Download - Vnx.su Figo Brm B517
-
7/21/2019 Vnx.su Figo Brm B517
1/717
-
7/21/2019 Vnx.su Figo Brm B517
2/717
FORD FIGO B517GROUP
Body and Paint 5SECTION TITLE PAGEBody and Paint
Body System - General Information...............................................................................501-00Front End Body Panels..................................................................................................501-02Body Closures................................................................................................................501-03Interior Trim and Ornamentation....................................................................................501-05Rear View Mirrors..........................................................................................................501-09
Seating...........................................................................................................................501-10Glass, Frames and Mechanisms....................................................................................501-11Instrument Panel and Console.......................................................................................501-12Handles, Locks, Latches and Entry Systems................................................................501-14Wipers and Washers......................................................................................................501-16Bumpers.........................................................................................................................501-19Safety Belt System.........................................................................................................501-20ASupplemental Restraint System.....................................................................................501-20BBody Repairs - General Information..............................................................................501-25ABody Repairs - Noise, Vibration and Harshness............................................................501-25BBody Repairs - Plastic Repairs......................................................................................501-25CBody Repairs - Paintless Dent Removal.......................................................................501-25D
Body Repairs - Vehicle Specific Information and Tolerance Checks.............................501-26Front End Sheet Metal Repairs......................................................................................501-27Roof Sheet Metal Repairs..............................................................................................501-28Side Panel Sheet Metal Repairs....................................................................................501-29Rear End Sheet Metal Repairs......................................................................................501-30Paint - General Information............................................................................................501-36
Frame and MountingUni-Body, Subframe and Mounting System...................................................................502-00
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
3/717
SECTION 501-00 Body System - General Information
VEHICLE APPLICATION:2010.25 Figo
PAGECONTENTS
DESCRIPTION AND OPERATION
501-00-2Body....................................................................................................................................501-00-2Front end design features...................................................................................................501-00-4Rear end design features...................................................................................................501-00-4NVH elements....................................................................................................................501-00-5Attached parts....................................................................................................................
501-00-1Body System - General Information501-00-1
.
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
4/717
Body
Front end design features
The newly designed front end structure of thismodel consists mainly of the plastic front endmodule and the sheet steel crash element.
E119865
1
2
DescriptionItem
Plastic front end module1
Sheet steel crash element (crossmember)2
Plastic front end module
The plastic front end module acts among otherthings as a mounting for various components likethe radiator, radiator fan and hood lock.
This design allows repairs to be performed easilyand economically, as the complete front endmodule can be detached together with theflanged-on assemblies.
In areas subjected to more severe loads the plastic
front end module is additionally reinforced withhigh-resistance foam.
G1268358en2010.25 Figo 2/2010
501-00-2Body System - General Information501-00-2
DESCRIPTION AND OPERATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
5/717
-
7/21/2019 Vnx.su Figo Brm B517
6/717
Two additional designated yield points in the frontpart of the longitudinal members absorb furthercrash energy.
2-part frame construction in the deformation area
- increased ease of repair.Laser butt weld seam directly behind the crasharea - optional sectional replacement.
In the front area of the longitudinal members(deformation area) there are no inwardreinforcements - increased ease of repair.
Front bumper
The plastic bumper is positioned relative to thefenders with two plastic lugs on each side of thevehicle and bolted in place.
The fog lamps are integrated in the bumper, andthe ventilation grille and the front apron are clippedonto the bumper.
Rear end design features
E31054
2
1 1
2
DescriptionItem
Studs1
Designated yield points2
Rear longitudinal member
In more serious rear impacts the ends of the rearlongitudinal members are also deformed in addition
to the crossmember. Designated yield points inthis area allow the residual energy to be dissipatedin a controlled manner and prevent follow-on
damage on the body structure. Sectionalreplacements are possible in the area of thedesignated yield points.
NVH elements
As already featured on some models of Ford, thismodel also features three elements on each sideof the vehicle to reduce the transmission ofairborne noise to the body.
If any body repairs are carried out in these areasthen the NVH elements must also be reinstalledor renewed.
G1268358en2010.25 Figo 2/2010
501-00-4Body System - General Information501-00-4
DESCRIPTION AND OPERATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
7/717
-
7/21/2019 Vnx.su Figo Brm B517
8/717
E119909
1
2
3
4
5
DescriptionItem
Hinge half, door side1
Hinge half, body side2
DescriptionItem
Mechanical locking mechanism with thedoor closed
3
Door hinge mounting plate4
Front door reinforcement5
G1268358en2010.25 Figo 2/2010
501-00-6Body System - General Information501-00-6
DESCRIPTION AND OPERATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
9/717
Hood
E119910
11
2 3
Due to the reinforcement of the panel areas (greyareas), there are limited options for performing dentremoval techniques without damaging thepaintwork.
Surrounding seals and sealing bead in the clinchedflange area.
Windshield washer nozzles (1) integrated into thehood.
Mechanical hood prop (2) on the right-hand sideof the vehicle.
Hinge on the body side and hood side (3), eachsecured with 2 bolts. Adjustment options areprovided via oversized bores,
The hood lock can be released via a cable fromthe passenger compartment.
Some variants of diesel vehicles are equipped witha hood insulation.
G1268358en2010.25 Figo 2/2010
501-00-7Body System - General Information501-00-7
DESCRIPTION AND OPERATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
10/717
Forced ventilation
E31058
1
2
DescriptionItem
Plastic mounting element1
Moving plates2
In the rear part of this model there are threeclipped-in elements for forced ventilation of thepassenger compartment and luggagecompartment.
Two elements in the lower part of theleft/right-hand side panel.
One central element in the area of the rearpanel.
Fascia/crash padding
The fascia/crash padding is secured to a cross-carbeam bolted between the two A-pillars.Components like the passenger airbag, steeringcolumn etc. are directly attached to this component.
G1268358en2010.25 Figo 2/2010
501-00-8Body System - General Information501-00-8
DESCRIPTION AND OPERATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
11/717
SECTION 501-02 Front End Body Panels
VEHICLE APPLICATION:2010.25 Figo
PAGECONTENTS
SPECIFICATIONS
501-02-2Specifications......................................................................................................................
REMOVAL AND INSTALLATION
501-02-3(44 252 0)Fender............................................................................................................501-02-5Hood...................................................................................................................................501-02-7Radiator Grille Opening Panel............................................................................................
501-02-1Front End Body Panels501-02-1
.
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
12/717
Torque Specifications
lb-inlb-ftNmItem
-1723Hood hinge to hood retaining nuts
-1723Hood hinge retaining bolts
-1520Windshield wiper arm retaining nuts
44-5Fender splash shield retaining screws
62-7Fender retaining bolts
27-3Washer reservoir to radiator grille opening panelretaining bolt
-1825Front bumper retaining bolts
-1825Radiator grille opening panel retaining bolts
--9Hood release cable fitment to body
G1225357en2010.25 Figo 2/2010
501-02-2Front End Body Panels501-02-2
SPECIFICATIONS
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
13/717
Fender(44 252 0)
Removal
1. NOTE: For right side fender removal only.
Remove the hood.
For additional information, refer to:Hood(501-02 Front End Body Panels, Removaland Installation).
E120988
2. Remove the front wheels.
For additional information, refer to:Wheeland Tire (204-04 Wheels and Tires, Removal
and Installation).3. Remove the fender splash shield.
E119642
x2
E119641
x3
E119640
4. Remove the fender side cover moulding.
E119643
G1225361en2010.25 Figo 2/2010
501-02-3Front End Body Panels501-02-3
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
14/717
5. Remove the fender retaining upper bolt.
E119644
6. Disconnect the turn signal electricalconnector.
E119645
7. Remove the headlamp assembly.
8. Remove the fender inner retaining bolt.
E119646
9. Remove the front bumper cover.
For additional information, refer to:FrontBumper Cover(501-19 Bumpers, Removaland Installation).
10. Remove the fender lower retaining bolts.
E119647
x2
11. Remove the fender front retaining bolts.
E0029911
7 Nm
12. Remove the fender.
E119648
x3
Installation
1. To install, reverse the removal procedure.
G1225361en2010.25 Figo 2/2010
501-02-4Front End Body Panels501-02-4
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
15/717
Hood
Removal
1. Open the hood.
2. Remove the battery negative cable.
For additional information, refer to:BatteryDisconnect and Connect(414-01 Battery,Mounting and Cables, General Procedures).
3. Remove the wiper washer fluid hose.
E119632
4. NOTE: Mark the position of the hood hingein relation to the hood on both sides to aid
installation.
Remove the hood.
1. Remove the nuts on both sides.
E119633
x4
5. Remove the wiper arm covers on both sides.
E119634
6. Remove the wiper arm nuts on both sides.
E119635
7. Remove the wiper arms on both sides.
E119636
8. Remove the cowl panel grill.
G1225359en2010.25 Figo 2/2010
501-02-5Front End Body Panels501-02-5
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
16/717
1. Remove the clips on both sides.
E119637
x2
9. Remove the hood hinges on both sides.
1. Remove the bolts on both sides.
E119638
x2
E119639
x2
Installation
1. NOTE: Align the hood and hood hinge boltsto the previously marked positions.
To install, reverse the removal procedure.
G1225359en2010.25 Figo 2/2010
501-02-6Front End Body Panels501-02-6
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
17/717
Radiator Grille Opening Panel
Removal
1. Remove the front bumper cover.
For additional information, refer to:FrontBumper Cover(501-19 Bumpers, Removaland Installation).
2. Remove the headlamp assembly.
For additional information, refer to:Headlamp Assembly (417-01 ExteriorLighting, Removal and Installation).
3. Detach the windshield washer reservoir fromthe radiator grille opening panel.
TIE0031567
3 Nm
4. Release the hood latch release cable.
TIE0031828
5. NOTE: Vehicles with 1.4L/1.6L Duratecengines only.
Detach the air intake hose from the radiatorgrille opening panel.
+
E122764
6. Detach the coolant tank and keep it aside.
E119742
7. Detach the power steering pump (PSP)reservoir from the radiator grille openingpanel.
TIE0031563
G1225363en2010.25 Figo 2/2010
501-02-7Front End Body Panels501-02-7
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
18/717
8. Remove the radiator grill opening panelretaining bolts attaching it to the frontreinforcement assembly.
E119659
x4
9. Remove the radiator grill opening panelretaining bolts.
TIE0029915
25 Nm
10. Remove the radiator grille opening panel.
E119660
Installation
1.CAUTION: The radiator grille opening
panel must be installed centrally betweenthe fenders, the hood and headlamps mustengage freely to prevent damage.
To install, reverse the removal procedure.
G1225363en2010.25 Figo 2/2010
501-02-8Front End Body Panels501-02-8
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
19/717
SECTION 501-03 Body Closures
VEHICLE APPLICATION:2010.25 Figo
PAGECONTENTS
SPECIFICATIONS
501-03-2Specifications......................................................................................................................
501-03-1Body Closures501-03-1
.
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
20/717
Torque Specifications
lb-inlb-ftNmItem
53-6Door check strap to door retaining bolts
-1723Door check strap to door pillar retaining bolts
-1014Door striker plate retaining bolts
-1825Door hinge retaining bolts
--2Front and rear door bezel screw tightening
--2Front and rear trim board lower screw tightening
--2Outer handle screw tightening
-811Liftgate striker plate retaining bolts
-1318Liftgate hinge retaining nuts
-811Liftgate hinge retaining bolts-1723Hood hinge retaining bolts
-1723Check arm screw tightening (Front & Rear)
-1723Liftgate damper pivot
-1723Tailgate latch screw tightening
--8Latch assy to front and rear door
--6Mechanical fuel door lever fitment
G1268499en2010.25 Figo 2/2010
501-03-2Body Closures501-03-2
SPECIFICATIONS
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
21/717
SECTION 501-05 Interior Trim and Ornamentation
VEHICLE APPLICATION:2010.25 Figo
PAGECONTENTS
SPECIFICATIONS
501-05-2Specifications......................................................................................................................
REMOVAL AND INSTALLATION
501-05-3(43 705 0)Front Door Trim Panel....................................................................................501-05-6Front Scuff Plate Trim Panel...............................................................................................501-05-8Loadspace Trim Panel........................................................................................................
501-05-10(43 706 0)Rear Door Trim Panel.....................................................................................
501-05-12(43 612 0)Headliner........................................................................................................501-05-16(43 617 0)B-Pillar Trim Panel..........................................................................................501-05-17(43 618 0)C-Pillar Trim Panel..........................................................................................501-05-19Rear Scuff Plate Trim Panel...............................................................................................
501-05-1Interior Trim and Ornamentation501-05-1
.
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
22/717
Torque Specifications
lb-inlb-ftNmDescription
-3040Safety belt lower anchor retaining bolts
-3040Safety belt upper anchor retaining bolts
G1268594en2010.25 Figo 2/2010
501-05-2Interior Trim and Ornamentation501-05-2
SPECIFICATIONS
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
23/717
Front Door Trim Panel(43 705 0)
Removal
All vehicles
1. Detach the rear door latch remote controlhandle bezel.
1. Remove the screw cover.
2. Remove the retaining screw.
21
VUE0026732
Vehicles with manual windows
2. Remove the window regulator handle.
E119663
3. Remove the door pull handle screw cover.
E119669
4. Remove the screw.
E119670
Vehicles with power windows
5. Remove the door pull handle screw cover.
E119661
6. Remove the screw.
E119662
G1225365en2010.25 Figo 2/2010
501-05-3Interior Trim and Ornamentation501-05-3
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
24/717
-
7/21/2019 Vnx.su Figo Brm B517
25/717
remote control handle and remove the frontdoor trim panel.
E65845
14. Release the locking tangs and remove the
front door latch remote control handle fromthe front door trim panel.
VUE0029962
Vehicles with power windows
15. Disconnect the window control switchelectrical connector.
E128035
Installation
1. To install, reverse the removal procedure.
G1225365en2010.25 Figo 2/2010
501-05-5Interior Trim and Ornamentation501-05-5
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
26/717
Front Scuff Plate Trim Panel
Removal
1. Remove the front door opening weatherstrips.
E119720
2. Remove the rear door opening weatherstrips.
E119723
3. Remove the B-pillar trim panels.
Refer to:B-Pillar Trim Panel(501-05 InteriorTrim and Ornamentation, Removal andInstallation).
4. NOTE:Seats and doors removed view shownfor clarity.
Pull the scuff plate towards centre of vehicle
and remove it.
G1234489en2010.25 Figo 2/2010
501-05-6Interior Trim and Ornamentation501-05-6
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
27/717
E120353
Installation
1. To install, reverse the removal procedure.
G1234489en2010.25 Figo 2/2010
501-05-7Interior Trim and Ornamentation501-05-7
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
28/717
Loadspace Trim Panel
Removal
1. NOTE:Back door removed shown for clarity.
NOTE:Water leak test to be done after fitmentof liftgate weatherstrip and to be renewed if leakis observed.
Detach the liftgate opening weatherstrip.
E119725
2. Pull the back door trim lower.
E120414
G1234487en2010.25 Figo 2/2010
501-05-8Interior Trim and Ornamentation501-05-8
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
29/717
3. Remove the clips and detach the load spacetrim panel.
E120415
x4
Installation
1. To install reverse the removal procedure.
G1234487en2010.25 Figo 2/2010
501-05-9Interior Trim and Ornamentation501-05-9
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
30/717
Rear Door Trim Panel(43 706 0)
Removal
All vehicles
1. Detach the rear door latch remote controlhandle bezel.
1. Remove the screw cover.
2. Remove the retaining screw.
21
VUE0026732
2. Remove the screw cover.
E119713
3. Remove the retaining screw.
E119714
Vehicles with manual windows
4. Remove the window regulator handle. Use a suitable piece of hooked wire or
similar.
TIT4301006
All vehicles
5. Remove the door trim panel retaining screws.
E119716
x2
6. Remove the rear door inner trim quarterpanel.
E119717
7. Detach the door trim panel
G1225367en2010.25 Figo 2/2010
501-05-10Interior Trim and Ornamentation501-05-10
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
31/717
Pull the door trim panel out at the bottom todetach the retaining clips.
Lift up the door trim panel to release fromthe door.
E128036
8. Disconnect the door latch remote controlcable from the door handle and remove thedoor trim panel.
E65845
9. Release the locking tangs and remove thefront door latch remote control handle fromthe front door trim panel.
VUE0029962
Installation
1. To install, reverse the removal procedure.
G1225367en2010.25 Figo 2/2010
501-05-11Interior Trim and Ornamentation501-05-11
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
32/717
Headliner(43 612 0)
General Equipment
6 mm flat-bladed screwdriver
Removal
All vehicles
1. Detach the front door opening weatherstrips.
E119720
2. Remove the A-pillar trim panels.
VUE0027052
3. NOTE: When disconnecting the rear washertube, allow the washer fluid to drain into asuitable container.
Detach the rear washer tube from the A-pillar.
E119721
All vehicles
4. Detach the interior lamp.
E119719
5. Disconnect the electrical connectors andremove the interior lamp.
VUE0003591
G1225369en2010.25 Figo 2/2010
501-05-12Interior Trim and Ornamentation501-05-12
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
33/717
All vehicles
6. Remove the sun visors.
TIE0000246
7. Remove the sun visor retaining clips.
VUE0022706
All vehicles
8. Remove the passenger assist handles.
1. Pull the handle downwards.
2. Open the cover.
3. Remove the screws.
E127993
x2
1
2
3
All vehicles
9. Detach the rear door opening weatherstrips.
E119723
10. Detach the B-pillar upper trim panels andposition them to one side.
1. Remove the screw cover.
2. Remove the retaining screw.
Unclip the upper trim panel.
E124501
3
2
3
1
11. NOTE: Water leak test to be done afterfitment of liftgate weatherstrip and to berenewed if leak is observed.
Detach the liftgate opening weatherstrip.
E119725
G1225369en2010.25 Figo 2/2010
501-05-13Interior Trim and Ornamentation501-05-13
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
34/717
12. Remove the C-pillar trim panel retainingclips.
E119726
13. Remove the rear parcel shelf.
14. Remove the rear parcel shelf supports.
Disconnect the load space lamp electricalconnector to remove the right-hand rearparcel shelf support.
VUE0027177
15. Remove the C-pillar screw cover.
E119727
16. Remove the C-pillar retaining screw.
E119728
17. Unclip and detach the C-pillar trim panels,then position them to one side.
E119729
All vehicles
18. Remove the interior lamp bezel.
MPE0000922
G1225369en2010.25 Figo 2/2010
501-05-14Interior Trim and Ornamentation501-05-14
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
35/717
All vehicles
19. Remove the headliner rear retaining clips.
VUE0027172
All vehicles20. Disconnect the rear washer tube from the
headliner.
