H A N D L E F O R E M E R G E N C Y E X I T S

ostARKPANIC HANDLE

21.5

35.2 27.5

27.5

40

!2420

15.5

21.53

181

38.5

4-!12

2-!24

13.5

47.5

44

8.5

28

210288

4-M5 tapped hole

3-M4tapped hole

3-!8

4

21.5

35.2

40

!2420

181

38.5

4-!12

2-!24

13.5

47.5

44

3-!12

20

Head Office2-13-22, Minamihorie, Nishi-ku, Osaka, 550-0015, Japan.

Osaka Office2-13-22, Minamihorie, Nishi-ku, Osaka, 550-0015, Japan.tel: +81-(0)6-6532-3731 fax: +81-(0)6-6533-2293

Tokyo Office2-9-5, Shirakawa, Koto-ku, Tokyo, 135-0021, Japan.tel: +81-(0)3-3630-2811 fax: +81-(0)3-3630-2816

Nagoya Office / Showroom3-20, Funado-cho, Nakagawa-ku, Nagoya, 454-0805, Japan.tel: +81-(0)52-363-5221 fax: +81-(0)52-363-5255

Osaka Showroom2-13-22, Minamihorie, Nishi-ku, Osaka, 550-0015, Japan. ｠｠tel: +81-(0)6-6532-8920 fax: +81-(0)6-6533-0224

Tokyo Showroom2-9-5, Shirakawa, Koto-ku, Tokyo, 135-0021, Japan.tel: +81-(0)3-6689-2980 fax: +81-(0)3-6689-2986

Singapore Office410 North Bridge Rd Singapore 188726tel ＋65-6407-7496

www.artunion.co.jp

UNION CORPORATION JAPAN

Neoism Door Handles Innov Lever Handles Urgent Fire Extinguisher & AED CasesArchiParts Architectural HardwareUniSmart Storage Space HandBar Grab RailsCastal & MetalArt Manufactured HardwareFloor System Floor FixturesNaviLine Guidance for the Visually ImpairedHuLandScape Urban Landscaping

Archism Architectural Hardware

ITEM

UniArtStylio

Modelize Residential Products

Hotel Products

Pregano

Office Sanitary Products

Oasia

Entrance Products

GLORIOUS

Safety Fencing & Bollards

HuLandScape Urban Landscaping

Printed 2019.7 1

Drawing | PHA200S-KLX

PHA200W-KLXPHA200W-KLX-L ¥297,000 leftPHA200W-KLX-R ¥297,000 right

Stainless Steel, Hairline & Aluminum, Baked Finish, Black + White Bronze Plated

■Specify the direction of swing (from the inside, left or right).

■Use with a door closer.

■The rear opening side is temporarily fixed when activated to prevent the floor from interfering with the lower latch.

■A special snow and freeze resistant Keylex cover is also available. (Sold separately)

one-point fastening (center latches) + two-point fastening (upper and lower latches)

PHA200S-KLXPHA200S-KLX-L ¥198,000 leftPHA200S-KLX-R ¥198,000 right

Stainless Steel, Hairline & Aluminum, Baked Finish, Black + White Bronze Plated

■Specify the hinge side (from the inside, left or right).

■Use with a door closer.

■A special snow and freeze resistant Keylex cover is also available. (Sold separately)

one-point fastening (center latches)

66.2

57.5

33.1

33.1

6003717.3

3030 60.2

60016 288 210 36 1050

40

66 6638 76

31.526 44

70DT

35～45

28

50.7

70

330

82

64

131

26.7

8.5 8.5

■ For unlocking

■ Steps for changing code number For security, regular change of code is recommended.

■Correct position of lever handle

■Under auto locking system function・ Proceed (1) to (4) for unlocking.

■Under passage function・ Open door by pulling down lever only.

・ Unlock by key only. Not workable by button operation.

(1)Punch reset buttonTo clear wrongly operated record if any person touched before you start punching.

(2)Punch correct code numbers.

(3)Punch the enter button.(4)Pull down the lever handle.

Open the door by lowering the Lever.

Cylinder for changing code.

Unlock using only a key. (Using the buttons is not necessary)

F r om o u t s i d e

O u t s i d e I n s i d e

■You open door by ostARK.

＊New code set up is arrangeable as lock body remains on door.＊Make new code set up as door keeps opened.

① ③Punch reset button

④Enter new code number.

Irregular position Regular position

STEP 1①Punch reset button.②Put the key into cylinder and turn right 90 degrees then return key to original point and pull it out.

STEP 2③Punch reset button.④Enter new code number as per your selection.⑤Put the key into cylinder and turn left(to set direction) and pull it out.

Note : After you set the new code number, better check if it is correctly encoded by reviewing the punch work of code number

ATTENTION・ 1 to 15 digits as per your option can be encoded by PHA200-KLX.・ There is 32,768 combination.・ This mechanical lock gives you free order in punching work.Example : If code number 1-2-3 is set, you can unlock by punching either 1-2-3 or 2-3-1, 3-1-2, 1-3-2.

・ Basically, Just one time operation is enough.(Same button cannot be repeatedly pushed.) Example : Cannot set up like 1-1-2-3, 1-2-2-3.

In case lever handle does not stay at correct position, it means safety device is actuated to protect from the irregular attack by force.

Lever handle is equipped with safety device to protect from being opened by force.

If lever handle is operated by force without punching code numbers, safety device is actuated to protect inside mechanics and lever handle gets free turn and stops at upper or lower position like sketch shows.

This is not mechanical problem and return the lever handle to the normal position.(In horizontal level) Standard operation is functioned as usual.

⑤ ②

F r om i n s i d e

Unlock simply by pressing the ostArk.

one-point fastening (center latches)

Outside (KEYLEX4000) two-point fastening (upper and lower latches)

UNION ostARK+KEYLEX4000DOUBLE DOOR USESINGLE DOOR USE

A set of the ostArk Door Handle, which can be unlocked with just a push, and the Keylex Lever Handle, which requires no power supply and features an easy to change PIN number lock.

Dedicated Cover