 x 70 25 684,9627 x 70 25 1052,72
Preise per 100 Stück
04 / 2019 Seite 167
Stiftschrauben Einschraubende ca. 1,25 d
Studs
db1)e
M 6187,5
M 82210
M 102612
M 123015
M 163820
M 204625
verz. blauDIN 939
künftig ISO / EN
5.8
Goujons filetés
-
Abmessung VPE Preis €
10 x 30 100 57,3212 x 40 100 76,7212 x 50 100 101,8416 x 40 50 126,0816 x 50 50 170,8420 x 80 50 580,36
Seite 168 04 / 2019
Preise per 100 Stück
Stiftschrauben Einschraubende ca. 1,25 d
Studs
dbe
M 6187,5
M 82210
M 102612
M 123015
M 163820
brüniertDIN 939
künftig ISO / EN
8.8
Goujons filetés
-
Abmessung VPE Preis €
6 x 20 100 24,686 x 25 100 31,526 x 35 100 39,328 x 20 100 19,288 x 25 100 22,928 x 30 100 27,168 x 35 100 32,208 x 40 100 36,488 x 45 100 42,328 x 50 100 50,888 x 55 100 52,288 x 60 100 56,888 x 65 100 66,968 x 70 100 66,128 x 75 100 75,008 x 80 100 82,008 x 90 100 92,008 x 100 100 131,2010 x 20 100 32,0010 x 25 100 37,7610 x 30 100 44,3210 x 35 100 53,8410 x 40 100 56,0010 x 45 100 62,7210 x 50 100 70,7210 x 55 100 78,6810 x 60 100 87,0010 x 110 100 184,8810 x 120 100 184,7612 x 25 100 55,7212 x 35 100 67,8812 x 40 100 83,0012 x 45 100 84,5612 x 50 100 92,9212 x 55 100 101,2812 x 60 100 109,6412 x 65 50 117,9212 x 70 50 137,0812 x 75 50 145,7612 x 80 50 158,0012 x 85 50 167,28
Abmessung VPE Preis €
12 x 100 50 189,2412 x 110 50 268,6012 x 130 50 344,6812 x 140 50 453,9616 x 35 50 121,5616 x 40 50 134,6816 x 45 50 147,8416 x 50 50 161,0016 x 55 50 174,0816 x 60 50 182,1216 x 65 50 195,3616 x 70 50 208,6416 x 75 50 221,8016 x 80 50 235,0816 x 90 50 288,3216 x 100 50 317,5216 x 110 50 385,2016 x 110 50 501,1616 x 130 50 580,2416 x 140 50 698,8816 x 150 50 840,0020 x 65 50 542,1220 x 90 50 688,9220 x 100 50 763,5620 x 110 50 721,3220 x 120 50 797,7224 x 75 50 917,4424 x 100 50 1170,84
Preise per 100 Stück
04 / 2019 Seite 169
Stiftschrauben Einschraubende ca. 1,25 d
Studs
dbe
M 6187,5
M 82210
M 102612
M 123015
M 163820
verz. blauDIN 939
künftig ISO / EN
8.8
Goujons filetés
-
Abmessung VPE Preis €
6 x 12 100 37,206 x 20 100 30,686 x 25 100 40,686 x 75 100 61,608 x 16 100 30,688 x 20 100 31,408 x 25 100 37,488 x 30 100 44,608 x 35 100 54,008 x 40 100 62,728 x 50 100 90,768 x 55 100 99,408 x 60 100 108,208 x 65 100 120,008 x 80 100 141,368 x 90 100 152,968 x 100 100 180,0010 x 20 100 43,6010 x 25 100 50,3610 x 30 100 47,1610 x 35 100 55,4810 x 40 100 64,6010 x 45 100 72,1210 x 50 100 74,2010 x 55 100 87,3610 x 60 100 94,8410 x 65 100 101,8810 x 90 100 139,6010 x 100 100 168,3212 x 25 100 62,2412 x 30 100 64,0812 x 35 100 73,1612 x 40 100 82,0812 x 45 100 100,7612 x 50 100 101,6412 x 55 100 120,0012 x 60 100 130,5212 x 65 50 99,2012 x 70 50 137,7212 x 80 25 216,0412 x 85 50 240,00
Abmessung VPE Preis €
12 x 90 50 262,9212 x 100 50 258,8416 x 30 50 130,8416 x 35 50 158,3616 x 40 50 161,1616 x 45 50 176,8816 x 50 50 213,9616 x 60 50 242,1616 x 80 50 315,1616 x 90 50 400,0016 x 110 25 421,7216 x 120 25 457,2020 x 55 25 483,7620 x 110 25 990,20
Seite 170 04 / 2019
Preise per 100 Stück
Stiftschrauben Einschraubende ca. 1,25 d
Studs
dbe
M 6187,5
M 82210
M 102612
M 123015
M 163820
blankDIN 939
künftig ISO / EN
A2
Goujons filetés
-
Abmessung VPE Preis €
6 x 16 200 63,556 x 30 200 69,756 x 40 200 73,858 x 20 200 74,908 x 25 200 77,508 x 30 200 80,608 x 35 200 83,158 x 40 200 84,208 x 50 200 89,858 x 70 200 103,3010 x 20 100 95,0510 x 30 100 103,3010 x 60 100 126,3010 x 100 100 175,4012 x 25 100 131,2012 x 35 100 131,2012 x 40 100 135,8512 x 45 100 141,5012 x 50 100 148,2512 x 70 100 176,1012 x 75 100 182,3012 x 90 100 198,0012 x 100 100 224,1516 x 35 50 188,0016 x 50 50 215,3516 x 55 50 227,2516 x 60 50 236,0016 x 75 50 265,0020 x 65 50 381,1020 x 75 50 426,0520 x 80 50 442,00
Preise per 100 Stück
04 / 2019 Seite 171
Sechskantschrauben mit Schaft Feingewinde
Hexagon head bolts, metric fine pitch
d metrisch feinb bis 125 mmb bis 200 mmk Nennmaßs Nennmaß
822285,313
1026326,4
17(16)
1230367,519
1434408,8
22(21)
1638441024
184248
11,527
204652
12,530
2454601536
brüniertDIN 960
künftig ISO / EN i08765
8.8
Vis à tête hexagonale, partiellement filetées métr
-
Abmessung VPE Preis €
10 x 1 x 40 200 60,8410 x 1 x 45 200 42,6510 x 1 x 50 200 71,4010 x 1 x 60 100 81,4810 x 1 x 65 100 86,9410 x 1 x 70 100 92,1610 x 1 x 80 100 103,0210 x 1 x 90 100 109,5610 x 1 x 100 100 115,1810 x 1 x 110 50 120,7910 x 1,25 x 80 100 109,0810 x 1,25 x 90 100 122,0412 x 1,25 x 70 50 126,4012 x 1,5 x 45 100 90,0612 x 1,5 x 50 100 97,3212 x 1,5 x 60 100 113,9412 x 1,5 x 65 50 120,0012 x 1,5 x 70 50 129,3012 x 1,5 x 80 50 144,7812 x 1,5 x 90 50 159,9612 x 1,5 x 100 50 174,9012 x 1,5 x 110 50 188,8812 x 1,5 x 120 50 202,9812 x 1,5 x 130 50 217,8614 x 1,5 x 80 50 220,0014 x 1,5 x 90 50 230,0014 x 1,5 x 100 50 244,2614 x 1,5 x 120 50 304,6216 x 1,5 x 55 50 196,8616 x 1,5 x 60 50 210,8416 x 1,5 x 65 25 226,2616 x 1,5 x 70 25 239,3416 x 1,5 x 75 25 253,5616 x 1,5 x 80 25 264,4816 x 1,5 x 90 25 297,2416 x 1,5 x 100 25 321,9016 x 1,5 x 110 25 340,8016 x 1,5 x 120 25 363,1816 x 1,5 x 130 25 387,7816 x 1,5 x 140 25 412,2016 x 1,5 x 150 25 438,12
Abmessung VPE Preis €
20 x 1,5 x 70 25 406,7420 x 1,5 x 75 25 427,7420 x 1,5 x 80 25 449,0420 x 1,5 x 90 25 491,1620 x 1,5 x 100 25 533,4620 x 1,5 x 110 25 575,6420 x 1,5 x 120 25 617,8820 x 1,5 x 140 25 700,6220 x 1,5 x 150 25 742,8624 x 1,5 x 100 10 870,2424 x 2,0 x 80 25 908,0424 x 2,0 x 90 25 986,4024 x 2,0 x 100 10 1041,9624 x 2,0 x 120 10 1169,5824 x 2,0 x 130 10 1246,8624 x 2,0 x 140 10 1317,8424 x 2,0 x 150 10 1397,82
Seite 172 04 / 2019
Preise per 100 Stück
Sechskantschrauben mit Schaft Feingewinde
Hexagon head bolts, metric fine pitch
d metrisch feinb bis 125 mmb bis 200 mmk Nennmaßs Nennmaß
822285,313
1026326,4
17(16)
1230367,519
1434408,8
22(21)
1638441024
184248
11,527
204652
12,530
2454601536
verz. blauDIN 960
künftig ISO / EN i08765
8.8
Vis à tête hexagonale, partiellement filetées métr
-
Abmessung VPE Preis €
12x1,25x130 50 347,5212x1,5x50 100 141,1212x1,5x60 100 166,1412x1,5x70 50 187,0812x1,5x90 50 231,7214x1,5x50 50 226,6816x1,5x80 25 360,9016x1,5x90 25 398,1616x1,5x140 25 572,82
Preise per 100 Stück
04 / 2019 Seite 173
Sechskantschrauben mit Schaft Feingewinde
Hexagon head bolts, metric fine pitch
d metrisch feinb bis 125 mmb bis 200 mmk Nennmaßs Nennmaß
822285,313
1026326,4
17(16)
1230367,519
1434408,8
22(21)
1638441024
184248
11,527
204652
12,530
2454601536
brüniertDIN 960
künftig ISO / EN i08765
10.9
Vis à tête hexagonale, partiellement filetées métr
-
Abmessung VPE Preis €
10 x 1 x 50 100 87,4810 x 1 x 60 100 99,8412 x 1,5 x 60 50 146,3412 x 1,5 x 65 50 157,5612 x 1,5 x 70 50 165,8412 x 1,5 x 80 50 185,7612 x 1,5 x 100 50 224,2814 x 1,5 x 50 50 204,2414 x 1,5 x 55 50 218,6414 x 1,5 x 60 50 233,7014 x 1,5 x 70 50 257,9414 x 1,5 x 80 50 284,2214 x 1,5 x 90 50 316,8014 x 1,5 x 110 25 400,2016 x 1,5 x 60 50 304,6816 x 1,5 x 90 25 428,8216 x 1,5 x 100 25 461,7016 x 1,5 x 110 25 491,2816 x 1,5 x 140 25 595,2018 x 1,5 x 100 25 765,7220 x 1,5 x 65 25 529,9820 x 1,5 x 70 25 559,0224 x 2 130 25 1222,2624 x 2 x 130 10 1400,46
Seite 174 04 / 2019
Preise per 100 Stück
Sechskantschrauben mit Gewinde bis Kopf Feingewind
Hexagon head set screws, metric tine pitch
d metrisch feink Nennmaßa max.s Nennmaß
85,3
313
106,4
317(16)
127,54,519
148,84,5
22(21)
16104,524
1811,54,527
2012,54,530
brüniertDIN 961
künftig ISO / EN i08676
8.8
Vis à tête hexagonale, entièrement filetées métriq
-
Abmessung VPE Preis €
8 x 1 x 16 200 24,008 x 1 x 20 200 25,688 x 1 x 25 200 29,108 x 1 x 30 200 32,288 x 1 x 35 200 35,708 x 1 x 40 200 38,228 x 1 x 45 200 41,528 x 1 x 50 200 45,2410 x 1 x 16 200 51,3610 x 1 x 20 200 56,6410 x 1 x 25 200 63,3610 x 1 x 30 200 69,9610 x 1 x 35 100 76,8010 x 1 x 40 100 83,3410 x 1 x 45 100 85,6210 x 1 x 50 100 91,8610 x 1,25 x 20 200 50,9410 x 1,25 x 25 200 57,0010 x 1,25 x 30 200 63,0610 x 1,25 x 35 100 69,0610 x 1,25 x 50 100 87,1812 x 1,25 x 40 100 95,5212 x 1,25 x 45 100 103,3212 x 1,25 x 60 100 124,0212 x 1,5 x 20 100 73,1412 x 1,5 x 25 100 81,7812 x 1,5 x 30 100 90,3012 x 1,5 x 35 100 99,0612 x 1,5 x 40 100 107,7012 x 1,5 x 45 100 116,2812 x 1,5 x 50 100 124,6812 x 1,5 x 60 100 139,5612 x 1,5 x 70 50 159,1212 x 1,5 x 100 50 223,1414 x 1,5 x 20 100 137,0414 x 1,5 x 25 100 111,0614 x 1,5 x 30 100 123,0614 x 1,5 x 35 100 133,4414 x 1,5 x 40 100 144,6614 x 1,5 x 45 50 156,8414 x 1,5 x 50 50 166,92
Abmessung VPE Preis €
14 x 1,5 x 55 50 180,3614 x 1,5 x 60 50 191,5216 x 1,5 x 20 50 155,3416 x 1,5 x 25 50 164,4616 x 1,5 x 30 50 165,7216 x 1,5 x 35 50 180,7216 x 1,5 x 40 50 195,6616 x 1,5 x 45 50 210,5416 x 1,5 x 50 50 223,3216 x 1,5 x 55 50 238,5016 x 1,5 x 60 50 253,6216 x 1,5 x 65 50 266,7616 x 1,5 x 70 50 281,8816 x 1,5 x 80 25 312,3016 x 1,5 x 90 25 340,5616 x 1,5 x 100 25 368,6420 x 1,5 x 35 25 361,8620 x 1,5 x 40 25 333,7220 x 1,5 x 45 25 357,4820 x 1,5 x 50 25 381,3620 x 1,5 x 55 25 403,1420 x 1,5 x 60 25 424,6220 x 1,5 x 65 25 448,5020 x 1,5 x 70 25 470,2820 x 1,5 x 80 25 515,76
Preise per 100 Stück
04 / 2019 Seite 175
Sechskantschrauben mit Gewinde bis Kopf Feingewind
Hexagon head set screws, metric tine pitch
d metrisch feink Nennmaßa max.s Nennmaß
85,3
313
106,4
317(16)
127,54,519
148,84,5
22(21)
16104,524
1811,54,527
2012,54,530
verz. blauDIN 961
künftig ISO / EN i08676
8.8
Vis à tête hexagonale, entièrement filetées métriq
-
Abmessung VPE Preis €
8 x 1 x 20 200 29,3410x1x40 100 81,3010x1x50 100 94,4410x1,25x20 200 55,2610x1,25x25 200 61,8010x1,25x30 200 68,2810x1,25x35 100 74,8210x1,25x40 100 81,1210x1,25x45 100 87,7810x1,25x50 100 93,9012x1,25x25 100 78,2412x1,25x30 100 86,4612x1,25x35 100 94,6812x1,25x45 100 148,2612x1,5x25 100 78,2412x1,5x30 100 86,4612x1,5x35 100 94,6812x1,5x40 100 103,0212x1,5x45 100 109,1412x1,5x50 100 118,9812x1,5x80 50 228,8414x1,5x50 50 189,9616x1,5x30 50 189,7816x1,5x35 50 206,9416x1,5x45 50 241,2016x1,5x50 50 255,9016x1,5x60 50 290,6416x1,5x70 50 322,9216x1,5x80 25 357,6616x1,5x100 25 422,1618x1,5x80 25 500,2220x1,5x30 50 372,7220x1,5x35 50 378,1820x1,5x40 50 382,3220x1,5x50 25 436,9220x1,5x60 25 486,54
Seite 176 04 / 2019
Preise per 100 Stück
Sechskantschrauben mit Gewinde bis Kopf Feingewind
Hexagon head set screws, metric tine pitch
d metrisch feink Nennmaßa max.s Nennmaß
85,3
313
106,4
317(16)
127,54,519
148,84,5
22(21)
16104,524
1811,54,527
2012,54,530
brüniertDIN 961
künftig ISO / EN i08676
10.9
Vis à tête hexagonale, entièrement filetées métriq
-
Abmessung VPE Preis €
8 x 1 x 25 200 40,2010 x 1 x 25 200 67,3810 x 1 x 30 200 74,4010 x 1 x 35 100 81,4810 x 1 x 40 100 88,6812 x 1 x 25 100 96,5410 x 1,25 x 35 100 81,4812 x 1,25 x 25 100 96,5412 x 1,25 x 60 100 164,8212 x 1,25 x 70 50 187,9812 x 1,5 x 20 100 67,4012 x 1,5 x 25 100 64,6012 x 1,5 x 30 100 68,0012 x 1,5 x 35 100 71,4512 x 1,5 x 40 100 74,9512 x 1,5 x 45 100 82,5512 x 1,5 x 50 100 85,9514 x 1,5 x 30 100 160,5014 x 1,5 x 35 100 174,1214 x 1,5 x 40 100 188,8814 x 1,5 x 45 50 205,0814 x 1,5 x 50 50 218,0414 x 1,5 x 70 50 269,7616 x 1,5 x 30 50 215,6416 x 1,5 x 35 50 235,2016 x 1,5 x 40 50 254,6416 x 1,5 x 45 50 274,0816 x 1,5 x 50 50 290,7616 x 1,5 x 55 50 310,5016 x 1,5 x 60 50 330,4218 x 1,5 x 30 50 290,4620 x 1,5 x 45 25 399,24
Preise per 100 Stück
04 / 2019 Seite 177
Senkschrauben mit Schlitz
Slotted countersunk (flat) head screws
ddk max.k max.
M 23,81,2
M 2,54,71,5
M 35,6
1,65
M 47,52,2
M 59,22,5
M 6113
M 814,5
4
M 10185
M 12226
M 16298
verz. blauDIN 963
künftig ISO / EN i02009
4.8
Vis a tête fraisée
-
Abmessung VPE Preis €
2 x 4 2000 2,852 x 5 2000 1,902 x 6 2000 1,752 x 8 2000 1,802 x 10 2000 1,902 x 12 2000 1,902 x 14 2000 2,952 x 16 2000 2,252 x 18 2000 3,902 x 20 2000 3,902,5 x 4 2000 3,402,5 x 5 2000 2,802,5 x 6 2000 1,752,5 x 8 2000 1,752,5 x 10 2000 1,802,5 x 12 2000 1,902,5 x 14 2000 2,502,5 x 16 2000 2,202,5 x 18 2000 3,402,5 x 20 2000 3,402,5 x 22 2000 4,002,5 x 25 2000 4,002,5 x 30 2000 5,353 x 5 2000 5,303 x 6 2000 4,053 x 8 2000 2,253 x 10 2000 2,203 x 12 2000 2,303 x 16 2000 3,003 x 18 2000 3,453 x 20 2000 3,453 x 22 2000 4,203 x 25 2000 4,203 x 30 2000 4,603 x 35 1000 6,203 x 40 1000 6,653 x 45 1000 8,753 x 50 1000 9,653 x 60 1000 13,103,5 x 5 2000 4,253,5 x 6 2000 4,25
Abmessung VPE Preis €
3,5 x 8 2000 2,653,5 x 10 2000 2,653,5 x 12 2000 2,753,5 x 16 2000 3,253,5 x 20 2000 3,503,5 x 25 2000 4,453,5 x 30 1000 5,054 x 6 2000 4,404 x 8 2000 3,054 x 10 2000 3,054 x 12 2000 3,154 x 16 2000 3,454 x 18 2000 3,504 x 20 500 3,504 x 22 2000 4,854 x 25 1000 4,854 x 30 1000 5,504 x 35 1000 6,504 x 40 1000 7,054 x 45 1000 8,754 x 50 500 9,704 x 55 500 12,504 x 60 500 13,354 x 65 500 20,754 x 70 500 20,755 x 8 2000 4,355 x 10 2000 4,505 x 12 1000 4,855 x 16 1000 5,055 x 18 1000 5,505 x 20 1000 5,505 x 22 1000 5,905 x 25 1000 5,905 x 30 1000 7,305 x 35 500 9,305 x 40 500 10,305 x 45 500 10,655 x 50 500 11,405 x 55 500 14,505 x 60 500 13,505 x 65 500 21,45
Abmessung VPE Preis €
5 x 70 500 22,055 x 75 500 22,205 x 80 500 22,206 x 8 1000 8,106 x 10 1000 6,106 x 12 1000 6,256 x 16 1000 6,856 x 18 1000 7,456 x 20 1000 7,456 x 22 500 8,406 x 25 500 8,406 x 30 500 9,156 x 35 500 11,056 x 40 500 12,056 x 45 500 13,406 x 50 200 14,606 x 55 200 15,906 x 60 200 16,806 x 65 200 22,306 x 70 200 23,156 x 75 200 25,406 x 80 200 25,408 x 16 500 14,058 x 18 500 15,008 x 20 500 15,008 x 22 500 17,558 x 25 500 15,958 x 30 200 17,508 x 35 200 17,508 x 40 200 19,108 x 45 200 20,158 x 50 200 21,058 x 55 200 23,108 x 60 200 24,058 x 65 200 28,608 x 70 200 28,308 x 75 100 43,708 x 80 100 43,7010 x 16 200 33,4510 x 20 200 21,7010 x 25 200 22,65
Seite 178 04 / 2019
Preise per 100 Stück
Senkschrauben mit Schlitz
Slotted countersunk (flat) head screws
ddk max.k max.
M 23,81,2
M 2,54,71,5
M 35,6
1,65
M 47,52,2
M 59,22,5
M 6113
M 814,5
4
M 10185
M 12226
M 16298
verz. blauDIN 963
künftig ISO / EN i02009
4.8
Vis a tête fraisée
-
Abmessung VPE Preis €
10 x 30 200 24,7510 x 35 200 26,9010 x 40 200 28,3510 x 45 100 30,4010 x 50 100 32,5010 x 55 100 37,1510 x 60 100 37,9510 x 65 100 42,5510 x 70 100 42,2010 x 75 100 67,3010 x 80 100 67,3012 x 20 100 153,1512 x 25 100 142,2012 x 30 100 147,0012 x 35 100 155,2512 x 40 100 158,0012 x 45 100 173,8012 x 50 100 184,8012 x 60 100 214,3512 x 70 100 241,1012 x 80 50 270,6012 x 90 50 300,1512 x 100 50 340,05
Preise per 100 Stück
04 / 2019 Seite 179
Senkschrauben mit Schlitz
Slotted countersunk (flat) head screws
ddk max.k max.
M 23,81,2
M 2,54,71,5
M 35,6
1,65
M 47,52,2
M 59,22,5
M 6113
M 814,5
4
M 10185
blankDIN 963
künftig ISO / EN i02009
A2
Vis a tête fraisée
-
Abmessung VPE Preis €
2 x 4 1000 3,602 x 5 1000 2,602 x 6 1000 2,702 x 8 1000 2,852 x 10 1000 3,152 x 12 1000 3,352 x 16 1000 3,602 x 20 1000 4,752 x 25 500 5,602,5 x 4 1000 3,602,5 x 5 1000 2,602,5 x 6 1000 2,702,5 x 8 1000 2,852,5 x 10 1000 3,152,5 x 12 1000 3,352,5 x 16 1000 3,602,5 x 20 1000 4,753 x 4 500 3,853 x 5 500 3,553 x 6 500 2,303 x 8 500 2,103 x 10 500 1,953 x 12 500 2,003 x 14 500 2,903 x 16 500 2,253 x 18 500 3,353 x 20 500 2,603 x 22 500 4,253 x 25 500 3,253 x 30 500 4,853 x 35 500 7,003 x 40 500 9,003 x 45 200 18,553 x 50 200 18,553,5 x 6 500 10,253,5 x 8 500 10,253,5 x 10 500 10,003,5 x 12 500 10,953,5 x 16 500 11,903,5 x 20 500 14,504 x 5 500 5,05
Abmessung VPE Preis €
4 x 6 500 3,554 x 8 500 3,354 x 10 500 2,954 x 12 500 2,704 x 14 500 3,904 x 16 500 3,004 x 18 500 4,054 x 20 500 3,104 x 22 500 4,704 x 25 500 3,654 x 30 500 4,654 x 35 500 6,654 x 40 500 8,354 x 45 500 13,604 x 50 500 13,604 x 60 500 16,954 x 70 200 29,955 x 6 500 7,355 x 8 500 4,655 x 10 500 4,655 x 12 500 3,605 x 14 500 5,205 x 16 500 4,005 x 18 500 5,705 x 20 500 4,405 x 22 500 7,005 x 25 500 5,405 x 30 500 6,205 x 35 500 7,705 x 40 500 9,655 x 45 200 12,105 x 50 200 15,755 x 55 200 24,455 x 60 200 24,455 x 70 200 29,755 x 80 200 34,105 x 90 200 39,055 x 100 200 43,406 x 8 500 8,706 x 10 500 5,806 x 12 500 5,60
Abmessung VPE Preis €
6 x 14 500 6,756 x 16 500 5,206 x 18 500 7,756 x 20 500 6,006 x 22 200 8,956 x 25 200 6,906 x 30 200 7,806 x 35 200 9,656 x 40 200 12,506 x 45 200 13,406 x 50 200 19,056 x 55 200 29,856 x 60 200 29,856 x 70 200 37,206 x 80 200 45,256 x 90 200 50,856 x 100 100 56,306 x 110 100 105,356 x 120 100 113,608 x 12 200 13,608 x 16 200 13,308 x 20 200 13,808 x 25 200 16,558 x 30 200 17,558 x 35 200 19,658 x 40 200 21,708 x 45 200 26,358 x 50 200 28,408 x 55 100 41,358 x 60 100 41,358 x 70 100 56,308 x 80 100 65,608 x 90 100 74,908 x 100 100 84,208 x 110 100 157,508 x 120 100 173,0010 x 16 100 44,4510 x 20 100 27,9010 x 25 100 29,9510 x 30 100 32,0510 x 35 100 35,15
Seite 180 04 / 2019
Preise per 100 Stück
Senkschrauben mit Schlitz
Slotted countersunk (flat) head screws
ddk max.k max.
M 23,81,2
M 2,54,71,5
M 35,6
1,65
M 47,52,2
M 59,22,5
M 6113
M 814,5
4
M 10185
blankDIN 963
künftig ISO / EN i02009
A2
Vis a tête fraisée
-
Abmessung VPE Preis €
10 x 40 100 39,8010 x 45 100 47,5510 x 50 100 50,1010 x 55 100 65,1010 x 60 100 65,1010 x 70 50 119,3010 x 80 50 141,5010 x 90 50 163,2010 x 100 50 184,9010 x 110 50 258,2510 x 120 50 284,05
Preise per 100 Stück
04 / 2019 Seite 181
Senkschrauben mit Kreuzschlitz
Cross recessed countersunk (flat) head screws
d1dkkKreuzschlitz-Nr.
M 2,54,71,5
1
M 35,6
1,651
M 47,52,2
2
M 59,22,5
2
M 61133
M 814,5
44
verz. blauDIN 965
künftig ISO / EN i07046
4.8
Vis à tête fraisée, à empreinte cruciforme
-
Abmessung VPE Preis €
2,5 x 4 2000 3,152,5 x 5 2000 3,152,5 x 6 2000 3,152,5 x 8 2000 1,752,5 x 10 2000 1,852,5 x 12 2000 1,953 x 4 2000 3,153 x 5 2000 3,153 x 6 2000 3,153 x 8 2000 1,803 x 10 2000 1,903 x 12 2000 1,953 x 16 2000 2,453 x 18 2000 3,203 x 20 2000 2,553 x 25 2000 3,303 x 30 2000 4,103 x 35 1000 6,053 x 40 1000 6,903 x 45 1000 7,903 x 50 1000 8,654 x 6 2000 4,704 x 8 2000 2,504 x 10 2000 2,554 x 12 2000 2,754 x 16 2000 3,054 x 18 2000 4,054 x 20 2000 3,254 x 25 1000 3,754 x 30 1000 4,854 x 35 1000 6,054 x 40 1000 6,904 x 45 1000 8,004 x 50 500 10,304 x 60 500 14,704 x 70 500 19,604 x 80 500 25,055 x 8 2000 4,305 x 10 2000 3,455 x 12 1000 3,555 x 16 1000 4,00
Abmessung VPE Preis €
5 x 18 1000 5,355 x 20 1000 4,455 x 25 1000 5,005 x 30 1000 6,405 x 35 1000 7,055 x 40 500 7,605 x 45 500 8,955 x 50 500 11,605 x 60 500 14,705 x 70 500 21,355 x 80 500 27,306 x 12 1000 5,106 x 16 1000 5,856 x 18 1000 7,256 x 20 1000 6,456 x 25 500 7,306 x 30 500 8,306 x 35 500 9,606 x 40 500 10,706 x 45 500 12,606 x 50 200 14,306 x 60 200 17,156 x 70 200 21,706 x 80 200 32,508 x 16 500 13,508 x 18 500 14,158 x 20 500 14,008 x 25 500 15,558 x 30 200 17,658 x 35 200 19,858 x 40 200 24,758 x 45 200 26,208 x 50 200 27,358 x 60 200 31,308 x 70 200 38,108 x 80 200 46,45
Seite 182 04 / 2019
Preise per 100 Stück
Senkschrauben mit Kreuzschlitz
Cross recessed countersunk (flat) head screws
d1dkkKreuzschlitz-Nr.
M 23,81,2
M 2,54,71,5
M 35,6
1,651
M 47,52,2
2
M 59,22,5
2
M 61133
M 814,5
44
M 101855
blankDIN 965
künftig ISO / EN i07046
A2
Vis à tête fraisée, à empreinte cruciforme
-
Abmessung VPE Preis €
2 x 4 1000 4,452 x 5 1000 4,252 x 6 1000 3,852 x 8 1000 3,852 x 20 1000 5,752,5 x 4 1000 4,452,5 x 5 1000 4,252,5 x 6 1000 3,952,5 x 8 1000 4,102,5 x 10 1000 4,352,5 x 12 1000 4,652,5 x 20 1000 6,253 x 4 500 4,603 x 5 500 4,303 x 6 500 3,953 x 8 500 3,653 x 10 500 3,503 x 12 500 3,853 x 16 500 4,503 x 18 500 6,203 x 20 500 5,003 x 25 500 6,303 x 30 500 8,953 x 40 500 15,054 x 6 500 6,204 x 8 500 5,704 x 10 500 5,154 x 12 500 5,004 x 14 500 7,154 x 16 500 5,754 x 20 500 6,504 x 25 500 7,204 x 30 500 9,754 x 35 500 15,654 x 40 500 16,554 x 45 500 29,454 x 50 500 29,455 x 6 500 11,055 x 8 500 8,655 x 10 500 7,305 x 12 500 7,50
Abmessung VPE Preis €
5 x 14 500 10,405 x 16 500 8,355 x 18 500 10,955 x 20 500 8,805 x 25 500 10,155 x 30 500 12,005 x 35 500 14,855 x 40 500 19,355 x 45 500 25,005 x 50 200 30,505 x 60 500 35,155 x 70 500 40,806 x 8 500 13,306 x 10 500 12,306 x 12 500 10,656 x 16 500 11,606 x 20 500 13,306 x 25 200 14,706 x 30 200 18,156 x 35 200 19,456 x 40 200 22,556 x 45 200 26,706 x 50 200 35,256 x 60 200 43,206 x 70 200 51,156 x 80 200 58,906 x 90 200 66,658 x 16 200 27,908 x 20 200 30,258 x 25 200 32,308 x 30 200 37,458 x 40 200 48,058 x 45 200 67,15
Preise per 100 Stück
04 / 2019 Seite 183
Senkschrauben mit TX
Cross recessed countersunk (flat) head screws
d1dkkTX-Nr.
M 2,54,71,5
8
M 35,6
1,6510
M 47,52,220
M 59,22,525
M 6113
30
M 814,5
445
verz. blauDIN 965
künftig ISO / EN i07046
4.8
weitere Durchmesser unter ISO 14581
-
Abmessung VPE Preis €
4 x 6 2000 2,504 x 8 2000 2,204 x 10 2000 2,404 x 12 2000 2,704 x 16 2000 3,104 x 20 2000 4,004 x 25 2000 4,604 x 30 2000 5,304 x 35 2000 6,304 x 40 2000 5,304 x 45 1000 6,704 x 50 500 7,20
Seite 184 04 / 2019
Preise per 100 Stück
Senkschrauben mit TX
Cross recessed countersunk (flat) head screws
d1dkkTX-Nr.
M 23,81,2
6
M 2,54,71,5
8
M 35,6
1,6510
M 47,52,220
M 59,22,525
M 6113
30
M 814,5
445
M 10185
50
blankDIN 965
künftig ISO / EN i07046
A2
weitere Durchmesser unter ISO 14581
-
Abmessung VPE Preis €
4 x 6 500 6,204 x 8 500 5,704 x 10 500 5,154 x 12 500 5,004 x 14 500 7,154 x 16 500 5,754 x 18 500 6,004 x 20 500 6,504 x 25 500 7,204 x 30 500 9,754 x 35 500 15,654 x 40 500 16,554 x 45 500 29,454 x 50 500 29,45
Preise per 100 Stück
04 / 2019 Seite 185
Linsensenkschrauben mit Kreuzschlitz
Cross recessed raised countersunk head screws
d1dkkKreuzschlitz-Nr.
M 2,54,71,5
1
M 35,6
1,651
M 47,52,2
2
M 59,22,5
2
M 61133
M 814,5
44
verz. blauDIN 966
künftig ISO / EN i07047
4.8
Vis à tête fraisée, bombée, à empreinte cruciforme
-
Abmessung VPE Preis €
3 x 5 2000 4,503 x 6 2000 3,453 x 8 2000 1,953 x 10 2000 2,003 x 12 2000 2,053 x 16 2000 2,553 x 18 2000 3,853 x 20 2000 2,803 x 25 2000 3,553 x 30 2000 4,403 x 35 1000 6,503 x 40 1000 7,404 x 6 2000 5,004 x 8 2000 2,754 x 10 2000 2,804 x 12 2000 2,954 x 16 2000 3,254 x 18 2000 4,954 x 20 2000 3,454 x 25 1000 4,054 x 30 1000 5,254 x 35 1000 6,604 x 40 1000 7,504 x 45 1000 8,754 x 50 500 11,104 x 60 500 16,005 x 8 2000 7,105 x 10 2000 3,755 x 12 1000 3,855 x 16 1000 4,355 x 18 1000 5,555 x 20 1000 4,855 x 25 1000 5,405 x 30 1000 6,905 x 35 1000 7,655 x 40 500 8,205 x 45 500 9,655 x 50 500 12,605 x 60 500 15,905 x 70 500 23,205 x 80 500 29,55
Abmessung VPE Preis €
6 x 10 1000 5,706 x 12 1000 5,606 x 16 1000 6,306 x 18 1000 7,606 x 20 1000 7,006 x 25 500 7,856 x 30 500 9,006 x 35 500 10,406 x 40 500 11,606 x 45 500 13,656 x 50 200 15,556 x 60 200 18,156 x 70 200 24,756 x 80 200 35,058 x 16 500 14,408 x 18 500 14,658 x 20 500 14,758 x 25 500 16,508 x 30 200 18,808 x 35 200 21,158 x 40 200 26,308 x 45 200 27,908 x 50 200 29,158 x 60 200 34,308 x 70 200 41,158 x 80 200 50,15
Seite 186 04 / 2019
Preise per 100 Stück
Linsensenkschrauben mit Kreuzschlitz
Cross recessed raised countersunk head screws
d1dkkKreuzschlitz-Nr.
M 35,6
1,651
M 47,52,2
2
M 59,22,5
2
M 61133
M 814,5
44
blankDIN 966
künftig ISO / EN i07047
A2
Vis à tête fraisée, bombée, à empreinte cruciforme
-
Abmessung VPE Preis €
3 x 5 500 4,303 x 6 500 3,953 x 8 500 3,653 x 10 500 3,503 x 12 500 3,853 x 16 500 4,504 x 6 500 6,204 x 8 500 5,704 x 10 500 5,154 x 12 500 5,004 x 14 500 7,154 x 16 500 5,754 x 20 500 6,504 x 25 500 7,204 x 30 500 9,754 x 40 500 16,555 x 6 500 11,055 x 8 500 8,655 x 10 500 7,305 x 12 500 7,505 x 16 500 8,355 x 18 500 10,955 x 20 500 8,805 x 25 500 10,155 x 30 500 12,005 x 35 500 14,855 x 40 500 19,355 x 45 200 23,305 x 50 200 30,505 x 60 200 35,156 x 10 500 12,306 x 16 500 11,606 x 20 500 13,306 x 25 200 14,706 x 30 200 18,156 x 40 200 22,556 x 45 200 26,706 x 50 200 35,256 x 60 200 43,208 x 12 200 29,958 x 16 200 27,90
Abmessung VPE Preis €
8 x 20 200 29,908 x 25 200 32,308 x 30 200 37,458 x 35 200 42,958 x 40 200 47,558 x 45 200 67,158 x 50 200 67,15
Preise per 100 Stück
04 / 2019 Seite 187
Gewindeenden Form A ohne Kuppe
Stud bolts
d x l
blankDIN 976
künftig ISO / EN
4.8
Bouts filetées
-
Abmessung VPE Preis €
2 x 1000 5 404,553 x 1000 5 81,754 x 1000 5 59,955 x 1000 5 89,956 x 1000 5 151,306 x 2000 5 355,506 x 3000 5 558,708 x 1000 5 181,258 x 2000 1 585,408 x 3000 1 921,7010 x 1000 5 284,8010 x 2000 1 723,7510 x 3000 1 1150,4012 x 1000 5 367,9012 x 2000 1 857,0012 x 3000 1 1348,9014 x 1000 1 705,8014 x 2000 1 1355,1014 x 3000 1 2132,5516 x 1000 1 664,9016 x 2000 1 1666,1516 x 3000 1 2499,2518 x 1000 1 1066,9018 x 2000 1 1953,3018 x 3000 1 3074,7520 x 1000 1 1026,0020 x 2000 1 2414,8020 x 3000 1 3618,6522 x 1000 1 2011,0522 x 1000 1 3121,6022 x 3000 1 4678,4024 x 1000 1 1724,9524 x 2000 1 3525,7024 x 3000 1 5284,1527 x 1000 1 2114,6030 x 1000 1 3139,2033 x 1000 1 3578,2036 x 1000 1 4857,35
Seite 188 04 / 2019
Preise per 100 Stück
Gewindeenden Form A ohne Kuppe
Stud bolts
d x l
verz. blauDIN 976
künftig ISO / EN
4.8
Bouts filetées
-
Abmessung VPE Preis €
2 x 1000 5 440,352,5 x 1000 5 456,803 x 1000 5 98,104 x 1000 5 114,455 x 1000 5 141,706 x 1000 5 157,606 x 2000 1 438,456 x 3000 1 657,708 x 1000 5 206,358 x 2000 1 725,308 x 3000 1 1087,2010 x 1000 5 278,0510 x 2000 1 954,0010 x 3000 1 1431,3012 x 1000 1 393,4012 x 2000 1 1157,9512 x 3000 1 1736,9014 x 1000 1 610,5014 x 2000 1 1763,7514 x 3000 1 2645,5016 x 1000 1 716,0016 x 2000 1 2128,4016 x 3000 1 3192,9018 x 1000 1 1103,1018 x 2000 1 2612,5018 x 3000 1 3916,0520 x 1000 1 1141,2520 x 2000 1 3128,3020 x 3000 1 4692,1022 x 1000 1 1667,7022 x 2000 1 4029,9022 x 3000 1 5999,0524 x 1000 1 1799,6024 x 2000 1 4554,8524 x 3000 1 6828,0527 x 1000 1 2813,3030 x 1000 1 3060,2033 x 1000 1 4574,7036 x 1000 1 5392,80
Preise per 100 Stück
04 / 2019 Seite 189
Gewindeenden Form A ohne Kuppe
Stud bolts
d x l
blankDIN 976
künftig ISO / EN
8.8
Bouts filetées
-
Abmessung VPE Preis €
4 x 1000 5 940,155 x 1000 5 376,056 x 1000 5 159,908 x 1000 5 406,0510 x 1000 1 535,5012 x 1000 1 712,6514 x 1000 1 1035,5016 x 1000 1 1143,2018 x 1000 1 1779,4520 x 1000 1 1750,8522 x 1000 1 2399,4024 x 1000 1 2490,6527 x 1000 1 3482,5530 x 1000 1 4640,70
Seite 190 04 / 2019
Preise per 100 Stück
Gewindeenden Form A ohne Kuppe
Stud bolts
d x l
verz. blauDIN 976
künftig ISO / EN
8.8
Bouts filetées
-
Abmessung VPE Preis €
4 x 1000 5 392,405 x 1000 5 554,056 x 1000 5 155,108 x 1000 1 387,408 x 2000 1 969,0010 x 1000 5 525,4010 x 2000 1 1313,0010 x 3000 1 1840,0012 x 1000 1 693,2512 x 2000 1 1733,0014 x 1000 1 984,2516 x 1000 1 997,3516 x 2000 1 2493,0018 x 1000 1 1445,6520 x 1000 1 1830,1022 x 1000 1 2692,3024 x 1000 1 2677,5027 x 1000 1 3802,2530 x 1000 1 4850,5036 x 1000 1 7891,60
Preise per 100 Stück
04 / 2019 Seite 191
Gewindeenden Form A ohne Kuppe
Stud bolts
d x l
blankDIN 976
künftig ISO / EN
A2
Bouts filetées
-
Abmessung VPE Preis €
2 x 1000 20 800,452,5 x 1000 20 800,453 x 1000 20 260,804 x 1000 20 214,355 x 1000 20 273,706 x 1000 20 320,208 x 1000 20 451,8510 x 1000 20 642,9512 x 1000 20 906,3014 x 1000 10 1270,4016 x 1000 10 1533,7518 x 1000 10 2083,7020 x 1000 5 2452,9522 x 1000 5 3428,9524 x 1000 5 3434,1027 x 1000 5 4936,8530 x 1000 5 6403,4533 x 1000 5 9037,1036 x 1000 5 12393,75
Seite 192 04 / 2019
Preise per 100 Stück
Sechskantmuttern mit Klemmteil, Form V, Ganzmetall
Full metal self-locking hexagon nuts
dh max.s
M 44,8
7
M 568
M 66,610
M 88,813
M 101117
M 1213,2
19
M 1415,4
22
M 1617,6
24
M 1819,8
27
M 202230
M 2224,2
32
M 2426,4
36
verz. blauDIN 980
künftig ISO / EN
8
Ecrous de sécurité hexagonaux
-
Abmessung VPE Preis €
4 1000 5,955 1000 6,106 1000 8,008 1000 9,7010 500 17,3012 500 25,6514 200 42,0016 200 48,6018 100 104,6520 100 108,5522 50 186,9024 50 193,7027 25 347,6030 25 394,2533 25 772,0036 25 818,70
Preise per 100 Stück
04 / 2019 Seite 193
Sechskantmuttern mit Klemmteil, Form V, Ganzmetall
Full metal self-locking hexagon nuts
dh max.m min.s
M 44,82,4
7
M 5638
M 66,63,610
M 88,84,813
M 10116
17
M 1213,27,219
M 1415,48,422
M 1617,69,624
M 1819,810,8
27
M 20221230
M 2224,213,2
32
M 2426,414,4
36
blankDIN 980
künftig ISO / EN
A2
Ecrous de sécurité hexagonaux
-
Abmessung VPE Preis €
4 500 30,505 500 33,506 500 36,158 500 55,8010 200 87,8012 200 130,6516 100 240,1520 50 311,90
Seite 194 04 / 2019
Preise per 100 Stück
Sechskantmuttern selbstsichernd hohe Form
Self-locking hexagon nuts, heavy type
dh max.m min.s
M 56,3
3,528
M 68
3,9210
M 89,5
5,1513
M 1011,56,43
17
M 12148,319
M 1416
9,6822
M 1618
11,2824
M 2022
13,5230
blankDIN 982
künftig ISO / EN
A2
Ecrous de sécurité hexagonaux, avec frein en polya
-
Abmessung VPE Preis €
4 200 30,005 200 36,606 200 37,458 200 60,7510 100 107,4512 50 149,7516 50 278,0020 25 478,00
Preise per 100 Stück
04 / 2019 Seite 195
Sechskantmuttern selbstsichernd niedrige Form
Self-locking hexagon nuts, regular type
dh max.m1s
M 8 x 186
13
M 10 x 1107
17
M 12 x 1,5129
19
M 14 x 1,5141022
M 16 x 1,5161124
M 18 x 1,518,5
1427
M 20 x 1,5201530
M 22 x 1,5221632
M 24 x 1,5241636
M 24 x 2241636
M 30 x 1,5302346
M 30 x 2302346
verz. blauDIN 985
künftig ISO / EN i07042
8
Ecrous de sécurité hexagonaux, avec frein en polya
-
Abmessung VPE Preis €
3 1000 5,104 1000 5,355 1000 5,906 1000 6,058 1000 8,858 x 1 1000 15,0010 500 17,1010 x 1,25 500 22,0012 500 24,7012 x 1,5 500 33,4514 200 36,5514 x 1,5 200 49,0016 200 45,9516 x 1,5 200 59,3518 100 131,9518 x 1,5 100 171,1018 x 2 100 171,1020 100 144,9520 x 1,5 100 187,5520 x 2 100 187,5522 50 238,4022 x 1,5 50 310,5022 x 2 50 310,5024 50 253,5024 x 1,5 25 329,0024 x 2 50 329,0027 25 436,1527 x 2 25 471,2030 25 497,9530 x 2 25 605,1036 25 1095,4536 x 3 25 1097,50
Seite 196 04 / 2019
Preise per 100 Stück
Sechskantmuttern selbstsichernd niedrige Form
Self-locking hexagon nuts, regular type
dh max.m1s
M 34
2,75,5
M 45
3,27
M 55
3,58
M 66
4,510
M 886
13
M 10107
17
M 12129
19
M 14141022
M 16161124
M 1818,5
1427
M 20201530
M 22221632
M 24241636
M 27271941
M 30302346
blankDIN 985
künftig ISO / EN i07042
A2
Ecrous de sécurité hexagonaux, avec frein en polya
-
Abmessung VPE Preis €
2,5 500 19,653 500 10,854 500 11,405 500 12,106 500 13,108 500 18,6010 200 39,5012 200 55,3014 200 120,8516 100 157,5018 50 206,6020 50 263,4022 25 374,4024 25 428,6527 25 322,8030 25 939,90
Preise per 100 Stück
04 / 2019 Seite 197
Paßscheiben PS
Shim rings
d1 x d2 x s
blankDIN 988
künftig ISO / EN
Stahl
Rondelles d'ajustage
-
Abmessung VPE Preis €
3 x 6 x 0,1 5000 4,054 x 8 x 0,1 5000 3,804 x 8 x 0,2 5000 4,454 x 8 x 0,3 5000 4,454 x 8 x 0,5 5000 4,454 x 8 x 1 5000 5,455 x 10 x 0,1 5000 4,455 x 10 x 0,2 2500 4,055 x 10 x 0,3 2500 4,805 x 10 x 0,5 2500 4,805 x 10 x 1 2500 5,906 x 12 x 0,1 5000 4,056 x 12 x 0,2 2500 4,256 x 12 x 0,5 2500 4,906 x 12 x 1 2000 6,106 x 12 x 1,2 1000 7,307 x 13 x 0,1 2000 5,007 x 13 x 0,2 2000 5,257 x 13 x 1 1000 7,757 x 13 x 1,2 1000 7,758 x 14 x 0,1 5000 4,358 x 14 x 0,2 2000 4,708 x 14 x 0,3 2000 4,908 x 14 x 0,5 2000 5,008 x 14 x 1 1000 6,309 x 15 x 1 1000 6,6510 x 16 x 0,1 5000 4,8010 x 16 x 0,2 2000 5,1010 x 16 x 0,3 2000 5,3510 x 16 x 0,5 2000 5,8010 x 16 x 1 1000 7,0010 x 16 x 1,2 1000 9,1511 x 17 x 1,2 1000 9,5012 x 18 x 0,1 5000 5,1012 x 18 x 0,15 1000 7,9512 x 18 x 0,2 2000 5,3512 x 18 x 0,3 2000 5,6512 x 18 x 0,5 1000 6,0012 x 18 x 1 1000 8,0512 x 18 x 1,2 1000 9,7013 x 19 x 0,1 5000 5,65
Abmessung VPE Preis €
13 x 19 x 0,2 2000 8,6013 x 19 x 0,3 2000 7,1013 x 19 x 0,5 1000 8,0513 x 19 x 1 1000 9,0513 x 19 x 1,5 500 17,1014 x 20 x 0,1 2000 6,0014 x 20 x 0,3 2000 15,2514 x 20 x 0,5 1000 6,7514 x 20 x 1 1000 9,3514 x 20 x 1,5 1000 15,9015 x 21 x 0,1 2000 6,2015 x 21 x 0,2 2000 6,8515 x 21 x 0,3 2000 6,8515 x 21 x 0,5 1000 7,2015 x 21 x 1 1000 10,0515 x 21 x 1,5 1000 17,0015 x 22 x 0,3 2000 7,7515 x 22 x 0,5 1000 7,3016 x 22 x 0,1 2000 6,5516 x 22 x 0,2 2000 7,1016 x 22 x 0,3 2000 7,6516 x 22 x 0,5 1000 7,4016 x 22 x 1 1000 10,2516 x 22 x 1,5 1000 15,9017 x 24 x 0,1 2000 6,7517 x 24 x 0,2 2000 6,5517 x 24 x 0,3 1000 7,2017 x 24 x 0,5 1000 8,2017 x 24 x 1 1000 11,7517 x 24 x 1,5 1000 16,8018 x 25 x 0,1 2000 7,0018 x 25 x 0,2 2000 7,5018 x 25 x 0,3 1000 8,4018 x 25 x 0,5 1000 9,3518 x 25 x 1 1000 12,1018 x 25 x 1,5 500 18,8520 x 28 x 0,1 2000 7,6520 x 28 x 0,2 1000 7,0020 x 28 x 0,3 1000 7,5020 x 28 x 0,5 1000 8,9520 x 28 x 1 500 12,10
Abmessung VPE Preis €
20 x 28 x 1,5 500 16,3520 x 28 x 2 500 38,5022 x 30 x 0,1 2000 9,6022 x 30 x 0,2 1000 10,3522 x 30 x 0,3 1000 11,1022 x 30 x 0,5 1000 11,9022 x 30 x 1 500 18,1022 x 30 x 1,5 500 32,1522 x 32 x 0,5 1000 11,0022 x 32 x 1 500 16,8022 x 32 x 2 250 52,1025 x 35 x 0,1 2000 7,7525 x 35 x 0,2 1000 9,1525 x 35 x 0,3 1000 10,0525 x 35 x 0,5 1000 11,4525 x 35 x 1 500 17,0025 x 35 x 1,5 500 32,3525 x 35 x 2 250 48,6025 x 36 x 1 500 22,2526 x 37 x 0,5 500 13,7526 x 37 x 1 500 19,3026 x 37 x 2 250 60,8028 x 40 x 0,5 500 14,1528 x 40 x 1 500 22,9028 x 40 x 2 100 70,9530 x 42 x 0,1 1000 9,6030 x 42 x 0,2 1000 11,6530 x 42 x 0,3 500 12,6530 x 42 x 0,5 500 15,7030 x 42 x 1 500 21,9030 x 42 x 1,5 500 46,3530 x 42 x 2 200 66,9530 x 42 x 2,5 50 96,2532 x 45 x 0,1 1000 10,2532 x 45 x 0,5 1000 19,1032 x 45 x 1 250 26,0532 x 45 x 1,2 250 38,8032 x 45 x 2,5 50 106,4035 x 45 x 0,1 1000 10,0535 x 45 x 0,2 1000 12,6535 x 45 x 0,3 1000 12,95
Seite 198 04 / 2019
Preise per 100 Stück
Paßscheiben PS
Shim rings
d1 x d2 x s
blankDIN 988
künftig ISO / EN
Stahl
Rondelles d'ajustage
-
Abmessung VPE Preis €
35 x 45 x 0,5 500 16,8035 x 45 x 1 250 23,8535 x 45 x 1,5 50 106,4037 x 47 x 2,5 50 88,9540 x 50 x 0,1 500 14,0540 x 50 x 0,2 100 17,1040 x 50 x 0,3 250 17,2040 x 50 x 0,5 100 21,8040 x 50 x 1 100 29,6540 x 50 x 2 100 96,8040 x 50 x 2,5 50 121,5542 x 52 x 0,1 500 14,7042 x 52 x 0,3 250 16,8042 x 52 x 0,5 100 21,8042 x 52 x 1,0 100 32,9045 x 55 x 0,1 500 14,7045 x 55 x 0,5 100 23,8045 x 55 x 1 100 33,8045 x 55 x 3 50 157,0548 x 60 x 0,5 100 29,7548 x 60 x 3 50 192,5050 x 62 x 0,1 500 15,7050 x 62 x 0,15 500 20,2550 x 62 x 0,2 500 24,3050 x 62 x 0,3 250 20,1550 x 62 x 0,5 100 27,2550 x 62 x 1 100 41,3050 x 62 x 2 100 137,1050 x 62 x 3 50 192,5052 x 65 x 0,5 100 50,6052 x 65 x 3 50 222,9055 x 68 x 0,1 500 20,8055 x 68 x 0,3 250 31,4055 x 68 x 0,5 100 40,4555 x 68 x 1 100 53,2055 x 68 x 2 100 116,0055 x 68 x 3 50 222,9056 x 72 x 0,1 500 24,4056 x 72 x 1 100 61,7056 x 72 x 3 50 253,3060 x 75 x 0,1 500 26,60
Abmessung VPE Preis €
60 x 75 x 0,2 500 38,7060 x 75 x 0,5 100 46,5560 x 75 x 1 100 75,2060 x 75 x 3 50 273,6063 x 80 x 0,1 500 27,6063 x 80 x 0,5 100 48,9563 x 80 x 1 100 74,5563 x 80 x 3 50 334,3070 x 90 x 3,5 50 496,5075 x 95 x 3,5 50 537,0580 x 100 x 3,5 50 537,0585 x 105 x 0,1 500 40,5585 x 105 x 0,2 500 55,9085 x 105 x 0,3 250 60,8085 x 105 x 3,5 50 648,45100 x 120 x 3,5 50 759,85105 x 130 x 3,5 50 1259,95120 x 150 x 0,1 250 145,40120 x 150 x 0,3 250 218,20120 x 150 x 1 100 348,70
Preise per 100 Stück
04 / 2019 Seite 199
Scheiben für Holzverbinder
Washers
d 1d 2S
14586
18686
23808
25928
27105
8
verz. blauDIN 1052
künftig ISO / EN
HV100
Rondelles
-
Abmessung VPE Preis €
d 14 50 83,20d 18 25 112,45d 23 25 217,35d 25 25 412,40d 27 25 507,50
Seite 200 04 / 2019
Preise per 100 Stück
Scheiben Ausführung mittel für Bolzen
Washers for clevis pins
d1d2s
36
0,8
48
0,8
5100,8
6121,6
7141,6
8162
10202,5
12253
13253
14283
16283
18304
20324
22344
23364
blankDIN 1440
künftig ISO / EN i08738
HV100
Rondelles plates pour tourillons
-
Abmessung VPE Preis €
d 3 1000 2,00d 4 1000 2,00d 5 1000 2,35d 6 1000 3,50d 8 1000 6,45d 10 1000 8,30d 12 500 12,15d 16 500 14,75d 18 500 21,90d 20 200 25,80d 22 200 29,70d 25 200 38,40d 26 100 83,90d 28 100 93,35d 30 100 108,00
Preise per 100 Stück
04 / 2019 Seite 201
Scheiben Ausführung mittel für Bolzen
Washers for clevis pins
d1d2s
36
0,8
48
0,8
5100,8
6121,6
7141,6
8162
10202,5
12253
13253
14283
16283
18304
20324
22344
23364
verz. blauDIN 1440
künftig ISO / EN i08738
HV100
Rondelles plates pour tourillons
-
Abmessung VPE Preis €
d 4 1000 2,75d 5 1000 3,05d 6 1000 4,60d 8 1000 8,50d 10 1000 11,00d 12 500 16,25d 13 500 16,25d 14 500 19,65d 16 500 19,65d 20 200 34,40d 22 200 39,55d 25 200 51,25d 35 100 238,00d 40 50 276,90
Seite 202 04 / 2019
Preise per 100 Stück
Scheiben Ausführung grob für Bolzen
Washers for clevis pins, mg
d1d2s
5,5100,8
7121,6
9162
11202,5
13253
15283
17283
19304
21324
23344
26404
29425
31455
blankDIN 1441
künftig ISO / EN
HV100
Rondelles
-
Abmessung VPE Preis €
d 9 200 3,90d 11 200 6,05d 15 200 11,70d 17 200 12,85d 21 200 20,75d 25 200 37,00
Preise per 100 Stück
04 / 2019 Seite 203
Scheiben Ausführung grob für Bolzen
Washers for clevis pins, mg
d1d2s
5,5100,8
7121,6
9162
11202,5
13253
15283
17283
19304
21324
23344
26404
29425
31455
verz. blauDIN 1441
künftig ISO / EN
HV100
Rondelles
-
Abmessung VPE Preis €
d 9 200 5,10d 11 200 8,05d 13 200 12,10d 17 200 17,10d 21 200 27,70d 25 200 49,30d 31 100 75,65
Seite 204 04 / 2019
Preise per 100 Stück
Hutmuttern hohe Form
Hexagon domed cap nuts
dhsdkt min.
M 365
5,5-
M 487
6,55,26
M 5108
7,57,21
M 612109,5
7,71
M 81513
12,510,65
M 10181716
12,65
M 12221918
15,65
M 14252221
17,65
M 16282423
20,58
M 20343028
25,58
M 24423634
30,5
verz. blauDIN 1587
künftig ISO / EN
Stahl
Ecrous borgnes à calotte
-
Abmessung VPE Preis €
3 100 10,054 100 10,055 100 12,106 100 16,558 100 29,0010 100 56,1012 50 86,8514 50 135,5016 50 160,9020 25 308,6524 25 568,15
Preise per 100 Stück
04 / 2019 Seite 205
Hutmuttern hohe Form
Hexagon domed cap nuts
d1hsdkt max.
