dragon wire mesh welding machine

河北龙筑贸易有限公司Hebei Dragon Construction Trading Co.,ltd

Tel: 0086-15230827668 Skype: hank.zhao3E-Mail:[email protected] Http:// www.asteelbuilding.com

☆ Automatic reinforcing mesh machine production line

Parameter

The product model：Full automatic reinforcing mesh product line IThe control system：CNCPower system：Electromagnetic brake motor

Characteristic：Both line wires and cross wires are per straighten, cut and fed automatic. The finished mesh is automaticstacking and packing. Cross wire hopper which can save one labor. Automatically arranging, catching,aligning and feeding line wires. Automatically outputting, dropping, stacking, aligning and packing finishedmesh. Different from ordinary reinforcing mesh welding equipment, the line wires and cross wires are fedautomatically. Automatic turning over, dropping and packaging mesh instead of manually lifting, placingand bunding mesh, which maximized save labor and greatly increase production.

http://www.asteelbuilding.com



GWC-2500A (3-8)wire diameter:3-8 丝径 number of electrodes:32

space of line wire:50-300 space of cross wire:50-300

rated electrical power:12*125KVA welding speed:0-110 times /min

width of mesh：2500mm/2100mm/1600mm/1200mm

overall dimention:20*5*2.3m rated voltage:380v

GWC-2500A (5-12)wire diameter:5-12 number of electrodes:24


rated electrical power:12*125KVA

width of mesh：2500mm/2100mm/1600mm





☆ Reinforcing Mesh Machine

Function features:

This kind machine is our latest developed reinforcing mesh welding machine. The line wire and the weft wire are pre-straight and pre-cut.The line wire is feeding by the servo motor ,pulling the wire net by the servo motor auto. The welding power comes from the spring. It’seasy to control the welding pressure . The weft wire feeding from the multi hopper which capacity is more over ten times than thetraditional hopper. The new machine added the bear wire net and carry equipment that makes the working more convenience . Thewelding part is used the springiness input wire trunking that makes the welding copper use for long time. This machine adoptssynchronous control technique. The cent-control and welding time are composed of PLC program system. The input front-panel is touchscreen , the operate is more intelligent and reasonable.

GWC-2500A (3-8)wire diameter:3-8 number of electrodes:24 or 48


welding speed:0-60 times /min

width of mesh：3300mm/3000mm/2900mm/2500mm/2100mm





GWC-2500D (5-12)wire diameter:5-12 number of electrodes:24


welding speed:0-50 times /min rated voltage:380v

width of mesh：3300mm/3000mm/2900mm/2500mm

overall dimention:20*5*2.3m




☆ Automatic Mine Timbering Mesh Welding Machine

Parameter

The product model：Full automatic reinforcing mesh product line IIThe control system：CNCPower system：Electromagnetic brake motor

Characteristic：Both line wire coils and cross wire coils are automatically straighten, cut and fed. The finished mesh is alsoautomatically stacked. Line wires are automatically straightening, storage and feeding. Cross wires areautomatically straightening, storage and feeding. CNC setting meshes length, turning over, dropping,stacking, aligning and packaging. Compared with ordinary reinforcing mesh welding equipment, both linewires and cross wires are fed with coils. Automatically turning over, dropping and packaging mesh insteadof artificial lifting, placing and bunding mesh which maximized save labor and greatly increasedproduction.




The main parameterWire diameter 4-8mm Line wire form Coil

Line wire distance 50-200mm Cross wire form Coil

Cross wire distance 50-200mm Rated voltage 380v

Wire mesh width 1600mm Rated capacity

Welding speed 0-80 times/min Dimension 3100*40000*3000mm

Electrode number 16 or 32 Wire meshlength

6000mm

The finished mesh( in panels)




☆ Welded mesh machine

Function Features:

The machine adopts electrical and electronic syschronous control technique both welding time and cent-control welding is composedof digital and integrated electric circuit. This operation is accurate, it has stable function, firm welded point and without welded tracks.Not only welding speed is fast but also it is easy to learn and operate. The machine is equipped with precise equipment for weftcutting(that won the nation patent ZL02208722.2) and position(that won the nation patent ZL02208721.4), so the length of wefts isidentical and regular, it is unnecessary to slice the side, mesh panel drawing system adopts elastic tension link(that met the nation patentZL200520024380.9) and mesh opening positioning device, it is easy to regulate mesh hole and mesh opening size is rather accurate,welding aperture could adjust randomly within certain range.