E119724
21. Remove the headliner through the liftgateopening.
E119722
Installation
1. NOTE: Fix foams to the roof header properly.To install, reverse the removal procedure.
G1225369en2010.25 Figo 2/2010
501-05-15Interior Trim and Ornamentation501-05-15
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
36/717
B-Pillar Trim Panel(43 617 0)
1. Detach the door opening weatherstrips fromthe B-pillar.
TIE0027124
2. NOTE: Hold the safety belt webbing whendetaching the safety belt lower anchor fromthe floor panel.
Detach the safety belt lower anchor from thefloor panel.
Remove the retaining bolt and spacer fromthe anchor plate.
TIE0027137
40 Nm
3. Remove the B-pillar upper trim panel.
1. Remove the screw cover.
2. Remove the retaining screw.
3. Detach the retaining clips.
Feed the safety belt webbing through theB-pillar upper trim panel.
E124501
3
2
3
1
4. Remove the B-pillar lower trim panel.
Detach the retaining clips.
TIE0027136
Installation
1. To install, reverse the removal procedure.
G1268287en2010.25 Figo 2/2010
501-05-16Interior Trim and Ornamentation501-05-16
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
37/717
C-Pillar Trim Panel(43 618 0)
Removal
1. Remove the parcel shelf ( Back doorremoved shown for clarity ).
E120051
2. NOTE: Water leak test to be done afterfitment of liftgate weatherstrip and to berenewed if leak is observed.
Detach the liftgate opening weatherstrip.
E119725
3. Remove the parcel shelf supports.
VUE0027177
4. Remove the C-pillar trim panel retaining clip.
E119726
5. Detach the rear door opening weatherstrips.
E119723
6. Fold the rear seat cushion.
7. NOTE: Hold the safety belt webbing whendetaching the lower anchor from the floorpanel.
Detach the rear safety belt lower anchor fromthe floor panel.
TIE0027143
40 Nm
G1225371en2010.25 Figo 2/2010
501-05-17Interior Trim and Ornamentation501-05-17
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
38/717
8. Remove the C-pillar screw cover.
E119727
9. Remove the C-pillar retaining screw.
E119728
10. Unclip and detach the C-pillar trim panel.
E119729
Installation
1. To install, reverse the removal procedure.
G1225371en2010.25 Figo 2/2010
501-05-18Interior Trim and Ornamentation501-05-18
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
39/717
Rear Scuff Plate Trim Panel
Removal
1. Remove the rear door opening weatherstrips.
E119723
2. Remove the C-pillar trim panel.
For additional information, refer to:C-PillarTrim Panel(501-05 Interior Trim andOrnamentation, Removal and Installation).
3. Detach the front scuff plate trim from the rearscuff plate trim panel.
E64136
4. Tilt the rear seat cushion forward.
5. Remove the rear scuff plate trim panelretaining clip.
E63916
6. Tilt the rear seat backrest forward.
7. Remove the rear scuff plate trim panel.
G1234479en2010.25 Figo 2/2010
501-05-19Interior Trim and Ornamentation501-05-19
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
40/717
E120352
Installation
1. To install, reverse the removal procedure.
G1234479en2010.25 Figo 2/2010
501-05-20Interior Trim and Ornamentation501-05-20
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
41/717
SECTION 501-09 Rear View Mirrors
VEHICLE APPLICATION:2010.25 Figo
PAGECONTENTS
SPECIFICATIONS
501-09-2Specifications......................................................................................................................
DESCRIPTION AND OPERATION
501-09-3Rear View Mirrors...............................................................................................................
DIAGNOSIS AND TESTING
501-09-4Rear View Mirrors...............................................................................................................501-09-4Inspection and Verification..................................................................................................
REMOVAL AND INSTALLATION
501-09-13(43 364 0)Exterior Mirror.................................................................................................
501-09-1Rear View Mirrors501-09-1
.
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
42/717
Torque Specifications
lb-inlb-ftNmItem
-811External mirror retaining bolt
G1225375en2010.25 Figo 2/2010
501-09-2Rear View Mirrors501-09-2
SPECIFICATIONS
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
43/717
Rear View Mirrors
There are two levels of exterior rear view mirroravailable depending upon market options. Allmodels have a manual day/night interior rear viewmirror. Low series models have manually operatedremote exterior rear view mirrors. High seriesmodels have electrically operated power mirrorscontrolled by a multi-function switch mounted onthe drivers door panel.
Replacement mirror glasses are available for bothpower and manually operated exterior rear viewmirrors.
The interior rear view mirror is attached to aspecially treated area of the front windshield by anadhesive patch. The adhesive patch is availableas a service part.
G1230290en2010.25 Figo 2/2010
501-09-3Rear View Mirrors501-09-3
DESCRIPTION AND OPERATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
44/717
Rear View Mirrors
schematic and connector information.
Inspection and Verification
1. Verify the customer concern.
2. Visually inspect for obvious signs of mechanicaland electrical damage.
Visual Inspection Chart
ElectricalMechanical
Fuse(s)
Electricalconnector(s)
Switch
Exterior mirror(s)
3. If an obvious cause for an observed or reportedconcern is found, correct the cause beforeproceeding to the next step.
4. If the cause is not visually evident, verify thesymptom and refer to the Symptom Chart.
ActionPossible SourcesSymptom
CARRY OUT the ExteriorMirror Control SwitchComponent Test. REFER to thecomponent test at the end ofthe section.
Exterior mirror control switch The exterior mirrors are inoper-ative
GO to Pinpoint Test A. Circuit(s).
CARRY OUT the ExteriorMirror Control SwitchComponent Test. REFER to the
component test at the end ofthe section.
Exterior mirror control switch. A single exterior mirror is inop-erative
GO toPinpoint Test B. Exterior mirror motor(s). Circuit(s).
CARRY OUT the ExteriorMirror Control SwitchComponent Test. REFER to thecomponent test at the end ofthe section.
Exterior mirror control switch. A single exterior mirror doesnot function with switch logic
GO toPinpoint Test C. Exterior mirror motor(s).
Circuit(s).
PINPOINT TEST A : THE EXTERIOR MIRRORS ARE INOPERATIVE
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
NOTE:Use a digital multimeter for all electrical measurements.
A1: CHECK THE FUSE F6 (7.5A) (CJB)
1 Ignition switch in position 0.
G1225377en2010.25 Figo 2/2010
501-09-4Rear View Mirrors501-09-4
DIAGNOSIS AND TESTING
Refer to Wiring Diagrams Section501-09, for
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
45/717
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
2 Disconnect the Fuse F6 (7.5A) (CJB).
Is the fuse ok?
YesGO to A2.
NoINSTALL a new fuse. TEST the system fornormal operation. If the fuse fails again repaircircuit SBP06 (BN/RD) using the wiringdiagram. INSTALL a new CJB if necessary.
A2: CHECK THE FUSE F6 (7.5A) (CJB) FOR POWER
1 Connect the Fuse F6 (7.5A) (CJB).
2 Measure the voltage between Fuse F6 (7.5A)(CJB) pin 2, circuit SBP06 (BN/RD) componentside and ground.
Is the voltage greater than 10 volts?
Yes
E67858
GO to A3.
NoRepair circuit SBP06 (BN/RD) using the wiringdiagram. INSTALL a new CJB if necessary.TEST the system for normal operation.
A3: CHECK THE VOLTAGE TO THE EXTERIOR MIRROR CONTROL SWITCH
1 Disconnect Exterior Mirror Control SwitchCAPM20.
2 Measure the voltage between the exterior mirrorcontrol switch CAPM20 pin 6, circuit SBP06(BN/RD), harness side and ground.
Is the voltage greater than 10 volts?
Yes
TIE0014407
GO to A4.
No
REPAIR circuit SBP06 (BN/RD). TEST thesystem for normal operation.
G1225377en2010.25 Figo 2/2010
501-09-5Rear View Mirrors501-09-5
DIAGNOSIS AND TESTING
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
46/717
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
A4: CHECK THE EXTERIOR MIRROR CONTROL SWITCH GROUND CIRCUIT FOR CONTINUITY
1 Measure the resistance between the exterior
mirror control switch CAPM20 pin 4, circuitGD356 (BK/VT), harness side and ground.
Is the resistance less than 5 ohms?
Yes
TIE0014408
CARRY OUT the Exterior Mirror ControlSwitch Component Test.
No
REPAIR circuit GD356 (BK/VT), groundconnection G10 and splice SAD356 using thewiring diagram. TEST the system for normal
operation.
PINPOINT TEST B : A SINGLE EXTERIOR MIRROR IS INOPERATIVE
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
NOTE:Use a digital multimeter for all electrical measurements.
B1: CHECK THE EXTERIOR MIRROR MOTOR CIRCUIT FOR CONTINUITY
1 Disconnect Exterior Mirror Control SwitchCAPM20.
2 Measure the resistance between the exteriormirror control switch CAPM20 pin 3, circuitCPM18 (GN/BN), harness side and the exteriormirror control switch CAPM20 pin 2, circuitCPM21 (YE/VT), harness side.
E96095
3 Measure the resistance between the exteriormirror control switch CAPM20 pin 3, circuitCPM18 (GN/BN), harness side and the exteriormirror control switch CAPM20 pin 1, circuitCPM17 (BU/GN), harness side.
Is the resistance less than 50 ohms?
Yes
E122760
CARRY OUT the Exterior Mirror ControlSwitch Component Test.
NoGO to B2.
G1225377en2010.25 Figo 2/2010
501-09-6Rear View Mirrors501-09-6
DIAGNOSIS AND TESTING
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
47/717
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
B2: CHECK FOR CONTINUITY BETWEEN THE EXTERIOR MIRROR CONTROL SWITCH AND THEEXTERIOR MIRROR
1 Disconnect Driver Side Exterior Mirror C54 orPassenger Side Exterior Mirror C55.
2 Measure the resistance between the: Exterior mirror control switch CAPM20 pin 3,
circuit CPM18 (GN/BN), harness side and thedriver side exterior mirror C54 pin 1, circuitCPM18 (GN/BN), harness side.
Exterior mirror control switch CAPM20 pin 3,circuit CPM18 (GN/BN), harness side and thepassenger side exterior mirror C55 pin 1, circuitCPM18 (GN/BN), harness side.
E104565 Is the resistance less than 5 ohms?
YesINSTALL a new exterior mirror.
REFER to:Exterior Mirror(501-09 Rear ViewMirrors, Removal and Installation).
TEST the system for normal operation.
NoREPAIR circuit CPM18 (GN/BN). TEST thesystem for normal operation.
PINPOINT TEST C : A SINGLE EXTERIOR MIRROR DOES NOT FUNCTION WITH SWITCH LOGIC
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
NOTE:Use a digital multimeter for all electrical measurements.
C1: CHECK THE EXTERIOR MIRROR FUNCTIONS WITH SWITCH LOGIC
1 Ignition switch in position 0.
2 Operate the exterior mirror control switch.
Does the exterior mirror function with switch
logic?
YesCARRY OUT the Exterior Mirror ControlSwitch Component Test.
NoDriver side exterior mirror up/down functioninoperativeGO to C2.Driver side exterior mirror left/right function isinoperativeGO to C4.Passenger side exterior mirror up/down func-tion is inoperativeGO to C6.Passenger side exterior mirror left/right func-tion is inoperativeGO to C8.
G1225377en2010.25 Figo 2/2010
501-09-7Rear View Mirrors501-09-7
DIAGNOSIS AND TESTING
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
48/717
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
C2: CHECK THE DRIVER SIDE EXTERIOR MIRROR UP/DOWN CIRCUIT
1 Ignition switch in position 0.
2 Disconnect Exterior Mirror Control SwitchCAPM20.
3 Measure the resistance between the exteriormirror control switch CAPM20 pin 3, circuitCPM18 (GN/BN), harness side and the exteriormirror control switch CAPM20 pin 2, circuitCPM21 (YE/VT), harness side.
Is the resistance less than 50 ohms?
Yes
E96095
CARRY OUT the Exterior Mirror ControlSwitch Component Test. REFER to thecomponent test at the end of the section.
NoGO to C3.
C3: CHECK FOR CONTINUITY BETWEEN THE EXTERIOR MIRROR CONTROL SWITCH AND THEDRIVER SIDE EXTERIOR MIRROR
1 Disconnect Driver Side Exterior Mirror C54.
2 Measure the resistance between the exteriormirror control switch CAPM20 pin 2, circuit
CPM21 (YE/VT), harness side and the driverside exterior mirror C54 pin 2, circuit CPM21(YE/VT), harness side.
Is the resistance less than 5 ohms?
Yes
E104570
INSTALL a new driver side exterior mirror.
REFER to:Exterior Mirror(501-09 Rear ViewMirrors, Removal and Installation).
TEST the system for normal operation.
NoREPAIR circuit CPM21 (YE/VT). TEST thesystem for normal operation.
C4: CHECK THE DRIVER SIDE EXTERIOR MIRROR LEFT/RIGHT CIRCUIT
1 Ignition switch in position 0.
2 Disconnect Exterior Mirror Control SwitchCAPM20.
G1225377en2010.25 Figo 2/2010
501-09-8Rear View Mirrors501-09-8
DIAGNOSIS AND TESTING
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
49/717
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
3 Measure the resistance between the exteriormirror control switch CAPM20 pin 3, circuitCPM18 (GN/BN), harness side and the exterior
mirror control switch pin 5, circuit CPM20(BN/WH), harness side.
Is the resistance less than 50 ohms?
Yes
E96096
CARRY OUT the Exterior Mirror ControlSwitch Component Test.
NoGO to C5.
C5: CHECK FOR CONTINUITY BETWEEN THE EXTERIOR MIRROR CONTROL SWITCH AND THE
DRIVER SIDE EXTERIOR MIRROR
1 Disconnect Driver Side Exterior Mirror C54.
2 Measure the resistance between the exteriormirror control switch CAPM20 pin 5, circuitCPM20 (BN/WH), harness side and the driverside exterior mirror C54 pin 3, circuit CPM20(BN/WH), harness side.
Is the resistance less than 5 ohms?
Yes
E104566
INSTALL a new driver side exterior mirror.REFER to:Exterior Mirror(501-09 Rear View
Mirrors, Removal and Installation).TEST the system for normal operation.
No
REPAIR circuit CPM20 (BN/WH). TEST thesystem for normal operation.
C6: CHECK THE PASSENGER SIDE EXTERIOR MIRROR UP/DOWN CIRCUIT
1 Ignition switch in position 0.
2 Disconnect Exterior Mirror Control SwitchCAPM20.
3 Measure the resistance between the exteriormirror control switch CAPM20 pin 3, circuitCPM18 (GN/BN), harness side and the exteriormirror control switch CAPM20 pin 1, circuitCPM17 (BU/GN), harness side.
Is the resistance less than 50 ohms?
Yes
E96097
CARRY OUT the Exterior Mirror Control
Switch Component Test.
NoGO to C7.
G1225377en2010.25 Figo 2/2010
501-09-9Rear View Mirrors501-09-9
DIAGNOSIS AND TESTING
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
50/717
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
C7: CHECK FOR CONTINUITY BETWEEN THE EXTERIOR MIRROR CONTROL SWITCH AND THEPASSENGER SIDE EXTERIOR MIRROR
1 Disconnect Passenger Side Exterior Mirror C55.2 Measure the resistance between the exterior
mirror control switch CAPM20 pin 1, circuitCPM17 (BU/GN), harness side and thepassenger side exterior mirror C55 pin 2, circuitCPM17 (BU/GN), harness side.
Is the resistance less than 5 ohms?
Yes
E104567
INSTALL a new passenger side exteriormirror.
REFER to:Exterior Mirror(501-09 Rear ViewMirrors, Removal and Installation).
TEST the system for normal operation.
NoREPAIR circuit CPM17 (BU/GN). TEST thesystem for normal operation.
C8: CHECK THE PASSENGER SIDE EXTERIOR MIRROR LEFT/RIGHT CIRCUIT
1 Ignition switch in position 0.
2 Disconnect Exterior Mirror Control Switch
CAPM20.
3 Measure the resistance between the exteriormirror control switch CAPM20 pin 3, circuitCPM18 (GN/BN), harness side and the exteriormirror control switch CAPM20 pin 7, circuitCPM16 (BN/BU), harness side.
Is the resistance less than 50 ohms?
Yes
E104568
CARRY OUT the Exterior Mirror ControlSwitch Component Test.
NoGO to C9.
C9: CHECK FOR CONTINUITY BETWEEN THE EXTERIOR MIRROR CONTROL SWITCH AND THEPASSENGER SIDE EXTERIOR MIRROR
1 Disconnect Passenger Side Exterior Mirror C55.
G1225377en2010.25 Figo 2/2010
501-09-10Rear View Mirrors501-09-10
DIAGNOSIS AND TESTING
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
51/717
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
2 Measure the resistance between the exteriormirror control switch CAPM20 pin 7, circuitCPM16 (BN/BU), harness side, and the
passenger side exterior mirror C55 pin 3, circuitCPM16 (BN/BU), harness side.
Is the resistance less than 5 ohms?
Yes
E104569
INSTALL a new passenger side exteriormirror.
REFER to:Exterior Mirror(501-09 Rear ViewMirrors, Removal and Installation).
TEST the system for normal operation.
NoREPAIR circuit CPM16 (BN/BU). TEST thesystem for normal operation.
Power mirror adjust switch component testing procedure
A good switch willindicate
Move switch to thesepositions
Connect selfpoweredtest light or ohmmeter
to terminals
Circuit to test
Open circuitRest6 and 3Power mirror, left side
Open circuitUp6 and 3Power mirror, left side
Closed circuitDown6 and 3Power mirror, left sideOpen circuitRest6 and 1Up/down
Closed circuitUp6 and 1Up/down
Open circuitDown6 and 1Up/down
Open circuitRest6 and 3Power mirror, right side
Open circuitUp6 and 3Power mirror, right side
Closed circuitDown6 and 3Power mirror, right side
Open circuitRest6 and 2Up/down
Closed circuitUp6 and 2Up/down
Open circuitDown6 and 2Up/down
Open circuitRest6 and 3Power mirror, left side
Closed circuitLeft6 and 3Power mirror, left side
Open circuitRight6 and 3Power mirror, left side
Open circuitRest6 and 7Left/right
Open circuitLeft6 and 7Left/right
Closed circuitRight6 and 7Left/right
Open circuitRest6 and 5Power mirror, right side
Open circuitLeft6 and 5Power mirror, right side
G1225377en2010.25 Figo 2/2010
501-09-11Rear View Mirrors501-09-11
DIAGNOSIS AND TESTING
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
52/717
A good switch willindicate
Move switch to thesepositions
Connect selfpoweredtest light or ohmmeter
to terminals
Circuit to test
Closed circuitRight6 and 5Power mirror, right side
Open circuitRest6 and 3Left/right
Closed circuitLeft6 and 3Left/right
Open circuitRight6 and 3Left/right
Open circuitRest4 and 3Up/down
Closed circuitUp4 and 3Up/down
Open circuitDown4 and 3Up/down
Open circuitRest4 and 3Left/right
Open circuitLeft4 and 3Left/right
Closed circuitRight4 and 3Left/right
E124614
246
1357
G1225377en2010.25 Figo 2/2010
501-09-12Rear View Mirrors501-09-12
DIAGNOSIS AND TESTING
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
53/717
Exterior Mirror(43 364 0)
Removal
Vehicles with manual mirrors
1. Remove the exterior mirror adjustment levercover.
E124236
2. Remove the exterior mirror trim panel.
E124237
Vehicles with power mirrors
3. Detach the exterior mirror trim panel.
E119665
4. Disconnect the exterior mirror control switchelectrical connector.
VUE0026737
5. Disconnect the exterior mirror electricalconnector.
E124238
All vehicles
6. Remove the exterior mirror (power mirrorshown).
1. Remove the exterior mirror retaining screw.
2. Remove the exterior mirror retaining bolt.
E124239
G1234695en2010.25 Figo 2/2010
501-09-13Rear View Mirrors501-09-13
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
54/717
Installation
1. To install, reverse the removal procedure.
G1234695en2010.25 Figo 2/2010
501-09-14Rear View Mirrors501-09-14
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
55/717
SECTION 501-10 Seating
VEHICLE APPLICATION:2010.25 Figo
PAGECONTENTS
SPECIFICATIONS
501-10-2Specifications......................................................................................................................
DESCRIPTION AND OPERATION
501-10-3Seats...................................................................................................................................
REMOVAL AND INSTALLATION
501-10-4Front Seat...........................................................................................................................501-10-5(40 108 0)Front Seat Backrest Cover.............................................................................501-10-8Rear Seat Backrest Cover..................................................................................................
501-10-10(40 534 0)Rear Seat Backrest Latch...............................................................................
501-10-1Seating501-10-1
.
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
56/717
Torque Specifications
lb-inlb-ftNmItem
--35Front seat retaining bolts
--47Front seat belt buckle
-1723Front seat cushion retaining bolts
-3548Front seat backrest retaining bolts
-2027Rear seat backrest latch retaining bolts
-1825Rear seat cushion retaining bolts
-1825Rear seat backrest retaining bolts
-4155Rear center safety belt lower anchor and buckleassembly retaining bolt
G1225381en2010.25 Figo 2/2010
501-10-2Seating501-10-2
SPECIFICATIONS
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
57/717
Seats
Front seats have cut and sew covers over foampadding supported by sprung wire on a steel frame.The cushion and backrest are contoured for lateralsupport with tie downs in the seat back to improverear seat knee clearance. Both front seats can befully reclined and are fitted with two way adjustablehead restraints with foam pads. A flow-through gapbetween the head restraint and the front seatbackrest has been incorporated to allow cool airto reach rear seat occupants. Seat tracks allowforwards and rearwards travel. All front seatsincorporate an outer trim panel, inner trim panelsare fitted depending on vehicle specifications.
The rear seats are contoured with foam padding
supported on a sprung wire frame. The rear seatbackrest has two integral head restraints.
G109234en2010.25 Figo 2/2010
501-10-3Seating501-10-3
DESCRIPTION AND OPERATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
58/717
-
7/21/2019 Vnx.su Figo Brm B517
59/717
Front Seat Backrest Cover(40 108 0)
General Equipment
Hog ring pliers
Removal
1. Remove the front seat.
For additional information, refer to:FrontSeat(501-10 Seating, Removal andInstallation).
2. Remove the head restraint.
1. Press in the head restraint locking clip.
2. Pull the head restraint out of the front seat
backrest.
E64035
2
1
3. Remove the front seat cushion retainingbolts.
E64036
23 Nm
4. Remove the front seat cushion.
1. Lift the front seat cushion upwards.
2. Pull the front seat cushion forward to detachthe cushion retaining hooks
E64037
1
2
5. Remove the front seat belt buckle.
E64038
47 Nm
6. Remove the front seat base inner trim panel.
1. Detach the trim panel front retaining clip.
2. Lift the trim panel to release the upperretaining clip.
3. Detach the trim panel rear retaining clip.
E64039
2
3
1
G1234698en2010.25 Figo 2/2010
501-10-5Seating501-10-5
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
60/717
-
7/21/2019 Vnx.su Figo Brm B517
61/717
-
7/21/2019 Vnx.su Figo Brm B517
62/717
Rear Seat Backrest Cover
General Equipment
Hog ring pliers
Removal
1. Remove the rear seat cushion assembly.
E128200
25 Nm
2. Remove the safety belt bolt.
E128199
55 Nm
3. Detach the retaining clip and remove the rearscuff plate trim panel.
For additional information, refer to:RearScuff Plate Trim Panel (501-05 Interior Trim
and Ornamentation, Removal andInstallation).
E63916
4. Fold the rear seat back by pressing the pushbutton on both the sides.
E119733
5. Remove the rear seat backrest frame bolts(both sides).
E119732
x2
G1234702en2010.25 Figo 2/2010
501-10-8Seating501-10-8
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
63/717
6. Detach the retaining strip.
TIE0000373
7. Remove the backrest cover.
1. Roll the backrest cover inwards to accessthe pleating hog rings.
2. Cut the hog rings.
TIE0022147
2
2
2
1
8. Remove the rear seat backrest latch.
For additional information, refer to: Rear SeatBackrest Latch(501-10 Seating, Removaland Installation).
9. Remove the rear seat backrest cover.
Installation
NOTE:Use hog ring pliers to close the hog rings.Do not use any other tool. The hog rings must beclosed to overlap as illustrated.
1. To install, reverse the removal procedure.
V4001063
G1234702en2010.25 Figo 2/2010
501-10-9Seating501-10-9
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
64/717
-
7/21/2019 Vnx.su Figo Brm B517
65/717
-
7/21/2019 Vnx.su Figo Brm B517
66/717
-
7/21/2019 Vnx.su Figo Brm B517
67/717
Glass, Frames and Mechanisms
Opening Windows
Manually operated windows are fitted as standard.There is a market option for power windows. Thepower windows are activated by switches onpassenger door ( Passenger side only ) or by amultiple switch on the driver door ( Driver &passenger side only ).
Manually operated rear door windows are installedas standard.
Fixed/Direct Glazed Windows
The windshield and the rear window are directlyglazed to the window opening flange by means ofa polyurethane (PU) adhesive bead. In addition tofixing the glass to the opening flange, the adhesivebead also forms a water tight seal around the inneredge of the glass.
It is essential for good adhesion and sealing ofdirect glazed windows that the correct materialsare used and that the PU adhesive is allowed tocure.
NOTE:Should the ambient temperature fall below10C, warming of the adhesive using a hot air gunshould be employed. The curing time of theadhesive depends not only on temperature, butalso on the relative humidity of the air. The curetime for a warm humid environment will be shorterthan for a cool, dry atmosphere.
NOTE:A surface film of water on the bond line ofthe glass or on the window opening flange willprevent the adhesive correctly bonding the twosurfaces.
Any moisture on the bond line of the glass or onthe window opening flange must be removed usinga hot air gun before applying the PU bead.
To carry out direct glazing operations, an oscillatingcutter, an assortment of special cutting blades, acartridge gun and two glaziers suction cups will berequired, in addition to the contents supplied withthe Ford repair kit.
G1225428en2010.25 Figo 2/2010
501-11-3Glass, Frames and Mechanisms501-11-3
DESCRIPTION AND OPERATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
68/717
-
7/21/2019 Vnx.su Figo Brm B517
69/717
PINPOINT TEST A : ALL POWER WINDOWS ARE INOPERATIVE
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
NOTE:Use a digital multimeter for all electrical measurements.
A1: CHECK FUSE F57 (30A) (CJB)
1 Ignition switch in position 0.
2 Disconnect the Fuse F57 (30A) (CJB).
Is the fuse ok?
YesGO to A2.
NoINSTALL a new fuse. TEST the system for
normal operation. If the fuse fails again repaircircuit CDC21 (GY/BN) using the wiringdiagram. INSTALL a new CJB if necessary.
A2: CHECK FUSE F57 (30A) (CJB) FOR POWER
1 Ignition switch in position 0.
2 Ignition switch in position II.
3 Measure the voltage between fuse F57 (30A)(CJB) pin no 2, circuit CBP57 (BN/GN)component side and ground.
Is the voltage greater than 10 volts?
Yes
E67858
GO to A3.
No
Repair circuit CDC21 (GY/BN) using the wiringdiagram. INSTALL a new CJB if necessary.TEST the system for normal operation.
A3: CHECK THE DRIVER POWER WINDOW CONTROL SWITCH LED
1 Ignition switch in position II.
Do the driver power window control switch LEDilluminate?
Yes
VERIFY the customer concern.
No
GO to A4.
A4: CHECK FOR CONTINUITY BETWEEN THE DRIVER POWER WINDOW CONTROL SWITCHAND GROUND
1 Ignition switch in position 0.
G1225434en2010.25 Figo 2/2010
501-11-5Glass, Frames and Mechanisms501-11-5
DIAGNOSIS AND TESTING
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
70/717
-
7/21/2019 Vnx.su Figo Brm B517
71/717
-
7/21/2019 Vnx.su Figo Brm B517
72/717
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
3 Measure the resistance between the driverpower window control switch CAPW10 pin 4,circuit GD356 (BK/VT), harness side and
ground.