M 365
5,5-
M 487
6,55,26
M 5108
7,57,21
M 612109,5
7,71
M 81513
12,510,65
M 10181716
12,65
M 12221918
15,65
M 14252221
17,65
M 16282423
20,58
M 20343028
25,58
M 24423634
30,5
blankDIN 1587
künftig ISO / EN
A2
Ecrous borgnes à calotte
-
Abmessung VPE Preis €
3 500 14,504 500 13,005 500 12,506 500 14,658 200 24,0010 100 50,0012 100 66,0014 50 247,5016 50 174,2518 25 675,0020 25 560,0022 10 1440,0024 10 1400,0027 10 2800,0030 10 3700,00
Seite 206 04 / 2019
Preise per 100 Stück
Nutmuttern metrisches Feingewinde
Slotted round nuts for hook spanners
d1 metrischd2bh
102556
122856
143057
163257
183468
203668
224069
244269
26457
10
28507
10
30507
10
32527
11
35557
11
38588
11
40628
10
blankDIN 1804
künftig ISO / EN
5.8
Ecrous à encoches
-
Abmessung VPE Preis €
8 x 1 10 660,3210 x 1 10 708,0012 x 1,5 10 735,2414 x 1,5 10 816,8816 x 1,5 10 844,1218 x 1,5 10 885,0020 x 1,5 10 925,8022 x 1,5 10 993,9224 x 1,5 10 480,0026 x 1,5 10 1252,6028 x 1,5 10 1429,6030 x 1,5 10 1429,6032 x 1,5 1 1661,0435 x 1,5 1 1769,9238 x 1,5 1 1906,0840 x 1,5 1 2123,9242 x 1,5 1 2123,9245 x 1,5 1 2355,4048 x 1,5 1 2872,7650 x 1,5 1 2872,7652 x 1,5 1 3308,4455 x 1,5 1 3308,4458 x 1,5 1 4561,0060 x 1,5 1 4561,0062 x 1,5 1 5173,6865 x 1,5 1 5173,6868 x 1,5 1 5241,7670 x 1,5 1 5309,8072 x 1,5 1 6194,8075 x 1,5 1 6194,8080 x 2 1 7079,76
Preise per 100 Stück
04 / 2019 Seite 207
Kreuzlochmuttern metrisches Feingewinde
Round nuts with set pin holes inside
d1 metrischd2d3d4h
102520
M 36
122823
M 36
143025
M 47
163227
M 47
183428
M 47
203630
M 48
224034
M 49
244236
M 49
264538
M 510
285043
M 510
305043
M 510
325245
M 511
355548
M 511
385850
M 511
406254
M 512
blankDIN 1816
künftig ISO / EN
5.8
Ecrous cylindriques percés en croix
-
Abmessung VPE Preis €
8 x 1 1 428,4010 x 1 1 451,5012 x 1,5 10 735,2414 x 1,5 1 537,3016 x 1,5 10 844,1218 x 1,5 10 885,0020 x 1,5 10 925,8022 x 1,5 10 993,9224 x 1,5 10 1061,9626 x 1,5 10 1252,6028 x 1,5 10 1429,6030 x 1,5 10 1429,6032 x 1,5 1 1176,5035 x 1,5 1 1769,9238 x 1,5 1 1335,8040 x 1,5 1 2123,9242 x 1,5 1 2123,9245 x 1,5 1 2355,4048 x 1,5 1 2872,7650 x 1,5 1 2872,7652 x 1,5 1 2430,6055 x 1,5 1 3308,4458 x 1,5 1 3259,5060 x 1,5 1 4561,0062 x 1,5 1 3644,8065 x 1,5 1 3644,8068 x 1,5 1 3828,1570 x 1,5 1 5309,8072 x 1,5 1 4416,7575 x 1,5 1 6194,80
Seite 208 04 / 2019
Preise per 100 Stück
Tellerfedern
Disc springs
d2 x d1 x s
brüniertDIN 2093
künftig ISO / EN
Stahl
Rondelles-Ressort
-
Abmessung VPE Preis €
6 x 3,2 x 0,3 200 14,758 x 3,2 x 0,2 200 14,558 x 4,2 x 0,3 200 15,008 x 4,2 x 0,4 200 15,3510 x 4,2 x 0,5 200 16,5512 x 4,2 x 0,6 200 18,2510 x 5,2 x 0,25 200 15,9010 x 5,2 x 0,4 200 16,4510 x 5,2 x 0,5 200 16,5512,5 x 5,2 x 0,5 200 18,0515 x 5,2 x 0,5 200 19,2015 x 5,2 x 0,7 200 19,2512,0 x 6,2 x 0,5 200 18,0512,5 x 6,2 x 0,35 200 17,7012,5 x 6,2 x 0,5 200 18,0512,5 x 6,2 x 0,7 200 18,8015 x 6,2 x 0,5 200 19,2015 x 6,2 x 0,6 200 19,2018 x 6,2 x 0,4 200 17,4514 x 7,2 x 0,5 200 18,7014 x 7,2 x 0,8 200 20,2515 x 8,2 x 0,7 200 20,0015 x 8,2 x 0,8 200 20,6516 x 8,2 x 0,4 200 19,2016 x 8,2 x 0,6 200 20,1516 x 8,2 x 0,7 200 20,4016 x 8,2 x 0,8 200 21,2016 x 8,2 x 0,9 200 21,8518 x 8,2 x 0,8 200 21,8518 x 8,2 x 1 200 24,0520 x 8,2 x 0,6 200 22,0020 x 8,2 x 0,8 200 23,1020 x 8,2 x 1,0 200 25,7023 x 8,2 x 0,9 200 25,7023 x 8,2 x 1 200 30,3518 x 9,2 x 0,7 200 21,1018 x 9,2 x 1,0 200 24,0520 x 10,2 x 0,5 200 21,6520 x 10,2 x 0,8 200 23,1020 x 10,2 x 0,9 200 23,3520 x 10,2 x 1,00 200 25,70
Abmessung VPE Preis €
20 x 10,2 x 1,1 200 26,9020 x 10,2 x 1,25 200 37,9020 x 10,2 x 1,5 200 39,0023 x 10,2 x 1 200 30,3525 x 10,2 x 1,0 200 32,3528 x 10,2 x 1,25 200 47,6528 x 10,2 x 1,5 200 50,7022,5 x 11,2 x 0,6 200 22,5522,5 x 11,2 x 0,8 200 24,8022,5 x 11,2 x 1,2 200 28,9523 x 12,2 x 1 200 30,3523 x 12,2 x 1,25 200 40,9525 x 12,2 x 0,7 200 25,7025 x 12,2 x 0,9 200 27,9525 x 12,2 x 1,0 200 32,3525 x 12,2 x 1,25 200 44,5525 x 12,2 x 1,5 200 46,6028 x 12,2 x 1 200 47,6528 x 12,2 x 1,2 200 47,6528 x 12,2 x 1,5 200 50,7031,5 x 12,2 x 1 100 34,7534 x 12,3 x 1,5 100 64,5528 x 14,2 x 0,8 200 32,0028 x 14,2 x 1 200 33,5528 x 14,2 x 1,25 200 47,6528 x 14,2 x 1,5 200 50,7031,5 x 16,3 x 0,8 100 35,7531,5 x 16,3 x 1,2 100 52,6031,5 x 16,3 x 1,5 100 56,2031,5 x 16,3 x 1,7 100 60,6531,5 x 16,3 x 2,0 100 67,4540 x 16,3 x 2,0 100 92,7535,5 x 18,3 x 2,0 100 75,3040 x 18,3 x 2,0 100 92,7540 x 20,4 x 1 100 60,2040 x 20,4 x 1,5 100 86,4540 x 20,4 x 2 100 92,7540 x 20,4 x 2,25 100 102,9040 x 20,4 x 2,5 100 111,6045 x 22,4 x 1,25 100 108,3545 x 22,4 x 1,75 100 119,80
Abmessung VPE Preis €
45 x 22,4 x 2,5 100 132,5050 x 25,4 x 1,25 100 115,0050 x 25,4 x 2 100 143,0550 x 25,4 x 3 100 193,7060 x 30,5 x 3 100 261,2570 x 30,5 x 3 100 366,1563 x 31 x 1,8 100 216,4563 x 31 x 2,5 100 237,2063 x 31 x 3 100 265,2563 x 31 x 3,5 100 312,4571 x 36 x 2,0 100 297,0571 x 36 x 4,0 100 532,0590 x 46 x 3,5 1 621,05100 x 51 x 2,7 1 768,45100 x 51 x 3,5 1 751,05100 x 51 x 4,0 1 1085,65100 x 51 x 5,0 1 1360,30112 x 57 x 3 1 1045,25112 x 57 x 4 1 1110,40125 x 64 x 3,5 1 1247,10125 x 64 x 5 1 1652,60140 x 72 x 3,8 1 1851,05
Preise per 100 Stück
04 / 2019 Seite 209
Schlauchschellen Breite 9 mm
verz. blauDIN 3017
künftig ISO / EN
Stahl-
Abmessung VPE Preis €
8 x 12 50 69,9010 x 16 50 71,20110 x 130 25 206,2012 x 22 50 74,10130 x 150 25 220,6016 x 27 50 76,8020 x 32 50 78,2025 x 40 50 86,4030 x 45 25 89,4040 x 60 25 94,6050 x 70 25 96,0060 x 80 25 105,7070 x 90 25 125,0080 x 100 25 127,6090 x 110 25 130,50
Seite 210 04 / 2019
Preise per 100 Stück
Schlauchschellen Breite 9 mm
verz. blauDIN 3017
künftig ISO / EN
A2-
Abmessung VPE Preis €
8 x 12-7,5 100 97,708 x 12 50 99,2010 x 16 50 99,20120 x 140 25 261,6012 x 22 50 102,4016 x 25 50 106,6020 x 32 50 112,7025 x 40-12 50 132,7025 x 40 50 120,0032 x 50 25 122,9040 x 60 25 129,1050 x 70 25 131,9060 x 80 25 138,0070 x 90-12 25 194,7070 x 90 25 163,1080 x 100 25 167,7090 x 110 25 176,60
Preise per 100 Stück
04 / 2019 Seite 211
Zylinderstifte gehärtet, Toleranzfeld m6
Parallel pins, hardened
di2z1z2
20,60,3
0,18
2,50,70,4
0,25
30,8
0,450,3
41
0,60,4
51,2
0,750,5
61,50,90,6
81,81,20,8
102
1,51
122,51,81,3
163
2,51,7
blankDIN 6325
künftig ISO / EN i08734
gehärtet
Goupilles cylindriques, trempées
-
Abmessung VPE Preis €
1 m6 x 4 200 14,701 m6 x 5 200 14,701 m6 x 6 200 14,701 m6 x 8 200 16,351 m6 x 10 200 17,451 m6 x 12 200 18,001,5 m6 x 5 200 11,451,5 m6 x 6 200 10,901,5 m6 x 8 200 12,001,5 m6 x 10 200 12,551,5 m6 x 12 200 13,101,5 m6 x 14 200 14,701,5 m6 x 16 200 15,801,5 m6 x 18 200 18,001,5 m6 x 20 200 26,152 m6 x 5 200 16,002 m6 x 6 200 12,002 m6 x 8 200 13,302 m6 x 10 200 13,752 m6 x 12 200 14,802 m6 x 14 200 14,952 m6 x 16 200 16,352 m6 x 18 200 16,702 m6 x 20 200 17,452 m6 x 28 200 23,102 m6 x 30 200 23,602,5 m6 x 6 200 13,102,5 m6 x 8 200 13,302,5 m6 x 10 200 14,402,5 m6 x 12 200 15,352,5 m6 x 14 200 14,952,5 m6 x 16 200 16,252,5 m6 x 18 200 17,552,5 m6 x 20 200 17,552,5 m6 x 22 200 18,102,5 m6 x 24 200 18,652,5 m6 x 26 200 23,103 m6 x 5 200 12,003 m6 x 6 200 11,553 m6 x 8 200 11,553 m6 x 10 200 12,45
Abmessung VPE Preis €
3 m6 x 12 200 13,203 m6 x 14 200 13,503 m6 x 16 200 13,853 m6 x 18 200 14,703 m6 x 20 200 15,253 m6 x 22 200 15,803 m6 x 24 200 16,703 m6 x 26 200 18,103 m6 x 28 200 19,103 m6 x 30 200 19,603 m6 x 32 200 21,603 m6 x 36 200 30,303 m6 x 40 200 37,303 m6 x 45 200 41,403 m6 x 50 200 50,154 m6 x 6 100 13,104 m6 x 8 100 14,954 m6 x 10 100 15,254 m6 x 12 100 15,904 m6 x 14 100 16,154 m6 x 16 100 17,754 m6 x 18 100 18,554 m6 x 20 100 18,754 m6 x 22 100 20,704 m6 x 24 100 21,454 m6 x 26 100 22,804 m6 x 28 100 23,854 m6 x 30 100 25,404 m6 x 32 100 25,604 m6 x 36 100 27,254 m6 x 40 100 29,554 m6 x 45 100 38,604 m6 x 50 100 41,004 m6 x 60 100 68,804 m6 x 80 100 135,805 m6 x 8 100 17,005 m6 x 10 100 18,855 m6 x 12 100 18,755 m6 x 14 100 19,105 m6 x 16 100 22,255 m6 x 18 100 22,45
Abmessung VPE Preis €
5 m6 x 20 100 23,455 m6 x 22 100 24,655 m6 x 24 100 26,155 m6 x 26 100 29,455 m6 x 28 100 29,455 m6 x 30 100 30,755 m6 x 32 100 32,505 m6 x 36 100 34,755 m6 x 40 100 38,055 m6 x 45 100 45,805 m6 x 50 100 49,405 m6 x 60 100 64,755 m6 x 70 100 108,006 m6 x 8 100 24,306 m6 x 10 100 24,006 m6 x 12 100 25,606 m6 x 14 100 26,406 m6 x 16 100 28,006 m6 x 18 100 28,656 m6 x 20 100 29,756 m6 x 22 100 33,556 m6 x 24 100 33,056 m6 x 26 100 38,156 m6 x 28 100 35,956 m6 x 30 100 37,306 m6 x 32 100 38,606 m6 x 36 100 41,756 m6 x 40 100 46,856 m6 x 45 100 56,256 m6 x 50 100 58,556 m6 x 55 100 65,406 m6 x 60 100 67,606 m6 x 70 100 103,356 m6 x 80 100 105,856 m6 x 90 100 177,656 m6 x 100 100 185,308 m6 x 12 100 60,008 m6 x 14 100 58,508 m6 x 16 100 39,508 m6 x 18 100 44,258 m6 x 20 100 45,80
Seite 212 04 / 2019
Preise per 100 Stück
Zylinderstifte gehärtet, Toleranzfeld m6
Parallel pins, hardened
di2z1z2
20,60,3
0,18
2,50,70,4
0,25
30,8
0,450,3
41
0,60,4
51,2
0,750,5
61,50,90,6
81,81,20,8
102
1,51
122,51,81,3
163
2,51,7
blankDIN 6325
künftig ISO / EN i08734
gehärtet
Goupilles cylindriques, trempées
-
Abmessung VPE Preis €
8 m6 x 22 100 51,258 m6 x 24 100 50,258 m6 x 26 100 55,258 m6 x 28 100 55,158 m6 x 30 100 57,558 m6 x 32 100 60,608 m6 x 36 100 65,608 m6 x 40 100 73,058 m6 x 45 100 82,108 m6 x 50 100 86,658 m6 x 55 100 97,008 m6 x 60 100 101,358 m6 x 70 100 118,808 m6 x 80 100 134,058 m6 x 90 100 187,508 m6 x 100 100 230,108 m6 x 120 100 415,0010 m6 x 20 100 68,1510 m6 x 22 100 71,9510 m6 x 24 100 74,3510 m6 x 26 100 77,0510 m6 x 28 100 80,4510 m6 x 30 100 83,5010 m6 x 32 100 86,0010 m6 x 36 100 92,6510 m6 x 40 100 101,7010 m6 x 45 100 114,2510 m6 x 50 100 119,9010 m6 x 55 100 137,5510 m6 x 60 100 146,7010 m6 x 70 100 177,6510 m6 x 80 100 201,6510 m6 x 90 100 246,3510 m6 x 100 100 282,4010 m6 x 120 100 355,3512 m6 x 20 100 105,5012 m6 x 24 50 105,5012 m6 x 26 50 134,6012 m6 x 28 50 111,7512 m6 x 30 50 116,1012 m6 x 32 50 122,10
Abmessung VPE Preis €
12 m6 x 36 50 131,1512 m6 x 40 50 140,4012 m6 x 45 50 151,9512 m6 x 50 50 161,7512 m6 x 55 50 179,5012 m6 x 60 50 186,0512 m6 x 70 50 210,1512 m6 x 80 50 234,4512 m6 x 90 50 311,7512 m6 x 100 50 352,6014 m6 x 36 50 256,1514 m6 x 40 50 268,1514 m6 x 50 50 317,2014 m6 x 60 50 347,7014 m6 x 70 50 388,0514 m6 x 80 50 414,7514 m6 x 100 50 526,2514 m6 x 120 50 655,9516 m6 x 36 50 305,7516 m6 x 40 50 324,8016 m6 x 45 50 347,7016 m6 x 50 50 373,8516 m6 x 55 50 391,8516 m6 x 60 50 415,3016 m6 x 70 50 463,2516 m6 x 80 50 509,0516 m6 x 90 50 559,1516 m6 x 100 50 612,6016 m6 x 120 50 719,4020 m6 x 40 25 570,8520 m6 x 45 25 602,6520 m6 x 50 25 628,6020 m6 x 55 25 683,2020 m6 x 60 25 697,7020 m6 x 70 25 766,2520 m6 x 80 25 843,6520 m6 x 90 25 945,7020 m6 x 100 25 1009,1020 m6 x 120 25 1164,65
Preise per 100 Stück
04 / 2019 Seite 213
Sechskantmuttern 1,5 d hoch Ausführung B
Thick hexagon nuts
Gewinded1msr
M 89
121311
M 1011,5
151615
M 1214181817
M 1618242422
M 2022303027
M 2426363632
M 3032454641
M 3638545550
brüniertDIN 6330
künftig ISO / EN
10.9
Ecrous à six pans, forme haute
-
Abmessung VPE Preis €
BM 8 200 24,88BM 10 200 46,00BM 12 200 61,85BM 16 200 158,00BM 20 200 200,00BM 24 200 325,00
Seite 214 04 / 2019
Preise per 100 Stück
Sechskantmuttern 1,5 d hoch Ausführung B
Thick hexagon nuts
Gewinded1msr
M 89
121311
M 1011,5
151615
M 1214181817
M 1618242422
M 2022303027
M 2426363632
M 3032454641
M 3638545550
blankDIN 6330
künftig ISO / EN
5.8
Ecrous à six pans, forme haute
-
Abmessung VPE Preis €
BM 8 200 44,75BM 10 200 56,30BM 12 200 76,50BM 14 200 121,90BM 16 200 158,00BM 20 100 282,70BM 24 50 440,70
Preise per 100 Stück
04 / 2019 Seite 215
Sechskantmuttern 1,5 d hoch mit Bund
Thick hexagon nuts 1,5 d with collar
Gewinded1msa
M 81812133,5
M 102215164
M 122518184
M 163124245
M 203730306
M 244536366
M 305845468
M 3668545510
brüniertDIN 6331
künftig ISO / EN
10.9
Ecrous à six pans à embase, forme haute
-
Abmessung VPE Preis €
6 100 9,508 100 18,5510 100 36,7512 100 48,9514 50 170,9016 50 93,9518 50 490,5020 50 230,6524 25 431,4030 25 1318,4536 25 5420,90
Seite 216 04 / 2019
Preise per 100 Stück
Sechskantmuttern 1,5 d hoch mit Bund
Thick hexagon nuts 1,5 d with collar
Gewinded1msa
M 81812133,5
M 102215164
M 122518184
M 163124245
M 203730306
M 244536366
M 305845468
M 3668545510
verz. blauDIN 6331
künftig ISO / EN
10.9
Ecrous à six pans à embase, forme haute
-
Abmessung VPE Preis €
6 100 15,058 100 26,4010 100 51,5512 100 57,4516 50 150,7520 50 302,7024 25 643,10
Preise per 100 Stück
04 / 2019 Seite 217
Sechskantmuttern 3 d hoch
Extensions nuts
Gewindemse
M 8241315
M 103017
19,6
M 123619
21,9
M 164824
27,7
M 206030
34,6
M 247236
41,6
M 309046
53,1
M 3610855
63,5
verz. blauDIN 6334
künftig ISO / EN
Stahl
Ecrous six pans de rallonge
-
Abmessung VPE Preis €
6 500 38,358 200 57,0010 100 112,7512 50 130,9016 25 237,2520 20 567,20
Seite 218 04 / 2019
Preise per 100 Stück
Scheiben, gehärtet
Plain washers hardened
d1d2s
6,4173
8,4234
10,5284
13355
17456
21506
25608
316810
brüniertDIN 6340
künftig ISO / EN
gehärtet
Rondelles pour princes de serrage
-
Abmessung VPE Preis €
d 6,3 500 8,70d 8,4 500 16,35d 10,5 100 25,20d 13 100 53,30d 15 50 99,85d 17 50 102,25d 19 50 183,25d 21 25 125,00d 23 25 137,35d 25 25 252,25d 31 25 572,25
Preise per 100 Stück
04 / 2019 Seite 219
Scheiben, gehärtet
Plain washers hardened
d1d2s
6,4173
8,4234
10,5284
13355
17456
21506
25608
316810
verz. blauDIN 6340
künftig ISO / EN
gehärtet
Rondelles pour princes de serrage
-
Abmessung VPE Preis €
d 6,3 500 12,75d 8,4 500 21,15d 10,5 100 27,80d 13 100 60,95d 15 50 113,70d 17 50 125,00d 19 50 104,20d 21 25 149,55d 25 25 395,65
Seite 220 04 / 2019
Preise per 100 Stück
Spannscheiben für Schraubverbindungen
Conical spring washers for screwed connections
Nenngrößed1d2h max. min.s
33,2
70,85/0,72
0,6
44,3
91,3/1,12
1
55,311
1,55/1,351,2
66,414
2/1,71,5
88,418
2,6/2,242
1010,5
233,2/2,8
2,5
121329
3,95/3,433
141535
4,65/4,043,5
161739
5,25/4,584
181942
5,8/5,084,5
202145
6,4/5,65
242556
7,75/6,776
303170
9,2/87
brüniertDIN 6796
künftig ISO / EN
Stahl
Rondelles élastiques
-
Abmessung VPE Preis €
d 3 1000 4,15d 4 1000 4,15d 5 1000 4,95d 6 1000 5,50d 8 1000 9,65d 1 1000 16,90d 12 500 31,00d 16 250 60,45d 18 100 98,20d 20 100 121,95
Preise per 100 Stück
04 / 2019 Seite 221
Spannscheiben für Schraubverbindungen
Conical spring washers for screwed connections
Nenngrößed1d2h max. min.s
33,2
70,85/0,72
0,6
44,3
91,3/1,12
1
55,311
1,55/1,351,2
66,414
2/1,71,5
88,418
2,6/2,242
1010,5
233,2/2,8
2,5
121329
3,95/3,433
141535
4,65/4,043,5
161739
5,25/4,584
181942
5,8/5,084,5
202145
6,4/5,65
242556
7,75/6,776
303170
9,2/87
verz. blauDIN 6796
künftig ISO / EN
Stahl
Rondelles élastiques
-
Abmessung VPE Preis €
d 3 1000 4,50d 4 1000 4,80d 5 1000 4,50d 6 1000 8,75d 8 1000 10,80d 10 1000 19,75d 12 500 40,35d 16 250 74,05d 18 100 120,00d 20 100 143,90
Seite 222 04 / 2019
Preise per 100 Stück
Zahnscheiben außenverzahnt
Toothed lock washers
d1d2d3
3,26
4,38
5,310
6,411
8,415
10,518
1320,5
1524
1726
1930
2133
2336
2538
2844
3148
brüniertDIN 6797 A
künftig ISO / EN
Stahl
Rondelles élastiques plane à dents
-
Abmessung VPE Preis €
A 2,2 1000 1,40A 2,7 1000 1,40A 3,2 1000 1,40A 3,7 1000 1,55A 4,3 1000 1,55A 5,3 1000 1,85A 6,4 1000 2,25A 7,4 1000 3,20A 8,4 1000 3,70A 10,5 1000 5,60A 13 1000 7,80A 15 1000 12,30A 17 1000 16,45A 19 500 25,65A 21 500 32,95A 23 500 38,70A 25 500 44,00A 28 250 56,70A 31 250 66,50
Preise per 100 Stück
04 / 2019 Seite 223
Zahnscheiben außenverzahnt
Toothed lock washers
d1d2d3
3,26
4,38
5,310
6,411
8,415
10,518
1320,5
1524
1726
1930
2133
2336
2538
2844
3148
verz. blauDIN 6797 A
künftig ISO / EN
Stahl
Rondelles élastiques plane à dents
-
Abmessung VPE Preis €
A 2,2 1000 1,45A 2,7 1000 1,40A 3,2 1000 1,45A 3,7 1000 1,70A 4,3 1000 1,70A 5,3 1000 1,95A 6,4 1000 2,50A 7,4 1000 3,50A 8,4 1000 4,10A 10,5 1000 6,30A 13 1000 8,85A 15 1000 13,90A 17 1000 18,25A 19 500 28,45A 21 500 35,50A 23 500 43,15A 25 500 48,50A 28 250 62,85A 31 250 73,40
Seite 224 04 / 2019
Preise per 100 Stück
Zahnscheiben außenverzahnt
Toothed lock washers
d1d2
3,26
4,38
5,310
6,411
8,415
10,518
1320,5
1726
1930
2133
blankDIN 6797 A
künftig ISO / EN
A2
Rondelles élastiques plane à dents
-
Abmessung VPE Preis €
A 2,2 1000 2,30A 2,7 1000 2,30A 3,2 1000 1,35A 4,3 1000 1,35A 5,3 1000 1,75A 6,4 1000 2,10A 8,4 1000 3,65A 10,5 1000 5,65A 13 1000 7,55
Preise per 100 Stück
04 / 2019 Seite 225
Zahnscheiben innenverzahnt
Toothed lock washers
d1d2d3
3,26
4,38
5,310
6,411
8,415
10,518
1320,5
1524
1726
1930
2133
2336
2538
2844
3148
brüniertDIN 6797 I
künftig ISO / EN
Stahl
Rondelles élastiques plane à dents
-
Abmessung VPE Preis €
I 2,2 1000 1,40I 2,7 1000 1,40I 3,2 1000 1,40I 3,7 1000 1,55I 4,3 1000 1,55I 5,3 1000 1,85I 6,4 1000 2,25I 7,4 1000 3,20I 8,4 1000 3,80I 10,5 1000 5,60I 13 1000 7,80I 15 1000 12,30I 17 1000 16,45I 19 500 25,65I 21 500 32,95I 23 500 38,70I 25 500 44,00I 27 250 56,70I 28 250 56,70I 30 250 66,50I 31 250 66,50
Seite 226 04 / 2019
Preise per 100 Stück
Zahnscheiben innenverzahnt
Toothed lock washers
d1d2d3
3,26
4,38
5,310
6,411
8,415
10,518
1320,5
1524
1726
1930
2133
2336
2538
2844
3148
verz. blauDIN 6797 I
künftig ISO / EN
Stahl
Rondelles élastiques plane à dents
-
Abmessung VPE Preis €
I 2,2 1000 1,45I 2,7 1000 1,40I 3,2 1000 1,45I 3,7 1000 1,70I 4,3 1000 1,70I 5,3 1000 1,95I 6,4 1000 2,50I 7,4 1000 3,50I 8,4 1000 4,10I 10,5 1000 6,30I 13 1000 8,85I 15 1000 13,90I 17 1000 18,25I 19 500 28,45I 21 500 35,50I 23 500 43,15I 25 500 48,50I 28 250 62,85I 31 250 73,40
Preise per 100 Stück
04 / 2019 Seite 227
Zahnscheiben innenverzahnt
Toothed lock washers
d1d2
3,26
4,38
5,310
6,411
8,415
10,518
1320,5
1726
1930
2133
blankDIN 6797 I
künftig ISO / EN
A2
Rondelles élastiques plane à dents
-
Abmessung VPE Preis €
I 2,7 1000 2,30I 3,2 1000 0,95I 4,3 1000 1,35I 5,3 1000 1,75I 6,4 1000 2,10I 8,4 1000 3,65I 10,5 500 5,65I 13 500 7,65
Seite 228 04 / 2019
Preise per 100 Stück
Fächerscheiben Form A
Serrated lock washers
d1d2d3
3,26
4,38
5,310
6,411
8,415
10,518
1320,5
1524
1726
1930
2133
2336
2538
2844
3148
brüniertDIN 6798 A
künftig ISO / EN
Stahl
Rondelles eventails
-
Abmessung VPE Preis €
A 2,2 1000 1,35A 3,2 1000 1,35A 3,7 1000 1,45A 4,3 1000 1,45A 5,3 1000 1,80A 6,4 1000 2,20A 7,4 1000 3,15A 8,4 1000 3,70A 10,5 1000 5,50A 13 1000 7,75A 15 1000 12,20A 17 1000 16,25A 19 500 25,10A 21 500 31,90A 23 500 38,30A 25 500 43,15A 28 250 55,25A 31 250 65,00
Preise per 100 Stück
04 / 2019 Seite 229
Fächerscheiben Form A
Serrated lock washers
d1d2d3
3,26
4,38
5,310
6,411
8,415
10,518
1320,5
1524
1726
1930
2133
2336
2538
2844
3148
verz. blauDIN 6798 A
künftig ISO / EN
Stahl
Rondelles eventails
-
Abmessung VPE Preis €
A 2,2 1000 1,40A 2,7 1000 1,40A 3,2 1000 1,40A 3,7 1000 1,65A 4,3 1000 1,65A 5,3 1000 1,95A 6,4 1000 2,45A 7,4 1000 3,50A 8,4 1000 4,20A 10,5 1000 6,45A 13 1000 8,85A 15 1000 14,10A 17 1000 18,50A 19 500 28,70A 21 500 36,10A 23 500 43,15A 25 500 48,35A 28 250 63,00A 31 250 74,05
Seite 230 04 / 2019
Preise per 100 Stück
Fächerscheiben Form A
Serrated lock washers
d1d2
3,26
4,38
5,310
6,411
8,415
10,518
1320,5
1726
1930
2133
blankDIN 6798 A
künftig ISO / EN
A2
Rondelles eventails
-
Abmessung VPE Preis €
A 3,2 1000 1,50A 4,3 1000 1,70A 5,3 1000 2,35A 6,4 1000 2,80A 8,4 1000 4,15A 10,5 1000 6,55A 13 500 7,90
Preise per 100 Stück
04 / 2019 Seite 231
Fächerscheiben Form I
Serrated lock washers
d1d2d3
3,26
4,38
5,310
6,411
8,415
10,518
1320,5
1524
1726
1930
2133
2336
2538
2844
3148
brüniertDIN 6798 I
künftig ISO / EN
Stahl
Rondelles eventails
-
Abmessung VPE Preis €
I 2,2 1000 1,35I 2,7 1000 1,35I 3,2 1000 1,35I 3,7 1000 1,45I 4,3 1000 1,45I 5,3 1000 1,80I 6,4 1000 2,20I 7,4 1000 3,15I 8,4 1000 3,70I 10,5 1000 5,50I 13 1000 10,05I 15 1000 12,20I 17 1000 16,25I 19 500 25,10I 21 500 31,90I 23 500 38,30I 25 500 43,15I 28 250 55,25I 31 250 65,00
Seite 232 04 / 2019
Preise per 100 Stück
Fächerscheiben Form I
Serrated lock washers
d1d2d3
3,26
4,38
5,310
6,411
8,415
10,518
1320,5
1524
1726
1930
2133
2336
2538
2844
3148
verz. blauDIN 6798 I
künftig ISO / EN
Stahl
Rondelles eventails
-
Abmessung VPE Preis €
I 2,2 1000 1,40I 2,7 1000 1,40I 3,2 1000 1,40I 3,7 1000 1,65I 4,3 1000 1,65I 5,3 1000 1,95I 6,4 1000 2,45I 7,4 1000 3,50I 8,4 1000 4,20I 10,5 1000 6,45I 13 1000 8,85I 15 1000 14,10I 17 1000 18,50I 19 500 28,70I 21 500 36,10I 23 500 43,15I 25 500 48,35I 28 500 63,00I 31 250 74,05
Preise per 100 Stück
04 / 2019 Seite 233
Fächerscheiben Form I
Serrated lock washers
d1d2
3,26
4,38
5,310
6,411
8,415
10,518
1320,5
1726
1930
2133
blankDIN 6798 I
künftig ISO / EN
A2
Rondelles eventails
-
Abmessung VPE Preis €
I 3,2 1000 1,50I 4,3 1000 1,70I 5,3 1000 2,35I 6,4 1000 2,80I 8,4 1000 4,15I 10,5 1000 6,55
Seite 234 04 / 2019
Preise per 100 Stück
Sicherungsscheiben für Wellen
Retaining washers for shafts
Nut d2d3s
1,23,250,3
1,54,250,4
1,94,80,5
2,36,30,6
3,27,30,6
49,30,7
511,30,7
612,30,7
714,30,9
816,31,0
918,81,1
1020,41,2
1223,41,3
1529,41,5
1937,61,75
brüniertDIN 6799
künftig ISO / EN
Stahl
Rondelles de sécurité
-
Abmessung VPE Preis €
1,5 10000 1,001,9 10000 1,152,3 5000 1,203,2 5000 1,304 5000 1,705 2500 2,056 2500 2,407 2500 3,308 2000 4,609 1000 6,0510 1000 7,2012 1000 9,6015 500 21,7519 250 40,4024 250 54,25
Preise per 100 Stück
04 / 2019 Seite 235
Sicherungsscheiben für Wellen
Retaining washers for shafts
Nut d2d3s
1,23,250,3
1,54,250,4
1,94,80,5
2,36,30,6
3,27,30,6
49,30,7
511,30,7
612,30,7
714,30,9
816,31,0
918,81,1
1020,41,2
1223,41,3
1529,41,5
1937,61,75
verz. blauDIN 6799
künftig ISO / EN
Stahl
Rondelles de sécurité
-
Abmessung VPE Preis €
2,3 5000 1,653 5000 1,654 5000 2,405 2500 4,456 2500 2,957 2500 4,608 2000 6,3010 1000 9,9015 500 21,80
Seite 236 04 / 2019
Preise per 100 Stück
Sicherungsscheiben für Wellen
Retaining washers for shafts
Nut d2d3s
1,23,250,3
1,54,250,4
1,94,80,5
2,36,30,6
3,27,30,6
49,30,7
511,30,7
612,30,7
714,30,9
816,31,0
918,81,1
1020,41,2
1223,41,3
1529,41,5
1937,61,75
blankDIN 6799
künftig ISO / EN
A2
Rondelles de sécurité
-
Abmessung VPE Preis €
2,3 1000 8,753,2 1000 9,404 1000 13,455 1000 19,656 1000 20,407 500 28,708 500 39,2510 500 74,6512 200 85,2015 200 196,25
Preise per 100 Stück
04 / 2019 Seite 237
Paßfedern Form A
Parallel keys
Breite bHöhe h
33
44
55
66
87
108
128
149
1610
1811
2012
2214
2514
blankDIN 6885
künftig ISO / EN
Stahl
Clavettes parallèles fixées par vis
-
Abmessung VPE Preis €
A 2 x 2 x 6 200 10,20A 2 x 2 x 8 200 12,25A 2 x 2 x 10 200 12,70A 2 x 2 x 12 200 14,40A 2 x 2 x 14 200 18,40A 3 x 3 x 8 200 11,55A 3 x 3 x 10 200 13,50A 3 x 3 x 12 200 14,95A 3 x 3 x 14 200 14,90A 3 x 3 x 16 200 15,35A 3 x 3 x 18 200 16,60A 3 x 3 x 20 200 18,80A 3 x 3 x 25 200 24,00A 3 x 3 x 28 200 24,05A 3 x 3 x 32 200 27,30A 4 x 4 x 8 200 11,10A 4 x 4 x 10 200 11,70A 4 x 4 x 12 200 15,55A 4 x 4 x 14 200 15,60A 4 x 4 x 15 200 14,75A 4 x 4 x 16 200 15,00A 4 x 4 x 18 200 16,35A 4 x 4 x 20 200 18,60A 4 x 4 x 25 200 19,60A 4 x 4 x 28 200 22,30A 4 x 4 x 30 200 24,65A 4 x 4 x 32 200 23,45A 4 x 4 x 40 200 27,25A 4 x 4 x 50 200 32,85A 4 x 4 x 56 200 51,45A 5 x 3 x 10 100 16,10A 5 x 3 x 14 100 22,65A 5 x 3 x 20 100 20,70A 5 x 3 x 25 100 26,80A 5 x 5 x 8 100 12,90A 5 x 5 x 10 100 11,05A 5 x 5 x 12 100 11,05A 5 x 5 x 14 100 12,85A 5 x 5 x 16 100 13,55A 5 x 5 x 18 100 14,75A 5 x 5 x 20 100 15,80
Abmessung VPE Preis €
A 5 x 5 x 22 100 15,80A 5 x 5 x 25 100 18,20A 5 x 5 x 28 100 18,75A 5 x 5 x 30 100 20,15A 5 x 5 x 32 100 21,05A 5 x 5 x 36 100 22,35A 5 x 5 x 40 100 24,30A 5 x 5 x 45 100 27,50A 5 x 5 x 50 100 31,25A 5 x 5 x 56 100 33,15A 5 x 5 x 70 100 40,95A 6 x 4 x 14 100 16,50A 6 x 4 x 18 100 16,55A 6 x 4 x 25 100 20,75A 6 x 4 x 28 100 21,15A 6 x 4 x 40 100 28,80A 6 x 4 x 50 100 32,35A 6 x 6 x 10 100 13,45A 6 x 6 x 12 100 12,70A 6 x 6 x 14 100 15,35A 6 x 6 x 15 100 14,40A 6 x 6 x 16 100 16,10A 6 x 6 x 15 100 17,90A 6 x 6 x 20 100 17,90A 6 x 6 x 22 100 17,75A 6 x 6 x 25 100 19,20A 6 x 6 x 28 100 21,85A 6 x 6 x 30 100 21,95A 6 x 6 x 32 100 23,40A 6 x 6 x 35 100 24,70A 6 x 6 x 36 100 26,00A 6 x 6 x 40 100 27,75A 6 x 6 x 45 100 29,70A 6 x 6 x 50 100 31,85A 6 x 6 x 56 100 36,15A 6 x 6 x 60 100 37,70A 6 x 6 x 63 100 40,05A 6 x 6 x 70 100 42,40A 6 x 6 x 75 100 48,85A 6 x 6 x 80 100 48,85A 6 x 6 x 90 100 54,50
Abmessung VPE Preis €
A 6 x 6 x 100 100 59,15A 8 x 5 x 16 100 15,25A 8 x 5 x 20 100 15,45A 8 x 5 x 25 100 17,55A 8 x 5 x 30 100 21,80A 8 x 5 x 32 100 21,80A 8 x 7 x 12 100 13,15A 8 x 7 x 14 100 14,10A 8 x 7 x 15 100 14,60A 8 x 7 x 16 100 14,75A 8 x 7 x 18 100 15,85A 8 x 7 x 20 100 16,60A 8 x 7 x 22 100 17,70A 8 x 7 x 25 100 19,25A 8 x 7 x 28 100 20,75A 8 x 7 x 30 100 22,70A 8 x 7 x 32 100 22,85A 8 x 7 x 35 100 24,65A 8 x 7 x 36 100 24,90A 8 x 7 x 40 100 27,40A 8 x 7 x 45 100 29,70A 8 x 7 x 50 100 32,75A 8 x 7 x 56 100 35,25A 8 x 7 x 60 50 37,75A 8 x 7 x 63 50 39,00A 8 x 7 x 65 50 41,40A 8 x 7 x 70 50 43,10A 8 x 7 x 80 50 47,55A 8 x 7 x 90 50 53,05A 8 x 7 x 100 50 58,15A 8 x 7 x 110 50 63,55A 8 x 7 x 125 50 73,75A 10 x 6 x 20 100 19,80A 10 x 6 x 25 100 23,85A 10 x 6 x 40 100 35,60A 10 x 8 x 15 100 24,95A 10 x 8 x 20 100 27,15A 10 x 8 x 25 100 28,95A 10 x 8 x 28 100 29,45A 10 x 8 x 30 100 36,75A 10 x 8 x 32 100 37,10
Seite 238 04 / 2019
Preise per 100 Stück
Paßfedern Form A
Parallel keys
Breite bHöhe h
33
44
55
66
87
108
128
149
1610
1811
2012
2214
2514
blankDIN 6885
künftig ISO / EN
Stahl
Clavettes parallèles fixées par vis
-
Abmessung VPE Preis €
A 10 x 8 x 36 100 33,20A 10 x 8 x 40 100 35,25A 10 x 8 x 45 100 38,70A 10 x 8 x 50 100 42,75A 10 x 8 x 55 100 47,65A 10 x 8 x 56 100 46,90A 10 x 8 x 60 100 49,85A 10 x 8 x 63 100 52,65A 10 x 8 x 70 100 58,25A 10 x 8 x 80 100 64,70A 10 x 8 x 85 100 79,80A 10 x 8 x 90 100 71,65A 10 x 8 x 100 100 79,25A 10 x 8 x 110 50 86,80A 10 x 8 x 125 50 86,80A 12 x 6 x 28 50 26,40A 12 x 6 x 32 50 33,50A 12 x 6 x 40 50 35,05A 12 x 6 x 50 50 41,60A 12 x 6 x 60 50 60,45A 12 x 6 x 70 50 62,30A 12 x 6 x 90 50 81,75A 12 x 6 x 100 50 89,85A 12 x 8 x 20 50 27,75A 12 x 8 x 22 50 31,20A 12 x 8 x 25 50 31,95A 12 x 8 x 28 50 34,35A 12 x 8 x 30 50 35,85A 12 x 8 x 32 50 37,10A 12 x 8 x 36 50 42,00A 12 x 8 x 40 50 44,10A 12 x 8 x 45 50 48,60A 12 x 8 x 50 50 53,15A 12 x 8 x 56 50 58,45A 12 x 8 x 60 50 61,90A 12 x 8 x 63 50 64,75A 12 x 8 x 70 50 71,05A 12 x 8 x 75 50 78,10A 12 x 8 x 80 50 80,10A 12 x 8 x 90 50 87,95A 12 x 8 x 100 50 98,40
Abmessung VPE Preis €
A 12 x 8 x 120 50 119,90A 12 x 8 x 140 50 134,75A 14 x 9 x 25 50 40,50A 14 x 9 x 28 50 43,60A 14 x 9 x 30 50 48,30A 14 x 9 x 32 50 49,25A 14 x 9 x 35 50 53,05A 14 x 9 x 36 50 53,90A 14 x 9 x 40 50 58,90A 14 x 9 x 45 50 64,75A 14 x 9 x 50 50 70,65A 14 x 9 x 56 50 78,00A 14 x 9 x 60 50 82,60A 14 x 9 x 63 50 86,30A 14 x 9 x 70 50 94,90A 14 x 9 x 80 50 107,00A 14 x 9 x 90 50 118,95A 14 x 9 x 100 50 131,35A 14 x 9 x 110 25 143,05A 14 x 9 x 130 25 174,40A 14 x 9 x 140 25 179,80A 14 x 9 x 150 25 190,75A 14 x 9 x 180 25 235,90A 16 x 10 x 30 50 60,50A 16 x 10 x 32 50 63,40A 16 x 10 x 36 50 69,15A 16 x 10 x 40 50 74,75A 16 x 10 x 45 50 82,15A 16 x 10 x 50 50 89,65A 16 x 10 x 56 50 101,90A 16 x 10 x 60 25 105,70A 16 x 10 x 63 25 109,45A 16 x 10 x 70 25 120,60A 16 x 10 x 75 25 141,95A 16 x 10 x 80 25 135,55A 16 x 10 x 90 25 151,75A 16 x 10 x 95 25 176,05A 16 x 10 x 100 25 166,25A 18 x 11 x 40 50 102,25A 18 x 11 x 50 50 119,75A 18 x 11 x 55 50 137,30
Abmessung VPE Preis €
A 18 x 11 x 63 50 146,25A 18 x 11 x 70 50 159,35A 18 x 11 x 80 50 177,65A 18 x 11 x 90 50 196,35A 18 x 11 x 100 25 216,15A 18 x 11 x 110 25 235,45A 18 x 11 x 120 25 255,75A 18 x 11 x 125 25 263,25A 18 x 11 x 130 25 273,95A 18 x 11 x 150 25 322,05A 18 x 11 x 160 25 332,35A 20 x 12 x 40 25 133,75A 20 x 12 x 45 25 147,30A 20 x 12 x 50 25 160,45A 20 x 12 x 56 25 171,35A 20 x 12 x 60 25 183,75A 20 x 12 x 63 25 189,00A 20 x 12 x 65 25 194,60A 20 x 12 x 90 25 258,10A 20 x 12 x 100 25 280,60A 20 x 12 x 110 25 320,00A 20 x 12 x 125 25 345,30A 20 x 12 x 140 25 383,70A 22 x 14 x 50 10 207,40A 22 x 14 x 56 10 248,70A 22 x 14 x 70 10 267,80A 22 x 14 x 80 10 296,05A 22 x 14 x 90 10 328,75A 22 x 14 x 100 10 359,60A 22 x 14 x 140 10 488,65
Preise per 100 Stück
04 / 2019 Seite 239
Zylinderschrauben mit Innensechskant und niedrigem
Hexagon socket head cap screws with centre hole an
db1)b2)dkk
M 414
-7
2,8
M 516
-8,53,5
M 618
-104
M 822
-135
M 102632166,5
M 123036187,5
M 1638442410
M 2046523012
M 2454603614
brüniertDIN 6912
künftig ISO / EN
8.8
Vis à six-pans creux, tête plate cylindrique
-
Abmessung VPE Preis €
4 x 6 500 14,704 x 8 500 10,804 x 10 500 7,504 x 12 500 6,704 x 14 500 12,704 x 16 500 8,904 x 18 500 12,704 x 20 500 7,804 x 25 500 10,704 x 30 500 11,704 x 35 500 18,204 x 40 500 19,005 x 6 500 26,305 x 8 500 16,305 x 10 500 8,105 x 12 500 9,605 x 14 500 14,605 x 16 500 9,905 x 18 500 14,105 x 20 500 10,505 x 22 500 24,305 x 25 500 11,005 x 30 500 14,405 x 35 200 17,605 x 40 200 19,505 x 45 200 23,005 x 50 200 32,505 x 55 200 43,005 x 60 200 36,706 x 8 500 35,506 x 10 500 10,906 x 12 500 10,406 x 14 500 11,506 x 16 500 10,106 x 18 500 15,006 x 20 500 11,706 x 22 500 16,706 x 25 500 12,106 x 30 500 13,106 x 35 200 18,006 x 40 200 18,80
Abmessung VPE Preis €
6 x 45 200 25,506 x 50 200 26,606 x 55 200 33,906 x 60 200 31,906 x 65 200 56,006 x 70 200 40,206 x 75 200 69,506 x 80 200 71,506 x 90 100 76,106 x 100 100 128,606 x 110 100 158,406 x 120 100 206,708 x 10 200 46,708 x 12 200 19,608 x 14 200 26,808 x 16 200 17,508 x 18 200 19,308 x 20 200 18,208 x 22 200 29,308 x 25 200 18,808 x 30 200 23,508 x 35 200 27,708 x 40 200 29,408 x 45 200 37,808 x 50 200 43,108 x 55 200 48,208 x 60 200 55,008 x 65 200 74,608 x 70 200 59,808 x 75 200 82,508 x 80 200 79,008 x 90 100 121,408 x 100 100 146,308 x 110 100 159,508 x 120 100 212,3010 x 16 200 33,0010 x 18 200 55,9010 x 20 200 29,5010 x 22 200 40,2010 x 25 200 33,3010 x 30 200 35,70
Abmessung VPE Preis €
10 x 35 100 44,0010 x 40 100 46,1010 x 45 100 61,8010 x 50 100 66,0010 x 55 100 72,0010 x 60 100 79,1010 x 65 100 95,3010 x 70 100 87,3010 x 75 100 142,7010 x 80 100 133,7010 x 90 100 154,3010 x 100 100 197,1010 x 110 50 290,1010 x 120 50 335,6010 x 130 50 414,7010 x 140 50 383,3012 x 16 100 63,1012 x 20 100 60,6012 x 25 100 63,8012 x 30 100 67,1012 x 35 100 69,3012 x 40 100 73,3012 x 45 100 83,0012 x 50 100 90,9012 x 55 100 111,1012 x 60 100 99,3012 x 65 50 176,1012 x 70 50 147,3012 x 75 50 183,6012 x 80 50 175,3012 x 90 50 242,8012 x 100 50 269,0012 x 110 50 354,3012 x 120 50 431,1012 x 130 50 409,2012 x 140 50 619,7012 x 150 50 585,0012 x 160 50 1307,9014 x 25 100 358,6014 x 30 100 358,5014 x 35 100 250,90
Seite 240 04 / 2019
Preise per 100 Stück
Zylinderschrauben mit Innensechskant und niedrigem
Hexagon socket head cap screws with centre hole an
db1)b2)dkk
M 414
-7
2,8
M 516
-8,53,5
M 618
-104
M 822
-135
M 102632166,5
M 123036187,5
M 1638442410
M 2046523012
M 2454603614
brüniertDIN 6912
künftig ISO / EN
8.8
Vis à six-pans creux, tête plate cylindrique
-
Abmessung VPE Preis €
14 x 40 100 262,3014 x 45 50 322,5014 x 50 50 385,0014 x 60 50 441,6014 x 70 50 495,9014 x 75 50 495,9014 x 80 50 500,0014 x 90 50 505,0014 x 100 50 514,4016 x 25 50 229,2016 x 30 50 171,8016 x 35 50 176,0016 x 40 50 185,2016 x 45 50 200,0016 x 50 50 210,1016 x 55 50 233,3016 x 60 50 267,9016 x 65 25 313,5016 x 70 25 301,7016 x 75 25 314,6016 x 80 25 314,8016 x 90 25 419,2016 x 100 25 560,6016 x 110 25 635,1016 x 120 25 675,0016 x 130 25 880,0016 x 140 25 935,0020 x 30 25 533,5020 x 35 25 627,3020 x 40 25 550,0020 x 45 25 489,8020 x 50 25 408,8020 x 55 25 518,5020 x 60 25 423,6020 x 65 25 691,3020 x 70 25 503,0020 x 75 25 652,3020 x 80 25 650,8020 x 90 25 700,0020 x 100 25 811,3020 x 110 25 820,00
Abmessung VPE Preis €
20 x 120 25 840,0020 x 130 25 1321,8020 x 140 25 1350,0024 x 40 25 1384,4024 x 50 25 1208,7024 x 60 25 1452,0024 x 70 25 1499,7024 x 80 25 1778,3024 x 90 25 1800,0024 x 100 25 1834,3024 x 110 25 1900,00
Preise per 100 Stück
04 / 2019 Seite 241
Zylinderschrauben mit Innensechskant und niedrigem
Hexagon socket head cap screws with centre hole an
db1)b2)dkk
M 414
-7
2,8
M 516
-8,53,5
M 618
-104
M 822
-135
M 102632166,5
M 123036187,5
M 1638442410
M 2046523012
M 2454603614
verz. blauDIN 6912
künftig ISO / EN
8.8
Vis à six-pans creux, tête plate cylindrique
-
Abmessung VPE Preis €
4 x 6 500 14,804 x 8 500 12,604 x 10 500 10,104 x 12 500 7,604 x 14 500 8,504 x 16 500 7,504 x 18 500 10,504 x 20 500 9,404 x 25 500 10,204 x 30 500 15,104 x 35 500 15,904 x 40 500 17,905 x 6 500 34,305 x 8 500 15,605 x 10 500 10,305 x 12 500 8,305 x 14 500 11,405 x 16 500 9,505 x 18 500 15,305 x 20 500 11,105 x 25 500 12,105 x 30 500 14,205 x 35 200 18,605 x 40 200 22,805 x 45 200 26,905 x 50 200 32,305 x 55 200 48,605 x 60 200 41,406 x 8 500 30,806 x 10 500 12,206 x 12 500 8,906 x 14 500 11,506 x 16 500 10,606 x 18 500 12,306 x 20 500 12,106 x 22 500 18,706 x 25 500 13,006 x 30 500 15,706 x 35 200 19,006 x 40 200 22,306 x 45 200 23,80
Abmessung VPE Preis €
6 x 50 200 23,906 x 55 200 50,006 x 60 200 35,106 x 65 200 73,506 x 70 200 47,106 x 80 100 67,406 x 90 100 84,606 x 100 100 174,508 x 10 200 43,908 x 12 200 18,808 x 14 200 31,208 x 16 200 17,208 x 20 200 17,408 x 22 200 29,808 x 25 200 22,408 x 30 200 24,208 x 35 200 27,408 x 40 200 30,208 x 45 200 38,108 x 50 200 39,908 x 60 200 56,308 x 65 200 60,008 x 70 200 66,008 x 80 200 89,308 x 90 100 127,808 x 100 100 74,8010 x 16 200 38,1010 x 20 200 32,5010 x 25 200 35,7010 x 30 200 36,5010 x 35 100 44,0010 x 40 100 50,1010 x 45 100 64,1010 x 50 100 62,1010 x 55 100 84,1010 x 60 100 73,0010 x 70 100 109,7010 x 80 50 164,6010 x 90 50 204,2010 x 100 50 266,5010 x 120 50 387,50
Abmessung VPE Preis €
12 x 16 100 186,6012 x 20 100 60,9012 x 25 100 57,0012 x 30 100 61,8012 x 35 100 61,1012 x 40 100 68,9012 x 45 100 78,0012 x 50 100 88,7012 x 60 50 115,4012 x 70 50 170,1012 x 80 50 222,6012 x 90 50 259,1012 x 100 50 280,2012 x 110 50 302,3012 x 120 50 527,5016 x 25 50 292,5016 x 30 50 177,2016 x 35 50 189,5016 x 40 50 163,5016 x 45 50 189,5016 x 50 50 271,2016 x 60 50 321,1016 x 70 50 398,4016 x 80 50 460,0016 x 90 25 550,0016 x 100 25 628,40
Seite 242 04 / 2019
Preise per 100 Stück
Zylinderschrauben mit Innensechskant und niedrigem
Hexagon socket head cap screws with centre hole an
dbd2ks
M 4147
2,83
M 5168,53,5
4
M 6181045
M 8221356
M 1026166,5
8
M 1230187,510
M 1638241014
blankDIN 6912
künftig ISO / EN
A2
Vis à six-pans creux, tête plate cylindrique
-
Abmessung VPE Preis €
4 x 8 1000 34,604 x 10 1000 26,354 x 12 1000 26,354 x 16 1000 21,204 x 20 500 22,254 x 25 500 23,804 x 30 500 27,404 x 35 200 30,704 x 40 200 33,255 x 8 500 37,705 x 10 500 29,455 x 12 500 29,455 x 16 500 23,255 x 20 500 24,805 x 25 200 26,355 x 30 200 30,705 x 35 200 33,605 x 40 200 36,305 x 45 200 45,005 x 50 200 49,606 x 8 500 38,756 x 10 500 38,756 x 12 500 36,706 x 16 200 29,456 x 18 200 32,056 x 20 200 32,056 x 25 200 33,606 x 30 200 36,706 x 35 200 41,356 x 40 200 45,456 x 45 100 54,756 x 50 100 60,456 x 55 100 67,006 x 60 100 74,906 x 70 100 92,558 x 10 500 75,958 x 12 500 66,108 x 16 200 55,808 x 20 200 52,708 x 25 100 50,108 x 30 100 52,70
Abmessung VPE Preis €
8 x 35 100 57,358 x 40 100 63,008 x 45 100 73,158 x 50 100 82,658 x 55 100 97,108 x 60 100 107,458 x 70 100 127,558 x 80 100 166,208 x 90 100 184,108 x 100 50 216,9010 x 16 100 116,2010 x 20 100 108,4510 x 25 100 101,2510 x 30 100 106,4010 x 35 100 110,4510 x 40 100 119,3010 x 45 100 138,0510 x 50 50 148,3010 x 55 50 173,0010 x 60 50 182,3010 x 70 50 219,0010 x 80 50 260,8010 x 90 50 294,9010 x 100 50 360,5012 x 16 50 193,6512 x 20 50 160,1012 x 25 50 148,3012 x 30 50 152,3512 x 35 50 161,0512 x 40 50 176,4012 x 45 50 194,3012 x 50 50 209,1512 x 55 50 237,5512 x 60 50 248,0012 x 70 50 276,1012 x 80 25 356,3512 x 90 25 406,5012 x 100 25 480,65
Preise per 100 Stück
04 / 2019 Seite 243
Sechskantschrauben mit Flansch
Hexagon head screws
dk Nennmaßb 2s Nennmaß
M 66,61810
M 88,12213
M 109,22615
M 1211,5
3016
M 1614,4
3821
M 2017,1
4627
blankDIN 6921
künftig ISO / EN
A2
Vis à tête hexagonale
-
Abmessung VPE Preis €
5 x 10 200 19,005 x 12 200 19,505 x 16 200 20,255 x 20 200 21,255 x 25 200 22,505 x 30 200 24,255 x 35 200 26,255 x 40 200 28,006 x 10 200 28,006 x 12 200 29,006 x 16 200 30,506 x 20 200 32,006 x 25 200 34,006 x 30 200 36,256 x 35 200 38,506 x 40 200 40,756 x 45 200 43,006 x 50 200 45,256 x 60 200 49,508 x 18 200 46,508 x 20 200 48,758 x 25 200 51,758 x 30 200 55,508 x 35 200 58,758 x 40 200 62,508 x 45 200 65,758 x 50 200 69,258 x 60 200 76,5010 x 16 100 105,0010 x 20 100 103,0010 x 25 100 105,0010 x 30 100 125,0010 x 35 100 117,5010 x 40 100 123,0010 x 45 100 131,5010 x 50 100 143,0010 x 60 100 149,50
Seite 244 04 / 2019
Preise per 100 Stück
Flachbundmutter
Flat collar-nuts
ddcsm
M 410,4
74
M 511,8
85
M 614,2
106
M 817,9
138
M 1021,8
1610
M 12261812
verz. blauDIN 6923
künftig ISO / EN e1661
8
Ecrous cul d'oeuf
-
Abmessung VPE Preis €
4 1000 4,905 1000 3,706 1000 4,458 500 9,1510 200 11,7512 200 23,75
Preise per 100 Stück
04 / 2019 Seite 245
Flachbundmutter mit Sperrzähnen
Flat collar-nuts
ddcsm
M 410,4
74
M 511,8
85
M 614,2
106
M 817,9
138
M 1021,8
1610
M 12261812
verz. blauDIN 6923
künftig ISO / EN e1661
8
Ecrous cul d'oeuf
-
Abmessung VPE Preis €
4 Sperrzahn 1000 6,305 Sperrzahn 1000 4,906 Sperrzahn 1000 6,008 Sperrzahn 500 12,2010 Sperrzahn 200 15,6012 Sperrzahn 200 30,95
Seite 246 04 / 2019
Preise per 100 Stück
Flachbundmutter mit Sperrzähnen
Flat collar-nuts
ddcsm
M 410.4
74
M 511,8
85
M 614,2
106
M 817,9
138
M 1021,8
1610
M 12261812
blankDIN 6923
künftig ISO / EN e1661
A2
Ecrous cul d'oeuf
-
Abmessung VPE Preis €
3 Sperrzahn 500 8,754 Sperrzahn 500 8,755 Sperrzahn 500 9,756 Sperrzahn 200 12,008 Sperrzahn 100 20,7510 Sperrzahn 100 45,2512 Sperrzahn 100 85,00
Preise per 100 Stück
04 / 2019 Seite 247
Sechskantmuttern mit Klemmteil
"prevailing torque type hexagon nuts; all metal nu
dm´h maxs
63,3
810
84,4
813
105,51016
126,61218
147,71421
168,81624
verz. blauDIN 6925
künftig ISO / EN
8
"Écrous auto freinés hexagonaux; écrous tout metal
-
Abmessung VPE Preis €
4 1000 8,005 1000 8,406 1000 8,658 1000 13,9510 500 25,9012 500 42,5514 500 71,4516 200 74,5520 100 137,4524 50 251,4530 50 489,20
Seite 248 04 / 2019
Preise per 100 Stück
Blindniete Alu-Standard Flachrundkopf
Blind rivet alu/steel standard
D 1D 2Loch ødk
2,45,02,51,5
0,55
36,53,11,80,8
3,26,53,3
1,950,8
48,04,12,11,0
4,89,54,92,71,1
59,55,12,71,1
6126,13,21,5
6,4136,5
3,651,8
verz. blauDIN 7337
künftig ISO / EN
Alu
auch in anderen Werkstoff-und Kopfkombinationen !
