druck- und laufrollen pressure rollers and cam followers · cam followers unsere rollen wurden...
TRANSCRIPT
372 Tel. +49 (0) 26 52 - 9 39 29 - 0 Fax +49 (0) 26 52 - 9 39 29 - 9 [email protected]
Seite / Page 374
Druck- und LaufrollenPressure rollers and
Cam followers
Unsere Rollen wurden speziell für die Getränke-industrie entwickelt und zeichnen sich, je nach Werkstoff, aus durch:
· Geringen Rollwiderstand · Höchste Laufruhe · Hohe Flächenpressung · Geringe Verformung · Gute dynamische Belastbarkeit
· Hohes Festigkeitsniveau
Our rollers are specially developed for the bottling industry and stand out, depending on material, due to characteristic features such as:
· Low rolling resistance · Silent running · High contact pressure · Low deformation · Good dynamic carrying capacity
· High stability levels
© Copyright by Oberrecht GmbH© Copyright by Oberrecht GmbH372
374 Tel. +49 (0) 26 52 - 9 39 29 - 0 Fax +49 (0) 26 52 - 9 39 29 - 9 [email protected]
Rolle, grünRoller, green
RolleRoller
5
Ø 12 Ø 30Ø 23
24
Ø 12 Ø 30
15
Ø a Ø A
B
RollenRollers
© Copyright by Oberrecht GmbH© Copyright by Oberrecht GmbH374
Artikel-Nr. / Part No.106.0161Material: Polyäthylen UHMW Polyethylene UHMWFarbe / Colour:
Artikel-Nr. / Part No.108.0001Material: Polyäthylen UHMW Polyethylene UHMWFarbe / Colour:
Artikel Nr. Part No.
Abmessungen / Dimensions in mm
Ø A Ø a B104.0026 20 6 10104.0216 25 12 12104.0218 30 8,5 17104.0010 30 12,5 22,7106.0077 49,5 14 13,5104.0217 50 24 39Material: Kunststoff / PlasticFarbe / Colour:
375Tel. +49 (0) 26 52 - 9 39 29 - 0 Fax +49 (0) 26 52 - 9 39 29 - 9 [email protected]
Unsere Rollen wurden speziell für die Getränkeindustrie entwickelt und zeichnen sich, je nach Werkstoff, aus durch:
· Geringen Rollwiderstand · Höchste Laufruhe · Hohe Flächenpressung · Geringe Verformung · Gute dynamische Belastbarkeit
· Hohes Festigkeitsniveau
Weitere Abmessungen auf Anfrage möglich.
Our rollers are specially developed for the bottling industry and stand out, depending on material, due to characteristic features such as:
· Low rolling resistance · Silent running · High contact pressure · Low deformation · Good dynamic carrying capacity
· High stability levels
Further dimensions upon request.
Druck- und Laufrollen
Lift rollers
RolleCam follower
SteuerrolleRoller
Ø 15 Ø 40
16
Ø d Ø 50
19
17
LaufrolleCam follower
Ø AØ a
B
© Copyright by Oberrecht GmbH© Copyright by Oberrecht GmbH 375
Artikel-Nr. / Part No.
112.0032Material: Belag aus Polyamid, Rollenlager Coating in polyamide, ball-bearing Farbe / Colour:
Artikel Nr. Part No.
Abmessungen / Dimensions in mm
Ø A Ø a B110.0040 40 12 16110.0003 60 20 20Material: Belag aus Polyamid, Rollenlager SKF / Coating in polyamide, ball-bearing SKFFarbe / Colour:
Artikel Nr. Part No.
Durchmesser / Diameterd in mm
106.0133 10106.0126 15Material: Polyurethan - Polyamid / Polyurethane - PolyamideFarbe / Colour:
376 Tel. +49 (0) 26 52 - 9 39 29 - 0 Fax +49 (0) 26 52 - 9 39 29 - 9 [email protected]
RolleRoller
KurvenrolleCam follower
14
14,5
Ø 31 Ø 22 Ø 26 Ø 50
Ø 20
21
Ø 50
DruckrolleRoller
17,9
16
Ø 13 Ø 50
© Copyright by Oberrecht GmbH© Copyright by Oberrecht GmbH376
Artikel-Nr. / Part No.106.0207Material: Kunststoff / PlasticFarbe / Colour:
Artikel-Nr. / Part No.106.0059-NOMaterial: Kunststoff / PlasticFarbe / Colour:
Artikel-Nr. / Part No.106.0105Material: Polyurethan - Polyamid Polyurethane - PolyamideFarbe / Colour:
377Tel. +49 (0) 26 52 - 9 39 29 - 0 Fax +49 (0) 26 52 - 9 39 29 - 9 [email protected]
Unsere Rollen wurden speziell für die Getränkeindustrie entwickelt und zeichnen sich, je nach Werkstoff, aus durch:
· Geringen Rollwiderstand · Höchste Laufruhe · Hohe Flächenpressung · Geringe Verformung · Gute dynamische Belastbarkeit
· Hohes Festigkeitsniveau
Weitere Abmessungen auf Anfrage möglich.
Our rollers are specially developed for the bottling industry and stand out, depending on material, due to characteristic features such as:
· Low rolling resistance · Silent running · High contact pressure · Low deformation · Good dynamic carrying capacity
· High stability levels
Further dimensions upon request.