Is the resistance less than 2 ohms?
Yes
E122952
GO to B5.
No
REPAIR circuit GD356 (BK/VT), spliceSAD356 and ground G10. TEST the systemfor normal operation.
B5: CHECK FOR VOLTAGE TO THE DRIVER POWER WINDOW CONTROL SWITCH
1 Ignition switch in position II.
2 Measure the voltage between the driver powerwindow control switch CAPW10 pin 3, circuitCBP57 (BN/GN), harness side and ground.
Is the voltage greater than 10 volts?
Yes
E122954
INSTALL a new driver side power windowswitch. CHECK the operation of the system.
No
LOCATE and RECTIFY the break in the circuitCBP57 (BN/GN) between the driver sidepower window switch and soldered connectionsplice SABP57 using the Wiring Diagram.CHECK the operation of the system.
PINPOINT TEST C : A SINGLE POWER WINDOW IS INOPERATIVE - PASSENGER SIDE
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
NOTE:Use a digital multimeter for all electrical measurements.
C1: DOES THE PASSENGER WINDOW OPERATE FROM THE DRIVER SIDE POWER WINDOWCONTROL SWITCH
1 Ignition switch in position II.
2 Operate the passenger power window from thedriver power window control switch.
Does the passenger power window operate?
YesREPAIR circuit CBP57 (BN/GN). TEST thesystem for normal operation.
No
GO to B4.
G1225434en2010.25 Figo 2/2010
501-11-8Glass, Frames and Mechanisms501-11-8
DIAGNOSIS AND TESTING
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
73/717
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
C2: CHECK THE DRIVER SIDE PASSENGER POWER WINDOW CONTROL SWITCH LED (IFEQUIPPED)
1 Observe the driver side passenger powerwindow control switch LED (if equipped).
Is the driver side passenger power windowcontrol switch LED illuminated?
Yes
GO to C3.
No
LOCATE and RECTIFY the break in the circuitbetween the driver side power window switchand soldered connection using the Wiring
Diagram. CHECK the operation of the system.C3: CHECK THE DOWN CIRCUIT VOLTAGE TO THE PASSENGER POWER WINDOW CONTROLSWITCH
1 Ignition switch in position 0.
2 Disconnect Passenger Power Window ControlSwitch CBPW19.
3 Ignition switch in position II.
4 Operate the driver side passenger powerwindow control switch to the DOWN position.
5 Measure the voltage between the passengerpower window control switch CBPW19 pin 4,circuit CPW12 (GN/OG), harness side andground.
Is the voltage greater than 10 volts?
Yes
E122995
GO to C4.
NoREPAIR circuit CPW12 (GN/OG). TEST the
system for normal operation.
C4: CHECK THE UP CIRCUIT VOLTAGE TO THE PASSENGER POWER WINDOW CONTROLSWITCH
1 Operate the driver side passenger powerwindow control switch to the UP position.
G1225434en2010.25 Figo 2/2010
501-11-9Glass, Frames and Mechanisms501-11-9
DIAGNOSIS AND TESTING
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
74/717
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
2 Measure the voltage between the passengerpower window control switch CBPW19 pin 6,circuit CPW13 (BN/YE), harness side and
ground.
Is the voltage greater than 10 volts?
Yes
E122996
INSTALL a new passenger side power windowswitch. CHECK the operation of the system.
NoREPAIR circuit CPW13 (BN/YE). TEST thesystem for normal operation.
C5: CHECK FOR CONTINUITY BETWEEN THE PASSENGER POWER WINDOW CONTROL SWITCH
DOWN CIRCUIT AND THE PASSENGER POWER WINDOW MOTOR
1 Ignition switch in position 0.
2 Disconnect Power Window Motor CBPW20.
3 Measure the resistance between the passengerpower window control switch CBPW19 pin 3,circuit CPW19 (VT), harness side and thepassenger power window motor CBPW20 pin1, circuit CPW19 (VT), harness side.
Is the resistance less than 2 ohms?
Yes
E122997
GO to C6.
No
REPAIR circuit CPW19 (VT). TEST the systemfor normal operation.
G1225434en2010.25 Figo 2/2010
501-11-10Glass, Frames and Mechanisms501-11-10
DIAGNOSIS AND TESTING
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
75/717
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
C6: CHECK FOR CONTINUITY BETWEEN THE PASSENGER POWER WINDOW CONTROL SWITCHUP CIRCUIT AND THE PASSENGER POWER WINDOW MOTOR
1 Measure the resistance between the passengerpower window control switch CBPW19 pin 5,circuit CPW20 (WH/OG), harness side and thepassenger power window motor CBPW20 pin2, circuit CPW20 (WH/OG), harness side.
Is the resistance less than 2 ohms?
Yes
E122998
INSTALL a new front door window regulatormotor.
REFER to:Front Door Window RegulatorMotor(501-11 Glass, Frames and Mechan-isms, Removal and Installation).
TEST the system for normal operation.
NoREPAIR circuit CPW20 (WH/OG). TEST thesystem for normal operation.
PINPOINT TEST D : THE DEFROST SYSTEM IS INOPERATIVE
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
NOTE:Use a digital multimeter for all electrical measurements.
D1: CHECK THE OPERATION OF THE HEATED REAR WINDOW
1 Ignition switch in position II.
2 Activate on the heated rear window switch.
3 Observe the heated rear window switch
Does the heated rear window LED illuminate?
YesGO to D2.
NoGO to D4.
D2: CHECK THE HEATED REAR WINDOW FOR GROUND
1 Switch off the heated rear window switch.
2 Ignition switch in position 0.
3 Disconnect Heated rear window C4RD02-B.
G1225434en2010.25 Figo 2/2010
501-11-11Glass, Frames and Mechanisms501-11-11
DIAGNOSIS AND TESTING
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
76/717
-
7/21/2019 Vnx.su Figo Brm B517
77/717
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
D5: CHECK F26 (20 A) (CJB) FOR POWER.
1 Measure the voltage between F26 (20 A) (CJB)
pin 2, circuit SBP26 (YE/RD), component sideand ground.
Is the voltage greater than 10 volts?
Yes
E67858
GO to D6.
NoREPAIR circuit SBF05 (GY/RD), using theWiring Diagrams. INSTALL a new CJB ifnecessary. TEST the system for normaloperation.
D6: CHECK THE HEATED REAR WINDOW SWITCH FOR IGNITION POWER
1 Ignition switch in position II.
2 Switch ON the heated rear window.
E67858
3 Measure the voltage between the F34 (3 A)(CJB) pin 2, circuit CBP34 (VT/BN), Componentside and ground.
Is the voltage greater than 10 volts?
Yes
GO to D7.
No
REPAIR circuit CRD06 (BN/YE), using theWiring Diagrams. INSTALL a new CJB ifnecessary. TEST the system for normaloperation.
D7: CHECK THE BFC FOR HEATED REAR WINDOW BATTERY POWER.
1 Ignition switch in position 0.
2 Switch OFF the heated rear window.
3 Disconnect BFC C2AM02-C.
G1225434en2010.25 Figo 2/2010
501-11-13Glass, Frames and Mechanisms501-11-13
DIAGNOSIS AND TESTING
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
78/717
-
7/21/2019 Vnx.su Figo Brm B517
79/717
-
7/21/2019 Vnx.su Figo Brm B517
80/717
DETAILS/RESULTS/ACTIONSTEST CONDITIONS
D13: CHECK THE RESISTANCE OF CIRCUIT GD357 (BK)
1 Measure the resistence between the BFC
C2AM02-C pin 8, circuit GD357 (BK), harnessside and ground.
Is the resistence less than 2 ohms?
Yes
E122988
INSTALL a new BFC. TEST the system fornormal operation.
No
REPAIR circuit GD357 (BK) and ground G13,using the Wiring Diagrams. TEST the systemfor normal operation.
Component Tests
Heated Rear Window Grid Wire Test
1. Using a bright lamp inside the vehicle, visuallyinspect the grid wire from the outside. A brokengrid conductor line will appear as a brown spot.
2. Run the engine at idle. Set the heated rearwindow control switch and lights to ON. The
heated rear window indicator light shouldilluminate.
3. Working inside the vehicle with a multimeter,contact the broad red/brown strips on the heatedrear window positive lead to battery side andnegative lead to ground side. The multimetershould read 10-13 volts. A lower voltage readingindicates a loose heated rear window groundwire connection at the heated rear windowground wire screw.
4. Contact a ground point with the negative leadof the multimeter. The voltage reading should
not change.
5. With the negative lead of the multimetergrounded, touch each grid line of the heatedrear window at its pinpoint with the positive lead.
A reading of approximately six volts indicatesthat the line is OK. A reading of zero voltsindicates that the line is broken between themidpoint and the battery side of the grid line. Areading of 12 volts indicates that the circuit isbroken between the midpoint of the grid line andground.
6. INSTALL a new heated rear window glass.
REFER to:Liftgate Window Glass(501-11Glass, Frames and Mechanisms, Removaland Installation).
G1225434en2010.25 Figo 2/2010
501-11-16Glass, Frames and Mechanisms501-11-16
DIAGNOSIS AND TESTING
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
81/717
Door Window Glass Adjustment(42 001 0)
Adjustment
1. Remove the door trim panel.For additional information, refer to:Front
Door Trim Panel(501-05 Interior Trim andOrnamentation, Removal and Installation).
2.CAUTION: Do not touch the adhesive
surface as re-bonding will be impaired.
NOTE:Do not detach the water shield fully.
Detach the door panel watershield.
Using a plastic knife (disposable cutlery), cutthrough the Butyl strip to enable thewatershield to be peeled back.
E119739
3. Connect the window operating switchelectrical connector.
E119738
4. Loosen the window glass clamp retainingbolts.
Align the retaining screws with the accesshole.
E120496
x2
5. Make sure the glass is inside the door frameouter seal.
E111958
6. Lower the glass to the bottom.
7. Standing inside the door, apply rearwardhand pressure on the outside of the windowglass, at the same time raising the glass toits fully closed position.
TIW4201082
G1230295en2010.25 Figo 2/2010
501-11-17Glass, Frames and Mechanisms501-11-17
GENERAL PROCEDURES
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
82/717
-
7/21/2019 Vnx.su Figo Brm B517
83/717
Windshield Glass(42 115 0)
General Equipment
Hot air gun
Direct glazing cutter for bonded glass
Direct glazing adhesive kit
Direct glazing adhesive oven
Glazing suction cups
Removal
All vehicles
1. Remove the battery ground cable.
For additional information, refer to:BatteryDisconnect and Connect(414-01 Battery,Mounting and Cables, General Procedures).
2. Remove the hood.
For additional information, refer to:Hood(501-02 Front End Body Panels, Removaland Installation).
3. Remove the polyurethane (PU) adhesive capand heat the PU adhesive for a minimum of30 minutes.
TIE0022871
4. Remove the wiper arm covers on both sides.
E119634
5. Remove the wiper arm nuts on both sides.
E119635
6. NOTE: Make sure that the windshield wipermotor is in the park position.
Remove the windshield wiper arms.
E119636
G1225440en2010.25 Figo 2/2010
501-11-19Glass, Frames and Mechanisms501-11-19
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
84/717
-
7/21/2019 Vnx.su Figo Brm B517
85/717
-
7/21/2019 Vnx.su Figo Brm B517
86/717
Discard the locating blocks.
E119737
Installation
All vehicles
1.CAUTION: Do not touch the adhesive
surface as re-bonding will be impaired.
Carefully trim the remaining polyurethane(PU) adhesive from the windshield glassflange to leave approximately 1 mm oftrimmed PU adhesive adhered to the flange.
TIE0001233
2. Install new windshield glass locating blocks.
E119737
3. Check the windshield glass flange fordamaged sheet metal, rust or foreign materialwhich may have caused, or may cause, glassbreakage.
4. CAUTION: To make sure that the PUadhesive cures, it is essential that allbonding surfaces are free of moisture.
Using a hot air gun, apply warm air (25C) tothe windshield glass flange and glass bondline to remove all traces of moisture.
5. Clean the windshield with cleaner.
E122484
6. Apply primer on to the windshield. Make surethat the width is approximately 2 cm as
shown in the picture below. Do not allow theprimer to dry more than 20 minutes.
E122483
20mm
G1225440en2010.25 Figo 2/2010
501-11-22Glass, Frames and Mechanisms501-11-22
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
87/717
7. Clean the body flange with cleaner & applyprimer as shown in the adjacent picture.
E122481
8. NOTE: If the ambient temperature falls below
10C, use a hot air gun and apply warm air(25C) continuously for 15 minutes (insideor outside the vehicle).
Apply sealant on the body flange asspecified. Make sure that the bead height &width is maintained as specified.
E122482
8mm
10mm
9. If the ambient temperature falls below 10C,use a hot air gun and apply warm air (25C)continuously for 15 minutes (inside or
outside the vehicle).
TIE0002380
50 mm
10. NOTE: Discard the first 100 mm of PUadhesive as this may have a reducedworking time.
Points to be taken care during sealant
application.1. Sealant application should be done slowly to
achieve the bead height specified in step 5.Take minimum10 minutes for sealantapplication.
2. The sealant cartridge once opened shouldbe consumed within 20 30 minutes.
3. After sealant application the glass should befixed to body within 10 minutes.
4. All the operations including sealantapplication should be carried out only in roomtemperature & should not be exposed todirect sunlight.
5. To avoid water leaks, any breakage in thecontinuous bead must be overlapped by 20mm.
CAUTION: During the curing period of thePU adhesive, the door windows must beleft open to avoid a build up of pressurewhen the doors are opened and closed.
11. NOTE: Do not handle the windshield in barehands, use only glazing suction cups to
handle it.Locate the windshield on to the body flange& fix it. Press firmly & evenly throughout thearea.
E119735
x2
12. Down the window glass & park the vehiclefor at least 4 hours.
G1225440en2010.25 Figo 2/2010
501-11-23Glass, Frames and Mechanisms501-11-23
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
88/717
-
7/21/2019 Vnx.su Figo Brm B517
89/717
20. Install the interior mirror.
E119736
All vehicles
21. Install the A-pillar trim panels.
VUE0027052
22. Attach the front door opening weatherstripto the A-pillar on both sides.
E119720
23. Install the cowl panel grille.
E119637
x2
24. Install the hood.
For additional information, refer to:Hood(501-02 Front End Body Panels, Removaland Installation).
25. Raise the hood.
26. Install the windshield wiper arms.
TIE0029882
18 Nm
27. Connect the battery ground cable.
For additional information, refer to: BatteryDisconnect and Connect(414-01 Battery,Mounting and Cables, GeneralProcedures).
28. Lower the hood.
G1225440en2010.25 Figo 2/2010
501-11-25Glass, Frames and Mechanisms501-11-25
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
90/717
Liftgate Window Glass
General Equipment
Hot air gun
Direct glazing cutter for bonded glass
Direct glazing adhesive kit
Direct glazing adhesive oven
Glazing suction cups
Removal
1. Remove the polyurethane (PU) adhesive capand heat the PU adhesive for a minimum of
30 minutes.
TIE0022871
2. Remove the parcel shelf ( If equipped ).
TIE0001234
3. Remove the liftgate window wiper motor.
For additional information, refer to:RearWindow Wiper Motor(501-16 Wipers andWashers, Removal and Installation).
4. Remove the liftgate window wiper motorspindle grommet.
E119780
5. Disconnect the heated liftgate window glasselectrical connectors.
TIE0028862
6.WARNING: Wear gloves and eye
protection when working with the glasscutting tool as the cutting operation mayproduce splinters. When using the cutterwear ear protectors. Failure to follow theseinstructions may result in a personal injury.
CAUTION: Make sure the cutting bladesare changed where the cutting depthchanges to avoid damage to the body andtrim panels.
NOTE: Some resistance may be encountered whencutting through the glass locating pegs in thecorners of the glass.
From inside the vehicle using a suitabledirect glazing cutter, cut the PU adhesive tothe given maximum depths.
1. 22 mm.
G1225450en2010.25 Figo 2/2010
501-11-26Glass, Frames and Mechanisms501-11-26
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
91/717
2. 51 mm.
TIE0028865
1
1
22
7. With the aid of another technician, useglazing suction cups to remove the liftgate
window glass.
TIE0028866
Installation
1. Carefully remove the remaining part of thelocating pegs from the liftgate window glassflange.
2.CAUTION: Do not touch the adhesive
surface as re-bonding will be impaired.
Carefully trim the remaining polyurethane(PU) adhesive from the liftgate window glass
flange to leave approximately 1 mm oftrimmed PU adhesive adhered to the flange.
TIE0001233
3. Check the liftgate window glass flange for
damaged sheet metal, rust or foreign materialwhich may have caused, or may cause, glassbreakage.
4.CAUTION: To make sure that the PU
adhesive cures, it is essential that all thebonding surfaces are free of moisture.
Using a hot air gun, apply warm air (25C) tothe liftgate window glass flange and glassbond line to remove all traces of moisture.
5. Prepare the glass, liftgate window glass
flange and trimmed PU adhesive inaccordance with the instructions suppliedwith the PU adhesive kit.
6. NOTE: Discard the first 100 mm of PUadhesive as this may have a reduced workingtime.
NOTE:To avoid water leaks, any breakage in thecontinuous bead must be overlapped by 20 mm.
Apply the PU adhesive in a continuous beadof between 8 and 10 mm in height to the
liftgate window glass flange along the bondline.
TIE0002379
G1225450en2010.25 Figo 2/2010
501-11-27Glass, Frames and Mechanisms501-11-27
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
92/717
7. With the aid of another technician, useglazing suction cups to install the liftgatewindow glass.
Press firmly and evenly into position.
TIE0028866
8.CAUTION: During the curing period of the
PU adhesive, the door windows must be leftopen to avoid a build up of pressure whenthe doors are opened and closed.
Using suitable tape, secure the liftgatewindow glass in the correct position untilthe PU adhesive has cured.
9. If the ambient temperature falls below 10C,use a hot air gun and apply warm air (25C)
continuously for 15 minutes (inside oroutside the vehicle).
TIE0002380
50 mm
10. Connect the heated liftgate window glasselectrical connectors.
TIE0028862
11. Install the liftgate window wiper motor
spindle grommet.
E119780
12. Install the liftgate window wiper motor.
For additional information, refer to:RearWindow Wiper Motor(501-16 Wipers andWashers, Removal and Installation).
13. Install the parcel shelf ( If equipped ).
TIE0001234
G1225450en2010.25 Figo 2/2010
501-11-28Glass, Frames and Mechanisms501-11-28
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
93/717
-
7/21/2019 Vnx.su Figo Brm B517
94/717
7. NOTE: The front door window glass must beremoved towards the outside of the windowopening.
Remove the front door window glass.
1. Lift the glass.2. Tip the glass forwards and remove the glass
from the front door.
TIE0028861
1
2
Installation
1. NOTE: The front door window glass must beinstalled from the outside of the windowopening.
To install, reverse the removal procedure.
G1225452en2010.25 Figo 2/2010
501-11-30Glass, Frames and Mechanisms501-11-30
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
95/717
-
7/21/2019 Vnx.su Figo Brm B517
96/717
1. Remove the front door window regulator nuts.
E124240
x5
Installation
1. To install, reverse the removal procedure.
G1225454en2010.25 Figo 2/2010
501-11-32Glass, Frames and Mechanisms501-11-32
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
97/717
Front Door Window Regulator Motor(33 782 0)
Removal
1. Remove the front door trim panel.
For additional information, refer to:FrontDoor Trim Panel(501-05 Interior Trim andOrnamentation, Removal and Installation).
2. Remove the front door regulator.
For additional information, refer to:FrontDoor Window Regulator(501-11 Glass,Frames and Mechanisms, Removal andInstallation).
3. NOTE: Support the window regulator.
Remove the window regulator motor.
1. Remove the screws.
E119741
x3
Installation
1. To install, reverse the removal procedure.
G1225456en2010.25 Figo 2/2010
501-11-33Glass, Frames and Mechanisms501-11-33
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
98/717
Rear Quarter Window Glass 5-Door(42 514 0)
General Equipment
Hot air gun
Direct glazing cutter for bonded glass
Direct glazing adhesive kit
Direct glazing adhesive oven
Glazing suction cups
Removal
1. Remove the polyurethane (PU) adhesive capand heat the PU adhesive for a minimum of
30 minutes.
TIE0022871
2. Remove the parcel shelf.
TIE0001234
3. Remove the C-Pillar trim panel. For additionalinformation, refer to Section 501-05 [InteriorTrim and Ornamentation].
4. Remove the parcel shelf support.
VUE0027177
5.WARNING: Wear gloves and eye
protection when working with the glasscutting tool as the cutting operation mayproduce splinters. When using the cutterwear ear protectors. Failure to follow theseinstructions may result in personal injury.
CAUTION: Make sure the cutting bladesare changed where the cutting depthchanges to avoid damage to the body andtrim panels.
NOTE: Some resistance may be encountered whencutting through the glass locating pegs in thecorners of the glass.
From inside the vehicle, using a suitabledirect glazing cutter, cut the PU adhesive tothe given maximum depths.
1. 17 mm.
2. 52 mm.
3. 30 mm.
4. 70 mm.
5. 32 mm.
TIE0028856
4
5
2
3
1
1
3
G183795en2010.25 Figo 2/2010
501-11-34Glass, Frames and Mechanisms501-11-34
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
99/717
6. With the aid of another technician, useglazing suction cups to remove the rearquarter window glass.
TIE0028857
Installation
1. Carefully remove the remaining part of thelocating pegs from the rear quarter windowglass flange.
2.CAUTION: Do not touch the adhesive
surface as re-bonding will be impaired.
Carefully trim the remaining PU adhesivefrom the rear quarter window glass flange toleave approximately 1 mm of trimmed PU
adhesive adhered to the flange.
TIE0001233
3. Check the rear quarter window glass flangefor damaged sheet metal, rust or foreignmaterial which may have caused, or maycause, glass breakage.
4.CAUTION: To make sure that the PU
adhesive cures, it is essential that allbonding surfaces are free of moisture.
Using a hot air gun, apply warm air (25C) tothe rear quarter window glass flange andglass bond line to remove all traces ofmoisture.
5. Prepare the glass, rear quarter window glassflange and trimmed PU adhesive inaccordance with the instructions suppliedwith the PU adhesive kit.
6. NOTE: Discard the first 100 mm of PUadhesive as this may have a reduced workingtime.
NOTE:To avoid water leaks, any breakage in thecontinuous bead should be overlapped by 20 mm.
Apply the PU adhesive in a continuous beadof between 8 and 10 mm in height to the rearquarter window glass flange along the bondline.
TIE0023155
7. Use glazing suction cups to install the rearquarter window glass.
Press firmly and evenly into position.
TIE0028857
8.CAUTION: During the curing period of the
PU adhesive, the door windows must be leftopen to avoid a build up of pressure whenthe doors are opened and closed.
Using suitable tape, secure the rear quarterwindow glass in the correct position until
the PU adhesive has cured.
9. If the ambient temperature falls below 10C,use a hot air gun and apply warm air (25C)
G183795en2010.25 Figo 2/2010
501-11-35Glass, Frames and Mechanisms501-11-35
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
100/717
-
7/21/2019 Vnx.su Figo Brm B517
101/717
Rear Door Window Glass(42 315 0)
Removal
All vehicles
1. Remove the rear door trim panel.
For additional information, refer to:RearDoor Trim Panel(501-05 Interior Trim andOrnamentation, Removal and Installation).
2. Remove the rear door inner trim quarterpanel.
E101940
3. Remove the rear door outer trim quarter
panel.1. Remove the screw and tilt the outer trim
quarter panel away from the door.
2. Depress the locking tangs.
E83286
2 2
1
4. NOTE: Do not detach the water shield fully.
Detach the water shield and keep it aside.
E124256
5. Remove the rear door glass frame.
E124246
x2
Vehicles with manual windows
6. Install the window regulator handle.
1. Align the window glass clamp with the accesshole.
TIE0028854
G1225498en2010.25 Figo 2/2010
501-11-37Glass, Frames and Mechanisms501-11-37
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
102/717
-
7/21/2019 Vnx.su Figo Brm B517
103/717
Rear Door Window Regulator(42 338 0)
Removal
1. Remove the rear door window glass.
For additional information, refer to:RearDoor Window Glass (501-11 Glass, Framesand Mechanisms, Removal andInstallation).
2. Remove the window regulator handle.
TIE0028854
3. Remove the window regulator.
1. Remove the window regulator nuts.
E124240
x5
Installation
1. To install, reverse the removal procedure.
G1225476en2010.25 Figo 2/2010
501-11-39Glass, Frames and Mechanisms501-11-39
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
104/717
SECTION 501-12 Instrument Panel and Console
VEHICLE APPLICATION:2010.25 Figo
PAGECONTENTS
SPECIFICATIONS
501-12-2Specifications......................................................................................................................
REMOVAL AND INSTALLATION
501-12-3(43 814 0)Floor Console.................................................................................................501-12-5(43 644 0)Instrument Panel............................................................................................
501-12-1Instrument Panel and Console501-12-1
.
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
105/717
-
7/21/2019 Vnx.su Figo Brm B517
106/717
Floor Console(43 814 0)
Removal
All vehicles
1. Remove the screw cover cap (if equipped).
E127995
2. Remove the screw.
E127996
3. Remove the parking brake upper trim panel(if equipped).
E127997
4. NOTE: Seats removed shown for clarity.
Remove the parking brake trim panel (ifequipped).
1. Remove the screws on both sides.
E127998
x2
All vehicles
5. Remove the gear knob.
E127999
6. Detach the gearshift lever boot retaining trimpanel.
E128000
7. Remove the gearshift lever trim panel fromthe floor console.
G1225617en2010.25 Figo 2/2010
501-12-3Instrument Panel and Console501-12-3
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
107/717
-
7/21/2019 Vnx.su Figo Brm B517
108/717
Instrument Panel(43 644 0)
Removal
WARNING: To avoid accidentaldeployment, the air bag control modulebackup power supply must be depleted.Wait at least one minute afterdisconnecting the battery ground cable(s)before commencing any repair oradjustment to the supplemental restraintsystem (SRS). Failure to follow theseinstructions may result in personal injury.
CAUTION: When removing or installing theinstrument panel, care must be taken not
to scratch or damage the instrument panelsurface.
1. Remove the floor console.
For additional information, refer to:FloorConsole(501-12 Instrument Panel andConsole, Removal and Installation).
2. Remove the steering column.
For additional information, refer to: SteeringColumn- 1.19L Duratec-16V (71PS) -Sigma/1.6L Duratec-16V (74kW/100PS) -
Sigma/1.4L Duratec-16V (59kW/80PS) -Sigma, 1.4L Duratorq-TDCi (DV) Diesel(211-04 Steering Column, Removal andInstallation).
3. Remove the climate control assembly.
For additional information, refer to:ClimateControl Assembly(412-04 ControlComponents, Removal and Installation).
4. Remove the instrument cluster.
For additional information, refer to:Instrument Cluster(413-01 InstrumentCluster, Removal and Installation).
-
5. Remove the A-pillar trim panel (both sides).
VUE0027052
6. Remove the glove box.
1. Push glove box sides inwards.
2. Tilt the glove box forward.
3. Pull the glove box away from the instrumentpanel.
E104581
11
2
7. Remove the passenger airbag (if equipped).
For additional information, refer to:Passenger Air Bag Module(501-20Supplemental Restraint System, Removaland Installation).
8. Detach the data link connector (DLC) frominstrument panel.
G1225510en2010.25 Figo 2/2010
501-12-5Instrument Panel and Console501-12-5
REMOVAL AND INSTALLATION
http://vnx.su
-
7/21/2019 Vnx.su Figo Brm B517
109/717
Tilt the DLC retaining clip forward.
E67420
9. Disconnect the hazard switch electrica