-
Abmessung VPE Preis €
2,4 x 4 500 37,902,4 x 6 1000 41,802,4 x 8 500 45,403 x 4 500 37,903 x 5 500 38,003 x 6 500 38,103 x 7 500 40,003 x 8 500 42,703 x 10 500 45,903 x 12 500 50,903 x 14 500 58,803 x 16 500 68,303 x 18 500 87,803 x 20 500 98,303,2 x 4 500 38,603,2 x 6 500 39,103,2 x 8 500 43,703,2 x 10 500 47,003,2 x 18 500 91,604 x 5 500 43,704 x 6 500 43,704 x 7 500 51,704 x 8 500 47,004 x 10 500 53,204 x 12 500 59,404 x 14 500 67,704 x 16 500 74,904 x 18 500 81,304 x 20 500 88,904 x 25 500 107,904 x 30 500 158,004,8 x 6 500 63,104,8 x 8 500 64,504,8 x 10 500 68,004,8 x 12 500 76,804,8 x 14 500 100,004,8 x 16 500 94,104,8 x 20 500 128,004,8 x 25 500 141,405 x 6 500 64,505 x 8 500 68,60
Abmessung VPE Preis €
5 x 10 500 72,005 x 12 500 77,305 x 14 500 85,705 x 16 500 94,805 x 18 500 115,605 x 20 500 130,405 x 25 500 146,205 x 30 500 167,605 x 35 250 195,605 x 40 250 224,105 x 45 250 265,505 x 40 100 290,205 x 60 250 405,105 x 70 250 507,805 x 80 250 613,806 x 8 500 99,406 x 10 500 106,206 x 12 500 112,706 x 14 500 120,006 x 16 500 128,306 x 20 500 143,106 x 25 500 177,706 x 28 500 200,006 x 30 500 212,306 x 35 250 247,806,4 x 10 250 140,006,4 x 16 250 149,506,4 x 30 250 221,70
Preise per 1000 Stück
04 / 2019 Seite 249
Blindniete Alu-Großkopf Flachrundkopf
Blind rivet alu/steel bighead
D 1D 2Loch ødk
2,4
2,51,5
0,55
3
3,11,80,8
3,2
3,31,950,8
4
4,12,11,0
4,8
4,92,71,1
5
5,12,71,1
6
6,13,21,5
6,4
6,53,651,8
verz. blauDIN 7337
künftig ISO / EN
Alu
auch in anderen Werkstoff-und Kopfkombinationen !
-
Abmessung VPE Preis €
4 x 6 K 12 mm 500 65,404 x 8 K 12 mm 500 72,704 x 10 K 12 mm 500 80,104 x 12 K 12 mm 500 85,104 x 14 K 12 mm 500 90,004 x 16 K 12 mm 500 100,404 x 20 K 12 mm 500 123,904,8 x 25 K 16 mm250 172,604,8 x 30 K 16 mm250 170,005 x 8 K 14 mm 500 83,805 x 10 K 14 mm 500 91,505 x 12 K 14 mm 500 100,805 x 12 K 16 mm 500 105,005 x 14 K 14 mm 500 106,105 x 16 K 11 mm 500 99,605 x 16 K 16 mm 500 120,005 x 18 K 11 mm 500 128,505 x 18 K 14 mm 500 125,705 x 18 K 16 mm 500 130,005 x 20 K 14 mm 250 140,105 x 25 K 14 mm 500 168,405 x 30 K 14 mm 250 200,60
Seite 250 04 / 2019
Preise per 1000 Stück
Scheiben für Schrauben mit schweren Spannhülsen
Washers for bots with heavy type spring pins
d1d2s
3,291
4,3121,6
5,3152
6,4173
8,4214
10,5254
13306
15366
17406
19448
21448
23508
255010
286010
316810
verz. blauDIN 7349
künftig ISO / EN
HV100
Rondelles
-
Abmessung VPE Preis €
d 4,3 1000 2,75d 5,3 1000 4,95d 6,4 500 10,10d 8,4 500 17,10d 10,5 200 23,15d 13 100 42,85d 15 100 71,05d 17 100 72,10d 21 100 113,60
Preise per 100 Stück
04 / 2019 Seite 251
Scheiben für Schrauben mit schweren Spannhülsen
Washers
d1d2s
3,291
4,3121,6
5,3152
6,4173
8,4214
10,5254
13306
15366
17406
19448
21448
23508
255010
blankDIN 7349
künftig ISO / EN
A2
Rondelles
-
Abmessung VPE Preis €
d 3,2 1000 2,70d 4,3 1000 4,00d 5,3 1000 4,20d 6,4 500 8,50d 8,4 500 17,00d 10,5 200 23,00d 13 200 65,00d 17 100 100,00d 21 50 122,00
Seite 252 04 / 2019
Preise per 100 Stück
Gewindefurchende Schrauben (Kopf DIN EN ISO 7045)
Thread cutting screws
Gewinde dPFurchbereich madkk
3.00,5
25,62,4
3.50,62,4
72,6
4.00,72,8
83,1
5,00,83,29,53,7
6,014
124,6
verz. blauDIN 7500 CE
künftig ISO / EN
gehärtet
auch mit Kopf nach DIN lieferbar
-
Abmessung VPE Preis €
CE-Z M 2 x 4 1000 3,80CE-Z M 2 x 5 1000 3,70CE-Z M 2 x 6 1000 4,05CE-Z M 2 x 8 1000 4,25CE-Z M 2 x 10 1000 4,50CE-Z M 2,5 x 4 1000 4,40CE-Z M 2,5 x 5 1000 4,40CE-Z M 2,5 x 6 1000 4,40CE-Z M 2,5 x 8 1000 4,20CE-Z M 2,5 x10 1000 4,50CE-Z M 2,5 x 12 1000 4,60CE-Z M 3 x 4 1000 6,10CE-Z M 3 x 5 1000 4,20CE-Z M 3 x 6 1000 4,05CE-Z M 3 x 8 1000 4,05CE-Z M 3 x 10 1000 4,20CE-Z M 3 x 12 1000 4,60CE-Z M 3 x 16 1000 4,95CE-Z M 3 x 20 1000 5,50CE-Z M 3 x 30 1000 10,15CE-Z M 4 x 6 1000 5,85CE-Z M 4 x 8 1000 6,25CE-Z M 4 x 10 1000 6,45CE-Z M 4 x 12 1000 6,75CE-Z M 4 x 16 1000 7,60CE-Z M 4 x 20 1000 8,10CE-Z M 4 x 25 1000 9,10CE-Z M 4 x 30 1000 12,10CE-Z M 5 x 6 1000 9,35CE-Z M 5 x 8 1000 8,40CE-Z M 5 x 10 1000 9,10CE-Z M 5 x 12 1000 9,65CE-Z M 5 x 16 1000 11,45CE-Z M 5 x 20 1000 12,65CE-Z M 5 x 25 1000 17,05CE-Z M 5 x 30 1000 17,95CE-Z M 5 x 40 1000 21,70CE-Z M 6 x 8 500 23,65CE-Z M 6 x 10 500 22,55CE-Z M 6 x 12 500 16,40CE-Z M 6 x 16 500 17,95
Abmessung VPE Preis €
CE-Z M 6 x 20 500 19,00CE-Z M 6 x 25 500 22,85CE-Z M 6 x 30 500 24,95CE-Z M 6 x 35 500 26,15CE-Z M 6 x 40 500 29,45
Preise per 100 Stück
04 / 2019 Seite 253
Gewindefurchende Schrauben (Kopf DIN EN ISO 14583)
Thread cutting screws
Gewinde dPFurchbereich madkk
3.00,5
25,62,4
3.50,62,4
72,6
4.00,72,8
83,1
5,00,83,29,53,7
6,014
124,6
verz. blauDIN 7500 PE
künftig ISO / EN
gehärtet
auch mit Kopf nach DIN lieferbar
-
Abmessung VPE Preis €
PE-T M 3 x 5 1000 5,10PE-T M 3 x 6 1000 5,35PE-T M 3 x 8 1000 5,35PE-T M 3 x 10 1000 5,40PE-T M 4 x 6 1000 7,80PE-T M 4 x 8 1000 8,00PE-T M 4 x 10 1000 8,35PE-T M 4 x 12 1000 8,85PE-T M 4 x 16 1000 9,85PE-T M 5 x 8 1000 10,95PE-T M 5 x 10 1000 11,95PE-T M 5 x 12 1000 12,55PE-T M 5 x 16 1000 15,05PE-T M 5 x 20 1000 16,90PE-T M 6 x 10 500 29,25PE-T M 6 x 12 500 21,85PE-T M 6 x 16 500 23,45PE-T M 6 x 20 500 24,70PE-T M 6 x 25 500 30,00
Seite 254 04 / 2019
Preise per 100 Stück
Gewindefurchende Schrauben (Kopf DIN EN ISO 4017)
Thread cutting screws
Gewinde dPFurchbereich madkk
3,00,5
25,62,4
3,50,62,4
72,6
4,00,72,8
83,1
5,00,83,29,53,7
6,014
124,6
verz. blauDIN 7500 DE
künftig ISO / EN
gehärtet-
Abmessung VPE Preis €
DE M 4 x 8 1000 7,90DE M 4 x 10 1000 8,45DE M 4 x 12 1000 9,30DE M 4 x 16 1000 10,70DE M 4 x 20 1000 11,45DE M 5 x 8 1000 12,00DE M 5 x 10 1000 13,50DE M 5 x 12 1000 14,65DE M 5 x 16 1000 16,55DE M 5 x 20 1000 18,05DE M 5 x 25 1000 21,85DE M 5 x 30 1000 23,65DE M 6 x 8 1000 30,65DE M 6 x 10 1000 28,70DE M 6 x 12 1000 24,75DE M 6 x 16 1000 25,90DE M 6 x 20 1000 30,15DE M 6 x 25 1000 31,25DE M 6 x 30 1000 38,25DE M 8 x 16 1000 61,25DE M 8 x 20 1000 64,95DE M 8 x 25 1000 68,65DE M 8 x 30 1000 73,70DE M 8 x 40 1000 82,40
Preise per 100 Stück
04 / 2019 Seite 255
Gewindefurchende Schrauben (Kopf DIN EN ISO 7046)
Thread cutting screws
Gewinde dPFurchbereich madk-max.k-max.
3,00,5
25,5
1,65
3,50,62,47,3
2,35
4,00,72,88,42,7
5,00,83,29,32,7
6,014
11,33,3
verz. blauDIN 7500 ME
künftig ISO / EN
gehärtet
auch mit Kopf nach DIN lieferbar
-
Abmessung VPE Preis €
ME-Z M 2,5 x 5 1000 4,25ME-Z M 2,5 x 6 1000 4,25ME-Z M 2,5 x 8 1000 4,00ME-Z M 2,5 x 10 1000 4,10ME-Z M 3 x 6 1000 4,10ME-Z M 3 x 8 1000 4,10ME-Z M 3 x 10 1000 4,25ME-Z M 3 x 12 1000 4,70ME-Z M 3 x 16 1000 5,05ME-Z M 3 x 20 1000 5,80ME-Z M 3 x 25 1000 6,05ME-Z M 3,5 x 16 1000 7,75ME-Z M 4 x 8 1000 6,25ME-Z M 4 x 10 1000 6,30ME-Z M 4 x 12 1000 6,80ME-Z M 4 x 16 1000 7,75ME-Z M 4 x 20 1000 8,30ME-Z M 4 x 25 1000 10,70ME-Z M 4 x 30 1000 11,55ME-Z M 5 x 10 1000 9,15ME-Z M 5 x 12 1000 9,95ME-Z M 5 x 16 1000 11,55ME-Z M 5 x 20 1000 12,95ME-Z M 5 x 25 1000 16,25ME-Z M 5 x 30 1000 17,50ME-Z M 5 x 35 1000 20,00ME-Z M 5 x 40 1000 22,20ME-Z M 6 x 12 1000 16,10ME-Z M 6 x 16 1000 16,90ME-Z M 6 x 20 1000 18,30ME-Z M 6 x 25 1000 21,70ME-Z M 6 x 30 1000 24,20ME-Z M 6 x 35 1000 24,75ME-Z M 6 x 40 1000 27,60ME-Z M 6 x 50 1000 40,50
Seite 256 04 / 2019
Preise per 100 Stück
Gewindefurchende Schrauben (Kopf DIN EN ISO 4762)
Thread cutting screws
Gewinde dPFurchbereich madkk
3,00,5
25,62,4
3,50,62,4
72,6
4,00,72,8
83,1
5,00,83,29,53,7
6,014
124,6
verz. blauDIN 7500 EE
künftig ISO / EN
gehärtet-
Abmessung VPE Preis €
EE M 4 x 8 1000 7,90EE M 4 x 10 1000 8,45EE M 4 x 12 1000 9,30EE M 4 x 16 1000 10,70EE M 4 x 20 1000 11,45EE M 5 x 8 1000 12,00EE M 5 x 10 1000 13,50EE M 5 x 12 1000 14,65EE M 5 x 16 1000 16,55EE M 5 x 20 1000 18,05EE M 5 x 25 1000 21,85EE M 5 x 30 1000 23,65EE M 6 x 8 1000 30,65EE M 6 x 10 1000 28,70EE M 6 x 12 1000 24,75EE M 6 x 16 1000 25,90EE M 6 x 20 1000 30,15EE M 6 x 25 1000 31,25EE M 6 x 30 1000 38,25EE M 8 x 16 1000 61,25EE M 8 x 20 1000 64,95EE M 8 x 25 1000 68,65EE M 8 x 30 1000 73,70EE M 8 x 40 1000 82,40
Preise per 100 Stück
04 / 2019 Seite 257
Bohrschrauben Linsenkopf Kreuzschlitz
Self drilling screws, pan head, cross recessed
dBohrbereich vonBlechdicke bisdp max.
2,90,71,92,3
3,50,7
2,252,8
3,90,72,43,1
4,21,75
33,6
4,81,754,44,1
5,51,755,254,8
6,326
5,8
verz. blauDIN 7504 MH
künftig ISO / EN i15481
gehärtet
Vis auto-perceuse
-
Abmessung VPE Preis €
2,9 x 9,5 1000 5,802,9 x 13 1000 5,402,9 x 16 1000 5,452,9 x 19 1000 6,503,5 x 9,5 1000 6,103,5 x 13 1000 6,253,5 x 16 1000 6,303,5 x 19 1000 7,253,5 x 22 1000 8,553,5 x 25 1000 8,903,5 x 32 1000 10,303,9 x 9,5 1000 6,553,9 x 13 1000 6,853,9 x 16 1000 7,153,9 x 19 1000 7,253,9 x 22 1000 8,053,9 x 25 1000 8,353,9 x 32 1000 9,453,9 x 38 1000 11,603,9 x 45 1000 15,654,2 x 13 1000 7,504,2 x 16 1000 7,804,2 x 19 1000 7,904,2 x 22 1000 9,854,2 x 25 1000 10,404,2 x 32 1000 11,054,2 x 38 1000 14,004,2 x 45 1000 19,104,2 x 50 1000 23,154,8 x 13 500 10,154,8 x 16 500 9,504,8 x 19 500 9,904,8 x 22 500 10,454,8 x 25 500 11,604,8 x 32 500 12,554,8 x 38 500 13,354,8 x 45 500 16,504,8 x 50 500 17,754,8 x 50 500 17,755,5 x 19 500 12,505,5 x 22 500 14,95
Abmessung VPE Preis €
5,5 x 25 500 15,555,5 x 32 500 16,905,5 x 38 500 18,305,5 x 45 500 22,205,5 x 50 500 24,706,3 x 19 500 17,456,3 x 22 500 19,756,3 x 25 500 22,306,3 x 32 500 26,256,3 x 38 500 27,356,3 x 45 500 31,006,3 x 50 500 34,056,3 x 60 500 39,70
Seite 258 04 / 2019
Preise per 100 Stück
Bohrschrauben Linsenkopf mit TX
Self drilling screws, pan head, cross recessed
dBohrbereich vonBlechdicke bisdp max.
2,90,71,92,3
3,50,7
2,252,8
3,90,72,43,1
4,21,75
33,6
4,81,754,44,1
5,51,755,254,8
6,326
5,8
verz. blauDIN 7504 MT
künftig ISO / EN
gehärtet
Vis auto-perceuse
-
Abmessung VPE Preis €
2,9 x 9,5 1000 5,802,9 x 13 1000 5,402,9 x 16 1000 5,452,9 x 19 1000 6,503,5 x 9,5 1000 6,103,5 x 13 1000 6,253,5 x 16 1000 6,303,5 x 19 1000 7,253,5 x 22 1000 8,553,5 x 25 1000 8,903,5 x 32 1000 10,303,9 x 9,5 1000 6,553,9 x 13 1000 6,853,9 x 16 1000 7,153,9 x 19 1000 7,253,9 x 22 1000 8,053,9 x 25 1000 8,353,9 x 32 1000 9,453,9 x 38 1000 11,603,9 x 45 1000 15,654,2 x 13 1000 7,504,2 x 16 1000 7,804,2 x 19 1000 7,904,2 x 22 1000 9,854,2 x 25 1000 10,404,2 x 32 1000 11,054,2 x 38 1000 14,004,2 x 45 1000 19,104,2 x 50 1000 23,154,8 x 13 500 10,154,8 x 16 500 9,504,8 x 19 500 9,904,8 x 22 500 10,454,8 x 25 500 11,604,8 x 32 500 12,554,8 x 38 500 13,354,8 x 45 500 16,504,8 x 50 500 17,755,5 x 16 500 12,505,5 x 19 500 12,505,5 x 22 500 14,95
Abmessung VPE Preis €
5,5 x 25 500 15,555,5 x 32 500 16,905,5 x 38 500 18,305,5 x 45 500 22,205,5 x 50 500 24,706,3 x 19 500 17,456,3 x 22 500 19,756,3 x 25 500 22,306,3 x 32 500 26,256,3 x 38 500 27,356,3 x 45 500 31,006,3 x 50 500 34,056,3 x 60 500 39,70
Preise per 100 Stück
04 / 2019 Seite 259
Bohrschrauben Sechskantkopf mit Bund
Self drilling screws, hexagon head
dBohrbereich vonBlechdicke bisdp max.s
3,50,7
2,252,85,5
3,90,72,43,15,5
4,21,75
33,6
7
4,81,754,44,1
8
5,51,755,254,8
8
6,326
5,810
verz. blauDIN 7504 K
künftig ISO / EN i15480
gehärtet
Vis auto-perceuse
-
Abmessung VPE Preis €
3,5 x 9,5 1000 6,603,5 x 13 1000 6,753,5 x 16 1000 7,403,5 x 19 1000 8,453,5 x 22 1000 9,653,5 x 25 1000 9,803,5 x 32 1000 10,353,9 x 13 1000 7,453,9 x 16 1000 8,403,9 x 19 1000 9,353,9 x 22 1000 10,853,9 x 25 1000 10,303,9 x 32 1000 13,054,2 x 13 1000 8,104,2 x 16 1000 8,504,2 x 19 1000 8,754,2 x 22 1000 10,904,2 x 25 1000 11,604,2 x 32 1000 13,154,2 x 38 1000 15,804,8 x 13 500 10,954,8 x 16 500 10,454,8 x 19 500 12,554,8 x 22 500 15,554,8 x 25 500 15,504,8 x 32 500 18,804,8 x 38 500 20,104,8 x 45 500 23,754,8 x 50 500 25,655,5 x 16 500 20,155,5 x 19 500 13,455,5 x 22 500 16,555,5 x 25 500 15,705,5 x 32 500 19,005,5 x 38 500 20,805,5 x 45 500 25,555,5 x 50 250 26,055,5 x 60 250 28,205,5 x 70 250 30,955,5 x 80 250 33,406,3 x 16 500 18,15
Abmessung VPE Preis €
6,3 x 19 500 18,756,3 x 22 500 22,006,3 x 25 500 22,556,3 x 32 500 24,356,3 x 38 500 28,406,3 x 45 250 32,256,3 x 50 250 35,606,3 x 60 250 41,556,3 x 70 250 46,806,3 x 80 250 52,75
Seite 260 04 / 2019
Preise per 100 Stück
Bohrschrauben Senkkopf Kreuzschlitz
Self drilling screws, flat head, cross recessed
dBohrbereich vonBlechdicke bisdp max.
2,90,71,92,3
3,50,7
2,252,8
3,90,72,43,1
4,21,75
33,6
4,81,754,44,1
5,51,755,254,8
6,326
5,8
verz. blauDIN 7504 OH
künftig ISO / EN i15482
gehärtet
Vis auto-perceuse
-
Abmessung VPE Preis €
2,9 x 13 1000 6,002,9 x 16 1000 5,452,9 x 19 1000 6,503,5 x 9,5 1000 5,803,5 x 13 1000 6,253,5 x 16 1000 6,403,5 x 19 1000 7,303,5 x 22 1000 7,903,5 x 25 1000 7,403,9 x 13 1000 6,853,9 x 16 1000 7,153,9 x 19 1000 7,253,9 x 22 1000 8,053,9 x 25 1000 8,353,9 x 32 1000 9,453,9 x 38 1000 11,653,9 x 45 1000 15,653,9 x 50 1000 18,754,2 x 13 1000 8,204,2 x 16 1000 7,804,2 x 19 1000 7,904,2 x 22 1000 9,854,2 x 25 1000 9,504,2 x 32 1000 10,104,2 x 38 1000 12,904,2 x 45 1000 18,154,2 x 50 1000 20,054,2 x 55 1000 23,154,8 x 16 500 9,504,8 x 19 500 10,954,8 x 22 500 11,554,8 x 25 500 11,604,8 x 32 500 12,554,8 x 38 500 13,654,8 x 45 500 16,904,8 x 45 500 18,654,8 x 50 500 17,554,8 x 60 500 19,354,8 x 70 500 21,154,8 x 80 500 22,855,5 x 19 500 13,70
Abmessung VPE Preis €
5,5 x 25 500 17,005,5 x 32 500 17,555,5 x 38 500 17,555,5 x 45 500 18,655,5 x 45 500 18,655,5 x 50 500 20,055,5 x 60 500 22,255,5 x 60 500 22,256,3 x 19 500 17,456,3 x 22 500 23,256,3 x 25 500 24,206,3 x 32 500 23,956,3 x 38 500 25,106,3 x 38 500 25,106,3 x 45 250 28,406,3 x 50 250 28,506,3 x 60 250 30,95
Preise per 100 Stück
04 / 2019 Seite 261
Bohrschrauben Senkkopf mit TX
Self drilling screws, flat head, cross recessed
dBohrbereich vonBlechdicke bisdp max.
2,90,71,92,3
3,50,7
2,252,8
3,90,72,43,1
4,21,75
33,6
4,81,754,44,1
5,51,755,254,8
6,326
5,8
verz. blauDIN 7504 OT
künftig ISO / EN
gehärtet
Vis auto-perceuse
-
Abmessung VPE Preis €
2,9 x 13 1000 6,002,9 x 16 1000 5,452,9 x 19 1000 6,503,5 x 9,5 1000 5,803,5 x 13 1000 6,253,5 x 16 1000 6,403,5 x 19 1000 7,303,5 x 22 1000 7,903,5 x 25 1000 7,403,9 x 13 1000 6,853,9 x 16 1000 7,153,9 x 19 1000 7,253,9 x 22 1000 8,053,9 x 25 1000 8,353,9 x 32 1000 9,453,9 x 38 1000 11,653,9 x 45 1000 15,653,9 x 50 1000 18,754,2 x 13 1000 8,204,2 x 16 1000 7,804,2 x 19 1000 7,904,2 x 22 1000 9,854,2 x 25 1000 9,504,2 x 32 1000 10,104,2 x 38 1000 12,904,2 x 45 1000 18,154,2 x 50 1000 20,054,2 x 55 1000 23,154,8 x 16 500 9,504,8 x 19 500 10,954,8 x 22 500 11,554,8 x 25 500 11,604,8 x 32 500 12,554,8 x 38 500 13,654,8 x 38 500 13,654,8 x 45 500 16,904,8 x 50 500 17,554,8 x 60 500 19,354,8 x 70 500 21,154,8 x 80 500 22,855,5 x 19 500 13,70
Abmessung VPE Preis €
5,5 x 25 500 17,005,5 x 32 500 17,555,5 x 38 500 17,555,5 x 38 500 17,555,5 x 45 500 18,655,5 x 50 500 20,056,3 x 19 500 17,456,3 x 22 500 23,256,3 x 25 500 24,206,3 x 32 500 23,956,3 x 38 500 25,106,3 x 45 250 28,406,3 x 50 250 28,506,3 x 50 250 34,256,3 x 60 250 30,956,3 x 60 250 37,156,3 x 70 250 33,356,3 x 80 250 42,656,3 x 80 250 42,65
Seite 262 04 / 2019
Preise per 100 Stück
Sicherungsmuttern
Self locking nuts
dsme
M 8133,515
M 10174
19,6
M 12194,5
21,9
M 14225
25,4
M 16245
27,7
M 20306
34,6
M 22326
36,9
M 24367
41,6
M 27417
47,3
M 30468
53,1
M 36559
63,5
verz. blauDIN 7967
künftig ISO / EN
Stahl
Écrous'Pal
-
Abmessung VPE Preis €
6 1000 8,708 2000 8,3510 2000 11,3512 1000 16,1016 1000 22,5520 1000 35,9024 500 58,9030 200 102,80
Preise per 100 Stück
04 / 2019 Seite 263
Sicherungsmuttern
Self locking nuts
dsme
M 8133,515
M 10174
19,6
M 12194,5
21,9
M 14225
25,4
M 16245
27,7
M 20306
34,6
M 22326
36,9
M 24367
41,6
M 27417
47,3
M 30468
53,1
M 36559
63,5
tznDIN 7967
künftig ISO / EN
Stahl
Écrous'Pal
-
Abmessung VPE Preis €
10 100 18,6512 100 23,5516 100 32,1520 50 51,2524 50 99,2030 50 236,55
Seite 264 04 / 2019
Preise per 100 Stück
Sechskant-Blechschrauben
Hexagon head tapping screws
dks
2,91,5
5
3,52,35,5
3,92,3
7
4,22,8
7
4,838
5,548
6,34,810
8,05,813
verz. blauDIN 7976 C
künftig ISO / EN i01479
Stahl
Vis à tole à tête hexagonale
-
Abmessung VPE Preis €
C 2,2 x 9,5 5000 3,75C 2,9 x 6,5 2000 2,45C 2,9 x 9,5 2000 2,25C 2,9 x 16 2000 2,85C 3,5 x 6,5 2000 2,80C 3,5 x 8 2000 2,80C 3,5 x 9,5 2000 2,65C 3,5 x 13 2000 2,75C 3,5 x 16 2000 3,25C 3,5 x 19 2000 3,55C 3,5 x 22 2000 3,75C 3,5 x 25 2000 3,90C 3,5 x 32 1000 5,25C 3,5 x 38 1000 5,60C 3,9 x 6,5 1000 2,95C 3,9 x 8 1000 2,95C 3,9 x 9,5 1000 2,90C 3,9 x 13 1000 3,00C 3,9 x 16 1000 3,90C 3,9 x 19 1000 3,90C 3,9 x 22 1000 4,35C 3,9 x 25 1000 4,70C 3,9 x 32 1000 5,40C 3,9 x 38 1000 6,50C 3,9 x 45 500 7,75C 3,9 x 50 500 8,85C 4,2 x 8 1000 3,30C 4,2 x 9,5 1000 3,25C 4,2 x 13 1000 3,30C 4,2 x 16 1000 3,60C 4,2 x 19 1000 3,80C 4,2 x 22 1000 4,90C 4,2 x 25 1000 5,45C 4,2 x 32 500 6,25C 4,2 x 38 500 6,60C 4,2 x 45 500 7,00C 4,2 x 50 500 7,40C 4,2 x 60 500 8,45C 4,8 x 9,5 1000 4,40C 4,8 x 13 1000 4,45C 4,8 x 16 1000 4,75
Abmessung VPE Preis €
C 4,8 x 19 1000 5,30C 4,8 x 22 1000 6,75C 4,8 x 25 1000 7,05C 4,8 x 32 500 7,45C 4,8 x 38 500 9,35C 4,8 x 45 250 10,35C 4,8 x 50 250 10,85C 4,8 x 60 250 11,60C 4,8 x 70 250 12,55C 5,5 x 13 500 5,70C 5,5 x 16 500 6,05C 5,5 x 19 500 6,55C 5,5 x 22 500 8,00C 5,5 x 25 500 8,60C 5,5 x 32 500 9,95C 5,5 x 38 500 11,45C 5,5 x 45 250 12,85C 5,5 x 50 250 15,00C 5,5 x 60 250 19,15C 5,5 x 70 250 23,40C 6,3 x 13 500 7,60C 6,3 x 16 500 8,85C 6,3 x 19 500 8,75C 6,3 x 22 500 9,85C 6,3 x 25 500 10,55C 6,3 x 32 500 13,65C 6,3 x 38 250 15,00C 6,3 x 45 250 17,20C 6,3 x 50 250 19,65C 6,3 x 60 250 25,70C 6,3 x 70 250 30,85C 8 x 16 250 15,65C 8 x 19 250 16,75C 8 x 22 250 35,05C 8 x 25 200 18,75C 8 x 38 200 23,35C 8 x 45 200 25,85C 8 x 50 200 28,45
Preise per 100 Stück
04 / 2019 Seite 265
Sechskant-Blechschrauben
Hexagon head tapping screws
dks
2,91,5
5
3,52,35,5
3,92,3
7
4,22,8
7
4,838
5,548
6,34,810
8,05,813
blankDIN 7976 C
künftig ISO / EN i01479
A2
Vis à tole à tête hexagonale
-
Abmessung VPE Preis €
C 2,2 x 9,5 1000 5,30C 2,2 x 13 2000 6,00C 2,2 x 16 2000 6,35C 2,2 x 19 2000 7,05C 2,2 x 22 2000 8,45C 2,2 x 25 2000 9,30C 2,9 x 9,5 2000 5,10C 2,9 x 13 2000 5,80C 2,9 x 16 2000 6,15C 2,9 x 19 2000 6,85C 2,9 x 22 2000 8,45C 2,9 x 25 2000 9,40C 2,9 x 32 2000 11,70C 2,9 x 38 2000 13,20C 2,9 x 45 2000 17,10C 3,5 x 9,5 1000 6,30C 3,5 x 13 1000 6,45C 3,5 x 16 1000 6,85C 3,5 x 19 1000 7,60C 3,5 x 22 1000 9,05C 3,5 x 25 1000 10,30C 3,5 x 32 1000 12,45C 3,5 x 38 1000 13,70C 3,5 x 45 1000 15,65C 3,5 x 50 1000 20,00C 3,9 x 9,5 1000 7,40C 3,9 x 13 1000 7,35C 3,9 x 16 1000 7,70C 3,9 x 19 1000 7,95C 3,9 x 22 1000 10,25C 3,9 x 25 1000 11,40C 3,9 x 32 1000 13,30C 3,9 x 38 500 15,10C 3,9 x 45 500 17,05C 3,9 x 50 500 18,00C 3,9 x 60 500 19,95C 4,2 x 9,5 1000 8,15C 4,2 x 13 1000 7,95C 4,2 x 16 1000 8,30C 4,2 x 19 1000 9,05C 4,2 x 22 1000 11,50
Abmessung VPE Preis €
C 4,2 x 25 1000 11,90C 4,2 x 32 500 14,35C 4,2 x 38 500 16,40C 4,2 x 45 500 20,00C 4,2 x 50 200 23,40C 4,2 x 60 200 28,45C 4,2 x 70 200 33,55C 4,8 x 9,5 1000 10,60C 4,8 x 13 1000 10,05C 4,8 x 16 1000 10,95C 4,8 x 19 1000 11,55C 4,8 x 22 1000 12,85C 4,8 x 25 500 14,00C 4,8 x 32 500 17,55C 4,8 x 38 500 18,85C 4,8 x 45 200 24,30C 4,8 x 50 200 28,25C 4,8 x 60 200 34,95C 4,8 x 70 200 41,35C 4,8 x 80 200 47,80C 4,8 x 90 200 54,75C 4,8 x 100 200 68,20C 4,8 x 110 200 81,60C 4,8 x 120 200 97,60C 5,5 x 13 1000 15,85C 5,5 x 16 1000 16,40C 5,5 x 19 1000 17,65C 5,5 x 22 1000 20,10C 5,5 x 25 500 21,95C 5,5 x 32 500 24,95C 5,5 x 38 500 28,25C 5,5 x 45 200 32,05C 5,5 x 50 200 34,70C 5,5 x 60 200 42,65C 5,5 x 70 200 48,70C 5,5 x 80 200 54,25C 5,5 x 90 200 66,10C 5,5 x 100 200 80,60C 5,5 x 110 200 96,60C 5,5 x 120 200 116,20C 6,3 x 13 500 23,00
Abmessung VPE Preis €
C 6,3 x 16 500 23,00C 6,3 x 19 500 24,50C 6,3 x 22 500 27,75C 6,3 x 25 500 29,80C 6,3 x 32 500 33,05C 6,3 x 38 200 36,85C 6,3 x 45 200 41,05C 6,3 x 50 200 44,35C 6,3 x 60 200 52,70C 6,3 x 70 200 58,90C 6,3 x 80 200 65,10C 6,3 x 90 200 79,55C 6,3 x 100 200 96,05C 6,3 x 110 200 115,20C 6,3 x 120 200 137,40C 8 x 16 200 41,25C 8 x 19 200 43,50C 8 x 22 200 49,25C 8 x 25 200 54,25C 8 x 32 200 60,45C 8 x 38 200 67,65C 8 x 45 200 74,90C 8 x 50 200 79,55C 8 x 60 200 88,30C 8 x 70 200 98,15
Seite 266 04 / 2019
Preise per 100 Stück
Kegelstifte mit Gewindezapfen und konstanten Zapfe
Taper pins with thread and constant threaded part
d1 h10b min.a max.d2
5142,4M 5
6183
M 6
8224
M 8
10244,5
M 10
12275,3
M 12
14306
M 12
16356
M 16
20356
M 16
blankDIN 7977
künftig ISO / EN i08737
5.8
Goupilles coniques à bout fileté
-
Abmessung VPE Preis €
5 x 40 100 86,755 x 45 100 90,755 x 50 100 96,356 x 40 100 92,056 x 45 100 96,306 x 50 100 102,556 x 55 100 107,006 x 60 100 115,306 x 65 100 128,658 x 50 100 124,058 x 55 100 124,058 x 60 100 136,958 x 65 100 147,358 x 75 100 160,808 x 85 100 167,2510 x 50 100 156,4010 x 60 100 165,4510 x 65 100 173,3010 x 75 100 196,3010 x 85 100 211,5510 x 100 100 230,90
Preise per 100 Stück
04 / 2019 Seite 267
Kegelstifte mit Innengewinde
Taper pins with internal thread
d1 h10d2t1t2d
6M 4
6100,8
8M 5
8121
10M 610161,2
12M 812201,6
14M 812201,6
16M 10
16252,
20M 12
18272,5
blankDIN 7978 A
künftig ISO / EN i08736
5.8
Goupilles coniques, taraudées
-
Abmessung VPE Preis €
6 x 16 100 111,206 x 20 100 87,556 x 24 100 84,906 x 26 100 86,006 x 28 100 86,906 x 30 100 87,656 x 32 100 131,506 x 36 100 92,156 x 40 100 95,706 x 50 100 100,406 x 55 100 109,156 x 60 100 124,606 x 80 100 202,758 x 20 100 118,908 x 24 100 103,058 x 26 100 105,108 x 28 100 105,758 x 30 100 107,308 x 32 100 162,808 x 36 100 113,108 x 40 100 115,908 x 45 100 120,858 x 50 100 126,808 x 55 100 130,458 x 60 100 140,108 x 70 100 161,658 x 80 100 175,158 x 90 100 269,4510 x 28 100 167,3510 x 30 100 168,4010 x 32 100 171,1010 x 36 100 173,4510 x 40 100 176,8510 x 45 100 192,2010 x 50 100 201,1510 x 60 100 230,2510 x 70 100 239,1010 x 80 100 242,5010 x 90 100 316,6010 x 100 100 336,8010 x 120 100 390,70
Abmessung VPE Preis €
12 x 32 50 179,8512 x 36 50 185,9512 x 40 50 191,9012 x 50 50 207,4512 x 60 50 225,7012 x 70 50 245,2012 x 80 50 281,5512 x 90 50 382,6012 x 100 50 397,4512 x 120 50 376,5516 x 40 50 288,3016 x 50 50 323,3516 x 60 50 357,4016 x 70 50 370,5016 x 80 50 413,5016 x 90 50 445,0016 x 100 50 495,8016 x 120 50 591,40
Seite 268 04 / 2019
Preise per 100 Stück
Zylinderstifte mit Innengewinde gehärtet Tol. m6
Parallel pins with internal thread, hardened
d1d2t1t2
6M 4
610
8M 5
812
10M 61016
12M 61016
14M 81220
16M 8
1220
20M 10
1625
blankDIN 7979 D
künftig ISO / EN i08735
gehärtet
Goupilles cylindriques, taraudées
-
Abmessung VPE Preis €
4 m6 x 10 100 190,754 m6 x 12 100 190,754 m6 x 16 100 158,054 m6 x 18 100 158,054 m6 x 20 100 163,504 m6 x 20 IG=M2 100 163,504 m6 x 24 100 168,954 m6 x 28 100 179,854 m6 x 30 100 182,005 m6 x 10 100 90,155 m6 x 12 100 94,405 m6 x 14 100 96,805 m6 x 16 100 63,355 m6 x 18 100 65,305 m6 x 20 100 67,455 m6 x 24 100 70,855 m6 x 28 100 77,405 m6 x 30 100 81,555 m6 x 32 100 85,655 m6 x 36 100 92,755 m6 x 40 100 104,655 m6 x 50 100 126,905 m6 x 60 100 185,106 m6 x 12 100 94,406 m6 x 14 100 110,856 m6 x 16 100 60,606 m6 x 18 100 73,606 m6 x 20 100 53,656 m6 x 24 100 56,356 m6 x 28 100 60,406 m6 x 30 100 61,356 m6 x 32 100 63,856 m6 x 36 100 69,756 m6 x 40 100 73,806 m6 x 45 100 82,106 m6 x 50 100 87,306 m6 x 60 100 108,806 m6 x 70 100 151,308 m6 x 16 100 98,958 m6 x 18 100 67,708 m6 x 20 100 67,70
Abmessung VPE Preis €
8 m6 x 24 100 70,658 m6 x 28 100 74,258 m6 x 30 100 75,108 m6 x 32 100 80,108 m6 x 36 100 89,408 m6 x 40 100 92,008 m6 x 45 100 104,958 m6 x 50 100 108,908 m6 x 60 100 131,358 m6 x 70 100 168,608 m6 x 80 100 191,9510 m6 x 16 100 119,9010 m6 x 20 100 81,0010 m6 x 24 100 92,0010 m6 x 28 100 98,7510 m6 x 30 100 100,4010 m6 x 32 100 105,6010 m6 x 36 100 110,1010 m6 x 40 100 114,3510 m6 x 45 100 127,7510 m6 x 50 100 136,6010 m6 x 55 100 156,3010 m6 x 60 100 165,1510 m6 x 70 100 197,9510 m6 x 80 100 226,0510 m6 x 10 50 296,2512 m6 x 24 50 113,8012 m6 x 28 50 129,7012 m6 x 30 50 127,4012 m6 x 32 50 139,0012 m6 x 36 50 141,1512 m6 x 40 50 145,5012 m6 x 45 50 167,3012 m6 x 50 50 171,7012 m6 x 55 50 204,4012 m6 x 60 50 204,4012 m6 x 70 50 261,6012 m6 x 80 50 279,6012 m6 x 100 50 372,0012 m6 x 120 50 604,9514 m6 x 40 50 283,75
Abmessung VPE Preis €
14 m6 x 60 50 341,6014 m6 x 80 50 412,5514 m6 x 100 50 474,1516 m6 x 30 50 297,4516 m6 x 32 50 297,5516 m6 x 40 50 319,2516 m6 x 45 50 340,0016 m6 x 50 50 351,5516 m6 x 60 50 385,8516 m6 x 70 50 417,3516 m6 x 80 50 448,0016 m6 x 90 50 500,0016 m6 x 100 50 549,8020 m6 x 50 25 660,0020 m6 x 60 25 577,0020 m6 x 70 25 654,0020 m6 x 80 25 758,6520 m6 x 100 25 877,0020 m6 x 120 25 1875,00
Preise per 100 Stück
04 / 2019 Seite 269
Federringe für Zylinderschrauben
Single coil square section spring washers
Nenngrößed1 mind2sh min./max.
33,15,6
12/2,36
44,1
71,2
2,4/2,83
55,18,81,6
3,2/3,78
66,19,91,6
3,2/3,78
88,1
12,72
4/4,72
1010,2
162,5
5/5,9
1212,2
182,5
5/5,9
1414,221,1
36/7,1
1616,224,43,5
7/8,25
1818,226,43,5
7/8,25
2020,230,64,5
9/10,6
2222,532,94,5
9/10,6
2424,535,9
510/11,8
brüniertDIN 7980
künftig ISO / EN
Stahl
Rondelles grower pour vis à tête cylindrique
-
Abmessung VPE Preis €
d 3 1000 0,85d 4 1000 1,05d 5 1000 1,30d 6 1000 1,55d 8 1000 2,95d 10 1000 4,20d 12 500 4,95d 14 500 7,60d 16 250 11,10d 18 250 12,85d 20 50 24,40d 22 50 27,30d 24 50 34,55
Seite 270 04 / 2019
Preise per 100 Stück
Federringe für Zylinderschrauben
Single coil square section spring washers
Nenngrößed1 mind2sh min./max.
33,15,6
12/2,36
44,1
71,2
2,4/2,83
55,18,81,6
3,2/3,78
66,19,91,6
3,2/3,78
88,1
12,72
4/4,72
1010,2
162,5
5/5,9
1212,2
182,5
5/5,9
1414,221,1
36/7,1
1616,224,43,5
7/8,25
1818,226,43,5
7/8,25
2020,230,64,5
9/10,6
2222,532,94,5
9/10,6
2424,535,9
510/11,8
verz. blauDIN 7980
künftig ISO / EN
Stahl
Rondelles grower pour vis à tête cylindrique
-
Abmessung VPE Preis €
d 3 1000 0,95d 4 1000 1,25d 5 1000 1,70d 6 1000 1,90d 8 1000 3,80d 10 1000 5,80d 12 500 6,85d 14 500 10,65d 16 250 16,00d 18 250 18,30d 20 50 34,35d 22 50 38,90d 24 50 49,05
Preise per 100 Stück
04 / 2019 Seite 271
Federringe für Zylinderschrauben
Single coil square section spring washers
Nenngrößed1 mind2sh min./max.
33,15,6
12/2,36
44,1
71,2
2,4/2,83
55,18,81,6
3,2/3,78
66,19,91,6
3,2/3,78
88,1
12,72
4/4,72
1010,2
162,5
5/5,9
1212,2
182,5
5/5,9
1414,221,1
36/7,1
1616,224,43,5
7/8,25
1818,226,43,5
7/8,25
2020,230,64,5
9/10,6
2222,532,94,5
9/10,6
2424,535,9
510/11,8
blankDIN 7980
künftig ISO / EN
A2
Rondelles grower pour vis à tête cylindrique
-
Abmessung VPE Preis €
d 3 1000 0,90d 4 1000 1,35d 5 1000 1,95d 6 1000 2,55d 8 1000 4,75d 10 500 7,10d 12 500 10,60d 14 500 15,75d 16 200 21,95d 18 100 25,85d 20 100 37,70d 24 100 48,30d 27 100 63,00
Seite 272 04 / 2019
Preise per 100 Stück
Linsen-Blechschrauben mit Kreuzschlitz Form C
Cross recessed pan head tapping screws
ddkk max.k min.
