-
WIDOS Miniplast 2
-
WIDOS SchweißmaschineMiniplast 2
Die MINIPLAST 2 ist eine Schweiß-maschine für die Heizelement-Stumpf-schweißung von PE-, PP- und PVDF-Rohren und Formteilen von DA 20 bisDA 110 mm. Die Grundmaschine besitztzwei breite Alu-Grundspannwerkzeuge,die je Seite 15° schwenkbar sind zurSegmentbogenherstellung. Durch Ein-schrauben von 4 schmalen Reduktions-spanneinsätzen wird eine Doppel-spannung bei den kleineren Durchmes-sern erzielt. Für Formstücke mit kurzenSchenkeln steht ein schmales Fitting-spannwerkzeug zur Verfügung. Durchdie spezielle Konstruktion der Druckauf-bringung kann die Maschine direkt ankürzeste Rohrstutzen an Wänden undPlatten gespannt werden. Durch dieleichte und kompakte Bauweise eignetsich die Maschine hervorragend zumEinsatz im Rohrnetz und zu Montagear-beiten. Beim stationären Einsatz kann dieMaschine im Schraubstock oder mit derTischhalterung fixiert werden.
Zusätzlich ist eine verlängerte Aus-führung zur Herstellung von T-Stückenund Rohrbögen 90° (bis DA 90 mm) er-hältlich. Beide Grundspannwerkzeugesind je Seite bis 45° schwenkbar. DieseGrundmaschine ist mit einer Höhen- undSeitenverstellung ausgerüstet.
Der leichte kompakte manuelle Planho-bel wird über eine Ratsche betätigt.Optional ist ein elektrischer Planhobelerhältlich.
Das elektronisch geregelte Heizelementgem. DVS 2208 (230 V/500 Watt) hateinen Durchmesser von ≈120 mm, eineAntihaft-Beschichtung und Kontroll-lampen für Netz- und Intervallkontrolle.
Zum geschützten Abstellen des Planho-bels und des Heizelements steht ein Ein-stellkasten zur Verfügung. Der Stahl-blechtragekasten dient zum Transportund zum geschützten Lagern der kom-pletten MINIPLAST 2.
Heizelement-Stumpfschweiß-maschine für die Werkstatt,Baustelle und die Montage.
Butt-welding machine with hea-ting element for the workshop,building site and installation.
WIDOS welding machineMiniplast 2
The MINIPLAST 2 is a welding machinefor the heating element butt welding ofPE, PP and PVDF pipes and fittings fromOD 20 to OD 110 mm. The basic ma-chine has two large aluminium basicclamping tools which are swivelling 15°on each side for the fabrication of seg-mented bends. By screwing in 4 smallreduction clamping inserts, a doubleclamping is obtained at smaller diame-ters. For fittings with short legs, a smallfitting clamping tool is available. Dueto the special construction of the pres-sure build-up device, the machine canbe fixed directly at very short pipeends on walls and sheets. Due to itslight and compact construction, the ma-chine is ideally suited for the use in pipeline system and for assembly work.In case of stationary use, the machinecan be fixed in the vice or with the tablesupport.
In addition, an extended version for thefabrication of T-pieces and elbows 90°(up to OD 90 mm) is available. Onboth sides, each basic clamping toolcan be swivelled up to 45°. This basicmachine is vertically and horizontallyadjustable.
The light and compact manual planer isoperated by means of a ratchet. As anoption, an electric planer is available.
The electronically adjusted heating ele-ment in accordance with DVS 2208(230 V/500 W) has a diameter of ≈120mm, an anti-stick coating and controllamps for system and interval checking.
For the safe storage of the planerand heating element, a heat-protectedbox is available. The sheet steel carry-ing case serves for the transport andprotected storage of the completeMINIPLAST 2.
Machine de soudage bout-à-bout à élément chauffant pouratelier, chantier et montage.