The main parameterWire diameter 3-6mm feeding of line

wirecoil

space of wire 50*50-300*300mm feeding of crosswire

Pre-straightened and cut

width of mesh 3000mm/2500mm/2100mm/1600mm/1200mm

welding speed 0-60times /min rated electricalpower

number ofelectrodes

48 machine weight 4.5T

The finished products (in panels or in rolls)




☆ Automatic fence mesh welding machine

Function features: motor drive

This machine adopts synchronous control technique. The cent-control and welding time are composed of PLC program system . Theinput front-panel has two forms, touch screen and keyboard that makes the machine more intelligent and reasonable and it could press atone time, times welding . Welding by electromotor ; the hopper adopts the steeping motor; brake motor wheels ;pulling the wire net is




controlled by the steeping motor . The line wire and the weft wire are pre-straight and pre-cut . The greatest advantage is you can adjustthe distance of weft wire at random on the same one piece wire mesh sheet.

The main parameter

Wire diameter 3-6mm Rated voltage 380v

Weldingaperture

50*50-300*300mm Rated electricalpower

Width of mesh 3000mm/2500mm/2100mm/1600mm/1200mm

Number ofelectrodes

48 Machine weight 4.2T

Welding speed 0-60 times/min Overalldimension

6*3.2*1.8m

The finished products (in panels)




☆ Brick Force Mesh Machine

Function features:

This machine adopts synchronous control technique,both the welding time and cent-control weling is composed ofdigital and integrated electric

circuit.this operation is accurate,it has atable fucntion,firm welded point and without welded tracks.not only welding speed is fast but also it is

easy to learn and operate.the step motor controls fallen wefts structure and drawing material are automatic(this technology has won the nationa

patent ZL200520024381.3 so it is even and accurate,the edge of msh is regular,it is unnecesary to slice the side.drawing mesh adopts the device

with the elastic tension link(which met the national patent ZL200520024380.9)and fxing the mash,it is easy to regulate mesh hole and mesh se is

rather accurate,welding sperture could also adjust randomly within the range.it is automatic to make meshin pieces and in rolls.

The main parameterWire diameter 1.6-2.5mm Rated voltage 380v

Space of crosswire

65mm、115mm、

165mmSpace of line wires 250-300mm

Rated electricalpower

2*56KVA Number ofelectrodes

8 OR 6

Overalldimension

6*1.5*1.5 Welding speed 0-30




The finished products (in rolls)




☆ Mine Timbering MeshWelding Machine

Function Features:

It adopts synchronous control technology. The welding time and free running welding are controlled by PLC numerical programmablesystem. The input panel falls into two types, touch screen or keyboard, which makes the opearation more reasonable and moreintelligentizing. The welding is drived by pneumatic system, which makes the adusting of the welding pressure simple and convinent.The transversal wire feeding system is with hopper type drived by step motor. Both the mesh pulling system and longitudinal wirefeeding system are controlled by step motor. It is special for mine timbering mesh and the mesh opening size can be adjustable withincertain scope.

GWC-2500(3-8)Wire diameter 3-8mm Line wire form Pre-cut wire

Line wire distance 50-300 Cross wire form Pre- cut wire

Cross wiredistance

50-300 Rated voltage 380v 50Hz

Wire mesh width 2500mm

Welding speed 0-50times/min Dimension 3100*40000*3000mm

Electrode number 24 or 48 Wire mesh length 6000mm




The finished products (in panel)




☆ Wire mesh welding machine

Function Characteristics ----motor power

1.This machine adopts electrical & electronic synchronous control technique both separate-phase welding and welding time is composedof digital and integrated electric circuit. This opeartion is accurate,it has stable function ,firm welded point and without welded tracks.