2,24,21,8
1,55
2,95,62,2
1,95
3,56,92,6
2,35
3,97,52,8
2,55
4,28,2
3,052,75
4,89,5
3,553,25
5,510,83,953,65
6,312,54,554,25
verz. blauDIN 7981 C
künftig ISO / EN i07049
Stahl
Vis à tôle à tête fraisée bombée avec empreinte cr
-
Abmessung VPE Preis €
C-H 2,2 x 4,5 2000 5,55C-H 2,2 x 6,5 2000 3,70C-H 2,2 x 8 2000 3,70C-H 2,2 x 9,5 2000 3,50C-H 2,2 x 13 2000 3,25C-H 2,2 x 16 2000 3,40C-H 2,2 x 19 2000 4,60C-H 2,2 x 22 2000 4,60C-H 2,2 x 25 2000 4,60C-H 2,9 x 4,5 2000 3,05C-H 2,9 x 6,5 2000 2,05C-H 2,9 x 8 2000 2,05C-H 2,9 x 9,5 2000 1,90C-H 2,9 x 13 2000 2,00C-H 2,9 x 16 2000 2,05C-H 2,9 x 19 2000 2,45C-H 2,9 x 22 2000 2,85C-H 2,9 x 25 2000 3,25C-H 2,9 x 32 2000 3,90C-H 2,9 x 38 1000 5,50C-H 3,5 x 6,5 2000 2,40C-H 3,5 x 8 2000 2,40C-H 3,5 x 9,5 2000 2,25C-H 3,5 x 13 2000 2,40C-H 3,5 x 16 2000 2,45C-H 3,5 x 19 2000 2,65C-H 3,5 x 22 2000 3,15C-H 3,5 x 25 2000 3,25C-H 3,5 x 32 1000 4,35C-H 3,5 x 38 1000 4,85C-H 3,5 x 50 1000 7,60C-H 3,9 x 6,5 1000 2,55C-H 3,9 x 8 1000 2,55C-H 3,9 x 9,5 1000 2,55C-H 3,9 x 13 1000 2,65C-H 3,9 x 16 1000 2,95C-H 3,9 x 19 1000 3,00C-H 3,9 x 22 1000 3,60C-H 3,9 x 25 1000 3,90C-H 3,9 x 32 1000 4,95C-H 3,9 x 38 1000 5,35
Abmessung VPE Preis €
C-H 3,9 x 45 500 6,10C-H 3,9 x 50 500 10,85C-H 4,2 x 8 1000 2,80C-H 4,2 x 9,5 1000 2,80C-H 4,2 x 13 1000 2,85C-H 4,2 x 16 1000 3,15C-H 4,2 x 19 1000 3,30C-H 4,2 x 22 1000 4,10C-H 4,2 x 25 1000 4,60C-H 4,2 x 32 500 5,25C-H 4,2 x 38 500 6,00C-H 4,2 x 45 500 6,90C-H 4,2 x 50 500 7,90C-H 4,2 x 60 500 13,40C-H 4,2 x 70 500 22,90C-H 4,8 x 9,5 1000 4,25C-H 4,8 x 13 1000 4,00C-H 4,8 x 16 1000 4,20C-H 4,8 x 19 1000 4,70C-H 4,8 x 22 1000 5,05C-H 4,8 x 25 1000 5,95C-H 4,8 x 32 500 6,85C-H 4,8 x 38 500 7,90C-H 4,8 x 45 250 8,60C-H 4,8 x 50 250 9,60C-H 4,8 x 60 250 15,35C-H 4,8 x 70 250 20,05C-H 4,8 x 80 250 24,70C-H 4,8 x 90 250 37,80C-H 4,8 x 100 250 45,80C-H 4,8 x 120 100 63,10C-H 5,5 x 13 500 5,35C-H 5,5 x 16 500 5,80C-H 5,5 x 19 500 6,05C-H 5,5 x 22 500 6,90C-H 5,5 x 25 500 7,40C-H 5,5 x 32 500 8,50C-H 5,5 x 38 500 9,70C-H 5,5 x 45 250 10,95C-H 5,5 x 50 250 12,65C-H 5,5 x 60 250 24,05
Abmessung VPE Preis €
C-H 5,5 x 70 250 29,70C-H 5,5 x 80 250 50,10C-H 6,3 x 13 500 7,65C-H 6,3 x 16 500 7,65C-H 6,3 x 19 500 8,05C-H 6,3 x 22 500 9,60C-H 6,3 x 25 500 10,35C-H 6,3 x 32 250 11,65C-H 6,3 x 38 250 12,75C-H 6,3 x 45 250 14,65C-H 6,3 x 50 250 16,90C-H 6,3 x 60 250 29,70C-H 6,3 x 70 250 38,80C-H 8 x 19 250 17,30C-H 8 x 22 250 18,30C-H 8 x 25 200 19,50C-H 8 x 32 200 22,20C-H 8 x 38 200 24,30C-H 8 x 45 200 27,00C-H 8 x 50 200 29,75
Preise per 100 Stück
04 / 2019 Seite 273
Linsen-Blechschrauben mit Kreuzschlitz Form C
Cross recessed pan head tapping screws
ddkk max.k min.m
2,95,62,2
1,953
3,56,92,6
2,354,2
3,97,52,8
2,554,4
4,28,2
3,052,754,6
4,89,5
3,553,25
5
5,510,83,953,656,5
6,312,54,554,257,1
blankDIN 7981 C
künftig ISO / EN i07049
A2
Vis à tôle à tête fraisée bombée avec empreinte cr
-
Abmessung VPE Preis €
C-H 2,2 x 4,5 1000 4,70C-H 2,2 x 6,5 1000 4,70C-H 2,2 x 9,5 1000 4,20C-H 2,2 x 13 1000 4,65C-H 2,2 x 16 1000 5,05C-H 2,2 x 19 1000 5,55C-H 2,2 x 22 1000 6,85C-H 2,2 x 25 1000 7,65C-H 2,9 x 6,5 1000 3,00C-H 2,9 x 9,5 1000 2,50C-H 2,9 x 13 1000 2,80C-H 2,9 x 16 1000 3,00C-H 2,9 x 19 1000 3,30C-H 2,9 x 22 1000 4,40C-H 2,9 x 25 1000 4,90C-H 3,5 x 6,5 1000 4,25C-H 3,5 x 9,5 1000 2,95C-H 3,5 x 13 1000 2,85C-H 3,5 x 16 1000 3,00C-H 3,5 x 19 1000 3,35C-H 3,5 x 22 1000 4,05C-H 3,5 x 25 1000 4,45C-H 3,5 x 32 1000 5,90C-H 3,5 x 38 1000 7,20C-H 3,9 x 9,5 1000 3,50C-H 3,9 x 13 1000 3,25C-H 3,9 x 16 1000 3,40C-H 3,9 x 19 1000 3,55C-H 3,9 x 22 1000 4,55C-H 3,9 x 25 1000 5,05C-H 3,9 x 32 1000 6,15C-H 3,9 x 38 500 7,45C-H 3,9 x 45 500 8,95C-H 3,9 x 50 500 9,70C-H 4,2 x 9,5 1000 3,85C-H 4,2 x 13 1000 3,55C-H 4,2 x 16 1000 3,65C-H 4,2 x 19 1000 4,05C-H 4,2 x 22 1000 5,10C-H 4,2 x 25 1000 5,30C-H 4,2 x 32 500 6,10
Abmessung VPE Preis €
C-H 4,2 x 38 500 7,90C-H 4,2 x 45 500 10,55C-H 4,2 x 50 200 12,20C-H 4,8 x 9,5 1000 5,45C-H 4,8 x 13 1000 4,45C-H 4,8 x 16 1000 4,85C-H 4,8 x 19 1000 5,15C-H 4,8 x 22 1000 5,70C-H 4,8 x 25 500 6,20C-H 4,8 x 32 500 7,70C-H 4,8 x 38 500 9,20C-H 4,8 x 45 200 12,85C-H 4,8 x 50 200 14,80C-H 4,8 x 60 200 18,30C-H 4,8 x 70 200 21,65C-H 4,8 x 80 200 25,00C-H 5,5 x 13 1000 7,75C-H 5,5 x 16 1000 8,60C-H 5,5 x 19 1000 9,20C-H 5,5 x 22 1000 10,55C-H 5,5 x 25 500 11,55C-H 5,5 x 32 500 13,10C-H 5,5 x 38 500 14,80C-H 5,5 x 45 200 16,80C-H 5,5 x 50 200 18,20C-H 5,5 x 60 200 22,30C-H 5,5 x 70 200 25,50C-H 5,5 x 80 200 28,55C-H 6,3 x 13 500 10,80C-H 6,3 x 16 500 11,30C-H 6,3 x 19 500 12,10C-H 6,3 x 22 500 13,65C-H 6,3 x 25 200 14,70C-H 6,3 x 32 200 16,30C-H 6,3 x 38 200 18,10C-H 6,3 x 45 200 20,20C-H 6,3 x 50 200 21,75C-H 6,3 x 60 200 27,80C-H 6,3 x 70 200 30,95C-H 6,3 x 80 200 31,55
Seite 274 04 / 2019
Preise per 100 Stück
Linsen-Blechschrauben mit TX
Cross recessed pan head tapping screws
ddkk max.k min.TX-Nr.:
2,24,21,8
1,558
2,95,62,2
1,9510
3,56,92,6
2,3515
3,97,52,8
2,5520
4,28,2
3,052,75
20
4,89,5
3,553,25
25
5,510,83,953,65
25
6,312,54,554,25
30
verz. blauDIN 7981 C
künftig ISO / EN i07049
Stahl
Vis à tôle à tête fraisée bombée avec empreinte cr
-
Abmessung VPE Preis €
C-T 2,2 x 4,5 2000 5,55C-T 2,2 x 6,5 2000 3,70C-T 2,2 x 8 2000 3,70C-T 2,2 x 9,5 2000 3,50C-T 2,2 x 13 2000 3,25C-T 2,2 x 16 2000 3,40C-T 2,2 x 19 2000 4,60C-T 2,2 x 22 2000 4,60C-T 2,2 x 25 2000 4,60C-T 2,9 x 4,5 2000 3,05C-T 2,9 x 6,5 2000 2,05C-T 2,9 x 8 2000 2,05C-T 2,9 x 9,5 2000 1,90C-T 2,9 x 13 2000 2,00C-T 2,9 x 16 2000 2,05C-T 2,9 x 19 2000 2,45C-T 2,9 x 22 2000 2,85C-T 2,9 x 25 2000 3,25C-T 2,9 x 32 2000 3,90C-T 2,9 x 38 1000 5,50C-T 3,5 x 6,5 2000 2,40C-T 3,5 x 8 2000 2,40C-T 3,5 x 9,5 2000 2,25C-T 3,5 x 13 2000 2,40C-T 3,5 x 16 2000 2,45C-T 3,5 x 19 2000 2,65C-T 3,5 x 22 2000 3,15C-T 3,5 x 25 2000 3,25C-T 3,5 x 32 1000 4,35C-T 3,5 x 38 1000 4,85C-T 3,5 x 50 1000 7,60C-T 3,9 x 6,5 1000 2,55C-T 3,9 x 8 1000 2,55C-T 3,9 x 9,5 1000 2,55C-T 3,9 x 13 1000 2,65C-T 3,9 x 16 1000 2,95C-T 3,9 x 19 1000 3,00C-T 3,9 x 22 1000 3,60C-T 3,9 x 25 1000 3,90C-T 3,9 x 32 1000 4,95C-T 3,9 x 38 1000 5,35
Abmessung VPE Preis €
C-T 3,9 x 45 500 6,10C-T 3,9 x 50 500 10,85C-T 4,2 x 8 1000 2,80C-T 4,2 x 9,5 1000 2,80C-T 4,2 x 13 1000 2,85C-T 4,2 x 16 1000 3,15C-T 4,2 x 19 1000 3,30C-T 4,2 x 22 1000 4,10C-T 4,2 x 25 1000 4,60C-T 4,2 x 32 500 5,25C-T 4,2 x 38 500 6,00C-T 4,2 x 45 500 6,90C-T 4,2 x 50 500 7,90C-T 4,2 x 60 500 13,40C-T 4,2 x 70 500 22,90C-T 4,8 x 9,5 1000 4,25C-T 4,8 x 13 1000 4,00C-T 4,8 x 16 1000 4,20C-T 4,8 x 19 1000 4,70C-T 4,8 x 22 1000 5,05C-T 4,8 x 25 1000 5,95C-T 4,8 x 32 500 6,85C-T 4,8 x 38 500 7,90C-T 4,8 x 45 250 8,60C-T 4,8 x 50 250 9,60C-T 4,8 x 60 250 15,35C-T 4,8 x 70 250 20,05C-T 4,8 x 80 250 24,70C-T 4,8 x 90 250 37,80C-T 4,8 x 100 250 45,80C-T 4,8 x 120 250 63,10C-T 5,5 x 13 500 5,35C-T 5,5 x 16 500 5,80C-T 5,5 x 19 500 6,05C-T 5,5 x 22 500 6,90C-T 5,5 x 25 500 7,40C-T 5,5 x 32 500 8,50C-T 5,5 x 38 500 9,70C-T 5,5 x 45 250 10,95C-T 5,5 x 50 250 12,65C-T 5,5 x 60 250 24,05
Abmessung VPE Preis €
C-T 5,5 x 70 250 29,70C-T 5,5 x 80 250 50,10C-T 6,3 x 13 500 7,65C-T 6,3 x 16 500 7,65C-T 6,3 x 19 500 8,05C-T 6,3 x 22 500 9,60C-T 6,3 x 25 500 10,35C-T 6,3 x 32 250 11,65C-T 6,3 x 38 250 12,75C-T 6,3 x 45 250 14,65C-T 6,3 x 50 250 16,90C-T 6,3 x 60 250 29,70C-T 6,3 x 70 250 38,80C-T 8 x 19 250 17,30C-T 8 x 22 250 18,30C-T 8 x 25 200 19,50C-T 8 x 32 200 22,20C-T 8 x 38 200 24,30C-T 8 x 45 200 27,00C-T 8 x 50 200 29,75
Preise per 100 Stück
04 / 2019 Seite 275
Linsen-Blechschrauben mit TX-Antrieb
Cross recessed pan head tapping screws
ddkk max.k min.TX-Nr.:
2,95,62,2
1,9510
3,56,92,6
2,3515
3,97,52,8
2,5520
4,28,2
3,052,75
20
4,89,5
3,553,25
25
5,510,83,953,65
25
6,312,54,554,25
30
blankDIN 7981 C
künftig ISO / EN i07049
A2
Vis à tôle à tête fraisée bombée
-
Abmessung VPE Preis €
C-T 2,2 x 4,5 1000 4,70C-T 2,2 x 6,5 1000 4,70C-T 2,2 x 9,5 1000 4,20C-T 2,2 x 13 1000 4,65C-T 2,2 x 16 1000 5,05C-T 2,2 x 19 1000 5,55C-T 2,2 x 22 1000 6,85C-T 2,2 x 25 1000 7,65C-T 2,9 x 6,5 1000 3,00C-T 2,9 x 9,5 1000 2,50C-T 2,9 x 13 1000 2,80C-T 2,9 x 16 1000 3,00C-T 2,9 x 19 1000 3,30C-T 2,9 x 22 1000 4,40C-T 2,9 x 25 1000 4,90C-T 3,5 x 6,5 1000 4,25C-T 3,5 x 9,5 1000 2,95C-T 3,5 x 13 1000 2,85C-T 3,5 x 16 1000 3,00C-T 3,5 x 19 1000 3,35C-T 3,5 x 22 1000 4,05C-T 3,5 x 25 1000 4,45C-T 3,5 x 32 1000 5,90C-T 3,5 x 38 1000 7,20C-T 3,9 x 9,5 1000 3,50C-T 3,9 x 13 1000 3,25C-T 3,9 x 16 1000 3,40C-T 3,9 x 19 1000 3,55C-T 3,9 x 22 1000 4,55C-T 3,9 x 25 1000 5,05C-T 3,9 x 32 1000 6,15C-T 3,9 x 38 500 7,45C-T 3,9 x 45 500 8,95C-T 3,9 x 50 500 9,70C-T 4,2 x 9,5 1000 3,85C-T 4,2 x 13 1000 3,55C-T 4,2 x 16 1000 3,65C-T 4,2 x 19 1000 4,05C-T 4,2 x 22 1000 5,10C-T 4,2 x 25 1000 5,30C-T 4,2 x 32 500 6,10
Abmessung VPE Preis €
C-T 4,2 x 38 500 7,90C-T 4,2 x 45 500 10,55C-T 4,2 x 50 200 12,20C-T 4,8 x 9,5 1000 5,45C-T 4,8 x 13 1000 4,45C-T 4,8 x 16 1000 4,85C-T 4,8 x 19 1000 5,15C-T 4,8 x 22 1000 5,70C-T 4,8 x 25 500 6,20C-T 4,8 x 32 500 7,70C-T 4,8 x 38 500 9,20C-T 4,8 x 45 200 12,85C-T 4,8 x 50 200 14,80C-T 4,8 x 60 200 18,30C-T 4,8 x 70 200 21,65C-T 4,8 x 80 200 25,00C-T 5,5 x 13 1000 7,75C-T 5,5 x 16 1000 8,60C-T 5,5 x 19 1000 9,20C-T 5,5 x 22 1000 10,55C-T 5,5 x 25 500 11,55C-T 5,5 x 32 500 13,10C-T 5,5 x 38 500 14,80C-T 5,5 x 45 200 16,80C-T 5,5 x 50 200 18,20C-T 5,5 x 60 200 22,30C-T 5,5 x 70 200 25,50C-T 5,5 x 80 200 28,55C-T 6,3 x 13 500 10,80C-T 6,3 x 16 500 11,30C-T 6,3 x 19 500 12,10C-T 6,3 x 22 500 13,65C-T 6,3 x 25 200 14,70C-T 6,3 x 32 200 16,30C-T 6,3 x 38 200 18,10C-T 6,3 x 45 200 20,20C-T 6,3 x 50 200 21,75C-T 6,3 x 60 200 27,80C-T 6,3 x 70 200 30,95C-T 6,3 x 80 200 31,55
Seite 276 04 / 2019
Preise per 100 Stück
Senk-Blechschrauben mit Kreuzschlitz
Cross recessed countersunk head tapping screws
ddkk
2,24,31,3
2,95,51,7
3,56,82,1
3,97,52,3
4,28,12,5
4,89,5
3
5,510,83,4
6,312,43,8
verz. blauDIN 7982 C
künftig ISO / EN i07050
Stahl
Vis à tole à tête fraisée avec empreinte cruciform
-
Abmessung VPE Preis €
C-H 2,2 x 6,5 2000 3,70C-H 2,2 x 8 2000 3,70C-H 2,2 x 9,5 2000 3,50C-H 2,2 x 13 2000 3,25C-H 2,2 x 16 2000 3,40C-H 2,2 x 19 2000 4,60C-H 2,9 x 6,5 2000 2,05C-H 2,9 x 9,5 2000 1,90C-H 2,9 x 13 2000 2,00C-H 2,9 x 16 2000 2,05C-H 2,9 x 19 2000 2,45C-H 2,9 x 25 2000 3,25C-H 3,5 x 6,5 2000 2,40C-H 3,5 x 9,5 2000 2,25C-H 3,5 x 13 2000 2,40C-H 3,5 x 16 2000 2,45C-H 3,5 x 19 2000 2,65C-H 3,5 x 22 2000 3,15C-H 3,5 x 25 2000 3,25C-H 3,5 x 38 1000 4,85C-H 3,9 x 9,5 1000 2,55C-H 3,9 x 13 1000 2,65C-H 3,9 x 16 1000 2,95C-H 3,9 x 19 1000 3,00C-H 3,9 x 22 1000 3,60C-H 3,9 x 25 1000 3,90C-H 3,9 x 32 1000 4,95C-H 3,9 x 38 500 5,35C-H 3,9 x 45 500 6,10C-H 3,9 x 50 500 10,85C-H 4,2 x 13 1000 2,85C-H 4,2 x 16 1000 3,15C-H 4,2 x 19 1000 3,30C-H 4,2 x 22 1000 4,10C-H 4,2 x 25 1000 4,60C-H 4,2 x 32 500 5,25C-H 4,2 x 38 500 6,00C-H 4,2 x 45 500 6,90C-H 4,2 x 50 500 7,90C-H 4,2 x 60 500 13,40C-H 4,2 x 70 500 22,55
Abmessung VPE Preis €
C-H 4,8 x 9,5 1000 6,10C-H 4,8 x 13 1000 4,00C-H 4,8 x 16 1000 4,20C-H 4,8 x 19 1000 4,70C-H 4,8 x 22 1000 5,05C-H 4,8 x 25 1000 5,95C-H 4,8 x 32 500 6,85C-H 4,8 x 38 500 7,90C-H 4,8 x 45 250 8,60C-H 4,8 x 50 250 9,60C-H 4,8 x 60 250 15,35C-H 4,8 x 70 250 20,05C-H 4,8 x 80 250 32,20C-H 4,8 x 90 250 37,80C-H 4,8 x 100 250 50,20C-H 4,8 x 120 100 57,40C-H 5,5 x 13 500 5,35C-H 5,5 x 16 500 5,80C-H 5,5 x 19 500 6,05C-H 5,5 x 25 500 7,40C-H 5,5 x 32 500 8,50C-H 5,5 x 45 250 10,95C-H 6,3 x 13 500 7,65C-H 6,3 x 16 500 7,65C-H 6,3 x 19 500 8,05C-H 6,3 x 22 500 9,60C-H 6,3 x 25 500 10,35C-H 6,3 x 32 250 12,75C-H 6,3 x 38 250 12,75C-H 6,3 x 45 250 14,65C-H 6,3 x 50 250 16,90C-H 6,3 x 60 250 29,70C-H 8 x 19 250 17,30C-H 8 x 22 250 18,30C-H 8 x 25 200 19,50C-H 8 x 32 200 22,20C-H 8 x 38 200 24,30C-H 8 x 45 200 27,00C-H 8 x 50 200 29,75
Preise per 100 Stück
04 / 2019 Seite 277
Senk-Blechschrauben mit Kreuzschlitz
Cross recessed countersunk head tapping screws
ddkkm
2,95,51,7
3
3,56,82,14,2
3,97,52,34,6
4,28,12,54,7
4,89,5
35,1
5,510,83,46,8
6,312,43,87,1
blankDIN 7982 C
künftig ISO / EN i07050
A2
Vis à tole à tête fraisée avec empreinte cruciform
-
Abmessung VPE Preis €
C-H 2,2 x 6,5 1000 4,70C-H 2,2 x 9,5 1000 4,20C-H 2,2 x 13 1000 4,65C-H 2,2 x 16 1000 4,65C-H 2,2 x 19 1000 5,55C-H 2,2 x 22 1000 6,85C-H 2,2 x 25 1000 7,65C-H 2,9 x 6,5 1000 3,00C-H 2,9 x 9,5 1000 2,50C-H 2,9 x 13 1000 2,80C-H 2,9 x 16 1000 3,00C-H 2,9 x 19 1000 3,30C-H 2,9 x 22 1000 4,40C-H 2,9 x 25 1000 4,90C-H 3,5 x 6,5 1000 4,25C-H 3,5 x 9,5 1000 2,95C-H 3,5 x 13 1000 2,85C-H 3,5 x 16 1000 3,00C-H 3,5 x 19 1000 3,35C-H 3,5 x 22 1000 4,05C-H 3,5 x 25 1000 4,45C-H 3,5 x 32 1000 5,90C-H 3,5 x 38 1000 7,20C-H 3,9 x 9,5 1000 3,50C-H 3,9 x 13 1000 3,25C-H 3,9 x 16 1000 3,40C-H 3,9 x 19 1000 3,55C-H 3,9 x 22 1000 4,55C-H 3,9 x 25 1000 5,05C-H 3,9 x 32 1000 6,15C-H 3,9 x 38 500 7,45C-H 3,9 x 45 500 8,95C-H 3,9 x 50 500 9,70C-H 4,2 x 9,5 1000 3,85C-H 4,2 x 13 1000 3,55C-H 4,2 x 16 1000 3,65C-H 4,2 x 19 1000 4,05C-H 4,2 x 22 1000 5,10C-H 4,2 x 25 1000 5,30C-H 4,2 x 32 500 6,10C-H 4,2 x 38 500 7,90
Abmessung VPE Preis €
C-H 4,2 x 45 500 10,55C-H 4,2 x 50 500 12,20C-H 4,8 x 9,5 1000 5,45C-H 4,8 x 13 1000 4,45C-H 4,8 x 16 1000 4,85C-H 4,8 x 19 1000 5,15C-H 4,8 x 22 1000 5,70C-H 4,8 x 25 500 6,20C-H 4,8 x 32 500 7,70C-H 4,8 x 38 500 9,20C-H 4,8 x 45 200 12,85C-H 4,8 x 50 200 14,80C-H 4,8 x 60 200 18,30C-H 4,8 x 70 200 21,65C-H 4,8 x 80 200 25,00C-H 5,5 x 13 1000 7,75C-H 5,5 x 16 1000 8,60C-H 5,5 x 19 1000 9,20C-H 5,5 x 22 1000 10,55C-H 5,5 x 25 500 11,55C-H 5,5 x 32 500 13,10C-H 5,5 x 38 500 14,80C-H 5,5 x 45 200 16,80C-H 5,5 x 50 200 18,20C-H 5,5 x 60 200 22,30C-H 5,5 x 70 200 25,50C-H 5,5 x 80 200 28,55C-H 6,3 x 13 500 10,80C-H 6,3 x 16 500 11,30C-H 6,3 x 19 500 12,10C-H 6,3 x 22 500 13,65C-H 6,3 x 25 200 14,70C-H 6,3 x 32 200 16,30C-H 6,3 x 38 200 18,10C-H 6,3 x 45 200 20,20C-H 6,3 x 50 200 21,75C-H 6,3 x 60 200 27,80C-H 6,3 x 70 200 30,95C-H 6,3 x 80 200 31,55
Seite 278 04 / 2019
Preise per 100 Stück
Senk-Blechschrauben mit Kreuzschlitz
Cross recessed countersunk head tapping screws
ddkkTX-Nr.:
2,24,31,3
8
2,95,51,710
3,56,82,115
3,97,52,320
4,28,12,520
4,89,5
325
5,510,83,425
6,312,43,830
verz. blauDIN 7982 C
künftig ISO / EN i07050
Stahl
Vis à tole à tête fraisée avec empreinte cruciform
-
Abmessung VPE Preis €
C-T 2,2 x 6,5 2000 3,70C-T 2,2 x 8 2000 3,70C-T 2,2 x 9,5 2000 3,50C-T 2,2 x 13 2000 3,25C-T 2,2 x 16 2000 3,40C-T 2,2 x 19 2000 4,60C-T 2,2 x 22 2000 4,60C-T 2,2 x 25 2000 4,60C-T 2,9 x 6,5 2000 2,05C-T 2,9 x 8 2000 2,05C-T 2,9 x 9,5 2000 1,90C-T 2,9 x 13 2000 2,00C-T 2,9 x 16 2000 2,05C-T 2,9 x 19 2000 2,45C-T 2,9 x 22 2000 2,85C-T 2,9 x 25 2000 3,25C-T 2,9 x 32 2000 3,90C-T 3,5 x 6,5 2000 2,40C-T 3,5 x 8 2000 2,40C-T 3,5 x 9,5 2000 2,25C-T 3,5 x 13 2000 2,40C-T 3,5 x 16 2000 2,45C-T 3,5 x 19 2000 2,65C-T 3,5 x 22 2000 3,15C-T 3,5 x 25 2000 3,25C-T 3,5 x 32 1000 4,35C-T 3,5 x 38 1000 4,85C-T 3,9 x 9,5 1000 2,55C-T 3,9 x 13 1000 2,65C-T 3,9 x 16 1000 2,95C-T 3,9 x 19 1000 3,00C-T 3,9 x 22 1000 3,60C-T 3,9 x 25 1000 3,90C-T 3,9 x 32 1000 4,95C-T 3,9 x 38 500 5,35C-T 3,9 x 45 500 6,10C-T 3,9 x 50 500 10,85C-T 4,2 x 9,5 1000 2,80C-T 4,2 x 13 1000 2,85C-T 4,2 x 16 1000 3,15C-T 4,2 x 19 1000 3,30
Abmessung VPE Preis €
C-T 4,2 x 22 1000 4,10C-T 4,2 x 25 1000 4,60C-T 4,2 x 32 500 5,25C-T 4,2 x 38 500 6,00C-T 4,2 x 45 500 6,90C-T 4,2 x 50 500 7,90C-T 4,2 x 60 500 13,40C-T 4,2 x 70 500 22,55C-T 4,8 x 9,5 1000 6,10C-T 4,8 x 13 1000 4,00C-T 4,8 x 16 1000 4,20C-T 4,8 x 19 1000 4,70C-T 4,8 x 22 1000 5,05C-T 4,8 x 25 1000 5,95C-T 4,8 x 32 500 6,85C-T 4,8 x 38 500 7,90C-T 4,8 x 45 250 8,60C-T 4,8 x 50 250 9,60C-T 4,8 x 60 250 15,35C-T 4,8 x 70 250 20,05C-T 4,8 x 80 250 32,20C-T 4,8 x 90 250 37,80C-T 4,8 x 100 250 50,20C-T 4,8 x 120 100 57,40C-T 5,5 x 13 500 5,35C-T 5,5 x 16 500 5,80C-T 5,5 x 19 500 6,05C-T 5,5 x 22 500 6,90C-T 5,5 x 25 500 7,40C-T 5,5 x 32 500 8,50C-T 5,5 x 38 500 9,70C-T 5,5 x 45 250 10,95C-T 5,5 x 50 250 12,65C-T 5,5 x 60 250 24,05C-T 5,5 x 70 250 29,70C-T 6,3 x 13 500 7,65C-T 6,3 x 16 500 7,65C-T 6,3 x 19 500 8,05C-T 6,3 x 22 500 9,60C-T 6,3 x 25 500 10,35C-T 6,3 x 32 250 11,65
Abmessung VPE Preis €
C-T 6,3 x 38 250 12,75C-T 6,3 x 45 250 14,65C-T 6,3 x 50 250 16,90C-T 6,3 x 60 250 29,70C-T 6,3 x 70 250 38,80
Preise per 100 Stück
04 / 2019 Seite 279
Senk-Blechschrauben mit Kreuzschlitz
Cross recessed countersunk head tapping screws
ddkkTX-Nr.:
2,95,51,710
3,56,82,115
3,97,52,320
4,28,12,520
4,89,5
325
5,510,83,425
6,312,43,830
blankDIN 7982 C
künftig ISO / EN i07050
A2
Vis à tole à tête fraisée avec empreinte cruciform
-
Abmessung VPE Preis €
C-T 2,2 x 6,5 1000 4,70C-T 2,2 x 9,5 1000 4,20C-T 2,2 x 13 1000 4,65C-T 2,2 x 16 1000 4,65C-T 2,2 x 19 1000 5,55C-T 2,2 x 22 1000 6,85C-T 2,2 x 25 1000 7,65C-T 2,9 x 6,5 1000 3,00C-T 2,9 x 9,5 1000 2,50C-T 2,9 x 13 1000 2,80C-T 2,9 x 16 1000 3,00C-T 2,9 x 19 1000 3,30C-T 2,9 x 22 1000 4,40C-T 2,9 x 25 1000 4,90C-T 2,9 x 32 1000 1,90C-T 3,5 x 6,5 1000 4,25C-T 3,5 x 9,5 1000 2,95C-T 3,5 x 13 1000 2,85C-T 3,5 x 16 1000 3,00C-T 3,5 x 19 1000 3,35C-T 3,5 x 22 1000 4,05C-T 3,5 x 25 1000 4,45C-T 3,5 x 32 1000 5,90C-T 3,5 x 38 1000 7,20C-T 3,9 x 6,5 1000 3,55C-T 3,9 x 9,5 1000 3,50C-T 3,9 x 13 1000 3,25C-T 3,9 x 16 1000 3,40C-T 3,9 x 19 1000 3,55C-T 3,9 x 22 1000 4,55C-T 3,9 x 25 1000 5,05C-T 3,9 x 32 1000 6,15C-T 3,9 x 38 500 7,45C-T 3,9 x 45 500 8,95C-T 3,9 x 50 500 9,70C-T 4,2 x 9,5 1000 3,85C-T 4,2 x 13 1000 3,55C-T 4,2 x 16 1000 3,65C-T 4,2 x 19 1000 4,05C-T 4,2 x 22 1000 5,10C-T 4,2 x 25 1000 5,30
Abmessung VPE Preis €
C-T 4,2 x 32 500 6,10C-T 4,2 x 38 500 7,90C-T 4,2 x 45 500 10,55C-T 4,2 x 50 200 12,20C-T 4,8 x 9,5 1000 5,45C-T 4,8 x 13 1000 4,45C-T 4,8 x 16 1000 4,85C-T 4,8 x 19 1000 5,15C-T 4,8 x 22 1000 5,70C-T 4,8 x 25 500 6,20C-T 4,8 x 32 500 7,70C-T 4,8 x 38 500 9,20C-T 4,8 x 45 200 12,85C-T 4,8 x 50 200 14,80C-T 4,8 x 60 200 18,30C-T 4,8 x 70 200 21,65C-T 4,8 x 80 200 25,00C-T 5,5 x 13 1000 7,75C-T 5,5 x 16 1000 8,60C-T 5,5 x 19 1000 9,20C-T 5,5 x 22 1000 10,55C-T 5,5 x 25 500 11,55C-T 5,5 x 32 500 13,10C-T 5,5 x 38 500 14,80C-T 5,5 x 45 200 16,80C-T 5,5 x 50 200 18,20C-T 5,5 x 60 200 22,30C-T 5,5 x 70 200 25,50C-T 5,5 x 80 200 28,55C-T 6,3 x 13 500 10,80C-T 6,3 x 16 500 11,30C-T 6,3 x 19 500 12,10C-T 6,3 x 22 500 13,65C-T 6,3 x 25 200 14,70C-T 6,3 x 32 200 16,30C-T 6,3 x 38 200 18,10C-T 6,3 x 45 200 20,20C-T 6,3 x 50 200 21,75C-T 6,3 x 60 200 27,80C-T 6,3 x 70 200 30,95C-T 6,3 x 80 200 31,55
Seite 280 04 / 2019
Preise per 100 Stück
Linsensenk-Blechschrauben mit Kreuzschlitz
Cross recessed raised countersunk head tapping scr
ddkk max.k min.
2,24,30,71,3
2,95,50,91,7
3,56,81,22,1
3,97,51,32,3
4,28,11,42,5
4,89,51,5
3
5,510,81,73,4
6,312,4
23,8
verz. blauDIN 7983 C
künftig ISO / EN i07051
Stahl
Vis à tôle à tête conique-bombée avec empreinte cr
-
Abmessung VPE Preis €
C-H 2,2 x 6,5 2000 3,70C-H 2,2 x 8 2000 3,70C-H 2,2 x 9,5 2000 3,50C-H 2,2 x 13 2000 3,25C-H 2,2 x 16 2000 3,40C-H 2,2 x 19 2000 4,60C-H 2,2 x 22 2000 4,60C-H 2,2 x 25 2000 4,60C-H 2,2 x 32 2000 6,85C-H 2,9 x 6,5 2000 2,05C-H 2,9 x 8 2000 2,05C-H 2,9 x 9,5 2000 1,90C-H 2,9 x 13 2000 2,00C-H 2,9 x 16 2000 2,05C-H 2,9 x 19 1000 2,45C-H 2,9 x 22 1000 2,85C-H 2,9 x 25 1000 3,25C-H 3,5 x 6,5 2000 2,40C-H 3,5 x 8 2000 2,40C-H 3,5 x 9,5 2000 2,25C-H 3,5 x 13 2000 2,40C-H 3,5 x 16 2000 2,45C-H 3,5 x 19 2000 2,65C-H 3,5 x 22 2000 3,15C-H 3,5 x 25 2000 3,25C-H 3,5 x 32 1000 4,35C-H 3,5 x 38 1000 4,85C-H 3,9 x 9,5 1000 2,55C-H 3,9 x 13 1000 2,65C-H 3,9 x 16 1000 2,95C-H 3,9 x 19 1000 3,00C-H 3,9 x 22 1000 3,60C-H 3,9 x 25 1000 3,90C-H 3,9 x 32 1000 4,95C-H 3,9 x 38 1000 5,35C-H 3,9 x 45 500 6,10C-H 3,9 x 50 500 10,85C-H 4,2 x 9,5 1000 2,80C-H 4,2 x 13 1000 2,85C-H 4,2 x 16 1000 3,15C-H 4,2 x 19 1000 3,30
Abmessung VPE Preis €
C-H 4,2 x 22 1000 4,10C-H 4,2 x 25 1000 4,60C-H 4,2 x 32 500 5,25C-H 4,2 x 38 500 6,00C-H 4,2 x 45 500 6,90C-H 4,2 x 50 500 7,90C-H 4,2 x 60 500 13,40C-H 4,8 x 9,5 1000 3,90C-H 4,8 x 13 1000 4,00C-H 4,8 x 16 1000 4,20C-H 4,8 x 19 1000 4,70C-H 4,8 x 22 1000 5,05C-H 4,8 x 25 1000 5,95C-H 4,8 x 32 500 6,85C-H 4,8 x 38 500 7,90C-H 4,8 x 45 250 8,60C-H 4,8 x 50 250 9,60C-H 4,8 x 60 250 15,35C-H 4,8 x 70 250 20,05C-H 4,8 x 80 250 24,75C-H 5,5 x 13 500 5,35C-H 5,5 x 16 500 5,80C-H 5,5 x 19 500 6,05C-H 5,5 x 22 500 6,90C-H 5,5 x 25 500 7,40C-H 5,5 x 32 500 8,50C-H 5,5 x 38 500 9,70C-H 5,5 x 45 250 10,95C-H 5,5 x 50 250 12,65C-H 5,5 x 60 250 24,05C-H 5,5 x 70 250 29,70C-H 6,3 x 13 500 7,65C-H 6,3 x 16 500 7,65C-H 6,3 x 19 500 8,05C-H 6,3 x 22 500 9,60C-H 6,3 x 25 500 10,35C-H 6,3 x 32 250 11,65C-H 6,3 x 38 250 12,75C-H 6,3 x 45 250 14,65C-H 6,3 x 50 250 16,90C-H 6,3 x 60 250 29,70
Preise per 100 Stück
04 / 2019 Seite 281
Linsensenk-Blechschrauben mit Kreuzschlitz
Cross recessed raised countersunk head tapping scr
ddkfkm
2,95,50,91,73,4
3,56,81,22,14,6
3,97,51,32,34,7
4,28,11,42,54,9
4,89,51,5
35,4
5,510,81,73,4
7
6,312,4
23,87,4
blankDIN 7983 C
künftig ISO / EN i07051
A2
Vis à tôle à tête conique-bombée avec empreinte cr
-
Abmessung VPE Preis €
C-H 2,2 x 6,5 1000 4,70C-H 2,2 x 9,5 1000 4,20C-H 2,2 x 13 1000 4,65C-H 2,2 x 16 1000 5,05C-H 2,2 x 19 1000 5,55C-H 2,2 x 22 1000 6,85C-H 2,2 x 25 1000 7,65C-H 2,9 x 6,5 1000 3,00C-H 2,9 x 9,5 1000 2,50C-H 2,9 x 13 1000 2,80C-H 2,9 x 16 1000 3,00C-H 2,9 x 19 1000 3,30C-H 2,9 x 22 1000 4,40C-H 2,9 x 25 1000 4,90C-H 3,5 x 6,5 1000 4,25C-H 3,5 x 9,5 1000 2,95C-H 3,5 x 13 1000 2,85C-H 3,5 x 16 1000 3,00C-H 3,5 x 19 1000 3,30C-H 3,5 x 22 1000 4,05C-H 3,5 x 25 1000 4,45C-H 3,5 x 32 1000 5,90C-H 3,5 x 38 1000 7,20C-H 3,9 x 9,5 1000 3,50C-H 3,9 x 13 1000 3,25C-H 3,9 x 16 1000 3,40C-H 3,9 x 19 1000 3,55C-H 3,9 x 22 1000 4,55C-H 3,9 x 25 1000 5,05C-H 3,9 x 32 1000 6,15C-H 3,9 x 38 500 7,45C-H 3,9 x 45 500 8,95C-H 3,9 x 50 500 9,70C-H 4,2 x 9,5 1000 3,85C-H 4,2 x 13 1000 3,55C-H 4,2 x 16 1000 3,65C-H 4,2 x 19 1000 4,05C-H 4,2 x 22 1000 5,10C-H 4,2 x 25 1000 5,30C-H 4,2 x 32 500 6,10C-H 4,2 x 38 500 7,90
Abmessung VPE Preis €
C-H 4,2 x 45 500 10,55C-H 4,2 x 50 200 12,20C-H 4,8 x 9,5 1000 5,45C-H 4,8 x 13 1000 4,45C-H 4,8 x 16 1000 4,85C-H 4,8 x 19 1000 5,15C-H 4,8 x 22 1000 5,70C-H 4,8 x 25 500 6,20C-H 4,8 x 32 500 7,70C-H 4,8 x 38 500 9,20C-H 4,8 x 45 200 12,85C-H 4,8 x 50 200 14,80C-H 4,8 x 60 200 18,30C-H 4,8 x 70 200 21,65C-H 4,8 x 80 200 25,00C-H 5,5 x 13 1000 7,75C-H 5,5 x 16 1000 8,60C-H 5,5 x 19 1000 9,20C-H 5,5 x 22 1000 10,55C-H 5,5 x 25 500 11,55C-H 5,5 x 32 500 13,10C-H 5,5 x 38 500 14,80C-H 5,5 x 45 200 16,80C-H 5,5 x 50 200 18,20C-H 5,5 x 60 200 22,30C-H 5,5 x 70 200 25,50C-H 5,5 x 80 200 28,55C-H 6,3 x 13 500 10,80C-H 6,3 x 16 500 11,30C-H 6,3 x 19 500 12,10C-H 6,3 x 22 500 13,65C-H 6,3 x 25 200 14,70C-H 6,3 x 32 200 16,30C-H 6,3 x 38 200 18,10C-H 6,3 x 45 200 20,20C-H 6,3 x 50 200 21,75C-H 6,3 x 60 200 27,80C-H 6,3 x 70 200 30,95C-H 6,3 x 80 200 31,55
Seite 282 04 / 2019
Preise per 100 Stück
Zylinderschrauben mit Innensechskant und niedrigem
Hexagon socked head cap screws with low head
db1b2-ks
M 325
-22
M 438
-2,82,5
M 538
-3,5
3
M 6182844
M 8223255
M 10263667
M 12304478
M 1638529
12
M 2046
-1114
brüniertDIN 7984
künftig ISO / EN
8.8
Vis à tête cylindrique à trou six-pans, tête basse
-
Abmessung VPE Preis €
3 x 5 500 8,703 x 6 500 4,503 x 8 500 4,103 x 10 500 4,003 x 12 500 4,003 x 16 500 5,703 x 18 500 5,503 x 20 500 10,103 x 25 500 20,503 x 30 500 22,004 x 6 500 3,304 x 8 500 5,104 x 10 500 5,304 x 12 500 5,504 x 14 500 15,504 x 16 500 5,704 x 18 500 11,304 x 20 500 7,404 x 25 500 8,504 x 30 500 9,904 x 35 500 11,604 x 40 500 24,604 x 45 500 27,504 x 50 500 30,305 x 6 500 11,705 x 8 500 5,305 x 10 500 5,505 x 12 500 6,105 x 14 500 6,505 x 16 500 6,205 x 20 500 7,305 x 25 500 8,705 x 30 500 9,905 x 35 200 13,605 x 40 200 15,405 x 45 200 17,805 x 50 200 19,105 x 55 200 61,405 x 60 200 68,206 x 8 500 7,606 x 10 500 7,30
Abmessung VPE Preis €
6 x 12 500 6,906 x 16 500 8,006 x 18 500 10,106 x 20 500 8,806 x 22 500 12,906 x 25 500 10,106 x 30 500 12,006 x 35 200 14,306 x 40 200 17,406 x 45 200 18,006 x 50 200 21,606 x 55 200 35,506 x 60 200 30,906 x 70 200 51,506 x 80 200 66,706 x 90 100 78,406 x 100 100 90,208 x 10 200 14,108 x 12 200 13,508 x 14 200 19,008 x 16 200 13,908 x 18 200 19,008 x 20 200 14,908 x 22 200 22,708 x 25 200 17,308 x 30 200 19,608 x 35 200 28,608 x 40 200 30,808 x 45 200 33,608 x 50 200 35,908 x 55 200 43,908 x 60 200 48,208 x 65 200 58,608 x 70 200 58,708 x 80 200 73,808 x 90 100 121,308 x 100 100 147,008 x 110 200 159,5010 x 12 200 41,3010 x 16 200 25,4010 x 18 200 50,10
Abmessung VPE Preis €
10 x 20 200 26,4010 x 25 200 29,6010 x 30 200 32,8010 x 35 200 33,7010 x 40 100 39,8010 x 45 100 49,5010 x 50 100 55,0010 x 55 100 58,4010 x 60 100 68,2010 x 65 100 91,4010 x 70 100 85,8010 x 80 100 89,4010 x 90 100 178,9010 x 100 100 198,0012 x 20 100 47,4012 x 25 100 40,7012 x 30 100 50,7012 x 35 100 55,0012 x 40 100 60,7012 x 45 100 66,0012 x 50 100 67,3012 x 55 100 79,1012 x 60 100 94,8012 x 70 50 111,8012 x 80 50 160,8012 x 90 50 212,6012 x 100 50 289,1012 x 110 100 361,1016 x 25 50 235,0016 x 30 50 102,1016 x 35 50 132,7016 x 40 50 146,0016 x 45 50 169,1016 x 50 50 181,5016 x 55 50 194,8016 x 60 50 250,1016 x 65 50 304,7016 x 70 25 284,4016 x 80 25 319,6016 x 90 25 370,4016 x 100 25 413,50
Preise per 100 Stück
04 / 2019 Seite 283
Zylinderschrauben mit Innensechskant und niedrigem
Hexagon socked head cap screws with low head
db1b2-ks
M 325
-22
M 438
-2,82,5
M 538
-3,5
3
M 6182844
M 8223255
M 10263667
M 12304478
M 1638529
12
M 2046
-1114
brüniertDIN 7984
künftig ISO / EN
8.8
Vis à tête cylindrique à trou six-pans, tête basse
-
Abmessung VPE Preis €
16 x 110 50 769,0020 x 30 50 543,1020 x 35 50 486,6020 x 40 25 312,8020 x 45 25 396,1020 x 50 25 405,6020 x 55 25 466,2020 x 60 25 498,5020 x 70 25 528,0020 x 80 10 621,0020 x 90 10 626,3020 x 100 10 648,5020 x 110 10 1208,1020 x 120 10 1314,6024 x 50 25 1079,0024 x 55 25 1426,5024 x 60 25 1430,0024 x 70 25 1485,0024 x 80 25 1540,0024 x 90 10 1675,7024 x 100 10 2090,8024 x 110 10 2145,0024 x 120 10 2200,00
Seite 284 04 / 2019
Preise per 100 Stück
Zylinderschrauben mit Innensechskant und niedrigem
Hexagon socked head cap screws with low head
db1b2-ks
M 312
-22
M 414
-2,82,5
M 516
-3,5
3
M 6182844
M 8223255
M 10263667
M 12304478
M 1638529
12
M 2046
-1114
verz. blauDIN 7984
künftig ISO / EN
8.8
Vis à tête cylindrique à trou six-pans, tête basse
-
Abmessung VPE Preis €
3 x 5 500 3,503 x 6 500 3,103 x 8 500 2,803 x 10 500 3,403 x 12 500 5,603 x 16 500 6,103 x 18 500 6,403 x 20 500 6,603 x 25 500 7,204 x 6 500 4,404 x 8 500 5,104 x 10 500 5,304 x 12 500 5,504 x 14 500 5,504 x 16 500 5,504 x 18 500 10,304 x 20 500 7,404 x 25 500 8,904 x 30 500 9,704 x 35 500 10,004 x 40 500 26,004 x 50 500 40,905 x 6 500 9,805 x 8 500 6,105 x 10 500 5,505 x 12 500 6,105 x 14 500 7,805 x 16 500 6,805 x 20 500 7,205 x 25 500 9,805 x 30 500 11,105 x 35 200 17,405 x 40 200 18,705 x 45 200 20,805 x 50 200 24,505 x 60 200 74,106 x 8 500 7,506 x 10 500 6,706 x 12 500 8,306 x 14 500 8,906 x 16 500 8,30
Abmessung VPE Preis €
6 x 18 500 10,806 x 20 500 8,606 x 22 500 13,606 x 25 500 10,806 x 30 500 14,706 x 35 200 16,206 x 40 200 18,506 x 45 200 22,006 x 50 200 26,406 x 55 200 32,206 x 60 200 35,106 x 70 200 59,406 x 80 200 73,006 x 90 100 81,506 x100 100 96,308 x 10 200 16,608 x 12 200 14,508 x 14 200 16,208 x 16 200 14,108 x 18 200 18,408 x 20 200 15,108 x 22 200 25,908 x 25 200 18,708 x 30 200 20,408 x 35 200 25,308 x 40 200 26,508 x 45 200 33,408 x 50 200 34,508 x 55 200 44,908 x 60 200 48,508 x 70 200 72,608 x 80 200 93,808 x 90 100 151,708 x 100 100 184,6010 x 16 200 24,5010 x 18 200 40,0010 x 20 200 25,4010 x 25 200 28,6010 x 30 200 32,0010 x 35 200 41,1010 x 40 100 46,10
Abmessung VPE Preis €
10 x 45 100 50,3010 x 50 100 52,9010 x 55 100 74,1010 x 60 100 58,3010 x 70 100 116,9010 x 80 100 132,0010 x 90 100 158,2010 x 100 100 201,1010 x 110 100 357,6010 x 120 100 241,8012 x 20 100 49,5012 x 25 100 44,7012 x 30 100 54,9012 x 35 100 59,2012 x 40 100 62,2012 x 45 100 72,6012 x 50 100 88,0012 x 55 100 93,5012 x 60 100 102,2012 x 70 50 156,4012 x 80 50 158,5012 x 90 50 200,0012 x 100 50 253,0016 x 20 50 267,1016 x 25 50 228,0016 x 30 50 105,6016 x 35 50 153,5016 x 40 50 156,2016 x 45 50 158,4016 x 50 50 161,6016 x 55 50 252,6016 x 60 50 279,6016 x 70 25 289,2016 x 80 25 396,3016 x 90 25 451,0016 x 100 25 484,00
Preise per 100 Stück
04 / 2019 Seite 285
Zylinderschrauben mit Innensechskant und niedrigem
Hexagon socked head cap screws with low head
db1b2-ks
M 312
-22
M 414
-2,82,5
M 516
-3,5
3
M 6182844
M 8223255
M 10263667
M 12304478
M 1638529
12
M 2046
-1114
blankDIN 7984
künftig ISO / EN
A2
Vis à tête cylindrique à trou six-pans, tête basse
-
Abmessung VPE Preis €
3 x 6 1000 27,903 x 8 1000 25,053 x 10 1000 19,653 x 12 1000 19,653 x 16 1000 17,853 x 20 1000 18,853 x 25 1000 20,153 x 30 1000 25,303 x 35 500 27,903 x 40 500 30,754 x 6 1000 41,854 x 8 1000 34,604 x 10 1000 25,304 x 12 1000 25,304 x 16 1000 17,854 x 20 500 18,854 x 25 500 20,154 x 30 500 25,304 x 35 200 27,904 x 40 200 30,755 x 6 500 25,305 x 8 500 25,305 x 10 500 25,305 x 12 500 25,305 x 16 500 19,905 x 20 500 21,205 x 25 200 22,505 x 30 200 26,355 x 35 200 29,205 x 40 200 31,755 x 45 200 37,205 x 50 200 42,355 x 55 200 56,805 x 60 100 62,006 x 8 500 38,756 x 10 500 31,506 x 12 500 31,506 x 16 200 25,056 x 20 200 27,156 x 25 200 28,406 x 30 200 31,00
Abmessung VPE Preis €
6 x 35 200 35,006 x 40 200 38,506 x 45 100 46,506 x 50 100 51,156 x 55 100 64,556 x 60 100 69,758 x 10 500 56,308 x 12 500 56,308 x 16 200 50,658 x 20 200 43,408 x 25 100 43,408 x 30 100 43,408 x 35 100 48,808 x 40 100 53,458 x 45 100 62,508 x 50 100 70,258 x 55 100 82,658 x 60 100 91,4510 x 16 100 102,2510 x 20 100 87,8010 x 25 100 82,6510 x 30 100 90,4010 x 35 100 94,5510 x 40 100 101,2510 x 45 100 118,8010 x 50 50 126,5510 x 55 50 146,7010 x 60 50 154,9512 x 20 50 134,0012 x 25 50 125,0012 x 30 50 127,0012 x 35 50 135,0012 x 50 50 176,0012 x 60 50 209,0012 x 70 50 258,00
Seite 286 04 / 2019
Preise per 100 Stück
Linsenschrauben mit PH-Kreuzschlitz
Cross recessed raised cheese head screws
ddkkKreuzschlitz-nr.
