draft indian standard

23
BUREAU OF INDIAN STANDARDS PRODUCTION AND GENERAL ENGINEERING रलेख रेषण संञापन/DOCUMENT DESPATCH ADVICE संदभ /Ref. दनांक/Date पीजीडी 37/(10521, 10522, 10523, 10525, 10528, 10530, 10531, 10532, 10533)डबय PGD 37/(10521, 10522, 10523, 10525, 10528, 10530, 10531, 10532, 10533) W 20.07.2016 तकनीकसमित/TECHNICAL COMMITTEE: सािाय इंजीतनयरएवं बंधक िनक वषय समितपीजीडी 37 / General Engineering and Fasteners Standards Sectional Committee, PGD 37 सभी सदय को /To all Members of : 1. ) उपादन एवं सामाय इंजीननयरी वागीय पररषद / Production & General Engineering Division Council ) सामाय इंजीननयरी एवं बंधक मानक वषय सममनि पीजीडी 37 / General Engineering and Fasteners Standards Sectional Committee, PGD 37 2. ǽचि रखनȯ वालȯ अय सदय/Other Interested Members Dear Sir(s), पया सामाय इंजीननयरी एवं बंधक मानक वषय सममनि पीजीडी 37 वारा तȰयार कए गए तननमलखखत संलन रलȯख रात करं /Please find enclosed the following document prepared by the General Engineering and Fasteners Standards Sectional Committee, PGD 37 Sl. No रलेख संया/DOC NO. शीषक /TITLE 1. पीजीडी/PGD 37(10521)W IS 1367(Pt 5): XXXX/ ISO 898- 5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread 2. पीजीडी/PGD 37(10522)W IS 1367(Pt 6): XXXX /ISO 898- 2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Part 2: Nuts with specified property classes Coarse thread and fine pitch thread यापक पररचालन मं मसौदा DRAFTS IN WIDE CIRCULATION

Upload: vudang

Post on 02-Jan-2017

223 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Draft Indian Standard

BUREAU OF INDIAN STANDARDS PRODUCTION AND GENERAL ENGINEERING

रलख रषण सञापन/DOCUMENT DESPATCH ADVICE

सदभ /Ref. ददनाक/Date

पीजीडी 37/(10521,

10522, 10523, 10525,

10528, 10530, 10531,

10532, 10533)डबय PGD 37/(10521, 10522,

10523, 10525, 10528,

10530, 10531, 10532,

10533) W

20.07.2016

तकनीकी समितत/TECHNICAL COMMITTEE:

सािाय इजीतनयरी एव बधक िानक ववषय समितत पीजीडी 37 / General Engineering and Fasteners

Standards Sectional Committee, PGD 37

सभी सदय को /To all Members of :

1. क) उपादन एव सामाय इजीननयरी ववागीय पररषद / Production & General Engineering Division Council ख) सामाय इजीननयरी एव बधक मानक ववषय सममनि पीजीडी 37 / General Engineering and

Fasteners Standards Sectional Committee, PGD 37

2. चि रखन वाल अय सदय/Other Interested Members

Dear Sir(s),

कपया सामाय इजीननयरी एव बधक मानक ववषय सममनि पीजीडी 37 वारा तयार ककए गए

तननमलखखत सलन रलख रात कर/Please find enclosed the following document prepared by the

General Engineering and Fasteners Standards Sectional Committee, PGD 37

Sl.

No

रलख स या/DOC NO. शी षक /TITLE

1. पीजीडी/PGD 37(10521)W

IS 1367(Pt 5): XXXX/

ISO 898- 5:2012

Mechanical properties of fasteners made of carbon steel and alloy

steel Part 5: Set screws and similar threaded fasteners with specified

hardness classes — Coarse thread and fine pitch thread

2. पीजीडी/PGD 37(10522)W

IS 1367(Pt 6): XXXX

/ISO 898- 2:2012

Mechanical properties of fasteners made of carbon steel and alloy

steel — Part 2: Nuts with specified property classes — Coarse thread

and fine pitch thread

यापक पररचालन म मसौदा DRAFTS IN WIDE CIRCULATION

Page 2: Draft Indian Standard

3. पीजीडी/PGD 37(10523)W

IS 1367(Pt 14/Sec 1):

XXXX

/ISO 3506 –1: 2009

Mechanical properties of corrosion resistant stainless steel fasteners

— Part 14 Section 1: Bolts, screws and studs

4. पीजीडी/PGD 37(10525)W

IS 1367(Pt 14/Sec 2):

XXXX

ISO 3506 –2: 2009

Mechanical properties of corrosion resistant stainless steel fasteners

— Part 14 Section 2: Nuts

5. पीजीडी/PGD 37(10528)W

IS 1367(Pt 14/Sec 3):