Machine à souder WIDOSMiniplast 2
La MINIPLAST 2 est une machine desoudage bout-à-bout à élément chauf-fant pour tubes et raccords en PE, PP etPVDF du DE 20 au DE 110 mm. La ma-chine de base dispose de deux largesoutils de serrage de base en aluminiumqui sont pivotables par 15° de chaquecôté pour la fabrication de coudes seg-mentés. En vissant 4 bagues de com-pensation étroites, un double serrageest atteint aux diamètres plus petits.Pour les raccords à courtes jambes, unoutil de serrage étroit pour coudes etraccords est disponible. Grâce à laconstruction spéciale du dispositif pro-ducteur de pres-sion, la machine peutêtre fixée directement aux manchonsles plus courts sur des murs et plaques.Grâce à sa construction légère et com-pacte, la machine se prête parfaitementà l’usage dans le réseau des conduiteset aux travaux de montage. En casd‘usage station-naire, la machine peutêtre fixée dans l’étau ou avec l’établi.
Une version rallongée pour la fabrica-tion des pièces en Té et des coudessegmentés 90° (jusqu’au DE 90 mm) estaussi disponible. Les deux dispositifs deserrage de base sont pivotables jusq’à45° de chaque côté. Cette machine debase est pourvu d’un déplacement enhauteur et latéral.
Le rabot manuel léger et compacteest opéré à l’aide d’un cliquet. Commel’option, un rabot électrique est dis-ponible.
Le miroir à souder est réglé électroni-que et conformément à DVS 2208(230 V/500 W) et a un diamètre de≈120 mm, un revêtement téfloné et deslampes de contrôle pour le contrôle duréseau et des intervalles.
Pour le rangement protégé du rabot etdu miroir à souder, un boîtier supportest disponible. La valise métallique sertau transport et au stockage protégé dela MINIPLAST 2 complète.
-
Um 45° geschwenkte Grundspannelemente mitSeiten- und Höhenverstellung, und zur Herstel-lung von T-Stücke 90°.
Basic clamping swivelled up to 45° with horizontaland vertical adjustment, and for the fabricationof T-pieces 90°.
Les deux dispositifs de serrage de base pivotésjusqu’à 45° avec déplacement en hauteur etlatéral, et pour la fabrication de pièces enTé à 90°.
Planhobel zur Miniplast in kurzer und langer Variante entweder manuell über Ratsche (links) oder in elek-trischer Ausführung (rechts).
Planer to Miniplast in short and long version either manual via ratchet (left side) or in electric version(right side).
Rabot pour la Miniplast en version courte et longue, ou bien à mécanisme manuel (image gauche) ou bienen version électrique (image droite).
Durch die handliche kleine Bauweise kann diestabile MINIPLAST leicht im Rohrnetz eingesetztwerden.
Due to the handy and small construction the solidMINIPLAST is easy to use in pipe-systems.
Grâce à sa petite construction maniable, laMINIPLAST peut facilement être utilisée dans leréseau des conduites.
Grundmaschine mit schmalen Fittingspannwerk-zeugen zur Aufnahme von gespritzten Formteilenmit kurzen Spannenden, dadurch können auchextrem kurz vorstehende Rohrenden gespanntund geschweißt werden.
Basic machine with narrow clamping tools forfittings for the fixing of molded fittings with shortclamping ends, by this it is possible to clamp andweld extremely short overlapping pipe ends aswell.
Machine de base avec outils de serrage étroitspour coudes et raccords pour la fixation de rac-cords injectés à courts bouts de serrage, par celail est possible de serrer et souder aussi des boutsde tube extrêmement courts et saillissants.
Spezielles Spannwerkzeug als Vorschweißbund-halter
Special clamping tool as stub end holder
Outil de serrage spécial comme dispositif d’appuide présoudage
-
WIDOSWilhelm Dommer Söhne GmbHEinsteinstraße 5D-71254 Ditzingen-HeimerdingenFon +49 7152 9939 0Fax +49 7152 9939 40www.widos.de · [email protected]
Ä
Stand 11/2010
Technische Änderungenvorbehalten!Subject to technicalmodifications!Sous réserve de modi-fications techniques!
Bezeichnung
Grundmaschine mit 2 breitenGrundspannwerkzeugen DA 110
Tischhalterung
Fittingsspannwerkzeug DA 110links
Fittingsspannwerkzeug DA 110rechts
Heizelement 230 V / 500 W
Planhobel mit Ratschenmechanismus
Planhobel elektrisch 230 V/400 W
Einstellkasten
Reduktionsspanneinsätze(1 Satz = 8 Halbschalen)DA 20DA 25DA 32DA 40DA 50DA 63DA 75DA 90
Innensechskantschlüssel Gr. 4Innensechskantschlüssel Gr. 3
Stahlblechtragekasten(45 x 33 x 36 cm)(71 x 41 x 41 cm)(63 x 47 x 35 cm)
**) für verlängerte Version zur Herstellungvon T-Stücken
**) für verlängerte Version zur Herstellungvon T-Stücken mit elektrischem Planhobel
Stück
1
1
1
1
1
1
1
1
11111111
11
111
kg
6,3
1,8
0,9
0,9
2,5
2,1
5,7
2,5
0,80,80,80,70,70,60,60,4
0,050,05
12,013,217,3
Bestell-Nr.
450100451100 *)
450101451101 *)
4508110L
4508110R
HMINIEHMINIET *)
45042204514230 *)45042304524230 *)EIN0045
20080202008025200803220080402008050200806320080752008090
ZIG04ZIG03
TK0450TK04511 *)TK0110 **)
WIDOS Miniplast 2Zusammenstellung
Description
Basic machine with 2 clamping tools(wide) OD 110
Table support
Clamping tool (small) for fittings OD 110left
Clamping tool (small) for fittings OD 110right
Heating element 230 V / 500 W
Ratchet assisted planer
Electric planer 230 V/400 W
Heat-protected box
Clampings inserts(1 set = 8 halfshells)DA 20DA 25DA 32DA 40DA 50DA 63DA 75DA 90
Allen key size 4Allen key size 3
Sheet steel carrying case(45 x 33 x 36 cm)(71 x 41 x 41 cm)(63 x 47 x 35 cm)
**) for extended version, that can fabricateT-pieces
**) for extended version, that can fabricateT-pieces with electric planer
Qty.
1
1
1
1
1
1
1
1
11111111
11
111
kg
6,3
1,8
0,9
0,9
2,5
2,1
5,7
2,5
0,80,80,80,70,70,60,60,4
0,050,05
12,013,217,3
Prod.-No.
450100451100 *)
450101451101 *)
4508110L
4508110R
HMINIEHMINIET *)
45042204514230 *)45042304524230 *)EIN0045
20080202008025200803220080402008050200806320080752008090
ZIG04ZIG03
TK0450TK04511 *)TK0110 **)
WIDOS Miniplast 2Set composition
Description
Machine de base avec 2 outils de serragelarges DE 110
Support pour fixation sur établi
Outil de serrage de base pour coudeset raccords DE 110 (gauche)
Outil de serrage de base pour coudeset raccords DE 110 (droite)
Élément chauffant 230 V / 500 W
Rabot à mechanisme manuel
Rabot électrique 230 V/400 W
Boîtier support
Bagues de compensation(1 jeu = 8 demi-coquilles)DA 20DA 25DA 32DA 40DA 50DA 63DA 75DA 90
Clé pour vis à six pans taille 4Clé pour vis à six pans taille 3
Valise métallique(45 x 33 x 36 cm)(71 x 41 x 41 cm)(63 x 47 x 35 cm)
**) pour la version rallongée à fabricationdes pièces en Té
**) pour la version rallongée à fabricationdes pièces en Té avec rabot électrique
Qté.
1
1
1
1
1
1
1
1
11111111
11
111
kg
6,3
1,8
0,9
0,9
2,5
2,1
5,7
2,5
0,80,80,80,70,70,60,60,4
0,050,05
12,013,217,3
Réf.
450100451100 *)
450101451101 *)
4508110L
4508110R
HMINIEHMINIET *)
45042204514230 *)45042304524230 *)EIN0045
20080202008025200803220080402008050200806320080752008090
ZIG04ZIG03
TK0450TK04511 *)TK0110 **)
WIDOS Miniplast 2Composition