M 36
2,41
M 48
3,12
M 5103,8
2
M 6124,6
3
M 81664
verz. blauDIN 7985
künftig ISO / EN i07045
4.8
Vis à tête cylindrique large à empreinte cruciform
-
Abmessung VPE Preis €
2 x 4 2000 3,802 x 5 2000 4,702 x 6 2000 3,152 x 8 2000 1,952 x 10 2000 1,952 x 12 2000 2,202 x 16 2000 2,402,5 x 4 2000 3,802,5 x 5 2000 4,702,5 x 6 2000 3,152,5 x 8 2000 1,952,5 x 10 2000 1,952,5 x 12 2000 2,202,5 x 16 2000 2,402,5 x 20 2000 2,403 x 4 2000 3,803 x 5 2000 4,753 x 6 2000 3,153 x 8 2000 2,003 x 10 2000 2,003 x 12 2000 2,203 x 16 2000 2,403 x 18 2000 2,903 x 20 2000 2,453 x 25 2000 3,303 x 30 2000 3,803 x 35 1000 4,853 x 40 1000 5,103 x 45 1000 7,753 x 50 1000 8,754 x 5 2000 7,954 x 6 2000 4,604 x 8 2000 2,954 x 10 2000 2,954 x 12 2000 3,054 x 16 2000 3,454 x 18 2000 3,604 x 20 2000 3,604 x 25 1000 3,904 x 30 1000 5,254 x 35 1000 6,05
Abmessung VPE Preis €
4 x 40 1000 6,404 x 45 1000 7,954 x 50 500 11,604 x 60 500 13,204 x 70 500 17,304 x 80 500 22,155 x 6 2000 8,205 x 8 2000 4,105 x 10 2000 4,255 x 12 1000 4,355 x 16 1000 4,855 x 18 1000 5,105 x 20 1000 5,255 x 25 1000 6,005 x 30 1000 7,155 x 35 1000 8,105 x 40 500 8,305 x 45 500 10,055 x 50 500 11,405 x 60 500 14,055 x 70 500 17,755 x 80 500 22,656 x 8 1000 11,456 x 10 1000 6,256 x 12 1000 6,056 x 16 1000 6,856 x 18 1000 7,006 x 20 1000 7,056 x 25 500 7,906 x 30 500 9,256 x 35 500 11,106 x 40 500 11,156 x 45 500 11,656 x 50 200 13,206 x 60 200 16,456 x 70 200 24,156 x 80 200 25,358 x 12 500 25,108 x 16 500 11,658 x 18 500 13,208 x 20 500 12,35
Abmessung VPE Preis €
8 x 25 500 13,358 x 30 200 14,608 x 35 200 16,308 x 40 200 18,608 x 45 200 20,158 x 50 200 21,108 x 60 200 24,108 x 70 200 29,258 x 80 200 37,40
Preise per 100 Stück
04 / 2019 Seite 287
Linsenschrauben mit PH-Kreuzschlitz
Cross recessed raised cheese head screws
d1d2k
M 24
1,6
M 2,552
M 36
2,4
M 48
3,1
M 5103,8
M 6124,6
blankDIN 7985
künftig ISO / EN i07045
A2
Vis à tête cylindrique large à empreinte cruciform
-
Abmessung VPE Preis €
2 x 4 1000 4,452 x 5 1000 4,252 x 6 1000 3,852 x 8 1000 3,852 x 10 1000 3,952 x 12 1000 4,202 x 16 1000 5,302,5 x 4 1000 4,452,5 x 5 1000 4,252,5 x 6 1000 3,952,5 x 8 1000 4,102,5 x 10 1000 4,352,5 x 12 1000 4,652,5 x 16 1000 5,303 x 4 500 4,603 x 5 500 4,303 x 6 500 3,953 x 8 500 3,653 x 10 500 3,503 x 12 500 3,853 x 14 500 5,603 x 16 500 4,503 x 18 500 6,203 x 20 500 5,003 x 22 500 7,853 x 25 500 6,303 x 30 500 8,953 x 35 500 13,903 x 40 500 15,053 x 45 200 17,554 x 5 500 7,004 x 6 500 6,204 x 8 500 5,704 x 10 500 5,154 x 12 500 5,004 x 14 500 7,154 x 16 500 5,754 x 18 500 8,154 x 20 500 6,504 x 22 500 8,954 x 25 500 7,20
Abmessung VPE Preis €
4 x 30 500 9,754 x 35 500 15,654 x 40 500 16,554 x 45 500 29,454 x 50 500 29,455 x 6 500 11,055 x 8 500 8,655 x 10 500 7,305 x 12 500 7,505 x 14 500 10,405 x 16 500 8,355 x 18 500 10,955 x 20 500 8,805 x 22 500 12,705 x 25 500 10,155 x 30 500 12,005 x 35 500 14,855 x 40 500 19,355 x 45 200 23,305 x 50 200 30,505 x 60 200 35,156 x 8 500 13,306 x 10 500 12,306 x 12 500 10,656 x 16 500 11,606 x 20 500 13,306 x 25 200 14,706 x 30 200 18,156 x 35 200 19,456 x 40 200 22,556 x 45 200 26,706 x 50 200 35,256 x 60 200 43,206 x 70 100 51,156 x 80 100 58,908 x 12 200 29,958 x 16 200 27,908 x 20 200 30,258 x 25 200 32,308 x 30 200 37,458 x 35 200 43,40
Abmessung VPE Preis €
8 x 40 200 48,058 x 45 200 67,158 x 50 200 67,158 x 60 100 92,95
Seite 288 04 / 2019
Preise per 100 Stück
Scheiben für Stahlkonstruktionen
Washeres for steel constructions
d1d2
1121
1424
1830
2237
2439
2644
3050
3356
3660
3966
verz. blauDIN 7989
künftig ISO / EN
Stahl
Rondelles plates
-
Abmessung VPE Preis €
11 200 19,1514 200 23,5518 200 32,3522 200 41,6526 200 50,0033 200 100,45
Preise per 100 Stück
04 / 2019 Seite 289
Scheiben für Stahlkonstruktionen
Washeres for steel constructions
d1d2
1121
1424
1830
2237
2439
2644
3050
3356
3660
3966
tznDIN 7989
künftig ISO / EN
Stahl
Rondelles plates
-
Abmessung VPE Preis €
11 200 22,2514 200 27,2518 200 38,0522 200 50,5026 200 72,1533 200 120,85
Seite 290 04 / 2019
Preise per 100 Stück
Sechskantschrauben mit Sechskantmuttern für Stahlk
Hexagon bolts and nuts for steel constructions
dbks
M 1219,5
819
M 16231024
M 20261330
M 22281432
M 2429,5
1536
M 2732,5
1741
M 30351946
tznDIN 7990
künftig ISO / EN
4.8
Boulons à tête hexagonale avec écrous à six-pans
-
Abmessung VPE Preis €
12 x 30 100 42,0512 x 35 100 43,8512 x 40 100 46,2512 x 45 100 50,0012 x 50 100 54,1012 x 55 100 65,0512 x 60 100 117,6012 x 65 50 128,4516 x 35 50 85,9016 x 40 50 87,2516 x 45 50 90,7516 x 50 50 98,2016 x 55 50 103,0516 x 60 50 107,8516 x 65 25 121,6016 x 70 25 125,0016 x 80 25 228,7516 x 90 25 252,1016 x 100 25 268,8016 x 110 25 289,8516 x 120 25 320,3516 x 130 25 358,1016 x 140 25 376,7020 x 40 25 173,8020 x 45 25 174,6020 x 50 25 177,2520 x 55 25 184,1020 x 60 25 188,4020 x 65 25 200,0520 x 70 25 203,3520 x 75 25 216,5520 x 80 25 224,7520 x 90 25 396,6020 x 95 25 324,8520 x 100 25 415,2524 x 50 25 308,6524 x 55 25 307,2524 x 60 25 312,8024 x 65 25 318,9024 x 70 25 324,4024 x 75 25 352,60
Abmessung VPE Preis €
24 x 80 25 369,8024 x 90 10 624,8524 x 100 10 706,6524 x 110 10 767,0524 x 120 10 797,95
Preise per 100 Stück
04 / 2019 Seite 291
Re-Coil Gewindeeinsatz Edelstahl
blankDIN 8140
künftig ISO / EN
A2-
Abmessung VPE Preis €
2,5 x 2,5 100 21,952,5 x 3,8 100 22,102,5 x 5 100 17,602,5 x 6,3 100 18,452,5 x 7,5 100 20,853 x 3 100 12,203 x 4,5 100 12,953 x 6 100 13,903 x 7,5 100 14,503 x 9 100 16,404 x 4 100 11,904 x 6 100 11,404 x 8 100 13,104 x 10 100 15,654 x 12 100 18,405 x 5 100 12,505 x 7,5 100 12,955 x 10 100 14,105 x 12,5 100 16,405 x 15 100 18,206 x 6 100 23,006 x 9 100 14,256 x 12 100 17,506 x 15 100 21,906 x 18 100 24,558 x 8 100 15,808 x 12 100 21,508 x 16 100 25,708 x 20 100 30,758 x 24 100 36,6510 x 10 100 20,7510 x 15 100 29,6010 x 20 100 37,4510 x 25 100 43,3510 x 30 100 51,0512 x 12 100 34,8512 x 18 100 49,8512 x 24 100 62,0012 x 30 100 86,3012 x 36 100 105,2514 x 1,5 x 14 50 45,10
Abmessung VPE Preis €
16 x 16 50 57,4016 x 24 50 83,0016 x 32 50 104,0016 x 40 50 159,2016 x 48 50 257,9020 x 20 25 129,2020 x 30 25 168,1020 x 40 25 261,4020 x 50 25 351,5020 x 60 25 416,80
Seite 292 04 / 2019
Preise per 100 Stück
Re-Coil Reparatursatz
blankDIN 8140
künftig ISO / EN
Stahl-
Abmessung VPE Preis €
2,5 x 3,8 Set 1 19,903 x 4,5 Set 1 19,604 x 6 Set 1 19,605 x 7,5 Set 1 19,906 x 9 Set 1 19,908 x 12 Set 1 26,508 x 1 x 12 Set 1 28,2010 x 15 Set 1 28,3012 x 18 Set 1 33,5014 x 1,5 x 21 Set 1 37,0016 x 24 Set 1 46,9020 x 30 Set 1 77,5024 x 36 Set 1 104,00
Preise per Stück
04 / 2019 Seite 293
Scheiben
Washers
d 1d 2s
3,29
0,8
4,3121
5,3151,2
6,4181,6
7,4222
8,4242
10,5302,5
13373
15443
17503
20564
22604
verz. blauDIN 9021
künftig ISO / EN i07093
HV140
Rondelles plates
-
Abmessung VPE Preis €
d 3,2 1000 0,75d 4,3 1000 1,15d 4,3 200 1,80d 5,3 1000 2,20d 6,4 1000 2,80d 8,4 500 5,70d 10,5 200 9,95d 13 100 20,60d 15 100 26,70d 17 100 30,85d 20 50 65,35d 22 50 66,95d 26 50 120,00
Seite 294 04 / 2019
Preise per 100 Stück
Scheiben
Washers
d1d2s
3,29
0,8
4,3121
5,3151,2
6,4181,6
8,4242
10,5302,5
13,0373
15,0443
17,0503
20,0564
22,0604
blankDIN 9021
künftig ISO / EN i07093
A2
Rondelles plates
-
Abmessung VPE Preis €
d 2,2 1000 2,55d 2,7 1000 2,55d 3,2 1000 3,00d 3,7 1000 3,65d 4,3 1000 1,50d 5,3 1000 3,10d 6,4 1000 3,95d 7,4 500 20,65d 8,4 500 10,90d 10,5 500 17,30d 13 200 36,15d 15 100 54,75d 17 100 55,55d 20 50 90,00d 22 50 118,80
Preise per 100 Stück
04 / 2019 Seite 295
Verbindungsmuttern (Distanzmuttern), rund
Connecting nut, round
d1d2
M 58
M 610
M 811
M 1013
M 1215
verz. blauDIN Muffe
künftig ISO / EN
Stahl
Ecrou d'assemblage, ronde
-
Abmessung VPE Preis €
4 x 15 200 16,104 x 20 200 18,005 x 20 200 16,305 x 25 200 18,406 x 10 200 12,106 x 15 200 13,606 x 20 100 15,606 x 25 100 16,906 x 30 100 19,606 x 35 100 25,006 x 40 100 26,708 x 15 200 15,608 x 20 100 16,908 x 25 100 18,208 x 30 100 20,208 x 40 100 30,0010 x 20 100 22,0010 x 30 100 28,1010 x 40 100 39,0010 x 50 100 60,6010 x 60 100 74,5012 x 30 100 40,7012 x 40 100 53,1012 x 60 100 106,2016 x 80 25 308,90
Seite 296 04 / 2019
Preise per 100 Stück
Verbindungsmuttern (Distanzmuttern), Sechskant
Connecting nut, hexagon
d1Sw
M 58
M 610
M 811
M 1017
M 1217
M 1622
verz. blauDIN Muffe
künftig ISO / EN
Stahl
Ecrou d'assemblage, hexagonale
-
Abmessung VPE Preis €
5 x 10 SW 8 200 12,005 x 20 SW 8 200 14,306 x 20 SW 10 100 18,406 x 25 SW 10 100 19,606 x 30 SW 10 100 23,006 x 35 SW 10 100 28,706 x 40 SW 10 100 31,308 x 20 SW 13 100 32,208 x 25 SW 13 100 39,808 x 30 SW 11 100 30,908 x 30 SW 13 100 46,208 x 50 SW 11 100 46,3010 x 20 SW 13 100 31,3010 x 30 SW 13 100 39,6010 x 40 SW 17 50 90,8010 x 50 SW 13 50 64,7010 x 60 SW 17 25 140,0010 x 70 SW 17 25 164,7012 x 40 SW 19 50 116,3012 x 50 SW 19 25 146,0012 x 70 SW 19 25 202,20
Preise per 100 Stück
04 / 2019 Seite 297
Scheiben rund für HV-Verbindungen in Stahlkonstruktionen 14399-06
Washers for high-tensile structural bolting/Fricti
d1d2s
12243
16304
20374
22394
24444
27505
30565
36666
tznEN-ISO 14399
künftig ISO / EN
HV300
Rondelles plates pour construction en acier
-
Abmessung VPE Preis €
12 400 16,7016 200 26,4020 200 34,1023 200 41,8524 100 47,6527 100 86,8530 50 192,0536 50 260,80
Seite 298 04 / 2019
Preise per 100 Stück
Sechskantmuttern mit großen Schlüsselweiten für HV Verbindungen 14399-04
Hexagon nuts with large with across flats/Friction
dsme
M 122210
23,91
M 162713
29,56
M 203216
35,03
M 223618
39,55
M 244119
45,20
M 274622
50,85
M 305024
55,37
M 366029
66,44
tznEN-ISO 14399
künftig ISO / EN
10.9
Ecrous hexagonaux pour assemblages HR
-
Abmessung VPE Preis €
12 200 41,4016 100 62,7020 100 101,9022 100 129,0524 50 175,6027 50 268,7030 50 401,6536 1 1147,75
Preise per 100 Stück
04 / 2019 Seite 299
Sechskantschrauben mit großen Schlüsselweiten für HV Verbindungen 14399-04
Hexagon bolts with large width across flats/Fricti
dskb 1/2
M 12228
21/23
M 162710
26/28
M 203213
31/33
M 223614
32/34
M 244115
34/37
M 274617
37/39
M 305019
40/42
M 366023
48/50
tznEN-ISO 14399
künftig ISO / EN
10.9
Boulons pour assemblages HV
-
Abmessung VPE Preis €
12 x 30 100 78,1512 x 35 100 86,8512 x 40 100 89,4012 x 45 100 94,3012 x 50 100 99,9512 x 55 100 106,7012 x 60 50 112,5012 x 65 50 137,8012 x 70 50 145,5012 x 75 50 301,7012 x 80 50 301,7012 x 85 50 447,2512 x 90 50 448,2012 x 95 50 522,8512 x 100 50 523,8512 x 120 50 759,0016 x 35 50 142,5516 x 40 50 143,5516 x 45 50 154,2516 x 50 50 164,9016 x 55 50 173,6516 x 60 50 181,4016 x 65 50 190,1016 x 70 50 201,7516 x 75 50 212,4516 x 80 50 219,2016 x 85 25 244,5016 x 90 25 247,4516 x 95 25 307,5016 x 100 25 309,4516 x 105 25 518,1016 x 110 25 519,9516 x 115 25 585,0016 x 120 25 717,8516 x 125 25 796,4516 x 130 25 798,4516 x 140 25 847,9016 x 150 25 963,3516 x 160 25 1042,9020 x 40 25 276,5520 x 45 25 279,35
Abmessung VPE Preis €
20 x 50 25 274,5520 x 55 25 277,4020 x 60 25 291,0520 x 65 25 304,6520 x 70 25 317,2020 x 75 25 328,8520 x 80 25 342,5020 x 85 25 366,7020 x 90 25 367,6520 x 95 25 381,3020 x 100 25 385,1020 x 105 25 422,0520 x 110 25 424,9020 x 115 25 441,4520 x 120 25 511,2020 x 125 25 535,5020 x 130 25 538,4520 x 135 25 823,6020 x 140 25 826,5520 x 145 25 904,1520 x 150 25 1103,9520 x 155 25 1198,1520 x 160 25 1200,9520 x 170 25 1298,9520 x 180 25 1397,9520 x 190 25 1498,8520 x 200 25 1700,6020 x 210 25 1801,4520 x 220 25 1906,3020 x 230 25 2013,0020 x 240 25 2115,8022 x 65 25 794,6022 x 80 25 854,5524 x 50 25 460,8524 x 55 25 461,7024 x 60 25 455,9524 x 65 25 461,7024 x 70 25 479,2524 x 75 25 497,7024 x 80 25 512,2024 x 85 25 539,35
Abmessung VPE Preis €
24 x 90 25 540,3024 x 95 25 567,5524 x 100 25 571,4024 x 105 25 599,5024 x 110 25 603,4024 x 115 25 635,4524 x 120 25 640,2524 x 125 20 675,1524 x 130 20 678,1024 x 135 20 711,1024 x 140 20 819,8024 x 145 20 856,6524 x 150 20 861,4524 x 155 20 1236,9524 x 160 20 1241,7524 x 165 20 1333,9524 x 170 20 1624,0024 x 175 20 1739,4024 x 180 20 1744,2024 x 190 20 1862,6024 x 200 20 1982,9527 x 75 10 746,7527 x 90 10 848,9027 x 100 10 891,6027 x 110 10 936,1527 x 120 10 983,7527 x 130 10 1005,9527 x 135 10 1047,7027 x 140 10 1053,5027 x 150 10 1271,8030 x 90 10 1920,0030 x 105 10 2021,0030 x 110 10 2068,8030 x 120 10 2182,0030 x 135 10 2367,00
Seite 300 04 / 2019
Preise per 100 Stück
Zylinderstifte Toleranzfeld h8
Parallel pins
d m 6c max.r =
20,3
2
30,45
3
40,6
4
50,75
5
60,9
6
81,2
8
101,510
121,812
blankISO 2338
künftig ISO / EN
Stahl
Goupilles cylindriques
-
Abmessung VPE Preis €
2 x 4 100 2,902 x 6 100 3,002 x 8 100 3,252 x 10 100 3,252 x 12 100 3,402 x 14 100 3,602 x 18 100 4,053 x 6 100 4,803 x 8 100 4,353 x 10 100 4,603 x 12 100 4,203 x 14 100 5,303 x 16 100 5,403 x 18 100 5,553 x 20 100 5,803 x 24 100 6,053 x 28 100 6,503 x 30 100 6,553 x 32 100 7,453 x 40 100 7,954 x 6 100 5,554 x 8 100 5,254 x 10 100 5,454 x 12 100 6,054 x 14 100 5,954 x 16 100 6,654 x 18 100 6,504 x 20 100 6,804 x 24 100 7,604 x 28 100 7,554 x 30 100 7,804 x 32 100 8,304 x 36 100 8,554 x 40 100 8,854 x 50 100 11,705 x 8 100 7,055 x 10 100 6,705 x 12 100 7,355 x 14 100 7,955 x 16 100 7,905 x 18 100 8,70
Abmessung VPE Preis €
5 x 20 100 8,555 x 24 100 9,655 x 28 100 10,155 x 30 100 10,205 x 32 100 10,905 x 36 100 11,505 x 40 100 11,856 x 8 100 7,856 x 10 100 7,906 x 12 100 8,306 x 14 100 8,456 x 16 100 8,806 x 18 100 9,856 x 20 100 9,756 x 24 100 11,306 x 28 100 12,306 x 30 100 12,756 x 32 100 13,156 x 36 100 14,206 x 40 100 17,656 x 45 100 19,706 x 50 100 22,506 x 60 100 26,258 x 14 100 14,858 x 16 100 14,208 x 18 100 16,758 x 20 100 15,808 x 24 100 18,708 x 28 100 20,708 x 30 100 20,108 x 32 100 21,158 x 36 100 23,758 x 40 100 24,658 x 45 100 28,658 x 50 100 30,608 x 55 100 33,658 x 60 100 36,108 x 70 100 40,108 x 80 100 46,0010 x 16 100 45,0010 x 20 100 45,40
Abmessung VPE Preis €
10 x 24 100 49,6010 x 32 100 55,4510 x 36 100 58,3010 x 40 100 60,1010 x 45 100 62,2510 x 50 100 67,2010 x 55 100 70,6010 x 60 100 74,0510 x 70 100 81,2510 x 80 100 91,7510 x 100 100 99,1012 x 24 100 64,9512 x 32 100 74,4012 x 40 100 79,5012 x 45 100 85,9512 x 50 100 90,7012 x 60 50 100,5012 x 70 50 110,1512 x 80 50 120,9512 x 100 50 139,1512 x 120 50 156,7016 x 32 25 107,3016 x 40 25 118,6516 x 50 25 137,0016 x 60 25 154,50
Preise per 100 Stück
04 / 2019 Seite 301
Zylinderstifte Toleranzfeld m6
Parallel pins
d m 6c max.r ø
1,00,15
1
1,50,231,6
2,00,3
2
2,50,42,5
3,00,45
3
4,00,6
4
5,00,75
5
6,00,9
6
8,01,2
8
10,01,510
12,01,812
14,02
16
16,02,516
20,03
20
blankISO 2338
künftig ISO / EN
Stahl
Goupilles cylindriques
-
Abmessung VPE Preis €
1 x 5 100 3,401 x 6 100 3,251 x 8 100 3,751,5 x 5 100 3,401,5 x 6 100 3,751,5 x 8 100 3,651,5 x 10 100 3,851,5 x 12 100 3,601,5 x 14 100 3,802 x 4 100 3,302 x 5 100 3,702 x 6 100 2,902 x 8 100 3,602 x 10 100 3,502 x 12 100 3,652 x 14 100 3,902 x 16 100 4,152 x 18 100 4,202 x 20 100 4,352 x 24 100 4,552,5 x 5 100 3,652,5 x 6 100 3,602,5 x 8 100 3,852,5 x 10 100 4,002,5 x 12 100 3,852,5 x 14 100 4,352,5 x 16 100 4,702,5 x 18 100 4,502,5 x 20 100 5,002,5 x 24 100 5,353 x 5 100 5,503 x 6 100 4,803 x 8 100 4,953 x 10 100 4,953 x 12 100 5,053 x 14 100 5,803 x 16 100 5,453 x 18 100 6,153 x 20 100 6,403 x 24 100 6,953 x 28 100 6,45
Abmessung VPE Preis €
3 x 30 100 7,303 x 32 100 8,253 x 40 100 8,354 x 6 100 6,204 x 8 100 5,854 x 10 100 6,254 x 12 100 5,854 x 14 100 6,654 x 16 100 7,054 x 18 100 7,354 x 20 100 7,154 x 22 100 7,954 x 24 100 8,104 x 28 100 8,154 x 30 100 8,454 x 32 100 8,804 x 35 100 9,154 x 40 100 9,255 x 8 100 7,955 x 10 100 7,055 x 12 100 7,655 x 14 100 7,655 x 16 100 8,905 x 18 100 9,805 x 20 100 9,155 x 24 100 10,205 x 28 100 11,155 x 30 100 11,555 x 32 100 12,055 x 40 100 12,755 x 45 100 15,555 x 50 100 19,605 x 60 100 23,756 x 8 100 9,456 x 10 100 8,956 x 12 100 9,406 x 14 100 10,256 x 16 100 10,656 x 18 100 11,656 x 20 100 11,456 x 24 100 12,50
Abmessung VPE Preis €
6 x 28 100 14,056 x 30 100 14,256 x 32 100 14,906 x 35 100 15,606 x 40 100 16,606 x 45 100 17,706 x 50 100 29,706 x 55 100 33,906 x 60 100 34,756 x 70 100 39,258 x 10 100 34,058 x 12 100 35,158 x 14 100 16,458 x 16 100 17,908 x 18 100 19,458 x 20 100 18,858 x 24 100 21,608 x 26 100 24,058 x 28 100 25,158 x 30 100 24,858 x 32 100 27,158 x 35 100 28,708 x 40 50 30,758 x 45 50 35,658 x 50 50 37,608 x 55 50 42,158 x 60 50 44,758 x 70 50 50,558 x 90 50 86,358 x 100 50 94,1510 x 16 50 43,9510 x 18 50 43,6510 x 20 50 26,9510 x 24 50 30,5510 x 28 50 33,4510 x 30 50 34,9510 x 32 50 35,8510 x 35 50 39,2510 x 40 50 42,3510 x 45 50 46,6510 x 50 50 51,95
Seite 302 04 / 2019
Preise per 100 Stück
Zylinderstifte Toleranzfeld m6
Parallel pins
d m 6c max.r ø
1,00,15
1
1,50,231,6
2,00,3
2
2,50,42,5
3,00,45
3
4,00,6
4
5,00,75
5
6,00,9
6
8,01,2
8
10,01,510
12,01,812
14,02
16
16,02,516
20,03
20
blankISO 2338
künftig ISO / EN
Stahl
Goupilles cylindriques
-
Abmessung VPE Preis €
10 x 55 50 56,2010 x 60 50 59,3510 x 70 50 66,8510 x 80 50 74,1510 x 90 50 103,2010 x 100 50 110,4512 x 20 50 37,3512 x 24 50 41,0512 x 28 50 45,3012 x 30 50 46,7512 x 32 50 49,3512 x 40 50 56,4012 x 45 50 62,6512 x 50 50 67,4512 x 55 50 71,2512 x 60 50 77,5012 x 70 50 101,3012 x 80 50 109,6512 x 100 50 121,1012 x 120 50 146,6016 x 32 25 101,0516 x 35 25 104,4016 x 40 25 113,1516 x 50 25 129,7516 x 55 25 146,3016 x 60 25 154,6016 x 70 25 171,1016 x 80 25 187,7516 x 90 25 204,3520 x 40 25 174,8520 x 45 25 199,6020 x 50 25 212,6520 x 60 25 238,7520 x 70 25 264,9020 x 80 25 290,9520 x 100 25 367,90
Preise per 100 Stück
04 / 2019 Seite 303
Zylinderstifte Toleranzfeld m6
Parallel pins
d m 6c max.r =
20,3
2
30,45
3
40,6
4
50,75
5
60,9
6
81,2
8
101,510
121,812
blankISO 2338
künftig ISO / EN
A1
Goupilles cylindriques
-
Abmessung VPE Preis €
1 x 6 100 3,151 x 10 100 3,351 x 12 100 3,601,5 x 3 100 3,451,5 x 6 100 3,701,5 x 8 100 3,951,5 x 10 100 3,951,5 x 24 100 12,902 x 4 100 4,152 x 5 100 4,002 x 6 100 4,002 x 8 100 4,602 x 10 100 4,902 x 12 100 5,102 x 16 100 5,902 x 18 100 6,452 x 20 100 6,552,5 x 8 100 6,802,5 x 10 100 7,702,5 x 12 100 8,352,5 x 14 100 9,052,5 x 18 100 10,252,5 x 20 100 11,002,5 x 24 100 12,303 x 5 100 6,403 x 6 100 6,453 x 8 100 6,953 x 10 100 7,253 x 12 100 8,503 x 14 100 9,353 x 16 100 10,303 x 18 100 11,053 x 20 100 11,403 x 24 100 13,653 x 30 100 15,503 x 32 100 16,954 x 8 100 10,804 x 10 100 11,804 x 12 100 12,004 x 14 100 13,954 x 16 100 14,90
Abmessung VPE Preis €
4 x 18 100 16,354 x 20 100 17,254 x 24 100 19,204 x 28 100 20,954 x 30 100 22,204 x 32 100 22,854 x 35 100 24,604 x 40 100 26,704 x 50 100 31,505 x 10 100 14,255 x 12 100 15,455 x 14 100 17,155 x 16 100 18,155 x 18 100 19,655 x 20 100 23,805 x 24 100 27,555 x 28 100 30,305 x 30 100 31,355 x 32 100 32,955 x 36 100 36,105 x 40 100 38,305 x 50 100 45,356 x 8 100 16,906 x 12 100 24,556 x 14 100 26,806 x 16 100 27,656 x 20 100 29,206 x 24 100 35,056 x 28 100 37,606 x 30 100 37,806 x 32 100 42,156 x 40 100 47,906 x 50 100 56,506 x 60 100 64,356 x 70 100 73,106 x 80 100 81,158 x 10 50 33,408 x 12 50 35,708 x 14 50 37,058 x 16 50 36,708 x 20 50 42,40
Abmessung VPE Preis €
8 x 24 50 50,108 x 28 50 55,558 x 30 50 57,608 x 32 50 61,208 x 35 50 64,958 x 40 50 69,158 x 45 50 76,158 x 50 50 83,308 x 55 50 89,608 x 60 50 96,208 x 70 50 110,2510 x 20 50 67,3510 x 24 50 78,5510 x 30 50 90,0010 x 40 50 108,5510 x 45 50 119,30
Seite 304 04 / 2019
Preise per 100 Stück
Gewindestifte mit Innensechskant und Kegelkuppe
Hexagon socket head set screws with flat point
ddp max.s Nennmaß
M 32
1,5
M 42,5
2
M 53,52,5
M 643
M 85,5
4
M 1075
M 128,5
6
M 16128
M 201510
brüniertISO 4026
künftig ISO / EN
45H
Vis sans tête à six pans creux à bout plat
-
Abmessung VPE Preis €
2,0 x 2 500 11,302,0 x 3 500 13,402,0 x 4 500 13,502,0 x 5 500 13,702,0 x 6 500 14,002,0 x 8 500 14,202,0 x 10 500 17,202,5 x 3 500 15,002,5 x 4 500 16,502,5 x 5 500 18,002,5 x 6 500 20,002,5 x 8 500 21,502,5 x 10 500 22,202,5 x 12 500 20,253,0 x 3 500 2,903,0 x 4 500 4,003,0 x 5 500 4,403,0 x 6 500 4,603,0 x 8 500 4,803,0 x 10 500 4,803,0 x 12 500 5,903,0 x 16 500 8,303,0 x 20 500 13,304 x 3 500 11,304 x 4 500 6,804 x 5 500 6,504 x 6 500 6,654 x 8 500 6,804 x 10 500 7,104 x 12 500 7,454 x 16 500 8,454 x 20 500 9,104 x 25 500 12,004 x 30 500 22,804 x 35 500 28,404 x 40 500 31,605 x 4 500 3,805 x 5 500 3,005 x 6 500 3,205 x 8 500 3,605 x 10 500 4,00
Abmessung VPE Preis €
5 x 12 500 5,105 x 16 500 8,305 x 18 500 12,005 x 20 200 8,705 x 25 200 10,105 x 30 200 12,705 x 35 200 16,605 x 40 200 20,506 x 4 500 5,006 x 5 500 5,006 x 6 500 6,006 x 8 500 7,856 x 10 500 7,956 x 12 500 8,506 x 16 500 9,556 x 20 200 10,906 x 25 200 14,756 x 30 200 15,606 x 35 200 19,706 x 40 200 21,306 x 45 200 24,406 x 50 200 26,506 x 55 200 35,406 x 60 200 36,108 x 6 200 5,308 x 8 200 7,008 x 10 200 8,408 x 12 200 8,708 x 16 200 12,908 x 18 200 20,208 x 20 200 15,308 x 25 200 20,208 x 30 200 25,008 x 35 200 27,008 x 40 100 32,608 x 45 100 40,408 x 50 100 45,808 x 60 100 55,108 x 70 100 77,408 x 80 100 89,8010 x 8 200 14,45
Abmessung VPE Preis €
10 x 10 200 14,4510 x 12 200 18,1010 x 16 200 18,3010 x 20 200 22,4010 x 25 200 30,9010 x 30 200 39,8010 x 35 200 48,3010 x 40 200 60,7010 x 45 100 65,2010 x 50 100 66,1010 x 60 100 84,7010 x 70 100 93,1010 x 80 100 129,1010 x 90 100 171,2010 x 100 100 185,1012 x 10 100 18,8012 x 12 100 18,8012 x 16 100 27,0012 x 20 100 37,9012 x 25 100 43,1012 x 30 100 57,8012 x 35 100 68,8012 x 40 100 80,0012 x 45 100 84,4012 x 50 100 101,8012 x 55 100 109,9012 x 60 50 123,3012 x 70 50 146,2012 x 80 50 206,9012 x 90 50 217,3012 x 100 100 241,3014 x 16 100 84,9016 x 16 100 66,4016 x 20 100 71,6016 x 25 100 82,2016 x 30 100 97,7016 x 35 50 120,0016 x 40 50 143,9016 x 45 50 170,3016 x 50 50 182,4016 x 60 50 247,80
Preise per 100 Stück
04 / 2019 Seite 305
Gewindestifte mit Innensechskant und Kegelkuppe
Hexagon socket head set screws with flat point
ddp max.s Nennmaß
M 32
1,5
M 42,5
2
M 53,52,5
M 643
M 85,5
4
M 1075
M 128,5
6
M 16128
M 201510
brüniertISO 4026
künftig ISO / EN
45H
Vis sans tête à six pans creux à bout plat
-
Abmessung VPE Preis €
16 x 70 50 285,3016 x 80 50 319,3016 x 90 50 381,9016 x 100 50 447,5020 x 20 50 130,9020 x 25 50 140,5020 x 30 50 172,3020 x 35 50 222,9020 x 40 50 293,7020 x 45 50 310,6020 x 50 50 361,4020 x 60 50 384,1020 x 70 50 521,8020 x 80 50 583,8020 x 90 50 581,8020 x 100 50 720,0024 x 25 50 337,3024 x 30 50 347,3024 x 35 50 440,0024 x 40 50 454,1024 x 45 50 600,2024 x 50 50 722,4024 x 60 25 805,9024 x 70 25 923,9024 x 80 25 1058,0024 x 90 25 1215,5024 x 100 25 1412,10
Seite 306 04 / 2019
Preise per 100 Stück
Gewindestifte mit Innensechskant und Kegelkuppe
Hexagon socket head set screws with flat point
ddp max.s Nennmaß
M 32
1,5
M 42,5
2
M 53,52,5
M 643
M 85,5
4
M 1075
M 128,5
6
M 16128
M 201510
verz. blauISO 4026
künftig ISO / EN
45H
Vis sans tête à six pans creux à bout plat
-
Abmessung VPE Preis €
2,0 x 4 1000 16,402,0 x 6 1000 19,802,0 x 8 1000 20,202,0 x 10 1000 21,102,5 x 3 1000 23,702,5 x 4 1000 22,852,5 x 5 1000 23,052,5 x 6 1000 24,052,5 x 8 1000 24,302,5 x 10 1000 25,102,5 x 12 1000 26,903,0 x 3 500 4,703,0 x 4 500 5,003,0 x 5 500 5,703,0 x 6 500 5,203,0 x 8 500 5,303,0 x 10 500 6,103,0 x 12 500 7,403,0 x 16 500 9,603,0 x 20 500 15,704 x 4 500 3,604 x 5 500 3,604 x 6 500 4,004 x 8 500 4,404 x 10 500 4,604 x 12 500 9,104 x 16 500 11,404 x 20 500 14,904 x 25 500 15,704 x 30 500 16,404 x 35 500 29,504 x 40 500 46,905 x 5 500 5,005 x 6 500 4,305 x 8 500 4,405 x 10 500 5,005 x 12 500 5,305 x 16 500 7,605 x 20 500 12,005 x 25 200 14,105 x 30 200 16,80
Abmessung VPE Preis €
5 x 35 200 18,805 x 40 200 26,206 x 5 500 5,406 x 6 500 4,106 x 8 500 5,306 x 10 500 5,806 x 12 500 6,406 x 16 500 11,106 x 18 500 15,506 x 20 500 14,606 x 25 200 17,906 x 30 200 19,706 x 35 200 26,006 x 40 200 28,806 x 45 200 34,606 x 50 200 34,906 x 60 200 46,908 x 8 200 9,208 x 10 200 9,508 x 12 200 10,108 x 16 200 15,908 x 20 200 23,608 x 25 200 28,708 x 30 200 33,708 x 35 200 40,608 x 40 100 44,408 x 45 100 52,408 x 50 100 57,608 x 60 100 72,108 x 70 100 97,808 x 80 100 103,0010 x 8 200 12,0010 x 10 200 13,8010 x 12 200 15,8010 x 16 200 23,6010 x 20 200 30,6010 x 25 200 39,2010 x 30 200 53,5010 x 35 200 62,3010 x 40 200 72,6010 x 45 100 79,10
Abmessung VPE Preis €
10 x 50 100 91,1010 x 60 100 112,3010 x 70 100 140,2010 x 80 100 173,7010 x 90 100 186,5010 x 100 100 229,3012 x 10 100 22,8012 x 12 100 23,7012 x 16 100 40,9012 x 20 100 45,4012 x 25 100 58,5012 x 30 100 65,1012 x 35 100 80,2012 x 40 100 92,3012 x 45 100 123,9012 x 50 100 126,5012 x 60 100 151,8012 x 70 100 188,2012 x 80 100 214,1012 x 90 100 290,4012 x 100 100 305,5016 x 16 100 85,0016 x 20 100 85,2016 x 25 100 107,0016 x 30 100 130,9016 x 35 50 148,8016 x 40 50 171,3016 x 45 50 210,3016 x 50 50 252,6016 x 60 50 354,1016 x 70 50 416,0016 x 80 50 468,6016 x 90 50 613,0020 x 20 50 165,5020 x 25 50 168,1020 x 30 50 217,7020 x 35 50 275,4020 x 40 50 338,5020 x 45 50 244,5820 x 50 50 396,1020 x 60 50 496,70
Preise per 100 Stück
04 / 2019 Seite 307
Gewindestifte mit Innensechskant und Kegelkuppe
Hexagon socket head set screws with flat point
ddp max.s Nennmaß
M 32
1,5
M 42,5
2
M 53,52,5
M 643
M 85,5
4
M 1075
M 128,5
6
M 16128
M 201510
verz. blauISO 4026
künftig ISO / EN
45H
Vis sans tête à six pans creux à bout plat
-
Abmessung VPE Preis €
20 x 70 50 638,4020 x 80 50 682,1020 x 90 50 793,3024 x 25 50 498,1024 x 30 50 446,2024 x 35 50 552,3024 x 40 50 565,3024 x 45 50 700,0024 x 50 50 900,0024 x 60 25 1114,6024 x 70 25 1321,8024 x 80 25 1644,00
Seite 308 04 / 2019
Preise per 100 Stück
Gewindestifte mit Innensechskant und Kegelkuppe
Hexagon socket head set screws with flat point
ddp max.S Nennmaß
M 32
1,5
M 42,5
2
M 53,52,5
M 643
M 85,5
4
M 1075
M 128,5
6
blankISO 4026
künftig ISO / EN
A2
Vis sans tête à six pans creux à bout plat
-
Abmessung VPE Preis €
2,0 x 3 500 16,502,0 x 4 500 16,302,0 x 5 500 16,402,0 x 6 500 16,402,0 x 8 500 20,002,0 x 10 500 20,002,0 x 12 500 21,902,0 x 16 500 25,102,5 x 3 500 16,502,5 x 4 500 16,302,5 x 5 500 16,402,5 x 6 500 16,402,5 x 8 500 20,002,5 x 10 500 20,002,5 x 12 500 21,902,5 x 16 500 25,103,0 x 3 500 5,003,0 x 4 500 5,203,0 x 5 500 5,303,0 x 6 500 5,453,0 x 8 500 5,853,0 x 10 500 6,703,0 x 12 500 7,503,0 x 16 500 10,603,0 x 20 500 12,804 x 4 500 5,704 x 5 500 5,704 x 6 500 5,304 x 8 500 5,504 x 10 500 7,004 x 12 500 7,304 x 16 500 8,404 x 20 500 10,005 x 5 500 5,305 x 6 500 5,705 x 8 500 6,205 x 10 500 6,705 x 12 500 7,355 x 16 500 8,655 x 20 500 12,005 x 25 200 14,40
Abmessung VPE Preis €
5 x 30 200 17,806 x 6 200 6,156 x 8 200 6,706 x 10 200 7,506 x 12 200 8,356 x 16 200 8,906 x 20 200 12,256 x 25 200 16,406 x 30 200 18,356 x 35 200 22,156 x 40 200 22,258 x 8 200 8,358 x 10 200 10,308 x 12 200 13,908 x 16 200 17,458 x 20 200 19,458 x 25 200 23,358 x 30 200 25,708 x 35 200 32,008 x 40 200 32,808 x 45 200 43,908 x 50 200 46,7010 x 10 200 15,6010 x 12 200 18,9010 x 16 200 20,0010 x 20 200 33,1010 x 25 100 35,3010 x 30 100 37,9010 x 35 100 43,9010 x 40 100 50,0010 x 45 100 60,0010 x 50 100 77,8012 x 12 100 29,8512 x 16 100 31,1112 x 20 100 53,9012 x 25 100 56,7012 x 30 100 60,8512 x 35 100 80,6012 x 40 100 90,5612 x 45 100 102,2512 x 50 100 128,35
Preise per 100 Stück
04 / 2019 Seite 309
Gewindestifte mit Innensechskant und Spitze
Hexagon socket head set screws with cone Point
ddt maxs Nennmaß
M 3-
1,5
M 4-2
M 5-
2,5
M 61,5
3
M 824
M 102,5
5
M 1236
M 1648
M 205
10
brüniertISO 4027
künftig ISO / EN
45H
Vis sans tête, à six pans creux, à bout pointu
-
Abmessung VPE Preis €
2,0 x 3 1000 27,502,0 x 4 1000 31,102,0 x 5 1000 29,802,0 x 6 1000 34,702,5 x 4 1000 24,602,5 x 5 1000 30,903,0 x 3 500 6,703,0 x 4 500 8,703,0 x 5 500 9,003,0 x 6 500 8,703,0 x 8 500 10,303,0 x 10 500 10,403,0 x 12 500 13,703,0 x 16 500 15,303,0 x 20 500 20,504 x 3 500 4,704 x 4 500 5,904 x 5 500 5,904 x 6 500 6,204 x 8 500 6,504 x 10 500 6,704 x 12 500 7,504 x 16 500 10,104 x 20 500 15,304 x 25 500 20,504 x 30 500 27,304 x 35 500 38,705 x 4 500 10,405 x 5 500 6,505 x 6 500 6,505 x 8 500 6,505 x 10 500 7,405 x 12 500 8,005 x 16 500 9,005 x 20 500 15,705 x 25 200 23,105 x 30 200 24,305 x 35 200 26,005 x 40 200 35,806 x 5 500 12,706 x 6 500 5,40
Abmessung VPE Preis €
6 x 8 500 6,306 x 10 500 3,906 x 12 500 8,406 x 16 500 8,706 x 20 500 14,906 x 25 200 18,006 x 30 200 19,906 x 35 200 22,306 x 40 200 27,706 x 45 200 40,606 x 50 200 41,906 x 60 200 39,408 x 8 200 11,108 x 10 200 9,608 x 12 200 10,708 x 16 200 11,808 x 20 200 17,808 x 25 200 21,608 x 30 200 25,708 x 35 200 37,108 x 40 100 46,608 x 45 100 49,108 x 50 100 52,708 x 60 100 75,108 x 80 100 130,2010 x 8 200 21,1010 x 10 200 14,7010 x 12 200 15,9010 x 16 200 20,2010 x 20 200 24,3010 x 25 200 37,8010 x 30 200 46,0010 x 35 200 51,0010 x 40 200 53,4010 x 45 100 78,9010 x 50 100 91,6010 x 60 100 95,9010 x 70 100 103,8010 x 80 100 142,4010 x 100 100 153,7012 x 10 100 24,50
Abmessung VPE Preis €
12 x 12 100 26,0012 x 16 100 30,0012 x 20 100 40,4012 x 25 100 52,9012 x 30 100 57,8012 x 35 100 76,3012 x 40 100 82,3012 x 45 100 92,7012 x 50 100 99,6012 x 55 100 107,2012 x 60 50 124,1012 x 70 50 161,4012 x 80 50 193,3014 x 30 100 85,6016 x 16 100 52,9016 x 20 100 70,4016 x 25 100 97,2016 x 30 100 121,1016 x 35 50 140,0016 x 40 50 160,0016 x 45 50 180,0016 x 50 50 200,0016 x 60 50 270,9016 x 70 50 316,4016 x 80 50 371,0020 x 20 50 123,3020 x 25 50 173,2020 x 30 50 253,4020 x 35 50 409,2020 x 40 50 429,4020 x 45 50 446,3020 x 50 50 463,1020 x 60 50 480,2020 x 70 50 533,8020 x 80 50 690,30
Seite 310 04 / 2019
Preise per 100 Stück
Gewindestifte mit Innensechskant und Spitze
Hexagon socket head set screws with cone Point
ddt maxs Nennmaß
M 3-
1,5
M 4-2
M 5-
2,5
M 61,5
3
M 824
M 102,5
5
M 1236
M 1648
M 205
10
verz. blauISO 4027
künftig ISO / EN
45H
Vis sans tête, à six pans creux, à bout pointu
-
Abmessung VPE Preis €
3 x 3 500 10,303 x 4 500 10,503 x 5 500 10,653 x 6 500 10,853 x 8 500 11,153 x 10 500 13,703 x 12 500 12,503 x 16 500 13,953 x 20 500 14,754 x 4 500 7,904 x 5 500 7,304 x 6 500 7,504 x 8 500 8,204 x 10 500 8,904 x 12 500 9,504 x 16 500 11,954 x 20 500 12,354 x 25 500 16,704 x 30 500 18,654 x 35 500 48,905 x 4 500 14,505 x 5 500 6,905 x 6 500 7,405 x 8 500 8,405 x 10 500 8,505 x 12 500 9,805 x 16 500 15,705 x 20 500 17,305 x 25 200 19,405 x 30 200 22,655 x 35 200 25,355 x 40 200 28,906 x 6 500 7,006 x 8 500 7,906 x 10 500 8,206 x 12 500 9,906 x 16 500 12,306 x 20 500 16,606 x 25 200 17,606 x 30 200 23,406 x 35 200 28,20
Abmessung VPE Preis €
6 x 40 200 31,106 x 45 200 47,006 x 50 200 43,456 x 60 200 52,458 x 8 200 13,508 x 10 200 13,508 x 12 200 15,408 x 16 200 15,908 x 20 200 20,108 x 25 200 38,408 x 30 200 37,908 x 35 200 46,408 x 40 100 52,508 x 45 100 73,408 x 50 100 58,508 x 60 100 153,2010 x 10 100 17,8010 x 12 100 19,6010 x 16 100 27,4010 x 20 100 33,5010 x 25 100 47,5010 x 30 100 52,4010 x 35 100 60,2010 x 40 100 77,3010 x 45 100 94,3010 x 50 100 105,3010 x 60 100 125,0010 x 70 100 145,0012 x 10 100 31,1012 x 12 100 29,5012 x 16 100 40,4012 x 20 100 51,4012 x 25 100 60,2012 x 30 100 81,8012 x 35 100 89,7012 x 40 100 101,5012 x 45 100 130,0012 x 50 100 142,2012 x 60 50 166,2016 x 16 100 90,0016 x 20 100 95,20
Abmessung VPE Preis €
16 x 25 100 119,4016 x 30 100 125,0016 x 35 50 164,2016 x 40 50 187,3016 x 45 50 222,3016 x 50 50 409,6016 x 60 50 424,2016 x 70 50 497,0016 x 80 50 562,0020 x 20 50 254,5020 x 25 50 265,0020 x 30 50 274,2020 x 35 50 300,0020 x 40 50 346,2020 x 45 50 400,0020 x 50 50 443,2020 x 60 50 536,60
Preise per 100 Stück
04 / 2019 Seite 311
Gewindestifte mit Innensechskant und Spitze
Hexagon socket head set screws with cone Point
dd1 max.s Nennmaß
M 3-
1,5
M 4-2
M 5-
2,5
M 61,5
3
M 824
M 102,5
5
M 1236
blankISO 4027
künftig ISO / EN
A2
Vis sans tête, à six pans creux, à bout pointu
-
Abmessung VPE Preis €
2,0 x 3 500 16,502,0 x 4 500 16,302,0 x 5 500 16,402,0 x 6 500 16,402,0 x 8 500 20,002,0 x 10 500 20,002,0 x 12 500 21,902,0 x 16 500 25,102,5 x 3 500 16,502,5 x 4 500 16,302,5 x 5 500 16,402,5 x 6 500 16,302,5 x 8 500 20,002,5 x 10 500 20,002,5 x 12 500 21,902,5 x 16 500 25,103,0 x 3 500 11,153,0 x 4 500 11,153,0 x 5 500 7,253,0 x 6 500 8,203,0 x 8 500 9,903,0 x 10 500 12,853,0 x 12 500 13,653,0 x 16 500 17,253,0 x 20 500 22,804 x 4 500 8,354 x 4 500 8,354 x 5 500 8,334 x 6 500 6,154 x 8 500 7,204 x 10 500 7,404 x 12 500 14,454 x 16 500 15,404 x 20 500 16,205 x 6 500 5,565 x 8 500 7,505 x 10 500 7,615 x 12 500 8,005 x 16 500 8,225 x 20 500 13,905 x 25 200 21,45
Abmessung VPE Preis €
5 x 30 200 23,206 x 6 200 7,506 x 8 200 8,606 x 10 200 9,206 x 12 200 10,456 x 16 200 11,156 x 20 200 14,456 x 25 200 18,106 x 30 200 27,406 x 35 200 30,056 x 40 200 32,358 x 8 200 14,568 x 10 200 15,008 x 12 200 17,358 x 16 200 18,508 x 20 200 19,808 x 25 200 28,358 x 30 200 32,208 x 35 200 39,458 x 40 200 47,708 x 45 200 52,708 x 50 200 55,8010 x 10 200 23,9010 x 12 200 23,9010 x 16 200 25,6010 x 20 200 30,6010 x 25 100 45,6010 x 30 100 49,4510 x 35 100 60,9510 x 40 100 65,6010 x 45 100 72,3010 x 50 100 77,5012 x 12 100 40,0012 x 16 100 46,7012 x 20 100 52,4012 x 25 100 92,4512 x 30 100 103,8012 x 35 100 114,1512 x 40 100 126,0512 x 45 100 141,5012 x 50 100 154,45
Abmessung VPE Preis €
12 x 60 100 195,2016 x 16 50 147,7016 x 20 50 168,9016 x 25 50 189,5516 x 30 50 228,2516 x 35 50 237,5516 x 40 50 263,4016 x 45 50 285,6016 x 50 50 305,7516 x 60 50 325,3520 x 20 50 578,4020 x 25 50 593,9020 x 30 50 609,3520 x 35 50 624,8520 x 40 50 640,3520 x 45 50 655,8520 x 50 50 671,3520 x 60 50 723,00
Seite 312 04 / 2019
Preise per 100 Stück
Gewindestifte mit Innensechskant und Zapfen
Hexagon socket head set screws with dog point
ddp max.s Nennmaß
M 32
1,5
M 42,5
2
M 53,52,5
M 643
M 85,5
4
M 1075
M 128,5
6
M 16128
M 201510
brüniertISO 4028
künftig ISO / EN
45H
Vis sans tête à six pans creux à têton long
-
Abmessung VPE Preis €
3 x 3 500 5,203 x 4 500 3,403 x 5 500 3,603 x 6 500 3,703 x 8 500 3,903 x 10 500 6,803 x 12 500 8,903 x 16 500 9,203 x 20 500 15,704 x 4 500 4,604 x 5 500 4,204 x 6 500 4,604 x 8 500 5,004 x 10 500 5,004 x 12 500 5,404 x 16 500 6,704 x 20 500 11,204 x 25 500 18,304 x 30 500 20,004 x 40 500 35,105 x 5 500 3,405 x 6 500 4,205 x 8 500 5,205 x 10 500 5,805 x 12 500 6,505 x 16 500 6,905 x 20 500 10,205 x 25 200 16,905 x 30 200 18,705 x 35 200 23,905 x 40 200 30,406 x 5 500 6,506 x 6 500 6,306 x 8 500 4,206 x 10 500 4,706 x 12 500 6,006 x 16 500 6,506 x 20 500 10,506 x 25 200 12,006 x 30 200 12,506 x 35 200 16,60
Abmessung VPE Preis €
6 x 40 200 20,506 x 45 200 34,706 x 50 200 36,206 x 60 200 39,408 x 6 200 9,408 x 8 200 7,408 x 10 200 7,508 x 12 200 9,108 x 16 200 12,708 x 20 200 17,308 x 25 200 19,308 x 30 200 26,208 x 35 200 28,708 x 40 100 33,408 x 45 100 42,508 x 50 100 44,708 x 60 100 54,708 x 70 100 61,108 x 80 100 83,8010 x 10 200 10,3010 x 12 200 16,2010 x 16 200 20,2010 x 20 200 27,9010 x 25 200 30,0010 x 30 200 36,5010 x 35 200 43,6010 x 40 200 50,0010 x 45 100 67,1010 x 50 100 69,1010 x 55 100 109,8010 x 60 100 99,8010 x 70 100 104,1010 x 80 100 115,1012 x 12 100 20,8012 x 16 100 26,6012 x 20 100 37,8012 x 25 100 48,1012 x 30 100 52,1012 x 35 100 63,3012 x 40 100 73,4012 x 45 100 82,00
Abmessung VPE Preis €
12 x 50 100 107,3012 x 55 100 118,9012 x 60 50 120,6012 x 70 50 152,0012 x 80 50 158,5016 x 16 50 104,0016 x 20 50 114,1016 x 25 50 148,4016 x 30 50 171,2016 x 35 50 205,5016 x 40 50 218,8016 x 45 50 223,2016 x 50 50 227,3016 x 60 50 234,0016 x 70 50 244,3016 x 80 50 384,5016 x 90 50 436,3016 x 100 50 578,7020 x 20 50 123,9020 x 25 50 149,4020 x 30 50 201,9020 x 35 50 242,2020 x 40 50 283,4020 x 45 50 323,2020 x 50 50 371,0020 x 60 50 398,3020 x 70 50 525,4020 x 80 50 584,9024 x 30 50 447,2024 x 35 50 476,1024 x 40 50 476,1024 x 45 50 570,4024 x 50 50 578,3024 x 60 50 732,7024 x 70 50 767,0024 x 80 50 1199,30
Preise per 100 Stück
04 / 2019 Seite 313
Gewindestifte mit Innensechskant und Zapfen
Hexagon socket head set screws with dog point
ddp max.s Nennmaß
M 32
1,5
M 42,5
2
M 53,52,5
M 643
M 85,5
4
M 1075
M 128,5
6
M 16128
M 201510
verz. blauISO 4028
künftig ISO / EN
45H
Vis sans tête à six pans creux à têton long
-
Abmessung VPE Preis €
3 x 3 500 12,303 x 4 500 10,353 x 5 500 10,653 x 6 500 12,003 x 8 500 12,603 x 10 500 14,703 x 12 500 18,003 x 16 500 25,203 x 20 500 29,904 x 4 500 13,604 x 5 500 10,304 x 6 500 5,204 x 8 500 5,504 x 10 500 6,404 x 12 500 10,904 x 16 500 12,404 x 20 500 16,604 x 25 500 19,704 x 30 500 27,405 x 5 500 4,205 x 6 500 4,405 x 8 500 4,905 x 10 500 5,205 x 12 500 8,505 x 16 500 11,805 x 20 500 14,905 x 25 200 20,105 x 30 200 29,205 x 35 200 39,005 x 40 200 49,006 x 6 500 7,106 x 8 500 9,206 x 10 500 7,406 x 12 500 7,606 x 16 500 12,906 x 20 500 15,906 x 25 200 19,806 x 30 200 21,006 x 35 200 34,206 x 40 200 33,206 x 45 200 44,00
Abmessung VPE Preis €
6 x 50 200 47,008 x 8 200 11,908 x 10 200 12,008 x 12 200 12,408 x 16 200 20,008 x 20 200 20,408 x 25 200 25,608 x 30 200 33,308 x 35 200 41,508 x 40 100 52,108 x 45 100 53,008 x 50 100 54,7010 x 12 200 19,2010 x 16 200 27,2010 x 20 200 32,0010 x 25 200 45,5010 x 30 200 54,1010 x 35 200 67,7010 x 40 200 65,0010 x 45 100 80,0010 x 50 100 86,9010 x 55 100 102,5010 x 60 100 129,1012 x 12 100 38,9012 x 16 100 39,9012 x 20 100 42,2012 x 25 100 56,7012 x 30 100 72,0012 x 35 100 81,6012 x 40 100 111,2012 x 45 100 140,0012 x 50 100 150,8012 x 55 100 171,7012 x 60 50 174,5012 x 70 50 229,4012 x 80 50 268,2016 x 16 50 64,4016 x 20 50 136,9016 x 25 50 174,4016 x 30 50 182,5016 x 35 50 227,30
Abmessung VPE Preis €
16 x 40 50 231,6016 x 45 50 234,0016 x 50 50 249,0016 x 60 50 286,4016 x 70 50 384,5020 x 20 50 210,0020 x 25 50 220,0020 x 30 50 230,0020 x 35 50 243,7020 x 40 50 388,6020 x 45 50 390,0020 x 50 50 396,1020 x 60 50 498,1020 x 70 50 677,0020 x 80 50 809,5024 x 30 50 463,1024 x 40 50 525,40
Seite 314 04 / 2019
Preise per 100 Stück
Gewindestifte mit Innensechskant und Zapfen
Hexagon socket head set screws with dog point
ddp max.S Nennmaß
M 32
1,5
M 42,5
2
M 53,52,5
M 643
M 85,5
4
M 1075
M 128,5
6
blankISO 4028
künftig ISO / EN
A2
Vis sans tête à six pans creux à têton long
-
Abmessung VPE Preis €
2 x 3 500 16,502 x 4 500 16,302 x 5 500 16,402 x 6 500 16,402 x 8 500 20,002 x 10 500 20,002 x 12 500 21,902 x 16 500 25,102,5 x 3 500 16,502,5 x 4 500 16,302,5 x 5 500 16,402,5 x 6 500 16,402,5 x 8 500 20,002,5 x 10 500 20,002,5 x 12 500 21,902,5 x 16 500 25,103 x 3 500 13,353 x 4 500 13,353 x 5 500 10,853 x 6 500 10,003 x 8 500 10,003 x 10 500 12,253 x 12 500 15,303 x 16 500 16,403 x 20 500 18,654 x 4 500 10,004 x 5 500 10,004 x 6 500 11,154 x 8 500 12,204 x 10 500 12,254 x 12 500 12,854 x 16 500 15,154 x 20 500 16,205 x 5 500 10,605 x 6 500 11,005 x 8 500 11,505 x 10 500 12,255 x 12 500 13,355 x 16 500 14,605 x 20 500 19,705 x 25 200 21,45
Abmessung VPE Preis €
5 x 30 200 23,206 x 6 200 12,256 x 8 200 12,806 x 10 200 15,006 x 12 200 15,506 x 16 200 17,256 x 20 200 19,356 x 25 200 24,206 x 30 200 27,556 x 35 200 30,056 x 40 200 32,358 x 8 200 16,708 x 10 200 21,158 x 12 200 22,608 x 16 200 25,708 x 20 200 29,908 x 25 200 33,858 x 30 200 39,508 x 35 200 42,908 x 40 200 47,708 x 45 200 52,708 x 50 200 55,8010 x 10 200 30,6010 x 12 200 32,8010 x 16 200 38,7510 x 20 200 49,0510 x 25 200 49,4010 x 30 200 54,2510 x 35 200 60,9510 x 40 200 65,6010 x 45 200 72,3010 x 50 200 77,5012 x 12 100 48,9012 x 16 100 50,6012 x 20 100 54,5012 x 25 100 89,4512 x 30 100 93,9012 x 35 100 98,9012 x 40 100 110,5012 x 45 100 130,6012 x 50 100 141,70
Abmessung VPE Preis €
12 x 60 100 197,0016 x 16 50 147,7016 x 20 50 168,9016 x 25 50 189,5516 x 30 50 228,2516 x 35 50 237,5516 x 40 50 263,4016 x 45 50 285,6016 x 50 50 305,7516 x 60 50 325,3520 x 20 50 578,4020 x 25 50 593,9020 x 30 50 609,3520 x 35 50 624,8520 x 40 50 640,3520 x 45 50 655,8520 x 50 50 671,3520 x 60 50 723,00
Preise per 100 Stück
04 / 2019 Seite 315
Gewindestifte mit Innensechskant und Ringschneide
Hexagon socket head set screws with cup point
ddv max.s Nennmaß
M 31,41,5
M 422
M 52,52,5
M 633
M 854
M 1065
M 1286
M 16108
brüniertISO 4029
künftig ISO / EN
45H
Vis sans tête, à six pans creux, à cuvette
-
Abmessung VPE Preis €
2 x 2 1000 15,002 x 3 1000 10,602 x 4 1000 10,302 x 5 1000 9,402 x 6 1000 10,102,5 x 3 1000 6,702,5 x 4 1000 8,002,5 x 5 1000 8,902,5 x 6 1000 9,502,5 x 8 1000 36,452,5 x 10 1000 10,102,5 x 12 1000 15,003 x 3 500 3,803 x 4 500 3,203 x 5 500 3,803 x 6 500 3,903 x 8 500 3,803 x 10 500 4,403 x 12 500 4,603 x 16 500 8,603 x 20 500 12,704 x 4 500 2,404 x 5 500 2,404 x 6 500 2,704 x 8 500 3,204 x 10 500 3,604 x 12 500 4,304 x 16 500 4,904 x 20 500 7,504 x 25 500 9,704 x 30 500 15,004 x 40 500 25,205 x 4 500 4,405 x 5 500 3,705 x 6 500 2,905 x 8 500 13,105 x 10 500 3,605 x 12 500 4,605 x 16 500 5,905 x 20 500 8,605 x 25 200 11,40
Abmessung VPE Preis €
5 x 30 200 12,205 x 35 200 24,805 x 40 200 31,206 x 5 500 5,006 x 6 500 8,456 x 8 500 7,856 x 10 500 7,956 x 12 500 8,506 x 14 500 10,906 x 16 500 9,556 x 20 500 10,906 x 25 200 12,006 x 30 200 14,106 x 35 200 14,906 x 40 200 16,906 x 45 200 23,906 x 50 200 24,006 x 60 200 36,958 x 6 200 5,208 x 8 200 7,008 x 10 200 7,508 x 12 200 7,908 x 14 200 12,958 x 16 200 10,508 x 20 200 15,208 x 25 200 18,508 x 30 200 25,708 x 35 200 29,908 x 40 100 34,008 x 45 100 40,008 x 50 100 40,008 x 60 100 47,708 x 70 100 56,808 x 80 100 81,6010 x 10 200 10,1010 x 12 200 12,5010 x 14 200 18,0510 x 16 200 18,5010 x 20 200 27,6010 x 25 200 32,8010 x 30 200 38,40
Abmessung VPE Preis €
10 x 35 200 48,3010 x 40 200 55,9010 x 45 100 60,7010 x 50 100 63,0010 x 60 100 76,2010 x 80 100 126,4012 x 10 100 15,9012 x 12 100 17,1012 x 14 100 28,4012 x 16 100 27,4012 x 20 100 36,5012 x 25 100 40,6012 x 30 100 52,7012 x 35 100 56,8012 x 40 100 74,1012 x 45 100 87,8012 x 50 100 89,5012 x 60 100 124,4012 x 70 50 146,5012 x 80 50 167,6014 x 30 50 82,1016 x 16 100 44,1016 x 20 100 66,6016 x 25 100 77,7016 x 30 100 108,1016 x 35 50 124,5016 x 40 50 128,6016 x 45 50 143,0016 x 50 50 164,0016 x 60 50 215,8016 x 70 50 240,0016 x 80 50 338,3016 x 90 50 348,5016 x 100 50 451,3020 x 20 50 116,3020 x 25 50 154,6020 x 30 50 192,1020 x 35 50 209,1020 x 40 50 270,6020 x 45 50 340,7020 x 50 50 353,70
Seite 316 04 / 2019
Preise per 100 Stück
Gewindestifte mit Innensechskant und Ringschneide
Hexagon socket head set screws with cup point
ddv max.s Nennmaß
M 31,41,5
M 422
M 52,52,5
M 633
M 854
M 1065
M 1286
M 16108
brüniertISO 4029
künftig ISO / EN
45H
Vis sans tête, à six pans creux, à cuvette
-
Abmessung VPE Preis €
20 x 60 50 421,5020 x 70 50 481,8020 x 80 50 563,4020 x 90 50 769,1024 x 30 50 325,2024 x 35 50 418,3024 x 40 50 500,0024 x 45 50 600,0024 x 50 50 687,1024 x 60 50 696,2024 x 70 50 900,5024 x 80 50 990,0024 x 90 50 1020,0024 x 100 50 1405,90
Preise per 100 Stück
04 / 2019 Seite 317
Gewindestifte mit Innensechskant und Ringschneide
Hexagon socket head set screws with cup point
ddv max.s Nennmaß
M 31,41,5
M 422
M 52,52,5
M 633
M 854
M 1065
M 1286
M 16108
verz. blauISO 4029
künftig ISO / EN
45H
Vis sans tête, à six pans creux, à cuvette
-
Abmessung VPE Preis €
3 x 3 500 4,303 x 4 500 3,903 x 5 500 4,303 x 6 500 5,103 x 8 500 5,303 x 10 500 5,303 x 12 500 6,303 x 16 500 10,403 x 20 500 15,604 x 4 500 3,804 x 5 500 3,004 x 6 500 3,004 x 8 500 4,204 x 10 500 4,404 x 12 500 4,804 x 16 500 6,104 x 20 500 13,005 x 5 500 3,805 x 6 500 3,605 x 8 500 3,605 x 10 500 5,005 x 12 500 5,805 x 16 500 6,405 x 20 500 12,405 x 25 200 15,305 x 30 200 21,305 x 35 200 23,806 x 5 500 7,606 x 6 500 3,006 x 8 500 4,406 x 10 500 5,306 x 12 500 8,106 x 14 500 14,506 x 16 500 9,206 x 20 500 15,106 x 25 200 15,406 x 30 200 20,706 x 35 200 22,808 x 8 200 7,508 x 10 200 9,208 x 12 200 12,20
Abmessung VPE Preis €
8 x 14 200 17,308 x 16 200 17,208 x 20 200 18,608 x 25 200 24,608 x 30 200 30,408 x 35 200 38,308 x 40 100 43,808 x 45 100 54,008 x 50 100 65,8010 x 8 200 13,5010 x 10 200 12,7010 x 12 200 18,1010 x 16 200 26,1010 x 20 200 33,2010 x 25 200 43,5010 x 30 200 53,5010 x 35 200 58,9010 x 40 200 72,3010 x 45 100 100,0010 x 50 100 102,2010 x 60 100 109,6010 x 70 100 133,5010 x 80 100 158,10
Seite 318 04 / 2019
Preise per 100 Stück
Gewindestifte mit Innensechskant und Ringschneide
Hexagon socket head set screws with cup point
ddp max.S Nennmaß
M 31,41,5
M 422
M 52,52,5
M 633
M 854
M 1065
blankISO 4029
künftig ISO / EN
A2
Vis sans tête, à six pans creux, à cuvette
-
Abmessung VPE Preis €
3 x 4 500 6,153 x 5 500 6,703 x 6 500 7,153 x 8 500 7,653 x 10 500 9,203 x 12 500 10,603 x 16 500 11,703 x 20 500 15,004 x 4 500 4,754 x 5 500 4,754 x 6 500 6,404 x 8 500 6,504 x 10 500 6,954 x 12 500 12,854 x 16 500 15,154 x 20 500 16,205 x 5 500 4,755 x 6 500 4,755 x 8 500 6,005 x 10 500 7,005 x 12 500 8,105 x 16 500 8,405 x 20 500 11,155 x 25 200 19,405 x 30 200 23,206 x 6 200 5,006 x 8 200 5,356 x 10 200 6,706 x 12 200 7,756 x 16 200 10,006 x 20 200 15,606 x 25 200 22,756 x 30 200 27,556 x 35 200 30,056 x 40 200 32,358 x 8 200 11,008 x 10 200 12,258 x 12 200 13,728 x 16 200 15,658 x 20 200 18,258 x 25 200 23,35
Abmessung VPE Preis €
8 x 30 200 30,358 x 35 200 34,458 x 40 200 36,008 x 45 200 52,708 x 50 200 55,8010 x 10 200 19,4510 x 12 200 24,4510 x 16 200 25,9510 x 20 200 27,5010 x 25 100 30,3510 x 30 100 38,3510 x 35 100 50,0010 x 40 100 57,2510 x 45 100 72,3010 x 50 100 77,5012 x 12 100 34,8012 x 16 100 38,9012 x 20 100 46,7012 x 25 100 54,4512 x 30 100 68,9012 x 35 100 79,4512 x 40 100 98,3512 x 45 100 101,1012 x 50 100 110,0012 x 60 100 144,0016 x 16 50 147,7016 x 20 50 168,9016 x 25 50 189,5516 x 30 50 228,2516 x 35 50 237,5516 x 40 50 263,4016 x 45 50 285,6016 x 50 50 305,7516 x 60 50 325,3520 x 20 50 578,4020 x 25 50 593,9020 x 30 50 609,3520 x 35 50 624,8520 x 40 50 640,3520 x 45 50 655,8520 x 50 50 335,70
Preise per 100 Stück
04 / 2019 Seite 319
Sechskantmuttern gestempelt
Hexagon nuts
Gewinde dm max.e min.s Nennmaß
M 65,2
11,0510
M 86,8
14,3813
M 108,4
18,9016
M 1210,8
21,1018
M 1614,8
26,7524
M 2018
32,9530
M 2421,5
39,5536
M 2723,8
45,2041
M 3025,6
50,8546
M 3328,7
55,3750
M 3631
60,7955
blankISO 4032
künftig ISO / EN
5.2
ADW 7/ TRD 106
-
Abmessung VPE Preis €
10 500 12,2012 500 15,7016 200 30,3520 100 59,5024 50 97,0527 25 158,00
Seite 320 04 / 2019
Preise per 100 Stück
Sechskantmuttern gestempelt
Hexagon nuts
Gewinde dm max.e min.s Nennmaß
M 65,2
11,0510
M 86,8
14,3813
M 108,4
18,9016
M 1210,8
21,1018
M 1614,8
26,7524
M 2018
32,9530
M 2421,5
39,5536
M 2723,8
45,2041
M 3025,6
50,8546
M 3328,7
55,3750
M 3631
60,7955
verz. blauISO 4032
künftig ISO / EN
5.2
ADW 7/ TRD 106
-
Abmessung VPE Preis €
10 500 15,2012 500 20,8516 200 40,4020 100 79,3524 100 141,7027 25 240,0030 25 294,3033 10 441,45
Preise per 100 Stück
04 / 2019 Seite 321
Zylinderschrauben mit Innensechskant
Hexagon socket head cap screws
db Hilfsmaßdk max.k max.s Nennmaß
M 318
5,683
2,5
M 420
7,2243
M 522
8,7254
M 624
10,2265
M 828
13,2786
M 1032
16,27108
M 1236
18,271210
M 1440
21,331412
M 1644
24,331614
M 1848
27,331814
M 2052
30,332017
M 2460
36,392419
M 2766
40,392719
M 3072
45,393022
M 3684
54,463627
brüniertISO 4762
künftig ISO / EN
8.8
Vis à six pans creux, tête cylindrique
-
Abmessung VPE Preis €
3 x 5 500 4,803 x 6 500 4,803 x 8 500 5,353 x 10 500 5,653 x 12 500 6,003 x 14 500 6,303 x 16 500 6,753 x 18 500 7,203 x 20 500 7,953 x 22 500 9,353 x 25 500 9,353 x 30 500 11,453 x 35 500 14,303 x 40 500 14,304 x 6 500 6,104 x 8 500 6,104 x 10 500 6,104 x 12 500 6,454 x 14 500 7,004 x 16 500 7,404 x 18 500 8,204 x 20 500 8,854 x 22 500 10,354 x 25 500 10,354 x 30 500 12,104 x 35 200 13,854 x 40 200 15,354 x 45 200 17,104 x 50 200 18,754 x 55 200 20,504 x 60 200 33,454 x 65 200 44,704 x 70 200 52,554 x 80 200 109,555 x 6 500 6,305 x 8 500 6,305 x 10 500 6,305 x 12 500 4,805 x 14 500 5,105 x 16 500 5,105 x 18 500 5,55
Abmessung VPE Preis €
5 x 20 500 6,005 x 25 500 6,755 x 30 500 7,205 x 35 200 8,305 x 40 200 10,255 x 45 200 11,105 x 50 200 12,305 x 55 200 13,105 x 60 200 14,305 x 70 200 16,005 x 80 200 28,355 x 90 200 35,956 x 6 500 12,506 x 8 500 12,056 x 10 500 5,456 x 12 500 5,656 x 14 500 6,006 x 16 500 5,806 x 18 500 6,106 x 20 500 6,456 x 22 500 12,506 x 25 500 7,306 x 30 500 7,956 x 35 200 9,806 x 40 200 10,556 x 45 200 11,456 x 50 200 12,656 x 55 200 14,606 x 60 200 16,006 x 65 200 17,106 x 70 200 18,106 x 75 200 19,306 x 80 200 20,406 x 85 200 23,656 x 90 200 23,656 x 100 100 26,156 x 110 100 35,106 x 120 100 38,256 x 130 100 46,656 x 140 100 51,106 x 150 100 55,50
Abmessung VPE Preis €
8 x 10 200 12,558 x 12 200 12,558 x 14 200 12,558 x 16 200 12,558 x 18 200 12,558 x 20 200 11,458 x 22 200 12,308 x 25 200 12,958 x 30 200 14,608 x 35 200 16,358 x 40 200 18,558 x 45 100 20,058 x 50 100 21,458 x 55 100 23,208 x 60 100 25,208 x 65 100 28,008 x 70 100 30,308 x 75 100 32,608 x 80 100 34,458 x 85 100 36,108 x 90 50 41,958 x 100 50 41,958 x 110 50 52,308 x 120 50 52,308 x 130 50 70,858 x 140 50 70,858 x 150 50 77,0510 x 12 200 25,4010 x 14 200 21,9010 x 16 200 21,1510 x 20 200 20,0510 x 22 200 20,7010 x 25 200 21,9010 x 30 200 24,0010 x 35 100 26,1510 x 40 100 28,0010 x 45 100 31,4010 x 50 100 34,4510 x 55 100 37,3010 x 60 100 39,4510 x 65 100 42,95
Seite 322 04 / 2019
Preise per 100 Stück
Zylinderschrauben mit Innensechskant
Hexagon socket head cap screws
db Hilfsmaßdk max.k max.s Nennmaß
M 318
5,683
2,5
M 420
7,2243
M 522
8,7254
M 624
10,2265
M 828
13,2786
M 1032
16,27108
M 1236
18,271210
M 1440
21,331412
M 1644
24,331614
M 1848
27,331814
M 2052
30,332017
M 2460
36,392419
M 2766
40,392719
M 3072
45,393022
M 3684
54,463627
brüniertISO 4762
künftig ISO / EN
8.8
Vis à six pans creux, tête cylindrique
-
Abmessung VPE Preis €
10 x 70 100 45,8010 x 75 100 48,9510 x 80 100 51,4510 x 85 50 57,3510 x 90 50 60,1510 x 100 50 66,5010 x 110 50 72,7010 x 120 50 79,5510 x 130 50 97,7510 x 140 50 97,7510 x 150 50 103,4510 x 160 50 151,0510 x 170 50 160,4510 x 180 50 168,6010 x 190 50 184,3010 x 200 50 184,3012 x 20 200 30,9512 x 25 200 30,9512 x 30 200 34,7512 x 35 100 37,3012 x 40 100 41,1012 x 45 100 44,1512 x 50 100 47,6512 x 55 100 51,6512 x 60 100 55,5012 x 65 50 58,9512 x 70 50 62,0012 x 75 50 65,2012 x 80 50 70,2012 x 90 50 85,2512 x 100 50 92,1012 x 110 50 101,6012 x 120 50 123,5012 x 130 50 123,5012 x 140 50 133,5512 x 150 50 142,2512 x 160 25 151,0512 x 170 25 181,8012 x 180 25 191,8512 x 190 25 211,2512 x 200 25 211,25
Abmessung VPE Preis €
14 x 30 100 50,8014 x 35 100 50,8014 x 40 100 55,1514 x 45 100 59,2014 x 50 100 68,3514 x 55 100 75,2014 x 60 100 75,2014 x 65 50 90,9014 x 70 50 90,9014 x 80 50 102,1514 x 90 50 113,4514 x 100 50 123,5014 x 110 50 134,7014 x 120 50 146,7014 x 130 50 169,3014 x 140 50 178,6514 x 150 50 200,5514 x 160 50 219,4014 x 170 50 238,1514 x 180 50 256,3514 x 200 50 282,6516 x 25 100 79,0516 x 30 100 68,3516 x 35 100 75,2016 x 40 100 81,5516 x 45 100 87,7516 x 50 100 94,0516 x 55 100 101,6016 x 60 50 108,4516 x 65 50 114,6516 x 70 50 114,6516 x 75 50 114,6516 x 80 50 135,4016 x 90 50 159,8016 x 100 50 174,3016 x 110 50 187,3516 x 120 50 202,4016 x 130 50 229,4516 x 140 50 246,3516 x 150 50 260,7516 x 160 50 277,10
Abmessung VPE Preis €
16 x 170 25 338,4516 x 180 25 357,3016 x 190 25 379,2016 x 200 25 401,1016 x 220 25 482,6516 x 240 25 526,4516 x 260 25 564,1016 x 280 25 598,5018 x 50 50 145,4018 x 55 25 145,4018 x 60 25 150,4018 x 65 25 162,3018 x 70 25 179,3018 x 75 25 179,3018 x 80 25 188,7018 x 90 25 219,9518 x 100 25 243,0518 x 110 25 316,1018 x 120 25 348,8018 x 130 25 370,6018 x 140 25 431,6520 x 40 50 142,9020 x 45 50 141,0520 x 50 50 151,0520 x 55 50 161,1020 x 60 50 169,8020 x 65 50 179,8520 x 70 50 188,7020 x 75 50 209,9520 x 80 50 209,9520 x 90 50 246,3520 x 100 50 268,2520 x 110 50 291,4520 x 120 25 313,4020 x 130 25 344,7520 x 140 25 369,8520 x 150 25 401,1020 x 160 10 445,0520 x 170 10 488,8520 x 180 10 532,8020 x 190 10 582,95
Preise per 100 Stück
04 / 2019 Seite 323
Zylinderschrauben mit Innensechskant
Hexagon socket head cap screws
db Hilfsmaßdk max.k max.s Nennmaß
M 318
5,683
2,5
M 420
7,2243
M 522
8,7254
M 624
10,2265
M 828
13,2786
M 1032
16,27108
M 1236
18,271210
M 1440
21,331412
M 1644
24,331614
M 1848
27,331814
M 2052
30,332017
M 2460
36,392419
M 2766
40,392719
M 3072
45,393022
M 3684
54,463627
brüniertISO 4762
künftig ISO / EN
8.8
Vis à six pans creux, tête cylindrique
-
Abmessung VPE Preis €
20 x 200 10 626,7520 x 220 10 783,5020 x 240 10 855,5520 x 250 10 915,0520 x 260 10 915,0520 x 280 10 980,9020 x 300 10 1150,0524 x 45 50 277,1024 x 50 50 290,1524 x 55 50 306,5024 x 60 50 322,7524 x 65 50 338,4524 x 70 50 357,3024 x 75 25 385,4024 x 80 25 401,1024 x 90 25 435,5524 x 100 25 466,9524 x 110 25 504,5524 x 120 25 539,0024 x 130 25 604,8524 x 140 20 642,4524 x 150 20 680,0524 x 160 10 717,6524 x 170 10 796,0524 x 180 10 796,0524 x 200 10 868,1024 x 220 10 1137,5024 x 240 10 1222,2024 x 260 10 1378,8524 x 280 10 1479,1524 x 300 10 1566,9024 x 360 10 1874,0527 x 50 10 498,2527 x 55 10 523,3027 x 60 10 523,3027 x 70 10 626,7527 x 80 10 626,7527 x 90 10 676,9027 x 100 10 733,3527 x 110 10 780,3527 x 120 10 839,85
Abmessung VPE Preis €
27 x 130 5 952,6527 x 140 5 1009,1027 x 150 5 1049,8027 x 160 5 1125,0027 x 180 5 1231,6027 x 190 5 1466,6027 x 200 5 1362,5027 x 210 5 1854,4027 x 220 5 1778,7527 x 230 5 1788,2527 x 240 5 1788,2527 x 250 5 2043,6527 x 260 5 2043,6527 x 270 5 3046,5527 x 280 5 2327,5027 x 300 5 2611,3030 x 55 10 783,5030 x 60 10 742,7530 x 65 10 770,9530 x 70 10 802,2530 x 80 10 890,0030 x 90 10 946,4530 x 100 10 1009,1030 x 110 10 1068,6530 x 120 10 1150,0530 x 130 10 1212,7530 x 140 10 1284,9030 x 150 10 1372,6530 x 160 10 1435,3030 x 170 10 1566,9030 x 180 10 1566,9030 x 200 10 1723,6030 x 220 5 2187,4030 x 240 5 2331,5030 x 250 5 2519,5530 x 260 5 2519,5530 x 280 5 2576,0030 x 300 5 2839,2536 x 70 5 1485,4536 x 80 5 1617,0036 x 90 5 1754,90
Abmessung VPE Preis €
36 x 100 5 1855,2036 x 110 5 1968,0036 x 120 5 2087,1536 x 130 5 2199,9536 x 140 5 2312,7536 x 150 5 2450,6536 x 160 5 2563,4536 x 170 5 2582,2036 x 180 5 2789,1036 x 190 5 2839,9036 x 200 5 2589,5036 x 210 5 3003,0536 x 220 5 2937,6536 x 230 5 3024,7536 x 240 5 2981,2536 x 250 5 3122,7536 x 260 5 3155,3536 x 270 5 3699,3536 x 280 5 3558,0036 x 300 5 4015,00
Seite 324 04 / 2019
Preise per 100 Stück
Zylinderschrauben mit Innensechskant, verzinkt
Hexagon socket head cap screws
db Hilfsmaßdk max.k max.s Nennmaß
M 318
5,683
2,5
M 420
7,2243
M 522
8,7254
M 624
10,2265
M 828
13,2786
M 1032
16,27108
M 1236
18,271210
M 1440
21,331412
M 1644
24,331614
M 1848
27,331814
M 2052
30,332017
M 2460
36,392419
M 2766
40,392719
M 3072
45,393022
M 3684
54,463627
verz. blauISO 4762
künftig ISO / EN
8.8
Vis à six pans creux, tête cylindrique
-
Abmessung VPE Preis €
3 x 4 500 7,103 x 5 500 7,103 x 6 500 7,103 x 8 500 5,803 x 10 500 6,303 x 12 500 6,753 x 14 500 7,203 x 16 500 8,203 x 18 500 8,503 x 20 500 9,053 x 25 500 11,653 x 30 500 13,853 x 35 500 15,253 x 40 500 16,704 x 6 500 7,104 x 8 500 7,104 x 10 500 7,104 x 12 500 7,504 x 14 500 8,054 x 16 500 8,604 x 18 500 9,254 x 20 500 10,154 x 22 500 12,104 x 25 500 12,104 x 30 500 14,054 x 35 200 15,904 x 40 200 17,904 x 45 200 19,854 x 50 200 21,704 x 55 200 23,754 x 60 200 25,605 x 6 500 7,105 x 8 500 7,105 x 10 500 5,455 x 12 500 5,805 x 14 500 6,305 x 16 500 6,305 x 18 500 6,755 x 20 500 7,205 x 22 500 7,655 x 25 500 8,20
Abmessung VPE Preis €
5 x 30 500 9,055 x 35 200 11,655 x 40 200 12,555 x 45 200 13,855 x 50 200 15,255 x 55 200 16,155 x 60 200 16,155 x 70 200 24,405 x 80 100 36,856 x 8 500 7,106 x 10 500 6,556 x 12 500 7,006 x 14 500 7,306 x 16 500 7,006 x 18 500 7,756 x 20 500 7,756 x 22 500 8,206 x 25 500 9,056 x 30 500 9,806 x 35 200 11,906 x 40 200 12,956 x 45 200 13,856 x 50 200 15,156 x 55 200 17,356 x 60 200 19,306 x 65 200 20,506 x 70 200 21,806 x 75 200 23,006 x 80 200 24,756 x 85 100 40,456 x 90 100 40,456 x 100 100 44,256 x 110 100 50,706 x 120 100 53,856 x 130 100 64,856 x 140 100 71,606 x 150 100 77,308 x 10 200 16,008 x 12 200 13,408 x 14 200 13,408 x 16 200 12,45
Abmessung VPE Preis €
8 x 18 200 12,958 x 20 200 13,758 x 22 200 14,058 x 25 200 15,358 x 30 200 17,358 x 35 200 19,758 x 40 200 21,258 x 45 100 23,358 x 50 100 25,308 x 55 100 27,358 x 60 100 29,308 x 65 100 33,708 x 70 100 35,758 x 75 100 38,508 x 80 100 40,208 x 85 100 42,608 x 90 50 45,008 x 100 50 49,708 x 110 50 56,908 x 120 50 61,708 x 130 50 75,658 x 140 50 82,408 x 150 50 88,608 x 160 50 122,658 x 170 50 152,608 x 180 50 152,6010 x 16 200 26,1510 x 20 200 22,3510 x 25 200 24,7510 x 30 200 27,2510 x 35 100 29,6510 x 40 100 31,9510 x 45 100 35,9510 x 50 100 38,9010 x 55 100 41,8510 x 60 100 45,4510 x 65 100 48,4010 x 70 100 51,6510 x 75 100 54,6010 x 80 100 57,9010 x 85 100 64,40
Preise per 100 Stück
04 / 2019 Seite 325
Zylinderschrauben mit Innensechskant, verzinkt
Hexagon socket head cap screws
db Hilfsmaßdk max.k max.s Nennmaß
M 318
5,683
2,5
M 420
7,2243
M 522
8,7254
M 624
10,2265
M 828
13,2786
M 1032
16,27108
M 1236
18,271210
M 1440
21,331412
M 1644
24,331614
M 1848
27,331814
M 2052
30,332017
M 2460
36,392419
M 2766
40,392719
M 3072
45,393022
M 3684
54,463627
verz. blauISO 4762
künftig ISO / EN
8.8
Vis à six pans creux, tête cylindrique
-
Abmessung VPE Preis €
10 x 90 50 68,0010 x 100 50 74,5510 x 110 50 82,4010 x 120 50 90,9010 x 130 50 102,7010 x 140 50 108,5510 x 150 50 117,0510 x 160 50 181,8010 x 170 50 200,8010 x 180 50 200,8010 x 200 50 220,4012 x 16 100 54,6012 x 20 100 35,0012 x 25 100 35,0012 x 30 100 38,6012 x 35 100 42,8512 x 40 100 46,1012 x 45 100 49,7012 x 50 100 53,9512 x 55 100 57,9012 x 60 100 62,1512 x 65 50 66,7012 x 70 50 70,6512 x 75 50 73,9012 x 80 50 80,4512 x 90 50 95,5012 x 100 50 105,3012 x 110 50 113,8012 x 120 50 124,2512 x 130 50 139,9512 x 140 50 150,4012 x 150 50 159,6012 x 160 25 170,0512 x 170 25 215,8012 x 180 25 215,8012 x 200 25 239,3514 x 30 100 52,6514 x 35 100 57,2514 x 40 100 61,8014 x 45 100 67,3514 x 50 100 71,95
Abmessung VPE Preis €
14 x 55 100 78,5014 x 60 100 85,0014 x 70 50 102,7014 x 80 50 114,4514 x 90 50 126,9014 x 100 50 139,3014 x 110 50 155,6514 x 120 50 174,6016 x 25 100 89,6016 x 30 100 77,8516 x 35 100 85,0016 x 40 100 92,2016 x 45 100 96,8016 x 50 100 106,6016 x 55 100 113,8016 x 60 100 121,0016 x 65 50 128,8516 x 70 50 136,7016 x 75 50 153,0516 x 80 50 153,0516 x 90 50 177,9016 x 100 50 194,2516 x 110 50 211,2516 x 120 50 227,6016 x 130 50 250,5016 x 140 50 275,3516 x 150 50 294,3016 x 160 25 311,9516 x 170 25 451,2516 x 180 25 451,2516 x 200 25 451,2520 x 40 50 148,4520 x 45 50 158,9020 x 50 50 170,0520 x 55 50 181,8020 x 60 25 190,9520 x 65 50 202,1020 x 70 50 213,2020 x 75 50 224,3020 x 80 50 261,6020 x 90 50 277,30
Abmessung VPE Preis €
20 x 100 50 302,1520 x 110 50 330,2520 x 120 25 359,7020 x 130 25 392,4020 x 140 25 425,1020 x 150 10 451,2520 x 160 10 503,6020 x 170 10 529,7520 x 180 10 549,3520 x 190 10 693,2520 x 200 10 693,2524 x 40 50 296,9024 x 45 50 312,6024 x 50 50 330,2524 x 55 50 349,9024 x 60 50 366,2524 x 65 50 372,8024 x 70 50 412,0024 x 75 25 431,6524 x 80 25 451,2524 x 90 25 487,2524 x 100 25 529,7524 x 110 25 565,7024 x 120 25 601,7024 x 130 25 680,1524 x 140 10 722,6524 x 150 10 765,2024 x 160 10 807,7024 x 180 10 892,7024 x 200 10 971,20
Seite 326 04 / 2019
Preise per 100 Stück
Zylinderschrauben mit Innensechskant
Hexagon socket head cap screws
db Hilfsmaßdk max.k max.s Nennmaß
M 318
5,683
2,5
M 420
7,2243
M 522
8,7254
M 624
10,2265
M 828
13,2786
M 1032
16,27108
M 1236
18,271210
M 1440
21,331412
M 1644
24,331614
M 1848
27,331814
M 2052
30,332017
M 2256
33,392217
M 2460
36,392419
M 2766
40,392719
M 3072
45,393022
brüniertISO 4762
künftig ISO / EN
10.9
Vis à six pans creux, tête cylindrique
-
Abmessung VPE Preis €
3 x 6 500 8,053 x 8 500 8,053 x 10 500 8,053 x 12 500 8,303 x 14 500 8,953 x 16 500 9,703 x 20 500 10,353 x 25 500 13,954 x 6 500 7,204 x 8 500 7,204 x 10 500 7,204 x 12 500 7,954 x 14 500 7,954 x 16 500 7,954 x 18 500 7,954 x 20 500 8,604 x 22 500 11,554 x 25 500 14,604 x 30 500 17,554 x 35 200 20,804 x 40 200 23,555 x 8 500 6,105 x 10 500 6,105 x 12 500 6,455 x 14 500 6,755 x 16 500 7,205 x 18 500 7,205 x 20 500 7,205 x 22 500 7,955 x 25 500 7,955 x 30 500 10,155 x 35 200 11,355 x 40 200 12,855 x 45 200 14,055 x 50 200 15,255 x 55 200 22,905 x 60 200 27,156 x 8 500 7,656 x 10 500 7,656 x 12 500 8,306 x 14 500 8,95
Abmessung VPE Preis €
6 x 16 500 7,956 x 18 500 8,606 x 20 500 9,356 x 25 500 10,556 x 30 500 11,456 x 35 200 13,406 x 40 200 14,956 x 45 200 17,106 x 50 200 18,556 x 55 200 20,706 x 60 200 22,656 x 65 200 24,006 x 70 200 25,856 x 75 200 27,356 x 80 200 28,656 x 90 200 41,406 x 100 100 41,406 x 110 100 66,706 x 120 100 73,058 x 12 200 19,408 x 14 200 19,408 x 16 200 14,058 x 20 200 16,008 x 22 200 18,108 x 25 200 18,108 x 30 200 20,408 x 35 200 22,258 x 40 200 24,758 x 45 100 27,808 x 50 100 33,558 x 55 100 33,558 x 60 100 39,158 x 65 100 39,158 x 70 100 41,658 x 75 100 44,808 x 80 100 46,658 x 90 50 57,358 x 100 50 57,358 x 110 50 77,708 x 120 50 83,408 x 130 50 89,05
Abmessung VPE Preis €
8 x 140 50 94,608 x 150 50 100,3010 x 12 200 32,6010 x 14 200 27,7010 x 16 200 27,7010 x 20 200 27,7010 x 25 200 31,6010 x 30 200 33,2510 x 35 100 36,4010 x 40 100 38,2510 x 45 100 46,6510 x 50 100 46,6510 x 55 100 51,6510 x 60 100 55,8010 x 70 100 62,3510 x 80 100 69,5510 x 90 50 90,9010 x 100 50 90,9010 x 110 50 99,1010 x 120 50 105,9510 x 130 50 137,2510 x 140 50 157,3010 x 150 50 166,7510 x 160 50 186,1510 x 170 50 204,9010 x 180 50 214,9510 x 200 50 241,3512 x 14 200 139,2512 x 16 200 71,8012 x 18 200 100,6012 x 20 200 60,0012 x 22 200 98,4512 x 25 200 43,6012 x 30 200 47,6512 x 35 100 52,0012 x 40 100 56,7012 x 45 100 60,1512 x 50 100 71,5012 x 55 100 71,5012 x 60 100 82,7512 x 65 50 82,75
Preise per 100 Stück
04 / 2019 Seite 327
Zylinderschrauben mit Innensechskant
Hexagon socket head cap screws
db Hilfsmaßdk max.k max.s Nennmaß
M 318
5,683
2,5
M 420
7,2243
M 522
8,7254
M 624
10,2265
M 828
13,2786
M 1032
16,27108
M 1236
18,271210
M 1440
21,331412
M 1644
24,331614
M 1848
27,331814
M 2052
30,332017
M 2256
33,392217
M 2460
36,392419
M 2766
40,392719
M 3072
45,393022
brüniertISO 4762
künftig ISO / EN
10.9
Vis à six pans creux, tête cylindrique
-
Abmessung VPE Preis €
12 x 70 50 87,1012 x 75 50 94,6012 x 80 50 113,4512 x 90 50 113,4512 x 100 50 123,5012 x 110 50 136,0512 x 120 50 145,4012 x 130 50 167,3012 x 140 50 179,3012 x 150 50 191,2012 x 160 25 211,2512 x 170 25 247,0012 x 180 25 258,9014 x 25 100 64,0014 x 30 100 66,5014 x 35 100 75,2014 x 40 100 87,7514 x 45 100 87,7514 x 50 100 104,1014 x 60 100 104,1014 x 65 50 116,0014 x 70 50 121,6514 x 80 50 137,2514 x 90 50 161,1014 x 100 50 176,8016 x 25 50 133,1016 x 30 50 90,1516 x 35 50 103,4516 x 40 50 112,1516 x 45 50 118,5016 x 50 50 128,5016 x 55 50 147,9016 x 60 50 147,9016 x 65 50 156,7516 x 70 50 166,7516 x 75 50 176,8016 x 80 50 184,8516 x 90 50 212,4516 x 100 50 231,9516 x 110 50 253,2016 x 120 50 273,25
Abmessung VPE Preis €
16 x 130 50 309,6516 x 140 25 357,3016 x 150 25 357,3016 x 160 25 426,2016 x 170 25 426,2016 x 180 25 451,2516 x 200 25 498,2518 x 30 50 371,0018 x 35 50 371,0018 x 40 50 293,1018 x 45 50 296,8018 x 50 50 296,8018 x 55 25 299,2518 x 60 25 299,2518 x 65 25 305,4018 x 70 25 317,7018 x 80 25 352,6018 x 90 25 358,7018 x 100 25 391,8518 x 110 25 416,4018 x 120 25 494,2520 x 30 25 328,1020 x 35 25 328,1020 x 40 25 185,8520 x 45 25 194,3520 x 50 25 219,4020 x 55 25 237,3520 x 60 25 233,1520 x 65 25 244,5020 x 70 25 258,9020 x 75 25 274,5520 x 80 25 288,9520 x 90 25 319,7020 x 100 25 354,1520 x 110 25 391,7520 x 120 25 426,2020 x 130 25 432,5020 x 140 25 501,4020 x 150 25 576,6020 x 160 10 576,6020 x 170 10 608,00
Abmessung VPE Preis €
20 x 180 10 645,6020 x 200 10 739,5520 x 220 10 799,1020 x 240 10 871,2522 x 40 25 954,7022 x 45 25 963,6022 x 50 25 963,6022 x 55 25 1048,7522 x 60 25 1048,7522 x 65 25 1208,0522 x 70 25 1208,0522 x 75 25 1281,5522 x 80 25 1281,5522 x 90 25 1346,8022 x 100 10 1386,6522 x 110 10 1456,0022 x 120 10 1499,3024 x 40 25 877,0524 x 45 25 877,0524 x 50 25 401,1024 x 55 25 423,0524 x 60 25 448,1524 x 70 25 488,8524 x 80 25 526,4524 x 90 10 573,5024 x 100 10 617,3524 x 110 10 695,7024 x 120 10 802,2524 x 130 10 802,2524 x 140 10 855,5024 x 150 10 902,5024 x 160 10 952,6524 x 170 10 1040,4024 x 180 10 1040,4024 x 200 10 1146,9524 x 240 10 1372,6027 x 50 10 1489,0027 x 60 10 1562,4527 x 70 10 1636,6527 x 80 10 1710,7527 x 90 10 1857,80
Seite 328 04 / 2019
Preise per 100 Stück
Zylinderschrauben mit Innensechskant
Hexagon socket head cap screws
db Hilfsmaßdk max.k max.s Nennmaß
M 318
5,683
2,5
M 420
7,2243
M 522
8,7254
M 624
10,2265
M 828
13,2786
M 1032
16,27108
M 1236
18,271210
M 1440
21,331412
M 1644
24,331614
M 1848
27,331814
M 2052
30,332017
M 2256
33,392217
M 2460
36,392419
M 2766
40,392719
M 3072
45,393022
brüniertISO 4762
künftig ISO / EN
10.9
Vis à six pans creux, tête cylindrique
-
Abmessung VPE Preis €
27 x 100 10 1857,8027 x 110 10 1936,7527 x 120 10 2010,2527 x 130 10 2084,4027 x 140 10 2155,8527 x 150 10 2232,4527 x 180 10 2529,4527 x 200 10 2753,3530 x 50 10 1745,1530 x 55 10 1821,4030 x 60 10 1821,4030 x 65 10 1894,9030 x 70 10 1894,9030 x 75 10 1975,9030 x 80 10 1975,9030 x 90 10 2049,3530 x 100 10 2125,6030 x 110 10 2199,8030 x 120 10 2274,6530 x 130 10 2351,5530 x 140 10 2427,8030 x 150 10 2502,0030 x 160 10 2580,2530 x 170 10 2809,0030 x 180 10 2809,0030 x 190 10 3037,0030 x 200 10 3037,0030 x 220 10 3345,3030 x 240 10 3545,9036 x 100 5 3327,5036 x 110 5 3407,8536 x 120 5 3585,0036 x 130 5 3746,4536 x 140 5 3831,5536 x 150 5 3999,8536 x 160 5 4324,7036 x 170 5 4579,4536 x 180 5 4579,4536 x 190 5 4830,8536 x 200 5 4830,8536 x 220 5 5087,70
Abmessung VPE Preis €
36 x 240 5 5413,20
Preise per 100 Stück
04 / 2019 Seite 329
Zylinderschrauben mit Innensechskant
Hexagon socket head cap screws
db Hilfsmaßdk max.k max.s Nennmaß
M 318
5,683
2,5
M 420
7,2243
M 522
8,7254
M 624
10,2265
M 828
13,2786
M 1032
16,27108
M 1236
18,271210
M 1644
24,331614
M 2052
30,332017
M 2460
36,392419
verz. blauISO 4762
künftig ISO / EN
10.9
Vis à six pans creux, tête cylindrique
-
Abmessung VPE Preis €
3 x 6 500 18,853 x 8 500 15,253 x 10 500 12,753 x 12 500 13,403 x 16 500 14,053 x 20 500 15,053 x 25 500 16,554 x 6 500 13,304 x 8 500 7,804 x 10 500 7,304 x 12 500 7,404 x 16 500 7,754 x 18 500 7,904 x 20 500 8,204 x 25 500 8,704 x 30 500 9,554 x 35 200 10,354 x 40 200 31,605 x 6 500 22,355 x 8 500 16,355 x 10 500 6,855 x 12 500 7,305 x 14 500 16,355 x 16 500 7,705 x 18 500 9,255 x 20 500 8,305 x 25 500 8,855 x 30 500 9,705 x 35 200 12,305 x 40 200 12,955 x 45 200 19,905 x 50 200 25,905 x 55 200 29,205 x 60 200 30,955 x 70 200 42,305 x 80 200 63,006 x 8 500 20,656 x 10 500 10,656 x 12 500 11,006 x 14 500 17,956 x 16 500 11,35
Abmessung VPE Preis €
6 x 20 500 11,906 x 22 500 22,056 x 25 500 12,556 x 30 500 14,306 x 35 200 15,006 x 40 200 17,556 x 45 200 18,856 x 50 200 19,856 x 55 200 27,606 x 60 200 29,106 x 65 200 33,806 x 70 200 44,306 x 75 200 52,856 x 80 200 56,706 x 90 200 68,006 x 100 100 78,506 x 110 100 105,756 x 120 100 114,456 x 130 100 334,006 x 150 100 398,008 x 10 200 18,108 x 12 200 18,108 x 14 200 25,258 x 16 200 14,458 x 20 200 19,508 x 22 200 31,458 x 25 200 21,208 x 30 200 22,508 x 35 200 25,108 x 40 200 27,808 x 45 100 29,208 x 50 100 32,358 x 55 100 38,808 x 60 100 40,358 x 65 100 47,458 x 70 100 44,958 x 75 100 51,258 x 80 100 64,658 x 90 50 75,208 x 100 50 85,008 x 120 50 114,45
Abmessung VPE Preis €
8 x 130 50 160,258 x 140 50 173,308 x 150 50 274,708 x 160 50 308,458 x 170 50 351,008 x 180 50 370,608 x 200 50 567,9010 x 10 200 71,9510 x 12 200 71,9510 x 16 200 38,1510 x 20 200 35,0510 x 25 200 38,3510 x 30 200 40,3510 x 35 100 43,0010 x 40 100 45,6010 x 45 100 38,0510 x 50 100 40,6510 x 55 100 48,3010 x 60 100 50,9010 x 65 100 52,2010 x 70 100 56,2010 x 75 100 68,3510 x 80 100 69,6010 x 90 50 84,5510 x 100 50 93,2010 x 110 50 136,2510 x 120 50 171,1510 x 130 50 196,2010 x 140 50 214,7510 x 160 50 327,0010 x 170 50 374,9510 x 180 50 396,7512 x 20 200 45,9512 x 25 200 57,5512 x 30 200 60,1512 x 35 100 62,8512 x 40 100 64,8012 x 45 100 69,0512 x 50 100 73,4012 x 55 100 80,0512 x 60 100 84,65
Seite 330 04 / 2019
Preise per 100 Stück
Zylinderschrauben mit Innensechskant
Hexagon socket head cap screws
db Hilfsmaßdk max.k max.s Nennmaß
M 318
5,683
2,5
M 420
7,2243
M 522
8,7254
M 624
10,2265
M 828
13,2786
M 1032
16,27108
M 1236
18,271210
M 1644
24,331614
M 2052
30,332017
M 2460
36,392419
verz. blauISO 4762
künftig ISO / EN
10.9
Vis à six pans creux, tête cylindrique
-
Abmessung VPE Preis €
12 x 65 50 92,0012 x 70 50 95,7012 x 75 50 102,5512 x 80 50 103,1512 x 90 50 104,4012 x 100 50 118,8012 x 110 50 168,9512 x 120 50 173,3012 x 180 50 461,0012 x 200 50 573,3514 x 110 50 299,7516 x 30 50 97,8516 x 35 50 104,5016 x 40 50 99,5016 x 45 50 103,7516 x 50 50 110,1016 x 55 50 128,6016 x 60 50 134,0516 x 65 50 146,0516 x 70 50 149,3516 x 75 50 156,9516 x 80 50 156,9516 x 90 50 191,8516 x 100 50 219,1016 x 110 25 295,4016 x 120 50 295,4016 x 130 50 376,0520 x 30 25 185,3020 x 40 25 198,4020 x 45 25 201,6520 x 50 25 212,5520 x 55 25 231,1020 x 60 25 235,4520 x 65 25 252,9020 x 70 25 259,4020 x 75 25 256,1520 x 80 25 279,0520 x 90 25 344,4520 x 100 25 344,4520 x 110 25 374,9520 x 120 25 433,80
Abmessung VPE Preis €
20 x 130 25 523,2020 x 140 25 696,5020 x 150 25 789,1520 x 160 10 983,2024 x 40 25 882,9024 x 45 25 899,2524 x 50 25 522,1024 x 60 25 562,4524 x 65 25 566,8024 x 70 25 594,0524 x 80 25 630,0024 x 90 10 708,5024 x 100 10 740,1024 x 110 10 814,2524 x 120 10 848,0024 x 130 10 1052,9524 x 140 10 1276,40
Preise per 100 Stück
04 / 2019 Seite 331
Zylinderschrauben mit Innensechskant
Hexagon socket head cap screws
db Hilfsmaßdk max.k max.s Nennmaß
M 318
5,683
2,5
M 420
7,2243
M 522
8,7254
M 624
10,2265
M 828
13,2786
M 1032
16,27108
M 1236
18,271210
M 1644
24,331614
M 2052
30,332017
M 2460
36,392419
M 2766
40,392719
M 3072
45,393022
brüniertISO 4762
künftig ISO / EN
12.9
Vis à six pans creux, tête cylindrique
-
Abmessung VPE Preis €
2,0 x 4 500 14,552,0 x 5 500 14,552,0 x 6 500 15,352,0 x 8 500 15,352,0 x 10 500 16,002,0 x 12 500 17,352,5 x 4 500 15,252,5 x 5 500 15,252,5 x 6 500 16,602,5 x 8 500 16,702,5 x 10 500 17,952,5 x 12 500 19,452,5 x 16 500 20,803 x 4 500 16,353 x 5 500 16,353 x 6 500 9,803 x 8 500 10,553 x 10 500 11,653 x 12 500 12,453 x 14 500 14,703 x 16 500 14,703 x 18 500 16,703 x 20 500 16,703 x 22 500 20,053 x 25 500 20,053 x 30 500 22,803 x 35 500 26,253 x 40 500 29,753 x 45 500 32,503 x 50 500 36,954 x 6 500 9,804 x 8 500 10,704 x 10 500 11,004 x 12 500 12,204 x 14 500 12,754 x 16 500 13,654 x 18 500 14,504 x 20 500 15,604 x 22 500 16,004 x 25 500 18,654 x 30 500 21,35
Abmessung VPE Preis €
4 x 35 200 23,654 x 40 200 26,804 x 45 200 29,454 x 50 200 32,255 x 6 500 7,505 x 8 500 7,505 x 10 500 7,505 x 12 500 7,205 x 14 500 7,955 x 16 500 7,955 x 18 500 8,605 x 20 500 9,055 x 22 500 10,155 x 25 500 11,355 x 30 500 12,855 x 35 200 14,505 x 40 200 16,005 x 45 200 18,655 x 50 200 20,255 x 55 200 25,205 x 60 200 26,905 x 65 200 29,855 x 70 200 33,255 x 75 200 37,955 x 80 200 40,755 x 90 200 56,455 x 100 200 76,505 x 110 200 124,155 x 120 200 181,906 x 8 500 11,356 x 10 500 9,356 x 12 500 9,356 x 14 500 10,156 x 16 500 8,606 x 18 500 9,356 x 20 500 9,806 x 22 500 11,256 x 25 500 11,256 x 30 500 12,306 x 35 200 14,606 x 40 200 16,35
Abmessung VPE Preis €
6 x 45 200 18,106 x 50 200 19,506 x 55 200 22,256 x 60 200 24,006 x 65 200 27,356 x 70 200 27,356 x 75 200 30,956 x 80 200 36,106 x 90 200 39,456 x 100 100 44,806 x 110 100 68,656 x 120 100 76,308 x 10 200 34,458 x 12 200 34,458 x 14 200 34,458 x 16 200 14,958 x 18 200 17,108 x 20 200 17,108 x 22 200 18,858 x 25 200 18,858 x 30 200 21,158 x 35 200 24,208 x 40 200 26,158 x 45 100 27,708 x 50 100 30,958 x 55 100 33,558 x 60 100 36,108 x 65 100 41,958 x 70 100 44,808 x 75 100 47,658 x 80 100 50,158 x 85 50 52,958 x 90 50 55,508 x 100 50 61,158 x 110 50 136,808 x 120 50 138,858 x 130 50 211,558 x 140 50 231,408 x 160 50 231,408 x 180 50 565,6010 x 16 200 45,65
Seite 332 04 / 2019
Preise per 100 Stück
Zylinderschrauben mit Innensechskant
Hexagon socket head cap screws
db Hilfsmaßdk max.k max.s Nennmaß
M 318
5,683
2,5
M 420
7,2243
M 522
8,7254
M 624
10,2265
M 828
13,2786
M 1032
16,27108
M 1236
18,271210
M 1644
24,331614
M 2052
30,332017
M 2460
36,392419
M 2766
40,392719
M 3072
45,393022
brüniertISO 4762
künftig ISO / EN
12.9
Vis à six pans creux, tête cylindrique
-
Abmessung VPE Preis €
10 x 18 200 45,6510 x 20 200 29,5510 x 22 200 31,9510 x 25 200 31,9510 x 30 200 37,9510 x 35 100 37,9510 x 40 100 41,6510 x 45 100 50,1510 x 50 100 50,1510 x 55 100 53,6510 x 60 100 58,0010 x 65 100 61,7010 x 70 100 69,0010 x 80 100 75,8510 x 90 50 87,7510 x 100 50 98,4510 x 110 50 105,3010 x 120 50 121,0010 x 130 50 129,7010 x 140 50 158,6010 x 150 50 186,1510 x 160 50 227,5010 x 170 50 236,9510 x 180 50 236,9510 x 200 50 266,4012 x 20 100 45,8012 x 25 100 45,8012 x 30 100 50,4512 x 35 100 54,1512 x 40 100 58,6512 x 45 100 63,3512 x 50 100 69,0012 x 55 100 70,8512 x 60 100 81,5512 x 65 50 88,4012 x 70 50 98,4512 x 75 50 98,4512 x 80 50 102,8012 x 90 50 121,0012 x 100 50 125,3512 x 110 50 136,05
Abmessung VPE Preis €
12 x 120 50 157,3012 x 130 50 179,8512 x 140 50 198,0512 x 150 50 233,8012 x 160 25 256,3512 x 170 25 273,9012 x 180 25 273,9014 x 25 100 65,2014 x 30 100 71,5014 x 35 100 95,9014 x 40 100 95,9014 x 45 100 92,7514 x 50 100 100,9514 x 60 100 114,6514 x 65 50 122,2014 x 70 50 129,7014 x 80 50 146,7014 x 90 50 171,8014 x 100 50 188,7014 x 110 50 205,5514 x 120 50 223,1016 x 30 50 96,1516 x 35 50 98,6516 x 40 50 100,6016 x 45 50 113,4516 x 50 50 126,0016 x 55 50 132,8516 x 60 50 141,7016 x 65 25 149,7516 x 70 25 162,9516 x 80 25 175,5016 x 90 25 197,4016 x 100 25 202,7516 x 110 25 224,4516 x 120 25 275,1016 x 130 25 338,4516 x 140 25 338,4516 x 150 25 363,5016 x 160 25 413,6516 x 170 25 438,7516 x 180 25 457,60
Abmessung VPE Preis €
16 x 190 25 485,7016 x 200 25 642,4518 x 45 50 157,3018 x 50 50 229,4518 x 55 25 229,4518 x 60 25 229,4518 x 70 25 273,2518 x 80 25 273,2518 x 90 25 316,5518 x 100 25 385,4018 x 110 25 385,4018 x 120 25 451,2520 x 35 25 180,5020 x 40 25 191,2020 x 45 25 204,4020 x 50 25 216,9020 x 55 25 227,5020 x 60 25 245,7020 x 65 25 282,1020 x 70 25 313,4020 x 75 25 348,8020 x 80 25 344,7520 x 90 25 376,0520 x 100 25 369,8520 x 110 25 407,4520 x 120 25 441,9020 x 130 25 501,4020 x 140 25 532,8020 x 150 25 567,2520 x 160 10 636,1020 x 170 10 670,7020 x 180 10 701,9520 x 190 10 745,9020 x 200 10 846,1524 x 50 25 423,0524 x 55 25 445,0524 x 60 25 460,6524 x 65 25 485,7024 x 70 25 504,5524 x 75 25 531,2024 x 80 25 557,85
Preise per 100 Stück
04 / 2019 Seite 333
Zylinderschrauben mit Innensechskant
Hexagon socket head cap screws
db Hilfsmaßdk max.k max.s Nennmaß
M 318
5,683
2,5
M 420
7,2243
M 522
8,7254
M 624
10,2265
M 828
13,2786
M 1032
16,27108
M 1236
18,271210
M 1644
24,331614
M 2052
30,332017
M 2460
36,392419
M 2766
40,392719
M 3072
45,393022
brüniertISO 4762
künftig ISO / EN
12.9
Vis à six pans creux, tête cylindrique
-
Abmessung VPE Preis €
24 x 90 10 598,5024 x 100 10 645,6024 x 110 10 720,8024 x 120 10 783,5024 x 130 10 817,9524 x 140 10 880,6024 x 150 10 921,4024 x 160 10 980,9030 x 70 10 959,0030 x 80 10 1065,5030 x 90 10 1125,0030 x 100 10 1253,5030 x 110 10 1441,5530 x 120 10 1516,7530 x 130 10 2123,9530 x 140 10 2250,9530 x 150 10 2356,7030 x 160 10 2430,8030 x 170 10 2652,9530 x 180 10 2652,9530 x 200 10 2845,3530 x 220 10 3001,9530 x 240 10 3226,2030 x 260 10 3435,7030 x 280 10 3678,8530 x 300 10 3919,4036 x 100 5 2951,2036 x 110 5 3057,0036 x 120 5 3210,7036 x 130 5 3295,3036 x 140 5 3419,4536 x 150 5 3549,1536 x 160 5 3678,8536 x 170 5 3956,0536 x 180 5 3956,0536 x 200 5 4231,0536 x 220 5 4508,9036 x 240 5 4791,6536 x 260 5 5032,85
Seite 334 04 / 2019
Preise per 100 Stück
Zylinderschrauben mit Innensechskant
Hexagon socket head cap screws
db Hilfsmaßdk max.k max.s Nennmaß
M 318
5,683
2,5
M 420
7,2243
M 522
8,7254
M 624
10,2265
M 828
13,2786
M 1032
16,27108
M 1236
18,271210
M 1644
24,331614
M 2052
30,332017
M 2460
36,392419
verz. blauISO 4762
künftig ISO / EN
12.9
Vis à six pans creux, tête cylindrique
-
Abmessung VPE Preis €
2,0 x 4 500 19,502,0 x 5 500 19,502,0 x 6 500 20,402,0 x 8 500 20,402,0 x 10 500 21,352,0 x 12 500 23,102,5 x 4 500 20,402,5 x 5 500 20,402,5 x 6 500 22,152,5 x 8 500 22,252,5 x 10 500 23,852,5 x 12 500 25,952,5 x 16 500 27,80
Preise per 100 Stück
04 / 2019 Seite 335
Zylinderschrauben mit Innensechskant, A2
Hexagon socket head cap screws
db Hilfsmaßdk max.k max.s Nennmaß
M 318
5,683
2,5
M 420
7,2243
M 522
8,7254
M 624
10,2265
M 828
13,2786
M 1032
16,27108
M 1236
18,271210
M 1644
24,331614
M 2052
30,332017
M 2460
36,392419
blankISO 4762
künftig ISO / EN
A2
Vis à six pans creux, tête cylindrique
-
Abmessung VPE Preis €
2,0x 4 1000 26,902,0x 5 1000 26,902,0x 6 1000 26,902,0x 8 1000 26,902,0x 10 1000 27,902,0x 12 1000 29,452,0x 14 1000 41,852,0x 16 1000 33,602,0x 18 1000 50,102,0x 20 1000 40,302,5 x 4 1000 26,902,5 x 5 1000 26,902,5 x 6 1000 26,902,5 x 8 1000 26,902,5 x 10 1000 27,902,5 x 12 1000 29,452,5 x 14 1000 41,852,5 x 16 1000 33,602,5 x 18 1000 50,102,5 x 20 1000 40,303 x 4 1000 16,053 x 5 1000 13,953 x 6 1000 12,403 x 8 1000 11,403 x 10 1000 9,853 x 12 1000 9,853 x 14 1000 10,353 x 16 1000 8,303 x 18 1000 10,853 x 20 1000 8,803 x 22 500 10,853 x 25 500 8,803 x 30 500 10,853 x 35 500 11,903 x 40 500 12,953 x 45 500 27,403 x 50 500 27,404 x 5 500 21,704 x 6 500 12,954 x 8 500 11,904 x 10 500 9,85
Abmessung VPE Preis €
4 x 12 500 9,854 x 14 500 10,354 x 16 500 8,304 x 18 500 10,854 x 20 500 8,804 x 22 500 10,854 x 25 500 8,804 x 30 500 10,854 x 35 200 11,904 x 35/35 200 11,904 x 40 200 12,954 x 45 200 27,404 x 50 200 27,405 x 6 500 20,655 x 8 500 12,955 x 10 500 11,905 x 12 500 11,905 x 14 500 11,405 x 16 500 9,305 x 18 500 11,905 x 20 500 9,855 x 22 500 13,455 x 25 500 10,855 x 30 500 12,405 x 35 200 13,455 x 40 200 15,005 x 45 200 16,055 x 50 200 18,105 x 55 200 19,655 x 60 100 21,705 x 70 100 25,855 x 80 100 67,156 x 8 500 17,056 x 10 500 15,506 x 12 500 15,506 x 14 500 15,506 x 16 500 12,406 x 18 500 16,556 x 20 500 13,456 x 22 200 18,106 x 25 200 14,50
Abmessung VPE Preis €
6 x 30 200 15,506 x 35 200 17,556 x 40 200 19,156 x 45 100 22,756 x 45/45 100 22,756 x 50 100 25,306 x 55 100 29,956 x 60 100 31,506 x 65 100 48,056 x 70 100 38,756 x 70/70 100 38,756 x 75 100 57,856 x 80 100 46,506 x 90 100 60,506 x 100 100 90,006 x 110 100 76,006 x 120 100 103,256 x 130 100 111,006 x 140 100 119,006 x 150 100 127,258 x 10 200 28,958 x 12 200 28,958 x 14 200 29,958 x 16 200 24,308 x 18 200 28,958 x 20 200 23,258 x 22 200 26,908 x 25 200 21,708 x 30 200 23,258 x 35 200 24,808 x 40 200 27,408 x 45 100 32,058 x 50 100 35,658 x 55 100 42,358 x 60 100 47,008 x 65 100 80,058 x 70 100 64,058 x 75 100 104,358 x 80 100 83,708 x 90 100 90,908 x 100 50 101,25
Seite 336 04 / 2019
Preise per 100 Stück
Zylinderschrauben mit Innensechskant, A2
Hexagon socket head cap screws
db Hilfsmaßdk max.k max.s Nennmaß
M 318
5,683
2,5
M 420
7,2243
M 522
8,7254
M 624
10,2265
M 828
13,2786
M 1032
16,27108
M 1236
18,271210
M 1644
24,331614
M 2052
30,332017
M 2460
36,392419
blankISO 4762
künftig ISO / EN
A2
Vis à six pans creux, tête cylindrique
-
Abmessung VPE Preis €
8 x 110 50 122,508 x 120 50 144,008 x 130 50 175,758 x 140 50 188,258 x 150 50 235,0010 x 16 100 42,9010 x 20 100 40,3010 x 25 100 37,2010 x 30 100 39,2510 x 35 100 40,8010 x 40 100 43,4010 x 45 100 51,6510 x 50 50 54,7510 x 55 50 63,0010 x 60 50 67,1510 x 65 50 100,7010 x 70 50 80,6010 x 75 50 119,3010 x 80 50 95,5510 x 90 50 109,5010 x 100 50 180,0010 x 110 50 195,0010 x 120 50 212,5010 x 130 50 262,0010 x 140 50 280,0010 x 150 50 315,0012 x 16 50 81,1012 x 20 50 59,4012 x 25 50 55,3012 x 30 50 55,8012 x 35 50 59,9012 x 40 50 65,1012 x 45 50 72,3012 x 50 50 76,9512 x 55 50 87,3012 x 60 50 92,4512 x 65 50 128,1012 x 70 50 102,8012 x 75 50 162,7012 x 80 25 130,1512 x 90 25 150,30
Abmessung VPE Preis €
12 x 100 25 177,6512 x 110 25 257,5012 x 120 25 287,5012 x 130 25 310,0012 x 140 25 340,0012 x 150 25 375,0014 x 20 50 542,2514 x 25 50 408,0014 x 30 50 330,5014 x 35 50 330,5014 x 40 50 330,5014 x 45 50 356,3514 x 50 50 387,3014 x 55 50 423,4514 x 60 50 444,1514 x 65 50 599,0514 x 70 50 500,9514 x 75 50 707,5014 x 80 50 588,7014 x 90 50 686,8514 x 100 50 779,8014 x 110 25 1115,4514 x 120 25 1208,4014 x 130 25 1394,3014 x 140 25 1580,2014 x 150 25 1766,1516 x 20 25 330,5016 x 25 25 229,3016 x 30 25 185,9516 x 35 25 185,9516 x 40 25 185,9516 x 45 25 198,3016 x 50 25 216,9016 x 55 25 235,5016 x 60 25 247,9016 x 65 25 330,5016 x 70 25 278,9016 x 75 25 393,5016 x 80 25 328,4516 x 90 25 384,2016 x 100 25 433,80
Abmessung VPE Preis €
16 x 110 25 743,6516 x 120 25 805,6016 x 130 25 929,5516 x 140 25 1053,5016 x 150 25 1177,4518 x 40 25 333,1018 x 45 25 666,2018 x 50 25 666,2018 x 55 25 733,3018 x 60 25 759,1518 x 65 25 1007,0018 x 70 25 841,7518 x 80 25 991,5018 x 90 25 1239,4018 x 100 25 1487,2518 x 110 25 2045,0018 x 120 25 2339,3518 x 130 25 2943,5018 x 140 25 3206,9018 x 150 25 3459,9520 x 40 25 421,4020 x 45 25 421,4020 x 50 25 421,4020 x 55 25 452,4020 x 60 25 477,1520 x 65 25 630,0520 x 70 25 526,7520 x 75 25 743,6520 x 80 25 619,7020 x 90 25 774,6520 x 100 25 929,5520 x 110 25 1487,2520 x 120 25 1673,2020 x 130 25 2106,9520 x 140 25 2292,8520 x 150 25 2478,7524 x 40 10 1487,2524 x 45 10 1487,2524 x 50 10 1487,2524 x 55 10 1487,2524 x 60 10 1487,25
Preise per 100 Stück
04 / 2019 Seite 337
Zylinderschrauben mit Innensechskant, A2
Hexagon socket head cap screws
db Hilfsmaßdk max.k max.s Nennmaß
M 318
5,683
2,5
M 420
7,2243
M 522
8,7254
M 624
10,2265
M 828
13,2786
M 1032
16,27108
M 1236
18,271210
M 1644
24,331614
M 2052
30,332017
M 2460
36,392419
blankISO 4762
künftig ISO / EN
A2
Vis à six pans creux, tête cylindrique
-
Abmessung VPE Preis €
24 x 65 10 1611,2024 x 70 10 1611,2024 x 75 10 1735,1524 x 80 10 1735,1524 x 90 10 1921,0524 x 100 10 2106,9524 x 110 10 2292,8524 x 120 10 2478,7524 x 130 10 2664,6524 x 140 10 2840,2524 x 150 10 3098,4527 x 50 10 2685,3527 x 60 10 2736,9527 x 70 10 2891,9027 x 80 10 3098,4527 x 90 10 3253,3527 x 100 10 3459,9527 x 110 10 3614,8527 x 120 10 1884,9027 x 130 10 1936,5527 x 140 10 2014,0027 x 150 10 2091,4530 x 50 10 1497,6030 x 60 10 1523,4030 x 70 10 1626,7030 x 80 10 1704,1530 x 90 10 1807,4530 x 100 10 1884,9030 x 110 10 1988,1530 x 120 10 2065,6530 x 130 10 2168,9030 x 140 10 2246,4030 x 150 10 2349,65
Seite 338 04 / 2019
Preise per 100 Stück
Scheiben
Washers
d1d2sfür Schrauben
2,25
0,3M 2
2,76
0,5M 2,5
3,27
0,5M 3
4,39
0,8M 4
5,3101
M 5
6,4121,6
M 6
8,4161,6
M 8
10,5202
M 10
13,0242,5
M 12
15,0282,5
M 14
17,0303
M 16
19,0343
M 18
21,0373
M 20
23,0393
M 22
25,0444
M 24
blankISO 7089
künftig ISO / EN
HV200
Rondelles
-
Abmessung VPE Preis €
d 1,6 1000 3,50d 2 1000 0,75d 2,5 1000 0,75d 6 1000 1,60d 3,5 1000 1,30d 4 1000 1,60d 5 1000 1,70d 6 1000 2,55d 8 1000 3,55d 10 500 5,70d 12 500 9,10d 14 200 8,70d 16 200 15,25d 18 200 18,10d 20 200 18,55d 22 200 23,85d 24 100 34,25d 27 50 65,05d 30 50 73,45d 33 10 112,70d 36 50 138,55d 39 10 160,55d 42 10 278,95d 45 10 380,00d 48 10 433,50d 52 10 720,50
Preise per 100 Stück
04 / 2019 Seite 339
Scheiben
Washers
d1d2sfür Schrauben
2,25
0,3M 2
2,76
0,5M 2,5
3,27
0,5M 3
4,39
0,8M 4
5,3101
M 5
6,4121,6
M 6
8,4161,6
M 8
10,5202
M 10
13,0242,5
M 12
15,0282,5
M 14
17,0303
M 16
19,0343
M 18
21,0373
M 20
23,0393
M 22
25,0444
M 24
verz. blauISO 7089
künftig ISO / EN
HV200
Rondelles
-
Abmessung VPE Preis €
d 1,6 1000 3,70d 2 1000 0,95d 2,5 1000 0,95d 3 1000 1,30d 3 200 1,80d 3,5 1000 1,30d 4 1000 1,30d 4 200 1,80d 5 1000 1,40d 5 200 1,90d 6 1000 2,35d 6 200 2,85d 7 1000 2,95d 8 1000 3,25d 8 200 3,75d 10 500 5,55d 10 200 6,05d 12 500 8,85d 12 200 9,05d 14 200 11,10d 16 200 16,35d 18 200 22,25d 20 200 23,35d 22 200 29,10d 24 100 43,20d 27 50 76,85d 30 50 88,60d 33 50 127,50d 36 50 161,05d 39 25 200,55
Seite 340 04 / 2019
Preise per 100 Stück
Scheiben Form A feuerverzinkt
Washers
d1d2sfür Schrauben
2,25
0,3M 2
2,76
0,5M 2,5
3,27
0,5M 3
4,39
0,8M 4
5,3101
M 5
6,4121,6
M 6
8,4161,6
M 8
10,5202
M 10
13242,5
M 12
15282,5
M 14
17303
M 16
19343
M 18
21373
M 20
23393
M 22
25444
M 24
tznISO 7089
künftig ISO / EN
HV200
Rondelles
-
Abmessung VPE Preis €
d 8 1000 7,30d 10 500 9,05d 12 500 14,15d 16 200 25,45d 21 200 35,85d 24 100 81,70
Preise per 100 Stück
04 / 2019 Seite 341
Linsenschrauben mit Innensechskant
Button head socket screws MLS
ddk max.k max.s
M 35,7
1,652
M 47,62,22,5
M 59,5
2,753
M 610,53,3
4
M 8144,4
5
M 1017,55,5
6
M 12216,6
8
brüniertISO 7380-1
künftig ISO / EN
10.9
Vis à six pans creux tête bombée MLS
-
Abmessung VPE Preis €
3 x 4 500 6,103 x 5 500 5,503 x 6 500 4,603 x 8 500 4,003 x 10 500 4,603 x 12 500 4,903 x 16 500 6,103 x 20 500 6,204 x 6 500 6,704 x 8 500 6,704 x 10 500 6,804 x 12 500 6,804 x 16 500 7,804 x 20 500 9,604 x 25 500 11,904 x 30 500 13,905 x 6 500 8,405 x 8 500 8,005 x 10 500 8,205 x 12 500 8,105 x 16 500 10,405 x 20 500 11,005 x 25 500 13,305 x 30 500 14,906 x 6 500 12,606 x 8 500 10,306 x 10 500 11,306 x 12 500 11,406 x 16 500 12,506 x 20 500 13,306 x 25 500 16,006 x 30 500 20,006 x 35 200 23,906 x 40 200 23,606 x 45 200 28,806 x 50 200 32,008 x 10 200 17,508 x 12 200 17,308 x 16 200 17,408 x 20 200 21,408 x 25 200 23,90
Abmessung VPE Preis €
8 x 30 200 27,008 x 35 200 31,508 x 40 200 33,408 x 45 200 38,108 x 50 200 43,8010 x 16 200 26,4010 x 20 200 33,8010 x 25 200 34,1010 x 35 100 49,80
Seite 342 04 / 2019
Preise per 100 Stück
Linsenschrauben mit Innensechskant
Button head socket screws MLS
ddk max.k max.s
M 35,7
1,652
M 47,62,22,5
M 59,5
2,753
M 610,53,3
4
M 8144,4
5
M 1017,55,5
6
M 12216,6
8
verz. blauISO 7380-1
künftig ISO / EN
10.9
Vis à six pans creux tête bombée MLS
-
Abmessung VPE Preis €
3 x 4 500 6,603 x 5 500 5,303 x 6 500 5,303 x 8 500 5,003 x 10 500 5,603 x 12 500 6,203 x 16 500 6,603 x 20 500 7,703 x 30 500 11,004 x 5 500 7,604 x 6 500 7,404 x 8 500 6,804 x 10 500 7,604 x 12 500 8,004 x 16 500 9,504 x 20 500 11,004 x 25 500 13,104 x 30 500 17,904 x 35 500 18,905 x 6 500 11,905 x 8 500 10,605 x 10 500 10,405 x 12 500 12,505 x 14 500 13,305 x 16 500 13,605 x 20 500 15,405 x 25 500 19,905 x 30 500 20,905 x 35 200 27,405 x 40 200 30,006 x 6 500 13,806 x 8 500 11,506 x 10 500 11,806 x 12 500 12,806 x 14 500 13,106 x 16 500 13,806 x 18 500 14,906 x 20 500 16,806 x 25 500 18,906 x 30 500 21,206 x 35 200 24,80
Abmessung VPE Preis €
6 x 40 200 28,006 x 45 200 30,706 x 50 200 35,106 x 60 200 43,608 x 8 200 24,708 x 12 200 18,208 x 12 200 20,608 x 14 200 20,208 x 16 200 21,008 x 18 200 25,808 x 20 200 24,708 x 25 200 28,008 x 30 200 31,608 x 35 200 36,708 x 40 200 45,308 x 45 200 50,908 x 50 200 49,608 x 55 200 57,808 x 60 200 60,108 x 70 200 66,9010 x 16 200 33,6010 x 20 200 41,2010 x 25 200 46,2010 x 30 200 46,2010 x 35 100 56,7012 x 25 100 62,6012 x 30 100 69,80
Preise per 100 Stück
04 / 2019 Seite 343
Linsenschrauben mit Innensechskant
Button head socket screws MLS
ddk max.k max.s
M 35,7
1,652
M 47,62,22,5
M 59,5
2,753
M 610,53,3
4
M 8144,4
5
M 1017,55,5
6
M 12216,6
8
blankISO 7380-1
künftig ISO / EN
A2
Vis à six pans creux tête bombée MLS
-
Abmessung VPE Preis €
3 x 4 1000 7,903 x 5 1000 7,903 x 6 1000 7,903 x 8 1000 8,303 x 10 1000 8,403 x 12 1000 8,503 x 16 1000 9,503 x 20 1000 10,504 x 6 500 8,304 x 8 500 8,304 x 10 500 8,304 x 12 500 8,804 x 16 500 9,304 x 18 500 11,104 x 20 500 11,104 x 25 500 11,904 x 30 500 13,004 x 40 200 14,005 x 6 500 9,505 x 8 500 9,505 x 10 500 8,805 x 12 500 9,405 x 14 500 14,005 x 16 500 10,305 x 20 500 11,405 x 25 200 12,405 x 30 200 13,605 x 35 200 18,005 x 40 200 20,006 x 8 500 12,706 x 10 500 12,906 x 12 500 13,106 x 14 200 14,706 x 16 200 14,706 x 18 200 16,006 x 20 500 16,006 x 25 500 18,106 x 30 500 20,206 x 35 200 20,706 x 40 200 22,706 x 45 100 24,80
Abmessung VPE Preis €
6 x 50 100 27,308 x 10 500 34,608 x 12 500 35,108 x 16 200 37,508 x 20 200 42,608 x 25 200 48,608 x 30 200 53,708 x 35 100 59,808 x 40 100 65,908 x 45 100 72,808 x 50 100 80,6010 x 20 100 52,6010 x 25 100 53,1010 x 30 100 53,6010 x 35 100 54,0010 x 50 100 72,00
Seite 344 04 / 2019
Preise per 100 Stück
Linsen-Flanschkopfschraube mit Innensechskant
Flange button head socket screws
da max.k max.s
M 36,9
1,652
M 49,42,22,5
M 511,82,75
3
M 613,63,3
4
M 817,84,4
5
M 1021,95,5
6
brüniertISO 7380-2
künftig ISO / EN
10.9
Vis à six pans creux, tête bombée avec rondelle in
-
Abmessung VPE Preis €
3 x 6 500 6,403 x 8 500 6,703 x 10 500 6,703 x 12 500 10,303 x 14 500 12,003 x 16 500 10,903 x 20 500 11,704 x 6 500 8,304 x 8 500 7,104 x 10 500 7,804 x 12 500 8,304 x 16 500 10,204 x 20 500 11,004 x 25 500 13,104 x 30 500 14,505 x 8 500 10,905 x 10 500 9,505 x 12 500 12,105 x 16 500 13,005 x 20 500 14,405 x 25 500 18,405 x 30 200 22,006 x 8 500 12,006 x 10 500 12,506 x 12 500 12,606 x 14 500 13,006 x 16 500 13,706 x 20 500 15,606 x 25 500 18,206 x 30 500 22,406 x 35 200 24,006 x 40 200 26,008 x 10 200 18,508 x 12 200 19,708 x 16 200 21,908 x 20 200 23,808 x 25 200 28,908 x 30 200 30,608 x 35 200 35,008 x 40 200 40,0010 x 12 200 55,30
Abmessung VPE Preis €
10 x 16 200 31,3010 x 20 200 38,6010 x 25 200 38,2010 x 30 200 49,0010 x 35 100 46,4010 x 40 100 56,60
Preise per 100 Stück
04 / 2019 Seite 345
Linsen-Flanschkopfschraube mit Innensechskant
Flange button head socket screws
da max.k max.s
M 36,9
1,652
M 49,42,22,5
M 511,82,75
3
M 613,63,3
4
M 817,84,4
5
M 1021,95,5
6
verz. blauISO 7380-2
künftig ISO / EN
10.9
Vis à six pans creux, tête bombée avec rondelle in
-
Abmessung VPE Preis €
3 x 4 500 17,103 x 6 500 5,803 x 8 500 6,203 x 10 500 7,103 x 12 500 7,103 x 16 500 14,503 x 20 500 15,604 x 6 500 8,404 x 8 500 8,004 x 10 500 8,804 x 12 500 8,504 x 14 500 14,504 x 16 500 9,704 x 18 500 17,404 x 20 500 12,604 x 22 500 17,404 x 25 500 16,004 x 30 500 16,405 x 6 500 11,605 x 8 500 10,705 x 10 500 10,105 x 12 500 10,905 x 16 500 12,405 x 20 500 14,505 x 25 500 15,505 x 30 500 19,505 x 35 200 24,206 x 6 500 15,606 x 8 500 14,206 x 10 500 14,906 x 12 500 14,506 x 14 500 15,606 x 16 500 17,606 x 20 500 17,806 x 25 500 20,406 x 30 500 23,006 x 35 200 26,706 x 40 200 34,506 x 50 200 38,408 x 10 200 22,408 x 12 200 24,60
Abmessung VPE Preis €
8 x 16 200 22,808 x 20 200 25,808 x 25 200 30,308 x 30 200 34,708 x 35 200 37,108 x 40 200 40,908 x 50 200 54,808 x 55 200 57,408 x 60 200 57,2010 x 16 200 38,5010 x 20 200 45,0010 x 25 200 50,0010 x 30 200 51,7010 x 35 100 59,1010 x 40 100 67,0010 x 50 100 83,90
Seite 346 04 / 2019
Preise per 100 Stück
Linsen-Flanschkopfschraube mit Innensechskant
Flange button head socket screws
da max.k max.s
M 36,9
1,652
M 49,42,22,5
M 511,82,75
3
M 613,63,3
4
M 817,84,4
5
M 1021,95,5
6
blankISO 7380-2
künftig ISO / EN
A2
Vis à six pans creux, tête bombée avec rondelle in
-
Abmessung VPE Preis €
3 x 4 1000 15,553 x 6 1000 15,553 x 8 1000 15,653 x 10 1000 14,003 x 10 1000 15,003 x 16 1000 16,004 x 5 1000 15,054 x 6 1000 15,054 x 8 1000 13,654 x 10 1000 13,804 x 12 1000 13,804 x 16 1000 11,004 x 20 500 11,905 x 6 500 16,855 x 8 500 16,855 x 10 500 15,005 x 12 500 15,005 x 14 500 14,055 x 16 500 12,205 x 18 500 12,905 x 20 500 13,505 x 25 200 13,755 x 30 200 14,405 x 35 200 15,005 x 40 200 16,056 x 8 500 21,206 x 10 500 18,756 x 12 500 18,756 x 14 200 17,656 x 16 200 15,006 x 20 200 16,606 x 25 200 17,506 x 30 200 18,756 x 35 200 20,956 x 40 200 23,456 x 45 100 27,006 x 50 100 53,658 x 8 500 37,808 x 10 500 35,508 x 12 500 28,608 x 16 200 28,80
Abmessung VPE Preis €
8 x 20 200 27,258 x 25 100 25,658 x 30 100 27,258 x 35 100 29,458 x 40 100 32,558 x 50 100 42,2510 x 25 100 45,0010 x 30 100 53,6510 x 50 50 63,00
Preise per 100 Stück
04 / 2019 Seite 347
Spiral-Spannstifte schwere Ausführung
Spiral pins, heavy duty
d1 Nennmaßasd1 min. - vor demd2 max. - vor de
1,50,5
0,171,61,4
20,7
0,222,11,9
2,50,8
0,282,6
2,35
31
0,333,122,85
41,3
0,454,153,8
51,7
0,565,154,8
62
0,676,255,8
83
0,788,357,75
brüniertISO 8748
künftig ISO / EN
Stahl
Goupilles élastiques, lourdes
-
Abmessung VPE Preis €
2 x 8 3000 5,602 x 10 3000 5,602 x 12 3000 5,802 x 14 3000 5,802 x 16 3000 6,002 x 18 3000 6,102 x 20 3000 6,102,5 x 10 3000 5,952,5 x 12 3000 6,102,5 x 14 3000 7,002,5 x 16 3000 6,103 x 8 3000 6,503 x 10 3000 6,853 x 12 3000 6,853 x 14 3000 7,003 x 16 3000 7,353 x 18 3000 7,353 x 20 3000 7,603 x 22 3000 7,753 x 22 3000 7,853 x 22 3000 8,203 x 22 3000 8,353 x 22 3000 8,653 x 22 3000 8,954 x 10 1000 8,204 x 12 1000 8,354 x 14 1000 8,354 x 16 1000 8,554 x 18 1000 8,854 x 20 1000 8,954 x 22 1000 8,554 x 24 1000 9,554 x 26 1000 10,154 x 28 1000 10,654 x 30 1000 11,104 x 32 1000 11,504 x 36 1000 12,704 x 40 1000 13,555 x 12 1000 9,555 x 14 1000 9,905 x 16 1000 10,30
Abmessung VPE Preis €
5 x 18 1000 10,505 x 20 1000 11,105 x 22 1000 11,905 x 24 1000 12,605 x 26 1000 13,455 x 28 1000 14,055 x 30 1000 14,755 x 32 1000 15,655 x 36 1000 17,105 x 40 1000 18,305 x 45 1000 20,405 x 50 1000 22,256 x 14 1000 13,856 x 16 1000 15,056 x 18 1000 16,156 x 20 1000 17,606 x 22 1000 18,806 x 24 1000 20,056 x 26 1000 21,356 x 28 1000 22,756 x 30 1000 23,956 x 32 1000 25,056 x 36 1000 27,756 x 40 1000 30,306 x 45 1000 33,456 x 50 1000 36,908 x 20 500 80,008 x 30 500 85,608 x 32 500 86,208 x 36 500 90,008 x 40 500 105,758 x 45 500 106,208 x 50 500 106,708 x 55 500 110,858 x 60 500 119,05
Seite 348 04 / 2019
Preise per 100 Stück
Spiral-Spannstifte Regelausführung
Spiral pins, medium duty
d1 Nennmaßasd1 min. - vor demd2 max. - vor de
1,50,5
0,131,621,4
20,7
0,172,151,9
2,50,8
0,212,652,35
31
0,253,152,85
3,51,2
0,293,673,35
41,3
0,334,23,8
51,7
0,425,254,8
62
0,56,255,8
83
0,678,357,75
103
0,8410,45
9,6
1241
12,511,5
144,51,2
14,5513,5
brüniertISO 8750
künftig ISO / EN
Stahl
Goupilles élastiques
-
Abmessung VPE Preis €
1,5 x 4 3000 4,701,5 x 6 3000 4,701,5 x 8 3000 4,901,5 x 10 3000 4,901,5 x 12 3000 4,901,5 x 14 3000 5,001,5 x 16 3000 5,302 x 6 3000 5,052 x 8 3000 5,302 x 10 3000 5,302 x 12 3000 5,302 x 14 3000 5,302 x 16 3000 5,402 x 18 3000 5,402 x 20 3000 5,902,5 x 6 3000 5,402,5 x 8 3000 5,502,5 x 10 3000 5,602,5 x 12 3000 5,602,5 x 14 3000 5,602,5 x 16 3000 5,902,5 x 18 3000 5,902,5 x 20 3000 6,003 x 8 3000 5,953 x 10 3000 6,003 x 12 3000 6,103 x 14 3000 6,103 x 16 3000 6,303 x 18 3000 6,553 x 20 3000 6,753 x 22 3000 6,903 x 24 3000 7,103 x 26 3000 7,303 x 28 3000 7,653 x 30 3000 8,104 x 8 1000 7,254 x 10 1000 7,404 x 12 1000 7,454 x 14 1000 7,754 x 16 1000 7,854 x 18 1000 7,95
Abmessung VPE Preis €
4 x 20 1000 8,304 x 22 1000 8,504 x 24 1000 8,604 x 26 1000 8,854 x 28 1000 9,304 x 30 1000 9,654 x 32 1000 10,404 x 36 1000 10,804 x 40 1000 11,904 x 45 1000 12,905 x 10 1000 8,655 x 12 1000 9,055 x 14 1000 9,505 x 16 1000 10,055 x 18 1000 10,555 x 20 1000 10,955 x 22 1000 11,355 x 24 1000 11,905 x 26 1000 12,355 x 28 1000 12,955 x 30 1000 13,205 x 32 1000 13,705 x 36 1000 14,555 x 40 1000 15,405 x 45 1000 16,905 x 50 1000 18,005 x 60 1000 21,906 x 12 500 12,206 x 14 500 12,706 x 16 500 13,556 x 18 500 14,456 x 20 500 15,656 x 22 500 16,756 x 24 500 17,806 x 26 500 18,956 x 28 500 20,156 x 30 500 21,256 x 32 500 22,306 x 36 500 23,756 x 40 500 25,106 x 45 500 28,00
Abmessung VPE Preis €
6 x 50 500 30,258 x 16 500 23,358 x 18 500 24,808 x 20 500 26,658 x 22 500 28,308 x 24 500 30,208 x 26 500 32,358 x 30 500 37,458 x 32 500 39,808 x 36 500 42,258 x 40 500 44,958 x 45 500 49,808 x 50 500 53,25
Preise per 100 Stück
04 / 2019 Seite 349
Spannstifte (Spannhülsen) schwere Ausführung
Spring type straight pins, slotted, heavy type
Nenndurchmessad1 min. - vor demd1 max. - vor de
20,352,31,5
2,50,42,81,8
30,53,32,1
3,50,63,82,3
40,654,42,8
50,95,43,4
61,26,43,9
82
8,55,5
102
10,56,5
122
12,57,5
brüniertISO 8752
künftig ISO / EN
Stahl
Goupilles élastiques série épaisse
-
Abmessung VPE Preis €
1 x 4 1000 4,351 x 5 1000 4,501 x 6 1000 4,501 x 8 1000 4,601 x 10 1000 4,751 x 12 1000 4,751 x 14 1000 4,851 x 16 1000 5,051 x 18 1000 5,251 x 20 1000 5,451,5 x 4 1000 3,701,5 x 5 1000 3,801,5 x 6 1000 3,851,5 x 8 1000 3,901,5 x 10 1000 4,001,5 x 12 1000 4,001,5 x 14 1000 4,051,5 x 16 1000 4,201,5 x 18 1000 4,451,5 x 20 1000 4,752 x 4 1000 3,802 x 5 1000 4,002 x 6 1000 4,052 x 8 1000 4,102 x 10 1000 4,102 x 12 1000 4,202 x 14 1000 4,202 x 16 1000 4,302 x 18 1000 4,302 x 20 1000 4,752 x 22 1000 4,852 x 24 1000 4,952 x 26 1000 5,252 x 28 1000 5,452 x 30 1000 5,802,5 x 4 1000 4,202,5 x 5 1000 4,302,5 x 6 1000 4,302,5 x 8 1000 4,352,5 x 10 1000 4,452,5 x 12 1000 4,45
Abmessung VPE Preis €
2,5 x 14 1000 4,502,5 x 16 1000 4,002,5 x 18 1000 4,752,5 x 20 1000 4,852,5 x 22 1000 4,852,5 x 24 1000 5,252,5 x 26 1000 5,452,5 x 28 1000 5,802,5 x 30 1000 6,103 x 4 1000 4,453 x 5 1000 4,503 x 6 1000 4,753 x 8 1000 4,753 x 10 1000 4,853 x 12 1000 4,853 x 14 1000 4,853 x 16 1000 5,053 x 18 1000 5,253 x 20 1000 5,403 x 22 1000 5,453 x 24 1000 5,603 x 26 1000 5,803 x 28 1000 6,103 x 30 1000 6,403 x 32 1000 6,753 x 36 1000 7,303 x 40 1000 8,003,5 x 4 1000 5,453,5 x 5 1000 5,503,5 x 6 1000 5,553,5 x 8 1000 5,703,5 x 10 1000 5,803,5 x 12 1000 5,803,5 x 14 1000 6,053,5 x 16 1000 6,103,5 x 18 1000 6,253,5 x 20 1000 6,403,5 x 22 1000 6,553,5 x 24 1000 6,753,5 x 26 1000 6,803,5 x 28 1000 7,30
Abmessung VPE Preis €
3,5 x 30 1000 7,603,5 x 32 1000 8,003,5 x 36 1000 8,453,5 x 40 1000 9,304 x 4 500 5,504 x 5 500 5,504 x 6 500 5,554 x 8 500 5,704 x 10 500 5,804 x 12 500 5,804 x 14 500 6,054 x 16 500 6,104 x 18 500 6,104 x 20 500 6,404 x 22 500 6,554 x 24 500 6,754 x 26 500 6,804 x 28 500 7,304 x 30 500 7,604 x 32 500 8,004 x 36 500 8,454 x 40 500 9,304 x 45 500 9,954 x 50 500 11,054,5 x 5 500 6,654,5 x 6 500 6,654,5 x 8 500 6,754,5 x 10 500 6,804,5 x 12 500 7,104,5 x 14 500 7,404,5 x 16 500 7,854,5 x 18 500 8,404,5 x 20 500 8,604,5 x 22 500 8,854,5 x 24 500 9,304,5 x 26 500 9,654,5 x 28 500 9,954,5 x 30 500 10,304,5 x 32 500 10,654,5 x 36 500 11,454,5 x 40 500 12,10
Seite 350 04 / 2019
Preise per 100 Stück
Spannstifte (Spannhülsen) schwere Ausführung
Spring type straight pins, slotted, heavy type
Nenndurchmessad1 min. - vor demd1 max. - vor de
20,352,31,5
2,50,42,81,8
30,53,32,1
3,50,63,82,3
40,654,42,8
50,95,43,4
61,26,43,9
82
8,55,5
102
10,56,5
122
12,57,5
brüniertISO 8752
künftig ISO / EN
Stahl
Goupilles élastiques série épaisse
-
Abmessung VPE Preis €
4,5 x 45 500 13,204,5 x 50 500 14,055 x 5 500 6,655 x 6 500 6,655 x 8 500 6,755 x 10 500 6,805 x 12 500 7,105 x 14 500 7,405 x 16 500 7,855 x 18 500 8,405 x 20 500 8,605 x 22 500 8,855 x 24 500 9,305 x 26 500 9,655 x 28 500 9,955 x 30 500 10,305 x 32 500 10,655 x 36 500 11,455 x 40 500 12,105 x 45 500 13,205 x 50 200 14,055 x 55 200 15,805 x 60 200 17,105 x 65 200 18,605 x 70 200 20,755 x 75 200 22,805 x 80 200 25,556 x 10 500 7,906 x 12 500 8,006 x 14 500 8,406 x 16 500 8,956 x 18 500 9,606 x 20 500 10,306 x 22 500 10,906 x 24 500 11,606 x 26 500 12,456 x 28 500 13,206 x 30 500 13,956 x 32 500 14,706 x 36 500 15,606 x 40 250 16,45
Abmessung VPE Preis €
6 x 45 250 18,406 x 50 250 19,806 x 55 250 21,356 x 60 250 23,206 x 65 250 25,556 x 70 250 27,856 x 75 250 29,856 x 80 250 32,306 x 85 250 36,256 x 90 250 41,306 x 95 250 46,756 x 100 250 52,358 x 10 500 13,358 x 12 500 13,408 x 14 500 13,508 x 16 500 13,658 x 18 500 14,408 x 20 500 15,508 x 22 500 16,458 x 24 500 17,658 x 26 250 19,208 x 28 250 20,258 x 30 250 21,808 x 32 250 23,058 x 36 250 24,608 x 40 250 26,208 x 45 250 28,458 x 50 250 30,958 x 55 250 35,208 x 60 250 39,158 x 65 250 42,258 x 70 250 45,008 x 75 250 52,858 x 80 250 58,908 x 85 200 62,408 x 90 100 64,958 x 95 100 68,908 x 100 100 74,5510 x 10 500 53,0510 x 12 500 53,0510 x 14 500 18,05
Abmessung VPE Preis €
10 x 16 500 19,4510 x 18 500 21,3510 x 20 500 22,7510 x 22 500 24,6010 x 24 500 26,6010 x 26 500 27,9510 x 28 500 29,8510 x 30 500 31,5010 x 32 500 34,5510 x 36 250 37,3010 x 40 250 39,8510 x 45 250 44,7510 x 50 250 49,0510 x 55 250 52,7510 x 60 200 58,9510 x 65 200 65,3010 x 70 100 71,1010 x 75 100 75,5010 x 80 100 80,0510 x 85 100 84,7010 x 90 100 91,3010 x 95 100 96,6510 x 100 100 102,9012 x 10 50 215,6012 x 12 50 209,4512 x 14 50 204,1512 x 18 50 191,7012 x 20 50 110,1512 x 22 50 84,2012 x 24 50 116,3012 x 26 50 118,7012 x 28 50 122,2012 x 30 50 125,1012 x 32 50 129,4512 x 36 50 132,0512 x 40 50 134,4512 x 45 50 138,2012 x 50 50 141,3512 x 55 50 147,2512 x 60 50 153,3512 x 65 50 162,70
Preise per 100 Stück
04 / 2019 Seite 351
Spannstifte (Spannhülsen) schwere Ausführung
Spring type straight pins, slotted, heavy type
Nenndurchmessad1 min. - vor demd1 max. - vor de
20,352,31,5
2,50,42,81,8
30,53,32,1
3,50,63,82,3
40,654,42,8
50,95,43,4
61,26,43,9
82
8,55,5
102
10,56,5
122
12,57,5
brüniertISO 8752
künftig ISO / EN
Stahl
Goupilles élastiques série épaisse
-
Abmessung VPE Preis €
12 x 70 50 167,7012 x 75 50 174,9512 x 80 50 168,3012 x 85 50 248,3512 x 90 50 309,6012 x 95 50 371,0012 x 100 50 435,2516 x 10 50 260,6016 x 12 50 251,8016 x 14 50 249,1516 x 16 50 238,0516 x 18 50 232,2016 x 20 50 156,9016 x 22 50 159,7516 x 24 50 162,4516 x 26 50 165,3516 x 28 50 167,9516 x 30 50 173,4516 x 32 50 176,4016 x 36 50 179,1016 x 40 50 182,0516 x 45 50 184,9016 x 50 50 187,5516 x 55 50 190,5016 x 60 50 196,0516 x 65 50 204,1516 x 70 50 226,7016 x 75 50 243,6016 x 80 50 258,5516 x 85 50 376,8016 x 90 50 443,9516 x 95 50 516,1516 x 100 50 560,80
Seite 352 04 / 2019
Preise per 100 Stück
Spannstifte (Spannhülsen) schwere Ausführung
Spring type straight pins, slotted, heavy type
Nenndurchmessad1 min. - vor demd1 max. - vor ded2
20,352,32.41,5
30,53,33,52,1
40,654,44,62,8
50,95,45,63,4
61,26,46,73,9
82
8,58,85,5
102
10,510,86,5
blankISO 8752
künftig ISO / EN
A2
Goupilles élastiques série épaisse
-
Abmessung VPE Preis €
1,5 x 10 500 6,501,5 x 12 500 6,651,5 x 14 500 6,901,5 x 16 500 7,201,5 x 18 500 7,401,5 x 20 500 7,902 x 6 500 6,102 x 8 500 6,452 x 10 500 6,802 x 12 500 7,052 x 14 500 7,302 x 16 500 7,752 x 18 500 8,152 x 20 500 8,602,5 x 6 500 6,552,5 x 10 500 7,302,5 x 12 500 7,502,5 x 14 500 8,152,5 x 16 500 8,552,5 x 18 500 9,102,5 x 20 500 9,802,5 x 24 500 10,702,5 x 30 500 13,053 x 10 200 9,903 x 12 200 10,653 x 14 200 12,203 x 16 200 12,803 x 18 200 13,253 x 20 200 13,753 x 22 200 15,353 x 24 200 16,003 x 26 200 16,653 x 28 200 17,453 x 30 200 18,453 x 36 200 20,253 x 40 200 21,353,5 x 10 200 12,453,5 x 12 200 13,453,5 x 14 200 13,453,5 x 18 200 16,853,5 x 20 200 18,45
Abmessung VPE Preis €
3,5 x 24 200 19,853,5 x 30 200 23,854 x 10 200 12,604 x 12 200 14,304 x 14 200 16,404 x 16 200 17,804 x 20 200 21,004 x 24 200 23,854 x 26 200 25,154 x 30 200 27,454 x 32 200 29,154 x 36 200 31,554 x 40 200 35,304 x 45 200 39,204 x 50 200 42,855 x 12 200 19,555 x 14 200 22,005 x 16 200 24,055 x 18 200 25,905 x 20 200 28,105 x 24 200 32,305 x 26 200 34,155 x 28 200 37,005 x 30 200 40,205 x 32 200 41,705 x 36 200 46,455 x 40 200 50,905 x 45 200 54,855 x 50 200 61,456 x 16 200 28,306 x 20 200 38,656 x 24 200 44,506 x 26 200 48,056 x 30 200 54,856 x 36 200 65,106 x 40 200 80,406 x 45 200 92,706 x 50 200 105,456 x 60 200 129,906 x 70 200 147,708 x 16 100 41,15
Abmessung VPE Preis €
8 x 20 100 56,108 x 24 100 67,808 x 26 100 70,258 x 28 100 74,458 x 30 100 80,708 x 36 100 95,558 x 40 100 116,408 x 45 100 127,558 x 50 100 135,50
Preise per 100 Stück
04 / 2019 Seite 353
Senkschrauben mit Innensechskant
Hexagon socket countersunk head screws
d1dk min.k max.b2 1)b3 2)
M 35,541,86
12-
M 47,532,48
14-
M 59,433,116
-
M 611,343,72
1824
M 815,244,96
2228
M 1019,22
6,22632
M 1223,127,44
3036
M 1629,01
8,83844
M 2036,0510,16
4652
brüniertISO 10642
künftig ISO / EN
8.8
Vis à six-pans creux a tête fraisée
-
Abmessung VPE Preis €
3 x 5 500 8,703 x 6 500 7,503 x 8 500 7,203 x 10 500 6,553 x 12 500 7,003 x 16 500 7,353 x 20 500 7,953 x 25 500 11,903 x 30 500 17,203 x 40 500 39,904 x 6 500 8,704 x 8 500 6,554 x 10 500 5,504 x 12 500 6,054 x 14 500 7,254 x 16 500 7,854 x 18 500 8,704 x 20 500 8,254 x 25 500 8,854 x 30 500 10,304 x 40 500 13,504 x 45 500 32,554 x 50 500 21,754 x 55 500 58,704 x 60 500 28,305 x 8 500 9,805 x 10 500 6,055 x 12 500 7,855 x 16 500 7,855 x 20 500 9,105 x 25 500 10,455 x 30 500 11,705 x 35 200 13,905 x 40 200 15,505 x 45 200 17,105 x 50 200 18,705 x 60 200 21,806 x 10 500 8,706 x 12 500 6,756 x 16 500 7,356 x 20 500 8,70
Abmessung VPE Preis €
6 x 22 500 9,956 x 25 500 11,156 x 30 500 11,756 x 35 200 13,806 x 40 200 18,306 x 45 200 22,256 x 50 200 20,706 x 60 200 25,506 x 65 200 28,806 x 70 200 41,808 x 10 200 21,758 x 12 200 21,058 x 16 200 13,958 x 20 200 15,708 x 25 200 18,558 x 30 200 20,158 x 35 200 20,958 x 40 200 26,708 x 45 200 31,508 x 50 200 35,958 x 55 200 41,858 x 60 200 44,908 x 65 100 50,008 x 70 100 57,008 x 80 100 66,808 x 90 100 80,008 x 100 100 88,0010 x 16 200 27,9010 x 20 200 31,8510 x 25 200 28,4510 x 30 200 32,6510 x 35 100 35,7010 x 40 100 41,2510 x 45 100 46,6510 x 50 100 52,3010 x 55 100 57,5510 x 60 100 62,3510 x 65 100 74,1010 x 70 100 71,0510 x 75 100 96,9010 x 80 100 104,65
Abmessung VPE Preis €
12 x 20 100 65,4012 x 25 100 52,3012 x 30 100 57,5512 x 35 100 62,1512 x 40 100 62,3512 x 45 100 78,5012 x 50 100 74,5512 x 55 100 97,6512 x 60 100 109,8512 x 65 50 117,7012 x 70 50 126,4512 x 75 50 174,4012 x 80 50 145,6016 x 30 50 87,2016 x 35 50 109,0016 x 40 50 113,3516 x 45 50 130,8016 x 50 50 139,5016 x 55 50 148,2516 x 60 50 165,7016 x 70 25 200,5516 x 80 25 244,1516 x 100 25 374,9520 x 40 25 195,3520 x 45 25 213,6520 x 50 25 294,3020 x 60 25 308,1020 x 70 25 523,2020 x 80 25 558,1020 x 90 25 572,7520 x 100 25 601,55
Seite 354 04 / 2019
Preise per 100 Stück
Senkschrauben mit Innensechskant
Hexagon socket countersunk head screws
d1dk min.k max.b2 1)b3 2)
M 35,541,86
12-
M 47,532,48
14-
M 59,433,116
-
M 611,343,72
1824
M 815,244,96
2228
M 1019,22
6,22632
M 1223,127,44
3036
M 1629,01
8,83844
M 2036,0510,16
4652
verz. blauISO 10642
künftig ISO / EN
8.8
Vis à six-pans creux a tête fraisée
-
Abmessung VPE Preis €
3 x 5 500 8,703 x 6 500 7,253 x 8 500 7,853 x 10 500 7,103 x 12 500 7,353 x 16 500 8,053 x 20 500 8,703 x 25 500 12,203 x 30 500 11,554 x 6 500 7,404 x 8 500 7,004 x 10 500 5,504 x 12 500 6,054 x 14 500 12,754 x 16 500 6,654 x 20 500 8,254 x 25 500 9,104 x 30 500 10,754 x 35 500 12,754 x 40 500 13,304 x 45/45 500 17,004 x 45 500 17,004 x 50 500 21,805 x 8 500 10,255 x 10 500 8,705 x 12 500 7,205 x 16 500 8,705 x 18 500 9,155 x 20 500 9,855 x 25 500 10,755 x 30 500 12,455 x 35 200 15,705 x 40 200 17,005 x 45 200 17,455 x 50 200 17,455 x 60 200 20,056 x 8 500 11,906 x 10 500 10,456 x 12 500 8,056 x 14 500 8,706 x 16 500 8,55
Abmessung VPE Preis €
6 x 18 500 9,706 x 20 500 10,156 x 22 500 17,456 x 25 500 11,706 x 30 500 13,806 x 35 200 15,256 x 40 200 15,706 x 45 200 16,556 x 50 200 23,506 x 60 200 28,206 x 70 200 32,506 x 80 200 37,308 x 10 200 16,958 x 12 200 23,758 x 16 200 14,808 x 20 200 16,958 x 25 200 19,608 x 30 200 23,558 x 35 200 25,308 x 40 200 28,708 x 45 200 33,508 x 50 200 38,308 x 55 200 43,608 x 60 200 48,408 x 65 200 65,858 x 70 200 63,658 x 70/70 200 63,658 x 80 200 72,808 x 90 100 91,558 x 100 100 95,908 x 120 100 226,7010 x 16 200 27,9010 x 20 200 32,5010 x 25 200 30,5010 x 30 200 39,2510 x 35 100 41,0010 x 40 100 44,9010 x 45 100 50,6010 x 50 100 56,7010 x 55 100 62,4510 x 60 100 66,70
Abmessung VPE Preis €
10 x 65 100 95,9010 x 70 100 98,1010 x 80 100 100,3010 x 90 100 117,7010 x 100 100 131,9010 x 120 100 158,2512 x 20 100 72,8012 x 25 100 55,8012 x 30 100 63,6512 x 35 100 68,0012 x 40 100 70,6512 x 45 100 70,6512 x 50 100 81,1012 x 55 100 98,7512 x 60 100 113,3512 x 70 50 134,3012 x 80 50 150,8512 x 90 50 190,9512 x 100 50 202,7512 x 120 50 279,0516 x 25 50 287,7516 x 30 50 104,6516 x 35 50 113,3516 x 40 50 123,8016 x 45 50 148,2516 x 50 50 174,4016 x 55 50 208,1016 x 60 50 200,5516 x 60 50 244,1516 x 80 25 270,3016 x 100 25 305,2016 x 120 25 395,0016 x 140 25 482,9016 x 150 25 520,80
Preise per 100 Stück
04 / 2019 Seite 355
Senkschrauben mit Innensechskant
Hexagon socket countersunk head screws
d1dkkb2 1)b3 2)
M 5102,816
-
M 6123,31824
M 8164,42228
M 10205,52632
M 12246,53036
M 16307,53844
M 20368,54652
brüniertISO 10642
künftig ISO / EN
10.9
Vis à six-pans creux a tête fraisée
-
Abmessung VPE Preis €
3 x 6 500 8,703 x 8 500 7,203 x 10 500 6,553 x 12 500 7,003 x 16 500 7,353 x 20 500 7,953 x 25 500 8,653 x 35 500 11,354 x 6 500 8,704 x 8 500 6,554 x 10 500 6,804 x 12 500 7,504 x 14 500 13,504 x 16 500 8,104 x 18 500 13,504 x 20 500 8,304 x 22 500 21,654 x 25 500 9,104 x 30 500 10,754 x 35 500 12,004 x 40 500 12,604 x 45 500 32,554 x 50 500 33,455 x 6 500 25,305 x 8 500 9,955 x 10 500 7,005 x 12 500 7,405 x 14 500 22,955 x 16 500 8,305 x 18 500 22,955 x 20 500 9,605 x 22 500 27,355 x 25 500 10,755 x 30 500 11,705 x 35 200 14,155 x 40 200 16,155 x 45 200 24,405 x 50 200 27,055 x 55 200 80,205 x 60 200 81,956 x 8 500 12,65
Abmessung VPE Preis €
6 x 10 500 9,956 x 12 500 9,006 x 14 500 9,906 x 16 500 9,956 x 18 500 10,106 x 20 500 11,106 x 22 500 27,956 x 25 500 11,356 x 30 500 13,306 x 35 200 15,356 x 40 200 17,456 x 45 200 18,756 x 50 200 21,806 x 55 200 23,506 x 60 200 25,556 x 70 200 27,606 x 80 200 31,658 x 10 200 23,558 x 12 200 18,308 x 14 200 19,608 x 16 200 14,308 x 18 200 16,358 x 20 200 16,358 x 22 200 30,658 x 25 200 16,358 x 30 200 18,308 x 35 200 20,158 x 40 200 22,358 x 45 200 29,208 x 50 200 33,358 x 55 200 39,258 x 60 200 45,008 x 70 200 60,808 x 80 200 85,008 x 90 100 107,908 x 100 100 130,8010 x 16 200 27,8010 x 18 200 61,1510 x 20 200 24,6510 x 22 200 52,4510 x 25 200 31,85
Abmessung VPE Preis €
10 x 30 200 31,8510 x 35 100 32,7010 x 40 100 36,3010 x 45 100 39,2510 x 50 100 42,8510 x 55 100 50,0510 x 60 100 66,7010 x 65 100 71,3010 x 70 100 77,1510 x 80 100 83,0510 x 90 100 96,1510 x 100 100 105,9512 x 20 100 43,8012 x 25 100 52,3012 x 30 100 56,9012 x 35 100 61,5012 x 40 100 63,0012 x 45 100 65,4012 x 50 100 79,8012 x 55 100 78,5012 x 60 100 98,7512 x 65 50 107,9012 x 70 50 114,4512 x 80 50 125,5512 x 90 50 147,5012 x 100 50 163,5012 x 110 50 223,5512 x 120 50 234,1516 x 30 50 114,4516 x 35 50 128,8516 x 40 50 138,6516 x 45 50 148,4516 x 50 50 167,4016 x 55 50 179,8516 x 60 50 196,2016 x 70 25 228,9016 x 80 25 264,1016 x 90 25 298,4516 x 100 25 330,2520 x 35 25 479,6020 x 40 25 261,60
Seite 356 04 / 2019
Preise per 100 Stück
Senkschrauben mit Innensechskant
Hexagon socket countersunk head screws
d1dkkb2 1)b3 2)
M 5102,816
-
M 6123,31824
M 8164,42228
M 10205,52632
M 12246,53036
M 16307,53844
M 20368,54652
brüniertISO 10642
künftig ISO / EN
10.9
Vis à six-pans creux a tête fraisée
-
Abmessung VPE Preis €
20 x 45 25 261,6020 x 50 25 261,6020 x 55 25 377,7520 x 60 25 393,0520 x 70 25 417,0020 x 80 25 455,6020 x 90 25 572,7520 x 100 25 601,5520 x 110 25 634,0520 x 120 25 892,9520 x 130 25 974,9020 x 140 25 1056,8520 x 150 25 1138,8520 x 160 10 1561,2020 x 180 10 1679,6020 x 200 10 1800,35
Preise per 100 Stück
04 / 2019 Seite 357
Senkschrauben mit Innensechskant
Hexagon socket countersunk head screws
d1dkkb2 1)b3 2)
M 5102,816
-
M 6123,31824
M 8164,42228
M 10205,52632
M 12246,53036
M 16307,53844
M 20368,54652
verz. blauISO 10642
künftig ISO / EN
10.9
Vis à six-pans creux a tête fraisée
-
Abmessung VPE Preis €
3 x 5 500 16,153 x 6 500 12,303 x 8 500 7,853 x 10 500 7,103 x 12 500 7,353 x 16 500 8,053 x 20 500 8,703 x 25 500 9,353 x 30/30 500 11,553 x 30 500 11,553 x 35/35 500 12,203 x 35 500 12,203 x 40 500 21,504 x 6 500 9,604 x 8 500 7,004 x 10 500 7,254 x 12 500 7,804 x 14 500 12,754 x 16 500 12,904 x 18 500 13,204 x 20 500 13,454 x 22 500 13,704 x 25 500 13,954 x 30 500 14,154 x 35 500 14,454 x 40 500 14,654 x 45 500 43,404 x 50 500 50,055 x 6 500 31,055 x 8 500 10,455 x 10 500 7,405 x 12 500 8,405 x 16 500 8,855 x 20 500 9,855 x 25 500 10,705 x 30 500 13,655 x 35 200 14,755 x 40 200 18,005 x 45 200 20,405 x 50 200 30,506 x 8 500 14,40
Abmessung VPE Preis €
6 x 10 500 11,406 x 12 500 10,456 x 14 500 13,206 x 16 500 10,456 x 18 500 13,406 x 20 500 13,006 x 25 500 13,506 x 30 500 15,856 x 35 200 18,206 x 40 200 20,856 x 45 200 26,606 x 50 200 26,606 x 55 200 35,156 x 60 200 38,806 x 70 200 72,306 x 80 200 107,908 x 10 200 32,708 x 12 200 31,058 x 14 200 31,408 x 16 200 20,358 x 18 200 47,958 x 20 200 16,908 x 25 200 19,758 x 30 200 22,358 x 35 200 24,558 x 40 200 27,358 x 45 200 31,058 x 45/45 200 31,058 x 50 200 35,658 x 55 200 42,858 x 60 200 47,408 x 70 200 63,108 x 80 200 91,358 x 90 100 124,158 x 100 100 148,2510 x 16 200 37,1510 x 20 200 30,0010 x 25 200 33,0510 x 30 200 39,9010 x 35 100 40,1010 x 40 100 40,20
Abmessung VPE Preis €
10 x 45 100 40,9010 x 50 100 53,6510 x 55 100 62,4510 x 60 100 72,6010 x 70 100 81,7510 x 80 100 88,3010 x 90 100 139,0010 x 100 100 155,3512 x 20 100 54,3012 x 25 100 55,6012 x 30 100 60,1512 x 35 100 65,4012 x 40 100 71,3012 x 45 100 78,5012 x 50 100 91,5512 x 55 100 98,7512 x 60 100 105,3012 x 65 50 115,1012 x 70 50 121,6512 x 80 50 147,1512 x 90 50 165,4512 x 100 50 176,6012 x 110 50 298,0012 x 120 50 312,2016 x 30 50 143,5516 x 35 50 144,7516 x 40 50 145,5016 x 45 50 145,5016 x 50 50 179,8516 x 55 50 208,1016 x 60 50 220,0016 x 70 25 240,3516 x 100 25 279,6020 x 50 25 270,3020 x 60 25 376,7020 x 70 25 431,6520 x 80 25 527,5520 x 90 25 608,2020 x 100 25 690,9020 x 120 25 849,10
Seite 358 04 / 2019
Preise per 100 Stück
Senkschrauben mit Innensechskant
Hexagon socket countersunk head screws
d1dk min.k max.b11)b32)
M 35,541,86
12-
M 47,532,48
14-
M 59,433,116
-
M 611,343,72
1824
M 815,244,96
2228
M 1019,22
6,22632
M 1223,127,44
3036
M 1629,01
8,83844
M 2036,0510,16
4652
blankISO 10642
künftig ISO / EN
A2
Vis à six-pans creux a tête fraisée
-
Abmessung VPE Preis €
3 x 5 1000 5,653 x 6 1000 7,653 x 8 1000 7,153 x 10 1000 6,403 x 12 1000 6,103 x 14 1000 6,653 x 16 1000 6,103 x 18 1000 8,153 x 20 1000 7,153 x 25 1000 8,703 x 30 1000 10,204 x 6 1000 7,654 x 8 1000 7,154 x 10 1000 6,404 x 12 1000 6,104 x 14 1000 6,654 x 16 1000 6,104 x 18 1000 8,154 x 20 500 7,154 x 25 500 8,704 x 30 500 10,204 x 35 200 11,504 x 40 200 13,554 x 45 200 16,654 x 50 200 18,405 x 6 500 12,805 x 8 500 9,205 x 10 500 6,505 x 12 500 6,055 x 14 500 6,505 x 16 500 6,255 x 18 500 7,605 x 20 500 6,905 x 25 500 8,605 x 30 500 10,105 x 35 200 12,805 x 40 200 14,605 x 45 200 17,155 x 50 200 20,655 x 55 200 30,555 x 60 100 32,00
Abmessung VPE Preis €
5 x 70 100 46,105 x 80 100 55,005 x 90 100 69,156 x 8 500 10,206 x 10 500 9,606 x 12 500 6,956 x 14 500 7,506 x 16 500 7,356 x 18 200 9,356 x 20 200 8,456 x 25 200 9,956 x 30 200 11,806 x 35 200 13,356 x 40 200 14,756 x 45 200 19,156 x 50 200 20,856 x 55 200 25,906 x 60 100 29,556 x 70 100 41,756 x 80 100 53,756 x 90 100 64,008 x 10 200 20,658 x 12 200 13,658 x 14 200 14,358 x 16 200 14,158 x 18 200 15,358 x 20 200 16,608 x 22 200 18,008 x 25 200 17,708 x 30 200 19,508 x 35 200 23,358 x 40 100 25,758 x 45 100 31,558 x 50 100 36,358 x 55 100 40,908 x 60 100 46,408 x 70 100 57,358 x 80 100 79,408 x 90 100 94,758 x 100 50 102,4510 x 16 100 42,20
Abmessung VPE Preis €
10 x 18 100 33,6510 x 20 100 27,4010 x 25 100 29,5510 x 30 100 33,3010 x 35 100 37,9510 x 40 100 40,5010 x 45 100 45,3010 x 50 50 50,0510 x 55 50 59,9010 x 60 50 65,0510 x 70 50 79,4510 x 80 50 105,9010 x 90 50 153,6510 x 100 50 179,3012 x 20 50 61,1512 x 25 50 66,1512 x 30 50 68,6012 x 35 50 70,1012 x 40 50 75,1012 x 45 50 81,6512 x 50 50 86,3012 x 55 50 121,2012 x 60 50 113,9012 x 70 50 173,5012 x 80 25 136,6512 x 90 25 160,3012 x 100 25 225,4016 x 25 25 235,6516 x 30 25 256,1516 x 35 25 268,9516 x 40 25 281,7516 x 45 25 294,5516 x 50 25 320,2016 x 55 25 500,0016 x 60 25 345,8016 x 70 25 409,8516 x 80 25 435,4516 x 90 25 473,9016 x 100 25 512,3016 x 110 25 915,0016 x 120 25 950,00
Preise per 100 Stück
04 / 2019 Seite 359
Senkschrauben mit Innensechskant
Hexagon socket countersunk head screws
d1dk min.k max.b11)b32)
M 35,541,86
12-
M 47,532,48
14-
M 59,433,116
-
M 611,343,72
1824
M 815,244,96
2228
M 1019,22
6,22632
M 1223,127,44
3036
M 1629,01
8,83844
M 2036,0510,16
4652
blankISO 10642
künftig ISO / EN
A2
Vis à six-pans creux a tête fraisée
-
Abmessung VPE Preis €
16 x 130 25 1050,0016 x 140 25 1090,0016 x 150 25 1250,0020 x 40 25 563,5520 x 45 25 589,1520 x 50 25 614,7520 x 55 25 561,4020 x 60 25 666,0020 x 70 25 768,4520 x 80 25 896,5520 x 90 25 973,4020 x 100 25 1050,2520 x 110 25 1022,0020 x 120 25 1105,6520 x 130 25 1183,1520 x 140 25 1260,6520 x 150 25 1346,2524 x 50 10 1544,0524 x 55 10 1544,0524 x 60 10 1544,0524 x 70 10 1652,5024 x 80 10 1755,8024 x 90 10 1962,3524 x 100 10 2179,2524 x 110 10 2685,3524 x 120 10 2736,9524 x 130 10 2840,2524 x 140 10 2891,9024 x 150 10 2917,70
Seite 360 04 / 2019
Preise per 100 Stück
Spannstifte (Spannhülsen) leichte Ausführung
Spring type straight pins, slotted, slight type
Nenndurchmessad1 min. - vor demd2 max. - vor ded2
20,22,32.41,9
2,50,252,82,92,3
30,253,33,52,7
3,50,33,8
43,1
40,54,44,63,4
50,55,45,64,4
60,76,46,74,9
81,58,58,8
7
102
10,510,88,5
122
12,512,810,5
brüniertISO 13337
künftig ISO / EN
Stahl
Goupilles élastiques
-
Abmessung VPE Preis €
2 x 6 1000 4,052 x 10 1000 4,102 x 16 1000 4,302 x 20 1000 4,752 x 24 1000 4,952 x 26 1000 5,252 x 30 1000 5,803 x 6 1000 4,753 x 10 1000 4,853 x 12 1000 4,853 x 14 1000 4,853 x 16 1000 4,853 x 18 1000 5,253 x 20 1000 5,403 x 22 1000 5,453 x 24 1000 5,553 x 26 1000 5,803 x 30 1000 6,403 x 40 1000 8,004 x 6 1000 5,554 x 10 1000 5,804 x 12 1000 5,804 x 14 1000 6,054 x 16 1000 6,104 x 20 1000 6,404 x 22 1000 6,554 x 24 1000 6,754 x 26 1000 6,804 x 30 1000 7,604 x 36 1000 8,454 x 40 1000 9,304 x 45 1000 9,954 x 50 1000 14,805 x 14 500 7,405 x 18 500 8,405 x 20 500 8,605 x 22 500 8,855 x 24 500 9,305 x 30 500 10,305 x 40 500 12,105 x 50 500 14,65
Abmessung VPE Preis €
6 x 10 500 7,906 x 12 500 8,006 x 16 500 8,956 x 24 500 10,956 x 30 500 13,956 x 32 500 14,706 x 36 500 15,606 x 40 250 16,456 x 50 250 19,808 x 10 500 13,358 x 16 500 13,658 x 20 500 14,308 x 30 250 21,808 x 40 200 26,208 x 60 100 39,15
Preise per 100 Stück
04 / 2019 Seite 361
Zylinderschrauben mit TX
d1GewindelängeKopfdrm.Schaft max.TX-Nr.:
M 1,6 M 216
3,9826
M 2,517
4,682,5
8
M 318
5,683
10
M 420
7,224
20
M 522
8,725
25
M 624
10,226
30
M 828
13,278
45
M 1032
16,271050
M 1236
18,271255
M 1644
24,331670
M 2052
30,332090
blankISO 14579
künftig ISO / EN
A2-
Abmessung VPE Preis €
2 x 3 1000 26,902 x 4 1000 26,902 x 5 1000 26,902 x 6 1000 26,902 x 8 1000 27,902,0x 10 1000 27,902 x 12 1000 27,902,0x 14 1000 41,852,0x 16 1000 33,602,0x 18 1000 50,102,0x 20 1000 50,102,0x 22 1000 55,002,5 x 3 1000 26,902,5 x 4 1000 26,902,5 x 5 1000 26,902,5 x 6 1000 26,902,5 x 8 1000 27,902,5 x 10 1000 27,902,5 x 12 1000 29,452,5 x 14 1000 41,852,5 x 16 1000 33,602,5 x 18 1000 50,102,5 x 20 1000 40,302,5 x 30 1000 50,103 x 4 1000 16,053 x 5 1000 13,953 x 6 1000 12,403 x 8 1000 11,403 x 10 1000 9,853 x 12 1000 9,853 x 14 1000 10,353 x 16 1000 8,303 x 18 1000 10,853 x 20 1000 8,803 x 22 1000 10,853 x 25 1000 8,803 x 30 1000 10,853 x 35 1000 11,903 x 40 1000 12,953 x 45 1000 18,003 x 50 1000 24,00
Abmessung VPE Preis €
3 x 60 1000 27,004 x 5 1000 21,704 x 6 1000 12,954 x 8 1000 11,904 x 10 1000 9,854 x 12 1000 9,854 x 14 1000 10,354 x 16 1000 8,304 x 18 1000 10,854 x 20 1000 8,804 x 22 1000 10,854 x 25 1000 8,804 x 30 1000 10,854 x 35 1000 11,904 x 10 1000 12,954 x 45 1000 27,404 x 50 1000 27,405 x 6 500 20,655 x 8 500 12,955 x 10 500 11,905 x 12 500 11,905 x 14 500 11,405 x 16 500 9,305 x 18 500 11,905 x 20 500 9,855 x 22 500 13,455 x 25 500 10,855 x 30 500 12,405 x 35 200 13,455 x 40 200 15,005 x 45 200 16,055 x 50 200 18,105 x 55 200 19,655 x 60 100 21,705 x 70 100 25,855 x 80 100 67,156 x 8 500 17,056 x 10 500 15,506 x 12 500 15,506 x 14 500 15,506 x 16 500 12,40
Abmessung VPE Preis €
6 x 18 500 16,556 x 20 200 17,006 x 22 200 18,106 x 25 200 14,506 x 30 200 15,506 x 35 200 17,556 x 40 200 19,156 x 45 200 22,756 x 50 200 25,306 x 55 200 29,956 x 60 100 31,506 x 65 100 48,056 x 70 100 38,756 x 75 100 57,856 x 80 100 46,506 x 90 100 60,506 x 100 100 78,756 x 110 100 90,006 x 120 100 103,256 x 130 100 111,006 x 140 100 119,006 x 150 100 127,258 x 10 200 28,958 x 12 200 28,958 x 14 200 29,958 x 16 200 24,308 x 18 200 28,958 x 20 200 23,258 x 22 200 26,908 x 25 200 21,708 x 30 200 23,258 x 35 200 24,808 x 40 200 27,408 x 45 100 32,058 x 50 100 35,658 x 55 100 42,358 x 60 100 60,008 x 65 100 80,058 x 70 100 64,058 x 75 100 104,358 x 80 100 83,70
Seite 362 04 / 2019
Preise per 100 Stück
Zylinderschrauben mit TX
d1GewindelängeKopfdrm.Schaft max.TX-Nr.:
M 1,6 M 216
3,9826
M 2,517
4,682,5
8
M 318
5,683
10
M 420
7,224
20
M 522
8,725
25
M 624
10,226
30
M 828
13,278
45
M 1032
16,271050
M 1236
18,271255
M 1644
24,331670
M 2052
30,332090
blankISO 14579
künftig ISO / EN
A2-
Abmessung VPE Preis €
8 x 90 100 90,908 x 100 50 101,258 x 110 50 122,508 x 120 50 144,008 x 130 50 175,758 x 140 50 188,258 x 150 50 235,0010 x 16 100 42,9010 x 20 100 40,3010 x 25 100 37,2010 x 30 100 39,2510 x 35 100 40,8010 x 40 100 43,4010 x 45 100 51,6510 x 50 100 54,7510 x 55 100 63,0010 x 60 100 67,1510 x 65 100 100,7010 x 70 100 80,6010 x 75 100 119,3010 x 80 100 95,5510 x 90 100 109,5010 x 100 100 180,00
Preise per 100 Stück
04 / 2019 Seite 363
Zylinderschrauben mit TX und niedrigem Kopf
d1Gewindelänge mi
kTX-Nr.:
M 225
1,556
M 2,525
1,858
M 325
2,410
M 438
3,120
M 538
3,6525
M 638
4,430
M 838
5,545
M 1038
6,950
blankISO 14580
künftig ISO / EN
A2-
Abmessung VPE Preis €
3 x 6 1000 27,903 x 8 1000 25,053 x 10 1000 19,653 x 12 1000 19,653 x 16 1000 17,853 x 20 1000 18,853 x 25 500 20,153 x 30 500 25,303 x 35 500 27,903 x 40 500 30,754 x 6 500 41,854 x 8 500 34,604 x 10 500 25,304 x 12 500 25,304 x 16 500 17,854 x 20 500 18,854 x 25 500 20,154 x 30 500 25,304 x 35 200 27,904 x 40 200 30,755 x 6 500 25,305 x 8 500 25,305 x 10 500 25,305 x 12 500 25,305 x 16 500 19,905 x 20 500 21,205 x 25 500 22,505 x 30 500 26,355 x 35 200 29,205 x 40 200 31,755 x 45 200 37,205 x 50 200 42,355 x 55 200 56,805 x 60 100 62,006 x 8 500 38,756 x 10 500 31,506 x 12 500 31,506 x 16 500 25,056 x 20 200 27,156 x 25 200 28,406 x 30 200 31,00
Abmessung VPE Preis €
6 x 35 200 35,006 x 40 200 38,506 x 45 200 46,506 x 50 200 51,156 x 55 200 64,556 x 60 100 69,758 x 10 200 56,308 x 12 200 56,308 x 16 200 50,658 x 20 200 43,408 x 25 200 45,008 x 30 200 47,008 x 35 200 48,808 x 40 200 53,458 x 45 100 62,508 x 50 100 70,258 x 55 100 82,658 x 60 100 91,4510 x 16 100 102,2510 x 20 100 87,8010 x 25 100 82,6510 x 30 100 90,4010 x 35 100 94,5510 x 40 100 101,2510 x 45 100 118,8010 x 50 100 126,5510 x 55 100 146,7010 x 60 100 154,9512 x 20 50 134,0012 x 25 50 125,0012 x 30 50 127,0012 x 35 50 135,0012 x 50 50 176,0012 x 60 50 209,0012 x 70 50 258,00
Seite 364 04 / 2019
Preise per 100 Stück
Senkschrauben mit TX
Cross recessed countersunk (flat) head screws
d1dkkTX-Nr.
M 23,81,2
6
M 2,54,71,5
8
M 35,5
1,6510
M 48,42,720
M 59,32,725
M 611,33,330
M 815,84,65
40
M 1018,3
550
verz. blauISO 14581
künftig ISO / EN
4.8
Vis à tête fraisée, à empreinte cruciforme
-
Abmessung VPE Preis €
2 x 4 2000 1,302 x 5 2000 1,302 x 6 2000 1,602 x 8 2000 2,302 x 10 2000 1,602 x 12 2000 1,702 x 16 2000 2,102.5 x 4 2000 1,702.5 x 5 2000 1,602.5 x 6 2000 1,702.5 x 8 2000 1,802.5 x 10 2000 2,102.5 x 12 2000 2,202.5 x 16 2000 2,502.5 x 20 2000 2,702.5 x 25 2000 3,103 x 4 2000 9,403 x 5 2000 1,603 x 6 2000 1,903 x 8 2000 2,103 x 10 2000 2,203 x 12 2000 2,703 x 14 2000 2,503 x 16 2000 2,403 x 18 2000 2,903 x 20 2000 2,903 x 25 2000 3,403 x 30 2000 3,603 x 35 2000 3,803 x 40 1000 3,903 x 45 1000 5,503 x 50 1000 5,904 x 6 2000 3,604 x 8 2000 3,704 x 10 2000 3,804 x 12 2000 4,004 x 16 2000 4,504 x 20 2000 5,204 x 25 1000 6,004 x 30 1000 6,904 x 35 1000 8,00
Abmessung VPE Preis €
4 x 40 1000 8,505 x 8 2000 3,805 x 10 2000 3,905 x 12 1000 4,105 x 14 1000 4,705 x 16 1000 5,205 x 20 1000 6,205 x 25 1000 7,805 x 30 1000 8,705 x 35 500 10,505 x 40 500 12,005 x 45 500 13,405 x 50 500 13,605 x 60 200 16,805 x 70 200 17,505 x 80 200 18,106 x 10 1000 5,506 x 12 1000 6,006 x 16 1000 7,506 x 20 1000 9,006 x 25 500 10,806 x 30 500 12,506 x 35 500 15,006 x 40 500 16,006 x 45 500 15,806 x 50 200 20,006 x 60 200 24,406 x 70 200 27,106 x 80 200 32,106 x 100 200 41,008 x 12 500 11,908 x 16 500 12,108 x 20 500 14,508 x 25 200 17,808 x 30 200 27,908 x 40 100 25,608 x 50 100 31,308 x 60 100 36,808 x 80 100 51,00
Preise per 100 Stück
04 / 2019 Seite 365
ddkkTX-Nr.
M 23,81,2
6
M 2,54,71,5
8
M 35,5
1,6510
M 48,42,720
M 59,32,725
M 611,33,330
M 815,54,65
40
M 1018,3
550
blankISO 14581
künftig ISO / EN
A2-
Abmessung VPE Preis €
2 x 3 1000 4,452 x 4 1000 4,452 x 6 1000 3,852 x 8 1000 3,852 x 10 1000 4,002,5 x 4 1000 4,452,5 x 5 1000 4,252,5 x 6 1000 3,952,5 x 8 1000 4,102,5 x 10 1000 4,352,5 x 12 1000 4,652,5 x 14 1000 5,202,5 x 16 1000 5,202,5 x 18 1000 5,503 x 5 1000 4,303 x 6 1000 3,953 x 8 1000 3,653 x 10 1000 3,503 x 12 1000 3,853 x 16 500 4,503 x 20 500 5,003 x 25 500 6,303 x 30 500 8,954 x 5 500 6,204 x 6 500 6,204 x 8 500 5,704 x 10 500 5,154 x 12 500 5,004 x 16 500 5,754 x 20 500 6,504 x 25 500 7,204 x 30 500 9,755 x 6 500 11,055 x 8 500 8,655 x 10 500 7,305 x 12 500 7,505 x 14 500 10,405 x 16 500 8,355 x 20 500 8,805 x 25 500 10,155 x 30 500 12,00
Abmessung VPE Preis €
5 x 35 200 14,855 x 40 500 19,356 x 10 500 12,306 x 12 500 10,656 x 14 500 11,006 x 16 500 11,606 x 20 200 13,306 x 25 200 14,706 x 30 200 18,156 x 35 200 19,456 x 40 200 22,556 x 45 200 26,706 x 50 200 35,256 x 55 200 39,006 x 60 200 43,208 x 10 200 45,458 x 12 200 45,458 x 14 200 45,458 x 16 200 30,008 x 20 200 30,258 x 25 200 32,308 x 30 200 37,458 x 35 200 41,008 x 40 200 48,0510 x 16 200 42,2010 x 18 200 33,6510 x 20 200 30,3010 x 25 200 32,8510 x 30 200 35,4010 x 35 200 37,9510 x 40 200 40,5010 x 45 200 45,3010 x 50 200 50,0510 x 55 200 59,9010 x 60 200 65,0510 x 70 200 79,4510 x 80 200 105,9010 x 90 200 153,6510 x 100 200 179,30
Seite 366 04 / 2019
Preise per 100 Stück
Linsenschrauben mit TX
Cross recessed raised cheese head screws
ddkkTX-Nr.