XXXX

ISO 3506 –3: 2009

Mechanical properties of corrosion resistant stainless steel fasteners

— Part 14 Section 3: Set screws and similar fasteners not under

tensile stress

6. पीजीडी/PGD 37(10530)W

IS 1368: XXXX

ISO 4573: 2011

Fasteners — Ends of parts with external ISO metric thread

7. पीजीडी/PGD 37(10531)W

IS 3458: XXXX

ISO 1119: 2011

Geometrical product specifications (GPS) — Series of conical tapers

and taper angles

8. पीजीडी/PGD 37(10532)W

IS 4206: XXXX

ISO 888 : 2012

Fasteners — Bolts, screws and studs — Nominal lengths and thread

lengths

9. पीजीडी/PGD 37(10533)W

IS 14962 (Part 1) : XXXX

ISO 965-1 : 2013

ISO general purpose metric screw threads — Tolerances — Part 1:

Principles and basic data

कपया इस रलख का अवलोकन कर और अपनी सिततय यह बतात हए भज कक अतत: यदद य िानक

क प ि रकामित हो जाए तो इन पर अिल करन ि आपक यवसाय अथवा कारोबार ि या कदिनाईय आ सकती ह/Kindly examine the draft amendment to standards and forward your views stating

any difficulties which you are likely to experience in your business or profession, if these are

finally adopted as National Standards.

सिततय भजन की अतति ततचथ/Last date for comments: 20.10.2016.

यदद आपकी कोई सितत हो तो कपया ददय गय रा प ि अयोहताषरी को उपरोत पत पर

भज/Comments, if any, may please be made in the format as given in overleaf and mailed to the

undersigned at the above address.

यदद आपकी कोई सिततय रात नही होती ह या कवल सपादकीय सिततय रात होती ह तो हि उपरोत रताव को भारतीय िानक क अतमित प स अचधरहण करन की आपकी सहितत िान

लन की अनितत द। परत यदद हि तकनीकी सिततय रात होती ह तब या तो व ववषय समितत क

Page 3: Draft Indian Standard

अयष स पराििश पिात भारतीय िानक क अतमित प ि पाररत कर अचधरदहत ककए जाएग अथवा उनकी इछानसार आवयक कायशवाही हत वविय समितत क वविाराथश भज जाएग/In case, no

comments are received or comments received are of editorial nature, you will kindly permit us

to presume your approval for the above documents as finalised for adoption as Indian

Standards. However, in case of comments of technical in nature are received then it may be

finalized either in consultation with the Chairman, Sectional Committee or referred to the

Sectional Committee.

धयवाद/Thanking you,

लन/Encls.: उपरोत/As above.

भवदीय/Yours faithfully,

(राजपाल/RAJPAL)

रिख/ Head (पीजीडी/PGD)

Email: [email protected]

Page 4: Draft Indian Standard

FORMAT FOR SENDING COMMENTS ON BIS DOCUMENTS

(Please use A4 size sheet of paper only and type within fields indicated. Comments on each

clauses/sub-clauses/table/fig. etc.. are started on a fresh box. Information in Column 4 should

include reasons for the comments and suggestions for modified wording of the clauses when the

existing text is found not acceptable. Adherence to this format facilitates Secretariat’s work)

Sl.

No

रलख स या/DOC NO. शी षक /TITLE

10. पीजीडी/PGD 37(10521)W

IS 1367(Pt 5): XXXX/

ISO 898- 5:2012

Mechanical properties of fasteners made of carbon steel and alloy

steel Part 5: Set screws and similar threaded fasteners with specified

hardness classes — Coarse thread and fine pitch thread

11. पीजीडी/PGD 37(10522)W

IS 1367(Pt 6): XXXX

/ISO 898- 2:2012

Mechanical properties of fasteners made of carbon steel and alloy

steel — Part 2: Nuts with specified property classes — Coarse thread

and fine pitch thread

12. पीजीडी/PGD 37(10523)W

IS 1367(Pt 14/Sec 1):

XXXX

/ISO 3506 –1: 2009

Mechanical properties of corrosion resistant stainless steel fasteners

— Part 14 Section 1: Bolts, screws and studs

13. पीजीडी/PGD 37(10525)W

IS 1367(Pt 14/Sec 2):

XXXX

ISO 3506 –2: 2009

Mechanical properties of corrosion resistant stainless steel fasteners

— Part 14 Section 2: Nuts

14. पीजीडी/PGD 37(10528)W

IS 1367(Pt 14/Sec 3):

XXXX

ISO 3506 –3: 2009

Mechanical properties of corrosion resistant stainless steel fasteners

— Part 14 Section 3: Set screws and similar fasteners not under

tensile stress

15. पीजीडी/PGD 37(10530)W

IS 1368: XXXX

ISO 4573: 2011

Fasteners — Ends of parts with external ISO metric thread

16. पीजीडी/PGD 37(10531)W

IS 3458: XXXX

ISO 1119: 2011

Geometrical product specifications (GPS) — Series of conical tapers

and taper angles

17. पीजीडी/PGD 37(10532)W

IS 4206: XXXX

ISO 888 : 2012

Fasteners — Bolts, screws and studs — Nominal lengths and thread

lengths

18. पीजीडी/PGD 37(10533)W

IS 14962 (Part 1) : XXXX

ISO 965-1 : 2013

ISO general purpose metric screw threads — Tolerances — Part 1:

Principles and basic data

Page 5: Draft Indian Standard

LAST DATE OF COMMENTS: 20.10.2016

NAME OF THE COMMENTATOR/ORGANIZATION: _________________________

रलख सया/DOC NO. शी षक /TITLE

Sl.

No.

Clause/Subclause/

para/table/fig.

No. commented

Commentator/

Organization/

Abbreviation

Type of Comments

(General/Editorial/

Technical)

Justification

Proposed

change

For Bureau’s Use

Page 6: Draft Indian Standard

For Comments only

Doc. No.: PGD 37(10521) W

IS 1367(Pt 5): XXXX

ISO 898- 5:2012

July 2016

Draft Indian Standard Mechanical properties of fasteners made of carbon steel and alloy steel

Part 5: Set screws and similar threaded fasteners with specified hardness classes

— Coarse thread and fine pitch thread

ICS 21.060.10

Not to be reproduced without permission Last date for receipt of comment

of BIS or used as Standard is 20.010.2016

NATIONAL FOREWORD

This Draft Indian Standard which is identical with ISO 898-5 : 2012 ‘Mechanical

properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and

similar threaded fasteners with specified hardness classes — Coarse thread and fine

pitch thread’ issued by the International Organization for Standardization (ISO) will be

adopted by the Bureau of Indian Standards on the recommendation of the General

Engineering and Fasteners Standards Sectional Committee and approval of the

Production and General Engineering Division Council.

The text of ISO Standard has been approved as suitable for publication as Indian

Standard without deviation. Certain terminology and conventions are, however, not

identical to those used in the Indian Standards; attention is particularly drawn to the

following:

a) Wherever the words `International Standard’ appears, referring to this

standard, they should be read as `Indian Standard’

b) Comma (,) has been used as decimal marker while in Indian Standards it is

current practice to use a full point (.) as the decimal marker.

In adopted standard, references appear to certain International Standards for which

Indian Standards also exist. The corresponding Indian Standards which are to be

substituted in their respective places are listed below along with their degree of

equivalence for the editions indicated:

International Standard Corresponding Indian Standard Degree Of

Equivalence

ISO 225, Fasteners — Bolts,

screws, studs and nuts —

Symbols and descriptions of

IS 8536:1987 Fasteners – Bolts,

screws, studs and nuts –

Symbols and designation of

Identical to

ISO 225:1983

Page 7: Draft Indian Standard

dimensions dimensions (first revision)

ISO 965-1, ISO general-purpose

metric screw threads —

Tolerances — Part 1: Principles

and basic data

IS 14962(Pt 1): 2001 ISO

general purpose metric screw

threads – Tolerances – Part 1:

Principles and basic data

Identical to

ISO 965-

1:1998

ISO 965-3, ISO general purpose

metric screw threads —

Tolerances — Part 3: Deviations

for constructional

screen threads

IS 14962(Pt 3): 2001 ISO

general purpose metric screw

threads – Tolerances – Part 3:

Deviation for constructional

screw threads

Identical to

ISO 965-

3:1998

ISO 6157-1, Fasteners — Surface

discontinuities — Part 1: Bolts,

screws and studs for general

requirements

IS 1367 ( Part 9 / Sec 1) : 1993

Technical supply conditions for

threaded steel fasteners Part 9

Surface discontinuities Section 1

Bolts screws and studs for

general applications

Identical to

ISO 6157-

1:1988

ISO 6506-1, Metallic materials —

Brinell hardness test — Part 1:

Test method

IS 1500 (Part 1) : 2013 Metallic

materials — Brinell hardness

test — Part 1: Test method

Identical to

ISO 6506-1 :

2005

ISO 6507-1, Metallic materials —

Vickers hardness test — Part 1:

Test method

IS 1501 (Part 1) : 2013 Metallic

materials — Vickers hardness

test — Part 1: Test method

Identical to

ISO 6507-1 :

2005

ISO 6508-1, Metallic materials —

Rockwell hardness test — Part 1:

Test method (scales A, B, C, D, E,

F, G, H, K, N, T)

IS 1586 (Part 1) : 2012 Metallic

materials — Rockwell hardness

test — Part 1: Test method

(scales A, B, C, D, E, F, G, H, K,

N, T)

Identical to

ISO 6508-1 :

2005

ISO 16426, Fasteners — Quality

assurance system

Doc. No.: PGD 37(1601)

Fasteners — Quality assurance

system

Identical to

ISO 16426 :

2002

For the purpose of deciding whether a particular requirement of this standard is

complied with, the final value, observed or calculated, expressing the result of a test or

analysis, shall be rounded off in accordance with IS 2 : 1960 ‘Rules for rounding off numerical values (revised)’. The number of significant places retained in the rounded

off value should be the same as that of the specified value in this standard.

Page 8: Draft Indian Standard

For Comments only

Doc. No.: PGD 37(10522) W

IS 1367(Pt 6): XXXX

ISO 898- 2:2012

July 2016

Draft Indian Standard Mechanical properties of fasteners made of carbon steel and alloy steel —

Part 2: Nuts with specified property classes —

Coarse thread and fine pitch thread

ICS 21.060.20

Not to be reproduced without permission Last date for receipt of comment

of BIS or used as Standard is 20.010.2016

NATIONAL FOREWORD

This Draft Indian Standard which is identical with ISO 898-2 : 2012 ‘Mechanical

properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with

specified property classes — Coarse thread and fine pitch thread’ issued by the

International Organization for Standardization (ISO) will be adopted by the Bureau of

Indian Standards on the recommendation of the General Engineering and Fasteners

Standards Sectional Committee and approval of the Production and General

Engineering Division Council.

The text of ISO Standard has been approved as suitable for publication as Indian

Standard without deviation. Certain terminology and conventions are, however, not

identical to those used in the Indian Standards; attention is particularly drawn to the

following:

a) Wherever the words `International Standard’ appears, referring to this

standard, they should be read as `Indian Standard’

b) Comma (,) has been used as decimal marker while in Indian Standards it is

current practice to use a full point (.) as the decimal marker.

In adopted standard, references appear to certain International Standards for which

Indian Standards also exist. The corresponding Indian Standards which are to be

substituted in their respective places are listed below along with their degree of

equivalence for the editions indicated:

International Standard Corresponding Indian Standard Degree Of

Equivalence

ISO 6157-2, Fasteners — Surface

discontinuities — Part 2: Nuts

IS 1367 ( Part 10) : 2002

Technical Supply Conditions for

Threaded Steel Fasteners - Part

Identical to

ISO 6157-2:

Page 9: Draft Indian Standard

10 Surface Discontinuities -

Nuts (Third Revision)

1995

ISO 6506-1, Metallic materials —

Brinell hardness test — Part 1:

Test method

IS 1500 (Part 1) : 2013 Metallic

materials — Brinell hardness

test — Part 1: Test method

Identical to

ISO 6506-1 :

2005

ISO 6507-1, Metallic materials —

Vickers hardness test — Part 1:

Test method

IS 1501 (Part 1) : 2013 Metallic

materials — Vickers hardness

test — Part 1: Test method

Identical to

ISO 6507-1 :

2005

ISO 6508-1, Metallic materials —

Rockwell hardness test — Part 1:

Test method (scales A, B, C, D, E,

F, G, H, K, N, T)

IS 1586 (Part 1) : 2012 Metallic

materials — Rockwell hardness

test — Part 1: Test method

(scales A, B, C, D, E, F, G, H, K,

N, T)

Identical to

ISO 6508-1 :

2005

ISO 6892-1, Metallic materials —

Tensile testing — Part 1: Method

of test at room temperature

IS 1608 : 2005 METALLIC

MATERIALS - TENSILE

TESTING AT AMBIENT

TEMPERATURE ( Third

Revision)

Identical to

ISO 6892 :

1998

ISO 7500-1, Metallic materials —

Verification of static uniaxial

testing machines — Part 1:

Tension/compression testing

machines — Verification and

calibration of the force-measuring

system

IS 1828 (Part 1) : 2015 Metallic

materials — Verification of static

uniaxial testing machines —

Part 1: Tension/compression

testing machines — Verification

and calibration of the force-

measuring system

Identical to

ISO 7500-1 :

2004

ISO 16426, Fasteners — Quality

assurance system

Doc. No.: PGD 37(1601)

Fasteners — Quality assurance

system

Identical to

ISO 16426 :

2002

For the purpose of deciding whether a particular requirement of this standard is

complied with, the final value, observed or calculated, expressing the result of a test or

analysis, shall be rounded off in accordance with IS 2 : 1960 ‘Rules for rounding off numerical values (revised)’. The number of significant places retained in the rounded

off value should be the same as that of the specified value in this standard.

Page 10: Draft Indian Standard

For Comments only

Doc. No.: PGD 37(10523) W

IS 1367(Pt 14/Sec 1): XXXX

ISO 3506 –1: 2009

July 2016

Draft Indian Standard Mechanical properties of corrosion resistant stainless steel fasteners —

Part 1 Section 1: Bolts, screws and studs

ICS 21.060.10

Not to be reproduced without permission Last date for receipt of comment

of BIS or used as Standard is 20.10.2016

NATIONAL FOREWORD

This Draft Indian Standard which is identical with ISO 3506-1 : 2009 Mechanical

properties of corrosion resistant stainless steel fasteners — Part 1: Bolts, screws and

studs’ issued by the International Organization for Standardization (ISO) will be adopted

by the Bureau of Indian Standards on the recommendation of the General Engineering

and Fasteners Standards Sectional Committee and approval of the Production and

General Engineering Division Council.

The text of ISO Standard has been approved as suitable for publication as Indian

Standard without deviation. Certain terminology and conventions are, however, not

identical to those used in the Indian Standards; attention is particularly drawn to the

following:

a) Wherever the words `International Standard’ appears, referring to this

standard, they should be read as `Indian Standard’

b) Comma (,) has been used as decimal marker while in Indian Standards it is

current practice to use a full point (.) as the decimal marker.

In adopted standard, references appear to certain International Standards for which

Indian Standards also exist. The corresponding Indian Standards which are to be

substituted in their respective places are listed below along with their degree of

equivalence for the editions indicated:

International Standard Corresponding Indian Standard Degree Of

Equivalence

ISO 68-1, ISO general purpose screw

threads — Basic profile — Part 1: Metric

screw threads

IS 4218 (Part 1):2001 ISO General purpose

metric screw threads: Part 1 Basic profile

(second revision)

Identical to

ISO 68-

1:1998

ISO 261, ISO general purpose metric IS 4218(Part 2): 2001 ISO General purpose

metric screw threads: Part 2 General plan Identical to

Page 11: Draft Indian Standard

screw threads — General plan (second revision) ISO 261 : 1998

ISO 262, ISO general purpose metric

screw threads — Selected sizes for

screws, bolts and nuts

IS 4218(Part 4): 2001 ISO General purpose

metric screw threads: Part 4 Selected sizes for

screws, bolts and nuts (second revision)

Identical to ISO 262 : 1998

ISO 898-1, Mechanical properties of

fasteners made of carbon steel and alloy

steel — Part 1: Bolts, screws

and studs with specified property classes

— Coarse thread and fine pitch thread

IS 1367(Part 3):2002 Technical supply

conditions for threaded steel fasteners: Part 3

Mechanical properties of fasteners made of

carbon steel and alloy steel — Bolts, screws

and studs (fourth revision)

Identical to ISO 898-1 :

1999

ISO 6506-1, Metallic materials —

Brinell hardness test — Part 1:

Test method

IS 1500 (Part 1) : 2013 Metallic

materials — Brinell hardness

test — Part 1: Test method

Identical to

ISO 6506-1 :

2005

ISO 6507-1, Metallic materials —

Vickers hardness test — Part 1:

Test method

IS 1501 (Part 1) : 2013 Metallic

materials — Vickers hardness

test — Part 1: Test method

Identical to

ISO 6507-1 :

2005

ISO 6508-1, Metallic materials —

Rockwell hardness test — Part 1:

Test method (scales A, B, C, D, E,

F, G, H, K, N, T)

IS 1586 (Part 1) : 2012 Metallic

materials — Rockwell hardness

test — Part 1: Test method

(scales A, B, C, D, E, F, G, H, K,

N, T)

Identical to

ISO 6508-1 :

2005

ISO 6892-1, Metallic materials —

Tensile testing — Part 1: Method

of test at room temperature

IS 1608 : 2005 METALLIC

MATERIALS - TENSILE

TESTING AT AMBIENT

TEMPERATURE ( Third

Revision)

Identical to

ISO 6892 :

1998

ISO 16426, Fasteners — Quality

assurance system

Doc. No.: PGD 37(1601)

Fasteners — Quality assurance

system

Identical to

ISO 16426 :

2002

The technical committee has reviewed the provisions of the following International Standards referred in this adopted standard and has decided that they are acceptable for use in conjunction with this standard:

International Standard

Title

ISO 3651-1 Determination of resistance to intergranular corrosion of stainless steels —

Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion

test in nitric acid medium by measurement of loss in mass (Huey test)

ISO 3651-2 Determination of resistance to intergranular corrosion of stainless steels —

Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels —

Corrosion test in media containing sulfuric acid

Page 12: Draft Indian Standard

ISO 16048 Passivation of corrosion-resistant stainless-steel fasteners

For the purpose of deciding whether a particular requirement of this standard is

complied with, the final value, observed or calculated, expressing the result of a test or

analysis, shall be rounded off in accordance with IS 2 : 1960 ‘Rules for rounding off numerical values (revised)’. The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.

Page 13: Draft Indian Standard

For Comments only

Doc. No.: PGD 37(10528) W

IS 1367(Pt 14/Sec 3): XXXX

ISO 3506 –3: 2009

July 2016

Draft Indian Standard Mechanical properties of corrosion resistant stainless steel fasteners —

Part 14 Section 3: Set screws and similar fasteners not under tensile stress

ICS 21.060.10

Not to be reproduced without permission Last date for receipt of comment

of BIS or used as Standard is 20.10.2016

NATIONAL FOREWORD

This Draft Indian Standard which is identical with ISO 3506-3 : 2009 Mechanical

properties of corrosion resistant stainless steel fasteners — Part 3: Set screws and

similar fasteners not under tensile stress’ issued by the International Organization for

Standardization (ISO) will be adopted by the Bureau of Indian Standards on the

recommendation of the General Engineering and Fasteners Standards Sectional

Committee and approval of the Production and General Engineering Division Council.

The text of ISO Standard has been approved as suitable for publication as Indian

Standard without deviation. Certain terminology and conventions are, however, not

identical to those used in the Indian Standards; attention is particularly drawn to the

following:

a) Wherever the words `International Standard’ appears, referring to this

standard, they should be read as `Indian Standard’

b) Comma (,) has been used as decimal marker while in Indian Standards it is

current practice to use a full point (.) as the decimal marker.

In adopted standard, references appear to certain International Standards for which

Indian Standards also exist. The corresponding Indian Standards which are to be

substituted in their respective places are listed below along with their degree of

equivalence for the editions indicated:

International Standard Corresponding Indian Standard Degree Of

Equivalence

ISO 68-1, ISO general purpose

screw threads — Basic profile —

Part 1: Metric screw threads

IS 4218 (Part 1):2001 ISO

General purpose metric screw

threads: Part 1 Basic profile

(second revision)

Identical to

ISO 68-

1:1998

ISO 261, ISO general purpose IS 4218(Part 2): 2001 ISO Identical to

Page 14: Draft Indian Standard

metric screw threads — General

plan

General purpose metric screw

threads: Part 2 General plan

(second revision)

ISO 261 :

1998

ISO 262, ISO general purpose

metric screw threads — Selected

sizes for screws, bolts and nuts

IS 4218(Part 4): 2001 ISO

General purpose metric screw

threads: Part 4 Selected sizes

for screws, bolts and nuts

(second revision)

Identical to

ISO 262 :

1998

ISO 898-5, Mechanical properties

of fasteners made of carbon steel

and alloy steel — Part 5: Set

screws and

similar threaded fasteners not

under tensile stresses

Doc. No.: PGD 37( ) IS

1367(Pt 5): XXXX Mechanical

properties of fasteners made of

carbon steel and alloy steel —

Part 5: Set screws and

similar threaded fasteners not

under tensile stresses

Identical to

ISO 898-5 :

2012

ISO 6506-1, Metallic materials —

Brinell hardness test — Part 1:

Test method

IS 1500 (Part 1) : 2013 Metallic

materials — Brinell hardness

test — Part 1: Test method

Identical to

ISO 6506-1 :

2005

ISO 6507-1, Metallic materials —

Vickers hardness test — Part 1:

Test method

IS 1501 (Part 1) : 2013 Metallic

materials — Vickers hardness

test — Part 1: Test method

Identical to

ISO 6507-1 :

2005

ISO 6508-1, Metallic materials —

Rockwell hardness test — Part 1:

Test method (scales A, B, C, D, E,

F, G, H, K, N, T)

IS 1586 (Part 1) : 2012 Metallic

materials — Rockwell hardness

test — Part 1: Test method

(scales A, B, C, D, E, F, G, H, K,

N, T)

Identical to

ISO 6508-1 :

2005

ISO 16426, Fasteners — Quality

assurance system

Doc. No.: PGD 37(1601)

Fasteners — Quality assurance

system

Identical to

ISO 16426 :

2002

The technical committee has reviewed the provisions of the following International Standards referred in this adopted standard and has decided that they are acceptable for use in conjunction with this standard:

International Standard

Title

ISO 3651-1 Determination of resistance to intergranular corrosion of

stainless steels — Part 1: Austenitic and ferritic-austenitic

(duplex) stainless steels — Corrosion test in nitric acid medium

Page 15: Draft Indian Standard

by measurement of loss in mass (Huey test)

ISO 3651-2 Determination of resistance to intergranular corrosion of

stainless steels — Part 2: Ferritic, austenitic and ferritic-

austenitic (duplex) stainless steels — Corrosion test in media

containing sulfuric acid

ISO 16048 Passivation of corrosion-resistant stainless-steel fasteners

For the purpose of deciding whether a particular requirement of this standard is

complied with, the final value, observed or calculated, expressing the result of a test or

analysis, shall be rounded off in accordance with IS 2 : 1960 ‘Rules for rounding off numerical values (revised)’. The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.

Page 16: Draft Indian Standard

For Comments only

Doc. No.: PGD 37(10530) W

IS 1368: XXXX

ISO 4573: 2011

July 2016

Draft Indian Standard

Fasteners — Ends of parts with external ISO metric thread

ICS 21.060.01

Not to be reproduced without permission Last date for receipt of comment

of BIS or used as Standard is 20.10.2016

NATIONAL FOREWORD

This Draft Indian Standard which is identical with ISO 4573: 2011 ‘Fasteners — Ends of

parts with external ISO metric thread’ issued by the International Organization for

Standardization (ISO) will be adopted by the Bureau of Indian Standards on the

recommendation of the General Engineering and Fasteners Standards Sectional

Committee and approval of the Production and General Engineering Division Council.

The text of ISO Standard has been approved as suitable for publication as Indian

Standard without deviation. Certain terminology and conventions are, however, not

identical to those used in the Indian Standards; attention is particularly drawn to the

following:

a) Wherever the words `International Standard’ appears, referring to this

standard, they should be read as `Indian Standard’

b) Comma (,) has been used as decimal marker while in Indian Standards it is

current practice to use a full point (.) as the decimal marker.

In adopted standard, references appear to certain International Standards for which

Indian Standards also exist. The corresponding Indian Standards which are to be

substituted in their respective places are listed below along with their degree of

equivalence for the editions indicated:

International Standard Corresponding Indian Standard Degree Of

Equivalence

ISO 225, Fasteners — Bolts, screws, studs

and nuts — Symbols and descriptions of

dimensions

IS 8536 : 1987 FASTENERS - BOLTS,

SCREWS, STUDS AND NUTS - SYMBOLS

AND DESIGNATION OF DIMENSIONS (

First Revision )

Identical to

ISO 225 :

1983

ISO 4027, Hexagon socket set screws with

cone point

IS 6094 (Part 2): 2006 HEXAGON

SOCKET SET SCREWS PART 2 WITH

Identical to

Page 17: Draft Indian Standard

CONE POINT ( Third Revision) ISO 4027:2003

For the purpose of deciding whether a particular requirement of this standard is

complied with, the final value, observed or calculated, expressing the result of a test or

analysis, shall be rounded off in accordance with IS 2 : 1960 ‘Rules for rounding off numerical values (revised)’. The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.

Page 18: Draft Indian Standard

For Comments only

Doc. No.: PGD 37(10531) W

IS 3458: XXXX

ISO 1119: 2011

July 2016

Draft Indian Standard

Geometrical product specifications (GPS) —

Series of conical tapers and taper angles

ICS 17.040.01

Not to be reproduced without permission Last date for receipt of comment

of BIS or used as Standard is 20.10.2016

NATIONAL FOREWORD

This Draft Indian Standard which is identical with ISO 1119 : 2011 ‘Geometrical product

specifications (GPS) — Series of conical tapers and taper angles’ issued by the

International Organization for Standardization (ISO) will be adopted by the Bureau of

Indian Standards on the recommendation of the General Engineering and Fasteners

Standards Sectional Committee and approval of the Production and General

Engineering Division Council.

The text of ISO Standard has been approved as suitable for publication as Indian

Standard without deviation. Certain terminology and conventions are, however, not

identical to those used in the Indian Standards; attention is particularly drawn to the

following:

a) Wherever the words `International Standard’ appears, referring to this

standard, they should be read as `Indian Standard’

b) Comma (,) has been used as decimal marker while in Indian Standards it is

current practice to use a full point (.) as the decimal marker.

In adopted standard, references appear to certain International Standards for which

Indian Standards also exist. The corresponding Indian Standards which are to be

substituted in their respective places are listed below along with their degree of

equivalence for the editions indicated:

International Standard Corresponding Indian Standard Degree Of

Equivalence

ISO 3040, Geometrical product specifications

(GPS) — Dimensioning and tolerancing —

Cones

IS 10718 : 1993 TECHNICAL

DRAWINGS - DIMENSIO-NS AND

TOLERANCING OF CONES ( First

Revision )

Identical to

ISO 3040 : 1990

Page 19: Draft Indian Standard

For the purpose of deciding whether a particular requirement of this standard is

complied with, the final value, observed or calculated, expressing the result of a test or

analysis, shall be rounded off in accordance with IS 2 : 1960 ‘Rules for rounding off numerical values (revised)’. The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.

Page 20: Draft Indian Standard

For Comments only

Doc. No.: PGD 37(10532) W

IS 4206: XXXX

ISO 888 : 2012

July 2016

Draft Indian Standard

Fasteners —

Bolts, screws and studs — Nominal lengths and thread lengths ICS 21.060.10

Not to be reproduced without permission Last date for receipt of comment

of BIS or used as Standard is 20.10.2016

NATIONAL FOREWORD

This Draft Indian Standard which is identical with ISO 888 : 2012 ‘Fasteners — Bolts,

screws and studs — Nominal lengths and thread lengths ’ issued by the International

Organization for Standardization (ISO) will be adopted by the Bureau of Indian

Standards on the recommendation of the General Engineering and Fasteners

Standards Sectional Committee and approval of the Production and General

Engineering Division Council.

The text of ISO Standard has been approved as suitable for publication as Indian

Standard without deviation. Certain terminology and conventions are, however, not

identical to those used in the Indian Standards; attention is particularly drawn to the

following:

a) Wherever the words `International Standard’ appears, referring to this

standard, they should be read as `Indian Standard’

b) Comma (,) has been used as decimal marker while in Indian Standards it is

current practice to use a full point (.) as the decimal marker.

In adopted standard, references appear to certain International Standards for which

Indian Standards also exist. The corresponding Indian Standards which are to be

substituted in their respective places are listed below along with their degree of

equivalence for the editions indicated:

International Standard Corresponding Indian Standard Degree Of

Equivalence

ISO 68-1, ISO general purpose

screw threads — Basic profile —

Part 1: Metric screw threads

IS 4218 (Part 1):2001 ISO

General purpose metric screw

threads: Part 1 Basic profile

(second revision)

Identical to

ISO 68-

1:1998

Page 21: Draft Indian Standard

ISO 225, Fasteners — Bolts,

screws, studs and nuts —

Symbols and descriptions of

dimensions

IS 8536 : 1987 FASTENERS -

BOLTS, SCREWS, STUDS

AND NUTS - SYMBOLS AND

DESIGNATION OF

DIMENSIONS ( First Revision )

Identical to

ISO 225 :

1983

ISO 4753, Fasteners — Ends of

parts with external ISO metric

thread

Doc. No.: PGD 37( ) IS 1368:

XXXX Fasteners — Ends of

parts with external ISO metric

thread

Identical to

ISO 4573:

2011

ISO 4759-1, Tolerances for

fasteners — Part 1: Bolts, screws,

studs and nuts — Product grades

A, B and C

IS 1367 ( Part 2) : 2002

Technical Supply Conditions for

Threaded Steel Fasteners - Part

2 Tolerances for Fasteners -

Bolts Screws Studs and Nuts -

Product Grades A B and C

(Third Revision )

Identical to

ISO 4759-1 :

2000

For the purpose of deciding whether a particular requirement of this standard is

complied with, the final value, observed or calculated, expressing the result of a test or

analysis, shall be rounded off in accordance with IS 2 : 1960 ‘Rules for rounding off numerical values (revised)’. The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.

Page 22: Draft Indian Standard

For Comments only

Doc. No.: PGD 37(10533) W

IS 14962 (Part 1) : XXXX

ISO 965-1 : 2013

July 2016

Draft Indian Standard ISO general purpose metric screw threads —

Tolerances — Part 1: Principles and basic data

ICS 21.040.10

Not to be reproduced without permission Last date for receipt of comment

of BIS or used as Standard is 20.10.2016

NATIONAL FOREWORD

This Draft Indian Standard which is identical with ISO 965-1 : 2013 ‘ISO general

purpose metric screw threads — Tolerances — Part 1 : Principles and basic data’ issued by the International Organization for Standardization (ISO) will be adopted by the

Bureau of Indian Standards on the recommendation of the General Engineering and

Fasteners Standards Sectional Committee and approval of the Production and General

Engineering Division Council.

The text of ISO Standard has been approved as suitable for publication as Indian

Standard without deviation. Certain terminology and conventions are, however, not

identical to those used in the Indian Standards; attention is particularly drawn to the

following:

a) Wherever the words `International Standard’ appears, referring to this

standard, they should be read as `Indian Standard’

b) Comma (,) has been used as decimal marker while in Indian Standards it is

current practice to use a full point (.) as the decimal marker.

In adopted standard, references appear to certain International Standards for which

Indian Standards also exist. The corresponding Indian Standards which are to be

substituted in their respective places are listed below along with their degree of

equivalence for the editions indicated:

International Standard Corresponding Indian Standard Degree Of

Equivalence

ISO 68-1, ISO general purpose

screw threads — Basic profile —

Part 1: Metric screw threads

IS 4218 (Part 1):2001 ISO

General purpose metric screw

threads: Part 1 Basic profile

(second revision)

Identical to

ISO 68-

1:1998

ISO 261, ISO general purpose metric 1S4218 ( Part2 ) :2001 ISO GENERAL Identical to

Page 23: Draft Indian Standard

screw threads — General plan PURPOSE METRIC PART 2 GENERAL

PLAN ( Second Revision

ISO 261:1998

ISO 1502, ISO general-purpose metric

screw threads — Gauges and gauging

IS 2334:2001 ISO GENERAL PURPOSE

METRIC SCREW THREADS — GAUGES

AND GAUGING (Second Revision)

Identical to

ISO 1502:1996

ISO 5408, Screw threads — Vocabulary IS/ISO 5408 : 2009 Screw threads —

Vocabulary Identical

For the purpose of deciding whether a particular requirement of this standard is

complied with, the final value, observed or calculated, expressing the result of a test or

analysis, shall be rounded off in accordance with IS 2 : 1960 ‘Rules for rounding off numerical values (revised)’. The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.