2.The cross and line wires are fed from coils.

3.This machine is equipped with precise equipment for weft cutting (that won the nation patent ZL2208722.2)and position (that won thenation patent AL02208721.4),so the length of wefts is identical and regular,it is unnecessary to slice the side.

4.Mesh pulling system adopts elastic tension link(that won the nation patent ZL200520024380.9)and opening positioning mesh,it is easyto regulate the mesh hole and mesh opening size is rather accurate,welding aperture could adjust randomly with range. Not only weldingspeed is fast but also it is easy to learn and operate.Only two men can finish the operation.

5.The finished products can be in coil or in panel.




The main parameterwire diameter 1.5-2.4mm Rated voltage 380v

Welding aperture 50*50-150*150 Rated electricalpower

56KVA*2

Width of mesh 1200mm Overalldimension

2.5*2.5*1.5m

Number ofelectrodes

25 Machine weight 2.8T

Welding speed 0-80 times/min

The finished mesh( in panels )




☆ Animal Cages Welding Machine

The main parameterWire diameter 2.2-3mm Rated voltage 380v

Welding aperture 50*50-200*200 Rated electricalpower

Customized

Width of mesh 1200mm/1600mm

Number ofelectrodes

Customized Machine weight 3.2T

Welding speed 0-60 times/min Overalldimension

1.8*2.5*1.8m




The finished mesh




☆ Precise cutting machine

The main parameter

Model specification

Mesh cutting/shearing machine Precise cutting machine

width 2600mm/2100mm/1600mm/1300mm

Wire diameter 2-5mm

Motor power 7.5KW

Weight 3.3T

Dimension 2600*1000*1500mm

application Construction wire mesh machine




☆ Mesh rolling machine

The main parameter

Model Parameter

Width 2500mm/2100mm

Wire diameter 3-6mm

Mesh coil length <=50m

dimension 2500*1500*1300

application Building mesh welding machine




☆ Automatic mesh rolling machine

Parameter

The product model：Mesh rolling machineThe control system：The control panel (button)Power system：Motor

Characteristic：Mesh rolling machine is used to roll the finished mesh to coils,which is convenient for transformation andstock.Main features of standard mesh rolling machine:simple structure,easy to operate ,unloading meshmanually after finishing the mesh coil. Main features of automatic mesh rolling and loading machine: It’sequipped with sensor.The rolling speed is automatically adjusted according to the welding speed,and it couldalways keep the wire mesh fasten; Unloading mesh coil automatic after finished the rolling mesh,reduce thelabor intensity




The main parameter

Model Parameter

Wire diameter 3-6mm

Width 2500mm

Internal mesh coil diameter 350mm

External mesh coil diameter 350-1000mm

Max.weight 800kg

Max, mesh coil length 50meters

☆ Ordinary wire straightening and cutting machine




The main parameter

Wire

straightening and cutting machine(3-6)

Model JY 3-6/3-8/2-4

Power 380V 50hz

Wire diameter 3-6mm/3-8mm/2-4mm

Straightening motor 1.5KW

Cutting motor 0.75KW

Max. Length 1m-3m-6m

Weight About 160kgs

Speed 30M/min




ParameterThe product model：Wire straightening and cutting machineThe control system：The control panel (button)Power system：Electromagnetic brake motor

Characteristic：

Function Feature: Wire straightening and cutting machine is used to straightening and cutting cold /hotrolling bar into rod wires.Main features: cutting fixed length straightening wires adopt pneumatic clutchcontrol system,higher cutting speed,less scratch.The machine operation is simple,convenient and quick topadjust size.

The main parameter:Diameter 3-6mm

Length 0.8-12m

Speed 90-110m/min

Size(L× W× H) 7.6m×1.1m×1m




☆ Wire straightening and cutting machine (5-12)

The main parameter:Diameter 5-12mm

Length 0.8-12m

Speed 90-130m/min

Size(L× W× H) 7.6m×1.1m×1m

NOTE: Those machines’ parameter is our standard machine, if you have other requirement, tell usplease. Our technology department will design for you.


dragon wire mesh welding machine

Business