M 24
1,66
M 2,55
2,18
M 35,62,410
M 48
3,120
M 59,53,725
M 6124,630
M 8166
45
verz. blauISO 14583
künftig ISO / EN
4.8
bei M 3, Kopf nach DIN 7985 TX
-
Abmessung VPE Preis €
2 x 4 2000 1,702 x 5 2000 1,702 x 6 2000 1,802 x 8 2000 1,902 x 10 2000 1,902 x 12 2000 2,102 x 16 2000 2,402,5 x 4 2000 2,302,5 x 5 2000 2,302,5 x 6 2000 2,302,5 x 8 2000 2,402,5 x 10 2000 2,502,5 x 12 2000 3,902,5 x 16 2000 4,202,5 x 20 2000 4,602,5 x 25 2000 3,903 x 4 2000 2,503 x 5 2000 3,003 x 6 2000 2,703 x 8 2000 2,503 x 10 2000 3,203 x 12 2000 3,203 x 14 2000 3,303 x 16 2000 3,603 x 18 2000 3,603 x 20 2000 4,003 x 25 2000 3,603 x 30 2000 3,803 x 35 2000 3,903 x 40 1000 4,104 x 5 2000 3,404 x 6 2000 3,204 x 8 2000 3,504 x 10 2000 3,604 x 12 2000 3,904 x 16 2000 4,604 x 20 2000 5,704 x 25 1000 6,304 x 30 1000 7,404 x 35 1000 8,504 x 40 1000 8,70
Abmessung VPE Preis €
4 x 60 500 13,005 x 6 2000 6,105 x 8 2000 6,205 x 10 2000 6,405 x 12 1000 6,805 x 14 1000 7,905 x 16 1000 7,505 x 18 1000 9,105 x 20 1000 10,405 x 25 1000 11,005 x 30 500 11,105 x 35 500 12,105 x 40 500 13,205 x 45 500 15,005 x 50 500 19,006 x 8 500 10,906 x 10 500 10,406 x 12 500 10,706 x 12 500 11,606 x 16 500 11,606 x 18 500 13,106 x 20 500 15,006 x 25 500 16,506 x 30 500 18,306 x 35 500 19,506 x 40 200 21,106 x 50 200 23,406 x 60 200 30,006 x 70 200 32,006 x 80 200 36,508 x 10 200 21,708 x 12 200 22,008 x 16 200 22,308 x 20 200 24,708 x 25 200 27,508 x 30 200 30,708 x 35 200 33,608 x 40 100 36,308 x 45 100 39,108 x 50 100 42,008 x 60 100 47,60
Abmessung VPE Preis €
8 x 70 100 60,908 x 80 100 68,60
Preise per 100 Stück
04 / 2019 Seite 367
Linsenschrauben mit TX
Cross recessed raised cheese head screws
ddkkTX-Nr.
M 24
1,66
M 2,55
2,18
M 38
2,410
M 48
3,120
M 59,53,725
M 6124,630
M 8166
45
blankISO 14583
künftig ISO / EN
A2
bei M 3, Kopf nach DIN 7985 TX
-
Abmessung VPE Preis €
2 x 4 1000 4,452 x 5 1000 4,252 x 6 1000 3,852 x 8 1000 3,852 x 10 1000 3,952 x 12 1000 4,202 x 16 1000 5,302,5 x 4 1000 4,452,5 x 5 1000 4,252,5 x 6 1000 3,952,5 x 8 1000 4,102,5 x 10 1000 4,352,5 x 12 1000 4,652,5 x 14 1000 5,302,5 x 16 1000 5,303 x 4 1000 4,603 x 5 1000 4,303 x 6 1000 3,953 x 8 1000 3,653 x 10 1000 3,503 x 12 1000 3,853 x 14 1000 5,603 x 16 1000 4,503 x 18 1000 6,203 x 20 1000 5,003 x 22 500 7,853 x 25 500 6,303 x 30 500 8,953 x 35 500 13,903 x 40 500 15,053 x 45 500 17,554 x 5 500 7,004 x 6 500 6,204 x 8 500 5,704 x 10 500 5,154 x 12 500 5,004 x 14 500 7,154 x 16 500 5,754 x 18 500 8,154 x 20 500 6,504 x 22 500 8,95
Abmessung VPE Preis €
4 x 25 500 7,204 x 30 500 9,754 x 35 500 15,654 x 40 500 16,554 x 45 500 29,454 x 50 500 29,455 x 6 500 11,055 x 8 500 8,655 x 10 500 7,305 x 12 500 7,505 x 14 500 10,405 x 16 500 8,355 x 18 500 10,955 x 20 500 8,805 x 22 500 12,705 x 25 500 10,155 x 30 500 12,005 x 35 500 14,855 x 40 500 19,355 x 45 500 23,305 x 50 500 30,505 x 60 500 35,156 x 8 200 13,306 x 10 200 12,306 x 12 200 10,656 x 16 200 11,606 x 20 200 13,306 x 25 200 14,706 x 30 200 18,156 x 35 200 19,456 x 40 200 22,556 x 45 100 26,706 x 50 100 35,256 x 60 100 43,206 x 70 100 51,156 x 80 100 58,908 x 16 100 27,908 x 20 100 30,258 x 50 100 67,15
Seite 368 04 / 2019
Preise per 100 Stück
Linsensenkschrauben mit TX
Cross recessed raised cheese head screws
ddkkTX-Nr.
M 23,81,2
6
M 2,54,71,5
8
M 35,51,710
M 48,42,725
M 59,32,725
M 611,33,330
M 815,84,745
blankISO 14584
künftig ISO / EN
A2-
Abmessung VPE Preis €
2 x 3 1000 4,452 x 4 1000 4,452 x 6 1000 4,002 x 8 1000 4,002 x 10 1000 4,002,5 x 4 1000 4,452,5 x 5 1000 4,252,5 x 6 1000 3,952,5 x 8 1000 4,102,5 x 10 1000 4,352,5 x 12 1000 4,652,5 x 14 1000 5,202,5 x 16 1000 5,202,5 x 18 1000 5,503 x 5 1000 4,303 x 6 1000 3,953 x 8 1000 3,653 x 10 1000 3,503 x 12 1000 3,853 x 16 500 4,503 x 20 500 5,003 x 25 500 6,303 x 30 500 8,954 x 5 500 6,204 x 6 500 6,204 x 8 500 5,704 x 10 500 5,154 x 12 500 5,004 x 16 500 5,754 x 20 500 6,504 x 25 500 7,204 x 30 500 9,755 x 6 500 11,055 x 8 500 8,655 x 10 500 7,305 x 12 500 7,505 x 14 500 10,405 x 16 500 8,355 x 20 500 8,805 x 25 500 10,155 x 30 500 12,00
Abmessung VPE Preis €
5 x 35 200 14,855 x 40 500 19,356 x 10 500 12,306 x 12 500 10,656 x 14 500 11,006 x 16 500 11,606 x 20 200 13,306 x 25 200 14,706 x 30 200 18,156 x 35 200 19,456 x 40 200 22,556 x 45 200 26,706 x 50 200 35,256 x 55 200 39,006 x 60 200 43,208 x 10 200 45,458 x 12 200 45,458 x 14 200 45,458 x 16 200 27,908 x 20 200 30,258 x 25 200 32,308 x 30 200 37,458 x 35 200 41,008 x 40 200 48,05
Preise per 100 Stück
04 / 2019 Seite 369
SDS-plus Hammerbohrer
l Gesamtlängel1 Arbeitslänge
4 x 11011050
5 x 11011050
5 x 160160100
5,5 x 160160100
6 x 11011050
6 x 160160100
6,5 x 160160100
7 x 11011050
7 x 160160100
8 x 11011050
8 x 160160100
8 x 210210150
10 x 160160100
10 x 210210150
10 x 260260200
SDS-plus4x4 Zentro
künftig ISO / EN
HM-
Abmessung VPE Preis €
5 x 110/50 1 8,575 x 160/100 1 9,475 x 260/200 1 17,806 x 110/50 1 8,626 x 160/100 1 9,356 x 210/150 1 11,866 x 260/200 1 15,696 x 310/250 1 15,026 x 310/250 1 22,286,5 x 160/100 1 13,136,5 x 260/200 1 22,886,5 x 310/260 1 26,427 x 110/50 1 12,237 x 160/100 1 13,188 x 110/50 1 10,838 x 160/100 1 11,378 x 210/150 1 12,998 x 260/200 1 15,818 x 310/250 1 20,248 x 360/300 1 29,958 x 460/400 1 33,358 x 600/550 1 24,7710 x 110/50 1 11,5110 x 160/100 1 12,0410 x 210/150 1 13,8910 x 260/200 1 16,6610 x 310/250 1 21,1510 x 360/300 1 32,7510 x 450/4000 1 35,7612 x 160/100 1 13,7712 x 210/150 1 16,7712 x 210/150 1 81,3712 x 260/200 1 19,5212 x 310/250 1 26,3512 x 450/400 1 38,8112 x 600/550 1 51,2714 x 1000/950 1 126,0314 x 160/100 1 19,7214 x 210/150 1 26,1114 x 260/200 1 30,6614 x 310/250 1 32,58
Abmessung VPE Preis €
14 x 450/400 1 40,2414 x 600/550 1 55,3615 x 160/100 1 30,3115 x 210/150 1 33,0715 x 260/200 1 36,3015 x 460/400 1 48,6216 x 1000/950 1 141,8616 x 160/100 1 31,2116 x 210/150 1 34,9416 x 260/200 1 38,9316 x 310/250 1 41,5716 x 450/400 1 51,2716 x 600/550 1 67,6918 x 250/200 1 40,6318 x 450/400 1 53,1720 x 250/200 1 46,6420 x 450/400 1 60,4422 x 250/200 1 57,4422 x 450/400 1 73,2422 x 600/550 1 72,1024 x 250/200 1 70,6424 x 450/400 1 79,8225 x 250/200 1 74,2125 x 450/400 1 89,2128 x 450/400 1 94,0530 x 250/200 1 86,6230 x 450/400 1 98,09
Seite 370 04 / 2019
Preise per Stück
Sicherungsscheiben S Schnorr
Schnorr - locking washers S
Nennmaßd1d2s
1,61,73,2
0,35
22,2
40,35
2,52,74,8
0,45
33,25,5
0,45
3,53,7
60,45
44,3
70,5
55,3
90,6
66,4100,7
6,356,79,50,7
77,4120,7
88,4139,8
1010,5
161
11,111,615,9
1
1213181,1
12,713,7
191,1
brüniertSchnorr
künftig ISO / EN
Stahl
Schnorr - rondelle de sécurité 'S'
-
Abmessung VPE Preis €
d 2 mm 2000 7,90d 2,5 mm 2000 7,90d 3 mm 2000 7,90d 4 mm 2000 8,60d 5 mm 1000 12,15d 6 mm 1000 13,75d 8 mm 1000 18,75d 10 mm 1000 27,85d 12 mm 500 38,05d 14 mm 500 52,10d 16 mm 500 65,85d 18 mm 250 129,35d 20 mm 250 147,70d 24 mm 100 238,95d 30 mm 100 384,65
Preise per 1000 Stück
04 / 2019 Seite 371
Sicherungsscheiben S Schnorr verz.
Schnorr - locking washers S
Nennmaßd1d2s
1,61,73,2
0,35
22,2
40,35
2,52,74,8
0,45
33,25,5
0,45
3,53,7
60,45
44,3
70,5
55,3
90,6
66,4100,7
6,356,79,50,7
77,4120,7
88,4139,8
1010,5
161
11,111,615,9
1
1213181,1
12,713,7
191,1
verz. blauSchnorr
künftig ISO / EN
Stahl
Schnorr - rondelle de sécurité 'S'
-
Abmessung VPE Preis €
d 2 mm 2000 15,00d 2,5 mm 2000 8,35d 3 mm 2000 8,45d 4 mm 1000 9,30d 5 mm 1000 13,35d 6 mm 1000 15,50d 8 mm 1000 21,60d 10 mm 1000 32,75d 12 mm 500 44,10d 14 mm 500 61,05d 16 mm 500 78,50d 18 mm 250 130,80d 20 mm 250 171,75
Seite 372 04 / 2019
Preise per 1000 Stück
Stockschrauben mit aufgewalztem Holzgewinde
Wood to metal dowel screws with rolled wood screw
d M 6 M 8 M 10
verz. blauStocksch.
künftig ISO / EN
Stahl
Vis double filets, bois-metaux
-
Abmessung VPE Preis €
6 x 40 100 13,106 x 50 100 14,456 x 60 100 15,356 x 70 100 17,506 x 80 100 18,406 x 90 100 21,456 x 100 100 24,556 x 120 100 25,608 x 50 100 10,108 x 60 100 12,208 x 70 100 14,458 x 80 100 16,408 x 90 100 18,808 x 100 100 20,108 x 120 100 24,558 x 140 100 28,858 x 150 100 31,458 x 160 100 35,008 x 180 100 40,358 x 200 100 46,8510 x 60 100 18,4010 x 80 100 24,5510 x 90 100 27,9510 x 100 100 31,0010 x 120 100 38,9010 x 140 100 50,2510 x 150 100 54,6510 x 160 100 63,4010 x 180 100 73,9010 x 200 100 78,2012 x 80 100 71,6512 x 100 100 81,7512 x 120 100 95,2512 x 140 100 102,7012 x 160 100 118,0012 x 180 100 144,2012 x 200 100 161,65
Preise per 100 Stück
04 / 2019 Seite 373
SeiteNormBezeichnung: Material Oberfläche
Index nach Bezeichnung
1AMAbstandsbolzen A mit Innen/Außengewinde Stahl verz. blau
2AMAbstandsbolzen A mit Innen/Außengewinde Messing vernickelt
3BMAbstandsbolzen B mit Innen/Innengewinde Stahl verz. blau
4BMAbstandsbolzen B mit Innen/Innengewinde Messing vernickelt
83444Augenschrauben Form B 4.8 blank
2497337Blindniete Flachkopf Alu/Stahl Alu verz. blau
55179Bohrbuchse HM geschliffen
2587504 MHBohrschrauben Linsenkopf Kreuzschlitz gehärtet verz. blau
2597504 MTBohrschrauben Linsenkopf mit TX gehärtet verz. blau
2607504 KBohrschrauben Sechskantkopf mit Bund gehärtet verz. blau
2617504 OHBohrschrauben Senkkopf Kreuzschlitz gehärtet verz. blau
2627504 OTBohrschrauben Senkkopf mit TX gehärtet verz. blau
50172Bundbohrbuchse HM geschliffen
17EnsatEnsatbuchsen gehärtet verz. blau
18EnsatEnsatbuchsen A1 blank
19EnsatEnsatbuchsen A2 blank
2296798 AFächerscheiben Form A Stahl brüniert
2306798 AFächerscheiben Form A Stahl verz. blau
2316798 AFächerscheiben Form A A2 blank
2326798 IFächerscheiben Form I Stahl brüniert
2336798 IFächerscheiben Form I Stahl verz. blau
2346798 IFächerscheiben Form I A2 blank
5FBSFassadenbauschrauben Typ A A2 mit 16mm Dichtsch. A2 blank
6FBSFassadenbauschrauben Typ BZ A2 mit 16mm Dichtsch. A2 blank
38127 BFederringe Form B Stahl brüniert
39127 BFederringe Form B Stahl verz. blau
40127 BFederringe Form B A2 blank
2707980Federringe für Zylinderschrauben Stahl brüniert
2717980Federringe für Zylinderschrauben Stahl verz. blau
2727980Federringe für Zylinderschrauben A2 blank
44137 AFederscheiben Form A, gewölbt Stahl brüniert
45137 AFederscheiben Form A, gewölbt Stahl verz. blau
46137 AFederscheiben Form A, gewölbt A2 blank
47137 BFederscheiben Form B, gewellt Stahl brüniert
48137 BFederscheiben Form B, gewellt Stahl verz. blau
49137 BFederscheiben Form B, gewellt A2 blank
2456923Flachbundmutter 8 verz. blau
2466923Flachbundmutter mit Sperrzähnen 8 verz. blau
2476923Flachbundmutter mit Sperrzähnen A2 blank
92467Flache Rändelmuttern 5.8 blank
93467Flache Rändelmuttern 5.8 verz. blau
94467Flache Rändelmuttern A2 blank
112653Flache Rändelschrauben 5.8 blank
113653Flache Rändelschrauben 5.8 verz. blau
3185Flachkopfschrauben mit Schlitz 4.8 verz. blau
3285Flachkopfschrauben mit Schlitz A2 blank
130923Flachkopfschrauben mit Schlitz und Ansatz 5.8 blank
110603Flachrundschrauben mit Vierkantansatz Stahl verz. blau
111603Flachrundschrauben mit Vierkantansatz A2 blank
60315Flügelmuttern Stahl verz. blau
61315Flügelmuttern A2 blank
62316Flügelschrauben Stahl verz. blau
63316Flügelschrauben A2 blank
2537500 CEGewindefurchende Schrauben mit Linsenkopf und PZD gehärtet verz. blau
2547500 PEGewindefurchende Schrauben mit Linsenkopf und TX gehärtet verz. blau
2557500 DEGewindefurchende Schrauben mit Sechskantkopf gehärtet verz. blau
2567500 MEGewindefurchende Schrauben mit Senkkopf und PZD gehärtet verz. blau
2577500 EEGewindefurchende Schrauben mit Zyl-Kopf und I-6Kt gehärtet verz. blau
188976Gewindestange 4.8 blank
189976Gewindestange 4.8 verz. blau
190976Gewindestange 8.8 blank
191976Gewindestange 8.8 verz. blau
192976Gewindestange A2 blank
04 / 2019 A 1
SeiteNormBezeichnung: Material Oberfläche
Index nach Bezeichnung
3054026Gewindestifte mit Innensechskant und Kegelkuppe 45H brüniert
3074026Gewindestifte mit Innensechskant und Kegelkuppe 45H verz. blau
3094026Gewindestifte mit Innensechskant und Kegelkuppe A2 blank
3164029Gewindestifte mit Innensechskant und Ringschneide 45H brüniert
3184029Gewindestifte mit Innensechskant und Ringschneide 45H verz. blau
3194029Gewindestifte mit Innensechskant und Ringschneide A2 blank
3104027Gewindestifte mit Innensechskant und Spitze 45H brüniert
3114027Gewindestifte mit Innensechskant und Spitze 45H verz. blau
3124027Gewindestifte mit Innensechskant und Spitze A2 blank
3134028Gewindestifte mit Innensechskant und Zapfen 45H brüniert
3144028Gewindestifte mit Innensechskant und Zapfen 45H verz. blau
3154028Gewindestifte mit Innensechskant und Zapfen A2 blank
12HECOHeco-Span Senkkopf mit Zahngeometrie und TX Stahl verz. blau
41128 AHochspann-Federringe Form A Stahl brüniert
42128 AHochspann-Federringe Form A Stahl verz. blau
43128 AHochspann-Federringe Form A A2 blank
89466Hohe Rändelmuttern 5.8 blank
90466Hohe Rändelmuttern 5.8 verz. blau
91466Hohe Rändelmuttern A2 blank
86464Hohe Rändelschrauben 5.8 blank
87464Hohe Rändelschrauben 5.8 verz. blau
88464Hohe Rändelschrauben A2 blank
64338HSS-Spiralbohrer HSS geschliffen
65338HSS-Spiralbohrer HSSE geschliffen
2051587Hutmuttern hohe Form Stahl verz. blau
2061587Hutmuttern hohe Form A2 blank
2677977Kegelstifte mit Gewindezapfen und konstanten Zapfe 5.8 blank
2687978 AKegelstifte mit Innengewinde 5.8 blank
211Kegelstifte, Form B, gedreht Stahl blank
9A9022Kotflügelscheiben HV100 verz. blau
10A9022Kotflügelscheiben A2 blank
2081816Kreuzlochmuttern metrisches Feingewinde 5.8 blank
2737981 CLinsen-Blechschrauben mit PH-Kreuzschlitz Stahl verz. blau
2747981 CLinsen-Blechschrauben mit PH-Kreuzschlitz A2 blank
2757981 CLinsen-Blechschrauben mit TX Stahl verz. blau
2767981 CLinsen-Blechschrauben mit TX A2 blank
3457380-2Linsen-Flanschkopfschraube mit Innensechskant 10.9 brüniert
3467380-2Linsen-Flanschkopfschraube mit Innensechskant 10.9 verz. blau
3477380-2Linsen-Flanschkopfschraube mit Innensechskant A2 blank
3427380-1Linsenschrauben mit Innensechskant 10.9 brüniert
3437380-1Linsenschrauben mit Innensechskant 10.9 verz. blau
3447380-1Linsenschrauben mit Innensechskant A2 blank
2877985Linsenschrauben mit PH-Kreuzschlitz 4.8 verz. blau
2887985Linsenschrauben mit PH-Kreuzschlitz A2 blank
36714583Linsenschrauben mit TX 4.8 verz. blau
36814583Linsenschrauben mit TX A2 blank
2817983 CLinsensenk-Blechschrauben mit PH-Kreuzschlitz CH Stahl verz. blau
2827983 CLinsensenk-Blechschrauben mit PH-Kreuzschlitz CH A2 blank
186966Linsensenkschrauben mit PH-Kreuzschlitz 4.8 verz. blau
187966Linsensenkschrauben mit PH-Kreuzschlitz A2 blank
36914584Linsensenkschrauben mit TX A2 blank
14HECOMulti-Monti plus Schraubanker 10.9 verz. blau
15HECOMulti-Monti plus Schraubanker 10.9 verz. blau
16HECOMulti-Monti plus Schraubanker 10.9 verz. blau
2071804Nutmuttern metrisches Feingewinde 5.8 blank
20Art. 48Ösenschrauben mit metrischem Gewinde Art. 48 Stahl verz. blau
2386885Paßfedern Form A Stahl blank
198988Paßscheiben PS Stahl blank
2928140Re-Coil Gewindeeinsatz Edelstahl A2 blank
2938140Re-Coil Reparatursatz Stahl blank
107582Ringmuttern C15E blank
108582Ringmuttern C15E verz. blau
109582Ringmuttern A2 blank
A 2 04 / 2019
SeiteNormBezeichnung: Material Oberfläche
Index nach Bezeichnung
104580Ringschrauben C15E blank
105580Ringschrauben C15E verz. blau
106580Ringschrauben A2 blank
66431Rohrmuttern 5.8 blank
70433Scheiben HV140 verz. blau
71433Scheiben A2 blank
2949021Scheiben HV140 verz. blau
2959021Scheiben A2 blank
2031441Scheiben Ausführung grob für Bolzen HV100 blank
2041441Scheiben Ausführung grob für Bolzen HV100 verz. blau
2011440Scheiben Ausführung mittel für Bolzen HV100 blank
2021440Scheiben Ausführung mittel für Bolzen HV100 verz. blau
37125 AScheiben Form A A2 blank
3397089Scheiben Form A HV200 blank
3407089Scheiben Form A HV200 verz. blau
3417089Scheiben Form A HV200 tzn
2001052Scheiben für Holzverbinder HV100 verz. blau
2517349Scheiben für Schrauben mit schweren Spannhülsen HV100 verz. blau
2527349Scheiben für Schrauben mit schweren Spannhülsen A2 blank
2897989Scheiben für Stahlkonstruktionen Stahl verz. blau
2907989Scheiben für Stahlkonstruktionen Stahl tzn
85463Scheiben mit 2 Lappen HV100 blank
67432Scheiben mit Außennase HV100 blank
68432Scheiben mit Außennase HV100 verz. blau
69432Scheiben mit Außennase A2 blank
3393Scheiben mit Lappen HV100 blank
3493Scheiben mit Lappen A2 blank
11A9055Scheiben mit Neoprendichtung A2 blank
29814399Scheiben rund für HV-Verbindungen in Stahlkonstruktionen 14399-06 HV300 tzn
74435Scheiben vierkant für I-Träger Neigung 14% 100 HV HV100 verz. blau
75435Scheiben vierkant für I-Träger Neigung 14% 100 HV HV100 tzn
72434Scheiben vierkant für U-Träger Neigung 8% 100 HV HV100 verz. blau
73434Scheiben vierkant für U-Träger Neigung 8% 100 HV HV100 tzn
76436Scheiben vierkant vorwiegend für Holzkonstruktione HV100 verz. blau
82440Scheiben vorwiegend für Holzkonstruktionen Form R Stahl verz. blau
2196340Scheiben, gehärtet gehärtet brüniert
2206340Scheiben, gehärtet gehärtet verz. blau
2103017Schlauchschellen Breite 9 mm Stahl verz. blau
2113017Schlauchschellen Breite 9 mm A2 verz. blau
7SBSSchnellbauschrauben mit Grobgewinde, Trompetenkopf 10.9 phosphatiert
3704x4 ZentroSDS Hammerbohrer HM SDS-plus
2657976 CSechskant-Blechschrauben Stahl verz. blau
2667976 CSechskant-Blechschrauben A2 blank
102571Sechskant-Holzschrauben Stahl verz. blau
103571Sechskant-Holzschrauben A2 blank
155934Sechskantmuttern 8 blank
156934Sechskantmuttern 8 verz. blau
157934Sechskantmuttern 8 tzn
158934Sechskantmuttern 10 brüniert
159934Sechskantmuttern 10 verz. blau
160934Sechskantmuttern A2 blank
3204032Sechskantmuttern 5.2 blank
3214032Sechskantmuttern 5.2 verz. blau
2146330Sechskantmuttern 1,5 d hoch Ausführung A 10.9 brüniert
2156330Sechskantmuttern 1,5 d hoch Ausführung B 5.8 blank
2166331Sechskantmuttern 1,5 d hoch mit Bund 10.9 brüniert
2176331Sechskantmuttern 1,5 d hoch mit Bund 10.9 verz. blau
2186334Sechskantmuttern 3 d hoch Stahl verz. blau
161934Sechskantmuttern Linksgewinde 8 blank
162934Sechskantmuttern Linksgewinde 8 verz. blau
163934Sechskantmuttern Linksgewinde A2 blank
29914399Sechskantmuttern mit großen Schlüsselweiten für HV Verbindungen 143 10.9 tzn
2486925Sechskantmuttern mit Klemmteil 8 verz. blau
04 / 2019 A 3
SeiteNormBezeichnung: Material Oberfläche
Index nach Bezeichnung
193980Sechskantmuttern mit Klemmteil, Form V, Ganzmetall 8 verz. blau
194980Sechskantmuttern mit Klemmteil, Form V, Ganzmetall A2 blank
77439Sechskantmuttern niedrige Form 04 blank
78439Sechskantmuttern niedrige Form 04 verz. blau
79439Sechskantmuttern niedrige Form A2 blank
80439Sechskantmuttern niedrige Form Feingewinde 04 blank
81439Sechskantmuttern niedrige Form Feingewinde 04 verz. blau
195982Sechskantmuttern selbstsichernd hohe Form A2 blank
196985Sechskantmuttern selbstsichernd niedrige Form 8 verz. blau
197985Sechskantmuttern selbstsichernd niedrige Form A2 blank
2446921Sechskantschrauben mit Flansch A2 blank
143933Sechskantschrauben mit Gewinde bis Kopf 8.8 brüniert
146933Sechskantschrauben mit Gewinde bis Kopf 8.8 verz. blau
149933Sechskantschrauben mit Gewinde bis Kopf 10.9 brüniert
150933Sechskantschrauben mit Gewinde bis Kopf 10.9 verz. blau
152933Sechskantschrauben mit Gewinde bis Kopf A2 blank
175961Sechskantschrauben mit Gewinde bis Kopf Feingewind 8.8 brüniert
176961Sechskantschrauben mit Gewinde bis Kopf Feingewind 8.8 verz. blau
177961Sechskantschrauben mit Gewinde bis Kopf Feingewind 10.9 brüniert
30014399Sechskantschrauben mit großen Schlüsselweiten für HV Verbindungen 1 10.9 tzn
134931Sechskantschrauben mit Schaft 8.8 brüniert
137931Sechskantschrauben mit Schaft 8.8 verz. blau
139931Sechskantschrauben mit Schaft 10.9 brüniert
141931Sechskantschrauben mit Schaft A2 blank
172960Sechskantschrauben mit Schaft Feingewinde 8.8 brüniert
173960Sechskantschrauben mit Schaft Feingewinde 8.8 verz. blau
174960Sechskantschrauben mit Schaft Feingewinde 10.9 brüniert
2917990Sechskantschrauben mit Sechskantmuttern für Stahlk 4.8 tzn
132929Sechskant-Schweißmuttern 8 blank
133929Sechskant-Schweißmuttern A2 blank
129911Sechskantstiftschlüssel vergütet 10.9 brüniert
2777982 CSenk-Blechschrauben mit PH-Kreuzschlitz CH Stahl verz. blau
2787982 CSenk-Blechschrauben mit PH-Kreuzschlitz CH A2 blank
2797982 CSenk-Blechschrauben mit TX CT Stahl verz. blau
2807982 CSenk-Blechschrauben mit TX CT A2 blank
35410642Senkschrauben mit Innensechskant 8.8 brüniert
35510642Senkschrauben mit Innensechskant 8.8 verz. blau
35610642Senkschrauben mit Innensechskant 10.9 brüniert
35810642Senkschrauben mit Innensechskant 10.9 verz. blau
35910642Senkschrauben mit Innensechskant A2 blank
182965Senkschrauben mit PH-Kreuzschlitz 4.8 verz. blau
183965Senkschrauben mit PH-Kreuzschlitz A2 blank
178963Senkschrauben mit Schlitz 4.8 verz. blau
180963Senkschrauben mit Schlitz A2 blank
184965Senkschrauben mit TX 4.8 verz. blau
185965Senkschrauben mit TX A2 blank
36514581Senkschrauben mit TX 4.8 verz. blau
36614581Senkschrauben mit TX A2 blank
84462Sicherungsbleche mit Innennase für Nutmuttern DIN HV100 blank
2637967Sicherungsmuttern Stahl verz. blau
2647967Sicherungsmuttern Stahl tzn
97472Sicherungsringe für Bohrungen Stahl brüniert
98472Sicherungsringe für Bohrungen A2 blank
95471Sicherungsringe für Wellen Stahl brüniert
96471Sicherungsringe für Wellen A2 blank
2356799Sicherungsscheiben für Wellen Stahl brüniert
2366799Sicherungsscheiben für Wellen Stahl verz. blau
2376799Sicherungsscheiben für Wellen A2 blank
371SchnorrSicherungsscheiben S Schnorr Stahl brüniert
372SchnorrSicherungsscheiben S Schnorr Stahl verz. blau
2216796Spannscheiben für Schraubverbindungen Stahl brüniert
2226796Spannscheiben für Schraubverbindungen Stahl verz. blau
36113337Spannstifte (Spannhülsen) leichte Ausführung Stahl brüniert
A 4 04 / 2019
SeiteNormBezeichnung: Material Oberfläche
Index nach Bezeichnung
3508752Spannstifte (Spannhülsen) schwere Ausführung Stahl brüniert
3538752Spannstifte (Spannhülsen) schwere Ausführung A2 blank
8SPSSpenglerschrauben mit Dichtscheibe 15 mm mit TX A2 blank
3498750Spiral-Spannstifte Regelausführung Stahl brüniert
3488748Spiral-Spannstifte schwere Ausführung Stahl brüniert
3594Splinte Stahl verz. blau
3694Splinte A2 blank
114705Stellringe Form A mit Gewindestiften Stahl blank
115705Stellringe Form A mit Gewindestiften Stahl verz. blau
116705Stellringe Form A mit Gewindestiften A2 blank
164938Stiftschrauben Einschraubende ca. 1 d 5.8 blank
165938Stiftschrauben Einschraubende ca. 1 d 8.8 brüniert
166938Stiftschrauben Einschraubende ca. 1 d 8.8 verz. blau
167939Stiftschrauben Einschraubende ca. 1,25 d 5.8 blank
168939Stiftschrauben Einschraubende ca. 1,25 d 5.8 verz. blau
169939Stiftschrauben Einschraubende ca. 1,25 d 8.8 brüniert
170939Stiftschrauben Einschraubende ca. 1,25 d 8.8 verz. blau
171939Stiftschrauben Einschraubende ca. 1,25 d A2 blank
373Stocksch.Stockschrauben mit aufgewalztem Holzgewinde Stahl verz. blau
2092093Tellerfedern Stahl brüniert
99508T-Nutensteine 8 blank
100508T-Nutensteine 10 blank
296MuffeVerbindungsmuttern (Distanzmuttern), rund Stahl verz. blau
297MuffeVerbindungsmuttern (Distanzmuttern), Sechskant Stahl verz. blau
125910Verschlußschrauben mit Bund und Außensechskant 5.8 blank
127910Verschlußschrauben mit Bund und Außensechskant 5.8 verz. blau
121908Verschlußschrauben mit Bund und Innensechskant 5.8 blank
123908Verschlußschrauben mit Bund und Innensechskant 5.8 verz. blau
117906Verschlußschrauben mit Innensechskant 5.8 blank
119906Verschlußschrauben mit Innensechskant 5.8 verz. blau
101562Vierkantmuttern niedrige Form 4.8 verz. blau
131928Vierkant-Schweißmuttern 8 blank
2236797 AZahnscheiben außenverzahnt Stahl brüniert
2246797 AZahnscheiben außenverzahnt Stahl verz. blau
2256797 AZahnscheiben außenverzahnt A2 blank
2266797 IZahnscheiben innenverzahnt Stahl brüniert
2276797 IZahnscheiben innenverzahnt Stahl verz. blau
2286797 IZahnscheiben innenverzahnt A2 blank
3224762Zylinderschrauben mit Innensechskant 8.8 brüniert
3254762Zylinderschrauben mit Innensechskant 8.8 verz. blau
3274762Zylinderschrauben mit Innensechskant 10.9 brüniert
3304762Zylinderschrauben mit Innensechskant 10.9 verz. blau
3324762Zylinderschrauben mit Innensechskant 12.9 brüniert
3354762Zylinderschrauben mit Innensechskant 12.9 verz. blau
3364762Zylinderschrauben mit Innensechskant A2 blank
2406912Zylinderschrauben mit Innensechskant und niedrigem 8.8 brüniert
2426912Zylinderschrauben mit Innensechskant und niedrigem 8.8 verz. blau
2436912Zylinderschrauben mit Innensechskant und niedrigem A2 blank
2837984Zylinderschrauben mit Innensechskant und niedrigem Kopf 8.8 brüniert
2857984Zylinderschrauben mit Innensechskant und niedrigem Kopf 8.8 verz. blau
2867984Zylinderschrauben mit Innensechskant und niedrigem Kopf A2 blank
2784Zylinderschrauben mit Schlitz 4.8 verz. blau
2984Zylinderschrauben mit Schlitz A2 blank
36214579Zylinderschrauben mit TX A2 blank
36414580Zylinderschrauben mit TX und niedrigem Kopf A2 blank
2126325Zylinderstifte gehärtet, Toleranzfeld m6 gehärtet blank
2697979 DZylinderstifte mit Innengewinde gehärtet Tol. m6 gehärtet blank
237Zylinderstifte Toleranzfeld h8 Stahl blank
3012338Zylinderstifte Toleranzfeld h8 Stahl blank
247Zylinderstifte Toleranzfeld m6 Stahl blank
267Zylinderstifte Toleranzfeld m6 A1 blank
3022338Zylinderstifte Toleranzfeld m6 Stahl blank
3042338Zylinderstifte Toleranzfeld m6 A1 blank
04 / 2019 A 5
SeiteNorm Bezeichnung: Material Oberfläche
Index nach DIN-Nummer
1AM Abstandsbolzen A mit Innen/Außengewinde Stahl verz. blau
2AM Abstandsbolzen A mit Innen/Außengewinde Messing vernickelt
3BM Abstandsbolzen B mit Innen/Innengewinde Stahl verz. blau
4BM Abstandsbolzen B mit Innen/Innengewinde Messing vernickelt
5FBS Fassadenbauschrauben Typ A A2 mit 16mm Dichtsch. A2 blank
6FBS Fassadenbauschrauben Typ BZ A2 mit 16mm Dichtsch. A2 blank
7SBS Schnellbauschrauben mit Grobgewinde, Trompetenkopf 10.9 phosphatiert
8SPS Spenglerschrauben mit Dichtscheibe 15 mm mit TX A2 blank
9A9022 Kotflügelscheiben HV100 verz. blau
10A9022 Kotflügelscheiben A2 blank
11A9055 Scheiben mit Neoprendichtung A2 blank
12HECO Heco-Span Senkkopf mit Zahngeometrie und TX Stahl verz. blau
14HECO Multi-Monti plus Schraubanker 10.9 verz. blau
15HECO Multi-Monti plus Schraubanker 10.9 verz. blau
16HECO Multi-Monti plus Schraubanker 10.9 verz. blau
17Ensat Ensatbuchsen gehärtet verz. blau
18Ensat Ensatbuchsen A1 blank
19Ensat Ensatbuchsen A2 blank
20Art. 48 Ösenschrauben mit metrischem Gewinde Art. 48 Stahl verz. blau
211 Kegelstifte, Form B, gedreht Stahl blank
237 Zylinderstifte Toleranzfeld h8 Stahl blank
247 Zylinderstifte Toleranzfeld m6 Stahl blank
267 Zylinderstifte Toleranzfeld m6 A1 blank
2784 Zylinderschrauben mit Schlitz 4.8 verz. blau
2984 Zylinderschrauben mit Schlitz A2 blank
3185 Flachkopfschrauben mit Schlitz 4.8 verz. blau
3285 Flachkopfschrauben mit Schlitz A2 blank
3393 Scheiben mit Lappen HV100 blank
3493 Scheiben mit Lappen A2 blank
3594 Splinte Stahl verz. blau
3694 Splinte A2 blank
37125 A Scheiben Form A A2 blank
38127 B Federringe Form B Stahl brüniert
39127 B Federringe Form B Stahl verz. blau
40127 B Federringe Form B A2 blank
41128 A Hochspann-Federringe Form A Stahl brüniert
42128 A Hochspann-Federringe Form A Stahl verz. blau
43128 A Hochspann-Federringe Form A A2 blank
44137 A Federscheiben Form A, gewölbt Stahl brüniert
45137 A Federscheiben Form A, gewölbt Stahl verz. blau
46137 A Federscheiben Form A, gewölbt A2 blank
47137 B Federscheiben Form B, gewellt Stahl brüniert
48137 B Federscheiben Form B, gewellt Stahl verz. blau
49137 B Federscheiben Form B, gewellt A2 blank
50172 Bundbohrbuchse HM geschliffen
55179 Bohrbuchse HM geschliffen
60315 Flügelmuttern Stahl verz. blau
61315 Flügelmuttern A2 blank
62316 Flügelschrauben Stahl verz. blau
63316 Flügelschrauben A2 blank
64338 HSS-Spiralbohrer HSS geschliffen
65338 HSS-Spiralbohrer HSSE geschliffen
66431 Rohrmuttern 5.8 blank
67432 Scheiben mit Außennase HV100 blank
68432 Scheiben mit Außennase HV100 verz. blau
69432 Scheiben mit Außennase A2 blank
70433 Scheiben HV140 verz. blau
71433 Scheiben A2 blank
72434 Scheiben vierkant für U-Träger Neigung 8% 100 HV HV100 verz. blau
73434 Scheiben vierkant für U-Träger Neigung 8% 100 HV HV100 tzn
74435 Scheiben vierkant für I-Träger Neigung 14% 100 HV HV100 verz. blau
75435 Scheiben vierkant für I-Träger Neigung 14% 100 HV HV100 tzn
76436 Scheiben vierkant vorwiegend für Holzkonstruktione HV100 verz. blau
04 / 2019 A 6
SeiteNorm Bezeichnung: Material Oberfläche
Index nach DIN-Nummer
77439 Sechskantmuttern niedrige Form 04 blank
78439 Sechskantmuttern niedrige Form 04 verz. blau
79439 Sechskantmuttern niedrige Form A2 blank
80439 Sechskantmuttern niedrige Form Feingewinde 04 blank
81439 Sechskantmuttern niedrige Form Feingewinde 04 verz. blau
82440 Scheiben vorwiegend für Holzkonstruktionen Form R Stahl verz. blau
83444 Augenschrauben Form B 4.8 blank
84462 Sicherungsbleche mit Innennase für Nutmuttern DIN HV100 blank
85463 Scheiben mit 2 Lappen HV100 blank
86464 Hohe Rändelschrauben 5.8 blank
87464 Hohe Rändelschrauben 5.8 verz. blau
88464 Hohe Rändelschrauben A2 blank
89466 Hohe Rändelmuttern 5.8 blank
90466 Hohe Rändelmuttern 5.8 verz. blau
91466 Hohe Rändelmuttern A2 blank
92467 Flache Rändelmuttern 5.8 blank
93467 Flache Rändelmuttern 5.8 verz. blau
94467 Flache Rändelmuttern A2 blank
95471 Sicherungsringe für Wellen Stahl brüniert
96471 Sicherungsringe für Wellen A2 blank
97472 Sicherungsringe für Bohrungen Stahl brüniert
98472 Sicherungsringe für Bohrungen A2 blank
99508 T-Nutensteine 8 blank
100508 T-Nutensteine 10 blank
101562 Vierkantmuttern niedrige Form 4.8 verz. blau
102571 Sechskant-Holzschrauben Stahl verz. blau
103571 Sechskant-Holzschrauben A2 blank
104580 Ringschrauben C15E blank
105580 Ringschrauben C15E verz. blau
106580 Ringschrauben A2 blank
107582 Ringmuttern C15E blank
108582 Ringmuttern C15E verz. blau
109582 Ringmuttern A2 blank
110603 Flachrundschrauben mit Vierkantansatz Stahl verz. blau
111603 Flachrundschrauben mit Vierkantansatz A2 blank
112653 Flache Rändelschrauben 5.8 blank
113653 Flache Rändelschrauben 5.8 verz. blau
114705 Stellringe Form A mit Gewindestiften Stahl blank
115705 Stellringe Form A mit Gewindestiften Stahl verz. blau
116705 Stellringe Form A mit Gewindestiften A2 blank
117906 Verschlußschrauben mit Innensechskant 5.8 blank
119906 Verschlußschrauben mit Innensechskant 5.8 verz. blau
121908 Verschlußschrauben mit Bund und Innensechskant 5.8 blank
123908 Verschlußschrauben mit Bund und Innensechskant 5.8 verz. blau
125910 Verschlußschrauben mit Bund und Außensechskant 5.8 blank
127910 Verschlußschrauben mit Bund und Außensechskant 5.8 verz. blau
129911 Sechskantstiftschlüssel vergütet 10.9 brüniert
130923 Flachkopfschrauben mit Schlitz und Ansatz 5.8 blank
131928 Vierkant-Schweißmuttern 8 blank
132929 Sechskant-Schweißmuttern 8 blank
133929 Sechskant-Schweißmuttern A2 blank
134931 Sechskantschrauben mit Schaft 8.8 brüniert
137931 Sechskantschrauben mit Schaft 8.8 verz. blau
139931 Sechskantschrauben mit Schaft 10.9 brüniert
141931 Sechskantschrauben mit Schaft A2 blank
143933 Sechskantschrauben mit Gewinde bis Kopf 8.8 brüniert
146933 Sechskantschrauben mit Gewinde bis Kopf 8.8 verz. blau
149933 Sechskantschrauben mit Gewinde bis Kopf 10.9 brüniert
150933 Sechskantschrauben mit Gewinde bis Kopf 10.9 verz. blau
152933 Sechskantschrauben mit Gewinde bis Kopf A2 blank
155934 Sechskantmuttern 8 blank
156934 Sechskantmuttern 8 verz. blau
157934 Sechskantmuttern 8 tzn
A 7 04 / 2019
SeiteNorm Bezeichnung: Material Oberfläche
Index nach DIN-Nummer
158934 Sechskantmuttern 10 brüniert
159934 Sechskantmuttern 10 verz. blau
160934 Sechskantmuttern A2 blank
161934 Sechskantmuttern Linksgewinde 8 blank
162934 Sechskantmuttern Linksgewinde 8 verz. blau
163934 Sechskantmuttern Linksgewinde A2 blank
164938 Stiftschrauben Einschraubende ca. 1 d 5.8 blank
165938 Stiftschrauben Einschraubende ca. 1 d 8.8 brüniert
166938 Stiftschrauben Einschraubende ca. 1 d 8.8 verz. blau
167939 Stiftschrauben Einschraubende ca. 1,25 d 5.8 blank
168939 Stiftschrauben Einschraubende ca. 1,25 d 5.8 verz. blau
169939 Stiftschrauben Einschraubende ca. 1,25 d 8.8 brüniert
170939 Stiftschrauben Einschraubende ca. 1,25 d 8.8 verz. blau
171939 Stiftschrauben Einschraubende ca. 1,25 d A2 blank
172960 Sechskantschrauben mit Schaft Feingewinde 8.8 brüniert
173960 Sechskantschrauben mit Schaft Feingewinde 8.8 verz. blau
174960 Sechskantschrauben mit Schaft Feingewinde 10.9 brüniert
175961 Sechskantschrauben mit Gewinde bis Kopf Feingewind 8.8 brüniert
176961 Sechskantschrauben mit Gewinde bis Kopf Feingewind 8.8 verz. blau
177961 Sechskantschrauben mit Gewinde bis Kopf Feingewind 10.9 brüniert
178963 Senkschrauben mit Schlitz 4.8 verz. blau
180963 Senkschrauben mit Schlitz A2 blank
182965 Senkschrauben mit PH-Kreuzschlitz 4.8 verz. blau
183965 Senkschrauben mit PH-Kreuzschlitz A2 blank
184965 Senkschrauben mit TX 4.8 verz. blau
185965 Senkschrauben mit TX A2 blank
186966 Linsensenkschrauben mit PH-Kreuzschlitz 4.8 verz. blau
187966 Linsensenkschrauben mit PH-Kreuzschlitz A2 blank
188976 Gewindestange 4.8 blank
189976 Gewindestange 4.8 verz. blau
190976 Gewindestange 8.8 blank
191976 Gewindestange 8.8 verz. blau
192976 Gewindestange A2 blank
193980 Sechskantmuttern mit Klemmteil, Form V, Ganzmetall 8 verz. blau
194980 Sechskantmuttern mit Klemmteil, Form V, Ganzmetall A2 blank
195982 Sechskantmuttern selbstsichernd hohe Form A2 blank
196985 Sechskantmuttern selbstsichernd niedrige Form 8 verz. blau
197985 Sechskantmuttern selbstsichernd niedrige Form A2 blank
198988 Paßscheiben PS Stahl blank
2001052 Scheiben für Holzverbinder HV100 verz. blau
2011440 Scheiben Ausführung mittel für Bolzen HV100 blank
2021440 Scheiben Ausführung mittel für Bolzen HV100 verz. blau
2031441 Scheiben Ausführung grob für Bolzen HV100 blank
2041441 Scheiben Ausführung grob für Bolzen HV100 verz. blau
2051587 Hutmuttern hohe Form Stahl verz. blau
2061587 Hutmuttern hohe Form A2 blank
2071804 Nutmuttern metrisches Feingewinde 5.8 blank
2081816 Kreuzlochmuttern metrisches Feingewinde 5.8 blank
2092093 Tellerfedern Stahl brüniert
2103017 Schlauchschellen Breite 9 mm Stahl verz. blau
2113017 Schlauchschellen Breite 9 mm A2 verz. blau
2126325 Zylinderstifte gehärtet, Toleranzfeld m6 gehärtet blank
2146330 Sechskantmuttern 1,5 d hoch Ausführung A 10.9 brüniert
2156330 Sechskantmuttern 1,5 d hoch Ausführung B 5.8 blank
2166331 Sechskantmuttern 1,5 d hoch mit Bund 10.9 brüniert
2176331 Sechskantmuttern 1,5 d hoch mit Bund 10.9 verz. blau
2186334 Sechskantmuttern 3 d hoch Stahl verz. blau
2196340 Scheiben, gehärtet gehärtet brüniert
2206340 Scheiben, gehärtet gehärtet verz. blau
2216796 Spannscheiben für Schraubverbindungen Stahl brüniert
2226796 Spannscheiben für Schraubverbindungen Stahl verz. blau
2236797 A Zahnscheiben außenverzahnt Stahl brüniert
2246797 A Zahnscheiben außenverzahnt Stahl verz. blau
04 / 2019 A 8
SeiteNorm Bezeichnung: Material Oberfläche
Index nach DIN-Nummer
2256797 A Zahnscheiben außenverzahnt A2 blank
2266797 I Zahnscheiben innenverzahnt Stahl brüniert
2276797 I Zahnscheiben innenverzahnt Stahl verz. blau
2286797 I Zahnscheiben innenverzahnt A2 blank
2296798 A Fächerscheiben Form A Stahl brüniert
2306798 A Fächerscheiben Form A Stahl verz. blau
2316798 A Fächerscheiben Form A A2 blank
2326798 I Fächerscheiben Form I Stahl brüniert
2336798 I Fächerscheiben Form I Stahl verz. blau
2346798 I Fächerscheiben Form I A2 blank
2356799 Sicherungsscheiben für Wellen Stahl brüniert
2366799 Sicherungsscheiben für Wellen Stahl verz. blau
2376799 Sicherungsscheiben für Wellen A2 blank
2386885 Paßfedern Form A Stahl blank
2406912 Zylinderschrauben mit Innensechskant und niedrigem 8.8 brüniert
2426912 Zylinderschrauben mit Innensechskant und niedrigem 8.8 verz. blau
2436912 Zylinderschrauben mit Innensechskant und niedrigem A2 blank
2446921 Sechskantschrauben mit Flansch A2 blank
2456923 Flachbundmutter 8 verz. blau
2466923 Flachbundmutter mit Sperrzähnen 8 verz. blau
2476923 Flachbundmutter mit Sperrzähnen A2 blank
2486925 Sechskantmuttern mit Klemmteil 8 verz. blau
2497337 Blindniete Flachkopf Alu/Stahl Alu verz. blau
2517349 Scheiben für Schrauben mit schweren Spannhülsen HV100 verz. blau
2527349 Scheiben für Schrauben mit schweren Spannhülsen A2 blank
2537500 CE Gewindefurchende Schrauben mit Linsenkopf und PZD gehärtet verz. blau
2547500 PE Gewindefurchende Schrauben mit Linsenkopf und TX gehärtet verz. blau
2557500 DE Gewindefurchende Schrauben mit Sechskantkopf gehärtet verz. blau
2567500 ME Gewindefurchende Schrauben mit Senkkopf und PZD gehärtet verz. blau
2577500 EE Gewindefurchende Schrauben mit Zyl-Kopf und I-6Kt gehärtet verz. blau
2587504 MH Bohrschrauben Linsenkopf Kreuzschlitz gehärtet verz. blau
2597504 MT Bohrschrauben Linsenkopf mit TX gehärtet verz. blau
2607504 K Bohrschrauben Sechskantkopf mit Bund gehärtet verz. blau
2617504 OH Bohrschrauben Senkkopf Kreuzschlitz gehärtet verz. blau
2627504 OT Bohrschrauben Senkkopf mit TX gehärtet verz. blau
2637967 Sicherungsmuttern Stahl verz. blau
2647967 Sicherungsmuttern Stahl tzn
2657976 C Sechskant-Blechschrauben Stahl verz. blau
2667976 C Sechskant-Blechschrauben A2 blank
2677977 Kegelstifte mit Gewindezapfen und konstanten Zapfe 5.8 blank
2687978 A Kegelstifte mit Innengewinde 5.8 blank
2697979 D Zylinderstifte mit Innengewinde gehärtet Tol. m6 gehärtet blank
2707980 Federringe für Zylinderschrauben Stahl brüniert
2717980 Federringe für Zylinderschrauben Stahl verz. blau
2727980 Federringe für Zylinderschrauben A2 blank
2737981 C Linsen-Blechschrauben mit PH-Kreuzschlitz Stahl verz. blau
2747981 C Linsen-Blechschrauben mit PH-Kreuzschlitz A2 blank
2757981 C Linsen-Blechschrauben mit TX Stahl verz. blau
2767981 C Linsen-Blechschrauben mit TX A2 blank
2777982 C Senk-Blechschrauben mit PH-Kreuzschlitz CH Stahl verz. blau
2787982 C Senk-Blechschrauben mit PH-Kreuzschlitz CH A2 blank
2797982 C Senk-Blechschrauben mit TX CT Stahl verz. blau
2807982 C Senk-Blechschrauben mit TX CT A2 blank
2817983 C Linsensenk-Blechschrauben mit PH-Kreuzschlitz CH Stahl verz. blau
2827983 C Linsensenk-Blechschrauben mit PH-Kreuzschlitz CH A2 blank
2837984 Zylinderschrauben mit Innensechskant und niedrigem Kopf 8.8 brüniert
2857984 Zylinderschrauben mit Innensechskant und niedrigem Kopf 8.8 verz. blau
2867984 Zylinderschrauben mit Innensechskant und niedrigem Kopf A2 blank
2877985 Linsenschrauben mit PH-Kreuzschlitz 4.8 verz. blau
2887985 Linsenschrauben mit PH-Kreuzschlitz A2 blank
2897989 Scheiben für Stahlkonstruktionen Stahl verz. blau
2907989 Scheiben für Stahlkonstruktionen Stahl tzn
2917990 Sechskantschrauben mit Sechskantmuttern für Stahlk 4.8 tzn
A 9 04 / 2019
SeiteNorm Bezeichnung: Material Oberfläche
Index nach DIN-Nummer
2928140 Re-Coil Gewindeeinsatz Edelstahl A2 blank
2938140 Re-Coil Reparatursatz Stahl blank
2949021 Scheiben HV140 verz. blau
2959021 Scheiben A2 blank
296Muffe Verbindungsmuttern (Distanzmuttern), rund Stahl verz. blau
297Muffe Verbindungsmuttern (Distanzmuttern), Sechskant Stahl verz. blau
29814399 Scheiben rund für HV-Verbindungen in Stahlkonstruktionen 14399-06 HV300 tzn
29914399 Sechskantmuttern mit großen Schlüsselweiten für HV Verbindungen 143 10.9 tzn
30014399 Sechskantschrauben mit großen Schlüsselweiten für HV Verbindungen 1 10.9 tzn
3012338 Zylinderstifte Toleranzfeld h8 Stahl blank
3022338 Zylinderstifte Toleranzfeld m6 Stahl blank
3042338 Zylinderstifte Toleranzfeld m6 A1 blank
3054026 Gewindestifte mit Innensechskant und Kegelkuppe 45H brüniert
3074026 Gewindestifte mit Innensechskant und Kegelkuppe 45H verz. blau
3094026 Gewindestifte mit Innensechskant und Kegelkuppe A2 blank
3104027 Gewindestifte mit Innensechskant und Spitze 45H brüniert
3114027 Gewindestifte mit Innensechskant und Spitze 45H verz. blau
3124027 Gewindestifte mit Innensechskant und Spitze A2 blank
3134028 Gewindestifte mit Innensechskant und Zapfen 45H brüniert
3144028 Gewindestifte mit Innensechskant und Zapfen 45H verz. blau
3154028 Gewindestifte mit Innensechskant und Zapfen A2 blank
3164029 Gewindestifte mit Innensechskant und Ringschneide 45H brüniert
3184029 Gewindestifte mit Innensechskant und Ringschneide 45H verz. blau
3194029 Gewindestifte mit Innensechskant und Ringschneide A2 blank
3204032 Sechskantmuttern 5.2 blank
3214032 Sechskantmuttern 5.2 verz. blau
3224762 Zylinderschrauben mit Innensechskant 8.8 brüniert
3254762 Zylinderschrauben mit Innensechskant 8.8 verz. blau
3274762 Zylinderschrauben mit Innensechskant 10.9 brüniert
3304762 Zylinderschrauben mit Innensechskant 10.9 verz. blau
3324762 Zylinderschrauben mit Innensechskant 12.9 brüniert
3354762 Zylinderschrauben mit Innensechskant 12.9 verz. blau
3364762 Zylinderschrauben mit Innensechskant A2 blank
3397089 Scheiben Form A HV200 blank
3407089 Scheiben Form A HV200 verz. blau
3417089 Scheiben Form A HV200 tzn
3427380-1 Linsenschrauben mit Innensechskant 10.9 brüniert
3437380-1 Linsenschrauben mit Innensechskant 10.9 verz. blau
3447380-1 Linsenschrauben mit Innensechskant A2 blank
3457380-2 Linsen-Flanschkopfschraube mit Innensechskant 10.9 brüniert
3467380-2 Linsen-Flanschkopfschraube mit Innensechskant 10.9 verz. blau
3477380-2 Linsen-Flanschkopfschraube mit Innensechskant A2 blank
3488748 Spiral-Spannstifte schwere Ausführung Stahl brüniert
3498750 Spiral-Spannstifte Regelausführung Stahl brüniert
3508752 Spannstifte (Spannhülsen) schwere Ausführung Stahl brüniert
3538752 Spannstifte (Spannhülsen) schwere Ausführung A2 blank
35410642 Senkschrauben mit Innensechskant 8.8 brüniert
35510642 Senkschrauben mit Innensechskant 8.8 verz. blau
35610642 Senkschrauben mit Innensechskant 10.9 brüniert
35810642 Senkschrauben mit Innensechskant 10.9 verz. blau
35910642 Senkschrauben mit Innensechskant A2 blank
36113337 Spannstifte (Spannhülsen) leichte Ausführung Stahl brüniert
36214579 Zylinderschrauben mit TX A2 blank
36414580 Zylinderschrauben mit TX und niedrigem Kopf A2 blank
36514581 Senkschrauben mit TX 4.8 verz. blau
36614581 Senkschrauben mit TX A2 blank
36714583 Linsenschrauben mit TX 4.8 verz. blau
36814583 Linsenschrauben mit TX A2 blank
36914584 Linsensenkschrauben mit TX A2 blank
3704x4 Zentro SDS Hammerbohrer HM SDS-plus
371Schnorr Sicherungsscheiben S Schnorr Stahl brüniert
372Schnorr Sicherungsscheiben S Schnorr Stahl verz. blau
373Stocksch. Stockschrauben mit aufgewalztem Holzgewinde Stahl verz. blau
04 / 2019 A 10