Druck- und Laufrollen
Lift rollers
Rolle, D = 59Roller, D = 59
Rolle, D = 69Roller, D = 69
Ø 59Ø 28
34,9
Ø 28 Ø 69
34,9
Rolle, grünRoller, green
19
Ø 22 Ø 59
© Copyright by Oberrecht GmbH© Copyright by Oberrecht GmbH 377
Artikel-Nr. / Part No.
106.0292Material: Polyäthylen UHMW Polyethylene UHMWFarbe / Colour:
Artikel-Nr. / Part No.106.0247Material: Polyäthylen UHMW Polyethylene UHMWFarbe / Colour:
Artikel Nr. Part No. Material Farbe
Colour
106.0234 Polyäthylen UHMW Polyethylene UHMW
106.0234-B gleit- und verschleißoptimierter Sonder-Kunststoff wear and sliding optimised special plastic
378 Tel. +49 (0) 26 52 - 9 39 29 - 0 Fax +49 (0) 26 52 - 9 39 29 - 9 [email protected]
LaufrolleRoller
Huborgan-RolleRoller
22
Ø 26 Ø 70
27
22,3
Ø 30 Ø 72
20
Huborgan-RolleRoller 22
Ø 47 Ø 69,5Ø 31
30
© Copyright by Oberrecht GmbH© Copyright by Oberrecht GmbH378
Artikel-Nr. / Part No.106.0035-1Material: Kunststoff / PlasticFarbe / Colour:
Artikel-Nr. / Part No.106.0005Material: Kunststoff / PlasticFarben / Colours:
Artikel-Nr. / Part No.106.0251Material: Kunststoff / PlasticFarbe / Colour:
379Tel. +49 (0) 26 52 - 9 39 29 - 0 Fax +49 (0) 26 52 - 9 39 29 - 9 [email protected]
Unsere Rollen wurden speziell für die Getränkeindustrie entwickelt und zeichnen sich, je nach Werkstoff, aus durch:
· Geringen Rollwiderstand · Höchste Laufruhe · Hohe Flächenpressung · Geringe Verformung · Gute dynamische Belastbarkeit
· Hohes Festigkeitsniveau
Weitere Abmessungen auf Anfrage möglich.
Our rollers are specially developed for the bottling industry and stand out, depending on material, due to characteristic features such as:
· Low rolling resistance · Silent running · High contact pressure · Low deformation · Good dynamic carrying capacity
· High stability levels
Further dimensions upon request.
Druck- und Laufrollen
Lift rollers
AbzugsrollePull-down roller
KurvenrolleCam follower
26
27
Ø 34 Ø 75
Ø 75Ø 60
29
Ø 42
42
AbzugsrollePull-down roller
Ø 34 Ø 75
26
27
KurvenrolleCam follower
Ø 60
33,6
Ø 28
48
Ø 75
© Copyright by Oberrecht GmbH© Copyright by Oberrecht GmbH 379
Artikel-Nr. / Part No.
106.0307Material: Kunststoff / PlasticFarbe / Colour:
Artikel-Nr. / Part No.106.0007Material: Kunststoff / PlasticFarbe / Colour:
Artikel-Nr. / Part No.106.0006-1Material: Kunststoff / PlasticFarbe / Colour:
Artikel-Nr. / Part No.106.0030Material: Kunststoff / PlasticFarbe / Colour:
380 Tel. +49 (0) 26 52 - 9 39 29 - 0 Fax +49 (0) 26 52 - 9 39 29 - 9 [email protected]
Huborgan-Rolle, grünPull-down roller, green
Rolle, grünRoller, green
Ø 26 Ø 75
36
34,9
Ø 28 Ø 79
Rolle, grünRoller, green
Ø 75Ø 30
30
© Copyright by Oberrecht GmbH© Copyright by Oberrecht GmbH380
Artikel-Nr. / Part No.106.0291Material: Polyäthylen UHMW Polyethylene UHMWFarbe / Colour:
Artikel-Nr. / Part No.106.0162Material: Polyäthylen UHMW Polyethylene UHMWFarbe / Colour:
Artikel-Nr. / Part No.106.0295Material: Polyäthylen UHMW Polyethylene UHMWFarbe / Colour:
381Tel. +49 (0) 26 52 - 9 39 29 - 0 Fax +49 (0) 26 52 - 9 39 29 - 9 [email protected]
Unsere Rollen wurden speziell für die Getränkeindustrie entwickelt und zeichnen sich, je nach Werkstoff, aus durch:
· Geringen Rollwiderstand · Höchste Laufruhe · Hohe Flächenpressung · Geringe Verformung · Gute dynamische Belastbarkeit
· Hohes Festigkeitsniveau
Weitere Abmessungen auf Anfrage möglich.
Our rollers are specially developed for the bottling industry and stand out, depending on material, due to characteristic features such as:
· Low rolling resistance · Silent running · High contact pressure · Low deformation · Good dynamic carrying capacity
· High stability levels
Further dimensions upon request.
Druck- und Laufrollen
Lift rollers
AbzugsrollePull-down roller
Rolle, ohne LagerRoller, without ball-bearing
Ø 34 Ø 85
30
Ø 52 Ø 48 Ø 85
30
Rolle, D = 82Roller, D = 82
Ø 34 Ø 82
27
26
© Copyright by Oberrecht GmbH© Copyright by Oberrecht GmbH 381
Artikel-Nr. / Part No.
106.0156Material: Kunststoff / PlasticFarbe / Colour:
Artikel-Nr. / Part No.112.0024Material: Polyamid / PolyamideFarbe / Colour:
Artikel-Nr. / Part No.106.0047Material: Polyäthylen UHMW Polyethylene UHMWFarbe / Colour: